· 6 years ago · Oct 08, 2019, 08:24 AM
1root@OpenWrt:/tmp# cat /etc/config/wireless
2config wifi-device wifi0
3 option type qcawificfg80211
4 option channel auto
5 option macaddr 00:03:7f:12:a6:93
6 option hwmode 11axa
7 # REMOVE THIS LINE TO ENABLE WIFI:
8 option disabled 1
9
10config wifi-iface
11 option device wifi0
12 option network lan
13 option mode ap
14 option ssid OpenWrt
15 option encryption none
16
17config wifi-device wifi1
18 option type qcawificfg80211
19 option channel auto
20 option macaddr 00:03:7f:12:3a:77
21 option hwmode 11axg
22 # REMOVE THIS LINE TO ENABLE WIFI:
23 option disabled 1
24
25config wifi-iface
26 option device wifi1
27 option network lan
28 option mode ap
29 option ssid Frank_test
30 option encryption none
31
32root@OpenWrt:/tmp# sysupgrade -v emmc-ipq807x-single.img
33Warning: optional section "sb11" missing from "emmc-ipq807x-single.img". Continue...
34Warning: optional section "sbl2" missing from "emmc-ipq807x-single.img". Continue...
35Warning: optional section "lkboot" missing from "emmc-ipq807x-single.img". Continue...
36Warning: optional section "ddr-ap-hk01-c1" missing from "emmc-ipq807x-single.img". Continue...
37Warning: optional section "ssd" missing from "emmc-ipq807x-single.img". Continue...
38Warning: section "bootconfig" will be ignored from "emmc-ipq807x-single.img". Continue...
39stat: No such file or directory
40Saving config files...
41etc/config/acd
42etc/config/cnss_diag
43etc/config/ddns
44etc/config/dhcp
45etc/config/dhcrelay
46etc/config/dropbear
47etc/config/ecm
48etc/config/firewall
49etc/config/hyd
50etc/config/ipsec
51etc/config/lbd
52etc/config/lldpd
53etc/config/luci
54etc/config/macsec
55etc/config/mcproxy
56etc/config/mcsd
57etc/config/multiwan
58etc/config/network
59etc/config/nss
60etc/config/openvpn
61etc/config/openvpn_recipes
62etc/config/pppoe
63etc/config/qcacfg80211
64etc/config/repacd
65etc/config/ripd
66etc/config/rpcd
67etc/config/rstp
68etc/config/skb_recycler
69etc/config/ssid-steering
70etc/config/sysstat
71etc/config/system
72etc/config/thermal
73etc/config/ubootenv
74etc/config/ucitrack
75etc/config/uhttpd
76etc/config/upnpd
77etc/config/wireless
78etc/config/wsplcd
79etc/default/pppoe-server
80etc/dnsmasq.conf
81etc/dropbear/dropbear_rsa_host_key
82etc/e2fsck.conf
83etc/easy-rsa/keys/index.txt
84etc/easy-rsa/keys/serial
85etc/easy-rsa/vars
86etc/firewall.user
87etc/fw_env.config
88etc/group
89etc/hosts
90etc/inittab
91etc/iproute2/rt_tables
92etc/ipsec.conf
93etc/ipsec.d/examples/hub-spoke.conf
94etc/ipsec.d/examples/ipv6.conf
95etc/ipsec.d/examples/l2tp-cert.conf
96etc/ipsec.d/examples/l2tp-psk.conf
97etc/ipsec.d/examples/linux-linux.conf
98etc/ipsec.d/examples/mast-l2tp-psk.conf
99etc/ipsec.d/examples/oe-exclude-dns.conf
100etc/ipsec.d/examples/sysctl.conf
101etc/ipsec.d/examples/xauth.conf
102etc/ipsec.d/policies/block
103etc/ipsec.d/policies/clear
104etc/ipsec.d/policies/clear-or-private
105etc/ipsec.d/policies/private
106etc/ipsec.d/policies/private-or-clear
107etc/ipsec.secrets
108etc/mcproxy.conf
109etc/opkg.conf
110etc/opkg/customfeeds.conf
111etc/opkg/keys/53bad1233d4c98c5
112etc/opkg/keys/db4c9820b83c52e7
113etc/opkg/keys/de98a2dd1d0f8a07
114etc/passwd
115etc/ppp/chap-secrets
116etc/ppp/filter
117etc/ppp/options
118etc/ppp/options.xl2tpd
119etc/ppp/pppoe-server-options
120etc/profile
121etc/protocols
122etc/quagga/ripd.conf
123etc/quagga/zebra.conf
124etc/rc.local
125etc/services
126etc/shadow
127etc/shells
128etc/ssl/openssl.cnf
129etc/sysctl.conf
130etc/sysstat/sysstat
131etc/sysstat/sysstat.ioconf
132etc/sysupgrade.conf
133etc/xl2tpd/xl2tp-secrets
134etc/xl2tpd/xl2tpd.conf
135Watchdog handover: fd=3
136- watchdog -
137Qualcomm Technologies, Inc. IPQ807x/AP-HK01-C1
138Warning: optional section "sb11" missing from "emmc-ipq807x-single.img". Continue...
139Warning: optional section "sbl2" missing from "emmc-ipq807x-single.img". Continue...
140Warning: optional section "lkboot" missing from "emmc-ipq807x-single.img". Continue...
141Warning: optional section "ddr-ap-hk01-c1" missing from "emmc-ipq807x-single.img". Continue...
142Warning: optional section "ssd" missing from "emmc-ipq807x-single.img". Continue...
143Warning: section "bootconfig" will be ignored from "emmc-ipq807x-single.img". Continue...
144stat: No such file or directory
145Saving config files...
146Command failed: Not found
147Command failed: Not found
148Sending TERM to remaining processes ... cnssdaemon [ 204.097162] /bin/shlogd rpcd hostapd wpa_supplicant
149[ 204.100354] 3788 (sysupgrade) R 1 1 1 0 -1 4194304 294 30198 0 0 3 0 7 5 20 0 1 0 20299 1458176 279 4294967295 1420894208 1421334848 2126515840 2126506260 1995717496 0 0 4100 2 0 0 0 17 3 0 0 0 0 0 1421402352 1421406529 1435471872 2126516082 2126516136 2126516136 2126516203 0
150[ 204.105265] ERROR: Signal[15] delivered to cnssdaemon[1289] by 3788
151netifd pppoe-server telnetd uhttpd ubusd ash dnsmasq acfg_tool xl2tpd ntpd thermald mcsd dropbear zebra watchquagga[3230]: zebra state -> down : read returned EOF
152watchquagga watchquagga[3230]: Terminating on signal
153rngd sysupgrade Terminated
154root@OpenWrt:/tmp# ubus
155Sending KILL to remaining processes ... ash rngd
156Switching to ramdisk...
157[ 208.304150] EXT4-fs (mmcblk0p24): re-mounted. Opts: data=ordered
158Performing system upgrade...
159Section script ignored
160Section gpt-e515ec4d956fe06c605e675ac10c9e4f3ba6daeb ignored
161dd: writing '/dev/mmcblk0p1': No space left on device
1621025+0 records in
1631024+0 records out
164524288 bytes (512.0KB) copied, 0.016518 seconds, 30.3MB/s
165430+0 records in
166430+0 records out
167220160 bytes (215.0KB) copied, 0.010717 seconds, 19.6MB/s
168Flashed sbl1-d97962e3d046924f283ccfdc3c0c801846801a5c
169Section bootconfig-f1050e638265203cd2a74f220c37aeaa88edfc7e ignored
170Section bootconfig1-f1050e638265203cd2a74f220c37aeaa88edfc7e ignored
171dd: writing '/dev/mmcblk0p5': No space left on device
1723073+0 records in
1733072+0 records out
1741572864 bytes (1.5MB) copied, 0.040773 seconds, 36.8MB/s
1752710+0 records in
1762710+0 records out
1771387520 bytes (1.3MB) copied, 0.063995 seconds, 20.7MB/s
178Flashed tz-7fb7fc3700e39853414a46c5956c80067bd3af08
179dd: writing '/dev/mmcblk0p7': No space left on device
180513+0 records in
181512+0 records out
182262144 bytes (256.0KB) copied, 0.007222 seconds, 34.6MB/s
18366+0 records in
18466+0 records out
18533792 bytes (33.0KB) copied, 0.002186 seconds, 14.7MB/s
186Flashed devcfg-6b7479a141ff6e98f3a688383da353b19493bb6a
187dd: writing '/dev/mmcblk0p11': No space left on device
188513+0 records in
189512+0 records out
190262144 bytes (256.0KB) copied, 0.007368 seconds, 33.9MB/s
191223+0 records in
192223+0 records out
193114176 bytes (111.5KB) copied, 0.006102 seconds, 17.8MB/s
194Flashed rpm-74a70576db432ff372e2a04708088a33347aa910
195dd: writing '/dev/mmcblk0p13': No space left on device
196513+0 records in
197512+0 records out
198262144 bytes (256.0KB) copied, 0.007560 seconds, 33.1MB/s
1992+0 records in
2002+0 records out
2011024 bytes (1.0KB) copied, 0.000404 seconds, 2.4MB/s
202Flashed ddr-AP-HK01-C1_256M32_DDR3-77f3b2b8949bc9fbe075b4f55aa1d12e5bd9a7e2
203Section ddr-AP-HK01-C2_256M32_DDR3-b8b640e6e7606f1c4fd7dcf8dff4513493d5eb53 ignored
204Section ddr-AP-HK01-C3_256M32_DDR3-e50e4527b9217587008215a279a650c7cdd40f03 ignored
205Section ddr-AP-HK01-C4_256M32_DDR3-bc30f810e445846d9cc2b6a13ceab494acbdac22 ignored
206Section ddr-DB-HK01_256M32_DDR3-8f820b66bc0373bd6b8f1c99481ecc9a5b47c499 ignored
207Section ddr-AP-HK02_512M32_DDR4-2a59c4545a108589bfa0061cd1b49500e4abe345 ignored
208Section ddr-DB-HK02_1024M32_DDR4-6da701138d11ed4f96e80f4cd3987d362e23aa93 ignored
209Section ddr-AP-HK05_256M32_DDR3-ee388616c93baa8406b6260aed9efa64831a8ef8 ignored
210Section ddr-AP-HK06_512M32_DDR4-3b2916b21dc46db52e1a226a9bda1c061b72a7ff ignored
211Section ddr-AP-HK07_256M16_DDR3-ae28394aeffd8290facf5b186ae36202253b9c42 ignored
212Section ddr-AP-HK08_512M32_DDR4-56084cee2b462c4eec991c1504544268c47c5b7d ignored
213Section ddr-AP-HK09_512M16_DDR4-43ce18dc0c2a45c785530d5bcf69215d2c788487 ignored
214Section ddr-AP-HK10_256M16_DDR3-74d9eae03bf2732650f614e547aeaef80fc3bd3e ignored
215Section ddr-AP-AC01_512M16_DDR4-4379e335187cb10cd17ba5440b73d2f2b1c8ada1 ignored
216Section ddr-AP-AC02_512M16_DDR4-883302293fefb961828ba40a0a02ef62e533d90b ignored
217Section ddr-AP-AC03_256M16_4L_DDR3-4f218b0d775bde7e925cbecd6fe7069b53621988 ignored
218Section ddr-AP-AC04_256M16_4L_DDR3-5413ea006b1bf544cab978051371b588ede9aa1b ignored
219Section ddr-AP-OAK02_256M32_DDR3-cee7cb4298389f712144cf08c3a4ed3a68f3049e ignored
220Section ddr-AP-OAK03_256M32_DDR3-c55ad1b6747cd053ecc2640dab553c699acc8616 ignored
221dd: writing '/dev/mmcblk0p16': No space left on device
2221281+0 records in
2231280+0 records out
224655360 bytes (640.0KB) copied, 0.017082 seconds, 36.6MB/s
2251273+0 records in
2261273+0 records out
227651776 bytes (636.5KB) copied, 0.030931 seconds, 20.1MB/s
228Flashed u-boot-692f54371a1d641fc0315d12058673540f22beeb
229dd: writing '/dev/mmcblk0p19': No space left on device
23012289+0 records in
23112288+0 records out
2326291456 bytes (6.0MB) copied, 0.155820 seconds, 38.5MB/s
23310757+0 records in
23410757+0 records out
2355507584 bytes (5.3MB) copied, 0.264747 seconds, 19.8MB/s
236Flashed hlos-acf45c7e6181d9cd9f7512ebd447674cff24006e
237dd: writing '/dev/mmcblk0p22': No space left on device
238122881+0 records in
239122880+0 records out
24062914560 bytes (60.0MB) copied, 1.863739 seconds, 32.2MB/s
24140452+0 records in
24240452+0 records out
24320711424 bytes (19.8MB) copied, 1.000935 seconds, 19.7MB/s
244Flashed rootfs-0f5b63191a6d5dbcefb378bc9e1b50b42735ab17
245dd: writing '/dev/mmcblk0p23': No space left on device
2468193+0 records in
2478192+0 records out
2484194304 bytes (4.0MB) copied, 0.105052 seconds, 38.1MB/s
2493668+0 records in
2503668+0 records out
2511878016 bytes (1.8MB) copied, 0.092990 seconds, 19.3MB/s
252Flashed wififw_v1-45b62ade000c18bfeeb23ae30e5a6811eac05e2f
253Section wififw_v2-48ba07456d22c65de1a9b0e3d35d80eade5724b4 ignored
254Section gptbackup-464472f5e73118fd16b284143144a850ca8630e9 ignored
255dd: writing '/dev/mmcblk0p2': No space left on device
256513+0 records in
257512+0 records out
258262144 bytes (256.0KB) copied, 0.008993 seconds, 27.8MB/s
2590+1 records in
2600+1 records out
261336 bytes (336B) copied, 0.000397 seconds, 826.5KB/s
262dd: writing '/dev/mmcblk0p3': No space left on device
263513+0 records in
264512+0 records out
265262144 bytes (256.0KB) copied, 0.009021 seconds, 27.7MB/s
2660+1 records in
2670+1 records out
268336 bytes (336B) copied, 0.000405 seconds, 810.2KB/s
269ash: yes: not found
270mke2fs 1.42.12 (29-Aug-2014)
271ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/mmcblk0p24 is mounted.
272Discarding device blocks: done
273Creating filesystem with 131072 1k blocks and 32768 inodes
274Filesystem UUID: 75355b96-0365-4e58-a5d8-67caff251ca0
275Superblock backups stored on blocks:
276 8193, 24577, 40961, 57345, 73729
277
278Allocating group tables: done
279Writing inode tables: done
280Creating journal (4096 blocks): done
281Writing superblocks and filesystem accounting information: done
282
283mount: mounting /dev/mmcblk0p24 on /tmp/overlay failed: No such file or directory
284cp: can't create '/tmp/overlay/': Is a directory
285umount: can't unmount /tmp/overlay: No such file or directory
286Upgrade completed
287Rebooting system...
288[ 223.501874] mdss_fb_release_all: try to close unopened fb 0!
289Format: Log Type - Time(microsec) - Message - Optional Info
290Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
291S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1-00147
292S - IMAGE_VARIANT_STRING=HAASANAZA
293S - OEM_IMAGE_VERSION_STRING=CRM
294S - Boot Config, 0x00000223
295B - 205 - PBL, Start
296B - 12053 - bootable_media_detect_entry, Start
297B - 56862 - bootable_media_detect_success, Start
298B - 56903 - elf_loader_entry, Start
299B - 69380 - auth_hash_seg_entry, Start
300B - 72207 - auth_hash_seg_exit, Start
301B - 222144 - elf_segs_hash_verify_entry, Start
302B - 824017 - PBL, End
303B - 1287557 - SBL1, Start
304B - 1391623 - GCC [RstStat:0x10, RstDbg:0x600000] WDog Stat : 0x4
305B - 1412821 - pm_device_init, Start
306B - 3277713 - PM_SET_VAL:Skip
307D - 1889780 - pm_device_init, Delta
308B - 3305620 - pm_driver_init, Start
309D - 65148 - pm_driver_init, Delta
310B - 3373178 - clock_init, Start
311D - 15799 - clock_init, Delta
312B - 3390319 - boot_flash_init, Start
313D - 24369 - boot_flash_init, Delta
314B - 3415420 - boot_config_data_table_init, Start
315D - 4239 - boot_config_data_table_init, Delta - (575 Bytes)
316B - 3422832 - Boot Setting : 0x00000618
317B - 3427041 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
318B - 3433598 - sbl1_ddr_set_params, Start
319B - 3438021 - CPR configuration: 0x30c
320B - 3441162 - cpr_init, Start
321B - 3443877 - Rail:0 Mode: 5 Voltage: 800000
322B - 3451288 - CL CPR settled at 760000mV
323B - 3452386 - Rail:1 Mode: 5 Voltage: 872000
324B - 3456016 - Rail:1 Mode: 7 Voltage: 936000
325D - 16897 - cpr_init, Delta
326B - 3462604 - Pre_DDR_clock_init, Start
327B - 3466660 - Pre_DDR_clock_init, End
328B - 3470107 - DDR Type : PCDDR3
329B - 3476329 - do ddr sanity test, Start
330D - 5246 - do ddr sanity test, Delta
331B - 3482429 - DDR: Start of HAL DDR Boot Training
332B - 3485204 - DDR: End of HAL DDR Boot Training
333B - 3491213 - DDR: Checksum to be stored on flash is 1606986936
334B - 3501918 - Image Load, Start
335D - 76830 - QSEE Image Loaded, Delta - (1373936 Bytes)
336B - 3579144 - Image Load, Start
337D - 1647 - SEC Image Loaded, Delta - (0 Bytes)
338B - 3588264 - Image Load, Start
339D - 7259 - DEVCFG Image Loaded, Delta - (26004 Bytes)
340B - 3595919 - Image Load, Start
341D - 15616 - RPM Image Loaded, Delta - (105964 Bytes)
342B - 3611871 - Image Load, Start
343D - 34587 - APPSBL Image Loaded, Delta - (578388 Bytes)
344B - 3646976 - QSEE Execution, Start
345D - 61 - QSEE Execution, Delta
346B - 3652649 - USB D+ check, Start
347D - 0 - USB D+ check, Delta
348B - 3659085 - SBL1, End
349D - 2373815 - SBL1, Delta
350S - Flash Throughput, 28783 KB/s (2085539 Bytes, 72457 us)
351S - DDR Frequency, 466 MHz
352S - Core 0 Frequency, 1651 MHz
353
354
355U-Boot 2016.01 (Sep 11 2019 - 14:59:51 +0800)
356
357DRAM: smem ram ptable found: ver: 1 len: 4
3581 GiB
359NAND: ONFI device found
360ID = 1590aa2c
361Vendor = 2c
362Device = aa
363qpic_nand: changing oobsize to 80 from 128 bytes
364SPI_ADDR_LEN=4
365SF: Detected W25Q256JW with page size 256 Bytes, erase size 4 KiB, total 32 MiB
366ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x2000000
367288 MiB
368MMC: <NULL>: 0 (eMMC)
369In: serial@78B3000
370Out: serial@78B3000
371Err: serial@78B3000
372machid: 8010000
373eth0 MAC Address from ART is not valid
374eth1 MAC Address from ART is not valid
375eth2 MAC Address from ART is not valid
376eth3 MAC Address from ART is not valid
377eth4 MAC Address from ART is not valid
378eth5 MAC Address from ART is not valid
379Hit any key to stop autoboot: 0
380
381MMC read: dev # 0, block # 28194, count 12288 ... 12288 blocks read: OK
382## Loading kernel from FIT Image at 44000000 ...
383 Using 'config@hk01' configuration
384 Trying 'kernel@1' kernel subimage
385 Description: ARM OpenWrt Linux-4.4.60
386 Type: Kernel Image
387 Compression: gzip compressed
388 Data Start: 0x440000e4
389 Data Size: 3942714 Bytes = 3.8 MiB
390 Architecture: ARM
391 OS: Linux
392 Load Address: 0x41208000
393 Entry Point: 0x41208000
394 Hash algo: crc32
395 Hash value: 1d45dcc1
396 Hash algo: sha1
397 Hash value: 3e16847d10a7c0525bf1865273a5974b0f081d09
398 Verifying Hash Integrity ... crc32+ sha1+ OK
399## Loading fdt from FIT Image at 44000000 ...
400 Using 'config@hk01' configuration
401 Trying 'fdt@hk01' fdt subimage
402 Description: ARM OpenWrt qcom-ipq807x-hkxx device tree blob
403 Type: Flat Device Tree
404 Compression: uncompressed
405 Data Start: 0x444c5f20
406 Data Size: 86084 Bytes = 84.1 KiB
407 Architecture: ARM
408 Hash algo: crc32
409 Hash value: 26599084
410 Hash algo: sha1
411 Hash value: db6300c7276404075379c39e71228ee9492a151a
412 Verifying Hash Integrity ... crc32+ sha1+ OK
413 Booting using the fdt blob at 0x444c5f20
414 Uncompressing Kernel Image ... OK
415 Loading Device Tree to 4a3e7000, end 4a3ff043 ... OK
416Using machid 0x8010000 from environment
417
418Starting kernel ...
419
420[ 0.000000] Booting Linux on physical CPU 0x0
421[ 0.000000] Initializing cgroup subsys cpuset
422[ 0.000000] Initializing cgroup subsys cpu
423[ 0.000000] Initializing cgroup subsys cpuacct
424[ 0.000000] Linux version 4.4.60 (root@frank-Ubuntu-pc) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 1c2406e+r49254) ) #1 SMP PREEMPT Wed Sep 11 16:29:17 CST 2019
425[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c0383d
426[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
427[ 0.000000] Machine model: Qualcomm Technologies, Inc. IPQ807x/AP-HK01-C1
428[ 0.000000] Ignoring memory range 0x40000000 - 0x41000000
429[ 0.000000] Reserved memory: OVERLAP DETECTED!
430[ 0.000000] wifi_dump@51000000 (0x51000000--0x51600000) overlaps with wigig_dump@51200000 (0x51200000--0x51600000)
431[ 0.000000] Memory policy: Data cache writealloc
432[ 0.000000] psci: probing for conduit method from DT.
433[ 0.000000] psci: PSCIv1.0 detected in firmware.
434[ 0.000000] psci: Using standard PSCI v0.2 function IDs
435[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
436[ 0.000000] PERCPU: Embedded 11 pages/cpu @be6b1000 s15168 r8192 d21696 u45056
437[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 226596
438[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 root=PARTUUID=0db817f7-16e4-8a21-e044-205a5b78049e gpt rootwait swiotlb=1
439[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
440[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
441[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
442[ 0.000000] Memory: 897776K/915456K available (5434K kernel code, 372K rwdata, 1892K rodata, 224K init, 339K bss, 17680K reserved, 0K cma-reserved, 0K highmem)
443[ 0.000000] Virtual kernel memory layout:
444[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
445[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
446[ 0.000000] vmalloc : 0xbf800000 - 0xff800000 (1024 MB)
447[ 0.000000] lowmem : 0x80000000 - 0xbf000000 (1008 MB)
448[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
449[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
450[ 0.000000] .text : 0x80208000 - 0x8092fd24 (7328 kB)
451[ 0.000000] .init : 0x80930000 - 0x80968000 ( 224 kB)
452[ 0.000000] .data : 0x80968000 - 0x809c51c0 ( 373 kB)
453[ 0.000000] .bss : 0x809c8000 - 0x80a1cf74 ( 340 kB)
454[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
455[ 0.000000] Preemptible hierarchical RCU implementation.
456[ 0.000000] Build-time adjustment of leaf fanout to 32.
457[ 0.000000] NR_IRQS:16 nr_irqs:16 16
458[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
459[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
460[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
461[ 0.000016] Switching to timer-based delay loop, resolution 52ns
462[ 0.000737] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
463[ 0.000749] pid_max: default: 32768 minimum: 301
464[ 0.000839] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
465[ 0.000849] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
466[ 0.001369] Initializing cgroup subsys io
467[ 0.001384] Initializing cgroup subsys memory
468[ 0.001407] Initializing cgroup subsys devices
469[ 0.001417] Initializing cgroup subsys freezer
470[ 0.001427] Initializing cgroup subsys net_cls
471[ 0.001437] Initializing cgroup subsys pids
472[ 0.001459] CPU: Testing write buffer coherency: ok
473[ 0.001852] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
474[ 0.001896] Setting up static identity map for 0x41208280 - 0x412082d8
475[ 0.052758] MSM Memory Dump base table set up
476[ 0.052782] MSM Memory Dump apps data table set up
477[ 0.090186] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
478[ 0.120171] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
479[ 0.150205] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
480[ 0.150258] Brought up 4 CPUs
481[ 0.150278] SMP: Total of 4 processors activated (153.60 BogoMIPS).
482[ 0.150284] CPU: All CPU(s) started in SVC mode.
483[ 0.172529] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
484[ 0.172842] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
485[ 0.172865] futex hash table entries: 1024 (order: 4, 65536 bytes)
486[ 0.173219] pinctrl core: initialized pinctrl subsystem
487[ 0.174293] NET: Registered protocol family 16
488[ 0.175319] DMA: preallocated 2048 KiB pool for atomic coherent allocations
489[ 0.200033] cpuidle: using governor ladder
490[ 0.230051] cpuidle: using governor menu
491[ 0.239818] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
492[ 0.242346] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
493[ 0.261443] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
494[ 0.261454] hw-breakpoint: maximum watchpoint size is 8 bytes.
495[ 0.263046] CPU: IPQ8074, SoC Version: 1.1
496[ 0.263353] <CORE> glink_init: IPC Logging Disabled
497[ 0.263684] <CORE> glink_core_register_transport: IPC Logging disabled
498[ 0.263750] msm_glink_smem_native_xprt rx fifo not found
499[ 0.264157] msm_rpm_dev_probe: APSS-RPM communication over GLINK
500[ 0.264625] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2
501[ 0.264974] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
502[ 0.266237] IPC logging disabled
503[ 0.266243] IPC logging disabled
504[ 0.266248] IPC logging disabled
505[ 0.266252] IPC logging disabled
506[ 0.266257] IPC logging disabled
507[ 0.266500] sps:sps is ready.
508[ 0.302039] pps_core: LinuxPPS API ver. 1 registered
509[ 0.302048] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
510[ 0.302072] PTP clock support registered
511[ 0.303855] Advanced Linux Sound Architecture Driver Initialized.
512[ 0.304579] clocksource: Switched to clocksource arch_sys_counter
513[ 0.308566] NET: Registered protocol family 2
514[ 0.309216] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
515[ 0.309301] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
516[ 0.309442] TCP: Hash tables configured (established 8192 bind 8192)
517[ 0.309492] UDP hash table entries: 512 (order: 2, 16384 bytes)
518[ 0.309528] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
519[ 0.309691] NET: Registered protocol family 1
520[ 0.310961] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
521[ 0.319179] squashfs: version 4.0 (2009/01/31) Phillip Lougher
522[ 0.319195] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
523[ 0.323009] Key type asymmetric registered
524[ 0.323024] Asymmetric key parser 'x509' registered
525[ 0.323061] io scheduler noop registered
526[ 0.323074] io scheduler deadline registered (default)
527[ 0.326067] 20000000.pci supply vdda not found, using dummy regulator
528[ 0.326130] 20000000.pci supply vdda_phy not found, using dummy regulator
529[ 0.326165] 20000000.pci supply vdda_refclk not found, using dummy regulator
530[ 0.326690] PCI host bridge /soc/pci@20000000 ranges:
531[ 0.326716] IO 0x20200000..0x202fffff -> 0x20200000
532[ 0.326730] MEM 0x20300000..0x20ffffff -> 0x20300000
533[ 1.361802] qcom-pcie 20000000.pci: phy link never came up
534[ 1.363345] qcom-pcie 20000000.pci: hostinit failed
535[ 1.363354] qcom-pcie 20000000.pci: cannot initialize host
536[ 1.363490] qcom-pcie: probe of 20000000.pci failed with error -110
537[ 1.363654] 10000000.pci supply vdda not found, using dummy regulator
538[ 1.363694] 10000000.pci supply vdda_phy not found, using dummy regulator
539[ 1.363728] 10000000.pci supply vdda_refclk not found, using dummy regulator
540[ 1.364229] PCI host bridge /soc/pci@10000000 ranges:
541[ 1.364249] IO 0x10200000..0x102fffff -> 0x10200000
542[ 1.364262] MEM 0x10300000..0x10ffffff -> 0x10300000
543[ 2.399327] qcom-pcie 10000000.pci: phy link never came up
544[ 2.400869] qcom-pcie 10000000.pci: hostinit failed
545[ 2.400878] qcom-pcie 10000000.pci: cannot initialize host
546[ 2.400991] qcom-pcie: probe of 10000000.pci failed with error -110
547[ 2.401425] MDSS QPIC HW Base phy_Address=0x7980000 virt=bfb40000
548[ 2.401880] mdss_qpic_panel_probe: Panel Name = qpic lcd panel
549[ 2.403717] mdss_fb_register: FrameBuffer[0] 800x480 registered successfully!
550[ 2.409846] NET: Registered protocol family 27
551[ 2.409857] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
552[ 2.409874] qmi_log_init: IPC Logging disabled
553[ 2.409880] qmi_log_init: IPC Logging disabled
554[ 2.409972] msm_rpm_log_probe: OK
555[ 2.410693] msm-dcc b3000.dcc: DCC XPU is not specified
556[ 2.410931] msm-dcc b3000.dcc: DCC SRAM dump setup failed
557[ 2.410955] msm-dcc b3000.dcc: jiffies_64: 0xffff8bc0, cntvct_64: 0xa58d416
558[ 2.410966] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0xbfb3e004)
559[ 2.410977] msm-dcc b3000.dcc: gcnt_lo: 0x0a58d5cf(0xbfb3e000)
560[ 2.411680] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
561[ 2.412560] msm_serial 78b3000.serial: msm_serial: detected port #0
562[ 2.412598] msm_serial 78b3000.serial: uartclk = 3686400
563[ 2.412632] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 22, base_baud = 230400) is a MSM
564[ 2.412652] msm_serial: console setup on port #0
565[ 3.255787] console [ttyMSM0] enabled
566[ 3.260796] msm_serial 78b1000.serial: msm_serial: detected port #1
567[ 3.264040] msm_serial 78b1000.serial: uartclk = 19200000
568[ 3.270126] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 23, base_baud = 1200000) is a MSM
569[ 3.276073] msm_serial: driver initialized
570[ 3.284542] msm_serial_hsl_init: driver initialized
571[ 3.298153] brd: module loaded
572[ 3.298850] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
573[ 3.301919] m25p80 spi32766.0: found w25q256jw, expected n25q128a11
574[ 3.307402] m25p80 spi32766.0: w25q256jw (32768 Kbytes)
575[ 3.315364] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xaa
576[ 3.318501] nand: Micron MT29F2G08ABBGAH4
577[ 3.325126] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
578[ 3.330340] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
579[ 3.339425] libphy: Fixed MDIO Bus: probed
580[ 3.562655] qca-mdio 90000.mdio: Could not find phy-reset-gpio
581[ 3.562771] libphy: qca_mdio: probed
582[ 3.569197] qca-mdio 90000.mdio: qca-mdio driver was registered
583[ 3.571346] Unable to create IPC log context!
584[ 3.577097] cnss: Platform driver probed successfully.
585[ 3.581615] cnss_genl: genl_register_family fail: -17
586[ 3.586329] cnss: CNSS genl init failed -17
587[ 3.591411] cnss: Platform driver probed successfully.
588[ 3.595512] Skip QCA8074V2 in V1 platform
589[ 3.600850] i2c /dev entries driver
590[ 3.612111] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
591[ 3.612586] sdhci: Secure Digital Host Controller Interface driver
592[ 3.619679] sdhci: Copyright(c) Pierre Ossman
593[ 3.625632] sdhci-pltfm: SDHCI platform and OF driver helper
594[ 3.630456] qcom_ice_get_pdevice: invalid device list
595[ 3.635778] sdhci_msm 7824900.sdhci: sdhci_msm_ice_get_dev: ICE device not probed yet
596[ 3.640712] sdhci_msm 7824900.sdhci: sdhci_msm_probe: required ICE device not probed yet err = -517
597[ 3.648906] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
598[ 3.657454] sdhci_msm 7864900.sdhci: Got SD LDO GPIO #21
599[ 3.764716] sdhci_msm 7864900.sdhci: No vreg data found for vdd
600[ 3.764744] sdhci_msm 7864900.sdhci: No vreg data found for vdd-io
601[ 3.780308] pmd9655_ldo11: supplied by e-smps1-reg
602[ 3.780413] sdhci_msm 7864900.sdhci: No vmmc regulator found
603[ 3.824700] mmc0: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
604[ 3.826949] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
605[ 3.831552] ICE IRQ = 26
606[ 3.840338]
607[ 3.840338] Version Rollback Feature Disabled
608[ 3.843214] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x08b04000
609[ 3.848107] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x08b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x08b04000
610[ 3.863969] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x08b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x08b04000
611[ 3.878477] sps:BAM 0x08b04000 is registered.[ 3.885636] DEV CI test message
612[ 3.889817] remoteproc remoteproc0: q6v5-wcss is available
613[ 3.892745] subsys-restart: ssr_parse_restart_orders(): q6v5_m3 device has been added to q6v5-m3's restart group
614[ 3.897861] subsys-restart: ssr_parse_restart_orders(): q6v5_wcss device has been added to q6v5-m3's restart group
615[ 3.908263] remoteproc remoteproc1: q6v5-m3 is available
616[ 3.918791] SPMI VADC - Min ch: 0 Max ch: 15
617[ 3.925656] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000
618[ 3.928127] coresight-csr 6001000.csr: CSR initialized
619[ 3.935624] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000
620[ 3.940553] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000
621[ 3.948093] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000
622[ 3.955466] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000
623[ 3.962831] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000
624[ 3.970225] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000
625[ 3.977614] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000
626[ 3.984984] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000
627[ 3.992350] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000
628[ 3.999743] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000
629[ 4.007130] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000
630[ 4.014485] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000
631[ 4.021888] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000
632[ 4.030338] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000
633[ 4.036648] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000
634[ 4.044012] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000
635[ 4.051429] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000
636[ 4.058922] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000
637[ 4.066301] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000
638[ 4.073696] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000
639[ 4.081121] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000
640[ 4.088525] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x06044000
641[ 4.095497] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x06044000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x06044000
642[ 4.111206] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x06044000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x06044000
643[ 4.125721] sps:BAM 0x06044000 is registered.[ 4.132641] coresight-tmc 6028000.tmc: TMC initialized
644[ 4.136823] coresight-tmc 6027000.tmc: TMC initialized
645[ 4.141930] coresight-funnel 6021000.funnel: FUNNEL initialized
646[ 4.146966] coresight-funnel 6100000.funnel: FUNNEL initialized
647[ 4.152760] coresight-funnel 6120000.funnel: FUNNEL initialized
648[ 4.158692] coresight-funnel 61a1000.funnel: FUNNEL initialized
649[ 4.165356] coresight-etm4x 619c000.etm: ETM 4.0 initialized
650[ 4.170931] coresight-etm4x 619d000.etm: ETM 4.0 initialized
651[ 4.176895] coresight-etm4x 619e000.etm: ETM 4.0 initialized
652[ 4.182542] coresight-etm4x 619f000.etm: ETM 4.0 initialized
653[ 4.187697] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized
654[ 4.193435] coresight-stm 6002000.stm: STM initialized
655[ 4.202193] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000
656[ 4.205856] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
657[ 4.215316] ipq_audio soc:sound@0: ASoC: CPU DAI qca-i2s-dai not registered
658[ 4.221002] ipq_audio soc:sound@0: snd_soc_register_card() failed:-517
659[ 4.230403] qca_codec 0-0012: i2c regmap done
660[ 4.236681] NET: Registered protocol family 10
661[ 4.239460] NET: Registered protocol family 17
662[ 4.243083] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
663[ 4.247545] Bridge firewalling registered
664[ 4.260249] 8021q: 802.1Q VLAN Support v1.8
665[ 4.264252] Registering SWP/SWPB emulation handler
666[ 4.269314] qcom,cpr3-npu-regulator a4000.npu-cpr: NPU CPR valid fuse count: 2
667[ 4.273152] pmd9655_s4: supplied by e-smps1-reg
668[ 4.280396] cpr3_mem_acc_init: npu: not using memory accelerator regulator
669[ 4.284667] npu_corner: fused NOM: open-loop= 832000 uV
670[ 4.291570] npu_corner: fused TURBO: open-loop= 888000 uV
671[ 4.297763] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
672[ 4.303135] pmd9655_s3: supplied by e-smps1-reg
673[ 4.310202] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
674[ 4.314593] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 3
675[ 4.321176] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
676[ 4.328852] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
677[ 4.336359] cpr3_mem_acc_init: apc: not using memory accelerator regulator
678[ 4.345500] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV
679[ 4.352430] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 840000 uV
680[ 4.362425] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 912000 uV
681[ 4.372234] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 992000 uV
682[ 4.382105] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 624, quot_offset[ 7]= 0
683[ 4.391855] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 881, quot_offset[ 7]= 255
684[ 4.402706] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1004, quot_offset[ 7]= 120
685[ 4.413643] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1147, quot_offset[ 7]= 140
686[ 4.424700] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
687[ 4.436589] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 800000 KHz
688[ 4.442418] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1017600 KHz
689[ 4.449928] qcom_ice_get_pdevice: found ice device bd7dce40
690[ 4.458082] qcom_ice_get_pdevice: matching platform device be1d8e00
691[ 4.463471] sdhci_msm 7824900.sdhci: No vreg data found for vdd
692[ 4.469710] sdhci_msm 7824900.sdhci: No vreg data found for vdd-io
693[ 4.475760] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xc03ac000
694[ 4.482893] sdhci_msm 7824900.sdhci: No vmmc regulator found
695[ 4.489062] sdhci_msm 7824900.sdhci: No vqmmc regulator found
696[ 4.534581] mmc1: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
697[ 4.539537] ipq_audio soc:sound@0: qca-i2s-codec-dai <-> qca-i2s-dai mapping ok
698[ 4.541976] ipq_audio soc:sound@0: qca-tdm-codec-dai <-> qca-tdm-dai mapping ok
699[ 4.576701] hctosys: unable to open rtc device (rtc0)
700[ 4.581762] ALSA device list:
701[ 4.581780] #0: ipq8074_snd_card
702[ 4.583953] Waiting for root device PARTUUID=0db817f7-16e4-8a21-e044-205a5b78049e...
703[ 4.617672] mmc1: MAN_BKOPS_EN bit is not set
704[ 4.618557] mmc1: Enhanced Strobe Initialization Done
705[ 4.621775] mmc1: new HS400 MMC card at address 0001
706[ 4.626315] mmcblk0: mmc1:0001 008G30 7.28 GiB
707[ 4.641148] mmcblk0rpmb: mmc1:0001 008G30 partition 3 4.00 MiB
708[ 4.642786] GPT:Primary header thinks Alt. header is not at the end of the disk.
709[ 4.645870] GPT:7634943 != 15269887
710[ 4.653404] GPT:Alternate GPT header not at the end of the disk.
711[ 4.656627] GPT:7634943 != 15269887
712[ 4.662866] GPT: Use GNU Parted to correct GPT errors.
713[ 4.666115] GPT: device [179:20] (rootfs) set to be root filesystem
714[ 4.671300] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
715[ 4.696756] VFS: Mounted root (squashfs filesystem) readonly on device 179:22.
716[ 4.696908] Freeing unused kernel memory: 224K (80930000 - 80968000)
717[ 4.839335] init: Console is alive
718[ 4.839412] init: - watchdog -
719[ 5.472756] usbcore: registered new interface driver usbfs
720[ 5.472801] usbcore: registered new interface driver hub
721[ 5.477225] usbcore: registered new device driver usb
722[ 5.483596] Button Hotplug driver version 0.4.1
723[ 5.492095] SCSI subsystem initialized
724[ 5.498815] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
725[ 5.499112] ehci-platform: EHCI generic platform driver
726[ 5.511008] msm-usb-ssphy-qmp 78000.ssphy: Initializing QMP phy
727[ 5.518268] msm-usb-ssphy-qmp 78000.ssphy: QMP PHY initialization timeout
728[ 5.518289] msm-usb-ssphy-qmp 78000.ssphy: USB3_PHY_PCS_STATUS:68686868
729[ 5.725067] msm-usb-ssphy-qmp 58000.ssphy: Initializing QMP phy
730[ 5.733125] msm-usb-ssphy-qmp 58000.ssphy: QMP PHY initialization timeout
731[ 5.733146] msm-usb-ssphy-qmp 58000.ssphy: USB3_PHY_PCS_STATUS:68686868
732[ 5.942716] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
733[ 5.942750] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
734[ 5.947274] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
735[ 5.954676] xhci-hcd xhci-hcd.0.auto: irq 229, io mem 0x08a00000
736[ 5.963627] hub 1-0:1.0: USB hub found
737[ 5.969584] hub 1-0:1.0: 1 port detected
738[ 5.973265] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
739[ 5.977235] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
740[ 5.982529] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
741[ 5.990291] hub 2-0:1.0: USB hub found
742[ 5.998398] hub 2-0:1.0: 1 port detected
743[ 6.002097] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
744[ 6.006039] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
745[ 6.011439] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
746[ 6.018901] xhci-hcd xhci-hcd.1.auto: irq 230, io mem 0x08c00000
747[ 6.027789] hub 3-0:1.0: USB hub found
748[ 6.033808] hub 3-0:1.0: 1 port detected
749[ 6.037485] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
750[ 6.041446] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
751[ 6.046771] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
752[ 6.054512] hub 4-0:1.0: USB hub found
753[ 6.062633] hub 4-0:1.0: 1 port detected
754[ 6.069334] usbcore: registered new interface driver usb-storage
755[ 6.070674] usbcore: registered new interface driver uas
756[ 6.842028] init: - preinit -
757Press the [f] key and hit [enter] to enter failsafe mode
758Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
759Before mount_root
760[ 8.979080] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: (null)
761[ 8.979613] mount_root: overlay filesystem has not been fully initialized yet
762[ 8.986279] mount_root: switching to jffs2 overlay
763After mount_root
764131072+0 records in
765131072+0 records out
766131072 bytes (128.0KB) copied, 0.244625 seconds, 523.2KB/s
767ln[ 9.284984] procd: - early -
768[ 9.289233] procd: - watchdog -
769: /lib/firmware/IPQ8074/caldata.bin: No such file or directory
770[ 9.884233] procd: - ubus -
771[ 10.886112] random: ubusd: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
772[ 10.886214] random: ubusd: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
773[ 10.893968] random: ubusd: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
774[ 10.904147] random: ubusd: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
775[ 10.911680] random: ubusd: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
776[ 10.920554] random: ubusd: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
777[ 10.929407] random: ubusd: uninitialized urandom read (4 bytes read, 7 bits of entropy available)
778[ 10.938304] procd: - init -
779Please press Enter to activate this console.
780 WIFI FW mount is successful
781/usr/bin/iotd[746]: Started iot daemon
782[ 11.923795] cfg80211: World regulatory domain updated:
783[ 11.923820] cfg80211: DFS Master region: unset
784[ 11.927878] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
785[ 11.932428] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
786[ 11.936798] ntfs: driver 2.1.32 [Flags: R/O MODULE].
787[ 11.939555] Initializing XFRM netlink socket
788[ 11.940003] NET: Registered protocol family 15
789[ 11.959350] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
790[ 11.963503] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
791[ 11.972832] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
792[ 11.980827] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
793[ 11.990525] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
794[ 11.999972] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
795[ 12.008045] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
796[ 13.019390] ssdk_switch_device_num_init[998]:INFO:ess-switch dts node number: 1
797[ 13.023084] ssdk_dt_get_switch_node[836]:INFO:ess-switch DT exist!
798[ 13.030004] ssdk_dt_parse_access_mode[737]:INFO:switch_access_mode: local bus
799[ 13.036169] ssdk_dt_parse_access_mode[750]:INFO:switchreg_base_addr: 0x3a000000
800[ 13.043281] ssdk_dt_parse_access_mode[751]:INFO:switchreg_size: 0x1000000
801[ 13.050573] ssdk_dt_parse_mac_mode[242]:INFO:mac mode = 0x0
802[ 13.056999] ssdk_dt_parse_mac_mode[251]:INFO:mac mode1 = 0xff
803[ 13.062551] ssdk_dt_parse_mac_mode[260]:INFO:mac mode2 = 0xd
804[ 13.068285] ssdk_dt_parse_phy_info[515]:INFO:qcom,port_phyinfo DT doesn't exist!
805[ 13.073929] ssdk_dt_parse_mdio[605]:INFO:mdio DT exist!
806[ 13.080967] ssdk_dt_parse_uniphy[279]:INFO:ess-uniphy DT exist!
807[ 13.086585] ssdk_dt_parse_intf_mac[683]:INFO:dp1 MAC 00:03:7f:ba:db:ad
808[ 13.092499] ssdk_plat_init start
809[ 13.176312] ssdk_ppe_clock_init[464]:INFO:ppe and uniphy clock init successfully!
810[ 13.179500] ssdk_probe[1878]:INFO:ess_rst doesn't exist!
811[ 13.186654] HPPE initializing...
812[ 13.188088] malibu_phy_api_ops_init[2851]:INFO:qca probe malibu phy driver succeeded!
813[ 13.199063] aquantia_phy_api_ops_init[2180]:INFO:qca probe aquantia phy driver succeeded!
814[ 13.203799] regi_init[3395]:INFO:Initializing HPPE!!
815[ 13.424582] ssdk_ppe_reset_init[738]:INFO:ppe reset successfully!
816[ 13.430555] qca_hppe_tdm_hw_init[737]:INFO:tdm setup num=96
817[ 13.433906] qca_hppe_portctrl_hw_init[165]:INFO:Hawkeye PPE port initializing
818[ 15.304608] ssdk_switch_register[1617]:INFO:Chip version 0x1500
819[ 15.307585] qca_link_polling_select[1279]:INFO:link-polling-required node does not exist
820[ 15.313829] ssdk_switch_register[1642]:INFO:polling is selected
821[ 15.321552] regi_init[3399]:INFO:Initializing HPPE Done!!
822[ 15.326473] regi_init[3443]:INFO:qca-ssdk module init succeeded!
823[ 15.344598] tun: Universal TUN/TAP device driver, 1.6
824[ 15.344621] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
825[ 15.350859] EDMA ver 1 hw init
826[ 15.354926] EDMA HW Reset completed succesfully
827[ 15.357764] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
828[ 15.362160] RxDesc:1 (15-15) RxFill:1 (7-7)
829[ 15.368483] GMAC2(bd3f7d00) Invalid MAC@ - using 2e:56:df:ed:be:05
830[ 15.372288] GMAC3(bbeea500) Invalid MAC@ - using b2:d7:f7:48:60:9b
831[ 15.378561] GMAC4(bbeecd00) Invalid MAC@ - using 5a:77:43:b8:5f:9f
832[ 15.384828] GMAC5(bbeef500) Invalid MAC@ - using 2a:25:ba:04:eb:7c
833[ 15.390897] GMAC6(bb731d00) Invalid MAC@ - using f6:65:1e:bc:c3:8a
834[ 15.397105] **********************************************************
835[ 15.402444] * NSS Data Plane driver
836[ 15.409031] **********************************************************
837[ 15.420304] l2tp_core: L2TP core driver, V2.0
838[ 15.420788] l2tp_netlink: L2TP netlink interface
839[ 15.479518] qca-nss 39000000.nss: Direct firmware load for qca-nss0.bin failed with error -2
840[ 15.479550] qca-nss 39000000.nss: Falling back to user helper
841/lib/firmware/qca-nss0.bin 33
842[ 15.644383] nss_driver - fw of size 665756 bytes copied to load addr: 40000000, nss_id : 0
843[ 15.645561] Supported Frequencies -
844[ 15.651527] 748.8 MHz 1.4976 GHz
845[ 15.657510] 1.6896 GHz [ 15.658555]
846[ 15.660990] 7f63fec0: meminfo init succeed
847[ 15.677268] qca-nss 39400000.nss: Direct firmware load for qca-nss1.bin failed with error -2
848[ 15.677299] qca-nss 39400000.nss: Falling back to user helper
849[ 15.689878] node size 2 # items 4
850[ 15.690405] memory: 40000000 1073741824 (avl 941572096) items 4 active_cores 2
851[ 15.693729] 7f63fec0: nss core 0 booted successfully
852/lib/firmware/qca-nss1.bin 33
853[ 15.716208] nss_driver - fw of size 265180 bytes copied to load addr: 40800000, nss_id : 1
854[ 15.716858] Supported Frequencies -
855[ 15.723367] 748.8 MHz 1.4976 GHz
856[ 15.729345] 1.6896 GHz [ 15.730379]
857[ 15.732845] 7f644180: meminfo init succeed
858[ 15.735684] sit: IPv6 over IPv4 tunneling driver
859[ 15.738235] node size 2 # items 4
860[ 15.738238] memory: 40000000 1073741824 (avl 941875200) items 4 active_cores 2
861[ 15.738248] 7f644180: nss core 1 booted successfully
862[ 15.755547] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded.
863[ 15.760724] gre: GRE over IPv4 demultiplexor driver
864[ 15.766853] ip_gre: GRE over IPv4 tunneling driver
865[ 15.772253] ip6_gre: GRE over IPv6 tunneling driver
866[ 15.780619] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
867[ 15.784240] QCA multicast snooping installed successfully
868[ 15.788993] ip6_tables: (C) 2000-2006 Netfilter Core Team
869[ 15.798278] nf_conntrack version 0.5.0 (14031 buckets, 56124 max)
870[ 15.804342] QCA Hy-Fi multicast installation successfully
871[ 15.808953] PPP generic driver version 2.4.2
872[ 15.810495] nss_lag_init[354]:LAG Manager Installed
873[ 15.815222] NET: Registered protocol family 24
874[ 15.820130] PPTP driver version 0.8.5
875[ 15.824869] <NSS-CRYPTO>:module loaded Build_ID - 09/11/19, 15:30:25 SoC=ipq807x
876[ 15.832294] cannot find nss-macsec0 node
877[ 15.833730] cannot find nss-macsec1 node
878[ 15.837844] cannot find nss-macsec2 node
879[ 15.841542] nss_macsec init success
880[ 15.851981] diag: IPC Logging disabled
881[ 15.856124] u_qdss: module license 'unspecified' taints kernel.
882[ 15.856150] Disabling lock debugging due to kernel taint
883[ 15.875598] u32 classifier
884[ 15.875615] input device check on
885[ 15.877185] Actions configured
886[ 15.881749] Mirror/redirect action on
887[ 15.892647] fuse init (API version 7.23)
888[ 15.894385] arp_tables: (C) 2002 David S. Miller
889[ 15.897685] ip_tables: (C) 2000-2006 Netfilter Core Team
890[ 15.902996] l2tp_ppp: PPPoL2TP kernel driver, V2.0
891[ 16.038332] nf_conntrack_rtsp v0.6.21 loading
892[ 16.156629] nf_nat_rtsp v0.6.21 loading
893[ 16.158524] PPP MPPE Compression module registered
894[ 16.168451] xt_time: kernel timezone is -0000
895qcawifi configuration is disable
896[ 17.433164] Not a bridge device, or device not found: br-
897[ 19.377773] random: nonblocking pool is initialized
898[ 20.386138] __mm_init_module
899[ 20.398781] qdf_dbg_mask value is invalid
900[ 20.398802] Using the default module debug levels instead
901[ 20.401762] qdf_print_ctrl_register: Allocated print control object 0
902[ 20.407205]
903 MINIDUMP VA .bss start=7faaf9c0 module=qdf
904[ 21.961359] wlan: [1272:E:CONFIG] cfg_uint_item_handler: 171: gScanProbeRepeatTime=50 - Out of range [0, 30]; Using 50
905[ 21.961434]
906 MINIDUMP VA .bss start=7fd143c0 module=umac*********initiating cold boot calibration*************
907*****starting cnssdaemon*****
908
909[ 22.290242] vmap allocation for size 1204224 failed: use vmalloc=<size> to increase size.
910[ 22.313692]
911 MINIDUMP VA .bss start=c1fdcf40 module=qca_ol*****cnssdaemon pid=1298*********
912
913[ 22.418173] =======ol_if_register_wifi3_0==========
914[ 22.418205] wlan: [1302:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:7f4d107c
915[ 22.422046] remoteproc remoteproc1: powering up q6v5-m3
916[ 22.441998] remoteproc remoteproc1: Booting fw image IPQ8074/m3_fw.mdt, size 284
917[ 22.442026] Sanity check passed for M3 image
918[ 22.466241] remoteproc remoteproc1: remote processor q6v5-m3 is now up
919[ 22.466322] wlan: [1302:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 2
920[ 22.471736] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done
921[ 22.478907] remoteproc remoteproc0: powering up q6v5-wcss
922[ 22.484486] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
923[ 22.490073] Sanity check passed for the image
924[ 23.112936] glink_core_link_up glink is up
925[ 23.113084] glink_xprt_open_event
926[ 23.113187] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
927[ 23.119347] Subsystem error monitoring/handling services are up
928[ 23.125755] remoteproc remoteproc0: remote processor q6v5-wcss is now up
929[ 23.126403] cnss: QMI WLFW service connected, state: 0x1
930[ 23.133938] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, 7f80c884
931[ 23.133978] cnss: device_id : 0xffff mem mode : [0]
932[ 23.134705] cnss: No board_id entry in device tree
933[ 23.139211] cnss: BDF location : 0x4b0c0000
934[ 23.139214] cnss: BDF IPQ8074/bdwlan.b10 size 131072
935[ 23.139799] cnss: BDF download response , result: 0, err: 0x0
936[ 23.140019] cnss: per device BDF location : 0x4b0e0000
937[ 23.140093] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000
938[ 23.140212] cnss: BDF download response , result: 0, err: 0x0
939[ 23.188617] wlan: [1302:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 3
940[ 23.195222] wlan: [1302:I:ANY] pld_ahb_wlan_enable: 681: cnss_mode: Cold boot calibration
941[ 23.275528] Coldboot calibration wait started
942
943
944
945BusyBox v1.25.1 (2019-09-11 16:17:58 CST) built-in shell (ash)
946
947 MM NM MMMMMMM M M
948 $MMMMM MMMMM MMMMMMMMMMM MMM MMM
949 MMMMMMMM MM MMMMM. MMMMM:MMMMMM: MMMM MMMMM
950MMMM= MMMMMM MMM MMMM MMMMM MMMM MMMMMM MMMM MMMMM'
951MMMM= MMMMM MMMM MM MMMMM MMMM MMMM MMMMNMMMMM
952MMMM= MMMM MMMMM MMMMM MMMM MMMM MMMMMMMM
953MMMM= MMMM MMMMMM MMMMM MMMM MMMM MMMMMMMMM
954MMMM= MMMM MMMMM, NMMMMMMMM MMMM MMMM MMMMMMMMMMM
955MMMM= MMMM MMMMMM MMMMMMMM MMMM MMMM MMMM MMMMMM
956MMMM= MMMM MM MMMM MMMM MMMM MMMM MMMM MMMM
957MMMM$ ,MMMMM MMMMM MMMM MMM MMMM MMMMM MMMM MMMM
958 MMMMMMM: MMMMMMM M MMMMMMMMMMMM MMMMMMM MMMMMMM
959 MMMMMM MMMMN M MMMMMMMMM MMMM MMMM
960 MMMM M MMMMMMM M M
961 M
962 ---------------------------------------------------------------
963 For those about to rock... (Chaos Calmer, 1c2406e+r49254)
964 ---------------------------------------------------------------
965root@(none):/# cat /e[ 29.875651] Coldboot calibration wait ended
966[ 29.876297] wlan: [1302:I:ANY] ol_ath_do_cold_boot_calibration: 467: Coldboot calib successful: radio_id 0x65535
967[ 29.879151] wlan: [1302:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0: (Atheros/multi-bss)
968[ 29.889094]
969 MINIDUMP VA .bss start=7f4d1340 module=wifi_3_0
970[ 29.900807] wlan: [1348:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 0
971[ 29.929072] remoteproc remoteproc0: stopped remote processor q6v5-wcss
972[ 29.929120] wlan: [1348:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 1
973[ 29.934733] glink_core_link_down glink is down
974[ 29.942061] <SSR>: glink SUBSYS_AFTER_SHUTDOWN cleanup done
975[ 29.946506] remoteproc remoteproc1: stopped remote processor q6v5-m3
976t[ 29.964608] cnss: QMI WLFW service disconnected, state: 0x6
977[ 29.984592] glink_xprt_close_event
978root@(none):/# cat /etc/[ 30.368501] vmap allocation for size 1204224 failed: use vmalloc=<size> to increase size.
979[ 30.392002]
980 MINIDUMP VA .bss start=c1fdcf40 module=qca_olc
981[ 30.489044] =======ol_if_register_wifi3_0==========
982[ 30.489075] wlan: [1356:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:7f4d107c
983[ 30.492918] remoteproc remoteproc1: powering up q6v5-m3
984[ 30.504441] remoteproc remoteproc1: Booting fw image IPQ8074/m3_fw.mdt, size 284
985[ 30.509307] Sanity check passed for M3 image
986[ 30.517335] remoteproc remoteproc1: remote processor q6v5-m3 is now up
987[ 30.521234] wlan: [1356:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 2
988[ 30.527631] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done
989[ 30.534763] remoteproc remoteproc0: powering up q6v5-wcss
990[ 30.540333] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
991[ 30.545929] Sanity check passed for the image
992root@(none):/# cat /etc/config/[ 30.884374] glink_core_link_up glink is up
993[ 30.884502] glink_xprt_open_event
994[ 30.884703] Subsystem error monitoring/handling services are up
995[ 30.884720] remoteproc remoteproc0: remote processor q6v5-wcss is now up
996[ 30.884778] wlan: [1356:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 3
997[ 30.903506] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
998[ 31.005637] cnss: QMI WLFW service connected, state: 0x1
999[ 31.006248] cnss: device_id : 0xffff mem mode : [0]
1000[ 31.010806] cnss: No board_id entry in device tree
1001[ 31.014834] cnss: BDF location : 0x4b0c0000
1002[ 31.019466] cnss: BDF IPQ8074/bdwlan.b10 size 131072
1003[ 31.023746] cnss: BDF download response , result: 0, err: 0x0
1004[ 31.029111] cnss: per device BDF location : 0x4b0e0000
1005[ 31.034450] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000
1006[ 31.039576] cnss: BDF download response , result: 0, err: 0x0
1007[ 31.084988] wlan: [1356:I:ANY] pld_ahb_wlan_enable: 685: cnss_mode: Mission mode
1008[ 31.091783] wlan: [1356:I:ANY] qca_napi_create: 357: qca_napi_create: napi instance 0 created on pipe 4
1009[ 31.091907] wlan: [1356:I:ANY] __ol_ath_attach: 3069: Allocated soc b8b00500
1010[ 31.100696] btcoex_support 0 wlan_prio_gpio 0
1011[ 31.108032] wlan: [1356:E:CONFIG] cfg_uint_item_handler: 171: dp_int_timer_threshold_tx=1000 - Out of range [8, 100]; Using 1000
1012[ 31.112335] wlan: [1356:I:ANY] osif_nss_wifi_soc_setup: 198: nss register id -1 nss config 0 Target Type 14
1013[ 31.123852] wlan: [1356:I:ANY] __ol_ath_attach: 3283: dev name soc0
1014[ 31.133741] wlan: [1356:I:ANY] ol_ath_soc_attach: 6539: WMI attached. wmi_handle b97a9800
1015[ 31.139684] wlan: [1356:I:ANY] htc_wmi_init: 5906: htc_wmi_init() HT Create . b89b3000
1016[ 31.147956] wlan: [1356:I:ANY] htc_wmi_init: 5913: htc_wmi_init() Skipping BMI Done.
1017[ 31.155855] wlan: [1356:I:ANY] htc_wmi_init: 5970: [htc_wmi_init:5970] host_enable 0 nss_nwifi_offload 0
1018[ 31.166319] wlan: [1356:I:ANY] ol_target_init_complete: 6088: CDP soc attach success
1019[ 31.173299] wlan: [1356:I:ANY] ol_target_init_complete: 6095: Soc attach success NSS config 0
1020[ 31.181077] wlan: [1356:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle b89b3000, ep 2, value 1
1021[ 31.189495] wlan: [1356:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle b89b3000, ep 3, value 1
1022[ 31.199121] Target failed service 0x106 connect request (status:1)
1023[ 31.208719] wlan: [1356:E:WMI] Failed to connect to WMI CONTROL service status:27
1024[ 31.208719]
1025[ 31.215470] wlan: [1313:I:TIF] init_deinit_populate_hw_mode_capability: 338: Preferred mode is not set, use mode id 1
1026[ 31.215470]
1027[ 31.223916] wlan: [1313:I:TIF] HE_CAP Info = 1a00010d
1028[ 31.235972] wlan: [1313:I:TIF] Num HW modes = 2
1029[ 31.241085] wlan: [1313:I:TIF] Num PHY = 2
1030[ 31.245431] wlan: [1313:I:TIF] Preferred HW Mode = 1 Num Radios = 2
1031[ 31.249600] wlan: [1313:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes,
1032[ 31.255770] wlan: [1313:I:TIF] init_deinit_add_11ax_modes: 1406: phy_id = 0 wireless modes = f97f9001
1033[ 31.264446] wlan: [1313:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes,
1034[ 31.273739] wlan: [1313:I:TIF] init_deinit_add_11ax_modes: 1406: phy_id = 1 wireless modes = 680680c
1035[ 31.282516] wlan: [1313:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 390: dfs_offload 1
1036[ 31.291625] wlan: [1313:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1038: dfs->dfs_psoc_idx: 0
1037[ 31.301865] wlan: [1313:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1044: dfs_soc_obj->num_dfs_privs: 1
1038[ 31.311474] wlan: [1313:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 362: Do not allocate DFS object for 2G, pdev_id = 1
1039wi[ 31.365193] wlan: [1313:I:TIF] init_deinit_update_pdev_tgt_info: 1064: CDP PDEV ATTACH success
1040[ 31.382863] wlan: [1313:I:TIF] init_deinit_update_pdev_tgt_info: 1064: CDP PDEV ATTACH success
1041r[ 31.483281] wlan: [1313:I:ANY] copy_fw_abi_version_tlv: 6258: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0
1042[ 31.685084] wlan: [1313:I:ANY] dp_peer_map_attach_wifi3: 9879: dp_peer_map_attach_wifi3 max_peers 1111, max_ast_index: 4112
1043[ 31.685084]
1044[ 31.685262] wlan: [1313:I:ANY] ready_extract_init_status_tlv: 8002: ready_extract_init_status_tlv:0
1045[ 31.696780] wlan: [1356:I:ANY] ol_ath_connect_htc: 1217: WMI is ready
1046[ 31.705650] wlan: [1356:E:WMI] wmi_unified_register_event_handler: Event id 37 is unavailable
1047[ 31.712119] wlan: [1356:E:WMI] wmi_unified_register_event_handler: Event id 141 is unavailable
1048[ 31.720630] wlan: [1356:E:WMI] wmi_unified_register_event_handler: Event id 137 is unavailable
1049[ 31.729142] wlan: [1356:I:ANY] ol_ath_soc_attach: 6613: connect HTC
1050[ 31.737723] wlan: [1356:I:ANY] ol_ath_soc_attach: 6614: bypasswmi : 0
1051[ 31.743887] wlan: [1356:E:WMI] wmi_unified_register_event_handler: Event id 38 is unavailable
1052[ 31.750489] wlan: [1356:E:WMI] wmi_unified_register_event_handler: Event id 138 is unavailable
1053[ 31.758996] wlan: [1356:E:WMI] wmi_unified_register_event_handler: Event id 139 is unavailable
1054[ 31.767507] wlan: [1356:E:WMI] wmi_unified_register_event_handler: Event id 55 is unavailable
1055[ 31.776097] wlan: [1356:E:WMI] wmi_unified_register_event_handler: Event id 49 is unavailable
1056[ 31.784696] wlan: [1356:E:WMI] wmi_unified_register_event_handler: Event id 25 is unavailable
1057[ 31.793193] wlan: [1356:I:ANY] ol_ath_soc_attach: 6683: ol_ath_soc_attach() UMAC attach .
1058[ 31.801723] wlan: [1356:I:ANY] ath_lowi_if_netlink_init: 177: ath_lowi_if_netlink_init LOWI Netlink successfully created
1059[ 31.809913] wlan: [1356:I:ANY] __ol_ath_attach: 3397: pdev_netdev name wifi0
1060[ 31.820893] wlan: [1356:I:ANY] __ol_ath_attach: 3442: Skip txrx_pdev_attach_target
1061[ 31.827919] wlan: [1356:I:ANY] __ol_ath_attach: 3466: BURSTING enabled by default
1062[ 31.835339] wlan: [1356:I:ANY] ol_ath_pdev_attach: 7146: interface_id 0
1063[ 31.842847] wlan: [1356:I:ANY] ol_ath_pdev_regdmn_init: 6837: phy id = 0 Modes supported
1064[ 31.849274] wlan: [1356:I:ANY] ol_ath_pdev_regdmn_init: 6844: 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1
1065[ 31.857613] wlan: [1356:I:ANY] ol_ath_pdev_regdmn_init: 6852: Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4910, hi_5g = 6100
1066[ 31.867862] wlan: [1356:I:ANY] ol_ath_update_wireless_modes: 1316: wireless_modes = f97f9001 before update
1067[ 31.882175] wlan: [1356:I:ANY] ol_ath_update_wireless_modes: 1331: Wireless_modes = f97f9001 after update
1068[ 31.891897] wlan: [1356:I:ANY] ol_ath_update_ext_caps: 1839: 11ax 5G supported case
1069[ 31.901642] wlan: [1356:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed
1070[ 31.909032] ieee80211_cbs_init CBS Inited
1071[ 31.918717] wlan: [1356:I:ANY] acfg_attach: 3458: acfg_attach: 3458: Netlink socket created:ad504000
1072[ 31.919588] wlan: [1356:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX
1073[ 31.928966] wlan: [1356:I:ANY] ol_ath_stats_attach: 2063: periodic_chan_stats: 1
1074[ 31.939811] wlan: [1356:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 25
1075[ 31.946513] wlan: [0:I:ANY] ol_ath_pdev_attach: 7482: Set global_ic[1], ptr:7fd146ec
1076[ 31.953871] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(b11fe004) Enabling DBDC Repeater 1
1077[ 31.961603] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(b11fe004) is_primary 1
1078[ 31.969676] wlan: [1356:I:ANY] ol_ath_pdev_attach: 7599: Pdev = 0 Number of peers = 529
1079[ 31.978532] wlan: [1356:E:CFR] tgt_cfr_init_pdev: 107: Error occurred with exit code 11
1080[ 31.978532]
1081[ 31.985997] wlan: [1356:E:CFR] wlan_cfr_pdev_open: 105: tgt_cfr_init_pdev failed with 11
1082[ 31.985997]
1083[ 31.995734] wlan: [1356:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 581: ( 1) chan 36 blocked from cfg
1084[ 32.005180] wlan: [1356:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 581: ( 2) chan 132 blocked from cfg
1085[ 32.014756] wlan: [1356:I:ANY] osif_wrap_attach: 239: osif wrap attached
1086[ 32.014756]
1087[ 32.024183] wlan: [1356:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done
1088[ 32.024183]
1089[ 32.032264] wlan: [1356:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =bbee5400 ic->ic_wrap_com=bbee5400 &wrap_com->wc_devt=bbee5400
1090[ 32.032264]
1091[ 32.041488] wlan: [1356:I:ANY] __ol_ath_attach: 3646: needed_headroom reservation 60
1092[ 32.055752] wlan: [1356:I:ANY] wlan_cfg80211_init: 9618: Number of 5G channels: 25
1093[ 32.063875] wlan: [1356:I:ANY] ieee80211_cfg80211_radio_attach: 9712: ic: 0xb6820500, wdev: 0xb682fca8, wiphy: 0xad504560, netdev: 0xb6820000
1094[ 32.071574] wlan: [1356:I:ANY] __ol_ath_attach: 3397: pdev_netdev name wifi1
1095[ 32.083959] wlan: [1356:I:ANY] __ol_ath_attach: 3442: Skip txrx_pdev_attach_target
1096[ 32.091141] wlan: [1356:I:ANY] __ol_ath_attach: 3466: BURSTING enabled by default
1097[ 32.098569] wlan: [1356:I:ANY] ol_ath_pdev_attach: 7146: interface_id 1
1098[ 32.106052] wlan: [1356:I:ANY] ol_ath_pdev_regdmn_init: 6837: phy id = 1 Modes supported
1099[ 32.112465] wlan: [1356:I:ANY] ol_ath_pdev_regdmn_init: 6844: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1
1100[ 32.120810] wlan: [1356:I:ANY] ol_ath_pdev_regdmn_init: 6852: Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0
1101[ 32.131057] wlan: [1356:I:ANY] ol_ath_update_wireless_modes: 1316: wireless_modes = 680680c before update
1102[ 32.145371] wlan: [1356:I:ANY] ol_ath_update_wireless_modes: 1331: Wireless_modes = 680680c after update
1103[ 32.155006] wlan: [1356:I:ANY] ol_ath_update_ext_caps: 1847: 11ax 2G supported case
1104[ 32.164654] wlan: [1356:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed
1105[ 32.171962] ieee80211_cbs_init CBS Inited
1106[ 32.181642] wlan: [1356:I:ANY] acfg_attach: 3433: Offload using existing sock ad504000
1107[ 32.182524] wlan: [1356:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX
1108[ 32.190513] wlan: [1356:I:ANY] ol_ath_stats_attach: 2063: periodic_chan_stats: 1
1109[ 32.200986] wlan: [1356:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 11
1110[ 32.208231] wlan: [0:I:ANY] ol_ath_pdev_attach: 7482: Set global_ic[2], ptr:7fd146ec
1111[ 32.215593] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(b11fe504) Enabling DBDC Repeater 1
1112[ 32.223318] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(b11fe504) is_primary 0
1113[ 32.231398] wlan: [1356:I:ANY] ol_ath_pdev_attach: 7599: Pdev = 1 Number of peers = 529
1114[ 32.240247] wlan: [1356:E:CFR] tgt_cfr_init_pdev: 107: Error occurred with exit code 11
1115[ 32.240247]
1116[ 32.247716] wlan: [1356:E:CFR] wlan_cfr_pdev_open: 105: tgt_cfr_init_pdev failed with 11
1117[ 32.247716]
1118[ 32.257453] wlan: [1356:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 581: ( 1) chan 36 blocked from cfg
1119[ 32.266899] wlan: [1356:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 581: ( 2) chan 132 blocked from cfg
1120[ 32.276458] wlan: [1356:I:ANY] osif_wrap_attach: 239: osif wrap attached
1121[ 32.276458]
1122[ 32.285906] wlan: [1356:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done
1123[ 32.285906]
1124[ 32.293977] wlan: [1356:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =bbdc0600 ic->ic_wrap_com=bbdc0600 &wrap_com->wc_devt=bbdc0600
1125[ 32.293977]
1126[ 32.303205] wlan: [1356:I:ANY] __ol_ath_attach: 3646: needed_headroom reservation 60
1127[ 32.317431] wlan: [1356:I:ANY] wlan_cfg80211_init: 9606: Number of 2G channels: 11
1128[ 32.325567] wlan: [1356:I:ANY] ieee80211_cfg80211_radio_attach: 9712: ic: 0xb6860500, wdev: 0xb686fca8, wiphy: 0xad505960, netdev: 0xb6860000
1129[ 32.333539] wlan: [1356:I:ANY] wlan_pdev_operation: 727: num_radios=1, wifi_radios[0].sc = b6820500_radio_type = 2
1130[ 32.345662] wlan: [1356:I:ANY] wlan_pdev_operation: 727: num_radios=2, wifi_radios[1].sc = b6860500_radio_type = 2
1131[ 32.356011] wlan: [1356:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0: (Atheros/multi-bss)
1132[ 32.366410]
1133 MINIDUMP VA .bss start=7f4d1340 module=wifi_3_0e
1134[ 32.454983] vmap allocation for size 557056 failed: use vmalloc=<size> to increase size.
1135[ 32.461069] wlan: [1407:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:c207a318
1136[ 32.462314] wlan: [1407:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:c207a318
1137[ 32.473871] wlan: [1407:I:ANY] init_ath_pci_2_0: 143: 6ath_ol_pci_2_0: (Atheros/multi-bss)
1138No Direct-Attach chipsets found.
1139
1140cat: can't open '/etc/config/wire': No such file or directory
1141root@(none):/# cat /etc/config/wire[ 35.697119] wlan: [1469:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 0
1142[ 35.697166] wlan: [1469:I:ANY] ol_ath_ahb_remove: 768: Suspending Target - with disable_intr set :soc0 (sc bda09000) soc=b8b00500
1143[ 35.703241] wlan: [1469:I:ANY] wlan_pdev_operation: 828: wlan_pdev_operation: disable_target_intr val is 1
1144[ 35.715082] wlan: [1469:I:ANY] wlan_pdev_operation: 828: wlan_pdev_operation: disable_target_intr val is 1
1145[ 35.724604] wlan: [1469:I:ANY] ol_ath_ahb_remove: 771: waiting for target paused event from target :soc0 (sc bda09000)
1146[ 35.734225] wlan: [1469:I:ANY] ol_ath_ahb_remove: 789: AHB Call to nss detach
1147[ 35.744899] wlan: [1469:I:ANY] ol_ath_ahb_remove: 792: Call to nss detach ops 00000000
1148[ 35.752138] wlan: [1469:E:SPECTRAL] os_if_spectral_free_skb: 491: Socket buffer is null
1149[ 35.760011] wlan: [1469:I:ANY] osif_wrap_devt_detach: 217: osif wrap dev table detached
1150[ 35.760011]
1151[ 35.768001] wlan: [1469:I:ANY] osif_wrap_detach: 271: osif wrap detached
1152[ 35.768001]
1153[ 35.777824] wlan: [1469:I:ANY] acfg_detach: 3485: acfg_detach Netlink socket released
1154[ 35.786005] wlan: [1469:E:CFR] tgt_cfr_deinit_pdev: 124: Error occurred with exit code 11
1155[ 35.786005]
1156[ 35.793598] wlan: [1469:E:CFR] cfr_deinitialize_pdev: 157: cfr_deinitialize_pdev status=11
1157[ 35.793598]
1158[ 35.803156] wlan: [0:I:ANY] ol_ath_pdev_detach: 7999: ol_ath_pdev_detach: remove global_ic[1]..gloabl_ic ptr:7fd146ec
1159[ 35.812794] wlan: [1469:I:ANY] ieee80211_cfg80211_radio_detach: 9745: ieee80211_cfg80211_radio_detach: ic: 0xb6820500, wdev: 0xb682fca8, netdev: 0xb6820000
1160[ 35.914669] PCIe: User of event deregistration is NULL
1161[ 35.944720] wlan: [1469:E:SPECTRAL] os_if_spectral_free_skb: 491: Socket buffer is null
1162[ 35.944795] wlan: [1469:I:ANY] osif_wrap_devt_detach: 217: osif wrap dev table detached
1163[ 35.944795]
1164[ 35.951524] wlan: [1469:I:ANY] osif_wrap_detach: 271: osif wrap detached
1165[ 35.951524]
1166[ 35.961544] wlan: [1469:E:CFR] tgt_cfr_deinit_pdev: 124: Error occurred with exit code 11
1167[ 35.961544]
1168[ 35.969327] wlan: [1469:E:CFR] cfr_deinitialize_pdev: 157: cfr_deinitialize_pdev status=11
1169[ 35.969327]
1170[ 35.978877] wlan: [0:I:ANY] ol_ath_pdev_detach: 7999: ol_ath_pdev_detach: remove global_ic[0]..gloabl_ic ptr:7fd146ec
1171[ 35.988516] wlan: [1469:I:ANY] ieee80211_cfg80211_radio_detach: 9745: ieee80211_cfg80211_radio_detach: ic: 0xb6860500, wdev: 0xb686fca8, netdev: 0xb6860000
1172[ 36.104672] PCIe: User of event deregistration is NULL
1173[ 36.204645] wlan: [1469:I:ANY] ath_lowi_if_netlink_delete: 195: ath_lowi_if_netlink_delete Going to decrement current LOWI netlink ref count: 1
1174[ 36.204740] wlan: [1469:I:ANY] ol_ath_phyerr_detach: 341: 6ol_ath_phyerr_detach: called
1175[ 36.216376] wlan: [1469:E:WMI] Event id 55 is unavailable
1176[ 36.224651] wlan: [1469:E:WMI] Event id 141 is unavailable
1177[ 36.229934] wlan: [1469:E:WMI] Event id 137 is unavailable
1178[ 36.235323] wlan: [1469:E:WMI] Event id 37 is unavailable
1179[ 36.354621] cnss: QMI WLFW service disconnected, state: 0x7
1180[ 36.354880] ath_ahb_remove
1181[ 36.384298] remoteproc remoteproc0: stopped remote processor q6v5-wcss
1182[ 36.384336] wlan: [1469:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 1
1183[ 36.389901] glink_core_link_down glink is down
1184[ 36.397302] <SSR>: glink SUBSYS_AFTER_SHUTDOWN cleanup done
1185[ 36.401718] remoteproc remoteproc1: stopped remote processor q6v5-m3
1186[ 36.424597] glink_xprt_close_event
1187[ 36.537006] wlan: [1503:F:SER] wlan_serialization_deinit: 602: deregistered callbacks with obj mgr successfully
1188[ 36.711620] configuring additional NSS pbufs
1189[ 36.733794] additional pbufs of size 9003008 got added to NSS
1190[ 36.752135] qdf_dbg_mask value is invalid
1191[ 36.752156] Using the default module debug levels instead
1192[ 36.755130] qdf_print_ctrl_register: Allocated print control object 0
1193[ 36.760552]
1194root@(none):/#
1195root@(none):/#
1196root@(none):/#
1197root@(none):/#
1198root@(none):/#
1199root@(none):/#
1200root@(none):/#
1201root@(none):/#
1202root@(none):/#
1203root@(none):/#
1204root@(none):/#
1205[ 38.228053] wlan: [1560:E:CONFIG] cfg_uint_item_handler: 171: gScanProbeRepeatTime=50 - Out of range [0, 30]; Using 50
1206[ 38.228132]
1207 MINIDUMP VA .bss start=7fceb3c0 module=umac
1208root@(none):/# ******Not the first boot. Skip coldboot calibration*****
1209
1210root@(none):/#
1211root@(none):/#
1212root@(none):/#
1213root@(none):/#
1214root@(none):/#
1215root@(none):/#
1216root@(none):/#
1217root@(none):/#
1218[ 38.508160] vmap allocation for size 1204224 failed: use vmalloc=<size> to increase size.
1219
1220root@(none):/# [ 38.531321]
1221 MINIDUMP VA .bss start=c2150f40 module=qca_ol
1222[ 38.623828] vmap allocation for size 602112 failed: use vmalloc=<size> to increase size.
1223[ 38.628027] =======ol_if_register_wifi3_0==========
1224[ 38.631150] wlan: [1576:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:1 with soc_ops:c1f6207c
1225[ 38.635801] remoteproc remoteproc1: powering up q6v5-m3
1226[ 38.647291] remoteproc remoteproc1: Booting fw image IPQ8074/m3_fw.mdt, size 284
1227[ 38.652156] Sanity check passed for M3 image
1228[ 38.660242] remoteproc remoteproc1: remote processor q6v5-m3 is now up
1229[ 38.664090] wlan: [1576:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 2
1230[ 38.670484] <SSR>: glink SUBSYS_BEFOER_POWERUP reinit done
1231[ 38.677598] remoteproc remoteproc0: powering up q6v5-wcss
1232[ 38.683198] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
1233[ 38.688781] Sanity check passed for the image
1234[ 39.027213] glink_core_link_up glink is up
1235[ 39.027344] glink_xprt_open_event
1236[ 39.027455] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
1237[ 39.033619] Subsystem error monitoring/handling services are up
1238[ 39.040059] remoteproc remoteproc0: remote processor q6v5-wcss is now up
1239[ 39.045919] cnss: QMI WLFW service connected, state: 0x1
1240[ 39.046337] wlan: [1576:I:ANY] ol_ath_ahb_ssr: 183: ol_ath_ahb_ssr: SSR event 3
1241[ 39.058111] cnss: device_id : 0xffff mem mode : [0]
1242[ 39.065584] cnss: No board_id entry in device tree
1243[ 39.069997] cnss: BDF location : 0x4b0c0000
1244[ 39.074657] cnss: BDF IPQ8074/bdwlan.b10 size 131072
1245[ 39.078926] cnss: BDF download response , result: 0, err: 0x0
1246[ 39.084106] cnss: per device BDF location : 0x4b0e0000
1247[ 39.089641] cnss: CALDATA IPQ8074/caldata.bin size 131072 offset 0x20000
1248[ 39.094722] cnss: BDF download response , result: 0, err: 0x0
1249[ 39.146543] wlan: [1576:I:ANY] pld_ahb_wlan_enable: 685: cnss_mode: Mission mode
1250[ 39.153338] wlan: [1576:I:ANY] qca_napi_create: 357: qca_napi_create: napi instance 0 created on pipe 4
1251[ 39.153460] wlan: [1576:I:ANY] __ol_ath_attach: 3069: Allocated soc ada00500
1252[ 39.162316] btcoex_support 0 wlan_prio_gpio 0
1253[ 39.169629] wlan: [1576:E:CONFIG] cfg_uint_item_handler: 171: dp_int_timer_threshold_tx=1000 - Out of range [8, 100]; Using 1000
1254[ 39.173908] wlan: [1576:I:ANY] osif_nss_wifi_soc_setup: 186: nss-wifili:#1 register wifili function for soc
1255[ 39.185529] wlan: [1576:I:ANY] osif_nss_wifi_soc_setup: 198: nss register id -1 nss config 3 Target Type 14
1256[ 39.195312] wlan: [1576:I:ANY] __ol_ath_attach: 3283: dev name soc0
1257[ 39.205183] wlan: [1576:I:ANY] ol_ath_soc_attach: 6539: WMI attached. wmi_handle bc607400
1258[ 39.211078] wlan: [1576:I:ANY] htc_wmi_init: 5906: htc_wmi_init() HT Create . ad677000
1259[ 39.219359] wlan: [1576:I:ANY] htc_wmi_init: 5913: htc_wmi_init() Skipping BMI Done.
1260[ 39.227257] wlan: [1576:I:ANY] htc_wmi_init: 5970: [htc_wmi_init:5970] host_enable 0 nss_nwifi_offload 0
1261[ 39.237806] wlan: [1576:I:ANY] ol_target_init_complete: 6088: CDP soc attach success
1262[ 39.244695] wlan: [1576:I:ANY] ol_target_init_complete: 6095: Soc attach success NSS config 0
1263[ 39.252467] wlan: [1576:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle ad677000, ep 2, value 1
1264[ 39.260914] wlan: [1576:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle ad677000, ep 3, value 1
1265[ 39.271143] wlan: [113:I:TIF] HE_CAP Info = 1a00010d
1266[ 39.280132] wlan: [113:I:TIF] Num HW modes = 2
1267[ 39.285211] wlan: [113:I:TIF] Num PHY = 2
1268[ 39.289462] wlan: [113:I:TIF] Preferred HW Mode = 1 Num Radios = 2
1269[ 39.293545] wlan: [113:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes,
1270[ 39.299637] wlan: [113:I:TIF] init_deinit_add_11ax_modes: 1406: phy_id = 0 wireless modes = f97f9001
1271[ 39.308304] wlan: [113:I:TIF] init_deinit_add_11ax_modes: 1403: Adding 11ax regulatory modes,
1272[ 39.317618] wlan: [113:I:TIF] init_deinit_add_11ax_modes: 1406: phy_id = 1 wireless modes = 680680c
1273[ 39.326125] wlan: [113:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 390: dfs_offload 1
1274[ 39.335168] wlan: [113:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1038: dfs->dfs_psoc_idx: 0
1275[ 39.344951] wlan: [113:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 1044: dfs_soc_obj->num_dfs_privs: 1
1276[ 39.354909] wlan: [113:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 362: Do not allocate DFS object for 2G, pdev_id = 1
1277[ 39.381546] wlan: [113:I:TIF] init_deinit_update_pdev_tgt_info: 1064: CDP PDEV ATTACH success
1278[ 39.395737] wlan: [113:I:TIF] init_deinit_update_pdev_tgt_info: 1064: CDP PDEV ATTACH success
1279[ 39.496099] wlan: [113:I:ANY] copy_fw_abi_version_tlv: 6258: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0
1280[ 39.697867] wlan: [113:I:ANY] dp_peer_map_attach_wifi3: 9879: dp_peer_map_attach_wifi3 max_peers 1111, max_ast_index: 4112
1281[ 39.697867]
1282[ 39.698054] wlan: [113:I:ANY] ready_extract_init_status_tlv: 8002: ready_extract_init_status_tlv:0
1283[ 39.709266] wlan: [1576:I:ANY] ol_ath_connect_htc: 1217: WMI is ready
1284[ 39.773274] wlan: [1576:E:WMI] wmi_unified_register_event_handler: Event id 37 is unavailable
1285[ 39.773306] wlan: [1576:E:WMI] wmi_unified_register_event_handler: Event id 141 is unavailable
1286[ 39.780937] wlan: [1576:E:WMI] wmi_unified_register_event_handler: Event id 137 is unavailable
1287[ 39.789411] wlan: [1576:I:ANY] ol_ath_soc_attach: 6613: connect HTC
1288[ 39.797992] wlan: [1576:I:ANY] ol_ath_soc_attach: 6614: bypasswmi : 0
1289[ 39.804151] wlan: [1576:E:WMI] wmi_unified_register_event_handler: Event id 38 is unavailable
1290[ 39.810753] wlan: [1576:E:WMI] wmi_unified_register_event_handler: Event id 138 is unavailable
1291[ 39.819268] wlan: [1576:E:WMI] wmi_unified_register_event_handler: Event id 139 is unavailable
1292[ 39.827769] wlan: [1576:E:WMI] wmi_unified_register_event_handler: Event id 55 is unavailable
1293[ 39.836364] wlan: [1576:E:WMI] wmi_unified_register_event_handler: Event id 49 is unavailable
1294[ 39.844962] wlan: [1576:E:WMI] wmi_unified_register_event_handler: Event id 25 is unavailable
1295[ 39.853460] wlan: [1576:I:ANY] ol_ath_soc_attach: 6683: ol_ath_soc_attach() UMAC attach .
1296[ 39.861993] wlan: [1576:I:ANY] ath_lowi_if_netlink_init: 177: ath_lowi_if_netlink_init LOWI Netlink successfully created
1297[ 39.870179] wlan: [1576:I:ANY] __ol_ath_attach: 3397: pdev_netdev name wifi0
1298[ 39.881394] wlan: [1576:I:ANY] __ol_ath_attach: 3442: Skip txrx_pdev_attach_target
1299[ 39.888184] wlan: [1576:I:ANY] __ol_ath_attach: 3466: BURSTING enabled by default
1300[ 39.895751] wlan: [1576:I:ANY] ol_ath_pdev_attach: 7146: interface_id 0
1301[ 39.903124] wlan: [1576:I:ANY] ol_ath_pdev_regdmn_init: 6837: phy id = 0 Modes supported
1302[ 39.909535] wlan: [1576:I:ANY] ol_ath_pdev_regdmn_init: 6844: 11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1
1303[ 39.918005] wlan: [1576:I:ANY] ol_ath_pdev_regdmn_init: 6852: Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4910, hi_5g = 6100
1304[ 39.928153] wlan: [1576:I:ANY] ol_ath_update_wireless_modes: 1316: wireless_modes = f97f9001 before update
1305[ 39.942569] wlan: [1576:I:ANY] ol_ath_update_wireless_modes: 1331: Wireless_modes = f97f9001 after update
1306[ 39.952190] wlan: [1576:I:ANY] ol_ath_update_ext_caps: 1839: 11ax 5G supported case
1307[ 39.962390] wlan: [1576:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed
1308[ 39.969317] ieee80211_cbs_init CBS Inited
1309[ 39.979124] wlan: [1576:I:ANY] acfg_attach: 3458: acfg_attach: 3458: Netlink socket created:ae267c00
1310[ 39.979857] wlan: [1576:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX
1311[ 39.989457] wlan: [1576:I:ANY] ol_ath_stats_attach: 2063: periodic_chan_stats: 1
1312[ 40.001971] wlan: [1576:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 25
1313[ 40.006735] wlan: [0:I:ANY] ol_ath_pdev_attach: 7482: Set global_ic[1], ptr:7fceb6ec
1314[ 40.014025] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(b8f31604) Enabling DBDC Repeater 1
1315[ 40.021816] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
1316[ 40.029894] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(b8f31604) is_primary 1
1317[ 40.038181] wlan: [1576:I:ANY] ol_ath_pdev_attach: 7599: Pdev = 0 Number of peers = 529
1318[ 40.046881] wlan: [1576:E:CFR] tgt_cfr_init_pdev: 107: Error occurred with exit code 11
1319[ 40.046881]
1320[ 40.054285] wlan: [1576:E:CFR] wlan_cfr_pdev_open: 105: tgt_cfr_init_pdev failed with 11
1321[ 40.054285]
1322[ 40.063997] wlan: [1576:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 581: ( 1) chan 36 blocked from cfg
1323[ 40.073458] wlan: [1576:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 581: ( 2) chan 132 blocked from cfg
1324[ 40.083079] wlan: [1576:I:ANY] osif_wrap_attach: 239: osif wrap attached
1325[ 40.083079]
1326[ 40.092439] wlan: [1576:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done
1327[ 40.092439]
1328[ 40.100513] wlan: [1576:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =b24bc400 ic->ic_wrap_com=b24bc400 &wrap_com->wc_devt=b24bc400
1329[ 40.100513]
1330[ 40.109805] wlan: [1576:I:ANY] __ol_ath_attach: 3646: needed_headroom reservation 60
1331[ 40.123960] wlan: [1576:I:ANY] ol_ath_enable_fraglist: 2936: Enabled Fraglist bit for the radio wifi0 features 41
1332[ 40.132015] wlan: [1576:I:ANY] wlan_cfg80211_init: 9618: Number of 5G channels: 25
1333[ 40.142302] wlan: [1576:I:ANY] ieee80211_cfg80211_radio_attach: 9712: ic: 0xad700500, wdev: 0xad70fca8, wiphy: 0xaca5c160, netdev: 0xad700000
1334[ 40.150189] wlan: [1576:I:ANY] __ol_ath_attach: 3397: pdev_netdev name wifi1
1335[ 40.162694] wlan: [1576:I:ANY] __ol_ath_attach: 3442: Skip txrx_pdev_attach_target
1336[ 40.169766] wlan: [1576:I:ANY] __ol_ath_attach: 3466: BURSTING enabled by default
1337[ 40.177165] wlan: [1576:I:ANY] ol_ath_pdev_attach: 7146: interface_id 1
1338[ 40.184686] wlan: [1576:I:ANY] ol_ath_pdev_regdmn_init: 6837: phy id = 1 Modes supported
1339[ 40.191048] wlan: [1576:I:ANY] ol_ath_pdev_regdmn_init: 6844: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1
1340[ 40.199402] wlan: [1576:I:ANY] ol_ath_pdev_regdmn_init: 6852: Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0
1341[ 40.209675] wlan: [1576:I:ANY] ol_ath_update_wireless_modes: 1316: wireless_modes = 680680c before update
1342[ 40.224037] wlan: [1576:I:ANY] ol_ath_update_wireless_modes: 1331: Wireless_modes = 680680c after update
1343[ 40.233617] wlan: [1576:I:ANY] ol_ath_update_ext_caps: 1847: 11ax 2G supported case
1344[ 40.243315] wlan: [1576:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed
1345[ 40.250544] ieee80211_cbs_init CBS Inited
1346[ 40.260209] wlan: [1576:I:ANY] acfg_attach: 3433: Offload using existing sock ae267c00
1347[ 40.261086] wlan: [1576:I:ANY] ol_if_eeprom_attach: 1459: rate power table override is only supported for AR98XX
1348[ 40.269094] wlan: [1576:I:ANY] ol_ath_stats_attach: 2063: periodic_chan_stats: 1
1349[ 40.279610] wlan: [1576:I:ANY] wlan_scan_update_channel_list: 1090: num_chan: 11
1350[ 40.286805] wlan: [0:I:ANY] ol_ath_pdev_attach: 7482: Set global_ic[2], ptr:7fceb6ec
1351[ 40.294150] wlan: [0:I:ANY] dp_lag_soc_enable: 88: pdev(b8eebd84) Enabling DBDC Repeater 1
1352[ 40.301932] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
1353[ 40.310007] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 44: pdev(b8eebd84) is_primary 0
1354[ 40.318611] wlan: [1576:I:ANY] ol_ath_pdev_attach: 7599: Pdev = 1 Number of peers = 529
1355[ 40.326950] wlan: [1576:E:CFR] tgt_cfr_init_pdev: 107: Error occurred with exit code 11
1356[ 40.326950]
1357[ 40.334486] wlan: [1576:E:CFR] wlan_cfr_pdev_open: 105: tgt_cfr_init_pdev failed with 11
1358[ 40.334486]
1359[ 40.344127] wlan: [1576:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 581: ( 1) chan 36 blocked from cfg
1360[ 40.353556] wlan: [1576:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 581: ( 2) chan 132 blocked from cfg
1361[ 40.363140] wlan: [1576:I:ANY] osif_wrap_attach: 239: osif wrap attached
1362[ 40.363140]
1363[ 40.372564] wlan: [1576:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done
1364[ 40.372564]
1365[ 40.380676] wlan: [1576:I:ANY] osif_wrap_attach: 247: Wrap Attached: Wrap_com =b24bda00 ic->ic_wrap_com=b24bda00 &wrap_com->wc_devt=b24bda00
1366[ 40.380676]
1367[ 40.389865] wlan: [1576:I:ANY] __ol_ath_attach: 3646: needed_headroom reservation 60
1368[ 40.404113] wlan: [1576:I:ANY] ol_ath_enable_fraglist: 2936: Enabled Fraglist bit for the radio wifi1 features 41
1369[ 40.412068] wlan: [1576:I:ANY] wlan_cfg80211_init: 9606: Number of 2G channels: 11
1370[ 40.422383] wlan: [1576:I:ANY] ieee80211_cfg80211_radio_attach: 9712: ic: 0xadae0500, wdev: 0xadaefca8, wiphy: 0xaca5d560, netdev: 0xadae0000
1371[ 40.430622] wlan: [1576:I:ANY] wlan_pdev_operation: 727: num_radios=1, wifi_radios[0].sc = ad700500_radio_type = 2
1372[ 40.442710] wlan: [1576:I:ANY] wlan_pdev_operation: 727: num_radios=2, wifi_radios[1].sc = adae0500_radio_type = 2
1373[ 40.453142] wlan: [1576:I:ANY] init_ath_pci_3_0: 151: 6ath_ol_pci_wifi3.0: (Atheros/multi-bss)
1374[ 40.463469]
1375 MINIDUMP VA .bss start=c1f62340 module=wifi_3_0
1376[ 40.518548] vmap allocation for size 557056 failed: use vmalloc=<size> to increase size.
1377[ 40.524844] wlan: [1627:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:c2039318
1378[ 40.525907] wlan: [1627:I:ANY] osif_nss_register_module: 90: NSS wifi ops registered for target_type:0 with soc_ops:c2039318
1379[ 40.537525] wlan: [1627:I:ANY] init_ath_pci_2_0: 143: 6ath_ol_pci_2_0: (Atheros/multi-bss)
1380acfg_tool: Issuing blocking call to wait for events
1381
1382root@(none):/# [ 42.384582] NET: Unregistered protocol family 15
1383cat [ 43.426033] vmap allocation for size 811008 failed: use vmalloc=<size> to increase size.
1384[ 43.440491] ECM init
1385[ 43.440541] ECM database jhash random seed: 0xb2e1df3b
1386[ 43.442586] ECM init complete
1387/lbd: stopping daemon
1388et[ 43.863824] device eth1 entered promiscuous mode
1389[ 43.865336] br-lan: port 1(eth1) entered forwarding state
1390[ 43.867564] br-lan: port 1(eth1) entered forwarding state
1391[ 43.879025] __mc_netlink_receive: Disable bridge snooping!
1392[ 43.881519] device eth2 entered promiscuous mode
1393[ 43.883723] br-lan: port 2(eth2) entered forwarding state
1394[ 43.888421] br-lan: port 2(eth2) entered forwarding state
1395[ 43.904321] device eth3 entered promiscuous mode
1396[ 43.904393] br-lan: port 3(eth3) entered forwarding state
1397[ 43.908086] br-lan: port 3(eth3) entered forwarding state
1398[ 43.919147] device eth4 entered promiscuous mode
1399[ 43.919219] br-lan: port 4(eth4) entered forwarding state
1400[ 43.923437] br-lan: port 4(eth4) entered forwarding state
1401[ 43.935685] device eth5 entered promiscuous mode
1402[ 43.935779] br-lan: port 5(eth5) entered forwarding state
1403[ 43.939428] br-lan: port 5(eth5) entered forwarding state
1404root@(none):/# cat /etc/acfg_tool: Issuing blocking call to wait for events
1405lbd: stopping daemon
1406[ 44.197999] __mc_netlink_receive: Disable bridge snooping!
1407acfg_tool: Issuing blocking call to wait for events
1408qcawifi qcawificfg80211 disable radio wifi0
1409qcawifi qcawificfg80211 disable radio wifi1
1410[ 44.381416] eth2: PHY Link up speed: 1000
1411acfg_tool: Issuing blocking call to wait for events
1412qcawifi qcawificfg80211 disable radio wifi0
1413acfg_tool: Issuing blocking call to wait for events
1414qcawifi qcawificfg80211 disable radio wifi1
1415[ 44.682859] __mc_netlink_receive: Enable bridge snooping!
1416[ 44.854665] br-lan: port 1(eth1) entered disabled state
1417[ 44.855233] br-lan: port 3(eth3) entered disabled state
1418[ 44.858816] br-lan: port 4(eth4) entered disabled state
1419[ 44.864374] br-lan: port 5(eth5) entered disabled state
1420root@(none):/# cat /etc/config/[ 45.884654] br-lan: port 2(eth2) entered forwarding state
1421[ 45.936249] __mc_netlink_receive: Disable bridge snooping!
1422[ 46.018998] __mc_netlink_receive: Enable bridge snooping!
1423
1424acd lbd openvpn_recipes system
1425cnss_diag lldpd pppoe thermal
1426ddns luci qcacfg80211 ubootenv
1427dhcp macsec repacd ucitrack
1428dhcrelay mcproxy ripd uhttpd
1429dropbear mcsd rpcd upnpd
1430ecm multiwan rstp wireless
1431firewall network skb_recycler wsplcd
1432hyd nss ssid-steering
1433ipsec openvpn sysstat
1434root@(none):/# cat /etc/config/wireless
1435config wifi-device wifi0
1436 option type qcawificfg80211
1437 option channel auto
1438 option macaddr 00:03:7f:12:a0:5f
1439 option hwmode 11axa
1440 # REMOVE THIS LINE TO ENABLE WIFI:
1441 option disabled 1
1442
1443config wifi-iface
1444 option device wifi0
1445 option network lan
1446 option mode ap
1447 option ssid OpenWrt
1448 option encryption none
1449
1450config wifi-device wifi1
1451 option type qcawificfg80211
1452 option channel auto
1453 option macaddr 00:03:7f:12:d2:7f
1454 option hwmode 11axg
1455 # REMOVE THIS LINE TO ENABLE WIFI:
1456 option disabled 1
1457
1458config wifi-iface
1459 option device wifi1
1460 option network lan
1461 option mode ap
1462 option ssid OpenWrt
1463 option encryption none
1464
1465root@OpenWrt:/#