· 6 years ago · Dec 11, 2019, 11:38 AM
1[ 0.000000] Booting Linux on physical CPU 0x0
2[ 0.000000] Linux version 4.14.134-rt63-tegra (ubuntu@smoky) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05)) #1 SMP PREEMPT RT Fri Nov 22 15:26:11 PST 2019
3[ 0.000000] Boot CPU: AArch64 Processor [4e0f0040]
4[ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16,
5[ 0.000000] OF: fdt: - 80000000 , 7e8700000
6[ 0.000000] Machine model: e3550_t194a
7[ 0.000000] Found vpr, start=0x870000000 size=8000000
8[ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '')
9[ 0.000000] bootconsole [tegra_comb_uart0] enabled
10[ 0.000000] efi: Getting EFI parameters from FDT:
11[ 0.000000] efi: UEFI not found.
12[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
13[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
14[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
15[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
16[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB
17[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB
18[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB
19[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB
20[ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
21[ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem
22[ 0.000000] cma: Reserved 68 MiB at 0x00000000fb800000
23[ 0.000000] On node 0 totalpages: 8291584
24[ 0.000000] DMA zone: 8192 pages used for memmap
25[ 0.000000] DMA zone: 0 pages reserved
26[ 0.000000] DMA zone: 523776 pages, LIFO batch:31
27[ 0.000000] Normal zone: 121372 pages used for memmap
28[ 0.000000] Normal zone: 7767808 pages, LIFO batch:31
29[ 0.000000] psci: probing for conduit method from DT.
30[ 0.000000] psci: PSCIv1.0 detected in firmware.
31[ 0.000000] psci: Using standard PSCI v0.2 function IDs
32[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
33[ 0.000000] psci: SMC Calling Convention v1.1
34[ 0.000000] random: get_random_bytes called from start_kernel+0xb0/0x424 with crng_init=0
35[ 0.000000] percpu: Embedded 23 pages/cpu s54976 r8192 d31040 u94208
36[ 0.000000] pcpu-alloc: s54976 r8192 d31040 u94208 alloc=23*4096
37[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
38[ 0.000000] Speculative Store Bypass Disable mitigation not required
39[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8162020
40[ 0.000000] Kernel command line: pci=ecrc=on fbcon=map:9 root=/dev/mmcblk0p1 rootwait ip=off rw rootfstype=ext4 sdhci_tegra.en_boot_part_access=1 disable_android_paranoid_network tegraid=19.1.2.0.0 vpr=0x8000000@0x0000000870000000 lp0_vec=0x0@0x00000000 uid=16420f0c81800000003000240 bl_debug_data=65536@0x86a030000 earlycon=tegra_comb_uart,mmio32,0xc168000 console=ttyTCU0,115200 bl_prof_dataptr=65536@0x86a010000
41[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
42[ 0.000000] Dentry cache hash table entries: 4194304 (order: 14, 67108864 bytes)
43[ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
44[ 0.000000] software IO TLB: mapped [mem 0xeb800000-0xfb800000] (256MB)
45[ 0.000000] Memory: 32189716K/33166336K available (14204K kernel code, 2782K rwdata, 5096K rodata, 7296K init, 570K bss, 906988K reserved, 69632K cma-reserved)
46[ 0.000000] Virtual kernel memory layout:
47[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
48[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
49[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008e60000 ( 14208 KB)
50[ 0.000000] .rodata : 0xffffff8008e60000 - 0xffffff8009360000 ( 5120 KB)
51[ 0.000000] .init : 0xffffff8009360000 - 0xffffff8009a80000 ( 7296 KB)
52[ 0.000000] .data : 0xffffff8009a80000 - 0xffffff8009d37a00 ( 2783 KB)
53[ 0.000000] .bss : 0xffffff8009d37a00 - 0xffffff8009dc62b0 ( 571 KB)
54[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
55[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
56[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
57[ 0.000000] 0xffffffbf00000000 - 0xffffffbf1fa1c000 ( 506 MB actual)
58[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc7e8700000 ( 32391 MB)
59[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
60[ 0.000000] ftrace: allocating 44123 entries in 173 pages
61[ 0.000000] Preemptible hierarchical RCU implementation.
62[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
63[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
64[ 0.000000] No expedited grace period (rcu_normal_after_boot).
65[ 0.000000] Tasks RCU enabled.
66[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
67[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
68[ 0.000000] GIC: Using split EOI/Deactivate mode
69[ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys).
70[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns
71[ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns
72[ 0.000427] Console: colour dummy device 80x25
73[ 0.343860] kmemleak: Kernel memory leak detector disabled
74[ 0.343909] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000)
75[ 0.343916] pid_max: default: 32768 minimum: 301
76[ 0.344569] Security Framework initialized
77[ 0.344969] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
78[ 0.345011] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
79[ 0.360590] ASID allocator initialised with 65536 entries
80[ 0.400660] Hierarchical SRCU implementation.
81[ 0.428246] tegra-id: chipid=21917.
82[ 0.428341] tegra-id: opt_subrevision=0.
83[ 0.428434] Tegra Revision: A02 SKU: 0x90 CPU Process: 0 SoC Process: 0
84[ 0.428573] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/automotive/kernel-dts/e3550/tegra194-e3550-0001-b03-A.dts
85[ 0.428865] DTB Build time: Nov 22 2019 15:18:05
86[ 0.429413] EFI services will not be available.
87[ 0.429958] NMI watchdog: NMI event is not supported
88[ 0.448901] smp: Bringing up secondary CPUs ...
89[ 0.493559] CPU1: Booted secondary processor [4e0f0040]
90[ 0.537812] CPU2: Booted secondary processor [4e0f0040]
91[ 0.582094] CPU3: Booted secondary processor [4e0f0040]
92[ 0.626419] CPU4: Booted secondary processor [4e0f0040]
93[ 0.670612] CPU5: Booted secondary processor [4e0f0040]
94[ 0.715025] CPU6: Booted secondary processor [4e0f0040]
95[ 0.759251] CPU7: Booted secondary processor [4e0f0040]
96[ 0.759838] smp: Brought up 1 node, 8 CPUs
97[ 0.760619] SMP: Total of 8 processors activated.
98[ 0.760705] CPU features: detected feature: Privileged Access Never
99[ 0.760804] CPU features: detected feature: LSE atomic instructions
100[ 0.760917] CPU features: detected feature: User Access Override
101[ 0.761017] CPU features: detected feature: 32-bit EL0 Support
102[ 0.930870] CPU: All CPU(s) started at EL2
103[ 0.931010] alternatives: patching kernel code
104[ 0.936764] CPU7: update max cpu_capacity 1024
105[ 0.938712] CPU1: update max cpu_capacity 1024
106[ 0.942078] devtmpfs: initialized
107[ 0.976664] Initilizing CustomIPI irq domain
108[ 0.976812] Registered cp15_barrier emulation handler
109[ 0.976933] Registered setend emulation handler
110[ 0.977356] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
111[ 0.977517] futex hash table entries: 2048 (order: 6, 262144 bytes)
112[ 0.979961] pinctrl core: initialized pinctrl subsystem
113[ 0.980516] regulator-dummy: no parameters
114[ 0.981371] NET: Registered protocol family 16
115[ 0.983641] pstore: using zlib compression
116[ 0.984815] console [pstore-1] enabled
117[ 0.984897] pstore: Registered ramoops as persistent store backend
118[ 0.985001] ramoops: attached 0x200000@0xffe00000, ecc: 0/0
119[ 0.985942] cpuidle: using governor menu
120[ 0.987076] bpmp: waiting for handshake
121[ 0.987163] bpmp: handshake completed
122[ 0.987240] bpmp: synchronizing channels
123[ 0.987314] bpmp: channels synchronized
124[ 0.987382] bpmp: mail init ok
125[ 0.994227] arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2
126[ 0.997466] arm-smmu 12000000.iommu: probing hardware configuration...
127[ 0.997593] arm-smmu 12000000.iommu: SMMUv2 with:
128[ 0.997676] arm-smmu 12000000.iommu: stage 1 translation
129[ 0.997770] arm-smmu 12000000.iommu: stage 2 translation
130[ 1.000178] arm-smmu 12000000.iommu: nested translation
131[ 1.005534] arm-smmu 12000000.iommu: stream matching with 128 register groups
132[ 1.012782] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only)
133[ 1.019456] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000
134[ 1.025900] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
135[ 1.032207] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
136[ 1.045025] vdso: 2 pages (1 code @ ffffff8008e66000, 1 data @ ffffff8009a84000)
137[ 1.046457] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
138[ 1.055878] DMA: preallocated 256 KiB pool for atomic allocations
139[ 1.059973] Registering BPMP clocks...
140[ 1.063388] tegra_bpmp_clk_init: clock init ok (400 clks)
141[ 1.068903] tegra_bpmp_of_clk_init: EMC proxy not found.
142[ 1.074709] tegra_powergate_init: DONE
143[ 1.081347] Tegra reboot handler registered.
144[ 1.082467] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/automotive/kernel-dts/e3550/tegra194-e3550-0001-b03-A.dts
145[ 1.096076] DTB Build time: Nov 22 2019 15:18:05
146[ 1.122512] mc: mapped MMIO address: 0xffffff800a4a0000 -> 0x2c10000
147[ 1.122657] mc: mapped MMIO address: 0xffffff800a4c0000 -> 0x2c20000
148[ 1.122785] mc: mapped MMIO address: 0xffffff800a4e0000 -> 0x2c30000
149[ 1.122923] mc: mapped MMIO address: 0xffffff800a5b0000 -> 0x2c40000
150[ 1.126747] mc: mapped MMIO address: 0xffffff800a5d0000 -> 0x2c50000
151[ 1.133142] mc: mapped MMIO address: 0xffffff800a5f0000 -> 0x2b80000
152[ 1.139630] mc: mapped MMIO address: 0xffffff800a610000 -> 0x2b90000
153[ 1.145816] mc: mapped MMIO address: 0xffffff800a630000 -> 0x2ba0000
154[ 1.152201] mc: mapped MMIO address: 0xffffff800a650000 -> 0x2bb0000
155[ 1.158761] mc: mapped MMIO address: 0xffffff800a670000 -> 0x1700000
156[ 1.165148] mc: mapped MMIO address: 0xffffff800a690000 -> 0x1710000
157[ 1.171627] mc: mapped MMIO address: 0xffffff800a6b0000 -> 0x1720000
158[ 1.178014] mc: mapped MMIO address: 0xffffff800a6d0000 -> 0x1730000
159[ 1.184399] mc: mapped MMIO address: 0xffffff800a6f0000 -> 0x1740000
160[ 1.190787] mc: mapped MMIO address: 0xffffff800a710000 -> 0x1750000
161[ 1.197177] mc: mapped MMIO address: 0xffffff800a730000 -> 0x1760000
162[ 1.203562] mc: mapped MMIO address: 0xffffff800a750000 -> 0x1770000
163[ 1.210082] mc-err: mcerr ops are set to t19x
164[ 1.216225] tegra-reset 0.bpmp_reset: registered 190 resets.
165[ 1.221493] iommu: Adding device d000000.bpmp to group 0
166[ 1.225465] bpmp: ping status is 0
167[ 1.228726] bpmp d000000.bpmp: firmware tag is fef159d9ac0058142d7f35174d6c38c5
168[ 1.240138] bpmp d000000.bpmp: probe ok
169[ 1.247024] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio)
170[ 1.254070] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon)
171[ 1.258050] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3
172[ 1.262414] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256
173[ 1.271920] arm64_ras arm64_ras: probed
174[ 1.274812] ras_fhi_enable: FHI 461 enabled on CPU0
175[ 1.278120] ras_fhi_enable: FHI 462 enabled on CPU1
176[ 1.283039] ras_fhi_enable: FHI 463 enabled on CPU2
177[ 1.287937] ras_fhi_enable: FHI 464 enabled on CPU3
178[ 1.292731] ras_fhi_enable: FHI 465 enabled on CPU4
179[ 1.297718] ras_fhi_enable: FHI 466 enabled on CPU5
180[ 1.302759] ras_fhi_enable: FHI 467 enabled on CPU6
181[ 1.307605] ras_fhi_enable: FHI 468 enabled on CPU7
182[ 1.312759] carmel_ras_enable: RAS enabled on cpu0
183[ 1.312935] carmel_ras_enable: RAS enabled on cpu1
184[ 1.313148] carmel_ras_enable: RAS enabled on cpu2
185[ 1.313380] carmel_ras_enable: RAS enabled on cpu3
186[ 1.313621] carmel_ras_enable: RAS enabled on cpu4
187[ 1.313831] carmel_ras_enable: RAS enabled on cpu5
188[ 1.314049] carmel_ras_enable: RAS enabled on cpu6
189[ 1.314283] carmel_ras_enable: RAS enabled on cpu7
190[ 1.314431] carmel_ras carmel_ras: probed
191[ 1.357434] tegra-cbb 2300000.cbb-noc: secure_irq = 470, nonsecure_irq = 469>
192[ 1.364571] tegra-cbb c600000.aon-noc: secure_irq = 472, nonsecure_irq = 471>
193[ 1.371717] tegra-cbb d600000.bpmp-noc: secure_irq = 474, nonsecure_irq = 473>
194[ 1.379085] tegra-cbb be00000.rce-noc: secure_irq = 476, nonsecure_irq = 475>
195[ 1.385936] tegra-cbb b600000.sce-noc: secure_irq = 478, nonsecure_irq = 477>
196[ 1.393083] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet
197[ 1.411194] vdd_otp: 5000 mV
198[ 1.411720] vdd_dummy: 5000 mV
199[ 1.412724] vdd_otp_1v8: 1800 mV
200[ 1.413289] vdd_otp_3v3: 3300 mV
201[ 1.413794] vdd_otp_1v2: 1200 mV
202[ 1.431385] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
203[ 1.436840] tegra-pmc c360000.pmc: create /sys/kernel/debug/PMC/boot-chain-type
204[ 1.437188] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0
205[ 1.437351] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET
206[ 1.440398] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0
207[ 1.446607] tegra-pmc: ### PMC reset status reg: 0x0
208[ 1.451499] tegra-pmc: PMC Prod config success
209[ 1.458115] eventlib_kernel: keventlib is initialized, test id: 0
210[ 1.462765] SCSI subsystem initialized
211[ 1.466193] usbcore: registered new interface driver usbfs
212[ 1.471328] usbcore: registered new interface driver hub
213[ 1.476878] usbcore: registered new device driver usb
214[ 1.482504] iommu: Adding device 3160000.i2c to group 1
215[ 1.490718] iommu: Adding device c240000.i2c to group 1
216[ 1.495000] iommu: Adding device 3180000.i2c to group 1
217[ 1.500184] iommu: Adding device 3190000.i2c to group 1
218[ 1.505014] iommu: Adding device 31b0000.i2c to group 1
219[ 1.510076] iommu: Adding device 31c0000.i2c to group 1
220[ 1.515564] iommu: Adding device c250000.i2c to group 1
221[ 1.520598] iommu: Adding device 31e0000.i2c to group 1
222[ 1.529037] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1
223[ 1.532910] max77620-sd0: supplied by regulator-dummy
224[ 1.534237] max77620-sd0: at 1000 mV
225[ 1.538408] max77620-sd1: supplied by regulator-dummy
226[ 1.543175] max77620-sd1: at 1800 mV
227[ 1.547381] max77620-sd2: supplied by regulator-dummy
228[ 1.552000] max77620-sd2: at 1800 mV
229[ 1.555941] max77620-sd3: supplied by regulator-dummy
230[ 1.560965] max77620-sd3: at 1800 mV
231[ 1.565073] max77620-sd4: supplied by regulator-dummy
232[ 1.569888] max77620-sd4: at 1100 mV
233[ 1.573993] max77620-ldo0: supplied by regulator-dummy
234[ 1.578862] max77620-ldo0: at 800 mV
235[ 1.582392] max77620-ldo1: supplied by regulator-dummy
236[ 1.587717] max77620-ldo1: at 2375 mV
237[ 1.591831] max77620-ldo2: supplied by regulator-dummy
238[ 1.596958] max77620-ldo2: at 3300 mV
239[ 1.601015] max77620-ldo3: supplied by regulator-dummy
240[ 1.605917] max77620-ldo3: at 3300 mV
241[ 1.610014] max77620-ldo4: supplied by regulator-dummy
242[ 1.614956] max77620-ldo4: at 1587 mV
243[ 1.618865] max77620-ldo5: supplied by regulator-dummy
244[ 1.623914] max77620-ldo5: at 3300 mV
245[ 1.627823] max77620-ldo6: supplied by regulator-dummy
246[ 1.633003] max77620-ldo6: at 3300 mV
247[ 1.636901] max77620-ldo7: supplied by regulator-dummy
248[ 1.642054] max77620-ldo7: at 1200 mV
249[ 1.646043] max77620-ldo8: supplied by regulator-dummy
250[ 1.651060] max77620-ldo8: at 1800 mV
251[ 1.659002] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio)
252[ 1.663369] max77620 4-003c: max77620 probe successful
253[ 1.669399] media: Linux media interface: v0.10
254[ 1.672962] Linux video capture interface: v2.00
255[ 1.679562] pps_core: LinuxPPS API ver. 1 registered
256[ 1.682338] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
257[ 1.691308] PTP clock support registered
258[ 1.698879] trusty trusty: trusty version: Built: 13:20:32 Sep 6 2019
259[ 1.701821] trusty trusty: selected api version: 3 (requested 3)
260[ 1.710882] usb0-vbus: 5000 mV
261[ 1.711346] usb1-vbus: 5000 mV
262[ 1.714105] usb2-vbus: 5000 mV
263[ 1.719185] camchar: rtcpu character device driver loaded
264[ 1.723781] clocksource: Switched to clocksource arch_sys_counter
265[ 1.791225] VFS: Disk quotas dquot_6.6.0
266[ 1.791471] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
267[ 1.791997] nvmap_heap_init: nvmap_heap_init: created heap block cache
268[ 1.792670] iommu: Adding device 2600000.dma to group 1
269[ 1.793833] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores
270[ 1.794076] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x0000000870000000,134217728
271[ 1.794257] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf
272[ 1.794394] nvmap_page_pool_init: Total RAM pages: 8064837
273[ 1.794497] nvmap_page_pool_init: nvmap page pool size: 1008104 pages (3937 MB)
274[ 1.794766] nvmap_background_zero_thread: PP zeroing thread starting.
275[ 1.795134] misc nvmap: created heap vpr base 0x0000000870000000 size (131072KiB)
276[ 1.800354] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels
277[ 1.808781] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm
278[ 1.817470] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm
279[ 1.826037] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm
280[ 1.834717] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm
281[ 1.843150] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type tj-therm
282[ 1.851537] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra
283[ 1.861432] la/ptsa driver initialized.
284[ 1.864809] NET: Registered protocol family 2
285[ 1.869581] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
286[ 1.877505] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
287[ 1.884432] TCP: Hash tables configured (established 262144 bind 65536)
288[ 1.889849] UDP hash table entries: 16384 (order: 9, 2097152 bytes)
289[ 1.896909] UDP-Lite hash table entries: 16384 (order: 9, 2097152 bytes)
290[ 1.903595] NET: Registered protocol family 1
291[ 1.907623] RPC: Registered named UNIX socket transport module.
292[ 1.912896] RPC: Registered udp transport module.
293[ 1.917619] RPC: Registered tcp transport module.
294[ 1.922355] RPC: Registered tcp NFSv4.1 backchannel transport module.
295[ 1.928744] PCI: CLS 0 bytes, default 64
296[ 1.929036] Unpacking initramfs...
297[ 1.953815] Freeing initrd memory: 4980K
298[ 1.956355] iommu: Adding device 13e10000.host1x to group 2
299[ 1.973971] host1x 13e10000.host1x: initialized
300[ 1.977816] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
301[ 1.979408] audit: initializing netlink subsys (disabled)
302[ 1.979841] audit: type=2000 audit(1.968:1): state=initialized audit_enabled=0 res=1
303[ 1.980300] workingset: timestamp_bits=46 max_order=23 bucket_order=0
304[ 1.989557] squashfs: version 4.0 (2009/01/31) Phillip Lougher
305[ 1.990902] NFS: Registering the id_resolver key type
306[ 1.991020] Key type id_resolver registered
307[ 1.991132] Key type id_legacy registered
308[ 1.993236] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
309[ 2.000034] ntfs: driver 2.1.32 [Flags: R/W].
310[ 2.010839] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239)
311[ 2.012087] io scheduler noop registered (default)
312[ 2.016810] io scheduler cfq registered
313[ 2.020525] io scheduler mq-deadline registered
314[ 2.025249] io scheduler kyber registered
315[ 2.033777] gic 2a41000.agic-controller: GIC IRQ controller registered
316[ 2.150647] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered
317[ 2.164534] tegra-pwm c340000.pwm: PWM clk can sleep in ops
318[ 2.165577] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops
319[ 2.166275] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops
320[ 2.169643] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
321[ 2.169984] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=2090250, vi_iso_bw=3436125, max_bw=3436125
322[ 2.173402] nvdec 15480000.nvdec: Creating tegra-iommu group 1
323[ 2.173809] iommu: Adding device 15480000.nvdec to group 3
324[ 2.178120] nvdec 15480000.nvdec: initialized
325[ 2.178368] nvdec 15140000.nvdec1: Adding to tegra-iommu group 1
326[ 2.178648] iommu: Adding device 15140000.nvdec1 to group 3
327[ 2.182339] nvdec 15140000.nvdec1: initialized
328[ 2.183235] iommu: Adding device 14800000.isp to group 4
329[ 2.185834] falcon 15340000.vic: Adding to tegra-iommu group 1
330[ 2.186015] iommu: Adding device 15340000.vic to group 3
331[ 2.188399] falcon 15340000.vic: initialized
332[ 2.188870] falcon 15380000.nvjpg: Adding to tegra-iommu group 1
333[ 2.189084] iommu: Adding device 15380000.nvjpg to group 3
334[ 2.191275] falcon 15380000.nvjpg: initialized
335[ 2.191475] falcon 154c0000.nvenc: Adding to tegra-iommu group 1
336[ 2.191713] iommu: Adding device 154c0000.nvenc to group 3
337[ 2.194150] falcon 154c0000.nvenc: initialized
338[ 2.195180] falcon 15a80000.nvenc1: Adding to tegra-iommu group 1
339[ 2.201417] iommu: Adding device 15a80000.nvenc1 to group 3
340[ 2.209224] falcon 15a80000.nvenc1: initialized
341[ 2.212693] iommu: Adding device 13e10000.host1x:ctx0 to group 5
342[ 2.217699] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56)
343[ 2.225411] iommu: Adding device 13e10000.host1x:ctx1 to group 6
344[ 2.230561] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57)
345[ 2.238386] iommu: Adding device 13e10000.host1x:ctx2 to group 7
346[ 2.243906] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58)
347[ 2.251831] iommu: Adding device 13e10000.host1x:ctx3 to group 8
348[ 2.257345] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59)
349[ 2.265109] iommu: Adding device 13e10000.host1x:ctx4 to group 9
350[ 2.270545] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60)
351[ 2.278180] iommu: Adding device 13e10000.host1x:ctx5 to group 10
352[ 2.283954] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61)
353[ 2.291486] iommu: Adding device 13e10000.host1x:ctx6 to group 11
354[ 2.297294] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62)
355[ 2.304904] iommu: Adding device 13e10000.host1x:ctx7 to group 12
356[ 2.310795] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63)
357[ 2.322347] t194-nvcsi 15a00000.nvcsi: context isolation disabled due to no IOMMU
358[ 2.325721] t194-nvcsi 15a00000.nvcsi: initialized
359[ 2.331061] arm-smmu: Adding 15c10000.vi to ISO SMMU client
360[ 2.335849] iommu: Adding device 15c10000.vi to group 13
361[ 2.347918] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU
362[ 2.350587] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized
363[ 2.357095] scare-pigeon 14b00000.isp-thi: context isolation disabled due to no IOMMU
364[ 2.364654] scare-pigeon 14b00000.isp-thi: initialized
365[ 2.370342] iommu: Adding device 16000000.pva0 to group 14
366[ 2.387098] pva 16000000.pva0: initialized
367[ 2.388238] iommu: Adding device 16800000.pva1 to group 15
368[ 2.393883] pva 16800000.pva1: initialized
369[ 2.395008] nvdla 15880000.nvdla0: Adding to tegra-iommu group 1
370[ 2.395187] iommu: Adding device 15880000.nvdla0 to group 3
371[ 2.429375] nvdla 15880000.nvdla0: initialized
372[ 2.430224] nvdla 158c0000.nvdla1: Adding to tegra-iommu group 1
373[ 2.430396] iommu: Adding device 158c0000.nvdla1 to group 3
374[ 2.435288] nvdla 158c0000.nvdla1: initialized
375[ 2.436936] scrncapt: init (heads:4 wins:6 planes:4)
376[ 2.437141] tegradccommon 15200000.dc_common: host1x channel mapped
377[ 2.437268] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated
378[ 2.438808] tegradccommon 15200000.dc_common: dma mapping done
379[ 2.443002] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 16 channels
380[ 2.444746] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized
381[ 2.445096] kfuse 3830000.kfuse: initialized
382[ 2.449415] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
383[ 2.450991] iommu: Adding device c280000.serial to group 1
384[ 2.451304] c280000.serial: ttyS0 at MMIO 0xc280000 (irq = 46, base_baud = 25500000) is a Tegra
385[ 2.452379] iommu: Adding device 3110000.serial to group 1
386[ 2.453436] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 45, base_baud = 0) is a TEGRA_UART
387[ 2.499446] console [ttyTCU0] enabled
388[ 2.500097] arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client
389[ 2.500286] iommu: Adding device 15200000.nvdisplay to group 16
390[ 2.500585] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor
391[ 2.500607] generic_infoframe_type: 0x87
392[ 2.500653] tegradc 15200000.nvdisplay: DT parsed successfully
393[ 2.500695] tegradc 15200000.nvdisplay: Display dc.ffffff800c390000 registered with id=0
394[ 2.504956] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s
395[ 2.504965] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 1066500000 Hz
396[ 2.504972] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 356000000 Hz
397[ 2.505256] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0
398[ 2.505262] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0
399[ 2.507773] tegradc 15200000.nvdisplay: hdmi: board prod-setting covers partial!
400[ 2.513919] tegradc 15200000.nvdisplay: probed
401[ 2.679481] bootconsole [tegra_comb_uart0] disabled
402[ 2.689279] tegradc 15200000.nvdisplay: fb registered
403[ 2.689519] gpio tegra-gpio wake60 for gpio=96(M:0)
404[ 2.689878] arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client
405[ 2.690053] iommu: Adding device 15210000.nvdisplay to group 16
406[ 2.690124] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor1
407[ 2.690145] generic_infoframe_type: 0x87
408[ 2.690193] tegradc 15210000.nvdisplay: DT parsed successfully
409[ 2.690221] tegradc 15210000.nvdisplay: Display dc.ffffff800c430000 registered with id=1
410[ 2.690380] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1
411[ 2.690386] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1
412[ 2.692513] tegradc 15210000.nvdisplay: hdmi: board prod-setting covers partial!
413[ 2.697606] tegradc 15210000.nvdisplay: probed
414[ 2.761389] tegradc 15210000.nvdisplay: fb registered
415[ 2.766487] gpio tegra-gpio wake63 for gpio=97(M:1)
416[ 2.766846] arm-smmu: Adding 15220000.nvdisplay to ISO SMMU client
417[ 2.777852] iommu: Adding device 15220000.nvdisplay to group 16
418[ 2.783843] tegradc 15220000.nvdisplay: disp2 connected to head2->/host1x/sor2
419[ 2.790984] generic_infoframe_type: 0x87
420[ 2.795011] tegradc 15220000.nvdisplay: DT parsed successfully
421[ 2.800801] tegradc 15220000.nvdisplay: Display dc.ffffff800c4e0000 registered with id=2
422[ 2.803609] tegra_profiler: version: 1.135, samples/io: 47/26
423[ 2.803831] tegra_profiler: auth: init
424[ 2.805045] iommu: Adding device 2450000.ufshci to group 17
425[ 2.805660] ufs_tegra 2450000.ufshci: freq-table-hz property not specified
426[ 2.805670] ufs_tegra 2450000.ufshci: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
427[ 2.820885] scsi host0: ufshcd
428[ 2.836773] iommu: Adding device c260000.spi to group 1
429[ 2.847980] ufs_tegra 2450000.ufshci: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
430[ 2.847987] ufs_tegra 2450000.ufshci: dme-link-startup Successful
431[ 2.849540] ufs_tegra 2450000.ufshci: MPhy Receiver Calibration passed
432[ 2.876162] tegradc 15220000.nvdisplay: vblank syncpt # 13 for dc 2
433[ 2.877320] libphy: Fixed MDIO Bus: probed
434[ 2.877592] tun: Universal TUN/TAP device driver, 1.6
435[ 2.877873] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
436[ 2.877878] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
437[ 2.877908] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
438[ 2.877912] igb: Copyright (c) 2007-2014 Intel Corporation.
439[ 2.878164] eqos 2490000.ethernet: Creating tegra-iommu group 2
440[ 2.878433] iommu: Adding device 2490000.ethernet to group 18
441[ 2.878911] eqos 2490000.ethernet: get_dt_u32(): "nvidia,max-platform-mtu" read failed -22. Using default
442[ 2.879268] eqos 2490000.ethernet: no PHY interrupt found
443[ 2.879274] eqos 2490000.ethernet: no PHY reset gpio found
444[ 2.883600] eqos 2490000.ethernet: Setting local MAC: 0 4 4b a4 eb eb
445[ 2.886114] PPP generic driver version 2.4.2
446[ 2.886255] PPP BSD Compression module registered
447[ 2.886261] PPP Deflate Compression module registered
448[ 2.886301] PPP MPPE Compression module registered
449[ 2.886345] usbcore: registered new interface driver r8152
450[ 2.886374] usbcore: registered new interface driver asix
451[ 2.886403] usbcore: registered new interface driver ax88179_178a
452[ 2.886424] usbcore: registered new interface driver cdc_ether
453[ 2.886448] usbcore: registered new interface driver net1080
454[ 2.886471] usbcore: registered new interface driver cdc_subset
455[ 2.886492] usbcore: registered new interface driver zaurus
456[ 2.886523] usbcore: registered new interface driver cdc_ncm
457[ 2.886699] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
458[ 2.886712] ohci-pci: OHCI PCI platform driver
459[ 2.886739] ohci-platform: OHCI generic platform driver
460[ 2.887673] iommu: Adding device 3610000.xhci to group 19
461[ 2.892081] tegra-xusb 3610000.xhci: No USB port has OTG_CAP
462[ 2.895843] usbcore: registered new interface driver uas
463[ 2.895881] usbcore: registered new interface driver usb-storage
464[ 2.897009] iommu: Adding device 3550000.xudc to group 20
465[ 2.897429] tegra-xusb 3610000.xhci: Firmware timestamp: 2018-03-29 14:24:42 UTC, Version: 60.05 release
466[ 2.897490] tegra-xusb 3610000.xhci: xHCI Host Controller
467[ 2.897527] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1
468[ 2.898478] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000010810
469[ 2.898694] tegra-xusb 3610000.xhci: irq 457, io mem 0x03610000
470[ 2.898908] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
471[ 2.898914] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
472[ 2.898919] usb usb1: Product: xHCI Host Controller
473[ 2.898924] usb usb1: Manufacturer: Linux 4.14.134-rt63-tegra xhci-hcd
474[ 2.898928] usb usb1: SerialNumber: 3610000.xhci
475[ 2.899378] hub 1-0:1.0: USB hub found
476[ 2.899421] hub 1-0:1.0: 4 ports detected
477[ 2.900078] Could not get extcon-dev /xudc@3550000:vbus(0)
478[ 2.900197] tegra-xusb 3610000.xhci: xHCI Host Controller
479[ 2.900215] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2
480[ 2.900225] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed
481[ 2.900400] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
482[ 2.900406] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
483[ 2.900411] usb usb2: Product: xHCI Host Controller
484[ 2.900416] usb usb2: Manufacturer: Linux 4.14.134-rt63-tegra xhci-hcd
485[ 2.900420] usb usb2: SerialNumber: 3610000.xhci
486[ 2.900807] mousedev: PS/2 mouse device common for all mice
487[ 2.900882] usbcore: registered new interface driver xpad
488[ 2.901067] hub 2-0:1.0: USB hub found
489[ 2.901100] hub 2-0:1.0: 4 ports detected
490[ 2.952251] ufs_tegra 2450000.ufshci: default ref_clk_freq = 0
491[ 2.955539] ufs_tegra 2450000.ufshci: HS Mode RX_Gear:gear_3 TX_Gear:gear_3 RATE_B series
492[ 2.955576] ufs_tegra 2450000.ufshci: ufs scrambling feature enabled
493[ 2.955604] ufs_tegra 2450000.ufshci: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
494[ 2.956571] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUEGAJ1ZD-B0CP 5200 PQ: 0 ANSI: 6
495[ 2.957900] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUEGAJ1ZD-B0CP 5200 PQ: 0 ANSI: 6
496[ 2.958986] scsi 0:0:0:0: Direct-Access SAMSUNG KLUEGAJ1ZD-B0CP 5200 PQ: 0 ANSI: 6
497[ 2.960358] scsi 0:0:0:1: Direct-Access SAMSUNG KLUEGAJ1ZD-B0CP 5200 PQ: 0 ANSI: 6
498[ 2.961488] scsi 0:0:0:2: Direct-Access SAMSUNG KLUEGAJ1ZD-B0CP 5200 PQ: 0 ANSI: 6
499[ 3.034415] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
500[ 3.035918] Wake73 for irq=42
501[ 3.037153] rtc rtc1: alarm rtc device
502[ 3.037166] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1
503[ 3.037224] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock
504[ 3.037379] i2c /dev entries driver
505[ 3.038528] IR NEC protocol handler initialized
506[ 3.038532] IR RC5(x/sz) protocol handler initialized
507[ 3.038535] IR RC6 protocol handler initialized
508[ 3.038538] IR JVC protocol handler initialized
509[ 3.038541] IR Sony protocol handler initialized
510[ 3.038544] IR SANYO protocol handler initialized
511[ 3.038546] IR Sharp protocol handler initialized
512[ 3.038550] IR MCE Keyboard/mouse protocol handler initialized
513[ 3.038571] IR XMP protocol handler initialized
514[ 3.038957] max77620-power max20024-power: Event recorder REG_NVERC : 0x40
515[ 3.040987] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 2 not supported
516[ 3.044087] device-mapper: uevent: version 1.0.3
517[ 3.044401] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
518[ 3.061441] sched-energy: Sched-energy-costs installed from DT
519[ 3.063773] CPU2: update max cpu_capacity 1024
520[ 3.064796] tegra194_cpufreq_probe: platform driver Initialization: pass
521[ 3.065379] sdhci: Secure Digital Host Controller Interface driver
522[ 3.065383] sdhci: Copyright(c) Pierre Ossman
523[ 3.065404] sdhci-pltfm: SDHCI platform and OF driver helper
524[ 3.065767] iommu: Adding device 3460000.sdhci to group 21
525[ 3.066034] sdhci-tegra 3460000.sdhci: runtime pm disabled
526[ 3.067261] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful
527[ 3.069612] iommu: Adding device 3400000.sdhci to group 22
528[ 3.069812] sdhci-tegra 3400000.sdhci: runtime pm disabled
529[ 3.071296] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful
530[ 3.076257] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete
531[ 3.111778] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit
532[ 3.115786] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit
533[ 3.157595] mmc1: Switching to 1.8V signalling voltage failed
534[ 3.165544] mmc1: new DDR MMC card at address 0001
535[ 3.166019] mmcblk1: mmc1:0001 008G30 7.28 GiB
536[ 3.166170] mmcblk1boot0: mmc1:0001 008G30 partition 1 8.00 MiB
537[ 3.166367] mmcblk1boot1: mmc1:0001 008G30 partition 2 8.00 MiB
538[ 3.166533] mmcblk1rpmb: mmc1:0001 008G30 partition 3 4.00 MiB
539[ 3.178586] mmc0: periodic cache flush enabled
540[ 3.178599] mmc0: new HS400 Enhanced strobe MMC card at address 0001
541[ 3.178973] mmcblk0: mmc0:0001 DJUD4R 119 GiB
542[ 3.179146] mmcblk0boot0: mmc0:0001 DJUD4R partition 1 31.9 MiB
543[ 3.179301] mmcblk0boot1: mmc0:0001 DJUD4R partition 2 31.9 MiB
544[ 3.179437] mmcblk0rpmb: mmc0:0001 DJUD4R partition 3 4.00 MiB
545[ 3.182082] mmcblk0: p1 p2 p3 p4 p5
546[ 3.235781] usb 1-1: new low-speed USB device number 2 using tegra-xusb
547[ 3.388473] usb 1-1: New USB device found, idVendor=03f0, idProduct=094a
548[ 3.388481] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
549[ 3.388485] usb 1-1: Product: HP USB Optical Mouse
550[ 3.388489] usb 1-1: Manufacturer: PixArt
551[ 3.515779] usb 1-2: new full-speed USB device number 3 using tegra-xusb
552[ 3.586066] tegradc 15220000.nvdisplay: vpulse3 syncpt # 14 for dc 2
553[ 3.588400] tegradc 15220000.nvdisplay: hdmi: board prod-setting covers partial!
554[ 3.593560] tegradc 15220000.nvdisplay: probed
555[ 3.604466] tegradc 15220000.nvdisplay: fb registered
556[ 3.604668] gpio tegra-gpio wake71 for gpio=98(M:2)
557[ 3.604925] tegra-se-nvhost 15810000.se: Creating tegra-iommu group 4
558[ 3.605130] iommu: Adding device 15810000.se to group 23
559[ 3.606398] tegra-se-nvhost 15810000.se: initialized
560[ 3.608957] tegra-se-nvhost 15810000.se: tegra_se_probe: complete
561[ 3.609255] arm-smmu: Adding 15230000.nvdisplay to ISO SMMU client
562[ 3.609437] iommu: Adding device 15230000.nvdisplay to group 16
563[ 3.609534] tegradc 15230000.nvdisplay: disp3 connected to head3->/host1x/sor3
564[ 3.609554] generic_infoframe_type: 0x87
565[ 3.609612] tegradc 15230000.nvdisplay: DT parsed successfully
566[ 3.609635] tegradc 15230000.nvdisplay: Display dc.ffffff800d490000 registered with id=3
567[ 3.609871] tegradc 15230000.nvdisplay: vblank syncpt # 16 for dc 3
568[ 3.609876] tegradc 15230000.nvdisplay: vpulse3 syncpt # 17 for dc 3
569[ 3.611909] tegradc 15230000.nvdisplay: hdmi: board prod-setting covers partial!
570[ 3.616873] tegradc 15230000.nvdisplay: probed
571[ 3.668639] usb 1-2: New USB device found, idVendor=046d, idProduct=c52b
572[ 3.668645] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
573[ 3.668649] usb 1-2: Product: USB Receiver
574[ 3.668652] usb 1-2: Manufacturer: Logitech
575[ 3.720912] tegradc 15230000.nvdisplay: fb registered
576[ 3.720949] extcon-disp-state external-connection:disp-state: cable 40 state 1
577[ 3.720952] Extcon HDMI: HPD enabled
578[ 3.720958] tegradc 15200000.nvdisplay: hdmi: plugged
579[ 3.742335] gpio tegra-gpio wake66 for gpio=99(M:3)
580[ 3.742600] tegra-se-nvhost 15820000.se: Adding to tegra-iommu group 4
581[ 3.753587] iommu: Adding device 15820000.se to group 23
582[ 3.759911] tegra-se-nvhost 15820000.se: initialized
583[ 3.766287] tegra-se-nvhost 15820000.se: tegra_se_probe: complete
584[ 3.770328] tegra-se-nvhost 15830000.se: Adding to tegra-iommu group 4
585[ 3.776694] iommu: Adding device 15830000.se to group 23
586[ 3.782691] tegra-se-nvhost 15830000.se: initialized
587[ 3.788609] tegra-se-nvhost 15830000.se: tegra_se_probe: complete
588[ 3.793144] tegra-se-nvhost 15840000.se: Adding to tegra-iommu group 4
589[ 3.799547] iommu: Adding device 15840000.se to group 23
590[ 3.805656] tegra-se-nvhost 15840000.se: initialized
591[ 3.811617] tegra-se-nvhost 15840000.se: tegra_se_probe: complete
592[ 3.816232] hidraw: raw HID events driver (C) Jiri Kosina
593[ 3.823921] input: PixArt HP USB Optical Mouse as /devices/3610000.xhci/usb1/1-1/1-1:1.0/0003:03F0:094A.0001/input/input0
594[ 3.832620] hid-generic 0003:03F0:094A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-3610000.xhci-1/input0
595[ 3.850750] usbcore: registered new interface driver usbhid
596[ 3.850865] usbhid: USB HID core driver
597[ 3.854778] iommu: Adding device bc00000.rtcpu to group 24
598[ 3.860644] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed
599[ 3.869336] denver_knobs_init:MTS_VERSION:45309758
600[ 3.873322] nvadsp 2993000.adsp: Adding to tegra-iommu group 2
601[ 3.878365] iommu: Adding device 2993000.adsp to group 18
602[ 3.883658] nvadsp 2993000.adsp: in probe()...
603[ 3.889352] nvadsp 2993000.adsp: nvadsp_app_module_probe
604[ 3.894378] t19x_cache tegra-cache: probed
605[ 3.904562] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304
606[ 3.905609] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB)
607[ 3.913968] hw perfevents: enabled with carmel_uncore_pmu PMU driver, 2 counters available
608[ 3.923432] trusty-virtio trusty:virtio: initializing
609[ 3.926808] trusty_ipc virtio0: vring0: va(pa) ffffffc7bc874000(0) qsz 32 notifyid 1
610[ 3.934231] trusty_ipc virtio0: vring1: va(pa) ffffffc7bc876000(0) qsz 32 notifyid 2
611[ 3.942246] trusty_ipc virtio0: is online
612[ 3.942288] trusty-virtio trusty:virtio: initializing done
613[ 3.942514] tegra_hv: get_hvd: not initialized yet
614[ 3.942519] user_ivc_mempool: hypervisor not present
615[ 3.950718] u32 classifier
616[ 3.950723] Actions configured
617[ 3.950841] Initializing XFRM netlink socket
618[ 3.951360] NET: Registered protocol family 10
619[ 3.952373] Segment Routing with IPv6
620[ 3.952408] NET: Registered protocol family 17
621[ 3.952422] NET: Registered protocol family 15
622[ 3.952476] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
623[ 3.952555] 9pnet: Installing 9P2000 support
624[ 3.952583] Key type dns_resolver registered
625[ 3.954190] registered taskstats version 1
626[ 3.954541] iommu: Adding device 14180000.pcie to group 25
627[ 3.954895] tegra-pcie-dw 14180000.pcie: Setting init speed to max speed
628[ 3.956085] OF: PCI: host bridge /pcie@14180000 ranges:
629[ 3.956118] OF: PCI: IO 0x38100000..0x381fffff -> 0x38100000
630[ 3.956128] OF: PCI: MEM 0x1800000000..0x1b3fffffff -> 0x1800000000
631[ 3.956134] OF: PCI: MEM 0x1b40000000..0x1bffffffff -> 0x40000000
632[ 4.067792] tegra-pcie-dw 14180000.pcie: link is up
633[ 4.068089] tegra-pcie-dw 14180000.pcie: PCI host bridge to bus 0000:00
634[ 4.068220] pci_bus 0000:00: root bus resource [bus 00-ff]
635[ 4.068333] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x38100000-0x381fffff])
636[ 4.077104] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1b3fffffff pref]
637[ 4.084892] pci_bus 0000:00: root bus resource [mem 0x1b40000000-0x1bffffffff] (bus address [0x40000000-0xffffffff])
638[ 4.095588] pci 0000:00:00.0: [10de:1ad0] type 01 class 0x060400
639[ 4.095759] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
640[ 4.096258] pci 0000:01:00.0: [11f8:8534] type 01 class 0x060400
641[ 4.097049] pci 0000:01:00.0: enabling Extended Tags
642[ 4.101609] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
643[ 4.102622] pci 0000:01:00.1: [11f8:8534] type 00 class 0x058000
644[ 4.103501] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x003fffff 64bit]
645[ 4.103986] pci 0000:01:00.1: enabling Extended Tags
646[ 4.106225] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
647[ 4.107148] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
648[ 4.114249] pci 0000:02:00.0: [11f8:8534] type 01 class 0x060400
649[ 4.114969] pci 0000:02:00.0: enabling Extended Tags
650[ 4.119548] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
651[ 4.120599] pci 0000:02:01.0: [11f8:8534] type 01 class 0x060400
652[ 4.121334] pci 0000:02:01.0: enabling Extended Tags
653[ 4.124491] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
654[ 4.125417] pci 0000:02:02.0: [11f8:8534] type 01 class 0x060400
655[ 4.126157] pci 0000:02:02.0: enabling Extended Tags
656[ 4.129485] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
657[ 4.130437] pci 0000:02:03.0: [11f8:8534] type 01 class 0x060400
658[ 4.131227] pci 0000:02:03.0: enabling Extended Tags
659[ 4.134318] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
660[ 4.135373] pci 0000:02:04.0: [11f8:8534] type 01 class 0x060400
661[ 4.136365] pci 0000:02:04.0: enabling Extended Tags
662[ 4.139338] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
663[ 4.140792] pci 0000:02:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
664[ 4.146369] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
665[ 4.154331] pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
666[ 4.162304] pci 0000:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
667[ 4.170432] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
668[ 4.179280] pci 0000:03:00.0: [10b5:8733] type 01 class 0x060400
669[ 4.179670] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x0003ffff]
670[ 4.181122] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
671[ 4.182331] pci 0000:03:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
672[ 4.187135] pci 0000:04:00.0: [10b5:8733] type 01 class 0x060400
673[ 4.188950] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
674[ 4.190195] pci 0000:04:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
675[ 4.195292] pci 0000:05:00.0: [10b5:8796] type 01 class 0x060400
676[ 4.195669] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x0003ffff]
677[ 4.197081] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
678[ 4.198728] pci 0000:05:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
679[ 4.203472] pci 0000:06:04.0: [10b5:8796] type 01 class 0x060400
680[ 4.205255] pci 0000:06:04.0: PME# supported from D0 D3hot D3cold
681[ 4.206191] pci 0000:06:08.0: [10b5:8796] type 01 class 0x060400
682[ 4.208010] pci 0000:06:08.0: PME# supported from D0 D3hot D3cold
683[ 4.208949] pci 0000:06:0c.0: [10b5:8796] type 01 class 0x060400
684[ 4.210723] pci 0000:06:0c.0: PME# supported from D0 D3hot D3cold
685[ 4.211687] pci 0000:06:10.0: [10b5:8796] type 01 class 0x060400
686[ 4.213512] pci 0000:06:10.0: PME# supported from D0 D3hot D3cold
687[ 4.214486] pci 0000:06:14.0: [10b5:8796] type 01 class 0x060400
688[ 4.216307] pci 0000:06:14.0: PME# supported from D0 D3hot D3cold
689[ 4.217281] pci 0000:06:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
690[ 4.217514] pci 0000:06:08.0: bridge configuration invalid ([bus 00-00]), reconfiguring
691[ 4.219015] pci 0000:06:0c.0: bridge configuration invalid ([bus 00-00]), reconfiguring
692[ 4.227065] pci 0000:06:10.0: bridge configuration invalid ([bus 00-00]), reconfiguring
693[ 4.235126] pci 0000:06:14.0: bridge configuration invalid ([bus 00-00]), reconfiguring
694[ 4.243602] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
695[ 4.244120] pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 08
696[ 4.244764] pci 0000:09:00.0: [12d8:2308] type 01 class 0x060400
697[ 4.246319] pci 0000:09:00.0: supports D1 D2
698[ 4.246324] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
699[ 4.247302] pci 0000:09:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
700[ 4.251916] pci 0000:0a:01.0: [12d8:2308] type 01 class 0x060400
701[ 4.253441] pci 0000:0a:01.0: supports D1 D2
702[ 4.253446] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold
703[ 4.254211] pci 0000:0a:02.0: [12d8:2308] type 01 class 0x060400
704[ 4.255783] pci 0000:0a:02.0: supports D1 D2
705[ 4.255788] pci 0000:0a:02.0: PME# supported from D0 D1 D2 D3hot D3cold
706[ 4.256850] pci 0000:0a:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
707[ 4.259266] pci 0000:0a:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
708[ 4.267969] pci 0000:0b:00.0: [1b21:1242] type 00 class 0x0c0330
709[ 4.268333] pci 0000:0b:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
710[ 4.268822] pci 0000:0b:00.0: enabling Extended Tags
711[ 4.272989] pci 0000:0b:00.0: PME# supported from D3hot D3cold
712[ 4.273782] pci_bus 0000:0b: busn_res: [bus 0b-ff] end is updated to 0b
713[ 4.274462] pci 0000:0c:00.0: [1b21:1242] type 00 class 0x0c0330
714[ 4.274826] pci 0000:0c:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
715[ 4.275316] pci 0000:0c:00.0: enabling Extended Tags
716[ 4.277976] pci 0000:0c:00.0: PME# supported from D3hot D3cold
717[ 4.278784] pci_bus 0000:0c: busn_res: [bus 0c-ff] end is updated to 0c
718[ 4.278822] pci_bus 0000:0a: busn_res: [bus 0a-ff] end is updated to 0c
719[ 4.278872] pci_bus 0000:09: busn_res: [bus 09-ff] end is updated to 0c
720[ 4.279491] pci 0000:0d:00.0: [1b21:2142] type 00 class 0x0c0330
721[ 4.279854] pci 0000:0d:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
722[ 4.280334] pci 0000:0d:00.0: enabling Extended Tags
723[ 4.282787] pci 0000:0d:00.0: PME# supported from D0
724[ 4.292056] pci_bus 0000:0d: busn_res: [bus 0d-ff] end is updated to 0d
725[ 4.292567] pci_bus 0000:0e: busn_res: [bus 0e-ff] end is updated to 0e
726[ 4.292604] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 0e
727[ 4.292641] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 0e
728[ 4.292690] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 0e
729[ 4.292726] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 0e
730[ 4.293324] pci_bus 0000:0f: busn_res: [bus 0f-ff] end is updated to 0f
731[ 4.294040] pci 0000:10:00.0: [1d6a:07b1] type 00 class 0x020000
732[ 4.294426] pci 0000:10:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
733[ 4.294572] pci 0000:10:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
734[ 4.294719] pci 0000:10:00.0: reg 0x20: [mem 0x00000000-0x003fffff 64bit]
735[ 4.294807] pci 0000:10:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
736[ 4.294932] pci 0000:10:00.0: enabling Extended Tags
737[ 4.295925] pci 0000:10:00.0: supports D1 D2
738[ 4.295931] pci 0000:10:00.0: PME# supported from D0 D1 D2 D3hot
739[ 4.296737] pci_bus 0000:10: busn_res: [bus 10-ff] end is updated to 10
740[ 4.297543] pci 0000:11:00.0: [1b4b:9485] type 00 class 0x010400
741[ 4.297907] pci 0000:11:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
742[ 4.298052] pci 0000:11:00.0: reg 0x18: [mem 0x00000000-0x0003ffff 64bit]
743[ 4.298292] pci 0000:11:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
744[ 4.298393] pci 0000:11:00.0: enabling Extended Tags
745[ 4.299196] pci 0000:11:00.0: supports D1
746[ 4.299201] pci 0000:11:00.0: PME# supported from D0 D1 D3hot
747[ 4.299973] pci_bus 0000:11: busn_res: [bus 11-ff] end is updated to 11
748[ 4.300702] pci 0000:12:00.0: [1d6a:07b1] type 00 class 0x020000
749[ 4.301107] pci 0000:12:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
750[ 4.301253] pci 0000:12:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
751[ 4.301401] pci 0000:12:00.0: reg 0x20: [mem 0x00000000-0x003fffff 64bit]
752[ 4.301484] pci 0000:12:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
753[ 4.301584] pci 0000:12:00.0: enabling Extended Tags
754[ 4.302479] pci 0000:12:00.0: supports D1 D2
755[ 4.302484] pci 0000:12:00.0: PME# supported from D0 D1 D2 D3hot
756[ 4.303281] pci_bus 0000:12: busn_res: [bus 12-ff] end is updated to 12
757[ 4.303383] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 12
758[ 4.306937] pci 0000:00:00.0: BAR 14: assigned [mem 0x1b40000000-0x1b41bfffff]
759[ 4.307074] pci 0000:00:00.0: BAR 15: assigned [mem 0x1800000000-0x18009fffff 64bit pref]
760[ 4.312403] pci 0000:00:00.0: BAR 13: assigned [io 0x1000-0x6fff]
761[ 4.318625] pci 0000:01:00.1: BAR 0: assigned [mem 0x1b40000000-0x1b403fffff 64bit]
762[ 4.326619] pci 0000:01:00.0: BAR 14: assigned [mem 0x1b40400000-0x1b419fffff]
763[ 4.333667] pci 0000:01:00.0: BAR 15: assigned [mem 0x1800000000-0x18009fffff 64bit pref]
764[ 4.342064] pci 0000:01:00.0: BAR 13: assigned [io 0x1000-0x6fff]
765[ 4.348373] pci 0000:02:02.0: BAR 14: assigned [mem 0x1b40400000-0x1b409fffff]
766[ 4.355714] pci 0000:02:04.0: BAR 14: assigned [mem 0x1b40a00000-0x1b40ffffff]
767[ 4.363064] pci 0000:02:00.0: BAR 14: assigned [mem 0x1b41000000-0x1b414fffff]
768[ 4.370414] pci 0000:02:00.0: BAR 15: assigned [mem 0x1800000000-0x18001fffff 64bit pref]
769[ 4.378726] pci 0000:02:01.0: BAR 14: assigned [mem 0x1b41500000-0x1b416fffff]
770[ 4.385815] pci 0000:02:01.0: BAR 15: assigned [mem 0x1800200000-0x18003fffff 64bit pref]
771[ 4.394039] pci 0000:02:02.0: BAR 15: assigned [mem 0x1800400000-0x18005fffff 64bit pref]
772[ 4.402352] pci 0000:02:03.0: BAR 14: assigned [mem 0x1b41700000-0x1b418fffff]
773[ 4.409520] pci 0000:02:03.0: BAR 15: assigned [mem 0x1800600000-0x18007fffff 64bit pref]
774[ 4.417839] pci 0000:02:04.0: BAR 15: assigned [mem 0x1800800000-0x18009fffff 64bit pref]
775[ 4.426151] pci 0000:02:00.0: BAR 13: assigned [io 0x1000-0x2fff]
776[ 4.432369] pci 0000:02:01.0: BAR 13: assigned [io 0x3000-0x3fff]
777[ 4.438577] pci 0000:02:02.0: BAR 13: assigned [io 0x4000-0x4fff]
778[ 4.444701] pci 0000:02:03.0: BAR 13: assigned [io 0x5000-0x5fff]
779[ 4.451001] pci 0000:02:04.0: BAR 13: assigned [io 0x6000-0x6fff]
780[ 4.457224] pci 0000:03:00.0: BAR 14: assigned [mem 0x1b41000000-0x1b413fffff]
781[ 4.464393] pci 0000:03:00.0: BAR 15: assigned [mem 0x1800000000-0x18001fffff 64bit pref]
782[ 4.472639] pci 0000:03:00.0: BAR 0: assigned [mem 0x1b41400000-0x1b4143ffff]
783[ 4.479924] pci 0000:03:00.0: BAR 13: assigned [io 0x1000-0x1fff]
784[ 4.485998] pci 0000:04:00.0: BAR 14: assigned [mem 0x1b41000000-0x1b413fffff]
785[ 4.493179] pci 0000:04:00.0: BAR 15: assigned [mem 0x1800000000-0x18001fffff 64bit pref]
786[ 4.501489] pci 0000:04:00.0: BAR 13: assigned [io 0x1000-0x1fff]
787[ 4.507696] pci 0000:05:00.0: BAR 14: assigned [mem 0x1b41000000-0x1b412fffff]
788[ 4.514964] pci 0000:05:00.0: BAR 0: assigned [mem 0x1b41300000-0x1b4133ffff]
789[ 4.522266] pci 0000:06:0c.0: BAR 14: assigned [mem 0x1b41000000-0x1b411fffff]
790[ 4.529491] pci 0000:06:10.0: BAR 14: assigned [mem 0x1b41200000-0x1b412fffff]
791[ 4.536743] pci 0000:06:04.0: PCI bridge to [bus 07]
792[ 4.541690] pci 0000:06:08.0: PCI bridge to [bus 08]
793[ 4.546516] pci 0000:09:00.0: BAR 14: assigned [mem 0x1b41000000-0x1b411fffff]
794[ 4.553633] pci 0000:0a:01.0: BAR 14: assigned [mem 0x1b41000000-0x1b410fffff]
795[ 4.560902] pci 0000:0a:02.0: BAR 14: assigned [mem 0x1b41100000-0x1b411fffff]
796[ 4.568072] pci 0000:0b:00.0: BAR 0: assigned [mem 0x1b41000000-0x1b41007fff 64bit]
797[ 4.575977] pci 0000:0a:01.0: PCI bridge to [bus 0b]
798[ 4.580886] pci 0000:0a:01.0: bridge window [mem 0x1b41000000-0x1b410fffff]
799[ 4.588210] pci 0000:0c:00.0: BAR 0: assigned [mem 0x1b41100000-0x1b41107fff 64bit]
800[ 4.595856] pci 0000:0a:02.0: PCI bridge to [bus 0c]
801[ 4.600749] pci 0000:0a:02.0: bridge window [mem 0x1b41100000-0x1b411fffff]
802[ 4.608066] pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
803[ 4.613262] pci 0000:09:00.0: bridge window [mem 0x1b41000000-0x1b411fffff]
804[ 4.620566] pci 0000:06:0c.0: PCI bridge to [bus 09-0c]
805[ 4.625773] pci 0000:06:0c.0: bridge window [mem 0x1b41000000-0x1b411fffff]
806[ 4.633082] pci 0000:0d:00.0: BAR 0: assigned [mem 0x1b41200000-0x1b41207fff 64bit]
807[ 4.640884] pci 0000:06:10.0: PCI bridge to [bus 0d]
808[ 4.645637] pci 0000:06:10.0: bridge window [mem 0x1b41200000-0x1b412fffff]
809[ 4.653028] pci 0000:06:14.0: PCI bridge to [bus 0e]
810[ 4.657885] pci 0000:05:00.0: PCI bridge to [bus 06-0e]
811[ 4.662873] pci 0000:05:00.0: bridge window [mem 0x1b41000000-0x1b412fffff]
812[ 4.670269] pci 0000:04:00.0: PCI bridge to [bus 05-0e]
813[ 4.675268] pci 0000:04:00.0: bridge window [io 0x1000-0x1fff]
814[ 4.681596] pci 0000:04:00.0: bridge window [mem 0x1b41000000-0x1b413fffff]
815[ 4.688757] pci 0000:04:00.0: bridge window [mem 0x1800000000-0x18001fffff 64bit pref]
816[ 4.696923] pci 0000:03:00.0: PCI bridge to [bus 04-0e]
817[ 4.701957] pci 0000:03:00.0: bridge window [io 0x1000-0x1fff]
818[ 4.708108] pci 0000:03:00.0: bridge window [mem 0x1b41000000-0x1b413fffff]
819[ 4.715449] pci 0000:03:00.0: bridge window [mem 0x1800000000-0x18001fffff 64bit pref]
820[ 4.723436] pci 0000:02:00.0: PCI bridge to [bus 03-0e]
821[ 4.728645] pci 0000:02:00.0: bridge window [io 0x1000-0x2fff]
822[ 4.735083] pci 0000:02:00.0: bridge window [mem 0x1b41000000-0x1b414fffff]
823[ 4.742291] pci 0000:02:00.0: bridge window [mem 0x1800000000-0x18001fffff 64bit pref]
824[ 4.750364] pci 0000:02:01.0: PCI bridge to [bus 0f]
825[ 4.754894] pci 0000:02:01.0: bridge window [io 0x3000-0x3fff]
826[ 4.761334] pci 0000:02:01.0: bridge window [mem 0x1b41500000-0x1b416fffff]
827[ 4.768724] pci 0000:02:01.0: bridge window [mem 0x1800200000-0x18003fffff 64bit pref]
828[ 4.776810] pci 0000:10:00.0: BAR 4: assigned [mem 0x1b40400000-0x1b407fffff 64bit]
829[ 4.784317] pci 0000:10:00.0: BAR 6: assigned [mem 0x1b40800000-0x1b4083ffff pref]
830[ 4.791827] pci 0000:10:00.0: BAR 0: assigned [mem 0x1b40840000-0x1b4084ffff 64bit]
831[ 4.799837] pci 0000:10:00.0: BAR 2: assigned [mem 0x1b40850000-0x1b40850fff 64bit]
832[ 4.807494] pci 0000:02:02.0: PCI bridge to [bus 10]
833[ 4.812210] pci 0000:02:02.0: bridge window [io 0x4000-0x4fff]
834[ 4.818642] pci 0000:02:02.0: bridge window [mem 0x1b40400000-0x1b409fffff]
835[ 4.826028] pci 0000:02:02.0: bridge window [mem 0x1800400000-0x18005fffff 64bit pref]
836[ 4.834124] pci 0000:11:00.0: BAR 2: assigned [mem 0x1b41700000-0x1b4173ffff 64bit]
837[ 4.841629] pci 0000:11:00.0: BAR 0: assigned [mem 0x1b41740000-0x1b4175ffff 64bit]
838[ 4.849512] pci 0000:11:00.0: BAR 6: assigned [mem 0x1b41760000-0x1b4176ffff pref]
839[ 4.856819] pci 0000:02:03.0: PCI bridge to [bus 11]
840[ 4.861819] pci 0000:02:03.0: bridge window [io 0x5000-0x5fff]
841[ 4.868086] pci 0000:02:03.0: bridge window [mem 0x1b41700000-0x1b418fffff]
842[ 4.875290] pci 0000:02:03.0: bridge window [mem 0x1800600000-0x18007fffff 64bit pref]
843[ 4.883562] pci 0000:12:00.0: BAR 4: assigned [mem 0x1b40c00000-0x1b40ffffff 64bit]
844[ 4.891055] pci 0000:12:00.0: BAR 6: assigned [mem 0x1b40a00000-0x1b40a3ffff pref]
845[ 4.898401] pci 0000:12:00.0: BAR 0: assigned [mem 0x1b40a40000-0x1b40a4ffff 64bit]
846[ 4.906375] pci 0000:12:00.0: BAR 2: assigned [mem 0x1b40a50000-0x1b40a50fff 64bit]
847[ 4.914063] pci 0000:02:04.0: PCI bridge to [bus 12]
848[ 4.918782] pci 0000:02:04.0: bridge window [io 0x6000-0x6fff]
849[ 4.925216] pci 0000:02:04.0: bridge window [mem 0x1b40a00000-0x1b40ffffff]
850[ 4.932606] pci 0000:02:04.0: bridge window [mem 0x1800800000-0x18009fffff 64bit pref]
851[ 4.940682] pci 0000:01:00.0: PCI bridge to [bus 02-12]
852[ 4.945468] pci 0000:01:00.0: bridge window [io 0x1000-0x6fff]
853[ 4.951843] pci 0000:01:00.0: bridge window [mem 0x1b40400000-0x1b419fffff]
854[ 4.959092] pci 0000:01:00.0: bridge window [mem 0x1800000000-0x18009fffff 64bit pref]
855[ 4.967325] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
856[ 4.972335] pci 0000:00:00.0: bridge window [io 0x1000-0x6fff]
857[ 4.978442] pci 0000:00:00.0: bridge window [mem 0x1b40000000-0x1b41bfffff]
858[ 4.985616] pci 0000:00:00.0: bridge window [mem 0x1800000000-0x18009fffff 64bit pref]
859[ 4.993598] pci 0000:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512
860[ 5.002141] pci 0000:01:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 128
861[ 5.010805] pci 0000:02:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 128
862[ 5.019289] pci 0000:03:00.0: Max Payload Size set to 128/2048 (was 128), Max Read Rq 128
863[ 5.027806] pci 0000:04:00.0: Max Payload Size set to 128/2048 (was 128), Max Read Rq 128
864[ 5.036461] pci 0000:05:00.0: Max Payload Size set to 128/2048 (was 128), Max Read Rq 128
865[ 5.044927] pci 0000:06:04.0: Max Payload Size set to 128/2048 (was 128), Max Read Rq 128
866[ 5.053428] pci 0000:06:08.0: Max Payload Size set to 128/2048 (was 128), Max Read Rq 128
867[ 5.062077] pci 0000:06:0c.0: Max Payload Size set to 128/2048 (was 128), Max Read Rq 128
868[ 5.070564] pci 0000:09:00.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
869[ 5.079052] pci 0000:0a:01.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
870[ 5.087550] pci 0000:0b:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512
871[ 5.096034] pci 0000:0a:02.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
872[ 5.104517] pci 0000:0c:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512
873[ 5.113001] pci 0000:06:10.0: Max Payload Size set to 128/2048 (was 128), Max Read Rq 128
874[ 5.121490] pci 0000:0d:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512
875[ 5.129975] pci 0000:06:14.0: Max Payload Size set to 128/2048 (was 128), Max Read Rq 128
876[ 5.138465] pci 0000:02:01.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 128
877[ 5.146952] pci 0000:02:02.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 128
878[ 5.155439] pci 0000:10:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512
879[ 5.163933] pci 0000:02:03.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 128
880[ 5.172415] pci 0000:11:00.0: Max Payload Size set to 128/4096 (was 128), Max Read Rq 512
881[ 5.180903] pci 0000:02:04.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 128
882[ 5.189392] pci 0000:12:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512
883[ 5.197878] pci 0000:01:00.1: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512
884[ 5.206540] iommu: Adding device 0000:00:00.0 to group 25
885[ 5.212203] pcieport 0000:00:00.0: Signaling PME with IRQ 29
886[ 5.219446] pcieport 0000:00:00.0: AER enabled with IRQ 29
887[ 5.223169] iommu: Adding device 0000:01:00.0 to group 25
888[ 5.228335] pcieport 0000:01:00.0: enabling device (0000 -> 0003)
889[ 5.236755] iommu: Adding device 0000:02:00.0 to group 25
890[ 5.239836] pcieport 0000:02:00.0: enabling device (0000 -> 0003)
891[ 5.248588] iommu: Adding device 0000:02:01.0 to group 25
892[ 5.251433] pcieport 0000:02:01.0: enabling device (0000 -> 0003)
893[ 5.260050] iommu: Adding device 0000:02:02.0 to group 25
894[ 5.263067] pcieport 0000:02:02.0: enabling device (0000 -> 0003)
895[ 5.271617] iommu: Adding device 0000:02:03.0 to group 25
896[ 5.274528] pcieport 0000:02:03.0: enabling device (0000 -> 0003)
897[ 5.283160] iommu: Adding device 0000:02:04.0 to group 25
898[ 5.286167] pcieport 0000:02:04.0: enabling device (0000 -> 0003)
899[ 5.294884] iommu: Adding device 0000:03:00.0 to group 25
900[ 5.297930] pcieport 0000:03:00.0: enabling device (0000 -> 0003)
901[ 5.306431] iommu: Adding device 0000:04:00.0 to group 25
902[ 5.309478] pcieport 0000:04:00.0: enabling device (0000 -> 0003)
903[ 5.318197] iommu: Adding device 0000:05:00.0 to group 25
904[ 5.321042] pcieport 0000:05:00.0: enabling device (0000 -> 0002)
905[ 5.329566] iommu: Adding device 0000:06:04.0 to group 25
906[ 5.335033] iommu: Adding device 0000:06:08.0 to group 25
907[ 5.340405] iommu: Adding device 0000:06:0c.0 to group 25
908[ 5.343337] pcieport 0000:06:0c.0: enabling device (0000 -> 0002)
909[ 5.351854] iommu: Adding device 0000:06:10.0 to group 25
910[ 5.354885] pcieport 0000:06:10.0: enabling device (0000 -> 0002)
911[ 5.363381] iommu: Adding device 0000:06:14.0 to group 25
912[ 5.368951] iommu: Adding device 0000:09:00.0 to group 25
913[ 5.371811] pcieport 0000:09:00.0: enabling device (0000 -> 0002)
914[ 5.379786] iommu: Adding device 0000:0a:01.0 to group 25
915[ 5.383351] pcieport 0000:0a:01.0: enabling device (0000 -> 0002)
916[ 5.391592] iommu: Adding device 0000:0a:02.0 to group 25
917[ 5.394879] pcieport 0000:0a:02.0: enabling device (0000 -> 0002)
918[ 5.402928] pci 0000:0b:00.0: enabling device (0000 -> 0002)
919[ 5.407032] iommu: Adding device 0000:0b:00.0 to group 25
920[ 5.412352] xhci_hcd 0000:0b:00.0: xHCI Host Controller
921[ 7.059939] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3
922[ 7.119350] xhci_hcd 0000:0b:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010
923[ 7.119776] xhci_hcd 0000:0b:00.0: irq 29, io mem 0x1b41000000
924[ 7.121314] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
925[ 7.121442] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
926[ 7.121559] usb usb3: Product: xHCI Host Controller
927[ 7.121648] usb usb3: Manufacturer: Linux 4.14.134-rt63-tegra xhci-hcd
928[ 7.121753] usb usb3: SerialNumber: 0000:0b:00.0
929[ 7.122179] hub 3-0:1.0: USB hub found
930[ 7.122268] hub 3-0:1.0: 2 ports detected
931[ 7.122590] xhci_hcd 0000:0b:00.0: xHCI Host Controller
932[ 7.122691] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
933[ 7.122815] xhci_hcd 0000:0b:00.0: Host supports USB 3.1 Enhanced SuperSpeed
934[ 7.123033] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
935[ 7.123260] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
936[ 7.123386] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
937[ 7.123502] usb usb4: Product: xHCI Host Controller
938[ 7.128050] usb usb4: Manufacturer: Linux 4.14.134-rt63-tegra xhci-hcd
939[ 7.134526] usb usb4: SerialNumber: 0000:0b:00.0
940[ 7.139563] hub 4-0:1.0: USB hub found
941[ 7.143119] hub 4-0:1.0: 2 ports detected
942[ 7.147543] pci 0000:0c:00.0: enabling device (0000 -> 0002)
943[ 7.153142] iommu: Adding device 0000:0c:00.0 to group 25
944[ 7.158481] xhci_hcd 0000:0c:00.0: xHCI Host Controller
945[ 7.163323] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 5
946[ 7.164085] usb usb2: usb_suspend_both: status 0
947[ 7.223879] usb usb3: usb_suspend_both: status 0
948[ 7.234978] xhci_hcd 0000:0c:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010
949[ 7.235345] xhci_hcd 0000:0c:00.0: irq 29, io mem 0x1b41100000
950[ 7.236828] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
951[ 7.236970] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
952[ 7.237086] usb usb5: Product: xHCI Host Controller
953[ 7.237168] usb usb5: Manufacturer: Linux 4.14.134-rt63-tegra xhci-hcd
954[ 7.237276] usb usb5: SerialNumber: 0000:0c:00.0
955[ 7.237689] hub 5-0:1.0: USB hub found
956[ 7.237807] hub 5-0:1.0: 2 ports detected
957[ 7.238209] xhci_hcd 0000:0c:00.0: xHCI Host Controller
958[ 7.238306] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 6
959[ 7.246003] xhci_hcd 0000:0c:00.0: Host supports USB 3.1 Enhanced SuperSpeed
960[ 7.251941] usb usb4: usb_suspend_both: status 0
961[ 7.257850] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
962[ 7.265804] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
963[ 7.272514] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
964[ 7.279774] usb usb6: Product: xHCI Host Controller
965[ 7.284674] usb usb6: Manufacturer: Linux 4.14.134-rt63-tegra xhci-hcd
966[ 7.291239] usb usb6: SerialNumber: 0000:0c:00.0
967[ 7.296044] hub 6-0:1.0: USB hub found
968[ 7.299486] hub 6-0:1.0: 2 ports detected
969[ 7.304104] pci 0000:0d:00.0: enabling device (0000 -> 0002)
970[ 7.309821] iommu: Adding device 0000:0d:00.0 to group 25
971[ 7.315016] xhci_hcd 0000:0d:00.0: xHCI Host Controller
972[ 7.320036] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7
973[ 7.339889] usb usb5: usb_suspend_both: status 0
974[ 7.382887] xhci_hcd 0000:0d:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
975[ 7.383227] xhci_hcd 0000:0d:00.0: irq 29, io mem 0x1b41200000
976[ 7.384635] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
977[ 7.384762] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
978[ 7.384877] usb usb7: Product: xHCI Host Controller
979[ 7.384959] usb usb7: Manufacturer: Linux 4.14.134-rt63-tegra xhci-hcd
980[ 7.385064] usb usb7: SerialNumber: 0000:0d:00.0
981[ 7.385369] hub 7-0:1.0: USB hub found
982[ 7.385482] hub 7-0:1.0: 2 ports detected
983[ 7.385911] xhci_hcd 0000:0d:00.0: xHCI Host Controller
984[ 7.390558] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 8
985[ 7.397991] xhci_hcd 0000:0d:00.0: Host supports USB 3.1 Enhanced SuperSpeed
986[ 7.405054] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
987[ 7.407899] usb usb6: usb_suspend_both: status 0
988[ 7.417779] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
989[ 7.424501] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
990[ 7.431775] usb usb8: Product: xHCI Host Controller
991[ 7.436662] usb usb8: Manufacturer: Linux 4.14.134-rt63-tegra xhci-hcd
992[ 7.443226] usb usb8: SerialNumber: 0000:0d:00.0
993[ 7.448003] hub 8-0:1.0: USB hub found
994[ 7.451483] hub 8-0:1.0: 2 ports detected
995[ 7.456797] iommu: Adding device 14100000.pcie to group 26
996[ 7.461482] tegra-pcie-dw 14100000.pcie: Setting init speed to max speed
997[ 7.468867] OF: PCI: host bridge /pcie@14100000 ranges:
998[ 7.473074] OF: PCI: IO 0x30100000..0x301fffff -> 0x30100000
999[ 7.479105] OF: PCI: MEM 0x1200000000..0x122fffffff -> 0x1200000000
1000[ 7.485578] OF: PCI: MEM 0x1230000000..0x123fffffff -> 0x40000000
1001[ 7.487877] usb usb7: usb_suspend_both: status 0
1002[ 7.559917] usb usb8: usb_suspend_both: status 0
1003[ 8.010326] tegra-pcie-dw 14100000.pcie: link is down
1004[ 8.010514] tegra-pcie-dw 14100000.pcie: PCI host bridge to bus 0001:00
1005[ 8.010648] pci_bus 0001:00: root bus resource [bus 00-ff]
1006[ 8.010748] pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x30100000-0x301fffff])
1007[ 8.010905] pci_bus 0001:00: root bus resource [mem 0x1200000000-0x122fffffff pref]
1008[ 8.011031] pci_bus 0001:00: root bus resource [mem 0x1230000000-0x123fffffff] (bus address [0x40000000-0x4fffffff])
1009[ 8.011282] pci 0001:00:00.0: [10de:1ad2] type 01 class 0x060400
1010[ 8.011468] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
1011[ 8.011792] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
1012[ 8.011899] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
1013[ 8.012192] iommu: Adding device 0001:00:00.0 to group 26
1014[ 8.012563] pcieport 0001:00:00.0: Signaling PME with IRQ 31
1015[ 8.012850] pcieport 0001:00:00.0: AER enabled with IRQ 31
1016[ 8.013401] iommu: Adding device 14160000.pcie to group 27
1017[ 8.013828] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed
1018[ 8.015038] OF: PCI: host bridge /pcie@14160000 ranges:
1019[ 8.015149] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000
1020[ 8.018275] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000
1021[ 8.024658] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000
1022[ 8.139764] tegra-pcie-dw 14160000.pcie: link is up
1023[ 8.140000] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00
1024[ 8.140116] pci_bus 0004:00: root bus resource [bus 00-ff]
1025[ 8.140212] pci_bus 0004:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x36100000-0x361fffff])
1026[ 8.140376] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref]
1027[ 8.140502] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff])
1028[ 8.140688] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400
1029[ 8.140857] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold
1030[ 8.141121] pci 0004:01:00.0: [1d6a:07b1] type 00 class 0x020000
1031[ 8.141245] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
1032[ 8.141301] pci 0004:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
1033[ 8.141352] pci 0004:01:00.0: reg 0x20: [mem 0x00000000-0x003fffff 64bit]
1034[ 8.141382] pci 0004:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
1035[ 8.141414] pci 0004:01:00.0: enabling Extended Tags
1036[ 8.141751] pci 0004:01:00.0: supports D1 D2
1037[ 8.141757] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot
1038[ 8.142766] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17405fffff]
1039[ 8.142896] pci 0004:01:00.0: BAR 4: assigned [mem 0x1740000000-0x17403fffff 64bit]
1040[ 8.143072] pci 0004:01:00.0: BAR 6: assigned [mem 0x1740400000-0x174043ffff pref]
1041[ 8.143234] pci 0004:01:00.0: BAR 0: assigned [mem 0x1740440000-0x174044ffff 64bit]
1042[ 8.143408] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740450000-0x1740450fff 64bit]
1043[ 8.143579] pci 0004:00:00.0: PCI bridge to [bus 01-ff]
1044[ 8.143684] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17405fffff]
1045[ 8.149373] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512
1046[ 8.157878] pci 0004:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
1047[ 8.166480] iommu: Adding device 0004:00:00.0 to group 27
1048[ 8.172134] pcieport 0004:00:00.0: Signaling PME with IRQ 33
1049[ 8.177772] pcieport 0004:00:00.0: AER enabled with IRQ 33
1050[ 8.197586] tegra-cbb 14040000.cv-noc: secure_irq = 99, nonsecure_irq = 98>
1051[ 8.201444] tegra194-isp5 14800000.isp: initialized
1052[ 8.211974] tegra194-vi5 15c10000.vi: initialized
1053[ 8.218201] tegra-xudc 3550000.xudc: device count: 1
1054[ 8.219179] tegra-xudc 3550000.xudc: vbus state: 0
1055[ 8.220184] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000
1056[ 8.220684] tegra-xudc 3550000.xudc: entering ELPG
1057[ 8.222663] tegra-xudc 3550000.xudc: entering ELPG done
1058[ 8.228087] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfedffff size=131072
1059[ 8.236175] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900
1060[ 8.247149] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00
1061[ 8.258033] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00
1062[ 8.269262] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00
1063[ 8.281074] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000
1064[ 8.293697] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (66)
1065[ 8.299953] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful
1066[ 8.308741] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=74151933d3c0df7f58e302326cbf1dc663afb09d
1067[ 8.348615] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:40 UTC (946688440)
1068[ 8.349886] hvc_sysfs: hypervisor is not present
1069[ 8.357633] Freeing unused kernel memory: 7296K
1070[ 8.372735] INITRAMFS STARTS
1071[ 8.569929] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
1072[ 8.652276] Trying chroot to /new_root
1073[ 8.652489] INITRAMFS END
1074[ 8.750218] systemd[1]: System time before build time, advancing clock.
1075[ 8.779700] ip_tables: (C) 2000-2006 Netfilter Core Team
1076[ 8.789658] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
1077[ 8.790867] systemd[1]: Detected architecture arm64.
1078[ 8.798214] systemd[1]: Set hostname to <tegra-ubuntu>.
1079[ 8.859653] systemd-gpt-auto-generator[550]: Failed to dissect: Input/output error
1080[ 8.880289] systemd[544]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
1081[ 8.904797] systemd[1]: File /lib/systemd/system/systemd-udevd.service:34 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
1082[ 8.905097] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
1083[ 9.015289] random: systemd: uninitialized urandom read (16 bytes read)
1084[ 9.015461] systemd[1]: Reached target Swap.
1085[ 9.016488] random: systemd: uninitialized urandom read (16 bytes read)
1086[ 9.016816] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
1087[ 9.017515] random: systemd: uninitialized urandom read (16 bytes read)
1088[ 9.018454] systemd[1]: Created slice User and Session Slice.
1089[ 9.019629] systemd[1]: Created slice System Slice.
1090[ 9.723107] OPE platform probe
1091[ 9.723416] OPE platform probe successful
1092[ 9.815006] tegra210-adsp aconnect@2a41000:adsp_audio: Adding to tegra-iommu group 2
1093[ 9.817804] iommu: Adding device aconnect@2a41000:adsp_audio to group 18
1094[ 9.821693] tegra210_adsp_audio_platform_probe: platform probe started
1095[ 9.824059] tegra210-adsp tegra210-adsp: Default param-type to BYTE for wire
1096[ 9.824200] tegra210-adsp tegra210-adsp: adma channel page address dt entry not found
1097[ 9.824342] tegra210-adsp tegra210-adsp: using adma channel page 0
1098[ 9.824633] nvadsp 2993000.adsp: ADSP OS firmware already loaded
1099[ 9.948354] tegra210-adsp tegra210-adsp: Loaded app reverb
1100[ 9.948475] tegra210-adsp tegra210-adsp: Loaded app wire
1101[ 9.948567] tegra210-adsp tegra210-adsp: Loaded app apm
1102[ 9.948653] tegra210-adsp tegra210-adsp: Loaded app adma
1103[ 9.948763] tegra210-adsp tegra210-adsp: Loaded app adma_tx
1104[ 9.948858] nvadsp_set_adma_dump_reg: callback for adma reg dump is sent to ffffff8008739dd8
1105[ 9.964556] tegra210-adsp tegra210-adsp: Tegra210 ADSP driver successfully registered
1106[ 9.985970] systemd-journald[583]: Received request to flush runtime journal from PID 1
1107[ 9.996054] systemd-journald[583]: File /var/log/journal/84f83b1f370a429f8c42c0c7317a9407/system.journal corrupted or uncleanly shut down, renaming and replacing.
1108[ 10.275677] tegra186-snd-p2382 sound_ref: Adding to tegra-iommu group 2
1109[ 10.277820] iommu: Adding device sound_ref to group 18
1110[ 10.499968] tegra186-snd-p2382 sound_ref: ADMAIF1 <-> ADMAIF1 mapping ok
1111[ 10.514238] tegra186-snd-p2382 sound_ref: ADMAIF2 <-> ADMAIF2 mapping ok
1112[ 10.527300] tegra186-snd-p2382 sound_ref: ADMAIF3 <-> ADMAIF3 mapping ok
1113[ 10.541461] tegra186-snd-p2382 sound_ref: ADMAIF4 <-> ADMAIF4 mapping ok
1114[ 10.554400] tegra186-snd-p2382 sound_ref: ADMAIF5 <-> ADMAIF5 mapping ok
1115[ 10.566973] tegra186-snd-p2382 sound_ref: ADMAIF6 <-> ADMAIF6 mapping ok
1116[ 10.580133] tegra186-snd-p2382 sound_ref: ADMAIF7 <-> ADMAIF7 mapping ok
1117[ 10.593078] tegra186-snd-p2382 sound_ref: ADMAIF8 <-> ADMAIF8 mapping ok
1118[ 10.605381] tegra186-snd-p2382 sound_ref: ADMAIF9 <-> ADMAIF9 mapping ok
1119[ 10.618747] tegra186-snd-p2382 sound_ref: ADMAIF10 <-> ADMAIF10 mapping ok
1120[ 10.631949] tegra186-snd-p2382 sound_ref: ADMAIF11 <-> ADMAIF11 mapping ok
1121[ 10.645881] tegra186-snd-p2382 sound_ref: ADMAIF12 <-> ADMAIF12 mapping ok
1122[ 10.659314] tegra186-snd-p2382 sound_ref: ADMAIF13 <-> ADMAIF13 mapping ok
1123[ 10.672823] tegra186-snd-p2382 sound_ref: ADMAIF14 <-> ADMAIF14 mapping ok
1124[ 10.686745] tegra186-snd-p2382 sound_ref: ADMAIF15 <-> ADMAIF15 mapping ok
1125[ 10.701861] tegra186-snd-p2382 sound_ref: ADMAIF16 <-> ADMAIF16 mapping ok
1126[ 10.715015] tegra186-snd-p2382 sound_ref: ADMAIF17 <-> ADMAIF17 mapping ok
1127[ 10.728119] tegra186-snd-p2382 sound_ref: ADMAIF18 <-> ADMAIF18 mapping ok
1128[ 10.741562] tegra186-snd-p2382 sound_ref: ADMAIF19 <-> ADMAIF19 mapping ok
1129[ 10.754135] tegra186-snd-p2382 sound_ref: ADMAIF20 <-> ADMAIF20 mapping ok
1130[ 11.010207] tegra186-snd-p2382 sound_ref: ADSP-FE1 <-> ADSP PCM1 mapping ok
1131[ 11.010519] tegra186-snd-p2382 sound_ref: ADSP-FE2 <-> ADSP PCM2 mapping ok
1132[ 11.010672] compress asoc: ADSP-FE3 <-> ADSP COMPR1 mapping ok
1133[ 11.010801] compress asoc: ADSP-FE4 <-> ADSP COMPR2 mapping ok
1134[ 11.297028] usbcore: registered new interface driver rndis_host
1135[ 11.360176] iommu: Adding device 0000:10:00.0 to group 25
1136[ 11.360522] atlantic 0000:10:00.0: enabling device (0000 -> 0002)
1137[ 11.988566] iommu: Adding device 0000:12:00.0 to group 25
1138[ 11.992237] atlantic 0000:12:00.0: enabling device (0000 -> 0002)
1139[ 12.382851] iommu: Adding device 0000:01:00.1 to group 25
1140[ 12.386235] switchtec 0000:01:00.1: enabling device (0000 -> 0002)
1141[ 12.410151] switchtec switchtec0: Management device registered.
1142[ 12.416312] switchtec: loaded.
1143[ 12.567111] sd 0:0:0:0: [sda] 61743104 4096-byte logical blocks: (253 GB/236 GiB)
1144[ 12.567293] sd 0:0:0:0: [sda] Write Protect is off
1145[ 12.567299] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
1146[ 12.567626] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
1147[ 12.588657] sd 0:0:0:1: [sdb] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB)
1148[ 12.588832] sd 0:0:0:1: [sdb] Write Protect is off
1149[ 12.588836] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
1150[ 12.589165] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
1151[ 12.612696] sd 0:0:0:2: [sdc] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB)
1152[ 12.612894] sd 0:0:0:2: [sdc] Write Protect is off
1153[ 12.612899] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
1154[ 12.613244] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
1155[ 12.619489] iommu: Adding device 0004:01:00.0 to group 27
1156[ 12.621202] libata version 3.00 loaded.
1157[ 12.630013] atlantic 0004:01:00.0: enabling device (0000 -> 0002)
1158[ 12.656001] sd 0:0:0:0: [sda] Attached SCSI disk
1159[ 12.681495] sd 0:0:0:1: [sdb] Attached SCSI disk
1160[ 12.705069] sd 0:0:0:2: [sdc] Attached SCSI disk
1161[ 12.732641] atlantic 0000:10:00.0 enp16s0: renamed from eth1
1162[ 12.789976] iommu: Adding device 0000:11:00.0 to group 25
1163[ 12.793227] mvsas 0000:11:00.0: mvsas: driver version 0.8.16
1164[ 12.793413] mvsas 0000:11:00.0: enabling device (0000 -> 0002)
1165[ 12.795159] mvsas 0000:11:00.0: mvsas: PCI-E x4, Bandwidth Usage: 5.0 Gbps
1166[ 12.927516] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000
1167
1168[ 13.123060] iommu: Adding device 3210000.spi to group 1
1169[ 13.181026] iommu: Adding device 3270000.spi to group 1
1170[ 13.187895] iommu: Adding device 3230000.spi to group 1
1171[ 13.221057] nct1008_nct72 2-004c: starting parse dt
1172[ 13.221243] nct1008_nct72 2-004c: !!!Found deprecated property!!!
1173[ 13.221350] nct1008_nct72 2-004c: success parsing dt
1174[ 13.222053] nct1008_nct72 2-004c: success in enabling tmp451 VDD rail
1175[ 13.255004] nct1008_nct72 2-004c: LOC shutdown limit 190
1176[ 13.255639] nct1008_nct72 2-004c: EXT shutdown limit 109
1177[ 13.258803] iommu: Adding device 3300000.spi to group 1
1178[ 13.288540] nct1008_nct72 2-004c: initial LOC temp: 26000
1179[ 13.288938] nct1008_nct72 2-004c: initial EXT temp: 26000
1180[ 13.289579] nct1008_nct72 2-004c: hi_b:-12, lo_b:0
1181[ 13.299327] nct1008_nct72 2-004c: nct1008_probe: initialized
1182[ 13.687089] atlantic 0000:12:00.0 enp18s0: renamed from eth2
1183[ 13.923932] loop: module loaded
1184[ 14.766196] logitech-djreceiver 0003:046D:C52B.0004: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-3610000.xhci-2/input2
1185[ 14.841171] qspi_mtd spi6.0: s25fs512s SSG 8 0 1000 4000000
1186[ 14.841183] qspi_mtd spi6.0: s25fs512s (65536 Kbytes)
1187[ 14.841191] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x4000000 (64MiB) .erasesize = 0x00040000 (256KiB) .numeraseregions = 0
1188[ 14.903513] 1 ofpart partitions found on MTD device spi6.0
1189[ 14.903545] Creating 1 MTD partitions on "spi6.0":
1190[ 14.903557] 0x000000000000-0x000004000000 : "Whole_flash0"
1191[ 14.943802] atlantic 0004:01:00.0 enP4p1s0: renamed from eth1
1192[ 15.013455] qspi_mtd spi7.0: s25fs512s SSG 8 0 1000 4000000
1193[ 15.013468] qspi_mtd spi7.0: s25fs512s (65536 Kbytes)
1194[ 15.013478] qspi_mtd spi7.0: mtd .name = spi7.0, .size = 0x4000000 (64MiB) .erasesize = 0x00040000 (256KiB) .numeraseregions = 0
1195[ 15.017016] 1 ofpart partitions found on MTD device spi7.0
1196[ 15.017024] Creating 1 MTD partitions on "spi7.0":
1197[ 15.017054] 0x000000000000-0x000004000000 : "Whole_flash1"
1198[ 15.287352] CAN device driver interface
1199[ 15.329998] Message RAM Configuration
1200 | base addr |0x0c312000|
1201 | sidfc_flssa |0x00000000|
1202 | xidfc_flesa |0x00000040|
1203 | rxf0c_f0sa |0x000000c0|
1204 | rxf1c_f1sa |0x000009c0|
1205 | rxbc_rbsa |0x000009c0|
1206 | txefc_efsa |0x000009c0|
1207 | txbc_tbsa |0x00000a40|
1208 | tmc_tmsa |0x00000ec0|
1209 | mram size |0x00001000|
1210[ 15.330698] Release 3.2.0 from 19.12.2014
1211[ 15.396297] net can0: mttcan device registered (regs=ffffff800b015000, irq=64)
1212[ 15.400819] Message RAM Configuration
1213 | base addr |0x0c322000|
1214 | sidfc_flssa |0x00000000|
1215 | xidfc_flesa |0x00000040|
1216 | rxf0c_f0sa |0x000000c0|
1217 | rxf1c_f1sa |0x000009c0|
1218 | rxbc_rbsa |0x000009c0|
1219 | txefc_efsa |0x000009c0|
1220 | txbc_tbsa |0x00000a40|
1221 | tmc_tmsa |0x00000ec0|
1222 | mram size |0x00001000|
1223[ 15.401526] Release 3.2.0 from 19.12.2014
1224[ 15.461020] net can1: mttcan device registered (regs=ffffff800b04d000, irq=65)
1225[ 15.583990] isc-pwm isc_pwm_gen: isc_pwm_probeing...
1226[ 15.597493] isc-pwm isc_pwm_gen: isc_pwm_probe success to get PWM
1227[ 15.648628] isc-mgr isc-mgr.0: isc_mgr_probeing...
1228[ 15.649145] isc-mgr isc-mgr.0: isc_mgr_probe: success to get PWM
1229[ 15.649438] gpio tegra-gpio wake36 for gpio=125(P:5)
1230[ 15.666985] isc-mgr isc-mgr.1: isc_mgr_probeing...
1231[ 15.684845] isc-mgr isc-mgr.2: isc_mgr_probeing...
1232[ 15.702328] isc-mgr isc-mgr.3: isc_mgr_probeing...
1233[ 15.702678] gpio tegra-gpio wake40 for gpio=129(Q:1)
1234[ 15.764444] nvpps nvpps: nvpps_probe
1235[ 15.764557] nvpps nvpps: gpio_pin(258)
1236[ 15.764588] nvpps nvpps: gpio_to_irq(425)
1237[ 15.764594] (NULL device *): failed to set timestamp control
1238[ 15.764710] nvpps nvpps: tsc_res_ns(32)
1239[ 15.781283] nvpps nvpps: nvpps cdev(500:0)
1240[ 15.781298] gpio tegra-gpio-aon wake48 for gpio=10(BB:2)
1241[ 15.781426] nvpps nvpps0: Registered IRQ 425 for nvpps
1242[ 17.017003] input: Logitech K830 as /devices/3610000.xhci/usb1/1-2/1-2:1.2/0003:046D:C52B.0004/0003:046D:404C.0005/input/input1
1243[ 17.017469] logitech-hidpp-device 0003:046D:404C.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K830] on usb-3610000.xhci-2:1
1244[ 17.144379] bpmp: mounted debugfs mirror
1245[ 17.216331] nvgpu: 17000000.gv11b railgate_enable_store:296 [INFO] railgate is disabled.
1246[ 17.321324] [TRUSTY] [secure_storage] E> super_block_valid:155: bad magic, 0x2a493f02f32a8729
1247[ 17.321608] [TRUSTY] [secure_storage] E> super_block_valid:155: bad magic, 0x2a493f02f32a8729
1248[ 17.321612] [TRUSTY] [secure_storage] E> fs_init_from_super:305: clear requested, create empty
1249[ 19.327788] scsi host1: mvsas
1250[ 19.654141] IPv6: ADDRCONF(NETDEV_UP): enp18s0: link is not ready
1251[ 19.665890] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
1252[ 20.683776] eqos 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
1253[ 24.628293] IPv6: ADDRCONF(NETDEV_UP): enp16s0: link is not ready
1254[ 24.628406] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
1255[ 24.651473] 8021q: 802.1Q VLAN Support v1.8
1256[ 24.651521] 8021q: adding VLAN 0 to HW filter on device enp16s0
1257[ 24.651673] 8021q: adding VLAN 0 to HW filter on device enp18s0
1258[ 25.499148] tegradc 15200000.nvdisplay: blank - powerdown
1259[ 25.510247] tegradc 15200000.nvdisplay: unblank
1260[ 25.512987] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
1261[ 25.513139] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
1262[ 25.515318] Parent Clock set for DC pll_d
1263[ 25.520838] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m
1264[ 25.522227] tegradc 15200000.nvdisplay: hdmi: get RGB quant from EDID.
1265[ 25.522236] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID.
1266[ 25.526038] extcon-disp-state external-connection:disp-state: cable 46 state 1
1267[ 25.526041] Extcon AUX0(HDMI) enable
1268[ 25.526689] tegradc 15200000.nvdisplay: unblank
1269[ 25.526701] tegradc 15210000.nvdisplay: blank - powerdown
1270[ 25.526708] tegradc 15220000.nvdisplay: blank - powerdown
1271[ 25.526715] tegradc 15230000.nvdisplay: blank - powerdown
1272[ 27.608842] fuse init (API version 7.26)
1273[ 31.770737] mttcan c320000.mttcan can1: Bitrate set
1274[ 31.774160] mttcan_controller_config: ctrlmode 0
1275[ 31.774181] mttcan c320000.mttcan can1: Bitrate set
1276[ 31.795043] can: controller area network core (rev 20170425 abi 9)
1277[ 31.795328] NET: Registered protocol family 29
1278[ 31.807723] can: raw protocol (rev 20170425)
1279[ 341.617356] tegradc 15200000.nvdisplay: blank - powerdown
1280[ 341.672397] extcon-disp-state external-connection:disp-state: cable 46 state 0
1281[ 341.672402] Extcon AUX0(HDMI) disable
1282[ 341.695843] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd
1283[ 341.697662] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd