· 6 years ago · Sep 15, 2019, 10:12 AM
1
2Format: Log Type - Time(microsec) - Message - Optional Info
3Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
4S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2-00059
5S - IMAGE_VARIANT_STRING=LAATANAZA
6S - OEM_IMAGE_VERSION_STRING=ubuntu-247
7S - Boot Config, 0x000000e0
8B - 1216 - PBL, Start
9B - 3723 - bootable_media_detect_entry, Start
10B - 4392 - bootable_media_detect_success, Start
11B - 4396 - elf_loader_entry, Start
12B - 7849 - auth_hash_seg_entry, Start
13B - 8071 - auth_hash_seg_exit, Start
14B - 56318 - elf_segs_hash_verify_entry, Start
15B - 101415 - PBL, End
16B - 91988 - SBL1, Start
17B - 140422 - pm_device_init, Start
18B - 157837 - PM_SET_VAL:Skip
19D - 15799 - pm_device_init, Delta
20B - 158844 - boot_config_data_table_init, Start
21D - 174917 - boot_config_data_table_init, Delta - (420 Bytes)
22B - 337299 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
23B - 343796 - sbl1_ddr_set_params, Start
24B - 347242 - cpr_init, Start
25D - 0 - cpr_init, Delta
26B - 352885 - Pre_DDR_clock_init, Start
27D - 244 - Pre_DDR_clock_init, Delta
28D - 0 - sbl1_ddr_set_params, Delta
29B - 365695 - pm_driver_init, Start
30D - 4605 - pm_driver_init, Delta
31B - 378413 - sbl1_qhsusb_al_do_fast_enum, Start
32B - 378749 - clock_init, Start
33D - 152 - clock_init, Delta
34B - 382714 - boot_flash_init, Start
35D - 38033 - boot_flash_init, Delta
36B - 487451 - Image Load, Start
37D - 60512 - QSEE Image Loaded, Delta - (487948 Bytes)
38B - 548024 - Image Load, Start
39D - 732 - SEC Image Loaded, Delta - (2048 Bytes)
40B - 556350 - sbl1_efs_handle_cookies, Start
41D - 0 - sbl1_efs_handle_cookies, Delta
42B - 562999 - Image Load, Start
43D - 32025 - RPM Image Loaded, Delta - (151348 Bytes)
44B - 595085 - Image Load, Start
45D - 27420 - APPSBL Image Loaded, Delta - (182652 Bytes)
46B - 622566 - QSEE Execution, Start
47D - 122 - QSEE Execution, Delta
48B - 628269 - SBL1, End
49D - 538569 - SBL1, Delta
50S - Throughput, 3000 KB/s (824416 Bytes, 274068 us)
51S - DDR Frequency, 240 MHz
52 Android Bootloader - UART_DM Initialized!!!
53[0] welcome to lk
54
55[0] SCM call: 0x2000601 failed with :fffffffc
56[0] Failed to initialize SCM
57[10] platform_init()
58[10] target_init()
59[10] smem ptable found: ver: 4 len: 24
60[10] ERROR: No devinfo partition found
61[10] Neither 'config' nor 'frp' partition found
62[20] FASTBOOT_KEY_GPIO_ID=37 ret=0
63[70] FASTBOOT_KEY_GPIO_ID=37 ret=1
64[70] buff0 is ff
65[80] Loading (boot) image (5980160): start
66[670] Loading (boot) image (5980160): done
67[670] DTB Total entry: 25, DTB version: 3
68[680] Using DTB entry 0x00000129/00010000/0x00000008/0 for device 0x00000129/00010000/0x00010008/0
69[690] cmdline: noinitrd rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1 earlycon=msm_hsl_uart,0x78b3000 androidboot.serialno=124346 androidboot.baseband=msm rootfstype=ubifs rootflags=bul[720] Updating device tree: start
70[840] Updating device tree: done
71[840] booting linux @ 0x80008000, ramdisk @ 0x80008000 (0), tags/device tree @ 0x81e00000
72[ 0.000000] Booting Linux on physical CPU 0x0
73[ 0.000000] Initializing cgroup subsys cpu
74[ 0.000000] Initializing cgroup subsys cpuacct
75[ 0.000000] Linux version 3.18.20 (xiaoqinqin@ubuntu-241) (gcc version 4.9.2 (GCC) ) #1 PREEMPT Thu Aug 16 17:16:19 CST 2018
76[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
77[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
78[ 0.000000] Machine model: Qualcomm Technologies, Inc. MDM 9607 MTP
79[ 0.000000] Early serial console at I/O port 0x0 (options '')
80[ 0.000000] bootconsole [uart0] enabled
81[ 0.000000] Reserved memory: reserved region for node 'modem_adsp_region@0': base 0x82a00000, size 81 MiB
82[ 0.000000] Reserved memory: reserved region for node 'cnss_debug_region@0': base 0x87b00000, size 1 MiB
83[ 0.000000] Reserved memory: reserved region for node 'external_image_region@0': base 0x87c00000, size 4 MiB
84[ 0.000000] Removed memory: created DMA memory pool at 0x82a00000, size 81 MiB
85[ 0.000000] Reserved memory: initialized node modem_adsp_region@0, compatible id removed-dma-pool
86[ 0.000000] Removed memory: created DMA memory pool at 0x87b00000, size 1 MiB
87[ 0.000000] Reserved memory: initialized node cnss_debug_region@0, compatible id removed-dma-pool
88[ 0.000000] Removed memory: created DMA memory pool at 0x87c00000, size 4 MiB
89[ 0.000000] Reserved memory: initialized node external_image_region@0, compatible id removed-dma-pool
90[ 0.000000] Reserved memory: allocated memory for 'audio_region@0' node: base 0x8fc00000, size 4 MiB
91[ 0.000000] Reserved memory: created CMA memory pool at 0x8fc00000, size 4 MiB
92[ 0.000000] Reserved memory: initialized node audio_region@0, compatible id shared-dma-pool
93[ 0.000000] cma: Reserved 4 MiB at 0x8f800000
94[ 0.000000] Memory policy: Data cache writeback
95[ 0.000000] CPU: All CPU(s) started in SVC mode.
96[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 63616
97[ 0.000000] Kernel command line: noinitrd rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1 earlycon=msm_hsl_uart,0x78b3000 androidboot.serialno=124346 androidboot.baseband=msm rootfstype=ubifs rootflags=bulk_read root=ubi0:rootfs ubi.mtd=23
98[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
99[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
100[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
101[ 0.000000] Memory: 148036K/257024K available (8204K kernel code, 1096K rwdata, 3668K rodata, 348K init, 1156K bss, 108988K reserved)
102[ 0.000000] Virtual kernel memory layout:
103[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
104[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
105[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
106[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
107[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
108[ 0.000000] .text : 0xc0008000 - 0xc0ba025c (11873 kB)
109[ 0.000000] .init : 0xc0ba1000 - 0xc0bf8000 ( 348 kB)
110[ 0.000000] .data : 0xc0bf8000 - 0xc0d0a240 (1097 kB)
111[ 0.000000] .bss : 0xc0d0a304 - 0xc0e2b4f0 (1157 kB)
112[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
113[ 0.000000] Preemptible hierarchical RCU implementation.
114[ 0.000000] NR_IRQS:16 nr_irqs:16 16
115[ 0.000000] kmemleak: Kernel memory leak detector disabled
116[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
117[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
118[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
119[ 0.000000] MPM 1 irq mapping errored -517
120[ 0.000000] Architected mmio timer(s) running at 19.20MHz (virt).
121[ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
122[ 0.007971] Switching to timer-based delay loop, resolution 52ns
123[ 0.013965] Switched to clocksource arch_mem_counter
124[ 0.019793] Console: colour dummy device 80x30
125[ 0.023345] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
126[ 0.033661] pid_max: default: 32768 minimum: 301
127[ 0.038523] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
128[ 0.044917] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
129[ 0.052829] Initializing cgroup subsys freezer
130[ 0.056400] Initializing cgroup subsys debug
131[ 0.060609] CPU: Testing write buffer coherency: ok
132[ 0.065957] Setting up static identity map for 0x807d0a30 - 0x807d0a88
133[ 0.073373]
134[ 0.073373] **********************************************************
135[ 0.080442] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
136[ 0.086889] ** **
137[ 0.093364] ** trace_printk() being used. Allocating extra memory. **
138[ 0.099903] ** **
139[ 0.106413] ** This means that this is a DEBUG kernel and it is **
140[ 0.112895] ** unsafe for produciton use. **
141[ 0.119434] ** **
142[ 0.125943] ** If you see this message and you are not debugging **
143[ 0.132426] ** the kernel, report this immediately to your vendor! **
144[ 0.138964] ** **
145[ 0.145474] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
146[ 0.151958] **********************************************************
147[ 0.187609] MSM Memory Dump
148Format: Log Type - Time(microsec) - Message - Optional Info
149Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
150S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2-00059
151S - IMAGE_VARIANT_STRING=LAATANAZA
152S - OEM_IMAGE_VERSION_STRING=ubuntu-247
153S - Boot Config, 0x000000e0
154B - 1216 - PBL, Start
155B - 3723 - bootable_media_detect_entry, Start
156B - 4423 - bootable_media_detect_success, Start
157B - 4428 - elf_loader_entry, Start
158B - 7881 - auth_hash_seg_entry, Start
159B - 8102 - auth_hash_seg_exit, Start
160B - 56349 - elf_segs_hash_verify_entry, Start
161B - 101446 - PBL, End
162B - 92049 - SBL1, Start
163B - 140544 - pm_device_init, Start
164B - 157959 - PM_SET_VAL:Skip
165D - 15799 - pm_device_init, Delta
166B - 158966 - boot_config_data_table_init, Start
167D - 174917 - boot_config_data_table_init, Delta - (420 Bytes)
168B - 337421 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
169B - 343887 - sbl1_ddr_set_params, Start
170B - 347364 - cpr_init, Start
171D - 0 - cpr_init, Delta
172B - 353007 - Pre_DDR_clock_init, Start
173D - 244 - Pre_DDR_clock_init, Delta
174D - 0 - sbl1_ddr_set_params, Delta
175B - 365786 - pm_driver_init, Start
176D - 4605 - pm_driver_init, Delta
177B - 378535 - sbl1_qhsusb_al_do_fast_enum, Start
178B - 378840 - clock_init, Start
179D - 152 - clock_init, Delta
180B - 382836 - boot_flash_init, Start
181D - 38033 - boot_flash_init, Delta
182B - 487573 - Image Load, Start
183D - 60512 - QSEE Image Loaded, Delta - (487948 Bytes)
184B - 548115 - Image Load, Start
185D - 732 - SEC Image Loaded, Delta - (2048 Bytes)
186B - 556442 - sbl1_efs_handle_cookies, Start
187D - 0 - sbl1_efs_handle_cookies, Delta
188B - 563213 - Image Load, Start
189D - 31903 - RPM Image Loaded, Delta - (151348 Bytes)
190B - 595177 - Image Load, Start
191D - 27419 - APPSBL Image Loaded, Delta - (182652 Bytes)
192B - 622657 - QSEE Execution, Start
193D - 122 - QSEE Execution, Delta
194B - 628361 - SBL1, End
195D - 538599 - SBL1, Delta
196S - Throughput, 3000 KB/s (824416 Bytes, 274160 us)
197S - DDR Frequency, 240 MHz
198 Android Bootloader - UART_DM Initialized!!!
199[0] welcome to lk
200
201[0] SCM call: 0x2000601 failed with :fffffffc
202[0] Failed to initialize SCM
203[10] platform_init()
204[10] target_init()
205[10] smem ptable found: ver: 4 len: 24
206[10] ERROR: No devinfo partition found
207[10] Neither 'config' nor 'frp' partition found
208[20] FASTBOOT_KEY_GPIO_ID=37 ret=0
209[70] FASTBOOT_KEY_GPIO_ID=37 ret=1
210[70] buff0 is ff
211[80] Loading (boot) image (5980160): start
212[670] Loading (boot) image (5980160): done
213[670] DTB Total entry: 25, DTB version: 3
214[680] Using DTB entry 0x00000129/00010000/0x00000008/0 for device 0x00000129/00010000/0x00010008/0
215[690] cmdline: noinitrd rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1 earlycon=msm_hsl_uart,0x78b3000 androidboot.serialno=124346 androidboot.baseband=msm rootfstype=ubifs rootflags=bul[720] Updating device tree: start
216[840] Updating device tree: done
217[840] booting linux @ 0x80008000, ramdisk @ 0x80008000 (0), tags/device tree @ 0x81e00000
218[ 0.000000] Booting Linux on physical CPU 0x0
219[ 0.000000] Initializing cgroup subsys cpu
220[ 0.000000] Initializing cgroup subsys cpuacct
221[ 0.000000] Linux version 3.18.20 (xiaoqinqin@ubuntu-241) (gcc version 4.9.2 (GCC) ) #1 PREEMPT Thu Aug 16 17:16:19 CST 2018
222[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
223[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
224[ 0.000000] Machine model: Qualcomm Technologies, Inc. MDM 9607 MTP
225[ 0.000000] Early serial console at I/O port 0x0 (options '')
226[ 0.000000] bootconsole [uart0] enabled
227[ 0.000000] Reserved memory: reserved region for node 'modem_adsp_region@0': base 0x82a00000, size 81 MiB
228[ 0.000000] Reserved memory: reserved region for node 'cnss_debug_region@0': base 0x87b00000, size 1 MiB
229[ 0.000000] Reserved memory: reserved region for node 'external_image_region@0': base 0x87c00000, size 4 MiB
230[ 0.000000] Removed memory: created DMA memory pool at 0x82a00000, size 81 MiB
231[ 0.000000] Reserved memory: initialized node modem_adsp_region@0, compatible id removed-dma-pool
232[ 0.000000] Removed memory: created DMA memory pool at 0x87b00000, size 1 MiB
233[ 0.000000] Reserved memory: initialized node cnss_debug_region@0, compatible id removed-dma-pool
234[ 0.000000] Removed memory: created DMA memory pool at 0x87c00000, size 4 MiB
235[ 0.000000] Reserved memory: initialized node external_image_region@0, compatible id removed-dma-pool
236[ 0.000000] Reserved memory: allocated memory for 'audio_region@0' node: base 0x8fc00000, size 4 MiB
237[ 0.000000] Reserved memory: created CMA memory pool at 0x8fc00000, size 4 MiB
238[ 0.000000] Reserved memory: initialized node audio_region@0, compatible id shared-dma-pool
239[ 0.000000] cma: Reserved 4 MiB at 0x8f800000
240[ 0.000000] Memory policy: Data cache writeback
241[ 0.000000] CPU: All CPU(s) started in SVC mode.
242[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 63616
243[ 0.000000] Kernel command line: noinitrd rw console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1 earlycon=msm_hsl_uart,0x78b3000 androidboot.serialno=124346 androidboot.baseband=msm rootfstype=ubifs rootflags=bulk_read root=ubi0:rootfs ubi.mtd=23
244[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
245[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
246[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
247[ 0.000000] Memory: 148036K/257024K available (8204K kernel code, 1096K rwdata, 3668K rodata, 348K init, 1156K bss, 108988K reserved)
248[ 0.000000] Virtual kernel memory layout:
249[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
250[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
251[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
252[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
253[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
254[ 0.000000] .text : 0xc0008000 - 0xc0ba025c (11873 kB)
255[ 0.000000] .init : 0xc0ba1000 - 0xc0bf8000 ( 348 kB)
256[ 0.000000] .data : 0xc0bf8000 - 0xc0d0a240 (1097 kB)
257[ 0.000000] .bss : 0xc0d0a304 - 0xc0e2b4f0 (1157 kB)
258[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
259[ 0.000000] Preemptible hierarchical RCU implementation.
260[ 0.000000] NR_IRQS:16 nr_irqs:16 16
261[ 0.000000] kmemleak: Kernel memory leak detector disabled
262[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
263[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
264[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
265[ 0.000000] MPM 1 irq mapping errored -517
266[ 0.000000] Architected mmio timer(s) running at 19.20MHz (virt).
267[ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
268[ 0.007971] Switching to timer-based delay loop, resolution 52ns
269[ 0.013967] Switched to clocksource arch_mem_counter
270[ 0.019799] Console: colour dummy device 80x30
271[ 0.023344] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
272[ 0.033662] pid_max: default: 32768 minimum: 301
273[ 0.038526] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
274[ 0.044918] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
275[ 0.052843] Initializing cgroup subsys freezer
276[ 0.056400] Initializing cgroup subsys debug
277[ 0.060608] CPU: Testing write buffer coherency: ok
278[ 0.065955] Setting up static identity map for 0x807d0a30 - 0x807d0a88
279[ 0.073363]
280[ 0.073363] **********************************************************
281[ 0.080430] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
282[ 0.086876] ** **
283[ 0.093353] ** trace_printk() being used. Allocating extra memory. **
284[ 0.099894] ** **
285[ 0.106403] ** This means that this is a DEBUG kernel and it is **
286[ 0.112885] ** unsafe for produciton use. **
287[ 0.119422] ** **
288[ 0.125934] ** If you see this message and you are not debugging **
289[ 0.132415] ** the kernel, report this immediately to your vendor! **
290[ 0.138954] ** **
291[ 0.145465] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
292[ 0.151947] **********************************************************
293[ 0.187606] MSM Memory Dump base table set up
294[ 0.190994] MSM Memory Dump apps data table set up
295[ 0.208186] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
296[ 0.221977] pinctrl core: initialized pinctrl subsystem
297[ 0.226929] regulator-dummy: no parameters
298[ 0.278755] NET: Registered protocol family 16
299[ 0.294409] DMA: preallocated 256 KiB pool for atomic coherent allocations
300[ 0.354034] cpuidle: using governor ladder
301[ 0.384026] cpuidle: using governor menu
302[ 0.414026] cpuidle: using governor qcom
303[ 0.429143] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
304[ 0.435552] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
305[ 0.454147] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
306[ 0.463591] platform 4080000.qcom,mss: assigned reserved memory node modem_adsp_region@0
307[ 0.471462] mem_acc_corner: 0 <--> 0 mV
308[ 0.476336] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
309[ 0.483303] hw-breakpoint: maximum watchpoint size is 8 bytes.
310[ 0.491215] __of_mpm_init(): MPM driver mapping exists
311[ 0.496089] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
312[ 0.502087] msm_rpm_dev_probe: APSS-RPM communication over SMD
313[ 0.507962] smd_open() before smd_init()
314[ 0.512601] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
315[ 0.521313] smd_channel_probe_now: allocation table not initialized
316[ 0.529852] mdm9607_s1: 1050 <--> 1350 mV at 1225 mV normal idle
317[ 0.535463] spm_regulator_probe: name=mdm9607_s1, range=LV, voltage=1225000 uV, mode=AUTO, step rate=4800 uV/us
318[ 0.545686] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000)
319[ 0.552073] cpr_read_fuse_revision: apc_corner: fuse revision = 2
320[ 0.558155] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x9418d32e9682fc3, speed_bits = 4
321[ 0.566800] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1100000 1237500] uV
322[ 0.574012] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
323[ 0.581615] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1150000] uV
324[ 0.590032] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
325[ 0.595020] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
326[ 0.601065] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
327[ 0.607966] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
328[ 0.613357] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
329[ 0.619682] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
330[ 0.629134] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,core-limit-temp. err=-22. KTM continues
331[ 0.641580] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
332[ 0.655417] msm_thermal:get_kernel_cluster_info CPU0 topology not initialized.
333[ 0.662638] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
334[ 0.669819] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
335[ 0.677465] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
336[ 0.691085] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
337[ 0.704606] sps:sps is ready.
338[ 0.709085] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
339[ 0.714972] msm_rpm_dev_probe: APSS-RPM communication over SMD
340[ 0.721979] mdm9607_s2: 750 <--> 1275 mV at 750 mV normal idle
341[ 0.728253] mdm9607_s3_level: 0 <--> 0 mV at 0 mV normal idle
342[ 0.733811] mdm9607_s3_level_ao: 0 <--> 0 mV at 0 mV normal idle
343[ 0.740047] mdm9607_s3_floor_level: 0 <--> 0 mV at 0 mV normal idle
344[ 0.746275] mdm9607_s3_level_so: 0 <--> 0 mV at 0 mV normal idle
345[ 0.752548] mdm9607_s4: 1800 <--> 1950 mV at 1800 mV normal idle
346[ 0.758702] mdm9607_l1: 1250 mV normal idle
347[ 0.762945] mdm9607_l2: 1800 mV normal idle
348[ 0.767275] mdm9607_l3: 1800 mV normal idle
349[ 0.771558] mdm9607_l4: 3075 mV normal idle
350[ 0.775856] mdm9607_l5: 1700 <--> 3050 mV at 1700 mV normal idle
351[ 0.781965] mdm9607_l6: 1700 <--> 3050 mV at 1700 mV normal idle
352[ 0.788094] mdm9607_l7: 1700 <--> 1900 mV at 1700 mV normal idle
353[ 0.794290] mdm9607_l8: 1800 mV normal idle
354[ 0.798527] mdm9607_l9: 1200 <--> 1250 mV at 1200 mV normal idle
355[ 0.804711] mdm9607_l10: 1050 mV normal idle
356[ 0.809096] mdm9607_l11: 1800 mV normal idle
357[ 0.813475] mdm9607_l12_level: 0 <--> 0 mV at 0 mV normal idle
358[ 0.819232] mdm9607_l12_level_ao: 0 <--> 0 mV at 0 mV normal idle
359[ 0.825320] mdm9607_l12_level_so: 0 <--> 0 mV at 0 mV normal idle
360[ 0.831742] mdm9607_l13: 1800 <--> 2850 mV at 2850 mV normal idle
361[ 0.838027] mdm9607_l14: 2650 <--> 3000 mV at 2650 mV normal idle
362[ 0.843542] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
363[ 0.850031] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000)
364[ 0.856713] cpr_read_fuse_revision: apc_corner: fuse revision = 2
365[ 0.862710] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x9418d32e9682fc3, speed_bits = 4
366[ 0.871412] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1100000 1237500] uV
367[ 0.878623] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
368[ 0.886257] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1150000] uV
369[ 0.893954] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 3
370[ 0.901567] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
371[ 0.908504] cpr_init_cpr_efuse: apc_corner: [row:65] = 0x158002b32b338f
372[ 0.915086] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0
373[ 0.921039] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 0, target quot = 691
374[ 0.928794] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 0, target quot = 691
375[ 0.936517] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 0, target quot = 911
376[ 0.944464] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
377[ 0.951380] apc_corner: 0 <--> 0 mV
378[ 0.955041] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
379[ 0.960088] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
380[ 0.966329] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
381[ 0.973161] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
382[ 0.978612] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
383[ 0.984792] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
384[ 0.991797] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,core-limit-temp. err=-22. KTM continues
385[ 1.004705] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
386[ 1.018564] msm_thermal:get_kernel_cluster_info CPU0 topology not initialized.
387[ 1.026314] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
388[ 1.032582] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
389[ 1.040869] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
390[ 1.048139] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
391[ 1.055517] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
392[ 1.063009] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
393[ 1.070490] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
394[ 1.089954] qcom,gcc-mdm9607 1800000.qcom,gcc: Registered GCC clocks
395[ 1.095804] clock-a7 b010008.qcom,clock-a7: Speed bin: 4 PVS Version: 0
396[ 1.101956] a7ssmux: set OPP pair(400000000 Hz: 1 uV) on cpu0
397[ 1.107700] a7ssmux: set OPP pair(1305600000 Hz: 7 uV) on cpu0
398[ 1.115413] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
399[ 1.120211] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
400[ 1.129572] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
401[ 1.139673] kworker/u2:2 (23) used greatest stack depth: 6940 bytes left
402[ 1.145867] kworker/u2:2 (24) used greatest stack depth: 6900 bytes left
403[ 1.153021] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
404[ 1.158097] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
405[ 1.167038] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
406[ 1.249326] KPI: Bootloader start count = 23097
407[ 1.252820] KPI: Bootloader end count = 51346
408[ 1.257321] KPI: Bootloader display count = 3881112705
409[ 1.262399] KPI: Bootloader load kernel count = 19442
410[ 1.267369] KPI: Kernel MPM timestamp = 120549
411[ 1.271743] KPI: Kernel MPM Clock frequency = 32768
412[ 1.276674] socinfo_print: v0.10, id=297, ver=1.0, raw_id=72, raw_ver=0, hw_plat=8, hw_plat_ver=65536
413[ 1.276674] accessory_chip=0, hw_plat_subtype=0, pmic_model=65539, pmic_die_revision=131074 foundry_id=0 serial_number=3915919299
414[ 1.298370] sdcard_ext_vreg: no parameters
415[ 1.302174] rome_vreg: no parameters
416[ 1.305910] emac_lan_vreg: no parameters
417[ 1.310742] SCSI subsystem initialized
418[ 1.313734] usbcore: registered new interface driver usbfs
419[ 1.319141] usbcore: registered new interface driver hub
420[ 1.324827] usbcore: registered new device driver usb
421[ 1.330568] cpufreq: driver msm up and running
422[ 1.334653] platform soc:qcom,ion:qcom,ion-heap@28: assigned reserved memory node audio_region@0
423[ 1.343143] ION heap system created
424[ 1.346507] ION heap audio created at 0x8fc00000 with size 400000
425[ 1.352705] msm_bus_fabric_init_driver
426[ 1.365976] qcom,qpnp-power-on qpnp-power-on-cf31fe00: PMIC@SID0 Power-on reason: Triggered from CBL (external power supply) and 'cold' boot
427[ 1.377623] qcom,qpnp-power-on qpnp-power-on-cf31fe00: PMIC@SID0: Unknown power-off reason
428[ 1.386126] input: qpnp_pon as /devices/virtual/input/input0
429[ 1.391955] PMIC@SID0: PM8019 v2.2 options: 3, 2, 2, 2
430[ 1.397914] Advanced Linux Sound Architecture Driver Initialized.
431[ 1.403800] Bluetooth: Core ver 2.19
432[ 1.406719] NET: Registered protocol family 31
433[ 1.410955] Bluetooth: HCI device and connection manager initialized
434[ 1.417348] Bluetooth: HCI socket layer initialized
435[ 1.422159] Bluetooth: L2CAP socket layer initialized
436[ 1.427252] Bluetooth: SCO socket layer initialized
437[ 1.432381] cfg80211: Calling CRDA to update world regulatory domain
438[ 1.439316] Switched to clocksource arch_mem_counter
439[ 1.444122] cfg80211: World regulatory domain updated:
440[ 1.448455] cfg80211: DFS Master region: unset
441[ 1.452796] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
442[ 1.484107] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
443[ 1.491077] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
444[ 1.511492] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
445[ 1.518978] aw9523b_chip1_probe start
446[ 1.524046] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
447[ 1.531006] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
448[ 1.554007] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
449[ 1.560967] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
450[ 1.584008] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
451[ 1.629632] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x1 (ok)
452[ 1.657598] aw9523b_chip1-CONFIG_PORT0_DIRECT return 0
453[ 1.662163] aw9523b_chip1-CONFIG_PORT1_DIRECT return 8
454[ 1.667409] aw9523b_chip1-MODE_SWITCH_PORT0 return ff
455[ 1.672489] aw9523b_chip1-MODE_SWITCH_PORT1 return ff
456[ 1.677647] aw9523b_chip1-INT_PORT0 return ff
457[ 1.682036] aw9523b_chip1-INT_PORT1 return f7
458[ 1.686500] aw9523b_chip1-openExDevicePower: get_dev_id 23
459[ 1.707978] input: ble_int as /devices/virtual/input/input1
460[ 1.713279] aw9523b_chip1_probe end, power_gpio(14), interruptGpio(26), gpioIrq(321), chip_client_name(aw9523b_chip1)
461[ 1.728805] NET: Registered protocol family 2
462[ 1.732822] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
463[ 1.739252] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
464[ 1.745575] TCP: Hash tables configured (established 2048 bind 2048)
465[ 1.751924] TCP: reno registered
466[ 1.755118] UDP hash table entries: 256 (order: 1, 12288 bytes)
467[ 1.760980] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
468[ 1.767547] NET: Registered protocol family 1
469[ 1.773906] futex hash table entries: 256 (order: 0, 7168 bytes)
470[ 1.790241] msgmni has been set to 305
471[ 1.794853] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
472[ 1.801251] io scheduler noop registered
473[ 1.805318] io scheduler deadline registered
474[ 1.809622] io scheduler cfq registered (default)
475[ 1.822067] msm_rpm_log_probe: OK
476[ 1.826444] enter tpl5010_probe
477[ 1.828837] input: tpl5010 as /devices/virtual/input/input2
478[ 1.874047] leave tpl5010_probe
479[ 1.877620] msm_serial_hs module loaded
480[ 1.880884] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
481[ 1.886269] AXI: get_pdata(): Error: Client name not found
482[ 1.891565] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
483[ 1.901064] msm_serial_hsl_probe: Bus scaling is disabled
484[ 1.906590] 78b3000.serial: ttyHSL0 at MMIO 0x78b3000 (irq = 153, base_baud = 460800)[ 1.915094] msm_hsl_console_setup: console setup on port #0
485[ 1.919710] console [ttyHSL0] enabled
486[ 1.919710] console [ttyHSL0] enabled
487[ 1.926989] bootconsole [uart0] disabled
488[ 1.926989] bootconsole [uart0] disabled
489[ 1.935244] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
490[ 1.940413] AXI: get_pdata(): Error: Client name not found
491[ 1.945910] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
492[ 1.955516] msm_serial_hsl_probe: Bus scaling is disabled
493[ 1.960851] 78af000.serial: ttyHSL1 at MMIO 0x78af000 (irq = 139, base_baud = 460800) is a MSM
494[ 1.969818] msm_serial_hsl_probe: detected port #2 (ttyHSL2)
495[ 1.975015] AXI: get_pdata(): Error: Client name not found
496[ 1.980410] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
497[ 1.989906] msm_serial_hsl_probe: Bus scaling is disabled
498[ 1.995408] 78b1000.serial: ttyHSL2 at MMIO 0x78b1000 (irq = 151, base_baud = 460800) is a MSM
499[ 2.004349] msm_serial_hsl_probe: detected port #3 (ttyHSL3)
500[ 2.009507] AXI: get_pdata(): Error: Client name not found
501[ 2.015008] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
502[ 2.024450] msm_serial_hsl_probe: Bus scaling is disabled
503[ 2.029917] 78b2000.serial: ttyHSL3 at MMIO 0x78b2000 (irq = 152, base_baud = 460800) is a MSM
504[ 2.038966] msm_serial_hsl_init: driver initialized
505[ 2.057068] wakeup_report_probe
506[ 2.059243] rc:0
507[ 2.061262] Error: Driver 'wakeup_report' is already registered, aborting...
508[ 2.068505] wakeup_out_probe
509[ 2.071041] [yll]-get wakeup_out gpio = 6
510[ 2.075171] Error: Driver 'wakeup_out' is already registered, aborting...
511[ 2.089207] brd: module loaded
512[ 2.094998] loop: module loaded
513[ 2.099074] i2c-core: driver [tabla-i2c-core] using legacy suspend method
514[ 2.104886] i2c-core: driver [tabla-i2c-core] using legacy resume method
515[ 2.111649] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
516[ 2.118493] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
517[ 2.125492] i2c-core: driver [tasha-i2c-core] using legacy suspend method
518[ 2.132078] i2c-core: driver [tasha-i2c-core] using legacy resume method
519[ 2.139024] SCSI Media Changer driver v0.25
520[ 2.147700] sps: BAM device 0x07984000 is not registered yet.
521[ 2.153056] sps:BAM 0x07984000 is registered.
522[ 2.156671] msm_nand_bam_init: msm_nand_bam_init: BAM device registered: bam_handle 0xceae8c00
523[ 2.165686] sps:BAM 0x07984000 (va:0xd09a0000) enabled: ver:0x18, number of pipes:7
524[ 2.175551] msm_nand_parse_smem_ptable: Parsing partition table info from SMEM
525[ 2.181804] msm_nand_parse_smem_ptable: SMEM partition table found: ver: 4 len: 24
526[ 2.189376] msm_nand_version_check: nand_major:1, nand_minor:5, qpic_major:1, qpic_minor:5
527[ 2.197623] msm_nand_scan: NAND Id: 0x2690ac98 Buswidth: 8Bits Density: 512 MByte
528[ 2.205039] msm_nand_scan: pagesize: 4096 Erasesize: 262144 oobsize: 128 (in Bytes)
529[ 2.212640] msm_nand_scan: BCH ECC: 8 Bit
530[ 2.216673] msm_nand_scan: CFG0: 0x290409c0, CFG1: 0x08045d5c
531[ 2.216673] RAWCFG0: 0x2b8401c0, RAWCFG1: 0x0005055d
532[ 2.216673] ECCBUFCFG: 0x00000203, ECCBCHCFG: 0x42040d10
533[ 2.216673] RAWECCCFG: 0x42000d11, BAD BLOCK BYTE: 0x00000175
534[ 2.243067] Creating 24 MTD partitions on "7980000.nand":
535[ 2.248446] 0x000000000000-0x000000280000 : "sbl"
536[ 2.254132] 0x000000280000-0x000000500000 : "mibib"
537[ 2.258859] 0x000000500000-0x000001100000 : "efs2"
538[ 2.263621] 0x000001100000-0x000001380000 : "backup_efs"
539[ 2.268969] 0x000001380000-0x0000014c0000 : "tz"
540[ 2.273570] 0x0000014c0000-0x0000015c0000 : "rpm"
541[ 2.278296] 0x0000015c0000-0x0000016c0000 : "aboot"
542[ 2.283097] 0x0000016c0000-0x000001ec0000 : "boot"
543[ 2.287866] 0x000001ec0000-0x000001f80000 : "scrub"
544[ 2.292660] 0x000001f80000-0x000006500000 : "modem"
545[ 2.297618] 0x000006500000-0x000006680000 : "misc"
546[ 2.302331] 0x000006680000-0x000006e80000 : "recovery"
547[ 2.307533] 0x000006e80000-0x000007000000 : "cache"
548[ 2.312324] 0x000007000000-0x000008700000 : "recoveryfs"
549[ 2.317700] 0x000008700000-0x000008780000 : "sec"
550[ 2.322352] 0x000008780000-0x000008880000 : "aboot_bak"
551[ 2.327542] 0x000008880000-0x000009080000 : "boot_bak"
552[ 2.332576] 0x000009080000-0x00000c380000 : "sys_bak"
553[ 2.337898] 0x00000c380000-0x00000c4c0000 : "tz_bak"
554[ 2.342759] 0x00000c4c0000-0x00000c5c0000 : "rpm_bak"
555[ 2.347789] 0x00000c5c0000-0x00000c800000 : "efs2_bak"
556[ 2.352852] 0x00000c800000-0x000010e40000 : "usrdata"
557[ 2.357982] 0x000010e40000-0x000014080000 : "usrlog"
558[ 2.362877] 0x000014080000-0x000020000000 : "system"
559[ 2.367880] msm_nand_probe: NANDc phys addr 0x7980000, BAM phys addr 0x7984000, BAM IRQ 164
560[ 2.375305] msm_nand_probe: Allocated DMA buffer at virt_addr 0xcf850000, phys_addr 0x8f850000
561[ 2.386634] PPP generic driver version 2.4.2
562[ 2.396096] ------------[ cut here ]------------
563[ 2.399692] WARNING: CPU: 0 PID: 1 at /home/xiaoqinqin/SLT181-ouzhou_PV/mdm9607-le-1-0_amss_standard_oem/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607/kernel-source/arch/arm/mm/ioremap.c:302 __arm_ioremap_pfn_caller+0xfc/0x200()
564[ 2.420646] Modules linked in:
565[ 2.423643] CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.20 #1
566[ 2.429510] [<c0013f5c>] (unwind_backtrace) from [<c0011f94>] (show_stack+0x10/0x14)
567[ 2.437224] [<c0011f94>] (show_stack) from [<c001d50c>] (warn_slowpath_common+0x68/0x88)
568[ 2.445295] [<c001d50c>] (warn_slowpath_common) from [<c001d5bc>] (warn_slowpath_null+0x18/0x20)
569[ 2.454059] [<c001d5bc>] (warn_slowpath_null) from [<c0017cdc>] (__arm_ioremap_pfn_caller+0xfc/0x200)
570[ 2.463226] [<c0017cdc>] (__arm_ioremap_pfn_caller) from [<c0017e2c>] (__arm_ioremap_caller+0x4c/0x54)
571[ 2.472553] [<c0017e2c>] (__arm_ioremap_caller) from [<c030a10c>] (cnss_sdio_probe+0x620/0x894)
572[ 2.481232] [<c030a10c>] (cnss_sdio_probe) from [<c0281bf4>] (platform_drv_probe+0x30/0x7c)
573[ 2.489564] [<c0281bf4>] (platform_drv_probe) from [<c0280210>] (driver_probe_device+0x134/0x344)
574[ 2.498419] [<c0280210>] (driver_probe_device) from [<c02804cc>] (__driver_attach+0x68/0x8c)
575[ 2.506837] [<c02804cc>] (__driver_attach) from [<c027e820>] (bus_for_each_dev+0x6c/0x90)
576[ 2.515000] [<c027e820>] (bus_for_each_dev) from [<c027f8d0>] (bus_add_driver+0x104/0x1f4)
577[ 2.523206] [<c027f8d0>] (bus_add_driver) from [<c0280d1c>] (driver_register+0x9c/0xe0)
578[ 2.531225] [<c0280d1c>] (driver_register) from [<c0008a8c>] (do_one_initcall+0x19c/0x1dc)
579[ 2.539476] [<c0008a8c>] (do_one_initcall) from [<c0ba1d94>] (kernel_init_freeable+0xf0/0x1b0)
580[ 2.548073] [<c0ba1d94>] (kernel_init_freeable) from [<c07c625c>] (kernel_init+0x8/0xe4)
581[ 2.556143] [<c07c625c>] (kernel_init) from [<c000e760>] (ret_from_fork+0x14/0x34)
582[ 2.563676] ---[ end trace 27a9a6aac5237b5f ]---
583[ 2.568298] cnss_configure_ramdump: ramdump addr: (null), phys: 0x87a00000 subsys:'AR6320'
584[ 2.576707] cnss_configure_ramdump: CNSS ramdump will not be collected
585[ 2.583441] cnss_sdio 87a00000.qcom,cnss-sdio: CNSS SDIO Driver registered
586[ 2.592700] msm_otg 78d9000.usb: msm_otg probe
587[ 2.598616] msm_otg 78d9000.usb: OTG regs = d08f8000
588[ 2.605164] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
589[ 2.611053] ehci-msm: Qualcomm On-Chip EHCI Host Controller
590[ 2.616682] usbcore: registered new interface driver cdc_acm
591[ 2.621855] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
592[ 2.629987] usbcore: registered new interface driver usb-storage
593[ 2.635920] usbcore: registered new interface driver ums-alauda
594[ 2.641779] usbcore: registered new interface driver ums-cypress
595[ 2.647810] usbcore: registered new interface driver ums-datafab
596[ 2.653785] usbcore: registered new interface driver ums-freecom
597[ 2.659794] usbcore: registered new interface driver ums-isd200
598[ 2.665691] usbcore: registered new interface driver ums-jumpshot
599[ 2.671741] usbcore: registered new interface driver ums-karma
600[ 2.677586] usbcore: registered new interface driver ums-onetouch
601[ 2.683616] usbcore: registered new interface driver ums-sddr09
602[ 2.689570] usbcore: registered new interface driver ums-sddr55
603[ 2.695460] usbcore: registered new interface driver ums-usbat
604[ 2.701248] usbcore: registered new interface driver usb_ehset_test
605[ 2.708992] gbridge_init: gbridge_init successs.
606[ 2.714666] msm_otg 78d9000.usb: phy_reset: success
607[ 2.718743] bmi160 4-0068: BMI160 i2c function probe entrance
608[ 2.724915] bmi160 4-0068: Regulator client_data->vdd enable success!
609[ 2.730794] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0x4 (ok)
610[ 2.739095] (NULL device *): Bosch Sensortec Device detected, HW IC name: BMI160C3
611[ 2.746430] input: bmi160_accel as /devices/virtual/input/input3
612[ 2.752223] bmi160 4-0068: bmi160 input_accel register successfully!
613[ 2.758704] input: bmi160_gyro as /devices/virtual/input/input4
614[ 2.764502] bmi160 4-0068: bmi160 input register successfully, bmi160_gyro!
615[ 2.771801] dev->platform_data = NULL
616[ 2.774974] client_data->bst_pd = NULL
617[ 2.780340] bmi160 4-0068:
618[ 2.780340] From 0x00:
619[ 2.785656] bmi160 4-0068: d3 21 00 00 00 00 00 00 00 00 00 00 00 00 00 00
620[ 2.785656] 00 00 00 00 00 00 00 00 dd 03 02 10 00 00 00 00
621[ 2.785656] 00 80 00 00
622[ 2.799809] sps: BAM device 0x07884000 is not registered yet.
623[ 2.805976] sps:BAM 0x07884000 is registered.
624[ 2.809775] sps:BAM 0x07884000 (va:0xd09c0000) enabled: ver:0x18, number of pipes:24
625[ 2.821735] bmi160 4-0068:
626[ 2.821735] From 0x40:
627[ 2.826059] bmi160 4-0068:
628[ 2.826059] 28 03 28 00 0b 88 80 10 00 00 00 20 80 42 4c 00
629[ 2.826059] 00 00 00 00 00 00 00 00 00 00 07 30 81 0b c0 00
630[ 2.826059] 14 14 24 04 0a 18 48 08 11 00 00 00 00 00 00 00
631[ 2.826059] 00 00 00 00 26 4c 15 00 00 00 15 03 00 00 00 00
632[ 2.826059] d3 21 00 00 00 00 00 00 00 00 00 00 00 00 00 00
633[ 2.826059] 00 00 00 00 00 00
634[ 2.867018] bmi160 4-0068: BMI160 qpio number:29
635[ 2.949349] bmi160 4-0068: sensor_time:65535, 65536, 2560000
636[ 2.954076] bmi160 4-0068: sensor bmi160 probed successfully
637[ 2.959671] i2c-core: driver [bmi160] using legacy suspend method
638[ 2.965729] i2c-core: driver [bmi160] using legacy resume method
639[ 2.972601] aw9523b_chip2_probe start
640[ 3.046055] controller_power(4)
641[ 3.048405] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x58 MSTR_STS:0x0d1300c8 OPER:0x00000090
642[ 3.084404] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x58 MSTR_STS:0x0d1300c8 OPER:0x00000010
643[ 3.099157] aw9523b_chip2 4-0058: I2C read error
644[ 3.124143] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x58 MSTR_STS:0x0d1300c8 OPER:0x00000010
645[ 3.138896] aw9523b_chip2 4-0058: I2C read error
646[ 3.163838] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x58 MSTR_STS:0x0d1300c8 OPER:0x00000010
647[ 3.178590] aw9523b_chip2 4-0058: I2C read error
648[ 3.203533] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x58 MSTR_STS:0x0d1300c8 OPER:0x00000010
649[ 3.218341] aw9523b_chip2 4-0058: I2C read error
650[ 3.243266] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x58 MSTR_STS:0x0d1300c8 OPER:0x00000010
651[ 3.258014] aw9523b_chip2 4-0058: I2C read error
652[ 3.282761] aw9523b_chip2 4-0058: get i2c device id failed !
653[ 3.287503] aw9523b_chip2 4-0058: init_ext_dev error !
654[ 3.292604] aw9523b_chip2: probe of 4-0058 failed with error -107
655[ 3.299565] qcom,qpnp-rtc qpnp-rtc-cf324600: rtc core: registered qpnp_rtc as rtc0
656[ 3.306689] i2c /dev entries driver
657[ 3.310873] unable to find DT imem DLOAD mode node
658[ 3.315120] unable to find DT imem EDLOAD mode node
659[ 3.319759] unable to find DT imem dload-type node
660[ 3.348487] Bluetooth: HCI UART driver ver 2.2
661[ 3.351897] Bluetooth: HCI H4 protocol initialized
662[ 3.356915] Bluetooth: HCI_IBS protocol initialized
663[ 3.361707] bt_dt_parse_vreg_info: qca,bt-vdd-core: is not provided in device tree
664[ 3.369257] bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
665[ 3.375814] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
666[ 3.383237] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
667[ 3.391815] sdhci: Secure Digital Host Controller Interface driver
668[ 3.397020] sdhci: Copyright(c) Pierre Ossman
669[ 3.401309] sdhci-pltfm: SDHCI platform and OF driver helper
670[ 3.407618] usbcore: registered new interface driver usbhid
671[ 3.412494] usbhid: USB HID core driver
672[ 3.418127] sps:BAM 0x078c4000 is registered.
673[ 3.421332] IPA HW is not supported on this target
674[ 3.426875] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
675[ 3.434087] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
676[ 3.441405] coresight-fuse a601c.fuse: QPDI fuse not specified
677[ 3.446990] coresight-fuse a601c.fuse: Fuse initialized
678[ 3.455754] coresight-csr 6001000.csr: CSR initialized
679[ 3.460461] coresight-tmc 6026000.tmc: Byte Counter feature enabled
680[ 3.466892] sps:BAM 0x06084000 is registered.
681[ 3.470696] coresight-tmc 6026000.tmc: TMC initialized
682[ 3.476128] coresight-tmc 6025000.tmc: TMC initialized
683[ 3.482663] nidnt boot config: 0
684[ 3.486035] coresight-tpiu 6020000.tpiu: NIDnT on SDCARD only mode
685[ 3.491341] coresight-tpiu 6020000.tpiu: TPIU initialized
686[ 3.497997] coresight-replicator 6024000.replicator: REPLICATOR initialized
687[ 3.504825] coresight-dbgui 606d000.dbgui: DebugUI capture enabled
688[ 3.510293] coresight-dbgui 606d000.dbgui: DebugUI initializaed
689[ 3.516854] coresight-stm 6002000.stm: STM initialized
690[ 3.521626] coresight-hwevent 606c000.hwevent: Hardware Event driver initialized
691[ 3.529412] coresight-etm 6042000.etm: ETM initialized
692[ 3.534916] coresight-remote-etm soc:rpm_etm0: Remote ETM initialized
693[ 3.540721] coresight-remote-etm soc:modem_etm0: Remote ETM initialized
694[ 3.547675] odm_notify_init:netlink_init.
695[ 3.550930] odm_notify_init:creat socket ok.
696[ 3.583322] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
697[ 3.593430] msm_pcm_probe: dev name soc:qcom,msm-voice-host-pcm
698[ 3.606252] mdm9607-asoc-tomtom soc:sound: ASoC: platform (null) not registered
699[ 3.612964] Netfilter messages via NETLINK v0.30.
700[ 3.617556] nf_conntrack version 0.5.0 (2441 buckets, 9764 max)
701[ 3.623764] ctnetlink v0.93: registering with nfnetlink.
702[ 3.629262] ip_set: protocol 6
703[ 3.631925] ip_tables: (C) 2000-2006 Netfilter Core Team
704[ 3.637082] arp_tables: (C) 2002 David S. Miller
705[ 3.641400] TCP: cubic registered
706[ 3.645632] NET: Registered protocol family 10
707[ 3.650385] ip6_tables: (C) 2000-2006 Netfilter Core Team
708[ 3.655095] sit: IPv6 over IPv4 tunneling driver
709[ 3.660111] NET: Registered protocol family 17
710[ 3.663860] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
711[ 3.676541] Bridge firewalling registered
712[ 3.680361] Ebtables v2.0 registered
713[ 3.684915] NET: Registered protocol family 27
714[ 3.694498] batt adc is probe and get adc ok
715[ 3.697748] Create batt sys file succ rc = 0
716[ 3.724471] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer
717[ 3.735750] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer
718[ 3.748001] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer
719[ 3.760214] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer
720[ 3.779263] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
721[ 3.791148] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
722[ 3.804952] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX
723[ 3.812966] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX
724[ 3.878059] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths
725[ 3.899243] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: no sink widget found for STUB_DTMF_TX
726[ 3.909248] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: Failed to add route DTMF TX -> direct -> STUB_DTMF_TX
727[ 3.921596] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: no sink widget found for STUB_HOST_RX_CAPTURE_TX
728[ 3.934384] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: Failed to add route CS-VOICE HOST RX CAPTURE -> direct -> STUB_HOST_RX_CAPTURE_TX
729[ 3.950138] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: no source widget found for STUB_HOST_RX_PLAYBACK_RX
730[ 3.963286] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: Failed to add route STUB_HOST_RX_PLAYBACK_RX -> direct -> CS-VOICE HOST RX PLAYBACK
731[ 3.979299] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: no sink widget found for STUB_HOST_TX_CAPTURE_TX
732[ 3.992106] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: Failed to add route CS-VOICE HOST TX CAPTURE -> direct -> STUB_HOST_TX_CAPTURE_TX
733[ 4.007858] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: no source widget found for STUB_HOST_TX_PLAYBACK_RX
734[ 4.021020] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: Failed to add route STUB_HOST_TX_PLAYBACK_RX -> direct -> CS-VOICE HOST TX PLAYBACK
735[ 4.045029] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MCLK
736[ 4.051399] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MCLK -> direct -> RX_BIAS
737[ 4.060098] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MCLK
738[ 4.067407] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MCLK -> direct -> LDO_H
739[ 4.075862] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MIC BIAS2 External
740[ 4.084422] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MIC BIAS2 External -> direct -> AMIC2
741[ 4.094090] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for Headset Mic
742[ 4.102003] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route Headset Mic -> direct -> MIC BIAS2 External
743[ 4.112451] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MIC BIAS2 External
744[ 4.120800] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MIC BIAS2 External -> direct -> AMIC3
745[ 4.130472] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for ANCRight Headset Mic
746[ 4.139196] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route ANCRight Headset Mic -> direct -> MIC BIAS2 External
747[ 4.150373] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MIC BIAS2 External
748[ 4.158735] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MIC BIAS2 External -> direct -> AMIC4
749[ 4.168405] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for ANCLeft Headset Mic
750[ 4.177045] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route ANCLeft Headset Mic -> direct -> MIC BIAS2 External
751[ 4.187929] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MIC BIAS1 External
752[ 4.196486] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MIC BIAS1 External -> direct -> AMIC5
753[ 4.206151] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for Handset Mic
754[ 4.214106] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route Handset Mic -> direct -> MIC BIAS1 External
755[ 4.224293] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MIC BIAS1 External
756[ 4.232819] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MIC BIAS1 External -> direct -> AMIC6
757[ 4.242520] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for Handset Mic
758[ 4.250474] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route Handset Mic -> direct -> MIC BIAS1 External
759[ 4.260660] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MIC BIAS1 External
760[ 4.269227] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MIC BIAS1 External -> direct -> DMIC1
761[ 4.278887] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for Digital Mic1
762[ 4.286932] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route Digital Mic1 -> direct -> MIC BIAS1 External
763[ 4.297202] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for MIC BIAS3 External
764[ 4.305768] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route MIC BIAS3 External -> direct -> DMIC3
765[ 4.315433] mdm9607-asoc-tomtom soc:sound: ASoC: no source widget found for Digital Mic3
766[ 4.323446] mdm9607-asoc-tomtom soc:sound: ASoC: Failed to add route Digital Mic3 -> direct -> MIC BIAS3 External
767[ 4.435184] ubi0: attaching mtd23
768[ 5.276920] ubi0: scanning is finished
769[ 5.287910] ubi0: attached mtd23 (name "system", size 191 MiB)
770[ 5.292711] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
771[ 5.299645] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
772[ 5.306374] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
773[ 5.313282] ubi0: good PEBs: 764, bad PEBs: 2, corrupted PEBs: 0
774[ 5.319307] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
775[ 5.326510] ubi0: max/mean erase counter: 82/39, WL threshold: 4096, image sequence number: 1328192
776[ 5.335538] ubi0: available PEBs: 0, total reserved PEBs: 764, PEBs reserved for bad PEB handling: 38
777[ 5.344753] ubi0: background thread "ubi_bgt0d" started, PID 121
778[ 5.350736] RNDIS_IPA module is loaded.
779[ 5.355367] file system registered
780[ 5.358014] mbim_init: initialize 1 instances
781[ 5.362350] mbim_init: Initialized 1 ports
782[ 5.368906] rndis_qc_init: initialize rndis QC instance
783[ 5.373517] Number of LUNs=8
784[ 5.376129] Mass Storage Function, version: 2009/09/11
785[ 5.381085] LUN: removable file: (no medium)
786[ 5.385459] Number of LUNs=1
787[ 5.388310] LUN: removable file: (no medium)
788[ 5.392453] Number of LUNs=1
789[ 5.395768] android_usb gadget: android_usb ready
790[ 5.400012] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
791[ 5.406005] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
792[ 5.412640] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
793[ 5.420578] qcom,qpnp-rtc qpnp-rtc-cf324600: setting system clock to 1970-01-01 00:00:08 UTC (8)
794[ 5.431159] parse_legacy_cluster_params(): Ignoring cluster params
795[ 5.436457] ------------[ cut here ]------------
796[ 5.440920] WARNING: CPU: 0 PID: 1 at /home/xiaoqinqin/SLT181-ouzhou_PV/mdm9607-le-1-0_amss_standard_oem/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607/kernel-source/drivers/cpuidle/lpm-levels-of.c:739 parse_cluster+0xb68/0xcd0()
797[ 5.461900] Modules linked in:
798[ 5.464868] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.18.20 #1
799[ 5.471830] [<c0013f5c>] (unwind_backtrace) from [<c0011f94>] (show_stack+0x10/0x14)
800[ 5.479614] [<c0011f94>] (show_stack) from [<c001d50c>] (warn_slowpath_common+0x68/0x88)
801[ 5.487846] [<c001d50c>] (warn_slowpath_common) from [<c001d5bc>] (warn_slowpath_null+0x18/0x20)
802[ 5.496572] [<c001d5bc>] (warn_slowpath_null) from [<c04294dc>] (parse_cluster+0xb68/0xcd0)
803[ 5.504864] [<c04294dc>] (parse_cluster) from [<c0426a8c>] (lpm_probe+0xc/0x1ec)
804[ 5.512202] [<c0426a8c>] (lpm_probe) from [<c0281bf4>] (platform_drv_probe+0x30/0x7c)
805[ 5.520056] [<c0281bf4>] (platform_drv_probe) from [<c0280210>] (driver_probe_device+0x134/0x344)
806[ 5.528911] [<c0280210>] (driver_probe_device) from [<c02804cc>] (__driver_attach+0x68/0x8c)
807[ 5.537296] [<c02804cc>] (__driver_attach) from [<c027e820>] (bus_for_each_dev+0x6c/0x90)
808[ 5.545378] [<c027e820>] (bus_for_each_dev) from [<c027f8d0>] (bus_add_driver+0x104/0x1f4)
809[ 5.553585] [<c027f8d0>] (bus_add_driver) from [<c0280d1c>] (driver_register+0x9c/0xe0)
810[ 5.561609] [<c0280d1c>] (driver_register) from [<c0bc9bbc>] (lpm_levels_module_init+0x14/0x38)
811[ 5.570285] [<c0bc9bbc>] (lpm_levels_module_init) from [<c0008a8c>] (do_one_initcall+0x19c/0x1dc)
812[ 5.579144] [<c0008a8c>] (do_one_initcall) from [<c0ba1d94>] (kernel_init_freeable+0xf0/0x1b0)
813[ 5.587735] [<c0ba1d94>] (kernel_init_freeable) from [<c07c625c>] (kernel_init+0x8/0xe4)
814[ 5.595813] [<c07c625c>] (kernel_init) from [<c000e760>] (ret_from_fork+0x14/0x34)
815[ 5.603322] ---[ end trace 27a9a6aac5237b61 ]---
816[ 5.607967] ------------[ cut here ]------------
817[ 5.612528] WARNING: CPU: 0 PID: 1 at /home/xiaoqinqin/SLT181-ouzhou_PV/mdm9607-le-1-0_amss_standard_oem/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607/kernel-source/drivers/cpuidle/lpm-levels-of.c:739 parse_cluster+0xb68/0xcd0()
818[ 5.633476] Modules linked in:
819[ 5.636484] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.18.20 #1
820[ 5.643430] [<c0013f5c>] (unwind_backtrace) from [<c0011f94>] (show_stack+0x10/0x14)
821[ 5.651192] [<c0011f94>] (show_stack) from [<c001d50c>] (warn_slowpath_common+0x68/0x88)
822[ 5.659258] [<c001d50c>] (warn_slowpath_common) from [<c001d5bc>] (warn_slowpath_null+0x18/0x20)
823[ 5.668033] [<c001d5bc>] (warn_slowpath_null) from [<c04294dc>] (parse_cluster+0xb68/0xcd0)
824[ 5.676363] [<c04294dc>] (parse_cluster) from [<c0426a8c>] (lpm_probe+0xc/0x1ec)
825[ 5.683705] [<c0426a8c>] (lpm_probe) from [<c0281bf4>] (platform_drv_probe+0x30/0x7c)
826[ 5.691553] [<c0281bf4>] (platform_drv_probe) from [<c0280210>] (driver_probe_device+0x134/0x344)
827[ 5.700407] [<c0280210>] (driver_probe_device) from [<c02804cc>] (__driver_attach+0x68/0x8c)
828[ 5.708834] [<c02804cc>] (__driver_attach) from [<c027e820>] (bus_for_each_dev+0x6c/0x90)
829[ 5.716990] [<c027e820>] (bus_for_each_dev) from [<c027f8d0>] (bus_add_driver+0x104/0x1f4)
830[ 5.725231] [<c027f8d0>] (bus_add_driver) from [<c0280d1c>] (driver_register+0x9c/0xe0)
831[ 5.733184] [<c0280d1c>] (driver_register) from [<c0bc9bbc>] (lpm_levels_module_init+0x14/0x38)
832[ 5.741903] [<c0bc9bbc>] (lpm_levels_module_init) from [<c0008a8c>] (do_one_initcall+0x19c/0x1dc)
833[ 5.750754] [<c0008a8c>] (do_one_initcall) from [<c0ba1d94>] (kernel_init_freeable+0xf0/0x1b0)
834[ 5.759346] [<c0ba1d94>] (kernel_init_freeable) from [<c07c625c>] (kernel_init+0x8/0xe4)
835[ 5.767419] [<c07c625c>] (kernel_init) from [<c000e760>] (ret_from_fork+0x14/0x34)
836[ 5.774968] ---[ end trace 27a9a6aac5237b62 ]---
837[ 5.779544] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
838[ 5.791352] qcom,cc-debug-mdm9607 1800000.qcom,debug: Registered Debug Mux successfully
839[ 5.798790] emac_lan_vreg: disabling
840[ 5.801919] mem_acc_corner: disabling
841[ 5.805591] clock_late_init: Removing enables held for handed-off clocks
842[ 5.814058] ALSA device list:
843[ 5.816037] #0: mdm9607-tomtom-i2s-s˙[ 5.834097] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 127
844[ 5.892127] UBIFS (ubi0:0): recovery needed
845[ 6.094794] UBIFS (ubi0:0): recovery completed
846[ 6.098315] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
847[ 6.105635] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
848[ 6.115520] UBIFS (ubi0:0): FS size: 81518592 bytes (77 MiB, 321 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
849[ 6.125928] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
850[ 6.131716] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 00BCF7FA-593E-40BF-B7CC-8A307BDAE227, small LPT model
851[ 6.146071] VFS: Mounted root (ubifs filesystem) on device 0:12.
852[ 6.151705] Freeing unused kernel memory: 348K (c0ba1000 - c0bf8000)
853
854INIT: version 2.88 booting
855
856[ 6.504109] mount (130) used greatest stack depth: 5020 bytes left
857[ 7.017659] mdev (145) used greatest stack depth: 4812 bytes left
858[ 7.036594] S03mdev (139) used greatest stack depth: 4436 bytes left
859ln: /system/bin/sh: File exists
860
861Switching to composition number Prj_slm_0x9025
862
863[ 7.295764] enable_store: android_usb: already disabled
864Starting adbd: done
865
866[ 7.364194] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 180
867[ 7.475474] read descriptors
868[ 7.477335] read strings
869[ 7.495791] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
870[ 7.559407] UBIFS (ubi0:1): recovery needed
871[ 7.738854] UBIFS (ubi0:1): recovery completed
872[ 7.742379] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "usrfs"
873[ 7.749611] UBIFS (ubi0:1): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
874[ 7.759491] UBIFS (ubi0:1): FS size: 23109632 bytes (22 MiB, 91 LEBs), journal size 5210112 bytes (4 MiB, 21 LEBs)
875[ 7.769818] UBIFS (ubi0:1): reserved for root: 0 bytes (0 KiB)
876[ 7.775640] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 503E2B00-9B4E-4584-AF6F-CF4CCDDBDA58, small LPT model
877MTD : Detected block device usrdata
878
879[ 7.855040] ubi3: attaching mtd21
880[ 8.167159] ubi3: scanning is finished
881[ 8.177450] ubi3: attached mtd21 (name "usrdata", size 70 MiB)
882[ 8.182250] ubi3: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
883[ 8.210819] ubi3: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
884[ 8.217122] ubi3: VID header offset: 4096 (aligned 4096), data offset: 8192
885[ 8.223517] ubi3: good PEBs: 281, bad PEBs: 0, corrupted PEBs: 0
886[ 8.229610] ubi3: user volume: 1, internal volumes: 1, max. volumes count: 128
887[ 8.237117] ubi3: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1328192
888[ 8.245653] ubi3: available PEBs: 0, total reserved PEBs: 281, PEBs reserved for bad PEB handling: 40
889[ 8.254850] ubi3: background thread "ubi_bgt3d" started, PID 200
890UBI device number 3, total 281 LEBs (71360512 bytes, 68.1 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)
891
892[ 8.284113] UBIFS (ubi3:0): background thread "ubifs_bgt3_0" started, PID 204
893[ 8.351832] UBIFS (ubi3:0): recovery needed
894[ 8.530027] UBIFS (ubi3:0): recovery completed
895[ 8.533549] UBIFS (ubi3:0): UBIFS: mounted UBI device 3, volume 0, name "lime"
896[ 8.540695] UBIFS (ubi3:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
897[ 8.550574] UBIFS (ubi3:0): FS size: 57647104 bytes (54 MiB, 227 LEBs), journal size 5210112 bytes (4 MiB, 21 LEBs)
898[ 8.560992] UBIFS (ubi3:0): reserved for root: 0 bytes (0 KiB)
899[ 8.566805] UBIFS (ubi3:0): media format: w4/r0 (latest is w4/r0), UUID 55157425-C5BE-490E-A130-B022C3CEE603, small LPT model
900==== break the loop,mount the ubi3_0 sucessfully ====
901
902MTD : Detected block device usrlog
903
904[ 8.616524] ubi4: attaching mtd22
905[ 8.835651] ubi4: scanning is finished
906[ 8.845804] ubi4: attached mtd22 (name "usrlog", size 50 MiB)
907[ 8.850516] ubi4: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
908[ 8.874118] ubi4: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
909[ 8.879873] ubi4: VID header offset: 4096 (aligned 4096), data offset: 8192
910[ 8.892446] ubi4: good PEBs: 201, bad PEBs: 0, corrupted PEBs: 0
911[ 8.897549] ubi4: user volume: 1, internal volumes: 1, max. volumes count: 128
912[ 8.905036] ubi4: max/mean erase counter: 268/210, WL threshold: 4096, image sequence number: 1689782604
913[ 8.914173] ubi4: available PEBs: 32, total reserved PEBs: 169, PEBs reserved for bad PEB handling: 20
914[ 8.923391] ubi4: background thread "ubi_bgt4d" started, PID 214
915UBI device number 4, total 201 LEBs (51044352 bytes, 48.7 MiB), available 32 LEBs (8126464 bytes, 7.8 MiB), LEB size 253952 bytes (248.0 KiB)
916
917[ 8.954150] UBIFS (ubi4:0): background thread "ubifs_bgt4_0" started, PID 218
918[ 9.015125] UBIFS (ubi4:0): recovery needed
919[ 9.280014] UBIFS (ubi4:0): recovery completed
920[ 9.283534] UBIFS (ubi4:0): UBIFS: mounted UBI device 4, volume 0, name "log"
921[ 9.290603] UBIFS (ubi4:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
922[ 9.300479] UBIFS (ubi4:0): FS size: 34283520 bytes (32 MiB, 135 LEBs), journal size 2031617 bytes (1 MiB, 7 LEBs)
923[ 9.310807] UBIFS (ubi4:0): reserved for root: 1619295 bytes (1581 KiB)
924[ 9.317406] UBIFS (ubi4:0): media format: w4/r0 (latest is w4/r0), UUID 8EF0F81D-5510-49D7-AA92-CE8A84AB11C1, small LPT model
925==== break the loop,mount the ubi4_0 sucessfully ====
926
927MTD : Detected block device : /firmware for modem
928
929[ 9.386454] ubi1: attaching mtd9
930[ 9.690731] ubi1: scanning is finished
931[ 9.701036] ubi1: attached mtd9 (name "modem", size 69 MiB)
932[ 9.724133] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
933[ 9.729974] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
934[ 9.740455] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192
935[ 9.746505] ubi1: good PEBs: 278, bad PEBs: 0, corrupted PEBs: 0
936[ 9.752371] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
937[ 9.759650] ubi1: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 34870392
938[ 9.768742] ubi1: available PEBs: 0, total reserved PEBs: 278, PEBs reserved for bad PEB handling: 40
939[ 9.777809] ubi1: background thread "ubi_bgt1d" started, PID 230
940UBI device number 1, total 278 LEBs (70598656 bytes, 67.3 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)
941
942[ 9.937637] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "modem", R/O mode
943[ 9.944837] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
944[ 9.954712] UBIFS (ubi1:0): FS size: 56885248 bytes (54 MiB, 224 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
945[ 9.965126] UBIFS (ubi1:0): reserved for root: 0 bytes (0 KiB)
946[ 9.970916] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 26EF5BED-D1D7-4AC5-8210-6D30EC9CC5D6, small LPT model
947Starting psmd: done
948
949/firmware/image
950
951[ 10.221350] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
952[ 10.251671] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x82a00000 to 0x87900000
953[ 10.311235] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue.
954[ 10.326019] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0x8f900000 to 0x8fa00000
955[ 10.391380] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
956Nothing to do. No firmware links needed.
957
958Starting QCMAP_ConnectionManager: [ 11.224265] QCMAP:start
959done
960
961Starting qti: [ 11.294587] QTI:start
962done
963
964[ 11.468056] rtc-dev.c:rtc_dev_ioctl:read-rtc over 1970-01-01 00:00:14
965Thu Feb 28 18:38:16 UTC 2019
966
967hwclock: RTC_SET_TIME: Invalid argument
968
969
970INIT: Entering runlevel: 5
971
972
973Configuring network interfaces... Cannot find device "eth0"
974
975[ 12.151325] USB QCMAP NL IOCTL Snd GETNEIGH Succ
976/var/spool/cron/crontabs is exist
977
978/limebike is exist
979
980/limebike/log is exist
981
982[ 12.217528] ------------[ cut here ]------------
983[ 12.221133] WARNING: CPU: 0 PID: 378 at /home/xiaoqinqin/SLT181-ouzhou_PV/mdm9607-le-1-0_amss_standard_oem/apps_proc/oe-core/build/tmp-glibc/work-shared/mdm9607/kernel-source/net/netfilter/nf_queue.c:35 nf_register_queue_handler+0x28/0x38()
984add logrotate.sh crond task
985
986[ 12.294676] Modules linked in:
987[ 12.296709] CPU: 0 PID: 378 Comm: sh Tainted: G W 3.18.20 #1
988[ 12.303411] [<c0013f5c>] (unwind_backtrace) from [<c0011f94>] (show_stack+0x10/0x14)
989crond[384]: crond (busybox 1.23.1) started, log level 8
990
991
992
993
994[ 12.356024] [<c0011f94>] (show_stack) from [<c001d50c>] (warn_slowpath_common+0x68/0x88)
995[ 12.363090] [<c001d50c>] (warn_slowpath_common) from [<c001d5bc>] (warn_slowpath_null+0x18/0x20)
996[ 12.389115] rtc-dev.c:rtc_dev_ioctl:read-rtc over 1970-01-01 00:00:15
997[ 12.404178] [<c001d5bc>] (warn_slowpath_null) from [<c065b5d8>] (nf_register_queue_handler+0x28/0x38)
998[ 12.412370] [<c065b5d8>] (nf_register_queue_handler) from [<c0676cc8>] (proc_sip_segment+0x58/0x9c)
999Starting syslogd [ 12.454120] [<c0676cc8>] (proc_sip_segment) from [<c0130110>] (proc_sys_call_handler+0x98/0xb4)
1000[ 12.461793] [<c0130110>] (proc_sys_call_handler) from [<c013013c>] (proc_sys_write+0x10/0x18)
1001done
1002
1003Starting irsc_util: Starting irsc too 12.511120] [<c013013c>] (proc_sys_write) from [<c00e3350>] (vfs_write+0xb8/0x170)
1004
1005
1006Failed to open file:/etc/sec_config
1007
1008Absent/Invalid config,Default rules apply
1009
1010Ending irsc tool
1011
1012done
1013
1014[ 12.544702] [<c00e3350>] (vfs_write) from [<c00e37c0>] (SyS_write+0x40/0x80)
1015[ 12.550725] [<c00e37c0>] (SyS_write) from [<c000e6c0>] (ret_fast_syscall+0x0/0x38)
1016Starting modem dependent daemons: [ 12.581354] ---[ end trace 27a9a6aac5237b63 ]---
1017[ 13.066329] QCMAP:Start DHCP server
1018[ 13.215187] random: dnsmasq urandom read with 44 bits of entropy available
1019[ 13.267495] QCMAP:DHCP server started
1020[ 13.287260] QCMAP:DHCP server started
1021[ 13.367297] QCMAP:Enable mobileap
1022[ 17.183168] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
1023[ 17.276877] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
1024[ 17.284593] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
1025[ 17.292704] M-Notify: General: 7
1026[ 17.358444] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, c0dc4464
1027[ 17.375171] apr_tal:Modem Is Up
1028[ 17.716665] embms:start/load
1029Starting/Loading embms_kernel module: done loading embms_kernel module
1030
1031Starting qmuxd: done
1032
1033Starting thermal-engine: done
1034
1035Starting netmgrd: done
1036
1037[ 17.988969] msm_thermal:set_enabled enabled = 0
1038Starting qmi_shutdown_modem: done
1039
1040Starting notifymgr: done
1041
1042Starting subsystem_ramdump: done
1043
1044[ 18.292520] Shortcut_FE_IPV4:start/load
1045Starting/Loading Shortcut_FE Driver: [ 18.331711] sps:BAM 0x04044000 is registered.
1046[ 18.364862] sps:BAM 0x04044000 (va:0xd1fa0000) enabled: ver:0x27, number of pipes:6
1047[ 18.482553] Shortcut_FE_IPV6:start/load
1048[ 18.704618] Shortcut_FE_CM:start/load
1049done loading Shortcut FE driver
1050
1051Starting system message bus: dbus.
1052
1053Starting modem dependent daemons: Starting diagrebootapp: done
1054
1055Starting atreset: done
1056
1057[ 19.873705] irq_set_enable: 0
1058[ 19.924108] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 748
1059[ 19.989397] QCMAP:Enable mobileap done
1060[ 20.171670] UBIFS (ubi0:2): recovery needed
1061[ 20.210305] QCMAP:Init Complete
1062[ 20.331751] UBIFS (ubi0:2): recovery completed
1063[ 20.338856] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "cachefs"
1064[ 20.353808] UBIFS (ubi0:2): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
1065[ 20.374251] UBIFS (ubi0:2): FS size: 71106560 bytes (67 MiB, 280 LEBs), journal size 3555328 bytes (3 MiB, 14 LEBs)
1066[ 20.383655] UBIFS (ubi0:2): reserved for root: 3358538 bytes (3279 KiB)
1067[ 20.410614] UBIFS (ubi0:2): media format: w4/r0 (latest is w4/r0), UUID B536A659-83FC-4020-9B46-14BB65D17AEC, small LPT model
1068/limebike
1069/limebike/lib
1070/limebike
1071Starting qti_ppp: 20.546927] QTI_PPP:start
1072done
1073done
1074 * Starting Avahi Unicast DNS Configuration Daemon: avahi-dnsconfd
1075 ...fail!
1076Starting powerconfig for mdm9607: Starting fs-scrub-daemon: done
1077Starting pdc daemon: done
1078[ 21.363072] mbimd: Proc start
1079[ 21.498540] mbim_open: Open mbim driver
1080[ 21.501348] mbim_open: Lock mbim_dev->open_excl for open
1081[ 21.557750] USB QCMAP NL IOCTL Snd GETNEIGH Succ
1082[ 21.564366] mbim_open: USB cable not connected
1083[ 21.567776] mbim_open: Exit, mbim file opened
1084[ 21.807389] USB QCMAP NL IOCTL Snd GETNEIGH Succ