· 4 years ago · Sep 05, 2021, 05:42 PM
1root@OpenWrt:~# dmesg
2[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
3[ 0.000000] Linux version 5.10.61 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 10.3.0 r17471-b6cbbbb6ef) 10.3.0, GNU ld (GNU Binutils) 2.36.1) #0 SMP Sat Sep 4 19:05:26 2021
4[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
5[ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
6[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
7[ 0.000000] Zone ranges:
8[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
9[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
10[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
11[ 0.000000] Movable zone start for each node
12[ 0.000000] Early memory node ranges
13[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
14[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
15[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
16[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
17[ 0.000000] On node 0 totalpages: 2061312
18[ 0.000000] DMA zone: 3792 pages used for memmap
19[ 0.000000] DMA zone: 0 pages reserved
20[ 0.000000] DMA zone: 242688 pages, LIFO batch:63
21[ 0.000000] DMA32 zone: 12288 pages used for memmap
22[ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63
23[ 0.000000] Normal zone: 16384 pages used for memmap
24[ 0.000000] Normal zone: 1048576 pages, LIFO batch:63
25[ 0.000000] percpu: Embedded 21 pages/cpu s45208 r8192 d32616 u86016
26[ 0.000000] pcpu-alloc: s45208 r8192 d32616 u86016 alloc=21*4096
27[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
28[ 0.000000] Detected PIPT I-cache on CPU0
29[ 0.000000] CPU features: detected: Spectre-v2
30[ 0.000000] CPU features: detected: Spectre-v4
31[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848
32[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=E4:5F:01:38:C6:B7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
33[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
34[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
35[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
36[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
37[ 0.000000] Memory: 7941872K/8245248K available (7806K kernel code, 890K rwdata, 2012K rodata, 448K init, 549K bss, 237840K reserved, 65536K cma-reserved)
38[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
39[ 0.000000] rcu: Hierarchical RCU implementation.
40[ 0.000000] Tracing variant of Tasks RCU enabled.
41[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
42[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
43[ 0.000000] GIC: Using split EOI/Deactivate mode
44[ 0.000000] random: get_random_bytes called from start_kernel+0x2cc/0x458 with crng_init=0
45[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
46[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
47[ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
48[ 0.000170] Console: colour dummy device 80x25
49[ 0.000478] printk: console [tty1] enabled
50[ 0.000514] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
51[ 0.000540] pid_max: default: 32768 minimum: 301
52[ 0.000807] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
53[ 0.000955] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
54[ 0.001579] cgroup: Disabling memory control group subsystem
55[ 0.002488] rcu: Hierarchical SRCU implementation.
56[ 0.002657] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
57[ 0.003172] smp: Bringing up secondary CPUs ...
58[ 0.003574] Detected PIPT I-cache on CPU1
59[ 0.003638] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
60[ 0.004111] Detected PIPT I-cache on CPU2
61[ 0.004152] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
62[ 0.004596] Detected PIPT I-cache on CPU3
63[ 0.004636] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
64[ 0.004710] smp: Brought up 1 node, 4 CPUs
65[ 0.004770] SMP: Total of 4 processors activated.
66[ 0.004785] CPU features: detected: 32-bit EL0 Support
67[ 0.004799] CPU features: detected: CRC32 instructions
68[ 0.004866] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
69[ 0.004884] CPU: All CPU(s) started at EL2
70[ 0.004916] alternatives: patching kernel code
71[ 0.013472] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
72[ 0.013518] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
73[ 0.015336] pinctrl core: initialized pinctrl subsystem
74[ 0.016376] NET: Registered protocol family 16
75[ 0.017927] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
76[ 0.018171] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
77[ 0.018656] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
78[ 0.019058] thermal_sys: Registered thermal governor 'step_wise'
79[ 0.019372] cpuidle: using governor ladder
80[ 0.019413] cpuidle: using governor menu
81[ 0.019625] ASID allocator initialised with 65536 entries
82[ 0.019709] Serial: AMBA PL011 UART driver
83[ 0.031818] bcm2835-mbox fe00b880.mailbox: mailbox enabled
84[ 0.049987] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-08-19T12:27:01, variant start
85[ 0.059998] raspberrypi-firmware soc:firmware: Firmware hash is ef2c018dccdeb94b0376db62a2ea4c882f9b500d
86[ 0.087664] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
87[ 0.089563] SCSI subsystem initialized
88[ 0.089711] usbcore: registered new interface driver usbfs
89[ 0.089754] usbcore: registered new interface driver hub
90[ 0.089796] usbcore: registered new device driver usb
91[ 0.089923] usb_phy_generic phy: supply vcc not found, using dummy regulator
92[ 0.091138] clocksource: Switched to clocksource arch_sys_counter
93[ 0.094354] NET: Registered protocol family 2
94[ 0.095340] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
95[ 0.100918] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
96[ 0.101014] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
97[ 0.101490] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
98[ 0.102502] TCP: Hash tables configured (established 65536 bind 65536)
99[ 0.102775] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
100[ 0.102903] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
101[ 0.103227] NET: Registered protocol family 1
102[ 0.103270] PCI: CLS 0 bytes, default 64
103[ 0.104724] workingset: timestamp_bits=46 max_order=21 bucket_order=0
104[ 0.108534] squashfs: version 4.0 (2009/01/31) Phillip Lougher
105[ 0.174837] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
106[ 0.176901] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
107[ 0.176933] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
108[ 0.176971] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
109[ 0.177010] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000
110[ 0.233211] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
111[ 0.233386] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
112[ 0.233406] pci_bus 0000:00: root bus resource [bus 00-ff]
113[ 0.233425] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
114[ 0.233480] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
115[ 0.233559] pci 0000:00:00.0: PME# supported from D0 D3hot
116[ 0.236983] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
117[ 0.237066] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
118[ 0.237244] pci 0000:01:00.0: PME# supported from D0 D3hot
119[ 0.240457] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
120[ 0.240480] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
121[ 0.240541] pci 0000:00:00.0: PCI bridge to [bus 01]
122[ 0.240558] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
123[ 0.240733] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
124[ 0.240858] pcieport 0000:00:00.0: PME: Signaling with IRQ 45
125[ 0.241109] pcieport 0000:00:00.0: AER: enabled with IRQ 45
126[ 0.241534] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
127[ 0.241563] bcm2708_fb: probe of soc:fb failed with error -2
128[ 0.243709] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
129[ 0.244537] iproc-rng200 fe104000.rng: hwrng registered
130[ 0.244656] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
131[ 0.244739] random: fast init done
132[ 0.245049] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
133[ 0.245124] random: crng init done
134[ 0.245285] cacheinfo: Unable to detect cache hierarchy for CPU 0
135[ 0.251851] brd: module loaded
136[ 0.255076] loop: module loaded
137[ 0.255737] Loading iSCSI transport class v2.0-870.
138[ 0.257218] libphy: Fixed MDIO Bus: probed
139[ 0.257637] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
140[ 0.271144] libphy: bcmgenet MII bus: probed
141[ 0.391188] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
142[ 0.439496] xhci_hcd 0000:01:00.0: xHCI Host Controller
143[ 0.439531] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
144[ 0.440086] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
145[ 0.440749] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
146[ 0.440772] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
147[ 0.440790] usb usb1: Product: xHCI Host Controller
148[ 0.440804] usb usb1: Manufacturer: Linux 5.10.61 xhci-hcd
149[ 0.440817] usb usb1: SerialNumber: 0000:01:00.0
150[ 0.441174] hub 1-0:1.0: USB hub found
151[ 0.441246] hub 1-0:1.0: 1 port detected
152[ 0.441677] xhci_hcd 0000:01:00.0: xHCI Host Controller
153[ 0.441700] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
154[ 0.441724] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
155[ 0.441955] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
156[ 0.441975] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
157[ 0.441991] usb usb2: Product: xHCI Host Controller
158[ 0.442005] usb usb2: Manufacturer: Linux 5.10.61 xhci-hcd
159[ 0.442018] usb usb2: SerialNumber: 0000:01:00.0
160[ 0.442327] hub 2-0:1.0: USB hub found
161[ 0.442371] hub 2-0:1.0: 4 ports detected
162[ 0.443099] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
163[ 0.443189] dwc_otg: FIQ enabled
164[ 0.443194] dwc_otg: NAK holdoff enabled
165[ 0.443199] dwc_otg: FIQ split-transaction FSM enabled
166[ 0.443206] Module dwc_common_port init
167[ 0.443472] usbcore: registered new interface driver uas
168[ 0.443538] usbcore: registered new interface driver usb-storage
169[ 0.443612] mousedev: PS/2 mouse device common for all mice
170[ 0.444091] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
171[ 0.445492] sdhci: Secure Digital Host Controller Interface driver
172[ 0.445509] sdhci: Copyright(c) Pierre Ossman
173[ 0.445870] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
174[ 0.446263] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
175[ 0.446279] sdhci-pltfm: SDHCI platform and OF driver helper
176[ 0.453249] NET: Registered protocol family 10
177[ 0.453679] Segment Routing with IPv6
178[ 0.453714] NET: Registered protocol family 17
179[ 0.453736] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
180[ 0.453745] 8021q: 802.1Q VLAN Support v1.8
181[ 0.453961] Key type ._fscrypt registered
182[ 0.453968] Key type .fscrypt registered
183[ 0.453972] Key type fscrypt-provisioning registered
184[ 0.456587] uart-pl011 fe201000.serial: there is not valid maps for state default
185[ 0.456657] uart-pl011 fe201000.serial: cts_event_workaround enabled
186[ 0.456709] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
187[ 1.535050] printk: console [ttyAMA0] enabled
188[ 1.543147] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
189[ 1.550650] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
190[ 1.556664] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
191[ 1.588511] of_cfs_init
192[ 1.591040] of_cfs_init: OK
193[ 1.616646] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
194[ 1.623622] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
195[ 1.630579] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
196[ 1.634802] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
197[ 1.638741] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
198[ 1.643367] Waiting for root device /dev/mmcblk0p2...
199[ 1.650112] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
200[ 1.681143] usb 1-1: new high-speed USB device number 2 using xhci_hcd
201[ 1.719196] mmc1: new high speed SDIO card at address 0001
202[ 1.764924] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
203[ 1.771874] mmcblk0: mmc0:aaaa SE32G 29.7 GiB
204[ 1.776861] mmcblk0: p1 p2
205[ 1.806285] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
206[ 1.813838] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
207[ 1.820940] Freeing unused kernel memory: 448K
208[ 1.851236] Run /sbin/init as init process
209[ 1.855334] with arguments:
210[ 1.855339] /sbin/init
211[ 1.855344] with environment:
212[ 1.855349] HOME=/
213[ 1.855353] TERM=linux
214[ 1.863757] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
215[ 1.871984] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
216[ 1.879124] usb 1-1: Product: USB2.0 Hub
217[ 1.884361] hub 1-1:1.0: USB hub found
218[ 1.888332] hub 1-1:1.0: 4 ports detected
219[ 1.908053] init: Console is alive
220[ 1.911561] init: - watchdog -
221[ 2.001636] kmodloader: loading kernel modules from /etc/modules-boot.d/*
222[ 2.011082] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
223[ 2.025873] init: - preinit -
224[ 2.089866] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
225[ 2.098358] bcmgenet fd580000.ethernet eth0: Link is Down
226[ 6.151361] mount_root: mounting /dev/root
227[ 6.157552] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
228[ 6.183768] urandom-seed: Seed file not found (/etc/urandom.seed)
229[ 6.214338] procd: - early -
230[ 6.217277] procd: - watchdog -
231[ 6.744509] procd: - watchdog -
232[ 6.748544] procd: - ubus -
233[ 6.803182] procd: - init -
234[ 6.807221] uart-pl011 fe201000.serial: no DMA platform data
235[ 6.887163] kmodloader: loading kernel modules from /etc/modules.d/*
236[ 6.909903] hid: raw HID events driver (C) Jiri Kosina
237[ 6.915952] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
238[ 6.933772] Loading modules backported from Linux version v5.10.42-0-g65859eca4dff
239[ 6.941480] Backport generated by backports.git v5.10.42-1-0-gbee5c545
240[ 6.951540] usbcore: registered new interface driver usbhid
241[ 6.957118] usbhid: USB HID core driver
242[ 6.963555] xt_time: kernel timezone is -0000
243[ 6.968322] usbcore: registered new interface driver ax88179_178a
244[ 6.987556] PPP generic driver version 2.4.2
245[ 6.992340] NET: Registered protocol family 24
246[ 7.007109] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
247[ 7.174228] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
248[ 7.192482] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:20:01 version 7.45.206 (r725000 CY) FWID 01-febaba43
249[ 7.233259] usbcore: registered new interface driver brcmfmac
250[ 7.241330] kmodloader: done loading kernel modules from /etc/modules.d/*
251[ 11.237967] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
252[ 11.246632] br-lan: port 1(eth0) entered blocking state
253[ 11.247353] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
254[ 11.251885] br-lan: port 1(eth0) entered disabled state
255[ 11.265438] device eth0 entered promiscuous mode
256[ 11.270921] br-lan: port 1(eth0) entered blocking state
257[ 11.276176] br-lan: port 1(eth0) entered forwarding state
258[ 12.311232] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
259[ 80.531726] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
260[ 80.568372] usb 2-1: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 1.00
261[ 80.576566] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
262[ 80.583720] usb 2-1: Product: AX88179
263[ 80.587380] usb 2-1: Manufacturer: ASIX Elec. Corp.
264[ 80.592298] usb 2-1: SerialNumber: 00806D970FB3AB
265[ 80.959508] ax88179_178a 2-1:1.0 eth1: register 'ax88179_178a' at usb-0000:01:00.0-1, ASIX AX88179 USB 3.0 Gigabit Ethernet, 80:6d:97:0f:b3:ab
266[ 113.191264] bcmgenet fd580000.ethernet eth0: Link is Down
267[ 113.196964] br-lan: port 1(eth0) entered disabled state
268[ 161.031308] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
269[ 161.039629] br-lan: port 1(eth0) entered blocking state
270[ 161.044950] br-lan: port 1(eth0) entered forwarding state
271