· 6 years ago · Oct 12, 2019, 08:08 PM
1
2My dmesg:
3
4
5[ 0.000000] Linux version 4.19.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20)
6[ 0.000000] Command line: placeholder root=/dev/mapper/server--vg-root ro quiet
7[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
8[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
9[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
10[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
11[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
12[ 0.000000] Released 0 page(s)
13[ 0.000000] BIOS-provided physical RAM map:
14[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable
15[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
16[ 0.000000] Xen: [mem 0x0000000000100000-0x0000000009cfffff] usable
17[ 0.000000] Xen: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
18[ 0.000000] Xen: [mem 0x000000000a000000-0x000000000a1fffff] usable
19[ 0.000000] Xen: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
20[ 0.000000] Xen: [mem 0x000000000a20a000-0x000000000affffff] usable
21[ 0.000000] Xen: [mem 0x000000000b000000-0x000000000b01ffff] reserved
22[ 0.000000] Xen: [mem 0x000000000b020000-0x00000000dbb4dfff] usable
23[ 0.000000] Xen: [mem 0x00000000dbb4e000-0x00000000dbcc5fff] reserved
24[ 0.000000] Xen: [mem 0x00000000dbcc6000-0x00000000dc156fff] usable
25[ 0.000000] Xen: [mem 0x00000000dc157000-0x00000000dc2a8fff] ACPI NVS
26[ 0.000000] Xen: [mem 0x00000000dc2a9000-0x00000000dcf0ffff] reserved
27[ 0.000000] Xen: [mem 0x00000000dcf10000-0x00000000deffffff] usable
28[ 0.000000] Xen: [mem 0x00000000df000000-0x00000000dfffffff] reserved
29[ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
30[ 0.000000] Xen: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
31[ 0.000000] Xen: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
32[ 0.000000] Xen: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
33[ 0.000000] Xen: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
34[ 0.000000] Xen: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
35[ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
36[ 0.000000] Xen: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
37[ 0.000000] Xen: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
38[ 0.000000] Xen: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
39[ 0.000000] Xen: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
40[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
41[ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
42[ 0.000000] Xen: [mem 0x0000000100000000-0x00000002222bafff] usable
43[ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
44[ 0.000000] NX (Execute Disable) protection: active
45[ 0.000000] efi: EFI v2.70 by American Megatrends
46[ 0.000000] efi: ACPI 2.0=0xdc1f0000 ACPI=0xdc1f0000 SMBIOS=0xdcd42000 SMBIOS 3.0=0xdcd41000 ESRT=0xda41cc98 MEMATTR=0xda293018
47[ 0.000000] secureboot: Secure boot disabled
48[ 0.000000] SMBIOS 3.1.1 present.
49[ 0.000000] DMI: Gigabyte Technology Co., Ltd. A320M-S2H/A320M-S2H-CF, BIOS F23 08/08/2018
50[ 0.000000] Hypervisor detected: Xen PV
51[ 0.003909] tsc: Fast TSC calibration failed
52[ 0.003910] tsc: Detected 2994.458 MHz processor
53[ 0.004240] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
54[ 0.004242] e820: remove [mem 0x000a0000-0x000fffff] usable
55[ 0.004251] last_pfn = 0x2222bb max_arch_pfn = 0x400000000
56[ 0.004251] Disabled
57[ 0.004252] x86/PAT: MTRRs disabled, skipping PAT initialization too.
58[ 0.004254] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC
59[ 0.004256] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
60[ 0.004544] BRK [0x02801000, 0x02801fff] PGTABLE
61[ 0.004545] BRK [0x02802000, 0x02802fff] PGTABLE
62[ 0.005053] BRK [0x02803000, 0x02803fff] PGTABLE
63[ 0.005225] BRK [0x02804000, 0x02804fff] PGTABLE
64[ 0.005397] BRK [0x02805000, 0x02805fff] PGTABLE
65[ 0.005569] BRK [0x02806000, 0x02806fff] PGTABLE
66[ 0.005748] BRK [0x02807000, 0x02807fff] PGTABLE
67[ 0.005931] BRK [0x02808000, 0x02808fff] PGTABLE
68[ 0.006115] BRK [0x02809000, 0x02809fff] PGTABLE
69[ 0.006284] BRK [0x0280a000, 0x0280afff] PGTABLE
70[ 0.006430] BRK [0x0280b000, 0x0280bfff] PGTABLE
71[ 0.006577] BRK [0x0280c000, 0x0280cfff] PGTABLE
72[ 0.650842] RAMDISK: [mem 0x04000000-0x076c1fff]
73[ 0.650854] ACPI: Early table checksum verification disabled
74[ 0.650862] ACPI: RSDP 0x00000000DC1F0000 000024 (v02 ALASKA)
75[ 0.650867] ACPI: XSDT 0x00000000DC1F00A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
76[ 0.650898] ACPI: FACP 0x00000000DC1F7148 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
77[ 0.650965] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-624)
78[ 0.650973] ACPI: DSDT 0x00000000DC1F0200 006F48 (v02 ALASKA A M I 01072009 INTL 20120913)
79[ 0.650978] ACPI: FACS 0x00000000DC259E00 000040
80[ 0.650985] ACPI: APIC 0x00000000DC1F7260 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
81[ 0.650991] ACPI: FPDT 0x00000000DC1F7340 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
82[ 0.650997] ACPI: FIDT 0x00000000DC1F7388 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
83[ 0.651003] ACPI: SSDT 0x00000000DC1F7428 008C98 (v02 ALASKA A M I 00000002 MSFT 04000000)
84[ 0.651010] ACPI: SSDT 0x00000000DC2000C0 002314 (v01 ALASKA A M I 00000001 AMD 00000001)
85[ 0.651307] ACPI: CRAT 0x00000000DC2023D8 000F50 (v01 ALASKA A M I 00000001 AMD 00000001)
86[ 0.651316] ACPI: CDIT 0x00000000DC203328 000029 (v01 ALASKA A M I 00000001 AMD 00000001)
87[ 0.651322] ACPI: SSDT 0x00000000DC203358 002DBA (v01 ALASKA A M I 00000001 INTL 20120913)
88[ 0.651329] ACPI: MCFG 0x00000000DC206118 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
89[ 0.651337] ACPI: HPET 0x00000000DC206158 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
90[ 0.651343] ACPI: SSDT 0x00000000DC206190 000024 (v01 ALASKA A M I 00001000 INTL 20120913)
91[ 0.651351] ACPI: UEFI 0x00000000DC2061B8 000048 (v01 ALASKA A M I 00000000 00000000)
92[ 0.651358] ACPI: VFCT 0x00000000DC206200 00EE84 (v01 ALASKA A M I 00000001 AMD 31504F47)
93[ 0.651365] ACPI: BGRT 0x00000000DC215088 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
94[ 0.651372] ACPI: TPM2 0x00000000DC2150C0 000034 (v04 ALASKA A M I 00000001 AMI 00000000)
95[ 0.651379] ACPI: IVRS 0x00000000DC2150F8 0000D0 (v02 ALASKA A M I 00000001 AMD 00000000)
96[ 0.651386] ACPI: SSDT 0x00000000DC2151C8 001A41 (v01 ALASKA A M I 00000001 INTL 20120913)
97[ 0.651392] ACPI: SSDT 0x00000000DC216C10 0000F8 (v01 ALASKA A M I 00001000 INTL 20120913)
98[ 0.651399] ACPI: WSMT 0x00000000DC216D08 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
99[ 0.651419] ACPI: Local APIC address 0xfee00000
100[ 0.651421] Setting APIC routing to Xen PV.
101[ 0.651456] NUMA turned off
102[ 0.651457] Faking a node at [mem 0x0000000000000000-0x00000002222bafff]
103[ 0.651461] NODE_DATA(0) allocated [mem 0x1ff012000-0x1ff016fff]
104[ 0.665170] Zone ranges:
105[ 0.665171] DMA [mem 0x0000000000001000-0x0000000000ffffff]
106[ 0.665172] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
107[ 0.665173] Normal [mem 0x0000000100000000-0x00000002222bafff]
108[ 0.665174] Device empty
109[ 0.665175] Movable zone start for each node
110[ 0.665175] Early memory node ranges
111[ 0.665176] node 0: [mem 0x0000000000001000-0x000000000009ffff]
112[ 0.665176] node 0: [mem 0x0000000000100000-0x0000000009cfffff]
113[ 0.665177] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
114[ 0.665177] node 0: [mem 0x000000000a20a000-0x000000000affffff]
115[ 0.665178] node 0: [mem 0x000000000b020000-0x00000000dbb4dfff]
116[ 0.665178] node 0: [mem 0x00000000dbcc6000-0x00000000dc156fff]
117[ 0.665179] node 0: [mem 0x00000000dcf10000-0x00000000deffffff]
118[ 0.665179] node 0: [mem 0x0000000100000000-0x00000002222bafff]
119[ 0.665181] Reserved but unavailable: 1 pages
120[ 0.665182] Initmem setup node 0 [mem 0x0000000000001000-0x00000002222bafff]
121[ 0.665183] On node 0 totalpages: 2097151
122[ 0.665184] DMA zone: 64 pages used for memmap
123[ 0.665184] DMA zone: 21 pages reserved
124[ 0.665185] DMA zone: 3999 pages, LIFO batch:0
125[ 0.665244] DMA32 zone: 14135 pages used for memmap
126[ 0.665245] DMA32 zone: 904613 pages, LIFO batch:63
127[ 0.679298] Normal zone: 18571 pages used for memmap
128[ 0.679299] Normal zone: 1188539 pages, LIFO batch:63
129[ 0.697360] p2m virtual area at (____ptrval____), size is 40000000
130[ 0.885483] Remapped 139963 page(s)
131[ 0.885958] ACPI: PM-Timer IO Port: 0x808
132[ 0.885961] ACPI: Local APIC address 0xfee00000
133[ 0.886001] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
134[ 0.886027] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
135[ 0.886035] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
136[ 0.886044] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
137[ 0.886046] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
138[ 0.886049] ACPI: IRQ0 used by override.
139[ 0.886050] ACPI: IRQ9 used by override.
140[ 0.886058] Using ACPI (MADT) for SMP configuration information
141[ 0.886062] ACPI: HPET id: 0x10228201 base: 0xfed00000
142[ 0.886069] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
143[ 0.886092] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
144[ 0.886094] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
145[ 0.886095] PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
146[ 0.886096] PM: Registered nosave memory: [mem 0x0a200000-0x0a209fff]
147[ 0.886097] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
148[ 0.886098] PM: Registered nosave memory: [mem 0xdbb4e000-0xdbcc5fff]
149[ 0.886099] PM: Registered nosave memory: [mem 0xdc157000-0xdc2a8fff]
150[ 0.886100] PM: Registered nosave memory: [mem 0xdc2a9000-0xdcf0ffff]
151[ 0.886101] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
152[ 0.886101] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
153[ 0.886101] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
154[ 0.886102] PM: Registered nosave memory: [mem 0xfc000000-0xfd0fffff]
155[ 0.886102] PM: Registered nosave memory: [mem 0xfd100000-0xfdffffff]
156[ 0.886103] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
157[ 0.886103] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
158[ 0.886104] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
159[ 0.886104] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
160[ 0.886104] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
161[ 0.886105] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
162[ 0.886105] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
163[ 0.886106] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
164[ 0.886106] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
165[ 0.886106] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
166[ 0.886107] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
167[ 0.886107] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
168[ 0.886108] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
169[ 0.886108] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
170[ 0.886108] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
171[ 0.886109] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
172[ 0.886109] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
173[ 0.886110] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
174[ 0.886110] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
175[ 0.886110] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
176[ 0.886111] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
177[ 0.886111] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
178[ 0.886113] [mem 0xe0000000-0xf7ffffff] available for PCI devices
179[ 0.886115] Booting paravirtualized kernel on Xen
180[ 0.886115] Xen version: 4.11.2-pre (preserve-AD)
181[ 0.886118] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
182[ 0.968528] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
183[ 0.968535] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
184[ 0.969085] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u262144
185[ 0.969090] pcpu-alloc: s144408 r8192 d31720 u262144 alloc=1*2097152
186[ 0.969091] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
187[ 0.969137] xen: PV spinlocks enabled
188[ 0.969140] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
189[ 0.969143] Built 1 zonelists, mobility grouping on. Total pages: 2064360
190[ 0.969144] Policy zone: Normal
191[ 0.969145] Kernel command line: placeholder root=/dev/mapper/server--vg-root ro quiet
192[ 1.001731] software IO TLB: mapped [mem 0x21de00000-0x221e00000] (64MB)
193[ 1.021895] Memory: 8072612K/8388604K available (10252K kernel code, 1243K rwdata, 3324K rodata, 1584K init, 2280K bss, 315992K reserved, 0K cma-reserved)
194[ 1.022044] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
195[ 1.022260] ftrace: allocating 31861 entries in 125 pages
196[ 1.030303] rcu: Hierarchical RCU implementation.
197[ 1.030304] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
198[ 1.030305] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
199[ 1.032690] Using NULL legacy PIC
200[ 1.032691] NR_IRQS: 33024, nr_irqs: 1096, preallocated irqs: 0
201[ 1.032712] xen:events: Using FIFO-based ABI
202[ 1.032724] xen: --> pirq=1 -> irq=1 (gsi=1)
203[ 1.032728] xen: --> pirq=2 -> irq=2 (gsi=2)
204[ 1.032732] xen: --> pirq=3 -> irq=3 (gsi=3)
205[ 1.032736] xen: --> pirq=4 -> irq=4 (gsi=4)
206[ 1.032739] xen: --> pirq=5 -> irq=5 (gsi=5)
207[ 1.032743] xen: --> pirq=6 -> irq=6 (gsi=6)
208[ 1.032746] xen: --> pirq=7 -> irq=7 (gsi=7)
209[ 1.032749] xen: --> pirq=8 -> irq=8 (gsi=8)
210[ 1.032752] xen: --> pirq=9 -> irq=9 (gsi=9)
211[ 1.032756] xen: --> pirq=10 -> irq=10 (gsi=10)
212[ 1.032759] xen: --> pirq=11 -> irq=11 (gsi=11)
213[ 1.032762] xen: --> pirq=12 -> irq=12 (gsi=12)
214[ 1.032765] xen: --> pirq=13 -> irq=13 (gsi=13)
215[ 1.032768] xen: --> pirq=14 -> irq=14 (gsi=14)
216[ 1.032771] xen: --> pirq=15 -> irq=15 (gsi=15)
217[ 1.032803] Console: colour dummy device 80x25
218[ 1.032806] console [tty0] enabled
219[ 1.032807] console [hvc0] enabled
220[ 1.032823] ACPI: Core revision 20180810
221[ 1.050484] ACPI BIOS Warning (bug): Incorrect checksum in table [BGRT] - 0x28, should be 0xE5 (20180810/tbprint-177)
222[ 1.051374] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
223[ 1.051382] Xen: using vcpuop timer interface
224[ 1.051385] installing Xen timer for CPU 0
225[ 1.051433] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b29d223047, max_idle_ns: 440795210090 ns
226[ 1.051456] Calibrating delay loop (skipped), value calculated using timer frequency.. 5988.91 BogoMIPS (lpj=11977832)
227[ 1.051457] pid_max: default: 32768 minimum: 301
228[ 1.051508] Security Framework initialized
229[ 1.051510] Yama: disabled by default; enable with sysctl kernel.yama.*
230[ 1.051550] AppArmor: AppArmor initialized
231[ 1.053032] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
232[ 1.053874] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
233[ 1.053915] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
234[ 1.053942] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
235[ 1.054226] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
236[ 1.054227] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
237[ 1.054228] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
238[ 1.054229] Spectre V2 : Mitigation: Full AMD retpoline
239[ 1.054229] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
240[ 1.054246] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
241[ 1.054247] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
242[ 1.054353] Freeing SMP alternatives memory: 24K
243[ 1.055986] cpu 0 spinlock event irq 57
244[ 1.055993] VPMU disabled by hypervisor.
245[ 1.056114] Performance Events: PMU not available due to virtualization, using software events only.
246[ 1.056163] rcu: Hierarchical SRCU implementation.
247[ 1.056524] random: crng done (trusting CPU's manufacturer)
248[ 1.056546] NMI watchdog: Perf NMI watchdog permanently disabled
249[ 1.056730] smp: Bringing up secondary CPUs ...
250[ 1.056831] installing Xen timer for CPU 1
251[ 1.057042] cpu 1 spinlock event irq 69
252[ 1.057042] installing Xen timer for CPU 2
253[ 1.057042] cpu 2 spinlock event irq 76
254[ 1.057042] installing Xen timer for CPU 3
255[ 1.057042] cpu 3 spinlock event irq 83
256[ 1.057042] installing Xen timer for CPU 4
257[ 1.057042] cpu 4 spinlock event irq 90
258[ 1.057042] installing Xen timer for CPU 5
259[ 1.057042] cpu 5 spinlock event irq 97
260[ 1.057042] installing Xen timer for CPU 6
261[ 1.057042] cpu 6 spinlock event irq 104
262[ 1.057042] installing Xen timer for CPU 7
263[ 1.057042] cpu 7 spinlock event irq 111
264[ 1.057042] installing Xen timer for CPU 8
265[ 1.057042] cpu 8 spinlock event irq 118
266[ 1.057042] installing Xen timer for CPU 9
267[ 1.057042] cpu 9 spinlock event irq 125
268[ 1.059444] installing Xen timer for CPU 10
269[ 1.059589] cpu 10 spinlock event irq 132
270[ 1.059589] installing Xen timer for CPU 11
271[ 1.059667] cpu 11 spinlock event irq 139
272[ 1.059667] installing Xen timer for CPU 12
273[ 1.059667] cpu 12 spinlock event irq 146
274[ 1.059667] installing Xen timer for CPU 13
275[ 1.059667] cpu 13 spinlock event irq 153
276[ 1.059667] installing Xen timer for CPU 14
277[ 1.059667] cpu 14 spinlock event irq 160
278[ 1.059667] installing Xen timer for CPU 15
279[ 1.059667] cpu 15 spinlock event irq 167
280[ 1.059667] smp: Brought up 1 node, 16 CPUs
281[ 1.059667] smpboot: Max logical packages: 1
282[ 1.059774] devtmpfs: initialized
283[ 1.059774] x86/mm: Memory block size: 128MB
284[ 1.060211] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a209fff] (40960 bytes)
285[ 1.060211] PM: Registering ACPI NVS region [mem 0xdc157000-0xdc2a8fff] (1384448 bytes)
286[ 1.060211] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
287[ 1.060211] futex hash table entries: 4096 (order: 6, 262144 bytes)
288[ 1.060211] pinctrl core: initialized pinctrl subsystem
289[ 1.060211] NET: Registered protocol family 16
290[ 1.060211] xen:grant_table: Grant tables using version 1 layout
291[ 1.060211] Grant table initialized
292[ 1.060245] audit: initializing netlink subsys (disabled)
293[ 1.060256] audit: type=2000 audit(1570899192.713:1): state=initialized audit_enabled=0 res=1
294[ 1.063457] ACPI: bus type PCI registered
295[ 1.063459] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
296[ 1.063648] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
297[ 1.063651] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
298[ 1.071416] PCI: Using configuration type 1 for base access
299[ 1.072231] ACPI: Added _OSI(Module Device)
300[ 1.072231] ACPI: Added _OSI(Processor Device)
301[ 1.072231] ACPI: Added _OSI(3.0 _SCP Extensions)
302[ 1.072231] ACPI: Added _OSI(Processor Aggregator Device)
303[ 1.072231] ACPI: Added _OSI(Linux-Dell-Video)
304[ 1.072231] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
305[ 1.088554] ACPI: 7 ACPI AML tables successfully acquired and loaded
306[ 1.089318] xen: registering gsi 9 triggering 0 polarity 1
307[ 1.091128] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
308[ 1.095580] ACPI: Interpreter enabled
309[ 1.095594] ACPI: (supports S0 S3 S4 S5)
310[ 1.095594] ACPI: Using IOAPIC for interrupt routing
311[ 1.095961] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
312[ 1.096211] ACPI: Enabled 2 GPEs in block 00 to 1F
313[ 1.103855] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
314[ 1.103858] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
315[ 1.104075] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
316[ 1.104281] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
317[ 1.104290] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
318[ 1.104714] PCI host bridge to bus 0000:00
319[ 1.104716] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
320[ 1.104717] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
321[ 1.104718] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
322[ 1.104719] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
323[ 1.104720] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
324[ 1.104721] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
325[ 1.104722] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
326[ 1.104723] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
327[ 1.104724] pci_bus 0000:00: root bus resource [bus 00-ff]
328[ 1.104734] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
329[ 1.104876] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
330[ 1.105067] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
331[ 1.105200] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
332[ 1.105760] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
333[ 1.105915] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
334[ 1.106050] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
335[ 1.106173] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
336[ 1.106728] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
337[ 1.106875] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
338[ 1.107014] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
339[ 1.107136] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
340[ 1.107205] pci 0000:00:07.1: enabling Extended Tags
341[ 1.107511] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
342[ 1.107659] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
343[ 1.107785] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
344[ 1.107855] pci 0000:00:08.1: enabling Extended Tags
345[ 1.107976] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
346[ 1.108157] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
347[ 1.108390] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
348[ 1.108631] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
349[ 1.108739] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
350[ 1.108844] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
351[ 1.108950] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
352[ 1.109056] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
353[ 1.109162] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
354[ 1.109271] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
355[ 1.109376] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
356[ 1.109622] pci 0000:01:00.0: [1022:43bc] type 00 class 0x0c0330
357[ 1.109663] pci 0000:01:00.0: reg 0x10: [mem 0xfe7a0000-0xfe7a7fff 64bit]
358[ 1.109819] pci 0000:01:00.0: PME# supported from D3hot D3cold
359[ 1.109939] pci 0000:01:00.1: [1022:43b8] type 00 class 0x010601
360[ 1.110036] pci 0000:01:00.1: reg 0x24: [mem 0xfe780000-0xfe79ffff]
361[ 1.110050] pci 0000:01:00.1: reg 0x30: [mem 0xfe700000-0xfe77ffff pref]
362[ 1.110132] pci 0000:01:00.1: PME# supported from D3hot D3cold
363[ 1.110221] pci 0000:01:00.2: [1022:43b3] type 01 class 0x060400
364[ 1.110376] pci 0000:01:00.2: PME# supported from D3hot D3cold
365[ 1.110513] pci 0000:00:01.3: PCI bridge to [bus 01-06]
366[ 1.110520] pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
367[ 1.110525] pci 0000:00:01.3: bridge window [mem 0xfe500000-0xfe7fffff]
368[ 1.110532] pci 0000:00:01.3: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
369[ 1.110662] pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
370[ 1.110832] pci 0000:02:04.0: PME# supported from D3hot D3cold
371[ 1.110947] pci 0000:02:05.0: [1022:43b4] type 01 class 0x060400
372[ 1.111117] pci 0000:02:05.0: PME# supported from D3hot D3cold
373[ 1.111232] pci 0000:02:06.0: [1022:43b4] type 01 class 0x060400
374[ 1.111401] pci 0000:02:06.0: PME# supported from D3hot D3cold
375[ 1.111520] pci 0000:02:07.0: [1022:43b4] type 01 class 0x060400
376[ 1.111690] pci 0000:02:07.0: PME# supported from D3hot D3cold
377[ 1.111833] pci 0000:01:00.2: PCI bridge to [bus 02-06]
378[ 1.111842] pci 0000:01:00.2: bridge window [io 0xf000-0xffff]
379[ 1.111846] pci 0000:01:00.2: bridge window [mem 0xfe500000-0xfe6fffff]
380[ 1.111855] pci 0000:01:00.2: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
381[ 1.111922] pci 0000:02:04.0: PCI bridge to [bus 03]
382[ 1.112000] pci 0000:02:05.0: PCI bridge to [bus 04]
383[ 1.112117] pci 0000:05:00.0: [8086:08b1] type 00 class 0x028000
384[ 1.112199] pci 0000:05:00.0: reg 0x10: [mem 0xfe600000-0xfe601fff 64bit]
385[ 1.112475] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
386[ 1.112720] pci 0000:02:06.0: PCI bridge to [bus 05]
387[ 1.112733] pci 0000:02:06.0: bridge window [mem 0xfe600000-0xfe6fffff]
388[ 1.112828] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
389[ 1.112882] pci 0000:06:00.0: reg 0x10: [io 0xf000-0xf0ff]
390[ 1.112937] pci 0000:06:00.0: reg 0x18: [mem 0xfe500000-0xfe500fff 64bit]
391[ 1.112970] pci 0000:06:00.0: reg 0x20: [mem 0xf0300000-0xf0303fff 64bit pref]
392[ 1.113190] pci 0000:06:00.0: supports D1 D2
393[ 1.113191] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
394[ 1.113427] pci 0000:02:07.0: PCI bridge to [bus 06]
395[ 1.113438] pci 0000:02:07.0: bridge window [io 0xf000-0xffff]
396[ 1.113443] pci 0000:02:07.0: bridge window [mem 0xfe500000-0xfe5fffff]
397[ 1.113451] pci 0000:02:07.0: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
398[ 1.113616] pci 0000:07:00.0: [1002:699f] type 00 class 0x030000
399[ 1.113661] pci 0000:07:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
400[ 1.113682] pci 0000:07:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
401[ 1.113696] pci 0000:07:00.0: reg 0x20: [io 0xe000-0xe0ff]
402[ 1.113710] pci 0000:07:00.0: reg 0x24: [mem 0xfe900000-0xfe93ffff]
403[ 1.113724] pci 0000:07:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
404[ 1.113748] pci 0000:07:00.0: BAR 0: assigned to efifb
405[ 1.113838] pci 0000:07:00.0: supports D1 D2
406[ 1.113839] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
407[ 1.113985] pci 0000:07:00.1: [1002:aae0] type 00 class 0x040300
408[ 1.114022] pci 0000:07:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit]
409[ 1.114164] pci 0000:07:00.1: supports D1 D2
410[ 1.114292] pci 0000:00:03.1: PCI bridge to [bus 07]
411[ 1.114299] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
412[ 1.114303] pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
413[ 1.114310] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
414[ 1.114515] pci 0000:08:00.0: [1022:145a] type 00 class 0x130000
415[ 1.114590] pci 0000:08:00.0: enabling Extended Tags
416[ 1.114736] pci 0000:08:00.2: [1022:1456] type 00 class 0x108000
417[ 1.114773] pci 0000:08:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff]
418[ 1.114797] pci 0000:08:00.2: reg 0x24: [mem 0xfe400000-0xfe401fff]
419[ 1.114814] pci 0000:08:00.2: enabling Extended Tags
420[ 1.114992] pci 0000:08:00.3: [1022:145c] type 00 class 0x0c0330
421[ 1.115024] pci 0000:08:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit]
422[ 1.115088] pci 0000:08:00.3: enabling Extended Tags
423[ 1.115158] pci 0000:08:00.3: PME# supported from D0 D3hot D3cold
424[ 1.115275] pci 0000:00:07.1: PCI bridge to [bus 08]
425[ 1.115285] pci 0000:00:07.1: bridge window [mem 0xfe200000-0xfe4fffff]
426[ 1.115523] pci 0000:09:00.0: [1022:1455] type 00 class 0x130000
427[ 1.115600] pci 0000:09:00.0: enabling Extended Tags
428[ 1.115751] pci 0000:09:00.2: [1022:7901] type 00 class 0x010601
429[ 1.115832] pci 0000:09:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff]
430[ 1.115854] pci 0000:09:00.2: enabling Extended Tags
431[ 1.115931] pci 0000:09:00.2: PME# supported from D3hot D3cold
432[ 1.116022] pci 0000:09:00.3: [1022:1457] type 00 class 0x040300
433[ 1.116045] pci 0000:09:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff]
434[ 1.116101] pci 0000:09:00.3: enabling Extended Tags
435[ 1.116173] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
436[ 1.116289] pci 0000:00:08.1: PCI bridge to [bus 09]
437[ 1.116300] pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
438[ 1.116569] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
439[ 1.116641] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
440[ 1.116704] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
441[ 1.116782] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
442[ 1.116851] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
443[ 1.116908] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
444[ 1.116965] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
445[ 1.117022] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
446[ 1.117064] xen: registering gsi 7 triggering 0 polarity 1
447[ 1.117538] xen: registering gsi 8 triggering 1 polarity 0
448[ 1.117671] xen:balloon: Initialising balloon driver
449[ 1.117732] pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
450[ 1.117732] pci 0000:07:00.0: vgaarb: bridge control possible
451[ 1.117732] pci 0000:07:00.0: vgaarb: setting as boot device
452[ 1.117732] vgaarb: loaded
453[ 1.117732] pps_core: LinuxPPS API ver. 1 registered
454[ 1.117732] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
455[ 1.117732] PTP clock support registered
456[ 1.117732] EDAC MC: Ver: 3.0.0
457[ 1.117732] Registered efivars operations
458[ 1.143206] PCI: Using ACPI for IRQ routing
459[ 1.147558] PCI: pci_cache_line_size set to 64 bytes
460[ 1.147704] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
461[ 1.147706] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
462[ 1.147707] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
463[ 1.147707] e820: reserve RAM buffer [mem 0xdbb4e000-0xdbffffff]
464[ 1.147708] e820: reserve RAM buffer [mem 0xdc157000-0xdfffffff]
465[ 1.147709] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
466[ 1.147709] e820: reserve RAM buffer [mem 0x2222bb000-0x223ffffff]
467[ 1.147791] clocksource: Switched to clocksource tsc-early
468[ 1.154781] VFS: Disk quotas dquot_6.6.0
469[ 1.154798] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
470[ 1.154816] hugetlbfs: disabling because there are no supported hugepage sizes
471[ 1.154876] AppArmor: AppArmor Filesystem Enabled
472[ 1.154888] pnp: PnP ACPI init
473[ 1.154961] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
474[ 1.154961] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
475[ 1.154961] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
476[ 1.154961] system 00:02: [io 0x0a00-0x0a2f] has been reserved
477[ 1.154961] system 00:02: [io 0x0a30-0x0a3f] has been reserved
478[ 1.154961] system 00:02: [io 0x0a40-0x0a4f] has been reserved
479[ 1.154961] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
480[ 1.155650] system 00:03: [io 0x04d0-0x04d1] has been reserved
481[ 1.155651] system 00:03: [io 0x040b] has been reserved
482[ 1.155652] system 00:03: [io 0x04d6] has been reserved
483[ 1.155653] system 00:03: [io 0x0c00-0x0c01] has been reserved
484[ 1.155654] system 00:03: [io 0x0c14] has been reserved
485[ 1.155655] system 00:03: [io 0x0c50-0x0c51] has been reserved
486[ 1.155655] system 00:03: [io 0x0c52] has been reserved
487[ 1.155656] system 00:03: [io 0x0c6c] has been reserved
488[ 1.155657] system 00:03: [io 0x0c6f] has been reserved
489[ 1.155658] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
490[ 1.155659] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
491[ 1.155660] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
492[ 1.155661] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
493[ 1.155662] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
494[ 1.155662] system 00:03: [io 0x0800-0x089f] has been reserved
495[ 1.155663] system 00:03: [io 0x0b00-0x0b0f] has been reserved
496[ 1.155664] system 00:03: [io 0x0b20-0x0b3f] has been reserved
497[ 1.155665] system 00:03: [io 0x0900-0x090f] has been reserved
498[ 1.155666] system 00:03: [io 0x0910-0x091f] has been reserved
499[ 1.155669] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
500[ 1.155670] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
501[ 1.155671] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
502[ 1.155672] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
503[ 1.155673] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
504[ 1.155674] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
505[ 1.155675] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
506[ 1.155678] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
507[ 1.156129] pnp: PnP ACPI: found 4 devices
508[ 1.162494] PM-Timer failed consistency check (0xffffff) - aborting.
509[ 1.162591] pci 0000:02:04.0: PCI bridge to [bus 03]
510[ 1.162609] pci 0000:02:05.0: PCI bridge to [bus 04]
511[ 1.162626] pci 0000:02:06.0: PCI bridge to [bus 05]
512[ 1.162632] pci 0000:02:06.0: bridge window [mem 0xfe600000-0xfe6fffff]
513[ 1.162644] pci 0000:02:07.0: PCI bridge to [bus 06]
514[ 1.162646] pci 0000:02:07.0: bridge window [io 0xf000-0xffff]
515[ 1.162652] pci 0000:02:07.0: bridge window [mem 0xfe500000-0xfe5fffff]
516[ 1.162657] pci 0000:02:07.0: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
517[ 1.162664] pci 0000:01:00.2: PCI bridge to [bus 02-06]
518[ 1.162667] pci 0000:01:00.2: bridge window [io 0xf000-0xffff]
519[ 1.162673] pci 0000:01:00.2: bridge window [mem 0xfe500000-0xfe6fffff]
520[ 1.162677] pci 0000:01:00.2: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
521[ 1.162684] pci 0000:00:01.3: PCI bridge to [bus 01-06]
522[ 1.162687] pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
523[ 1.162691] pci 0000:00:01.3: bridge window [mem 0xfe500000-0xfe7fffff]
524[ 1.162695] pci 0000:00:01.3: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
525[ 1.162701] pci 0000:00:03.1: PCI bridge to [bus 07]
526[ 1.162703] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
527[ 1.162708] pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
528[ 1.162711] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
529[ 1.162717] pci 0000:00:07.1: PCI bridge to [bus 08]
530[ 1.162722] pci 0000:00:07.1: bridge window [mem 0xfe200000-0xfe4fffff]
531[ 1.162731] pci 0000:00:08.1: PCI bridge to [bus 09]
532[ 1.162736] pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
533[ 1.162745] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
534[ 1.162746] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
535[ 1.162747] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
536[ 1.162748] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
537[ 1.162749] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
538[ 1.162749] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
539[ 1.162750] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
540[ 1.162751] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
541[ 1.162752] pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
542[ 1.162753] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe7fffff]
543[ 1.162753] pci_bus 0000:01: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
544[ 1.162754] pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
545[ 1.162755] pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe6fffff]
546[ 1.162756] pci_bus 0000:02: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
547[ 1.162757] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff]
548[ 1.162757] pci_bus 0000:06: resource 0 [io 0xf000-0xffff]
549[ 1.162758] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff]
550[ 1.162759] pci_bus 0000:06: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
551[ 1.162760] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
552[ 1.162760] pci_bus 0000:07: resource 1 [mem 0xfe900000-0xfe9fffff]
553[ 1.162761] pci_bus 0000:07: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
554[ 1.162762] pci_bus 0000:08: resource 1 [mem 0xfe200000-0xfe4fffff]
555[ 1.162763] pci_bus 0000:09: resource 1 [mem 0xfe800000-0xfe8fffff]
556[ 1.162823] NET: Registered protocol family 2
557[ 1.162949] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
558[ 1.163004] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
559[ 1.163297] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
560[ 1.163413] TCP: Hash tables configured (established 65536 bind 65536)
561[ 1.163475] UDP hash table entries: 4096 (order: 5, 131072 bytes)
562[ 1.163506] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
563[ 1.163564] NET: Registered protocol family 1
564[ 1.163568] NET: Registered protocol family 44
565[ 1.163660] xen: registering gsi 32 triggering 0 polarity 1
566[ 1.163685] xen: --> pirq=32 -> irq=32 (gsi=32)
567[ 1.163784] pci 0000:07:00.1: Linked as a consumer to 0000:07:00.0
568[ 1.163891] xen: registering gsi 44 triggering 0 polarity 1
569[ 1.163901] xen: --> pirq=44 -> irq=44 (gsi=44)
570[ 1.163931] xen: registering gsi 37 triggering 0 polarity 1
571[ 1.163939] xen: --> pirq=37 -> irq=37 (gsi=37)
572[ 1.164293] PCI: CLS 64 bytes, default 64
573[ 1.164322] Unpacking initramfs...
574[ 1.786066] Freeing initrd memory: 56072K
575[ 1.786785] Initialise system trusted keyrings
576[ 1.786796] Key type blacklist registered
577[ 1.786878] workingset: timestamp_bits=40 max_order=21 bucket_order=0
578[ 1.787863] zbud: loaded
579[ 1.893875] Key type asymmetric registered
580[ 1.893876] Asymmetric key parser 'x509' registered
581[ 1.893890] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
582[ 1.893959] io scheduler noop registered
583[ 1.893960] io scheduler deadline registered
584[ 1.893988] io scheduler cfq registered (default)
585[ 1.893988] io scheduler mq-deadline registered
586[ 1.896059] xen: registering gsi 32 triggering 0 polarity 1
587[ 1.896069] Already setup the GSI :32
588[ 1.896331] xen: registering gsi 34 triggering 0 polarity 1
589[ 1.896340] xen: --> pirq=34 -> irq=34 (gsi=34)
590[ 1.896487] xen: registering gsi 32 triggering 0 polarity 1
591[ 1.896490] Already setup the GSI :32
592[ 1.896645] xen: registering gsi 33 triggering 0 polarity 1
593[ 1.896654] xen: --> pirq=33 -> irq=33 (gsi=33)
594[ 1.896810] xen: registering gsi 34 triggering 0 polarity 1
595[ 1.896813] Already setup the GSI :34
596[ 1.896969] xen: registering gsi 35 triggering 0 polarity 1
597[ 1.896979] xen: --> pirq=35 -> irq=35 (gsi=35)
598[ 1.897176] pcieport 0000:00:01.3: AER enabled with IRQ 170
599[ 1.897207] pcieport 0000:00:03.1: AER enabled with IRQ 171
600[ 1.897237] pcieport 0000:00:07.1: AER enabled with IRQ 172
601[ 1.897270] pcieport 0000:00:08.1: AER enabled with IRQ 173
602[ 1.897285] pcieport 0000:00:01.3: Signaling PME with IRQ 170
603[ 1.897300] pcieport 0000:00:03.1: Signaling PME with IRQ 171
604[ 1.897320] pcieport 0000:00:07.1: Signaling PME with IRQ 172
605[ 1.897342] pcieport 0000:00:08.1: Signaling PME with IRQ 173
606[ 1.897369] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
607[ 1.897378] efifb: probing for efifb
608[ 1.897380] efi: EFI_MEMMAP is not enabled.
609[ 1.898442] efifb: framebuffer at 0xe0000000, using 8100k, total 8100k
610[ 1.898443] efifb: mode is 1920x1080x32, linelength=7680, pages=1
611[ 1.898443] efifb: scrolling: redraw
612[ 1.898444] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
613[ 1.900894] Console: switching to colour frame buffer device 240x67
614[ 1.902950] fb0: EFI VGA frame buffer device
615[ 1.902989] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
616[ 1.903054] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
617[ 1.903097] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
618[ 1.903152] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
619[ 1.903346] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
620[ 1.903415] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
621[ 1.903489] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
622[ 1.903553] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
623[ 1.903621] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
624[ 1.903703] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
625[ 1.903779] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
626[ 1.903859] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
627[ 1.903932] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
628[ 1.904005] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
629[ 1.904076] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
630[ 1.904149] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
631[ 1.904208] Warning: Processor Platform Limit not supported.
632[ 1.904398] xen_mcelog: /dev/mcelog registered by Xen
633[ 1.904664] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
634[ 1.905054] hpet_acpi_add: no address or irqs in _CRS
635[ 1.905060] Linux agpgart interface v0.103
636[ 1.905523] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
637[ 1.905524] AMD IOMMUv2 functionality not available on this system
638[ 1.906859] i8042: PNP: No PS/2 controller found.
639[ 1.906932] mousedev: PS/2 mouse device common for all mice
640[ 1.906972] rtc_cmos 00:01: RTC can wake from S4
641[ 1.907061] rtc_cmos 00:01: registered as rtc0
642[ 1.907071] rtc_cmos 00:01: no alarms, y3k, 114 bytes nvram
643[ 1.907390] ledtrig-cpu: registered to indicate activity on CPUs
644[ 1.907935] NET: Registered protocol family 10
645[ 1.918173] Segment Routing with IPv6
646[ 1.918188] mip6: Mobile IPv6
647[ 1.918190] NET: Registered protocol family 17
648[ 1.918238] mpls_gso: MPLS GSO support
649[ 1.918823] mce: Using 2 MCE banks
650[ 1.918837] sched_clock: Marking stable (1900151302, 18658717)->(1920096260, -1286241)
651[ 1.919473] registered taskstats version 1
652[ 1.919473] Loading compiled-in X.509 certificates
653[ 1.943297] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
654[ 1.943313] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
655[ 1.944051] zswap: loaded using pool lzo/zbud
656[ 1.944420] AppArmor: AppArmor sha1 policy hashing enabled
657[ 1.944831] rtc_cmos 00:01: setting system clock to 2019-10-12 16:53:14 UTC (1570899194)
658[ 1.945975] Freeing unused kernel image memory: 1584K
659[ 1.983605] Write protecting the kernel read-only data: 16384k
660[ 1.988814] Freeing unused kernel image memory: 2028K
661[ 1.989083] Freeing unused kernel image memory: 772K
662[ 2.048419] x86/mm: Checked W+X mappings: passed, no W+X pages found.
663[ 2.048424] Run /init as init process
664[ 2.202202] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
665[ 2.202209] ACPI: Power Button [PWRB]
666[ 2.202254] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
667[ 2.202267] ACPI: Power Button [PWRF]
668[ 2.212108] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
669[ 2.212110] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
670[ 2.217792] SCSI subsystem initialized
671[ 2.218038] cryptd: max_cpu_qlen set to 1000
672[ 2.219430] xen: registering gsi 35 triggering 0 polarity 1
673[ 2.219452] Already setup the GSI :35
674[ 2.222441] ACPI: bus type USB registered
675[ 2.222462] usbcore: registered new interface driver usbfs
676[ 2.222469] usbcore: registered new interface driver hub
677[ 2.222533] usbcore: registered new device driver usb
678[ 2.225381] AVX2 version of gcm_enc/dec engaged.
679[ 2.225381] AES CTR mode by8 optimization enabled
680[ 2.229867] libata version 3.00 loaded.
681[ 2.233764] xen: registering gsi 32 triggering 0 polarity 1
682[ 2.233775] Already setup the GSI :32
683[ 2.233817] xhci_hcd 0000:01:00.0: xHCI Host Controller
684[ 2.233823] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
685[ 2.234809] ahci 0000:01:00.1: version 3.0
686[ 2.234856] xen: registering gsi 33 triggering 0 polarity 1
687[ 2.234860] Already setup the GSI :33
688[ 2.234977] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
689[ 2.235012] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
690[ 2.235013] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
691[ 2.235603] scsi host0: ahci
692[ 2.235800] scsi host1: ahci
693[ 2.235984] scsi host2: ahci
694[ 2.236120] scsi host3: ahci
695[ 2.236244] scsi host4: ahci
696[ 2.236389] scsi host5: ahci
697[ 2.236538] scsi host6: ahci
698[ 2.236748] scsi host7: ahci
699[ 2.236826] ata1: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780100 irq 181
700[ 2.236828] ata2: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780180 irq 181
701[ 2.236829] ata3: DUMMY
702[ 2.236830] ata4: DUMMY
703[ 2.236831] ata5: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780300 irq 181
704[ 2.236833] ata6: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780380 irq 181
705[ 2.236833] ata7: DUMMY
706[ 2.236834] ata8: DUMMY
707[ 2.236915] xen: registering gsi 42 triggering 0 polarity 1
708[ 2.236931] xen: --> pirq=42 -> irq=42 (gsi=42)
709[ 2.237171] ahci 0000:09:00.2: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
710[ 2.237173] ahci 0000:09:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs
711[ 2.237176] ahci 0000:09:00.2: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
712[ 2.237518] scsi host8: ahci
713[ 2.237683] scsi host9: ahci
714[ 2.237746] ata9: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808100 irq 183
715[ 2.237748] ata10: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808180 irq 184
716[ 2.239160] libphy: r8169: probed
717[ 2.239478] r8169 0000:06:00.0 eth0: RTL8168g/8111g, e0:d5:5e:f4:6d:39, XID 4c000800, IRQ 182
718[ 2.239481] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
719[ 2.246554] r8169 0000:06:00.0 enp6s0: renamed from eth0
720[ 2.270221] alg: No test for pcbc(aes) (pcbc-aes-aesni)
721[ 2.289166] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000008000410
722[ 2.289384] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
723[ 2.289385] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
724[ 2.289386] usb usb1: Product: xHCI Host Controller
725[ 2.289387] usb usb1: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd
726[ 2.289387] usb usb1: SerialNumber: 0000:01:00.0
727[ 2.289534] hub 1-0:1.0: USB hub found
728[ 2.289549] hub 1-0:1.0: 9 ports detected
729[ 2.289848] xhci_hcd 0000:01:00.0: xHCI Host Controller
730[ 2.289852] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
731[ 2.289855] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
732[ 2.289886] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
733[ 2.289916] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
734[ 2.289917] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
735[ 2.289918] usb usb2: Product: xHCI Host Controller
736[ 2.289919] usb usb2: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd
737[ 2.289920] usb usb2: SerialNumber: 0000:01:00.0
738[ 2.290015] hub 2-0:1.0: USB hub found
739[ 2.290025] hub 2-0:1.0: 3 ports detected
740[ 2.290265] xen: registering gsi 37 triggering 0 polarity 1
741[ 2.290274] Already setup the GSI :37
742[ 2.290429] xhci_hcd 0000:08:00.3: xHCI Host Controller
743[ 2.290432] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 3
744[ 2.290523] xhci_hcd 0000:08:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410
745[ 2.290660] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
746[ 2.290662] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
747[ 2.290662] usb usb3: Product: xHCI Host Controller
748[ 2.290663] usb usb3: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd
749[ 2.290664] usb usb3: SerialNumber: 0000:08:00.3
750[ 2.290788] hub 3-0:1.0: USB hub found
751[ 2.290797] hub 3-0:1.0: 4 ports detected
752[ 2.290996] xhci_hcd 0000:08:00.3: xHCI Host Controller
753[ 2.290999] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 4
754[ 2.291002] xhci_hcd 0000:08:00.3: Host supports USB 3.0 SuperSpeed
755[ 2.291022] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
756[ 2.291050] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
757[ 2.291052] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
758[ 2.291053] usb usb4: Product: xHCI Host Controller
759[ 2.291054] usb usb4: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd
760[ 2.291055] usb usb4: SerialNumber: 0000:08:00.3
761[ 2.291164] hub 4-0:1.0: USB hub found
762[ 2.291173] hub 4-0:1.0: 4 ports detected
763[ 2.341180] [drm] amdgpu kernel modesetting enabled.
764[ 2.350904] Parsing CRAT table with 1 nodes
765[ 2.350908] Ignoring ACPI CRAT on non-APU system
766[ 2.350910] Virtual CRAT table created for CPU
767[ 2.350911] Parsing CRAT table with 1 nodes
768[ 2.350911] Creating topology SYSFS entries
769[ 2.350919] Topology: Add CPU node
770[ 2.350919] Finished initializing topology
771[ 2.351181] kfd kfd: Initialized module
772[ 2.351652] checking generic (e0000000 7e9000) vs hw (e0000000 10000000)
773[ 2.351653] fb: switching to amdgpudrmfb from EFI VGA
774[ 2.351671] Console: switching to colour dummy device 80x25
775[ 2.353379] amdgpu 0000:07:00.0: enabling device (0006 -> 0007)
776[ 2.353426] xen: registering gsi 54 triggering 0 polarity 1
777[ 2.353450] xen: --> pirq=54 -> irq=54 (gsi=54)
778[ 2.353552] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1849:0x5001 0xC7).
779[ 2.353589] [drm] register mmio base: 0xFE900000
780[ 2.353589] [drm] register mmio size: 262144
781[ 2.353599] [drm] add ip block number 0 <vi_common>
782[ 2.353599] [drm] add ip block number 1 <gmc_v8_0>
783[ 2.353600] [drm] add ip block number 2 <tonga_ih>
784[ 2.353600] [drm] add ip block number 3 <powerplay>
785[ 2.353601] [drm] add ip block number 4 <dm>
786[ 2.353602] [drm] add ip block number 5 <gfx_v8_0>
787[ 2.353602] [drm] add ip block number 6 <sdma_v3_0>
788[ 2.353603] [drm] add ip block number 7 <uvd_v6_0>
789[ 2.353603] [drm] add ip block number 8 <vce_v3_0>
790[ 2.353605] amdgpu 0000:07:00.0: kfd not supported on this ASIC
791[ 2.353611] [drm] UVD is enabled in VM mode
792[ 2.353611] [drm] UVD ENC is enabled in VM mode
793[ 2.353613] [drm] VCE enabled in VM mode
794[ 2.354517] ATOM BIOS: 113-TIC32700-100
795[ 2.354538] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
796[ 2.354570] amdgpu 0000:07:00.0: firmware: direct-loading firmware amdgpu/polaris12_mc.bin
797[ 2.354578] amdgpu 0000:07:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
798[ 2.354579] amdgpu 0000:07:00.0: GART: 256M 0x0000000000000000 - 0x000000000FFFFFFF
799[ 2.354584] [drm] Detected VRAM RAM=2048M, BAR=256M
800[ 2.354585] [drm] RAM width 128bits GDDR5
801[ 2.354695] [TTM] Zone kernel: Available graphics memory: 4066546 kiB
802[ 2.354696] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
803[ 2.354696] [TTM] Initializing pool allocator
804[ 2.354701] [TTM] Initializing DMA pool allocator
805[ 2.384662] [drm] amdgpu: 2048M of VRAM memory ready
806[ 2.384664] [drm] amdgpu: 3072M of GTT memory ready.
807[ 2.384675] [drm] GART: num cpu pages 65536, num gpu pages 65536
808[ 2.386304] [drm] PCIE GART of 256M enabled (table at 0x000000F4007E9000).
809[ 2.386435] amdgpu 0000:07:00.0: firmware: direct-loading firmware amdgpu/polaris12_pfp_2.bin
810[ 2.386449] amdgpu 0000:07:00.0: firmware: direct-loading firmware amdgpu/polaris12_me_2.bin
811[ 2.386461] amdgpu 0000:07:00.0: firmware: direct-loading firmware amdgpu/polaris12_ce_2.bin
812[ 2.386462] [drm] Chained IB support enabled!
813[ 2.386474] amdgpu 0000:07:00.0: firmware: direct-loading firmware amdgpu/polaris12_rlc.bin
814[ 2.386536] amdgpu 0000:07:00.0: firmware: direct-loading firmware amdgpu/polaris12_mec_2.bin
815[ 2.386601] amdgpu 0000:07:00.0: firmware: direct-loading firmware amdgpu/polaris12_mec2_2.bin
816[ 2.387770] amdgpu 0000:07:00.0: firmware: direct-loading firmware amdgpu/polaris12_sdma.bin
817[ 2.387789] amdgpu 0000:07:00.0: firmware: direct-loading firmware amdgpu/polaris12_sdma1.bin
818[ 2.388028] amdgpu 0000:07:00.0: firmware: direct-loading firmware amdgpu/polaris12_uvd.bin
819[ 2.388030] [drm] Found UVD firmware Version: 1.130 Family ID: 16
820[ 2.388836] amdgpu 0000:07:00.0: firmware: direct-loading firmware amdgpu/polaris12_vce.bin
821[ 2.388838] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
822[ 2.389256] amdgpu 0000:07:00.0: firmware: direct-loading firmware amdgpu/polaris12_smc.bin
823[ 2.472115] amdgpu: [powerplay] Failed to retrieve minimum clocks.
824[ 2.472115] amdgpu: [powerplay] Error in phm_get_clock_info
825[ 2.472158] [drm] DM_PPLIB: values for Engine clock
826[ 2.472159] [drm] DM_PPLIB: 214000
827[ 2.472159] [drm] DM_PPLIB: 551000
828[ 2.472159] [drm] DM_PPLIB: 734000
829[ 2.472160] [drm] DM_PPLIB: 980000
830[ 2.472160] [drm] DM_PPLIB: 1046000
831[ 2.472160] [drm] DM_PPLIB: 1098000
832[ 2.472161] [drm] DM_PPLIB: 1124000
833[ 2.472161] [drm] DM_PPLIB: 1183000
834[ 2.472162] [drm] DM_PPLIB: Validation clocks:
835[ 2.472162] [drm] DM_PPLIB: engine_max_clock: 118300
836[ 2.472162] [drm] DM_PPLIB: memory_max_clock: 150000
837[ 2.472163] [drm] DM_PPLIB: level : 8
838[ 2.472164] [drm] DM_PPLIB: values for Memory clock
839[ 2.472164] [drm] DM_PPLIB: 300000
840[ 2.472164] [drm] DM_PPLIB: 625000
841[ 2.472165] [drm] DM_PPLIB: 1500000
842[ 2.472165] [drm] DM_PPLIB: Validation clocks:
843[ 2.472165] [drm] DM_PPLIB: engine_max_clock: 118300
844[ 2.472165] [drm] DM_PPLIB: memory_max_clock: 150000
845[ 2.472166] [drm] DM_PPLIB: level : 8
846[ 2.487636] [drm] Display Core initialized with v3.1.59!
847[ 2.550900] ata9: SATA link down (SStatus 0 SControl 300)
848[ 2.550920] ata10: SATA link down (SStatus 0 SControl 300)
849[ 2.556984] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
850[ 2.556984] [drm] Driver supports precise vblank timestamp query.
851[ 2.585681] [drm] UVD and UVD ENC initialized successfully.
852[ 2.623464] usb 3-1: new high-speed USB device number 2 using xhci_hcd
853[ 2.623471] usb 1-2: new low-speed USB device number 2 using xhci_hcd
854[ 2.685625] [drm] VCE initialized successfully.
855[ 2.687621] [drm] fb mappable at 0xE0D11000
856[ 2.687621] [drm] vram apper at 0xE0000000
857[ 2.687622] [drm] size 8294400
858[ 2.687622] [drm] fb depth is 24
859[ 2.687623] [drm] pitch is 7680
860[ 2.687779] fbcon: amdgpudrmfb (fb0) is primary device
861[ 2.707480] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
862[ 2.707786] ata1.00: ATA-9: SanDisk SSD PLUS 240GB, UF4500RL, max UDMA/133
863[ 2.707790] ata1.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 32)
864[ 2.713447] ata1.00: configured for UDMA/133
865[ 2.713573] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5
866[ 2.746696] Console: switching to colour frame buffer device 240x67
867[ 2.766131] amdgpu 0000:07:00.0: fb0: amdgpudrmfb frame buffer device
868[ 2.780738] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:07:00.0 on minor 0
869[ 2.807464] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b29d223047, max_idle_ns: 440795210090 ns
870[ 2.807524] clocksource: Switched to clocksource tsc
871[ 2.877262] usb 1-2: New USB device found, idVendor=1d57, idProduct=ffa4, bcdDevice= 1.10
872[ 2.877264] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
873[ 2.877265] usb 1-2: Product: 2.4G Receiver
874[ 2.888272] hidraw: raw HID events driver (C) Jiri Kosina
875[ 2.924032] usbcore: registered new interface driver usbhid
876[ 2.924033] usbhid: USB HID core driver
877[ 2.925710] input: 2.4G Receiver Mouse as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-2/1-2:1.0/0003:1D57:FFA4.0001/input/input2
878[ 2.925768] input: 2.4G Receiver System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-2/1-2:1.0/0003:1D57:FFA4.0001/input/input3
879[ 2.983513] input: 2.4G Receiver Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-2/1-2:1.0/0003:1D57:FFA4.0001/input/input4
880[ 2.983870] hid-generic 0003:1D57:FFA4.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [2.4G Receiver] on usb-0000:01:00.0-2/input0
881[ 2.984010] input: 2.4G Receiver as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-2/1-2:1.1/0003:1D57:FFA4.0002/input/input6
882[ 3.011471] usb 1-6: new full-speed USB device number 3 using xhci_hcd
883[ 3.043656] hid-generic 0003:1D57:FFA4.0002: input,hidraw1: USB HID v1.10 Keyboard [2.4G Receiver] on usb-0000:01:00.0-2/input1
884[ 3.187479] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
885[ 3.197327] ata2.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
886[ 3.197329] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
887[ 3.207351] ata2.00: configured for UDMA/133
888[ 3.207481] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HM500JI 01C4 PQ: 0 ANSI: 5
889[ 3.334155] usb 1-6: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
890[ 3.334156] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
891[ 3.683477] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
892[ 3.689634] ata5.00: ATA-8: ST500LM012 HN-M500MBB, 2AR10001, max UDMA/133
893[ 3.689636] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
894[ 3.695690] ata5.00: configured for UDMA/133
895[ 3.695793] scsi 4:0:0:0: Direct-Access ATA ST500LM012 HN-M5 0001 PQ: 0 ANSI: 5
896[ 4.171586] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
897[ 4.172154] ata6.00: ATA-9: WDC WD5000LPCX-24C6HT0, 01.01A01, max UDMA/133
898[ 4.172155] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
899[ 4.172713] ata6.00: configured for UDMA/133
900[ 4.172839] scsi 5:0:0:0: Direct-Access ATA WDC WD5000LPCX-2 1A01 PQ: 0 ANSI: 5
901[ 4.178371] sd 0:0:0:0: [sda] 468877312 512-byte logical blocks: (240 GB/224 GiB)
902[ 4.178376] sd 0:0:0:0: [sda] Write Protect is off
903[ 4.178377] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
904[ 4.178381] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
905[ 4.178403] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
906[ 4.178408] sd 1:0:0:0: [sdb] Write Protect is off
907[ 4.178409] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
908[ 4.178417] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
909[ 4.178431] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
910[ 4.178433] sd 4:0:0:0: [sdc] 4096-byte physical blocks
911[ 4.178438] sd 4:0:0:0: [sdc] Write Protect is off
912[ 4.178440] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
913[ 4.178446] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
914[ 4.178477] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
915[ 4.178479] sd 5:0:0:0: [sdd] 4096-byte physical blocks
916[ 4.178482] sd 5:0:0:0: [sdd] Write Protect is off
917[ 4.178483] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
918[ 4.178488] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
919[ 4.181466] sda: sda1 sda2 sda3
920[ 4.181770] sd 0:0:0:0: [sda] Attached SCSI disk
921[ 4.181970] usb 3-1: New USB device found, idVendor=14cd, idProduct=6116, bcdDevice= 2.20
922[ 4.181972] usb 3-1: New USB device strings: Mfr=1, Product=3, SerialNumber=2
923[ 4.181973] usb 3-1: Product: USB Mass Storage Device
924[ 4.181974] usb 3-1: Manufacturer: Generic
925[ 4.181974] usb 3-1: SerialNumber: 116AC2101219
926[ 4.185858] usb-storage 3-1:1.0: USB Mass Storage device detected
927[ 4.185994] scsi host10: usb-storage 3-1:1.0
928[ 4.186057] usbcore: registered new interface driver usb-storage
929[ 4.187531] usbcore: registered new interface driver uas
930[ 4.307640] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
931[ 4.331214] usb 4-2: New USB device found, idVendor=4971, idProduct=1015, bcdDevice= 0.00
932[ 4.331216] usb 4-2: New USB device strings: Mfr=10, Product=11, SerialNumber=3
933[ 4.331217] usb 4-2: Product: Touro Desk 3.0
934[ 4.331218] usb 4-2: Manufacturer: HitachiGST
935[ 4.331219] usb 4-2: SerialNumber: 31001206210000003234
936[ 4.331622] usb-storage 4-2:1.0: USB Mass Storage device detected
937[ 4.331820] scsi host11: usb-storage 4-2:1.0
938[ 4.534672] sdc: sdc1 sdc2 sdc3 sdc4
939[ 4.535198] sd 4:0:0:0: [sdc] Attached SCSI disk
940[ 4.579553] sdd: sdd1
941[ 4.579907] sd 5:0:0:0: [sdd] Attached SCSI disk
942[ 4.618867] sdb: sdb1
943[ 4.619246] sd 1:0:0:0: [sdb] Attached SCSI disk
944[ 5.208278] scsi 10:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0
945[ 5.208682] sd 10:0:0:0: [sde] 625142446 512-byte logical blocks: (320 GB/298 GiB)
946[ 5.208806] sd 10:0:0:0: [sde] Write Protect is off
947[ 5.208807] sd 10:0:0:0: [sde] Mode Sense: 03 00 00 00
948[ 5.208931] sd 10:0:0:0: [sde] No Caching mode page found
949[ 5.208960] sd 10:0:0:0: [sde] Assuming drive cache: write through
950[ 5.209854] sde: sde1
951[ 5.210624] sd 10:0:0:0: [sde] Attached SCSI disk
952[ 5.336062] scsi 11:0:0:0: Direct-Access HitachiG ST 0000 PQ: 0 ANSI: 6
953[ 5.336441] sd 11:0:0:0: [sdf] 488378623 4096-byte logical blocks: (2.00 TB/1.82 TiB)
954[ 5.336737] sd 11:0:0:0: [sdf] Write Protect is off
955[ 5.336738] sd 11:0:0:0: [sdf] Mode Sense: 27 00 00 00
956[ 5.336985] sd 11:0:0:0: [sdf] No Caching mode page found
957[ 5.337016] sd 11:0:0:0: [sdf] Assuming drive cache: write through
958[ 5.355984] sd 11:0:0:0: [sdf] Attached SCSI disk
959[ 5.467445] raid6: sse2x1 gen() 6968 MB/s
960[ 5.535440] raid6: sse2x1 xor() 9092 MB/s
961[ 5.603439] raid6: sse2x2 gen() 16263 MB/s
962[ 5.671441] raid6: sse2x2 xor() 12174 MB/s
963[ 5.739438] raid6: sse2x4 gen() 19685 MB/s
964[ 5.807443] raid6: sse2x4 xor() 11066 MB/s
965[ 5.875442] raid6: avx2x1 gen() 15614 MB/s
966[ 5.943440] raid6: avx2x1 xor() 12446 MB/s
967[ 6.011439] raid6: avx2x2 gen() 21458 MB/s
968[ 6.079441] raid6: avx2x2 xor() 13301 MB/s
969[ 6.147439] raid6: avx2x4 gen() 21983 MB/s
970[ 6.215439] raid6: avx2x4 xor() 12290 MB/s
971[ 6.215439] raid6: using algorithm avx2x4 gen() 21983 MB/s
972[ 6.215440] raid6: .... xor() 12290 MB/s, rmw enabled
973[ 6.215440] raid6: using avx2x2 recovery algorithm
974[ 6.216308] xor: automatically using best checksumming function avx
975[ 6.216983] async_tx: api initialized (async)
976[ 6.881843] device-mapper: uevent: version 1.0.3
977[ 6.881916] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
978[ 57.668033] NET: Registered protocol family 38
979[ 60.019518] Btrfs loaded, crc32c=crc32c-intel
980[ 60.250156] PM: Image not found (code -22)
981[ 60.386226] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
982[ 60.770269] systemd[1]: Inserted module 'autofs4'
983[ 60.867118] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
984[ 60.867201] systemd[1]: Detected architecture x86-64.
985[ 60.876621] systemd[1]: Set hostname to <server>.
986[ 60.877257] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
987[ 61.381833] systemd[1]: Listening on udev Control Socket.
988[ 61.381955] systemd[1]: Listening on Syslog Socket.
989[ 61.382027] systemd[1]: Listening on udev Kernel Socket.
990[ 61.382217] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
991[ 61.385670] systemd[1]: Created slice system-postgresql.slice.
992[ 61.385850] systemd[1]: Created slice system-serial\x2dgetty.slice.
993[ 61.454606] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
994[ 61.461057] lp: driver loaded but no devices found
995[ 61.465899] ppdev: user-space parallel port driver
996[ 61.468504] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA
997[ 61.468647] parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA
998[ 61.468783] parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA
999[ 61.736938] tpm_crb MSFT0101:00: can't request region for resource [mem 0xdc28e000-0xdc28efff]
1000[ 61.736990] tpm_crb: probe of MSFT0101:00 failed with error -16
1001[ 61.751771] ccp 0000:08:00.2: enabling device (0000 -> 0002)
1002[ 61.751835] xen: registering gsi 36 triggering 0 polarity 1
1003[ 61.751868] xen: --> pirq=36 -> irq=36 (gsi=36)
1004[ 61.752906] ccp 0000:08:00.2: ccp enabled
1005[ 61.753001] ccp 0000:08:00.2: psp enabled
1006[ 61.753002] ccp 0000:08:00.2: enabled
1007[ 61.792040] input: PC Speaker as /devices/platform/pcspkr/input/input7
1008[ 61.792965] EFI Variables Facility v0.08 2004-May-17
1009[ 61.809400] Decoding supported only on Scalable MCA processors.
1010[ 61.809402] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
1011[ 61.809905] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
1012[ 61.810633] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
1013[ 61.814863] sd 0:0:0:0: Attached scsi generic sg0 type 0
1014[ 61.814916] sd 1:0:0:0: Attached scsi generic sg1 type 0
1015[ 61.814978] sd 4:0:0:0: Attached scsi generic sg2 type 0
1016[ 61.815039] sd 5:0:0:0: Attached scsi generic sg3 type 0
1017[ 61.816013] sd 10:0:0:0: Attached scsi generic sg4 type 0
1018[ 61.816273] sd 11:0:0:0: Attached scsi generic sg5 type 0
1019[ 61.827251] pstore: Using compression: deflate
1020[ 61.835892] pstore: Registered efi as persistent store backend
1021[ 61.948484] Decoding supported only on Scalable MCA processors.
1022[ 61.951047] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
1023[ 62.120343] Decoding supported only on Scalable MCA processors.
1024[ 62.124495] Intel(R) Wireless WiFi driver for Linux
1025[ 62.124496] Copyright(c) 2003- 2015 Intel Corporation
1026[ 62.124582] iwlwifi 0000:05:00.0: enabling device (0000 -> 0002)
1027[ 62.124659] xen: registering gsi 34 triggering 0 polarity 1
1028[ 62.124671] Already setup the GSI :34
1029[ 62.129208] snd_hda_intel 0000:07:00.1: enabling device (0000 -> 0002)
1030[ 62.129294] xen: registering gsi 55 triggering 0 polarity 1
1031[ 62.129337] xen: --> pirq=55 -> irq=55 (gsi=55)
1032[ 62.129362] snd_hda_intel 0000:07:00.1: Handle vga_switcheroo audio client
1033[ 62.129364] snd_hda_intel 0000:07:00.1: Force to non-snoop mode
1034[ 62.129611] Adding 16728060k swap on /dev/mapper/server--vg-swap_1. Priority:-2 extents:1 across:16728060k SSFS
1035[ 62.130021] Bluetooth: Core ver 2.22
1036[ 62.130046] NET: Registered protocol family 31
1037[ 62.130047] Bluetooth: HCI device and connection manager initialized
1038[ 62.130051] Bluetooth: HCI socket layer initialized
1039[ 62.130054] Bluetooth: L2CAP socket layer initialized
1040[ 62.130061] Bluetooth: SCO socket layer initialized
1041[ 62.130833] snd_hda_intel 0000:09:00.3: enabling device (0000 -> 0002)
1042[ 62.130912] xen: registering gsi 43 triggering 0 polarity 1
1043[ 62.130946] xen: --> pirq=43 -> irq=43 (gsi=43)
1044[ 62.134622] iwlwifi 0000:05:00.0: firmware: direct-loading firmware iwlwifi-7260-17.ucode
1045[ 62.136600] iwlwifi 0000:05:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm
1046[ 62.146719] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input8
1047[ 62.146782] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input9
1048[ 62.146824] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input10
1049[ 62.146871] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input11
1050[ 62.146913] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input12
1051[ 62.152087] usbcore: registered new interface driver btusb
1052[ 62.169650] Bluetooth: hci0: read Intel version: 3707100180012d0d00
1053[ 62.175687] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq
1054[ 62.175690] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq
1055[ 62.201188] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
1056[ 62.211378] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
1057[ 62.218529] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
1058[ 62.223963] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
1059[ 62.224013] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
1060[ 62.237110] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
1061[ 62.244279] Decoding supported only on Scalable MCA processors.
1062[ 62.246344] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
1063[ 62.246346] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
1064[ 62.246348] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
1065[ 62.246349] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
1066[ 62.246350] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
1067[ 62.246351] snd_hda_codec_realtek hdaudioC1D0: inputs:
1068[ 62.246353] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
1069[ 62.246354] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
1070[ 62.246355] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
1071[ 62.254377] systemd-journald[600]: Received request to flush runtime journal from PID 1
1072[ 62.261621] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input13
1073[ 62.261705] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input14
1074[ 62.262938] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input15
1075[ 62.263535] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input16
1076[ 62.263605] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input17
1077[ 62.372141] Decoding supported only on Scalable MCA processors.
1078[ 62.375849] iwlwifi 0000:05:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
1079[ 62.394473] iwlwifi 0000:05:00.0: base HW address: a4:c4:94:83:05:c2
1080[ 62.484187] Decoding supported only on Scalable MCA processors.
1081[ 62.580150] Decoding supported only on Scalable MCA processors.
1082[ 62.586238] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
1083[ 62.601722] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
1084[ 62.613407] iwlwifi 0000:05:00.0 wlp5s0: renamed from wlan0
1085[ 62.676640] Decoding supported only on Scalable MCA processors.
1086[ 62.709525] audit: type=1400 audit(1570899255.258:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=947 comm="apparmor_parser"
1087[ 62.710086] audit: type=1400 audit(1570899255.258:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=944 comm="apparmor_parser"
1088[ 62.710229] audit: type=1400 audit(1570899255.258:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=949 comm="apparmor_parser"
1089[ 62.711506] audit: type=1400 audit(1570899255.262:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=951 comm="apparmor_parser"
1090[ 62.711510] audit: type=1400 audit(1570899255.262:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=951 comm="apparmor_parser"
1091[ 62.712527] audit: type=1400 audit(1570899255.262:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=948 comm="apparmor_parser"
1092[ 62.712658] audit: type=1400 audit(1570899255.262:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=946 comm="apparmor_parser"
1093[ 62.712660] audit: type=1400 audit(1570899255.262:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=946 comm="apparmor_parser"
1094[ 62.712661] audit: type=1400 audit(1570899255.262:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=946 comm="apparmor_parser"
1095[ 62.714929] audit: type=1400 audit(1570899255.262:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=954 comm="apparmor_parser"
1096[ 62.812685] Decoding supported only on Scalable MCA processors.
1097[ 62.912199] Decoding supported only on Scalable MCA processors.
1098[ 62.917656] Bluetooth: hci0: unexpected event for opcode 0xfc2f
1099[ 62.944670] Bluetooth: hci0: Intel firmware patch completed and activated
1100[ 63.044271] Decoding supported only on Scalable MCA processors.
1101[ 63.160506] Decoding supported only on Scalable MCA processors.
1102[ 63.191871] xen:xen_evtchn: Event-channel device installed
1103[ 63.284515] Decoding supported only on Scalable MCA processors.
1104[ 63.408566] Decoding supported only on Scalable MCA processors.
1105[ 63.536544] Decoding supported only on Scalable MCA processors.
1106[ 63.536552] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
1107[ 63.536553] Bluetooth: BNEP filters: protocol multicast
1108[ 63.536559] Bluetooth: BNEP socket layer initialized
1109[ 63.652364] Decoding supported only on Scalable MCA processors.
1110[ 63.771089] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1111[ 66.807471] ccp 0000:08:00.2: sev command 0x4 timed out, disabling PSP
1112[ 66.808224] ccp 0000:08:00.2: SEV: failed to get status. Error: 0x0
1113[ 66.900490] r8169 0000:06:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
1114[ 66.900728] Generic PHY r8169-600:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-600:00, irq=IGNORE)
1115[ 67.033821] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
1116[ 67.087147] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
1117[ 67.091808] xenbr0: port 1(enp6s0) entered blocking state
1118[ 67.091809] xenbr0: port 1(enp6s0) entered disabled state
1119[ 67.091902] device enp6s0 entered promiscuous mode
1120[ 67.097063] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
1121[ 69.139940] r8169 0000:06:00.0 enp6s0: Link is Up - 100Mbps/Full - flow control rx/tx
1122[ 69.139951] xenbr0: port 1(enp6s0) entered blocking state
1123[ 69.139952] xenbr0: port 1(enp6s0) entered forwarding state
1124[ 69.140006] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
1125[ 161.124632] Bluetooth: RFCOMM TTY layer initialized
1126[ 161.124637] Bluetooth: RFCOMM socket layer initialized
1127[ 161.124643] Bluetooth: RFCOMM ver 1.11
1128[ 3765.144741] tun: Universal TUN/TAP device driver, 1.6
1129[ 3765.239919] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
1130[ 3765.240059] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
1131[ 3765.284713] xenbr0: port 2(vif1.0) entered blocking state
1132[ 3765.284715] xenbr0: port 2(vif1.0) entered disabled state
1133[ 3765.284780] device vif1.0 entered promiscuous mode
1134[ 3765.287304] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
1135[ 3765.356291] xenbr0: port 3(vif1.0-emu) entered blocking state
1136[ 3765.356292] xenbr0: port 3(vif1.0-emu) entered disabled state
1137[ 3765.356356] device vif1.0-emu entered promiscuous mode
1138[ 3765.358872] xenbr0: port 3(vif1.0-emu) entered blocking state
1139[ 3765.358873] xenbr0: port 3(vif1.0-emu) entered forwarding state
1140[ 4313.430976] xenbr0: port 3(vif1.0-emu) entered disabled state
1141[ 4313.431946] device vif1.0-emu left promiscuous mode
1142[ 4313.431948] xenbr0: port 3(vif1.0-emu) entered disabled state
1143[ 4313.467893] xenbr0: port 2(vif1.0) entered disabled state
1144[ 4313.468070] device vif1.0 left promiscuous mode
1145[ 4313.468073] xenbr0: port 2(vif1.0) entered disabled state
1146[ 4315.976662] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1147[ 4315.997189] IPv6: ADDRCONF(NETDEV_UP): vif2.0: link is not ready
1148[ 4315.997282] IPv6: ADDRCONF(NETDEV_UP): vif2.0: link is not ready
1149[ 4316.023176] xenbr0: port 2(vif2.0) entered blocking state
1150[ 4316.023178] xenbr0: port 2(vif2.0) entered disabled state
1151[ 4316.023249] device vif2.0 entered promiscuous mode
1152[ 4316.026094] IPv6: ADDRCONF(NETDEV_UP): vif2.0: link is not ready
1153[ 4316.093438] xenbr0: port 3(vif2.0-emu) entered blocking state
1154[ 4316.093440] xenbr0: port 3(vif2.0-emu) entered disabled state
1155[ 4316.093504] device vif2.0-emu entered promiscuous mode
1156[ 4316.095943] xenbr0: port 3(vif2.0-emu) entered blocking state
1157[ 4316.095944] xenbr0: port 3(vif2.0-emu) entered forwarding state
1158[ 6039.020379] swiotlb_tbl_map_single: 8 callbacks suppressed
1159[ 6039.020382] amdgpu 0000:07:00.0: swiotlb buffer is full (sz: 2097152 bytes)
1160[ 6540.903246] xenbr0: port 2(vif2.0) entered disabled state
1161[ 6540.903513] device vif2.0 left promiscuous mode
1162[ 6540.903514] xenbr0: port 2(vif2.0) entered disabled state
1163[ 6540.941422] xenbr0: port 3(vif2.0-emu) entered disabled state
1164[ 6540.941627] device vif2.0-emu left promiscuous mode
1165[ 6540.941629] xenbr0: port 3(vif2.0-emu) entered disabled state
1166[ 6543.775740] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1167[ 6566.182927] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1168[ 6566.837671] IPv6: ADDRCONF(NETDEV_UP): vif3.0: link is not ready
1169[ 6566.837797] IPv6: ADDRCONF(NETDEV_UP): vif3.0: link is not ready
1170[ 6566.885188] xenbr0: port 2(vif3.0) entered blocking state
1171[ 6566.885190] xenbr0: port 2(vif3.0) entered disabled state
1172[ 6566.885256] device vif3.0 entered promiscuous mode
1173[ 6566.887833] IPv6: ADDRCONF(NETDEV_UP): vif3.0: link is not ready
1174[ 6566.962214] xenbr0: port 3(vif3.0-emu) entered blocking state
1175[ 6566.962216] xenbr0: port 3(vif3.0-emu) entered disabled state
1176[ 6566.962280] device vif3.0-emu entered promiscuous mode
1177[ 6566.964748] xenbr0: port 3(vif3.0-emu) entered blocking state
1178[ 6566.964750] xenbr0: port 3(vif3.0-emu) entered forwarding state
1179[ 6607.532873] xenbr0: port 3(vif3.0-emu) entered disabled state
1180[ 6607.533724] device vif3.0-emu left promiscuous mode
1181[ 6607.533726] xenbr0: port 3(vif3.0-emu) entered disabled state
1182[ 6607.603707] xenbr0: port 2(vif3.0) entered disabled state
1183[ 6607.603927] device vif3.0 left promiscuous mode
1184[ 6607.603928] xenbr0: port 2(vif3.0) entered disabled state
1185[ 6610.425082] xenbr0: port 2(vif4.0) entered blocking state
1186[ 6610.425083] xenbr0: port 2(vif4.0) entered disabled state
1187[ 6610.425146] device vif4.0 entered promiscuous mode
1188[ 6610.427803] IPv6: ADDRCONF(NETDEV_UP): vif4.0: link is not ready
1189[ 6610.498892] xenbr0: port 3(vif4.0-emu) entered blocking state
1190[ 6610.498894] xenbr0: port 3(vif4.0-emu) entered disabled state
1191[ 6610.498972] device vif4.0-emu entered promiscuous mode
1192[ 6610.501954] xenbr0: port 3(vif4.0-emu) entered blocking state
1193[ 6610.501955] xenbr0: port 3(vif4.0-emu) entered forwarding state
1194[ 6610.587744] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1195[ 6610.604861] IPv6: ADDRCONF(NETDEV_UP): vif4.0: link is not ready
1196[ 6651.820297] xenbr0: port 3(vif4.0-emu) entered disabled state
1197[ 6651.821201] device vif4.0-emu left promiscuous mode
1198[ 6651.821203] xenbr0: port 3(vif4.0-emu) entered disabled state
1199[ 6651.850434] xenbr0: port 2(vif4.0) entered disabled state
1200[ 6651.850647] device vif4.0 left promiscuous mode
1201[ 6651.850648] xenbr0: port 2(vif4.0) entered disabled state
1202[ 6654.553800] xenbr0: port 2(vif5.0) entered blocking state
1203[ 6654.553802] xenbr0: port 2(vif5.0) entered disabled state
1204[ 6654.553860] device vif5.0 entered promiscuous mode
1205[ 6654.556363] IPv6: ADDRCONF(NETDEV_UP): vif5.0: link is not ready
1206[ 6654.624691] xenbr0: port 3(vif5.0-emu) entered blocking state
1207[ 6654.624692] xenbr0: port 3(vif5.0-emu) entered disabled state
1208[ 6654.624752] device vif5.0-emu entered promiscuous mode
1209[ 6654.627166] xenbr0: port 3(vif5.0-emu) entered blocking state
1210[ 6654.627168] xenbr0: port 3(vif5.0-emu) entered forwarding state
1211[ 6655.074519] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1212[ 6655.091353] IPv6: ADDRCONF(NETDEV_UP): vif5.0: link is not ready
1213[ 6686.341093] xenbr0: port 3(vif5.0-emu) entered disabled state
1214[ 6686.341302] device vif5.0-emu left promiscuous mode
1215[ 6686.341304] xenbr0: port 3(vif5.0-emu) entered disabled state
1216[ 6686.373026] xenbr0: port 2(vif5.0) entered disabled state
1217[ 6686.373329] device vif5.0 left promiscuous mode
1218[ 6686.373330] xenbr0: port 2(vif5.0) entered disabled state
1219[ 6689.071117] xenbr0: port 2(vif6.0) entered blocking state
1220[ 6689.071119] xenbr0: port 2(vif6.0) entered disabled state
1221[ 6689.071179] device vif6.0 entered promiscuous mode
1222[ 6689.073802] IPv6: ADDRCONF(NETDEV_UP): vif6.0: link is not ready
1223[ 6689.149185] xenbr0: port 3(vif6.0-emu) entered blocking state
1224[ 6689.149192] xenbr0: port 3(vif6.0-emu) entered disabled state
1225[ 6689.149260] device vif6.0-emu entered promiscuous mode
1226[ 6689.152251] xenbr0: port 3(vif6.0-emu) entered blocking state
1227[ 6689.152253] xenbr0: port 3(vif6.0-emu) entered forwarding state
1228[ 6689.176977] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1229[ 6689.195177] IPv6: ADDRCONF(NETDEV_UP): vif6.0: link is not ready
1230[ 6710.607307] xenbr0: port 3(vif6.0-emu) entered disabled state
1231[ 6710.607550] device vif6.0-emu left promiscuous mode
1232[ 6710.607552] xenbr0: port 3(vif6.0-emu) entered disabled state
1233[ 6710.660349] xenbr0: port 2(vif6.0) entered disabled state
1234[ 6710.660605] device vif6.0 left promiscuous mode
1235[ 6710.660606] xenbr0: port 2(vif6.0) entered disabled state
1236[ 6712.977471] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1237[ 6713.297307] IPv6: ADDRCONF(NETDEV_UP): vif7.0: link is not ready
1238[ 6713.297417] IPv6: ADDRCONF(NETDEV_UP): vif7.0: link is not ready
1239[ 6713.345869] xenbr0: port 2(vif7.0) entered blocking state
1240[ 6713.345870] xenbr0: port 2(vif7.0) entered disabled state
1241[ 6713.345935] device vif7.0 entered promiscuous mode
1242[ 6713.348422] IPv6: ADDRCONF(NETDEV_UP): vif7.0: link is not ready
1243[ 6713.414710] xenbr0: port 3(vif7.0-emu) entered blocking state
1244[ 6713.414711] xenbr0: port 3(vif7.0-emu) entered disabled state
1245[ 6713.414771] device vif7.0-emu entered promiscuous mode
1246[ 6713.417349] xenbr0: port 3(vif7.0-emu) entered blocking state
1247[ 6713.417350] xenbr0: port 3(vif7.0-emu) entered forwarding state
1248[ 6800.592362] amdgpu 0000:07:00.0: swiotlb buffer is full (sz: 2097152 bytes)
1249[ 6800.597457] amdgpu 0000:07:00.0: swiotlb buffer is full (sz: 2097152 bytes)
1250[ 6800.605817] amdgpu 0000:07:00.0: swiotlb buffer is full (sz: 2097152 bytes)
1251[ 6800.605973] amdgpu 0000:07:00.0: swiotlb buffer is full (sz: 2097152 bytes)
1252[ 7554.890280] xenbr0: port 3(vif7.0-emu) entered disabled state
1253[ 7554.890454] device vif7.0-emu left promiscuous mode
1254[ 7554.890457] xenbr0: port 3(vif7.0-emu) entered disabled state
1255[ 7554.930785] xenbr0: port 2(vif7.0) entered disabled state
1256[ 7554.931013] device vif7.0 left promiscuous mode
1257[ 7554.931018] xenbr0: port 2(vif7.0) entered disabled state
1258[ 7558.050148] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1259[ 7638.282259] audit: type=1400 audit(1570906830.842:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=14894 comm="apparmor_parser"
1260[ 7638.366307] audit: type=1400 audit(1570906830.926:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd" pid=14900 comm="apparmor_parser"
1261[ 7638.366421] audit: type=1400 audit(1570906830.926:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd//qemu_bridge_helper" pid=14900 comm="apparmor_parser"
1262[ 7648.081053] virbr0: port 1(virbr0-nic) entered blocking state
1263[ 7648.081054] virbr0: port 1(virbr0-nic) entered disabled state
1264[ 7648.081091] device virbr0-nic entered promiscuous mode
1265[ 7648.491423] virbr0: port 1(virbr0-nic) entered blocking state
1266[ 7648.491425] virbr0: port 1(virbr0-nic) entered listening state
1267[ 7648.588947] virbr0: port 1(virbr0-nic) entered disabled state
1268[ 7680.649451] xenbr0: port 2(vif8.0) entered blocking state
1269[ 7680.649453] xenbr0: port 2(vif8.0) entered disabled state
1270[ 7680.649536] device vif8.0 entered promiscuous mode
1271[ 7680.652091] IPv6: ADDRCONF(NETDEV_UP): vif8.0: link is not ready
1272[ 7680.720555] xenbr0: port 3(vif8.0-emu) entered blocking state
1273[ 7680.720557] xenbr0: port 3(vif8.0-emu) entered disabled state
1274[ 7680.720618] device vif8.0-emu entered promiscuous mode
1275[ 7680.723302] xenbr0: port 3(vif8.0-emu) entered blocking state
1276[ 7680.723303] xenbr0: port 3(vif8.0-emu) entered forwarding state
1277[ 7681.084184] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1278[ 7681.120018] IPv6: ADDRCONF(NETDEV_UP): vif8.0: link is not ready
1279[ 8025.445197] xenbr0: port 3(vif8.0-emu) entered disabled state
1280[ 8025.446453] device vif8.0-emu left promiscuous mode
1281[ 8025.446455] xenbr0: port 3(vif8.0-emu) entered disabled state
1282[ 8025.482234] xenbr0: port 2(vif8.0) entered disabled state
1283[ 8025.483710] device vif8.0 left promiscuous mode
1284[ 8025.483712] xenbr0: port 2(vif8.0) entered disabled state
1285[ 8074.287080] audit: type=1400 audit(1570907266.866:23): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=16842 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1286[ 8074.300774] audit: type=1400 audit(1570907266.882:24): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=16843 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1287[ 8074.315129] audit: type=1400 audit(1570907266.894:25): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=16844 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1288[ 8074.327450] audit: type=1400 audit(1570907266.910:26): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=16845 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1289[ 8098.067204] audit: type=1400 audit(1570907290.647:27): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=17023 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1290[ 8098.079157] audit: type=1400 audit(1570907290.659:28): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=17024 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1291[ 8098.091635] audit: type=1400 audit(1570907290.671:29): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=17025 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1292[ 8098.103806] audit: type=1400 audit(1570907290.683:30): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=17026 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1293[ 8119.443281] audit: type=1400 audit(1570907312.023:31): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=17100 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1294[ 8119.456115] audit: type=1400 audit(1570907312.035:32): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=17101 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1295[ 8119.471235] audit: type=1400 audit(1570907312.051:33): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=17102 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1296[ 8119.484329] audit: type=1400 audit(1570907312.063:34): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=17103 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1297[ 8126.157655] audit: type=1400 audit(1570907318.740:35): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=17182 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1298[ 8126.170142] audit: type=1400 audit(1570907318.752:36): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=17183 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1299[ 8126.182246] audit: type=1400 audit(1570907318.764:37): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=17184 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1300[ 8126.193827] audit: type=1400 audit(1570907318.776:38): apparmor="DENIED" operation="exec" profile="/usr/sbin/libvirtd" name="/usr/lib/xen-4.11/bin/qemu-system-i386" pid=17185 comm="libvirtd" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
1301[ 8204.001912] virbr0: port 2(vif13.0) entered blocking state
1302[ 8204.001913] virbr0: port 2(vif13.0) entered disabled state
1303[ 8204.001975] device vif13.0 entered promiscuous mode
1304[ 8204.004552] IPv6: ADDRCONF(NETDEV_UP): vif13.0: link is not ready
1305[ 8204.079705] virbr0: port 3(vif13.0-emu) entered blocking state
1306[ 8204.079707] virbr0: port 3(vif13.0-emu) entered disabled state
1307[ 8204.079794] device vif13.0-emu entered promiscuous mode
1308[ 8204.083390] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1309[ 8204.083484] virbr0: port 3(vif13.0-emu) entered blocking state
1310[ 8204.083485] virbr0: port 3(vif13.0-emu) entered listening state
1311[ 8204.120633] IPv6: ADDRCONF(NETDEV_UP): vif13.0: link is not ready
1312[ 8206.106759] virbr0: port 3(vif13.0-emu) entered learning state
1313[ 8208.118610] virbr0: port 3(vif13.0-emu) entered forwarding state
1314[ 8208.118612] virbr0: topology change detected, propagating
1315[ 8359.984613] virbr0: port 3(vif13.0-emu) entered disabled state
1316[ 8359.986200] device vif13.0-emu left promiscuous mode
1317[ 8359.986201] virbr0: port 3(vif13.0-emu) entered disabled state
1318[ 8360.018787] virbr0: port 2(vif13.0) entered disabled state
1319[ 8360.020257] device vif13.0 left promiscuous mode
1320[ 8360.020261] virbr0: port 2(vif13.0) entered disabled state
1321[ 8362.656521] virbr0: port 2(vif14.0) entered blocking state
1322[ 8362.656522] virbr0: port 2(vif14.0) entered disabled state
1323[ 8362.656583] device vif14.0 entered promiscuous mode
1324[ 8362.659708] IPv6: ADDRCONF(NETDEV_UP): vif14.0: link is not ready
1325[ 8362.737395] virbr0: port 3(vif14.0-emu) entered blocking state
1326[ 8362.737396] virbr0: port 3(vif14.0-emu) entered disabled state
1327[ 8362.737459] device vif14.0-emu entered promiscuous mode
1328[ 8362.739951] virbr0: port 3(vif14.0-emu) entered blocking state
1329[ 8362.739952] virbr0: port 3(vif14.0-emu) entered listening state
1330[ 8362.827944] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1331[ 8362.861368] IPv6: ADDRCONF(NETDEV_UP): vif14.0: link is not ready
1332[ 8364.749733] virbr0: port 3(vif14.0-emu) entered learning state
1333[ 8366.765872] virbr0: port 3(vif14.0-emu) entered forwarding state
1334[ 8366.765888] virbr0: topology change detected, propagating
1335[ 8514.138552] virbr0: port 3(vif14.0-emu) entered disabled state
1336[ 8514.140163] device vif14.0-emu left promiscuous mode
1337[ 8514.140166] virbr0: port 3(vif14.0-emu) entered disabled state
1338[ 8514.177528] virbr0: port 2(vif14.0) entered disabled state
1339[ 8514.179110] device vif14.0 left promiscuous mode
1340[ 8514.179111] virbr0: port 2(vif14.0) entered disabled state
1341[ 8516.943102] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1342[ 8536.504581] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1343[ 8566.712428] IPv6: ADDRCONF(NETDEV_UP): vif15.0: link is not ready
1344[ 8566.712560] IPv6: ADDRCONF(NETDEV_UP): vif15.0: link is not ready
1345[ 8566.757642] virbr0: port 2(vif15.0) entered blocking state
1346[ 8566.757643] virbr0: port 2(vif15.0) entered disabled state
1347[ 8566.757710] device vif15.0 entered promiscuous mode
1348[ 8566.760193] IPv6: ADDRCONF(NETDEV_UP): vif15.0: link is not ready
1349[ 8566.839592] virbr0: port 3(vif15.0-emu) entered blocking state
1350[ 8566.839594] virbr0: port 3(vif15.0-emu) entered disabled state
1351[ 8566.839683] device vif15.0-emu entered promiscuous mode
1352[ 8566.842472] virbr0: port 3(vif15.0-emu) entered blocking state
1353[ 8566.842474] virbr0: port 3(vif15.0-emu) entered listening state
1354[ 8568.865571] virbr0: port 3(vif15.0-emu) entered learning state
1355[ 8570.881377] virbr0: port 3(vif15.0-emu) entered forwarding state
1356[ 8570.881389] virbr0: topology change detected, propagating
1357[ 8571.988339] virbr0: port 3(vif15.0-emu) entered disabled state
1358[ 8571.989651] device vif15.0-emu left promiscuous mode
1359[ 8571.989654] virbr0: port 3(vif15.0-emu) entered disabled state
1360[ 8572.030209] virbr0: port 2(vif15.0) entered disabled state
1361[ 8572.031765] device vif15.0 left promiscuous mode
1362[ 8572.031768] virbr0: port 2(vif15.0) entered disabled state
1363[ 8574.640727] virbr0: port 2(vif16.0) entered blocking state
1364[ 8574.640729] virbr0: port 2(vif16.0) entered disabled state
1365[ 8574.640789] device vif16.0 entered promiscuous mode
1366[ 8574.643628] IPv6: ADDRCONF(NETDEV_UP): vif16.0: link is not ready
1367[ 8574.717581] virbr0: port 3(vif16.0-emu) entered blocking state
1368[ 8574.717583] virbr0: port 3(vif16.0-emu) entered disabled state
1369[ 8574.717663] device vif16.0-emu entered promiscuous mode
1370[ 8574.720567] virbr0: port 3(vif16.0-emu) entered blocking state
1371[ 8574.720569] virbr0: port 3(vif16.0-emu) entered listening state
1372[ 8574.813599] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1373[ 8574.845903] IPv6: ADDRCONF(NETDEV_UP): vif16.0: link is not ready
1374[ 8576.736975] virbr0: port 3(vif16.0-emu) entered learning state
1375[ 8578.752861] virbr0: port 3(vif16.0-emu) entered forwarding state
1376[ 8578.752862] virbr0: topology change detected, propagating
1377[10147.654242] virbr0: port 3(vif16.0-emu) entered disabled state
1378[10147.655589] device vif16.0-emu left promiscuous mode
1379[10147.655591] virbr0: port 3(vif16.0-emu) entered disabled state
1380[10147.691825] virbr0: port 2(vif16.0) entered disabled state
1381[10147.693466] device vif16.0 left promiscuous mode
1382[10147.693469] virbr0: port 2(vif16.0) entered disabled state
1383[10150.269339] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1384[10150.306618] IPv6: ADDRCONF(NETDEV_UP): vif17.0: link is not ready
1385[10150.306714] IPv6: ADDRCONF(NETDEV_UP): vif17.0: link is not ready
1386[10150.324213] virbr0: port 2(vif17.0) entered blocking state
1387[10150.324214] virbr0: port 2(vif17.0) entered disabled state
1388[10150.324279] device vif17.0 entered promiscuous mode
1389[10150.409815] virbr0: port 3(vif17.0-emu) entered blocking state
1390[10150.409817] virbr0: port 3(vif17.0-emu) entered disabled state
1391[10150.409888] device vif17.0-emu entered promiscuous mode
1392[10150.412637] virbr0: port 3(vif17.0-emu) entered blocking state
1393[10150.412639] virbr0: port 3(vif17.0-emu) entered listening state
1394[10152.442356] virbr0: port 3(vif17.0-emu) entered learning state
1395[10154.458258] virbr0: port 3(vif17.0-emu) entered forwarding state
1396[10154.458270] virbr0: topology change detected, propagating
1397[10626.757151] virbr0: port 3(vif17.0-emu) entered disabled state
1398[10626.758558] device vif17.0-emu left promiscuous mode
1399[10626.758561] virbr0: port 3(vif17.0-emu) entered disabled state
1400[10626.803861] virbr0: port 2(vif17.0) entered disabled state
1401[10626.805438] device vif17.0 left promiscuous mode
1402[10626.805441] virbr0: port 2(vif17.0) entered disabled state
1403[10629.282770] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
1404[10629.332631] IPv6: ADDRCONF(NETDEV_UP): vif18.0: link is not ready
1405[10629.332775] IPv6: ADDRCONF(NETDEV_UP): vif18.0: link is not ready
1406[10629.379033] virbr0: port 2(vif18.0) entered blocking state
1407[10629.379035] virbr0: port 2(vif18.0) entered disabled state
1408[10629.379116] device vif18.0 entered promiscuous mode
1409[10629.382108] IPv6: ADDRCONF(NETDEV_UP): vif18.0: link is not ready
1410[10629.463995] virbr0: port 3(vif18.0-emu) entered blocking state
1411[10629.463996] virbr0: port 3(vif18.0-emu) entered disabled state
1412[10629.464062] device vif18.0-emu entered promiscuous mode
1413[10629.466786] virbr0: port 3(vif18.0-emu) entered blocking state
1414[10629.466788] virbr0: port 3(vif18.0-emu) entered listening state
1415[10631.494857] virbr0: port 3(vif18.0-emu) entered learning state
1416[10633.510753] virbr0: port 3(vif18.0-emu) entered forwarding state
1417[10633.510755] virbr0: topology change detected, propagating