· 4 years ago · Sep 01, 2021, 04:54 PM
1Current working dir /home/user/vitis-workspace/zedboard-hls-test/vector-addition_system/Emulation-SW/package
2Required emulation files like qemu_args exists
3WARNING: Image format was not specified for '/home/user/vitis-workspace/zedboard-hls-test/vector-addition_system/Emulation-SW/package/sd_card.img' and probing guessed raw.
4 Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
5 Specify the 'raw' format explicitly to remove the restrictions.
6
7qemu-system-aarch64: info: QEMU waiting for connection on: disconnected:tcp:127.0.0.1:8453,server
8
9qemu-system-aarch64: warning: nic ethernet@e000c000 has no peer
10
11
12
13U-Boot 2021.01 (Jun 01 2021 - 11:54:06 +0000)
14
15Model: Zynq Zed Development Board
16DRAM: ECC disabled 512 MiB
17Flash: 0 Bytes
18NAND: 0 MiB
19MMC: mmc@e0100000: 0
20Loading Environment from FAT... *** Warning - bad CRC, using default environment
21
22In: serial@e0001000
23Out: serial@e0001000
24Err: serial@e0001000
25Net:
26ZYNQ GEM: e000b000, mdio bus e000b000, phyaddr 0, interface rgmii-id
27Could not get PHY for eth0: addr 0
28No ethernet found.
29
30Hit any key to stop autoboot: 2 1 0
31switch to partitions #0, OK
32mmc0 is current device
33Scanning mmc 0:1...
34Found U-Boot script /boot.scr
352595 bytes read in 15 ms (168.9 KiB/s)
36## Executing script at 03000000
37Trying to load boot images from mmc0
384611728 bytes read in 384 ms (11.5 MiB/s)
39## Loading kernel from FIT Image at 10000000 ...
40 Using 'conf-system-top.dtb' configuration
41 Verifying Hash Integrity ... OK
42 Trying 'kernel-1' kernel subimage
43 Description: Linux kernel
44 Type: Kernel Image
45 Compression: uncompressed
46 Data Start: 0x100000f8
47 Data Size: 4589000 Bytes = 4.4 MiB
48 Architecture: ARM
49 OS: Linux
50 Load Address: 0x00200000
51 Entry Point: 0x00200000
52 Hash algo: sha256
53 Hash value: 219a17c8486701a0713405c927be2ecc9aa60c29effb1d4a82b879d187cc16e4
54 Verifying Hash Integrity ... sha256+ OK
55## Loading fdt from FIT Image at 10000000 ...
56 Using 'conf-system-top.dtb' configuration
57 Verifying Hash Integrity ... OK
58 Trying 'fdt-system-top.dtb' fdt subimage
59 Description: Flattened Device Tree blob
60 Type: Flat Device Tree
61 Compression: uncompressed
62 Data Start: 0x104607cc
63 Data Size: 20830 Bytes = 20.3 KiB
64 Architecture: ARM
65 Hash algo: sha256
66 Hash value: 46405c85c66bf7ceed5df5656302cc68eb166f1f5dec697d6d16ce30f31dd46d
67 Verifying Hash Integrity ... sha256+ OK
68 Booting using the fdt blob at 0x104607cc
69
70ZYNQ GEM: e000b000, mdio bus e000b000, phyaddr 0, interface rgmii-id
71Could not get PHY for eth0: addr 0
72 Loading Kernel Image
73 Loading Device Tree to 1eade000, end 1eae615d ... OK
74
75Starting kernel ...
76
77Booting Linux on physical CPU 0x0
78Linux version 5.10.0-xilinx-v2021.1 (oe-user@oe-host) (arm-xilinx-linux-gnueabi-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.1) #1 SMP PREEMPT Fri Jun 4 15:57:16 UTC 2021
79CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c5387d
80CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
81OF: fdt: Machine model: Zynq Zed Development Board
82earlycon: cdns0 at MMIO 0xe0001000 (options '115200n8')
83printk: bootconsole [cdns0] enabled
84Memory policy: Data cache writealloc
85cma: Reserved 16 MiB at 0x1f000000
86Zone ranges:
87 Normal [mem 0x0000000000000000-0x000000001fffffff]
88 HighMem empty
89Movable zone start for each node
90Early memory node ranges
91 node 0: [mem 0x0000000000000000-0x000000001fffffff]
92Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
93percpu: Embedded 15 pages/cpu s32332 r8192 d20916 u61440
94Built 1 zonelists, mobility grouping on. Total pages: 129920
95Kernel command line: console=ttyPS0,115200 earlycon root=/dev/mmcblk0p2 rw rootwait
96Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
97Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
98mem auto-init: stack:off, heap alloc:off, heap free:off
99Memory: 490460K/524288K available (7168K kernel code, 269K rwdata, 1868K rodata, 1024K init, 161K bss, 17444K reserved, 16384K cma-reserved, 0K highmem)
100rcu: Preemptible hierarchical RCU implementation.
101rcu: RCU event tracing is enabled.
102rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
103 Trampoline variant of Tasks RCU enabled.
104rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
105rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
106NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
107efuse mapped to (ptrval)
108slcr mapped to (ptrval)
109GIC physical location is 0xf8f01000
110irq-xilinx: /amba_pl/interrupt-controller@41800000: num_irq=32, sw_irq=0, edge=0x1
111L2C: platform modifies aux control register: 0x00000000 -> 0x30400000
112L2C: DT/platform modifies aux control register: 0x00000000 -> 0x30400000
113L2C-310 errata 588369 769419 enabled
114L2C-310 full line of zeros enabled for Cortex-A9
115L2C-310 cache controller enabled, 8 ways, 64 kB
116L2C-310: CACHE_ID 0x00000000, AUX_CTRL 0x00000000
117random: get_random_bytes called from start_kernel+0x2c0/0x4a0 with crng_init=0
118zynq_clock_init: clkc starts at (ptrval)
119Zynq clock init
120global-timer: non support for this cpu version.
121Failed to initialize '/axi/timer@f8f00200': -38
122Console: colour dummy device 80x30
123sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
124Calibrating delay loop... 2688.61 BogoMIPS (lpj=13443072)
125pid_max: default: 32768 minimum: 301
126Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
127Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
128CPU: Testing write buffer coherency: ok
129CPU0: Spectre v2: using BPIALL workaround
130CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
131Setting up static identity map for 0x100000 - 0x100060
132rcu: Hierarchical SRCU implementation.
133smp: Bringing up secondary CPUs ...
134CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
135CPU1: Spectre v2: using BPIALL workaround
136smp: Brought up 1 node, 2 CPUs
137SMP: Total of 2 processors activated (5351.01 BogoMIPS).
138CPU: All CPU(s) started in SVC mode.
139devtmpfs: initialized
140VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 0
141clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
142futex hash table entries: 512 (order: 3, 32768 bytes, linear)
143pinctrl core: initialized pinctrl subsystem
144NET: Registered protocol family 16
145DMA: preallocated 256 KiB pool for atomic coherent allocations
146thermal_sys: Registered thermal governor 'step_wise'
147cpuidle: using governor menu
148OF: amba_device_add() failed (-19) for /axi/etb@f8801000
149OF: amba_device_add() failed (-19) for /axi/tpiu@f8803000
150OF: amba_device_add() failed (-19) for /axi/funnel@f8804000
151OF: amba_device_add() failed (-19) for /axi/ptm@f889c000
152OF: amba_device_add() failed (-19) for /axi/ptm@f889d000
153hw-breakpoint: debug architecture 0x4 unsupported.
154zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0x(ptrval)
155e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 32, base_baud = 992063) is a xuartps
156printk: console [ttyPS0] enabled
157printk: console [ttyPS0] enabled
158printk: bootconsole [cdns0] disabled
159printk: bootconsole [cdns0] disabled
160vgaarb: loaded
161SCSI subsystem initialized
162usbcore: registered new interface driver usbfs
163usbcore: registered new interface driver hub
164usbcore: registered new device driver usb
165mc: Linux media interface: v0.10
166videodev: Linux video capture interface: v2.00
167pps_core: LinuxPPS API ver. 1 registered
168pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
169PTP clock support registered
170EDAC MC: Ver: 3.0.0
171FPGA manager framework
172Advanced Linux Sound Architecture Driver Initialized.
173NET: Registered protocol family 2
174tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
175TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
176TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
177TCP: Hash tables configured (established 4096 bind 4096)
178UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
179UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
180NET: Registered protocol family 1
181RPC: Registered named UNIX socket transport module.
182RPC: Registered udp transport module.
183RPC: Registered tcp transport module.
184RPC: Registered tcp NFSv4.1 backchannel transport module.
185PCI: CLS 0 bytes, default 64
186hw perfevents: no interrupt-affinity property for /pmu@f8891000, guessing.
187hw perfevents: enabled with armv7_cortex_a9 PMU driver, 5 counters available
188workingset: timestamp_bits=14 max_order=17 bucket_order=3
189jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
190io scheduler mq-deadline registered
191io scheduler kyber registered
192zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
193dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
194dma-pl330 f8003000.dmac: DBUFF-256x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
195brd: module loaded
196loop: module loaded
197spi-nor spi0.0: found n25q128a13, expected n25q128a11
198spi-nor spi0.0: trying to lock already unlocked area
199spi-nor spi0.0: n25q128a13 (16384 Kbytes)
2009 fixed-partitions partitions found on MTD device spi0.0
201Creating 9 MTD partitions on "spi0.0":
2020x000000000000-0x000000100000 : "qspi-fsbl-uboot"
2030x000000100000-0x000000600000 : "qspi-linux"
2040x000000600000-0x000000620000 : "qspi-device-tree"
2050x000000620000-0x000000c00000 : "qspi-rootfs"
2060x000000c00000-0x000001000000 : "qspi-bitstream"
2070x000000000000-0x000000500000 : "boot"
2080x000000500000-0x000000520000 : "bootenv"
2090x000000520000-0x000000fa0000 : "kernel"
2100x000000fa0000-0x000001000000 : "spare"
211libphy: Fixed MDIO Bus: probed
212CAN device driver interface
213libphy: MACB_mii_bus: probed
214mdio_bus e000b000.ethernet-ffffffff: MDIO device at address 0 is missing.
215macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 34 (00:0a:35:00:1e:53)
216e1000e: Intel(R) PRO/1000 Network Driver
217e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
218ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
219ehci-pci: EHCI PCI platform driver
220usbcore: registered new interface driver usb-storage
221ULPI transceiver vendor/product ID 0x0000/0x0000
222ULPI integrity check: failed!
223ci_hdrc ci_hdrc.0: unable to init phy: -19
224i2c /dev entries driver
225cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer with timeout 10s
226EDAC MC: ECC not enabled
227Xilinx Zynq CpuIdle Driver started
228sdhci: Secure Digital Host Controller Interface driver
229sdhci: Copyright(c) Pierre Ossman
230sdhci-pltfm: SDHCI platform and OF driver helper
231ledtrig-cpu: registered to indicate activity on CPUs
232clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 826992825 ns
233clocksource: Switched to clocksource ttc_clocksource
234sched_clock: 16 bits at 35kHz, resolution 28357ns, wraps every 929205421ns
235timer #0 at (ptrval), irq=48
236usbcore: registered new interface driver usbhid
237usbhid: USB HID core driver
238fpga_manager fpga0: Xilinx Zynq FPGA Manager registered
239NET: Registered protocol family 10
240Segment Routing with IPv6
241sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
242NET: Registered protocol family 17
243can: controller area network core
244NET: Registered protocol family 29
245can: raw protocol
246can: broadcast manager protocol
247can: netlink gateway - max_hops=1
248Registering SWP/SWPB emulation handler
249of-fpga-region fpga-full: FPGA Region probed
250of_cfs_init
251of_cfs_init: OK
252ALSA device list:
253 No soundcards found.
254mmc0: SDHCI controller on e0100000.mmc [e0100000.mmc] using ADMA 64-bit
255Waiting for root device /dev/mmcblk0p2...
256mmc0: Problem switching card into high-speed mode!
257mmc0: new SD card at address 4567
258mmcblk0: mmc0:4567 QEMU! 2.00 GiB
259 mmcblk0: p1 p2
260List of all partitions:
2610100 16384 ram0
262 (driver?)
2630101 16384 ram1
264 (driver?)
2650102 16384 ram2
266 (driver?)
2670103 16384 ram3
268 (driver?)
2690104 16384 ram4
270 (driver?)
2710105 16384 ram5
272 (driver?)
2730106 16384 ram6
274 (driver?)
2750107 16384 ram7
276 (driver?)
2770108 16384 ram8
278 (driver?)
2790109 16384 ram9
280 (driver?)
281010a 16384 ram10
282 (driver?)
283010b 16384 ram11
284 (driver?)
285010c 16384 ram12
286 (driver?)
287010d 16384 ram13
288 (driver?)
289010e 16384 ram14
290 (driver?)
291010f 16384 ram15
292 (driver?)
2931f00 1024 mtdblock0
294 (driver?)
2951f01 5120 mtdblock1
296 (driver?)
2971f02 128 mtdblock2
298 (driver?)
2991f03 6016 mtdblock3
300 (driver?)
3011f04 4096 mtdblock4
302 (driver?)
3031f05 5120 mtdblock5
304 (driver?)
3051f06 128 mtdblock6
306 (driver?)
3071f07 10752 mtdblock7
308 (driver?)
3091f08 384 mtdblock8
310 (driver?)
311b300 2097152 mmcblk0
312 driver: mmcblk
313 b301 999424 mmcblk0p1 033da8cc-01
314
315 b302 572416 mmcblk0p2 033da8cc-02
316
317No filesystem could mount root, tried:
318 ext3
319 ext2
320 ext4
321 vfat
322 msdos
323
324Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)
325CPU0: stopping
326CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-xilinx-v2021.1 #1
327Hardware name: Xilinx Zynq Platform
328[<c010cbc0>] (unwind_backtrace) from [<c0108cc0>] (show_stack+0x10/0x14)
329[<c0108cc0>] (show_stack) from [<c0712574>] (dump_stack+0xb4/0xd0)
330[<c0712574>] (dump_stack) from [<c010b0c4>] (do_handle_IPI+0x80/0x140)
331[<c010b0c4>] (do_handle_IPI) from [<c010b198>] (ipi_handler+0x14/0x20)
332[<c010b198>] (ipi_handler) from [<c015d658>] (handle_percpu_devid_irq+0x4c/0xf4)
333[<c015d658>] (handle_percpu_devid_irq) from [<c01588fc>] (generic_handle_irq+0x28/0x38)
334[<c01588fc>] (generic_handle_irq) from [<c0158ea8>] (__handle_domain_irq+0x90/0xa0)
335[<c0158ea8>] (__handle_domain_irq) from [<c037d9a8>] (gic_handle_irq+0x6c/0x7c)
336[<c037d9a8>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0xa8)
337Exception stack(0xc0c01ee0 to 0xc0c01f28)
3381ee0: 00000000 00000000 1e00c000 deb4d2c0 deb4c638 2705bad4 00000000 00000000
3391f00: c0c3a700 00000000 27054c0f 00000000 00000011 c0c01f30 c058776c c0587790
3401f20: 60000013 ffffffff
341[<c0100b0c>] (__irq_svc) from [<c0587790>] (cpuidle_enter_state+0x110/0x284)
342[<c0587790>] (cpuidle_enter_state) from [<c0587940>] (cpuidle_enter+0x28/0x38)
343[<c0587940>] (cpuidle_enter) from [<c013f530>] (do_idle+0x240/0x264)
344[<c013f530>] (do_idle) from [<c013f6bc>] (cpu_startup_entry+0x18/0x1c)
345[<c013f6bc>] (cpu_startup_entry) from [<c0b00d04>] (start_kernel+0x3f8/0x4a0)
346[<c0b00d04>] (start_kernel) from [<00000000>] (0x0)
347---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2) ]---
348INFO: [LAUNCH_EMULATOR] Killing process in file /home/user/vitis-workspace/zedboard-hls-test/vector-addition_system/Emulation-SW/emulation.pid
349qemu-system-aarch64: terminating on signal 15 from pid 872201 ()
350
351Successfully killed launch_emulator process