· 6 years ago · Apr 12, 2020, 02:40 AM
1
2U-Boot TPL 2020.01-ayufan-2011-g26eed9fd (Apr 09 2020 - 21:56:00)
3LPDDR3, 800MHz
4BW=32 Col=11 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=4096MB
5Trying to boot from BOOTROM
6Returning to boot ROM...
7
8U-Boot SPL 2020.01-ayufan-2011-g26eed9fd (Apr 09 2020 - 21:56:00 +0000)
9board_init_sdmmc_pwr_en
10Trying to boot from MMC2
11NOTICE: BL31: v2.2(release):v2.2-286-g22d12c414
12NOTICE: BL31: Built : 21:55:58, Apr 9 2020
13NOTICE: BL31:Rockchip release version: v1.2
14
15
16U-Boot 2020.01-ayufan-2011-g26eed9fd (Apr 09 2020 - 21:56:07 +0000)
17
18Model: Pine64 Rock64
19DRAM: 4 GiB
20PMIC: RK8050 (on=0x40, off=0x00)
21MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
22Loading Environment from MMC... Card did not respond to voltage select!
23*** Warning - No block device, using default environment
24
25In: serial@ff130000
26Out: serial@ff130000
27Err: serial@ff130000
28Model: Pine64 Rock64
29Net: eth0: ethernet@ff540000
30Hit any key to stop autoboot: 0
31switch to partitions #0, OK
32mmc0(part 0) is current device
33Scanning mmc 0:3...
34Found /extlinux/extlinux.conf
35Retrieving file: /extlinux/extlinux.conf
36937 bytes read in 5 ms (182.6 KiB/s)
37select kernel
381: kernel-5.6.0-1134-ayufan-g652fb97d87eb
392: kernel-5.6.0-1134-ayufan-g652fb97d87eb-memtest
40Enter choice: 1: kernel-5.6.0-1134-ayufan-g652fb97d87eb
41Retrieving file: /initrd.img-5.6.0-1134-ayufan-g652fb97d87eb
4221505868 bytes read in 486 ms (42.2 MiB/s)
43Retrieving file: /vmlinuz-5.6.0-1134-ayufan-g652fb97d87eb
4422915584 bytes read in 517 ms (42.3 MiB/s)
45append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=a2:f5:47:18:b2:e3 eth1addr= serial=56cdf54357d9fd37 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-roo4
46Retrieving file: /dtbs/5.6.0-1134-ayufan-g652fb97d87eb/rockchip/rk3328-rock64.dtb
4737388 bytes read in 8 ms (4.5 MiB/s)
48## Flattened Device Tree blob at 01f00000
49 Booting using the fdt blob at 0x1f00000
50 Loading Ramdisk to fba9a000, end fcf1c74c ... OK
51 Loading Device Tree to 00000000fba8d000, end 00000000fba9920b ... OK
52
53Starting kernel ...
54
55[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
56[ 0.000000] Linux version 5.6.0-1134-ayufan-g652fb97d87eb (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)) #ayufan SMP Thu Apr 9 22:26:01 UTC 0
57[ 0.000000] Machine model: Pine64 Rock64
58[ 0.000000] efi: Getting EFI parameters from FDT:
59[ 0.000000] efi: UEFI not found.
60[ 0.000000] cma: Reserved 64 MiB at 0x00000000f7800000
61[ 0.000000] psci: probing for conduit method from DT.
62[ 0.000000] psci: PSCIv1.1 detected in firmware.
63[ 0.000000] psci: Using standard PSCI v0.2 function IDs
64[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
65[ 0.000000] psci: SMC Calling Convention v1.0
66[ 0.000000] percpu: Embedded 34 pages/cpu s101272 r8192 d29800 u139264
67[ 0.000000] Detected VIPT I-cache on CPU0
68[ 0.000000] CPU features: detected: ARM erratum 845719
69[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027656
70[ 0.000000] Kernel command line: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=a2:f5:47:18:b2:e3 eth1addr= serial=56cdf54357d9fd37 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapac4
71[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
72[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
73[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
74[ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
75[ 0.000000] Memory: 3911844K/4175872K available (14012K kernel code, 1130K rwdata, 5956K rodata, 1216K init, 8522K bss, 198492K reserved, 65536K cma-reserved)
76[ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x84/0x168 with crng_init=0
77[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
78[ 0.000000] rcu: Hierarchical RCU implementation.
79[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
80[ 0.000000] Tasks RCU enabled.
81[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
82[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
83[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
84[ 0.000000] GIC: Using split EOI/Deactivate mode
85[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
86[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
87[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
88[ 0.000852] Console: colour dummy device 80x25
89[ 0.001272] printk: console [tty0] enabled
90[ 0.001323] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
91[ 0.001355] pid_max: default: 32768 minimum: 301
92[ 0.001623] LSM: Security Framework initializing
93[ 0.001655] Yama: becoming mindful.
94[ 0.001773] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
95[ 0.001817] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
96[ 0.001910] *** VALIDATE tmpfs ***
97[ 0.002565] *** VALIDATE proc ***
98[ 0.002889] *** VALIDATE cgroup ***
99[ 0.002910] *** VALIDATE cgroup2 ***
100[ 0.004047] rcu: Hierarchical SRCU implementation.
101[ 0.007075] EFI services will not be available.
102[ 0.007664] smp: Bringing up secondary CPUs ...
103[ 0.008305] Detected VIPT I-cache on CPU1
104[ 0.008371] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
105[ 0.009138] Detected VIPT I-cache on CPU2
106[ 0.009193] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
107[ 0.010052] Detected VIPT I-cache on CPU3
108[ 0.010108] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
109[ 0.010227] smp: Brought up 1 node, 4 CPUs
110[ 0.010271] SMP: Total of 4 processors activated.
111[ 0.010289] CPU features: detected: 32-bit EL0 Support
112[ 0.010306] CPU features: detected: CRC32 instructions
113[ 0.032316] CPU: All CPU(s) started at EL2
114[ 0.032400] alternatives: patching kernel code
115[ 0.035429] devtmpfs: initialized
116[ 0.047920] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
117[ 0.047970] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
118[ 0.051200] pinctrl core: initialized pinctrl subsystem
119[ 0.052088] thermal_sys: Registered thermal governor 'fair_share'
120[ 0.052093] thermal_sys: Registered thermal governor 'bang_bang'
121[ 0.052121] thermal_sys: Registered thermal governor 'step_wise'
122[ 0.052139] thermal_sys: Registered thermal governor 'user_space'
123[ 0.052155] thermal_sys: Registered thermal governor 'power_allocator'
124[ 0.052627] DMI not present or invalid.
125[ 0.053491] NET: Registered protocol family 16
126[ 0.056254] DMA: preallocated 1024 KiB pool for atomic allocations
127[ 0.057496] cpuidle: using governor ladder
128[ 0.057545] cpuidle: using governor menu
129[ 0.058307] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
130[ 0.058447] ASID allocator initialised with 65536 entries
131[ 0.058673] Serial: AMBA PL011 UART driver
132[ 0.095620] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
133[ 0.095654] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
134[ 0.095674] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
135[ 0.095694] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
136[ 2.252676] cryptd: max_cpu_qlen set to 1000
137[ 2.285541] ACPI: Interpreter disabled.
138[ 2.286796] rockchip-pinctrl pinctrl: pin gpio0-2 already requested by vcc-host-5v-regulator; cannot claim for vcc-host1-5v-regulator
139[ 2.286838] rockchip-pinctrl pinctrl: pin-2 (vcc-host1-5v-regulator) status -22
140[ 2.286864] rockchip-pinctrl pinctrl: could not request pin 2 (gpio0-2) from group usb20-host-drv on device rockchip-pinctrl
141[ 2.286892] reg-fixed-voltage vcc-host1-5v-regulator: Error applying setting, reverse things back
142[ 2.286932] reg-fixed-voltage: probe of vcc-host1-5v-regulator failed with error -22
143[ 2.287706] iommu: Default domain type: Translated
144[ 2.288875] vgaarb: loaded
145[ 2.289979] SCSI subsystem initialized
146[ 2.290653] usbcore: registered new interface driver usbfs
147[ 2.290728] usbcore: registered new interface driver hub
148[ 2.290848] usbcore: registered new device driver usb
149[ 2.291305] mc: Linux media interface: v0.10
150[ 2.291363] videodev: Linux video capture interface: v2.00
151[ 2.291467] pps_core: LinuxPPS API ver. 1 registered
152[ 2.291484] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
153[ 2.291521] PTP clock support registered
154[ 2.291809] EDAC MC: Ver: 3.0.0
155[ 2.292763] Advanced Linux Sound Architecture Driver Initialized.
156[ 2.293454] NetLabel: Initializing
157[ 2.293474] NetLabel: domain hash size = 128
158[ 2.293487] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
159[ 2.293576] NetLabel: unlabeled traffic allowed by default
160[ 2.294443] clocksource: Switched to clocksource arch_sys_counter
161[ 2.294474] *** VALIDATE bpf ***
162[ 2.294844] VFS: Disk quotas dquot_6.6.0
163[ 2.294937] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
164[ 2.295049] *** VALIDATE ramfs ***
165[ 2.295086] *** VALIDATE hugetlbfs ***
166[ 2.295505] pnp: PnP ACPI: disabled
167[ 2.304951] NET: Registered protocol family 2
168[ 2.305832] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
169[ 2.305953] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
170[ 2.306374] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
171[ 2.307122] TCP: Hash tables configured (established 32768 bind 32768)
172[ 2.307312] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
173[ 2.307477] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
174[ 2.307895] NET: Registered protocol family 1
175[ 2.308596] RPC: Registered named UNIX socket transport module.
176[ 2.308623] RPC: Registered udp transport module.
177[ 2.308637] RPC: Registered tcp transport module.
178[ 2.308651] RPC: Registered tcp NFSv4.1 backchannel transport module.
179[ 2.308676] PCI: CLS 0 bytes, default 64
180[ 2.308885] Trying to unpack rootfs image as initramfs...
181[ 2.741498] Freeing initrd memory: 21000K
182[ 2.743045] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
183[ 2.743425] kvm [1]: IPA Size Limit: 40bits
184[ 2.745961] kvm [1]: vgic interrupt IRQ1
185[ 2.746134] kvm [1]: Hyp mode initialized successfully
186[ 3.472597] workingset: timestamp_bits=46 max_order=20 bucket_order=0
187[ 3.481549] zbud: loaded
188[ 3.484623] *** VALIDATE nfs ***
189[ 3.484732] *** VALIDATE nfs4 ***
190[ 3.484846] NFS: Registering the id_resolver key type
191[ 3.484883] Key type id_resolver registered
192[ 3.484898] Key type id_legacy registered
193[ 3.484923] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
194[ 3.484973] ntfs: driver 2.1.32 [Flags: R/W].
195[ 3.485468] fuse: init (API version 7.31)
196[ 3.485605] *** VALIDATE fuseblk ***
197[ 3.485627] *** VALIDATE fuse ***
198[ 3.486038] SGI XFS with ACLs, security attributes, quota, no debug enabled
199[ 3.488244] *** VALIDATE xfs ***
200[ 3.522971] NET: Registered protocol family 38
201[ 3.523008] Key type asymmetric registered
202[ 3.523024] Asymmetric key parser 'x509' registered
203[ 3.523098] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241)
204[ 3.523327] io scheduler mq-deadline registered
205[ 3.523347] io scheduler kyber registered
206[ 3.523588] io scheduler bfq registered
207[ 3.528163] gpio-syscon ff100000.syscon:grf-gpio: can't read the data register offset!
208[ 3.529759] IPMI message handler: version 39.2
209[ 3.532620] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
210[ 3.532657] dma-pl330 ff1f0000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
211[ 3.534384] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
212[ 3.536796] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 15, base_baud = 1500000) is a 16550A
213[ 3.615825] printk: console [ttyS2] enabled
214[ 3.621647] rockchip-spi ff190000.spi: Failed to request TX DMA channel
215[ 3.622259] rockchip-spi ff190000.spi: Failed to request RX DMA channel
216[ 3.624071] spi-nor spi0.0: gd25q128 (16384 Kbytes)
217[ 3.640045] rockchip-spi ff190000.spi: chipselect 0 already in use
218[ 3.640625] spi_master spi0: spi_device register error /spi@ff190000/spi-flash@0
219[ 3.641298] spi_master spi0: Failed to create SPI device for /spi@ff190000/spi-flash@0
220[ 3.642980] libphy: Fixed MDIO Bus: probed
221[ 3.644858] dwc3 ff600000.dwc3: Failed to get clk 'ref': -2
222[ 3.646397] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
223[ 3.647219] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
224[ 3.660461] dwc2 ff580000.usb: DWC OTG Controller
225[ 3.660924] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
226[ 3.661592] dwc2 ff580000.usb: irq 36, io mem 0xff580000
227[ 3.662359] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
228[ 3.663103] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
229[ 3.663753] usb usb1: Product: DWC OTG Controller
230[ 3.664179] usb usb1: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb dwc2_hsotg
231[ 3.664898] usb usb1: SerialNumber: ff580000.usb
232[ 3.665967] hub 1-0:1.0: USB hub found
233[ 3.666360] hub 1-0:1.0: 1 port detected
234[ 3.668521] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
235[ 3.669133] ehci-pci: EHCI PCI platform driver
236[ 3.669600] ehci-platform: EHCI generic platform driver
237[ 3.672508] ehci-platform ff5c0000.usb: EHCI Host Controller
238[ 3.673233] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
239[ 3.674071] ehci-platform ff5c0000.usb: irq 37, io mem 0xff5c0000
240[ 3.704472] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
241[ 3.705311] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
242[ 3.706057] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
243[ 3.706705] usb usb2: Product: EHCI Host Controller
244[ 3.707147] usb usb2: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb ehci_hcd
245[ 3.707824] usb usb2: SerialNumber: ff5c0000.usb
246[ 3.708849] hub 2-0:1.0: USB hub found
247[ 3.709231] hub 2-0:1.0: 1 port detected
248[ 3.710129] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
249[ 3.710707] ohci-pci: OHCI PCI platform driver
250[ 3.711191] ohci-platform: OHCI generic platform driver
251[ 3.712053] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
252[ 3.712893] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
253[ 3.713716] ohci-platform ff5d0000.usb: irq 38, io mem 0xff5d0000
254[ 3.778914] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
255[ 3.779661] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
256[ 3.780309] usb usb3: Product: Generic Platform OHCI controller
257[ 3.780841] usb usb3: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb ohci_hcd
258[ 3.781518] usb usb3: SerialNumber: ff5d0000.usb
259[ 3.782564] hub 3-0:1.0: USB hub found
260[ 3.782954] hub 3-0:1.0: 1 port detected
261[ 3.783823] uhci_hcd: USB Universal Host Controller Interface driver
262[ 3.785195] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
263[ 3.785941] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
264[ 3.786855] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
265[ 3.787756] xhci-hcd xhci-hcd.0.auto: irq 172, io mem 0xff600000
266[ 3.788717] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
267[ 3.789462] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
268[ 3.790112] usb usb4: Product: xHCI Host Controller
269[ 3.790553] usb usb4: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb xhci-hcd
270[ 3.791230] usb usb4: SerialNumber: xhci-hcd.0.auto
271[ 3.792285] hub 4-0:1.0: USB hub found
272[ 3.792670] hub 4-0:1.0: 1 port detected
273[ 3.793439] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
274[ 3.794151] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
275[ 3.794880] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
276[ 3.795553] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
277[ 3.796435] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
278[ 3.797177] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
279[ 3.797826] usb usb5: Product: xHCI Host Controller
280[ 3.798266] usb usb5: Manufacturer: Linux 5.6.0-1134-ayufan-g652fb97d87eb xhci-hcd
281[ 3.798945] usb usb5: SerialNumber: xhci-hcd.0.auto
282[ 3.799981] hub 5-0:1.0: USB hub found
283[ 3.800366] hub 5-0:1.0: 1 port detected
284[ 3.801313] usbcore: registered new interface driver uas
285[ 3.801946] usbcore: registered new interface driver usb-storage
286[ 3.802537] usbcore: registered new interface driver ums-alauda
287[ 3.803110] usbcore: registered new interface driver ums-cypress
288[ 3.803691] usbcore: registered new interface driver ums-datafab
289[ 3.804270] usbcore: registered new interface driver ums_eneub6250
290[ 3.804907] usbcore: registered new interface driver ums-freecom
291[ 3.805496] usbcore: registered new interface driver ums-isd200
292[ 3.806066] usbcore: registered new interface driver ums-jumpshot
293[ 3.806654] usbcore: registered new interface driver ums-karma
294[ 3.807225] usbcore: registered new interface driver ums-onetouch
295[ 3.807829] usbcore: registered new interface driver ums-realtek
296[ 3.808411] usbcore: registered new interface driver ums-sddr09
297[ 3.808983] usbcore: registered new interface driver ums-sddr55
298[ 3.809555] usbcore: registered new interface driver ums-usbat
299[ 3.810177] usbcore: registered new interface driver usbserial_generic
300[ 3.810792] usbserial: USB Serial support registered for generic
301[ 3.813143] mousedev: PS/2 mouse device common for all mice
302[ 3.816546] rk808 1-0018: chip id: 0x8050
303[ 3.822444] rk808-regulator rk808-regulator: there is no dvs0 gpio
304[ 3.823042] rk808-regulator rk808-regulator: there is no dvs1 gpio
305[ 3.823662] DCDC_REG1: supplied by vcc_sys
306[ 3.826528] vcc_host_5v: supplied by vcc_sys
307[ 3.827037] DCDC_REG2: supplied by vcc_sys
308[ 3.828974] DCDC_REG3: supplied by vcc_sys
309[ 3.829595] DCDC_REG4: supplied by vcc_sys
310[ 3.831181] LDO_REG1: supplied by vcc_io
311[ 3.834579] LDO_REG2: supplied by vcc_io
312[ 3.837901] LDO_REG3: supplied by vcc_sys
313[ 3.850763] rk808-rtc rk808-rtc: registered as rtc0
314[ 3.855610] device-mapper: uevent: version 1.0.3
315[ 3.856477] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
316[ 3.858795] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0
317[ 3.861324] sdhci: Secure Digital Host Controller Interface driver
318[ 3.861891] sdhci: Copyright(c) Pierre Ossman
319[ 3.862946] Synopsys Designware Multimedia Card Interface Driver
320[ 3.864918] dwmmc_rockchip ff520000.mmc: IDMAC supports 32-bit address mode.
321[ 3.865570] dwmmc_rockchip ff520000.mmc: Using internal DMA controller.
322[ 3.866157] dwmmc_rockchip ff520000.mmc: Version ID is 270a
323[ 3.866681] dwmmc_rockchip ff520000.mmc: DW MMC controller at irq 33,32 bit host data width,256 deep fifo
324[ 3.867601] mmc_host mmc0: card is non-removable.
325[ 3.880706] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
326[ 3.894726] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
327[ 3.895427] dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
328[ 3.896020] dwmmc_rockchip ff500000.mmc: Version ID is 270a
329[ 3.896583] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 34,32 bit host data width,256 deep fifo
330[ 3.897460] vcc_sd: supplied by vcc_io
331[ 3.898017] dwmmc_rockchip ff500000.mmc: Got CD GPIO
332[ 3.911199] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
333[ 3.925341] sdhci-pltfm: SDHCI platform and OF driver helper
334[ 3.929196] leds-gpio: probe of leds failed with error -16
335[ 3.930091] ledtrig-cpu: registered to indicate activity on CPUs
336[ 3.930999] hid: raw HID events driver (C) Jiri Kosina
337[ 3.931654] usbcore: registered new interface driver usbhid
338[ 3.932155] usbhid: USB HID core driver
339[ 3.932700] hantro-vpu ff350000.video-codec: Adding to iommu group 0
340[ 3.934042] hantro-vpu ff350000.video-codec: registered rockchip,rk3328-vpu-dec as /dev/video0
341[ 3.939226] Initializing XFRM netlink socket
342[ 3.940264] NET: Registered protocol family 10
343[ 3.966493] random: fast init done
344[ 3.976868] Segment Routing with IPv6
345[ 3.977286] mip6: Mobile IPv6
346[ 3.977618] NET: Registered protocol family 17
347[ 3.978227] Key type dns_resolver registered
348[ 3.979278] registered taskstats version 1
349[ 3.979795] zswap: loaded using pool lzo/zbud
350[ 3.980591] Key type ._fscrypt registered
351[ 3.981007] Key type .fscrypt registered
352[ 3.981364] Key type fscrypt-provisioning registered
353[ 3.981882] Key type big_key registered
354[ 3.984071] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
355[ 3.992734] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
356[ 3.993524] mmc0: new HS200 MMC card at address 0001
357[ 3.994741] mmcblk0: mmc0:0001 NCard 14.5 GiB
358[ 3.995491] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB
359[ 3.996325] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB
360[ 3.997044] mmcblk0rpmb: mmc0:0001 NCard partition 3 4.00 MiB, chardev (238:0)
361[ 3.997136] Key type encrypted registered
362[ 4.002684] GPT:Primary header thinks Alt. header is not at the end of the disk.
363[ 4.003371] GPT:5859361 != 30310399
364[ 4.003686] GPT:Alternate GPT header not at the end of the disk.
365[ 4.004236] GPT:5859361 != 30310399
366[ 4.004572] GPT: Use GNU Parted to correct GPT errors.
367[ 4.005062] mmcblk0: p1 p2 p3 p4
368[ 4.013011] rk808-rtc rk808-rtc: setting system clock to 2016-01-21T08:56:57 UTC (1453366617)
369[ 4.013779] of_cfs_init
370[ 4.014090] of_cfs_init: OK
371[ 4.015153] ALSA device list:
372[ 4.015429] No soundcards found.
373[ 4.016355] Freeing unused kernel memory: 1216K
374[ 4.084532] usb 2-1: new high-speed USB device number 2 using ehci-platform
375[ 4.094574] Run /init as init process
376Loading, please wait...
377[ 4.136066] usb 2-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
378[ 4.136804] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
379[ 4.137435] usb 2-1: Product: USB 10/100/1000 LAN
380[ 4.137853] usb 2-1: Manufacturer: Realtek
381[ 4.138218] usb 2-1: SerialNumber: 9CEBE8AE09F7
382Starting version 245.4-2ubuntu1
383[ 4.461453] rockchip-vop ff370000.vop: Adding to iommu group 1
384[ 4.466285] rockchip-drm display-subsystem: bound ff370000.vop (ops vop_component_ops [rockchipdrm])
385[ 4.467318] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2)
386[ 4.468713] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver
387[ 4.469942] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
388[ 4.470796] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
389[ 4.471383] [drm] No driver support for vblank timestamp query.
390[ 4.471989] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
391[ 4.473150] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
392[ 4.488826] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
393[ 4.489481] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
394[ 4.490205] rk_gmac-dwmac ff540000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
395[ 4.491168] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
396[ 4.492161] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
397[ 4.492860] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24).
398[ 4.493377] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18).
399[ 4.493890] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
400[ 4.494842] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed
401[ 4.495509] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
402[ 4.501071] rk_gmac-dwmac ff540000.ethernet: init for RGMII
403[ 4.501993] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35
404[ 4.503025] rk_gmac-dwmac ff540000.ethernet: DWMAC1000
405[ 4.503540] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register supported
406[ 4.504208] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine supported
407[ 4.504908] rk_gmac-dwmac ff540000.ethernet: COE Type 2
408[ 4.505381] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported
409[ 4.506261] rk_gmac-dwmac ff540000.ethernet: Normal descriptors
410[ 4.506844] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled
411[ 4.507368] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer
412[ 4.522517] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
413[ 4.531635] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
414[ 4.547565] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
415[ 4.597107] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
416[ 4.605779] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
417[ 4.617019] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
418[ 4.617650] blk_update_request: I/O error, dev mmcblk0, sector 70 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
419[ 4.625118] libphy: stmmac: probed
420[ 4.625446] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
421[ 4.626545] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
422[ 4.737571] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
423[ 4.753338] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
424[ 4.753975] blk_update_request: I/O error, dev mmcblk0, sector 70 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
425[ 4.755432] Buffer I/O error on dev mmcblk0, logical block 8, async page read
426[ 4.774139] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
427[ 4.829749] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
428[ 4.845555] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
429[ 4.895526] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
430[ 4.908929] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
431[ 4.924825] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
432[ 4.925463] blk_update_request: I/O error, dev mmcblk0, sector 70 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
433[ 4.974463] dwmmc_rockchip ff520000.mmc: Unexpected command timeout, state 3
434[ 5.259859] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
435[ 5.309885] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
436[ 5.323472] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
437[ 5.338884] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
438[ 5.339522] blk_update_request: I/O error, dev mmcblk0, sector 197 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
439[ 5.514676] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
440[ 5.568581] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
441[ 5.569245] blk_update_request: I/O error, dev mmcblk0, sector 197 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
442[ 5.571011] Buffer I/O error on dev mmcblk0p1, logical block 16, async page read
443Begin: Loading essential drivers ... done.
444Begin: Running /scripts/init-premount ... done.
445Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
446Begin: Running /scripts/local-premount ... done.
447Warning: fsck not present, so skipping root file system
448[ 5.703747] EXT4-fs (mmcblk0p4): recovery complete
449[ 5.704200] EXT4-fs (mmcblk0p4): mounted filesystem with writeback data mode. Opts: (null)
450done.
451Begin: Running /scripts/local-bottom ... done.
452Begin: Running /scripts/init-bottom ... [ 5.733395] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
453[ 5.742300] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
454[ 5.758122] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
455[ 5.808033] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
456[ 5.821519] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
457done.
458[ 5.848893] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
459[ 5.849513] blk_update_request: I/O error, dev mmcblk0, sector 4718897 op 0x0:(READ) flags 0x80000 phys_seg 27 prio class 0
460[ 5.984458] dwmmc_rockchip ff520000.mmc: Unexpected command timeout, state 3
461[ 6.174462] dwmmc_rockchip ff520000.mmc: Unexpected command timeout, state 3
462[ 6.339875] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
463[ 6.389889] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
464[ 6.403349] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
465[ 6.501568] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
466[ 6.502219] blk_update_request: I/O error, dev mmcblk0, sector 535281 op 0x0:(READ) flags 0x80000 phys_seg 3 prio class 0
467[ 6.526242] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
468[ 6.545427] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
469[ 6.559100] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
470[ 6.575018] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
471[ 6.625020] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
472[ 6.632675] random: crng init done
473[ 6.638828] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
474[ 6.654789] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
475[ 6.655425] blk_update_request: I/O error, dev mmcblk0, sector 612214 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
476[ 6.656941] EXT4-fs warning (device mmcblk0p4): ext4_dx_find_entry:1647: inode #3094: lblock 1: comm run-init: error -5 reading directory block
477run-init: can't execute '/sbin/init': Input/output error
478Target filesystem doesn't have requested /sbin/init.
479[ 6.777629] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
480[ 6.793404] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
481[ 6.794044] blk_update_request: I/O error, dev mmcblk0, sector 612214 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
482[ 6.795681] EXT4-fs warning (device mmcblk0p4): ext4_dx_find_entry:1647: inode #3094: lblock 1: comm run-init: error -5 reading directory block
483run-init: can't execute '/sbin/init': Input/output error
484run-init: can't execute '/etc/in[it': Permission denied 6.908491] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
485
486[ 6.909528] CPU: 2 PID: 1 Comm: run-init Not tainted 5.6.0-1134-ayufan-g652fb97d87eb #ayufan
487[ 6.910272] Hardware name: Pine64 Rock64 (DT)
488[ 6.910659] Call trace:
489[ 6.910888] dump_backtrace+0x0/0x1d0
490[ 6.911217] show_stack+0x14/0x20
491[ 6.911517] dump_stack+0xbc/0x104
492[ 6.911822] panic+0x158/0x378
493[ 6.912097] do_exit+0x8c4/0x9c0
494[ 6.912385] do_group_exit+0x44/0xa8
495[ 6.912705] __arm64_sys_exit_group+0x14/0x18
496[ 6.913096] el0_svc_common.constprop.2+0x64/0x160
497[ 6.913521] do_el0_svc+0x20/0x80
498[ 6.913818] el0_sync_handler+0xe4/0x188
499[ 6.914169] el0_sync+0x140/0x180
500[ 6.914470] SMP: stopping secondary CPUs
501[ 6.914824] Kernel Offset: disabled
502[ 6.915135] CPU features: 0x00002,20002004
503[ 6.915497] Memory Limit: none
504[ 6.915774] Rebooting in 10 seconds..