· 6 years ago · Dec 26, 2019, 11:56 AM
1Booting Linux on physical CPU 0x0
2Linux version 5.4.6 (vlad@vlad) (gcc version 7.3.1 20180622 (release) [ARM/embed ded-7-branch revision 261907] (15:7-2018-q2-6+b1)) #3 Thu Dec 26 01:56:25 MSK 20 19
3CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
4CPU: VIVT data cache, VIVT instruction cache
5OF: fdt: Machine model: Atmel AT91SAM9M10G45-EK
6Memory policy: Data cache writeback
7Built 1 zonelists, mobility grouping off. Total pages: 4064
8Kernel command line: console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot /kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootwait
9Dentry cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
10Inode-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
11mem auto-init: stack:off, heap alloc:off, heap free:off
12Memory: 7200K/16384K available (5887K kernel code, 189K rwdata, 2224K rodata, 24 4K init, 125K bss, 9184K reserved, 0K cma-reserved)
13NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
14random: get_random_bytes called from start_kernel+0x24c/0x42c with crng_init=0
15clocksource: pit: mask: 0x7ffffff max_cycles: 0x7ffffff, max_idle_ns: 7167226906 ns
16Console: colour dummy device 80x30
17sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 16777215996093 750ns
18Calibrating delay loop... 198.76 BogoMIPS (lpj=775168)
19pid_max: default: 32768 minimum: 301
20Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
21Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
22CPU: Testing write buffer coherency: ok
23Setting up static identity map for 0x70008400 - 0x7000847c
24devtmpfs: initialized
25Duplicate name in fb@0x00500000, renamed to "display#1"
26clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1493 1722236523437 ns
27futex hash table entries: 256 (order: -1, 3072 bytes, linear)
28pinctrl core: initialized pinctrl subsystem
29NET: Registered protocol family 16
30DMA: preallocated 256 KiB pool for atomic coherent allocations
31AT91: PM: standby: standby, suspend: ulp0
32No ATAGs?
33gpio-at91 fffff200.gpio: at address (ptrval)
34gpio-at91 fffff400.gpio: at address (ptrval)
35gpio-at91 fffff600.gpio: at address (ptrval)
36gpio-at91 fffff800.gpio: at address (ptrval)
37gpio-at91 fffffa00.gpio: at address (ptrval)
38pinctrl-at91 fffff200.pinctrl: initialized AT91 pinctrl driver
39atmel_tcb fff7c000.timer: IRQ index 1 not found
40atmel_tcb fff7c000.timer: IRQ index 2 not found
41atmel_tcb fffd4000.timer: IRQ index 1 not found
42atmel_tcb fffd4000.timer: IRQ index 2 not found
43at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy set slave ), 8 channels
44AT91: Detected SoC family: at91sam9g45
45AT91: Detected SoC: at91sam9g45, revision 2
46SCSI subsystem initialized
47usbcore: registered new interface driver usbfs
48usbcore: registered new interface driver hub
49usbcore: registered new device driver usb
50at91_i2c fff84000.i2c: can't get DMA channel, continue without DMA support
51at91_i2c fff84000.i2c: AT91 i2c bus driver (hw version: 0x302).
52at91_i2c fff88000.i2c: can't get DMA channel, continue without DMA support
53at91_i2c fff88000.i2c: AT91 i2c bus driver (hw version: 0x302).
54videodev: Linux video capture interface: v2.00
55pps_core: LinuxPPS API ver. 1 registered
56pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@l inux.it>
57PTP clock support registered
58Advanced Linux Sound Architecture Driver Initialized.
59clocksource: Switched to clocksource pit
60NET: Registered protocol family 2
61tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
62TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
63TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
64TCP: Hash tables configured (established 1024 bind 1024)
65UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
66UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
67NET: Registered protocol family 1
68RPC: Registered named UNIX socket transport module.
69RPC: Registered udp transport module.
70RPC: Registered tcp transport module.
71RPC: Registered tcp NFSv4.1 backchannel transport module.
72Initialise system trusted keyrings
73workingset: timestamp_bits=30 max_order=11 bucket_order=0
74Key type asymmetric registered
75Asymmetric key parser 'x509' registered
76io scheduler mq-deadline registered
77io scheduler kyber registered
78atmel_lcdfb 500000.fb: 500000.fb supply lcd not found, using dummy regulator
79atmel_lcdfb 500000.fb: 510KiB frame buffer at 70c80000 (mapped at (ptrval))
80Console: switching to colour frame buffer device 120x45
81atmel_lcdfb 500000.fb: fb0: Atmel LCDC at 0x00500000 (mapped at (ptrval)), irq 3 5
82brd: module loaded
83loop: module loaded
84atmel_usart_serial.0.auto: ttyS0 at MMIO 0xffffee00 (irq = 16, base_baud = 83333 33) is a ATMEL_SERIAL
85printk: console [ttyS0] enabled
86atmel_usart_serial.1.auto: ttyS2 at MMIO 0xfff90000 (irq = 23, base_baud = 83333 33) is a ATMEL_SERIAL
87nand: No NAND device found
88atmel-nand-controller 40000000.nand: NAND scan failed: -19
89atmel_spi fffa4000.spi: can not allocate dma coherent memory
90mtd_dataflash@0 enforce active low on chipselect handle
91atmel_spi fffa4000.spi: Atmel SPI Controller version 0x210 at 0xfffa4000 (irq 33 )
92libphy: Fixed MDIO Bus: probed
93macb fffbc000.ethernet: invalid hw address, using random
94libphy: MACB_mii_bus: probed
95random: fast init done
96macb fffbc000.ethernet (unnamed net_device) (uninitialized): no PHY found
97ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
98ehci-atmel: EHCI Atmel driver
99atmel-ehci 800000.ehci: EHCI Host Controller
100atmel-ehci 800000.ehci: new USB bus registered, assigned bus number 1
101atmel-ehci 800000.ehci: irq 36, io mem 0x00800000
102atmel-ehci 800000.ehci: USB 2.0 started, EHCI 1.00
103usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
104usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
105usb usb1: Product: EHCI Host Controller
106usb usb1: Manufacturer: Linux 5.4.6 ehci_hcd
107usb usb1: SerialNumber: 800000.ehci
108hub 1-0:1.0: USB hub found
109hub 1-0:1.0: 2 ports detected
110ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
111ohci-atmel: OHCI Atmel driver
112at91_ohci 700000.ohci: USB Host Controller
113at91_ohci 700000.ohci: new USB bus registered, assigned bus number 2
114at91_ohci 700000.ohci: irq 36, io mem 0x00700000
115usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
116usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
117usb usb2: Product: USB Host Controller
118usb usb2: Manufacturer: Linux 5.4.6 ohci_hcd
119usb usb2: SerialNumber: at91
120hub 2-0:1.0: USB hub found
121hub 2-0:1.0: 2 ports detected
122usbcore: registered new interface driver cdc_acm
123cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
124usbcore: registered new interface driver usb-storage
125usbcore: registered new interface driver usbserial_generic
126usbserial: USB Serial support registered for generic
127usbcore: registered new interface driver ftdi_sio
128usbserial: USB Serial support registered for FTDI USB Serial Device
129usbcore: registered new interface driver pl2303
130usbserial: USB Serial support registered for pl2303
131atmel_usba_udc 600000.gadget: MMIO registers at [mem 0xfff78000-0xfff783ff] mapp ed at (ptrval)
132atmel_usba_udc 600000.gadget: FIFO at [mem 0x00600000-0x0067ffff] mapped at (ptr val)
133g_serial gadget: Gadget Serial v2.4
134g_serial gadget: g_serial ready
135at91_rtc fffffdb0.rtc: registered as rtc0
136at91_rtc fffffdb0.rtc: AT91 Real Time Clock driver.
137rtc-at91sam9 fffffd20.rtc: rtc1: SET TIME!
138rtc-at91sam9 fffffd20.rtc: registered as rtc1
139at91-reset fffffd00.rstc: Starting after wakeup
140at91_wdt fffffd40.watchdog: watchdog is disabled
141at91_wdt: probe of fffffd40.watchdog failed with error -22
142atmel_mci fff80000.mmc: version: 0x410
143atmel_mci fff80000.mmc: using dma0chan1 for DMA transfers
144atmel_mci fff80000.mmc: Atmel MCI controller at 0xfff80000 irq 31, 1 slots
145atmel_mci fffd0000.mmc: version: 0x410
146atmel_mci fffd0000.mmc: using dma0chan2 for DMA transfers
147atmel_mci fffd0000.mmc: Atmel MCI controller at 0xfffd0000 irq 32, 1 slots
148usbcore: registered new interface driver usbhid
149usbhid: USB HID core driver
150iio iio:device0: Resolution used: 10 bits
151input: at91_adc as /devices/platform/ahb/ahb:apb/fffb0000.adc/input/input0
152NET: Registered protocol family 10
153Segment Routing with IPv6
154sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
155NET: Registered protocol family 17
156Loading compiled-in X.509 certificates
157input: gpio_keys as /devices/platform/gpio_keys/input/input1
158at91_rtc fffffdb0.rtc: setting system clock to 2007-01-01T00:00:10 UTC (11676096 10)
159cfg80211: Loading compiled-in X.509 certificates for regulatory database
160cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
161ALSA device list:
162 No soundcards found.
163platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
164cfg80211: failed to load regulatory.db
165Waiting for root device /dev/mmcblk0p2...