· 6 years ago · Nov 02, 2019, 09:12 PM
1
2�DDR Version 1.20 20190314
3In
4channel 0
5CS = 0
6MR0=0x98
7MR4=0x1
8MR5=0xFF
9MR8=0x8
10MR12=0x72
11MR14=0x72
12MR18=0x0
13MR19=0x0
14MR24=0x8
15MR25=0x0
16CS = 1
17MR0=0x18
18MR4=0x1
19MR5=0xFF
20MR8=0x8
21MR12=0x72
22MR14=0x72
23MR18=0x0
24MR19=0x0
25MR24=0x8
26MR25=0x0
27channel 1
28CS = 0
29MR0=0x98
30MR4=0x1
31MR5=0xFF
32MR8=0x8
33MR12=0x72
34MR14=0x72
35MR18=0x0
36MR19=0x0
37MR24=0x8
38MR25=0x0
39CS = 1
40MR0=0x18
41MR4=0x1
42MR5=0xFF
43MR8=0x8
44MR12=0x72
45MR14=0x72
46MR18=0x0
47MR19=0x0
48MR24=0x8
49MR25=0x0
50channel 0 training pass!
51channel 1 training pass!
52change freq to 400MHz 0,1
53channel 0
54CS = 0
55MR0=0x98
56MR4=0x1
57MR5=0xFF
58MR8=0x8
59MR12=0x72
60MR14=0x72
61MR18=0x0
62MR19=0x0
63MR24=0x8
64MR25=0x0
65CS = 1
66MR0=0x18
67MR4=0x1
68MR5=0xFF
69MR8=0x8
70MR12=0x72
71MR14=0x72
72MR18=0x0
73MR19=0x0
74MR24=0x8
75MR25=0x0
76channel 1
77CS = 0
78MR0=0x98
79MR4=0x1
80MR5=0xFF
81MR8=0x8
82MR12=0x72
83MR14=0x72
84MR18=0x0
85MR19=0x0
86MR24=0x8
87MR25=0x0
88CS = 1
89MR0=0x18
90MR4=0x1
91MR5=0xFF
92MR8=0x8
93MR12=0x72
94MR14=0x72
95MR18=0x0
96MR19=0x0
97MR24=0x8
98MR25=0x0
99channel 0 training pass!
100channel 1 training pass!
101change freq to 800MHz 1,0
102Channel 0: LPDDR4,800MHz
103Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
104Channel 1: LPDDR4,800MHz
105Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
106256B stride
107ch 0 ddrconfig = 0x101, ddrsize = 0x2020
108ch 1 ddrconfig = 0x101, ddrsize = 0x2020
109pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
110OUT
111Boot1: 2019-03-14, version: 1.19
112CPUId = 0x0
113ChipType = 0x10, 250
114SdmmcInit=2 0
115BootCapSize=100000
116UserCapSize=119276MB
117FwPartOffset=2000 , 100000
118mmc0:cmd5,20
119mmc0:cmd51,40
120SdmmcInit=0 0
121BootCapSize=0
122UserCapSize=15193MB
123FwPartOffset=2000 , 0
124StorageInit ok = 328906
125SecureMode = 0
126SecureInit read PBA: 0x4
127SecureInit read PBA: 0x404
128SecureInit read PBA: 0x804
129SecureInit read PBA: 0xc04
130SecureInit read PBA: 0x1004
131SecureInit read PBA: 0x1404
132SecureInit read PBA: 0x1804
133SecureInit read PBA: 0x1c04
134SecureInit ret = 0, SecureMode = 0
135atags_set_bootdev: ret:(0)
136GPT 0x3380ec0 signature is wrong
137recovery gpt...
138GPT 0x3380ec0 signature is wrong
139recovery gpt fail!
140LoadTrust Addr:0x4000
141No find bl30.bin
142No find bl32.bin
143Load uboot, ReadLba = 2000
144Load OK, addr=0x200000, size=0xdd07c
145RunBL31 0x10000
146NOTICE: BL31: v1.3(debug):22b599a
147NOTICE: BL31: Built : 11:03:32, Jul 10 2019
148NOTICE: BL31: Rockchip release version: v1.1
149INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
150INFO: Using opteed sec cpu_context!
151INFO: boot cpu mask: 0
152INFO: plat_rockchip_pmu_init(1181): pd status 3e
153INFO: BL31: Initializing runtime services
154WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s deK
155ERROR: Error initializing runtime service opteed_fast
156INFO: BL31: Preparing for EL3 exit to normal world
157INFO: Entry point address = 0x200000
158INFO: SPSR = 0x3c9
159fdtdec_get_addr_size_fixed: reg: addr=ff770000, size=10000
160fdtdec_get_addr_size_fixed: reg: addr=ff320000, size=1000
161
162
163U-Boot 2017.09-03638-g55e8e8b-dirty (Oct 04 2019 - 15:12:04 -0400)
164
165Model: Pine64 RK3399 Pinebook Pro
166PreSerial: 2
167DRAM: 3.9 GiB
168Sysmem: init
169Relocation Offset is: f5bf0000
170I2c0 speed: 400000Hz
171PMIC: RK808
172vdd_center 900000 uV
173vdd_log init 900000 uV
174rk_board_init PWM2 pinctrl init fail!
175rk_board_init: vcc3v0_sdio cannot set regulator value -38
176vdd_center 900000 uV
177 DCDC_REG1@ vdd_center: 750000uV <-> 1400000uV, set 900000uV, enabling | suspend
178 DCDC_REG4@ vcc_1v8: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspeng
179 LDO_REG1@ vcc1v8_dvp: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspeng
180 LDO_REG4@ vcc_sd: 3300000uV <-> 3300000uV, set 3300000uV, enabling | suspeng
181 LDO_REG7@ vcca1v8_codec: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspeng
182 LDO_REG8@ vcc_3v0: 3000000uV <-> 3000000uV, set 3000000uV, enabling | suspeng
183 SWITCH_REG2@ vcc3v3_s0: -61uV <-> -61uV, set 0uV, enabling | suspend
184 dc-12v@ dc_12v: 12000000uV <-> 12000000uV, set 12000000uV, enabling | sus)
185 vcc-sys@ vcc_sys: 5000000uV <-> 5000000uV, set 5000000uV, enabling | suspen)
186 vcc3v3-sys@ vcc3v3_sys: 3300000uV <-> 3300000uV, set 3300000uV, enabling | suspen)
187 vcc-phy-regulator@ vcc_phy: -61uV <-> -61uV, set -61uV, enabling | suspeng
188 led-regulator@ led_regulator: -61uV <-> -61uV, set -61uV, enabling | suspeng
189 vcc5v0-host-en@ vcc5v0_host: 5000000uV <-> 5000000uV, set 5000000uV, enabling | suspen)
190vcc5v0-usb3-host-regulator@vcc5v0_usb3_host: -61uV <-> -61uV, set -61uV, enabling | suspg
191 vcc5v0-typec0-en@ vcc5v0_typec0: -61uV <-> -61uV, set -61uV, enabling | suspeng
192 vcc1v8-sdio@ vcc1v8_sdio: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspen)
193 vcc3v0-sdio@ vcc3v0_sdio: 3000000uV <-> 3000000uV, set 3000000uV, enabling | suspen)
194vdd_log init 900000 uV
195 vdd_log@ vdd_log: 800000uV <-> 1400000uV, set 900000uV, enabling | suspenV
196MMC: dwmmc@fe310000: 2, sdhci@fe330000: 0, dwmmc@fe320000: 1
197Invalid bus 0 (err=-19)
198*** Warning - spi_flash_probe_bus_cs() failed, using default environment
199
200In: serial
201Out: serial
202Err: serial
203Model: Pine64 RK3399 Pinebook Pro
204RKPARM: Invalid parameter part table
205switch to partitions #0, OK
206mmc1 is current device
207Found IDB in SDcard
208Bootdev(atags): mmc 1
209PartType: DOS
210rockchip_get_boot_mode: Could not found misc partition
211boot mode: None
212init_resource_list: failed to get resource part, ret=-1
213Can't find file:logo.bmp
214failed to display uboot logo
215CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
216CLK: (uboot. armb: enter 24000 KHz, init 24000 KHz, kernel 0N/A)
217 aplll 816000 KHz
218 apllb 24000 KHz
219 dpll 800000 KHz
220 cpll 24000 KHz
221 gpll 800000 KHz
222 npll 600000 KHz
223 vpll 24000 KHz
224 aclk_perihp 133333 KHz
225 hclk_perihp 66666 KHz
226 pclk_perihp 33333 KHz
227 aclk_perilp0 266666 KHz
228 hclk_perilp0 88888 KHz
229 pclk_perilp0 44444 KHz
230 hclk_perilp1 100000 KHz
231 pclk_perilp1 50000 KHz
232Net: No ethernet found.
233Hit key to stop autoboot('CTRL+C'): 0
234do_boot_rockchip: Could not find boot part
235Checking for mmc dev 1...
236RKPARM: Invalid parameter part table
237switch to partitions #0, OK
238mmc1 is current device
239Scanning mmc 1 for bootable partitions...
240Scanning mmc 1:1 for extlinux or boot scripts...
241Found U-Boot script /boot/boot.scr
2421024 bytes read in 11 ms (90.8 KiB/s)
243## Executing script at 00500000
24424695296 bytes read in 1065 ms (22.1 MiB/s)
24573882 bytes read in 57 ms (1.2 MiB/s)
2467362630 bytes read in 333 ms (21.1 MiB/s)
247## Flattened Device Tree blob at 08300000
248 Booting using the fdt blob at 0x8300000
249 reserving fdt memory region: addr=8300000 size=13000
250 Loading Device Tree to 00000000f3dc2000, end 00000000f3dd7fff ... OK
251Adding bank: 0x00200000 - 0xf8000000 (size: 0xf7e00000)
252Total: 2597.280 ms
253
254Starting kernel ...
255
256[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
257[ 0.000000] Linux version 5.4.0-0.2 (spiker@Khadas) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Sat 9
258[ 0.000000] Machine model: Pine64 Pinebook Pro
259[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
260[ 0.000000] printk: bootconsole [uart8250] enabled
261[ 0.000000] efi: Getting EFI parameters from FDT:
262[ 0.000000] efi: UEFI not found.
263[ 0.000000] cma: Reserved 64 MiB at 0x00000000f4000000
264[ 0.000000] psci: probing for conduit method from DT.
265[ 0.000000] psci: PSCIv1.0 detected in firmware.
266[ 0.000000] psci: Using standard PSCI v0.2 function IDs
267[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
268[ 0.000000] psci: SMC Calling Convention v1.0
269[ 0.000000] percpu: Embedded 22 pages/cpu s52376 r8192 d29544 u90112
270[ 0.000000] Detected VIPT I-cache on CPU0
271[ 0.000000] CPU features: detected: ARM erratum 845719
272[ 0.000000] CPU features: detected: GIC system register CPU interface
273[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
274[ 0.000000] Kernel command line: console=ttyS2,1500000 root=PARTUUID=d987086b-01 rw rootwait boot0
275[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
276[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
277[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
278[ 0.000000] Memory: 3890404K/4061184K available (16060K kernel code, 1204K rwdata, 5820K rodata, )
279[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
280[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
281[ 0.000000] Tasks RCU enabled.
282[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
283[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
284[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
285[ 0.000000] GICv3: 988 SPIs implemented
286[ 0.000000] GICv3: 0 Extended SPIs implemented
287[ 0.000000] GICv3: Distributor has no Range Selector support
288[ 0.000000] GICv3: 16 PPIs implemented
289[ 0.000000] GICv3: no VLPI support, no direct LPI support
290[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
291[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
292[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @ee880000 (flat, esz 8, psz 64K, shr )
293[ 0.000000] ITS: using cache flushing for cmd queue
294[ 0.000000] GICv3: using LPI property table @0x00000000ee840000
295[ 0.000000] GIC: using cache flushing for LPI property table
296[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000ee850000
297[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /c}
298[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5}
299[ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x440 with crng_init=0
300[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
301[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_ids
302[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
303[ 0.001952] Console: colour dummy device 80x25
304[ 0.002412] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 Bogo)
305[ 0.003397] pid_max: default: 32768 minimum: 301
306[ 0.003952] LSM: Security Framework initializing
307[ 0.004468] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
308[ 0.005188] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
309[ 0.013039] ASID allocator initialised with 32768 entries
310[ 0.015035] rcu: Hierarchical SRCU implementation.
311[ 0.017146] Platform MSI: interrupt-controller@fee20000 domain created
312[ 0.018169] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
313[ 0.020577] EFI services will not be available.
314[ 0.023453] smp: Bringing up secondary CPUs ...
315[ 0.031626] Detected VIPT I-cache on CPU1
316[ 0.031658] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
317[ 0.031672] GICv3: CPU1: using allocated LPI pending table @0x00000000ee860000
318[ 0.031713] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
319[ 0.039671] Detected VIPT I-cache on CPU2
320[ 0.039694] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
321[ 0.039705] GICv3: CPU2: using allocated LPI pending table @0x00000000ee870000
322[ 0.039730] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
323[ 0.047738] Detected VIPT I-cache on CPU3
324[ 0.047758] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
325[ 0.047769] GICv3: CPU3: using allocated LPI pending table @0x00000000ee900000
326[ 0.047792] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
327[ 0.058509] CPU features: detected: EL2 vector hardening
328[ 0.058806] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
329[ 0.059173] Detected PIPT I-cache on CPU4
330[ 0.060394] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
331[ 0.060852] GICv3: CPU4: using allocated LPI pending table @0x00000000ee910000
332[ 0.062013] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
333[ 0.079370] Detected PIPT I-cache on CPU5
334[ 0.080534] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
335[ 0.080964] GICv3: CPU5: using allocated LPI pending table @0x00000000ee920000
336[ 0.081977] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
337[ 0.088326] smp: Brought up 1 node, 6 CPUs
338[ 0.101807] SMP: Total of 6 processors activated.
339[ 0.102274] CPU features: detected: 32-bit EL0 Support
340[ 0.102808] CPU features: detected: CRC32 instructions
341[ 0.114203] CPU: All CPU(s) started at EL2
342[ 0.115315] alternatives: patching kernel code
343[ 0.120368] devtmpfs: initialized
344[ 0.137970] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 191126044s
345[ 0.139112] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
346[ 0.143162] xor: measuring software checksum speed
347[ 0.154294] 8regs : 1616.000 MB/sec
348[ 0.164426] 32regs : 1852.000 MB/sec
349[ 0.174606] arm64_neon: 1588.000 MB/sec
350[ 0.175007] xor: using function: 32regs (1852.000 MB/sec)
351[ 0.175561] pinctrl core: initialized pinctrl subsystem
352[ 0.177411] DMI not present or invalid.
353[ 0.178264] NET: Registered protocol family 16
354[ 0.191981] DMA: preallocated 2048 KiB pool for atomic allocations
355[ 0.192672] audit: initializing netlink subsys (disabled)
356[ 0.195040] audit: type=2000 audit(0.182:1): state=initialized audit_enabled=0 res=1
357[ 0.198346] cpuidle: using governor menu
358[ 0.199495] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
359[ 0.203536] Serial: AMBA PL011 UART driver
360[ 0.250004] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
361[ 0.250814] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
362[ 0.251451] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
363[ 0.252109] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
364[ 0.300466] cryptd: max_cpu_qlen set to 1000
365[ 0.399738] raid6: neonx8 gen() 1050 MB/s
366[ 0.416899] raid6: neonx8 xor() 1003 MB/s
367[ 0.434212] raid6: neonx4 gen() 1019 MB/s
368[ 0.451494] raid6: neonx4 xor() 980 MB/s
369[ 0.468781] raid6: neonx2 gen() 781 MB/s
370[ 0.486057] raid6: neonx2 xor() 814 MB/s
371[ 0.503408] raid6: neonx1 gen() 523 MB/s
372[ 0.520692] raid6: neonx1 xor() 617 MB/s
373[ 0.537962] raid6: int64x8 gen() 800 MB/s
374[ 0.555274] raid6: int64x8 xor() 523 MB/s
375[ 0.572560] raid6: int64x4 gen() 675 MB/s
376[ 0.589877] raid6: int64x4 xor() 507 MB/s
377[ 0.607177] raid6: int64x2 gen() 468 MB/s
378[ 0.624476] raid6: int64x2 xor() 412 MB/s
379[ 0.641802] raid6: int64x1 gen() 308 MB/s
380[ 0.659080] raid6: int64x1 xor() 316 MB/s
381[ 0.659494] raid6: using algorithm neonx8 gen() 1050 MB/s
382[ 0.660011] raid6: .... xor() 1003 MB/s, rmw enabled
383[ 0.660486] raid6: using neon recovery algorithm
384[ 0.662897] vcc3v3_pcie: supplied by dc_12v
385[ 0.664768] vcc_sys: supplied by dc_12v
386[ 0.665668] iommu: Default domain type: Translated
387[ 0.666868] rk_iommu ff650800.iommu: IRQ index 1 not found
388[ 0.668030] rk_iommu ff8f3f00.iommu: IRQ index 1 not found
389[ 0.668889] rk_iommu ff903f00.iommu: IRQ index 1 not found
390[ 0.669766] rk_iommu ff914000.iommu: IRQ index 1 not found
391[ 0.670549] rk_iommu ff924000.iommu: IRQ index 1 not found
392[ 0.671799] vgaarb: loaded
393[ 0.672652] SCSI subsystem initialized
394[ 0.674851] usbcore: registered new interface driver usbfs
395[ 0.675450] usbcore: registered new interface driver hub
396[ 0.676148] usbcore: registered new device driver usb
397[ 0.677102] pps_core: LinuxPPS API ver. 1 registered
398[ 0.677573] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.>
399[ 0.678469] PTP clock support registered
400[ 0.679714] Advanced Linux Sound Architecture Driver Initialized.
401[ 0.681069] Bluetooth: Core ver 2.22
402[ 0.681454] NET: Registered protocol family 31
403[ 0.681911] Bluetooth: HCI device and connection manager initialized
404[ 0.682524] Bluetooth: HCI socket layer initialized
405[ 0.683010] Bluetooth: L2CAP socket layer initialized
406[ 0.683505] Bluetooth: SCO socket layer initialized
407[ 0.684011] NetLabel: Initializing
408[ 0.684339] NetLabel: domain hash size = 128
409[ 0.684758] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
410[ 0.685373] NetLabel: unlabeled traffic allowed by default
411[ 0.688263] clocksource: Switched to clocksource arch_sys_counter
412[ 0.689644] VFS: Disk quotas dquot_6.6.0
413[ 0.690148] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
414[ 0.697794] thermal_sys: Registered thermal governor 'step_wise'
415[ 0.697825] thermal_sys: Registered thermal governor 'power_allocator'
416[ 0.699321] NET: Registered protocol family 2
417[ 0.701750] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
418[ 0.702785] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
419[ 0.703868] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
420[ 0.705207] TCP: Hash tables configured (established 32768 bind 32768)
421[ 0.706368] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
422[ 0.707214] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
423[ 0.708239] NET: Registered protocol family 1
424[ 0.711783] RPC: Registered named UNIX socket transport module.
425[ 0.712405] RPC: Registered udp transport module.
426[ 0.712854] RPC: Registered tcp transport module.
427[ 0.713469] RPC: Registered tcp NFSv4.1 backchannel transport module.
428[ 0.714998] PCI: CLS 0 bytes, default 64
429[ 0.725821] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
430[ 0.728758] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
431[ 0.730508] kvm [1]: IPA Size Limit: 40bits
432[ 0.732212] kvm [1]: vgic-v2@fff20000
433[ 0.732726] kvm [1]: GIC system register CPU interface enabled
434[ 0.737100] kvm [1]: vgic interrupt IRQ10
435[ 0.739970] kvm [1]: Hyp mode initialized successfully
436[ 0.806419] workingset: timestamp_bits=46 max_order=20 bucket_order=0
437[ 0.813419] zbud: loaded
438[ 0.816124] squashfs: version 4.0 (2009/01/31) Phillip Lougher
439[ 0.818298] NFS: Registering the id_resolver key type
440[ 0.818841] Key type id_resolver registered
441[ 0.819282] Key type id_legacy registered
442[ 0.819682] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
443[ 0.820370] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
444[ 0.822556] fuse: init (API version 7.31)
445[ 0.823499] 9p: Installing v9fs 9p2000 file system support
446[ 0.853908] NET: Registered protocol family 38
447[ 0.854405] Key type asymmetric registered
448[ 0.854803] Asymmetric key parser 'x509' registered
449[ 0.855377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
450[ 0.856136] io scheduler mq-deadline registered
451[ 0.856568] io scheduler kyber registered
452[ 0.861725] vcc5v0_host: supplied by vcc_sys
453[ 0.878478] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
454[ 0.879385] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_2
455[ 0.881819] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
456[ 0.882566] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num6
457[ 0.884990] pwm-regulator: supplied by vcc_sys
458[ 0.885763] vcc3v3_sys: supplied by vcc_sys
459[ 0.886261] vcc5v0_typec: supplied by vcc_sys
460[ 0.890428] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
461[ 0.893450] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
462[ 0.895542] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud = 1500000) is a 16550A
463[ 0.896718] printk: console [ttyS2] enabled
464[ 0.896718] printk: console [ttyS2] enabled
465[ 0.897506] printk: bootconsole [uart8250] disabled
466[ 0.897506] printk: bootconsole [uart8250] disabled
467[ 0.900884] rockchip-vop ff8f0000.vop: Adding to iommu group 1
468[ 0.902196] rockchip-vop ff900000.vop: Adding to iommu group 2
469[ 0.908504] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
470[ 0.911172] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
471[ 0.912018] rockchip-drm display-subsystem: failed to bind ff940000.hdmi (ops dw_hdmi_rockchip_op7
472[ 0.913420] rockchip-drm display-subsystem: master bind failed: -517
473[ 0.918801] cacheinfo: Unable to detect cache hierarchy for CPU 0
474[ 0.927712] brd: module loaded
475[ 0.938301] loop: module loaded
476[ 0.953618] spi-nor spi0.0: gd25q128 (16384 Kbytes)
477[ 0.961433] 3 fixed-partitions partitions found on MTD device spi0.0
478[ 0.962035] Creating 3 MTD partitions on "spi0.0":
479[ 0.962465] 0x000000000000-0x0000003f8000 : "loader"
480[ 0.966234] 0x0000003f8000-0x000000400000 : "env"
481[ 0.972072] 0x0000007c0000-0x000000800000 : "vendor"
482[ 0.999312] libphy: Fixed MDIO Bus: probed
483[ 1.000573] tun: Universal TUN/TAP device driver, 1.6
484[ 1.003429] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
485[ 1.003985] e100: Copyright(c) 1999-2006 Intel Corporation
486[ 1.004510] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
487[ 1.005136] e1000: Copyright (c) 1999-2006 Intel Corporation.
488[ 1.005682] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
489[ 1.006209] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
490[ 1.006770] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
491[ 1.007404] igb: Copyright (c) 2007-2014 Intel Corporation.
492[ 1.007946] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
493[ 1.008631] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
494[ 1.009195] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
495[ 1.009864] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
496[ 1.012383] sky2: driver version 1.30
497[ 1.014610] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
498[ 1.015361] usbcore: registered new interface driver pegasus
499[ 1.015894] usbcore: registered new interface driver rtl8150
500[ 1.016451] usbcore: registered new interface driver r8152
501[ 1.016992] usbcore: registered new interface driver asix
502[ 1.017499] usbcore: registered new interface driver ax88179_178a
503[ 1.018084] usbcore: registered new interface driver cdc_ether
504[ 1.018627] usbcore: registered new interface driver dm9601
505[ 1.019223] usbcore: registered new interface driver CoreChips
506[ 1.019775] usbcore: registered new interface driver smsc75xx
507[ 1.020332] usbcore: registered new interface driver smsc95xx
508[ 1.020873] usbcore: registered new interface driver net1080
509[ 1.021412] usbcore: registered new interface driver plusb
510[ 1.021988] usbcore: registered new interface driver cdc_subset
511[ 1.022540] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
512[ 1.023265] usbcore: registered new interface driver cdc_ncm
513[ 1.024410] VFIO - User Level meta-driver version: 0.3
514[ 1.032788] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
515[ 1.033593] dwc3 fe800000.dwc3: IRQ otg not found
516[ 1.034028] dwc3 fe800000.dwc3: IRQ dwc_usb3 not found
517[ 1.035418] dwc3 fe800000.dwc3: IRQ host not found
518[ 1.035869] dwc3 fe800000.dwc3: IRQ dwc_usb3 not found
519[ 1.042583] dwc3 fe900000.dwc3: IRQ host not found
520[ 1.043059] dwc3 fe900000.dwc3: IRQ dwc_usb3 not found
521[ 1.045686] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
522[ 1.046319] ehci-pci: EHCI PCI platform driver
523[ 1.046763] ehci-platform: EHCI generic platform driver
524[ 1.049791] ehci-platform fe380000.usb: EHCI Host Controller
525[ 1.050394] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
526[ 1.051409] ehci-platform fe380000.usb: irq 29, io mem 0xfe380000
527[ 1.059004] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
528[ 1.061296] hub 1-0:1.0: USB hub found
529[ 1.061659] hub 1-0:1.0: 1 port detected
530[ 1.064825] ehci-platform fe3c0000.usb: EHCI Host Controller
531[ 1.065392] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
532[ 1.066288] ehci-platform fe3c0000.usb: irq 31, io mem 0xfe3c0000
533[ 1.072971] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
534[ 1.074267] hub 2-0:1.0: USB hub found
535[ 1.074621] hub 2-0:1.0: 1 port detected
536[ 1.075647] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
537[ 1.076348] ohci-pci: OHCI PCI platform driver
538[ 1.076829] ohci-platform: OHCI generic platform driver
539[ 1.077642] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
540[ 1.078262] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
541[ 1.079200] ohci-platform fe3a0000.usb: irq 30, io mem 0xfe3a0000
542[ 1.135745] hub 3-0:1.0: USB hub found
543[ 1.136119] hub 3-0:1.0: 1 port detected
544[ 1.137113] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
545[ 1.137717] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
546[ 1.138589] ohci-platform fe3e0000.usb: irq 32, io mem 0xfe3e0000
547[ 1.195638] hub 4-0:1.0: USB hub found
548[ 1.196013] hub 4-0:1.0: 1 port detected
549[ 1.197858] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
550[ 1.198405] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
551[ 1.199272] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00000000020
552[ 1.200160] xhci-hcd xhci-hcd.0.auto: irq 226, io mem 0xfe800000
553[ 1.202098] hub 5-0:1.0: USB hub found
554[ 1.202463] hub 5-0:1.0: 1 port detected
555[ 1.203254] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
556[ 1.203753] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
557[ 1.204452] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
558[ 1.205084] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
559[ 1.206323] hub 6-0:1.0: USB hub found
560[ 1.206676] hub 6-0:1.0: 1 port detected
561[ 1.207591] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
562[ 1.208106] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
563[ 1.208976] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00000000020
564[ 1.209960] xhci-hcd xhci-hcd.1.auto: irq 227, io mem 0xfe900000
565[ 1.211382] hub 7-0:1.0: USB hub found
566[ 1.211774] hub 7-0:1.0: 1 port detected
567[ 1.212465] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
568[ 1.212976] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
569[ 1.213657] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
570[ 1.214291] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
571[ 1.215489] hub 8-0:1.0: USB hub found
572[ 1.215861] hub 8-0:1.0: 1 port detected
573[ 1.216798] usbcore: registered new interface driver usb-storage
574[ 1.220753] usbcore: registered new interface driver iforce
575[ 1.221511] usbcore: registered new interface driver pxrc
576[ 1.222393] usbcore: registered new interface driver xpad
577[ 1.223679] i2c /dev entries driver
578[ 1.227490] rk808 0-001b: chip id: 0x0
579[ 1.233015] rk808-regulator rk808-regulator: there is no dvs0 gpio
580[ 1.233638] rk808-regulator rk808-regulator: there is no dvs1 gpio
581 0B@@`F@`8