X7jXqBWY

1972   proc options; run;
2
3    SAS (r) Proprietary Software Release 9.4  TS1M1
4
5
6Portable Options:
7
8 ANIMATION=STOP    Specifies whether to start or stop animation.
9 ANIMDURATION=MIN  Specifies the number of seconds that each animation frame displays.
10 ANIMLOOP=YES      Specifies the number of iterations that animated images repeat.
11 ANIMOVERLAY       Specifies that animation frames are overlaid in order to view all frames.
12 APPEND=           Specifies an option=value pair to insert the value at the end of the existing
13                   option value.
14 APPLETLOC=        Specifies the location of Java applets, which is typically a URL.
15 ARMAGENT=         Specifies an ARM agent (which is an executable module or keyword, such as LOG4SAS)
16                   that contains a specific implementation of the ARM API.
17 ARMLOC=ARMLOG.LOG Specifies the location of the ARM log.
18 ARMSUBSYS=(ARM_NONE)
19                   Specifies the SAS ARM subsystems to enable or disable.
20 AUTOCORRECT       Automatically corrects misspelled procedure names and keywords, and global
21                   statement names.
22 AUTOEXEC=         Specifies the location of the SAS AUTOEXEC files.
23 AUTOSAVELOC=      Specifies the location of the Program Editor auto-saved file.
24 NOAUTOSIGNON      Disables a SAS/CONNECT client from automatically submitting the SIGNON command
25                   remotely with the RSUBMIT command.
26 BINDING=DEFAULT   Specifies the binding edge type of duplexed printed output.
27 BOMFILE           Writes the byte order mark (BOM) prefix when a Unicode-encoded file is written to
28                   an external file.
29 BOTTOMMARGIN=0.000 IN
30                   Specifies the size of the margin at the bottom of a printed page.
31 BUFNO=1           Specifies the number of buffers for processing SAS data sets.
32 BUFSIZE=0         Specifies the size of a buffer page for output SAS data sets.
33 BYERR             SAS issues an error message and stops processing if the SORT procedure attempts to
34                   sort a _NULL_ data set.
35 BYLINE            Prints the BY line above each BY group.
36 BYSORTED          Requires observations in one or more data sets to be sorted in alphabetic or
37                   numeric order.
38 NOCAPS            Does not convert certain types of input, and all data lines, into uppercase
39                   characters.
40 NOCARDIMAGE       Does not process SAS source code and data lines as 80-byte records.
41 CATCACHE=0        Specifies the number of SAS catalogs to keep open in cache memory.
42 CBUFNO=0          Specifies the number of extra page buffers to allocate for each open SAS catalog.
43 CENTER            Center SAS procedure output.
44 CGOPTIMIZE=3      Specifies the level of optimization to perform during code compilation.
45 NOCHARCODE        Does not substitute specific keyboard combinations for special characters that are
46                   not on the keyboard.
47 NOCHKPTCLEAN      Does not erase files in the Work library after a batch program successfully
48                   executes in checkpoint mode or restart mode.
49 CLEANUP           Performs automatic continuous cleanup of non-essential resources in
50                   out-of-resource conditions.
51 NOCMDMAC          Does not check window environment commands for command-style macros.
52 CMPLIB=sasuser.funcs
53                   Specifies one or more SAS data sets that contain compiler subroutines to include
54                   during compilation.
55 CMPMODEL=BOTH     Specifies the output model type for the MODEL procedure.
56 CMPOPT=(NOEXTRAMATH NOMISSCHECK NOPRECISE NOGUARDCHECK NOGENSYMNAMES NOFUNCDIFFERENCING)
57                   Specifies the type of code-generation optimizations to use in the SAS language
58                   compiler.
59 NOCOLLATE         Does not collate multiple copies of printed output.
60 COLOPHON=         Specifies the comment text that is included in graphic stream files.
61 COLORPRINTING     Prints in color if color printing is supported.
62 COMAMID=TCP       Specifies the communication access method for connecting client and server
63                   sessions across a network.
64 COMPRESS=NO       Specifies the type of compression to use for observations in output SAS data sets.
65 NOCONNECTEVENTS   Clients do not receive SAS events propagated from a SAS/CONNECT server.
66 CONNECTMETACONNECTION
67                   At sign-on, connects the SAS/CONNECT server to the SAS Metadata server.
68 CONNECTOUTPUT=BUFFERED
69                   Specifies whether to send the SAS/CONNECT server log and list output immediately,
70                   or to buffer the output.
71 CONNECTPERSIST    Continues a client/server connection after an RSUBMIT statement has completed.
72 CONNECTREMOTE=X1242ACB
73                   Specifies the ID of a specific server session that a client connects to.
74 CONNECTSTATUS     Displays the Transfer Status window during file transfers.
75 CONNECTWAIT       Executes RSUBMIT statements synchronously.
76 COPIES=1          Specifies the number of copies to print.
77 CPUCOUNT=4        Specifies the number of processors that thread-enabled applications should assume
78                   are available for concurrent processing.
79 CPUID             Prints the CPU identification number at the beginning of the SAS log.
80 CSTGLOBALLIB=     Specifies the location of the SAS Clinical Standards Toolkit global library.
81 CSTSAMPLELIB=     Specifies the location of the SAS Clinical Standards Toolkit sample library.
82 DATAPAGESIZE=CURRENT
83                   Specifies whether the page size for a data set or utility file is compatible with
84                   SAS 9.3 processing, or is determined by the current version of SAS.
85 DATASTMTCHK=COREKEYWORDS
86                   Specifies which SAS statement keywords are prohibited from being specified as a
87                   one-level DATA step name to protect against overwriting an input data set.
88 DATE              Prints the date and time that a SAS program started.
89 DATESTYLE=DMY     Specifies the sequence of month, day, and year when ANYDTDTE, ANYDTDTM, or
90                   ANYDTTME informat data is ambiguous.
91 NODBFMTIGNORE     Uses the numeric data type in tables.
92 NODBIDIRECTEXEC   The SQL pass-through facility does not optimize the handling of SQL statements.
93 DBSLICEPARM=(THREADED_APPS, 2)
94                   Specifies whether SAS procedures, applications, and the DATA step can read DBMS
95                   tables in parallel, and the number of threads to use to read the DBMS tables.
96 DBSRVTP=NONE      Specifies whether SAS/ACCESS engines hold or block the originating client while
97                   making performance-critical calls to the database.
98 DCSHOST=LOCALHOST Specifies the host name of the SAS Document Conversion Server.
99 DCSPORT=7111      Specifies the port number of the SAS Document Conversion Server.
100 DECIMALCONV=COMPATIBLE
101                   Specifies the binary to decimal conversion and formatting methodology.
102 DEFLATION=6       Specifies the level of compression for device drivers that support the Deflate
103                   compression algorithm.
104 NODETAILS         Does not display additional information when files are listed in a SAS library.
105 DEVICE=           Specifies the device driver to which SAS/GRAPH sends procedure output.
106 DFLANG=RUSSIAN    Specifies the language for international date informats and formats.
107 DKRICOND=ERROR    Specifies the error level to report when a variable is missing from an input data
108                   set during the processing of a DROP=, KEEP=, or RENAME= data set option.
109 DKROCOND=WARN     Specifies the error level to report when a variable is missing from an output data
110                   set during the processing of a DROP=, KEEP=, or RENAME= data set option.
111 NODLCREATEDIR     Does not create a directory for the SAS library that is named in a LIBNAME
112                   statement when the directory does not already exist.
113 DLDMGACTION=REPAIR
114                   Specifies the type of action to take when a SAS data set or a SAS catalog is
115                   detected as damaged.
116 NODMR             Does not invoke a server session for use with a SAS/CONNECT client.
117 DMS               Starts SAS using the windowing environment and displays the Log window, the Editor
118                   window, and the Output window.
119 DMSEXP            Starts SAS and displays Explorer, Editor, Log, Output, and Results windows.
120 DMSLOGSIZE=99999  Specifies the maximum number of rows that the SAS Log window can display.
121 DMSOUTSIZE=2147483647
122                   Specifies the maximum number of rows that the SAS Output window can display.
123 DMSPGMLINESIZE=136
124                   Specifies the maximum number of characters in a Program Editor line.
125 NODMSSYNCHK       Disables syntax check mode for DATA step and PROC step processing in the windowing
126                   environment.
127 DQLOCALE=         Specifies the Data Quality Server ordered list of locales for data cleansing.
128 DQOPTIONS=        Specifies the SAS session parameters for data quality programs.
129 DQSETUPLOC=       Specifies the location of the Quality Knowledge Base root directory.
130 DS2ACCEL=NONE     Provides support for DS2 code pass-through acceleration.
131 DS2SCOND=WARN     Specifies the type of message that PROC DS2 generates.
132 DSACCEL=NONE      Provides support for code pass-through acceleration.
133 DSNFERR           Issues an error message and stops processing when a SAS data set cannot be found.
134 NODTRESET         SAS does not update the date and time in the titles of the SAS log and procedure
135                   output file.
136 NODUPLEX          Does not print output using duplex (two-sided) printing.
137 NOECHOAUTO        Does not write statements that are in the AUTOEXEC file to the SAS log as they are
138                   executed.
139 EMAILACKWAIT=30   Specifies the number of seconds to wait for the SMTP server acknowledgement.
140 EMAILAUTHPROTOCOL=NONE
141                   Specifies the SMTP e-mail authentication protocol.
142 NOEMAILFROM       Does not require the FROM e-mail option when sending e-mail by using the FILE or
143                   FILENAME statements.
144 EMAILHOST=LOCALHOST
145                   Specifies one or more domain names for SMTP e-mail servers.
146 EMAILID=          Specifies the SAS user's logon ID, profile or e-mail address.
147 EMAILPORT=25      Specifies the port number for the SMTP e-mail server that is specified in the
148                   EMAILHOST option.
149 EMAILPW=XXXXXXXX  Specifies the password for the e-mail address specified by the EMAILID option.
150 EMAILUTCOFFSET=   For SMTP e-mail sent using the FILENAME statement, specifies a UTC offset that is
151                   used in the Date header field of the e-mail message.
152 NOENCRYPTFIPS     Does not limit SAS/SECURE and SSL security services to use FIPS 140-2 algorithms.
153 ENGINE=V9         Specifies the default access method for SAS libraries.
154 NOERRORABEND      Does not end SAS for most errors, issues an error message, sets OBS=0, and goes
155                   into syntax check mode.
156 NOERRORBYABEND    Does not end a SAS program when an error occurs in BY-group processing, issues an
157                   error, and continues processing.
158 ERRORCHECK=NORMAL Specifies whether SAS enters syntax-check mode when errors are found in the
159                   LIBNAME, FILENAME,  %INCLUDE, and LOCK statements.
160 ERRORS=20         Specifies the maximum number of observations for which SAS issues complete error
161                   messages.
162 EVENTDS=(DEFAULTS)
163                   Specifies one or more data sets that define custom holiday events.
164 NOEXPLORER        Does not invoke Explorer and the Program Editor when SAS starts.
165 EXTENDOBSCOUNTER=YES
166                   Specifies whether to extend the maximum number of observations in a new SAS data
167                   file.
168 FILESYNC=HOST     Specifies when operating system buffers that contain contents of permanent SAS
169                   files are written to disk.
170 FIRSTOBS=1        Specifies the observation number or external file record that SAS processes first.
171 NOFMTERR          Issues a note for missing variable formats, uses w. or $w., and continues
172                   processing.
173 FMTSEARCH=(WORK LIBRARY)
174                   Specifies the order in which format catalogs are searched.
175 FONTEMBEDDING     Enables font embedding for Universal Printing and SAS/GRAPH printing.
176 FONTRENDERING=FREETYPE_POINTS
177                   Specifies whether some SAS/GRAPH devices render fonts by using the operating
178                   system or by using the Free Type engine.
179 FONTSLOC=         Specifies the location of the fonts that are supplied by SAS. Names the default
180                   font file location for registering fonts that use the FONTREG procedure.
181 FORMCHAR=|----|+|---+=|-/\<>*
182                   Specifies the default output formatting characters.
183 FORMDLIM=         Specifies the character to delimit page breaks in SAS output for the LISTING
184                   destination.
185 FORMS=DEFAULT     If forms are used for printing, specifies the default form to use.
186 GSTYLE            Uses ODS styles to generate graphs that are stored as GRSEG catalog entries.
187 GWINDOW           Displays SAS/GRAPH output in the GRAPH window.
188 HELPADDR=         Specifies the address of the remote Help system.
189 HELPBROWSER=SAS   Specifies the browser to use for SAS Help and ODS output.
190 HELPENCMD         Uses the English version of the keyword list for the command-line Help.
191 HELPHOST=         Specifies the name of the computer where the remote browser is to send Help and
192                   ODS output.
193 HELPINDEX=(/help/common.hlp/index.txt /help/common.hlp/keywords.htm common.hhk)
194                   Specifies one or more index files for SAS Help and Documentation.
195 HELPPORT=0        Specifies the port number for the remote browser client.
196 HELPTOC=(/help/helpnav.hlp/navigation.xml /help/common.hlp/toc.htm common.hhc)
197                   Specifies the table of contents files for the online SAS Help and Documentation.
198 HOSTINFOLONG      Print operating environment information in the SAS log when SAS starts.
199 HTTPSERVERPORTMAX=0
200                   Specifies the highest port number that can be used by the SAS HTTP server for
201                   remote browsing.
202 HTTPSERVERPORTMIN=0
203                   Specifies the lowest port number that can be used by the SAS HTTP server for
204                   remote browsing.
205 IBUFNO=0          Specifies the number of extra buffers to be allocated for navigating an index file.
206 IBUFSIZE=0        Specifies the buffer page size for an index file.
207 NOIMPLMAC         Does not check for statement-style macros.
208 INITCMD=          Specifies commands to open applications, or windows and text editor commands,
209                   after SAS executes the AUTOEXEC= file and the INITSTMT= value.
210 INITSTMT=         Specifies SAS statements to execute after any statements in the AUTOEXEC= file and
211                   before any statements from the SYSIN= file.
212 INSERT=           Specifies an option=value pair to insert the value at the beginning of the
213                   existing option value.
214 INTERVALDS=       Specifies interval=library pairs.  Library is a SAS data set that contains a
215                   custom interval data set; interval can be used in the INTNX and INTCK functions.
216 INVALIDDATA=.     Specifies the value that SAS assigns to a variable when invalid numeric data is
217                   encountered.
218 NOIPADDRESS       Disables the IP address to appear in SAS/CONNECT messages when using TCP/IP.
219 JPEGQUALITY=75    Specifies the JPEG quality factor that determines the ratio of image quality to
220                   the level of compression for JPEG files produced by the JPEG device driver.
221 LABEL             Enables procedures to use labels with variables.
222 NOLABELCHKPT      For batch programs, disables the recording of checkpoint-restart data for labeled
223                   code sections.
224 LABELCHKPTLIB=WORK
225                   Specifies the libref of the library where the checkpoint-restart data is saved for
226                   labeled code sections.
227 NOLABELRESTART    Disables restart mode, which executes batch programs using checkpoint-restart data
228                   collected at labeled code sections.
229 LEFTMARGIN=0.000 IN
230                   Specifies the print margin for the left side of the page.
231 LINESIZE=102      Specifies the line size for the SAS log and for SAS procedure output for the
232                   LISTING destination.
233 LOCALEDATA=SASLOCALE
234                   Specifies the location of the locale database.
235 NOLOCKDOWN        Specifies that access to files and certain SAS features will not be restricted.
236                   This feature is only applicable for a SAS session executing in a batch or server
237                   processing mode.
238 LOGAPPLNAME=      Specifies a SAS session name for SAS logging.
239 LOGCONFIGLOC=     Specifies the name of the XML configuration file or a basic logging configuration
240                   that is used to initialize the SAS logging facility.
241 NOLOGLANGCHG      Disables changing the language of the SAS output when the LOCALE= option is
242                   changed.
243 NOLOGLANGENG      Write SAS log messages based on the values of the LOGLANGCHG, LSWLANG=, and
244                   LOCALE= options when SAS started.
245 LOGPARM=WRITE=BUFFERED ROLLOVER=NONE OPEN=REPLACE
246                   Specifies when SAS log files are opened, closed, and according to the LOG= system
247                   option, how they are named.
248 LRECL=32767       Specifies the default logical record length to use for reading and writing
249                   external files.
250 LSWLANG=LOCALE    Specifies the language for SAS log and ODS messages when the LOCALE= option is set
251                   after SAS starts.
252 MACRO             Enables the macro facility.
253 MAPEBCDICTOASCII= Specifies the transcoding table that is used to convert characters from ASCII to
254                   EBCDIC and EBCDIC to ASCII.
255 MAPS=MAPS         Specifies the location of SAS/GRAPH map data sets.
256 MAPSGFK=          Specifies the location of GfK maps.
257 MAPSSAS=          Specifies the location of SAS map data sets.
258 NOMAUTOCOMPLOC    Does not display the autocall macro source location in the SAS log when the
259                   autocall macro is compiled.
260 NOMAUTOLOCDISPLAY Disables the macro facility from displaying the autocall macro source location in
261                   the log.
262 NOMAUTOLOCINDES   Does not prepend the full pathname of the autocall macro source file to the
263                   autocall macro catalog entry description field in the WORK.SASMACR catalog.
264 MAUTOSOURCE       Enables the macro autocall feature.
265 MAXSEGRATIO=75    Specifies the upper limit for the percentage of index segments that the SPD Engine
266                   identifies as containing the value referenced in the WHERE expression.
267 MCOMPILE          Allows new macro definitions.
268 MCOMPILENOTE=NONE Specifies what to write to the SAS log when a macro compiles successfully.
269 NOMCOVERAGE       Disables the generation of coverage analysis data for SAS macros.
270 MCOVERAGELOC=     Specifies the location of the macro coverage analysis data file.
271 MERGENOBY=NOWARN  Specifies the type of message that is issued when MERGE processing occurs without
272                   an associated BY statement.
273 MERROR            Issues a warning message for an unresolved macro reference.
274 METAAUTORESOURCES=
275                   Specifies the metadata resources that are assigned when SAS starts.
276 METACONNECT=      Specifies the profile from the metadata user connection profiles that is used to
277                   connect to the SAS Metadata Server.
278 METAENCRYPTALG=SASPROPRIETARY
279                   Specifies the type of encryption to use to communicate with the SAS Metadata
280                   Server.
281 METAENCRYPTLEVEL=CREDENTIALS
282                   Specifies the level of encryption that is used to communicate with the SAS
283                   Metadata Server.
284 METAID=           Specifies the ID of the SAS Metadata Server.
285 METAPASS=XXXXXXXX Specifies the SAS Metadata Server password.
286 METAPORT=8561     Specifies the TCP port for the SAS Metadata Server.
287 METAPROFILE=      Specifies the XML document that contains SAS Metadata Server user connection
288                   profiles.
289 METAPROTOCOL=BRIDGE
290                   Specifies the network profile to use to connect to the SAS Metadata Server.
291 METAREPOSITORY=Foundation
292                   Specifies the name of the SAS Metadata Server Repository.
293 METASERVER=       Specifies the host name or address of the SAS Metadata Server.
294 METASPN=          Specifies the service principal name (SPN) for the SAS Metadata Server.
295 METAUSER=         Specifies the user ID that is used to connect to the SAS Metadata Server.
296 NOMEXECNOTE       Does not display the macro execution information in the SAS log when the macro is
297                   invoked.
298 MEXECSIZE=65536   Specifies the maximum macro size that can be executed in memory.
299 NOMFILE           Does not write MPRINT output to an external file.
300 MINDELIMITER=     Specifies the character delimiter for the macro IN operator.
301 NOMINOPERATOR     Disables IN logical operators in expressions.
302 MINPARTSIZE=16777216
303                   Specifies the minimum size of the data component partitions for SPD Engine data
304                   sets.
305 MISSING=.         Specifies the character to print for missing numeric values.
306 NOMLOGIC          Does not trace macro execution or write the results to the SAS log.
307 NOMLOGICNEST      Does not display the macro nesting information in the SAS log for MLOGIC output.
308 NOMPRINT          Does not display the SAS statements that are generated by macro execution.
309 NOMPRINTNEST      Does not display the macro nesting information from the MPRINT output in the SAS
310                   log.
311 NOMRECALL         Searches the autocall libraries only once for a requested macro.
312 MREPLACE          Enables updates to macro definitions in the Work library.
313 MSGLEVEL=N        Specifies the level of detail in SAS log messages.
314 NOMSTORED         Does not search for stored compiled macros.
315 MSYMTABMAX=4194304
316                   Specifies the maximum amount of memory available to the macro variable symbol
317                   table or tables.
318 NOMULTENVAPPL     List only operating environment fonts in the font selector window of a SAS
319                   application.
320 MVARSIZE=4096     Specifies the maximum size for a macro variable that is stored in memory.
321 NONETENCRYPT      Does not require encryption for client/server data transfers.
322 NETENCRYPTALGORITHM=
323                   Specifies one or more algorithms to use for encrypted client/server data transfers.
324 NETENCRYPTKEYLEN=0
325                   Specifies the key length that is used by the encryption algorithm for encrypted
326                   client/server data transfers.
327 NEWS=             Specifies the location of the news file that is to be written to the SAS log
328                   immediately after the header.
329 NOTES             SAS writes notes to the SAS log.
330 NUMBER            Prints the page number on the first title line of each page of SAS output.
331 NOOBJECTSERVER    Disables SAS from running an Integrated Object Model (IOM) server.
332 OBS=9223372036854775807
333                   Specifies the observation that is used to determine the last observation to
334                   process, or specifies the last record to process.
335 ODSDEST=AUTO      Specifies the default ODS destination.
336 ODSGRAPHICS=AUTO  Specifies the setting for ODS graphics.
337 NOODSLANGCHG      Disables changing the language of the SAS message text in ODS output when the
338                   LOCALE option is set after start up.
339 ODSSTYLE=AUTO     Specifies the ODS HTML default style.
340 OLAPCONFIG=       Specifies the name of the XML configuration file that is used to initialize an
341                   OLAP server.
342 ORIENTATION=PORTRAIT
343                   Specifies the paper orientation to use when printing to a printer.
344 NOOVP             Disables overprinting of error messages to make them bold.
345 NOPAGEBREAKINITIAL
346                   Does not begin SAS log and procedure output for the LISTING destination on a new
347                   page.
348 PAGENO=1          Resets the SAS output page number.
349 PAGESIZE=56       Specifies the number of lines that compose a page of the SAS log and SAS output.
350 PAPERDEST=        Specifies the name of the output bin to receive printed output.
351 PAPERSIZE=LETTER  Specifies the paper size to use for printing.
352 PAPERSOURCE=      Specifies the name of the paper bin to use for printing.
353 PAPERTYPE=PLAIN   Specifies the type of paper to use for printing.
354 PARM=             Specifies a parameter string that is passed to an external program.
355 PARMCARDS=FT15F001
356                   Specifies the file reference to open when SAS encounters the PARMCARDS statement
357                   in a procedure.
358 PDFACCESS         Enables screen readers to read PDF text and graphics.
359 NOPDFASSEMBLY     Disables assembly of PDF documents.
360 NOPDFCOMMENT      Disables comments in PDF documents from being modified.
361 NOPDFCONTENT      Disables modification of PDF document content.
362 PDFCOPY           Enables PDF document text and graphics to be copied.
363 PDFFILLIN         Enables PDF forms to be filled in.
364 PDFPAGELAYOUT=DEFAULT
365                   Specifies the page layout for PDF documents.
366 PDFPAGEVIEW=DEFAULT
367                   Specifies the page viewing mode for PDF documents.
368 PDFPASSWORD=XXXXXXXX
369                   Specifies the password to use to open a PDF document and the password used by a
370                   PDF document owner.
371 PDFPRINT=HRES     Specifies the resolution to print PDF documents.
372 PDFSECURITY=NONE  Specifies the level of encryption to use for PDF documents.
373 NOPRESENV         Specifies that collecting data for the preservation of the SAS environment is
374                   disabled.
375 PRIMARYPROVIDERDOMAIN=
376                   Specifies the domain name of the primary authentication provider.
377 PRINTERPATH=      Specifies the name of a registered printer to use for Universal Printing.
378 NOPRINTINIT       Preserves the procedure output file for the LISTING destination if no new output
379                   is created.
380 PRINTMSGLIST      Specifies to print the entire list of messages to the SAS log.
381 QUOTELENMAX       Writes a warning message to the SAS log if a quoted string exceeds the maximum
382                   length allowed.
383 REPLACE           Enables replacement of permanent SAS data sets.
384 REUSE=NO          Specifies whether SAS reuses space when observations are added to a compressed SAS
385                   data set.
386 RIGHTMARGIN=0.000 IN
387                   Specifies the print margin for the right side of the page.
388 NORLANG           Disables SAS from executing R language statements.
389 RSASIOTRANSERROR  Displays a transcoding error when illegal values are read from a remote
390                   application.
391 NORSASUSER        Opens the Sasuser library in Write mode.
392 S=0               Specifies the length of statements on each line of a source statement, and the
393                   length of data on lines that follow a DATALINES statement.
394 S2=0              Specifies the length of statements of each line of a source statement from an
395                   %INCLUDE statement, an AUTOEXEC= file, or an autocall macro file.
396 S2V=0             Specifies the column to begin reading a file with variable length records that is
397                   specified in an %INCLUDE statement, an autoexec file, or an autocall macro.
398 SASAUTOS=SASAUTOS Specifies the location of one or more autocall libraries.
399 SASCMD=           Specifies the command that starts a server session on a symmetric multiprocessing
400                   (SMP) computer.
401 SASFRSCR=         A read-only option that contains the fileref, generated by the SASSCRIPT option,
402                   for SAS/CONNECT server sign-on script files.
403 SASHELP=(      "!SASROOT\core\sashelp"      "!SASROOT\connect\sashelp"      "!SASROOT\cmp\sashelp"  )
404                   Specifies the location of the Sashelp library.
405 SASMSTORE=        Specifies the libref of a SAS catalog for stored compiled SAS macros.
406 SASSCRIPT=        Specifies one or more locations of SAS/CONNECT server sign-on script files.
407 SASUSER=sasuser   Specifies a libref or a path that identifies a library for the user's profile
408                   catalog.
409 SECPACKAGE=Negotiate
410                   Specifies the security package that the IOM server uses to authenticate incoming
411                   client connections.
412 SECPACKAGELIST=Kerberos,NTLM
413                   Specifies the security authentication packages that are used by the server.
414 SEQ=8             Specifies the length of the numeric portion of the sequence field in input source
415                   lines or data lines.
416 SERROR            Issues a warning message when a macro variable reference does not match a macro
417                   variable.
418 NOSETINIT         Disables PROC SETINIT to prevent updating site licensing information.
419 SHARESESSIONCNTL=SERVER
420                   Specifies whether the SAS/SHARE server has one or multiple connections to clients.
421 SIGNONWAIT        Executes the SIGNON statement synchronously, signing on clients to the server one
422                   at a time.
423 SKIP=0            Specifies the number of lines to skip at the top of each page of SAS output for
424                   the LISTING destination.
425 SOLUTIONS         Displays the Solutions menu in SAS windows.
426 SORTDUP=PHYSICAL  Specifies whether PROC SORT removes duplicate variables based on the DROP and KEEP
427                   options or on all data set variables.
428 SORTEQUALS        PROC SORT maintains the relative position in the output data set for observations
429                   with identical BY-variable values.
430 SORTSEQ=          Specifies a language-specific collating sequence for the SORT and SQL procedures.
431 SORTSIZE=67108864 Specifies the amount of memory that is available to the SORT procedure.
432 NOSORTVALIDATE    SORT does not verify whether a data set is sorted according to the variables in
433                   the BY statement.
434 SOURCE            Writes program source statements to the SAS log.
435 NOSOURCE2         Does not write secondary source statements from included files to the SAS log.
436 NOSPDEFILECACHE   Disables caching of opened SPD Engine files.
437 SPDEINDEXSORTSIZE=33554432
438                   Specifies the memory size for sorting index values.
439 SPDEMAXTHREADS=0  Specifies the maximum number of threads that the SPD Engine can spawn for I/O
440                   processing.
441 SPDESORTSIZE=33554432
442                   Specifies the memory size that is used for sorting by the SPD Engine.
443 SPDEUTILLOC=      Specifies one or more locations where the SPD Engine can temporarily store utility
444                   files.
445 SPDEWHEVAL=COST   Specifies the WHERE statement evaluation process for the SPD Engine.
446 NOSPOOL           Does not write SAS statements to a utility data set in the Work library.
447 SQLCONSTDATETIME  PROC SQL replaces references to the DATE, TIME, DATETIME, and TODAY functions with
448                   their equivalent constant values before a query executes.
449 SQLGENERATION=(NONE DBMS='TERADATA DB2 ORACLE NETEZZA ASTER GREENPLM HADOOP')
450                   Specifies whether and when SAS procedures generate SQL for in-database processing
451                   of source data.
452 NOSQLIPONEATTEMPT Allows an SQL query to continue processing when an implicit pass-through request
453                   fails.
454 SQLMAPPUTTO=SAS_PUT
455                   Specifies the PUT function mapping to SQL.
456 SQLREDUCEPUT=DBMS For PROC SQL, specifies the engine type to use to optimize a PUT function in a
457                   query.
458 SQLREDUCEPUTOBS=0 For PROC SQL, specifies the minimum number of observations that must be in a table
459                   for PROC SQL to optimize the PUT function in a query.
460 SQLREDUCEPUTVALUES=0
461                   For PROC SQL, specifies the maximum number of SAS format values that can exist in
462                   a PUT function expression to optimize the PUT function in a query.
463 SQLREMERGE        PROC SQL processes queries that use remerged data.
464 SQLUNDOPOLICY=REQUIRED
465                   Specifies how PROC SQL handles updated data if errors occur while you are updating
466                   data.
467 NOSSLCLIENTAUTH   Does not require the server to perform client authentication for a server
468                   connection.
469 NOSSLCRLCHECK     Does not check the Certificate Revocation List (CRL) when a digital certificate is
470                   validated.
471 NOSSPI            Does not use Security Support Provider Interface for single sign-on connections to
472                   IOM servers.
473 STARTLIB          Assigns user-defined permanent librefs when SAS starts.
474 NOSTEPCHKPT       Disables recording of checkpoint-restart data for DATA and PROC steps for batch
475                   programs.
476 STEPCHKPTLIB=WORK Specifies the libref of the library where checkpoint-restart data for DATA and
477                   PROC steps is saved.
478 NOSTEPRESTART     Disables restart mode which executes batch programs using checkpoint-restart data
479                   collected for DATA and PROC steps in a prior execution.
480 STRIPESIZE=       Specifies path and size pairs to identify I/O device stripe size.  Stripe size
481                   indicates page size when creating a data set or utility file.
482 SUMSIZE=0         Specifies a limit on the amount of memory that is available for data summarization
483                   procedures when class variables are active.
484 SVGAUTOPLAY       Starts animation when the page is loaded in the browser.
485 NOSVGCONTROLBUTTONS
486                   Does not display the paging control buttons and an index in a multipage SVG
487                   document.
488 SVGFADEIN=0       Specifies the number of seconds for the fade-in effect for a graph.
489 SVGFADEMODE=OVERLAP
490                   Specifies whether to use sequential frames or to overlap frames for the fade-in
491                   effect of a graph.
492 SVGFADEOUT=0      Specifies the number of seconds for a graph to fade out of view.
493 SVGHEIGHT=        Specifies the height of the viewport. Specifies the value of the height attribute
494                   of the outermost SVG element.
495 NOSVGMAGNIFYBUTTON
496                   Disables the SVG magnifier tool.
497 SVGPRESERVEASPECTRATIO=
498                   Specifies whether to force uniform scaling of SVG output. Specifies the
499                   preserveAspectRatio attribute on the outermost SVG element.
500 SVGTITLE=         Specifies the text in the title bar of the SVG output. Specifies the value of the
501                   TITLE element in the SVG file.
502 SVGVIEWBOX=       Specifies the coordinates, width, and height that are used to set the viewBox
503                   attribute on the outermost SVG element.
504 SVGWIDTH=         Specifies the width of the viewport. Specifies the value of the width attribute of
505                   the outermost SVG element.
506 SVGX=             Specifies the x-axis coordinate of one corner of the rectangular region for an
507                   embedded SVG element. Specifies the x attribute in the outermost SVG element.
508 SVGY=             Specifies the y-axis coordinate of one corner of the rectangular region for an
509                   embedded SVG element. Specifies the y attribute in the outermost SVG element.
510 NOSYMBOLGEN       Does not display the results of resolving macro variable references in the SAS log.
511 SYNCHIO           Requires that data set I/O must be completed before other logical SAS tasks can be
512                   executed.
513 SYNTAXCHECK       Enables syntax check mode for multiple steps in non-interactive or batch SAS
514                   sessions.
515 SYSPARM=          Specifies a character string that can be passed to SAS programs.
516 SYSPRINTFONT=     Specifies the default font to use for printing.
517 NOSYSRPUTSYNC     Sets the %SYSRPUT macro variables in the client session when a synchronization
518                   point is encountered.
519 TBUFSIZE=0        Specifies the size of the buffer that is used by SAS applications to transfer
520                   client/server data across a network.
521 TCPLISTENTIME=0   Specifies the amount of time that a SAS/CONNECT server listens for a client to
522                   connect before terminating the CONNECT server session.
523 TCPPORTFIRST=0    Specifies the first value in a range of TCP/IP ports for a client to use to
524                   connect to a server.
525 TCPPORTLAST=0     Specifies the last value in a range of TCP/IP ports for a client to use to connect
526                   to a server.
527 TENANTID=         Specifies a name that identifies a tenant in a multi-tenant environment.
528 TERMINAL          Associates a terminal with a SAS session.
529 TERMSTMT=         Specifies the SAS statement to execute when SAS terminates.
530 TEXTURELOC=       Specifies the location of textures and images that are used by ODS styles.
531 THREADS           Uses threaded processing for SAS applications that support it.
532 TIMEZONE=         Specifies a time zone.
533 TOOLSMENU         Displays the Tools menu in SAS windows.
534 TOPMARGIN=0.000 IN
535                   Specifies the print margin at the top of the page.
536 TRAINLOC=         Specifies the URL for SAS online training courses.
537 TRANTAB=(lat1lat1,lat1lat1,wcyr_ucs,wcyr_lcs,wcyr_ccl,,,)
538                   Specifies the translation table catalog entries.
539 TSID=             Specifies a logical server metadata object that identifies a table service
540                   definition.
541 UBUFNO=0          Specifies the number of utility file buffers.
542 UBUFSIZE=0        Specifies the size of utility file buffers.
543 NOUNIVERSALPRINT  Disables Universal Printing and uses Windows printing.
544 UPRINTCOMPRESSION Enables compression of files that are created by some Universal Printers and
545                   SAS/GRAPH devices.
546 URLENCODING=SESSION
547                   Specifies whether the argument to the URLENCODE function and to the URLDECODE
548                   function is interpreted using the SAS session encoding or UTF-8 encoding.
549 USER=             Specifies the default permanent library to use for one-level SAS data set names.
550 UTILLOC=WORK      Specifies one or more file system locations in which threaded applications can
551                   store utility files.
552 UUIDCOUNT=100     Specifies the number of UUIDs to acquire from the UUID Generator Daemon.
553 UUIDGENDHOST=     Specifies the host and port, or the LDAP URL that the UUID Generator Daemon runs
554                   on.
555 V6CREATEUPDATE=NOTE
556                   Specifies the type of message to write to the SAS log when Version 6 data sets are
557                   created or updated.
558 VALIDFMTNAME=LONG Specifies the maximum size that user-created formats and informat names can be
559                   before an error or warning is issued.
560 VALIDMEMNAME=COMPAT
561                   Specifies the rules for naming SAS data sets, SAS data views, and item stores.
562 VALIDVARNAME=V7   Specifies the rules for valid SAS variable names that can be created and processed
563                   during a SAS session.
564 VARINITCHK=NOTE   Specifies the type of message to write to the SAS log when a variable is not
565                   initialized.
566 VARLENCHK=WARN    Specifies the type of message to write to the SAS log when the length of the
567                   variable that is being read is longer than the length that is defined for the
568                   variable.
569 VBUFSIZE=65536    Specifies the buffer size for a view.
570 VIEWMENU          Displays the View menu in SAS windows.
571 VNFERR            SAS issues an error message when a BY variable exists in one data set but not
572                   another when the other data set is _NULL_.
573 WORK=D:\andray\_ðàçíîå\MEGA\SAS9.4\tst\work\_TD6852_MAKAROVAS_
574                   Specifies the libref or location of the Work library.
575 WORKINIT          At SAS invocation, erases files that exist from a previous SAS session in an
576                   existing Work library.
577 WORKTERM          Erases the Work files when SAS terminates.
578 YEARCUTOFF=1926   Specifies the first year of a 100-year span that is used by date informats and
579                   functions to read a two-digit year.
580 _LAST_=WORK.TEMP_RS
581                   Specifies the most recently created data set.
582
583Host Options:
584
585 ACCESSIBILITY=STANDARD
586                   Specifies whether accessibility features are enabled in the Customize Tool dialog
587                   box and in some Properties dialog boxes.
588 ALIGNSASIOFILES   Aligns SAS files on a page boundary for improved performance.
589 ALTLOG=           Specifies the location for a copy of the SAS log when SAS is running in batch mode.
590 ALTPRINT=         Specifies the location for a copy of the SAS procedure output when SAS is running
591                   in batch mode.
592 AUTHPROVIDERDOMAIN=
593                   Specifies the authentication provider that is associated with a domain.
594 AUTHSERVER=       Specifies the domain server that finds and authenticates secure server logins.
595 AWSCONTROL=(SYSTEMMENU MINMAX TITLE)
596                   Specifies whether the main SAS window includes a title bar, a system control menu,
597                   and minimize and maximize buttons.
598 AWSDEF=(0 0 80 80)
599                   Specifies the location and dimensions of the main SAS window when SAS initializes.
600 AWSMENU           Displays the menu bar in the main SAS window.
601 AWSMENUMERGE      Embeds menu items that are specific to Windows in the main menus.
602 AWSTITLE=         Specifies the text that appears in the title bar of the main SAS window.
603 COMAUX1=          Specifies the first alternate communications access method.
604 COMAUX2=          Specifies the second alternate communications access method.
605 COMDEF=(BOTTOM CENTER)
606                   Specifies the location where the SAS Command window is displayed by default.
607 CONFIG=D:\andray\_ðàçíîå\MEGA\SAS9.4\tst\sasv9.cfg
608                   Specifies the configuration file that is used when initializing or overriding the
609                   values of SAS system options.
610 NODBCS            Disables double-byte character sets.
611 DBCSLANG=NONE     Specifies a double-byte character set language.
612 DBCSTYPE=NONE     Specifies the encoding method to use for a double-byte character set.
613 ECHO=             Specifies the message to be echoed to the SAS log while initializing SAS.
614 EMAILDLG=NATIVE   Specifies whether to use the native e-mail dialog box that is provided by your
615                   e-mail application or the e-mail dialog box that is provided by SAS.
616 EMAILSYS=MAPI     Specifies the e-mail protocol to use for sending electronic mail.
617 ENCODING=WCYRILLIC
618                   Specifies the default character-set encoding for the SAS session.
619 NOENHANCEDEDITOR  Does not invoke the Enhanced Editor when SAS starts.
620 FILELOCKWAIT=0    Specifies the number of seconds that SAS will wait for a locked file.
621 FILELOCKWAITMAX=600
622                   Specifies the number of seconds that SAS waits for a locked file to become
623                   available.
624 FILTERLIST=       Specifies an alternative set of file filter specifications to use for the Open and
625                   Save As dialog boxes.
626 FONT=(BatangChe 8)
627                   Specifies a font to use for SAS windows.
628 FONTALIAS=        Assigns a Windows font to one of the SAS fonts.
629 NOFULLSTIMER      Does not write performance statistics to the SAS log.
630 HELPLOC=()        Specifies the location of the text and index files for the facility that is used
631                   to view the online SAS Help and Documentation.
632 HELPREGISTER=     Registers help files to access from the main SAS window Help menu.
633 HOSTPRINT         Prints using Windows printing.
634 NOICON            Restores the main SAS window.
635 JREOPTIONS=       Specifies the Java Runtime Environment options for SAS.
636 LOADMEMSIZE=0     Specifies a suggested amount of memory that is needed for executable programs
637                   loaded by SAS.
638 LOCALE=RU_RU      Specifies a set of attributes in a SAS session that reflect the language, local
639                   conventions, and culture for a geographical region.
640 LOG=0             Specifies a location for the SAS log when SAS is running in batch mode.
641 MAXMEMQUERY=0     Specifies the maximum amount of memory that is allocated for procedures.
642 MEMBLKSZ=16777216 Specifies the memory block size for Windows memory-based libraries.
643 MEMCACHE=0        Specifies to use the memory-based libraries as a SAS file cache.
644 NOMEMLIB          Does not process the Work library as a memory-based library.
645 MEMMAXSZ=2147483648
646                   Specifies the maximum amount of memory to allocate for using memory-based
647                   libraries.
648 MEMSIZE=3941886720
649                   Specifies the limit on the amount of virtual memory that can be used during a SAS
650                   session.
651 MSG=(      "!SASROOT\core\sasmsg"      "!SASROOT\cmp\sasmsg"  )
652                   Specifies the path to the library that contains SAS error messages.
653 NOMSGCASE         Specifies that SAS writes notes, warning, and error messages in mixed casing.
654 NONLSCOMPATMODE   Encodes data using the SAS session encoding.
655 NUMKEYS=12        Specifies the number of available function keys.
656 NUMMOUSEKEYS=3    Specifies the number of mouse buttons that SAS displays in the KEYS window.
657 NOOPLIST          Does not write SAS system option settings to the SAS log.
658 PATH=(       "!SASROOT\core\sasexe"      "!SASROOT\baseui\sasexe"      "!SASROOT\connect\sasexe"
659 "!SASROOT\cmp\sasexe"   )
660                   Specifies one or more search paths for SAS executable files.
661 PFKEY=(WIN)       Specifies which set of function keys to designate as the primary set of function
662                   keys.
663 PRINT=0           Specifies a location for SAS output when running in batch mode.
664 PRNGETLIST        Recognizes printers that are attached to the system.
665 PRTABORTDLGS=BOTH Specifies when to display the Print Abort dialog box.
666 NOPRTPERSISTDEFAULT
667                   SAS uses the default printer.
668 PRTSETFORMS       Include the Use Forms checkbox in the Print Setup dialog box.
669 REALMEMSIZE=0     Specifies the amount of real memory SAS can expect to allocate.
670 REGISTER=         Adds an application to the Tools menu in the main SAS window.
671 RESOURCESLOC=( D:\andray\_ðàçíîå\MEGA\SAS9.4\tst\core\resource )
672                   Specifies a directory location of the files that contain SAS resources.
673 RTRACE=NONE       Produces a list of resources that are read or loaded during a SAS session.
674 RTRACELOC=        Specifies the pathname of the file to which the list of resources that are read or
675                   loaded during a SAS session is written.
676 SASCONTROL=(SYSTEMMENU MINMAX)
677                   Specifies whether the SAS application windows include system and control menus,
678                   and minimize and maximize buttons.
679 SASINITIALFOLDER= When SAS starts, changes the working folder and the default folder for the Open
680                   and Save As dialog boxes to a specified folder.
681 NOSCROLLBARFLASH  Disables mouse and keyboard focus on the scroll bar to eliminate cursor flashing.
682 SET=[SASROOT = "D:\andray\_ðàçíîå\MEGA\SAS9.4\tst"]
683                   Defines a SAS environment variable.
684 NOSGIO            Disables the Scatter/Gather I/O feature.
685 SLEEPCNTL=NO      Specifies whether SAS prevents Windows from going into sleep mode.
686 SLEEPWINDOW       Enables the SLEEP window.
687 SORTANOM=         Specifies options for the host sort utility.
688 SORTCUT=0         Specifies the data size in number of observations above which SAS uses the host
689                   sort instead of the internal SAS sort.
690 SORTCUTP=0        Specifies the data size in bytes above which SAS uses the host sort instead of the
691                   internal SAS sort.
692 SORTDEV=          Specifies the pathname that is used for temporary files that are created by the
693                   host sort utility.
694 SORTNAME=         Specifies the name of the host sort utility.
695 SORTPARM=         Specifies the parameters for the host sort utility.
696 SORTPGM=BEST      Specifies whether to use the SAS sort utility or the host sort utility or to let
697                   SAS choose the sort utility.
698 NOSPLASH          Does not display the splash screen (logo screen) when SAS starts.
699 SPLASHLOC=        Specifies the location of the splash screen (logo screen) bitmap that appears when
700                   SAS starts.
701 SSLCERTISS=       Specifies the name of the issuer of the digital certificate that SSL should use.
702 SSLCERTSERIAL=    Specifies the serial number of the digital certificate that SSL should use.
703 SSLCERTSUBJ=      Specifies the subject name of the digital certificate that SSL should use.
704 STIMEFMT=(NLDATM2. HMS TIMEAMPM KB MEMFULL TSFULL NC)
705                   Specifies the format that is used to display the FULLSTIMER and STIMER output for
706                   timestamp, memory, CPU and elapsed time statistics.
707 STIMER            Writes real and CPU time to the SAS log.
708 SYSGUIFONT=       Specifies a font to use for the button text and the descriptive text.
709 SYSIN=            Specifies the SAS program to execute in batch.
710 SYSPRINT=("Microsoft XPS Document Writer")
711                   Specifies a destination printer for printing SAS output.
712 TOOLDEF=(TOP RIGHT)
713                   Specifies the Toolbox display location.
714 NOUPRINTMENUSWITCH
715                   Disables the Universal Printing commands on the File menu.
716 USERCONFIG        Process .sasv9.cfg and sasv9.cfg configuration files in user's home directory.
717 USERICON=         Specifies the pathname of the resource file that is associated with the
718                   user-defined icon.
719 NOVERBOSE         Does not write start-up system options to the SAS log.
720 NOWEBUI           Disables Web enhancements.
721 NOWINDOWSMENU     Disables the Window menu in the main window if NOAWSMENUMERGE is specified.
722 XCMD              Enables the X command in SAS.
723 NOXMIN            Starts the application that is specified in the X command in the default active
724                   state.
725 XSYNC             Windows commands execute synchronously with SAS.
726 XWAIT             The DOS shell closes and returns to SAS after EXIT is entered on the command line.