· 6 years ago · Dec 05, 2019, 10:50 PM
1livecd ~ # dmesg
2[ 0.000000] Linux version 4.19.86-gentoo (root@catalyst) (gcc version 9.2.0 (Gentoo 9.2.0-r2 p3)) #1 SMP Thu Dec 5 03:16:36 UTC 2019
3[ 0.000000] Command line: BOOT_IMAGE=/boot/gentoo root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot
4[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
5[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
6[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
7[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
8[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
9[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
10[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
11[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
12[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
13[ 0.000000] BIOS-provided physical RAM map:
14[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
15[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
16[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
17[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
18[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
19[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved
20[ 0.000000] BIOS-e820: [mem 0x0000000040400000-0x00000000c01f8fff] usable
21[ 0.000000] BIOS-e820: [mem 0x00000000c01f9000-0x00000000c01f9fff] ACPI NVS
22[ 0.000000] BIOS-e820: [mem 0x00000000c01fa000-0x00000000c01fafff] reserved
23[ 0.000000] BIOS-e820: [mem 0x00000000c01fb000-0x00000000c8b15fff] usable
24[ 0.000000] BIOS-e820: [mem 0x00000000c8b16000-0x00000000c8ff2fff] reserved
25[ 0.000000] BIOS-e820: [mem 0x00000000c8ff3000-0x00000000c947cfff] usable
26[ 0.000000] BIOS-e820: [mem 0x00000000c947d000-0x00000000c94f7fff] ACPI NVS
27[ 0.000000] BIOS-e820: [mem 0x00000000c94f8000-0x00000000c9e40fff] reserved
28[ 0.000000] BIOS-e820: [mem 0x00000000c9e41000-0x00000000c9ffefff] type 20
29[ 0.000000] BIOS-e820: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable
30[ 0.000000] BIOS-e820: [mem 0x00000000ca000000-0x00000000cf7fffff] reserved
31[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
32[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
33[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
34[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
35[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
36[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
37[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082f7fffff] usable
38[ 0.000000] NX (Execute Disable) protection: active
39[ 0.000000] efi: EFI v2.70 by American Megatrends
40[ 0.000000] efi: ACPI 2.0=0xc947d000 ACPI=0xc947d000 SMBIOS=0xc9b93000 SMBIOS 3.0=0xc9b92000 MEMATTR=0xc4cf0018 ESRT=0xc70b8318
41[ 0.000000] SMBIOS 3.1.1 present.
42[ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z370P D3/Z370P D3-CF, BIOS F14 08/13/2019
43[ 0.000000] tsc: Detected 3000.000 MHz processor
44[ 0.001867] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
45[ 0.001868] e820: remove [mem 0x000a0000-0x000fffff] usable
46[ 0.001873] last_pfn = 0x82f800 max_arch_pfn = 0x400000000
47[ 0.001875] MTRR default type: write-back
48[ 0.001875] MTRR fixed ranges enabled:
49[ 0.001876] 00000-9FFFF write-back
50[ 0.001876] A0000-BFFFF uncachable
51[ 0.001877] C0000-FFFFF write-protect
52[ 0.001877] MTRR variable ranges enabled:
53[ 0.001878] 0 base 00E0000000 mask 7FE0000000 uncachable
54[ 0.001879] 1 base 00D0000000 mask 7FF0000000 uncachable
55[ 0.001879] 2 base 00CC000000 mask 7FFC000000 uncachable
56[ 0.001879] 3 base 00CB000000 mask 7FFF000000 uncachable
57[ 0.001880] 4 disabled
58[ 0.001880] 5 disabled
59[ 0.001880] 6 disabled
60[ 0.001880] 7 disabled
61[ 0.001881] 8 disabled
62[ 0.001881] 9 disabled
63[ 0.002591] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
64[ 0.002757] last_pfn = 0xca000 max_arch_pfn = 0x400000000
65[ 0.007666] esrt: Reserving ESRT space from 0x00000000c70b8318 to 0x00000000c70b8350.
66[ 0.007675] Using GB pages for direct mapping
67[ 0.007676] BRK [0x03601000, 0x03601fff] PGTABLE
68[ 0.007677] BRK [0x03602000, 0x03602fff] PGTABLE
69[ 0.007678] BRK [0x03603000, 0x03603fff] PGTABLE
70[ 0.007710] BRK [0x03604000, 0x03604fff] PGTABLE
71[ 0.007861] BRK [0x03605000, 0x03605fff] PGTABLE
72[ 0.007913] BRK [0x03606000, 0x03606fff] PGTABLE
73[ 0.008328] Secure boot could not be determined
74[ 0.008329] RAMDISK: [mem 0x3758f000-0x37abefff]
75[ 0.008333] ACPI: Early table checksum verification disabled
76[ 0.008335] ACPI: RSDP 0x00000000C947D000 000024 (v02 ALASKA)
77[ 0.008337] ACPI: XSDT 0x00000000C947D0B0 0000E4 (v01 ALASKA A M I 01072009 AMI 00010013)
78[ 0.008341] ACPI: FACP 0x00000000C94A7D08 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
79[ 0.008344] ACPI: DSDT 0x00000000C947D230 02AAD3 (v02 ALASKA A M I 01072009 INTL 20160422)
80[ 0.008346] ACPI: FACS 0x00000000C94F7F00 000040
81[ 0.008347] ACPI: APIC 0x00000000C94A7E20 0000A0 (v03 ALASKA A M I 01072009 AMI 00010013)
82[ 0.008349] ACPI: FPDT 0x00000000C94A7EC0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
83[ 0.008351] ACPI: FIDT 0x00000000C94A7F08 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
84[ 0.008352] ACPI: MCFG 0x00000000C94A7FA8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
85[ 0.008354] ACPI: SSDT 0x00000000C94A7FE8 0003A3 (v01 ALASKA A M I 00001000 INTL 20160422)
86[ 0.008356] ACPI: SSDT 0x00000000C94A8390 0084C0 (v01 ALASKA A M I 00000001 INTL 20160422)
87[ 0.008358] ACPI: SSDT 0x00000000C94B0850 003165 (v02 ALASKA A M I 00003000 INTL 20160422)
88[ 0.008360] ACPI: HPET 0x00000000C94B39B8 000038 (v01 ALASKA A M I 00000001 MSFT 0000005F)
89[ 0.008362] ACPI: SSDT 0x00000000C94B39F0 0011AA (v02 ALASKA A M I 00001000 INTL 20160422)
90[ 0.008364] ACPI: SSDT 0x00000000C94B4BA0 002AD7 (v02 ALASKA A M I 00000000 INTL 20160422)
91[ 0.008365] ACPI: UEFI 0x00000000C94B7678 000042 (v01 ALASKA A M I 00000002 01000013)
92[ 0.008367] ACPI: SSDT 0x00000000C94B76C0 0017AE (v02 ALASKA A M I 00003000 INTL 20160422)
93[ 0.008369] ACPI: LPIT 0x00000000C94B8E70 000094 (v01 ALASKA A M I 00000000 MSFT 0000005F)
94[ 0.008370] ACPI: SSDT 0x00000000C94B8F08 000141 (v02 ALASKA A M I 00000000 INTL 20160422)
95[ 0.008372] ACPI: SSDT 0x00000000C94B9050 00029F (v02 ALASKA A M I 00000000 INTL 20160422)
96[ 0.008374] ACPI: SSDT 0x00000000C94B92F0 003002 (v02 ALASKA A M I 00001000 INTL 20160422)
97[ 0.008376] ACPI: SSDT 0x00000000C94BC2F8 000517 (v02 ALASKA A M I 00000000 INTL 20160422)
98[ 0.008377] ACPI: SSDT 0x00000000C94BC810 0002E9 (v02 ALASKA A M I 00000001 INTL 20160422)
99[ 0.008379] ACPI: DBGP 0x00000000C94BCB00 000034 (v01 ALASKA A M I 00000002 MSFT 0000005F)
100[ 0.008381] ACPI: DBG2 0x00000000C94BCB38 000054 (v00 ALASKA A M I 00000002 MSFT 0000005F)
101[ 0.008383] ACPI: DMAR 0x00000000C94BCB90 0000A8 (v01 ALASKA A M I 00000001 INTL 00000001)
102[ 0.008384] ACPI: BGRT 0x00000000C94BCC38 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
103[ 0.008386] ACPI: WSMT 0x00000000C94BCC70 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
104[ 0.008392] ACPI: Local APIC address 0xfee00000
105[ 0.008413] Zone ranges:
106[ 0.008413] DMA [mem 0x0000000000001000-0x0000000000ffffff]
107[ 0.008414] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
108[ 0.008415] Normal [mem 0x0000000100000000-0x000000082f7fffff]
109[ 0.008416] Movable zone start for each node
110[ 0.008416] Early memory node ranges
111[ 0.008417] node 0: [mem 0x0000000000001000-0x0000000000057fff]
112[ 0.008417] node 0: [mem 0x0000000000059000-0x000000000009dfff]
113[ 0.008418] node 0: [mem 0x0000000000100000-0x000000003fffffff]
114[ 0.008418] node 0: [mem 0x0000000040400000-0x00000000c01f8fff]
115[ 0.008419] node 0: [mem 0x00000000c01fb000-0x00000000c8b15fff]
116[ 0.008419] node 0: [mem 0x00000000c8ff3000-0x00000000c947cfff]
117[ 0.008420] node 0: [mem 0x00000000c9fff000-0x00000000c9ffffff]
118[ 0.008420] node 0: [mem 0x0000000100000000-0x000000082f7fffff]
119[ 0.008422] Reserved but unavailable: 98 pages
120[ 0.008423] Initmem setup node 0 [mem 0x0000000000001000-0x000000082f7fffff]
121[ 0.008424] On node 0 totalpages: 8356667
122[ 0.008425] DMA zone: 56 pages used for memmap
123[ 0.008425] DMA zone: 23 pages reserved
124[ 0.008426] DMA zone: 3996 pages, LIFO batch:0
125[ 0.008467] DMA32 zone: 11185 pages used for memmap
126[ 0.008468] DMA32 zone: 818079 pages, LIFO batch:63
127[ 0.017171] Normal zone: 103012 pages used for memmap
128[ 0.017171] Normal zone: 7534592 pages, LIFO batch:63
129[ 0.091705] Reserving Intel graphics memory at [mem 0xcb800000-0xcf7fffff]
130[ 0.091872] ACPI: PM-Timer IO Port: 0x1808
131[ 0.091873] ACPI: Local APIC address 0xfee00000
132[ 0.091876] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
133[ 0.091877] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
134[ 0.091878] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
135[ 0.091878] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
136[ 0.091878] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
137[ 0.091879] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
138[ 0.091904] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
139[ 0.091906] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
140[ 0.091907] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
141[ 0.091908] ACPI: IRQ0 used by override.
142[ 0.091909] ACPI: IRQ9 used by override.
143[ 0.091910] Using ACPI (MADT) for SMP configuration information
144[ 0.091911] ACPI: HPET id: 0x8086a201 base: 0xfed00000
145[ 0.091914] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
146[ 0.091925] [mem 0xcf800000-0xf7ffffff] available for PCI devices
147[ 0.091926] Booting paravirtualized kernel on bare hardware
148[ 0.091928] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
149[ 0.130155] random: get_random_bytes called from start_kernel+0x8e/0x4c4 with crng_init=0
150[ 0.130159] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
151[ 0.130252] percpu: Embedded 42 pages/cpu s132440 r8192 d31400 u262144
152[ 0.130255] pcpu-alloc: s132440 r8192 d31400 u262144 alloc=1*2097152
153[ 0.130256] pcpu-alloc: [0] 0 1 2 3 4 5 - -
154[ 0.130268] Built 1 zonelists, mobility grouping on. Total pages: 8242391
155[ 0.130269] Kernel command line: BOOT_IMAGE=/boot/gentoo root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot
156[ 0.131407] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
157[ 0.131938] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
158[ 0.173788] Memory: 32764376K/33426668K available (10252K kernel code, 1096K rwdata, 2084K rodata, 1156K init, 1836K bss, 662292K reserved, 0K cma-reserved)
159[ 0.173823] Kernel/User page tables isolation: enabled
160[ 0.173880] rcu: Hierarchical RCU implementation.
161[ 0.173881] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
162[ 0.173881] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
163[ 0.173993] NR_IRQS: 4352, nr_irqs: 1536, preallocated irqs: 16
164[ 0.174277] Console: colour dummy device 80x25
165[ 0.174372] console [tty0] enabled
166[ 0.174376] ACPI: Core revision 20180810
167[ 0.174654] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
168[ 0.174685] hpet clockevent registered
169[ 0.174719] APIC: Switch to symmetric I/O mode setup
170[ 0.175915] x2apic: IRQ remapping doesn't support X2APIC mode
171[ 0.180149] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
172[ 0.224693] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b3e459bf4c, max_idle_ns: 440795289890 ns
173[ 0.224696] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.00 BogoMIPS (lpj=30000000)
174[ 0.224699] pid_max: default: 32768 minimum: 301
175[ 0.225352] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
176[ 0.225384] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
177[ 0.225484] CPU0: Thermal monitoring enabled (TM1)
178[ 0.225500] process: using mwait in idle threads
179[ 0.225502] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
180[ 0.225503] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
181[ 0.225505] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
182[ 0.225507] Spectre V2 : Mitigation: Full generic retpoline
183[ 0.225508] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
184[ 0.225509] Spectre V2 : Enabling Restricted Speculation for firmware calls
185[ 0.225510] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
186[ 0.225512] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
187[ 0.225513] MDS: Mitigation: Clear CPU buffers
188[ 0.225514] TAA: Mitigation: Clear CPU buffers
189[ 0.225704] Freeing SMP alternatives memory: 28K
190[ 0.227246] TSC deadline timer enabled
191[ 0.227251] smpboot: CPU0: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (family: 0x6, model: 0x9e, stepping: 0xa)
192[ 0.227295] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
193[ 0.227317] ... version: 4
194[ 0.227318] ... bit width: 48
195[ 0.227319] ... generic registers: 8
196[ 0.227319] ... value mask: 0000ffffffffffff
197[ 0.227320] ... max period: 00007fffffffffff
198[ 0.227321] ... fixed-purpose events: 3
199[ 0.227322] ... event mask: 00000007000000ff
200[ 0.227346] rcu: Hierarchical SRCU implementation.
201[ 0.227418] smp: Bringing up secondary CPUs ...
202[ 0.227457] x86: Booting SMP configuration:
203[ 0.227459] .... node #0, CPUs: #1 #2 #3 #4 #5
204[ 0.229632] smp: Brought up 1 node, 6 CPUs
205[ 0.229634] smpboot: Max logical packages: 1
206[ 0.229636] smpboot: Total of 6 processors activated (36000.00 BogoMIPS)
207[ 0.233119] devtmpfs: initialized
208[ 0.233300] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
209[ 0.233303] futex hash table entries: 2048 (order: 5, 131072 bytes)
210[ 0.233382] NET: Registered protocol family 16
211[ 0.233493] cpuidle: using governor ladder
212[ 0.233539] KVM setup pv remote TLB flush
213[ 0.233539] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
214[ 0.233539] ACPI: bus type PCI registered
215[ 0.233539] dca service started, version 1.12.1
216[ 0.233539] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
217[ 0.233539] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
218[ 0.233539] PCI: Using configuration type 1 for base access
219[ 0.234328] ACPI: Added _OSI(Module Device)
220[ 0.234328] ACPI: Added _OSI(Processor Device)
221[ 0.234328] ACPI: Added _OSI(3.0 _SCP Extensions)
222[ 0.234328] ACPI: Added _OSI(Processor Aggregator Device)
223[ 0.234328] ACPI: Added _OSI(Linux-Dell-Video)
224[ 0.234328] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
225[ 0.251021] ACPI: 12 ACPI AML tables successfully acquired and loaded
226[ 1.170706] ACPI: Dynamic OEM Table Load:
227[ 1.170706] ACPI: SSDT 0xFFFF88882C39D000 000693 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
228[ 1.171091] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
229[ 1.171769] ACPI: Dynamic OEM Table Load:
230[ 1.171773] ACPI: SSDT 0xFFFF88880F14AC00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
231[ 1.172007] ACPI: Dynamic OEM Table Load:
232[ 1.172011] ACPI: SSDT 0xFFFF88880F0CBF00 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
233[ 1.172202] ACPI: Dynamic OEM Table Load:
234[ 1.172205] ACPI: SSDT 0xFFFF88880F0CC800 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422)
235[ 1.172566] ACPI: Dynamic OEM Table Load:
236[ 1.172571] ACPI: SSDT 0xFFFF88882C395000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
237[ 1.173012] ACPI: Dynamic OEM Table Load:
238[ 1.173012] ACPI: SSDT 0xFFFF88880F14A400 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
239[ 1.173339] ACPI: Dynamic OEM Table Load:
240[ 1.173343] ACPI: SSDT 0xFFFF88882C08EC00 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
241[ 1.174631] ACPI: Interpreter enabled
242[ 1.174636] ACPI: (supports S0 S5)
243[ 1.174638] ACPI: Using IOAPIC for interrupt routing
244[ 1.174658] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
245[ 1.175170] ACPI: Enabled 8 GPEs in block 00 to 7F
246[ 1.187772] ACPI: Power Resource [FN00] (off)
247[ 1.187821] ACPI: Power Resource [FN01] (off)
248[ 1.187868] ACPI: Power Resource [FN02] (off)
249[ 1.187915] ACPI: Power Resource [FN03] (off)
250[ 1.187961] ACPI: Power Resource [FN04] (off)
251[ 1.188707] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
252[ 1.188710] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
253[ 1.188791] acpi PNP0A08:00: _OSC: platform does not support [PME]
254[ 1.188865] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
255[ 1.188866] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
256[ 1.188988] PCI host bridge to bus 0000:00
257[ 1.188990] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
258[ 1.188991] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
259[ 1.188993] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
260[ 1.188994] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
261[ 1.188996] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
262[ 1.188997] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
263[ 1.188998] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
264[ 1.189000] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
265[ 1.189001] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
266[ 1.189002] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
267[ 1.189004] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
268[ 1.189005] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
269[ 1.189006] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
270[ 1.189008] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
271[ 1.189009] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
272[ 1.189010] pci_bus 0000:00: root bus resource [mem 0xcf800000-0xf7ffffff window]
273[ 1.189012] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
274[ 1.189013] pci_bus 0000:00: root bus resource [bus 00-3e]
275[ 1.189019] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
276[ 1.189193] pci 0000:00:02.0: [8086:3e92] type 00 class 0x030000
277[ 1.189200] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
278[ 1.189204] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
279[ 1.189207] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
280[ 1.189215] pci 0000:00:02.0: BAR 2: assigned to efifb
281[ 1.189306] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
282[ 1.189314] pci 0000:00:08.0: reg 0x10: [mem 0xf712e000-0xf712efff 64bit]
283[ 1.189420] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
284[ 1.189437] pci 0000:00:14.0: reg 0x10: [mem 0xf7110000-0xf711ffff 64bit]
285[ 1.189488] pci 0000:00:14.0: PME# supported from D3hot D3cold
286[ 1.189628] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
287[ 1.189648] pci 0000:00:16.0: reg 0x10: [mem 0xf712d000-0xf712dfff 64bit]
288[ 1.189705] pci 0000:00:16.0: PME# supported from D3hot
289[ 1.189823] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
290[ 1.189837] pci 0000:00:17.0: reg 0x10: [mem 0xf7128000-0xf7129fff]
291[ 1.189842] pci 0000:00:17.0: reg 0x14: [mem 0xf712c000-0xf712c0ff]
292[ 1.189848] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
293[ 1.189853] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
294[ 1.189858] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
295[ 1.189864] pci 0000:00:17.0: reg 0x24: [mem 0xf712b000-0xf712b7ff]
296[ 1.189893] pci 0000:00:17.0: PME# supported from D3hot
297[ 1.189980] pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
298[ 1.190033] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
299[ 1.190132] pci 0000:00:1b.2: [8086:a2e9] type 01 class 0x060400
300[ 1.190189] pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold
301[ 1.190290] pci 0000:00:1b.3: [8086:a2ea] type 01 class 0x060400
302[ 1.190346] pci 0000:00:1b.3: PME# supported from D0 D3hot D3cold
303[ 1.190447] pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400
304[ 1.190503] pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
305[ 1.190612] pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
306[ 1.190657] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
307[ 1.190751] pci 0000:00:1c.2: [8086:a292] type 01 class 0x060400
308[ 1.190798] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
309[ 1.190895] pci 0000:00:1c.3: [8086:a293] type 01 class 0x060400
310[ 1.190943] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
311[ 1.191039] pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400
312[ 1.191095] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
313[ 1.191203] pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
314[ 1.191258] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
315[ 1.191382] pci 0000:00:1f.0: [8086:a2c9] type 00 class 0x060100
316[ 1.191550] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
317[ 1.191561] pci 0000:00:1f.2: reg 0x10: [mem 0xf7124000-0xf7127fff]
318[ 1.191671] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
319[ 1.191692] pci 0000:00:1f.3: reg 0x10: [mem 0xf7120000-0xf7123fff 64bit]
320[ 1.191713] pci 0000:00:1f.3: reg 0x20: [mem 0xf7100000-0xf710ffff 64bit]
321[ 1.191751] pci 0000:00:1f.3: PME# supported from D3hot D3cold
322[ 1.191885] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
323[ 1.191944] pci 0000:00:1f.4: reg 0x10: [mem 0xf712a000-0xf712a0ff 64bit]
324[ 1.192013] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
325[ 1.192180] pci 0000:00:1b.0: PCI bridge to [bus 01]
326[ 1.192208] pci 0000:00:1b.2: PCI bridge to [bus 02]
327[ 1.192235] pci 0000:00:1b.3: PCI bridge to [bus 03]
328[ 1.192261] pci 0000:00:1b.4: PCI bridge to [bus 04]
329[ 1.192287] pci 0000:00:1c.0: PCI bridge to [bus 05]
330[ 1.192322] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
331[ 1.192346] pci 0000:06:00.0: reg 0x10: [io 0xe000-0xe0ff]
332[ 1.192368] pci 0000:06:00.0: reg 0x18: [mem 0xf7000000-0xf7000fff 64bit]
333[ 1.192382] pci 0000:06:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
334[ 1.192463] pci 0000:06:00.0: supports D1 D2
335[ 1.192464] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
336[ 1.192538] pci 0000:00:1c.2: PCI bridge to [bus 06]
337[ 1.192540] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
338[ 1.192542] pci 0000:00:1c.2: bridge window [mem 0xf7000000-0xf70fffff]
339[ 1.192545] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
340[ 1.192564] pci 0000:00:1c.3: PCI bridge to [bus 07]
341[ 1.192591] pci 0000:00:1c.4: PCI bridge to [bus 08]
342[ 1.192617] pci 0000:00:1d.0: PCI bridge to [bus 09]
343[ 1.192651] pci_bus 0000:00: on NUMA node 0
344[ 1.193364] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
345[ 1.193398] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
346[ 1.193431] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
347[ 1.193464] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
348[ 1.193496] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
349[ 1.193528] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
350[ 1.193560] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
351[ 1.193592] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
352[ 1.194697] pci 0000:00:02.0: vgaarb: setting as boot VGA device
353[ 1.194697] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
354[ 1.194697] pci 0000:00:02.0: vgaarb: bridge control possible
355[ 1.194697] vgaarb: loaded
356[ 1.194697] SCSI subsystem initialized
357[ 1.194697] ACPI: bus type USB registered
358[ 1.194697] usbcore: registered new interface driver usbfs
359[ 1.194697] usbcore: registered new interface driver hub
360[ 1.195057] usbcore: registered new device driver usb
361[ 1.195057] pps_core: LinuxPPS API ver. 1 registered
362[ 1.195057] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
363[ 1.195057] PTP clock support registered
364[ 1.195085] Registered efivars operations
365[ 1.195085] PCI: Using ACPI for IRQ routing
366[ 1.200064] PCI: pci_cache_line_size set to 64 bytes
367[ 1.200104] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
368[ 1.200105] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
369[ 1.200105] e820: reserve RAM buffer [mem 0xc01f9000-0xc3ffffff]
370[ 1.200106] e820: reserve RAM buffer [mem 0xc8b16000-0xcbffffff]
371[ 1.200106] e820: reserve RAM buffer [mem 0xc947d000-0xcbffffff]
372[ 1.200107] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
373[ 1.200108] e820: reserve RAM buffer [mem 0x82f800000-0x82fffffff]
374[ 1.201268] clocksource: Switched to clocksource tsc-early
375[ 1.201268] VFS: Disk quotas dquot_6.6.0
376[ 1.201268] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
377[ 1.204692] pnp: PnP ACPI init
378[ 1.204692] system 00:00: [mem 0x40000000-0x403fffff] has been reserved
379[ 1.204692] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
380[ 1.204692] system 00:01: [io 0x0a00-0x0a2f] has been reserved
381[ 1.204692] system 00:01: [io 0x0a30-0x0a3f] has been reserved
382[ 1.204692] system 00:01: [io 0x0a40-0x0a4f] has been reserved
383[ 1.204692] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
384[ 1.204692] pnp 00:02: [dma 0 disabled]
385[ 1.204692] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
386[ 1.204692] system 00:03: [io 0x0680-0x069f] has been reserved
387[ 1.204692] system 00:03: [io 0xffff] has been reserved
388[ 1.204692] system 00:03: [io 0xffff] has been reserved
389[ 1.204692] system 00:03: [io 0xffff] has been reserved
390[ 1.204692] system 00:03: [io 0x1800-0x18fe] has been reserved
391[ 1.204692] system 00:03: [io 0x164e-0x164f] has been reserved
392[ 1.204692] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
393[ 1.204692] system 00:04: [io 0x0800-0x087f] has been reserved
394[ 1.204692] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
395[ 1.204692] system 00:05: [io 0x1854-0x1857] has been reserved
396[ 1.204692] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
397[ 1.204692] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
398[ 1.204692] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
399[ 1.204692] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
400[ 1.204692] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
401[ 1.204692] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
402[ 1.204692] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
403[ 1.204692] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
404[ 1.204692] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
405[ 1.204692] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
406[ 1.204692] system 00:06: [mem 0xf7fe0000-0xf7ffffff] has been reserved
407[ 1.204692] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
408[ 1.204692] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
409[ 1.204692] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
410[ 1.204692] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
411[ 1.204692] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
412[ 1.204692] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
413[ 1.204692] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
414[ 1.204692] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
415[ 1.204692] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
416[ 1.204692] system 00:08: [io 0xff00-0xfffe] has been reserved
417[ 1.204692] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
418[ 1.204692] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
419[ 1.204692] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
420[ 1.204692] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
421[ 1.204692] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
422[ 1.204692] pnp: PnP ACPI: found 10 devices
423[ 1.206235] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
424[ 1.206273] pci 0000:00:1b.0: PCI bridge to [bus 01]
425[ 1.206280] pci 0000:00:1b.2: PCI bridge to [bus 02]
426[ 1.206287] pci 0000:00:1b.3: PCI bridge to [bus 03]
427[ 1.206293] pci 0000:00:1b.4: PCI bridge to [bus 04]
428[ 1.206300] pci 0000:00:1c.0: PCI bridge to [bus 05]
429[ 1.206306] pci 0000:00:1c.2: PCI bridge to [bus 06]
430[ 1.206308] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
431[ 1.206311] pci 0000:00:1c.2: bridge window [mem 0xf7000000-0xf70fffff]
432[ 1.206314] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
433[ 1.206317] pci 0000:00:1c.3: PCI bridge to [bus 07]
434[ 1.206323] pci 0000:00:1c.4: PCI bridge to [bus 08]
435[ 1.206330] pci 0000:00:1d.0: PCI bridge to [bus 09]
436[ 1.206337] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
437[ 1.206338] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
438[ 1.206339] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
439[ 1.206339] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
440[ 1.206340] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
441[ 1.206340] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
442[ 1.206341] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
443[ 1.206342] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
444[ 1.206342] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
445[ 1.206343] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
446[ 1.206344] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
447[ 1.206344] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
448[ 1.206345] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
449[ 1.206345] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
450[ 1.206346] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
451[ 1.206347] pci_bus 0000:00: resource 19 [mem 0xcf800000-0xf7ffffff window]
452[ 1.206347] pci_bus 0000:00: resource 20 [mem 0xfd000000-0xfe7fffff window]
453[ 1.206348] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
454[ 1.206349] pci_bus 0000:06: resource 1 [mem 0xf7000000-0xf70fffff]
455[ 1.206349] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
456[ 1.206425] NET: Registered protocol family 2
457[ 1.206498] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
458[ 1.206521] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
459[ 1.206671] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
460[ 1.206737] TCP: Hash tables configured (established 262144 bind 65536)
461[ 1.206752] UDP hash table entries: 16384 (order: 7, 524288 bytes)
462[ 1.206790] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
463[ 1.206845] NET: Registered protocol family 1
464[ 1.206890] RPC: Registered named UNIX socket transport module.
465[ 1.206892] RPC: Registered udp transport module.
466[ 1.206893] RPC: Registered tcp transport module.
467[ 1.206893] RPC: Registered tcp NFSv4.1 backchannel transport module.
468[ 1.206899] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
469[ 1.207057] PCI: CLS 64 bytes, default 64
470[ 1.207071] Trying to unpack rootfs image as initramfs...
471[ 1.560510] Freeing initrd memory: 5312K
472[ 1.560519] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
473[ 1.560521] software IO TLB: mapped [mem 0xc0cf0000-0xc4cf0000] (64MB)
474[ 1.560595] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
475[ 1.560597] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
476[ 1.560598] RAPL PMU: hw unit of domain package 2^-14 Joules
477[ 1.560599] RAPL PMU: hw unit of domain dram 2^-14 Joules
478[ 1.560600] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
479[ 1.560601] RAPL PMU: hw unit of domain psys 2^-14 Joules
480[ 1.560698] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e459bf4c, max_idle_ns: 440795289890 ns
481[ 1.560708] clocksource: Switched to clocksource tsc
482[ 1.560722] platform rtc_cmos: registered platform RTC device (no PNP device found)
483[ 1.560950] Initialise system trusted keyrings
484[ 1.560968] workingset: timestamp_bits=62 max_order=23 bucket_order=0
485[ 1.561150] squashfs: version 4.0 (2009/01/31) Phillip Lougher
486[ 1.561192] NFS: Registering the id_resolver key type
487[ 1.561194] Key type id_resolver registered
488[ 1.561195] Key type id_legacy registered
489[ 1.561200] ntfs: driver 2.1.32 [Flags: R/O].
490[ 1.561208] SGI XFS with ACLs, security attributes, realtime, no debug enabled
491[ 1.561382] Key type asymmetric registered
492[ 1.561383] Asymmetric key parser 'x509' registered
493[ 1.561387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
494[ 1.561389] io scheduler noop registered
495[ 1.561389] io scheduler deadline registered (default)
496[ 1.561391] io scheduler mq-deadline registered (default)
497[ 1.561392] io scheduler kyber registered
498[ 1.561630] pcieport 0000:00:1b.2: AER enabled with IRQ 120
499[ 1.561746] pcieport 0000:00:1b.3: AER enabled with IRQ 121
500[ 1.561856] pcieport 0000:00:1b.4: AER enabled with IRQ 122
501[ 1.562027] pcieport 0000:00:1c.2: AER enabled with IRQ 123
502[ 1.562130] pcieport 0000:00:1c.3: AER enabled with IRQ 124
503[ 1.562237] pcieport 0000:00:1c.4: AER enabled with IRQ 125
504[ 1.562347] pcieport 0000:00:1d.0: AER enabled with IRQ 126
505[ 1.562395] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
506[ 1.583073] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
507[ 1.583265] Linux agpgart interface v0.103
508[ 1.583288] efifb: probing for efifb
509[ 1.583294] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
510[ 1.583296] efifb: mode is 1024x768x32, linelength=4096, pages=1
511[ 1.583296] efifb: scrolling: redraw
512[ 1.583298] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
513[ 1.584295] Console: switching to colour frame buffer device 128x48
514[ 1.585243] fb0: EFI VGA frame buffer device
515[ 1.585426] Monitor-Mwait will be used to enter C-1 state
516[ 1.585430] Monitor-Mwait will be used to enter C-2 state
517[ 1.585433] Monitor-Mwait will be used to enter C-3 state
518[ 1.586200] ioatdma: Intel(R) QuickData Technology Driver 4.00
519[ 1.587789] brd: module loaded
520[ 1.588467] loop: module loaded
521[ 1.588476] Loading iSCSI transport class v2.0-870.
522[ 1.588543] st: Version 20160209, fixed bufsize 32768, s/g segs 256
523[ 1.588575] SCSI Media Changer driver v0.25
524[ 1.588588] Atheros(R) L2 Ethernet Driver - version 2.2.3
525[ 1.588597] Copyright (c) 2007 Atheros Corporation.
526[ 1.588616] jme: JMicron JMC2XX ethernet driver version 1.0.8
527[ 1.588649] i8042: PNP: No PS/2 controller found.
528[ 1.588688] mousedev: PS/2 mouse device common for all mice
529[ 1.588726] rtc_cmos rtc_cmos: RTC can wake from S4
530[ 1.589160] rtc_cmos rtc_cmos: registered as rtc0
531[ 1.589176] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
532[ 1.589196] IR NEC protocol handler initialized
533[ 1.589204] IR RC5(x/sz) protocol handler initialized
534[ 1.589212] IR RC6 protocol handler initialized
535[ 1.589523] IR JVC protocol handler initialized
536[ 1.589824] IR Sony protocol handler initialized
537[ 1.590120] IR SANYO protocol handler initialized
538[ 1.590415] IR Sharp protocol handler initialized
539[ 1.590701] IR MCE Keyboard/mouse protocol handler initialized
540[ 1.590986] IR XMP protocol handler initialized
541[ 1.591272] intel_pstate: Intel P-state driver initializing
542[ 1.592636] intel_pstate: HWP enabled
543[ 1.592939] hidraw: raw HID events driver (C) Jiri Kosina
544[ 1.593254] usbcore: registered new interface driver usbhid
545[ 1.593535] usbhid: USB HID core driver
546[ 1.593895] NET: Registered protocol family 17
547[ 1.594219] Key type dns_resolver registered
548[ 1.594964] mce: Using 12 MCE banks
549[ 1.595258] sched_clock: Marking stable (1604447868, -9535206)->(1604104861, -9192199)
550[ 1.595933] registered taskstats version 1
551[ 1.596245] Loading compiled-in X.509 certificates
552[ 1.597255] rtc_cmos rtc_cmos: setting system clock to 2019-12-05 22:29:54 UTC (1575584994)
553[ 1.598083] Freeing unused kernel image memory: 1156K
554[ 1.654815] Write protecting the kernel read-only data: 16384k
555[ 1.655665] Freeing unused kernel image memory: 2016K
556[ 1.656241] Freeing unused kernel image memory: 2012K
557[ 1.656676] Run /init as init process
558[ 1.784471] libata version 3.00 loaded.
559[ 1.867803] ahci 0000:00:17.0: version 3.0
560[ 1.884845] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
561[ 1.884846] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
562[ 2.035298] scsi host0: ahci
563[ 2.035356] scsi host1: ahci
564[ 2.035605] scsi host2: ahci
565[ 2.035725] scsi host3: ahci
566[ 2.035775] scsi host4: ahci
567[ 2.035881] scsi host5: ahci
568[ 2.035904] ata1: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b100 irq 127
569[ 2.035905] ata2: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b180 irq 127
570[ 2.035906] ata3: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b200 irq 127
571[ 2.035907] ata4: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b280 irq 127
572[ 2.035908] ata5: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b300 irq 127
573[ 2.035909] ata6: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b380 irq 127
574[ 2.374822] ata1: SATA link down (SStatus 4 SControl 300)
575[ 2.374836] ata6: SATA link down (SStatus 4 SControl 300)
576[ 2.374849] ata5: SATA link down (SStatus 4 SControl 300)
577[ 2.374864] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
578[ 2.374898] ata4: SATA link down (SStatus 4 SControl 300)
579[ 2.377113] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)
580[ 2.377116] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT1._GTF, AE_NOT_FOUND (20180810/psparse-514)
581[ 2.377224] ata2.00: supports DRM functions and may not be fully accessible
582[ 2.377969] ata2.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT03B6Q, max UDMA/133
583[ 2.377970] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
584[ 2.380368] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.PRT1._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)
585[ 2.380371] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT1._GTF, AE_NOT_FOUND (20180810/psparse-514)
586[ 2.380476] ata2.00: supports DRM functions and may not be fully accessible
587[ 2.383131] ata2.00: configured for UDMA/133
588[ 2.383306] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 860 3B6Q PQ: 0 ANSI: 5
589[ 2.383579] ata2.00: Enabling discard_zeroes_data
590[ 2.383602] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
591[ 2.383606] sd 1:0:0:0: [sda] Write Protect is off
592[ 2.383607] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
593[ 2.383612] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
594[ 2.383672] ata2.00: Enabling discard_zeroes_data
595[ 2.384767] ata3: SATA link down (SStatus 4 SControl 300)
596[ 2.385033] sda: sda1 sda2 sda3
597[ 2.385266] ata2.00: Enabling discard_zeroes_data
598[ 2.385305] sd 1:0:0:0: [sda] Attached SCSI disk
599[ 2.406443] sd 1:0:0:0: Attached scsi generic sg0 type 0
600[ 2.658375] GDT-HA: Storage RAID Controller Driver. Version: 3.05
601[ 2.905757] Fusion MPT base driver 3.04.20
602[ 2.905758] Copyright (c) 1999-2008 LSI Corporation
603[ 2.909189] Fusion MPT SPI Host driver 3.04.20
604[ 2.911398] Fusion MPT FC Host driver 3.04.20
605[ 2.913609] Fusion MPT SAS Host driver 3.04.20
606[ 2.915114] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
607[ 2.916450] 3ware Storage Controller device driver for Linux v1.26.02.003.
608[ 2.917853] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
609[ 2.929222] Adaptec aacraid driver 1.2.1[50877]-custom
610[ 2.932061] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
611[ 2.932476] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
612[ 2.935066] megasas: 07.706.03.00-rc1
613[ 2.941246] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.08-k.
614[ 2.947745] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
615[ 2.952109] mpt3sas version 26.100.00.00 loaded
616[ 2.957386] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
617[ 2.957693] ehci-pci: EHCI PCI platform driver
618[ 2.967734] usbcore: registered new interface driver usb-storage
619[ 2.971631] uhci_hcd: USB Universal Host Controller Interface driver
620[ 2.973273] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
621[ 2.977670] xhci_hcd 0000:00:14.0: xHCI Host Controller
622[ 2.977674] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
623[ 2.978723] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
624[ 2.978727] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
625[ 2.979112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
626[ 2.979113] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
627[ 2.979127] usb usb1: Product: xHCI Host Controller
628[ 2.979128] usb usb1: Manufacturer: Linux 4.19.86-gentoo xhci-hcd
629[ 2.979128] usb usb1: SerialNumber: 0000:00:14.0
630[ 2.979284] hub 1-0:1.0: USB hub found
631[ 2.979330] hub 1-0:1.0: 16 ports detected
632[ 2.980697] xhci_hcd 0000:00:14.0: xHCI Host Controller
633[ 2.980699] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
634[ 2.980701] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
635[ 2.980923] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
636[ 2.980924] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
637[ 2.980925] usb usb2: Product: xHCI Host Controller
638[ 2.980925] usb usb2: Manufacturer: Linux 4.19.86-gentoo xhci-hcd
639[ 2.980926] usb usb2: SerialNumber: 0000:00:14.0
640[ 2.981088] hub 2-0:1.0: USB hub found
641[ 2.981100] hub 2-0:1.0: 10 ports detected
642[ 2.981675] usb: port power management may be unreliable
643[ 3.042067] device-mapper: uevent: version 1.0.3
644[ 3.042124] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
645[ 3.234737] raid6: sse2x1 gen() 14304 MB/s
646[ 3.344743] usb 1-3: new high-speed USB device number 2 using xhci_hcd
647[ 3.404740] raid6: sse2x1 xor() 9881 MB/s
648[ 3.537902] usb 1-3: string descriptor 0 read error: -71
649[ 3.537904] usb 1-3: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.12
650[ 3.537905] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
651[ 3.538656] usb-storage 1-3:1.0: USB Mass Storage device detected
652[ 3.538981] scsi host6: usb-storage 1-3:1.0
653[ 3.574738] raid6: sse2x2 gen() 18391 MB/s
654[ 3.684742] usb 1-9: new low-speed USB device number 3 using xhci_hcd
655[ 3.744736] raid6: sse2x2 xor() 11917 MB/s
656[ 3.870610] usb 1-9: New USB device found, idVendor=413c, idProduct=2003, bcdDevice= 1.00
657[ 3.870611] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
658[ 3.870612] usb 1-9: Product: Dell USB Keyboard
659[ 3.870613] usb 1-9: Manufacturer: Dell
660[ 3.876233] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:413C:2003.0001/input/input0
661[ 3.914736] raid6: sse2x4 gen() 21541 MB/s
662[ 3.944887] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-9/input0
663[ 4.084737] raid6: sse2x4 xor() 12970 MB/s
664[ 4.254730] raid6: avx2x1 gen() 29028 MB/s
665[ 4.424729] raid6: avx2x1 xor() 18840 MB/s
666[ 4.566490] scsi 6:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
667[ 4.566666] sd 6:0:0:0: Attached scsi generic sg1 type 0
668[ 4.567488] sd 6:0:0:0: [sdb] 15974400 512-byte logical blocks: (8.18 GB/7.62 GiB)
669[ 4.568193] sd 6:0:0:0: [sdb] Write Protect is off
670[ 4.568195] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
671[ 4.568951] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
672[ 4.572187] sdb: sdb1 sdb2
673[ 4.574117] sd 6:0:0:0: [sdb] Attached SCSI removable disk
674[ 4.594741] raid6: avx2x2 gen() 35819 MB/s
675[ 4.764729] raid6: avx2x2 xor() 22023 MB/s
676[ 4.934730] raid6: avx2x4 gen() 41557 MB/s
677[ 5.104730] raid6: avx2x4 xor() 25126 MB/s
678[ 5.104730] raid6: using algorithm avx2x4 gen() 41557 MB/s
679[ 5.104731] raid6: .... xor() 25126 MB/s, rmw enabled
680[ 5.104731] raid6: using avx2x2 recovery algorithm
681[ 5.105134] xor: automatically using best checksumming function avx
682[ 5.105476] async_tx: api initialized (async)
683[ 5.107809] device-mapper: raid: Loading target version 1.14.0
684[ 5.207000] Btrfs loaded, crc32c=crc32c-generic
685[ 5.211819] JFS: nTxBlock = 8192, nTxLock = 65536
686[ 5.228454] fuse init (API version 7.27)
687[ 5.255684] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
688[ 5.255685] e1000: Copyright (c) 1999-2006 Intel Corporation.
689[ 5.259800] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
690[ 5.259801] igb: Copyright (c) 2007-2014 Intel Corporation.
691[ 5.261171] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
692[ 5.264518] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
693[ 5.297691] libphy: r8169: probed
694[ 5.297884] r8169 0000:06:00.0 eth0: RTL8168g/8111g, e0:d5:5e:e0:66:e4, XID 4c000800, IRQ 129
695[ 5.297885] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
696[ 5.299476] sky2: driver version 1.30
697[ 5.304100] VMware vmxnet3 virtual NIC driver - version 1.4.16.0-k-NAPI
698[ 5.309896] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
699[ 5.312781] vxge: Copyright(c) 2002-2010 Exar Corp.
700[ 5.312781] vxge: Driver version: 2.5.3.22640-k
701[ 5.322993] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
702[ 5.327257] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
703[ 5.327257] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
704[ 5.328882] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
705[ 5.328882] ixgb: Copyright (c) 1999-2008 Intel Corporation.
706[ 10.842422] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
707[ 10.889680] ufs: ufs was compiled with read-only support, can't be mounted as read-write
708[ 10.890882] F2FS-fs (sda2): Magic Mismatch, valid(0xf2f52010) - read(0x1)
709[ 10.890883] F2FS-fs (sda2): Can't find valid F2FS filesystem in 1th superblock
710[ 10.890909] F2FS-fs (sda2): Magic Mismatch, valid(0xf2f52010) - read(0x0)
711[ 10.890909] F2FS-fs (sda2): Can't find valid F2FS filesystem in 2th superblock
712[ 10.890911] F2FS-fs (sda2): Magic Mismatch, valid(0xf2f52010) - read(0x1)
713[ 10.890911] F2FS-fs (sda2): Can't find valid F2FS filesystem in 1th superblock
714[ 10.890912] F2FS-fs (sda2): Magic Mismatch, valid(0xf2f52010) - read(0x0)
715[ 10.890912] F2FS-fs (sda2): Can't find valid F2FS filesystem in 2th superblock
716[ 10.893121] random: fast init done
717[ 10.900475] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
718[ 10.957959] ISO 9660 Extensions: Microsoft Joliet Level 3
719[ 10.960269] ISO 9660 Extensions: Microsoft Joliet Level 3
720[ 10.961592] ISO 9660 Extensions: RRIP_1991A
721[ 13.952890] random: lvm: uninitialized urandom read (4 bytes read)
722[ 13.964633] random: lvm: uninitialized urandom read (4 bytes read)
723[ 14.458613] udevd[9919]: starting version 3.2.9
724[ 14.496322] random: udevd: uninitialized urandom read (16 bytes read)
725[ 14.508180] udevd[9919]: starting eudev-3.2.9
726[ 14.529280] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
727[ 14.529343] ACPI: Sleep Button [SLPB]
728[ 14.529367] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
729[ 14.529418] ACPI: Power Button [PWRB]
730[ 14.529475] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
731[ 14.529593] ACPI: Power Button [PWRF]
732[ 14.764954] r8169 0000:06:00.0 enp6s0: renamed from eth0
733[ 14.834088] EFI Variables Facility v0.08 2004-May-17
734[ 15.067981] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
735[ 15.131629] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
736[ 15.131630] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
737[ 15.131631] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
738[ 15.131632] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
739[ 15.131632] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
740[ 15.131633] snd_hda_codec_realtek hdaudioC0D0: inputs:
741[ 15.131634] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
742[ 15.131634] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
743[ 15.131635] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
744[ 15.142256] random: crng init done
745[ 15.142256] random: 7 urandom warning(s) missed due to ratelimiting
746[ 15.146372] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
747[ 15.146604] hdaudio hdaudioC0D2: Unable to bind the codec
748[ 15.147379] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
749[ 15.147429] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
750[ 15.147478] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
751[ 15.147524] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
752[ 15.147574] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
753[ 15.271753] warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
754[ 16.566852] ACPI: Invalid passive threshold
755[ 16.567003] thermal LNXTHERM:00: registered as thermal_zone1
756[ 16.567003] ACPI: Thermal Zone [TZ10] (17 C)
757[ 16.674925] thermal LNXTHERM:01: registered as thermal_zone2
758[ 16.674926] ACPI: Thermal Zone [TZ00] (28 C)
759[ 16.675047] thermal LNXTHERM:02: registered as thermal_zone3
760[ 16.675047] ACPI: Thermal Zone [TZ01] (30 C)
761[ 20.236766] 8021q: 802.1Q VLAN Support v1.8
762[ 20.272192] cfg80211: Loading compiled-in X.509 certificates for regulatory database
763[ 20.273547] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
764[ 20.305479] Generic PHY r8169-600:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-600:00, irq=IGNORE)
765[ 20.476959] 8021q: adding VLAN 0 to HW filter on device bond0
766[ 23.502085] r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control rx/tx
767[ 23.866616] NET: Registered protocol family 10
768[ 23.866838] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
769[ 23.866848] Segment Routing with IPv6