· 6 years ago · Feb 25, 2020, 01:30 PM
1
2
3coreboot-v4.11.0.3-57-gba91eca881-dirty-v4.10.0.2 Mon Feb 24 09:08:34 UTC 2020 bootblock starting (log level: 7)...
4FMAP: area COREBOOT found @ 194000 (6733824 bytes)
5CBFS: Locating 'fallback/romstage'
6CBFS: Found @ offset 80 size d764
7BS: bootblock times (exec / console): total (unknown) / 11 ms
8
9
10coreboot-v4.11.0.3-57-gba91eca881-dirty-v4.10.0.2 Mon Feb 24 09:08:34 UTC 2020 romstage starting (log level: 7)...
11APIC 00: CPU Family_Model = 00730f01
12
13APIC 00: ** Enter AmdInitReset [00028000]
14FMAP: area COREBOOT found @ 194000 (6733824 bytes)
15CBFS: Locating 'bootorder'
16CBFS: 'bootorder' not found.
17file [bootorder] not found in CBFS
18Missing bootorder data.
19Missing or invalid scon knob, enable console.
20PC Engines apu2
21coreboot build 20202402
22BIOS version v4.10.0.2
23FMAP: area COREBOOT found @ 194000 (6733824 bytes)
24CBFS: Locating 'bootorder'
25CBFS: 'bootorder' not found.
26file [bootorder] not found in CBFS
27Missing bootorder data.
28Missing or invalid mpcie2_clk knob, forcing CLK of mPCIe2 slot is not enabled.
29Fch OEM config in INIT RESET
30Fch OEM config in INIT RESET Done
31AmdInitReset() returned AGESA_SUCCESS
32APIC 00: Heap in LocalCache (2) at 0x00400000
33APIC 00: ** Exit AmdInitReset [00028000]
34
35APIC 00: ** Enter AmdInitEarly [00023000]
36FMAP: area COREBOOT found @ 194000 (6733824 bytes)
37CBFS: Locating 'bootorder'
38CBFS: 'bootorder' not found.
39file [bootorder] not found in CBFS
40Missing bootorder data.
41Missing or invalid boost knob, disable CPU boost.
42FMAP: area COREBOOT found @ 194000 (6733824 bytes)
43CBFS: Locating 'bootorder'
44CBFS: 'bootorder' not found.
45file [bootorder] not found in CBFS
46Missing bootorder data.
47Watchdog is enabled, state = 0x1, time = 65535
48AmdInitEarly() returned AGESA_SUCCESS
49APIC 00: Heap in LocalCache (2) at 0x00400000
50APIC 00: ** Exit AmdInitEarly [00023000]
51
52APIC 00: ** Enter AmdInitPost [00027000]
53FMAP: area COREBOOT found @ 194000 (6733824 bytes)
54CBFS: Locating 'spd.bin'
55CBFS: Found @ offset 209c0 size 100
56AmdInitPost() returned AGESA_SUCCESS
57APIC 00: Heap in TempMem (3) at 0x000b0000
58APIC 00: ** Exit AmdInitPost [00027000]
59CBMEM:
60IMD: root @ 0xcffff000 254 entries.
61IMD: root @ 0xcfffec00 62 entries.
62MTRR Range: Start=0 End=80000000 (Size 80000000)
63MTRR Range: Start=80000000 End=c0000000 (Size 40000000)
64MTRR Range: Start=c0000000 End=d0000000 (Size 10000000)
65MTRR Range: Start=ff800000 End=0 (Size 800000)
66Found TPM SLB9665 TT 2.0 by Infineon
67tlcl_send_startup: Startup return code is 0
68TPM: setup succeeded
69src/security/tpm/tss/tcg-2.0/tss.c:219 index 0x1007 return code 0
70TCPA: Clearing coreboot TCPA log
71FMAP: area COREBOOT found @ 194000 (6733824 bytes)
72CBFS: Locating 'bootblock'
73CBFS: Found @ offset 663fc0 size 8000
74FMAP: area COREBOOT found @ 194000 (6733824 bytes)
75tlcl_extend: response is 0
76TPM: Measured FMAP: COREBOOT CBFS: bootblock into PCR 2
77FMAP: area COREBOOT found @ 194000 (6733824 bytes)
78CBFS: Locating 'fallback/romstage'
79CBFS: Found @ offset 80 size d764
80FMAP: area COREBOOT found @ 194000 (6733824 bytes)
81tlcl_extend: response is 0
82TPM: Measured FMAP: COREBOOT CBFS: fallback/romstage into PCR 2
83Phase 1
84FMAP: area GBB found @ a5000 (978944 bytes)
85VB2:vb2_check_recovery() Recovery reason from previous boot: 0x0 / 0x0
86VB2:vb2_check_recovery() Recovery was requested manually
87VB2:vb2_check_recovery() We have a recovery request: 0x2 / 0x0
88Recovery requested (1009000e)
89tlcl_extend: response is 0
90tlcl_extend: response is 0
91FMAP: area COREBOOT found @ 194000 (6733824 bytes)
92CBFS: Locating 'fallback/postcar'
93CBFS: Found @ offset 20b00 size 7b54
94FMAP: area COREBOOT found @ 194000 (6733824 bytes)
95tlcl_extend: response is 0
96TPM: Measured FMAP: COREBOOT CBFS: fallback/postcar into PCR 2
97Decompressing stage fallback/postcar @ 0xcffa2fc0 (47912 bytes)
98Loading module at 0xcffa3000 with entry 0xcffa3000. filesize: 0x75d0 memsize: 0xbae8
99Processing 330 relocs. Offset value of 0xcdfa3000
100BS: romstage times (exec / console): total (unknown) / 166 ms
101
102
103coreboot-v4.11.0.3-57-gba91eca881-dirty-v4.10.0.2 Mon Feb 24 09:08:34 UTC 2020 postcar starting (log level: 7)...
104FMAP: area COREBOOT found @ 194000 (6733824 bytes)
105CBFS: Locating 'fallback/ramstage'
106CBFS: Found @ offset d880 size 12bc2
107FMAP: area COREBOOT found @ 194000 (6733824 bytes)
108Found TPM SLB9665 TT 2.0 by Infineon
109tlcl_extend: response is 0
110TPM: Measured FMAP: COREBOOT CBFS: fallback/ramstage into PCR 2
111Decompressing stage fallback/ramstage @ 0xcfeb0fc0 (985368 bytes)
112Loading module at 0xcfeb1000 with entry 0xcfeb1000. filesize: 0x26150 memsize: 0xf08d8
113Processing 2754 relocs. Offset value of 0xcf0b1000
114BS: postcar times (exec / console): total (unknown) / 28 ms
115
116
117coreboot-v4.11.0.3-57-gba91eca881-dirty-v4.10.0.2 Mon Feb 24 09:08:34 UTC 2020 ramstage starting (log level: 7)...
118FMAP: area COREBOOT found @ 194000 (6733824 bytes)
119CBFS: Locating 'AGESA'
120CBFS: Found @ offset 46bfc0 size 7b0e0
121FMAP: area COREBOOT found @ 194000 (6733824 bytes)
122Found TPM SLB9665 TT 2.0 by Infineon
123tlcl_extend: response is 0
124TPM: Measured FMAP: COREBOOT CBFS: AGESA into PCR 2
125
126APIC 00: ** Enter AmdInitEnv [00024000]
127Wiped HEAP at [10000000 - 1002ffff]
128Fch OEM config in INIT ENV
129Fch OEM config in INIT ENV Done
130AmdInitEnv() returned AGESA_SUCCESS
131APIC 00: Heap in SystemMem (4) at 0x10000014
132APIC 00: ** Exit AmdInitEnv [00024000]
133BS: BS_PRE_DEVICE entry times (exec / console): 126 / 25 ms
134Enumerating buses...
135Mainboard apu2 Enable.
136FMAP: area COREBOOT found @ 194000 (6733824 bytes)
137CBFS: Locating 'bootorder'
138CBFS: 'bootorder' not found.
139file [bootorder] not found in CBFS
140Missing bootorder data.
141Missing or invalid scon knob, enable console.
142FMAP: area COREBOOT found @ 194000 (6733824 bytes)
143CBFS: Locating 'bootorder'
144CBFS: 'bootorder' not found.
145file [bootorder] not found in CBFS
146Missing bootorder data.
147Missing or invalid uart knob, disable port.
148UARTC disabled
149FMAP: area COREBOOT found @ 194000 (6733824 bytes)
150CBFS: Locating 'bootorder'
151CBFS: 'bootorder' not found.
152file [bootorder] not found in CBFS
153Missing bootorder data.
154Missing or invalid uart knob, disable port.
155UARTD disabled
156setup_bsp_ramtop, TOP MEM: msr.lo = 0xd0000000, msr.hi = 0x00000000
157setup_bsp_ramtop, TOP MEM2: msr.lo = 0x2f000000, msr.hi = 0x00000001
1584080 MBFMAP: area COREBOOT found @ 194000 (6733824 bytes)
159CBFS: Locating 'spd.bin'
160CBFS: Found @ offset 209c0 size 100
161FMAP: area COREBOOT found @ 194000 (6733824 bytes)
162tlcl_extend: response is 0
163TPM: Measured FMAP: COREBOOT CBFS: spd.bin into PCR 2
164 ECC DRAM
165
166Measuring AMD blobs.
167FMAP: area PSPDIR found @ 20000 (524288 bytes)
168tlcl_extend: response is 0
169TPM: Measured PSPDIR into PCR 3
170FMAP: area COREBOOT found @ 194000 (6733824 bytes)
171CBFS: Locating 'bootorder'
172CBFS: 'bootorder' not found.
173file [bootorder] not found in CBFS
174Missing bootorder data.
175Missing or invalid sd3mode knob. Disable SD3.0 mode.
176FMAP: area COREBOOT found @ 194000 (6733824 bytes)
177CBFS: Locating 'bootorder'
178CBFS: 'bootorder' not found.
179file [bootorder] not found in CBFS
180Missing bootorder data.
181Missing or invalid iommu knob, disable IOMMU.
182Root Device scanning...
183setup_bsp_ramtop, TOP MEM: msr.lo = 0xd0000000, msr.hi = 0x00000000
184setup_bsp_ramtop, TOP MEM2: msr.lo = 0x2f000000, msr.hi = 0x00000001
185CPU_CLUSTER: 0 enabled
186DOMAIN: 0000 enabled
187CPU_CLUSTER: 0 scanning...
188CPU: APIC: 00 enabled
189CPU: APIC: 01 enabled
190CPU: APIC: 02 enabled
191CPU: APIC: 03 enabled
192scan_bus: bus CPU_CLUSTER: 0 finished in 4 msecs
193DOMAIN: 0000 scanning...
194PCI: pci_scan_bus for bus 00
195PCI: 00:00.0 [1022/1566] enabled
196PCI: 00:00.2 [1022/1567] enabled
197PCI: 00:02.0 [1022/156b] enabled
198PCI: Static device PCI: 00:02.1 not found, disabling it.
199PCI: 00:02.2 subordinate bus PCI Express
200PCI: 00:02.2 [1022/1439] enabled
201PCI: 00:02.3 subordinate bus PCI Express
202PCI: 00:02.3 [1022/1439] enabled
203PCI: 00:02.4 subordinate bus PCI Express
204PCI: 00:02.4 [1022/1439] enabled
205PCI: 00:02.5 subordinate bus PCI Express
206PCI: 00:02.5 [1022/1439] enabled
207PCI: 00:08.0 [1022/1537] enabled
208hudson_enable()
209PCI: 00:10.0 [1022/7814] enabled
210hudson_enable()
211PCI: 00:11.0 [1022/7800] enabled
212hudson_enable()
213hudson_enable()
214PCI: 00:13.0 [1022/7808] enabled
215hudson_enable()
216PCI: 00:14.0 [1022/780b] enabled
217hudson_enable()
218PCI: 00:14.3 [1022/780e] enabled
219hudson_enable()
220PCI: 00:14.7 [1022/7813] enabled
221hudson_enable()
222PCI: Static device PCI: 00:16.0 not found, disabling it.
223PCI: 00:18.0 [1022/1580] enabled
224PCI: 00:18.1 [1022/1581] enabled
225PCI: 00:18.2 [1022/1582] enabled
226PCI: 00:18.3 [1022/1583] enabled
227PCI: 00:18.4 [1022/1584] enabled
228PCI: 00:18.5 [1022/1585] enabled
229PCI: Leftover static devices:
230PCI: 00:01.0
231PCI: 00:01.1
232PCI: 00:02.1
233PCI: 00:12.0
234PCI: 00:16.0
235PCI: Check your devicetree.cb.
236PCI: 00:02.2 scanning...
237PCI: pci_scan_bus for bus 01
238PCI: 01:00.0 [8086/157b] enabled
239PCIe: Max_Payload_Size adjusted to 512
240Failed to enable LTR for dev = PCI: 01:00.0
241scan_bus: bus PCI: 00:02.2 finished in 6 msecs
242PCI: 00:02.3 scanning...
243PCI: pci_scan_bus for bus 02
244PCI: 02:00.0 [8086/157b] enabled
245PCIe: Max_Payload_Size adjusted to 512
246Failed to enable LTR for dev = PCI: 02:00.0
247scan_bus: bus PCI: 00:02.3 finished in 6 msecs
248PCI: 00:02.4 scanning...
249PCI: pci_scan_bus for bus 03
250PCI: 03:00.0 [8086/157b] enabled
251PCIe: Max_Payload_Size adjusted to 512
252Failed to enable LTR for dev = PCI: 03:00.0
253scan_bus: bus PCI: 00:02.4 finished in 6 msecs
254PCI: 00:02.5 scanning...
255PCI: pci_scan_bus for bus 04
256PCI: 04:00.0 [168c/003c] enabled
257PCIe: Max_Payload_Size adjusted to 256
258Failed to enable LTR for dev = PCI: 04:00.0
259scan_bus: bus PCI: 00:02.5 finished in 6 msecs
260PCI: 00:14.0 scanning...
261scan_bus: bus PCI: 00:14.0 finished in 0 msecs
262PCI: 00:14.3 scanning...
263PNP: 002e.0 disabled
264PNP: 002e.2 enabled
265PNP: 002e.3 enabled
266PNP: 002e.10 disabled
267PNP: 002e.11 disabled
268PNP: 002e.8 disabled
269PNP: 002e.108 enabled
270PNP: 002e.7 enabled
271PNP: 002e.107 enabled
272PNP: 002e.607 disabled
273PNP: 002e.e disabled
274PNP: 002e.f enabled
275PNP: 0c31.0 enabled
276PNP: 002e.14 enabled
277scan_bus: bus PCI: 00:14.3 finished in 13 msecs
278scan_bus: bus DOMAIN: 0000 finished in 116 msecs
279scan_bus: bus Root Device finished in 135 msecs
280done
281BS: BS_DEV_ENUMERATE run times (exec / console): 93 / 215 ms
282Allocating resources...
283Reading resources...
284fx_devs = 0x1
285Adding PCIe enhanced config space BAR 0xf8000000-0xfc000000.
286Done reading resources.
287Setting resources...
288node 0: mmio_basek=00340000, basek=00400000, limitk=004a0000
289PCI: 00:00.2 44 <- [0x00f7e00000 - 0x00f7e7ffff] size 0x00080000 gran 0x13 mem
290PCI: 00:02.2 1c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x0c bus 01 io
291PCI: 00:02.2 24 <- [0x00f7ffffff - 0x00f7fffffe] size 0x00000000 gran 0x14 bus 01 prefmem
292PCI: 00:02.2 20 <- [0x00f7900000 - 0x00f79fffff] size 0x00100000 gran 0x14 bus 01 mem
293PCI: 01:00.0 10 <- [0x00f7900000 - 0x00f791ffff] size 0x00020000 gran 0x11 mem
294PCI: 01:00.0 18 <- [0x0000001000 - 0x000000101f] size 0x00000020 gran 0x05 io
295PCI: 01:00.0 1c <- [0x00f7920000 - 0x00f7923fff] size 0x00004000 gran 0x0e mem
296PCI: 00:02.3 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 02 io
297PCI: 00:02.3 24 <- [0x00f7ffffff - 0x00f7fffffe] size 0x00000000 gran 0x14 bus 02 prefmem
298PCI: 00:02.3 20 <- [0x00f7a00000 - 0x00f7afffff] size 0x00100000 gran 0x14 bus 02 mem
299PCI: 02:00.0 10 <- [0x00f7a00000 - 0x00f7a1ffff] size 0x00020000 gran 0x11 mem
300PCI: 02:00.0 18 <- [0x0000002000 - 0x000000201f] size 0x00000020 gran 0x05 io
301PCI: 02:00.0 1c <- [0x00f7a20000 - 0x00f7a23fff] size 0x00004000 gran 0x0e mem
302PCI: 00:02.4 1c <- [0x0000003000 - 0x0000003fff] size 0x00001000 gran 0x0c bus 03 io
303PCI: 00:02.4 24 <- [0x00f7ffffff - 0x00f7fffffe] size 0x00000000 gran 0x14 bus 03 prefmem
304PCI: 00:02.4 20 <- [0x00f7b00000 - 0x00f7bfffff] size 0x00100000 gran 0x14 bus 03 mem
305PCI: 03:00.0 10 <- [0x00f7b00000 - 0x00f7b1ffff] size 0x00020000 gran 0x11 mem
306PCI: 03:00.0 18 <- [0x0000003000 - 0x000000301f] size 0x00000020 gran 0x05 io
307PCI: 03:00.0 1c <- [0x00f7b20000 - 0x00f7b23fff] size 0x00004000 gran 0x0e mem
308PCI: 00:02.5 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 04 io
309PCI: 00:02.5 24 <- [0x00f7ffffff - 0x00f7fffffe] size 0x00000000 gran 0x14 bus 04 prefmem
310PCI: 00:02.5 20 <- [0x00f7600000 - 0x00f78fffff] size 0x00300000 gran 0x14 bus 04 mem
311PCI: 04:00.0 10 <- [0x00f7600000 - 0x00f77fffff] size 0x00200000 gran 0x15 mem64
312PCI: 04:00.0 30 <- [0x00f7800000 - 0x00f780ffff] size 0x00010000 gran 0x10 romem
313PCI: 00:08.0 10 <- [0x00f7e80000 - 0x00f7e9ffff] size 0x00020000 gran 0x11 prefmem64
314PCI: 00:08.0 18 <- [0x00f7c00000 - 0x00f7cfffff] size 0x00100000 gran 0x14 mem
315PCI: 00:08.0 1c <- [0x00f7ea4000 - 0x00f7ea4fff] size 0x00001000 gran 0x0c mem
316PCI: 00:08.0 20 <- [0x00f7d00000 - 0x00f7dfffff] size 0x00100000 gran 0x14 mem
317PCI: 00:08.0 24 <- [0x00f7ea0000 - 0x00f7ea1fff] size 0x00002000 gran 0x0d mem
318PCI: 00:10.0 10 <- [0x00f7ea2000 - 0x00f7ea3fff] size 0x00002000 gran 0x0d mem64
319PCI: 00:11.0 10 <- [0x0000004010 - 0x0000004017] size 0x00000008 gran 0x03 io
320PCI: 00:11.0 14 <- [0x0000004020 - 0x0000004023] size 0x00000004 gran 0x02 io
321PCI: 00:11.0 18 <- [0x0000004018 - 0x000000401f] size 0x00000008 gran 0x03 io
322PCI: 00:11.0 1c <- [0x0000004024 - 0x0000004027] size 0x00000004 gran 0x02 io
323PCI: 00:11.0 20 <- [0x0000004000 - 0x000000400f] size 0x00000010 gran 0x04 io
324PCI: 00:11.0 24 <- [0x00f7ea5000 - 0x00f7ea53ff] size 0x00000400 gran 0x0a mem
325PCI: 00:13.0 10 <- [0x00f7ea6000 - 0x00f7ea60ff] size 0x00000100 gran 0x08 mem
326PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io
327PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq
328PNP: 002e.3 60 <- [0x00000002f8 - 0x00000002ff] size 0x00000008 gran 0x03 io
329PNP: 002e.3 70 <- [0x0000000003 - 0x0000000003] size 0x00000001 gran 0x00 irq
330PNP: 002e.108 60 <- [0x0000000220 - 0x0000000227] size 0x00000008 gran 0x03 io
331PCI: 00:14.7 10 <- [0x00f7ea7000 - 0x00f7ea70ff] size 0x00000100 gran 0x08 mem64
332Done setting resources.
333Done allocating resources.
334BS: BS_DEV_RESOURCES run times (exec / console): 1 / 169 ms
335
336APIC 00: ** Enter AmdInitMid [00026000]
337AmdInitMid() returned AGESA_SUCCESS
338APIC 00: Heap in SystemMem (4) at 0x10000014
339APIC 00: ** Exit AmdInitMid [00026000]
340PCI_INTR tables: Writing registers C00/C01 for PIC mode PCI IRQ routing:
341 PCI_INTR_INDEX PCI_INTR_DATA
342 0x00 INTA# : 0x03
343 0x01 INTB# : 0x03
344 0x02 INTC# : 0x05
345 0x03 INTD# : 0x07
346 0x04 INTE# : 0x0B
347 0x05 INTF# : 0x0A
348 0x06 INTG# : 0x1F
349 0x07 INTH# : 0x1F
350 0x08 Misc : 0xFA
351 0x09 Misc0 : 0xF1
352 0x0A Misc1 : 0x00
353 0x0B Misc2 : 0x00
354 0x0C Ser IRQ INTA : 0x1F
355 0x0D Ser IRQ INTB : 0x1F
356 0x0E Ser IRQ INTC : 0x1F
357 0x0F Ser IRQ INTD : 0x1F
358 0x10 SCI : 0x1F
359 0x11 SMBUS0 : 0x1F
360 0x12 ASF : 0x1F
361 0x13 HDA : 0x1F
362 0x14 FC : 0x1F
363 0x15 GEC : 0x1F
364 0x16 PerMon : 0x1F
365 0x17 SD : 0x1F
366 0x20 IMC INT0 : 0x1F
367 0x21 IMC INT1 : 0x1F
368 0x22 IMC INT2 : 0x1F
369 0x23 IMC INT3 : 0x1F
370 0x24 IMC INT4 : 0x1F
371 0x25 IMC INT5 : 0x1F
372 0x30 Dev18.0 INTA : 0x05
373 0x31 Dev18.2 INTB : 0x1F
374 0x32 Dev19.0 INTA : 0x05
375 0x33 Dev19.2 INTB : 0x1F
376 0x34 Dev22.0 INTA : 0x04
377 0x35 Dev22.2 INTB : 0x1F
378 0x36 Dev20.5 INTC : 0x1F
379 0x40 RSVD : 0x1F
380 0x41 SATA : 0x1F
381 0x60 RSVD : 0x00
382 0x61 RSVD : 0x00
383 0x62 GPIO : 0x07
384PCI_INTR tables: Writing registers C00/C01 for APIC mode PCI IRQ routing:
385 PCI_INTR_INDEX PCI_INTR_DATA
386 0x00 INTA# : 0x10
387 0x01 INTB# : 0x10
388 0x02 INTC# : 0x12
389 0x03 INTD# : 0x13
390 0x04 INTE# : 0x14
391 0x05 INTF# : 0x15
392 0x06 INTG# : 0x1F
393 0x07 INTH# : 0x1F
394 0x08 Misc : 0x00
395 0x09 Misc0 : 0x00
396 0x0A Misc1 : 0x00
397 0x0B Misc2 : 0x00
398 0x0C Ser IRQ INTA : 0x1F
399 0x0D Ser IRQ INTB : 0x1F
400 0x0E Ser IRQ INTC : 0x1F
401 0x0F Ser IRQ INTD : 0x1F
402 0x10 SCI : 0x09
403 0x11 SMBUS0 : 0x1F
404 0x12 ASF : 0x1F
405 0x13 HDA : 0x1F
406 0x14 FC : 0x1F
407 0x15 GEC : 0x1F
408 0x16 PerMon : 0x1F
409 0x17 SD : 0x10
410 0x20 IMC INT0 : 0x05
411 0x21 IMC INT1 : 0x1F
412 0x22 IMC INT2 : 0x1F
413 0x23 IMC INT3 : 0x1F
414 0x24 IMC INT4 : 0x1F
415 0x25 IMC INT5 : 0x1F
416 0x30 Dev18.0 INTA : 0x12
417 0x31 Dev18.2 INTB : 0x1F
418 0x32 Dev19.0 INTA : 0x12
419 0x33 Dev19.2 INTB : 0x1F
420 0x34 Dev22.0 INTA : 0x12
421 0x35 Dev22.2 INTB : 0x1F
422 0x36 Dev20.5 INTC : 0x1F
423 0x40 RSVD : 0x1F
424 0x41 SATA : 0x13
425 0x60 RSVD : 0x00
426 0x61 RSVD : 0x00
427 0x62 GPIO : 0x07
428PCI_CFG IRQ: Write PCI config space IRQ assignments
429PCI_CFG IRQ: Finished writing PCI config space IRQ assignments
430BS: BS_DEV_ENABLE entry times (exec / console): 23 / 105 ms
431Enabling resources...
432PCI: 00:00.0 cmd <- 04
433PCI: 00:00.2 subsystem <- 1022/1410
434PCI: 00:00.2 cmd <- 06
435PCI: 00:02.0 subsystem <- 1022/1410
436PCI: 00:02.0 cmd <- 00
437PCI: 00:02.2 bridge ctrl <- 0013
438PCI: 00:02.2 cmd <- 07
439PCI: 00:02.3 bridge ctrl <- 0013
440PCI: 00:02.3 cmd <- 07
441PCI: 00:02.4 bridge ctrl <- 0013
442PCI: 00:02.4 cmd <- 07
443PCI: 00:02.5 bridge ctrl <- 0013
444PCI: 00:02.5 cmd <- 06
445PCI: 00:08.0 subsystem <- 1022/1410
446PCI: 00:08.0 cmd <- 02
447PCI: 00:10.0 subsystem <- 1022/1410
448PCI: 00:10.0 cmd <- 02
449PCI: 00:11.0 cmd <- 07
450PCI: 00:13.0 subsystem <- 1022/1410
451PCI: 00:13.0 cmd <- 02
452PCI: 00:14.0 subsystem <- 1022/1410
453PCI: 00:14.0 cmd <- 403
454PCI: 00:14.3 subsystem <- 1022/1410
455PCI: 00:14.3 cmd <- 0f
456hudson lpc decode:PNP: 002e.2, base=0x000003f8, end=0x000003ff
457hudson lpc decode:PNP: 002e.3, base=0x000002f8, end=0x000002ff
458hudson lpc decode:PNP: 002e.108, base=0x00000220, end=0x00000227
459PCI: 00:14.7 cmd <- 06
460PCI: 00:18.0 subsystem <- 1022/1410
461PCI: 00:18.0 cmd <- 00
462PCI: 00:18.1 subsystem <- 1022/1410
463PCI: 00:18.1 cmd <- 00
464PCI: 00:18.2 subsystem <- 1022/1410
465PCI: 00:18.2 cmd <- 00
466PCI: 00:18.3 subsystem <- 1022/1410
467PCI: 00:18.3 cmd <- 00
468PCI: 00:18.4 subsystem <- 1022/1410
469PCI: 00:18.4 cmd <- 00
470PCI: 00:18.5 subsystem <- 1022/1410
471PCI: 00:18.5 cmd <- 00
472PCI: 01:00.0 cmd <- 03
473PCI: 02:00.0 cmd <- 03
474PCI: 03:00.0 cmd <- 03
475PCI: 04:00.0 cmd <- 02
476done.
477BS: BS_DEV_ENABLE run times (exec / console): 0 / 62 ms
478Initializing devices...
479Root Device init
480Root Device init finished in 0 msecs
481CPU_CLUSTER: 0 init
482start_eip=0x00001000, code_size=0x00000031
483Initializing CPU #0
484CPU: vendor AMD device 730f01
485CPU: family 16, model 30, stepping 01
486Model 16 Init.
487
488MTRR check
489Fixed MTRRs : Enabled
490Variable MTRRs: Enabled
491
492Enabling cache
493Setting up local APIC...
494 apic_id: 0x00 done.
495siblings = 03, FMAP: area COREBOOT found @ 194000 (6733824 bytes)
496CBFS: Locating 'cpu_microcode_blob.bin'
497CBFS: 'cpu_microcode_blob.bin' not found.
498cpu_microcode_blob.bin not found. Skipping updates.
499CPU #0 initialized
500Initializing CPU #1
501CPU: vendor AMD device 730f01
502CPU: family 16, model 30, stepping 01
503Model 16 Init.
504
505MTRR check
506Fixed MTRRs : Enabled
507Variable MTRRs: Enabled
508
509Enabling cache
510Setting up local APIC...
511 apic_id: 0x01 done.
512siblings = 03, FMAP: area COREBOOT found @ 194000 (6733824 bytes)
513CBFS: Locating 'cpu_microcode_blob.bin'
514CBFS: 'cpu_microcode_blob.bin' not found.
515cpu_microcode_blob.bin not found. Skipping updates.
516CPU #1 initialized
517Initializing CPU #2
518CPU: vendor AMD device 730f01
519CPU: family 16, model 30, stepping 01
520Model 16 Init.
521
522MTRR check
523Fixed MTRRs : Enabled
524Variable MTRRs: Enabled
525
526Enabling cache
527Setting up local APIC...
528 apic_id: 0x02 done.
529siblings = 03, FMAP: area COREBOOT found @ 194000 (6733824 bytes)
530CBFS: Locating 'cpu_microcode_blob.bin'
531CBFS: 'cpu_microcode_blob.bin' not found.
532cpu_microcode_blob.bin not found. Skipping updates.
533CPU #2 initialized
534Initializing CPU #3
535Waiting for 1 CPUS to stop
536CPU: vendor AMD device 730f01
537CPU: family 16, model 30, stepping 01
538Model 16 Init.
539
540MTRR check
541Fixed MTRRs : Enabled
542Variable MTRRs: Enabled
543
544Enabling cache
545Setting up local APIC...
546 apic_id: 0x03 done.
547siblings = 03, FMAP: area COREBOOT found @ 194000 (6733824 bytes)
548CBFS: Locating 'cpu_microcode_blob.bin'
549CBFS: 'cpu_microcode_blob.bin' not found.
550cpu_microcode_blob.bin not found. Skipping updates.
551CPU #3 initialized
552All AP CPUs stopped (1925 loops)
553CPU_CLUSTER: 0 init finished in 121 msecs
554PCI: 00:00.0 init
555PCI: 00:00.0 init finished in 0 msecs
556PCI: 00:02.0 init
557PCI: 00:02.0 init finished in 0 msecs
558PCI: 00:08.0 init
559PCI: 00:08.0 init finished in 0 msecs
560PCI: 00:10.0 init
561PCI: 00:10.0 init finished in 0 msecs
562PCI: 00:11.0 init
563PCI: 00:11.0 init finished in 0 msecs
564PCI: 00:13.0 init
565PCI: 00:13.0 init finished in 0 msecs
566PCI: 00:14.0 init
567IOAPIC: Initializing IOAPIC at 0xfec00000
568IOAPIC: Bootstrap Processor Local APIC = 0x00
569IOAPIC: ID = 0x04
570IOAPIC: 24 interrupts
571IOAPIC: Enabling interrupts on FSB
572PCI: 00:14.0 init finished in 7 msecs
573PCI: 00:14.3 init
574RTC Init
575PCI: 00:14.3 init finished in 0 msecs
576PCI: 00:14.7 init
577PCI: 00:14.7 init finished in 0 msecs
578PCI: 00:18.0 init
579PCI: 00:18.0 init finished in 0 msecs
580PCI: 00:18.1 init
581PCI: 00:18.1 init finished in 0 msecs
582PCI: 00:18.2 init
583PCI: 00:18.2 init finished in 0 msecs
584PCI: 00:18.3 init
585PCI: 00:18.3 init finished in 0 msecs
586PCI: 00:18.4 init
587PCI: 00:18.4 init finished in 0 msecs
588PCI: 00:18.5 init
589PCI: 00:18.5 init finished in 0 msecs
590PCI: 01:00.0 init
591PCI: 01:00.0 init finished in 0 msecs
592PCI: 02:00.0 init
593PCI: 02:00.0 init finished in 0 msecs
594PCI: 03:00.0 init
595PCI: 03:00.0 init finished in 0 msecs
596PCI: 04:00.0 init
597PCI: 04:00.0 init finished in 0 msecs
598PNP: 002e.2 init
599PNP: 002e.2 init finished in 0 msecs
600PNP: 002e.3 init
601PNP: 002e.3 init finished in 0 msecs
602PNP: 002e.108 init
603PNP: 002e.108 init finished in 0 msecs
604PNP: 002e.7 init
605PNP: 002e.7 init finished in 0 msecs
606PNP: 002e.107 init
607PNP: 002e.107 init finished in 0 msecs
608PNP: 002e.f init
609PNP: 002e.f init finished in 0 msecs
610PNP: 002e.14 init
611PNP: 002e.14 init finished in 0 msecs
612Devices initialized
613BS: BS_DEV_INIT run times (exec / console): 98 / 105 ms
614Finalize devices...
615PCI: 00:14.3 final
616Devices finalized
617BS: BS_POST_DEVICE run times (exec / console): 0 / 3 ms
618
619APIC 00: ** Enter AmdInitLate [00025000]
620AmdInitLate() returned AGESA_UNSUPPORTED
621
622EventLog: EventClass = 2, EventInfo = 8040100.
623 Param1 = 1243000, Param2 = 0.
624 Param3 = 0, Param4 = 0.
625
626EventLog: EventClass = 2, EventInfo = 8040100.
627 Param1 = 1244000, Param2 = 0.
628 Param3 = 0, Param4 = 0.
629
630EventLog: EventClass = 2, EventInfo = 8040100.
631 Param1 = 1245000, Param2 = 0.
632 Param3 = 0, Param4 = 0.
633
634EventLog: EventClass = 2, EventInfo = 8040100.
635 Param1 = 1246000, Param2 = 0.
636 Param3 = 0, Param4 = 0.
637
638EventLog: EventClass = 2, EventInfo = 8040100.
639 Param1 = 1247000, Param2 = 0.
640 Param3 = 0, Param4 = 0.
641
642EventLog: EventClass = 2, EventInfo = 8040100.
643 Param1 = 1248000, Param2 = 0.
644 Param3 = 0, Param4 = 0.
645
646EventLog: EventClass = 2, EventInfo = 8040100.
647 Param1 = 1249000, Param2 = 0.
648 Param3 = 0, Param4 = 0.
649
650EventLog: EventClass = 2, EventInfo = 8040100.
651 Param1 = 124a000, Param2 = 0.
652 Param3 = 0, Param4 = 0.
653
654EventLog: EventClass = 2, EventInfo = 8040100.
655 Param1 = 124c000, Param2 = 0.
656 Param3 = 0, Param4 = 0.
657
658EventLog: EventClass = 2, EventInfo = 8040100.
659 Param1 = 1180000, Param2 = 0.
660 Param3 = 0, Param4 = 0.
661
662EventLog: EventClass = 2, EventInfo = 8040100.
663 Param1 = 1080000, Param2 = 0.
664 Param3 = 0, Param4 = 0.
665
666EventLog: EventClass = 2, EventInfo = 8040100.
667 Param1 = 1040000, Param2 = 0.
668 Param3 = 0, Param4 = 0.
669
670EventLog: EventClass = 2, EventInfo = 8040100.
671 Param1 = a008, Param2 = 0.
672 Param3 = 0, Param4 = 0.
673
674EventLog: EventClass = 2, EventInfo = 8040100.
675 Param1 = a00f, Param2 = 0.
676 Param3 = 0, Param4 = 0.
677
678EventLog: EventClass = 2, EventInfo = 8040100.
679 Param1 = a00e, Param2 = 0.
680 Param3 = 0, Param4 = 0.
681
682EventLog: EventClass = 2, EventInfo = 8040100.
683 Param1 = a010, Param2 = 0.
684 Param3 = 0, Param4 = 0.
685APIC 00: Heap in SystemMem (4) at 0x10000014
686APIC 00: ** Exit AmdInitLate [00025000]
687BS: BS_POST_DEVICE exit times (exec / console): 9 / 84 ms
688Writing IRQ routing tables to 0xf0000...write_pirq_routing_table done.
689Writing IRQ routing tables to 0xcfea7000...write_pirq_routing_table done.
690PIRQ table: 48 bytes.
691Wrote the mp table end at: 0x000f0410 - 0x000f060c
692Wrote the mp table end at: 0xcfea6010 - 0xcfea620c
693MP table: 524 bytes.
694FMAP: area COREBOOT found @ 194000 (6733824 bytes)
695CBFS: Locating 'fallback/dsdt.aml'
696CBFS: Found @ offset 286c0 size 1af6
697FMAP: area COREBOOT found @ 194000 (6733824 bytes)
698tlcl_extend: response is 0
699TPM: Measured FMAP: COREBOOT CBFS: fallback/dsdt.aml into PCR 2
700FMAP: area COREBOOT found @ 194000 (6733824 bytes)
701CBFS: Locating 'fallback/slic'
702CBFS: 'fallback/slic' not found.
703ACPI: Writing ACPI tables at cfe82000.
704ACPI: * FACS
705ACPI: * DSDT
706ACPI: * FADT
707pm_base: 0x0800
708ACPI: added table 1/32, length now 40
709ACPI: * SSDT
710\_SB.PCI0.LIBR.TPM.TPM: LPC TPM PNP: 0c31.0
711ACPI: added table 2/32, length now 44
712ACPI: * MCFG
713ACPI: added table 3/32, length now 48
714ACPI: * TPM2
715TPM2 log created at 0xcfe72000
716ACPI: added table 4/32, length now 52
717ACPI: * MADT
718ACPI: added table 5/32, length now 56
719current = cfe84180
720ACPI: added table 6/32, length now 60
721FMAP: area COREBOOT found @ 194000 (6733824 bytes)
722CBFS: Locating 'bootorder'
723CBFS: 'bootorder' not found.
724file [bootorder] not found in CBFS
725Missing bootorder data.
726Missing or invalid iommu knob, disable IOMMU.
727ACPI: * IVRS at cfe84350
7280xcfe84350: 49 56 52 53 d0 00 00 00 01 c3 43 4f 52 45 76 34 IVRS......COREv4
7290xcfe84360: 43 4f 52 45 42 4f 4f 54 00 00 00 00 43 4f 52 45 COREBOOT....CORE
7300xcfe84370: 31 05 18 20 41 30 20 00 00 00 00 00 00 00 00 00 1.. A0 .........
7310xcfe84380: 10 fe 48 00 02 00 40 00 00 00 e0 f7 00 00 00 00 ..H...@.........
7320xcfe84390: 00 00 00 13 24 88 04 00 03 08 00 00 04 ff 00 00 ....$...........
7330xcfe843a0: 02 00 01 00 02 00 02 00 02 00 03 00 02 00 04 00 ................
7340xcfe843b0: 48 00 00 00 00 a0 00 02 48 00 00 d7 04 a0 00 01 H.......H.......
7350xcfe843c0: 48 00 00 00 05 01 00 01 11 3e 58 00 02 00 40 00 H........>X...@.
7360xcfe843d0: 00 00 e0 f7 00 00 00 00 00 00 00 13 00 80 04 00 ................
7370xcfe843e0: d2 0a 29 00 08 00 00 00 00 00 00 00 00 00 00 00 ..).............
7380xcfe843f0: 03 08 00 00 04 ff 00 00 02 00 01 00 02 00 02 00 ................
7390xcfe84400: 02 00 03 00 02 00 04 00 48 00 00 00 00 a0 00 02 ........H.......
7400xcfe84410: 48 00 00 d7 04 a0 00 01 48 00 00 00 05 01 00 01 H.......H.......
741ACPI: added table 7/32, length now 64
742ACPI: * SRAT at cfe84420
743 AGESA SRAT table NULL. Skipping.
744ACPI: * SLIT at cfe84420
745 AGESA SLIT table NULL. Skipping.
746ACPI: * AGESA ALIB SSDT at cfe84420
747ACPI: added table 8/32, length now 68
748ACPI: * SSDT at cfe88cd0
749ACPI: added table 9/32, length now 72
750ACPI: * SSDT for PState at cfe89498
751ACPI: * HPET
752ACPI: added table 10/32, length now 76
753ACPI: done.
754ACPI tables: 29920 bytes.
755smbios_write_tables: cfe71000
756Manufacturer: ef
757SF: Detected W25Q64_V with sector size 0x1000, total 0x800000
758Root Device (PC Engines apu2)
759SMBIOS tables: 547 bytes.
760Writing table forward entry at 0x00000500
761Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum aff3
762Writing coreboot table at 0xcfea8000
763 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
764 1. 0000000000001000-000000000009ffff: RAM
765 2. 00000000000c0000-00000000cfe70fff: RAM
766 3. 00000000cfe71000-00000000cfeb0fff: CONFIGURATION TABLES
767 4. 00000000cfeb1000-00000000cffa1fff: RAMSTAGE
768 5. 00000000cffa2000-00000000cfffffff: CONFIGURATION TABLES
769 6. 00000000f8000000-00000000fbffffff: RESERVED
770 7. 00000000fed40000-00000000fed44fff: RESERVED
771 8. 0000000100000000-000000012effffff: RAM
772FMAP: area COREBOOT found @ 194000 (6733824 bytes)
773Wrote coreboot table at: 0xcfea8000, 0x360 bytes, checksum 958f
774coreboot table: 888 bytes.
775IMD ROOT 0. 0xcffff000 0x00001000
776IMD SMALL 1. 0xcfffe000 0x00001000
777CONSOLE 2. 0xcffde000 0x00020000
778TIME STAMP 3. 0xcffdd000 0x00000910
779TCPA LOG 4. 0xcffdb000 0x000019cc
780VBOOT WORK 5. 0xcffc7000 0x00014000
781ROMSTG STCK 6. 0xcffaf000 0x00018000
782AFTER CAR 7. 0xcffa2000 0x0000d000
783RAMSTAGE 8. 0xcfeb0000 0x000f2000
784COREBOOT 9. 0xcfea8000 0x00008000
785IRQ TABLE 10. 0xcfea7000 0x00001000
786SMP TABLE 11. 0xcfea6000 0x00001000
787ACPI 12. 0xcfe82000 0x00024000
788TPM2 TCGLOG13. 0xcfe72000 0x00010000
789SMBIOS 14. 0xcfe71000 0x00000800
790IMD small region:
791 IMD ROOT 0. 0xcfffec00 0x00000400
792 FMAP 1. 0xcfffe9c0 0x00000230
793 ROMSTAGE 2. 0xcfffe9a0 0x00000004
794FMAP: area COREBOOT found @ 194000 (6733824 bytes)
795CBFS: Locating 'bootorder'
796CBFS: 'bootorder' not found.
797file [bootorder] not found in CBFS
798Missing bootorder data.
799Missing or invalid scon knob, enable console.
800BS: BS_WRITE_TABLES run times (exec / console): 4 / 216 ms
801FMAP: area COREBOOT found @ 194000 (6733824 bytes)
802CBFS: Locating 'fallback/payload'
803CBFS: Found @ offset 2a200 size 6ec14
804FMAP: area COREBOOT found @ 194000 (6733824 bytes)
805tlcl_extend: response is 0
806TPM: Measured FMAP: COREBOOT CBFS: fallback/payload into PCR 2
807Checking segment from ROM address 0xff9be238
808Checking segment from ROM address 0xff9be254
809Checking segment from ROM address 0xff9be270
810Loading segment from ROM address 0xff9be238
811 code (compression=1)
812 New segment dstaddr 0x00009000 memsize 0x1ba78 srcaddr 0xff9be28c filesize 0x9a98
813Loading Segment: addr: 0x00009000 memsz: 0x000000000001ba78 filesz: 0x0000000000009a98
814using LZMA
815Clearing Segment: addr: 0x000000000001d057 memsz: 0x0000000000007a21
816Loading segment from ROM address 0xff9be254
817 code (compression=1)
818 New segment dstaddr 0x00100000 memsize 0x14088c srcaddr 0xff9c7d24 filesize 0x65128
819Loading Segment: addr: 0x00100000 memsz: 0x000000000014088c filesz: 0x0000000000065128
820using LZMA
821Loading segment from ROM address 0xff9be270
822 Entry Point 0x00009000
823BS: BS_PAYLOAD_LOAD run times (exec / console): 242 / 47 ms
824coreboot TCPA measurements:
825
826 PCR-2 351c9be881dd1422c36faa4b71878b7023ea456b0a08830099ad6d85ab5b062b SHA256 [FMAP: COREBOOT CBFS: bootblock]
827 PCR-2 a3abbe64f3567608f3cde3ac11874a1f8dc03d85ceee4320c6a09d3eb1554213 SHA256 [FMAP: COREBOOT CBFS: fallback/romstage]
828 PCR-0 62571891215b4efc1ceab744ce59dd0b66ea6f73 SHA256 [VBOOT: boot mode]
829 PCR-1 45d09c9e1a576539a90797dd63e04b9b7a8dc0a624adf36e20145352aad19d78 SHA256 [VBOOT: GBB HWID]
830 PCR-2 de47feccf6dfbe1852d4d26aedf1c1afbe27248d59a78fcc15af6f1124684c9b SHA256 [FMAP: COREBOOT CBFS: fallback/postcar]
831 PCR-2 a9cc8664605c0bfb3e363e57bbb9a704ebd5eb47587138804bb1e7f076597aed SHA256 [FMAP: COREBOOT CBFS: fallback/ramstage]
832 PCR-2 1f58561c980dd7c6d3c3cb6a845894cf674dc754b9215b54b85057b25ed3c1ea SHA256 [FMAP: COREBOOT CBFS: AGESA]
833 PCR-2 6c1d20616d91442b61de89de6bf81f0ee8e929919c9284061e00d004de893994 SHA256 [FMAP: COREBOOT CBFS: spd.bin]
834 PCR-3 279fbaf89d5fe618e8997ec8fa2be380edadb31b1f8a11e94240150447302f56 SHA256 [PSPDIR]
835 PCR-2 db0e5ecef198e81547d8c3551a3465f0813a673c13e34fd50cf38225316c13a7 SHA256 [FMAP: COREBOOT CBFS: fallback/dsdt.aml]
836 PCR-2 c55fd348737986d6266c9cfcf791e0e8da069ce276570c98e7bab3234c136b25 SHA256 [FMAP: COREBOOT CBFS: fallback/payload]
837
838BS: BS_PAYLOAD_BOOT entry times (exec / console): 0 / 58 ms
839Jumping to boot code at 0x00009000(0xcfea8000)
840loader/i386/linux.c:214: prot_mode_mem = 0x100000, prot_mode_target = 100000,
841prot_size = f54000
842loader/i386/linux.c:872: bzImage, setup=0x3e00, size=0xf54000
843loader/i386/linux.c:1127: Initrd, addr=0x37f1f000, size=0xcf556
844grub_cmd_slaunch:122: check for manufacturer
845grub_cmd_slaunch:126: check for cpuid
846grub_cmd_slaunch:136: set slaunch
847grub_cmd_slaunch_module:156: check argc
848grub_cmd_slaunch_module:161: check relocator
849grub_cmd_slaunch_module:170: open file
850grub_cmd_slaunch_module:175: get size
851grub_cmd_slaunch_module:180: allocate memory
852grub_cmd_slaunch_module:192: addr: 0x1060000
853grub_cmd_slaunch_module:194: target: 0x1060000
854grub_cmd_slaunch_module:196: add module
855grub_cmd_slaunch_module:205: read file
856grub_cmd_slaunch_module:215: close file
857loader/i386/linux.c:540: real_size = 5000, mmap_size = 2000
858loader/i386/linux.c:390: addr = 10000, size = 80000, need_size = 5000
859loader/i386/linux.c:552: real_mode_target = 8b000, real_size = 5000,
860efi_mmap_size = 0
861loader/i386/linux.c:569: real_mode_mem = 0xcfb892c0
862loader/i386/linux.c:579: code32_start = 100000
863grub_slaunch_boot_skinit:41: real_mode_target: 0x8b000
864grub_slaunch_boot_skinit:42: prot_mode_target: 0x100000
865grub_slaunch_boot_skinit:43: params: 0xcfb892c0
866loader/i386/slaunch_skinit.c:52: Invoke SKINIT
867sl_stub_entry_offset:
8680x00000000002b92e8: 10 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
8690x00000000002b92f8: 23 02 00 00 00 00 00 00 00 00 00 00 66 66 2e 0f #...........ff..
8700x00000000002b9308: 1f 84 00 00 00 00 00 90 fa fc 8d a5 34 fb 1b 00 ............4...
8710x00000000002b9318: 01 ad e2 ca 1b 00 0f 01 95 e0 ca 1b 00 b8 10 00 ................
8720x00000000002b9328: 00 00 8e d8 8e c0 8e e0 8e e8 8e d0 8d 85 3e 93 ..............>.
8730x00000000002b9338: 1b 00 6a 08 50 cb b9 1b 00 00 00 0f 32 a9 00 01 ..j.P.......2...
8740x00000000002b9348: 00 00 75 02 0f 0b bf 01 00 00 00 31 c0 0f a2 81 ..u........1....
8750x00000000002b9358: fb 47 65 6e 75 0f 85 82 00 00 00 81 fa 69 6e 65 .Genu........ine
8760x00000000002b9368: 49 75 7a 81 f9 6e 74 65 6c 75 72 bf 02 00 00 00 Iuz..ntelur.....
8770x00000000002b9378: c7 85 20 cb 1b 00 02 00 00 00 ff 85 2c cb 1b 00 .. .........,...
8780x00000000002b9388: 31 db b8 07 00 00 00 0f 37 8d 85 9c 93 1b 00 9c 1.......7.......
8790x00000000002b9398: 6a 08 50 cf c7 05 30 00 d2 fe 00 00 00 00 c7 05 j.P...0.........
8800x00000000002b93a8: 08 00 d2 fe ff ff ff ff a1 00 03 d2 fe 8b 08 8d ................
8810x00000000002b93b8: 44 08 08 8b 70 04 89 a8 34 02 00 00 8b b8 3c 02 D...p...4.....<.
8820x00000000002b93c8: 00 00 89 bd 30 cb 1b 00 50 56 e8 e9 00 00 00 5e ....0...PV.....^
8830x00000000002b93d8: e8 c3 01 00 00 5f e8 5d 01 00 00 eb 0e c7 85 20 ....._.].......
884shasum calculated:
8850x0000000001064b20: e6 31 a1 33 8d ec b7 52 1c 59 9e 96 eb 83 6e 75 .1.3...R.Y....nu
8860x0000000001064b30: 98 90 b4 24 a3 8c 3e 35 a3 4a 39 c8 0b 3d 7b d0 ...$..>5.J9..={.
887PCR extended
888pm_kernel_entry:
8890x0000000000100110: 8d ab f0 fe ff ff e9 f5 91 1b 00 00 00 00 00 00 ................
8900x0000000000100120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
891...
8920x0000000000100200: 31 c0 8e d8 8e c0 8e d0 8e e0 8e e8 48 c7 c5 00 1...........H...
893zero_page:
8940x000000000008b000: 00 13 00 80 00 00 03 50 00 00 00 00 00 00 19 01 .......P........
8950x000000000008b010: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
8960x000000000008b020: 3f a3 00 10 00 00 00 00 00 00 00 00 00 00 00 00 ?...............
8970x000000000008b030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
898...
8990x000000000008b0d0: 00 00 00 00 00 00 00 00 00 d0 06 01 00 00 00 00 ................
9000x000000000008b0e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
901...
902lz_base:
9030x0000000001060000: d4 01 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 ................
9040x0000000001060010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
905...
9060x0000000001060080: 00 00 00 00 00 00 00 00 13 3a 06 01 00 00 00 00 .........:......
9070x0000000001060090: c0 00 06 01 00 00 00 00 07 1d 65 9b 0e 6b 00 df ..........e..k..
9080x00000000010600a0: 38 01 06 01 00 00 00 00 68 01 06 01 00 00 00 00 8.......h.......
9090x00000000010600b0: 40 01 06 01 00 00 00 00 08 00 00 00 c8 ff ff ff @...............
9100x00000000010600c0: 09 78 fc cc 39 df 88 f4 0c a8 23 57 af 41 3b 79 .x..9.....#W.A;y
9110x00000000010600d0: 6e a9 b6 4e 2e 69 fb d0 9f d7 66 80 39 d3 8d 85 n..N.i....f.9...
9120x00000000010600e0: 79 a2 91 f1 d4 d2 23 72 bd 82 3e e6 76 92 04 80 y.....#r..>.v...
9130x00000000010600f0: ee 54 b6 64 ab c4 c3 79 72 47 90 eb e2 75 48 cd .T.d...yrG...uH.
9140x0000000000000126: 0x0000000000000122: 0x0000000000000022: 0x0000000000000000: early console in extract_kernel
915input_data: 0x0000000001d762c8
916input_len: 0x00000000001b3fe7
917output: 0x0000000001000000
918output_len: 0x0000000000f0a790
919kernel_total_size: 0x0000000000c16000
920trampoline_32bit: 0x000000000009d000
921
922Decompressing Linux... Parsing ELF... done.
923Booting the kernel.
924Linux version 5.1.0+ (coreboot@653ce3dd2a75) (gcc version 7.3.0 (Debian 7.3.0-25)) #1 SMP Tue Feb 25 12:24:17 UTC 2020
925Command line: BOOT_IMAGE=(cbfsdisk)/bzImage console=ttyS0,115200 earlyprintk=serial,ttyS0,115200
926x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
927x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
928x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
929x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
930x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
931BIOS-provided physical RAM map:
932BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
933BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
934BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
935BIOS-e820: [mem 0x0000000000100000-0x00000000cfe70fff] usable
936BIOS-e820: [mem 0x00000000cfe71000-0x00000000cfffffff] type 16
937BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
938BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
939BIOS-e820: [mem 0x0000000100000000-0x000000012effffff] usable
940printk: bootconsole [earlyser0] enabled
941NX (Execute Disable) protection: active
942tsc: Fast TSC calibration using PIT
943tsc: Detected 998.113 MHz processor
944e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
945e820: remove [mem 0x000a0000-0x000fffff] usable
946last_pfn = 0x12f000 max_arch_pfn = 0x400000000
947x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
948last_pfn = 0xcfe71 max_arch_pfn = 0x400000000
949found SMP MP-table at [mem 0x000f0400-0x000f040f]
950Using GB pages for direct mapping
951BRK [0x01c00000, 0x01c00fff] PGTABLE
952BRK [0x01c01000, 0x01c01fff] PGTABLE
953BRK [0x01c02000, 0x01c02fff] PGTABLE
954BRK [0x01c03000, 0x01c03fff] PGTABLE
955RAMDISK: [mem 0x37e4f000-0x37f1efff]
956ACPI: Early table checksum verification disabled
957ACPI: RSDP 0x00000000000F0800 000024 (v02 COREv4)
958ACPI: XSDT 0x00000000CFE820E0 000074 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
959ACPI: FACP 0x00000000CFE83D80 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20180531)
960ACPI: DSDT 0x00000000CFE82280 001AF6 (v02 COREv4 COREBOOT 00010001 INTL 20180531)
961ACPI: FACS 0x00000000CFE82240 000040
962ACPI: SSDT 0x00000000CFE83E80 0001E5 (v02 COREv4 COREBOOT 0000002A CORE 20180531)
963ACPI: MCFG 0x00000000CFE84070 00003C (v01 COREv4 COREBOOT 00000000 CORE 20180531)
964ACPI: TPM2 0x00000000CFE840B0 00004C (v04 COREv4 COREBOOT 00000000 CORE 20180531)
965ACPI: APIC 0x00000000CFE84100 00007E (v02 COREv4 COREBOOT 00000000 CORE 20180531)
966ACPI: HEST 0x00000000CFE84180 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
967ACPI: IVRS 0x00000000CFE84350 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
968ACPI: SSDT 0x00000000CFE84420 0048A6 (v02 AMD AGESA 00000002 MSFT 04000000)
969ACPI: SSDT 0x00000000CFE88CD0 0007C8 (v01 AMD AGESA 00000001 AMD 00000001)
970ACPI: HPET 0x00000000CFE894A0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
971ACPI: Local APIC address 0xfee00000
972Zone ranges:
973 DMA32 [mem 0x0000000000001000-0x00000000ffffffff]
974 Normal [mem 0x0000000100000000-0x000000012effffff]
975Movable zone start for each node
976Early memory node ranges
977 node 0: [mem 0x0000000000001000-0x000000000009ffff]
978 node 0: [mem 0x0000000000100000-0x00000000cfe70fff]
979 node 0: [mem 0x0000000100000000-0x000000012effffff]
980Zeroed struct page in unavailable ranges: 496 pages
981Initmem setup node 0 [mem 0x0000000000001000-0x000000012effffff]
982On node 0 totalpages: 1043984
983 DMA32 zone: 13305 pages used for memmap
984 DMA32 zone: 22 pages reserved
985 DMA32 zone: 851472 pages, LIFO batch:63
986 Normal zone: 3008 pages used for memmap
987 Normal zone: 192512 pages, LIFO batch:63
988ACPI: PM-Timer IO Port: 0x818
989ACPI: Local APIC address 0xfee00000
990ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
991IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
992IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
993ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
994ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
995ACPI: IRQ0 used by override.
996ACPI: IRQ9 used by override.
997Using ACPI (MADT) for SMP configuration information
998ACPI: HPET id: 0x10228201 base: 0xfed00000
999smpboot: Allowing 4 CPUs, 0 hotplug CPUs
1000[mem 0xd0000000-0xf7ffffff] available for PCI devices
1001clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
1002setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
1003percpu: Embedded 37 pages/cpu s122520 r0 d29032 u524288
1004pcpu-alloc: s122520 r0 d29032 u524288 alloc=1*2097152
1005pcpu-alloc: [0] 0 1 2 3
1006Built 1 zonelists, mobility grouping on. Total pages: 1027649
1007Kernel command line: console=ttyS0,115200 earlyprintk=serial,ttyS0,115200 BOOT_IMAGE=(cbfsdisk)/bzImage console=ttyS0,115200 earlyprintk=serial,ttyS0,115200
1008Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
1009Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
1010Memory: 4024424K/4175936K available (6145K kernel code, 359K rwdata, 628K rodata, 688K init, 984K bss, 151512K reserved, 0K cma-reserved)
1011rcu: Hierarchical RCU implementation.
1012rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
1013rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
1014rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
1015NR_IRQS: 4352, nr_irqs: 104, preallocated irqs: 16
1016Console: colour dummy device 80x25
1017printk: console [ttyS0] enabled
1018printk: console [ttyS0] enabled
1019printk: bootconsole [earlyser0] disabled
1020printk: bootconsole [earlyser0] disabled
1021ACPI: Core revision 20190215
1022clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
1023hpet clockevent registered
1024APIC: Switch to symmetric I/O mode setup
1025..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
1026clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cc64118139, max_idle_ns: 881590482826 ns
1027Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.22 BogoMIPS (lpj=3992452)
1028pid_max: default: 4096 minimum: 301
1029Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
1030Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
1031*** VALIDATE proc ***
1032*** VALIDATE cgroup1 ***
1033*** VALIDATE cgroup2 ***
1034Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
1035Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
1036Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available!
1037Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
1038Freeing SMP alternatives memory: 12K
1039smpboot: CPU0: AMD GX-412TC SOC (family: 0x16, model: 0x30, stepping: 0x1)
1040Performance Events: AMD PMU driver.
1041... version: 0
1042... bit width: 48
1043... generic registers: 4
1044... value mask: 0000ffffffffffff
1045... max period: 00007fffffffffff
1046... fixed-purpose events: 0
1047... event mask: 000000000000000f
1048rcu: Hierarchical SRCU implementation.
1049smp: Bringing up secondary CPUs ...
1050x86: Booting SMP configuration:
1051.... node #0, CPUs: #1 #2 #3
1052smp: Brought up 1 node, 4 CPUs
1053smpboot: Max logical packages: 1
1054smpboot: Total of 4 processors activated (7984.90 BogoMIPS)
1055devtmpfs: initialized
1056clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
1057futex hash table entries: 16 (order: -2, 1024 bytes)
1058cpuidle: using governor ladder
1059ACPI: bus type PCI registered
1060PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xf8000000-0xfc0fffff] (base 0xf8000000)
1061PCI: MMCONFIG at [mem 0xf8000000-0xfc0fffff] reserved in E820
1062PCI: MMCONFIG for 0000 [bus00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000) (size reduced!)
1063PCI: Using configuration type 1 for base access
1064ACPI: Added _OSI(Module Device)
1065ACPI: Added _OSI(Processor Device)
1066ACPI: Added _OSI(3.0 _SCP Extensions)
1067ACPI: Added _OSI(Processor Aggregator Device)
1068ACPI: Added _OSI(Linux-Dell-Video)
1069ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
1070ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
1071ACPI: 4 ACPI AML tables successfully acquired and loaded
1072ACPI: Interpreter enabled
1073ACPI: (supports S0 S5)
1074ACPI: Using IOAPIC for interrupt routing
1075PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
1076ACPI: Enabled 7 GPEs in block 00 to 1F
1077ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
1078acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments]
1079acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
1080acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
1081acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
1082PCI host bridge to bus 0000:00
1083pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
1084pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
1085pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
1086pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
1087pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
1088pci_bus 0000:00: root bus resource [bus 00-ff]
1089pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
1090pci 0000:00:00.2: [1022:1567] type 00 class 0x080600
1091pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
1092pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
1093pci 0000:00:02.2: enabling Extended Tags
1094pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
1095pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
1096pci 0000:00:02.3: enabling Extended Tags
1097pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
1098pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
1099pci 0000:00:02.4: enabling Extended Tags
1100pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
1101pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
1102pci 0000:00:02.5: enabling Extended Tags
1103pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
1104pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
1105pci 0000:00:08.0: reg 0x10: [mem 0xf7e80000-0xf7e9ffff 64bit pref]
1106pci 0000:00:08.0: reg 0x18: [mem 0xf7c00000-0xf7cfffff]
1107pci 0000:00:08.0: reg 0x1c: [mem 0xf7ea4000-0xf7ea4fff]
1108pci 0000:00:08.0: reg 0x20: [mem 0xf7d00000-0xf7dfffff]
1109pci 0000:00:08.0: reg 0x24: [mem 0xf7ea0000-0xf7ea1fff]
1110pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
1111pci 0000:00:10.0: reg 0x10: [mem 0xf7ea2000-0xf7ea3fff 64bit]
1112pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
1113pci 0000:00:11.0: [1022:7800] type 00 class 0x010601
1114pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017]
1115pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023]
1116pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f]
1117pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027]
1118pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f]
1119pci 0000:00:11.0: reg 0x24: [mem 0xf7ea5000-0xf7ea53ff]
1120pci 0000:00:11.0: PME# supported from D3hot
1121pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
1122pci 0000:00:13.0: reg 0x10: [mem 0xf7ea6000-0xf7ea60ff]
1123pci 0000:00:13.0: supports D1 D2
1124pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
1125pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
1126pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
1127pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
1128pci 0000:00:14.7: reg 0x10: [mem 0xf7ea7000-0xf7ea70ff 64bit]
1129pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
1130pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
1131pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
1132pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
1133pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
1134pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
1135pci 0000:01:00.0: [8086:157b] type 00 class 0x020000
1136pci 0000:01:00.0: reg 0x10: [mem 0xf7900000-0xf791ffff]
1137pci 0000:01:00.0: reg 0x18: [io 0x1000-0x101f]
1138pci 0000:01:00.0: reg 0x1c: [mem 0xf7920000-0xf7923fff]
1139pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
1140pci 0000:00:02.2: PCI bridge to [bus 01]
1141pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
1142pci 0000:00:02.2: bridge window [mem 0xf7900000-0xf79fffff]
1143pci 0000:02:00.0: [8086:157b] type 00 class 0x020000
1144pci 0000:02:00.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff]
1145pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f]
1146pci 0000:02:00.0: reg 0x1c: [mem 0xf7a20000-0xf7a23fff]
1147pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
1148pci 0000:00:02.3: PCI bridge to [bus 02]
1149pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
1150pci 0000:00:02.3: bridge window [mem 0xf7a00000-0xf7afffff]
1151pci 0000:03:00.0: [8086:157b] type 00 class 0x020000
1152pci 0000:03:00.0: reg 0x10: [mem 0xf7b00000-0xf7b1ffff]
1153pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
1154pci 0000:03:00.0: reg 0x1c: [mem 0xf7b20000-0xf7b23fff]
1155pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
1156pci 0000:00:02.4: PCI bridge to [bus 03]
1157pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
1158pci 0000:00:02.4: bridge window [mem 0xf7b00000-0xf7bfffff]
1159pci 0000:04:00.0: [168c:003c] type 00 class 0x028000
1160pci 0000:04:00.0: reg 0x10: [mem 0xf7600000-0xf77fffff 64bit]
1161pci 0000:04:00.0: reg 0x30: [mem 0xf7800000-0xf780ffff pref]
1162pci 0000:04:00.0: supports D1 D2
1163pci 0000:00:02.5: PCI bridge to [bus 04]
1164pci 0000:00:02.5: bridge window [mem 0xf7600000-0xf78fffff]
1165pci_bus 0000:00: on NUMA node 0
1166ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
1167ACPI: PCI Interrupt Link [INTB] (IRQs *3 4 5 7 10 11 12 15)
1168ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
1169ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
1170ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
1171ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
1172ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
1173ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
1174vgaarb: loaded
1175SCSI subsystem initialized
1176libata version 3.00 loaded.
1177ACPI: bus type USB registered
1178usbcore: registered new interface driver usbfs
1179usbcore: registered new interface driver hub
1180usbcore: registered new device driver usb
1181PCI: Using ACPI for IRQ routing
1182PCI: pci_cache_line_size set to 64 bytes
1183e820: reserve RAM buffer [mem 0xcfe71000-0xcfffffff]
1184e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
1185clocksource: Switched to clocksource tsc-early
1186ACPI: Failed to create genetlink family for ACPI event
1187pnp: PnP ACPI init
1188system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
1189system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
1190pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
1191pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
1192pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
1193pnp 00:04: Plug and Play ACPI device, IDs PNP0c31 (active)
1194pnp: PnP ACPI: found 5 devices
1195clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
1196pci 0000:00:02.2: PCI bridge to [bus 01]
1197pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
1198pci 0000:00:02.2: bridge window [mem 0xf7900000-0xf79fffff]
1199pci 0000:00:02.3: PCI bridge to [bus 02]
1200pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
1201pci 0000:00:02.3: bridge window [mem 0xf7a00000-0xf7afffff]
1202pci 0000:00:02.4: PCI bridge to [bus 03]
1203pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
1204pci 0000:00:02.4: bridge window [mem 0xf7b00000-0xf7bfffff]
1205pci 0000:00:02.5: PCI bridge to [bus 04]
1206pci 0000:00:02.5: bridge window [mem 0xf7600000-0xf78fffff]
1207pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
1208pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
1209pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
1210pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
1211pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
1212pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
1213pci_bus 0000:01: resource 1 [mem 0xf7900000-0xf79fffff]
1214pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
1215pci_bus 0000:02: resource 1 [mem 0xf7a00000-0xf7afffff]
1216pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
1217pci_bus 0000:03: resource 1 [mem 0xf7b00000-0xf7bfffff]
1218pci_bus 0000:04: resource 1 [mem 0xf7600000-0xf78fffff]
1219pci 0000:00:13.0: PME# does not work under D3, disabling it
1220PCI: CLS 64 bytes, default 64
1221Unpacking initramfs...
1222Freeing initrd memory: 832K
1223PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
1224software IO TLB: mapped [mem 0xcbe71000-0xcfe71000] (64MB)
1225amd_uncore: AMD NB counters detected
1226amd_uncore: AMD LLC counters detected
1227LVT offset 0 assigned for vector 0x400
1228perf: AMD IBS detected (0x000000ff)
1229workingset: timestamp_bits=46 max_order=20 bucket_order=0
1230Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
1231io scheduler mq-deadline registered
1232io scheduler kyber registered
1233io scheduler bfq registered
1234input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
1235ACPI: Power Button [PWRB]
1236input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
1237ACPI: Power Button [PWRF]
1238Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
123900:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
124000:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
1241tpm_tis 00:04: 2.0 TPM (device-id 0x1A, rev-id 16)
1242loop: module loaded
1243ahci 0000:00:11.0: version 3.0
1244ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
1245ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
1246scsi host0: ahci
1247scsi host1: ahci
1248ata1: SATA max UDMA/133 abar m1024@0xf7ea5000 port 0xf7ea5100 irq 19
1249ata2: SATA max UDMA/133 abar m1024@0xf7ea5000 port 0xf7ea5180 irq 19
1250ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1251ehci-pci: EHCI PCI platform driver
1252ehci-pci 0000:00:13.0: EHCI Host Controller
1253ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
1254ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
1255ehci-pci 0000:00:13.0: debug port 2
1256ehci-pci 0000:00:13.0: irq 18, io mem 0xf7ea6000
1257ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
1258usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
1259usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1260usb usb1: Product: EHCI Host Controller
1261usb usb1: Manufacturer: Linux 5.1.0+ ehci_hcd
1262usb usb1: SerialNumber: 0000:00:13.0
1263hub 1-0:1.0: USB hub found
1264hub 1-0:1.0: 2 ports detected
1265ehci-platform: EHCI generic platform driver
1266xhci_hcd 0000:00:10.0: xHCI Host Controller
1267xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
1268xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
1269usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
1270usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1271usb usb2: Product: xHCI Host Controller
1272usb usb2: Manufacturer: Linux 5.1.0+ xhci-hcd
1273usb usb2: SerialNumber: 0000:00:10.0
1274hub 2-0:1.0: USB hub found
1275hub 2-0:1.0: 2 ports detected
1276xhci_hcd 0000:00:10.0: xHCI Host Controller
1277xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
1278xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
1279usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
1280usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
1281usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1282usb usb3: Product: xHCI Host Controller
1283usb usb3: Manufacturer: Linux 5.1.0+ xhci-hcd
1284usb usb3: SerialNumber: 0000:00:10.0
1285hub 3-0:1.0: USB hub found
1286hub 3-0:1.0: 2 ports detected
1287i8042: PNP: No PS/2 controller found.
1288i8042: Probing ports directly.
1289ata2: SATA link down (SStatus 0 SControl 300)
1290usb 2-1: new high-speed USB device number 2 using xhci_hcd
1291ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
1292usb 2-1: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00
1293usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1294usb 2-1: Product: Ultra USB 3.0
1295usb 2-1: Manufacturer: SanDisk
1296usb 2-1: SerialNumber: 4C530001250912120520
1297tsc: Refined TSC clocksource calibration: 998.127 MHz
1298clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc65b93289, max_idle_ns: 881590487074 ns
1299i8042: No controller found
1300sdhci: Secure Digital Host Controller Interface driver
1301sdhci: Copyright(c) Pierre Ossman
1302usbcore: registered new interface driver usbhid
1303usbhid: USB HID core driver
1304random: get_random_bytes called from 0xffffffff810341f2 with crng_init=0
1305sched_clock: Marking stable (3916045165, 37011849)->(4189039685, -235982671)
1306ata1.00: native sectors (28867584) is smaller than sectors (29832192)
1307clocksource: Switched to clocksource tsc
1308ata1.00: ATA-9: SanDisk SSD i110 16GB, i21J719, max UDMA/133
1309ata1.00: 29832192 sectors, multi 1: LBA48 NCQ (depth 32)
1310usb 2-2: new full-speed USB device number 3 using xhci_hcd
1311ata1.00: configured for UDMA/133
1312scsi 0:0:0:0: Direct-Access ATA SanDisk SSD i110 719 PQ: 0 ANSI: 5
1313sd 0:0:0:0: [sda] 29832192 512-byte logical blocks: (15.3 GB/14.2 GiB)
1314sd 0:0:0:0: [sda] Write Protect is off
1315sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
1316sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
1317 sda: sda1 sda2
1318sd 0:0:0:0: [sda] Attached SCSI disk
1319Freeing unused kernel image memory: 688K
1320Write protecting the kernel read-only data: 10240k
1321Freeing unused kernel image memory: 2036K
1322Freeing unused kernel image memory: 1420K
1323Run /init as init process
13242020/02/24 01:00:08 Welcome to u-root!
1325 _
1326 _ e cgroup1: Unknown subsys name 'net_cls'
1327_ _ __ ___ e cgroup1: Unknown subsys name 'hugetlb'
1328 ___ | |_
1329 | | | |____| '__/ _ \ / _ \| __|
1330 | |_| |____| | | (_) | (_) | |_
1331 \__,_| |_| \___/ \___/ \__|
1332
13332020/02/24 01:00:08 u-root init: error creating mount -t "cgroup" -o net_cls,net_prio "cgroup" "/sys/fs/cgroup/net_cls,net_prio" flags 0x0: invalid argument
13342020/02/24 01:00:08 u-root init: error creating mount -t "cgroup" -o hugetlb "cgroup" "/sys/fs/cgroup/hugetlb" flags 0x0: invalid argument
13352020/02/24 01:00:08 Failed to initialize loopback: function not implemented
13362020/02/24 01:00:08 Executing Command: [/bbin/mount -t ext4 /dev/sda1 /var]
13372020/02/24 01:00:08 Executing Command: [/bbin/kexec -c loglvl=all guest_loglvl=all dom0_mem=512M apic_verbosity=debug sched=credit console=com1 no-real-mode --module /var/bzImage console=hvc0 earlyprintk=xen nomodeset root=/dev/sda2 /var/xen.gz]
13382020/02/24 01:00:08 Parsing multiboot header
13392020/02/24 01:00:08 Getting kernel entry point
13402020/02/24 01:00:08 Kernel entry point at 0x200000
13412020/02/24 01:00:08 Parsing ELF segments
13422020/02/24 01:00:08 Parsing memory map
13432020/02/24 01:00:08 Sysfs file "/sys/firmware/memmap/0/type" contains unrecognized memory map type "Unknown E820 type", defaulting to Reserved
13442020/02/24 01:00:08 Sysfs file "/sys/firmware/memmap/4/type" contains unrecognized memory map type "Unknown E820 type", defaulting to Reserved
13452020/02/24 01:00:08 Preparing multiboot info
13462020/02/24 01:00:08 Memory map:
1347[0x0, 0x1000) (len: 0x1000, size: 0x14, type: 2)
1348[0x1000, 0xa0000) (len: 0x9f000, size: 0x14, type: 1)
1349[0xc0000, 0x100000) (len: 0x40000, size: 0x14, type: 2)
1350[0x100000, 0xcfe71000) (len: 0xcfd71000, size: 0x14, type: 1)
1351[0xcfe71000, 0xd0000000) (len: 0x18f000, size: 0x14, type: 2)
1352[0xf8000000, 0xfc000000) (len: 0x4000000, size: 0x14, type: 2)
1353[0xfed40000, 0xfed45000) (len: 0x5000, size: 0x14, type: 2)
1354[0x100000000, 0x12f000000) (len: 0x2f000000, size: 0x14, type: 1)
13552020/02/24 01:00:08 Adding module /var/bzImage
13562020/02/24 01:00:09 Adding trampoline
13572020/02/24 01:00:09 Trampoline entry point at 0x103000
1358kexec_core: Starting new kernel
1359 Xen 4.13-unstable
1360(XEN) Xen version 4.13-unstable (@) (x86_64-pce-linux-gcc (GCC) 9.2.0) debug=y Tue Feb 18 12:50:41 UTC 2020
1361(XEN) Latest ChangeSet: Fri Aug 30 20:35:13 2019 +0100 git:1014f47c7a-dirty
1362(XEN) build-id: 3411a98071e00068f1181637dfbfa0c00798cdfe
1363(XEN) Bootloader: u-root kexec
1364(XEN) Command line: guest_loglvl=all dom0_mem=512M apic_verbosity=debug sched=credit console=com1 no-real-mode
1365(XEN) Xen image load base address: 0
1366(XEN) Video information:
1367(XEN) VGA is text mode 80x25, font 8x16
1368(XEN) Disc information:
1369(XEN) Found 0 MBR signatures
1370(XEN) Found 0 EDD information structures
1371(XEN) Multiboot-e820 RAM map:
1372(XEN) 0000000000000000 - 0000000000001000 (reserved)
1373(XEN) 0000000000001000 - 00000000000a0000 (usable)
1374(XEN) 00000000000c0000 - 0000000000100000 (reserved)
1375(XEN) 0000000000100000 - 00000000cfe71000 (usable)
1376(XEN) 00000000cfe71000 - 00000000d0000000 (reserved)
1377(XEN) 00000000f8000000 - 00000000fc000000 (reserved)
1378(XEN) 00000000fed40000 - 00000000fed45000 (reserved)
1379(XEN) 0000000100000000 - 000000012f000000 (usable)
1380(XEN) New Xen image base address: 0xcf800000
1381(XEN) ACPI: RSDP 000F0800, 0024 (r2 COREv4)
1382(XEN) ACPI: XSDT CFE820E0, 0074 (r1 COREv4 COREBOOT 0 CORE 20180531)
1383(XEN) ACPI: FACP CFE83D80, 00F4 (r4 COREv4 COREBOOT 0 CORE 20180531)
1384(XEN) ACPI: DSDT CFE82280, 1AF6 (r2 COREv4 COREBOOT 10001 INTL 20180531)
1385(XEN) ACPI: FACS CFE82240, 0040
1386(XEN) ACPI: SSDT CFE83E80, 01E5 (r2 COREv4 COREBOOT 2A CORE 20180531)
1387(XEN) ACPI: MCFG CFE84070, 003C (r1 COREv4 COREBOOT 0 CORE 20180531)
1388(XEN) ACPI: TPM2 CFE840B0, 004C (r4 COREv4 COREBOOT 0 CORE 20180531)
1389(XEN) ACPI: APIC CFE84100, 007E (r2 COREv4 COREBOOT 0 CORE 20180531)
1390(XEN) ACPI: HEST CFE84180, 01D0 (r1 COREv4 COREBOOT 0 CORE 20180531)
1391(XEN) ACPI: IVRS CFE84350, 00D0 (r1 COREv4 COREBOOT 0 CORE 20180531)
1392(XEN) ACPI: SSDT CFE84420, 48A6 (r2 AMD AGESA 2 MSFT 4000000)
1393(XEN) ACPI: SSDT CFE88CD0, 07C8 (r1 AMD AGESA 1 AMD 1)
1394(XEN) ACPI: HPET CFE894A0, 0038 (r1 COREv4 COREBOOT 0 CORE 20180531)
1395(XEN) System RAM: 4078MB (4175936kB)
1396(XEN) No NUMA configuration found
1397(XEN) Faking a node at 0000000000000000-000000012f000000
1398(XEN) Domain heap initialised
1399(XEN) CPU Vendor: AMD, Family 22 (0x16), Model 48 (0x30), Stepping 1 (raw 00730f01)
1400(XEN) found SMP MP-table at 000f0400
1401(XEN) DMI present.
1402(XEN) APIC boot state is 'xapic'
1403(XEN) Using APIC driver default
1404(XEN) ACPI: PM-Timer IO Port: 0x818 (32 bits)
1405(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:804,1:0], pm1x_evt[1:800,1:0]
1406(XEN) ACPI: 32/64X FACS address mismatch in FADT - cfe82240/0000000000000000, using 32
1407(XEN) ACPI: wakeup_vec[cfe8224c], vec_size[20]
1408(XEN) ACPI: Local APIC address 0xfee00000
1409(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
1410(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
1411(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
1412(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
1413(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
1414(XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
1415(XEN) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
1416(XEN) ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24])
1417(XEN) IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
1418(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
1419(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
1420(XEN) ACPI: IRQ0 used by override.
1421(XEN) ACPI: IRQ2 used by override.
1422(XEN) ACPI: IRQ9 used by override.
1423(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
1424(XEN) ACPI: HPET id: 0x10228201 base: 0xfed00000
1425(XEN) PCI: MCFG configuration 0: base f8000000 segment 0000 buses 00 - 40
1426(XEN) PCI: MCFG area at f8000000 reserved in E820
1427(XEN) PCI: updated MCFG configuration 0: base f8000000 segment 0 buses 0 - 31
1428(XEN) PCI: Using MCFG for segment 0000 bus 00-1f
1429(XEN) ERST table was not found
1430(XEN) HEST: Table parsing has been initialized
1431(XEN) Using ACPI (MADT) for SMP configuration information
1432(XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs)
1433(XEN) mapped APIC to ffff82cfffffb000 (fee00000)
1434(XEN) mapped IOAPIC to ffff82cfffffa000 (fec00000)
1435(XEN) mapped IOAPIC to ffff82cfffff9000 (fec20000)
1436(XEN) IRQ limits: 56 GSI, 728 MSI/MSI-X
1437(XEN) xstate: size: 0x340 and states: 0x7
1438(XEN) CPU0: AMD Fam16h machine check reporting enabled
1439(XEN) Speculative mitigation facilities:
1440(XEN) Hardware features:
1441(XEN) Compiled-in support: INDIRECT_THUNK SHADOW_PAGING
1442(XEN) Xen settings: BTI-Thunk LFENCE, SPEC_CTRL: No, Other:
1443(XEN) Support for HVM VMs: RSB
1444(XEN) Support for PV VMs: RSB
1445(XEN) XPTI (64-bit PV only): Dom0 disabled, DomU disabled (without PCID)
1446(XEN) PV L1TF shadowing: Dom0 disabled, DomU disabled
1447(XEN) Using scheduler: SMP Credit Scheduler (credit)
1448(XEN) Platform timer is 14.318MHz HPET
1449(XEN) Detected 998.148 MHz processor.
1450(XEN) alt table ffff82d0804741b0 -> ffff82d0804810e6
1451(XEN) AMD-Vi: IOMMU Extended Features:
1452(XEN) - Peripheral Page Service Request
1453(XEN) - Invalidate All Command
1454(XEN) - Guest APIC
1455(XEN) - Performance Counters
1456(XEN) - Host Address Translation Size: 0x2
1457(XEN) - Guest Address Translation Size: 0
1458(XEN) - Guest CR3 Root Table Level: 0
1459(XEN) - Maximum PASID: 0x8
1460(XEN) - SMI Filter Register: 0x1
1461(XEN) - SMI Filter Register Count: 0x2
1462(XEN) - Guest Virtual APIC Modes: 0x1
1463(XEN) - Dual PPR Log: 0
1464(XEN) - Dual Event Log: 0
1465(XEN) - Device Table Segmentation: 0
1466(XEN) - Memory Access Routing and Control: 0
1467(XEN) - VM Table Size: 0
1468(XEN) AMD-Vi: Disabled HAP memory map sharing with IOMMU
1469(XEN) AMD-Vi: IOMMU 0 Enabled.
1470(XEN) I/O virtualisation enabled
1471(XEN) - Dom0 mode: Relaxed
1472(XEN) Interrupt remapping enabled
1473(XEN) nr_sockets: 1
1474(XEN) Getting VERSION: 80050010
1475(XEN) Getting VERSION: 80050010
1476(XEN) Getting ID: 0
1477(XEN) Getting LVT0: 10000
1478(XEN) Getting LVT1: 400
1479(XEN) masked ExtINT on CPU#0
1480(XEN) ENABLING IO-APIC IRQs
1481(XEN) -> Using new ACK method
1482(XEN) init IO_APIC IRQs
1483(XEN) IO-APIC (apicid-pin) 4-0, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23, 5-0, 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15, 5-16, 5-17, 5-18, 5-19, 5-20, 5-21, 5-22, 5-23, 5-24, 5-25, 5-26, 5-27, 5-28, 5-29, 5-30, 5-31 not connected.
1484(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0
1485(XEN) number of MP IRQ sources: 15.
1486(XEN) number of IO-APIC #4 registers: 24.
1487(XEN) number of IO-APIC #5 registers: 32.
1488(XEN) testing the IO APIC.......................
1489(XEN) IO APIC #4......
1490(XEN) .... register #00: 04000000
1491(XEN) ....... : physical APIC id: 04
1492(XEN) ....... : Delivery Type: 0
1493(XEN) ....... : LTS : 0
1494(XEN) .... register #01: 00178021
1495(XEN) ....... : max redirection entries: 0017
1496(XEN) ....... : PRQ implemented: 1
1497(XEN) ....... : IO APIC version: 0021
1498(XEN) .... register #02: 04000000
1499(XEN) ....... : arbitration: 04
1500(XEN) .... register #03: 04178021
1501(XEN) ....... : Boot DT : 1
1502(XEN) .... IRQ redirection table:
1503(XEN) NR Dst Msk Trg IRR Pol Stat DstM DelM Vec
1504(XEN) 00 00 1 0 0 0 0 0 7 00
1505(XEN) 01 01 0 0 0 0 0 1 1 30
1506(XEN) 02 01 0 0 0 0 0 1 1 F0
1507(XEN) 03 01 0 0 0 0 0 1 1 38
1508(XEN) 04 01 0 0 0 0 0 1 1 F1
1509(XEN) 05 01 0 0 0 0 0 1 1 40
1510(XEN) 06 01 0 0 0 0 0 1 1 48
1511(XEN) 07 01 0 0 0 0 0 1 1 50
1512(XEN) 08 01 0 0 0 0 0 1 1 58
1513(XEN) 09 01 1 1 0 1 0 1 1 60
1514(XEN) 0a 01 0 0 0 0 0 1 1 68
1515(XEN) 0b 01 0 0 0 0 0 1 1 70
1516(XEN) 0c 01 0 0 0 0 0 1 1 78
1517(XEN) 0d 01 0 0 0 0 0 1 1 88
1518(XEN) 0e 01 0 0 0 0 0 1 1 90
1519(XEN) 0f 01 0 0 0 0 0 1 1 98
1520(XEN) 10 00 1 0 0 0 0 0 0 00
1521(XEN) 11 00 1 0 0 0 0 0 0 00
1522(XEN) 12 00 1 0 0 0 0 0 0 00
1523(XEN) 13 00 1 0 0 0 0 0 0 00
1524(XEN) 14 00 1 0 0 0 0 0 0 00
1525(XEN) 15 00 1 0 0 0 0 0 0 00
1526(XEN) 16 00 1 0 0 0 0 0 0 00
1527(XEN) 17 00 1 0 0 0 0 0 0 00
1528(XEN) IO APIC #5......
1529(XEN) .... register #00: 00000000
1530(XEN) ....... : physical APIC id: 00
1531(XEN) ....... : Delivery Type: 0
1532(XEN) ....... : LTS : 0
1533(XEN) .... register #01: 001F8021
1534(XEN) ....... : max redirection entries: 001F
1535(XEN) ....... : PRQ implemented: 1
1536(XEN) ....... : IO APIC version: 0021
1537(XEN) .... register #02: 00000000
1538(XEN) ....... : arbitration: 00
1539(XEN) .... IRQ redirection table:
1540(XEN) NR Dst Msk Trg IRR Pol Stat DstM DelM Vec
1541(XEN) 00 00 1 0 0 0 0 0 0 00
1542(XEN) 01 00 1 0 0 0 0 0 0 00
1543(XEN) 02 00 1 0 0 0 0 0 0 00
1544(XEN) 03 00 1 0 0 0 0 0 0 00
1545(XEN) 04 00 1 0 0 0 0 0 0 00
1546(XEN) 05 00 1 0 0 0 0 0 0 00
1547(XEN) 06 00 1 0 0 0 0 0 0 00
1548(XEN) 07 00 1 0 0 0 0 0 0 00
1549(XEN) 08 00 1 0 0 0 0 0 0 00
1550(XEN) 09 00 1 0 0 0 0 0 0 00
1551(XEN) 0a 00 1 0 0 0 0 0 0 00
1552(XEN) 0b 00 1 0 0 0 0 0 0 00
1553(XEN) 0c 00 1 0 0 0 0 0 0 00
1554(XEN) 0d 00 1 0 0 0 0 0 0 00
1555(XEN) 0e 00 1 0 0 0 0 0 0 00
1556(XEN) 0f 00 1 0 0 0 0 0 0 00
1557(XEN) 10 00 1 0 0 0 0 0 0 00
1558(XEN) 11 00 1 0 0 0 0 0 0 00
1559(XEN) 12 00 1 0 0 0 0 0 0 00
1560(XEN) 13 00 1 0 0 0 0 0 0 00
1561(XEN) 14 00 1 0 0 0 0 0 0 00
1562(XEN) 15 00 1 0 0 0 0 0 0 00
1563(XEN) 16 00 1 0 0 0 0 0 0 00
1564(XEN) 17 00 1 0 0 0 0 0 0 00
1565(XEN) 18 00 1 0 0 0 0 0 0 00
1566(XEN) 19 00 1 0 0 0 0 0 0 00
1567(XEN) 1a 00 1 0 0 0 0 0 0 00
1568(XEN) 1b 00 1 0 0 0 0 0 0 00
1569(XEN) 1c 00 1 0 0 0 0 0 0 00
1570(XEN) 1d 00 1 0 0 0 0 0 0 00
1571(XEN) 1e 00 1 0 0 0 0 0 0 00
1572(XEN) 1f 00 1 0 0 0 0 0 0 00
1573(XEN) Using vector-based indexing
1574(XEN) IRQ to pin mappings:
1575(XEN) IRQ240 -> 0:2
1576(XEN) IRQ48 -> 0:1
1577(XEN) IRQ56 -> 0:3
1578(XEN) IRQ241 -> 0:4
1579(XEN) IRQ64 -> 0:5
1580(XEN) IRQ72 -> 0:6
1581(XEN) IRQ80 -> 0:7
1582(XEN) IRQ88 -> 0:8
1583(XEN) IRQ96 -> 0:9
1584(XEN) IRQ104 -> 0:10
1585(XEN) IRQ112 -> 0:11
1586(XEN) IRQ120 -> 0:12
1587(XEN) IRQ136 -> 0:13
1588(XEN) IRQ144 -> 0:14
1589(XEN) IRQ152 -> 0:15
1590(XEN) .................................... done.
1591(XEN) Using local APIC timer interrupts.
1592(XEN) calibrating APIC timer ...
1593(XEN) ..... CPU clock speed is 998.0325 MHz.
1594(XEN) ..... host bus clock speed is 99.8030 MHz.
1595(XEN) ..... bus_scale = 0x6634
1596(XEN) Allocated console ring of 32 KiB.
1597(XEN) mwait-idle: does not run on family 22 model 48
1598(XEN) HVM: ASIDs enabled.
1599(XEN) SVM: Supported advanced features:
1600(XEN) - Nested Page Tables (NPT)
1601(XEN) - Last Branch Record (LBR) Virtualisation
1602(XEN) - Next-RIP Saved on #VMEXIT
1603(XEN) - DecodeAssists
1604(XEN) - Pause-Intercept Filter
1605(XEN) - Pause-Intercept Filter Threshold
1606(XEN) - TSC Rate MSR
1607(XEN) HVM: SVM enabled
1608(XEN) HVM: Hardware Assisted Paging (HAP) detected
1609(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
1610(XEN) alt table ffff82d0804741b0 -> ffff82d0804810e6
1611(XEN) masked ExtINT on CPU#1
1612(XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = 0xfdf8000000, flags = 0x18
1613(XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = 0xfdf8000000, flags = 0x18
1614(XEN) AMD-Vi: IO_PAGE_FAULT: domain = 0, device id = 0xa0, fault address = 0xfdf8000000, flags = 0x18
1615(XEN) masked ExtINT on CPU#2
1616(XEN) masked ExtINT on CPU#3
1617(XEN) Brought up 4 CPUs
1618(XEN) Running stub recovery selftests...
1619(XEN) traps.c:1567: GPF (0000): ffff82d0bffff041 [ffff82d0bffff041] -> ffff82d0803873ff
1620(XEN) traps.c:762: Trap 12: ffff82d0bffff040 [ffff82d0bffff040] -> ffff82d0803873ff
1621(XEN) traps.c:1101: Trap 3: ffff82d0bffff041 [ffff82d0bffff041] -> ffff82d0803873ff
1622(XEN) VPMU: disabled
1623(XEN) MCA: Use hw thresholding to adjust polling frequency
1624(XEN) mcheck_poll: Machine check polling timer started.
1625(XEN) mtrr: your CPUs had inconsistent variable MTRR settings
1626(XEN) mtrr: probably your BIOS does not setup all CPUs.
1627(XEN) mtrr: corrected configuration.
1628(XEN) MTRR default type: uncachable
1629(XEN) MTRR fixed ranges enabled:
1630(XEN) 00000-9ffff write-back
1631(XEN) a0000-bffff uncachable
1632(XEN) c0000-fffff write-back
1633(XEN) MTRR variable ranges enabled:
1634(XEN) 0 base 00ff800000 mask ffff800000 write-protect
1635(XEN) 1 base 00c0000000 mask fff0000000 write-back
1636(XEN) 2 base 0080000000 mask ffc0000000 write-back
1637(XEN) 3 base 0000000000 mask ff80000000 write-back
1638(XEN) 4 disabled
1639(XEN) 5 disabled
1640(XEN) 6 disabled
1641(XEN) 7 disabled
1642(XEN) TOM2: 00012f000000 (WB)
1643(XEN) Dom0 has maximum 632 PIRQs
1644(XEN) NX (Execute Disable) protection active
1645(XEN) *** Building a PV Dom0 ***
1646(XEN) ELF: phdr: paddr=0x1000000 memsz=0x12aa000
1647(XEN) ELF: phdr: paddr=0x2400000 memsz=0x15b000
1648(XEN) ELF: phdr: paddr=0x255b000 memsz=0x22858
1649(XEN) ELF: phdr: paddr=0x257e000 memsz=0x2ae000
1650(XEN) ELF: memory: 0x1000000 -> 0x282c000
1651(XEN) ELF: note: GUEST_OS = "linux"
1652(XEN) ELF: note: GUEST_VERSION = "2.6"
1653(XEN) ELF: note: XEN_VERSION = "xen-3.0"
1654(XEN) ELF: note: VIRT_BASE = 0xffffffff80000000
1655(XEN) ELF: note: INIT_P2M = 0x8000000000
1656(XEN) ELF: note: ENTRY = 0xffffffff8257e180
1657(XEN) ELF: note: HYPERCALL_PAGE = 0xffffffff81001000
1658(XEN) ELF: note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
1659(XEN) ELF: note: SUPPORTED_FEATURES = 0x8801
1660(XEN) ELF: note: PAE_MODE = "yes"
1661(XEN) ELF: note: LOADER = "generic"
1662(XEN) ELF: note: unknown (0xd)
1663(XEN) ELF: note: SUSPEND_CANCEL = 0x1
1664(XEN) ELF: note: MOD_START_PFN = 0x1
1665(XEN) ELF: note: HV_START_LOW = 0xffff800000000000
1666(XEN) ELF: note: PADDR_OFFSET = 0
1667(XEN) ELF: note: PHYS32_ENTRY = 0x10003c0
1668(XEN) ELF: Found PVH image
1669(XEN) ELF: addresses:
1670(XEN) virt_base = 0xffffffff80000000
1671(XEN) elf_paddr_offset = 0x0
1672(XEN) virt_offset = 0xffffffff80000000
1673(XEN) virt_kstart = 0xffffffff81000000
1674(XEN) virt_kend = 0xffffffff8282c000
1675(XEN) virt_entry = 0xffffffff8257e180
1676(XEN) p2m_base = 0x8000000000
1677(XEN) Xen kernel: 64-bit, lsb, compat32
1678(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x282c000
1679(XEN) PHYSICAL MEMORY ARRANGEMENT:
1680(XEN) Dom0 alloc.: 0000000124000000->0000000128000000 (114688 pages to be allocated)
1681(XEN) VIRTUAL MEMORY ARRANGEMENT:
1682(XEN) Loaded kernel: ffffffff81000000->ffffffff8282c000
1683(XEN) Init. ramdisk: 0000000000000000->0000000000000000
1684(XEN) Phys-Mach map: 0000008000000000->0000008000100000
1685(XEN) Start info: ffffffff8282c000->ffffffff8282c4b8
1686(XEN) Xenstore ring: 0000000000000000->0000000000000000
1687(XEN) Console ring: 0000000000000000->0000000000000000
1688(XEN) Page tables: ffffffff8282d000->ffffffff82846000
1689(XEN) Boot stack: ffffffff82846000->ffffffff82847000
1690(XEN) TOTAL: ffffffff80000000->ffffffff82c00000
1691(XEN) ENTRY ADDRESS: ffffffff8257e180
1692(XEN) Dom0 has maximum 4 VCPUs
1693(XEN) ELF: phdr 0 at 0xffffffff81000000 -> 0xffffffff822aa000
1694(XEN) ELF: phdr 1 at 0xffffffff82400000 -> 0xffffffff8255b000
1695(XEN) ELF: phdr 2 at 0xffffffff8255b000 -> 0xffffffff8257d858
1696(XEN) ELF: phdr 3 at 0xffffffff8257e000 -> 0xffffffff826f9000
1697(XEN) Initial low memory virq threshold set at 0x4000 pages.
1698(XEN) Scrubbing Free RAM in background
1699(XEN) Std. Loglevel: All
1700(XEN) Guest Loglevel: All
1701(XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch input)
1702(XEN) Freed 540kB init memory
1703mapping kernel into physical memory
1704about to get started...
1705Linux version 4.19.78-yocto-standard (oe-user@oe-host) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Wed Feb 19 10:37:33 UTC 2020
1706Command line: console=hvc0 earlyprintk=xen nomodeset root=/dev/sda2
1707x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
1708x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
1709x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
1710x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
1711x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
1712Released 0 page(s)
1713BIOS-provided physical RAM map:
1714Xen: [mem 0x0000000000000000-0x0000000000000fff] reserved
1715Xen: [mem 0x0000000000001000-0x000000000009ffff] usable
1716Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
1717Xen: [mem 0x0000000000100000-0x00000000cfe70fff] usable
1718Xen: [mem 0x00000000cfe71000-0x00000000cfffffff] reserved
1719Xen: [mem 0x00000000f7e00000-0x00000000f7e03fff] reserved
1720Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
1721Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
1722Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
1723Xen: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
1724Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
1725Xen: [mem 0x0000000100000000-0x000000012effffff] usable
1726NX (Execute Disable) protection: active
1727SMBIOS 2.8 present.
1728DMI: PC Engines apu2/apu2, BIOS v4.10.0.2 02/24/2020
1729Hypervisor detected: Xen PV
1730tsc: Detected 998.148 MHz processor
1731last_pfn = 0x12f000 max_arch_pfn = 0x400000000
1732Disabled
1733x86/PAT: MTRRs disabled, skipping PAT initialization too.
1734x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC
1735last_pfn = 0xcfe71 max_arch_pfn = 0x400000000
1736Scanning 1 areas for low memory corruption
1737ACPI: Early table checksum verification disabled
1738ACPI: RSDP 0x00000000000F0800 000024 (v02 COREv4)
1739ACPI: XSDT 0x00000000CFE820E0 000074 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
1740ACPI: FACP 0x00000000CFE83D80 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20180531)
1741ACPI: DSDT 0x00000000CFE82280 001AF6 (v02 COREv4 COREBOOT 00010001 INTL 20180531)
1742ACPI: FACS 0x00000000CFE82240 000040
1743ACPI: SSDT 0x00000000CFE83E80 0001E5 (v02 COREv4 COREBOOT 0000002A CORE 20180531)
1744ACPI: MCFG 0x00000000CFE84070 00003C (v01 COREv4 COREBOOT 00000000 CORE 20180531)
1745ACPI: TPM2 0x00000000CFE840B0 00004C (v04 COREv4 COREBOOT 00000000 CORE 20180531)
1746ACPI: APIC 0x00000000CFE84100 00007E (v02 COREv4 COREBOOT 00000000 CORE 20180531)
1747ACPI: HEST 0x00000000CFE84180 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
1748ACPI: IVRS 0x00000000CFE84350 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
1749ACPI: SSDT 0x00000000CFE84420 0048A6 (v02 AMD AGESA 00000002 MSFT 04000000)
1750ACPI: SSDT 0x00000000CFE88CD0 0007C8 (v01 AMD AGESA 00000001 AMD 00000001)
1751ACPI: HPET 0x00000000CFE894A0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
1752Setting APIC routing to Xen PV.
1753Zone ranges:
1754 DMA [mem 0x0000000000001000-0x0000000000ffffff]
1755 DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
1756 Normal [mem 0x0000000100000000-0x000000012effffff]
1757Movable zone start for each node
1758Early memory node ranges
1759 node 0: [mem 0x0000000000001000-0x000000000009ffff]
1760 node 0: [mem 0x0000000000100000-0x00000000cfe70fff]
1761 node 0: [mem 0x0000000100000000-0x000000012effffff]
1762Reserved but unavailable: 1 pages
1763Initmem setup node 0 [mem 0x0000000000001000-0x000000012effffff]
1764p2m virtual area at (____ptrval____), size is a00000
1765Remapped 97 page(s)
1766ACPI: PM-Timer IO Port: 0x818
1767ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
1768IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
1769IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
1770ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
1771ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
1772Using ACPI (MADT) for SMP configuration information
1773ACPI: HPET id: 0x10228201 base: 0xfed00000
1774smpboot: Allowing 4 CPUs, 0 hotplug CPUs
1775[mem 0xd0000000-0xf7dfffff] available for PCI devices
1776Booting paravirtualized kernel on Xen
1777Xen version: 4.13-unstable (preserve-AD)
1778clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
1779random: get_random_bytes called from start_kernel+0x97/0x4ce with crng_init=0
1780setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
1781percpu: Embedded 44 pages/cpu s141400 r8192 d30632 u524288
1782Built 1 zonelists, mobility grouping on. Total pages: 1027649
1783Kernel command line: console=hvc0 earlyprintk=xen nomodeset root=/dev/sda2
1784You have booted with nomodeset. This means your GPU drivers are DISABLED
1785Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
1786Unless you actually understand what nomodeset does, you should reboot without enabling it
1787Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
1788Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
1789software IO TLB: mapped [mem 0x16800000-0x1a800000] (64MB)
1790Memory: 344676K/4175936K available (14348K kernel code, 1295K rwdata, 2728K rodata, 1616K init, 1052K bss, 3831260K reserved, 0K cma-reserved)
1791SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
1792ftrace: allocating 38930 entries in 153 pages
1793rcu: Preemptible hierarchical RCU implementation.
1794rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
1795 Tasks RCU enabled.
1796rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
1797Using NULL legacy PIC
1798NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 0
1799xen:events: Using FIFO-based ABI
1800Console: colour dummy device 80x25
1801console [tty0] enabled
1802console [hvc0] enabled
1803ACPI: Core revision 20180810
1804clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
1805installing Xen timer for CPU 0
1806clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cc682fe82e, max_idle_ns: 881590410623 ns
1807Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.29 BogoMIPS (lpj=998148)
1808pid_max: default: 32768 minimum: 301
1809Security Framework initialized
1810Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
1811Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
1812Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
1813Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
1814Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
1815Spectre V2 : Mitigation: Full AMD retpoline
1816Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
1817Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
1818Freeing SMP alternatives memory: 40K
1819VPMU disabled by hypervisor.
1820Performance Events: PMU not available due to virtualization, using software events only.
1821rcu: Hierarchical SRCU implementation.
1822MCE: In-kernel MCE decoding enabled.
1823smp: Bringing up secondary CPUs ...
1824installing Xen timer for CPU 1
1825installing Xen timer for CPU 2
1826installing Xen timer for CPU 3
1827smp: Brought up 1 node, 4 CPUs
1828smpboot: Max logical packages: 1
1829devtmpfs: initialized
1830clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
1831futex hash table entries: 1024 (order: 4, 65536 bytes)
1832xor: automatically using best checksumming function avx
1833pinctrl core: initialized pinctrl subsystem
1834NET: Registered protocol family 16
1835xen:grant_table: Grant tables using version 1 layout
1836Grant table initialized
1837ACPI: bus type PCI registered
1838PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xf8000000-0xfc0fffff] (base 0xf8000000)
1839PCI: MMCONFIG at [mem 0xf8000000-0xfc0fffff] reserved in E820
1840PCI: MMCONFIG for 0000 [bus00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000) (size reduced!)
1841(XEN) d0: Forcing write emulation on MFNs f8000-f9fff
1842(XEN) d0: Forcing read-only access to MFN f8002
1843PCI: Using configuration type 1 for base access
1844random: fast init done
1845raid6: sse2x1 gen() 1148 MB/s
1846raid6: sse2x1 xor() 832 MB/s
1847raid6: sse2x2 gen() 1386 MB/s
1848raid6: sse2x2 xor() 1003 MB/s
1849raid6: sse2x4 gen() 1617 MB/s
1850raid6: sse2x4 xor() 1029 MB/s
1851raid6: using algorithm sse2x4 gen() 1617 MB/s
1852raid6: .... xor() 1029 MB/s, rmw enabled
1853raid6: using ssse3x2 recovery algorithm
1854ACPI: Added _OSI(Module Device)
1855ACPI: Added _OSI(Processor Device)
1856ACPI: Added _OSI(3.0 _SCP Extensions)
1857ACPI: Added _OSI(Processor Aggregator Device)
1858ACPI: Added _OSI(Linux-Dell-Video)
1859ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
1860ACPI: 4 ACPI AML tables successfully acquired and loaded
1861(XEN) IOAPIC[0]: Set PCI routing entry (4-9 -> 0x60 -> IRQ 9 Mode:1 Active:1)
1862ACPI: Interpreter enabled
1863ACPI: (supports S0 S1 S5)
1864ACPI: Using IOAPIC for interrupt routing
1865PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
1866ACPI: Enabled 7 GPEs in block 00 to 1F
1867ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
1868acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
1869acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
1870acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
1871acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
1872PCI host bridge to bus 0000:00
1873pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
1874pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
1875pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
1876pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
1877pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
1878pci_bus 0000:00: root bus resource [bus 00-ff]
1879(XEN) PCI add device 0000:00:00.0
1880(XEN) PCI add device 0000:00:00.2
1881(XEN) PCI add device 0000:00:02.0
1882(XEN) PCI add device 0000:00:02.2
1883(XEN) PCI add device 0000:00:02.3
1884(XEN) PCI add device 0000:00:02.4
1885(XEN) PCI add device 0000:00:02.5
1886(XEN) PCI add device 0000:00:08.0
1887(XEN) PCI add device 0000:00:10.0
1888(XEN) SR-IOV device 0000:00:11.0 has its virtual functions already enabled (01ab)
1889(XEN) PCI add device 0000:00:11.0
1890(XEN) PCI add device 0000:00:13.0
1891(XEN) PCI add device 0000:00:14.0
1892(XEN) PCI add device 0000:00:14.3
1893(XEN) PCI add device 0000:00:14.7
1894(XEN) PCI add device 0000:00:18.0
1895(XEN) PCI add device 0000:00:18.1
1896(XEN) PCI add device 0000:00:18.2
1897(XEN) PCI add device 0000:00:18.3
1898(XEN) PCI add device 0000:00:18.4
1899(XEN) PCI add device 0000:00:18.5
1900(XEN) PCI add device 0000:01:00.0
1901pci 0000:00:02.2: PCI bridge to [bus 01]
1902(XEN) PCI add device 0000:02:00.0
1903pci 0000:00:02.3: PCI bridge to [bus 02]
1904(XEN) PCI add device 0000:03:00.0
1905pci 0000:00:02.4: PCI bridge to [bus 03]
1906(XEN) PCI add device 0000:04:00.0
1907pci 0000:00:02.5: PCI bridge to [bus 04]
1908(XEN) IOAPIC[0]: Set PCI routing entry (4-13 -> 0x88 -> IRQ 13 Mode:0 Active:0)
1909(XEN) IOAPIC[0]: Set PCI routing entry (4-7 -> 0x50 -> IRQ 7 Mode:1 Active:1)
1910ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
1911ACPI: PCI Interrupt Link [INTB] (IRQs *3 4 5 7 10 11 12 15)
1912ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
1913ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
1914ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
1915ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
1916ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
1917ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
1918xen:balloon: Initialising balloon driver
1919vgaarb: loaded
1920SCSI subsystem initialized
1921ACPI: bus type USB registered
1922usbcore: registered new interface driver usbfs
1923usbcore: registered new interface driver hub
1924usbcore: registered new device driver usb
1925pps_core: LinuxPPS API ver. 1 registered
1926pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
1927PTP clock support registered
1928EDAC MC: Ver: 3.0.0
1929Advanced Linux Sound Architecture Driver Initialized.
1930PCI: Using ACPI for IRQ routing
1931Bluetooth: Core ver 2.22
1932NET: Registered protocol family 31
1933Bluetooth: HCI device and connection manager initialized
1934Bluetooth: HCI socket layer initialized
1935Bluetooth: L2CAP socket layer initialized
1936Bluetooth: SCO socket layer initialized
1937clocksource: Switched to clocksource tsc-early
1938pnp: PnP ACPI init
1939system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
1940(XEN) IOAPIC[0]: Set PCI routing entry (4-8 -> 0x58 -> IRQ 8 Mode:0 Active:0)
1941Already setup the GSI :4
1942(XEN) IOAPIC[0]: Set PCI routing entry (4-3 -> 0x38 -> IRQ 3 Mode:0 Active:0)
1943pnp: PnP ACPI: found 5 devices
1944PM-Timer failed consistency check (0xffffff) - aborting.
1945pci 0000:00:02.2: PCI bridge to [bus 01]
1946pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
1947pci 0000:00:02.2: bridge window [mem 0xf7900000-0xf79fffff]
1948pci 0000:00:02.3: PCI bridge to [bus 02]
1949pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
1950pci 0000:00:02.3: bridge window [mem 0xf7a00000-0xf7afffff]
1951pci 0000:00:02.4: PCI bridge to [bus 03]
1952pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
1953pci 0000:00:02.4: bridge window [mem 0xf7b00000-0xf7bfffff]
1954pci 0000:00:02.5: PCI bridge to [bus 04]
1955pci 0000:00:02.5: bridge window [mem 0xf7600000-0xf78fffff]
1956NET: Registered protocol family 2
1957tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
1958TCP established hash table entries: 32768 (order: 6, 262144 bytes)
1959TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
1960TCP: Hash tables configured (established 32768 bind 32768)
1961UDP hash table entries: 2048 (order: 4, 65536 bytes)
1962UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
1963NET: Registered protocol family 1
1964RPC: Registered named UNIX socket transport module.
1965RPC: Registered udp transport module.
1966RPC: Registered tcp transport module.
1967RPC: Registered tcp NFSv4.1 backchannel transport module.
1968(XEN) IOAPIC[0]: Set PCI routing entry (4-18 -> 0xa0 -> IRQ 18 Mode:1 Active:1)
1969Already setup the GSI :18
1970pci 0000:00:13.0: PME# does not work under D3, disabling it
1971Machine check injector initialized
1972Scanning for low memory corruption every 60 seconds
1973Initialise system trusted keyrings
1974workingset: timestamp_bits=46 max_order=17 bucket_order=0
1975NFS: Registering the id_resolver key type
1976Key type id_resolver registered
1977Key type id_legacy registered
1978Key type asymmetric registered
1979Asymmetric key parser 'x509' registered
1980Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
1981io scheduler noop registered
1982io scheduler deadline registered
1983io scheduler cfq registered (default)
1984io scheduler mq-deadline registered
1985io scheduler kyber registered
1986(XEN) IOAPIC[1]: Set PCI routing entry (5-1 -> 0xa8 -> IRQ 25 Mode:1 Active:1)
1987(XEN) IOAPIC[1]: Set PCI routing entry (5-2 -> 0xb8 -> IRQ 26 Mode:1 Active:1)
1988(XEN) IOAPIC[1]: Set PCI routing entry (5-3 -> 0xc8 -> IRQ 27 Mode:1 Active:1)
1989(XEN) IOAPIC[1]: Set PCI routing entry (5-0 -> 0xd8 -> IRQ 24 Mode:1 Active:1)
1990pcieport 0000:00:02.2: AER enabled with IRQ 82
1991pcieport 0000:00:02.3: AER enabled with IRQ 83
1992pcieport 0000:00:02.4: AER enabled with IRQ 84
1993pcieport 0000:00:02.5: AER enabled with IRQ 85
1994pcieport 0000:00:02.2: Signaling PME with IRQ 82
1995pcieport 0000:00:02.3: Signaling PME with IRQ 83
1996pcieport 0000:00:02.4: Signaling PME with IRQ 84
1997pcieport 0000:00:02.5: Signaling PME with IRQ 85
1998input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
1999ACPI: Power Button [PWRB]
2000input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
2001ACPI: Power Button [PWRF]
2002xen:xen_evtchn: Event-channel device installed
2003xen_mcelog: /dev/mcelog registered by Xen
2004Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
200500:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
2006tpm_tis 00:04: 2.0 TPM (device-id 0x1A, rev-id 16)
2007brd: module loaded
2008loop: module loaded
2009Uniform Multi-Platform E-IDE driver
2010ide-gd driver 1.18
2011ide-cd driver 5.00
2012(XEN) IOAPIC[0]: Set PCI routing entry (4-19 -> 0x29 -> IRQ 19 Mode:1 Active:1)
2013ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
2014ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
2015scsi host0: ahci
2016scsi host1: ahci
2017ata1: SATA max UDMA/133 abar m1024@0xf7ea5000 port 0xf7ea5100 irq 19
2018ata2: SATA max UDMA/133 abar m1024@0xf7ea5000 port 0xf7ea5180 irq 19
2019e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
2020e100: Copyright(c) 1999-2006 Intel Corporation
2021e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
2022e1000: Copyright (c) 1999-2006 Intel Corporation.
2023e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
2024e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
2025igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
2026igb: Copyright (c) 2007-2014 Intel Corporation.
2027(XEN) IOAPIC[1]: Set PCI routing entry (5-4 -> 0x31 -> IRQ 28 Mode:1 Active:1)
2028pps pps0: new PPS source ptp0
2029igb 0000:01:00.0: added PHC on eth0
2030igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
2031igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:3f:bc
2032igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
2033igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
2034(XEN) IOAPIC[1]: Set PCI routing entry (5-8 -> 0x61 -> IRQ 32 Mode:1 Active:1)
2035pps pps1: new PPS source ptp1
2036igb 0000:02:00.0: added PHC on eth1
2037igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
2038igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:3f:bd
2039igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
2040igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
2041(XEN) IOAPIC[1]: Set PCI routing entry (5-12 -> 0x91 -> IRQ 36 Mode:1 Active:1)
2042pps pps2: new PPS source ptp2
2043igb 0000:03:00.0: added PHC on eth2
2044igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
2045igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:3f:be
2046igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
2047igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
2048xen_netfront: Initialising Xen virtual ethernet driver
2049ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
2050ehci-pci: EHCI PCI platform driver
2051Already setup the GSI :18
2052ehci-pci 0000:00:13.0: EHCI Host Controller
2053ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
2054ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
2055ehci-pci 0000:00:13.0: debug port 2
2056ehci-pci 0000:00:13.0: irq 18, io mem 0xf7ea6000
2057ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
2058hub 1-0:1.0: USB hub found
2059hub 1-0:1.0: 2 ports detected
2060ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
2061ohci-pci: OHCI PCI platform driver
2062uhci_hcd: USB Universal Host Controller Interface driver
2063Already setup the GSI :18
2064xhci_hcd 0000:00:10.0: xHCI Host Controller
2065xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
2066xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
2067hub 2-0:1.0: USB hub found
2068hub 2-0:1.0: 2 ports detected
2069xhci_hcd 0000:00:10.0: xHCI Host Controller
2070xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
2071xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
2072usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
2073hub 3-0:1.0: USB hub found
2074hub 3-0:1.0: 2 ports detected
2075usbcore: registered new interface driver usb-storage
2076usbcore: registered new interface driver usbserial_generic
2077usbserial: USB Serial support registered for generic
2078usbcore: registered new interface driver ftdi_sio
2079usbserial: USB Serial support registered for FTDI USB Serial Device
2080usbcore: registered new interface driver pl2303
2081usbserial: USB Serial support registered for pl2303
2082i8042: PNP: No PS/2 controller found.
2083i8042: Probing ports directly.
2084ata2: SATA link down (SStatus 0 SControl 300)
2085ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
2086ata1.00: native sectors (28867584) is smaller than sectors (29832192)
2087ata1.00: ATA-9: SanDisk SSD i110 16GB, i21J719, max UDMA/133
2088ata1.00: 29832192 sectors, multi 1: LBA48 NCQ (depth 32)
2089ata1.00: configured for UDMA/133
2090scsi 0:0:0:0: Direct-Access ATA SanDisk SSD i110 719 PQ: 0 ANSI: 5
2091sd 0:0:0:0: [sda] 29832192 512-byte logical blocks: (15.3 GB/14.2 GiB)
2092sd 0:0:0:0: [sda] Write Protect is off
2093sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
2094 sda: sda1 sda2
2095sd 0:0:0:0: [sda] Attached SCSI disk
2096clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc682fe82e, max_idle_ns: 881590410623 ns
2097clocksource: Switched to clocksource tsc
2098i8042: No controller found
2099mousedev: PS/2 mouse device common for all mice
2100rtc_cmos 00:01: RTC can wake from S4
2101rtc_cmos 00:01: registered as rtc0
2102rtc_cmos 00:01: alarms up to one day, 114 bytes nvram
2103device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
2104EDAC amd64: Node 0: DRAM ECC enabled.
2105EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
2106 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
2107 (Note that use of the override may cause unknown side effects.)
2108sdhci: Secure Digital Host Controller Interface driver
2109sdhci: Copyright(c) Pierre Ossman
2110sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
2111(XEN) IOAPIC[0]: Set PCI routing entry (4-16 -> 0x2a -> IRQ 16 Mode:1 Active:1)
2112mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
2113sdhci-pltfm: SDHCI platform and OF driver helper
2114usbcore: registered new interface driver usbhid
2115usbhid: USB HID core driver
2116x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
2117u32 classifier
2118 Actions configured
2119NET: Registered protocol family 10
2120Segment Routing with IPv6
2121sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
2122NET: Registered protocol family 17
2123Key type dns_resolver registered
2124mce: Using 2 MCE banks
2125sched_clock: Marking stable (5205441589, 25065854)->(5249944692, -19437249)
2126Loading compiled-in X.509 certificates
2127Btrfs loaded, crc32c=crc32c-generic
2128Key type encrypted registered
2129console [netcon0] enabled
2130netconsole: network logging started
2131rtc_cmos 00:01: setting system clock to 2020-02-24 01:00:20 UTC (1582506020)
2132ALSA device list:
2133 No soundcards found.
2134md: Waiting for all devices to be available before autodetect
2135md: If you don't use raid, use raid=noautodetect
2136md: Autodetecting RAID arrays.
2137md: autorun ...
2138md: ... autorun DONE.
2139EXT4-fs (sda2): recovery complete
2140EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
2141VFS: Mounted root (ext4 filesystem) on device 8:2.
2142devtmpfs: mounted
2143usb 1-1: new high-speed USB device number 2 using ehci-pci
2144Freeing unused kernel image memory: 1616K
2145Write protecting the kernel read-only data: 20480k
2146usb 2-1: new high-speed USB device number 2 using xhci_hcd
2147Freeing unused kernel image memory: 2012K
2148Freeing unused kernel image memory: 1368K
2149Run /sbin/init as init process
2150mmc0: new ultra high speed SDR104 SDHC card at address aaaa
2151mmcblk0: mmc0:aaaa SC16G 14.8 GiB
2152hub 1-1:1.0: USB hub found
2153hub 1-1:1.0: 4 ports detected
2154usb-storage 2-1:1.0: USB Mass Storage device detected
2155scsi host2: usb-storage 2-1:1.0
2156systemd[1]: systemd 243+ running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
2157systemd[1]: Detected architecture x86-64.
2158
2159Welcome to Reference Yocto distro for PC Engines hardware 0.1 (zeus)!
2160
2161systemd[1]: Set hostname to <pcengines-apu2>.
2162usb 2-2: new full-speed USB device number 3 using xhci_hcd
2163systemd[1]: /lib/systemd/system/xen-qemu-dom0-disk-backend.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/xen/qemu-dom0.pid → /run/xen/qemu-dom0.pid; please update the unit file accordingly.
2164systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
2165random: systemd: uninitialized urandom read (16 bytes read)
2166systemd[1]: Created slice system-getty.slice.
2167[ OK ] Created slice system-getty.slice.
2168random: systemd: uninitialized urandom read (16 bytes read)
2169systemd[1]: Created slice system-serial\x2dgetty.slice.
2170[ OK ] Created slice system-serial\x2dgetty.slice.
2171random: systemd: uninitialized urandom read (16 bytes read)
2172systemd[1]: Created slice User and Session Slice.
2173[ OK ] Created slice User and Session Slice.
2174systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
2175[ OK ] Started Dispatch Password …ts to Console Directory Watch.
2176systemd[1]: Started Forward Password Requests to Wall Directory Watch.
2177[ OK ] Started Forward Password R…uests to Wall Directory Watch.
2178[ OK ] Reached target Paths.
2179[ OK ] Reached target Remote File Systems.
2180[ OK ] Reached target Slices.
2181[ OK ] Reached target Swap.
2182[ OK ] Listening on initctl Compatibility Named Pipe.
2183[ OK ] Listening on Journal Socket (/dev/log).
2184[ OK ] Listening on Journal Socket.
2185[ OK ] Listening on Network Service Netlink Socket.
2186[ OK ] Listening on udev Control Socket.
2187[ OK ] Listening on udev Kernel Socket.
2188 Mounting POSIX Message Queue File System...
2189 Mounting Mount /proc/xen files...
2190 Mounting Kernel Debug File System...
2191 Mounting Temporary Directory (/tmp)...
2192 Starting Create list of st…odes for the current kernel...
2193[ OK ] Started Hardware RNG Entropy Gatherer Daemon.
2194 Starting Journal Service...
2195 Starting Load Kernel Modules...
2196 Starting Remount Root and Kernel File Systems...
2197 Starting udev Coldplug all Devices...
2198[ OK ] Mounted POSIX Message Queue File System.
2199[ OK ] Mounted Mount /proc/xen files.
2200[ OK ] Mounted Kernel Debug File System.
2201[ OK ] Mounted Temporary Directory (/tmp).
2202[ OK ] Started Create list of sta… nodes for the current kernel.
2203xen_pciback: backend is vpci
2204xen_wdt xen_wdt: initialized (timeout=60s, nowayout=0)
2205[ OK ] Started Load Kernel Modules.
2206EXT4-fs (sda2): re-mounted. Opts: (null)
2207 Starting Apply Kernel Variables...
2208[ OK ] Started Remount Root and Kernel File Systems.
2209 Starting Create System Users...
2210[ OK ] Started Apply Kernel Variables.
2211[ OK ] Started Create System Users.
2212 Starting Create Static Device Nodes in /dev...
2213scsi 2:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6
2214sd 2:0:0:0: [sdb] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
2215sd 2:0:0:0: [sdb] Write Protect is off
2216sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
2217random: crng init done
2218random: 7 urandom warning(s) missed due to ratelimiting
2219 sdb: sdb1 sdb2 < sdb5 >
2220sd 2:0:0:0: [sdb] Attached SCSI removable disk
2221[ OK ] Started Create Static Device Nodes in /dev.
2222[ OK ] Reached target Local File Systems (Pre).
2223 Mounting mount xenstore file system...
2224 Mounting /var/volatile...
2225 Starting udev Kernel Device Manager...
2226[ OK ] Mounted mount xenstore file system.
2227[ OK ] Mounted /var/volatile.
2228 Starting Load/Save Random Seed...
2229[ OK ] Started Load/Save Random Seed.
2230[ OK ] Started udev Kernel Device Manager.
2231 Starting Network Service...
2232[ OK ] Started Journal Service.
2233 Starting Flush Journal to Persistent Storage...
2234systemd-journald[125]: Received client request to flush runtime journal.
2235[ OK ] Started Flush Journal to Persistent Storage.
2236bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
2237[ OK ] Started Network Service.
2238IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
2239[ OK ] Started udev Coldplug all Devices.
2240igb 0000:01:00.0 enp1s0: renamed from eth0
2241igb 0000:02:00.0 enp2s0: renamed from eth1
2242igb 0000:03:00.0 enp3s0: renamed from eth2
2243cfg80211: Loading compiled-in X.509 certificates for regulatory database
2244cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
2245platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
2246cfg80211: failed to load regulatory.db
2247(XEN) IOAPIC[1]: Set PCI routing entry (5-16 -> 0x32 -> IRQ 40 Mode:1 Active:1)
2248ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
2249xenbr0: port 1(enp2s0) entered blocking state
2250xenbr0: port 1(enp2s0) entered disabled state
2251device enp2s0 entered promiscuous mode
2252ath10k_pci 0000:04:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
2253ath10k_pci 0000:04:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 1 testmode 0
2254ath10k_pci 0000:04:00.0: firmware ver 10.2.4-1.0-00045 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 ccbd5104
2255IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
2256ath10k_pci 0000:04:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
2257[ OK ] Found device SanDisk_SSD_i110_16GB boot.
2258 Mounting /boot...
2259EXT4-fs (sda1): recovery complete
2260EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
2261[ OK ] Mounted /boot.
2262[ OK ] Reached target Local File Systems.
2263 Starting Rebuild Dynamic Linker Cache...
2264 Starting Create Volatile Files and Directories...
2265[ OK ] Started Create Volatile Files and Directories.
2266 Starting Run pending postinsts...
2267 Starting Rebuild Journal Catalog...
2268 Starting Network Name Resolution...
2269 Starting Network Time Synchronization...
2270 Starting Update UTMP about System Boot/Shutdown...
2271[ OK ] Started Rebuild Dynamic Linker Cache.
2272[ OK ] Started Update UTMP about System Boot/Shutdown.
2273[ OK ] Started Rebuild Journal Catalog.
2274 Starting Update is Completed...
2275[ OK ] Started Update is Completed.
2276[ OK ] Started Network Time Synchronization.
2277[ OK ] Reached target System Time Set.
2278[ OK ] Reached target System Time Synchronized.
2279[ OK ] Started Network Name Resolution.
2280[ OK ] Reached target Network.
2281[ OK ] Reached target Host and Network Name Lookups.
2282ath10k_pci 0000:04:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
2283ath10k_pci 0000:04:00.0 wlp4s0: renamed from wlan0
2284igb 0000:02:00.0 enp2s0: igb: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
2285IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
2286xenbr0: port 1(enp2s0) entered blocking state
2287xenbr0: port 1(enp2s0) entered forwarding state
2288IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
2289[* ] A start job is running for Run pending postinsts (9s / no limit)
2290[** ] A start job is running for Run pending postinsts (10s / no limit)
2291[*** ] A start job is running for Run pending postinsts (10s / no limit)
2292[ *** ] A start job is running for Run pending postinsts (11s / no limit)
2293[ *** ] A start job is running for Run pending postinsts (11s / no limit)
2294[ ***] A start job is running for Run pending postinsts (12s / no limit)
2295[ **] A start job is running for Run pending postinsts (13s / no limit)
2296[ *] A start job is running for Run pending postinsts (13s / no limit)
2297[ OK ] Started Run pending postinsts.
2298[ OK ] Reached target System Initialization.
2299[ OK ] Started Daily Cleanup of Temporary Directories.
2300[ OK ] Reached target Timers.
2301[ OK ] Listening on D-Bus System Message Bus Socket.
2302 Starting sshd.socket.
2303[ OK ] Listening on sshd.socket.
2304[ OK ] Reached target Sockets.
2305[ OK ] Reached target Basic System.
2306[ OK ] Started D-Bus System Message Bus.
2307[ OK ] Started Getty on tty1.
2308[ OK ] Started Serial Getty on hvc0.
2309[ OK ] Reached target Login Prompts.
2310 Starting Login Service...
2311 Starting The Xen xenstore...
2312[ OK ] Started Xinetd A Powerful Replacement For Inetd.
2313 Starting Hostname Service...
2314[ OK ] Started Login Service.
2315[ OK ] Started The Xen xenstore.
2316 Starting xen-init-dom0, in…s, JSON configuration stub)...
2317 Starting Xenconsoled - han…est consoles and hypervisor...
2318[ OK ] Started Hostname Service.
2319[ OK ] Started Xenconsoled - hand…guest consoles and hypervisor.
2320[ OK ] Started xen-init-dom0, ini…des, JSON configuration stub).
2321 Starting qemu for xen dom0 disk backend...
2322[ OK ] Started qemu for xen dom0 disk backend.
2323 Starting Xendomains - star…guests on boot and shutdown...
2324[ OK ] Started Xendomains - start…p guests on boot and shutdown.
2325 Starting Xen-watchdog - run xen watchdog daemon...
2326[ OK ] Started Xen-watchdog - run xen watchdog daemon.
2327[ OK ] Reached target Multi-User System.
2328 Starting Update UTMP about System Runlevel Changes...
2329[ OK ] Started Update UTMP about System Runlevel Changes.
2330
2331Reference Yocto distro for PC Engines hardware 0.1 pcengines-apu2 hvc0
2332
2333pcengines-apu2 login: root
2334root@pcengines-apu2:~# lspci -vvv -s 4:00 04:00.0
233504:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter
2336 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
2337 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
2338 Latency: 0, Cache Line Size: 64 bytes
2339 Interrupt: pin A routed to IRQ 108
2340 Region 0: Memory at f7600000 (64-bit, non-prefetchable) [size=2M]
2341 Expansion ROM at f7800000 [disabled] [size=64K]
2342 Capabilities: [40] Power Management version 2
2343 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
2344 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
2345 Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit-
2346 Address: fee0100c Data: 4000
2347 Masking: 00fe00fe Pending: 00000000
2348 Capabilities: [70] Express (v2) Endpoint, MSI 00
2349 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
2350 ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
2351 DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
2352 RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
2353 MaxPayload 256 bytes, MaxReadReq 512 bytes
2354 DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
2355 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us
2356 ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
2357 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
2358 ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
2359 LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
2360 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
2361 DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
2362 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
2363 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
2364 AtomicOpsCtl: ReqEn-
2365 LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
2366 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
2367 Compliance De-emphasis: -6dB
2368 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
2369 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
2370 Capabilities: [100 v1] Advanced Error Reporting
2371 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
2372 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
2373 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
2374 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
2375 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
2376 AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
2377 MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
2378 HeaderLog: 00000000 00000000 00000000 00000000
2379 Capabilities: [140 v1] Virtual Channel
2380 Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
2381 Arb: Fixed- WRR32- WRR64- WRR128-
2382 Ctrl: ArbSelect=Fixed
2383 Status: InProgress-
2384 VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
2385 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
2386 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
2387 Status: NegoPending- InProgress-
2388 Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
2389 Kernel driver in use: ath10k_pci
2390 Kernel modules: ath10k_pci
2391
2392root@pcengines-apu2:~#