· 6 years ago · Nov 21, 2019, 06:14 PM
1[ 0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26
2[ 0.000000] Linux version 5.3.0-23-generic (buildd@lgw01-amd64-002) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #25-Ubuntu SMP Tue Nov 12 09:22:33 UTC 2019 (Ubuntu 5.3.0-23.25-generic 5.3.7)
3[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-23-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
4[ 0.000000] KERNEL supported cpus:
5[ 0.000000] Intel GenuineIntel
6[ 0.000000] AMD AuthenticAMD
7[ 0.000000] Hygon HygonGenuine
8[ 0.000000] Centaur CentaurHauls
9[ 0.000000] zhaoxin Shanghai
10[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
11[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
12[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
13[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
14[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
15[ 0.000000] BIOS-provided physical RAM map:
16[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
17[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
18[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
19[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bab7efff] usable
20[ 0.000000] BIOS-e820: [mem 0x00000000bab7f000-0x00000000bbe7efff] reserved
21[ 0.000000] BIOS-e820: [mem 0x00000000bbe7f000-0x00000000bbf7efff] ACPI NVS
22[ 0.000000] BIOS-e820: [mem 0x00000000bbf7f000-0x00000000bbffefff] ACPI data
23[ 0.000000] BIOS-e820: [mem 0x00000000bbfff000-0x00000000bbffffff] usable
24[ 0.000000] BIOS-e820: [mem 0x00000000bc000000-0x00000000bf1fffff] reserved
25[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
26[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
27[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
28[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
29[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
30[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
31[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
32[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable
33[ 0.000000] NX (Execute Disable) protection: active
34[ 0.000000] SMBIOS 2.7 present.
35[ 0.000000] DMI: Hewlett-Packard HP ProBook 650 G1/1993, BIOS L77 Ver. 01.43 01/25/2018
36[ 0.000000] tsc: Fast TSC calibration using PIT
37[ 0.000000] tsc: Detected 2494.385 MHz processor
38[ 0.002106] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
39[ 0.002107] e820: remove [mem 0x000a0000-0x000fffff] usable
40[ 0.002113] last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
41[ 0.002117] MTRR default type: uncachable
42[ 0.002118] MTRR fixed ranges enabled:
43[ 0.002119] 00000-9FFFF write-back
44[ 0.002120] A0000-BFFFF uncachable
45[ 0.002120] C0000-FFFFF write-protect
46[ 0.002121] MTRR variable ranges enabled:
47[ 0.002122] 0 base 00FF800000 mask 7FFF800000 write-protect
48[ 0.002123] 1 base 0000000000 mask 7F80000000 write-back
49[ 0.002124] 2 base 0080000000 mask 7FC0000000 write-back
50[ 0.002125] 3 base 00BE000000 mask 7FFE000000 uncachable
51[ 0.002126] 4 base 00BD000000 mask 7FFF000000 uncachable
52[ 0.002126] 5 base 0100000000 mask 7F00000000 write-back
53[ 0.002127] 6 base 0200000000 mask 7E00000000 write-back
54[ 0.002128] 7 base 0400000000 mask 7FC0000000 write-back
55[ 0.002128] 8 base 043FE00000 mask 7FFFE00000 uncachable
56[ 0.002129] 9 disabled
57[ 0.002458] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
58[ 0.002598] last_pfn = 0xbc000 max_arch_pfn = 0x400000000
59[ 0.010796] check: Scanning 1 areas for low memory corruption
60[ 0.010800] Using GB pages for direct mapping
61[ 0.010802] BRK [0x39b801000, 0x39b801fff] PGTABLE
62[ 0.010803] BRK [0x39b802000, 0x39b802fff] PGTABLE
63[ 0.010804] BRK [0x39b803000, 0x39b803fff] PGTABLE
64[ 0.010833] BRK [0x39b804000, 0x39b804fff] PGTABLE
65[ 0.010835] BRK [0x39b805000, 0x39b805fff] PGTABLE
66[ 0.010939] BRK [0x39b806000, 0x39b806fff] PGTABLE
67[ 0.010962] BRK [0x39b807000, 0x39b807fff] PGTABLE
68[ 0.010988] BRK [0x39b808000, 0x39b808fff] PGTABLE
69[ 0.011017] RAMDISK: [mem 0x31ce5000-0x34e69fff]
70[ 0.011025] ACPI: Early table checksum verification disabled
71[ 0.011028] ACPI: RSDP 0x00000000000F2FE0 000024 (v02 HPQOEM)
72[ 0.011031] ACPI: XSDT 0x00000000BBFFE120 00009C (v01 HPQOEM SLIC-MPC 00000001 01000013)
73[ 0.011037] ACPI: FACP 0x00000000BBFFC000 00010C (v05 HPQOEM 1993 00000001 HP 00000001)
74[ 0.011042] ACPI: DSDT 0x00000000BBFD2000 024FD1 (v02 HPQOEM 1993 00000001 INTL 20110112)
75[ 0.011045] ACPI: FACS 0x00000000BBDE4000 000040
76[ 0.011047] ACPI: FACS 0x00000000BBDE4000 000040
77[ 0.011049] ACPI: HPET 0x00000000BBFFB000 000038 (v01 HPQOEM 1993 00000001 HP 00000001)
78[ 0.011052] ACPI: APIC 0x00000000BBFFA000 0000BC (v01 HPQOEM 1993 00000001 HP 00000001)
79[ 0.011054] ACPI: MCFG 0x00000000BBFF9000 00003C (v01 HPQOEM 1993 00000001 HP 00000001)
80[ 0.011056] ACPI: ASF! 0x00000000BBFF8000 0000A5 (v32 HPQOEM 1993 00000001 HP 00000001)
81[ 0.011059] ACPI: TCPA 0x00000000BBFF7000 000032 (v02 HPQOEM 1993 00000000 HP 00000001)
82[ 0.011062] ACPI: SSDT 0x00000000BBFCF000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
83[ 0.011064] ACPI: SSDT 0x00000000BBFCE000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
84[ 0.011067] ACPI: MSDM 0x00000000BBFCD000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP 00000001)
85[ 0.011069] ACPI: FPDT 0x00000000BBFCC000 000044 (v01 HPQOEM 1993 00000001 HP 00000001)
86[ 0.011072] ACPI: BGRT 0x00000000BBFCB000 000038 (v00 HPQOEM 1993 00000001 HP 00000001)
87[ 0.011074] ACPI: SSDT 0x00000000BBFC7000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
88[ 0.011077] ACPI: SSDT 0x00000000BBFC6000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
89[ 0.011080] ACPI: SSDT 0x00000000BBFC5000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
90[ 0.011082] ACPI: SSDT 0x00000000BBFC4000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
91[ 0.011090] ACPI: Local APIC address 0xfee00000
92[ 0.011173] No NUMA configuration found
93[ 0.011174] Faking a node at [mem 0x0000000000000000-0x000000043fdfffff]
94[ 0.011183] NODE_DATA(0) allocated [mem 0x43fdd5000-0x43fdfffff]
95[ 0.011386] Zone ranges:
96[ 0.011387] DMA [mem 0x0000000000001000-0x0000000000ffffff]
97[ 0.011388] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
98[ 0.011389] Normal [mem 0x0000000100000000-0x000000043fdfffff]
99[ 0.011390] Device empty
100[ 0.011391] Movable zone start for each node
101[ 0.011394] Early memory node ranges
102[ 0.011395] node 0: [mem 0x0000000000001000-0x000000000009cfff]
103[ 0.011396] node 0: [mem 0x0000000000100000-0x00000000bab7efff]
104[ 0.011397] node 0: [mem 0x00000000bbfff000-0x00000000bbffffff]
105[ 0.011397] node 0: [mem 0x0000000100000000-0x000000043fdfffff]
106[ 0.011593] Zeroed struct page in unavailable ranges: 21732 pages
107[ 0.011594] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fdfffff]
108[ 0.011596] On node 0 totalpages: 4172060
109[ 0.011597] DMA zone: 64 pages used for memmap
110[ 0.011597] DMA zone: 21 pages reserved
111[ 0.011598] DMA zone: 3996 pages, LIFO batch:0
112[ 0.011647] DMA32 zone: 11886 pages used for memmap
113[ 0.011648] DMA32 zone: 760704 pages, LIFO batch:63
114[ 0.021516] Normal zone: 53240 pages used for memmap
115[ 0.021517] Normal zone: 3407360 pages, LIFO batch:63
116[ 0.059443] Reserving Intel graphics memory at [mem 0xbd200000-0xbf1fffff]
117[ 0.059516] ACPI: PM-Timer IO Port: 0x1808
118[ 0.059518] ACPI: Local APIC address 0xfee00000
119[ 0.059525] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
120[ 0.059526] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
121[ 0.059526] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
122[ 0.059527] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
123[ 0.059527] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
124[ 0.059528] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
125[ 0.059528] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
126[ 0.059529] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
127[ 0.059539] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
128[ 0.059541] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
129[ 0.059543] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
130[ 0.059544] ACPI: IRQ0 used by override.
131[ 0.059545] ACPI: IRQ9 used by override.
132[ 0.059546] Using ACPI (MADT) for SMP configuration information
133[ 0.059548] ACPI: HPET id: 0x8086a201 base: 0xfed00000
134[ 0.059552] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
135[ 0.059567] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
136[ 0.059568] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
137[ 0.059568] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
138[ 0.059569] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
139[ 0.059569] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
140[ 0.059571] PM: Registered nosave memory: [mem 0xbab7f000-0xbbe7efff]
141[ 0.059571] PM: Registered nosave memory: [mem 0xbbe7f000-0xbbf7efff]
142[ 0.059572] PM: Registered nosave memory: [mem 0xbbf7f000-0xbbffefff]
143[ 0.059573] PM: Registered nosave memory: [mem 0xbc000000-0xbf1fffff]
144[ 0.059574] PM: Registered nosave memory: [mem 0xbf200000-0xdfffffff]
145[ 0.059574] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
146[ 0.059575] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
147[ 0.059575] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
148[ 0.059576] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
149[ 0.059576] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
150[ 0.059576] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
151[ 0.059577] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
152[ 0.059577] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
153[ 0.059578] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
154[ 0.059578] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
155[ 0.059579] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
156[ 0.059579] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
157[ 0.059580] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
158[ 0.059582] [mem 0xbf200000-0xdfffffff] available for PCI devices
159[ 0.059582] Booting paravirtualized kernel on bare hardware
160[ 0.059585] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
161[ 0.059590] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
162[ 0.059835] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
163[ 0.059841] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
164[ 0.059842] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
165[ 0.059867] Built 1 zonelists, mobility grouping on. Total pages: 4106849
166[ 0.059868] Policy zone: Normal
167[ 0.059869] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-23-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
168[ 0.060762] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
169[ 0.061174] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
170[ 0.061245] mem auto-init: stack:off, heap alloc:on, heap free:off
171[ 0.064661] Calgary: detecting Calgary via BIOS EBDA area
172[ 0.064662] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
173[ 0.105026] Memory: 16249832K/16688240K available (14339K kernel code, 2388K rwdata, 4728K rodata, 2668K init, 5056K bss, 438408K reserved, 0K cma-reserved)
174[ 0.105164] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
175[ 0.105175] Kernel/User page tables isolation: enabled
176[ 0.105188] ftrace: allocating 43210 entries in 169 pages
177[ 0.121474] rcu: Hierarchical RCU implementation.
178[ 0.121475] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
179[ 0.121476] Tasks RCU enabled.
180[ 0.121477] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
181[ 0.121477] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
182[ 0.124467] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
183[ 0.124689] random: crng done (trusting CPU's manufacturer)
184[ 0.124713] vt handoff: transparent VT on vt#7
185[ 0.124717] Console: colour dummy device 80x25
186[ 0.124722] printk: console [tty0] enabled
187[ 0.124736] ACPI: Core revision 20190703
188[ 0.124923] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
189[ 0.124935] APIC: Switch to symmetric I/O mode setup
190[ 0.125321] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
191[ 0.144934] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f48170b2a, max_idle_ns: 440795232642 ns
192[ 0.144938] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.77 BogoMIPS (lpj=9977540)
193[ 0.144940] pid_max: default: 32768 minimum: 301
194[ 0.144968] LSM: Security Framework initializing
195[ 0.144978] Yama: becoming mindful.
196[ 0.145017] AppArmor: AppArmor initialized
197[ 0.145076] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
198[ 0.145106] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
199[ 0.145257] *** VALIDATE proc ***
200[ 0.145305] *** VALIDATE cgroup1 ***
201[ 0.145306] *** VALIDATE cgroup2 ***
202[ 0.145353] mce: CPU0: Thermal monitoring enabled (TM1)
203[ 0.145364] process: using mwait in idle threads
204[ 0.145366] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
205[ 0.145367] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
206[ 0.145369] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
207[ 0.145370] Spectre V2 : Mitigation: Full generic retpoline
208[ 0.145371] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
209[ 0.145371] Spectre V2 : Enabling Restricted Speculation for firmware calls
210[ 0.145373] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
211[ 0.145373] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
212[ 0.145374] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
213[ 0.145377] MDS: Mitigation: Clear CPU buffers
214[ 0.145547] Freeing SMP alternatives memory: 36K
215[ 0.149005] TSC deadline timer enabled
216[ 0.149008] smpboot: CPU0: Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
217[ 0.149105] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
218[ 0.149121] ... version: 3
219[ 0.149122] ... bit width: 48
220[ 0.149122] ... generic registers: 4
221[ 0.149123] ... value mask: 0000ffffffffffff
222[ 0.149124] ... max period: 00007fffffffffff
223[ 0.149124] ... fixed-purpose events: 3
224[ 0.149125] ... event mask: 000000070000000f
225[ 0.149155] rcu: Hierarchical SRCU implementation.
226[ 0.150191] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
227[ 0.150270] smp: Bringing up secondary CPUs ...
228[ 0.150354] x86: Booting SMP configuration:
229[ 0.150355] .... node #0, CPUs: #1
230[ 0.151391] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
231[ 0.151391] #2 #3
232[ 0.153796] smp: Brought up 1 node, 4 CPUs
233[ 0.153796] smpboot: Max logical packages: 2
234[ 0.153796] smpboot: Total of 4 processors activated (19955.08 BogoMIPS)
235[ 0.154372] devtmpfs: initialized
236[ 0.154372] x86/mm: Memory block size: 128MB
237[ 0.157802] PM: Registering ACPI NVS region [mem 0xbbe7f000-0xbbf7efff] (1048576 bytes)
238[ 0.157802] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
239[ 0.157802] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
240[ 0.157802] pinctrl core: initialized pinctrl subsystem
241[ 0.157802] PM: RTC time: 02:20:53, date: 2019-11-21
242[ 0.157802] NET: Registered protocol family 16
243[ 0.157802] audit: initializing netlink subsys (disabled)
244[ 0.157802] audit: type=2000 audit(1574302853.032:1): state=initialized audit_enabled=0 res=1
245[ 0.157802] EISA bus registered
246[ 0.157802] cpuidle: using governor ladder
247[ 0.157802] cpuidle: using governor menu
248[ 0.157802] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
249[ 0.157802] ACPI: bus type PCI registered
250[ 0.157802] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
251[ 0.157802] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
252[ 0.157802] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
253[ 0.157802] PCI: Using configuration type 1 for base access
254[ 0.157802] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
255[ 0.157802] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
256[ 0.157802] mtrr: your CPUs had inconsistent variable MTRR settings
257[ 0.157802] mtrr: probably your BIOS does not setup all CPUs.
258[ 0.157802] mtrr: corrected configuration.
259[ 0.157907] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
260[ 0.157907] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
261[ 0.161019] ACPI: Added _OSI(Module Device)
262[ 0.161020] ACPI: Added _OSI(Processor Device)
263[ 0.161021] ACPI: Added _OSI(3.0 _SCP Extensions)
264[ 0.161022] ACPI: Added _OSI(Processor Aggregator Device)
265[ 0.161023] ACPI: Added _OSI(Linux-Dell-Video)
266[ 0.161024] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
267[ 0.161024] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
268[ 0.179668] ACPI: 7 ACPI AML tables successfully acquired and loaded
269[ 0.180977] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
270[ 0.186704] ACPI: Dynamic OEM Table Load:
271[ 0.186710] ACPI: SSDT 0xFFFF9E566D4F9800 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
272[ 0.187932] ACPI: Dynamic OEM Table Load:
273[ 0.187937] ACPI: SSDT 0xFFFF9E566D4A0000 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
274[ 0.190093] ACPI: Dynamic OEM Table Load:
275[ 0.190098] ACPI: SSDT 0xFFFF9E566D5D6A00 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
276[ 0.191962] ACPI: EC: EC started
277[ 0.191962] ACPI: EC: interrupt blocked
278[ 1.749855] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
279[ 1.749856] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
280[ 1.749858] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
281[ 1.749858] ACPI: Interpreter enabled
282[ 1.749888] ACPI: (supports S0 S3 S4 S5)
283[ 1.749889] ACPI: Using IOAPIC for interrupt routing
284[ 1.749913] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
285[ 1.750247] ACPI: Enabled 7 GPEs in block 00 to 3F
286[ 1.752325] ACPI: Power Resource [APPR] (off)
287[ 1.755493] ACPI: Power Resource [COMP] (on)
288[ 1.756173] ACPI: Power Resource [LPP] (on)
289[ 1.760082] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
290[ 1.760088] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
291[ 1.761453] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
292[ 1.763182] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
293[ 1.763183] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
294[ 1.763884] PCI host bridge to bus 0000:00
295[ 1.763886] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
296[ 1.763887] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
297[ 1.763888] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
298[ 1.763889] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window]
299[ 1.763890] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
300[ 1.763891] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window]
301[ 1.763892] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
302[ 1.763893] pci_bus 0000:00: root bus resource [bus 00-fe]
303[ 1.763902] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
304[ 1.764039] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
305[ 1.764049] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
306[ 1.764054] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
307[ 1.764058] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
308[ 1.764206] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
309[ 1.764215] pci 0000:00:03.0: reg 0x10: [mem 0xd0730000-0xd0733fff 64bit]
310[ 1.764365] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
311[ 1.764383] pci 0000:00:14.0: reg 0x10: [mem 0xd0720000-0xd072ffff 64bit]
312[ 1.764438] pci 0000:00:14.0: PME# supported from D3hot D3cold
313[ 1.764555] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
314[ 1.764575] pci 0000:00:16.0: reg 0x10: [mem 0xd0739000-0xd073900f 64bit]
315[ 1.764642] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
316[ 1.764759] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
317[ 1.764776] pci 0000:00:19.0: reg 0x10: [mem 0xd0700000-0xd071ffff]
318[ 1.764784] pci 0000:00:19.0: reg 0x14: [mem 0xd073f000-0xd073ffff]
319[ 1.764791] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
320[ 1.764852] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
321[ 1.764971] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
322[ 1.764992] pci 0000:00:1a.0: reg 0x10: [mem 0xd073e000-0xd073e3ff]
323[ 1.765077] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
324[ 1.765199] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
325[ 1.765218] pci 0000:00:1b.0: reg 0x10: [mem 0xd0734000-0xd0737fff 64bit]
326[ 1.765291] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
327[ 1.765406] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
328[ 1.765491] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
329[ 1.765669] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
330[ 1.765756] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
331[ 1.765927] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
332[ 1.766086] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
333[ 1.766256] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
334[ 1.766276] pci 0000:00:1d.0: reg 0x10: [mem 0xd073d000-0xd073d3ff]
335[ 1.766363] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
336[ 1.766485] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
337[ 1.766701] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
338[ 1.766717] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
339[ 1.766723] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
340[ 1.766729] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
341[ 1.766736] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
342[ 1.766743] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
343[ 1.766750] pci 0000:00:1f.2: reg 0x24: [mem 0xd073c000-0xd073c7ff]
344[ 1.766790] pci 0000:00:1f.2: PME# supported from D3hot
345[ 1.766901] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
346[ 1.766918] pci 0000:00:1f.3: reg 0x10: [mem 0xd0738000-0xd07380ff 64bit]
347[ 1.766937] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
348[ 1.767101] pci 0000:00:1c.0: PCI bridge to [bus 01]
349[ 1.767106] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
350[ 1.767192] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
351[ 1.767270] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0501fff 64bit]
352[ 1.767554] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
353[ 1.767755] pci 0000:00:1c.6: PCI bridge to [bus 02]
354[ 1.767760] pci 0000:00:1c.6: bridge window [mem 0xd0500000-0xd05fffff]
355[ 1.767859] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
356[ 1.767954] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd0400fff]
357[ 1.768290] pci 0000:03:00.0: supports D1 D2
358[ 1.768291] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
359[ 1.768469] pci 0000:00:1c.7: PCI bridge to [bus 03]
360[ 1.768474] pci 0000:00:1c.7: bridge window [mem 0xd0400000-0xd04fffff]
361[ 1.769793] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
362[ 1.769855] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
363[ 1.769914] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
364[ 1.769973] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
365[ 1.770031] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
366[ 1.770088] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
367[ 1.770146] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
368[ 1.770204] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
369[ 1.770612] ACPI: EC: interrupt unblocked
370[ 1.770619] ACPI: EC: event unblocked
371[ 1.770625] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
372[ 1.770627] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
373[ 1.770708] SCSI subsystem initialized
374[ 1.770708] libata version 3.00 loaded.
375[ 1.770708] pci 0000:00:02.0: vgaarb: setting as boot VGA device
376[ 1.770708] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
377[ 1.770708] pci 0000:00:02.0: vgaarb: bridge control possible
378[ 1.770708] vgaarb: loaded
379[ 1.770708] ACPI: bus type USB registered
380[ 1.770708] usbcore: registered new interface driver usbfs
381[ 1.770708] usbcore: registered new interface driver hub
382[ 1.770708] usbcore: registered new device driver usb
383[ 1.770708] pps_core: LinuxPPS API ver. 1 registered
384[ 1.770708] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
385[ 1.770708] PTP clock support registered
386[ 1.770708] EDAC MC: Ver: 3.0.0
387[ 1.770708] PCI: Using ACPI for IRQ routing
388[ 1.776155] PCI: pci_cache_line_size set to 64 bytes
389[ 1.776226] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
390[ 1.776227] e820: reserve RAM buffer [mem 0xbab7f000-0xbbffffff]
391[ 1.776228] e820: reserve RAM buffer [mem 0x43fe00000-0x43fffffff]
392[ 1.776332] NetLabel: Initializing
393[ 1.776332] NetLabel: domain hash size = 128
394[ 1.776333] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
395[ 1.776346] NetLabel: unlabeled traffic allowed by default
396[ 1.777535] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
397[ 1.777539] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
398[ 1.777958] clocksource: Switched to clocksource tsc-early
399[ 1.788728] VFS: Disk quotas dquot_6.6.0
400[ 1.788747] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
401[ 1.788776] *** VALIDATE hugetlbfs ***
402[ 1.788857] AppArmor: AppArmor Filesystem Enabled
403[ 1.788883] pnp: PnP ACPI init
404[ 1.789177] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
405[ 1.789178] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
406[ 1.789180] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
407[ 1.789181] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
408[ 1.789182] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
409[ 1.789183] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
410[ 1.789184] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
411[ 1.789185] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
412[ 1.789187] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
413[ 1.789188] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved
414[ 1.789193] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
415[ 1.789431] system 00:01: [io 0x0200-0x027f] has been reserved
416[ 1.789432] system 00:01: [io 0xffff] has been reserved
417[ 1.789434] system 00:01: [io 0xffff] has been reserved
418[ 1.789435] system 00:01: [io 0xffff] has been reserved
419[ 1.789436] system 00:01: [io 0x1800-0x18fe] has been reserved
420[ 1.789437] system 00:01: [io 0xef80-0xef9f] has been reserved
421[ 1.789440] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
422[ 1.789490] system 00:02: [io 0x0800-0x087f] has been reserved
423[ 1.789493] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
424[ 1.789513] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
425[ 1.790065] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
426[ 1.790516] pnp 00:05: [dma 0 disabled]
427[ 1.790577] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
428[ 1.790597] pnp 00:06: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
429[ 1.790615] pnp 00:07: Plug and Play ACPI device, IDs SYN3002 SYN0100 SYN0002 PNP0f13 (active)
430[ 1.790986] system 00:08: [mem 0x20000000-0x201fffff] could not be reserved
431[ 1.790987] system 00:08: [mem 0x40004000-0x40004fff] could not be reserved
432[ 1.790990] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
433[ 1.791262] pnp 00:09: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
434[ 1.791282] pnp: PnP ACPI: found 10 devices
435[ 1.792449] thermal_sys: Registered thermal governor 'fair_share'
436[ 1.792450] thermal_sys: Registered thermal governor 'bang_bang'
437[ 1.792451] thermal_sys: Registered thermal governor 'step_wise'
438[ 1.792451] thermal_sys: Registered thermal governor 'user_space'
439[ 1.792452] thermal_sys: Registered thermal governor 'power_allocator'
440[ 1.796945] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
441[ 1.796976] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
442[ 1.796978] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
443[ 1.796987] pci 0000:00:1c.7: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref]
444[ 1.796989] pci 0000:00:1c.7: BAR 13: assigned [io 0x2000-0x2fff]
445[ 1.796991] pci 0000:00:1c.0: PCI bridge to [bus 01]
446[ 1.796997] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
447[ 1.797004] pci 0000:00:1c.6: PCI bridge to [bus 02]
448[ 1.797007] pci 0000:00:1c.6: bridge window [mem 0xd0500000-0xd05fffff]
449[ 1.797014] pci 0000:00:1c.7: PCI bridge to [bus 03]
450[ 1.797017] pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff]
451[ 1.797021] pci 0000:00:1c.7: bridge window [mem 0xd0400000-0xd04fffff]
452[ 1.797024] pci 0000:00:1c.7: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref]
453[ 1.797030] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
454[ 1.797031] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
455[ 1.797032] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
456[ 1.797033] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window]
457[ 1.797034] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window]
458[ 1.797035] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window]
459[ 1.797036] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window]
460[ 1.797037] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
461[ 1.797038] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
462[ 1.797039] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
463[ 1.797040] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
464[ 1.797041] pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref]
465[ 1.797158] NET: Registered protocol family 2
466[ 1.797295] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
467[ 1.797378] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
468[ 1.797565] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
469[ 1.797666] TCP: Hash tables configured (established 131072 bind 65536)
470[ 1.797711] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
471[ 1.797755] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
472[ 1.797854] NET: Registered protocol family 1
473[ 1.797859] NET: Registered protocol family 44
474[ 1.797868] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
475[ 1.797877] pci 0000:00:14.0: enabling device (0000 -> 0002)
476[ 1.798743] PCI: CLS 64 bytes, default 64
477[ 1.798786] Trying to unpack rootfs image as initramfs...
478[ 1.918141] Freeing initrd memory: 50708K
479[ 1.918178] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
480[ 1.918180] software IO TLB: mapped [mem 0xb6b7f000-0xbab7f000] (64MB)
481[ 1.918382] check: Scanning for low memory corruption every 60 seconds
482[ 1.920214] Initialise system trusted keyrings
483[ 1.920223] Key type blacklist registered
484[ 1.920255] workingset: timestamp_bits=36 max_order=22 bucket_order=0
485[ 1.921510] zbud: loaded
486[ 1.921843] squashfs: version 4.0 (2009/01/31) Phillip Lougher
487[ 1.921986] fuse: init (API version 7.31)
488[ 1.922091] Platform Keyring initialized
489[ 1.927459] Key type asymmetric registered
490[ 1.927460] Asymmetric key parser 'x509' registered
491[ 1.927470] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
492[ 1.927512] io scheduler mq-deadline registered
493[ 1.927881] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
494[ 1.928134] pcieport 0000:00:1c.6: PME: Signaling with IRQ 25
495[ 1.928366] pcieport 0000:00:1c.7: PME: Signaling with IRQ 26
496[ 1.928387] pcieport 0000:00:1c.7: pciehp: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
497[ 1.928484] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
498[ 1.928542] vesafb: mode is 1024x768x32, linelength=4096, pages=0
499[ 1.928542] vesafb: scrolling: redraw
500[ 1.928544] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
501[ 1.928559] vesafb: framebuffer at 0xc0000000, mapped to 0x00000000f266c7fc, using 3072k, total 3072k
502[ 1.928626] Console: switching to colour frame buffer device 128x48
503[ 1.928639] fb0: VESA VGA frame buffer device
504[ 1.928652] intel_idle: MWAIT substates: 0x42120
505[ 1.928652] intel_idle: v0.4.1 model 0x3C
506[ 1.928830] intel_idle: lapic_timer_reliable_states 0xffffffff
507[ 1.929071] ACPI: AC Adapter [AC] (on-line)
508[ 1.929131] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
509[ 1.929138] ACPI: Sleep Button [SLPB]
510[ 1.929164] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
511[ 1.929169] ACPI: Lid Switch [LID]
512[ 1.929196] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
513[ 1.929208] ACPI: Power Button [PWRF]
514[ 1.954313] thermal LNXTHERM:00: registered as thermal_zone0
515[ 1.954315] ACPI: Thermal Zone [CPUZ] (44 C)
516[ 1.979689] thermal LNXTHERM:01: registered as thermal_zone1
517[ 1.979691] ACPI: Thermal Zone [GFXZ] (0 C)
518[ 1.994875] thermal LNXTHERM:02: registered as thermal_zone2
519[ 1.994877] ACPI: Thermal Zone [EXTZ] (37 C)
520[ 2.010098] thermal LNXTHERM:03: registered as thermal_zone3
521[ 2.010100] ACPI: Thermal Zone [LOCZ] (40 C)
522[ 2.026384] thermal LNXTHERM:04: registered as thermal_zone4
523[ 2.026386] ACPI: Thermal Zone [BATZ] (34 C)
524[ 2.026808] thermal LNXTHERM:05: registered as thermal_zone5
525[ 2.026809] ACPI: Thermal Zone [PCHZ] (114 C)
526[ 2.026983] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
527[ 2.047463] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
528[ 2.047990] battery: ACPI: Battery Slot [BAT0] (battery present)
529[ 2.049156] Linux agpgart interface v0.103
530[ 2.052988] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16)
531[ 2.071123] tpm tpm0: TPM is disabled/deactivated (0x7)
532[ 2.077418] loop: module loaded
533[ 2.077638] libphy: Fixed MDIO Bus: probed
534[ 2.077639] tun: Universal TUN/TAP device driver, 1.6
535[ 2.077683] PPP generic driver version 2.4.2
536[ 2.077742] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
537[ 2.077745] ehci-pci: EHCI PCI platform driver
538[ 2.077957] ehci-pci 0000:00:1a.0: EHCI Host Controller
539[ 2.077963] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
540[ 2.077973] ehci-pci 0000:00:1a.0: debug port 2
541[ 2.081875] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
542[ 2.081888] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd073e000
543[ 2.096996] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
544[ 2.097054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
545[ 2.097055] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
546[ 2.097056] usb usb1: Product: EHCI Host Controller
547[ 2.097057] usb usb1: Manufacturer: Linux 5.3.0-23-generic ehci_hcd
548[ 2.097058] usb usb1: SerialNumber: 0000:00:1a.0
549[ 2.097264] hub 1-0:1.0: USB hub found
550[ 2.097270] hub 1-0:1.0: 2 ports detected
551[ 2.097608] ehci-pci 0000:00:1d.0: EHCI Host Controller
552[ 2.097613] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
553[ 2.097623] ehci-pci 0000:00:1d.0: debug port 2
554[ 2.101526] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
555[ 2.101538] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000
556[ 2.116999] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
557[ 2.117062] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
558[ 2.117063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
559[ 2.117064] usb usb2: Product: EHCI Host Controller
560[ 2.117065] usb usb2: Manufacturer: Linux 5.3.0-23-generic ehci_hcd
561[ 2.117066] usb usb2: SerialNumber: 0000:00:1d.0
562[ 2.117269] hub 2-0:1.0: USB hub found
563[ 2.117275] hub 2-0:1.0: 2 ports detected
564[ 2.117449] ehci-platform: EHCI generic platform driver
565[ 2.117466] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
566[ 2.117469] ohci-pci: OHCI PCI platform driver
567[ 2.117478] ohci-platform: OHCI generic platform driver
568[ 2.117485] uhci_hcd: USB Universal Host Controller Interface driver
569[ 2.117675] xhci_hcd 0000:00:14.0: xHCI Host Controller
570[ 2.117679] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
571[ 2.118732] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
572[ 2.118737] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
573[ 2.118889] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
574[ 2.118890] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
575[ 2.118891] usb usb3: Product: xHCI Host Controller
576[ 2.118892] usb usb3: Manufacturer: Linux 5.3.0-23-generic xhci-hcd
577[ 2.118893] usb usb3: SerialNumber: 0000:00:14.0
578[ 2.119059] hub 3-0:1.0: USB hub found
579[ 2.119076] hub 3-0:1.0: 14 ports detected
580[ 2.119801] xhci_hcd 0000:00:14.0: xHCI Host Controller
581[ 2.119804] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
582[ 2.119807] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
583[ 2.119838] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
584[ 2.119839] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
585[ 2.119840] usb usb4: Product: xHCI Host Controller
586[ 2.119841] usb usb4: Manufacturer: Linux 5.3.0-23-generic xhci-hcd
587[ 2.119841] usb usb4: SerialNumber: 0000:00:14.0
588[ 2.120009] hub 4-0:1.0: USB hub found
589[ 2.120021] hub 4-0:1.0: 6 ports detected
590[ 2.120448] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
591[ 2.121668] i8042: Detected active multiplexing controller, rev 1.1
592[ 2.122318] serio: i8042 KBD port at 0x60,0x64 irq 1
593[ 2.122321] serio: i8042 AUX0 port at 0x60,0x64 irq 12
594[ 2.122342] serio: i8042 AUX1 port at 0x60,0x64 irq 12
595[ 2.122358] serio: i8042 AUX2 port at 0x60,0x64 irq 12
596[ 2.122373] serio: i8042 AUX3 port at 0x60,0x64 irq 12
597[ 2.122612] mousedev: PS/2 mouse device common for all mice
598[ 2.122841] rtc_cmos 00:03: RTC can wake from S4
599[ 2.122967] rtc_cmos 00:03: registered as rtc0
600[ 2.122981] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
601[ 2.122987] i2c /dev entries driver
602[ 2.123027] device-mapper: uevent: version 1.0.3
603[ 2.123074] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
604[ 2.123091] platform eisa.0: Probing EISA bus 0
605[ 2.123092] platform eisa.0: EISA: Cannot allocate resource for mainboard
606[ 2.123093] platform eisa.0: Cannot allocate resource for EISA slot 1
607[ 2.123094] platform eisa.0: Cannot allocate resource for EISA slot 2
608[ 2.123095] platform eisa.0: Cannot allocate resource for EISA slot 3
609[ 2.123096] platform eisa.0: Cannot allocate resource for EISA slot 4
610[ 2.123096] platform eisa.0: Cannot allocate resource for EISA slot 5
611[ 2.123097] platform eisa.0: Cannot allocate resource for EISA slot 6
612[ 2.123098] platform eisa.0: Cannot allocate resource for EISA slot 7
613[ 2.123099] platform eisa.0: Cannot allocate resource for EISA slot 8
614[ 2.123100] platform eisa.0: EISA: Detected 0 cards
615[ 2.123104] intel_pstate: Intel P-state driver initializing
616[ 2.123254] ledtrig-cpu: registered to indicate activity on CPUs
617[ 2.123478] NET: Registered protocol family 10
618[ 2.130596] Segment Routing with IPv6
619[ 2.130620] NET: Registered protocol family 17
620[ 2.130672] Key type dns_resolver registered
621[ 2.130882] RAS: Correctable Errors collector initialized.
622[ 2.130910] microcode: sig=0x306c3, pf=0x10, revision=0x27
623[ 2.130950] microcode: Microcode Update Driver: v2.2.
624[ 2.130958] sched_clock: Marking stable (2130662414, 284026)->(2137028592, -6082152)
625[ 2.131081] registered taskstats version 1
626[ 2.131094] Loading compiled-in X.509 certificates
627[ 2.132777] Loaded X.509 cert 'Build time autogenerated kernel key: 07a4a1230dee4da1426113ec42b8ee6ee56f4c4c'
628[ 2.132813] zswap: loaded using pool lzo/zbud
629[ 2.139313] Key type big_key registered
630[ 2.139317] Key type trusted registered
631[ 2.142311] Key type encrypted registered
632[ 2.142314] AppArmor: AppArmor sha1 policy hashing enabled
633[ 2.142323] ima: Allocated hash algorithm: sha1
634[ 2.144919] ima: Error Communicating to TPM chip
635[ 2.148033] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
636[ 2.148540] ima: Error Communicating to TPM chip
637[ 2.152167] ima: Error Communicating to TPM chip
638[ 2.156161] ima: Error Communicating to TPM chip
639[ 2.159666] ima: Error Communicating to TPM chip
640[ 2.163089] ima: Error Communicating to TPM chip
641[ 2.166054] ima: Error Communicating to TPM chip
642[ 2.169050] ima: Error Communicating to TPM chip
643[ 2.175579] No architecture policies found
644[ 2.175596] evm: Initialising EVM extended attributes:
645[ 2.175597] evm: security.selinux
646[ 2.175598] evm: security.SMACK64
647[ 2.175598] evm: security.SMACK64EXEC
648[ 2.175599] evm: security.SMACK64TRANSMUTE
649[ 2.175599] evm: security.SMACK64MMAP
650[ 2.175599] evm: security.apparmor
651[ 2.175600] evm: security.ima
652[ 2.175600] evm: security.capability
653[ 2.175601] evm: HMAC attrs: 0x1
654[ 2.176136] PM: Magic number: 11:90:309
655[ 2.176169] tty tty38: hash matches
656[ 2.176264] rtc_cmos 00:03: setting system clock to 2019-11-21T02:20:55 UTC (1574302855)
657[ 2.177378] Freeing unused decrypted memory: 2040K
658[ 2.177711] Freeing unused kernel image memory: 2668K
659[ 2.197036] Write protecting the kernel read-only data: 22528k
660[ 2.197468] Freeing unused kernel image memory: 2008K
661[ 2.197680] Freeing unused kernel image memory: 1416K
662[ 2.206015] x86/mm: Checked W+X mappings: passed, no W+X pages found.
663[ 2.206016] x86/mm: Checking user space page tables
664[ 2.213993] x86/mm: Checked W+X mappings: passed, no W+X pages found.
665[ 2.213994] Run /init as init process
666[ 2.300811] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
667[ 2.300811] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
668[ 2.301072] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
669[ 2.303995] i801_smbus 0000:00:1f.3: SPD Write Disable is set
670[ 2.304017] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
671[ 2.325401] ahci 0000:00:1f.2: version 3.0
672[ 2.325722] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
673[ 2.325755] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x37 impl SATA mode
674[ 2.325758] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
675[ 2.326057] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190703/utaddress-204)
676[ 2.326064] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
677[ 2.326067] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20190703/utaddress-204)
678[ 2.326071] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
679[ 2.326072] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20190703/utaddress-204)
680[ 2.326076] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20190703/utaddress-204)
681[ 2.326081] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
682[ 2.326082] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20190703/utaddress-204)
683[ 2.326085] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20190703/utaddress-204)
684[ 2.326090] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20190703/utaddress-204)
685[ 2.326094] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000080F (\IO_T) (20190703/utaddress-204)
686[ 2.326098] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
687[ 2.326099] lpc_ich: Resource conflict(s) found affecting gpio_ich
688[ 2.373627] scsi host0: ahci
689[ 2.373905] scsi host1: ahci
690[ 2.373989] scsi host2: ahci
691[ 2.374078] scsi host3: ahci
692[ 2.374170] scsi host4: ahci
693[ 2.374255] scsi host5: ahci
694[ 2.374303] ata1: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c100 irq 29
695[ 2.374305] ata2: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c180 irq 29
696[ 2.374307] ata3: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c200 irq 29
697[ 2.374308] ata4: DUMMY
698[ 2.374311] ata5: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c300 irq 29
699[ 2.374312] ata6: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c380 irq 29
700[ 2.374767] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
701[ 2.432990] usb 1-1: new high-speed USB device number 2 using ehci-pci
702[ 2.443418] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 64:51:06:08:94:c5
703[ 2.443421] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
704[ 2.443462] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
705[ 2.454047] e1000e 0000:00:19.0 enp0s25: renamed from eth0
706[ 2.461007] usb 3-7: new high-speed USB device number 2 using xhci_hcd
707[ 2.461027] usb 2-1: new high-speed USB device number 2 using ehci-pci
708[ 2.589445] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
709[ 2.589447] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
710[ 2.589711] hub 1-1:1.0: USB hub found
711[ 2.589775] hub 1-1:1.0: 6 ports detected
712[ 2.621441] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
713[ 2.621443] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
714[ 2.621707] hub 2-1:1.0: USB hub found
715[ 2.621770] hub 2-1:1.0: 8 ports detected
716[ 2.646082] usb 3-7: New USB device found, idVendor=04f2, idProduct=b3ed, bcdDevice=66.63
717[ 2.646084] usb 3-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
718[ 2.646086] usb 3-7: Product: HP HD Webcam
719[ 2.646087] usb 3-7: Manufacturer: Chicony Electronics Co.,Ltd.
720[ 2.646088] usb 3-7: SerialNumber: 200901010001
721[ 2.688076] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
722[ 2.690942] ata1.00: supports DRM functions and may not be fully accessible
723[ 2.692037] ata1.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT01B6Q, max UDMA/133
724[ 2.692039] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
725[ 2.694603] ata1.00: supports DRM functions and may not be fully accessible
726[ 2.697436] ata1.00: configured for UDMA/133
727[ 2.707819] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
728[ 2.708141] ata1.00: Enabling discard_zeroes_data
729[ 2.708146] sd 0:0:0:0: Attached scsi generic sg0 type 0
730[ 2.708184] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
731[ 2.708193] sd 0:0:0:0: [sda] Write Protect is off
732[ 2.708195] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
733[ 2.708208] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
734[ 2.708301] ata1.00: Enabling discard_zeroes_data
735[ 2.708573] sda: sda1
736[ 2.708759] ata1.00: Enabling discard_zeroes_data
737[ 2.709875] sd 0:0:0:0: [sda] supports TCG Opal
738[ 2.709876] sd 0:0:0:0: [sda] Attached SCSI disk
739[ 2.941007] tsc: Refined TSC clocksource calibration: 2494.212 MHz
740[ 2.941017] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3de46fc1, max_idle_ns: 440795267133 ns
741[ 2.941043] clocksource: Switched to clocksource tsc
742[ 3.024212] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
743[ 3.024665] ata2.00: supports DRM functions and may not be fully accessible
744[ 3.025957] ata2.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT01B6Q, max UDMA/133
745[ 3.025959] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
746[ 3.028731] ata2.00: supports DRM functions and may not be fully accessible
747[ 3.031866] ata2.00: configured for UDMA/133
748[ 3.042287] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5
749[ 3.042609] sd 1:0:0:0: Attached scsi generic sg1 type 0
750[ 3.042610] ata2.00: Enabling discard_zeroes_data
751[ 3.042652] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
752[ 3.042661] sd 1:0:0:0: [sdb] Write Protect is off
753[ 3.042664] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
754[ 3.042683] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
755[ 3.042775] ata2.00: Enabling discard_zeroes_data
756[ 3.043473] ata2.00: Enabling discard_zeroes_data
757[ 3.044598] sd 1:0:0:0: [sdb] supports TCG Opal
758[ 3.044599] sd 1:0:0:0: [sdb] Attached SCSI disk
759[ 3.123240] psmouse serio3: synaptics: queried max coordinates: x [..5658], y [..4746]
760[ 3.158816] psmouse serio3: synaptics: queried min coordinates: x [1368..], y [1240..]
761[ 3.158824] psmouse serio3: synaptics: Your touchpad (PNP: SYN3002 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
762[ 3.219065] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2759, fw id: 1499454
763[ 3.263518] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10
764[ 3.356311] ata3: SATA link down (SStatus 0 SControl 300)
765[ 3.672342] ata5: SATA link down (SStatus 0 SControl 300)
766[ 3.988363] ata6: SATA link down (SStatus 0 SControl 300)
767[ 4.375012] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
768[ 4.490274] systemd[1]: Inserted module 'autofs4'
769[ 4.501709] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
770[ 4.521144] systemd[1]: Detected architecture x86-64.
771[ 4.522710] systemd[1]: Set hostname to <probook>.
772[ 4.523312] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
773[ 4.597393] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
774[ 4.648040] systemd[1]: Listening on Journal Audit Socket.
775[ 4.648151] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
776[ 4.648775] systemd[1]: Listening on Syslog Socket.
777[ 4.648788] systemd[1]: Reached target Remote File Systems.
778[ 4.648869] systemd[1]: Listening on udev Control Socket.
779[ 4.673213] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
780[ 4.694126] lp: driver loaded but no devices found
781[ 4.698069] ppdev: user-space parallel port driver
782[ 4.700402] parport_pc 00:05: reported by Plug and Play ACPI
783[ 4.700470] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
784[ 4.797163] lp0: using parport0 (interrupt-driven).
785[ 5.062713] systemd-journald[356]: Received request to flush runtime journal from PID 1
786[ 5.072997] input: HP Wireless hotkeys as /devices/virtual/input/input12
787[ 5.076114] hp_accel: hardware type HPB65xx found
788[ 5.106632] EDAC ie31200: No ECC support
789[ 5.160393] cfg80211: Loading compiled-in X.509 certificates for regulatory database
790[ 5.184015] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
791[ 5.278292] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
792[ 5.278295] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
793[ 5.278295] RAPL PMU: hw unit of domain package 2^-14 Joules
794[ 5.278296] RAPL PMU: hw unit of domain dram 2^-14 Joules
795[ 5.278297] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
796[ 5.280133] Intel(R) Wireless WiFi driver for Linux
797[ 5.280134] Copyright(c) 2003- 2015 Intel Corporation
798[ 5.288470] cryptd: max_cpu_qlen set to 1000
799[ 5.309458] AVX2 version of gcm_enc/dec engaged.
800[ 5.309460] AES CTR mode by8 optimization enabled
801[ 5.314518] mc: Linux media interface: v0.10
802[ 5.331274] lis3lv02d: 8 bits 3DC sensor found
803[ 5.331876] videodev: Linux video capture interface: v2.00
804[ 5.336322] hp_wmi: query 0xd returned error 0x5
805[ 5.336389] input: HP WMI hotkeys as /devices/virtual/input/input13
806[ 5.344984] iwlwifi 0000:02:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm
807[ 5.376695] uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b3ed)
808[ 5.392450] uvcvideo 3-7:1.0: Entity type for entity Extension 5 was not initialized!
809[ 5.392454] uvcvideo 3-7:1.0: Entity type for entity Extension 2 was not initialized!
810[ 5.392455] uvcvideo 3-7:1.0: Entity type for entity Processing 3 was not initialized!
811[ 5.392457] uvcvideo 3-7:1.0: Entity type for entity Camera 1 was not initialized!
812[ 5.393989] checking generic (c0000000 300000) vs hw (c0000000 10000000)
813[ 5.393991] fb0: switching to inteldrmfb from VESA VGA
814[ 5.395243] input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input14
815[ 5.395343] usbcore: registered new interface driver uvcvideo
816[ 5.395344] USB Video Class driver (1.1.1)
817[ 5.395433] Console: switching to colour dummy device 80x25
818[ 5.395488] i915 0000:00:02.0: vgaarb: deactivate vga console
819[ 5.396615] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
820[ 5.396616] [drm] Driver supports precise vblank timestamp query.
821[ 5.397023] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
822[ 5.400057] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
823[ 5.412616] audit: type=1400 audit(1574302858.728:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=557 comm="apparmor_parser"
824[ 5.414766] audit: type=1400 audit(1574302858.732:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=558 comm="apparmor_parser"
825[ 5.417321] audit: type=1400 audit(1574302858.736:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=559 comm="apparmor_parser"
826[ 5.419595] audit: type=1400 audit(1574302858.736:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=561 comm="apparmor_parser"
827[ 5.421465] audit: type=1400 audit(1574302858.740:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=556 comm="apparmor_parser"
828[ 5.423297] iwlwifi 0000:02:00.0: base HW address: a0:a8:cd:88:7f:bb
829[ 5.424870] audit: type=1400 audit(1574302858.740:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=566 comm="apparmor_parser"
830[ 5.428046] audit: type=1400 audit(1574302858.744:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=563 comm="apparmor_parser"
831[ 5.428052] audit: type=1400 audit(1574302858.744:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=563 comm="apparmor_parser"
832[ 5.428426] audit: type=1400 audit(1574302858.744:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=572 comm="apparmor_parser"
833[ 5.433279] audit: type=1400 audit(1574302858.752:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=569 comm="apparmor_parser"
834[ 5.515437] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
835[ 5.524105] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
836[ 5.633400] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
837[ 5.704927] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
838[ 5.738438] fbcon: i915drmfb (fb0) is primary device
839[ 5.738527] Console: switching to colour frame buffer device 170x48
840[ 5.738551] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
841[ 5.947138] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
842[ 5.947141] snd_hda_codec_idt hdaudioC1D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
843[ 5.947143] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
844[ 5.947144] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0
845[ 5.947145] snd_hda_codec_idt hdaudioC1D0: inputs:
846[ 5.947147] snd_hda_codec_idt hdaudioC1D0: Mic=0xc
847[ 5.947148] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11
848[ 5.947150] snd_hda_codec_idt hdaudioC1D0: Line=0xf
849[ 5.994854] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
850[ 5.994923] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
851[ 5.994995] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
852[ 5.995057] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
853[ 6.040289] iwlwifi 0000:02:00.0 wlo1: renamed from wlan0
854[ 6.067562] intel_rapl_common: Found RAPL domain package
855[ 6.067564] intel_rapl_common: Found RAPL domain core
856[ 6.067565] intel_rapl_common: Found RAPL domain uncore
857[ 6.067566] intel_rapl_common: Found RAPL domain dram
858[ 6.246728] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
859[ 6.270244] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
860[ 6.270308] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
861[ 6.270365] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
862[ 6.270421] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
863[ 6.270474] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
864[ 6.377102] Adding 999420k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:999420k SSFS
865[ 7.010534] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input25
866[ 10.691782] rfkill: input handler disabled
867[ 11.405796] wlo1: authenticate with 5e:f4:ab:39:e7:44
868[ 11.408378] wlo1: send auth to 5e:f4:ab:39:e7:44 (try 1/3)
869[ 11.410427] wlo1: authenticated
870[ 11.413019] wlo1: associate with 5e:f4:ab:39:e7:44 (try 1/3)
871[ 11.417194] wlo1: RX AssocResp from 5e:f4:ab:39:e7:44 (capab=0xc11 status=0 aid=6)
872[ 11.418600] wlo1: associated
873[ 11.640519] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
874[ 31.544371] PM: suspend entry (deep)
875[ 31.549931] Filesystems sync: 0.005 seconds
876[ 31.550337] Freezing user space processes ... (elapsed 0.767 seconds) done.
877[ 32.317965] OOM killer disabled.
878[ 32.317967] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
879[ 32.319394] printk: Suspending console(s) (use no_console_suspend to debug)
880[ 32.349896] wlo1: deauthenticating from 5e:f4:ab:39:e7:44 by local choice (Reason: 3=DEAUTH_LEAVING)
881[ 32.373268] sd 0:0:0:0: [sda] Synchronizing SCSI cache
882[ 32.373348] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
883[ 32.374003] sd 1:0:0:0: [sdb] Stopping disk
884[ 32.377025] sd 0:0:0:0: [sda] Stopping disk
885[ 32.441026] parport_pc 00:05: disabled
886[ 32.442193] serial 00:04: disabled
887[ 32.442879] e1000e: EEE TX LPI TIMER: 00000011
888[ 32.598035] ACPI: EC: interrupt blocked
889[ 32.617792] ACPI: Preparing to enter system sleep state S3
890[ 32.620571] ACPI: EC: event blocked
891[ 32.620572] ACPI: EC: EC stopped
892[ 32.620573] PM: Saving platform NVS memory
893[ 32.620599] Disabling non-boot CPUs ...
894[ 32.621225] IRQ 32: no longer affine to CPU1
895[ 32.622920] smpboot: CPU 1 is now offline
896[ 32.627421] IRQ 33: no longer affine to CPU2
897[ 32.628467] smpboot: CPU 2 is now offline
898[ 32.632695] IRQ 16: no longer affine to CPU3
899[ 32.633732] smpboot: CPU 3 is now offline
900[ 32.638374] ACPI: Low-level resume complete
901[ 32.638421] ACPI: EC: EC started
902[ 32.638422] PM: Restoring platform NVS memory
903[ 32.641147] Enabling non-boot CPUs ...
904[ 32.641194] x86: Booting SMP configuration:
905[ 32.641195] smpboot: Booting Node 0 Processor 1 APIC 0x1
906[ 32.641889] CPU1 is up
907[ 32.641924] smpboot: Booting Node 0 Processor 2 APIC 0x2
908[ 32.644024] CPU2 is up
909[ 32.644056] smpboot: Booting Node 0 Processor 3 APIC 0x3
910[ 32.644837] CPU3 is up
911[ 32.647747] ACPI: Waking up from system sleep state S3
912[ 32.790804] ACPI: EC: interrupt unblocked
913[ 32.831931] ACPI: EC: event unblocked
914[ 32.842042] sd 0:0:0:0: [sda] Starting disk
915[ 32.842085] sd 1:0:0:0: [sdb] Starting disk
916[ 33.070364] usb 3-7: reset high-speed USB device number 2 using xhci_hcd
917[ 33.205438] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
918[ 33.205482] ata5: SATA link down (SStatus 0 SControl 300)
919[ 33.205528] ata6: SATA link down (SStatus 0 SControl 300)
920[ 33.205567] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
921[ 33.205595] ata3: SATA link down (SStatus 0 SControl 300)
922[ 33.206456] ata2.00: supports DRM functions and may not be fully accessible
923[ 33.206490] ata1.00: supports DRM functions and may not be fully accessible
924[ 33.211190] ata1.00: supports DRM functions and may not be fully accessible
925[ 33.212911] ata2.00: supports DRM functions and may not be fully accessible
926[ 33.214677] ata1.00: configured for UDMA/133
927[ 33.216099] ata2.00: configured for UDMA/133
928[ 33.224958] ata1.00: Enabling discard_zeroes_data
929[ 33.227013] ata2.00: Enabling discard_zeroes_data
930[ 34.539062] serial 00:04: activated
931[ 34.543134] parport_pc 00:05: activated
932[ 34.543175] tpm tpm0: tpm_try_transmit: send(): error -5
933[ 34.548069] OOM killer enabled.
934[ 34.548070] Restarting tasks ... done.
935[ 35.048583] wlo1: authenticate with 5e:f4:ab:39:e7:44
936[ 35.051579] wlo1: send auth to 5e:f4:ab:39:e7:44 (try 1/3)
937[ 35.053687] wlo1: authenticated
938[ 35.058204] wlo1: associate with 5e:f4:ab:39:e7:44 (try 1/3)
939[ 35.062461] wlo1: RX AssocResp from 5e:f4:ab:39:e7:44 (capab=0xc11 status=0 aid=4)
940[ 35.064273] wlo1: associated
941[ 35.328030] psmouse serio3: synaptics: queried max coordinates: x [..5658], y [..4746]
942[ 35.364086] psmouse serio3: synaptics: queried min coordinates: x [1368..], y [1240..]
943[ 35.923429] PM: suspend exit
944[ 36.056734] e1000e: enp0s25 NIC Link is Down
945[ 36.059671] wlo1: deauthenticating from 5e:f4:ab:39:e7:44 by local choice (Reason: 3=DEAUTH_LEAVING)
946[ 39.790463] wlo1: authenticate with 5e:f4:ab:39:e7:44
947[ 39.792751] wlo1: send auth to 5e:f4:ab:39:e7:44 (try 1/3)
948[ 39.795048] wlo1: authenticated
949[ 39.798189] wlo1: associate with 5e:f4:ab:39:e7:44 (try 1/3)
950[ 39.802346] wlo1: RX AssocResp from 5e:f4:ab:39:e7:44 (capab=0xc11 status=0 aid=4)
951[ 39.804388] wlo1: associated
952[ 40.047613] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
953[ 41.378769] rfkill: input handler enabled
954[ 44.153048] rfkill: input handler disabled