· 6 years ago · Feb 13, 2020, 06:30 PM
1Android Bootloader - UART_DM Initialized!!!
2device type 1 = 0x0
3device type 2 = 0x8
4device type 1 = 0x0
5device type 2 = 0x8
6device type 1 = 0x0
7device type 2 = 0x8
8rt5033_set_charger_enable: charger enable(0x2)
9device type 1 = 0x0
10device type 2 = 0x8
11device type 1 = 0x0
12device type 2 = 0x8
13BOOTLOADER VERSION : A500FXXS1CQC1
14Get DATA success.
15Get DATA success.
16check_pit_integrity: invalid pit magic code.(0x0)
17AST_POWERON
18Android Bootloader - UART_DM Initialized!!!
19[0] welcome to lk
20
21[0] calling constructors
22[0] initializing heap
23[0] initializing threads
24[0] initializing dpc
25[0] initializing timers
26[0] creating bootstrap completion thread
27[10] top of bootstrap2()
28[10] initializing platform
29[10] platform_init()
30[10] initializing target
31[10] target_init()
32[20] Initializing MMC host data structure and clock!
33[40] Decoded CID fields:
34[40] Manufacturer ID: 15
35[40] OEM ID: 0x100
36[40] Product Name: R311MB
37[50] Product revision: 0.0
38[50] Product serial number: 8A26EECB
39[50] Manufacturing date: 1 2009
40[60] Decoded CSD fields:
41[60] cmmc_structure: 3
42[60] card_cmd_class: f5
43[60] write_blk_len: 512
44[70] read_blk_len: 512
45[70] r2w_factor: 3
46[70] sector_size: 0
47[70] c_size_mult:7
48[70] c_size: 4095
49[70] nsac_clk_cycle: 100
50[80] taac_ns: 15000000
51[80] tran_speed: 0 kbps
52[80] erase_blk_len: 1
53[80] read_blk_misalign: 0
54[90] write_blk_misalign: 0
55[90] read_blk_partial: 0
56[90] write_blk_partial: 0
57[90] wp_grp_size: 16384
58[90] Card Capacity: 15758000128 Bytes
59[100] SDHC Running in HS200 mode
60[110] Done initialization of the card
61[110] erase_grpsize: 31
62[120] erase_grpmult: 31
63[120] wp_grpsize: 15
64[120] wp_grpen: 1
65[120] perm_wp: 0
66[120] temp_wp: 0
67[130] pm8x41_get_is_cold_boot: cold boot
68[130] calling apps_init()
69[130] Updating board hardware id: 0x8 -> 0x1
70[140] Updating board hardware subtype: 0x0 -> 0x6
71[140] Updating board target id: 0x10008 -> 0x8ff08
72[150] Command line from primary bootloader: lk2nd androidboot.sec_atd.tty=/dev/ttyHSL0 loglevel=4 sec_log=0x100000@0xafe00008 sec_dbg=0x80000@0xaff00008 androidboot.revision=8 androidboot.warranty_bit=1 androidboot.bootloader=A500FXXS1CQC1 lpm_levels.sleep_disabled=1 fg_reset=1 androidboot.boot_recovery=0 sec_debug.reset_reason=0x9 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 androidboot.cp_debug_level=0x55FF sec_debug.enable_cp_debug=0 vmalloc=340M cordon=72cdbac618a47d8931282f8c10593885 connie=SM-A500F_OPEN_EUR_c6295ee47b6ec137890116b3c930c9b1 lcd_id=0x822003 androidboot.security_mode=1526595584 androidboot.emmc=true androidboot.serialno=8a26eecb androidboot.baseband=msm lcd_id=0x822003 mdss_mdp.panel=1:dsi:0:ss_dsi_panel_EA8061V_AMS497EE01_HD:1:none
73[220] Failed to find matching lk2nd,device node: -1
74[220] Ignoring attempt to write device info
75[220] Neither 'config' nor 'frp' partition found
76[230] Display Init: Start
77[230] Panel: ▒▒
78[230] Continuous splash detected: base: 0x8e000000, stride: 2160, source: 720x1280 (0,0), output: 720x1280 (0,0)
79[240] smem ram ptable found: ver: 1 len: 5
80[250] smem ram ptable found: ver: 1 len: 5
81[250] Display Init: Done
82[250] serial number: 8a26eecb
83[250] partition misc doesn't exist
84[260] error in emmc_recovery_init
85[260] Unable to locate /bootselect partition
86[270] No 'misc' partition found
87[270] Error reading MISC partition
88[270] failed to get ffbm cookie[270] Loading boot image (10182656): start
89[350] Loading boot image (10182656): done
90[350] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
91[350] decompress image start
92[600] decompressed image finished.
93[610] smem ram ptable found: ver: 1 len: 5
94[610] smem ram ptable found: ver: 1 len: 5
95[610] smem ram ptable found: ver: 1 len: 5
96[620] smem ram ptable found: ver: 1 len: 5
97[620] smem ram ptable found: ver: 1 len: 5
98[620] smem ram ptable found: ver: 1 len: 5
99[630] smem ram ptable found: ver: 1 len: 5
100[650] smem ram ptable found: ver: 1 len: 5
101[650] smem ram ptable found: ver: 1 len: 5
102[650] qcom,msm-id entry not found
103[660] Only one appended non-skales DTB, select it.
104[660] cmdline: earlycon=msm_serial_dm,0x78b0000 console=ttyMSM0,115200,n8 PMOS_NO_OUTPUT_REDIRECT androidboot.emmc=true androidboot.serialno=8a26eecb androidboot.baseband=msm
105[680] Updating device tree: start
106[680] smem ram ptable found: ver: 1 len: 5
107[760] Setting WLAN mac address in DT: 02:00:8A:26:EE:CB
108[790] Setting Bluetooth BD address in DT: 02:00:8A:26:EE:CA
109[790] Setting BT mac address in DT: 02:00:8A:26:EE:CA
110[800] Updating device tree: done
111[800] booting linux @ 0x80080000, ramdisk @ 0x82000000 (4998041), tags/device tree @ 0x81e00000
112[810] Jumping to kernel via monitor
113[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd030]
114[ 0.000000] Linux version 5.5.0-rc7-postmarketos-qcom-msm8916 (pmos@build) (gcc version 9.2.0 (Alpine 9.2.0)) #1 SMP PREEMPT Sun Jan 26 21:46:41 UTC 2020
115[ 0.000000] Machine model: Samsung Galaxy A5U (EUR)
116[ 0.000000] earlycon: msm_serial_dm0 at MMIO 0x00000000078b0000 (options '')
117[ 0.000000] printk: bootconsole [msm_serial_dm0] enabled
118[ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
119[ 0.000000] percpu: Embedded 21 pages/cpu s48600 r8192 d29224 u86016
120[ 0.000000] Detected VIPT I-cache on CPU0
121[ 0.000000] CPU features: detected: ARM errata 826319, 827319, 824069, 819472
122[ 0.000000] CPU features: detected: ARM erratum 845719
123[ 0.000000] CPU features: detected: ARM erratum 843419
124[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 507904
125[ 0.000000] Kernel command line: earlycon=msm_serial_dm,0x78b0000 console=ttyMSM0,115200,n8 PMOS_NO_OUTPUT_REDIRECT androidboot.emmc=true androidboot.serialno=8a26eecb androidboot.baseband=msm
126[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
127[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
128[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
129[ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
130[ 0.000000] Memory: 1908496K/2064384K available (6718K kernel code, 558K rwdata, 2624K rodata, 1408K init, 305K bss, 123120K reserved, 32768K cma-reserved)
131[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
132[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
133[ 0.000000] Tasks RCU enabled.
134[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
135[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
136[ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x43c with crng_init=0
137[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
138[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
139[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
140[ 0.011097] Console: colour dummy device 80x25
141[ 0.018777] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
142[ 0.023274] pid_max: default: 32768 minimum: 301
143[ 0.033700] LSM: Security Framework initializing
144[ 0.038358] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
145[ 0.042904] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
146[ 0.074364] ASID allocator initialised with 32768 entries
147[ 0.082361] rcu: Hierarchical SRCU implementation.
148[ 0.098401] smp: Bringing up secondary CPUs ...
149[ 0.130818] Detected VIPT I-cache on CPU1
150[ 0.130867] CPU1: Booted secondary processor 0x0000000001 [0x410fd030]
151[ 0.162828] Detected VIPT I-cache on CPU2
152[ 0.162872] CPU2: Booted secondary processor 0x0000000002 [0x410fd030]
153[ 0.194885] Detected VIPT I-cache on CPU3
154[ 0.194925] CPU3: Booted secondary processor 0x0000000003 [0x410fd030]
155[ 0.195009] smp: Brought up 1 node, 4 CPUs
156[ 0.225430] SMP: Total of 4 processors activated.
157[ 0.229504] CPU features: detected: 32-bit EL0 Support
158[ 0.234293] CPU features: detected: CRC32 instructions
159[ 0.246737] CPU: All CPU(s) started at EL1
160[ 0.246777] alternatives: patching kernel code
161[ 0.250867] devtmpfs: initialized
162[ 0.265030] KASLR disabled due to lack of seed
163[ 0.265375] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
164[ 0.268391] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
165[ 0.279450] pinctrl core: initialized pinctrl subsystem
166[ 0.285543] thermal_sys: Registered thermal governor 'step_wise'
167[ 0.286648] NET: Registered protocol family 16
168[ 0.303042] DMA: preallocated 256 KiB pool for atomic allocations
169[ 0.303097] audit: initializing netlink subsys (disabled)
170[ 0.308273] audit: type=2000 audit(0.252:1): state=initialized audit_enabled=0 res=1
171[ 0.313527] cpuidle: using governor menu
172[ 0.321569] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
173[ 0.344356] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
174[ 0.344384] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
175[ 0.350132] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
176[ 0.356808] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
177[ 0.365739] cryptd: max_cpu_qlen set to 1000
178[ 0.374986] reg-fixed-voltage regulator-vlcd-vci: nonexclusive access to GPIO for regulator-vlcd-vci
179[ 0.375835] iommu: Default domain type: Translated
180[ 0.383848] SCSI subsystem initialized
181[ 0.388254] usbcore: registered new interface driver usbfs
182[ 0.391991] usbcore: registered new interface driver hub
183[ 0.397508] usbcore: registered new device driver usb
184[ 0.403319] i2c-gpio i2c-muic: using lines 495 (SDA) and 496 (SCL)
185[ 0.408194] i2c-gpio i2c-tkey: using lines 406 (SDA) and 407 (SCL)
186[ 0.414195] i2c-gpio i2c-nfc: using lines 390 (SDA) and 391 (SCL)
187[ 0.420146] pps_core: LinuxPPS API ver. 1 registered
188[ 0.426248] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
189[ 0.431300] PTP clock support registered
190[ ▒[ 0.707110] Freeing initrd memory: 4880K
191[ 0.707700] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
192[ 0.712937] Initialise system trusted keyrings
193[ 0.718311] workingset: timestamp_bits=46 max_order=19 bucket_order=0
194[ 0.749741] Key type asymmetric registered
195[ 0.749762] Asymmetric key parser 'x509' registered
196[ 0.752748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
197[ 0.757514] io scheduler mq-deadline registered
198[ 0.765142] io scheduler kyber registered
199[ 0.775414] msm_serial 78b0000.serial: msm_serial: detected port #0
200[ 0.775462] msm_serial 78b0000.serial: uartclk = 7372800
201[ 0.780528] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 9, base_baud = 460800)▒[ 0.794521] printk: console [ttyMSM0] enabled
202[ 0.794521] printk: console [ttyMSM0] enabled
203[ 0.797858] printk: bootconsole [msm_serial_dm0] disabled
204[ 0.797858] printk: bootconsole [msm_serial_dm0] disabled
205[ 0.808008] msm_serial: driver initialized
206[ 0.813238] qcom-iommu 1ef0000.iommu: iommu sec: pgtable size: 94208
207[ 0.827978] loop: module loaded
208[ 0.828536] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
209[ 0.834545] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
210[ 0.835879] usbcore: registered new interface driver usb-storage
211[ 0.857168] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: registered as rtc0
212[ 0.857327] i2c /dev entries driver
213[ 0.863482] i2c_qup 78b6000.i2c: using default clock-frequency 100000
214[ 0.866254] i2c_qup 78b6000.i2c:
215[ 0.866254] tx channel not available
216[ 0.873555] i2c_qup 78b8000.i2c: using default clock-frequency 100000
217[ 0.879620] i2c_qup 78b8000.i2c:
218[ 0.879620] tx channel not available
219[ 0.886793] i2c_qup 78b9000.i2c: using default clock-frequency 100000
220[ 0.892988] i2c_qup 78b9000.i2c:
221[ 0.892988] tx channel not available
222[ 0.900153] i2c_qup 78ba000.i2c: using default clock-frequency 100000
223[ 0.906350] i2c_qup 78ba000.i2c:
224[ 0.906350] tx channel not available
225[ 0.914617] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pon@800/200f000.spmi:pm8916@0:pon@800:pwrkey/input/input0
226[ 0.920932] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pon@800/200f000.spmi:pm8916@0:pon@800:volume-down/input/input1
227[ 0.936179] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
228[ 0.951322] sdhci: Secure Digital Host Controller Interface driver
229[ 0.957820] sdhci: Copyright(c) Pierre Ossman
230[ 0.963799] sdhci-pltfm: SDHCI platform and OF driver helper
231[ 0.969499] sdhci_msm 7864900.sdhci: Got CD GPIO
232[ 0.975314] ledtrig-cpu: registered to indicate activity on CPUs
233[ 0.980017] usbcore: registered new interface driver usbhid
234[ 0.984561] usbhid: USB HID core driver
235[ 0.990490] NET: Registered protocol family 17
236[ 0.994190] registered taskstats version 1
237[ 0.998184] Loading compiled-in X.509 certificates
238[ 1.016026] debugfs: Directory '4a9000.thermal-sensor' with parent 'tsens' already present!
239[ 1.017870] sdhci_msm 7864900.sdhci: Got CD GPIO
240[ 1.025706] sdhci_msm 7864900.sdhci: Got CD GPIO
241[ 1.029546] s1: supplied by regulator-dummy
242[ 1.029881] input: GPIO Buttons as /devices/platform/gpio-keys/input/input2
243[ 1.032682] s1: Bringing 0uV into 500000-500000uV
244[ 1.037132] input: GPIO Hall Effect Sensor as /devices/platform/gpio-hall-sensor/input/input3
245[ 1.043678] s2: supplied by regulator-dummy
246[ 1.056857] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: setting system clock to 1970-01-01T00:00:06 UTC (6)
247[ 1.057026] s3: supplied by regu[ 1.074848] s4: supplied by regulator-dummy
248[ 1.074935] s4: Bringing 0uV into 1800000-1800000uV
249[ 1.075277] Freeing unused kernel memory: 1408K
250[ 1.077998] l1: supplied by s3
251[ 1.087239] l1: Bringing 0uV into 1225000-1225000uV
252[ 1.090475] l2: supplied by s3
253[ 1.095129] l2: Bringing 0uV into 1200000-1200000uV
254[ 1.098362] l3: supplied by s3
255[ 1.103048] l3: Bringing 0uV into 500000-500000uV
256[ 1.106271] l4: supplied by s4
257[ 1.110931] l4: Bringing 0uV into 2050000-2050000uV
258[ 1.113999] l5: supplied by s4
259[ 1.118652] l5: Bringing 0uV into 1800000-1800000uV
260[ 1.121913] l6: supplied by s4
261[ 1.126575] l6: Bringing 0uV into 1800000-1800000uV
262[ 1.129823] l7: supplied by s4
263[ 1.134454] l7: Bringing 0uV into 1800000-1800000uV
264[ 1.137731] l8: supplied by regulator-dummy
265[ 1.142357] l8: Bringing 0uV into 2850000-2850000uV
266[ 1.146659] l9: supplied by regulator-dummy
267[ 1.151401] l9: Bringing 0uV into 3300000-3300000uV
268[ 1.155681] l10: supplied by regulator-dummy
269[ 1.160409] l10: Bringing 0uV into 2700000-2700000uV
270[ 1.165065] l11: supplied by regulator-dummy
271[ 1.169872] l11: Bringing 0uV into 1800000-1800000uV
272[ 1.174273] l12: supplied by regulator-dummy
273[ 1.179090] l12: Bringing 0uV into 1800000-1800000uV
274[ 1.183468] l13: supplied by regulator-dummy
275[ 1.188277] l13: Bringing 0uV into 3075000-3075000uV
276[ 1.192670] l14: supplied by regulator-dummy
277[ 1.197478] l14: Bringing 0uV into 1800000-1800000uV
278[ 1.201894] l15: supplied by regulator-dummy
279[ 1.206678] l15: Bringing 0uV into 1800000-1800000uV
280[ 1.211090] l16: supplied by regulator-dummy
281[ 1.215881] l16: Bringing 0uV into 1800000-1800000uV
282[ 1.220277] l17: supplied by regulator-dummy
283[ 1.225081] l17: Bringing 0uV into 2850000-2850000uV
284[ 1.229482] l18: supplied by regulator-dummy
285[ 1.234282] l18: Bringing 0uV into 2700000-2700000uV
286[ 1.249702] Run /init as init process
287[ 1.266323] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
288[ 1.267149] sdhci_msm 7864900.sdhci: Got CD GPIO
289### postmarketOS initramfs ###
290Configuring kernel firmware image search path
291modprobe: module ext4 not found in modules.dep
292modprobe: module usb_f_rndis not found in modules.dep
293[ 1.306256] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
294[ 1.348230] mmc0: new HS200 MMC card at address 0001
295[ 1.348901] mmcblk0: mmc0:0001 R311MB 14.7 GiB
296[ 1.352579] mmcblk0boot0: mmc0:0001 R311MB partition 1 4.00 MiB
297[ 1.356813] mmcblk0boot1: mmc0:0001 R311MB partition 2 4.00 MiB
298[ 1.362622] mmcblk0rpmb: mmc0:0001 R311MB partition 3 4.00 MiB, chardev (246:0)
299Trying to mount subpartitions for 10 seconds...
300[ 1.378116] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27
301[ 1.490438] random: fast init done
302Mount subpartitions of /dev/mmcblk0p24
303NOTE: Skipping framebuffer setup (deviceinfo_no_framebuffer)
304NOTE: Skipping framebuffer splashscreen (deviceinfo_no_framebuffer)
305Setup usb network
306 /sys/class/android_usb does not exist, skipping android_usb
307 Setting up an USB gadget through configfs
308[ 2.047078] using random self ethernet address
309[ 2.047112] using random host ethernet address
310[ 2.061077] usb0: HOST MAC 52:1b:2e:a7:a8:29
311[ 2.061269] usb0: MAC 9e:7a:ad:f7:a8:ae
312Starting udhcpd
313 Using interface usb0
314 Start the dhcpcd daemon (forks into background)
315Mount boot partition (/dev/dm-0)
316[ 2.198318] EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem
317[ 2.200095] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
318Extract /boot/initramfs-postmarketos-qcom-msm8916-extra_0018c61800b08b1388d95a731d7c714a
31931935 blocks
320Check/repair root filesystem (/dev/mapper/mmcblk0p24p2)
321e2fsck 1.45.5 (07-Jan-2020)
322pmOS_root: recovering journal
323Setting free inodes count to 314980 (was 314996)
324Setting free blocks count to 467351 (was 467372)
325pmOS_root: clean, 18460/333440 files, 158313/625664 blocks
326Resize root filesystem (/dev/mapper/mmcblk0p24p2)
327resize2fs 1.45.5 (07-Jan-2020)
328The filesystem is already 625664 (4k) blocks long. Nothing to do!
329
330Mount root partition (/dev/mapper/mmcblk0p24p2)
331[ 3.810730] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
332umount: can't unmount /dev: Invalid argument
333
334 OpenRC 0.42.1.6a467d4a81 is starting up Linux 5.5.0-rc7-postmarketos-qcom-msm8916 (aarch64)
335
336/lib/rc/sh/init.sh: line 15: can't create /dev/null: Read-only file system
337 * md5sum is missing, which suggests /usr is not mounted
338 * If you have separate /usr, it must be mounted by initramfs
339 * If not, you should check coreutils is installed correctly
340 * Mounting /proc ... [ ok ]
341 * Mounting /run ... * /run/openrc: creating directory
342 * /run/lock: creating directory
343 * /run/lock: correcting owner
344/lib/rc/sh/gendepends.sh: line 28: can't create /dev/null: Read-only file system
345 * Caching service dependencies ... [ ok ]
346 * Clock skew detected with `(null)'
347 * Adjusting mtime of `/run/openrc/deptree' to Thu Feb 13 12:45:36 2020
348
349 * WARNING: clock skew detected!
350 * Mounting devtmpfs on /dev ... [ ok ]
351 * Mounting /dev/mqueue ... [ ok ]
352 * Mounting /dev/pts ... [ ok ]
353 * Mounting /dev/shm ... [ ok ]
354 * Mount subpartitions of /dev/mmcblk0p24
355 * Mounting /sys ... [ ok ]
356 * Mounting security filesystem ... [ ok ]
357 * Mounting debug filesystem ... [ ok ]
358 * Mounting config filesystem ... [ ok ]
359 * Mounting persistent storage (pstore) filesystem ... [ ok ]
360 * Starting udev ... [ ok ]
361 * Generating a rule to create a /dev/root symlink ... [ ok ]
362 * Populating /dev with existing devices through uevents ... [ ok ]
363 * WARNING: clock skew detected!
364 * Loading modules ... [ ok ]
365 * Setting system clock using the hardware clock [UTC] ... [ ok ]
366 * Setting the local clock based on last shutdown time ... [ ok ]
367 * Checking local filesystems ...pmOS_root: clean, 18460/333440 files, 158313/625664 blocks
368pmOS_boot was not cleanly unmounted, check forced.
369pmOS_boot: 19/14112 files (36.8% non-contiguous), 37593/56320 blocks
370 * Filesystems repaired
371 [ !! ]
372 * Remounting root filesystem read/write ... [ ok ]
373 * Remounting filesystems ... [ ok ]
374 * Mounting local filesystems ... [ ok ]
375 * Configuring kernel parameters ...sysctl: error: 'net.ipv4.tcp_syncookies' is an unknown key
376 [ ok ]
377 * Creating user login records ... [ ok ]
378 * Wiping /tmp directory ... [ ok ]
379 * Setting hostname ... [ ok ]
380 * Starting busybox syslog ... [ ok ]
381 * WARNING: clock skew detected!
382 * Starting System Message Bus ... [ ok ]
383 * Starting RNG Daemon ... [ ok ]
384 * Could not find a wireless interface
385 * Starting WPA Supplicant ... [ ok ]
386 * Starting networkmanager ... [ ok ]
387 * Starting chronyd ... [ ok ]
388 * /run/lightdm: creating directory
389 * /run/lightdm: correcting owner
390 * Starting Display Manager ... [ ok ]
391 * Starting sshd ... [ ok ]
392 * Activating swap file ...Configured swap file size is 0, skipping creation.
393 [ ok ]
394 * Starting local ... [ ok ]