· 6 years ago · Oct 12, 2019, 05:24 PM
1[ 0.000000] Removed memory: created DMA memory pool at 0x000000008d600000, size 17 MiB
2[ 0.000000] Reserved memory: initialized node adsp_fw_region@0, compatible id removed-dma-pool
3[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e700000, size 7 MiB
4[ 0.000000] Reserved memory: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
5[ 0.000000] Reserved memory: allocated memory for 'venus_region@0' node: base 0x000000008f800000, size 8 MiB
6[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB
7[ 0.000000] Reserved memory: initialized node venus_region@0, compatible id shared-dma-pool
8[ 0.000000] Reserved memory: allocated memory for 'secure_region@0' node: base 0x00000000f6800000, size 152 MiB
9[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f6800000, size 152 MiB
10[ 0.000000] Reserved memory: initialized node secure_region@0, compatible id shared-dma-pool
11[ 0.000000] Reserved memory: allocated memory for 'qseecom_region@0' node: base 0x00000000f5800000, size 16 MiB
12[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5800000, size 16 MiB
13[ 0.000000] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool
14[ 0.000000] Reserved memory: allocated memory for 'adsp_region@0' node: base 0x00000000f5400000, size 4 MiB
15[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5400000, size 4 MiB
16[ 0.000000] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool
17[ 0.000000] Reserved memory: allocated memory for 'gpu_region@0' node: base 0x000000008f000000, size 8 MiB
18[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f000000, size 8 MiB
19[ 0.000000] Reserved memory: initialized node gpu_region@0, compatible id shared-dma-pool
20[ 0.000000] cma: Reserved 16 MiB at 0x00000000f4400000
21[ 0.000000] On node 0 totalpages: 772608
22[ 0.000000] DMA zone: 12288 pages used for memmap
23[ 0.000000] DMA zone: 0 pages reserved
24[ 0.000000] DMA zone: 772608 pages, LIFO batch:31
25[ 0.000000] psci: probing for conduit method from DT.
26[ 0.000000] psci: PSCIv1.0 detected in firmware.
27[ 0.000000] psci: Using standard PSCI v0.2 function IDs
28[ 0.000000] psci: Initializing psci_cpu_init
29[ 0.000000] psci: Initializing psci_cpu_init
30[ 0.000000] psci: Initializing psci_cpu_init
31[ 0.000000] psci: Initializing psci_cpu_init
32[ 0.000000] psci: Initializing psci_cpu_init
33[ 0.000000] psci: Initializing psci_cpu_init
34[ 0.000000] psci: Initializing psci_cpu_init
35[ 0.000000] reserved RAM buffer: mem_address:0x100000 mem_size:0xf4060000
36[ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc0b4191000 s22848 r8192 d30400 u61440
37[ 0.000000] pcpu-alloc: s22848 r8192 d30400 u61440 alloc=15*4096
38[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
39[ 0.000000] Detected VIPT I-cache on CPU0
40[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
41[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 760320
42[ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci earlycon=msm_hsl_uart,0x78af000 androidboot.selinux=permissive androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=d01687f7d150 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_ft8613_ebbg_5p7_720p_video:1:none:cfg:single_dsi board_id=S88567BC1:board_vol=476574
43[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
44[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
45[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
46[ 0.000000] Memory: 2660568K/3090432K available (15728K kernel code, 2877K rwdata, 8620K rodata, 532K init, 3858K bss, 220968K reserved, 208896K cma-reserved)
47[ 0.000000] Virtual kernel memory layout:
48[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
49[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
50[ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc3000000 ( 48 MB actual)
51[ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
52[ 0.000000] fixed : 0xffffffbffbdfb000 - 0xffffffbffbdff000 ( 16 KB)
53[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
54[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0c0000000 ( 3072 MB)
55[ 0.000000] .init : 0xffffffc001854000 - 0xffffffc0018d9000 ( 532 KB)
56[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000fde210 ( 15737 KB)
57[ 0.000000] .data : 0xffffffc0018ff000 - 0xffffffc001bce600 ( 2878 KB)
58[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
59[ 0.000000] HMP scheduling enabled.
60[ 0.000000] Preemptible hierarchical RCU implementation.
61[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
62
63[ 0.000000] **********************************************************
64[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
65[ 0.000000] ** **
66[ 0.000000] ** trace_printk() being used. Allocating extra memory. **
67[ 0.000000] ** **
68[ 0.000000] ** This means that this is a DEBUG kernel and it is **
69[ 0.000000] ** unsafe for produciton use. **
70[ 0.000000] ** **
71[ 0.000000] ** If you see this message and you are not debugging **
72[ 0.000000] ** the kernel, report this immediately to your vendor! **
73[ 0.000000] ** **
74[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
75[ 0.000000] **********************************************************
76[ 0.000000] NR_IRQS:64 nr_irqs:64 0
77[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
78[ 0.000000] MPM 1 irq mapping errored -517
79[ 0.000000] Offload RCU callbacks from all CPUs
80[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
81[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
82[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
83[ 0.000024] Switched to clocksource arch_sys_counter
84[ 0.003617] allocated 12582912 bytes of page_cgroup
85[ 0.003627] please try 'cgroup_disable=memory' option if you don't want memory cgroups
86[ 0.003642] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
87[ 0.003655] pid_max: default: 32768 minimum: 301
88[ 0.003774] Security Framework initialized
89[ 0.003808] SELinux: Initializing.
90[ 0.003858] SELinux: Starting in permissive mode
91[ 0.003911] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
92[ 0.003924] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
93[ 0.004775] Initializing cgroup subsys memory
94[ 0.004800] Initializing cgroup subsys freezer
95[ 0.005492] /cpus/cpu@0: Missing clock-frequency property
96[ 0.005509] /cpus/cpu@1: Missing clock-frequency property
97[ 0.005527] /cpus/cpu@2: Missing clock-frequency property
98[ 0.005545] /cpus/cpu@3: Missing clock-frequency property
99[ 0.005566] /cpus/cpu@100: Missing clock-frequency property
100[ 0.005588] /cpus/cpu@101: Missing clock-frequency property
101[ 0.005612] /cpus/cpu@102: Missing clock-frequency property
102[ 0.005638] /cpus/cpu@103: Missing clock-frequency property
103[ 0.005696] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
104[ 0.005743] EFI services will not be available.
105[ 0.005763] ASID allocator initialised with 32768 entries
106[ 0.027348] Core Debug Lock unlocked
107[ 0.028280] MSM Memory Dump base table set up
108[ 0.028305] MSM Memory Dump apps data table set up
109[ 0.028346] Configuring XPU violations to be fatal errors
110[ 0.029764] cpu_clock_pwr_init: Power clocks configured
111[ 0.035097] Detected VIPT I-cache on CPU1
112[ 0.035159] CPU1: Booted secondary processor [410fd034]
113[ 0.040149] Detected VIPT I-cache on CPU2
114[ 0.040190] CPU2: Booted secondary processor [410fd034]
115[ 0.045167] Detected VIPT I-cache on CPU3
116[ 0.045203] CPU3: Booted secondary processor [410fd034]
117[ 0.050247] Detected VIPT I-cache on CPU4
118[ 0.050305] CPU4: Booted secondary processor [410fd034]
119[ 0.055306] Detected VIPT I-cache on CPU5
120[ 0.055345] CPU5: Booted secondary processor [410fd034]
121[ 0.060392] Detected VIPT I-cache on CPU6
122[ 0.060431] CPU6: Booted secondary processor [410fd034]
123[ 0.065407] Detected VIPT I-cache on CPU7
124[ 0.065446] CPU7: Booted secondary processor [410fd034]
125[ 0.065633] Brought up 8 CPUs
126[ 0.065688] SMP: Total of 8 processors activated.
127[ 0.065782] alternatives: patching kernel code
128[ 0.069109] DMI not present or invalid.
129[ 0.078281] pinctrl core: initialized pinctrl subsystem
130[ 0.078885] regulator-dummy: no parameters
131[ 0.166644] NET: Registered protocol family 16
132[ 0.168752] ramoops: using module parameters
133[ 0.171269] console [pstore0] enabled
134[ 0.171426] pstore: Registered ramoops as persistent store backend
135[ 0.171439] ramoops: attached 0x100000@0xf4060000, ecc: 0/0
136[ 0.172410] msm_pm_tz_boot_init: set warmboot address failed
137[ 0.172438] scm_call failed: func id 0x42000101, ret: -1, syscall returns: 0x0, 0x0, 0x0
138[ 0.190121] cpuidle: using governor ladder
139[ 0.210115] cpuidle: using governor menu
140[ 0.230114] cpuidle: using governor qcom
141[ 0.231211] vdso: 2 pages (1 code @ ffffffc000fe4000, 1 data @ ffffffc001904000)
142[ 0.232092] software IO TLB: mapped [mem 0xee000000-0xee400000] (4MB)
143[ 0.233199] DMA: preallocated 256 KiB pool for atomic allocations
144[ 0.241129] __of_mpm_init(): MPM driver mapping exists
145[ 0.243923] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0
146[ 0.269893] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
147[ 0.275074] sps:sps is ready.
148[ 0.277428] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
149[ 0.277447] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
150[ 0.277466] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
151[ 0.277480] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
152[ 0.283653] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 6 PVS Version: 0
153[ 0.283765] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-mx regulator!!!
154[ 0.285022] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
155[ 0.285036] msm_rpm_dev_probe: APSS-RPM communication over SMD
156[ 0.287793] smd_channel_probe_now: allocation table not initialized
157[ 0.289271] smd_channel_probe_now: allocation table not initialized
158[ 0.290447] smd_channel_probe_now: allocation table not initialized
159[ 0.292252] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
160[ 0.292668] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
161[ 0.294025] msm-sn-fuse a0128.snfuse: SN interface initialized
162[ 0.294270] msm-secboot-fuse a41d0.secbootfuse: Secboot-fuse interface initialized
163[ 0.301026] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0
164[ 0.304386] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
165[ 0.308151] pm8953_s5: 400 <--> 1140 mV at 870 mV normal idle
166[ 0.308513] pm8953_s5_avs_limit: 400 <--> 1140 mV
167[ 0.308726] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us
168[ 0.316078] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
169[ 0.316686] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
170[ 0.317023] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
171[ 0.317758] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
172[ 0.320345] apc_mem_acc_corner: 0 <--> 0 mV
173[ 0.321685] cpr4_msm8953_apss_read_fuse_data: apc_corner: speed bin = 6
174[ 0.321701] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR fusing revision = 3
175[ 0.321714] cpr4_msm8953_apss_read_fuse_data: apc_corner: foundry id = 1
176[ 0.321726] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
177[ 0.321765] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
178[ 0.321913] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused LowSVS: open-loop= 625000 uV
179[ 0.321925] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 680000 uV
180[ 0.321936] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 755000 uV
181[ 0.321948] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV
182[ 0.322027] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused LowSVS: quot[ 7]= 575
183[ 0.322040] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 668, quot_offset[ 7]= 90
184[ 0.322053] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 827, quot_offset[ 7]= 155
185[ 0.322066] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1157, quot_offset[ 7]= 325
186[ 0.322418] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = 15, aging RO scale = 2800 QUOT/V
187[ 0.322616] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop
188[ 0.322789] apc_corner: 0 <--> 0 mV at 0 mV
189[ 0.324209] gfx_mem_acc_corner: 0 <--> 0 mV
190[ 0.324784] GFX_LDO: msm_gfx_ldo_parse_dt: Unable to parse CX parameters rc=-517
191[ 0.324796] GFX_LDO: msm_gfx_ldo_probe: Unable to pasrse dt rc=-517
192[ 0.343164] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
193[ 0.344166] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
194[ 0.344326] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
195[ 0.344338] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
196[ 0.344358] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
197[ 0.344371] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
198[ 0.344696] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 6 PVS Version: 0
199[ 0.344802] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-mx regulator!!!
200[ 0.344894] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
201[ 0.344907] msm_rpm_dev_probe: APSS-RPM communication over SMD
202[ 0.345766] pm8953_s1: 870 <--> 1156 mV at 1000 mV normal idle
203[ 0.346698] pm8953_s2_level: 0 <--> 0 mV at 0 mV normal idle
204[ 0.347324] pm8953_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle
205[ 0.347913] pm8953_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle
206[ 0.348751] pm8953_s3: 1225 mV normal idle
207[ 0.349563] pm8953_s4: 1900 <--> 2050 mV at 1900 mV normal idle
208[ 0.350463] pm8953_s7_level: 0 <--> 0 mV at 0 mV normal idle
209[ 0.351074] pm8953_s7_level_ao: 0 <--> 0 mV at 0 mV normal idle
210[ 0.351692] pm8953_s7_level_so: 0 <--> 0 mV at 0 mV normal idle
211[ 0.352504] pm8953_l1: 1000 <--> 1100 mV at 1000 mV normal idle
212[ 0.353346] pm8953_l2: 975 <--> 1225 mV at 975 mV normal idle
213[ 0.354169] pm8953_l3: 925 mV normal idle
214[ 0.355016] pm8953_l5: 1800 mV normal idle
215[ 0.355836] pm8953_l6: 1800 mV normal idle
216[ 0.356682] pm8953_l7: 1800 <--> 1900 mV at 1800 mV normal idle
217[ 0.357270] pm8953_l7_ao: 1800 <--> 1900 mV at 1800 mV normal idle
218[ 0.358120] pm8953_l8: 2900 mV normal idle
219[ 0.358934] pm8953_l9: 3000 <--> 3300 mV at 3000 mV normal idle
220[ 0.359780] pm8953_l10: 2850 mV normal idle
221[ 0.360636] pm8953_l11: 2950 mV normal idle
222[ 0.361489] pm8953_l12: 1800 <--> 2950 mV at 1800 mV normal idle
223[ 0.362297] pm8953_l13: 3125 mV normal idle
224[ 0.363129] pm8953_l16: 1800 mV normal idle
225[ 0.363944] pm8953_l17: 2850 mV normal idle
226[ 0.364796] pm8953_l19: 1200 <--> 1350 mV at 1200 mV normal idle
227[ 0.365609] pm8953_l22: 2900 mV normal idle
228[ 0.366452] pm8953_l23: 975 <--> 1225 mV at 975 mV normal idle
229[ 0.367384] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV
230[ 0.367398] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV
231[ 0.367410] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV
232[ 0.367428] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000
233[ 0.367440] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000
234[ 0.367452] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default
235[ 0.367779] msm_gfx_ldo: 0 <--> 0 mV at 0 mV
236[ 0.368125] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
237[ 0.369093] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
238[ 0.369877] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
239[ 0.369892] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
240[ 0.369907] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
241[ 0.369918] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
242[ 0.369928] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
243[ 0.372146] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
244[ 0.372161] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
245[ 0.372175] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
246[ 0.372187] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
247[ 0.372200] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
248[ 0.372211] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
249[ 0.372223] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
250[ 0.372234] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
251[ 0.399154] branch_clk_handoff: gcc_usb_phy_cfg_ahb_clk clock is enabled in HW
252[ 0.399173] branch_clk_handoff: even though ENABLE_BIT is not set
253[ 0.401541] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks
254[ 0.401831] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 6 PVS Version: 0
255[ 0.406149] cpr3_regulator_measure_aging: apc: average quotient delta=14 (count=10)
256[ 0.406178] cpr3_regulator_aging_adjust: apc: aging measurement successful; aging reference adjustment voltage=0 uV
257[ 0.407743] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0
258[ 0.407759] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0
259[ 0.407774] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0
260[ 0.407788] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0
261[ 0.407803] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0
262[ 0.407816] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0
263[ 0.407826] ramp_lmh_sid: Use Default LMH SID
264[ 0.407835] ramp_dfs_sid: Use Default DFS SID
265[ 0.407844] ramp_link_sid: Use Default Link SID
266[ 0.407913] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1
267[ 0.407927] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1
268[ 0.407941] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1
269[ 0.407955] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1
270[ 0.407969] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1
271[ 0.407982] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1
272[ 0.407991] ramp_lmh_sid: Use Default LMH SID
273[ 0.407999] ramp_dfs_sid: Use Default DFS SID
274[ 0.408008] ramp_link_sid: Use Default Link SID
275[ 0.408077] clock_rcgwr_init: RCGwR Init Completed
276[ 0.408571] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7)
277[ 0.408585] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1
278[ 0.408595] print_opp_table: clock_cpu: a53 C0: OPP voltage for 1804800000: 5
279[ 0.408605] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1
280[ 0.408614] print_opp_table: clock_cpu: a53 C2: OPP voltage for 1804800000: 5
281[ 0.411244] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks.
282[ 0.472309] qcom,qpnp-pin qpnp-pin-16: qpnp_pin_probe: no device nodes specified in topology
283[ 0.472341] qcom,qpnp-pin: probe of qpnp-pin-16 failed with error -22
284[ 0.472740] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
285[ 0.472763] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
286[ 0.476859] KPI: Bootloader start count = 22616
287[ 0.476876] KPI: Bootloader end count = 70468
288[ 0.476885] KPI: Bootloader display count = 34984
289[ 0.476894] KPI: Bootloader load kernel count = 2249
290[ 0.476904] KPI: Kernel MPM timestamp = 94504
291[ 0.476912] KPI: Kernel MPM Clock frequency = 32768
292[ 0.476941] socinfo_print: v0.10, id=338, ver=1.1, raw_id=154, raw_ver=0, hw_plat=8, hw_plat_ver=65536
293[ 0.476941] accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=2 serial_number=7707369
294[ 0.478272] eldo2_8953: no parameters
295[ 0.478751] qpnp_pin_of_gpio_xlate: no such PMIC gpio 5 in device topology
296[ 0.478892] adv_vreg: no parameters
297[ 0.479367] vdd_vreg: no parameters
298[ 0.480138] iovdd_gpio_vreg: no parameters
299[ 0.480704] vgaarb: loaded
300[ 0.482085] SCSI subsystem initialized
301[ 0.483241] usbcore: registered new interface driver usbfs
302[ 0.483331] usbcore: registered new interface driver hub
303[ 0.483590] usbcore: registered new device driver usb
304[ 0.485127] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
305[ 0.485498] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
306[ 0.485512] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
307[ 0.487209] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
308[ 0.487500] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
309[ 0.487515] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
310[ 0.487817] i2c-msm-v2 78b7000.i2c: irq:176 when no active transfer
311[ 0.489402] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
312[ 0.489678] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
313[ 0.489692] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
314[ 0.490996] i2c-msm-v2 7af8000.i2c: probing driver i2c-msm-v2
315[ 0.491239] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
316[ 0.491253] i2c-msm-v2 7af8000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
317[ 0.492871] media: Linux media interface: v0.10
318[ 0.492955] Linux video capture interface: v2.00
319[ 0.493059] EDAC MC: Ver: 3.0.0
320[ 0.600260] cpufreq: driver msm up and running
321[ 0.600394] aw2013 led driver: initialize.aw2013_led_probe start
322[ 0.730061] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
323[ 0.731071] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
324[ 0.731287] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
325[ 0.731534] ION heap system created
326[ 0.731702] ION heap mm created at 0x00000000f6800000 with size 9800000
327[ 0.731716] ION heap qsecom created at 0x00000000f5800000 with size 1000000
328[ 0.732396] msm_bus_fabric_init_driver
329[ 0.743860] heming add qpnp_pon_probe
330[ 0.743934] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
331[ 0.743952] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
332[ 0.744125] input: qpnp_pon as /devices/virtual/input/input0
333[ 0.744658] heming add qpnp_pon_probe end
334[ 0.744708] heming add qpnp_pon_probe
335[ 0.744800] pon_spare_reg: no parameters
336[ 0.744880] qcom,qpnp-power-on qpnp-power-on-14: No PON config. specified
337[ 0.744931] qcom,qpnp-power-on qpnp-power-on-14: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
338[ 0.744948] qcom,qpnp-power-on qpnp-power-on-14: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
339[ 0.745006] heming add qpnp_pon_probe end
340[ 0.745143] PMIC@SID0: (null) v1.0 options: 2, 2, 0, 0
341[ 0.745244] PMIC@SID2: PMI8940 v2.0 options: 0, 0, 0, 0
342[ 0.746204] ipa ipa2_uc_state_check:296 uC interface not initialized
343[ 0.746218] ipa ipa_sps_irq_control_all:942 EP (2) not allocated.
344[ 0.746225] ipa ipa_sps_irq_control_all:942 EP (5) not allocated.
345[ 0.747704] sps:BAM 0x0000000007904000 is registered.
346[ 0.748290] sps:BAM 0x0000000007904000 (va:0xffffff8001840000) enabled: ver:0x27, number of pipes:20
347[ 0.751823] IPA driver initialization was successful.
348[ 0.753124] gdsc_venus: no parameters
349[ 0.753432] gdsc_mdss: no parameters
350[ 0.753689] gdsc_jpeg: no parameters
351[ 0.754131] gdsc_vfe: no parameters
352[ 0.754563] gdsc_vfe1: no parameters
353[ 0.754818] gdsc_cpp: no parameters
354[ 0.755035] gdsc_oxili_gx: no parameters
355[ 0.755128] gdsc_oxili_gx: supplied by msm_gfx_ldo
356[ 0.755365] gdsc_venus_core0: fast normal
357[ 0.755574] gdsc_oxili_cx: no parameters
358[ 0.755762] gdsc_usb30: no parameters
359[ 0.757005] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
360[ 0.757014] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
361[ 0.757033] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
362[ 0.757755] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
363[ 0.757788] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
364[ 0.757795] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
365[ 0.757811] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
366[ 0.758927] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
367[ 0.759393] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
368[ 0.759978] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001e00000, with 21 ctx banks
369[ 0.766551] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context adsp_elf using bank 0
370[ 0.766722] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1
371[ 0.766880] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2
372[ 0.767041] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3
373[ 0.767193] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
374[ 0.767349] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5
375[ 0.767505] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6
376[ 0.767686] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8
377[ 0.767866] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context q6 using bank 9
378[ 0.768043] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10
379[ 0.768226] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11
380[ 0.768403] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15
381[ 0.768584] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16
382[ 0.768763] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17
383[ 0.768942] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18
384[ 0.769123] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19
385[ 0.769307] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20
386[ 0.769490] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21
387[ 0.769669] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22
388[ 0.769848] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context ipa using bank 24
389[ 0.770044] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23
390[ 0.772810] arm-smmu 1c40000.arm,smmu-kgsl: regulator defer delay 80
391[ 0.775070] Advanced Linux Sound Architecture Driver Initialized.
392[ 0.775793] aw87319_pa_init Enter
393[ 0.810295] i2c-msm-v2 7af8000.i2c: msm_bus_scale_register_client(mstr-id:84):0x2 (ok)
394[ 0.830333] AW87319 CHIPID=0x9b
395[ 0.850543] Bluetooth: ffffffc0af44fcf8
396[ 0.850581] NET: Registered protocol family 31
397[ 0.850587] Bluetooth: ffffffc0af44fcf8
398[ 0.850597] Bluetooth: ffffffc0af44fcd8Bluetooth: ffffffc0af44fcb8
399[ 0.850633] Bluetooth: ffffffc0af44fcb8<6>[ 0.850960] cfg80211: Calling CRDA to update world regulatory domain
400[ 0.850980] cfg80211: World regulatory domain updated:
401[ 0.850986] cfg80211: DFS Master region: unset
402[ 0.850991] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
403[ 0.850999] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
404[ 0.851005] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
405[ 0.851011] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
406[ 0.851017] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
407[ 0.851023] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
408[ 0.851029] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
409[ 0.851034] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
410[ 0.851040] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
411[ 0.851142] pcie:pcie_init.
412[ 0.853014] ibb_reg: 4600 <--> 6000 mV at 5800 mV
413[ 0.853286] lab_reg: 4600 <--> 6000 mV at 5800 mV
414[ 0.853822] Switched to clocksource arch_sys_counter
415[ 0.895638] NET: Registered protocol family 2
416[ 0.896078] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
417[ 0.896256] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
418[ 0.896596] TCP: Hash tables configured (established 32768 bind 32768)
419[ 0.896648] TCP: reno registered
420[ 0.896658] UDP hash table entries: 2048 (order: 4, 65536 bytes)
421[ 0.896714] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
422[ 0.896919] NET: Registered protocol family 1
423[ 0.896951] PCI: CLS 0 bytes, default 64
424[ 0.898636] gcc-mdss-8953 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks.
425[ 0.899290] Trying to unpack rootfs image as initramfs...
426[ 0.921915] Freeing initrd memory: 984K
427[ 0.926089] futex hash table entries: 2048 (order: 5, 131072 bytes)
428[ 0.926162] Initialise system trusted keyring
429[ 0.926223] audit: initializing netlink subsys (disabled)
430[ 0.926268] audit: type=2000 audit(0.919:1): initialized
431[ 0.926656] vmscan: error setting kswapd cpu affinity mask
432[ 0.930632] zbud: loaded
433[ 0.931177] VFS: Disk quotas dquot_6.5.2
434[ 0.931280] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
435[ 0.932683] Registering sdcardfs 0.1
436[ 0.933229] ntfs: driver 2.1.31 [Flags: R/O].
437[ 0.933387] fuse init (API version 7.23)
438[ 0.933895] SELinux: Registering netfilter hooks
439[ 0.935955] Key type asymmetric registered
440[ 0.935966] Asymmetric key parser 'x509' registered
441[ 0.936081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
442[ 0.936091] io scheduler noop registered
443[ 0.936100] io scheduler deadline registered
444[ 0.936247] io scheduler cfq registered (default)
445[ 0.940819] adv7533_parse_vreg_dt: error read post on sleep. rc=-22
446[ 0.940831] adv7533_parse_vreg_dt: hpd-5v-en min=0, max=0, enable=0 disable=0 post-on-sleep=0
447[ 0.941276] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x0d1300c8 OPER:0x00000010
448[ 0.941298] msm_dba_helper_i2c_read: i2c read failed
449[ 0.941305] adv7533_read: read err: addr 0x39, reg 0x0, size 0x1
450[ 0.941310] adv7533_probe: Failed to read chip rev
451[ 0.941388] adv7533: probe of 2-0039 failed with error -5
452[ 0.941964] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
453[ 0.941974] mdss_mdp_probe+0x27c/0x139c->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
454[ 0.942523] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
455[ 0.943182] No change in context(0==0), skip
456[ 0.943861] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
457[ 0.943881] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
458[ 0.943887] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
459[ 0.943904] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
460[ 0.943919] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
461[ 0.943931] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
462[ 0.944026] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
463[ 0.944302] xlog_status: enable:1, panic:1, dump:2
464[ 0.945058] mdss_mdp_probe: mdss version = 0x10100000, bootloader display is on, num 1, intf_sel=0x00000100
465[ 0.945888] mdss_rotator_init_queue: work thread name=rot_thread_0
466[ 0.947818] mdss_smmu_util_parse_dt_clock: clocks are not defined
467[ 0.947871] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
468[ 0.947899] mdss_smmu_util_parse_dt_clock: clocks are not defined
469[ 0.947932] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
470[ 0.949521] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
471[ 0.949536] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
472[ 0.949549] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
473[ 0.950369] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
474[ 0.950835] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_ft8613_ebbg_5p7_720p_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_ft8613_ebbg_5p7_720p_video
475[ 0.950923] mdss_dsi_panel_init: Panel Name = ft8613_ebbg_5p7_720p_video
476[ 0.951047] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_ft8613_ebbg_5p7_720p_video" (ffffffc0af44f278)
477[ 0.951069] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
478[ 0.951078] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
479[ 0.951083] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
480[ 0.951175] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
481[ 0.951183] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
482[ 0.951191] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-warm-command
483[ 0.951201] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-cool-command
484[ 0.951209] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-nature-command
485[ 0.951218] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-ce-std-command
486[ 0.951227] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-ce-vivid-command
487[ 0.951235] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-ce-bright-command
488[ 0.951256] mdss_dsi_parse_panel_features: ulps feature disabled
489[ 0.951263] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
490[ 0.951270] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
491[ 0.951333] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
492[ 0.951341] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
493[ 0.951451] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
494[ 0.951463] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
495[ 0.951473] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
496[ 0.951484] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
497[ 0.951774] mdss_dsi_parse_ctrl_params:4072 Unable to read qcom,display-id, data=0000000000000000,len=20
498[ 0.951783] mdss_dsi_parse_gpio_params:4107, TE gpio not specified
499[ 0.951789] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
500[ 0.951855] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
501[ 0.951867] mdss_dsi_retrieve_ctrl_resources+0x170/0x254->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
502[ 0.951873] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8000ff6000 ctrl_size=400 phy_base=ffffff8000ffc400 phy_size=580
503[ 0.951969] dsi_panel_device_register: Continuous splash enabled
504[ 0.952408] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
505[ 0.954157] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x2
506[ 0.954402] mdss_dsi_status_init: DSI status check interval:5000
507[ 0.955910] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
508[ 0.956759] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
509[ 0.957387] mdss_fb_register: FrameBuffer[0] 720x1440 registered successfully!
510[ 0.957917] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
511[ 0.958015] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
512[ 0.958098] mdss_mdp_splash_parse_dt: splash mem child node is not present
513[ 0.962013] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
514[ 0.962047] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
515[ 0.966722] In memshare_probe, Memshare probe success
516[ 0.969739] msm_rpm_log_probe: OK
517[ 0.971269] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped.
518[ 0.973374] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
519[ 0.977714] msm_serial_hs module loaded
520[ 0.988401] ------------[ cut here ]------------
521[ 0.988423] WARNING: CPU: 7 PID: 1 at ../../../../../../kernel/xiaomi/msm8953/drivers/gpu/msm/kgsl_pwrctrl.c:2075 kgsl_pwrctrl_clk_set_rate+0x48/0x58()
522[ 0.988429] KGSL:rbbmtimer_clk set freq -22 failed:-22
523[ 0.988434] Modules linked in:
524[ 0.988445] CPU: 7 PID: 1 Comm: swapper/0 Not tainted 3.18.131-Teamlions-g82311c9f199 #1
525[ 0.988449] Hardware name: Qualcomm Technologies, Inc. SDM450 QRD (DT)
526[ 0.988455] Call trace:
527[ 0.988464] [<ffffffc00008984c>] dump_backtrace+0x0/0x27c
528[ 0.988471] [<ffffffc000089adc>] show_stack+0x14/0x1c
529[ 0.988479] [<ffffffc000fcabcc>] dump_stack+0x80/0xa4
530[ 0.988486] [<ffffffc0000a3ec4>] warn_slowpath_common+0x88/0xac
531[ 0.988491] [<ffffffc0000a3f48>] warn_slowpath_fmt+0x60/0x80
532[ 0.988498] [<ffffffc0005bcac8>] kgsl_pwrctrl_clk_set_rate+0x48/0x58
533[ 0.988505] [<ffffffc0005c0d84>] kgsl_pwrctrl_init+0x2e4/0x700
534[ 0.988513] [<ffffffc0005ae074>] kgsl_device_platform_probe+0xf8/0x578
535[ 0.988520] [<ffffffc0005e824c>] adreno_probe+0x58c/0x6dc
536[ 0.988528] [<ffffffc0005f80c4>] platform_drv_probe+0x38/0x84
537[ 0.988534] [<ffffffc0005f623c>] driver_probe_device+0x164/0x37c
538[ 0.988540] [<ffffffc0005f64b8>] __driver_attach+0x64/0x90
539[ 0.988546] [<ffffffc0005f505c>] bus_for_each_dev+0x80/0xb0
540[ 0.988552] [<ffffffc0005f5c38>] driver_attach+0x20/0x28
541[ 0.988558] [<ffffffc0005f5780>] bus_add_driver+0x138/0x240
542[ 0.988564] [<ffffffc0005f7070>] driver_register+0x94/0xe0
543[ 0.988570] [<ffffffc0005f800c>] __platform_driver_register+0x60/0x68
544[ 0.988577] [<ffffffc0018903a8>] kgsl_3d_init+0x3c/0x64
545[ 0.988583] [<ffffffc000082b6c>] do_one_initcall+0x194/0x1b0
546[ 0.988591] [<ffffffc001854bb4>] kernel_init_freeable+0x1a8/0x25c
547[ 0.988599] [<ffffffc000fc4258>] kernel_init+0x10/0xf4
548[ 0.988615] ---[ end trace 48a5503fc85943fd ]---
549[ 0.990258] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0
550[ 0.996619] brd: module loaded
551[ 0.998425] loop: module loaded
552[ 0.998704] zram: Created 1 device(s) ...
553[ 0.999295] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1001000
554[ 0.999325] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
555[ 0.999334] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
556[ 0.999341] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
557[ 1.000015] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
558[ 1.002501] i2c-core: driver [tabla-i2c-core] using legacy suspend method
559[ 1.002509] i2c-core: driver [tabla-i2c-core] using legacy resume method
560[ 1.002589] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
561[ 1.002594] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
562[ 1.002675] i2c-core: driver [tasha-i2c-core] using legacy suspend method
563[ 1.002680] i2c-core: driver [tasha-i2c-core] using legacy resume method
564[ 1.003393] nq-nci 5-0028: ese GPIO <OPTIONAL> error getting from OF node
565[ 1.003562] nq-nci 5-0028: nqx_probe: ese gpio not provided
566[ 1.004189] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000
567[ 1.004200] qce 720000.qcedev: CE device = 0x0
568[ 1.004200] IO base, CE = 0xffffff8001cc0000
569[ 1.004200] Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
570[ 1.004200] IO base BAM = 0x0000000000000000
571[ 1.004200] BAM IRQ 195
572[ 1.004200] Engines Availability = 0x2010853
573[ 1.004403] sps:BAM 0x0000000000704000 is registered.
574[ 1.004583] sps:BAM 0x0000000000704000 (va:0xffffff8001f40000) enabled: ver:0x27, number of pipes:8
575[ 1.004704] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 195
576[ 1.006447] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000
577[ 1.006458] qcrypto 720000.qcrypto: CE device = 0x0
578[ 1.006458] IO base, CE = 0xffffff8002040000
579[ 1.006458] Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
580[ 1.006458] IO base BAM = 0x0000000000000000
581[ 1.006458] BAM IRQ 195
582[ 1.006458] Engines Availability = 0x2010853
583[ 1.006624] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 195
584[ 1.007152] qcrypto 720000.qcrypto: qcrypto-ecb-aes
585[ 1.007243] qcrypto 720000.qcrypto: qcrypto-cbc-aes
586[ 1.007333] qcrypto 720000.qcrypto: qcrypto-ctr-aes
587[ 1.007417] qcrypto 720000.qcrypto: qcrypto-ecb-des
588[ 1.007499] qcrypto 720000.qcrypto: qcrypto-cbc-des
589[ 1.007582] qcrypto 720000.qcrypto: qcrypto-ecb-3des
590[ 1.007664] qcrypto 720000.qcrypto: qcrypto-cbc-3des
591[ 1.007746] qcrypto 720000.qcrypto: qcrypto-xts-aes
592[ 1.007829] qcrypto 720000.qcrypto: qcrypto-sha1
593[ 1.007912] qcrypto 720000.qcrypto: qcrypto-sha256
594[ 1.007996] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
595[ 1.008083] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
596[ 1.008168] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
597[ 1.008251] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
598[ 1.008334] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
599[ 1.008417] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
600[ 1.008501] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
601[ 1.008583] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
602[ 1.008667] qcrypto 720000.qcrypto: qcrypto-aes-ccm
603[ 1.008750] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
604[ 1.008756] qcrypto: FIPS140-2 Known Answer Tests: Skipped
605[ 1.010251] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
606[ 1.010411] ICE IRQ = 196
607[ 1.011750] SCSI Media Changer driver v0.25
608[ 1.013309] spi_master spi6: will run message pump with realtime priority
609[ 1.014007] sps: BAM device 0x0000000007ac4000 is not registered yet.
610[ 1.014200] sps:BAM 0x0000000007ac4000 is registered.
611[ 1.014927] sps:BAM 0x0000000007ac4000 (va:0xffffff8001ca0000) enabled: ver:0x19, number of pipes:12
612[ 1.016231] tun: Universal TUN/TAP device driver, 1.6
613[ 1.016237] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
614[ 1.016308] PPP generic driver version 2.4.2
615[ 1.016398] PPP BSD Compression module registered
616[ 1.016408] PPP Deflate Compression module registered
617[ 1.016437] PPP MPPE Compression module registered
618[ 1.016451] NET: Registered protocol family 24
619[ 1.017339] wcnss_wlan probed in built-in mode
620[ 1.018395] usbcore: registered new interface driver asix
621[ 1.018468] usbcore: registered new interface driver ax88179_178a
622[ 1.018506] usbcore: registered new interface driver cdc_ether
623[ 1.018545] usbcore: registered new interface driver net1080
624[ 1.018583] usbcore: registered new interface driver cdc_subset
625[ 1.018620] usbcore: registered new interface driver zaurus
626[ 1.018784] usbcore: registered new interface driver cdc_ncm
627[ 1.019218] msm_sharedmem: sharedmem_register_qmi: qmi init successful
628[ 1.020242] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
629[ 1.020250] hyp_assign_table: Failed to assign memory protection, ret = -5
630[ 1.020258] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f4800000 size=1572864 err=-5
631[ 1.020361] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
632[ 1.022911] 78000.ssphy supply core not found, using dummy regulator
633[ 1.022967] (NULL device *): unable to set voltage for core_ldo
634[ 1.027660] msm-dwc3 7000000.ssusb: unable to get dbm device
635[ 1.029906] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
636[ 1.030404] ehci-pci: EHCI PCI platform driver
637[ 1.030466] ehci-msm: Qualcomm On-Chip EHCI Host Controller
638[ 1.030950] usbcore: registered new interface driver cdc_acm
639[ 1.030956] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
640[ 1.031009] usbcore: registered new interface driver usb-storage
641[ 1.031041] usbcore: registered new interface driver ums-alauda
642[ 1.031078] usbcore: registered new interface driver ums-cypress
643[ 1.031110] usbcore: registered new interface driver ums-datafab
644[ 1.031142] usbcore: registered new interface driver ums-freecom
645[ 1.031174] usbcore: registered new interface driver ums-isd200
646[ 1.031205] usbcore: registered new interface driver ums-jumpshot
647[ 1.031238] usbcore: registered new interface driver ums-karma
648[ 1.031270] usbcore: registered new interface driver ums-sddr09
649[ 1.031302] usbcore: registered new interface driver ums-sddr55
650[ 1.031334] usbcore: registered new interface driver ums-usbat
651[ 1.031419] usbcore: registered new interface driver usbserial
652[ 1.031457] usbcore: registered new interface driver usb_ehset_test
653[ 1.032062] gbridge_init: gbridge_init successs.
654[ 1.032496] mousedev: PS/2 mouse device common for all mice
655[ 1.032685] usbcore: registered new interface driver xpad
656[ 1.034188] [FTS][Info]Lcdname:ft8613_ebbg_5p7_720p_video
657
658[ 1.034196] [FTS][Info]x_min:0 y_min:0 x_max:720 y_max:1440
659[ 1.034211] [FTS][Error]Unable to get max-touch-number
660[ 1.034348] input: fts_ts as /devices/soc/78b7000.i2c/i2c-3/3-0038/input/input1
661[ 1.034418] [FTS][Info]CHIP TYPE ID = 0x8613
662[ 1.050319] 3-0038 supply vcc_i2c not found, using dummy regulator
663[ 1.060306] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0xf (ok)
664[ 1.060430] i2c-msm-v2 7af5000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x28 MSTR_STS:0x001321c4 OPER:0x00000090
665[ 1.060460] nq-nci 5-0028: nfcc_hw_check: - i2c_master_send Error
666[ 1.060467] nq-nci 5-0028: nfcc_hw_check: - NFCC HW not available
667[ 1.060565] ------------[ cut here ]------------
668[ 1.060578] WARNING: CPU: 1 PID: 6 at ../../../../../../kernel/xiaomi/msm8953/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x2c/0x50()
669[ 1.060582] invalid GPIO -22
670[ 1.060587] Modules linked in:
671[ 1.060598] CPU: 1 PID: 6 Comm: kworker/u16:0 Tainted: G W 3.18.131-Teamlions-g82311c9f199 #1
672[ 1.060603] Hardware name: Qualcomm Technologies, Inc. SDM450 QRD (DT)
673[ 1.060617] Workqueue: events_unbound async_run_entry_fn
674[ 1.060623] Call trace:
675[ 1.060633] [<ffffffc00008984c>] dump_backtrace+0x0/0x27c
676[ 1.060639] [<ffffffc000089adc>] show_stack+0x14/0x1c
677[ 1.060647] [<ffffffc000fcabcc>] dump_stack+0x80/0xa4
678[ 1.060654] [<ffffffc0000a3ec4>] warn_slowpath_common+0x88/0xac
679[ 1.060660] [<ffffffc0000a3f48>] warn_slowpath_fmt+0x60/0x80
680[ 1.060665] [<ffffffc0003ee504>] gpio_to_desc+0x2c/0x50
681[ 1.060671] [<ffffffc0003efd5c>] gpio_free+0xc/0x18
682[ 1.060679] [<ffffffc000652a6c>] nqx_probe+0xa30/0xadc
683[ 1.060687] [<ffffffc000812004>] i2c_device_probe+0xdc/0x110
684[ 1.060695] [<ffffffc0005f623c>] driver_probe_device+0x164/0x37c
685[ 1.060701] [<ffffffc0005f64b8>] __driver_attach+0x64/0x90
686[ 1.060706] [<ffffffc0005f505c>] bus_for_each_dev+0x80/0xb0
687[ 1.060712] [<ffffffc0005f5c38>] driver_attach+0x20/0x28
688[ 1.060718] [<ffffffc0005f43e8>] driver_attach_async+0x14/0x4c
689[ 1.060724] [<ffffffc0000c1d18>] async_run_entry_fn+0x7c/0x164
690[ 1.060732] [<ffffffc0000bac04>] process_one_work+0x270/0x40c
691[ 1.060738] [<ffffffc0000bb3ec>] worker_thread+0x324/0x448
692[ 1.060745] [<ffffffc0000bf62c>] kthread+0xe4/0xec
693[ 1.060750] ---[ end trace 48a5503fc85943fe ]---
694[ 1.060764] nq-nci 5-0028: nqx_probe: probing nqxx failed, check hardware
695[ 1.290253] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x10 (ok)
696[ 1.290624] [FTS][Info]TP Ready, Device ID = 0x86
697[ 1.290796] [FTS][Info]Create proc entry success!
698[ 1.290832] [FTS][Info][EX]: sysfs_create_group() succeeded!!
699[ 1.290837] [FTS][Mode]create sysfs succeeded
700[ 1.290849] [FTS]Created proc entry /proc/onoff !
701[ 1.290856] [FTS]Created proc entry /proc/data !
702[ 1.290999] [FTS][Info][ESD]: ESD check start!!
703[ 1.291339] [FTS][Info]vendor_id=0xd0
704
705[ 1.291345] [FTS][Info]tp_fw=0x9
706
707[ 1.291352] [FTS][TEST][Info]fts_test_init. line: 827. Test version: V1.0.0--2016-12-28, (sync version of FT_MultipleTest: V4.0.0.0 ------ 2016-07-18)
708
709[ 1.310373] [FTS][Info]tpd_probe, ft8716_ctpm_LockDownInfo_get_from_boot, tp_lockdown_info=41373201d1003200
710
711[ 1.310398] [FTS][Info]Normal mode
712
713[ 1.310495] [FTS][UPGRADE]******************************FTS enter upgrade******************************
714[ 1.310501] [FTS][Info][ESD]: ESD check stop!!
715[ 1.310508] [FTS][UPGRADE]********************check upgrade need or not********************
716[ 1.310832] [FTS][UPGRADE]: chip_id = 8613, chip_types.chip_idh = 8613
717[ 1.310837] [FTS][UPGRADE]: fw_status = 1!!
718[ 1.310842] [FTS][Info][UPGRADE]**********FW APP valid**********
719[ 1.310848] [FTS][UPGRADE]FW FILE:CTPM_FW, SIZE:e740
720[ 1.310927] [FTS8006m][Info]Lcdname:ft8613_ebbg_5p7_720p_video
721
722[ 1.310935] [FTS8006m][Info]x_min:0 y_min:0 x_max:720 y_max:1440
723[ 1.310952] [FTS8006m][Error]Unable to get max-touch-number
724[ 1.311009] [FTS][UPGRADE]: uc_tp_fm_ver = 0x9, uc_host_fm_ver = 0x9!!
725[ 1.311014] [FTS][UPGRADE]**********Don't need upgrade fw**********
726[ 1.311019] [FTS][UPGRADE]**********bUpgradeFlag = 0x0**********
727[ 1.311023] [FTS][UPGRADE]**********No Upgrade, exit**********
728[ 1.311028] [FTS][Info][ESD]: ESD check start!!
729[ 1.311037] [FTS][UPGRADE]******************************FTS exit upgrade******************************
730[ 1.311128] input: ft8006m_ts as /devices/soc/78b7000.i2c/i2c-3/3-0039/input/input2
731[ 1.311197] [FTS8006m][Info]CHIP TYPE ID = 0x8006
732[ 1.311203] [FTS8006m][Error][GPIO]irq gpio request failed
733[ 1.311208] [FTS8006m][Error][GPIO]Failed to configure the gpios
734[ 1.340150] ft8006m_ts: probe of 3-0039 failed with error -16
735[ 1.341516] [radio_frequence]: radio frequence detection probe start
736[ 1.341666] input: radio_frequence as /devices/soc/soc:radio_frequence/input/input3
737[ 1.341879] [radio_frequence]: radio frequence detection probe end
738[ 1.342289] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
739[ 1.342441] i2c /dev entries driver
740[ 1.352346] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
741[ 1.354766] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
742[ 1.355621] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
743[ 1.356291] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
744[ 1.358605] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
745[ 1.359843] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
746[ 1.361103] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
747[ 1.362054] msm_actuator_platform_probe:1988 No valid actuator GPIOs data
748[ 1.363028] msm_eeprom_platform_probe qcom,eeprom-name ovt_ov12a10_i, rc 0
749[ 1.363105] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
750[ 1.376419] msm_cci_init:1439: hw_version = 0x10020005
751[ 1.376446] the eeprom is not insensor!
752[ 1.377437] eeprom ovt_ov12a10_i read module id 7match id for ovt_ov12a10_i module_id=7
753[ 2.178082] msm_eeprom_platform_probe qcom,eeprom-name sony_imx486_ii, rc 0
754[ 2.178159] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
755[ 2.191811] msm_cci_init:1439: hw_version = 0x10020005
756[ 2.191836] the eeprom is not insensor!
757[ 2.192824] eeprom sony_imx486_ii read module id 7
758[ 2.192829] msm_eeprom_platform_probe match id for sony_imx486_ii failed
759[ 2.205424] msm_eeprom_platform_probe qcom,eeprom-name ovt_ov5675_i, rc 0
760[ 2.205513] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
761[ 2.246121] msm_cci_init:1439: hw_version = 0x10020005
762[ 2.246147] insensor eeprom todo init the otp register!
763[ 2.246153] eeprom_init_ov5675_reg_otp 45 E
764[ 2.246597] msm_cci_irq:1797 MASTER_1 error 0x20000000
765[ 2.740064] msm_cci_wait: 301 wait for queue: 0
766[ 2.740081] msm_cci_transfer_end: 548 failed rc -110
767[ 2.740086] msm_cci_data_queue: 808 failed rc -110
768[ 2.740092] msm_camera_cci_i2c_write: line 144 rc = -110
769[ 2.760042] i2c write faild
770[ 2.760059] msm_cci_i2c_read:955 read_words = 0, exp words = 1
771[ 2.760064] msm_cci_i2c_read_bytes:1038 failed rc -22
772[ 2.760069] msm_camera_cci_i2c_read: line 56 rc = -22
773[ 2.760074] eeprom match otp id failed! map valid data is 0 !
774[ 2.760079] eeprom ovt_ov5675_i read module id 65535
775[ 2.760083] msm_eeprom_platform_probe match id for ovt_ov5675_i failed
776[ 2.798853] msm_eeprom_platform_probe qcom,eeprom-name ovt_ov5675_ii, rc 0
777[ 2.798944] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
778[ 2.840518] msm_cci_init:1439: hw_version = 0x10020005
779[ 2.840543] insensor eeprom todo init the otp register!
780[ 2.840549] eeprom_init_ov5675_reg_otp 45 E
781[ 2.920042] eeprom_init_ov5675_reg_otp : 70 X
782[ 2.921028] eeprom ovt_ov5675_ii read module id 7
783[ 2.939644] match id for ovt_ov5675_ii module_id=7
784[ 2.979635] msm_flash_get_dt_data:1121 No valid flash GPIOs data
785[ 2.979879] LED trigger switch_trigger failed to register (-17)
786[ 2.979953] msm_flash_get_dt_data:1121 No valid flash GPIOs data
787[ 2.980083] ------------[ cut here ]------------
788[ 2.980097] WARNING: CPU: 0 PID: 1 at ../../../../../../kernel/xiaomi/msm8953/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x80()
789[ 2.980103] sysfs: cannot create duplicate filename '/class/leds/flashlight'
790[ 2.980108] Modules linked in:
791[ 2.980120] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.131-Teamlions-g82311c9f199 #1
792[ 2.980124] Hardware name: Qualcomm Technologies, Inc. SDM450 QRD (DT)
793[ 2.980130] Call trace:
794[ 2.980140] [<ffffffc00008984c>] dump_backtrace+0x0/0x27c
795[ 2.980146] [<ffffffc000089adc>] show_stack+0x14/0x1c
796[ 2.980155] [<ffffffc000fcabcc>] dump_stack+0x80/0xa4
797[ 2.980161] [<ffffffc0000a3ec4>] warn_slowpath_common+0x88/0xac
798[ 2.980167] [<ffffffc0000a3f48>] warn_slowpath_fmt+0x60/0x80
799[ 2.980173] [<ffffffc0002249dc>] sysfs_warn_dup+0x68/0x80
800[ 2.980180] [<ffffffc000224d18>] sysfs_do_create_link_sd.isra.2+0x9c/0xb4
801[ 2.980187] [<ffffffc000224d64>] sysfs_create_link+0x34/0x3c
802[ 2.980194] [<ffffffc0005f335c>] device_add+0x260/0x55c
803[ 2.980200] [<ffffffc0005f37fc>] device_create_groups_vargs+0xb0/0xf4
804[ 2.980206] [<ffffffc0005f3950>] device_create_with_groups+0x5c/0x7c
805[ 2.980214] [<ffffffc0009efe40>] led_classdev_register+0x44/0x15c
806[ 2.980221] [<ffffffc0008beeec>] msm_flash_platform_probe+0x320/0x3c8
807[ 2.980229] [<ffffffc0005f80c4>] platform_drv_probe+0x38/0x84
808[ 2.980235] [<ffffffc0005f623c>] driver_probe_device+0x164/0x37c
809[ 2.980241] [<ffffffc0005f64b8>] __driver_attach+0x64/0x90
810[ 2.980247] [<ffffffc0005f505c>] bus_for_each_dev+0x80/0xb0
811[ 2.980253] [<ffffffc0005f5c38>] driver_attach+0x20/0x28
812[ 2.980259] [<ffffffc0005f5780>] bus_add_driver+0x138/0x240
813[ 2.980265] [<ffffffc0005f7070>] driver_register+0x94/0xe0
814[ 2.980271] [<ffffffc0005f800c>] __platform_driver_register+0x60/0x68
815[ 2.980280] [<ffffffc001899404>] msm_flash_init_module+0x58/0xbc
816[ 2.980286] [<ffffffc000082b6c>] do_one_initcall+0x194/0x1b0
817[ 2.980294] [<ffffffc001854bb4>] kernel_init_freeable+0x1a8/0x25c
818[ 2.980302] [<ffffffc000fc4258>] kernel_init+0x10/0xf4
819[ 2.980307] ---[ end trace 48a5503fc85943ff ]---
820[ 2.980335] msm_torch_create_classdev:135 Failed to register 0 led dev. rc = -17
821[ 2.980347] qcom,camera-flash: probe of soc:qcom,camera-flash@0 failed with error -17
822[ 2.981693] adp1660 i2c_add_driver success
823[ 2.988110] MSM-CPP cpp_init_hardware:1016 CPP HW Version: 0x40030003
824[ 2.988124] MSM-CPP cpp_init_hardware:1034 stream_cnt:0
825[ 2.990672] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
826[ 2.990680] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
827[ 2.992138] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
828[ 2.992146] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
829[ 3.001037] __msm_jpeg_init:1537] Jpeg Device id 0
830[ 3.004389] FG: get_area_version: Normal version!
831[ 3.004509] FG: fg_check_ima_exception: Initial ima_err_sts=0 ima_exp_sts=0 ima_hw_sts=22
832[ 3.006104] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=64
833[ 3.008298] unable to find DT imem DLOAD mode node
834[ 3.009144] unable to find DT imem EDLOAD mode node
835[ 3.011109] thermal thermal_zone1: failed to read out thermal zone 1
836[ 3.011294] thermal thermal_zone2: failed to read out thermal zone 2
837[ 3.011473] thermal thermal_zone3: failed to read out thermal zone 3
838[ 3.033478] device-mapper: uevent: version 1.0.3
839[ 3.033649] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
840[ 3.033760] device-mapper: req-crypt: dm-req-crypt successfully initalized.
841
842[ 3.034893] sdhci: Secure Digital Host Controller Interface driver
843[ 3.034899] sdhci: Copyright(c) Pierre Ossman
844[ 3.034906] sdhci-pltfm: SDHCI platform and OF driver helper
845[ 3.035980] qcom_ice_get_pdevice: found ice device ffffffc0acb69200
846[ 3.035988] qcom_ice_get_pdevice: matching platform device ffffffc0ae6d0400
847[ 3.040189] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8001af0000
848[ 3.040630] sdhci_msm 7824900.sdhci: No vmmc regulator found
849[ 3.040637] sdhci_msm 7824900.sdhci: No vqmmc regulator found
850[ 3.041008] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode
851[ 3.070246] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
852[ 3.084871] sdhci_msm 7864900.sdhci: No vmmc regulator found
853[ 3.084880] sdhci_msm 7864900.sdhci: No vqmmc regulator found
854[ 3.085239] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode
855[ 3.106179] mmc0: Out-of-interrupt timeout is 100[ms]
856[ 3.106184] mmc0: BKOPS_EN equals 0x2
857[ 3.106190] mmc0: eMMC FW version: 0x01
858[ 3.106195] mmc0: CMDQ supported: depth: 16
859[ 3.106200] mmc0: cache barrier support 0 flush policy 0
860[ 3.114148] msm8953-pinctrl 1000000.pinctrl: pin GPIO_20 already requested by 7af6000.spi; cannot claim for soc:gpio-leds
861[ 3.114157] msm8953-pinctrl 1000000.pinctrl: pin-20 (soc:gpio-leds) status -22
862[ 3.114164] msm8953-pinctrl 1000000.pinctrl: could not request pin 20 (GPIO_20) from group gpio20 on device 1000000.pinctrl
863[ 3.114171] leds-gpio soc:gpio-leds: Error applying setting, reverse things back
864[ 3.114337] msm8953-pinctrl 1000000.pinctrl: pin GPIO_20 already requested by 7af6000.spi; cannot claim for soc:gpio-leds
865[ 3.114345] msm8953-pinctrl 1000000.pinctrl: pin-20 (soc:gpio-leds) status -22
866[ 3.114352] msm8953-pinctrl 1000000.pinctrl: could not request pin 20 (GPIO_20) from group gpio20 on device 1000000.pinctrl
867[ 3.114358] leds-gpio soc:gpio-leds: Error applying setting, reverse things back
868[ 3.114369] leds-gpio soc:gpio-leds: pins are not configured from the driver
869[ 3.114731] qcom,leds-qpnp: probe of leds-qpnp-20 failed with error -10
870[ 3.115918] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 253952 slot-sz: 24
871[ 3.116125] mmc0: CMDQ enabled on card
872[ 3.116136] mmc0: new HS400 MMC card at address 0001
873[ 3.116457] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2
874[ 3.116466] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2
875[ 3.116602] mmcblk0: mmc0:0001 GD6BMB 29.1 GiB
876[ 3.116714] mmcblk0rpmb: mmc0:0001 GD6BMB partition 3 4.00 MiB
877[ 3.117391] hidraw: raw HID events driver (C) Jiri Kosina
878[ 3.117713] tz_log 8600720.tz-log: Hyp log service is not supported
879[ 3.118005] usbcore: registered new interface driver usbhid
880[ 3.118010] usbhid: USB HID core driver
881[ 3.118480] ashmem: initialized
882[ 3.118683] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49
883[ 3.119097] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
884[ 3.125322] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
885[ 3.128882] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
886[ 3.129175] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
887[ 3.131680] sensors-ssc soc:qcom,msm-ssc-sensors: msm_ssc_sensors_dt_parse: get qdsp timer cntpct hi offset fail
888[ 3.131691] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_init_sysfs: Could not parse dt
889[ 3.132504] input: uinput-goodix as /devices/virtual/input/input4
890[ 3.132576] gf_spi: version V1.2.10
891[ 3.132711] gf_spi: status = 0x0
892[ 3.133449] fpc1020 soc:fpc1020: fpc1020_probe: ok
893[ 3.133561] fpc1020_init OK
894[ 3.133766] usbcore: registered new interface driver snd-usb-audio
895[ 3.150548] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
896[ 3.157264] u32 classifier
897[ 3.157272] Actions configured
898[ 3.157307] Netfilter messages via NETLINK v0.30.
899[ 3.157357] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
900[ 3.157670] ctnetlink v0.93: registering with nfnetlink.
901[ 3.158252] xt_time: kernel timezone is -0000
902[ 3.158498] ip_tables: (C) 2000-2006 Netfilter Core Team
903[ 3.158672] arp_tables: (C) 2002 David S. Miller
904[ 3.158727] TCP: cubic registered
905[ 3.158737] Initializing XFRM netlink socket
906[ 3.159047] NET: Registered protocol family 10
907[ 3.159931] mip6: Mobile IPv6
908[ 3.159958] ip6_tables: (C) 2000-2006 Netfilter Core Team
909[ 3.160117] sit: IPv6 over IPv4 tunneling driver
910[ 3.160506] NET: Registered protocol family 17
911[ 3.160528] NET: Registered protocol family 15
912[ 3.160561] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
913[ 3.160571] Ebtables v2.0 registered
914[ 3.160688] l2tp_core: L2TP core driver, V2.0
915[ 3.160704] l2tp_ppp: PPPoL2TP kernel driver, V2.0
916[ 3.160713] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
917[ 3.160733] l2tp_netlink: L2TP netlink interface
918[ 3.160761] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
919[ 3.160795] l2tp_debugfs: L2TP debugfs support
920[ 3.160804] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
921[ 3.161585] NET: Registered protocol family 27
922[ 3.166434] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
923[ 3.168137] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
924[ 3.171844] sps:BAM 0x0000000007104000 is registered.
925[ 3.175280] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8940@2/qcom,qpnp-smbcharger IO resource absent!
926[ 3.175471] smbcharger_charger_otg: no parameters
927[ 3.175575] SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb enable 0
928[ 3.176433] smbchg_hw_init:read OTG_CFG=78
929[ 3.231070] battery powe supply creat attr file!!
930[ 3.234039] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8940@2/qcom,qpnp-smbcharger IO resource absent!
931[ 3.234835] qpnp-smbcharger qpnp-smbcharger-17: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=0
932[ 3.236472] EDAC DEVICE0: Giving out device to module soc:arm64-cpu-erp controller cache: DEV soc:arm64-cpu-erp (INTERRUPT)
933[ 3.236918] ARM64 CPU ERP: Could not find <cci-irq> IRQ property. Proceeding anyway.
934[ 3.236924] ARM64 CPU ERP: SBE detection is disabled.
935[ 3.238351] Registered cp15_barrier emulation handler
936[ 3.238372] Registered setend emulation handler
937[ 3.238703] Loading compiled-in X.509 certificates
938[ 3.240461] Loaded X.509 cert 'Magrathea: Glacier signing key: ad311b9ee2ac9c34a4cadf1582e2441cc1e44c9d'
939[ 3.240491] registered taskstats version 1
940[ 3.241863] Key type encrypted registered
941[ 3.244202] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped.
942[ 3.247109] RNDIS_IPA module is loaded.
943[ 3.247862] file system registered
944[ 3.247916] mbim_init: initialize 1 instances
945[ 3.247978] mbim_init: Initialized 1 ports
946[ 3.249301] rndis_qc_init: initialize rndis QC instance
947[ 3.249504] Number of LUNs=8
948[ 3.249515] Mass Storage Function, version: 2009/09/11
949[ 3.249522] LUN: removable file: (no medium)
950[ 3.249537] Number of LUNs=1
951[ 3.249581] LUN: removable file: (no medium)
952[ 3.249585] Number of LUNs=1
953[ 3.249866] android_usb gadget: android_usb ready
954[ 3.251769] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input5
955[ 3.252251] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-01-01 01:17:22 UTC (4642)
956[ 3.257239] msm-core initialized without polling period
957[ 3.261827] parse_cpu_levels: idx 1 276
958[ 3.261845] calculate_residency: residency < 0 for LPM
959[ 3.262006] parse_cpu_levels: idx 1 286
960[ 3.262013] calculate_residency: residency < 0 for LPM
961[ 3.263994] msm-usb-ssphy-qmp 78000.ssphy: unable to set voltage for core_ldo
962[ 3.266418] qcom,qpnp-flash-led qpnp-flash-led-23: Unable to acquire pinctrl
963[ 3.267368] msm-dwc3 7000000.ssusb: DWC3 in low power mode
964[ 3.269620] rmnet_ipa started initialization
965[ 3.269628] IPA SSR support = True
966[ 3.269633] IPA ipa-loaduC = True
967[ 3.269638] IPA SG support = True
968[ 3.271884] ipa ipa_sps_irq_control_all:942 EP (5) not allocated.
969[ 3.271896] ipa ipa2_uc_state_check:301 uC is not loaded
970[ 3.272889] rmnet_ipa completed initialization
971[ 3.276443] qcom,cc-debug-8953 1874000.qcom,cc-debug: Registered Debug Mux successfully
972[ 3.288085] msm8952-asoc-wcd c051000.sound: default codec configured
973[ 3.291946] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
974[ 3.291997] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
975[ 3.293722] apc_mem_acc_corner: disabling
976[ 3.293733] gfx_mem_acc_corner: disabling
977[ 3.293774] adv_vreg: disabling
978[ 3.293780] vdd_vreg: disabling
979[ 3.293824] clock_late_init: Removing enables held for handed-off clocks
980[ 3.297949] ALSA device list:
981[ 3.297956] No soundcards found.
982[ 3.298024] Warning: unable to open an initial console.
983[ 3.344256] mmc1: new ultra high speed DDR50 SDHC card at address aaaa
984[ 3.344550] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2
985[ 3.344561] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2
986[ 3.344687] mmcblk1: mmc1:aaaa SS16G 14.8 GiB
987[ 3.346708] Freeing unused kernel memory: 532K
988[ 3.346758] Freeing alternatives memory: 112K
989[ 3.347045] mmcblk1: p1
990[ 3.359387] msm8952-asoc-wcd c051000.sound: default codec configured
991[ 3.363537] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
992[ 3.363585] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
993[ 4.528477] FG: fg_batt_profile_init: wingtech init FG_DATA_BATT_ID =337120
994[ 5.674240] EXT3-fs (mmcblk0p49): error: couldn't mount because of unsupported optional features (40)
995[ 5.674582] EXT2-fs (mmcblk0p49): error: couldn't mount because of unsupported optional features (40)
996[ 5.677998] EXT4-fs (mmcblk0p49): mounted filesystem with ordered data mode. Opts: (null)
997[ 5.712484] enable_store: android_usb: already disabled
998[ 6.214224] dwc3 7000000.dwc3: ep0out: Unable to dequeue while in LPM
999[ 6.215979] rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
1000[ 6.216013] android_usb gadget: using random self ethernet address
1001[ 6.216022] android_usb gadget: using random host ethernet address
1002[ 6.216519] rndis0: MAC ca:1b:65:27:18:0e
1003[ 6.216526] rndis0: HOST MAC 46:9c:80:8a:51:e9
1004[ 6.251354] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
1005[ 6.520087] FG: fg_batt_profile_init: wingtech init FG_DATA_BATT_ID =337120
1006[ 6.520200] of_batterydata_get_best_profile: WT batt_id = 337
1007[ 6.520215] of_batterydata_get_best_profile: D1-qrd-sunwoda-4v4-3300mah found
1008[ 6.530433] FG: fg_batt_profile_init: Battery SOC: 56, V: 3843361uV
1009[ 6.530929] of_batterydata_get_best_profile: WT batt_id = 337
1010[ 6.530939] of_batterydata_get_best_profile: D1-qrd-sunwoda-4v4-3300mah found
1011[ 7.308279] dwc3 7000000.dwc3: ep0out: Unable to dequeue while in LPM
1012[ 7.313284] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1013[ 7.380169] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1014[ 7.380853] rndis_function_bind_config: rndis_function_bind_config MAC: 46:9C:80:8A:51:E9
1015[ 7.380885] android_usb gadget: using random self ethernet address
1016[ 7.380891] android_usb gadget: using previous host ethernet address
1017[ 7.381376] rndis0: MAC 7e:bd:2a:de:c7:e9
1018[ 7.381384] rndis0: HOST MAC 46:9c:80:8a:51:e9
1019[ 7.921224] dwc3 7000000.dwc3: ep0out: Unable to dequeue while in LPM
1020[ 7.921782] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1021[ 7.990154] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1022[ 7.992022] rndis_function_bind_config: rndis_function_bind_config MAC: 46:9C:80:8A:51:E9
1023[ 7.992052] android_usb gadget: using random self ethernet address
1024[ 7.992058] android_usb gadget: using previous host ethernet address
1025[ 7.992548] rndis0: MAC c6:fd:10:a3:68:02
1026[ 7.992555] rndis0: HOST MAC 46:9c:80:8a:51:e9
1027[ 8.205612] dwc3 7000000.dwc3: ep0out: Unable to dequeue while in LPM
1028[ 8.206179] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1029[ 8.260157] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1030[ 8.260571] rndis_function_bind_config: rndis_function_bind_config MAC: 46:9C:80:8A:51:E9
1031[ 8.260606] android_usb gadget: using random self ethernet address
1032[ 8.260612] android_usb gadget: using previous host ethernet address
1033[ 8.261021] rndis0: MAC 7a:9f:a3:e1:cd:b4
1034[ 8.261027] rndis0: HOST MAC 46:9c:80:8a:51:e9
1035[ 8.302696] dwc3 7000000.dwc3: ep0out: Unable to dequeue while in LPM
1036[ 8.303232] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1037[ 8.370444] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
1038[ 8.371781] rndis_function_bind_config: rndis_function_bind_config MAC: 46:9C:80:8A:51:E9
1039[ 8.371815] android_usb gadget: using random self ethernet address
1040[ 8.371822] android_usb gadget: using previous host ethernet address
1041[ 8.372337] rndis0: MAC ae:d6:db:9b:36:9c
1042[ 8.372343] rndis0: HOST MAC 46:9c:80:8a:51:e9
1043[ 8.414521] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
1044[ 8.456435] random: init-debug urandom read with 62 bits of entropy available
1045[ 9.507114] EXT4-fs (mmcblk0p49): re-mounted. Opts: (null)
1046[ 17.978673] sps: BAM device 0x0000000007884000 is not registered yet.
1047[ 17.978906] sps:BAM 0x0000000007884000 is registered.
1048[ 17.979127] sps:BAM 0x0000000007884000 (va:0xffffff8002260000) enabled: ver:0x19, number of pipes:12
1049[ 109.561213] random: nonblocking pool is initialized
1050[ 157.700065] [FTS][Info][ESD]: In interrupt state, not check esd, return immediately!!
1051[ 600.282771] msm-usb-ssphy-qmp 78000.ssphy: unable to set voltage for core_ldo
1052[ 600.285973] msm-dwc3 7000000.ssusb: DWC3 exited from low power mode
1053[ 600.285993] Client 28 passed invalid index: 2
1054[ 600.286000] msm-dwc3 7000000.ssusb: Fail to vote for bus. error code: -6
1055[ 600.585216] msm-dwc3 7000000.ssusb: Avail curr from USB = 3
1056[ 600.665281] android_work: android_work: sent uevent USB_STATE=CONNECTED
1057[ 600.669119] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1058[ 600.773228] android_work: android_work: sent uevent USB_STATE=CONNECTED
1059[ 600.776654] android_usb gadget: high-speed config #1: 86000c8.android_usb
1060[ 600.776799] msm-dwc3 7000000.ssusb: Avail curr from USB = 500
1061[ 600.776918] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1062[ 600.830056] android_work: android_work: sent uevent USB_STATE=CONFIGURED