Y9rvLScV

1[root@localhost nemo]# dmesg
2[    0.000000] c0 Initializing cgroup subsys cpu
3[    0.000000] c0 Linux version 3.0.64-CM-gb758c834015-dirty (s2@edp17-IO-2310) (gcc version 4.8 (GCC) ) #10 SMP PREEMPT Sun Jan 26 01:08:49 UTC 2020
4[    0.000000] c0 CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387d
5[    0.000000] c0 CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
6[    0.000000] c0 Machine: SMDK4210
7[    0.000000] c0 Memory policy: ECC disabled, Data cache writealloc
8[    0.000000] c0 CPU EXYNOS4210 (id 0x43210211)
9[    0.000000] c0 exynos4_init_clocks: initializing clocks
10[    0.000000] c0 S3C24XX Clocks, Copyright 2004 Simtec Electronics
11[    0.000000] c0 s3c_register_clksrc: clock audiocdclk has no registers set
12[    0.000000] c0 audiocdclk: no parent clock specified
13[    0.000000] c0 s3c_register_clksrc: clock armclk has no registers set
14[    0.000000] c0 exynos4_setup_clocks: registering clocks
15[    0.000000] c0 exynos4_setup_clocks: xtal is 24000000
16[    0.000000] c0 EXYNOS4: PLL settings, A=800000000, M=800000000, E=180633605 V=300000000
17[    0.000000] c0 EXYNOS4: ARMCLK=800000000, DMC=400000000, ACLK200=200000000
18[    0.000000] c0 ACLK160=160000000, ACLK133=133333333, ACLK100=100000000
19[    0.000000] c0 uclk1: source is mout_mpll (6), rate is 200000000
20[    0.000000] c0 uclk1: source is mout_mpll (6), rate is 200000000
21[    0.000000] c0 uclk1: source is mout_mpll (6), rate is 100000000
22[    0.000000] c0 uclk1: source is mout_mpll (6), rate is 100000000
23[    0.000000] c0 sclk_csis: source is xusbxti (1), rate is 24000000
24[    0.000000] c0 sclk_csis: source is xusbxti (1), rate is 24000000
25[    0.000000] c0 sclk_cam0: source is xusbxti (1), rate is 24000000
26[    0.000000] c0 sclk_cam1: source is xusbxti (1), rate is 24000000
27[    0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
28[    0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
29[    0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
30[    0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 24000000
31[    0.000000] c0 sclk_fimd: source is mout_mpll (6), rate is 50000000
32[    0.000000] c0 sclk_fimd: source is xusbxti (1), rate is 24000000
33[    0.000000] c0 sclk_mdnie: source is mout_mpll (6), rate is 50000000
34[    0.000000] c0 sclk_mdnie: source is xusbxti (1), rate is 24000000
35[    0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 24000000
36[    0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 24000000
37[    0.000000] c0 sclk_mfc: source is mout_mfc0 (0), rate is 100000000
38[    0.000000] c0 sclk_g3d: source is mout_g3d0 (0), rate is 100000000
39[    0.000000] c0 sclk_pwi: source is xusbxti (1), rate is 12000000
40[    0.000000] c0 (sec_debug_set_upload_magic) 66262564
41[    0.000000] c0 (sec_debug_set_upload_cause) cafebabe
42[    0.000000] c0 On node 0 totalpages: 262144
43[    0.000000] c0 free_area_init_node: node 0, pgdat c0a3eac0, node_mem_map c0e33000
44[    0.000000] c0   Normal zone: 1600 pages used for memmap
45[    0.000000] c0   Normal zone: 0 pages reserved
46[    0.000000] c0   Normal zone: 203200 pages, LIFO batch:31
47[    0.000000] c0   HighMem zone: 448 pages used for memmap
48[    0.000000] c0   HighMem zone: 56896 pages, LIFO batch:15
49[    0.000000] c0 sec_debug_magic_init: success reserving magic code area
50[    0.000000] c0 PERCPU: Embedded 7 pages/cpu @c163b000 s7168 r8192 d13312 u32768
51[    0.000000] c0 pcpu-alloc: s7168 r8192 d13312 u32768 alloc=8*4096
52[    0.000000] c0 pcpu-alloc: [0] 0 [0] 1 
53[    0.000000] c0 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
54[    0.000000] c0 Kernel command line: loglevel=4 console=ram androidboot.serialno=0009bbe342393f sec_debug.enable=0 sec_debug.enable_user=0 c1_watchdog.sec_pet=5 sec_log=0x100000@0x4d900000 s3cfb.bootloaderfb=0x5ec00000 ld9040.get_lcdtype=0x2 consoleblank=0 lpj=3981312 vmalloc=144m
55[    0.000000] c0 sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:2090f4 sec_log_buf:fc200000 sec_log_size:1048576
56[    0.000000] c0 sec_log_save_old: saved old log at 1048576@c164a160
57[    0.000000] c0 sec_getlog_supply_kloginfo: 0xcd900000
58[    0.000000] c0 PID hash table entries: 4096 (order: 2, 16384 bytes)
59[    0.000000] c0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
60[    0.000000] c0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
61[    0.000000] c0 allocated 4194304 bytes of page_cgroup
62[    0.000000] c0 please try 'cgroup_disable=memory' option if you don't want memory cgroups
63[    0.000000] c0 Memory: 1024MB = 1024MB total
64[    0.000000] c0 Memory: 804020k/804020k available, 244556k reserved, 229376K highmem
65[    0.000000] c0 Virtual kernel memory layout:
66[    0.000000] c0     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
67[    0.000000] c0     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
68[    0.000000] c0     DMA     : 0xfea00000 - 0xffe00000   (  20 MB)
69[    0.000000] c0     vmalloc : 0xf2800000 - 0xfb000000   ( 136 MB)
70[    0.000000] c0     lowmem  : 0xc0000000 - 0xf2000000   ( 800 MB)
71[    0.000000] c0     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
72[    0.000000] c0     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
73[    0.000000] c0       .init : 0xc0008000 - 0xc00ff000   ( 988 kB)
74[    0.000000] c0       .text : 0xc00ff000 - 0xc0838000   (7396 kB)
75[    0.000000] c0       .data : 0xc0838000 - 0xc0a3f620   (2078 kB)
76[    0.000000] c0        .bss : 0xc0a3f644 - 0xc0e32168   (4043 kB)
77[    0.000000] c0 SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
78[    0.000000] c0 Preemptible hierarchical RCU implementation.
79[    0.000000] c0 NR_IRQS:493
80[    0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
81[    0.000000] c0 Console: colour dummy device 80x30
82[    0.000000] c0 Calibrating delay loop (skipped) preset value.. 1592.52 BogoMIPS (lpj=3981312)
83[    0.000000] c0 pid_max: default: 32768 minimum: 301
84[    0.000000] c0 Security Framework initialized
85[    0.000000] c0 SELinux:  Disabled at boot.
86[    0.000000] c0 Mount-cache hash table entries: 512
87[    0.000000] c0 Initializing cgroup subsys debug
88[    0.000000] c0 Initializing cgroup subsys cpuacct
89[    0.000000] c0 Initializing cgroup subsys memory
90[    0.000000] c0 Initializing cgroup subsys freezer
91[    0.000000] c0 Initializing cgroup subsys bfqio
92[    0.000000] c0 CPU: Testing write buffer coherency: ok
93[    0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
94[    0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
95[    0.000000] c0 L310 cache controller enabled
96[    0.000000] c0 l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B
97[    0.030000] c1 CPU1: Booted secondary processor
98[    0.030000] c1 CPU1: Booted secondary processor
99[    0.030000] c1 notifier_call_chain : NOTIFY BAD tick_notify
100[    0.040000] c0 Brought up 2 CPUs
101[    0.040000] c0 SMP: Total of 2 processors activated (3185.04 BogoMIPS).
102[    0.040000] c0 devtmpfs: initialized
103[    0.045000] c0 print_constraints: dummy: 
104[    0.045000] c0 NET: Registered protocol family 16
105[    0.050000] c0 universal_tsp_init touch : 356
106[    0.050000] c0 smdkc210_machine_init() register sii9234 driver
107[    0.050000] c0 Registered chained gpio int handler for interrupt 110.
108[    0.050000] c0 Registered interrupt support for gpio group 20.
109[    0.050000] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
110[    0.050000] c0 usb: smdkc210_usbgadget_init: default luns=0, new luns=2
111[    0.050000] c0 usb: smdkc210_usbgadget_init tune_mask=0x10380f, tune=0x10280b
112[    0.050000] c0 ld9040_fb_init :: lcdtype=2
113[    0.050000] c0 brcm_wlan_init: start
114[    0.050000] c0 brcm_init_wlan_mem: WIFI MEM Allocated
115[    0.060000] c0 exynos4_pmu_init: PMU supports 4210(71)
116[    0.060000] c0 S3C Power Management, Copyright 2004 Simtec Electronics
117[    0.060000] c0 EXYNOS4: Initializing architecture
118[    0.065000] c0 s3c-adc samsung-adc-v3: attached adc driver
119[    0.065000] c0 samsung-pd samsung-pd.0: power domain registered
120[    0.065000] c0 samsung-pd samsung-pd.1: power domain registered
121[    0.065000] c0 samsung-pd samsung-pd.2: power domain registered
122[    0.065000] c0 lcd0 disable skip only one time
123[    0.065000] c0 samsung-pd samsung-pd.3: power domain registered
124[    0.065000] c0 samsung-pd samsung-pd.5: power domain registered
125[    0.065000] c0 samsung-pd samsung-pd.4: power domain registered
126[    0.065000] c0 samsung-pd samsung-pd.6: power domain registered
127[    0.065000] c0 s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
128[    0.065000] c0 s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
129[    0.065000] c0 s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12
130[    0.065000] c0 s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16
131[    0.065000] c0 s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.
132[    0.065000] c0 s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.
133[    0.065000] c0 s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.
134[    0.065000] c0 s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.
135[    0.065000] c0 s5p-sysmmu s5p-sysmmu.9: Initialized for s5p-fimg2d.
136[    0.065000] c0 s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.
137[    0.065000] c0 s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.
138[    0.065000] c0 s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.
139[    0.090000] c0 bio: create slab <bio-0> at 0
140[    0.090000] c0 SCSI subsystem initialized
141[    0.090000] c0 usbcore: registered new interface driver usbfs
142[    0.090000] c0 usbcore: registered new interface driver hub
143[    0.090000] c0 usbcore: registered new device driver usb
144[    0.090000] c0 i2c-gpio i2c-gpio.8: using pins 91 (SDA) and 89 (SCL)
145[    0.090000] c0 i2c-gpio i2c-gpio.9: using pins 163 (SDA) and 164 (SCL)
146[    0.090000] c0 i2c-gpio i2c-gpio.11: using pins 99 (SDA) and 107 (SCL)
147[    0.095000] c0 i2c-gpio i2c-gpio.14: using pins 136 (SDA) and 135 (SCL)
148[    0.095000] c0 i2c-gpio i2c-gpio.12: using pins 31 (SDA) and 33 (SCL)
149[    0.095000] c0 i2c-gpio i2c-gpio.15: using pins 154 (SDA) and 156 (SCL)
150[    0.095000] c0 i2c-gpio i2c-gpio.16: using pins 18 (SDA) and 19 (SCL)
151[    0.095000] c0 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
152[    0.095000] c0 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
153[    0.095000] c0 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
154[    0.095000] c0 max8997 5-0066: max8997_irq_init: PMIC ID(0x77)
155[    0.100000] c0 max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck1: 1350000, i:28
156[    0.100000] c0 max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck2: 1150000, i:20
157[    0.100000] c0 max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck5: 1200000, i:22
158[    0.100000] c0 max8997-pmic max8997-pmic: RAMP REG(0xf9)
159[    0.100000] c0 print_constraints: VADC_3.3V_C210: 3300 mV 
160[    0.100000] c0 print_constraints: VUSB_1.1V: 1100 mV 
161[    0.100000] c0 print_constraints: VMIPI_1.8V: 1800 mV 
162[    0.100000] c0 print_constraints: VHSIC_1.2V: 1200 mV 
163[    0.105000] c0 print_constraints: CAM_ISP_1.8V: 1800 mV 
164[    0.105000] c0 print_constraints: VUSB_3.3V: 3300 mV 
165[    0.105000] c0 print_constraints: VPLL_1.1V: 1100 mV 
166[    0.105000] c0 print_constraints: TOUCH_2.8V: 2800 mV 
167[    0.105000] c0 print_constraints: VT_CAM_1.8V: 1800 mV 
168[    0.105000] c0 print_constraints: VCC_3.0V_LCD: 3000 mV 
169[    0.105000] c0 print_constraints: VCC_2.8V_MOTOR: 2800 mV 
170[    0.105000] c0 print_constraints: LED_A_2.8V: 2800 mV 
171[    0.105000] c0 print_constraints: CAM_SENSOR_IO_1.8V: 1800 mV 
172[    0.105000] c0 print_constraints: VTF_2.8V: 2800 mV 
173[    0.110000] c0 print_constraints: TOUCH_LED_3.3V: 3000 <--> 3300 mV at 3000 mV 
174[    0.110000] c0 print_constraints: VDDQ_M1M2_1.2V: 1200 mV 
175[    0.110000] c0 print_constraints: vdd_arm range: 650 <--> 2225 mV at 1350 mV 
176[    0.110000] c0 print_constraints: vdd_int range: 650 <--> 2225 mV at 1150 mV 
177[    0.110000] c0 print_constraints: G3D_1.1V: 900 <--> 1200 mV at 1000 mV 
178[    0.110000] c0 print_constraints: CAM_ISP_CORE_1.2V: 1200 mV 
179[    0.110000] c0 print_constraints: VMEM_1.2V: 1200 mV 
180[    0.110000] c0 print_constraints: VCC_SUB_2.0V: 2000 mV 
181[    0.110000] c0 print_constraints: safeout1 range: 
182[    0.110000] c0 print_constraints: safeout2 range: 
183[    0.115000] c0 print_constraints: FLASH_CUR: 23 <--> 750 mA at 23 mA 
184[    0.115000] c0 print_constraints: MOVIE_CUR: 15 <--> 250 mA at 15 mA 
185[    0.115000] c0 s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
186[    0.115000] c0 s3c-i2c s3c2440-i2c.6: i2c-6: S3C I2C adapter
187[    0.115000] c0 s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
188[    0.115000] c0 Advanced Linux Sound Architecture Driver Version 1.0.24.
189[    0.115000] c0 Bluetooth: Core ver 2.16
190[    0.115000] c0 NET: Registered protocol family 31
191[    0.115000] c0 Bluetooth: HCI device and connection manager initialized
192[    0.115000] c0 Bluetooth: HCI socket layer initialized
193[    0.115000] c0 Bluetooth: L2CAP socket layer initialized
194[    0.115000] c0 Bluetooth: SCO socket layer initialized
195[    0.115000] c0 cfg80211: Calling CRDA to update world regulatory domain
196[    0.115000] c0 Switching to clocksource mct-frc
197[    0.115314] c0 Switched to NOHz mode on CPU #0
198[    0.115443] c1 Switched to NOHz mode on CPU #1
199[    0.129283] c0 NET: Registered protocol family 2
200[    0.129519] c0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
201[    0.130341] c0 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
202[    0.132238] c0 TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
203[    0.133423] c0 TCP: Hash tables configured (established 131072 bind 65536)
204[    0.133459] c0 TCP reno registered
205[    0.133485] c0 UDP hash table entries: 512 (order: 2, 16384 bytes)
206[    0.133543] c0 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
207[    0.133951] c0 NET: Registered protocol family 1
208[    0.137590] c0 PMU: registered new PMU device of type 0
209[    0.138967] c0 MUIC:[../../../../../../kernel/samsung/i9100/arch/arm/mach-exynos/sec-switch_max8997.c] func:uart_switch_init
210[    0.139029] c0 ##MUIC [ ../../../../../../kernel/samsung/i9100/arch/arm/mach-exynos/sec-switch_max8997.c ]- func : uart_switch_init !! val:-0-
211[    0.139825] c0 regulator_consumer_probe: loading u1-regulator-consumer
212[    0.140519] c0 wake enabled for irq 374
213[    0.140728] c0 sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
214[    0.141080] c0 Loaded driver for PL330 DMAC-0 s3c-pl330
215[    0.141112] c0 	DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
216[    0.141249] c0 Loaded driver for PL330 DMAC-1 s3c-pl330
217[    0.141280] c0 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
218[    0.141412] c0 Loaded driver for PL330 DMAC-2 s3c-pl330
219[    0.141443] c0 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
220[    0.141938] c0 audit: initializing netlink socket (disabled)
221[    0.141995] c0 type=2000 audit(0.140:1): initialized
222[    0.142541] c0 highmem bounce pool size: 64 pages
223[    0.142838] c0 ashmem: initialized
224[    0.156107] c0 fuse init (API version 7.16)
225[    0.156590] c0 msgmni has been set to 1122
226[    0.156859] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
227[    0.156892] c1 FIPS: No test for cipher_null (cipher_null-generic)
228[    0.156977] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
229[    0.157009] c1 FIPS: No test for ecb(cipher_null) (ecb-cipher_null)
230[    0.157092] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
231[    0.157123] c1 FIPS: No test for digest_null (digest_null-generic)
232[    0.157205] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
233[    0.157237] c1 FIPS: No test for compress_null (compress_null-generic)
234[    0.157320] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
235[    0.157402] c1 FIPS: self-tests for non-FIPS md4-generic (md4) passed
236[    0.157533] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
237[    0.157600] c1 FIPS: self-tests for non-FIPS md5-generic (md5) passed
238[    0.157727] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
239[    0.157797] c1 FIPS: self-tests for sha1-generic (sha1) passed
240[    0.157923] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
241[    0.157985] c1 FIPS: self-tests for sha224-generic (sha224) passed
242[    0.158111] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
243[    0.158165] c1 FIPS: self-tests for sha256-generic (sha256) passed
244[    0.158292] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
245[    0.158506] c1 FIPS: self-tests for sha384-generic (sha384) passed
246[    0.158632] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
247[    0.158833] c1 FIPS: self-tests for sha512-generic (sha512) passed
248[    0.158942] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
249[    0.159002] c1 FIPS: self-tests for des-generic (des) passed
250[    0.159101] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
251[    0.159166] c1 FIPS: self-tests for des3_ede-generic (des3_ede) passed
252[    0.159291] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
253[    0.159323] c1 FIPS: self-tests for non-FIPS twofish-generic (twofish) passed
254[    0.159409] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
255[    0.159495] c1 FIPS: self-tests for aes-generic (aes) passed
256[    0.159622] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
257[    0.159654] c1 FIPS: self-tests for non-FIPS arc4-generic (arc4) passed
258[    0.159740] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
259[    0.160290] c1 FIPS: self-tests for non-FIPS deflate-generic (deflate) passed
260[    0.160420] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
261[    0.160506] c1 FIPS: self-tests for crc32c-generic (crc32c) passed
262[    0.160644] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
263[    0.160676] c1 FIPS: No test for stdrng (krng)
264[    0.160754] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
265[    0.193021] c1 FIPS: self-tests for ansi_cprng (stdrng) passed
266[    0.193133] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
267[    0.193165] c1 FIPS: No test for fips(ansi_cprng) (fips_ansi_cprng)
268[    0.193351] c0 FIPS: self-tests for non-FIPS md5 (md5) passed
269[    0.193495] c0 FIPS: self-tests for sha1 (sha1) passed
270[    0.193920] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
271[    0.193987] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
272[    0.194272] c0 FIPS: self-tests for ecb(des-generic) (ecb(des)) passed
273[    0.194840] c0 FIPS: self-tests for ecb(des) (ecb(des)) passed
274[    0.195298] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
275[    0.195416] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
276[    0.195851] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
277[    0.195991] c1 FIPS: self-tests for non-FIPS cbc(des-generic) (cbc(des)) passed
278[    0.196281] c0 FIPS: self-tests for non-FIPS cbc(des) (cbc(des)) passed
279[    0.196651] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
280[    0.196727] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
281[    0.196834] c0 FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
282[    0.197074] c0 FIPS: self-tests for ecb(des3_ede) (ecb(des3_ede)) passed
283[    0.197435] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
284[    0.197536] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
285[    0.197973] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
286[    0.198122] c0 FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
287[    0.198382] c0 FIPS: self-tests for cbc(des3_ede) (cbc(des3_ede)) passed
288[    0.198522] c0 FIPS: self-tests for non-FIPS md4 (md4) passed
289[    0.198646] c0 FIPS: self-tests for sha256 (sha256) passed
290[    0.199014] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
291[    0.199121] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
292[    0.199380] c0 FIPS: self-tests for non-FIPS ecb(twofish-generic) (ecb(twofish)) passed
293[    0.199864] c0 FIPS: self-tests for non-FIPS ecb(twofish) (ecb(twofish)) passed
294[    0.200276] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
295[    0.200377] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
296[    0.200814] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
297[    0.201087] c0 FIPS: self-tests for non-FIPS cbc(twofish-generic) (cbc(twofish)) passed
298[    0.201589] c0 FIPS: self-tests for non-FIPS cbc(twofish) (cbc(twofish)) passed
299[    0.201956] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
300[    0.202064] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
301[    0.202210] c0 FIPS: self-tests for ecb(aes-generic) (ecb(aes)) passed
302[    0.202470] c0 FIPS: self-tests for ecb(aes) (ecb(aes)) passed
303[    0.202840] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
304[    0.202947] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
305[    0.203382] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
306[    0.203558] c0 FIPS: self-tests for cbc(aes-generic) (cbc(aes)) passed
307[    0.203859] c0 FIPS: self-tests for cbc(aes) (cbc(aes)) passed
308[    0.204230] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
309[    0.204334] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
310[    0.204770] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
311[    0.204931] c0 FIPS: self-tests for ctr(aes-generic) (ctr(aes)) passed
312[    0.205226] c0 FIPS: self-tests for ctr(aes) (ctr(aes)) passed
313[    0.205593] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
314[    0.205708] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
315[    0.206149] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
316[    0.206690] c0 FIPS: self-tests for rfc3686(ctr(aes-generic)) (rfc3686(ctr(aes))) passed
317[    0.207728] c0 FIPS: self-tests for rfc3686(ctr(aes)) (rfc3686(ctr(aes))) passed
318[    0.208169] c0 FIPS: self-tests for sha384 (sha384) passed
319[    0.208576] c0 FIPS: self-tests for sha512 (sha512) passed
320[    0.209487] c0 FIPS: self-tests for non-FIPS deflate (deflate) passed
321[    0.209912] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
322[    0.210053] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
323[    0.210312] c0 FIPS: self-tests for non-FIPS ecb(arc4-generic) (ecb(arc4)) passed
324[    0.210782] c0 FIPS: self-tests for non-FIPS ecb(arc4) (ecb(arc4)) passed
325[    0.210968] c0 FIPS: self-tests for crc32c (crc32c) passed
326[    0.211093] c0 FIPS: self-tests for sha224 (sha224) passed
327[    0.211469] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
328[    0.211580] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
329[    0.212022] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
330[    0.212431] c0 FIPS: self-tests for non-FIPS cts(cbc(aes-generic)) (cts(cbc(aes))) passed
331[    0.213189] c0 FIPS: self-tests for non-FIPS cts(cbc(aes)) (cts(cbc(aes))) passed
332[    0.213562] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
333[    0.213666] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
334[    0.213850] c0 FIPS: self-tests for non-FIPS hmac(md5-generic) (hmac(md5)) passed
335[    0.214210] c0 FIPS: self-tests for non-FIPS hmac(md5) (hmac(md5)) passed
336[    0.214577] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
337[    0.214683] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
338[    0.214933] c0 FIPS: self-tests for hmac(sha1-generic) (hmac(sha1)) passed
339[    0.215580] c0 FIPS: self-tests for hmac(sha1) (hmac(sha1)) passed
340[    0.215950] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
341[    0.216060] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
342[    0.216436] c0 FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
343[    0.217176] c0 FIPS: self-tests for hmac(sha256) (hmac(sha256)) passed
344[    0.217542] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
345[    0.217652] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
346[    0.218413] c0 FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
347[    0.219929] c0 FIPS: self-tests for hmac(sha384) (hmac(sha384)) passed
348[    0.220397] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
349[    0.220504] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
350[    0.221260] c0 FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
351[    0.222777] c0 FIPS: self-tests for hmac(sha512) (hmac(sha512)) passed
352[    0.223152] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
353[    0.223256] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
354[    0.223481] c0 FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
355[    0.223938] c0 FIPS: self-tests for hmac(sha224) (hmac(sha224)) passed
356[    0.288798] c0 FIPS: self-tests for ansi_cprng (ansi_cprng) passed
357[    0.288833] c0 FIPS: do kernel integrity check
358[    0.410964] c0 FIPS: integrity check passed
359[    0.411163] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
360[    0.411269] c0 FIPS: self-tests for non-FIPS ghash-generic (ghash) passed
361[    0.411363] c0 io scheduler noop registered
362[    0.411393] c0 io scheduler deadline registered
363[    0.411522] c0 io scheduler cfq registered (default)
364[    0.411552] c0 io scheduler row registered
365[    0.411576] c0 io scheduler sio registered
366[    0.411946] c0 io scheduler bfq registered
367[    0.411973] c0 BFQ I/O-scheduler: v7r8
368[    0.412197] c0 s3cfb s3cfb.0: div(32) max should be 16
369[    0.412231] c0 s3cfb s3cfb.0: vclk=25067520, div=32(16), rate=50000000
370[    0.412311] c0 s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
371[    0.412573] c0 s3cfb s3cfb.0: [fb2] dma: 0x7143c000, cpu: 0xf28f9000, size: 0x002ee000
372[    0.414542] c0 sec_getlog_supply_fbinfo: 0x7143c000 480 800 32 2
373[    0.416703] c0 Bootloader sent 'bootloaderfb' : 5EC00000
374[    0.417822] c0 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
375[    0.417955] c0 s3cfb s3cfb.0: registered successfully
376[    0.418636] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
377[    0.418676] c0 mdnie mdnie: registered successfully
378[    0.419152] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
379[    0.495344] c0 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
380[    0.510077] c0 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
381[    0.525074] c0 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
382[    0.540070] c0 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
383[    0.555428] c0 Mali: exynos_result_of_asv_group = 0x0, target_asv = 0x0
384[    0.555472] c0 Mali: mali_dvfs[0].vol = 950000 
385[    0.555503] c0 Mali: mali_dvfs[1].vol = 950000 
386[    0.555529] c0 Mali: mali_runtime_resume.vol = 950000 
387[    0.555558] c0 Mali: mali_dvfs[2].vol = 1000000 
388[    0.555588] c0 Mali: init_gpu_vol = 1000000 
389[    0.555677] c0 Mali: Mali frequency 266
390[    0.555704] c0 Mali: init_mali_clock mali_clock c09a41ac
391[    0.556169] c0 Mali: = regulator_set_voltage: 1000000, 1000000 
392[    0.556635] c0 Mali: Mali frequency 200
393[    0.579650] c0 Mali: Mali device driver loaded
394[    0.580054] c0 UMP: UMP device driver 0000 loaded
395[    0.588416] c0 brd: module loaded
396[    0.592596] c0 loop: module loaded
397[    0.593289] c0 sec_jack_probe : Registering jack driver
398[    0.594441] c0 wake enabled for irq 378
399[    0.594976] c0 input: max8997-muic as /devices/platform/s3c2440-i2c.5/i2c-5/5-0066/max8997-muic/input/input0
400[    0.595062] c0 max8997_muic_cfg_uart_gpio: path=0
401[    0.595284] c0 max8997-muic max8997-muic: max8997_muic_set_adcdbset: ADCDBSET(0x20)
402[    0.596380] c0 Loading pn544 driver
403[    0.596439] c0 pn544_probe : IRQ num 367
404[    0.596670] c0 pn544_probe : requesting IRQ 367
405[    0.598339] c0 lcd panel: ld9040_probe : lcdtype : SM2_A2
406[    0.598371] c0 lcd panel: ld9040 panel driver has been probed.
407[    0.598559] c0 PPP generic driver version 2.4.2
408[    0.598932] c0 PPP Deflate Compression module registered
409[    0.598962] c0 PPP BSD Compression module registered
410[    0.599013] c0 PPP MPPE Compression module registered
411[    0.599042] c0 NET: Registered protocol family 24
412[    0.599071] c0 tun: Universal TUN/TAP device driver, 1.6
413[    0.599100] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
414[    0.599540] c0 host_notifier host_notifier.0: notifier_prove
415[    0.600240] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
416[    0.600604] c0 usbcore: registered new interface driver usblp
417[    0.600635] c0 Initializing USB Mass Storage driver...
418[    0.600799] c0 usbcore: registered new interface driver usb-storage
419[    0.600832] c0 USB Mass Storage support registered.
420[    0.600917] c0 otg pdata e40d2d80, irq c03daa04
421[    0.601213] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
422[    0.601250] c0 s3c-udc : version 15 March 2009
423[    0.601276] c0 init
424[    0.601814] c0 usb: android_bind disconnect
425[    0.601840] c0 usb: usb_gadget_disconnect
426[    0.603918] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=1
427[    0.604080] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
428[    0.604119] c0 android_usb gadget: Number of LUNs=2
429[    0.604149] c0  lun0: LUN: removable file: (no medium)
430[    0.604179] c0  lun1: LUN: removable file: (no medium)
431[    0.605009] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=2
432[    0.605073] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=3
433[    0.605114] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=4
434[    0.605150] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
435[    0.605182] c0 usb: composite_bind bcdDevice=0x0
436[    0.605209] c0 usb: composite_bind composite_manufacturer=
437[    0.605244] c0 android_usb gadget: android_usb ready
438[    0.605271] c0 usb: Skip udc_enable
439[    0.606387] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
440[    0.606679] c0 [keys]PWR 0
441[    0.607178] c0 input: sec_touchscreen as /devices/virtual/input/input2
442[    0.725522] c0 Atmel MXT224 3-004a: family = 0x81, variant = 0x1, version= 0x10, build = 170
443[    0.725568] c0 [TSP] family = 0x81, variant = 0x1, version = 0x10, build = 170
444[    0.734912] c0 [TSP] TSP chip is MXT224-E
445[    0.735174] c0 [TSP]user_info_value is 0
446[    0.810051] c0 [TSP] ta_status is 0
447[    0.810072] c0 [TSP] mxt224_ta_probe
448[    0.811598] c0 [TSP]TA_probe MXT224E T48 Byte2 is 66
449[    0.814188] c0 [TSP]TA_probe MXT224E T48 Byte2 is 98
450[    0.815143] c0 [TSP] calibration success!!!
451[    0.840056] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_wtsr: enable WTSR
452[    0.865054] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_smpl: enable SMPL
453[    0.890199] c0 max8997_rtc_enable_smpl: WTSR_SMPL(0xc3)
454[    0.891500] c0 using rtc device, max8997-rtc, for alarms
455[    0.891554] c0 max8997-rtc max8997-rtc: rtc core: registered max8997-rtc as rtc0
456[    0.891906] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
457[    0.892312] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
458[    0.892512] c0 i2c /dev entries driver
459[    0.895620] c0 lirc_dev: IR Remote Control driver registered, major 250 
460[    0.895657] c0 IR NEC protocol handler initialized
461[    0.895683] c0 IR RC5(x) protocol handler initialized
462[    0.895709] c0 IR RC6 protocol handler initialized
463[    0.895735] c0 IR JVC protocol handler initialized
464[    0.895760] c0 IR Sony protocol handler initialized
465[    0.895785] c0 IR RC5 (streamzap) protocol handler initialized
466[    0.895815] c0 IR LIRC bridge handler initialized
467[    0.895840] c0 Linux video capture interface: v2.00
468[    0.896142] c0 [S5K5BAFX] s5k5bafx_create_sysfs
469[    0.896618] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
470[    0.896684] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
471[    0.896861] c0 Initialize JPEG driver
472[    0.897343] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
473[    0.897616] c0 s5p_int_src_ext_hpd()
474[    0.897643] c0 s5p_hpd_read_gpio(0)
475[    0.897839] c0 s5p_hpd_read_gpio(0)
476[    0.898267] c0 i2c i2c-7: attached s5p_ddc into i2c adapter successfully
477[    0.898426] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
478[    0.898460] c0 i2c-core: driver [s5p_ddc] using legacy resume method
479[    0.898976] c0 MFC(Multi Function Codec - FIMV v5.x) registered successfully
480[    0.899895] c0 sii9234_cfg_gpio()
481[    0.899927] c0 Registered chained gpio int handler for interrupt 111.
482[    0.899974] c0 Registered interrupt support for gpio group 10.
483[    0.900010] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
484[    0.900248] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
485[    0.900349] c0 sii9234 : create mhl sysfile
486[    0.900969] c0 input: sii9234_rcp as /devices/virtual/input/input3
487[    0.901949] c0 max8997-charger max8997-charger: max8997_charger_probe : MAX8997 Charger Driver Loading
488[    0.903740] c0 max8922-charger max8922-charger: max8922_probe : MAX8922 Charger Driver Loading
489[    0.903855] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
490[    0.904250] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
491[    0.904561] c0 max17042 9-0036: max17042_probe: MAX17042 Driver Loading
492[    0.905539] c0 max17042 9-0036: max17042_probe : is enable (1)
493[    0.905573] c0 max17042 9-0036: max17042_init_regs
494[    0.906691] c0 max17042 9-0036: fuel alert soc (2)
495[    0.906718] c0 max17042 9-0036: max17042_alert_init
496[    0.908329] c0 wake enabled for irq 371
497[    0.909449] c0 max17042 9-0036: max17042_irq_init : config_reg(2314) irq(371)
498[    0.910118] c0 max17042 9-0036: MAX17042 Fuel-Gauge Ver 1460
499[    0.910165] c0 max17042 9-0036: max17042_probe: MAX17042 Driver Loaded
500[    0.912717] c0 max17042 9-0036: max17042_get_soc : soc(62e0)
501[    0.912749] c0 max17042_need_soc_recal: HW(0xe)
502[    0.912777] c0 max17042 9-0036: max17042_get_soc : use raw (98), soc (100)
503[    0.913429] c0 i2c-core: driver [max17042] using legacy suspend method
504[    0.913462] c0 i2c-core: driver [max17042] using legacy resume method
505[    0.914358] c0 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
506[    0.914436] c0 Bluetooth: HCI UART driver ver 2.2
507[    0.914465] c0 Bluetooth: HCI H4 protocol initialized
508[    0.914952] c0 cpuidle: using governor ladder
509[    0.915990] c0 cpuidle: using governor menu
510[    0.916142] c0 mshci: Mobile Storage Host Controller Interface driver
511[    0.916176] c0 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
512[    0.916344] c0 dw_mmc dw_mmc: clock source 0: sclk_dwmci (90316800 Hz)
513[    0.916617] c0 mmc0: Version ID 0x5342230a.
514[    0.916866] c0 mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
515[    0.917316] c0 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
516[    0.917581] c0 sdhci: Secure Digital Host Controller Interface driver
517[    0.917615] c0 sdhci: Copyright(c) Pierre Ossman
518[    0.917737] c0 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (8888888 Hz)
519[    0.917986] c0 mmc1: vtf_2.8v regulator found
520[    0.945365] c0 mmc0: cmd 52 response timeout error
521[    0.945739] c0 mmc0: cmd 52 response timeout error
522[    0.949305] c0 mmc0: cmd 8 response timeout error
523[    0.949673] c0 mmc0: cmd 5 response timeout error
524[    0.950017] c0 mmc0: cmd 5 response timeout error
525[    0.950378] c0 mmc0: cmd 5 response timeout error
526[    0.950721] c0 mmc0: cmd 5 response timeout error
527[    0.951092] c0 mmc0: cmd 55 response timeout error
528[    0.951461] c0 mmc0: cmd 55 response timeout error
529[    0.951829] c0 mmc0: cmd 55 response timeout error
530[    0.952197] c0 mmc0: cmd 55 response timeout error
531[    0.971792] c1 mmc0: VIS00M: 15010056495330304d09bbe342393f7d
532[    1.019833] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
533[    1.020072] c0 wake enabled for irq 380
534[    1.020096] c0 mmc1: card inserted.
535[    1.020185] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
536[    1.020261] c0 mmc2: no vmmc regulator found
537[    1.020531] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
538[    1.027082] c0 usbcore: registered new interface driver usbhid
539[    1.027114] c0 usbhid: USB HID core driver
540[    1.027730] c0 logger: created 2048K log 'log_main'
541[    1.027970] c0 logger: created 256K log 'log_events'
542[    1.028192] c0 logger: created 1024K log 'log_radio'
543[    1.028402] c0 logger: created 256K log 'log_system'
544[    1.028606] c0 logger: created 256K log 'log_sf'
545[    1.028636] c0 sec_getlog_supply_loggerinfo: 0xc0a68d50 0xc0c68d50 0xc0d68d50 0xc0da8d50
546[    1.028980] c0 zram: num_devices not specified. Using default: 1
547[    1.029013] c0 zram: Creating 1 devices ...
548[    1.029698] c0 k3dh_probe: is started.
549[    1.030065] c0 using defualt position
550[    1.030538] c0 k3dh_probe: is successful.
551[    1.031124] c0 input: gyro_sensor as /devices/virtual/input/input4
552[    1.040689] c0 akm8975_probe is called.
553[    1.045882] c0 akm8975_probe: asa_x = 168, asa_y = 168, asa_z = 179
554[    1.046385] c0 Registered sensors device: magnetic_sensor
555[    1.046424] c0 akm8975_probe is successful.
556[    1.055206] c0 mmc0 : 00 : 09 : 20120130 : 0.
557[    1.056545] c0 mmc0: Voltage range not supported for power class.
558[    1.056581] c0 mmc0: power class selection to bus width 8 failed
559[    1.056762] c0 mmc0: Voltage range not supported for power class.
560[    1.056796] c0 mmc0: power class selection to bus width 8 ddr 2 failed
561[    1.056956] c0 mmc0: new high speed DDR MMC card at address 0001
562[    1.057410] c0 mmcblk0: mmc0:0001 VIS00M 14.6 GiB 
563[    1.062987] c0  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
564[    1.095371] c0 mmc1: cmd 52 command timeout error
565[    1.095732] c0 mmc1: cmd 52 command timeout error
566[    1.099595] c0 mmc1: cmd 5 command timeout error
567[    1.099937] c0 mmc1: cmd 5 command timeout error
568[    1.100279] c0 mmc1: cmd 5 command timeout error
569[    1.100622] c0 mmc1: cmd 5 command timeout error
570[    1.105325] c1 cm3663_setup_reg: initial proximity value = 4
571[    1.106575] c0 input: proximity_sensor as /devices/virtual/input/input5
572[    1.107194] c0 input: light_sensor as /devices/virtual/input/input6
573[    1.109943] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
574[    1.110201] c0 audss_init: RCLK SRC[busclk]
575[    1.110296] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
576[    1.110536] c0 pmu_debug: 0x00000900
577[    1.121291] c0 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
578[    1.121333] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
579[    1.121384] c0 i2s_txctrl: Turn Off - spr is no active
580[    1.121429] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
581[    1.121464] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
582[    1.186017] c0 asoc: mc1n2-da0i <-> samsung-i2s.0 mapping ok
583[    1.187154] c0 Samsung SRP driver, (c) 2010 Samsung Electronics
584[    1.194975] c0 SRP: Driver successfully probed
585[    1.196260] c0 ALSA device list:
586[    1.196283] c0   #0: U1-YMU823
587[    1.196459] c0 GACT probability NOT on
588[    1.196488] c0 Mirror/redirect action on
589[    1.196513] c0 u32 classifier
590[    1.196531] c0     Actions configured
591[    1.196554] c0 Netfilter messages via NETLINK v0.30.
592[    1.196631] c0 nf_conntrack version 0.5.0 (12562 buckets, 50248 max)
593[    1.197560] c0 ctnetlink v0.93: registering with nfnetlink.
594[    1.197622] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
595[    1.197659] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
596[    1.198067] c0 xt_time: kernel timezone is -0000
597[    1.199605] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
598[    1.199800] c0 arp_tables: (C) 2002 David S. Miller
599[    1.199877] c0 TCP cubic registered
600[    1.201146] c0 NET: Registered protocol family 10
601[    1.203844] c0 Mobile IPv6
602[    1.203891] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
603[    1.204165] c0 IPv6 over IPv4 tunneling driver
604[    1.208920] c0 NET: Registered protocol family 17
605[    1.208971] c0 NET: Registered protocol family 15
606[    1.209089] c0 Bluetooth: RFCOMM TTY layer initialized
607[    1.209125] c0 Bluetooth: RFCOMM socket layer initialized
608[    1.209155] c0 Bluetooth: RFCOMM ver 1.11
609[    1.209180] c0 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
610[    1.209210] c0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
611[    1.209463] c0 NET: Registered protocol family 35
612[    1.209836] c0 Registering the dns_resolver key type
613[    1.209901] c0 EXYNOS4210: Adaptive Support Voltage init
614[    1.211191] c0 exynos4210_check_vdd_arm: current vdd_arm(1350000uV), set vdd_arm (1.2V)
615[    1.211760] c0 EXYNOS4: HPM value = 18
616[    1.211814] c0 EXYNOS4: IDS value = 14
617[    1.211836] c0 <6>Support 1.2GHz
618[    1.211856] c0 <6>ASV Group for This Exynos4210 is 0x40000003
619[    1.211895] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
620[    1.211958] c0 Registering SWP/SWPB emulation handler
621[    1.211996] c0 DVFS : VDD_ARM Voltage table set with 3 Group
622[    1.212027] c0 max8997_set_arm_voltage_table
623[    1.212058] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[1]=1275000, buck1_vol[1]=25
624[    1.212267] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[2]=1175000, buck1_vol[2]=21
625[    1.212464] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[3]=1075000, buck1_vol[3]=17
626[    1.212660] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[4]=975000, buck1_vol[4]=13
627[    1.212859] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[5]=950000, buck1_vol[5]=12
628[    1.213053] c0 max8997-pmic max8997-pmic: max8997_set_buck1_dvs_table: enable BUCK1 GPIO DVS
629[    1.213413] c0 DVFS : VDD_INT Voltage table set with 3 Group
630[    1.213782] c0 exynos4_pm_hotplug_device_init: 0
631[    1.213809] c0 EXYNOS4 PM-hotplug init function
632[    1.214143] c0 mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x144/0x590): 
633[    1.214185] c0 s5p-ehci s5p-ehci: usb phy usage(2)
634[    1.214327] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
635[    1.214751] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
636[    1.214902] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
637[    1.220059] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
638[    1.220155] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
639[    1.220195] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
640[    1.220233] c0 usb usb1: Product: S5P EHCI Host Controller
641[    1.220262] c0 usb usb1: Manufacturer: Linux 3.0.64-CM-gb758c834015-dirty ehci_hcd
642[    1.220300] c0 usb usb1: SerialNumber: s5p-ehci
643[    1.220972] c0 hub 1-0:1.0: USB hub found
644[    1.221007] c0 hub 1-0:1.0: 3 ports detected
645[    1.221398] c0 CP not ready, Active State low
646[    1.221533] c0 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 3, 2nd_throttle = 5
647[    1.221572] c0 @@@ get_refresh_interval = 0x2e
648[    1.221596] c0 @@@ get_refresh_interval = 0x5d
649[    1.221628] c0 ** temperature set value **
650[    1.221647] c0 1st throttling stop_temp  = 61, start_temp     = 64
651[    1.221676] c0 2nd throttling stop_temp  = 87, start_tmep     = 103
652[    1.221704] c0 tripping temp             = 110, s/w emergency temp = 120
653[    1.221735] c0 mem throttling stop_temp  = 80, start_temp     = 85
654[    1.221872] c0 exynos4210_tmu_init: triminfo = 0x00000052, low 8bit = 0x52, high 24 bit = 0x000000
655[    1.221924] c0 THD_TEMP:0x76:  TRIG_LEV0: 0x03
656[    1.221946] c0 TRIG_LEV1: 0x2a TRIG_LEV2: 0x31, TRIG_LEV3: 0xff
657[    1.272361] c0 [MODEM_IF] init_modem
658[    1.272396] c0 check phone active = 94
659[    1.272424] c0 umts_modem_cfg_gpio done
660[    1.272456] c0 modem_link_pm_config_gpio done
661[    1.272742] c0 mif: modem_probe: modem_if
662[    1.273550] c0 mif: phone_active_irq_handler: PA EVENT : reset =0, pa=0, cp_dump=0
663[    1.273778] c0 wake enabled for irq 366
664[    1.273811] c0 mif: create_modemctl_device: xmm6260 is created!!!
665[    1.274417] c0 wake enabled for irq 361
666[    1.274749] c0 usbcore: registered new interface driver cdc_modem
667[    1.274796] c0 mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xe438a800)
668[    1.274833] c0 mif: hsic_create_link_device: usb : create_link_device DONE
669[    1.274881] c0 mif: modem_probe: link created: usb
670[    1.275465] c0 mif: create_io_device: Bood device = umts_boot0
671[    1.284419] c1 mmc1: new high speed SDHC card at address 0007
672[    1.285103] c1 mmcblk1: mmc1:0007 SD16G 14.6 GiB 
673[    1.285763] c0 mif: modem_probe: Complete!!!
674[    1.286505] c1  mmcblk1: p1
675[    1.288156] c0 regulator_init_complete: safeout1 range: incomplete constraints, leaving on
676[    1.289785] c0 OTG s5pc110_otg_module_init(380): s3c_otg_module_init
677[    1.289984] c0 otg host_probe start c03c8558
678[    1.290324] c0 [TouchKey] i2c_touchkey_probe
679[    1.290639] c0 input: sec_touchkey as /devices/platform/i2c-gpio.8/i2c-8/8-0020/input/input7
680[    1.290932] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
681[    1.346177] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
682[    1.347856] c0 max8997-rtc max8997-rtc: setting system clock to 2020-01-25 23:39:10 UTC (1579995550)
683[    1.348170] c0 ctrl->mem.size = 0x500000
684[    1.348227] c0 ctrl->mem.base = 0x70f3c000
685[    1.348519] c0 
686[    1.348546] c0 
687[    1.348572] c0 
688[    1.348598] c0 cam_cfg_gpio: pdev->id=0
689[    1.349358] c0 FIMC0 registered successfully
690[    1.349584] c0 ctrl->mem.size = 0x0
691[    1.349636] c0 ctrl->mem.base = 0xffffffea
692[    1.350309] c0 FIMC1 registered successfully
693[    1.350536] c0 ctrl->mem.size = 0x1900000
694[    1.350596] c0 ctrl->mem.base = 0x6f63c000
695[    1.351170] c0 FIMC2 registered successfully
696[    1.351393] c0 ctrl->mem.size = 0x700000
697[    1.351449] c0 ctrl->mem.base = 0x6ef3c000
698[    1.352018] c0 FIMC3 registered successfully
699[    1.352516] c1 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
700[    1.378657] c1 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
701[    1.378764] c1 sec-battery sec-battery: sec_bat_probe: use sub-charger (max8922-charger)
702[    1.379410] c0 sec_bat_get_lpcharging_state: LP charging:0
703[    1.381001] c1 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loaded
704[    1.381505] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
705[    1.381605] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
706[    1.382274] c0 sec-battery sec-battery: sec_bat_check_temper: temp=260, adc=951
707[    1.382389] c0 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
708[    1.382547] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
709[    1.382665] c0 sec-battery sec-battery: soc(100), vfocv(4160), vcell(4183), temp(26), charging(1), health(1), chg_adc(0)
710[    1.385652] c1 Warning: unable to open an initial console.
711[    1.386000] c1 Freeing init memory: 988K
712[    2.415880] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
713[    2.416786] c0 sec-battery sec-battery: sec_bat_check_temper: temp=260, adc=954
714[    2.416956] c0 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
715[    2.417166] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
716[    2.417326] c0 sec-battery sec-battery: soc(100), vfocv(4160), vcell(4183), temp(26), charging(1), health(1), chg_adc(0)
717[    2.420366] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
718[    2.421624] c0 exynos4_handler_tmu_state: inform to init state to platform.
719[    3.415792] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
720[    3.416686] c0 sec-battery sec-battery: sec_bat_check_temper: temp=260, adc=966
721[    3.416851] c0 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
722[    3.417055] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
723[    3.417209] c0 sec-battery sec-battery: soc(100), vfocv(4160), vcell(4183), temp(26), charging(1), health(1), chg_adc(0)
724[    3.420397] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
725[    3.421454] c0 normal: free cpufreq_limit & interrupt enable.
726[    3.600333] c0 max8997-muic max8997-muic: max8997_muic_init_detect
727[    3.601066] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x41
728[    3.601194] c0 max8997-muic max8997-muic: detect_dev: ATTACHED
729[    3.601318] c0 max8997-muic max8997-muic: attach_usb
730[    3.601416] c0 max8997-muic max8997-muic: attach_charger: chg_type(0x1)
731[    3.601542] c0 [TSP] mxt224_ta_probe
732[    3.603787] c0 [TSP]TA_probe MXT224E T48 Byte2 is 82
733[    3.611556] c0 [TSP]TA_probe MXT224E T48 Byte2 is 114
734[    3.611673] c0 sec-battery sec-battery: sec_bat_set_property: cable was changed(3)
735[    3.611973] c0 max8997-charger max8997-charger: max8997_disable_charging: disable charging
736[    3.612711] c0 max8997-muic max8997-muic: switch_to_ap_usb
737[    3.612825] c0 max8997-muic max8997-muic: set_accdet(en) cntl2(0x20)
738[    3.614440] c0 max8922-charger max8922-charger: max8922_enable_charging: enable charging,USB
739[    3.915214] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
740[    4.415647] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
741[    4.416567] c1 sec-battery sec-battery: sec_bat_check_temper: temp=250, adc=970
742[    4.416733] c1 sec-battery sec-battery: Time past : 0 secs
743[    4.416853] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
744[    4.416994] c1 sec-battery sec-battery: sec_bat_check_ing_level_trigger : full interrupt cnt = 1
745[    4.417167] c1 sec-battery sec-battery: soc(100), vfocv(4160), vcell(4183), temp(25), charging(1), health(1), chg_adc(0)
746[    4.647720] c0 EXT2-fs (mmcblk0p10): error: couldn't mount because of unsupported optional features (40)
747[    4.671528] c0 EXT4-fs (mmcblk0p10): couldn't mount as ext3 due to feature incompatibilities
748[    4.749785] c1 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
749[    4.940593] c1 usb: enable_store enabled=0, !dev->enabled=1
750[    4.940676] c1 usb: usb_gadget_disconnect
751[    4.942627] c1 usb: enable_store enabled=1, !dev->enabled=1
752[    4.942716] c1 usb: enable_store vendor=18d1,product=1,bcdDevice=226
753[    4.942801] c1 ,Class=0,SubClass=0,Protocol=0
754[    4.942864] c1 usb: enable_store next cmd : usb_add_config
755[    4.942940] c1 usb: usb_gadget_connect
756[    5.415808] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
757[    5.416652] c0 sec-battery sec-battery: sec_bat_check_temper: temp=260, adc=953
758[    5.416788] c0 sec-battery sec-battery: Time past : 1 secs
759[    5.416883] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
760[    5.416990] c0 sec-battery sec-battery: sec_bat_check_ing_level_trigger : full interrupt cnt = 2
761[    5.417119] c0 sec-battery sec-battery: soc(100), vfocv(4160), vcell(4183), temp(26), charging(1), health(1), chg_adc(0)
762[    5.449579] c1 usb: enable_store enabled=0, !dev->enabled=0
763[    5.449687] c1 usb: usb_gadget_disconnect
764[    5.449786] c1 usb: usb_remove_config cdev->config=  (null), config=c09d820c
765[    5.460981] c1 usb: functions_store buff=rndis,mass_storage
766[    5.461100] c1 usb: android_enable_function name=rndis
767[    5.461202] c1 usb: android_enable_function name=mass_storage
768[    5.462253] c1 usb: enable_store enabled=1, !dev->enabled=1
769[    5.462368] c1 usb: enable_store vendor=18d1,product=d001,bcdDevice=226
770[    5.462484] c1 ,Class=0,SubClass=0,Protocol=0
771[    5.462565] c1 usb: enable_store next cmd : usb_add_config
772[    5.462664] c1 usb: android_bind_enabled_functions f:rndis
773[    5.462877] c1 android_usb gadget: using random self ethernet address
774[    5.463025] c1 android_usb gadget: using random host ethernet address
775[    5.480885] c1 rndis0: MAC c2:12:c2:14:95:5b
776[    5.480977] c1 rndis0: HOST MAC 92:69:3d:04:a5:b5
777[    5.481188] c1 usb: usb_string_id cdev(0xe42851e0)->next_string_id=1
778[    5.481306] c1 usb: usb_string_id cdev(0xe42851e0)->next_string_id=2
779[    5.481417] c1 usb: usb_string_id cdev(0xe42851e0)->next_string_id=3
780[    5.481578] c1 usb: android_bind_enabled_functions f:mass_storage
781[    5.481706] c1 usb: usb_gadget_connect
782[    5.487713] c1 usb: eth_open ++
783[    5.490853] c1 ADDRCONF(NETDEV_UP): rndis0: link is not ready
784[    6.624782] c1 usb: enable_store enabled=0, !dev->enabled=0
785[    6.624856] c1 usb: usb_gadget_disconnect
786[    6.624929] c1 usb: usb_remove_config cdev->config=  (null), config=c09d820c
787[    6.660928] c0 usb: enable_store enabled=1, !dev->enabled=1
788[    6.661001] c0 usb: enable_store vendor=18d1,product=d001,bcdDevice=226
789[    6.661078] c0 ,Class=0,SubClass=0,Protocol=0
790[    6.661131] c0 usb: enable_store next cmd : usb_add_config
791[    6.661202] c0 usb: android_bind_enabled_functions f:rndis
792[    6.661324] c0 android_usb gadget: using random self ethernet address
793[    6.661412] c0 android_usb gadget: using random host ethernet address
794[    6.666820] c0 rndis0: MAC 66:de:a0:d8:f7:29
795[    6.666878] c0 rndis0: HOST MAC 12:cc:a3:b4:99:c2
796[    6.666990] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=1
797[    6.667068] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=2
798[    6.667142] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=3
799[    6.667250] c0 usb: android_bind_enabled_functions f:mass_storage
800[    6.667335] c0 usb: usb_gadget_connect
801[    7.171306] c0 usb: enable_store enabled=0, !dev->enabled=0
802[    7.171416] c0 usb: usb_gadget_disconnect
803[    7.171519] c0 usb: usb_remove_config cdev->config=  (null), config=c09d820c
804[    7.216494] c0 usb: functions_store buff=rndis
805[    7.216598] c0 usb: android_enable_function name=rndis
806[    7.217652] c0 usb: enable_store enabled=1, !dev->enabled=1
807[    7.217765] c0 usb: enable_store vendor=18d1,product=d001,bcdDevice=226
808[    7.217883] c0 ,Class=0,SubClass=0,Protocol=0
809[    7.217962] c0 usb: enable_store next cmd : usb_add_config
810[    7.218061] c0 usb: android_bind_enabled_functions f:rndis
811[    7.218253] c0 android_usb gadget: using random self ethernet address
812[    7.218402] c0 android_usb gadget: using random host ethernet address
813[    7.236255] c0 rndis0: MAC f2:14:f4:ec:9e:39
814[    7.236346] c0 rndis0: HOST MAC d2:6d:05:73:f2:d4
815[    7.236460] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=1
816[    7.236574] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=2
817[    7.236689] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=3
818[    7.236849] c0 usb: usb_gadget_connect
819[    7.880498] c0 usb: enable_store enabled=0, !dev->enabled=0
820[    7.880610] c0 usb: usb_gadget_disconnect
821[    7.880723] c0 usb: usb_remove_config cdev->config=  (null), config=c09d820c
822[    7.917491] c0 usb: enable_store enabled=1, !dev->enabled=1
823[    7.917607] c0 usb: enable_store vendor=18d1,product=d001,bcdDevice=226
824[    7.917721] c0 ,Class=0,SubClass=0,Protocol=0
825[    7.917802] c0 usb: enable_store next cmd : usb_add_config
826[    7.917903] c0 usb: android_bind_enabled_functions f:rndis
827[    7.918102] c0 android_usb gadget: using random self ethernet address
828[    7.918251] c0 android_usb gadget: using random host ethernet address
829[    7.929730] c0 rndis0: MAC 96:d9:62:ad:e7:e7
830[    7.929819] c0 rndis0: HOST MAC de:48:19:35:4e:b4
831[    7.929931] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=1
832[    7.930121] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=2
833[    7.930235] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=3
834[    7.930392] c0 usb: usb_gadget_connect
835[    7.953238] c1 usb: enable_store enabled=0, !dev->enabled=0
836[    7.953350] c1 usb: usb_gadget_disconnect
837[    7.953453] c1 usb: usb_remove_config cdev->config=  (null), config=c09d820c
838[    7.987049] c0 usb: functions_store buff=rndis
839[    7.987154] c0 usb: android_enable_function name=rndis
840[    7.988276] c0 usb: enable_store enabled=1, !dev->enabled=1
841[    7.988389] c0 usb: enable_store vendor=18d1,product=d001,bcdDevice=226
842[    7.988506] c0 ,Class=0,SubClass=0,Protocol=0
843[    7.988588] c0 usb: enable_store next cmd : usb_add_config
844[    7.988690] c0 usb: android_bind_enabled_functions f:rndis
845[    7.988883] c0 android_usb gadget: using random self ethernet address
846[    7.989030] c0 android_usb gadget: using random host ethernet address
847[    8.000120] c0 rndis0: MAC e6:37:34:ad:e0:f1
848[    8.000211] c0 rndis0: HOST MAC 46:9f:f2:c6:9c:49
849[    8.000319] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=1
850[    8.000435] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=2
851[    8.000546] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=3
852[    8.000701] c0 usb: usb_gadget_connect
853[    8.020808] c0 usb: eth_open ++
854[    8.023957] c0 ADDRCONF(NETDEV_UP): rndis0: link is not ready
855[    9.533085] c0 EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
856[    9.622369] c1 preinit: (9.62) Welcome to Sailfish OS 3.2.1.20 (Nuuksio)
857[    9.716031] c1 preinit: (9.71) is_erase_needed: No : 0
858[    9.898288] c0 preinit: (9.89) get_bootstate: USER : 0
859[    9.900945] c0 preinit: (9.90) BOOTSTATE = USER
860[    9.905940] c0 preinit: (9.90) Booting to default.target
861[   10.031004] c0 systemd[1]: Failed to insert module 'autofs4': Function not implemented
862[   10.390815] c0 systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
863[   10.391798] c0 systemd[1]: Detected architecture arm.
864[   10.392793] c0 systemd[1]: No hostname configured.
865[   10.392990] c0 systemd[1]: Set hostname to <localhost>.
866[   10.922685] c0 max17042 9-0036: max17042_get_soc : soc(62e0)
867[   10.922763] c0 max17042_need_soc_recal: HW(0xe)
868[   10.922822] c0 max17042 9-0036: max17042_get_soc : use raw (98), soc (100)
869[   11.019687] c0 systemd[1]: sys-fs-cgroup-bfqio.mount: Cannot create mount unit for API file system /sys/fs/cgroup/bfqio. Refusing.
870[   11.030914] c0 systemd[1]: mnt-\x2elfs.mount: Where= setting doesn't match unit name. Refusing.
871[   11.036747] c0 systemd[1]: sys-fs-pstore.mount: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
872[   11.050735] c0 systemd[1]: data.mount: Unit is bound to inactive unit dev-block-mmcblk0p10.device. Stopping, too.
873[   11.178800] c0 systemd[1]: sys-fs-cgroup-bfqio.mount: Cannot add dependency job, ignoring: Unit sys-fs-cgroup-bfqio.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-cgroup-bfqio.mount' for details.
874[   11.179349] c0 systemd[1]: mnt-\x2elfs.mount: Cannot add dependency job, ignoring: Unit mnt-\x2elfs.mount failed to load: Invalid argument. See system logs and 'systemctl status mnt-\x2elfs.mount' for details.
875[   11.179810] c0 systemd[1]: sys-fs-pstore.mount: Cannot add dependency job, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-pstore.mount' for details.
876[   11.182480] c0 systemd[1]: ofono.service: Cannot add dependency job, ignoring: Unit ofono.service is masked.
877[   11.198368] c0 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
878[   11.199112] c0 systemd[1]: Starting of Arbitrary Executable File Formats File System Automount Point not supported.
879[   11.199456] c0 systemd[1]: Reached target Encrypted Volumes.
880[   11.199739] c0 systemd[1]: Reached target Swap.
881[   11.200463] c0 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
882[   11.200844] c0 systemd[1]: Reached target Login Prompts.
883[   11.201880] c0 systemd[1]: Created slice Root Slice.
884[   11.202740] c0 systemd[1]: Created slice System Slice.
885[   11.203649] c0 systemd[1]: Listening on Journal Socket (/dev/log).
886[   11.204381] c0 systemd[1]: Created slice User and Session Slice.
887[   11.204661] c0 systemd[1]: Reached target Slices.
888[   11.205178] c0 systemd[1]: Listening on udev Control Socket.
889[   11.205751] c0 systemd[1]: Listening on Journal Socket.
890[   11.265747] c0 systemd[1]: Mounting FFS mount...
891[   11.325984] c0 systemd[1]: Mounting Debug File System...
892[   11.401065] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
893[   11.467321] c0 systemd[1]: Starting Create list of required static device nodes for the current kernel...
894[   11.722046] c0 systemd[1]: Starting Setup Virtual Console...
895[   11.724560] c0 systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
896[   11.821318] c0 systemd[1]: Mounting Temporary Directory...
897[   12.012125] c0 systemd[1]: Starting Remount Root and Kernel File Systems...
898[   12.014390] c0 systemd[1]: Listening on Journal Audit Socket.
899[   12.152089] c0 systemd[1]: Starting Journal Service...
900[   12.153534] c0 systemd[1]: Listening on udev Kernel Socket.
901[   12.155232] c0 systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
902[   12.336593] c0 systemd[1]: Mounted Debug File System.
903[   12.345675] c0 systemd[1]: Mounted Temporary Directory.
904[   12.348000] c0 systemd[1]: dev-mtp.mount: Mount process exited, code=exited status=32
905[   12.371527] c0 systemd[1]: Failed to mount FFS mount.
906[   12.372241] c0 systemd[1]: dev-mtp.mount: Unit entered failed state.
907[   12.429117] c0 EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
908[   12.430410] c0 systemd[1]: Started Create list of required static device nodes for the current kernel.
909[   12.444905] c0 systemd-journald[1528]: Failed to register hostname fd in event loop: Operation not permitted. Ignoring.
910[   12.445622] c0 systemd[1]: Started Setup Virtual Console.
911[   12.445845] c0 type=1130 audit(1579995561.590:2): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
912[   12.475474] c0 systemd[1]: Started Remount Root and Kernel File Systems.
913[   12.475746] c0 type=1130 audit(1579995561.620:3): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
914[   12.495832] c0 systemd[1]: Starting udev Coldplug all Devices...
915[   12.684191] c0 systemd[1]: Starting Load/Save Random Seed...
916[   12.771902] c0 systemd[1]: Starting Clean RPM db region files at each reboot...
917[   12.796998] c0 systemd[1]: Starting Create Static Device Nodes in /dev...
918[   13.029048] c0 systemd[1]: Started Journal Service.
919[   13.030165] c0 type=1130 audit(1579995562.170:4): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
920[   13.086242] c0 type=1130 audit(1579995562.230:5): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
921[   13.253193] c0 type=1130 audit(1579995562.395:6): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rpm-db-clean comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
922[   13.253774] c0 type=1131 audit(1579995562.395:7): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rpm-db-clean comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
923[   13.282371] c0 type=1130 audit(1579995562.425:8): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
924[   13.578699] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
925[   13.679071] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
926[   13.751294] c0 type=1130 audit(1579995562.895:9): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
927[   13.882714] c0 systemd-journald[1528]: Received request to flush runtime journal from PID 1
928[   13.990700] c0 type=1130 audit(1579995563.135:10): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
929[   14.066603] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
930[   14.325655] c1 type=1130 audit(1579995563.470:11): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
931[   14.357252] c1 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
932[   14.448438] c1 MFC F/W loaded successfully (size: 376448)
933[   14.783367] c1 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: journal_async_commit,errors=panic
934[   14.801747] c1 [TSP] sec_touchscreen_enable
935[   14.802401] c0 [TSP] Calibration!!!!!!
936[   14.804658] c0 [TSP] Calibration End!!!!!!
937[   14.825175] c1 [TSP] sec_touchscreen_disable
938[   14.919693] c0 EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: journal_async_commit
939[   15.525204] c0 wifi_set_power = 1
940[   15.525236] c0 ------------------------------------------------
941[   15.525274] c0 ------------------------------------------------
942[   15.525318] c0 brcm_wlan_power Enter: power on
943[   15.525351] c0 gpio_table = [2] 
944[   15.525585] c0 WLAN: GPIO_WLAN_EN = 1
945[   15.640084] c0 usb: usb_ready udc_enable=0
946[   15.730166] c0 wifi_set_carddetect = 1
947[   15.730240] c0 gpio_table = [6] 
948[   15.730514] c0 Test logs pdev : c09b6480 s3c_device_hsmmc3 c09b6480
949[   15.730595] c0 Test logs notify_func = hsmmc3_notify_func: c048cffc
950[   15.730681] c0 mmc2: card inserted.
951[   15.960476] c0 mmc2: cmd 52 command timeout error
952[   15.960938] c0 mmc2: cmd 52 command timeout error
953[   15.964670] c0 mmc2: cmd 8 command timeout error
954[   15.977623] c0 mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
955[   15.980580] c0 mmc2: queuing unknown CIS tuple 0x80 (6 bytes)
956[   16.050234] c0 mmc2: new high speed SDIO card at address 0001
957[   16.239590] c0 alloc static buf at e4200000!
958[   16.240129] c0 dhdsdio_probe : no mutex held. set lock
959[   16.240307] c0 F1 signature read @0x18000000=0x16834330
960[   16.245544] c0 DHD: dongle ram size is set to 294912(orig 294912) at 0x0
961[   16.247354] c0 can't alloc section 7
962[   16.250237] c1 wl_create_event_handler thr:6c3 created
963[   16.252985] c1 p2p0: P2P Interface Registered
964[   16.253533] c0 CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xe2cd9598
965[   16.258409] c1 dhd_attach thr:6c4 created
966[   16.259685] c0 dhd_attach thr:6c5 created
967[   16.259773] c0 dhd_attach thr:6c6 created
968[   16.262270] c0 _dhdsdio_download_firmware: dongle image file download failed
969[   16.262338] c0 dhd_bus_start: dhdsdio_probe_download failed. firmware or nvram wrong
970[   16.262378] c0 dhdsdio_probe: dhd_bus_start failed
971[   16.265057] c0 dhd_detach thr:6c6 terminated OK
972[   16.265180] c0 dhd_detach thr:6c4 terminated OK
973[   16.265255] c0 dhd_detach thr:6c5 terminated OK
974[   16.320119] c1 [TSP] sec_touchscreen_enable
975[   16.320538] c0 CFG80211-INFO2) wl_event_handler : was terminated
976[   16.322214] c1 request_suspend_state: wakeup (3->0) at 16322198509 (2020-01-25 23:39:25.471727674 UTC)
977[   16.323072] c0 wl_destroy_event_handler thr:6c3 terminated OK
978[   16.350293] c0 wd wakelock count:0
979[   16.350341] c0 can't alloc section 7
980[   16.350368] c0 dhd_osl_detach: MEMORY LEAK 140 bytes
981[   16.350399] c0 dhdsdio_probe : the lock is released.
982[   16.354119] c0 
983[   16.354134] c0 Dongle Host Driver, version 1.61.47 (r)
984[   16.354164] c0 Compiled in drivers/net/wireless/bcmdhd on Jan 23 2020 at 00:05:53
985[   16.354224] c0 dhd_module_init: sdio_register_driver timeout or error 
986[   16.354840] c0 ## wifi_remove
987[   16.354862] c0 wifi_set_power = 0
988[   16.354883] c0 ------------------------------------------------
989[   16.354914] c0 ------------------------------------------------
990[   16.354945] c0 brcm_wlan_power Enter: power off
991[   16.354973] c0 gpio_table = [2] 
992[   16.354997] c0 WLAN: GPIO_WLAN_EN = 0
993[   16.402099] c0 lcd panel: id=2 brightness=159, bl=9, candela=150
994[   16.460340] c0 wifi_set_carddetect = 0
995[   16.460367] c0 gpio_table = [6] 
996[   16.460597] c0 Test logs pdev : c09b6480 s3c_device_hsmmc3 c09b6480
997[   16.460629] c0 Test logs notify_func = hsmmc3_notify_func: c048cffc
998[   16.460663] c0 mmc2: card inserted.
999[   16.532163] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
1000[   16.536187] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
1001[   16.583313] c0 lcd panel: id=2 brightness=165, bl=10, candela=160
1002[   16.587094] c1 request_suspend_state: wakeup (0->0) at 16587068842 (2020-01-25 23:39:25.736597257 UTC)
1003[   16.660176] c0 mmc2: cmd 7 command timeout error
1004[   16.660243] c0 mmc2: cmd 7 command timeout error
1005[   16.660303] c0 mmc2: cmd 7 command timeout error
1006[   16.660407] c0 mmc2: cmd 7 command timeout error
1007[   16.660766] c0 mmc2: card 0001 removed
1008[   16.663356] c0 lcd panel: id=2 brightness=159, bl=9, candela=150
1009[   16.690487] c0 mmc2: cmd 52 command timeout error
1010[   16.690898] c0 mmc2: cmd 52 command timeout error
1011[   16.694547] c0 mmc2: cmd 8 command timeout error
1012[   16.694956] c0 mmc2: cmd 5 command timeout error
1013[   16.695314] c0 mmc2: cmd 5 command timeout error
1014[   16.695670] c0 mmc2: cmd 5 command timeout error
1015[   16.696026] c0 mmc2: cmd 5 command timeout error
1016[   16.696431] c0 mmc2: cmd 55 command timeout error
1017[   16.696813] c0 mmc2: cmd 55 command timeout error
1018[   16.697208] c0 mmc2: cmd 55 command timeout error
1019[   16.697590] c0 mmc2: cmd 55 command timeout error
1020[   16.697975] c0 mmc2: cmd 1 command timeout error
1021[   16.725554] c0 mmc2: cmd 52 command timeout error
1022[   16.726127] c0 mmc2: cmd 52 command timeout error
1023[   16.732146] c0 mmc2: cmd 8 command timeout error
1024[   16.732538] c0 mmc2: cmd 5 command timeout error
1025[   16.732900] c0 mmc2: cmd 5 command timeout error
1026[   16.733258] c0 mmc2: cmd 5 command timeout error
1027[   16.733618] c0 mmc2: cmd 5 command timeout error
1028[   16.734011] c0 mmc2: cmd 55 command timeout error
1029[   16.734396] c0 mmc2: cmd 55 command timeout error
1030[   16.735133] c0 mmc2: cmd 55 command timeout error
1031[   16.735533] c0 mmc2: cmd 55 command timeout error
1032[   16.735918] c0 mmc2: cmd 1 command timeout error
1033[   17.159190] c0 usb: enable_show dev->enabled=1
1034[   17.159479] c0 usb: enable_store enabled=0, !dev->enabled=0
1035[   17.159559] c0 usb: usb_gadget_disconnect
1036[   17.159641] c0 usb: usb_remove_config cdev->config=  (null), config=c09d820c
1037[   17.390516] c0 usb: enable_show dev->enabled=0
1038[   17.390910] c0 usb: enable_store enabled=0, !dev->enabled=1
1039[   17.391023] c0 usb: usb_gadget_disconnect
1040[   17.391412] c0 usb: functions_show enabled_func=rndis
1041[   17.391742] c0 usb: functions_store buff=rndis
1042[   17.391824] c0 
1043[   17.391887] c0 usb: android_enable_function name=rndis
1044[   17.394310] c0 usb: enable_show dev->enabled=0
1045[   17.394657] c0 usb: enable_store enabled=1, !dev->enabled=1
1046[   17.394770] c0 usb: enable_store vendor=18d1,product=a02,bcdDevice=226
1047[   17.394886] c0 ,Class=0,SubClass=0,Protocol=0
1048[   17.394970] c0 usb: enable_store next cmd : usb_add_config
1049[   17.410236] c0 usb: android_bind_enabled_functions f:rndis
1050[   17.410486] c0 android_usb gadget: using random self ethernet address
1051[   17.410642] c0 android_usb gadget: using random host ethernet address
1052[   17.437042] c0 rndis0: MAC 9e:e1:e3:4b:3a:e0
1053[   17.437080] c0 rndis0: HOST MAC 0a:42:2a:3a:0f:6a
1054[   17.437145] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=1
1055[   17.437192] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=2
1056[   17.437235] c0 usb: usb_string_id cdev(0xe42851e0)->next_string_id=3
1057[   17.437294] c0 usb: usb_gadget_connect
1058[   17.485656] c1 usb: eth_open ++
1059[   17.486504] c1 ADDRCONF(NETDEV_UP): rndis0: link is not ready
1060[   17.600080] c0 max8997-muic max8997-muic: max8997_muic_usb_detect
1061[   17.600133] c0 max8997-muic max8997-muic: max8997_muic_usb_detect: usb attach
1062[   17.600173] c0 otg max8997_muic_usb_cb: usb mode=1
1063[   17.600197] c0 otg change mode : USB Cable Detached --> USB Cable Attached (0 --> 1) disabled
1064[   17.600236] c0 usb: s3c_vbus_enable, ready u_e: 0, is_active: 1
1065[   17.600264] c0 usb: s3c_vbus_enable is_active=1(udc_enable),softconnect=1
1066[   17.600368] c0 usb: s5p_usb_phy0_tune read original tune
1067[   17.600397] c0 usb: s5p_usb_phy0_tune save default phytune (0x819b3)
1068[   17.600426] c0 usb: s5p_usb_phy0_tune original tune=0x819b3
1069[   17.600453] c0 usb: s5p_usb_phy0_tune tune_mask=0x10380f, tune=0x10280b
1070[   17.600494] c0 usb: s5p_usb_phy0_tune custom tune=0x1829bb
1071[   17.600521] c0 usb: s5p_usb_phy0_tune modified tune=0x1829bb
1072[   17.675955] c0 audit_printk_skb: 33 callbacks suppressed
1073[   17.676011] c0 type=1130 audit(1579995566.820:23): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1074[   17.728556] c0 sec_bat_get_lpcharging_state: LP charging:0
1075[   17.735085] c0 init: /init.smdk4210.rc: 65: invalid command 'socket'
1076[   17.737347] c0 init: could not import file 'init.gps.rc' from '/init.smdk4210.rc'
1077[   17.737420] c0 init: could not import file '/init.zygote32.rc' from '/init.rc'
1078[   17.738870] c0 init: /init.cm.rc: 136: ignored duplicate definition of service 'bugreport'
1079[   17.739022] c0 init: could not import file '/init.superuser.rc' from '/init.cm.rc'
1080[   17.739470] c0 init: /dev/hw_random not found
1081[   17.739556] c0 keychord: using input dev max8997-muic for fevent
1082[   17.739598] c0 keychord: using input dev gpio-keys for fevent
1083[   17.739645] c0 keychord: using input dev sii9234_rcp for fevent
1084[   17.739936] c0 init: loglevel: invalid log level'64'
1085[   17.818855] c1 init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
1086[   17.836129] c0 init: /dev/hw_random not found
1087[   17.842728] c0 fs_mgr: Cannot open file /fstab.smdk4210
1088[   17.842812] c0 init: fs_mgr_mount_all returned an error
1089[   17.843121] c0 init: fs_mgr_mount_all returned unexpected error 255
1090[   17.843323] c0 fs_mgr: Cannot open file /fstab.smdk4210
1091[   17.966000] c0 Si4709_driver: version magic '3.0.64-CM-gef86b34 SMP preempt mod_unload ARMv7 p2v8 ' should be '3.0.64-CM-gb758c834015-dirty SMP preempt mod_unload ARMv7 p2v8 '
1092[   17.993596] c0 mdnie mdnie: scenario_store :: value=0
1093[   17.993680] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
1094[   17.993885] c0 mdnie mdnie: mode_store :: value=1
1095[   17.993948] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
1096[   18.000171] c1 max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2020-01-25 23:39:28
1097[   18.028645] c0 init: cannot find '/usr/libexec/droid-hybris/system/bin/minimediaservice', disabling 'minimedia'
1098[   18.028729] c0 init: cannot find '/usr/libexec/droid-hybris/system/bin/minisfservice', disabling 'minisf'
1099[   18.028801] c0 init: cannot find '/usr/libexec/droid-hybris/system/bin/miniafservice', disabling 'miniaf'
1100[   18.029764] c0 init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
1101[   18.035785] c0 init: using deprecated syntax for specifying property 'ro.manufacturer', use ${name} instead
1102[   18.035860] c0 init: property 'ro.manufacturer' doesn't exist while expanding '$ro.manufacturer'
1103[   18.035917] c0 init: cannot expand '$ro.manufacturer' while writing to '/sys/class/android_usb/android0/iManufacturer'
1104[   18.035993] c0 init: using deprecated syntax for specifying property 'ro.model', use ${name} instead
1105[   18.036061] c0 init: property 'ro.model' doesn't exist while expanding '$ro.model'
1106[   18.036119] c0 init: cannot expand '$ro.model' while writing to '/sys/class/android_usb/android0/iProduct'
1107[   18.036197] c0 init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
1108[   18.040140] c0 init: service 'console' requires console
1109[   18.069129] c0 usb: GET_DES
1110[   18.069203] c0 usb: android_work config=  (null),connected=1,sw_connected=0
1111[   18.069296] c0 usb: android_work sent uevent USB_STATE=CONNECTED
1112[   18.109841] c1 type=1130 audit(1579995567.105:24): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=droid-hal-init comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1113[   18.127837] c1 cbd: /check_debug_level: debug level=1, cp_debug=0
1114[   18.139429] c1 warning: `cbd' uses 32-bit capabilities (legacy support in use)
1115[   18.139491] c1 cbd: /main: Modem type = 1
1116[   18.139519] c1 cbd: /main: Boot link = 4
1117[   18.139546] c1 cbd: /main: Main link = 4
1118[   18.139613] c1 mif: misc_open: iod = umts_boot0
1119[   18.139646] c1 mif: usb_init_communication: 1787:cbd
1120[   18.143368] c1 store_ehci_power: EHCI turns off
1121[   18.143401] c1 s5p-ehci s5p-ehci: remove, state 4
1122[   18.143460] c1 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xa0/0x148
1123[   18.160530] c1 s5p-ehci s5p-ehci: USB bus 1 deregistered
1124[   18.177221] c0 usb: GET_DES
1125[   18.179344] c0 android_usb gadget: high speed config #1: android
1126[   18.179386] c0 usb: gether_connect ++
1127[   18.179414] c0 usb: gether_connect enable ep in/out
1128[   18.179450] c0 usb: gether_connect qlen=10
1129[   18.179478] c0 usb: gether_connect netif_carrier_on
1130[   18.179515] c0 usb: gether_connect eth_start
1131[   18.179542] c0 usb: eth_start ++
1132[   18.179597] c0 usb: SET_CON
1133[   18.180935] c0 ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
1134[   18.181115] c0 usb: android_work config=c09d820c,connected=1,sw_connected=1
1135[   18.181203] c0 usb: android_work sent uevent USB_STATE=CONFIGURED
1136[   18.190501] c1 CP not ready, Active State low
1137[   18.194163] c1 type=1305 audit(1579995567.190:25): audit_pid=1781 old=0 auid=4294967295 ses=4294967295 res=1
1138[   18.194388] c1 logd.auditd: start
1139[   18.240938] c1 mif: xmm6260_on: xmm6260_on()
1140[   18.286979] c1 type=2 
1141[   18.287313] c1 type=1130 audit(1579995567.205:27): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1142[   18.287598] c1 type=1130 audit(1579995567.230:28): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udhcpd comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1143[   18.515518] c1 type=1130 audit(1579995567.505:29): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=droid-late-start comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1144[   18.795181] c1 store_ehci_power: EHCI turns on
1145[   18.795229] c1 mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x144/0x590): 
1146[   18.795266] c1 [MODEM_IF]Slave Wake
1147[   18.795288] c1 mif: set hsic lpa phy init: slave wake-up (1)
1148[   18.795319] c1 s5p-ehci s5p-ehci: usb phy usage(2)
1149[   18.795488] c1 s5p-ehci s5p-ehci: S5P EHCI Host Controller
1150[   18.795859] c1 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
1151[   18.796045] c1 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
1152[   18.805085] c1 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
1153[   18.805192] c1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
1154[   18.805232] c1 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1155[   18.805272] c1 usb usb1: Product: S5P EHCI Host Controller
1156[   18.805304] c1 usb usb1: Manufacturer: Linux 3.0.64-CM-gb758c834015-dirty ehci_hcd
1157[   18.805343] c1 usb usb1: SerialNumber: s5p-ehci
1158[   18.805869] c1 hub 1-0:1.0: USB hub found
1159[   18.805904] c1 hub 1-0:1.0: 3 ports detected
1160[   18.806180] c1 [MODEM_IF]Active States =1, s5p-ehci
1161[   18.806234] c1 mif: link_pm_ioctl: 6f33
1162[   18.806274] c1 cbd: /hsic_xmit_boot: check [BOOTROM] link connected = [0]
1163[   18.811756] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
1164[   18.812025] c1 max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
1165[   18.812246] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
1166[   18.812286] c1 max8997 5-0066: Unused interrupt source: 0x0
1167[   18.813140] c1 max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2020-01-25 23:39:29
1168[   18.848279] c1 mif: misc_open: iod = umts_boot0
1169[   18.848320] c1 mif: usb_init_communication: 1784:rild
1170[   19.064907] c0 type=1130 audit(1579995568.020:30): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dsme comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1171[   19.100246] c1 type=1131 audit(1579995568.055:31): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=droid-late-start comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1172[   19.100643] c1 type=1130 audit(1579995568.055:32): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ohmd comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1173[   19.115937] c1 usb 1-2: new high speed USB device number 2 using s5p-ehci
1174[   19.170627] c0 type=1130 audit(1579995568.130:33): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1175[   19.248233] c1 usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11
1176[   19.248302] c1 usb 1-2: New USB device found, idVendor=058b, idProduct=0041
1177[   19.248347] c1 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1178[   19.251636] c1 mif: if_usb_probe: usbdev = 0xe2d91000
1179[   19.251677] c1 mif: if_usb_set_pipe: set 0
1180[   19.251701] c1 mif: if_usb_probe: devdata usbdev = 0xe2d91000
1181[   19.251773] c1 mif: if_usb_probe: successfully done
1182[   19.306417] c1 mif: link_pm_ioctl: 6f33
1183[   19.306459] c1 cbd: /hsic_xmit_boot: check [BOOTROM] link connected = [1]
1184[   19.410259] c1 mif: link_pm_ioctl: 6f33
1185[   19.553270] c0 type=1130 audit(1579995568.510:34): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
1186[   19.625889] c0 type=1130 audit(1579995568.585:35): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus-org.freedesktop.PolicyKit1 comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1187[   19.811764] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
1188[   19.812069] c1 max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
1189[   19.812320] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
1190[   19.812370] c1 max8997 5-0066: Unused interrupt source: 0x0
1191[   19.815216] c1 max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2020-01-25 23:39:30
1192[   20.010765] c0 type=1130 audit(1579995568.970:36): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=jolla-devicelock-encsfa comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1193[   20.574772] c0 type=1130 audit(1579995569.530:37): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1194[   20.811802] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
1195[   20.812203] c1 max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
1196[   20.812485] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
1197[   20.812541] c1 max8997 5-0066: Unused interrupt source: 0x0
1198[   20.813947] c1 max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2020-01-25 23:39:31
1199[   21.420304] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1200[   21.594022] c0 max17042 9-0036: max17042_get_soc : soc(62e0)
1201[   21.594147] c0 max17042_need_soc_recal: HW(0xe)
1202[   21.594246] c0 max17042 9-0036: max17042_get_soc : use raw (98), soc (100)
1203[   21.812142] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
1204[   21.813093] c1 max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
1205[   21.813802] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
1206[   21.813929] c1 max8997 5-0066: Unused interrupt source: 0x0
1207[   21.817268] c1 max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2020-01-25 23:39:32
1208[   22.712256] c1 type=1130 audit(1579995571.670:38): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshd@0-192.168.2.15:22-192.168.2.3:51150 comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1209[   22.811880] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
1210[   22.812320] c1 max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)
1211[   22.812795] c1 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
1212[   22.812897] c1 max8997 5-0066: Unused interrupt source: 0x0
1213[   22.814474] c1 max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2020-01-25 23:39:33
1214[   22.890857] c1 max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2020-01-25 23:41:43
1215[   23.015067] c1 mif: usb_rx_complete: urb err status = -71
1216[   23.034832] c0 mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0
1217[   23.034976] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 3)
1218[   23.035149] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 3)
1219[   23.035335] c0 mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0
1220[   23.035469] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 3)
1221[   23.035628] c0 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 3)
1222[   23.241876] c1 mif: link_pm_ioctl: 6f32
1223[   23.241948] c1 mif: link_pm_ioctl: 6f32
1224[   23.242012] c1 mif: link_pm_ioctl: 6f30
1225[   23.242331] c1 store_ehci_power: EHCI turns off
1226[   23.242412] c1 s5p-ehci s5p-ehci: remove, state 1
1227[   23.242557] c1 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xa0/0x148
1228[   23.242674] c1 usb 1-2: USB disconnect, device number 2 by usb_disconnect+0x74/0x11c
1229[   23.242958] c1 mif: if_usb_disconnect: 
1230[   23.243013] c1 mif: if_usb_disconnect: put dev 0xe2d91000
1231[   23.243349] c1 mif: if_usb_disconnect: 
1232[   23.267253] c1 s5p-ehci s5p-ehci: USB bus 1 deregistered
1233[   23.305771] c1 [MODEM_IF]Active States =0, s5p-ehci
1234[   23.356035] c1 mif: link_pm_ioctl: 6f31
1235[   23.356140] c1 mif: link_pm_ioctl: 6f32
1236[   23.856398] c1 mif: link_pm_ioctl: 6f32
1237[   23.856486] c1 mif: link_pm_ioctl: 6f30
1238[   23.856832] c1 store_ehci_power: EHCI turns on
1239[   23.856960] c1 mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x144/0x590): 
1240[   23.857064] c1 mif: set hsic lpa phy init: slave wake-up (1)
1241[   23.857154] c1 s5p-ehci s5p-ehci: usb phy usage(2)
1242[   23.857473] c1 s5p-ehci s5p-ehci: S5P EHCI Host Controller
1243[   23.858572] c1 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
1244[   23.859000] c1 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
1245[   23.865184] c1 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
1246[   23.865640] c1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
1247[   23.865811] c1 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1248[   23.865993] c1 usb usb1: Product: S5P EHCI Host Controller
1249[   23.866142] c1 usb usb1: Manufacturer: Linux 3.0.64-CM-gb758c834015-dirty ehci_hcd
1250[   23.866306] c1 usb usb1: SerialNumber: s5p-ehci
1251[   23.868926] c1 hub 1-0:1.0: USB hub found
1252[   23.869094] c1 hub 1-0:1.0: 3 ports detected
1253[   23.870682] c1 [MODEM_IF]Active States =1, s5p-ehci
1254[   23.870894] c1 mif: link_pm_ioctl: 6f31
1255[   23.871012] c1 mif: link_pm_ioctl: 6f33
1256[   24.175326] c1 usb 1-2: new high speed USB device number 2 using s5p-ehci
1257[   24.310291] c1 usb 1-2: New USB device found, idVendor=1519, idProduct=0020
1258[   24.310437] c1 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1259[   24.310564] c1 usb 1-2: Product: HSIC Device
1260[   24.310655] c1 usb 1-2: Manufacturer: Comneon
1261[   24.310747] c1 usb 1-2: SerialNumber: 0123456789
1262[   24.325848] c1 mif: if_usb_probe: usbdev = 0xe2d91000
1263[   24.325983] c1 mif: if_usb_set_pipe: set 0
1264[   24.326083] c1 mif: if_usb_probe: devdata usbdev = 0xe2d91000
1265[   24.326596] c1 mif: if_usb_probe: successfully done
1266[   24.329795] c1 mif: if_usb_probe: usbdev = 0xe2d91000
1267[   24.329929] c1 mif: if_usb_set_pipe: set 1
1268[   24.330143] c1 mif: if_usb_probe: devdata usbdev = 0xe2d91000
1269[   24.330534] c1 mif: if_usb_probe: successfully done
1270[   24.341995] c1 mif: if_usb_probe: usbdev = 0xe2d91000
1271[   24.342109] c1 mif: if_usb_set_pipe: set 2
1272[   24.342192] c1 mif: if_usb_probe: devdata usbdev = 0xe2d91000
1273[   24.342468] c1 mif: if_usb_probe: successfully done
1274[   24.345486] c1 mif: if_usb_probe: usbdev = 0xe2d91000
1275[   24.345599] c1 mif: if_usb_set_pipe: set 3
1276[   24.345684] c1 mif: if_usb_probe: devdata usbdev = 0xe2d91000
1277[   24.346026] c1 mif: link_pm_change_modem_state: set modem state 4 by if_usb_probe+0x44c/0x490
1278[   24.346196] c1 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 4)
1279[   24.346346] c1 mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 4)
1280[   24.346499] c1 mif: if_usb_probe: successfully done
1281[   24.371359] c1 mif: link_pm_ioctl: 6f33
1282[   24.371550] c1 mif: misc_release: iod = umts_boot0
1283[   24.433945] c1 cbd: /main: Boot up process done!!!
1284[   24.433999] c1 cbd: /status_loop: CP status_loop start (modem = 1)
1285[   24.434083] c1 mif: misc_open: iod = umts_boot0
1286[   24.434122] c1 mif: usb_init_communication: 1787:cbd
1287[   24.454621] c1 cbd: /status_loop: Wait event from modem 1
1288[   24.825117] c1 mif: link_pm_runtime_start: rpm_status: 0
1289[   24.825181] c1 mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci
1290[   24.850734] c1 mif: misc_release: iod = umts_boot0
1291[   24.854664] c1 mif: misc_open: iod = umts_ipc0
1292[   24.854717] c1 mif: usb_init_communication: 1784:rild
1293[   24.855384] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1294[   24.900204] c1 mif: usb_port_resume: 1283, 4
1295[   24.901758] c1 mif: start_ipc: send 'a'
1296[   24.902030] c1 mif: misc_open: iod = umts_rfs0
1297[   24.902189] c1 mif: usb_init_communication: 1784:rild
1298[   25.071568] c1 mif: IPC-RX(156): 7f 0c 00 00 09 00 ff 00 05 01 03 00 00 7e 7f 0c ...
1299[   25.085562] c1 mif: IPC-TX(13): 7f 0b 00 00 08 00 01 00 0a 0c 05 01 7e
1300[   25.293289] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1301[   25.293517] c0 mif: link_pm_runtime_work: rpm_states=3
1302[   25.335866] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1303[   25.385204] c0 mif: usb_port_resume: 1283, 4
1304[   25.593290] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1305[   25.593516] c0 mif: link_pm_runtime_work: rpm_states=3
1306[   25.600233] c0 max8997-muic max8997-muic: max8997_muic_mhl_detect
1307[   25.635755] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1308[   25.685213] c0 mif: usb_port_resume: 1283, 4
1309[   25.893115] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1310[   25.893300] c0 mif: link_pm_runtime_work: rpm_states=3
1311[   25.935561] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1312[   25.985111] c0 mif: usb_port_resume: 1283, 4
1313[   26.192576] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1314[   26.192728] c0 mif: link_pm_runtime_work: rpm_states=3
1315[   26.235695] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1316[   26.285202] c0 mif: usb_port_resume: 1283, 4
1317[   26.493243] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1318[   26.493425] c0 mif: link_pm_runtime_work: rpm_states=3
1319[   26.535833] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1320[   26.585217] c0 mif: usb_port_resume: 1283, 4
1321[   26.793255] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1322[   26.793431] c0 mif: link_pm_runtime_work: rpm_states=3
1323[   26.835906] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1324[   26.885217] c0 mif: usb_port_resume: 1283, 4
1325[   27.093266] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1326[   27.093456] c0 mif: link_pm_runtime_work: rpm_states=3
1327[   27.135809] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1328[   27.185262] c0 mif: usb_port_resume: 1283, 4
1329[   27.501163] c1 s5p-ehci s5p-ehci: host_phy_susp
1330[   28.440051] c0 rndis0: no IPv6 routers present
1331[   28.778995] c1 type=1131 audit(1579995577.735:39): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshd@0-192.168.2.15:22-192.168.2.3:51150 comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1332[   29.885514] c1 max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2020-01-25 23:41:44
1333[   31.215902] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=310
1334[   31.475706] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1335[   31.603757] c0 max17042 9-0036: max17042_get_soc : soc(62e0)
1336[   31.603867] c0 max17042_need_soc_recal: HW(0xe)
1337[   31.603964] c0 max17042 9-0036: max17042_get_soc : use raw (98), soc (100)
1338[   32.987952] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1339[   32.988224] c0 s5p-ehci s5p-ehci: host_phy_resume
1340[   33.015807] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1341[   33.065201] c0 mif: usb_port_resume: 1283, 4
1342[   33.066490] c1 mif: IPC-RX(17): 7f 0f 00 00 0c 00 ff 00 06 01 03 01 01 0c 01 00 ...
1343[   33.380505] c1 s5p-ehci s5p-ehci: host_phy_susp
1344[   33.460904] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
1345[   33.461139] c0 s5p-ehci s5p-ehci: host_phy_resume
1346[   33.490758] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
1347[   33.540162] c1 mif: usb_port_resume: 1283, 4
1348[   33.544378] c1 mif: IPC-RX(112): 7f 60 00 00 5d 00 ff 00 06 05 03 00 0c 01 fa 00 ...
1349[   33.860395] c1 s5p-ehci s5p-ehci: host_phy_susp
1350[   41.480669] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1351[   42.354051] c0 max17042 9-0036: max17042_get_soc : soc(62e0)
1352[   42.354168] c0 max17042_need_soc_recal: HW(0xe)
1353[   42.354266] c0 max17042 9-0036: max17042_get_soc : use raw (98), soc (100)
1354[   44.412966] c1 type=1130 audit(1579995593.370:40): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=oneshot-root comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1355[   45.001826] c1 type=1130 audit(1579995593.960:41): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1356[   45.008289] c1 type=1325 audit(1579995593.965:42): table=raw family=2 entries=3
1357[   45.010407] c1 type=1325 audit(1579995593.965:43): table=raw family=2 entries=3
1358[   45.010632] c1 type=1325 audit(1579995593.965:44): table=raw family=2 entries=3
1359[   45.010948] c1 type=1325 audit(1579995593.970:45): table=nat family=2 entries=5
1360[   45.012727] c1 type=1325 audit(1579995593.970:46): table=nat family=2 entries=5
1361[   45.013529] c1 type=1325 audit(1579995593.970:47): table=nat family=2 entries=5
1362[   45.014011] c1 type=1325 audit(1579995593.970:48): table=nat family=2 entries=5
1363[   45.014449] c1 type=1325 audit(1579995593.970:49): table=nat family=2 entries=5
1364[   45.015137] c1 type=1325 audit(1579995593.970:50): table=mangle family=2 entries=6
1365[   45.017288] c1 type=1325 audit(1579995593.975:51): table=mangle family=2 entries=6
1366[   45.017784] c1 type=1325 audit(1579995593.975:52): table=mangle family=2 entries=6
1367[   45.018226] c1 type=1325 audit(1579995593.975:53): table=mangle family=2 entries=6
1368[   45.018666] c1 type=1325 audit(1579995593.975:54): table=mangle family=2 entries=6
1369[   45.019107] c1 type=1325 audit(1579995593.975:55): table=mangle family=2 entries=6
1370[   45.019692] c1 type=1325 audit(1579995593.975:56): table=filter family=2 entries=4
1371[   45.022177] c1 type=1325 audit(1579995593.980:57): table=filter family=2 entries=4
1372[   45.022648] c1 type=1325 audit(1579995593.980:58): table=filter family=2 entries=4
1373[   45.023052] c1 type=1325 audit(1579995593.980:59): table=filter family=2 entries=4
1374[   45.040284] c1 type=1325 audit(1579995594.000:60): table=filter family=2 entries=4
1375[   45.050009] c1 type=1325 audit(1579995594.005:61): table=mangle family=2 entries=6
1376[   45.080405] c1 type=1325 audit(1579995594.035:62): table=nat family=2 entries=5
1377[   45.092233] c1 type=1325 audit(1579995594.050:63): table=filter family=10 entries=4
1378[   45.103647] c1 type=1325 audit(1579995594.060:64): table=mangle family=10 entries=6
1379[   45.136326] c1 type=1325 audit(1579995594.095:65): table=filter family=10 entries=4
1380[   45.141939] c0 audit: audit_lost=12 audit_rate_limit=20 audit_backlog_limit=64
1381[   45.141981] c0 audit: rate limit exceeded
1382[   45.440246] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
1383[   45.440758] c1 sec-battery sec-battery: sec_bat_check_temper: temp=280, adc=925
1384[   45.440799] c1 sec-battery sec-battery: Time past : 41 secs
1385[   45.440830] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
1386[   45.440871] c1 max8997-charger max8997-charger: max8997_disable_charging: disable charging
1387[   45.441157] c1 [BT] Bluetooth Power On.
1388[   45.441179] c0 max8922-charger max8922-charger: max8922_enable_charging: disable charging,USB
1389[   45.655450] c1 max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2020-01-25 23:41:43
1390[   45.731238] c0 usb: enable_show dev->enabled=1
1391[   45.731376] c0 usb: functions_show enabled_func=rndis
1392[   45.745105] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
1393[   45.745179] c0 sec-battery sec-battery: sec_bat_handle_charger_topoff: Charging Top-off
1394[   45.745256] c0 sec-battery sec-battery: soc(100), vfocv(4160), vcell(4189), temp(28), charging(4), health(1), chg_adc(0)
1395[   47.088704] c1 type=1130 audit(1579995596.040:101): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=create-home@100000 comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1396[   47.090686] c1 type=1131 audit(1579995596.050:102): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=create-home@100000 comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1397[   47.135451] c1 type=1130 audit(1579995596.090:103): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
1398[   47.366153] c0 type=1130 audit(1579995596.325:104): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
1399[   47.388254] c1 type=1130 audit(1579995596.345:105): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1400[   47.401354] c1 type=1130 audit(1579995596.360:106): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=connman-vpn comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1401[   48.451053] c1 type=1130 audit(1579995597.410:107): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1402[   48.451338] c1 type=1131 audit(1579995597.410:108): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1403[   48.723294] c1 type=1130 audit(1579995597.680:109): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@100000 comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1404[   48.764596] c1 type=1130 audit(1579995597.720:110): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1405[   48.820734] c0 type=1131 audit(1579995597.780:111): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
1406[   49.598848] c1 type=1130 audit(1579995598.555:112): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=start-user-session comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1407[   49.599121] c1 type=1131 audit(1579995598.555:113): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=start-user-session comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1408[   50.126808] c1 type=1130 audit(1579995599.080:114): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=runlevel-user-done comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1409[   50.127145] c1 type=1131 audit(1579995599.080:115): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=runlevel-user-done comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1410[   50.153287] c1 type=1130 audit(1579995599.110:116): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1411[   50.153576] c1 type=1131 audit(1579995599.110:117): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1412[   50.467130] c1 type=1130 audit(1579995599.425:118): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
1413[   51.002472] c0 mc1n2 6-003a: write 0 = 4b
1414[   51.003207] c0 mc1n2 6-003a: write 0 = 4b4b
1415[   51.003985] c0 mc1n2 6-003a: write 0 = 4bcb
1416[   51.004646] c0 mc1n2 6-003a: write 0 = cbcb
1417[   51.005364] c0 mc1n2 6-003a: write 1 = 4b
1418[   51.006007] c0 mc1n2 6-003a: write 1 = 4b4b
1419[   51.006783] c0 mc1n2 6-003a: write 1 = 4bcb
1420[   51.007352] c0 mc1n2 6-003a: write 1 = cbcb
1421[   51.007952] c0 mc1n2 6-003a: write 3 = 4b
1422[   51.008768] c0 mc1n2 6-003a: write 3 = 4b4b
1423[   51.009373] c0 mc1n2 6-003a: write 3 = 4bcb
1424[   51.011741] c0 mc1n2 6-003a: write 3 = cbcb
1425[   51.012419] c0 mc1n2 6-003a: write 4 = 4b
1426[   51.013417] c0 mc1n2 6-003a: write 4 = 4b4b
1427[   51.014127] c0 mc1n2 6-003a: write 4 = 4bcb
1428[   51.014870] c0 mc1n2 6-003a: write 4 = cbcb
1429[   51.015586] c0 mc1n2 6-003a: write 5 = 4b
1430[   51.016341] c0 mc1n2 6-003a: write 5 = 4b4b
1431[   51.016961] c0 mc1n2 6-003a: write 5 = 4bcb
1432[   51.017747] c0 mc1n2 6-003a: write 5 = cbcb
1433[   51.018582] c0 mc1n2 6-003a: write 7 = 4b
1434[   51.019170] c0 mc1n2 6-003a: write 7 = 4b4b
1435[   51.020057] c0 mc1n2 6-003a: write 7 = 4bcb
1436[   51.020760] c0 mc1n2 6-003a: write 7 = cbcb
1437[   51.021628] c0 mc1n2 6-003a: write 8 = 4b
1438[   51.022235] c0 mc1n2 6-003a: write 8 = 4b4b
1439[   51.022849] c0 mc1n2 6-003a: write 8 = 4bcb
1440[   51.023673] c0 mc1n2 6-003a: write 8 = cbcb
1441[   51.024695] c0 mc1n2 6-003a: write 9 = 4b
1442[   51.030416] c0 mc1n2 6-003a: write 9 = 4b4b
1443[   51.031098] c0 mc1n2 6-003a: write 9 = 4bcb
1444[   51.031783] c0 mc1n2 6-003a: write 9 = cbcb
1445[   51.032456] c0 mc1n2 6-003a: write b = 4b
1446[   51.033111] c0 mc1n2 6-003a: write b = 4b4b
1447[   51.034030] c0 mc1n2 6-003a: write b = 4bcb
1448[   51.035094] c0 mc1n2 6-003a: write b = cbcb
1449[   51.035749] c0 mc1n2 6-003a: write d = 4b
1450[   51.036537] c0 mc1n2 6-003a: write d = 4b4b
1451[   51.037353] c0 mc1n2 6-003a: write d = 4bcb
1452[   51.037961] c0 mc1n2 6-003a: write d = cbcb
1453[   51.038807] c0 mc1n2 6-003a: write e = 4b
1454[   51.039691] c0 mc1n2 6-003a: write e = 4b4b
1455[   51.040475] c0 mc1n2 6-003a: write e = 4bcb
1456[   51.041721] c0 mc1n2 6-003a: write e = cbcb
1457[   51.042410] c0 mc1n2 6-003a: write f = 4b
1458[   51.043111] c0 mc1n2 6-003a: write f = 4b4b
1459[   51.043762] c0 mc1n2 6-003a: write f = 4bcb
1460[   51.044405] c0 mc1n2 6-003a: write f = cbcb
1461[   51.045651] c0 mc1n2 6-003a: write 10 = 4b
1462[   51.046282] c0 mc1n2 6-003a: write 10 = 4b4b
1463[   51.047128] c0 mc1n2 6-003a: write 10 = 4bcb
1464[   51.047780] c0 mc1n2 6-003a: write 10 = cbcb
1465[   51.048506] c0 mc1n2 6-003a: write 11 = 13
1466[   51.049156] c0 mc1n2 6-003a: write 11 = 1313
1467[   51.049812] c0 mc1n2 6-003a: write 11 = 1393
1468[   51.050448] c0 mc1n2 6-003a: write 11 = 9393
1469[   51.051938] c0 mc1n2 6-003a: write 17 = 1a
1470[   51.052651] c0 mc1n2 6-003a: write 17 = 1a1a
1471[   51.053320] c0 mc1n2 6-003a: write 17 = 1a9a
1472[   51.054323] c0 mc1n2 6-003a: write 17 = 9a9a
1473[   51.055078] c0 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
1474[   51.055116] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
1475[   51.071404] c0 G:P:DmaAddr=@64620000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000
1476[   51.071591] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
1477[   51.071623] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
1478[   51.161855] c1 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
1479[   51.161906] c1 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
1480[   51.162094] c1 G:P:DmaAddr=@64620000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000
1481[   51.167985] c0 mc1n2 6-003a: write 11 = 939a
1482[   51.168951] c0 mc1n2 6-003a: write 11 = 9a9a
1483[   51.170119] c0 mc1n2 6-003a: write 1b = 2
1484[   51.174400] c0 G:C:DmaAddr=@64640000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffda0000
1485[   51.176937] c0 mc1n2 6-003a: write 11 = 9a93
1486[   51.178182] c0 mc1n2 6-003a: write 11 = 9393
1487[   51.178855] c0 mc1n2 6-003a: write 1b = 0
1488[   51.186536] c1 i2s_txctrl:Turn on
1489[   51.500461] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1490[   51.543879] c1 type=1130 audit(1579995600.500:119): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1491[   51.544333] c1 type=1131 audit(1579995600.500:120): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1492[   51.888732] c1 type=1130 audit(1579995600.845:121): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1493[   51.948874] c0 type=1131 audit(1579995600.905:122): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
1494[   52.362451] c0 max17042 9-0036: max17042_get_soc : soc(62e0)
1495[   52.362483] c0 max17042_need_soc_recal: HW(0xe)
1496[   52.362511] c0 max17042 9-0036: max17042_get_soc : use raw (98), soc (100)
1497[   52.384051] c0 type=1130 audit(1579995601.340:123): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mount-sd@mmcblk1p1 comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1498[   52.963199] c1 i2s_txctrl: Turn Off - spr is no active
1499[   52.963404] c1 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
1500[   52.963491] c1 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
1501[   53.020484] c1 type=1130 audit(1579995601.970:124): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
1502[   53.070364] c1 s3cfb s3cfb.0: [fb0] Alloc dma: 0x7172a000, size: 0x002ee000
1503[   53.070468] c1 s3cfb s3cfb.0: [fb1] Alloc dma: 0x71a18000, size: 0x002ee000
1504[   53.070578] c1 s3c-fimc1: FIMC1 1 opened.
1505[   53.074163] c1 Mali: mem_usage before 2213 : 8388608
1506[   53.263442] c1 type=1130 audit(1579995602.215:125): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1507[   53.319402] c1 type=1131 audit(1579995602.275:126): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
1508[   53.885423] c1 max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2020-01-25 23:41:44
1509[   54.514756] c1 type=1130 audit(1579995603.470:127): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
1510[   56.868738] c1 type=1130 audit(1579995605.825:128): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=display comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1511[   57.051985] c1 type=1130 audit(1579995606.010:129): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wayland comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1512[   57.052223] c1 type=1131 audit(1579995606.010:130): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wayland comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1513[   60.143006] c1 type=1130 audit(1579995609.100:131): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshd@1-192.168.2.15:22-192.168.2.3:51152 comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1514[   61.280233] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=330
1515[   61.540313] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1516[   62.207816] c1 Mali: Mali frequency 200
1517[   62.382428] c0 max17042 9-0036: max17042_get_soc : soc(62bd)
1518[   62.382459] c0 max17042_need_soc_recal: HW(0xe)
1519[   62.382483] c0 max17042 9-0036: max17042_get_soc : use raw (98), soc (100)
1520[   63.227094] c0 Mali: mem_usage before 2297 : 16515072
1521[   63.790392] c1 Mali: mem_usage before 2311 : 16515072
1522[   65.177607] c1 Mali: mem_usage before 2335 : 16515072
1523[   66.512494] c1 type=1130 audit(1579995615.470:132): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus-org.nemomobile.provisioning comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1524[   67.334886] c1 Mali: mem_usage before 2392 : 16515072
1525[   67.858755] c1 type=1130 audit(1579995616.815:133): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=init-done comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1526[   68.222336] c1 type=1130 audit(1579995617.180:134): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=policies-setup comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1527[   68.222620] c1 type=1131 audit(1579995617.180:135): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=policies-setup comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1528[   68.249241] c1 type=1130 audit(1579995617.205:136): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=oneshot-root-late comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1529[   71.560458] c1 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1530[   71.710392] c0 cpu1 turnning off!
1531[   71.716824] c1 IRQ112 no longer affine to CPU1
1532[   71.717565] c0 CPU1: shutdown
1533[   71.721404] c0 cpu1 off!
1534[   72.403980] c0 max17042 9-0036: max17042_get_soc : soc(629a)
1535[   72.404094] c0 max17042_need_soc_recal: HW(0xe)
1536[   72.404196] c0 max17042 9-0036: max17042_get_soc : use raw (98), soc (100)
1537[   77.864791] c0 usb: enable_show dev->enabled=1
1538[   77.866246] c0 usb: functions_show enabled_func=rndis
1539[   81.580804] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1540[   82.443837] c0 max17042 9-0036: max17042_get_soc : soc(629a)
1541[   82.443951] c0 max17042_need_soc_recal: HW(0xe)
1542[   82.444050] c0 max17042 9-0036: max17042_get_soc : use raw (98), soc (100)
1543[   83.827119] c0 lcd panel: id=2 brightness=145, bl=8, candela=140
1544[   83.830498] c0 lcd panel: id=2 brightness=129, bl=6, candela=120
1545[   83.843248] c0 lcd panel: id=2 brightness=115, bl=5, candela=110
1546[   83.846610] c0 lcd panel: id=2 brightness=104, bl=4, candela=100
1547[   83.852106] c0 lcd panel: id=2 brightness=96, bl=3, candela=90
1548[   83.866861] c0 lcd panel: id=2 brightness=84, bl=2, candela=70
1549[   83.871083] c0 lcd panel: id=2 brightness=67, bl=1, candela=40
1550[   83.898348] c0 lcd panel: id=2 brightness=35, bl=0, candela=30
1551[   83.975842] c0 request_suspend_state: sleep (0->3) at 83975816166 (2020-01-25 23:40:32.938901822 UTC)
1552[   83.975966] c0 [TouchKey] sec_touchkey_early_suspend
1553[   83.977197] c0 sii9234_early_suspend()
1554[   83.977240] c0 lcd panel: +ld9040_early_suspend
1555[   83.977274] c0 lcd panel: ld9040_power_off
1556[   84.040448] c0 max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2020-01-25 23:41:14
1557[   84.186991] c0 lcd panel: -ld9040_early_suspend
1558[   84.187090] c0 +s3cfb_early_suspend
1559[   84.202255] c0 s3cfb - disable power domain
1560[   84.202368] c0 -s3cfb_early_suspend
1561[   84.202537] c0 sync_system +
1562[   84.208578] c0 active wake lock sync_system
1563[   84.208668] c0 active wake lock mce_tklock_notify
1564[   84.208753] c0 active wake lock mce_mux
1565[   84.208825] c0 active wake lock usb device wake lock
1566[   84.208909] c0 active wake lock usb cb wake lock
1567[   84.208988] c0 active wake lock vbus_present
1568[   84.209072] c0 active wake lock mce_display_on, time left 954
1569[   84.278424] c0 sync_system -
1570[   85.520799] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
1571[   85.521704] c0 sec-battery sec-battery: sec_bat_check_temper: temp=260, adc=946
1572[   85.521867] c0 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
1573[   85.522069] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
1574[   85.522220] c0 max8997-charger max8997-charger: max8997_disable_charging: disable charging
1575[   85.522826] c0 max8922-charger max8922-charger: max8922_enable_charging: enable charging,USB
1576[   85.825231] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
1577[   85.825379] c0 sec-battery sec-battery: sec_bat_monitor_work: Start Recharging, Vcell = 4028125
1578[   85.825542] c0 sec-battery sec-battery: soc(100), vfocv(4157), vcell(4028), temp(26), charging(4), health(1), chg_adc(0)
1579[   89.893582] c0 max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2020-01-25 23:41:15
1580[   91.616992] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1581[   92.519063] c0 max17042 9-0036: max17042_get_soc : soc(6277)
1582[   92.519176] c0 max17042_need_soc_recal: HW(0xe)
1583[   92.519269] c0 max17042 9-0036: max17042_get_soc : use raw (98), soc (100)
1584[   97.096669] c0 type=1131 audit(1579995646.055:137): user pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus-org.nemomobile.provisioning comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
1585[   99.720157] c0 cpu1 turning on!
1586[   99.733711] c1 CPU1: Booted secondary processor
1587[   99.733742] c1 CPU1: Booted secondary processor
1588[   99.733849] c1 notifier_call_chain : NOTIFY BAD tick_notify
1589[   99.735054] c1 Switched to NOHz mode on CPU #1
1590[   99.739569] c0 cpu1 on
1591[  101.640290] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1592[  101.735368] c0 cpu1 turnning off!
1593[  101.736147] c1 IRQ112 no longer affine to CPU1
1594[  101.736578] c0 CPU1: shutdown
1595[  101.739369] c0 cpu1 off!
1596[  102.235154] c0 cpu1 turning on!
1597[  102.251247] c1 CPU1: Booted secondary processor
1598[  102.251278] c1 CPU1: Booted secondary processor
1599[  102.251372] c1 notifier_call_chain : NOTIFY BAD tick_notify
1600[  102.255042] c1 Switched to NOHz mode on CPU #1
1601[  102.256981] c0 cpu1 on
1602[  102.547704] c0 max17042 9-0036: max17042_get_soc : soc(629a)
1603[  102.547783] c0 max17042_need_soc_recal: HW(0xe)
1604[  102.547840] c0 max17042 9-0036: max17042_get_soc : use raw (98), soc (100)
1605[  106.255588] c0 cpu1 turnning off!
1606[  106.256978] c1 IRQ112 no longer affine to CPU1
1607[  106.257770] c0 CPU1: shutdown
1608[  106.259633] c0 cpu1 off!
1609[  111.665835] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
1610[  112.569070] c0 max17042 9-0036: max17042_get_soc : soc(629a)
1611[  112.569179] c0 max17042_need_soc_recal: HW(0xe)
1612[  112.569273] c0 max17042 9-0036: max17042_get_soc : use raw (98), soc (100)
1613[  113.892948] c0 max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2020-01-25 23:41:44
1614[  113.973620] c0 usb: enable_show dev->enabled=1
1615[  113.973916] c0 usb: functions_show enabled_func=rndis