· 6 years ago · Feb 08, 2020, 08:42 PM
1 scanning usb for storage devices... init_part() 282: PART_TYPE_DOS
21 Storage Device(s) found
3reading s905_autoscript
41760 bytes read in 27 ms (63.5 KiB/s)
5## Executing script at 01020000
6reading Image
722452232 bytes read in 1963 ms (10.9 MiB/s)
8reading uInitrd
97396318 bytes read in 681 ms (10.4 MiB/s)
10reading uEnv.ini
11279 bytes read in 26 ms (9.8 KiB/s)
12reading /dtbs/amlogic/meson-gxl-s905x-khadas-vim.dtb
1339183 bytes read in 49 ms (780.3 KiB/s)
14libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
15[rsvmem] fdt get prop fail.
16## Loading init Ramdisk from Legacy Image at 13000000 ...
17 Image Name: uInitrd Image
18 Image Type: AArch64 Linux RAMDisk Image (uncompressed)
19 Data Size: 7396254 Bytes = 7.1 MiB
20 Load Address: 00000000
21 Entry Point: 00000000
22 Verifying Checksum ... OK
23Start read misc partition datas!
24info->magic =
25info->version_major = 1
26info->version_minor = 0
27info->slots[0].priority = 15
28info->slots[0].tries_remaining = 7
29info->slots[0].successful_boot = 0
30info->slots[1].priority = 14
31info->slots[1].tries_remaining = 7
32info->slots[1].successful_boot = 0
33info->crc32 = -1075449479
34active slot = 0
35active_slot is normal
36load dtb from 0x1000000 ......
37 Amlogic multi-dtb tool
38 Single dtb detected
39## Flattened Device Tree blob at 01000000
40 Booting using the fdt blob at 0x1000000
41find 1 dtbos
42No androidboot.dtbo_idx configured
43And no dtbos will be applied
44libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
45[rsvmem] fdt get prop fail.
46 Loading Ramdisk to 7375a000, end 73e67b9e ... OK
47 Loading Device Tree to 000000001fff3000, end 000000001ffffac4 ... OK
48fdt_instaboot: no instaboot image
49
50Starting kernel ...
51
52uboot time: 8783407 us
53[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
54[ 0.000000] Linux version 5.5.0-0.6 (spikerguy@Manjaro) (gcc version 9.2.0 (GCC)) #1 SMP Sat Feb 8 21:57:40
55[ 0.000000] Machine model: Khadas VIM
56[ 0.000000] OF: reserved mem: node linux,cma compatible matching fail
57[ 0.000000] psci: probing for conduit method from DT.
58[ 0.000000] psci: PSCIv0.2 detected in firmware.
59[ 0.000000] psci: Using standard PSCI v0.2 function IDs
60[ 0.000000] psci: Trusted OS migration not required
61[ 0.000000] percpu: Embedded 22 pages/cpu s49176 r8192 d32744 u90112
62[ 0.000000] Detected VIPT I-cache on CPU0
63[ 0.000000] CPU features: detected: ARM erratum 845719
64[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 470336
65[ 0.000000] Kernel command line: root=LABEL=ROOT rootflags=data=writeback rw console=ttyAML0,115200n8 consh
66[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
67[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
68[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
69[ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
70[ 0.000000] Memory: 1775648K/1911808K available (13054K kernel code, 1062K rwdata, 5156K rodata, 2624K ini)
71[ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x78/0x148 with crng_init=0
72[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
73[ 0.000000] rcu: Hierarchical RCU implementation.
74[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
75[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
76[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
77[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
78[ 0.000000] GIC: Using split EOI/Deactivate mode
79[ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
80[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
81[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 44s
82[ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
83[ 0.000265] Console: colour dummy device 80x25
84[ 0.000448] printk: console [tty0] enabled
85[ 0.000486] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj)
86[ 0.000502] pid_max: default: 32768 minimum: 301
87[ 0.000633] LSM: Security Framework initializing
88[ 0.000680] SELinux: Initializing.
89[ 0.000757] *** VALIDATE SELinux ***
90[ 0.000816] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
91[ 0.000837] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
92[ 0.000896] *** VALIDATE tmpfs ***
93[ 0.001282] *** VALIDATE proc ***
94[ 0.001482] *** VALIDATE cgroup1 ***
95[ 0.001494] *** VALIDATE cgroup2 ***
96[ 0.002085] ASID allocator initialised with 32768 entries
97[ 0.002158] rcu: Hierarchical SRCU implementation.
98[ 0.004477] smp: Bringing up secondary CPUs ...
99[ 0.004950] Detected VIPT I-cache on CPU1
100[ 0.005003] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
101[ 0.005496] Detected VIPT I-cache on CPU2
102[ 0.005538] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
103[ 0.006008] Detected VIPT I-cache on CPU3
104[ 0.006043] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
105[ 0.006112] smp: Brought up 1 node, 4 CPUs
106[ 0.006163] SMP: Total of 4 processors activated.
107[ 0.006173] CPU features: detected: 32-bit EL0 Support
108[ 0.006182] CPU features: detected: CRC32 instructions
109[ 0.019844] CPU: All CPU(s) started at EL2
110[ 0.019934] alternatives: patching kernel code
111[ 0.021200] devtmpfs: initialized
112[ 0.026871] Registered cp15_barrier emulation handler
113[ 0.026900] Registered setend emulation handler
114[ 0.026912] KASLR disabled due to lack of seed
115[ 0.027118] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
116[ 0.027140] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
117[ 0.027427] pinctrl core: initialized pinctrl subsystem
118[ 0.027831] thermal_sys: Registered thermal governor 'step_wise'
119[ 0.028294] NET: Registered protocol family 16
120[ 0.028818] DMA: preallocated 256 KiB pool for atomic allocations
121[ 0.028847] audit: initializing netlink subsys (disabled)
122[ 0.029001] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1
123[ 0.029488] cpuidle: using governor ladder
124[ 0.029596] cpuidle: using governor menu
125[ 0.029826] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
126[ 0.030526] Serial: AMBA PL011 UART driver
127[ 0.042819] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
128[ 0.042841] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
129[ 0.042851] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
130[ 0.042860] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
131[ 0.045363] cryptd: max_cpu_qlen set to 1000
132[ 0.050883] iommu: Default domain type: Translated
133[ 0.051195] SCSI subsystem initialized
134[ 0.051401] usbcore: registered new interface driver usbfs
135[ 0.051439] usbcore: registered new interface driver hub
136[ 0.051542] usbcore: registered new device driver usb
137[ 0.051959] pps_core: LinuxPPS API ver. 1 registered
138[ 0.051969] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
139[ 0.052418] Advanced Linux Sound Architecture Driver Initialized.
140[ 0.053292] clocksource: Switched to clocksource arch_sys_counter
141[ 0.053324] *** VALIDATE bpf ***
142[ 0.053566] VFS: Disk quotas dquot_6.6.0
143[ 0.053620] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
144[ 0.053737] FS-Cache: Loaded
145[ 0.053746] *** VALIDATE ramfs ***
146[ 0.053770] *** VALIDATE hugetlbfs ***
147[ 0.058989] NET: Registered protocol family 2
148[ 0.059454] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
149[ 0.059499] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
150[ 0.059614] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
151[ 0.059819] TCP: Hash tables configured (established 16384 bind 16384)
152[ 0.059957] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
153[ 0.060010] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
154[ 0.060207] NET: Registered protocol family 1
155[ 0.060632] RPC: Registered named UNIX socket transport module.
156[ 0.060649] RPC: Registered udp transport module.
157[ 0.060656] RPC: Registered tcp transport module.
158[ 0.060663] RPC: Registered tcp NFSv4.1 backchannel transport module.
159[ 0.060841] Trying to unpack rootfs image as initramfs...
160[ 0.350174] Freeing initrd memory: 7220K
161[ 0.350942] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
162[ 0.588994] Initialise system trusted keyrings
163[ 0.589212] workingset: timestamp_bits=46 max_order=19 bucket_order=0
164[ 0.595664] squashfs: version 4.0 (2009/01/31) Phillip Lougher
165[ 0.596019] FS-Cache: Netfs 'nfs' registered for caching
166[ 0.596518] NFS: Registering the id_resolver key type
167[ 0.596551] Key type id_resolver registered
168[ 0.596559] Key type id_legacy registered
169[ 0.596572] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
170[ 0.596581] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
171[ 0.597747] FS-Cache: Netfs 'cifs' registered for caching
172[ 0.598090] Key type cifs.spnego registered
173[ 0.598110] Key type cifs.idmap registered
174[ 0.598469] JFS: nTxBlock = 8192, nTxLock = 65536
175[ 0.602782] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
176[ 0.604170] *** VALIDATE xfs ***
177[ 0.604233] 9p: Installing v9fs 9p2000 file system support
178[ 0.604558] ocfs2: Registered cluster interface o2cb
179[ 0.604785] OCFS2 User DLM kernel interface loaded
180[ 0.606228] *** VALIDATE gfs2 ***
181[ 0.606481] gfs2: GFS2 installed
182[ 0.624644] NET: Registered protocol family 38
183[ 0.624675] Key type asymmetric registered
184[ 0.624683] Asymmetric key parser 'x509' registered
185[ 0.624747] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
186[ 0.624760] io scheduler mq-deadline registered
187[ 0.624767] io scheduler kyber registered
188[ 0.624959] io scheduler bfq registered
189[ 0.634575] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected
190[ 0.637905] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
191[ 0.639490] Serial: AMBA driver
192[ 0.639850] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 10, base_baud = 1500000) is a meson_uart
193[ 0.640003] serial serial0: tty port ttyAML6 registered
194[ 0.640219] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 15, base_baud = 1500000) is a meson_uart
195[ 1.439558] printk: console [ttyAML0] enabled
196[ 1.444437] c81004e0.serial: ttyAML2 at MMIO 0xc81004e0 (irq = 16, base_baud = 1500000) is a meson_uart
197[ 1.461981] brd: module loaded
198[ 1.462109] loop: module loaded
199[ 1.471495] Loading iSCSI transport class v2.0-870.
200[ 1.471897] iscsi: registered transport (tcp)
201[ 1.476096] libphy: Fixed MDIO Bus: probed
202[ 1.479330] tun: Universal TUN/TAP device driver, 1.6
203[ 1.485582] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
204[ 1.490720] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
205[ 1.496908] meson8b-dwmac c9410000.ethernet: PTP uses main clock
206[ 1.502763] meson8b-dwmac c9410000.ethernet: no reset control found
207[ 1.509441] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
208[ 1.516060] meson8b-dwmac c9410000.ethernet: DWMAC1000
209[ 1.521224] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
210[ 1.528634] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
211[ 1.536050] meson8b-dwmac c9410000.ethernet: COE Type 2
212[ 1.541224] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
213[ 1.548210] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
214[ 1.554630] meson8b-dwmac c9410000.ethernet: Normal descriptors
215[ 1.560460] meson8b-dwmac c9410000.ethernet: Ring mode enabled
216[ 1.566238] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
217[ 1.574351] libphy: stmmac: probed
218[ 1.579361] dwc3 c9000000.dwc3: Failed to get clk 'ref': -2
219[ 1.583893] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
220[ 1.589557] ehci-platform: EHCI generic platform driver
221[ 1.594867] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
222[ 1.600834] ohci-platform: OHCI generic platform driver
223[ 1.606573] usbcore: registered new interface driver usb-storage
224[ 1.612168] mousedev: PS/2 mouse device common for all mice
225[ 1.618114] i2c /dev entries driver
226[ 1.624091] sdhci: Secure Digital Host Controller Interface driver
227[ 1.627062] sdhci: Copyright(c) Pierre Ossman
228[ 1.631376] Synopsys Designware Multimedia Card Interface Driver
229[ 1.638654] meson-gx-mmc d0072000.mmc: Got CD GPIO
230[ 1.666571] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
231[ 1.693219] sdhci-pltfm: SDHCI platform and OF driver helper
232[ 1.694266] ledtrig-cpu: registered to indicate activity on CPUs
233[ 1.699676] meson-sm: secure-monitor enabled
234[ 1.704056] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
235[ 1.711373] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
236[ 1.729345] hid: raw HID events driver (C) Jiri Kosina
237[ 1.729709] usbcore: registered new interface driver usbhid
238[ 1.734398] usbhid: USB HID core driver
239[ 1.738771] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
240[BL31]: tee size: 0
241[ 1.753222] NET: Registered protocol family 10
242[ 1.754030] Segment Routing with IPv6
243[ 1.755708] NET: Registered protocol family 17
244[ 1.760374] 9pnet: Installing 9P2000 support
245[ 1.764415] Key type dns_resolver registered
246[ 1.768922] Loading compiled-in X.509 certificates
247[ 1.773346] Key type ._fscrypt registered
248[ 1.777223] Key type .fscrypt registered
249[ 1.795730] Key type encrypted registered
250[ 1.811527] meson-drm d0100000.vpu: Queued 2 outputs on vpu
251[ 1.811827] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
252[ 1.818051] [drm] No driver support for vblank timestamp query.
253[ 1.824032] meson-drm d0100000.vpu: CVBS Output connector not available
254[ 1.840176] mmc1: new HS200 MMC card at address 0001
255[ 1.840898] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB
256[ 1.844285] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
257[ 1.850140] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
258[ 1.855928] mmcblk1rpmb: mmc1:0001 8GTF4R partition 3 512 KiB, chardev (245:0)
259[ 1.865379] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_ph)
260[ 1.873180] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
261[ 1.880928] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops)
262[ 1.888343] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
263[ 1.982387] random: fast init done
264[ 2.002231] meson-drm d0100000.vpu: [drm:drm_fbdev_client_hotplug] *ERROR* fbdev: Failed to setup generic )
265[ 2.008316] libphy: mdio_mux: probed
266[ 2.016606] libphy: mdio_mux: probed
267[ 2.016916] phy phy-d0078080.phy.2: unsupported PHY mode 5
268[ 2.022492] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
269[ 2.025832] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
270[ 2.033531] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
271[ 2.042758] xhci-hcd xhci-hcd.0.auto: irq 42, io mem 0xc9000000
272[ 2.048853] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
273[ 2.056780] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
274[ 2.063929] usb usb1: Product: xHCI Host Controller
275[ 2.068756] usb usb1: Manufacturer: Linux 5.5.0-0.6 xhci-hcd
276[ 2.074363] usb usb1: SerialNumber: xhci-hcd.0.auto
277[ 2.079680] hub 1-0:1.0: USB hub found
278[ 2.082930] hub 1-0:1.0: 2 ports detected
279[ 2.087152] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
280[ 2.092316] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
281[ 2.099902] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
282[ 2.106400] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
283[ 2.114459] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
284[ 2.122578] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
285[ 2.129735] usb usb2: Product: xHCI Host Controller
286[ 2.134566] usb usb2: Manufacturer: Linux 5.5.0-0.6 xhci-hcd
287[ 2.140172] usb usb2: SerialNumber: xhci-hcd.0.auto
288[ 2.145470] hub 2-0:1.0: USB hub found
289[ 2.148734] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
290[ 2.157090] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
291[ 2.188166] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
292domain-0 init dvfs: 4
293[ 2.200686] gx-sound-card sound: snd-soc-dummy-dai <-> c1105400.bus:audio-controller-0 mapping ok
294[ 2.204280] gx-sound-card sound: i2s-hifi <-> c1105400.bus:audio-controller-2 mapping ok
295[ 2.212798] printk: console [netcon0] enabled
296[ 2.216272] netconsole: network logging started
297[ 2.220739] hctosys: unable to open rtc device (rtc0)
298[ 2.226119] ALSA device list:
299[ 2.228759] #0: AMLGX
300[ 2.232520] Freeing unused kernel memory: 2624K
301[ 2.235743] Run /init as init process
302[ 2.241937] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
303[ 2.246747] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
304[ 2.252214] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
305[ 2.259356] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
306[ 2.265559] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
307[ 2.386395] mmc2: new high speed SDIO card at address 0001
308[ 2.421370] usb 1-1: new high-speed USB device number 2 using xhci-hcd
309[ 2.441674] usb 1-1: New USB device found, idVendor=1a40, idProduct=0801, bcdDevice= 1.00
310[ 2.444211] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
311[ 2.451328] usb 1-1: Product: USB 2.0 Hub
312[ 2.522694] hub 1-1:1.0: USB hub found
313[ 2.522792] hub 1-1:1.0: 4 ports detected
314[ 2.582669] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
315[ 2.809361] usb 1-1.4: new high-speed USB device number 3 using xhci-hcd
316[ 2.830345] usb 1-1.4: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00
317[ 2.833109] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
318[ 2.840387] usb 1-1.4: Product: Cruzer Blade
319[ 2.844591] usb 1-1.4: Manufacturer: SanDisk
320[ 2.848808] usb 1-1.4: SerialNumber: 4C530000170110114573
321[ 2.855863] usb-storage 1-1.4:1.0: USB Mass Storage device detected
322[ 2.860673] scsi host0: usb-storage 1-1.4:1.0
323[ 2.867828] usbcore: registered new interface driver uas
324[ 3.872267] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6
325[ 3.882309] sd 0:0:0:0: [sda] 30842880 512-byte logical blocks: (15.8 GB/14.7 GiB)
326[ 3.885123] sd 0:0:0:0: [sda] Write Protect is off
327[ 3.889327] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
328[ 3.920332] sda: sda1 sda2
329[ 3.927027] sd 0:0:0:0: [sda] Attached SCSI removable disk
330[ 7.119305] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: data=writeback
331[ 8.452165] systemd[1]: System time before build time, advancing clock.
332[ 8.566577] systemd[1]: systemd 243.162-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMO)
333[ 8.584078] systemd[1]: Detected architecture arm64.
334[ 8.647842] systemd[1]: Set hostname to <Manjaro>.
335[ 8.701170] systemd[1]: Couldn't move remaining userspace processes, ignoring: Input/output error
336[ 8.709184] random: crng init done
337[ 9.884776] systemd[1]: Configuration file /usr/lib/systemd/system/bluetooth-khadas.service is marked exec.
338[ 10.016812] systemd[1]: Configuration file /usr/lib/systemd/system/khadas-utils.service is marked executab.
339[ 10.043660] systemd[1]: Created slice system-getty.slice.
340[ 10.046338] systemd[1]: Created slice system-serial\x2dgetty.slice.
341[ 10.051909] systemd[1]: Created slice User and Session Slice.
342[ 10.056518] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
343[ 11.271237] audit: type=1130 audit(1574296154.816:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kern'
344[ 11.327989] systemd-journald[350]: Received client request to flush runtime journal.
345[ 11.487304] systemd-journald[350]: File /var/log/journal/3d23f747b9be4d9aa1221396b07d06b7/system.journal c.
346[ 13.774876] audit: type=1130 audit(1574296157.320:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kern'
347[ 13.882100] audit: type=1130 audit(1574296157.428:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kern'
348[ 14.521320] audit: type=1130 audit(1574296158.064:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kern'
349[ 14.941106] audit: type=1130 audit(1574296158.484:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kern'
350[ 17.407676] audit: type=1130 audit(1574296160.952:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kern'
351[ 17.457542] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
352[ 17.612320] audit: type=1130 audit(1574296161.156:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kern'
353[ 17.660194] audit: type=1127 audit(1574296161.204:9): pid=449 uid=0 auid=4294967295 ses=4294967295 subj=ke'
354[ 17.678372] audit: type=1130 audit(1574296161.224:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
355[ 18.623844] audit: type=1130 audit(1581193266.355:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
356[ 18.714434] audit: type=1130 audit(1581193266.447:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
357[ 18.736469] audit: type=1130 audit(1581193266.467:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
358[ 18.755483] audit: type=1130 audit(1581193266.487:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
359[ 23.667627] audit: type=1131 audit(1581193271.399:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
360[ 24.240144] audit: type=1130 audit(1581193271.971:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
361[ 24.539191] audit: type=1130 audit(1581193272.271:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
362[ 24.560682] audit: type=1130 audit(1581193272.291:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
363[ 24.604341] audit: type=1130 audit(1581193272.335:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
364[ 24.620253] audit: type=1130 audit(1581193272.351:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
365[ 24.639433] audit: type=1130 audit(1581193272.371:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
366[ 25.524106] audit: type=1130 audit(1581193273.255:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
367[ 26.247840] audit: type=1130 audit(1581193273.979:23): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
368
369Manjaro Linux 5.5.0-0.6 (ttyAML0)
370
371Manjaro login: [ 29.383979] meson8b-dwmac c9410000.ethernet eth0: PHY [0.e40908ff:08] driver [Meson GXL Int]
372[ 29.397493] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
373[ 29.399473] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
374[ 29.406270] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rmii link mode
375[ 29.470025] audit: type=1130 audit(1581193277.203:24): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
376[ 35.636754] broken atomic modeset userspace detected, disabling atomic
377[ 35.934918] audit: type=1701 audit(1581193283.667:25): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=ker1
378[ 36.574592] audit: type=1130 audit(1581193284.307:26): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
379[ 37.210181] audit: type=1131 audit(1581193284.939:27): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
380[ 37.572889] audit: type=1130 audit(1581193285.303:28): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
381[ 37.586120] audit: type=1131 audit(1581193285.303:29): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
382[ 37.604881] audit: type=1130 audit(1581193285.311:30): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
383[ 40.307197] broken atomic modeset userspace detected, disabling atomic
384[ 40.333429] audit: type=1701 audit(1581193288.067:31): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=ker1
385[ 40.374390] audit: type=1130 audit(1581193288.107:32): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
386[ 41.427834] audit: type=1131 audit(1581193289.159:33): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
387[ 42.151183] audit: type=1131 audit(1581193289.883:34): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
388[ 42.504696] audit: type=1130 audit(1581193290.235:35): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
389[ 42.517962] audit: type=1131 audit(1581193290.235:36): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
390[ 42.536745] audit: type=1130 audit(1581193290.247:37): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
391[ 42.974470] audit: type=1131 audit(1581193290.707:38): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
392[ 42.989843] audit: type=1131 audit(1581193290.715:39): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
393[ 43.107159] broken atomic modeset userspace detected, disabling atomic
394[ 43.127025] audit: type=1701 audit(1581193290.859:40): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=ker1
395[ 43.168233] audit: type=1130 audit(1581193290.899:41): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
396[ 43.815470] audit: type=1131 audit(1581193291.547:42): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=ker'
397[ 44.761534] broken atomic modeset userspace detected, disabling atomic
398[ 46.337786] broken atomic modeset userspace detected, disabling atom