· 6 years ago · Mar 26, 2020, 02:20 PM
1[ 0.000000] Booting Linux on physical CPU 0x0
2[ 0.000000] Linux version 5.1.0 (pbuilder@devuan-maemo-build-armv7) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 Fri Jan 24 15:11:01 UTC 2020
3[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=50c5387d
4[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
5[ 0.000000] OF: fdt: Machine model: Nokia N900
6[ 0.000000] Memory policy: Data cache writeback
7[ 0.000000] cma: Reserved 16 MiB at 0x8e800000
8[ 0.000000] On node 0 totalpages: 65280
9[ 0.000000] Normal zone: 574 pages used for memmap
10[ 0.000000] Normal zone: 0 pages reserved
11[ 0.000000] Normal zone: 65280 pages, LIFO batch:15
12[ 0.000000] CPU: All CPU(s) started in SVC mode.
13[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp)
14[ 0.000000] random: get_random_bytes called from start_kernel+0x67/0x324 with crng_init=0
15[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
16[ 0.000000] pcpu-alloc: [0] 0
17[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64706
18[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait console=tty1
19[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
20[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
21[ 0.000000] Memory: 233856K/261120K available (4096K kernel code, 443K rwdata, 1508K rodata, 1024K init, 389K bss, 10880K reserved, 16384K cma-reserved, 0K highmem)
22[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
23[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
24[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 4.0) with 96 interrupts
25[ 0.000000] Clocking rate (Crystal/Core/MPU): 19.2/332/500 MHz
26[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
27[ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
28[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
29[ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz
30[ 0.000885] Console: colour dummy device 80x30
31[ 0.001312] printk: console [tty1] enabled
32[ 0.001403] Calibrating delay loop... 493.97 BogoMIPS (lpj=1234944)
33[ 0.033020] pid_max: default: 32768 minimum: 301
34[ 0.033264] LSM: Security Framework initializing
35[ 0.033447] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
36[ 0.033508] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
37[ 0.034484] *** VALIDATE proc ***
38[ 0.034912] *** VALIDATE cgroup1 ***
39[ 0.034942] *** VALIDATE cgroup2 ***
40[ 0.034973] CPU: Testing write buffer coherency: ok
41[ 0.035095] CPU0: Spectre v2: using BPIALL workaround
42[ 0.036346] Setting up static identity map for 0x80100000 - 0x80100054
43[ 0.039581] devtmpfs: initialized
44[ 0.071166] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
45[ 0.071624] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
46[ 0.071685] futex hash table entries: 256 (order: -1, 3072 bytes)
47[ 0.073913] pinctrl core: initialized pinctrl subsystem
48[ 0.075683] NET: Registered protocol family 16
49[ 0.079956] DMA: preallocated 256 KiB pool for atomic coherent allocations
50[ 0.098510] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
51[ 0.099121] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
52[ 0.135589] audit: initializing netlink subsys (disabled)
53[ 0.137115] cpuidle: using governor menu
54[ 0.137634] Reprogramming SDRC clock to 332000000 Hz
55[ 0.142547] audit: type=2000 audit(0.135:1): state=initialized audit_enabled=0 res=1
56[ 0.143829] gpio gpiochip0: (gpio-0-31): added GPIO chardev (254:0)
57[ 0.143981] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio-0-31)
58[ 0.144042] OMAP GPIO hardware version 2.5
59[ 0.145172] gpio gpiochip1: (gpio-32-63): added GPIO chardev (254:1)
60[ 0.145324] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio-32-63)
61[ 0.146392] gpio gpiochip2: (gpio-64-95): added GPIO chardev (254:2)
62[ 0.146545] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio-64-95)
63[ 0.147644] gpio gpiochip3: (gpio-96-127): added GPIO chardev (254:3)
64[ 0.147796] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio-96-127)
65[ 0.148864] gpio gpiochip4: (gpio-128-159): added GPIO chardev (254:4)
66[ 0.148986] gpiochip_setup_dev: registered GPIOs 128 to 159 on device: gpiochip4 (gpio-128-159)
67[ 0.150054] gpio gpiochip5: (gpio-160-191): added GPIO chardev (254:5)
68[ 0.150207] gpiochip_setup_dev: registered GPIOs 160 to 191 on device: gpiochip5 (gpio-160-191)
69[ 0.166809] RX-51: Enabling ARM errata 430973 workaround
70[ 0.168762] RX-51: Registering OMAP3 HWRNG device
71[ 0.169219] hw-breakpoint: debug architecture 0x4 unsupported.
72[ 0.171325] Reserving DMA channels 0 and 1 for HS ROM code
73[ 0.171386] OMAP DMA hardware revision 4.0
74[ 0.201080] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
75[ 0.208740] omap-iommu 480bd400.mmu: 480bd400.mmu registered
76[ 0.209350] platform 480bc000.isp: Adding to iommu group 0
77[ 0.210144] SCSI subsystem initialized
78[ 0.210906] pps_core: LinuxPPS API ver. 1 registered
79[ 0.210937] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
80[ 0.210998] PTP clock support registered
81[ 0.212615] clocksource: Switched to clocksource 32k_counter
82[ 0.280181] VFS: Disk quotas dquot_6.6.0
83[ 0.280334] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
84[ 0.297576] NET: Registered protocol family 2
85[ 0.298858] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
86[ 0.298950] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
87[ 0.299041] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
88[ 0.299102] TCP: Hash tables configured (established 2048 bind 2048)
89[ 0.299285] UDP hash table entries: 256 (order: 0, 4096 bytes)
90[ 0.299346] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
91[ 0.299621] NET: Registered protocol family 1
92[ 0.302429] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
93[ 0.309448] Initialise system trusted keyrings
94[ 0.309875] workingset: timestamp_bits=14 max_order=16 bucket_order=2
95[ 0.335113] NET: Registered protocol family 38
96[ 0.335174] Key type asymmetric registered
97[ 0.335205] Asymmetric key parser 'x509' registered
98[ 0.335327] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
99[ 0.335388] io scheduler mq-deadline registered
100[ 0.335388] io scheduler kyber registered
101[ 0.338012] ti-sysc 480cb024.target-module: sysc_flags 00000100 != 00000110
102[ 0.339355] ti-sysc 480c9024.target-module: sysc_flags 00000100 != 00000110
103[ 0.342407] pinctrl-single 48002030.pinmux: 284 pins, size 568
104[ 0.343231] pinctrl-single 48002a00.pinmux: 46 pins, size 92
105[ 0.344055] pinctrl-single 480025d8.pinmux: 18 pins, size 36
106[ 0.347320] omapdss_dss 48050000.dss: 48050000.dss supply vdda_video not found, using dummy regulator
107[ 0.347656] OMAP DSS rev 2.0
108[ 0.347930] omapdss_dss 48050000.dss: bound 48050400.dispc (ops 0xc052aa6c)
109[ 0.348266] omapdss_dss 48050000.dss: bound 48050c00.encoder (ops 0xc052b6e4)
110[ 0.349853] omapfb omapfb: failed to connect default display
111[ 0.349914] omapfb omapfb: failed to init overlay connections
112[ 0.350128] omapfb omapfb: failed to setup omapfb
113[ 0.353515] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
114[ 0.358062] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a 8250
115[ 0.358459] serial serial0: tty port ttyS1 registered
116[ 0.359405] 49020000.serial: ttyS2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a 8250
117[ 0.380157] brd: module loaded
118[ 0.394226] loop: module loaded
119[ 0.396026] mtdoops: mtd device (mtddev=name/number) must be supplied
120[ 0.399230] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ocp@68000000/spi@48098000/acx565akm@2[0]' - status (0)
121[ 0.412200] acx565akm spi0.2: omapfb: acx565akm rev ab LCD detected
122[ 0.417419] i2c /dev entries driver
123[ 0.418121] ti-soc-thermal 48002524.bandgap: This OMAP thermal sensor is unreliable. You've been warned
124[ 0.418212] ti-soc-thermal 48002524.bandgap: Non-trimmed BGAP, Temp not accurate
125[ 0.420440] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
126[ 0.422454] sdhci: Secure Digital Host Controller Interface driver
127[ 0.422515] sdhci: Copyright(c) Pierre Ossman
128[ 0.423461] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd
129[ 0.423492] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
130[ 0.423522] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp@68000000/mmc@4809c000[0]'
131[ 0.423553] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp@68000000/mmc@4809c000[0]'
132[ 0.423583] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
133[ 0.423583] omap_hsmmc 4809c000.mmc: No GPIO consumer cd found
134[ 0.423614] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp
135[ 0.423614] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
136[ 0.423645] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp@68000000/mmc@4809c000[0]'
137[ 0.423675] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp@68000000/mmc@4809c000[0]'
138[ 0.423675] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
139[ 0.423675] omap_hsmmc 4809c000.mmc: No GPIO consumer wp found
140[ 0.424682] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp
141[ 0.424713] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup
142[ 0.424743] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp@68000000/mmc@480b4000[0]'
143[ 0.424774] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp@68000000/mmc@480b4000[0]'
144[ 0.424774] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup
145[ 0.424804] omap_hsmmc 480b4000.mmc: No GPIO consumer wp found
146[ 0.425659] sdhci-pltfm: SDHCI platform and OF driver helper
147[ 0.426055] ledtrig-cpu: registered to indicate activity on CPUs
148[ 0.429748] oprofile: using arm/armv7
149[ 0.431335] Initializing XFRM netlink socket
150[ 0.432434] NET: Registered protocol family 10
151[ 0.434143] Segment Routing with IPv6
152[ 0.434356] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
153[ 0.435516] NET: Registered protocol family 17
154[ 0.435577] NET: Registered protocol family 15
155[ 0.435668] Key type dns_resolver registered
156[ 0.435791] ThumbEE CPU extension supported.
157[ 0.435913] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
158[ 0.435943] omap2_set_init_voltage: unable to set vdd_mpu_iva
159[ 0.436004] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
160[ 0.436035] omap2_set_init_voltage: unable to set vdd_core
161[ 0.439575] SmartReflex Class3 initialized
162[ 0.440734] Loading compiled-in X.509 certificates
163[ 0.441345] zswap: default zpool zbud not available
164[ 0.441406] zswap: pool creation failed
165[ 0.467041] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
166[ 0.467102] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
167[ 0.467193] gpiochip_find_base: found new base at 508
168[ 0.467620] gpio gpiochip6: (omap-gpmc): added GPIO chardev (254:6)
169[ 0.467895] gpiochip_setup_dev: registered GPIOs 508 to 511 on device: gpiochip6 (omap-gpmc)
170[ 0.468994] omap2-onenand 1000000.onenand: GPIO lookup for consumer int
171[ 0.469024] omap2-onenand 1000000.onenand: using device tree for GPIO lookup
172[ 0.469055] of_get_named_gpiod_flags: can't parse 'int-gpios' property of node '/ocp@68000000/gpmc@6e000000/onenand@0,0[0]'
173[ 0.469085] of_get_named_gpiod_flags: can't parse 'int-gpio' property of node '/ocp@68000000/gpmc@6e000000/onenand@0,0[0]'
174[ 0.469116] omap2-onenand 1000000.onenand: using lookup tables for GPIO lookup
175[ 0.469116] omap2-onenand 1000000.onenand: No GPIO consumer int found
176[ 0.469177] omap2-onenand 1000000.onenand: initializing on CS0 (0x01000000), va (ptrval), DMA mode
177[ 0.469238] OneNAND Manufacturer: Unknown (0xa0)
178[ 0.473907] Skipping twl internal clock init and using bootloader value (unknown osc rate)
179[ 0.477783] twl 1-0048: PIH (irq 23) chaining IRQs 146..154
180[ 0.477905] twl 1-0048: power (irq 151) chaining IRQs 154..161
181[ 0.479736] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
182[ 0.482330] twl_rtc 48070000.i2c:twl@48:rtc: registered as rtc0
183[ 0.488281] random: fast init done
184[ 0.519775] twl4030_gpio twl4030-gpio: gpio (irq 146) chaining IRQs 162..179
185[ 0.520141] gpiochip_find_base: found new base at 490
186[ 0.522827] gpio gpiochip7: (twl4030): added GPIO chardev (254:7)
187[ 0.522979] gpiochip_setup_dev: registered GPIOs 490 to 507 on device: gpiochip7 (twl4030)
188[ 0.526428] input: TWL4030 Keypad as /devices/platform/68000000.ocp/48070000.i2c/i2c-1/1-0048/48070000.i2c:twl@48:keypad/input/input0
189[ 0.559417] omap_i2c 48070000.i2c: bus 1 rev3.3 at 2200 kHz
190[ 0.563079] omap_i2c 48072000.i2c: bus 2 rev3.3 at 100 kHz
191[ 0.565246] omap_i2c 48060000.i2c: bus 3 rev3.3 at 400 kHz
192[ 0.591308] Console: switching to colour frame buffer device 100x30
193[ 0.668060] omapfb omapfb: using display 'lcd' mode 800x480
194[ 0.674774] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd
195[ 0.674774] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
196[ 0.674835] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp@68000000/mmc@4809c000[0]'
197[ 0.674835] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp@68000000/mmc@4809c000[0]'
198[ 0.674865] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
199[ 0.674865] omap_hsmmc 4809c000.mmc: No GPIO consumer cd found
200[ 0.674896] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp
201[ 0.674896] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
202[ 0.674926] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp@68000000/mmc@4809c000[0]'
203[ 0.674957] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp@68000000/mmc@4809c000[0]'
204[ 0.674987] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
205[ 0.674987] omap_hsmmc 4809c000.mmc: No GPIO consumer wp found
206[ 0.703796] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp
207[ 0.703826] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup
208[ 0.703857] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp@68000000/mmc@480b4000[0]'
209[ 0.703887] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp@68000000/mmc@480b4000[0]'
210[ 0.703887] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup
211[ 0.703918] omap_hsmmc 480b4000.mmc: No GPIO consumer wp found
212[ 0.734191] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2020-03-26T15:44:52 UTC (1585237492)
213[ 0.747558] smartreflex 480cb000.smartreflex: omap_sr_probe: SmartReflex driver initialized
214[ 0.754821] smartreflex 480c9000.smartreflex: omap_sr_probe: SmartReflex driver initialized
215[ 0.763793] VCSI: disabling
216[ 0.771057] VDAC: disabling
217[ 0.777709] VUSB1V5: disabling
218[ 0.784301] VUSB1V8: disabling
219[ 0.790588] VUSB3V1: disabling
220[ 0.796691] Waiting for root device /dev/mmcblk0p2...
221[ 0.956359] mmc1: switch to bus width 8 failed
222[ 0.962249] mmc1: switch to bus width 4 failed
223[ 0.967498] mmc1: new high speed MMC card at address 0001
224[ 0.975128] mmcblk1: mmc1:0001 MMC32G 29.8 GiB
225[ 0.981811] mmcblk1boot0: mmc1:0001 MMC32G partition 1 512 KiB
226[ 0.988708] mmcblk1boot1: mmc1:0001 MMC32G partition 2 512 KiB
227[ 0.996215] mmcblk1: p1 p2 p3
228[ 1.001373] mmc0: host does not support reading read-only switch, assuming write-enable
229[ 1.015808] mmc0: new high speed SDHC card at address aaaa
230[ 1.023132] mmcblk0: mmc0:aaaa SA08G 7.40 GiB
231[ 1.032104] mmcblk0: p1 p2
232[ 1.068267] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
233[ 1.074066] VFS: Mounted root (ext4 filesystem) readonly on device 179:26.
234[ 1.090484] devtmpfs: mounted
235[ 1.099273] Freeing unused kernel memory: 1024K
236[ 1.104949] Run /sbin/init as init process
237[ 6.599395] udevd[458]: starting version 3.2.7
238[ 6.653320] random: udevd: uninitialized urandom read (16 bytes read)
239[ 6.666320] random: udevd: uninitialized urandom read (16 bytes read)
240[ 6.683319] random: udevd: uninitialized urandom read (16 bytes read)
241[ 6.715057] udevd[458]: specified group 'kvm' unknown
242[ 6.834960] udevd[458]: starting eudev-3.2.7
243[ 7.049957] udevd[458]: specified group 'kvm' unknown
244[ 7.787902] omap_ssi 48058000.ssi-controller: ssi controller 0 initialized (1 ports)!
245[ 7.805755] media: Linux media interface: v0.10
246[ 7.848846] omap_ssi_port 4805a000.ssi-port: GPIO lookup for consumer ti,ssi-cawake
247[ 7.848846] omap_ssi_port 4805a000.ssi-port: using device tree for GPIO lookup
248[ 7.848907] of_get_named_gpiod_flags: can't parse 'ti,ssi-cawake-gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000[0]'
249[ 7.848968] of_get_named_gpiod_flags: parsed 'ti,ssi-cawake-gpio' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000[0]' - status (0)
250[ 7.849029] gpio gpiochip4: Persistence not supported for GPIO 23
251[ 7.881164] omap_ssi_port 4805a000.ssi-port: ssi port 0 successfully initialized
252[ 7.928100] lis3lv02d: 8 bits sensor found
253[ 8.038177] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input1
254[ 8.050231] usbcore: registered new interface driver usbfs
255[ 8.089691] twl4030_madc 48070000.i2c:twl@48:madc: 48070000.i2c:twl@48:madc supply vusb3v1 not found, using dummy regulator
256[ 8.124664] input: twl4030:vibrator as /devices/platform/68000000.ocp/48070000.i2c/i2c-1/1-0048/48070000.i2c:twl@48:audio/twl4030-vibra/input/input2
257[ 8.142608] videodev: Linux video capture interface: v2.00
258[ 8.163177] usbcore: registered new interface driver hub
259[ 8.229034] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-1/1-0048/48070000.i2c:twl@48:pwrbutton/input/input3
260[ 8.255584] usbcore: registered new device driver usb
261[ 8.292266] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
262[ 8.369964] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
263[ 8.383178] Bluetooth: Core ver 2.22
264[ 8.410186] ehci-omap: OMAP-EHCI Host Controller driver
265[ 8.430175] et8ek8 3-003e: GPIO lookup for consumer reset
266[ 8.430175] et8ek8 3-003e: using device tree for GPIO lookup
267[ 8.430236] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]'
268[ 8.430297] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]' - status (0)
269[ 8.430389] gpio gpiochip3: Persistence not supported for GPIO 6
270[ 8.430664] et8ek8 3-003e: could not get clock
271[ 8.507080] ohci-platform: OHCI generic platform driver
272[ 8.516510] NET: Registered protocol family 31
273[ 8.524536] Bluetooth: HCI device and connection manager initialized
274[ 8.548553] ehci-omap 48064800.ehci: EHCI Host Controller
275[ 8.563476] et8ek8 3-003e: GPIO lookup for consumer reset
276[ 8.563476] et8ek8 3-003e: using device tree for GPIO lookup
277[ 8.563537] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]'
278[ 8.563568] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]' - status (0)
279[ 8.563659] gpio gpiochip3: Persistence not supported for GPIO 6
280[ 8.563903] et8ek8 3-003e: could not get clock
281[ 8.633453] ohci-platform 48064400.ohci: Generic Platform OHCI controller
282[ 8.642852] ehci-omap 48064800.ehci: new USB bus registered, assigned bus number 1
283[ 8.702880] Bluetooth: HCI socket layer initialized
284[ 8.725555] ehci-omap 48064800.ehci: irq 93, io mem 0x48064800
285[ 8.738037] ohci-platform 48064400.ohci: new USB bus registered, assigned bus number 2
286[ 8.779418] Bluetooth: L2CAP socket layer initialized
287[ 8.792388] ohci-platform 48064400.ohci: irq 92, io mem 0x48064400
288[ 8.807891] ehci-omap 48064800.ehci: USB 2.0 started, EHCI 1.00
289[ 8.864837] Bluetooth: SCO socket layer initialized
290[ 8.884368] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
291[ 8.891571] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
292[ 8.898437] usb usb1: Product: EHCI Host Controller
293[ 8.905059] usb usb1: Manufacturer: Linux 5.1.0 ehci_hcd
294[ 8.911437] usb usb1: SerialNumber: 48064800.ehci
295[ 8.924499] tsl2563 2-0029: model 7, rev. 0
296[ 9.002502] of_get_named_gpiod_flags: parsed 'enable-gpio' property of node '/ocp@68000000/i2c@48072000/lp5523@32[0]' - status (0)
297[ 9.033569] et8ek8 3-003e: GPIO lookup for consumer reset
298[ 9.033599] et8ek8 3-003e: using device tree for GPIO lookup
299[ 9.033630] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]'
300[ 9.033691] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]' - status (0)
301[ 9.033782] gpio gpiochip3: Persistence not supported for GPIO 6
302[ 9.034057] et8ek8 3-003e: could not get clock
303[ 9.056793] power_supply bq27200-0: Not all required supplies found, defer probe
304[ 9.063385] bq27xxx-battery 2-0055: failed to register battery
305[ 9.083770] Bluetooth: HCI UART driver ver 2.3
306[ 9.090332] Bluetooth: HCI UART protocol H4 registered
307[ 9.096618] Bluetooth: HCI UART protocol BCSP registered
308[ 9.113372] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Initialized TWL4030 USB module
309[ 9.142028] et8ek8 3-003e: GPIO lookup for consumer reset
310[ 9.142059] et8ek8 3-003e: using device tree for GPIO lookup
311[ 9.142089] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]'
312[ 9.142150] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]' - status (0)
313[ 9.142242] gpio gpiochip3: Persistence not supported for GPIO 6
314[ 9.142547] et8ek8 3-003e: could not get clock
315[ 9.184417] et8ek8 3-003e: GPIO lookup for consumer reset
316[ 9.184448] et8ek8 3-003e: using device tree for GPIO lookup
317[ 9.184478] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]'
318[ 9.184539] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]' - status (0)
319[ 9.184631] gpio gpiochip3: Persistence not supported for GPIO 6
320[ 9.184875] et8ek8 3-003e: could not get clock
321[ 9.199951] si4713 2-0063: GPIO lookup for consumer reset
322[ 9.199981] si4713 2-0063: using device tree for GPIO lookup
323[ 9.200042] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ocp@68000000/i2c@48072000/si4713@63[0]' - status (0)
324[ 9.200073] gpio gpiochip5: Persistence not supported for GPIO 3
325[ 9.218383] power_supply bq27200-0: Not all required supplies found, defer probe
326[ 9.224884] bq27xxx-battery 2-0055: failed to register battery
327[ 9.233032] Bluetooth: HCI UART protocol LL registered
328[ 9.242370] hub 1-0:1.0: USB hub found
329[ 9.262115] Bluetooth: HCI UART protocol Three-wire (H5) registered
330[ 9.269500] hub 1-0:1.0: 3 ports detected
331[ 9.279632] of_get_named_gpiod_flags: parsed 'power-gpio' property of node '/ocp@68000000/i2c@48072000/tpa6130a2@60[0]' - status (0)
332[ 9.285156] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ocp@68000000/i2c@48072000/tlv320aic3x@18[0]' - status (0)
333[ 9.289031] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ocp@68000000/i2c@48072000/tlv320aic3x@19[0]' - status (0)
334[ 9.296386] Bluetooth: HCI UART protocol Broadcom registered
335[ 9.303039] et8ek8 3-003e: GPIO lookup for consumer reset
336[ 9.303039] et8ek8 3-003e: using device tree for GPIO lookup
337[ 9.303100] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]'
338[ 9.303131] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]' - status (0)
339[ 9.303192] gpio gpiochip3: Persistence not supported for GPIO 6
340[ 9.303436] et8ek8 3-003e: could not get clock
341[ 9.310882] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
342[ 9.317108] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
343[ 9.323150] usb usb2: Product: Generic Platform OHCI controller
344[ 9.329132] usb usb2: Manufacturer: Linux 5.1.0 ohci_hcd
345[ 9.334991] usb usb2: SerialNumber: 48064400.ohci
346[ 9.368469] power_supply bq27200-0: Not all required supplies found, defer probe
347[ 9.374816] bq27xxx-battery 2-0055: failed to register battery
348[ 9.387664] nokia-bluetooth serial0-0: GPIO lookup for consumer reset
349[ 9.387695] nokia-bluetooth serial0-0: using device tree for GPIO lookup
350[ 9.387847] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ocp@68000000/serial@4806c000/bluetooth[0]' - status (0)
351[ 9.387878] gpio gpiochip2: Persistence not supported for GPIO 27
352[ 9.387908] nokia-bluetooth serial0-0: GPIO lookup for consumer host-wakeup
353[ 9.387939] nokia-bluetooth serial0-0: using device tree for GPIO lookup
354[ 9.387969] of_get_named_gpiod_flags: parsed 'host-wakeup-gpios' property of node '/ocp@68000000/serial@4806c000/bluetooth[0]' - status (0)
355[ 9.388000] gpio gpiochip3: Persistence not supported for GPIO 5
356[ 9.401489] nokia-bluetooth serial0-0: GPIO lookup for consumer bluetooth-wakeup
357[ 9.401489] nokia-bluetooth serial0-0: using device tree for GPIO lookup
358[ 9.401580] of_get_named_gpiod_flags: parsed 'bluetooth-wakeup-gpios' property of node '/ocp@68000000/serial@4806c000/bluetooth[0]' - status (0)
359[ 9.401611] gpio gpiochip1: Persistence not supported for GPIO 5
360[ 9.406036] omap-mailbox 48094000.mailbox: omap mailbox rev 0x40
361[ 9.439392] et8ek8 3-003e: GPIO lookup for consumer reset
362[ 9.439392] et8ek8 3-003e: using device tree for GPIO lookup
363[ 9.439453] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]'
364[ 9.439483] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]' - status (0)
365[ 9.439544] gpio gpiochip3: Persistence not supported for GPIO 6
366[ 9.439819] et8ek8 3-003e: could not get clock
367[ 9.459686] tsc2005 spi0.0: GPIO lookup for consumer reset
368[ 9.459686] tsc2005 spi0.0: using device tree for GPIO lookup
369[ 9.459747] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/ocp@68000000/spi@48098000/tsc2005@0[0]' - status (0)
370[ 9.459808] gpio gpiochip3: Persistence not supported for GPIO 8
371[ 9.470306] power_supply bq27200-0: Not all required supplies found, defer probe
372[ 9.476776] bq27xxx-battery 2-0055: failed to register battery
373[ 9.484588] input: TSC2005 touchscreen as /devices/platform/68000000.ocp/48098000.spi/spi_master/spi0/spi0.0/input/input4
374[ 9.518157] hub 2-0:1.0: USB hub found
375[ 9.538635] hub 2-0:1.0: 3 ports detected
376[ 9.560852] et8ek8 3-003e: GPIO lookup for consumer reset
377[ 9.560852] et8ek8 3-003e: using device tree for GPIO lookup
378[ 9.560913] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]'
379[ 9.560974] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]' - status (0)
380[ 9.561004] gpio gpiochip3: Persistence not supported for GPIO 6
381[ 9.561309] et8ek8 3-003e: could not get clock
382[ 9.610504] power_supply bq27200-0: Not all required supplies found, defer probe
383[ 9.617340] bq27xxx-battery 2-0055: failed to register battery
384[ 9.652191] Driver for 1-wire Dallas network protocol.
385[ 9.717407] et8ek8 3-003e: GPIO lookup for consumer reset
386[ 9.717407] et8ek8 3-003e: using device tree for GPIO lookup
387[ 9.717468] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]'
388[ 9.717529] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]' - status (0)
389[ 9.717559] gpio gpiochip3: Persistence not supported for GPIO 6
390[ 9.732971] et8ek8 3-003e: could not get clock
391[ 9.753417] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode
392[ 9.796051] power_supply bq27200-0: Not all required supplies found, defer probe
393[ 9.803100] bq27xxx-battery 2-0055: failed to register battery
394[ 9.893585] et8ek8 3-003e: GPIO lookup for consumer reset
395[ 9.893646] et8ek8 3-003e: using device tree for GPIO lookup
396[ 9.893676] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]'
397[ 9.893737] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]' - status (0)
398[ 9.893768] gpio gpiochip3: Persistence not supported for GPIO 6
399[ 9.894012] et8ek8 3-003e: could not get clock
400[ 9.965911] nokia-bluetooth serial0-0: Direct firmware load for nokia/bcmfw.bin failed with error -2
401[ 9.979766] nokia-bluetooth serial0-0: hci0: Failed to load Nokia firmware file (-2)
402[ 9.986877] nokia-bluetooth serial0-0: Could not setup FW: -2
403[ 10.037902] omap_i2c 48072000.i2c: controller timed out
404[ 10.047088] power_supply bq27200-0: Not all required supplies found, defer probe
405[ 10.054504] bq27xxx-battery 2-0055: failed to register battery
406[ 10.072143] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d
407[ 10.089843] bq2415x-charger 2-006b: automode supported, waiting for events
408[ 10.129119] si4713 2-0063: chip found @ 0xc6 (OMAP I2C adapter)
409[ 10.170562] bq2415x-charger 2-006b: driver registered
410[ 10.194763] omap3isp 480bc000.isp: ignoring dependency for device, assuming no driver
411[ 10.260070] lp5523x 2-0032: lp5523 Programmable led chip found
412[ 10.269897] et8ek8 3-003e: GPIO lookup for consumer reset
413[ 10.269897] et8ek8 3-003e: using device tree for GPIO lookup
414[ 10.269958] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]'
415[ 10.270019] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]' - status (0)
416[ 10.270050] gpio gpiochip3: Persistence not supported for GPIO 6
417[ 10.270324] et8ek8 3-003e: could not get clock
418[ 10.326934] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy1 not found, using dummy regulator
419[ 10.376281] power_supply bq27200-0: bq27200-0: Found supply : bq24150a-0
420[ 10.401214] omap-sham 480c3000.sham: hw accel on OMAP rev 0.9
421[ 10.432373] cfg80211: Loading compiled-in X.509 certificates for regulatory database
422[ 10.499847] bq27xxx-battery 2-0055: battery is not calibrated! ignoring capacity values
423[ 10.514312] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy2 not found, using dummy regulator
424[ 10.537658] w1_master_driver w1_bus_master1: Family 1 for 01.000000000000.3d is not registered.
425[ 10.594940] et8ek8 3-003e: GPIO lookup for consumer reset
426[ 10.594940] et8ek8 3-003e: using device tree for GPIO lookup
427[ 10.595001] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]'
428[ 10.595062] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]' - status (0)
429[ 10.595092] gpio gpiochip3: Persistence not supported for GPIO 6
430[ 10.595672] et8ek8 3-003e: could not get clock
431[ 10.683410] et8ek8 3-003e: GPIO lookup for consumer reset
432[ 10.683441] et8ek8 3-003e: using device tree for GPIO lookup
433[ 10.683471] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]'
434[ 10.683532] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]' - status (0)
435[ 10.683563] gpio gpiochip3: Persistence not supported for GPIO 6
436[ 10.683837] et8ek8 3-003e: could not get clock
437[ 10.692840] omap3isp 480bc000.isp: Revision 2.0 found
438[ 10.783813] omap-iommu 480bd400.mmu: 480bd400.mmu: version 1.1
439[ 10.859344] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP CCP2 was not initialized!
440[ 10.915161] et8ek8 3-003e: GPIO lookup for consumer reset
441[ 10.915191] et8ek8 3-003e: using device tree for GPIO lookup
442[ 10.915222] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]'
443[ 10.915283] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/ocp@68000000/i2c@48060000/camera@3e[0]' - status (0)
444[ 10.915313] gpio gpiochip3: Persistence not supported for GPIO 6
445[ 10.951354] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP CSI2a was not initialized!
446[ 10.970031] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/camera_lens_cover[0]' - status (0)
447[ 10.970062] gpio gpiochip3: Persistence not supported for GPIO 14
448[ 10.970306] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/camera_focus[0]' - status (0)
449[ 10.970336] gpio gpiochip2: Persistence not supported for GPIO 4
450[ 10.970489] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/camera_capture[0]' - status (0)
451[ 10.970520] gpio gpiochip2: Persistence not supported for GPIO 5
452[ 10.970672] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/lock_button[0]' - status (0)
453[ 10.970672] gpio gpiochip3: Persistence not supported for GPIO 17
454[ 10.970825] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/keypad_slide[0]' - status (0)
455[ 10.970855] gpio gpiochip2: Persistence not supported for GPIO 7
456[ 10.970977] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_keys/proximity_sensor[0]' - status (0)
457[ 10.971008] gpio gpiochip2: Persistence not supported for GPIO 25
458[ 10.971435] input: gpio_keys as /devices/platform/gpio_keys/input/input5
459[ 11.033599] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/heartbeat[0]' - status (0)
460[ 11.033630] gpio gpiochip5: Persistence not supported for GPIO 2
461[ 11.033630] no flags found for gpios
462[ 11.056396] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP CCDC was not initialized!
463[ 11.064819] isp1704_charger isp1707: GPIO lookup for consumer nxp,enable
464[ 11.064819] isp1704_charger isp1707: using device tree for GPIO lookup
465[ 11.064849] of_get_named_gpiod_flags: can't parse 'nxp,enable-gpios' property of node '/isp1707[0]'
466[ 11.064910] of_get_named_gpiod_flags: parsed 'nxp,enable-gpio' property of node '/isp1707[0]' - status (0)
467[ 11.064941] gpio gpiochip2: Persistence not supported for GPIO 3
468[ 11.065460] isp1704_charger isp1707: registered with product id isp1707
469[ 11.104217] rx51-audio n900-audio: GPIO lookup for consumer tvout-selection
470[ 11.104248] rx51-audio n900-audio: using device tree for GPIO lookup
471[ 11.104309] of_get_named_gpiod_flags: parsed 'tvout-selection-gpios' property of node '/n900-audio[0]' - status (0)
472[ 11.104339] gpio gpiochip1: Persistence not supported for GPIO 8
473[ 11.104370] rx51-audio n900-audio: GPIO lookup for consumer jack-detection
474[ 11.104370] rx51-audio n900-audio: using device tree for GPIO lookup
475[ 11.104400] of_get_named_gpiod_flags: parsed 'jack-detection-gpios' property of node '/n900-audio[0]' - status (0)
476[ 11.104431] gpio gpiochip5: Persistence not supported for GPIO 17
477[ 11.104431] no flags found for jack-detection
478[ 11.104461] rx51-audio n900-audio: GPIO lookup for consumer eci-switch
479[ 11.104461] rx51-audio n900-audio: using device tree for GPIO lookup
480[ 11.104492] of_get_named_gpiod_flags: parsed 'eci-switch-gpios' property of node '/n900-audio[0]' - status (0)
481[ 11.104522] gpio gpiochip5: Persistence not supported for GPIO 22
482[ 11.104522] rx51-audio n900-audio: GPIO lookup for consumer speaker-amplifier
483[ 11.104553] rx51-audio n900-audio: using device tree for GPIO lookup
484[ 11.104583] of_get_named_gpiod_flags: parsed 'speaker-amplifier-gpios' property of node '/n900-audio[0]' - status (0)
485[ 11.107177] SGX clock rate 110 MHz
486[ 11.123229] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP preview was not initialized!
487[ 11.158874] rx51-audio n900-audio: tlv320aic3x-hifi <-> 49022000.mcbsp mapping ok
488[ 11.174224] omap3_rom_rng: initializing
489[ 11.183013] rc rc0: Unspecified device as /devices/platform/n900-ir/rc/rc0
490[ 11.196014] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP resizer was not initialized!
491[ 11.225982] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
492[ 11.243835] omap3_rom_rng: unable to get RNG clock
493[ 11.250885] rc rc0: lirc_dev: driver ir_rx51 registered at minor = 0, no receiver, raw IR transmitter
494[ 11.284423] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP AEWB was not initialized!
495[ 11.307617] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
496[ 11.322875] omap3-rom-rng: probe of omap3-rom-rng failed with error -2
497[ 11.347351] input: RX-51 AV Jack as /devices/platform/n900-audio/sound/card0/input6
498[ 11.362915] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP AF was not initialized!
499[ 11.369903] cfg80211: failed to load regulatory.db
500[ 11.421722] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP histogram was not initialized!
501[ 11.535522] et8ek8 3-003e: meta_reglist version V14 03-June-2008
502[ 11.818054] of_get_named_gpiod_flags: parsed 'ti,power-gpio' property of node '/ocp@68000000/spi@480ba000/wl1251@0[0]' - status (0)
503[ 11.820922] wl1251: WARNING MAC address in eeprom or nvs data is not valid
504[ 11.828247] wl1251: WARNING Setting random MAC address: 00:1f:df:c7:80:a0
505[ 12.150817] HSI/SSI char device loaded
506[ 12.481811] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
507[ 12.483520] wl1251: loaded
508[ 12.527191] wl1251: initialized
509[ 12.797424] mousedev: PS/2 mouse device common for all mice
510[ 12.934173] radio-si4713 radio-si4713: New device successfully probed
511[ 14.732879] random: crng init done
512[ 14.740631] random: 3 urandom warning(s) missed due to ratelimiting
513[ 14.868041] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
514[ 14.882934] wl1251: firmware booted (Rev 4.0.4.3.7)
515[ 17.092987] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
516[ 24.450500] NET: Registered protocol family 35
517[ 24.470581] SSI protocol aka McSAAB added
518[ 24.487976] nokia-modem n900-modem: GPIO lookup for consumer (null)
519[ 24.488006] nokia-modem n900-modem: using device tree for GPIO lookup
520[ 24.488067] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[0]' - status (0)
521[ 24.488098] gpio gpiochip2: Persistence not supported for GPIO 6
522[ 24.491821] nokia-modem n900-modem: GPIO lookup for consumer (null)
523[ 24.491821] nokia-modem n900-modem: using device tree for GPIO lookup
524[ 24.491912] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[1]' - status (0)
525[ 24.491943] gpio gpiochip2: Persistence not supported for GPIO 9
526[ 24.495971] nokia-modem n900-modem: GPIO lookup for consumer (null)
527[ 24.495971] nokia-modem n900-modem: using device tree for GPIO lookup
528[ 24.496063] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[2]' - status (0)
529[ 24.496093] gpio gpiochip2: Persistence not supported for GPIO 10
530[ 24.497863] nokia-modem n900-modem: GPIO lookup for consumer (null)
531[ 24.497863] nokia-modem n900-modem: using device tree for GPIO lookup
532[ 24.497955] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[3]' - status (0)
533[ 24.497955] gpio gpiochip2: Persistence not supported for GPIO 11
534[ 24.500152] nokia-modem n900-modem: GPIO lookup for consumer (null)
535[ 24.500183] nokia-modem n900-modem: using device tree for GPIO lookup
536[ 24.500244] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[4]' - status (0)
537[ 24.500274] gpio gpiochip4: Persistence not supported for GPIO 29
538[ 24.530517] nokia-modem n900-modem: GPIO lookup for consumer (null)
539[ 24.530548] nokia-modem n900-modem: using device tree for GPIO lookup
540[ 24.530578] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[0]' - status (0)
541[ 24.530609] gpio gpiochip2: Persistence not supported for GPIO 6
542[ 24.530822] nokia-modem n900-modem: GPIO lookup for consumer (null)
543[ 24.530853] nokia-modem n900-modem: using device tree for GPIO lookup
544[ 24.530883] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[1]' - status (0)
545[ 24.530914] gpio gpiochip2: Persistence not supported for GPIO 9
546[ 24.531097] nokia-modem n900-modem: GPIO lookup for consumer (null)
547[ 24.531097] nokia-modem n900-modem: using device tree for GPIO lookup
548[ 24.531158] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[2]' - status (0)
549[ 24.531158] gpio gpiochip2: Persistence not supported for GPIO 10
550[ 24.531311] nokia-modem n900-modem: GPIO lookup for consumer (null)
551[ 24.531341] nokia-modem n900-modem: using device tree for GPIO lookup
552[ 24.531433] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[3]' - status (0)
553[ 24.532867] gpio gpiochip2: Persistence not supported for GPIO 11
554[ 24.533111] nokia-modem n900-modem: GPIO lookup for consumer (null)
555[ 24.533111] nokia-modem n900-modem: using device tree for GPIO lookup
556[ 24.533172] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[4]' - status (0)
557[ 24.533203] gpio gpiochip4: Persistence not supported for GPIO 29
558[ 24.550048] CMT speech driver added
559[ 24.559082] nokia-modem n900-modem: GPIO lookup for consumer (null)
560[ 24.559112] nokia-modem n900-modem: using device tree for GPIO lookup
561[ 24.559173] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[0]' - status (0)
562[ 24.559204] gpio gpiochip2: Persistence not supported for GPIO 6
563[ 24.559387] nokia-modem n900-modem: GPIO lookup for consumer (null)
564[ 24.559417] nokia-modem n900-modem: using device tree for GPIO lookup
565[ 24.559448] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[1]' - status (0)
566[ 24.559478] gpio gpiochip2: Persistence not supported for GPIO 9
567[ 24.559631] nokia-modem n900-modem: GPIO lookup for consumer (null)
568[ 24.559631] nokia-modem n900-modem: using device tree for GPIO lookup
569[ 24.559661] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[2]' - status (0)
570[ 24.559692] gpio gpiochip2: Persistence not supported for GPIO 10
571[ 24.559844] nokia-modem n900-modem: GPIO lookup for consumer (null)
572[ 24.559844] nokia-modem n900-modem: using device tree for GPIO lookup
573[ 24.559906] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[3]' - status (0)
574[ 24.559906] gpio gpiochip2: Persistence not supported for GPIO 11
575[ 24.560058] nokia-modem n900-modem: GPIO lookup for consumer (null)
576[ 24.560058] nokia-modem n900-modem: using device tree for GPIO lookup
577[ 24.560119] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[4]' - status (0)
578[ 24.560119] gpio gpiochip4: Persistence not supported for GPIO 29
579[ 24.584106] nokia-modem n900-modem: GPIO lookup for consumer (null)
580[ 24.584106] nokia-modem n900-modem: using device tree for GPIO lookup
581[ 24.584167] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[0]' - status (0)
582[ 24.584197] gpio gpiochip2: Persistence not supported for GPIO 6
583[ 24.584411] nokia-modem n900-modem: GPIO lookup for consumer (null)
584[ 24.584411] nokia-modem n900-modem: using device tree for GPIO lookup
585[ 24.584442] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[1]' - status (0)
586[ 24.584472] gpio gpiochip2: Persistence not supported for GPIO 9
587[ 24.584625] nokia-modem n900-modem: GPIO lookup for consumer (null)
588[ 24.584625] nokia-modem n900-modem: using device tree for GPIO lookup
589[ 24.584686] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[2]' - status (0)
590[ 24.584686] gpio gpiochip2: Persistence not supported for GPIO 10
591[ 24.584838] nokia-modem n900-modem: GPIO lookup for consumer (null)
592[ 24.584869] nokia-modem n900-modem: using device tree for GPIO lookup
593[ 24.584899] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[3]' - status (0)
594[ 24.584930] gpio gpiochip2: Persistence not supported for GPIO 11
595[ 24.585052] nokia-modem n900-modem: GPIO lookup for consumer (null)
596[ 24.585083] nokia-modem n900-modem: using device tree for GPIO lookup
597[ 24.585113] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[4]' - status (0)
598[ 24.585144] gpio gpiochip4: Persistence not supported for GPIO 29
599[ 24.612060] nokia-modem n900-modem: GPIO lookup for consumer (null)
600[ 24.612060] nokia-modem n900-modem: using device tree for GPIO lookup
601[ 24.612121] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[0]' - status (0)
602[ 24.612152] gpio gpiochip2: Persistence not supported for GPIO 6
603[ 24.612365] nokia-modem n900-modem: GPIO lookup for consumer (null)
604[ 24.612365] nokia-modem n900-modem: using device tree for GPIO lookup
605[ 24.612426] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[1]' - status (0)
606[ 24.612426] gpio gpiochip2: Persistence not supported for GPIO 9
607[ 24.612609] nokia-modem n900-modem: GPIO lookup for consumer (null)
608[ 24.612609] nokia-modem n900-modem: using device tree for GPIO lookup
609[ 24.612640] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[2]' - status (0)
610[ 24.612670] gpio gpiochip2: Persistence not supported for GPIO 10
611[ 24.625518] nokia-modem n900-modem: GPIO lookup for consumer (null)
612[ 24.625549] nokia-modem n900-modem: using device tree for GPIO lookup
613[ 24.625610] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[3]' - status (0)
614[ 24.625640] gpio gpiochip2: Persistence not supported for GPIO 11
615[ 24.625823] nokia-modem n900-modem: GPIO lookup for consumer (null)
616[ 24.625854] nokia-modem n900-modem: using device tree for GPIO lookup
617[ 24.625885] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ocp@68000000/ssi-controller@48058000/ssi-port@4805a000/hsi-client[4]' - status (0)
618[ 24.625915] gpio gpiochip4: Persistence not supported for GPIO 29
619[ 24.637359] nokia-modem n900-modem: Registered Nokia HSI modem
620[ 27.638000] zram: Added device: zram0
621[ 27.663146] zram0: detected capacity change from 0 to 192970752
622[ 27.739868] Adding 188444k swap on /dev/zram0. Priority:10 extents:1 across:188444k SSFS
623[ 38.691436] using random self ethernet address
624[ 38.696624] using random host ethernet address
625[ 38.704284] udc musb-hdrc.0.auto: registering UDC driver [g1]
626[ 38.704376] configfs-gadget gadget: adding 'cdc_ethernet'/7613dcd9 to config 'The only one'/14ebd6dc
627[ 38.712677] usb0: HOST MAC 52:04:9f:70:94:93
628[ 38.722961] usb0: MAC 52:db:d9:da:a9:82
629[ 38.727050] configfs-gadget gadget: CDC Ethernet: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in
630[ 39.289184] configfs-gadget musb-hdrc.0.auto: unregistering UDC driver [g1]
631[ 39.289367] configfs-gadget gadget: unbind function 'cdc_ethernet'/7613dcd9
632[ 39.289367] configfs-gadget gadget: ecm unbind
633[ 39.307281] using random self ethernet address
634[ 39.311309] using random host ethernet address
635[ 39.335754] udc musb-hdrc.0.auto: registering UDC driver [g1]
636[ 39.335845] configfs-gadget gadget: adding 'cdc_ethernet'/19f9ac1f to config 'The only one'/6843ba56
637[ 39.341003] usb0: HOST MAC ca:89:00:60:e9:cb
638[ 39.368103] usb0: MAC 7e:f0:2a:f4:45:c9
639[ 39.372283] configfs-gadget gadget: CDC Ethernet: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in
640[ 39.416687] usb0: eth_open
641[ 51.654510] defender (2392): /proc/2391/oom_adj is deprecated, please use /proc/2391/oom_score_adj instead.
642[ 146.066467] configfs-gadget gadget: high-speed config #1: The only one
643[ 146.066497] configfs-gadget gadget: init ecm
644[ 146.066528] configfs-gadget gadget: notify connect false
645[ 146.066619] configfs-gadget gadget: notify speed 425984000
646[ 146.067382] configfs-gadget gadget: activate ecm
647[ 146.067443] usb0: qlen 10
648[ 146.067443] configfs-gadget gadget: ecm_open
649[ 146.067474] usb0: eth_start
650[ 146.067657] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
651[ 146.068725] configfs-gadget gadget: packet filter 0c
652[ 146.068725] configfs-gadget gadget: ecm req21.43 v000c i0000 l0
653[ 166.734466] configfs-gadget gadget: packet filter 0e
654[ 166.734558] configfs-gadget gadget: ecm req21.43 v000e i0000 l0
655[ 166.781372] configfs-gadget gadget: notify connect true
656[ 166.781463] configfs-gadget gadget: notify speed 425984000
657[ 1092.316772] configfs-gadget gadget: suspend
658[ 1092.316864] configfs-gadget gadget: reset config
659[ 1092.316894] configfs-gadget gadget: ecm deactivated
660[ 1092.316925] usb0: gether_disconnect
661[ 1093.398712] usb0: stop stats: rx/tx 729/704, errs 0/0
662[ 1109.199127] configfs-gadget gadget: high-speed config #1: The only one
663[ 1109.199279] configfs-gadget gadget: init ecm
664[ 1109.199310] configfs-gadget gadget: notify connect true
665[ 1109.199523] configfs-gadget gadget: notify speed 425984000
666[ 1109.200653] configfs-gadget gadget: activate ecm
667[ 1109.200775] usb0: qlen 10
668[ 1109.200805] configfs-gadget gadget: ecm_close
669[ 1109.201904] configfs-gadget gadget: packet filter 0c
670[ 1109.201965] configfs-gadget gadget: ecm req21.43 v000c i0000 l0
671[ 1109.804626] configfs-gadget musb-hdrc.0.auto: unregistering UDC driver [g1]
672[ 1109.804779] configfs-gadget gadget: reset config
673[ 1109.804779] configfs-gadget gadget: ecm deactivated
674[ 1109.804779] usb0: gether_disconnect
675[ 1109.804840] configfs-gadget gadget: unbind function 'cdc_ethernet'/19f9ac1f
676[ 1109.804870] configfs-gadget gadget: ecm unbind
677[ 1109.819519] using random self ethernet address
678[ 1109.819549] using random host ethernet address
679[ 1109.820220] udc musb-hdrc.0.auto: registering UDC driver [g1]
680[ 1109.820281] configfs-gadget gadget: adding 'cdc_ethernet'/52beb353 to config 'The only one'/ee473008
681[ 1109.834289] usb0: HOST MAC 3a:a6:a6:88:5f:d3
682[ 1109.834381] usb0: MAC 4e:2f:d7:2a:90:ca
683[ 1109.834411] configfs-gadget gadget: CDC Ethernet: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in
684[ 1109.858459] usb0: eth_open
685[ 1110.323150] configfs-gadget gadget: high-speed config #1: The only one
686[ 1110.323303] configfs-gadget gadget: init ecm
687[ 1110.323333] configfs-gadget gadget: notify connect false
688[ 1110.323547] configfs-gadget gadget: notify speed 425984000
689[ 1110.324554] configfs-gadget gadget: activate ecm
690[ 1110.324676] usb0: qlen 10
691[ 1110.324707] configfs-gadget gadget: ecm_open
692[ 1110.324768] usb0: eth_start
693[ 1110.325317] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
694[ 1110.325927] configfs-gadget gadget: packet filter 0c
695[ 1110.325988] configfs-gadget gadget: ecm req21.43 v000c i0000 l0
696[ 1146.177001] configfs-gadget gadget: packet filter 0e
697[ 1146.177062] configfs-gadget gadget: ecm req21.43 v000e i0000 l0
698[ 1146.213073] configfs-gadget gadget: notify connect true
699[ 1146.213226] configfs-gadget gadget: notify speed 425984000