· 8 years ago · Feb 23, 2018, 06:30 PM
1<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ff000000, size 16 MiB
2<6>[ 0.000000] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool
3<6>[ 0.000000] Reserved memory: allocated memory for 'adsp_region@0' node: base 0x00000000fec00000, size 4 MiB
4<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fec00000, size 4 MiB
5<6>[ 0.000000] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool
6<6>[ 0.000000] Removed memory: created DMA memory pool at 0x00000000aff00000, size 1 MiB
7<6>[ 0.000000] Reserved memory: initialized node ramoops_region@AFF00000, compatible id removed-dma-pool
8<6>[ 0.000000] cma: Reserved 16 MiB at 0x00000000fdc00000
9<7>[ 0.000000] On node 0 totalpages: 513024
10<7>[ 0.000000] DMA zone: 8192 pages used for memmap
11<7>[ 0.000000] DMA zone: 0 pages reserved
12<7>[ 0.000000] DMA zone: 513024 pages, LIFO batch:31
13<6>[ 0.000000] psci: probing for conduit method from DT.
14<6>[ 0.000000] psci: PSCIv1.0 detected in firmware.
15<6>[ 0.000000] psci: Using standard PSCI v0.2 function IDs
16<6>[ 0.000000] psci: Initializing psci_cpu_init
17<6>[ 0.000000] psci: Initializing psci_cpu_init
18<6>[ 0.000000] psci: Initializing psci_cpu_init
19<6>[ 0.000000] psci: Initializing psci_cpu_init
20<6>[ 0.000000] psci: Initializing psci_cpu_init
21<6>[ 0.000000] psci: Initializing psci_cpu_init
22<6>[ 0.000000] psci: Initializing psci_cpu_init
23<6>[ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc07da0c000 s21632 r8192 d31616 u61440
24<7>[ 0.000000] pcpu-alloc: s21632 r8192 d31616 u61440 alloc=15*4096
25<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
26<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504832
27<5>[ 0.000000] Kernel command line: sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 user_debug=30 msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 androidboot.hardware=ph2n androidboot.selinux=permissive lge.uart=disable lge.rev=rev_10 model.name=LGMS550 lge.bootreason=recovery kswitch lge.bootreasoncode=0x77665502 bootcable.type=NO_INIT lge.battid=SW3800_VC1 lge.bootWithLcd=connect gpt androidboot.ddr_size=2147483648 androidboot.ddr_info=0x0 boot_cpus=0-7 lge.panel_type=lgd_incell_db7400_hd_video lge.crash_handler=off lge.hreset=off androidboot.bl_unlock_complete=true androidboot.dlcomplete=0 androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.rpmb_state=1 androidboot.recovery=true emmc-vdd-always-on=1 androidboot.emmc=true androidboot.serialno=LGMS55054ba16c0 gpt lge.signed_image=true androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_lgd_incell_db7400_hd_video:1:none:cf<6>[ 0.000000] BOARD: LGE rev_10
28<6>[ 0.000000] LGE BOOT REASON: 0x77665502
29<6>[ 0.000000] lge_set_panel_type: panel type = 3
30<6>[ 0.000000] [Touch] LGE RECOVERY BOOT: 1
31<6>[ 0.000000] vdd_always_on=1
32<6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
33<6>[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
34<6>[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
35<4>[ 0.000000] Memory: 1386280K/2052096K available (14292K kernel code, 1980K rwdata, 8088K rodata, 492K init, 3396K bss, 665816K reserved)
36<5>[ 0.000000] Virtual kernel memory layout:
37<5>[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
38<5>[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
39<5>[ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc2000000 ( 32 MB actual)
40<5>[ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
41<5>[ 0.000000] fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
42<5>[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
43<5>[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
44<5>[ 0.000000] .init : 0xffffffc00165e000 - 0xffffffc0016d9000 ( 492 KB)
45<5>[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc00165d204 ( 22389 KB)
46<5>[ 0.000000] .data : 0xffffffc0016f5000 - 0xffffffc0018e4200 ( 1981 KB)
47<6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
48<6>[ 0.000000] HMP scheduling enabled.
49<6>[ 0.000000] Preemptible hierarchical RCU implementation.
50<6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
51<6>[ 0.000000] NR_IRQS:64 nr_irqs:64 0
52<4>[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
53<3>[ 0.000000] MPM 1 irq mapping errored -517
54<6>[ 0.000000] Offload RCU callbacks from all CPUs
55<6>[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
56<6>[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
57<6>[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
58<6>[ 0.000019] Switched to clocksource arch_sys_counter
59<6>[ 0.000650] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
60<6>[ 0.000663] pid_max: default: 32768 minimum: 301
61<6>[ 0.000743] Security Framework initialized
62<6>[ 0.000759] SELinux: Initializing.
63<7>[ 0.000800] SELinux: Starting in permissive mode
64<6>[ 0.000862] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
65<6>[ 0.000873] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
66<6>[ 0.001612] Initializing cgroup subsys freezer
67<3>[ 0.002229] /cpus/cpu@100: Missing clock-frequency property
68<3>[ 0.002247] /cpus/cpu@101: Missing clock-frequency property
69<3>[ 0.002266] /cpus/cpu@102: Missing clock-frequency property
70<3>[ 0.002286] /cpus/cpu@103: Missing clock-frequency property
71<3>[ 0.002308] /cpus/cpu@0: Missing clock-frequency property
72<3>[ 0.002331] /cpus/cpu@1: Missing clock-frequency property
73<3>[ 0.002357] /cpus/cpu@2: Missing clock-frequency property
74<3>[ 0.002385] /cpus/cpu@3: Missing clock-frequency property
75<6>[ 0.002432] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
76<6>[ 0.002473] EFI services will not be available.
77<4>[ 0.013120]
78<4>[ 0.013120] **********************************************************
79<4>[ 0.013131] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
80<4>[ 0.013138] ** **
81<4>[ 0.013144] ** trace_printk() being used. Allocating extra memory. **
82<4>[ 0.013151] ** **
83<4>[ 0.013157] ** This means that this is a DEBUG kernel and it is **
84<4>[ 0.013164] ** unsafe for produciton use. **
85<4>[ 0.013170] ** **
86<4>[ 0.013176] ** If you see this message and you are not debugging **
87<4>[ 0.013183] ** the kernel, report this immediately to your vendor! **
88<4>[ 0.013189] ** **
89<4>[ 0.013195] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
90<4>[ 0.013201] **********************************************************
91<6>[ 0.015485] MSM Memory Dump base table set up
92<6>[ 0.015508] MSM Memory Dump apps data table set up
93<6>[ 0.015569] Configuring XPU violations to be fatal errors
94<6>[ 0.017216] cpu_clock_a53_init_little: A53 Power clocks configured
95<6>[ 0.041329] Brought up 8 CPUs
96<6>[ 0.041343] SMP: Total of 8 processors activated.
97<6>[ 0.041433] alternatives: patching kernel code
98<6>[ 0.046576] DMI not present or invalid.
99<6>[ 0.051224] pinctrl core: initialized pinctrl subsystem
100<6>[ 0.051785] regulator-dummy: no parameters
101<6>[ 0.117246] NET: Registered protocol family 16
102<4>[ 0.121368] msm_pm_tz_boot_init: set warmboot address failed
103<3>[ 0.121434] scm_call failed: func id 0x42000101, ret: -1, syscall returns: 0x0, 0x0, 0x0
104<6>[ 0.140098] cpuidle: using governor ladder
105<6>[ 0.160092] cpuidle: using governor menu
106<6>[ 0.180090] cpuidle: using governor qcom
107<6>[ 0.182135] vdso: 2 pages (1 code @ ffffffc0016fd000, 1 data @ ffffffc0016fc000)
108<6>[ 0.183225] software IO TLB [mem 0xf9c00000-0xfa000000] (4MB) mapped at [ffffffc079c00000-ffffffc079ffffff]
109<6>[ 0.184377] DMA: preallocated 256 KiB pool for atomic allocations
110<4>[ 0.192437] __of_mpm_init(): MPM driver mapping exists
111<3>[ 0.219525] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
112<6>[ 0.224071] sps:sps is ready.
113<6>[ 0.225873] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
114<6>[ 0.225989] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
115<3>[ 0.225999] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
116<6>[ 0.226011] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
117<3>[ 0.226022] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
118<6>[ 0.228087] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
119<3>[ 0.228237] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
120<3>[ 0.228251] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
121<6>[ 0.228887] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
122<3>[ 0.229030] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
123<3>[ 0.229043] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
124<6>[ 0.229687] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
125<3>[ 0.229829] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
126<3>[ 0.229841] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
127<6>[ 0.231601] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
128<6>[ 0.231614] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
129<3>[ 0.235129] smd_channel_probe_now: allocation table not initialized
130<3>[ 0.236420] smd_channel_probe_now: allocation table not initialized
131<3>[ 0.237470] smd_channel_probe_now: allocation table not initialized
132<4>[ 0.238881] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
133<6>[ 0.238892] msm_rpm_dev_probe: APSS-RPM communication over SMD
134<6>[ 0.239641] pm8937_s1: 1000 <--> 1225 mV at 1000 mV normal idle
135<6>[ 0.240549] pm8937_s2_level: 0 <--> 0 mV at 0 mV normal idle
136<6>[ 0.241154] pm8937_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle
137<6>[ 0.241773] pm8937_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle
138<6>[ 0.242581] pm8937_s3: 1300 mV normal idle
139<6>[ 0.243419] pm8937_s4: 2050 mV normal idle
140<6>[ 0.244231] pm8937_l2: 1200 mV normal idle
141<6>[ 0.245080] pm8937_l3_level_ao: 0 <--> 0 mV at 0 mV normal idle
142<6>[ 0.245686] pm8937_l3_level_so: 0 <--> 0 mV at 0 mV normal idle
143<6>[ 0.246513] pm8937_l5: 1800 mV normal idle
144<6>[ 0.247328] pm8937_l6: 1800 mV normal idle
145<6>[ 0.248172] pm8937_l7: 1800 mV normal idle
146<6>[ 0.248770] pm8937_l7_ao: 1800 mV normal idle
147<6>[ 0.249612] pm8937_l8: 2850 <--> 2900 mV at 2900 mV normal idle
148<6>[ 0.250446] pm8937_l9: 3000 <--> 3300 mV at 3000 mV normal idle
149<6>[ 0.251282] pm8937_l10: 2800 <--> 3000 mV at 2800 mV normal idle
150<6>[ 0.252093] pm8937_l11: 2950 mV normal idle
151<6>[ 0.252943] pm8937_l12: 1800 <--> 2950 mV at 1800 mV normal idle
152<6>[ 0.253760] pm8937_l13: 3075 mV normal idle
153<6>[ 0.254606] pm8937_l14: 1800 <--> 3300 mV at 1800 mV normal idle
154<6>[ 0.255428] pm8937_l15: 1800 <--> 3300 mV at 1800 mV normal idle
155<6>[ 0.256264] pm8937_l16: 1800 mV normal idle
156<6>[ 0.257073] pm8937_l17: 2850 mV normal idle
157<6>[ 0.257908] pm8937_l19: 1225 <--> 1350 mV at 1225 mV normal idle
158<6>[ 0.258730] pm8937_l22: 2800 mV normal idle
159<6>[ 0.259571] pm8937_l23: 1200 mV normal idle
160<6>[ 0.262020] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
161<6>[ 0.262418] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
162<6>[ 0.268501] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0
163<3>[ 0.272162] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
164<6>[ 0.273672] pm8937_s5: 1050 <--> 1350 mV at 1225 mV normal idle
165<6>[ 0.273927] spm_regulator_probe: name=pm8937_s5, range=LV, voltage=1225000 uV, mode=AUTO, step rate=1200 uV/us
166<6>[ 0.282947] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
167<6>[ 0.283663] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
168<6>[ 0.284172] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
169<6>[ 0.284500] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
170<6>[ 0.285829] mem_acc_corner: 0 <--> 0 mV at 0 mV
171<6>[ 0.286635] cpr_efuse_init: apc_corner: efuse_addr = 0x00000000000a4000 (len=0x1000)
172<6>[ 0.286674] cpr_read_fuse_revision: apc_corner: fuse revision = 2
173<6>[ 0.286691] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x3048e821003d15bb, speed_bits = 0
174<6>[ 0.286793] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[1]: 1085000 -> 1120000 uV
175<6>[ 0.286807] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1135000 -> 1175000 uV
176<6>[ 0.286821] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[3]: 1220000 -> 1240000 uV
177<6>[ 0.286837] cpr_pvs_init: apc_corner: pvs voltage: [1120000 1175000 1240000] uV
178<6>[ 0.286848] cpr_pvs_init: apc_corner: ceiling voltage: [1155000 1225000 1350000] uV
179<6>[ 0.286859] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1090000] uV
180<6>[ 0.287087] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 4
181<6>[ 0.287114] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
182<6>[ 0.287146] cpr_init_cpr_efuse: apc_corner: [row:67] = 0x248dea73d5a51bad
183<6>[ 0.287171] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 890
184<6>[ 0.287183] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 981
185<6>[ 0.287196] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1134
186<6>[ 0.287223] cpr_adjust_target_quots: apc_corner: Corner[1]: adjusted target quot = 940
187<6>[ 0.287236] cpr_adjust_target_quots: apc_corner: Corner[2]: adjusted target quot = 991
188<6>[ 0.287248] cpr_adjust_target_quots: apc_corner: Corner[3]: adjusted target quot = 1154
189<6>[ 0.287344] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.380
190<6>[ 0.287354] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.530
191<6>[ 0.287369] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 940
192<6>[ 0.287378] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 991
193<6>[ 0.287386] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 1053
194<6>[ 0.287395] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 1073
195<6>[ 0.287403] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 1124
196<6>[ 0.287412] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1154
197<6>[ 0.287420] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1154
198<6>[ 0.287594] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
199<6>[ 0.287987] apc_corner: 0 <--> 0 mV
200<3>[ 0.306613] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
201<6>[ 0.307459] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
202<3>[ 0.307949] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
203<3>[ 0.307960] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
204<3>[ 0.307972] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
205<3>[ 0.307981] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
206<6>[ 0.307989] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
207<6>[ 0.309756] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
208<3>[ 0.309912] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
209<3>[ 0.309926] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
210<6>[ 0.310278] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
211<3>[ 0.310422] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
212<3>[ 0.310435] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
213<6>[ 0.310760] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
214<3>[ 0.310902] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
215<3>[ 0.310914] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
216<6>[ 0.311935] qcom,gcc-8952 1800000.qcom,gcc: GPU speed bin: 0
217<3>[ 0.312420] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
218<3>[ 0.312431] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
219<3>[ 0.312442] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
220<3>[ 0.312451] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
221<3>[ 0.312463] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
222<3>[ 0.312471] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
223<3>[ 0.312482] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
224<3>[ 0.312491] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
225<6>[ 0.339263] qcom,gcc-spm-8952 b111200.qcom,spm: Registered GCC SPM clocks
226<6>[ 0.339291] qcom,gcc-8952 1800000.qcom,gcc: Registered GCC clocks
227<6>[ 0.339441] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
228<6>[ 0.339454] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
229<6>[ 0.343038] populate_opp_table: clock-cpu-8939: OPP tables populated (cpu 7 and 3)
230<6>[ 0.343049] print_opp_table: clock_cpu: a53_c0: OPP voltage for 768000000: 1120000
231<6>[ 0.343058] print_opp_table: clock_cpu: a53_c0: OPP voltage for 1094400000: 1240000
232<6>[ 0.343067] print_opp_table: clock_cpu: a53_c1: OPP voltage for 960000000: 1120000
233<6>[ 0.343075] print_opp_table: clock_cpu: a53_c1: OPP voltage for 1401000000: 1240000
234<6>[ 0.343968] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
235<3>[ 0.344176] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
236<6>[ 0.344188] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
237<6>[ 0.345890] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
238<3>[ 0.346092] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
239<6>[ 0.346104] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
240<6>[ 0.347197] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
241<3>[ 0.347397] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
242<6>[ 0.347409] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
243<3>[ 0.432384] qcom,qpnp-pin qpnp-pin-15: qpnp_pin_probe: no device nodes specified in topology
244<4>[ 0.432408] qcom,qpnp-pin: probe of qpnp-pin-15 failed with error -22
245<3>[ 0.433430] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
246<3>[ 0.433448] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
247<6>[ 0.437099] KPI: Bootloader start count = 28479
248<6>[ 0.437109] KPI: Bootloader end count = 83214
249<6>[ 0.437116] KPI: Bootloader display count = 44768
250<6>[ 0.437123] KPI: Bootloader load kernel count = 1873
251<6>[ 0.437131] KPI: Kernel MPM timestamp = 103831
252<6>[ 0.437138] KPI: Kernel MPM Clock frequency = 32768
253<6>[ 0.437164] socinfo_print: v0.10, id=294, ver=1.0, raw_id=79, raw_ver=0, hw_plat=96, hw_plat_ver=7
254<6>[ 0.437164] accessory_chip=0, hw_plat_subtype=0, pmic_model=65561, pmic_die_revision=65536 foundry_id=1 serial_number=4003259
255<6>[ 0.438383] adv_vreg: no parameters
256<6>[ 0.438982] vgaarb: loaded
257<5>[ 0.440109] SCSI subsystem initialized
258<6>[ 0.441048] usbcore: registered new interface driver usbfs
259<6>[ 0.441132] usbcore: registered new interface driver hub
260<6>[ 0.441378] usbcore: registered new device driver usb
261<6>[ 0.442126] media: Linux media interface: v0.10
262<6>[ 0.442199] Linux video capture interface: v2.00
263<6>[ 0.442294] EDAC MC: Ver: 3.0.0
264<6>[ 0.446191] cpufreq: driver msm up and running
265<6>[ 0.446718] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
266<6>[ 0.447011] ION heap system created
267<6>[ 0.447189] ION heap qsecom created at 0x00000000ff000000 with size 1000000
268<3>[ 0.447531] msm_bus_fabric_init_driver
269<4>[ 0.448542] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048
270<6>[ 0.461003] qcom,qpnp-power-on qpnp-power-on-4: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
271<6>[ 0.461024] qcom,qpnp-power-on qpnp-power-on-4: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
272<6>[ 0.461220] input: qpnp_pon as /devices/virtual/input/input0
273<6>[ 0.461655] pon_spare_reg: no parameters
274<6>[ 0.461784] qcom,qpnp-power-on qpnp-power-on-13: No PON config. specified
275<6>[ 0.461836] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
276<6>[ 0.461853] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
277<6>[ 0.462058] PMIC@SID0: PM8937 v1.0 options: 0, 2, 0, 0
278<6>[ 0.462166] PMIC@SID2: PMI8950 v2.0 options: 0, 0, 0, 0
279<6>[ 0.463431] gdsc_venus: no parameters
280<6>[ 0.463763] gdsc_mdss: no parameters
281<6>[ 0.464107] gdsc_jpeg: no parameters
282<6>[ 0.464625] gdsc_vfe: no parameters
283<6>[ 0.465174] gdsc_vfe1: no parameters
284<6>[ 0.465489] gdsc_cpp: no parameters
285<6>[ 0.465773] gdsc_oxili_gx: no parameters
286<6>[ 0.466040] gdsc_venus_core0: fast normal
287<6>[ 0.466325] gdsc_oxili_cx: no parameters
288<6>[ 0.467440] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
289<6>[ 0.467448] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
290<6>[ 0.468277] dsi_pll_clock_register_lpm: Registered DSI PLL:0 clocks successfully
291<6>[ 0.468310] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
292<6>[ 0.468318] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
293<6>[ 0.470201] dsi_pll_clock_register_lpm: Registered DSI PLL:1 clocks successfully
294<6>[ 0.470542] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001b80000, with 21 ctx banks
295<6>[ 0.478047] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context q6 using bank 0
296<6>[ 0.478250] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1
297<6>[ 0.478456] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2
298<6>[ 0.478665] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3
299<6>[ 0.478869] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
300<6>[ 0.479071] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5
301<6>[ 0.479274] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6
302<6>[ 0.479512] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8
303<6>[ 0.479756] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context mss_nav using bank 9
304<6>[ 0.479989] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10
305<6>[ 0.480250] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11
306<6>[ 0.480494] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15
307<6>[ 0.480728] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16
308<6>[ 0.480970] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17
309<6>[ 0.481204] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18
310<6>[ 0.481444] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19
311<6>[ 0.481680] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20
312<6>[ 0.481913] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21
313<6>[ 0.482149] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22
314<6>[ 0.482389] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context mss_mcdma using bank 24
315<6>[ 0.482627] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23
316<3>[ 0.485074] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
317<3>[ 0.485102] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
318<3>[ 0.485125] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
319<6>[ 0.487594] Advanced Linux Sound Architecture Driver Initialized.
320<6>[ 0.488591] Bluetooth: ffffffc00d277d18
321<6>[ 0.488621] NET: Registered protocol family 31
322<6>[ 0.488626] Bluetooth: ffffffc00d277d18
323<6>[ 0.488636] Bluetooth: ffffffc00d277cf8Bluetooth: ffffffc00d277cc8
324<6>[ 0.488675] Bluetooth: ffffffc00d277cd8<6>[ 0.489003] cfg80211: Calling CRDA to update world regulatory domain
325<6>[ 0.489024] cfg80211: World regulatory domain updated:
326<6>[ 0.489029] cfg80211: DFS Master region: unset
327<6>[ 0.489033] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
328<6>[ 0.489040] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
329<6>[ 0.489046] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
330<6>[ 0.489052] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
331<6>[ 0.489058] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
332<6>[ 0.489064] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
333<6>[ 0.489070] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
334<6>[ 0.489075] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
335<6>[ 0.489081] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
336<1>[ 0.489329] pcie:pcie_init.
337<6>[ 0.491468] ibb_reg: 4600 <--> 6000 mV at 5500 mV
338<6>[ 0.491942] lab_reg: 4600 <--> 6000 mV at 5500 mV
339<6>[ 0.493218] Switched to clocksource arch_sys_counter
340<6>[ 0.540809] bcl_peripheral:bcl_perph_init BCL Initialized
341<6>[ 0.543070] NET: Registered protocol family 2
342<6>[ 0.543582] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
343<6>[ 0.543699] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
344<6>[ 0.543923] TCP: Hash tables configured (established 16384 bind 16384)
345<6>[ 0.543976] TCP: reno registered
346<6>[ 0.543987] UDP hash table entries: 1024 (order: 3, 32768 bytes)
347<6>[ 0.544025] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
348<6>[ 0.544218] NET: Registered protocol family 1
349<7>[ 0.544253] PCI: CLS 0 bytes, default 64
350<6>[ 0.546201] gcc-mdss-8952 soc:qcom,gcc-mdss@1800000: Registered GCC MDSS clocks.
351<6>[ 0.547547] Trying to unpack rootfs image as initramfs...
352<6>[ 0.787533] Freeing initrd memory: 6392K (ffffffc003c00000 - ffffffc00423e000)
353<6>[ 0.793859] futex hash table entries: 2048 (order: 5, 131072 bytes)
354<6>[ 0.793985] audit: initializing netlink subsys (disabled)
355<5>[ 0.794038] audit: type=2000 audit(0.789:1): initialized
356<4>[ 0.794523] vmscan: error setting kswapd cpu affinity mask
357<6>[ 0.799056] zbud: loaded
358<5>[ 0.799444] VFS: Disk quotas dquot_6.5.2
359<4>[ 0.799568] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
360<6>[ 0.801040] Registering sdcardfs 0.1
361<6>[ 0.801203] fuse init (API version 7.23)
362<7>[ 0.801464] SELinux: Registering netfilter hooks
363<6>[ 0.804417] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
364<6>[ 0.804429] io scheduler noop registered
365<6>[ 0.804438] io scheduler deadline registered
366<6>[ 0.804623] io scheduler cfq registered (default)
367<3>[ 0.810541] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x1 (ok)
368<3>[ 0.810688] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x0d1300c8 OPER:0x00000010
369<3>[ 0.810723] msm_dba_helper_i2c_read: i2c read failed
370<3>[ 0.810730] adv7533_read: read err: addr 0x39, reg 0x0, size 0x1
371<3>[ 0.810734] adv7533_probe: Failed to read chip rev
372<4>[ 0.810809] adv7533: probe of 2-0039 failed with error -5
373<3>[ 0.811243] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
374<3>[ 0.811253] mdss_mdp_probe+0x220/0x10d4->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
375<3>[ 0.811758] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
376<3>[ 0.812462] No change in context(0==0), skip
377<6>[ 0.812960] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
378<6>[ 0.812981] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
379<6>[ 0.812987] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
380<6>[ 0.813004] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
381<6>[ 0.813021] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
382<3>[ 0.813033] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
383<3>[ 0.813136] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
384<6>[ 0.813479] xlog_status: enable:1, panic:1, dump:3
385<6>[ 0.814325] mdss_mdp_probe: mdss version = 0x100e0000, bootloader display is on, num 1, intf_sel=0x00000100
386<3>[ 0.816517] mdss_smmu_util_parse_dt_clock: clocks are not defined
387<6>[ 0.816580] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
388<3>[ 0.816610] mdss_smmu_util_parse_dt_clock: clocks are not defined
389<6>[ 0.816654] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
390<6>[ 0.818964] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
391<6>[ 0.819488] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_lgd_incell_db7400_hd_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_lgd_incell_db7400_hd_video
392<6>[ 0.819564] mdss_dsi_panel_init: Panel Name = LGD DONGBU HITEK INCELL HD video mode dsi panel
393<6>[ 0.819740] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_lgd_incell_db7400_hd_video" (ffffffc00d277308)
394<3>[ 0.819763] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
395<3>[ 0.819771] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
396<4>[ 0.819777] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
397<6>[ 0.819896] mdss_dsi_parse_panel_features: ulps feature disabled
398<6>[ 0.819903] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
399<6>[ 0.819911] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
400<6>[ 0.820011] lge_mdss_panel_parse_dt_extra: esc-clk-rate not specified
401<6>[ 0.820047] lge_mdss_panel_parse_dt_extra: failed to parse panel_id
402<6>[ 0.820054] parse_dt_extra_dcs_cmds: num_extra_cmds=1
403<6>[ 0.820145] lge_set_display_power_ctrl: display_power_ctrl [0]
404<6>[ 0.820149] lge_init_mfts: mfts_mode : 0
405<3>[ 0.820301] no supply entry present: lge,extra-supply-entries
406<3>[ 0.820323] mdss_dsi_parse_ctrl_params:4055 Unable to read qcom,display-id, data=0000000000000000,len=45
407<3>[ 0.820331] mdss_dsi_parse_gpio_params:4090, TE gpio not specified
408<6>[ 0.820336] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
409<6>[ 0.820348] lge_mdss_dsi_parse_gpio_params: num_gpios=4
410<6>[ 0.820403] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=ffffff8000d94b80 phy_regulator_size=30
411<6>[ 0.820409] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8000d90000 ctrl_size=300 phy_base=ffffff8000d92400 phy_size=280
412<6>[ 0.820527] dsi_panel_device_register: Continuous splash enabled
413<6>[ 0.820869] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
414<6>[ 0.821377] mdss_dsi_panel_reset: + enable = 1 (override: ph2n_tmo_us)
415<6>[ 0.821382] mdss_dsi_panel_reset: -
416<6>[ 0.842044] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x1
417<6>[ 0.842318] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
418<3>[ 0.842328] mdss_dsi_pinctrl_init: failed to get pinctrl
419<4>[ 0.842333] mdss_dsi_ctrl_probe: failed to get pin resources
420<6>[ 0.842767] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_lgd_incell_db7400_hd_video:1:none:cfg:single_dsi panel_name:none
421<3>[ 0.842772] mdss_dsi_config_panel: can't find panel node 0:qcom,mdss_dsi_lgd_incell_db7400_hd_video:1:none:cfg:single_dsi
422<3>[ 0.842777] mdss_dsi_ctrl_probe: panel configuration failed
423<4>[ 0.842792] mdss_dsi_ctrl: probe of 1a96000.qcom,mdss_dsi_ctrl1 failed with error -22
424<6>[ 0.842892] mdss_dsi_status_init: DSI status check interval:1700
425<6>[ 0.843654] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
426<6>[ 0.844332] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
427<6>[ 0.845156] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
428<6>[ 0.845710] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
429<6>[ 0.845823] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
430<3>[ 0.845937] mdss_mdp_splash_parse_dt: splash mem child node is not present
431<3>[ 0.849227] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
432<3>[ 0.849259] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
433<6>[ 0.854304] In memshare_probe, Memshare probe success
434<5>[ 0.856530] msm_rpm_log_probe: OK
435<6>[ 0.860098] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
436<6>[ 0.862847] bootlog_probe: start 0x1334
437<6>[ 0.862853] bootlog_probe: size 0x1fff4
438<6>[ 0.862857] -------------------------------------------------
439<6>[ 0.862861] below logs are got from bootloader
440<6>[ 0.862864] -------------------------------------------------
441<6>[ 0.862867]
442<6>[ 0.862872]
443<6>[ 0.862891] Format: Log Type - Time(microsec) - Message - Optional Info
444<6>[ 0.862913] Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
445<6>[ 0.862928] B - 228445 - Earjack Debugger Detected
446<6>[ 0.862943] S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3-00155
447<6>[ 0.862957] S - IMAGE_VARIANT_STRING=FAASANAZA
448<6>[ 0.862970] S - OEM_IMAGE_VERSION_STRING=LGE
449<6>[ 0.862981] S - Boot Config, 0x000000e1
450<6>[ 0.862992] B - 246 - PBL, Start
451<6>[ 0.863009] B - 2949 - bootable_media_detect_entry, Start
452<6>[ 0.863027] B - 51893 - bootable_media_detect_success, Start
453<6>[ 0.863041] B - 51899 - elf_loader_entry, Start
454<6>[ 0.863056] B - 53548 - auth_hash_seg_entry, Start
455<6>[ 0.863071] B - 90653 - auth_hash_seg_exit, Start
456<6>[ 0.863088] B - 120831 - elf_segs_hash_verify_entry, Start
457<6>[ 0.863099] B - 217614 - PBL, End
458<6>[ 0.863110] B - 227743 - SBL1, Start
459<6>[ 0.863124] B - 281545 - pm_device_init, Start
460<6>[ 0.863143] B - 284656 - PON REASON:PM0:0x200020021 PM1:0x200020020
461<6>[ 0.863157] B - 309758 - boot_flash_init, Start
462<6>[ 0.863174] B - 309788 - boot_config_data_table_init, Start
463<6>[ 0.863198] B - 311374 - CDT version:3,Platform ID:96,Major ID:1,Minor ID:0,Subtype:0
464<6>[ 0.863213] B - 318328 - sbl1_ddr_set_params, Start
465<6>[ 0.863226] B - 342789 - cpr_init, Start
466<6>[ 0.863241] B - 346480 - Pre_DDR_clock_init, Start
467<6>[ 0.863256] B - 348584 - do ddr sanity test, Start
468<6>[ 0.863270] B - 348889 - pm_driver_init, Start
469<6>[ 0.863283] B - 354227 - vsense_init, Start
470<6>[ 0.863298] D - 274 - DDR Training restore, Delta
471<6>[ 0.863311] B - 365725 - clock_init, Start
472<6>[ 0.863327] B - 366000 - pm_sbl_set_qpnp_smb_init start
473<6>[ 0.863341] B - 366915 - raw vbat: 4173, gain: -19
474<6>[ 0.863357] B - 370361 - Manually set to USB500 mode
475<6>[ 0.863372] B - 374357 - raw vbat: 4173, gain: -19
476<6>[ 0.863387] B - 379176 - device will be power off
477<6>[ 0.863398] B - 381677 - Img Ld, S
478<6>[ 0.863416] D - 108183 - QSEE Image Loaded, Delta - (1370364 Bytes)
479<6>[ 0.863429] B - 489891 - Image Load, Start
480<6>[ 0.863447] D - 2318 - SEC Image Loaded, Delta - (2048 Bytes)
481<6>[ 0.863463] B - 497272 - sbl1_efs_handle_cookies, Start
482<6>[ 0.863475] B - 501572 - Board_rev:1.1
483<6>[ 0.863489] B - 503402 - read_usb_cable_type, s
484<6>[ 0.863507] B - 511485 - [ADC][usb_id=1786][cable_type=12]
485<6>[ 0.863523] B - 594262 - boot_power_longkey_check, start
486<6>[ 0.863537] B - 594292 - Restart cause restart
487<6>[ 0.863551] D - 1250 - boot_power_longkey, Delta
488<6>[ 0.863562] B - 599325 - Img Ld, S
489<6>[ 0.863581] D - 40687 - DEVCFG Image Loaded, Delta - (47756 Bytes)
490<6>[ 0.863592] B - 640500 - Img Ld, S
491<6>[ 0.863610] D - 34770 - APDP Image Loaded, Delta - (7696 Bytes)
492<6>[ 0.863621] B - 675300 - Img Ld, S
493<6>[ 0.863640] D - 46939 - RPM Image Loaded, Delta - (179504 Bytes)
494<6>[ 0.863651] B - 722240 - Img Ld, S
495<6>[ 0.863670] D - 67374 - APPSBL Image Loaded, Delta - (666520 Bytes)
496<6>[ 0.863684] B - 789645 - QSEE Execution, Start
497<6>[ 0.863694] B - 792054 - SBL1, End
498<6>[ 0.863705] D - 566568 - SBL1, Delta
499<6>[ 0.863716] S - Flash Perf, 22000 KB/s
500<6>[ 0.863726] S - DDR Freq. 662 MHz
501<6>[ 0.863736] S - Core 0 Freq. 800 MHz
502<6>[ 0.863747] [40] card->ext_csd[192]=7
503<6>[ 0.863778] [40] [FS] tuned_phase_cnt: 15 tuned_phases = [ 0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, ]
504<6>[ 0.863797] [40] [FS] sdhci_msm_execute_tuning: Tuned Phase: 0x0000000c
505<6>[ 0.863810] [50] set_dload_mode: download_mode:0
506<6>[ 0.863821] [50] Unsupported hardware id
507<6>[ 0.863833] [50] Qseecom Init Done in Appsbl
508<6>[ 0.863871] [50] secure app region addr=0x85500000 size=0xe00000[50] TZ App region notif returned with status:0 addr:85500000 size:14680064
509<6>[ 0.863895] [50] TZ App log region register returned with status:0 addr:8f6c1000 size:4096
510<6>[ 0.863909] [50] Qseecom TZ Init Done in Appsbl
511<6>[ 0.863919] [70] Loading cmnlib done
512<6>[ 0.863933] [90] <8>keymaster: "\"KEYMASTER Init \""
513<6>[ 0.863953] [100] <8>keymaster: "\"cmd_id=KEYMASTER_READ_KM_DEVICE_STATE\""
514<6>[ 0.863969] [110] oem.panel D : lgd_incell_db7400_hd_video
515<6>[ 0.863983] [240] Display Power Mode : 0, status : 0
516<6>[ 0.863999] [520] target_home_key: should be implemented
517<6>[ 0.864016] [520] target_selectmode_init: selectmode_get_mode()=0
518<6>[ 0.864029] [520] LGFTM_LAF_MID_REBOOT_FLAG is 0
519<6>[ 0.864041] [520] [LAF] boot_into_laf = 0
520<6>[ 0.864054] [520] LGE_DMS - CRC = 0 STAGE= 0
521<6>[ 0.864067] [520] boot from recovery partition
522<6>[ 0.864077] [520] Device is unlocked!
523<6>[ 0.864094] [640] get_image_info: img_info[0].name lglogo_image
524<6>[ 0.864113] [640] get_image_info: img_info[1].name LGE_PM_NO_CHARGER
525<6>[ 0.864132] [640] get_image_info: img_info[2].name LGE_PM_WEAK_CHARGING_ON
526<6>[ 0.864153] [640] get_image_info: img_info[3].name LGE_PM_NO_BATTERY_ANI_01
527<6>[ 0.864173] [640] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_02
528<6>[ 0.864191] [640] get_image_info: img_info[5].name downloadmode
529<6>[ 0.864210] [640] get_image_info: img_info[6].name load_charger_image
530<6>[ 0.864230] [640] get_image_info: img_info[7].name factory_reset_no_1st_image
531<6>[ 0.864251] [640] get_image_info: img_info[8].name factory_reset_yes_1st_image
532<6>[ 0.864272] [640] get_image_info: img_info[9].name factory_reset_no_2nd_image
533<6>[ 0.864293] [640] get_image_info: img_info[10].name factory_reset_yes_2nd_image
534<6>[ 0.864312] [640] get_image_info: img_info[11].name imei_guide_image
535<6>[ 0.864330] [640] get_image_info: img_info[12].name imei_main_image
536<6>[ 0.864349] [640] get_image_info: img_info[13].name kswitch_factory
537<6>[ 0.864367] [640] get_image_info: img_info[14].name kswitch_dload
538<6>[ 0.864385] [640] get_image_info: img_info[15].name system_errlogo
539<6>[ 0.864404] [640] get_image_info: img_info[16].name verifiedboot_red_01
540<6>[ 0.864423] [640] get_image_info: img_info[17].name verifiedboot_red_02
541<6>[ 0.864443] [640] get_image_info: img_info[18].name verifiedboot_orange_01
542<6>[ 0.864463] [640] get_image_info: img_info[19].name verifiedboot_orange_02
543<6>[ 0.864471] [650] EIO !!!
544<6>[ 0.864488] [1060] <8>keymaster: "\"cmd_id=KEYMASTER_SET_ROT\""
545<6>[ 0.864498] [1640] No unlock key!
546<6>[ 0.864516] [1660] <8>keymaster: "\"cmd_id=KEYMASTER_MILESTONE_CALL\""
547<6>[ 0.864530] [1660] Qseecom De-Init Done in Appsbl
548<6>[ 0.864540] [1660] Channel alloc freed
549<6>[ 0.864544]
550<6>[ 0.864549] bootlog_probe: token (null)
551<6>[ 0.864552] -------------------------------------------------
552<4>[ 0.864560] Trying to free nonexistent resource <00000000affc0000-00000000affdffff>
553<6>[ 0.864988] [QFUSE]lge_qfprom_probe : qfprom init
554<6>[ 0.865839] msm_serial_hs module loaded
555<6>[ 0.886116] brd: module loaded
556<6>[ 0.888376] loop: module loaded
557<6>[ 0.888723] zram: Created 1 device(s) ...
558<6>[ 0.889262] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
559<4>[ 0.889296] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
560<6>[ 0.889305] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
561<4>[ 0.889312] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
562<4>[ 0.889929] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
563<4>[ 0.891790] i2c-core: driver [tabla-i2c-core] using legacy suspend method
564<4>[ 0.891795] i2c-core: driver [tabla-i2c-core] using legacy resume method
565<4>[ 0.891897] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
566<4>[ 0.891902] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
567<4>[ 0.891997] i2c-core: driver [tasha-i2c-core] using legacy suspend method
568<4>[ 0.892001] i2c-core: driver [tasha-i2c-core] using legacy resume method
569<6>[ 0.892529] Loading PN547 driver
570<6>[ 0.892563] pn547: Start async init
571<6>[ 0.892659] pn547: pn547_probe() start
572<6>[ 0.892693] pn547:IRQ : 13
573<6>[ 0.892693] VEN : 16
574<6>[ 0.892693] FIRM : 130
575<6>[ 0.892820] pn547_probe : requesting IRQ 20
576<6>[ 0.892913] pn547: pn547_probe() end
577<6>[ 0.892920] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
578<6>[ 0.892949] pn547: Loading PN547 driver Success!
579<6>[ 0.893589] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000
580<6>[ 0.893600] qce 720000.qcedev: CE device = 0x0
581<6>[ 0.893600] , IO base, CE = 0xffffff8001cc0000
582<6>[ 0.893600] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
583<6>[ 0.893600] IO base BAM = 0x (null)
584<6>[ 0.893600] BAM IRQ 179
585<6>[ 0.893600] Engines Availability = 0x2010853
586<6>[ 0.893883] sps:BAM 0x0000000000704000 is registered.
587<6>[ 0.894095] sps:BAM 0x0000000000704000 (va:0xffffff8001dc0000) enabled: ver:0x27, number of pipes:8
588<6>[ 0.894358] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 179
589<6>[ 0.897222] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
590<6>[ 0.898259] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000
591<6>[ 0.898269] qcrypto 720000.qcrypto: CE device = 0x0
592<6>[ 0.898269] , IO base, CE = 0xffffff8001e00000
593<6>[ 0.898269] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
594<6>[ 0.898269] IO base BAM = 0x (null)
595<6>[ 0.898269] BAM IRQ 179
596<6>[ 0.898269] Engines Availability = 0x2010853
597<6>[ 0.898616] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 179
598<6>[ 0.900819] qcrypto 720000.qcrypto: qcrypto-ecb-aes
599<6>[ 0.900952] qcrypto 720000.qcrypto: qcrypto-cbc-aes
600<6>[ 0.901085] qcrypto 720000.qcrypto: qcrypto-ctr-aes
601<6>[ 0.901216] qcrypto 720000.qcrypto: qcrypto-ecb-des
602<6>[ 0.901348] qcrypto 720000.qcrypto: qcrypto-cbc-des
603<6>[ 0.901479] qcrypto 720000.qcrypto: qcrypto-ecb-3des
604<6>[ 0.901610] qcrypto 720000.qcrypto: qcrypto-cbc-3des
605<6>[ 0.901741] qcrypto 720000.qcrypto: qcrypto-xts-aes
606<6>[ 0.901886] qcrypto 720000.qcrypto: qcrypto-sha1
607<6>[ 0.902017] qcrypto 720000.qcrypto: qcrypto-sha256
608<6>[ 0.902155] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
609<6>[ 0.902287] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
610<6>[ 0.902418] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
611<6>[ 0.902551] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
612<6>[ 0.902684] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
613<6>[ 0.902816] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
614<6>[ 0.902948] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
615<6>[ 0.903080] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
616<6>[ 0.903214] qcrypto 720000.qcrypto: qcrypto-aes-ccm
617<6>[ 0.903348] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
618<3>[ 0.904339] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
619<6>[ 0.904473] ICE IRQ = 181
620<6>[ 0.905534] SCSI Media Changer driver v0.25
621<6>[ 0.918588] tun: Universal TUN/TAP device driver, 1.6
622<6>[ 0.918593] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
623<6>[ 0.921519] PPP generic driver version 2.4.2
624<6>[ 0.921621] PPP BSD Compression module registered
625<6>[ 0.921630] PPP Deflate Compression module registered
626<6>[ 0.921652] PPP MPPE Compression module registered
627<6>[ 0.921665] NET: Registered protocol family 24
628<6>[ 0.922450] wcnss_wlan probed in built-in mode
629<6>[ 0.923963] usbcore: registered new interface driver asix
630<6>[ 0.924047] usbcore: registered new interface driver ax88179_178a
631<6>[ 0.924091] usbcore: registered new interface driver cdc_ether
632<6>[ 0.924137] usbcore: registered new interface driver net1080
633<6>[ 0.924181] usbcore: registered new interface driver cdc_subset
634<6>[ 0.924224] usbcore: registered new interface driver zaurus
635<6>[ 0.924465] usbcore: registered new interface driver cdc_ncm
636<6>[ 0.925016] msm_sharedmem: sharedmem_register_qmi: qmi init successful
637<3>[ 0.926222] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
638<6>[ 0.926229] hyp_assign_table: Failed to assign memory protection, ret = -5
639<3>[ 0.926238] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000fe100000 size=1572864 err=-5
640<6>[ 0.926354] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
641<6>[ 0.926864] msm_otg 78db000.usb: msm_otg probe
642<6>[ 0.930397] msm_otg 78db000.usb: OTG regs = ffffff800163a000
643<6>[ 0.935703] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
644<6>[ 0.936063] ehci-pci: EHCI PCI platform driver
645<6>[ 0.936109] ehci-msm: Qualcomm On-Chip EHCI Host Controller
646<3>[ 0.936579] Unable to get vbus_otg
647<3>[ 0.936587] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
648<6>[ 0.936683] usbcore: registered new interface driver cdc_acm
649<6>[ 0.936688] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
650<6>[ 0.936749] usbcore: registered new interface driver usb-storage
651<6>[ 0.936788] usbcore: registered new interface driver ums-alauda
652<6>[ 0.936827] usbcore: registered new interface driver ums-cypress
653<6>[ 0.936866] usbcore: registered new interface driver ums-datafab
654<6>[ 0.936904] usbcore: registered new interface driver ums-freecom
655<6>[ 0.936946] usbcore: registered new interface driver ums-isd200
656<6>[ 0.936986] usbcore: registered new interface driver ums-jumpshot
657<6>[ 0.937024] usbcore: registered new interface driver ums-karma
658<6>[ 0.937065] usbcore: registered new interface driver ums-sddr09
659<6>[ 0.937105] usbcore: registered new interface driver ums-sddr55
660<6>[ 0.937146] usbcore: registered new interface driver ums-usbat
661<6>[ 0.937254] usbcore: registered new interface driver usbserial
662<6>[ 0.937300] usbcore: registered new interface driver usb_ehset_test
663<6>[ 0.938081] gbridge_init: gbridge_init successs.
664<6>[ 0.938718] u_lgeusb init
665<6>[ 0.939293] mousedev: PS/2 mouse device common for all mice
666<6>[ 0.939509] usbcore: registered new interface driver xpad
667<3>[ 0.939519] [TOUCH][F][I2C] touch_i2c_init()
668<3>[ 0.939524] [TOUCH][L][MISC] Touch Module Get. Module index = 0
669<3>[ 0.939784] [TOUCH][F][I2C] touch_i2c_probe()
670<6>[ 0.940964] input: hbtp_vm as /devices/virtual/input/input1
671<6>[ 0.941862] qcom,qpnp-rtc qpnp-rtc-7: rtc core: registered qpnp_rtc as rtc0
672<6>[ 0.942055] i2c /dev entries driver
673<3>[ 0.947658] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
674<3>[ 0.948013] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
675<3>[ 0.948338] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
676<3>[ 0.951246] msm_camera_get_dt_vreg_data:1133 number of entries is 0 or not present in dts
677<3>[ 0.956349] msm_camera_get_dt_vreg_data:1133 number of entries is 0 or not present in dts
678<3>[ 0.957803] msm_camera_get_dt_vreg_data:1133 number of entries is 0 or not present in dts
679<3>[ 0.959246] msm_camera_get_dt_vreg_data:1133 number of entries is 0 or not present in dts
680<3>[ 0.959925] msm_camera_pinctrl_init:1295 Getting pinctrl handle failed
681<3>[ 0.959932] msm_actuator_platform_probe:1954 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
682<4>[ 0.960047] qcom,actuator: probe of 1b0c000.qcom,cci:qcom,actuator@0 failed with error -22
683<6>[ 0.967768] msm_cci_init:1381: hw_version = 0x10020004
684<3>[ 0.967801] qcom,slave-addr = 0xA1
685<3>[ 0.975730] qcom,slave-addr = 0xA3
686<3>[ 0.983642] qcom,slave-addr = 0xA5
687<3>[ 0.991550] qcom,slave-addr = 0xA7
688<3>[ 0.999454] qcom,slave-addr = 0xA9
689<3>[ 1.007528] qcom,slave-addr = 0xAB
690<3>[ 1.015602] qcom,slave-addr = 0xAD
691<3>[ 1.023645] qcom,slave-addr = 0xAF
692<3>[ 1.031663] msm_eeprom_checksum, e_ctrl->cal_data.num_data = 0x0800
693<3>[ 1.031670] msm_eeprom_checksum_lgit eeprom_ver = 0xFF
694<3>[ 1.031681] EEPROM data verified
695<3>[ 1.031687] msm_eeprom_platform_probe:main_sensor_id 0x1
696<6>[ 1.047735] MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x40030002
697<3>[ 1.047748] MSM-CPP cpp_init_hardware:881 stream_cnt:0
698<3>[ 1.064469] __msm_jpeg_init:1537] Jpeg Device id 0
699<6>[ 1.066087] usbcore: registered new interface driver uvcvideo
700<6>[ 1.066093] USB Video Class driver (1.1.1)
701<3>[ 1.067037] lge_battery_id soc:lge,battery-id: LGE Battery ID Checker started
702<6>[ 1.067046] [FG_EST] battery num 6
703<6>[ 1.067051] [FG_EST] battery array 1 index = [0] id = [0]
704<6>[ 1.067055] [FG_EST] battery array 1 index = [1] id = [1]
705<6>[ 1.067060] [FG_EST] battery array 1 index = [2] id = [130]
706<6>[ 1.067064] [FG_EST] battery array 1 index = [3] id = [147]
707<6>[ 1.067068] [FG_EST] battery array 1 index = [4] id = [187]
708<6>[ 1.067072] [FG_EST] battery array 1 index = [5] id = [204]
709<6>[ 1.067077] [FG_EST] battery cell type [LGE_BL45B1F_LGC_3000mAh]
710<6>[ 1.067081] [FG_EST] battery cell type [LGE_BL45B1F_LGC_3000mAh]
711<6>[ 1.067085] [FG_EST] battery cell type [LGE_BL45B1F_Tocad_3000mAh]
712<6>[ 1.067088] [FG_EST] battery cell type [LGE_BL45B1F_LGC_3000mAh]
713<6>[ 1.067092] [FG_EST] battery cell type [LGE_BL45B1F_LGC_3000mAh]
714<6>[ 1.067096] [FG_EST] battery cell type [LGE_BL45B1F_Tocad_3000mAh]
715<6>[ 1.067109] Battery was read in sbl is = 204
716<6>[ 1.067615] FG: fg_of_init: battery aging mode: 2
717<6>[ 1.067625] FG: fg_of_init: Using external sense
718<6>[ 1.067635] FG: fg_of_init: lge_rid_disable : 0
719<6>[ 1.067653] FG: fg_of_init: slope-limiter, temp: 100 coeffs: [14 6 14 6]
720<6>[ 1.067673] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:7 MedC_Gain:5 HighC_Gain: 5
721<6>[ 1.067678] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:15 MedC_Gain:4 HighC_Gain: 5
722<6>[ 1.067683] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:20 MedC_Gain:4 HighC_Gain: 4
723<6>[ 1.067697] FG: fg_of_init: batt-temp-low_limit: -600 batt-temp-high_limit: 1500
724<6>[ 1.067703] FG: fg_of_init: cc-soc-limit-pct: 120
725<6>[ 1.067719] FG: fg_of_init: slope-limiter, temp: 100 coeffs: [14 6 14 6]
726<6>[ 1.067738] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:7 MedC_Gain:5 HighC_Gain: 5
727<6>[ 1.067743] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:15 MedC_Gain:4 HighC_Gain: 5
728<6>[ 1.067748] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:20 MedC_Gain:4 HighC_Gain: 4
729<6>[ 1.067758] FG: fg_of_init: batt-temp-low_limit: -600 batt-temp-high_limit: 1500
730<6>[ 1.067763] FG: fg_of_init: cc-soc-limit-pct: 120
731<6>[ 1.067770] FG: fg_of_init: restore: 0 validate_by_ocv: 0 range_pct: 0
732<6>[ 1.067985] FG: fg_soc_irq_handler: triggered 0x20
733<6>[ 1.068007] FG: fg_soc_irq_handler: last_soc: 167
734<6>[ 1.068036] FG: discharge_gain_work: Capacity: 50, medc_gain: 3 highc_gain: 2
735<3>[ 1.068253] FG: cc_soc_store_work: nom_cap_uah zero!
736<6>[ 1.068315] FG: discharge_gain_work: Value [0 82] written to ki_coeff_medc
737<6>[ 1.068414] FG: fg_first_soc_irq_handler: triggered
738<6>[ 1.068557] FG: fg_config_esr_extract: ESR extract already enabled
739<6>[ 1.068612] FG: discharge_gain_work: Value [0 80] written to ki_coeff_highc
740<6>[ 1.068735] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
741<6>[ 1.069061] FG: fg_vbatt_low_handler: vbatt-low triggered
742<6>[ 1.069075] FG: fg_vbatt_low_handler: Vbatt is high
743<6>[ 1.069443] FG: fg_age_detection: battery age not init
744<6>[ 1.069879] FG: fg_age_detection: battery age not init
745<6>[ 1.069992] FG: fg_probe: rbias software control : 0
746<6>[ 1.070003] FG: update_iterm: current = -200, converted_raw = fae2, data = e2 fa
747<6>[ 1.070066] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=17
748<6>[ 1.070076] FG: fg_age_detection: battery age not init
749<6>[ 1.070085] FG: fg_batt_print_work: [FG_INFO]:RS=0x0, BS=0, QS=0, SOC=50, Rem=0, Voltage=0mV,OCV=0mV, Current=0mA, Temp=20, Age=1, cycle=0
750<6>[ 1.070350] FG: update_cutoff_voltage: voltage = 3200, converted_raw = 51eb, data = eb 51
751<3>[ 1.070418] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
752<6>[ 1.070470] SMBCHG: smbchg_check_chg_version: pmic=PMI8950, wa_flags=0x4e, hvdcp_supported=true
753<6>[ 1.070508] SMBCHG: smb_parse_dt: parallel usb thr: 1400, 9v thr: 900
754<6>[ 1.070530] SMBCHG: smb_parse_dt: soc recharging is enabled
755<6>[ 1.070664] smbcharger_charger_otg: no parameters
756<6>[ 1.070788] SMBCHG: smbchg_hw_init: Charger Revision DIG: 0.0; ANA: 0.1
757<3>[ 1.070795] SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb enable 0 last_enable 0
758<6>[ 1.070858] SMBCHG: smbchg_set_aicl_rerun_period_s: aicl rerun period set to 180s
759<6>[ 1.071402] SMBCHG: smbchg_hw_init: set vfloat to 4400
760<6>[ 1.071456] SMBCHG: smbchg_iterm_set: set tcc (100) to 0x02
761<6>[ 1.071568] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
762<6>[ 1.071608] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
763<3>[ 1.071670] FG: fg_set_resume_soc: [FG_INFO]set recharging soc = 245
764<6>[ 1.071702] FG: fg_config_esr_extract: ESR extract already enabled
765<6>[ 1.071709] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
766<6>[ 1.071792] SMBCHG: smbchg_usb_update_online_work: setting usb psy online = 0
767<6>[ 1.072036] SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 1200, set to 1200
768<6>[ 1.072338] SMBCHG: smbchg_hw_init: Initial VFLOAT_TRIM reg = 0x1c
769<6>[ 1.072352] SMBCHG: batt_pres_handler: triggered: 0x00
770<6>[ 1.072357] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
771<6>[ 1.072387] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
772<6>[ 1.072457] FG: fg_config_esr_extract: ESR extract already enabled
773<6>[ 1.072463] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
774<6>[ 1.072502] SMBCHG: batt_hot_handler: triggered: 0x00
775<6>[ 1.072508] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
776<6>[ 1.072544] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
777<6>[ 1.072594] FG: set_prop_sense_type: [FG_OPTION]sensor type = 1
778<6>[ 1.072637] FG: fg_config_esr_extract: ESR extract already enabled
779<6>[ 1.072644] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
780<6>[ 1.072685] SMBCHG: batt_warm_handler: triggered: 0x00
781<6>[ 1.072714] SMBCHG: batt_cool_handler: triggered: 0x00
782<6>[ 1.072745] SMBCHG: batt_cold_handler: triggered: 0x00
783<6>[ 1.072751] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
784<6>[ 1.072779] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
785<6>[ 1.072860] FG: fg_config_esr_extract: ESR extract already enabled
786<6>[ 1.072865] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
787<6>[ 1.072885] SMBCHG: usbid_change_handler: triggered
788<6>[ 1.072913] SMBCHG: usbid_change_handler: setting usb psy OTG = 0
789<6>[ 1.072955] msm_otg 78db000.usb: ID status_w
790<6>[ 1.072964] ID set
791<6>[ 1.073069] FG: fg_config_esr_extract: ESR extract already enabled
792<6>[ 1.073074] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
793<6>[ 1.073129] SMBCHG: determine_initial_status: setting usb psy dp=f dm=f
794<6>[ 1.073155] SMBCHG: handle_usb_insertion: triggered
795<6>[ 1.073263] SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
796<6>[ 1.073273] SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
797<6>[ 1.073279] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
798<6>[ 1.073333] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 150 mA
799<6>[ 1.073524] SMBCHG: handle_usb_insertion: setting usb psy present = 1
800<6>[ 1.073575] msm_otg 78db000.usb: Unable to get qpnp adc
801<6>[ 1.073589] SMBCHG: handle_usb_insertion: setting usb psy health GOOD
802<6>[ 1.073704] SMBCHG: smbchg_usb_update_online_work: setting usb psy online = 1
803<6>[ 1.074163] FG: fg_age_detection: battery age not init
804<6>[ 1.074186] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19331977, ocv=-22, ibat=173568, rbatt=99978
805<6>[ 1.074861] FG: fg_age_detection: battery age not init
806<6>[ 1.074881] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19331977, ocv=-22, ibat=173568, rbatt=99978
807<3>[ 1.078890] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
808<4>[ 1.078945] ------------[ cut here ]------------
809<4>[ 1.078959] WARNING: CPU: 1 PID: 1 at ../../../../../../kernel/lge/msm8937/drivers/base/core.c:548 device_create_file+0x80/0xb0()
810<4>[ 1.078964] Attribute chgstep: write permission without 'store'
811<4>[ 1.078967] Modules linked in:
812<4>[ 1.078977] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-perf-gb516998-01758-gc95442f-dirty #1
813<4>[ 1.078981] Hardware name: Qualcomm Technologies, Inc. MSM8937-PMI8950 MTP (DT)
814<0>[ 1.078987] Call trace:
815<4>[ 1.078995] [<ffffffc000089afc>] dump_backtrace+0x0/0x23c
816<4>[ 1.079002] [<ffffffc000089d4c>] show_stack+0x14/0x1c
817<4>[ 1.079010] [<ffffffc000e5c0c0>] dump_stack+0x80/0xa4
818<4>[ 1.079019] [<ffffffc0000a2da0>] warn_slowpath_common+0x8c/0xb0
819<4>[ 1.079025] [<ffffffc0000a2e24>] warn_slowpath_fmt+0x60/0x80
820<4>[ 1.079032] [<ffffffc00051b88c>] device_create_file+0x80/0xb0
821<4>[ 1.079041] [<ffffffc000800164>] smbchg_probe+0x1f0c/0x28d4
822<4>[ 1.079050] [<ffffffc000ac74c4>] spmi_drv_probe+0x14/0x1c
823<4>[ 1.079057] [<ffffffc00051fe04>] driver_probe_device+0xd8/0x224
824<4>[ 1.079063] [<ffffffc000520000>] __driver_attach+0x64/0x90
825<4>[ 1.079070] [<ffffffc00051ef00>] bus_for_each_dev+0x80/0xb0
826<4>[ 1.079075] [<ffffffc00051f8cc>] driver_attach+0x20/0x28
827<4>[ 1.079081] [<ffffffc00051f56c>] bus_add_driver+0xfc/0x1cc
828<4>[ 1.079087] [<ffffffc0005209b4>] driver_register+0x94/0xe0
829<4>[ 1.079094] [<ffffffc000ac78d8>] spmi_driver_register+0x5c/0x64
830<4>[ 1.079100] [<ffffffc00169cc68>] smbchg_init+0x18/0x20
831<4>[ 1.079107] [<ffffffc000082ae4>] do_one_initcall+0x18c/0x1a8
832<4>[ 1.079114] [<ffffffc00165eafc>] kernel_init_freeable+0x148/0x1e4
833<4>[ 1.079121] [<ffffffc000e55a38>] kernel_init+0x14/0xd8
834<4>[ 1.079125] ---[ end trace cb88537fdc8fa201 ]---
835<6>[ 1.079134] SMBCHG: smbchg_probe: setting usb psy present = 1
836<6>[ 1.079181] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
837<6>[ 1.079215] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 0
838<6>[ 1.079221] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
839<6>[ 1.079252] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
840<6>[ 1.079270] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
841<6>[ 1.079313] SMBCHG: power_ok_handler: triggered: 0x00
842<6>[ 1.079319] SMBCHG: smbchg_usb_update_online_work: Updating by force
843<6>[ 1.079324] SMBCHG: smbchg_usb_update_online_work: setting usb psy online = 0
844<6>[ 1.079340] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
845<6>[ 1.079492] FG: fg_age_detection: battery age not init
846<6>[ 1.079518] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19331977, ocv=-22, ibat=173568, rbatt=99978
847<6>[ 1.079628] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
848<6>[ 1.079672] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 0
849<6>[ 1.079679] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
850<6>[ 1.079741] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
851<6>[ 1.079881] FG: fg_age_detection: battery age not init
852<6>[ 1.079902] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19331977, ocv=-22, ibat=173568, rbatt=99978
853<6>[ 1.080130] FG: fg_config_esr_extract: ESR extract already enabled
854<6>[ 1.080136] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
855<3>[ 1.081184] SMBCHG: vadc_set_work: failed to initialize vadc
856<6>[ 1.081201] qpnp-smbcharger qpnp-smbcharger-17: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=1
857<3>[ 1.082276] unable to find DT imem DLOAD mode node
858<3>[ 1.082813] unable to find DT imem EDLOAD mode node
859<6>[ 1.082963] FG: fg_common_hw_init: ESR extract is enabled
860<6>[ 1.083358] FG: fg_common_hw_init: imptr_pulse_slow is enabled
861<6>[ 1.083752] FG: fg_common_hw_init: rslow_comp active is disabled
862<6>[ 1.084144] FG: fg_common_hw_init: rslow_comp active is disabled
863<4>[ 1.084392] thermal thermal_zone2: failed to read out thermal zone 2
864<4>[ 1.084647] thermal thermal_zone3: failed to read out thermal zone 3
865<4>[ 1.084895] thermal thermal_zone4: failed to read out thermal zone 4
866<4>[ 1.085140] thermal thermal_zone5: failed to read out thermal zone 5
867<3>[ 1.085731] qpnp_vadc_read: Error reading die_temp
868<6>[ 1.107333] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
869<6>[ 1.107489] device-mapper: req-crypt: dm-req-crypt successfully initalized.
870<6>[ 1.107489]
871<6>[ 1.108660] sdhci: Secure Digital Host Controller Interface driver
872<6>[ 1.108665] sdhci: Copyright(c) Pierre Ossman
873<6>[ 1.108672] sdhci-pltfm: SDHCI platform and OF driver helper
874<6>[ 1.109510] qcom_ice_get_pdevice: found ice device ffffffc003cee600
875<6>[ 1.109516] qcom_ice_get_pdevice: matching platform device ffffffc079956c00
876<6>[ 1.113066] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8001b60000
877<6>[ 1.113473] sdhci_msm 7824900.sdhci: No vmmc regulator found
878<6>[ 1.113480] sdhci_msm 7824900.sdhci: No vqmmc regulator found
879<6>[ 1.113871] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode
880<4>[ 1.142992] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
881<6>[ 1.157794] sdhci_msm 7864900.sdhci: No vmmc regulator found
882<6>[ 1.157804] sdhci_msm 7864900.sdhci: No vqmmc regulator found
883<6>[ 1.158232] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode
884<6>[ 1.187268] lge_get_boot_mode : 0
885<6>[ 1.187284] lge_get_boot_mode : 0
886<6>[ 1.190352] tz_log 8600720.tz-log: Hyp log service is not supported
887<6>[ 1.191725] hidraw: raw HID events driver (C) Jiri Kosina
888<6>[ 1.192273] usbcore: registered new interface driver usbhid
889<6>[ 1.192279] usbhid: USB HID core driver
890<6>[ 1.192684] ashmem: initialized
891<6>[ 1.193346] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
892<6>[ 1.197385] mmc0: Out-of-interrupt timeout is 100[ms]
893<6>[ 1.197393] mmc0: BKOPS_EN equals 0x0
894<6>[ 1.197399] mmc0: eMMC FW version: 0x08
895<6>[ 1.197405] mmc0: cache barrier support 0 flush policy 0
896<6>[ 1.199422] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
897<3>[ 1.202875] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
898<3>[ 1.203064] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
899<6>[ 1.205238] coresight-fuse a601c.fuse: Fuse initialized
900<4>[ 1.205723] coresight-cti: probe of 6010000.cti failed with error -1
901<4>[ 1.205771] coresight-cti: probe of 6011000.cti failed with error -1
902<4>[ 1.205802] coresight-cti: probe of 6012000.cti failed with error -1
903<4>[ 1.205833] coresight-cti: probe of 6013000.cti failed with error -1
904<4>[ 1.205863] coresight-cti: probe of 6014000.cti failed with error -1
905<4>[ 1.205894] coresight-cti: probe of 6015000.cti failed with error -1
906<4>[ 1.205925] coresight-cti: probe of 6016000.cti failed with error -1
907<4>[ 1.205996] coresight-cti: probe of 6017000.cti failed with error -1
908<4>[ 1.206027] coresight-cti: probe of 6018000.cti failed with error -1
909<4>[ 1.206058] coresight-cti: probe of 6019000.cti failed with error -1
910<4>[ 1.206088] coresight-cti: probe of 601a000.cti failed with error -1
911<4>[ 1.206118] coresight-cti: probe of 601b000.cti failed with error -1
912<4>[ 1.206166] coresight-cti: probe of 601c000.cti failed with error -1
913<4>[ 1.206197] coresight-cti: probe of 601d000.cti failed with error -1
914<4>[ 1.206227] coresight-cti: probe of 601e000.cti failed with error -1
915<4>[ 1.206257] coresight-cti: probe of 601f000.cti failed with error -1
916<4>[ 1.206288] coresight-cti: probe of 61b8000.cti failed with error -1
917<4>[ 1.206317] coresight-cti: probe of 61b9000.cti failed with error -1
918<4>[ 1.206398] coresight-cti: probe of 61ba000.cti failed with error -1
919<4>[ 1.206429] coresight-cti: probe of 61bb000.cti failed with error -1
920<4>[ 1.206459] coresight-cti: probe of 6198000.cti failed with error -1
921<4>[ 1.206490] coresight-cti: probe of 6199000.cti failed with error -1
922<4>[ 1.206520] coresight-cti: probe of 619a000.cti failed with error -1
923<4>[ 1.206568] coresight-cti: probe of 619b000.cti failed with error -1
924<4>[ 1.206598] coresight-cti: probe of 6124000.cti failed with error -1
925<4>[ 1.206628] coresight-cti: probe of 6139000.cti failed with error -1
926<4>[ 1.206658] coresight-cti: probe of 6134000.cti failed with error -1
927<4>[ 1.206688] coresight-cti: probe of 613c000.cti failed with error -1
928<4>[ 1.206718] coresight-cti: probe of 610c000.cti failed with error -1
929<6>[ 1.207204] coresight-csr 6001000.csr: CSR initialized
930<4>[ 1.207629] coresight-tmc: probe of 6028000.tmc failed with error -1
931<3>[ 1.207794] coresight-tmc 6027000.tmc: failed to get flush cti
932<3>[ 1.207801] coresight-tmc 6027000.tmc: failed to get reset cti
933<6>[ 1.207969] coresight-tmc 6027000.tmc: TMC initialized
934<6>[ 1.209841] nidnt boot config: 2
935<3>[ 1.209846] NIDnT disabled, only sd mode supported.
936<6>[ 1.209852] coresight-tpiu 6020000.tpiu: NIDnT hw support disabled
937<6>[ 1.209859] coresight-tpiu 6020000.tpiu: NIDnT on SDCARD only mode
938<6>[ 1.209987] coresight-tpiu 6020000.tpiu: TPIU initialized
939<6>[ 1.212644] coresight-replicator 6026000.replicator: REPLICATOR initialized
940<4>[ 1.213213] coresight-stm: probe of 6002000.stm failed with error -1
941<6>[ 1.213868] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
942<6>[ 1.215114] usbcore: registered new interface driver snd-usb-audio
943<6>[ 1.217760] mmc0: new HS400 MMC card at address 0001
944<6>[ 1.218136] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2 (0xffffffc078455180)
945<6>[ 1.218148] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2 (0xffffffc078455188)
946<6>[ 1.218276] mmcblk0: mmc0:0001 HAG2e 14.6 GiB
947<6>[ 1.218408] mmcblk0rpmb: mmc0:0001 HAG2e partition 3 4.00 MiB
948<6>[ 1.221184] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 p62 p63 p64 p65 p66
949<6>[ 1.234985] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
950<6>[ 1.241377] u32 classifier
951<6>[ 1.241382] Actions configured
952<6>[ 1.241423] Netfilter messages via NETLINK v0.30.
953<6>[ 1.241480] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
954<6>[ 1.241839] ctnetlink v0.93: registering with nfnetlink.
955<6>[ 1.242548] xt_time: kernel timezone is -0000
956<6>[ 1.242807] ip_tables: (C) 2000-2006 Netfilter Core Team
957<6>[ 1.242989] arp_tables: (C) 2002 David S. Miller
958<6>[ 1.243042] TCP: cubic registered
959<6>[ 1.243050] Initializing XFRM netlink socket
960<6>[ 1.243513] NET: Registered protocol family 10
961<6>[ 1.244475] mip6: Mobile IPv6
962<6>[ 1.244504] ip6_tables: (C) 2000-2006 Netfilter Core Team
963<6>[ 1.244654] sit: IPv6 over IPv4 tunneling driver
964<6>[ 1.245104] NET: Registered protocol family 17
965<6>[ 1.245132] NET: Registered protocol family 15
966<6>[ 1.245174] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
967<6>[ 1.245185] Ebtables v2.0 registered
968<6>[ 1.245331] Bluetooth: ffffffc00d277cd8
969<6>[ 1.245344] Bluetooth: ffffffc00d277cc8Bluetooth: ffffffc00d277d08
970<6>[ 1.245379] Bluetooth: ffffffc00d277ce8Bluetooth: ffffffc00d277ce8
971<6>[ 1.245392] Bluetooth: ffffffc00d277cc8Bluetooth: ffffffc00d277d38
972<6>[ 1.245409] Bluetooth: ffffffc00d277d18<6>[ 1.245461] l2tp_core: L2TP core driver, V2.0
973<6>[ 1.245479] l2tp_ppp: PPPoL2TP kernel driver, V2.0
974<6>[ 1.245488] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
975<6>[ 1.245509] l2tp_netlink: L2TP netlink interface
976<6>[ 1.245539] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
977<6>[ 1.245565] l2tp_debugfs: L2TP debugfs support
978<6>[ 1.245573] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
979<6>[ 1.246304] NET: Registered protocol family 27
980<6>[ 1.252170] subsys-pil-tz c200000.qcom,lpass: for adsp segments only will be dumped.
981<6>[ 1.254175] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
982<6>[ 1.257024] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
983<3>[ 1.290318] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
984<3>[ 1.290365] usb-type-c-pericom 2-001d: i2c write to [1d] failed -107
985<3>[ 1.290374] usb-type-c-pericom 2-001d: i2c access failed
986<6>[ 1.292364] msm_otg 78db000.usb: phy_reset: success
987<3>[ 1.330369] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x091343c8 OPER:0x00000090
988<3>[ 1.330411] usb-type-c-pericom 2-001d: i2c write to [1d] failed -107
989<3>[ 1.330420] usb-type-c-pericom 2-001d: i2c access failed
990<5>[ 1.332644] Registered cp15_barrier emulation handler
991<5>[ 1.332662] Registered setend emulation handler
992<6>[ 1.332701] Creating CPU group 0
993<6>[ 1.332706] Init CPU0 state
994<6>[ 1.332709] Init CPU1 state
995<6>[ 1.332713] Init CPU2 state
996<6>[ 1.332716] Init CPU3 state
997<6>[ 1.332905] Creating CPU group 4
998<6>[ 1.332910] Init CPU4 state
999<6>[ 1.332913] Init CPU5 state
1000<6>[ 1.332917] Init CPU6 state
1001<6>[ 1.332920] Init CPU7 state
1002<6>[ 1.380055] Cable type is already defined
1003<6>[ 1.395281] lge_pm_get_cable_info : adc_read-1789000
1004<3>[ 1.395288]
1005<3>[ 1.395288]
1006<3>[ 1.395288] [PM]Cable detected: 1789000(OPEN)(1200, 500)
1007<3>[ 1.395288]
1008<3>[ 1.401483] IPA HW is not supported on this target
1009<6>[ 1.401528] setting usb power supply type 4
1010<6>[ 1.401551] msm_otg 78db000.usb: Avail curr from USB = 500
1011<6>[ 1.401699] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1012<6>[ 1.401729] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1013<6>[ 1.401736] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
1014<6>[ 1.401823] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
1015<6>[ 1.401842] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1016<6>[ 1.401848] SMBCHG: power_ok_handler: triggered: 0x01
1017<6>[ 1.401930] SMBCHG: smbchg_usb_update_online_work: setting usb psy online = 1
1018<6>[ 1.401952] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1019<6>[ 1.402182] FG: fg_age_detection: battery age not init
1020<6>[ 1.402208] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19495917, ocv=-22, ibat=437988, rbatt=99978
1021<6>[ 1.402329] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1022<6>[ 1.402353] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1023<6>[ 1.402360] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1024<6>[ 1.402428] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1025<6>[ 1.402645] FG: fg_age_detection: battery age not init
1026<6>[ 1.402667] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19495917, ocv=-22, ibat=437988, rbatt=99978
1027<6>[ 1.438168] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1028<6>[ 1.438182] SMBCHG: power_ok_handler: triggered: 0x00
1029<6>[ 1.439552] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS 4877 mV
1030<6>[ 1.439576] SMBCHG: usbin_uv_handler: usb_type[SDP]
1031<6>[ 1.439590] SMBCHG: increment_uv_irq_count: uv_irq_count[1]
1032<6>[ 1.439596] SMBCHG: usbin_uv_handler: setting usb psy health UNSPEC_FAILURE
1033<6>[ 1.439639] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1034<6>[ 1.439664] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1035<6>[ 1.439672] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1036<6>[ 1.439748] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1037<6>[ 1.439970] FG: fg_age_detection: battery age not init
1038<6>[ 1.439993] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19495917, ocv=-22, ibat=437988, rbatt=99978
1039<6>[ 1.458610] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1040<6>[ 1.458619] SMBCHG: power_ok_handler: triggered: 0x01
1041<6>[ 1.466058] power_sysfs_parse_dt : Total sysfs node is 54
1042<6>[ 1.467050] power_sysfs_probe : Success Power sysfs Init
1043<6>[ 1.467633] monitor-thermal soc:lge,monitor-thermal: LGE monitor thermal Initialized
1044<6>[ 1.468323] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped.
1045<6>[ 1.494377] SMBCHG: power_ok_handler: triggered: 0x00
1046<6>[ 1.494407] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1047<6>[ 1.495681] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS 4879 mV
1048<6>[ 1.495705] SMBCHG: usbin_uv_handler: usb_type[SDP]
1049<6>[ 1.495719] SMBCHG: increment_uv_irq_count: uv_irq_count[2]
1050<6>[ 1.495725] SMBCHG: usbin_uv_handler: setting usb psy health UNSPEC_FAILURE
1051<6>[ 1.495775] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1052<6>[ 1.495800] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1053<6>[ 1.495810] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1054<6>[ 1.495899] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1055<6>[ 1.496124] FG: fg_age_detection: battery age not init
1056<6>[ 1.496150] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19277330, ocv=-22, ibat=85428, rbatt=99978
1057<3>[ 1.510381] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
1058<3>[ 1.510427] usb-type-c-pericom 2-001d: i2c write to [1d] failed -107
1059<3>[ 1.510436] usb-type-c-pericom 2-001d: i2c access failed
1060<6>[ 1.511038] RNDIS_IPA module is loaded.
1061<6>[ 1.511566] usb_gadget_probe_driver
1062<6>[ 1.511572] gadget name udc->gadget->name ci13xxx_msm
1063<6>[ 1.511576]
1064<6>[ 1.511576] ********************************************
1065<6>[ 1.511580]
1066<6>[ 1.511580] No of UDCs: 1
1067<6>[ 1.511585] driver->function: android_usb
1068<6>[ 1.511587]
1069<6>[ 1.511587] ********************************************
1070<6>[ 1.511592] udc->gadget->usb_core_id : 0
1071<6>[ 1.511595]
1072<6>[ 1.511595] driver->usb_core_id: 0
1073<6>[ 1.511895] file system registered
1074<6>[ 1.511964] mbim_init: initialize 1 instances
1075<6>[ 1.512032] mbim_init: Initialized 1 ports
1076<6>[ 1.514042] rndis_qc_init: initialize rndis QC instance
1077<6>[ 1.514361] Number of LUNs=8
1078<6>[ 1.514369] Mass Storage Function, version: 2009/09/11
1079<6>[ 1.514376] LUN: removable file: (no medium)
1080<6>[ 1.514391] Number of LUNs=1
1081<6>[ 1.514442] LUN: removable file: (no medium)
1082<6>[ 1.514447] Number of LUNs=1
1083<6>[ 1.514837] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1084<6>[ 1.514845] SMBCHG: power_ok_handler: triggered: 0x01
1085<6>[ 1.514855] android_usb gadget: android_usb ready
1086<6>[ 1.514864] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
1087<6>[ 1.514895] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
1088<6>[ 1.514906] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
1089<6>[ 1.514914] udc->gadget->name: ci13xxx_msm
1090<6>[ 1.516755] hall_ic switch registration succeeded
1091<6>[ 1.516909] stylus_pen switch registration succeeded<6>[ 1.517244] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input2
1092<7>[ 1.517524] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:426 ix_init
1093<3>[ 1.517527] [TOUCH][F][COMMON] async_touch_init()
1094<3>[ 1.517532] [TOUCH][L][MISC] Touch Module Get. Module index = 0
1095<3>[ 1.517536] [TOUCH][F][MISC] TouchInitializeGpio()
1096<7>[ 1.517833] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:454 ix_probe
1097<4>[ 1.517838] CONFIG_COMPAT enable
1098<7>[ 1.517847] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:975 ix_get_of_pdata
1099<6>[ 1.517862] 6: [INFO] irq : 62 reset : 47
1100<7>[ 1.517984] power on!!
1101<7>[ 1.517990] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:360 ix_regulator_set ix_regulator_set(): power on
1102<6>[ 1.518358] btp spi6.0: [INFO] regulator value : 1800000
1103<3>[ 1.518395] [TOUCH][F][COMMON] touch_probe()
1104<3>[ 1.518405] [TOUCH][L][COMMON] STATE = BOOT
1105<3>[ 1.518411] [TOUCH][L][CONFIG] ======== Model Configuration ( Begin ) ========
1106<3>[ 1.518416] [TOUCH][L][CONFIG] button_support=0
1107<3>[ 1.518421] [TOUCH][L][CONFIG] number_of_button=0
1108<3>[ 1.518426] [TOUCH][L][CONFIG] button_name[0]=0
1109<3>[ 1.518431] [TOUCH][L][CONFIG] button_name[1]=0
1110<3>[ 1.518435] [TOUCH][L][CONFIG] button_name[2]=0
1111<3>[ 1.518440] [TOUCH][L][CONFIG] button_name[3]=0
1112<3>[ 1.518445] [TOUCH][L][CONFIG] max_x=720
1113<3>[ 1.518450] [TOUCH][L][CONFIG] max_y=1280
1114<3>[ 1.518455] [TOUCH][L][CONFIG] max_pressure=255
1115<3>[ 1.518460] [TOUCH][L][CONFIG] max_width=15
1116<3>[ 1.518465] [TOUCH][L][CONFIG] max_orientation=1
1117<3>[ 1.518469] [TOUCH][L][CONFIG] max_id=10
1118<3>[ 1.518474] [TOUCH][L][CONFIG] protocol_type=MT_PROTOCOL_B
1119<3>[ 1.518479] [TOUCH][L][CONFIG] ======== Model Configuration ( End ) ========
1120<3>[ 1.518484] [TOUCH][F][COMMON] register_input_dev()
1121<6>[ 1.518680] input: touch_dev as /devices/virtual/input/input3
1122<3>[ 1.518787] [TOUCH][F][COMMON] sysfs_register()
1123<3>[ 1.519049] [TOUCH][F][MIT300] MIT300_Initialize()
1124<3>[ 1.519057] [TOUCH][L][MIT300] factory boot check : 0
1125<3>[ 1.519063] [TOUCH][F][MIT300] MIT300_ReadIcFirmwareInfo()
1126<3>[ 1.519068] [TOUCH][L][MIT300] ==============Read Firmware Info===========
1127<3>[ 1.519404] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x1a (ok)
1128<3>[ 1.520042] [TOUCH][L][MIT300] F/W Product : PH1_C7
1129<3>[ 1.520318] [TOUCH][L][MIT300] IC Name : T3H0
1130<7>[ 1.520385] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:842 ix_get_hw_id
1131<3>[ 1.520550] [TOUCH][L][MIT300] IC F/W Version = v2.09 ( Official Release )
1132<3>[ 1.520909] [TOUCH][L][MIT300] max_x[720] max_y[1280]
1133<3>[ 1.520916] [TOUCH][L][MIT300] col_num[18] row_num[32] key_num[0]
1134<6>[ 1.520918] btp spi6.0: [INFO] ***************************************************
1135<6>[ 1.520924] btp spi6.0: [INFO] * Chip ID[0x52] * Revision Number[0x10] * Count[1]
1136<6>[ 1.520929] btp spi6.0: [INFO] ***************************************************
1137<3>[ 1.521277] [TOUCH][L][MIT300] event_format[1] event_size[8]
1138<3>[ 1.521283] [TOUCH][L][MIT300] ===========================================
1139<3>[ 1.521289] [TOUCH][F][MIT300] MIT300_GetBinFirmwareInfo()
1140<3>[ 1.521295] [TOUCH][L][MIT300] Firmware filename = melfas/mit300/ph2/melfas_mip4_cut7.bin
1141<3>[ 1.521307] [TOUCH][L][MIT300] BIN F/W Version = v2.09 ( Official Release )
1142<3>[ 1.521313] [TOUCH][F][MISC] TouchRegisterIrq()
1143<3>[ 1.521509] [TOUCH][L][MISC] Interrupt Disabled
1144<3>[ 1.521515] [TOUCH][L][COMMON] STATE = NORMAL
1145<3>[ 1.521525] [TOUCH][L][MISC] Interrupt Enabled
1146<6>[ 1.521544] btp spi6.0: [INFO] interrupt wait count [1]
1147<7>[ 1.521550] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:791 ix_reset
1148<3>[ 1.521556] [TOUCH][L][MISC] Interrupt Disabled
1149<3>[ 1.521564] [TOUCH][L][COMMON] STATE = NORMAL
1150<3>[ 1.521570] [TOUCH][L][COMMON] Finish async_touch_init
1151<3>[ 1.521574] [TOUCH][L][MISC] Interrupt Enabled
1152<7>[ 1.521663] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:817 ix_init_param
1153<6>[ 1.531566] btp spi6.0: [INFO] Interrupt test OK
1154<7>[ 1.531571] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:791 ix_reset
1155<7>[ 1.531680] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:817 ix_init_param
1156<6>[ 1.540384] input: fingerprint as /devices/virtual/input/lge_fingerprint
1157<7>[ 1.540489] 7: [DEBUG] ../../../../../../kernel/lge/msm8937/drivers/input/fingerprint/ix_btp_tee.c:432 ix_init ok
1158<6>[ 1.540596] qcom,qpnp-rtc qpnp-rtc-7: setting system clock to 1970-01-02 18:08:19 UTC (151699)
1159<6>[ 1.543916] [BOOT_CAUSE] 131105, warm_reset = 1
1160<6>[ 1.543922] [SMPL_CNT] ===> not smpl boot!!!!!
1161<3>[ 1.546345] parse_cpu_levels: idx 1 900
1162<3>[ 1.546529] calculate_residency: residency < 0 for LPM
1163<3>[ 1.546534] parse_cpu_levels: idx 1 400
1164<3>[ 1.550317] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
1165<3>[ 1.550368] usb-type-c-pericom 2-001d: i2c write to [1d] failed -107
1166<3>[ 1.550377] usb-type-c-pericom 2-001d: i2c access failed
1167<6>[ 1.550604] SMBCHG: power_ok_handler: triggered: 0x00
1168<6>[ 1.550636] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1169<3>[ 1.550867] qcom,qpnp-flash-led qpnp-flash-led-24: Unable to acquire pinctrl
1170<6>[ 1.551914] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS 4873 mV
1171<6>[ 1.551940] SMBCHG: usbin_uv_handler: usb_type[SDP]
1172<6>[ 1.551954] SMBCHG: increment_uv_irq_count: uv_irq_count[3]
1173<6>[ 1.551960] SMBCHG: usbin_uv_handler: setting usb psy health UNSPEC_FAILURE
1174<6>[ 1.552019] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1175<6>[ 1.552045] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1176<6>[ 1.552055] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1177<6>[ 1.552158] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1178<6>[ 1.552389] FG: fg_age_detection: battery age not init
1179<6>[ 1.552415] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19277330, ocv=-22, ibat=85428, rbatt=99978
1180<6>[ 1.557159] qcom,cc-debug-8952 1874000.qcom,cc-debug: Registered Debug Mux successfully
1181<6>[ 1.564017] msm8952-asoc-wcd c051000.sound: default codec configured
1182<3>[ 1.568349] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
1183<3>[ 1.568398] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
1184<6>[ 1.569430] adv_vreg: disabling
1185<6>[ 1.569438] mem_acc_corner: disabling
1186<6>[ 1.569475] clock_late_init: Removing enables held for handed-off clocks
1187<6>[ 1.571049] SMBCHG: power_ok_handler: triggered: 0x01
1188<6>[ 1.571088] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1189<6>[ 1.571918] ALSA device list:
1190<6>[ 1.571923] No soundcards found.
1191<3>[ 1.572005] Warning: unable to open an initial console.
1192<6>[ 1.572226] Freeing unused kernel memory: 492K (ffffffc00165e000 - ffffffc0016d9000)
1193<6>[ 1.572262] Freeing alternatives memory: 80K (ffffffc0016d9000 - ffffffc0016ed000)
1194<13>[ 1.573905] init: init started!
1195<7>[ 1.579953] SELinux: 2048 avtab hash slots, 4752 rules.
1196<6>[ 1.580106] SELinux: Android master kernel running Android M policy in compatibility mode.
1197<7>[ 1.583367] SELinux: 2048 avtab hash slots, 4752 rules.
1198<7>[ 1.583388] SELinux: 1 users, 2 roles, 518 types, 0 bools, 1 sens, 1024 cats
1199<7>[ 1.583397] SELinux: 87 classes, 4752 rules
1200<6>[ 1.584585] SELinux: Permission module_load in class system not defined in policy.
1201<6>[ 1.584890] SELinux: Permission audit_read in class capability2 not defined in policy.
1202<6>[ 1.584906] SELinux: Class can_socket not defined in policy.
1203<6>[ 1.584910] SELinux: the above unknown classes and permissions will be denied
1204<7>[ 1.584940] SELinux: Completing initialization.
1205<7>[ 1.584944] SELinux: Setting up existing superblocks.
1206<7>[ 1.584959] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1207<7>[ 1.584982] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
1208<7>[ 1.585540] SELinux: initialized (dev bdev, type bdev), not configured for labeling
1209<7>[ 1.585554] SELinux: initialized (dev proc, type proc), uses genfs_contexts
1210<7>[ 1.585577] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
1211<3>[ 1.590470] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
1212<3>[ 1.590526] usb-type-c-pericom 2-001d: i2c write to [1d] failed -107
1213<3>[ 1.590534] usb-type-c-pericom 2-001d: i2c access failed
1214<6>[ 1.599430] msm8952-asoc-wcd c051000.sound: default codec configured
1215<3>[ 1.604440] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
1216<3>[ 1.604501] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
1217<6>[ 1.606835] SMBCHG: power_ok_handler: triggered: 0x00
1218<6>[ 1.606866] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1219<6>[ 1.608152] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS 4875 mV
1220<6>[ 1.608178] SMBCHG: usbin_uv_handler: usb_type[SDP]
1221<6>[ 1.608192] SMBCHG: increment_uv_irq_count: uv_irq_count[4]
1222<6>[ 1.608198] SMBCHG: usbin_uv_handler: setting usb psy health UNSPEC_FAILURE
1223<6>[ 1.608256] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1224<6>[ 1.608283] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1225<6>[ 1.608292] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1226<6>[ 1.608389] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1227<6>[ 1.608630] FG: fg_age_detection: battery age not init
1228<6>[ 1.608661] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19468594, ocv=-22, ibat=393918, rbatt=99978
1229<7>[ 1.620884] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
1230<7>[ 1.620900] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
1231<7>[ 1.620912] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
1232<7>[ 1.620921] SELinux: initialized (dev aio, type aio), not configured for labeling
1233<7>[ 1.620934] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
1234<7>[ 1.620957] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
1235<7>[ 1.620974] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
1236<7>[ 1.621048] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1237<7>[ 1.621076] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
1238<6>[ 1.627267] SMBCHG: power_ok_handler: triggered: 0x01
1239<6>[ 1.627300] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1240<3>[ 1.640352] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
1241<3>[ 1.640393] usb-type-c-pericom 2-001d: i2c write to [1d] failed -107
1242<3>[ 1.640399] usb-type-c-pericom 2-001d: i2c access failed
1243<6>[ 1.650278] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1244<6>[ 1.650305] SMBCHG: power_ok_handler: triggered: 0x00
1245<6>[ 1.651563] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS 4870 mV
1246<6>[ 1.651588] SMBCHG: usbin_uv_handler: usb_type[SDP]
1247<6>[ 1.651602] SMBCHG: increment_uv_irq_count: uv_irq_count[5]
1248<6>[ 1.651608] SMBCHG: usbin_uv_handler: setting usb psy health UNSPEC_FAILURE
1249<6>[ 1.651645] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1250<6>[ 1.651672] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1251<6>[ 1.651679] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1252<6>[ 1.651756] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1253<6>[ 1.651991] FG: fg_age_detection: battery age not init
1254<6>[ 1.652014] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19468594, ocv=-22, ibat=393918, rbatt=99978
1255<6>[ 1.670723] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1256<6>[ 1.670741] SMBCHG: power_ok_handler: triggered: 0x01
1257<5>[ 1.678407] audit: type=1403 audit(151699.619:2): policy loaded auid=4294967295 ses=4294967295
1258<13>[ 1.678878] init: (Initializing SELinux non-enforcing took 0.10s.)
1259<13>[ 1.684061] init: init second stage started!
1260<6>[ 1.693715] SMBCHG: power_ok_handler: triggered: 0x00
1261<6>[ 1.693747] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1262<6>[ 1.695022] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS 4877 mV
1263<6>[ 1.695046] SMBCHG: usbin_uv_handler: usb_type[SDP]
1264<6>[ 1.695061] SMBCHG: increment_uv_irq_count: uv_irq_count[6]
1265<6>[ 1.695066] SMBCHG: usbin_uv_handler: setting usb psy health UNSPEC_FAILURE
1266<6>[ 1.695102] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1267<6>[ 1.695128] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1268<6>[ 1.695136] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1269<6>[ 1.695211] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1270<6>[ 1.695444] FG: fg_age_detection: battery age not init
1271<6>[ 1.695467] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19304654, ocv=-22, ibat=129498, rbatt=99978
1272<6>[ 1.714172] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1273<6>[ 1.714190] SMBCHG: power_ok_handler: triggered: 0x01
1274<6>[ 1.737167] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1275<6>[ 1.737194] SMBCHG: power_ok_handler: triggered: 0x00
1276<6>[ 1.738450] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS 4873 mV
1277<6>[ 1.738474] SMBCHG: usbin_uv_handler: usb_type[SDP]
1278<6>[ 1.738489] SMBCHG: increment_uv_irq_count: uv_irq_count[7]
1279<6>[ 1.738495] SMBCHG: usbin_uv_handler: setting usb psy health UNSPEC_FAILURE
1280<6>[ 1.738530] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1281<6>[ 1.738557] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1282<6>[ 1.738564] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1283<6>[ 1.738638] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1284<6>[ 1.738869] FG: fg_age_detection: battery age not init
1285<6>[ 1.738893] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19304654, ocv=-22, ibat=129498, rbatt=99978
1286<11>[ 1.751289] init: waitpid failed: No child processes
1287<13>[ 1.751626] init: (Loading properties from /default.prop took 0.00s.)
1288<11>[ 1.752164] init: /init.rc: 13: invalid command 'setcon'
1289<11>[ 1.752223] init: /init.rc: 61: invalid command 'load_all_props'
1290<11>[ 1.752314] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
1291<13>[ 1.752454] init: (Parsing /init.recovery.usb.rc took 0.00s.)
1292<13>[ 1.752515] init: (Parsing /init.recovery.service.rc took 0.00s.)
1293<11>[ 1.752548] init: could not import file '/init.recovery.vold_decrypt.rc' from '/init.rc'
1294<11>[ 1.752578] init: could not import file '/init.recovery.ph2n.rc' from '/init.rc'
1295<13>[ 1.752594] init: (Parsing /init.rc took 0.00s.)
1296<5>[ 1.752703] audit: type=1400 audit(151699.699:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
1297<11>[ 1.752775] init: SELinux: Could not get canonical path /postinstall restorecon: No such file or directory.
1298<13>[ 1.752826] init: Starting service 'ueventd'...
1299<13>[ 1.753215] init: Waiting for /dev/.coldboot_done...
1300<13>[ 1.755292] ueventd: ueventd started!
1301<6>[ 1.757608] SMBCHG: power_ok_handler: triggered: 0x01
1302<6>[ 1.757642] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1303<6>[ 1.780603] SMBCHG: power_ok_handler: triggered: 0x00
1304<6>[ 1.780638] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1305<6>[ 1.781926] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS 4866 mV
1306<6>[ 1.781952] SMBCHG: usbin_uv_handler: usb_type[SDP]
1307<6>[ 1.781967] SMBCHG: increment_uv_irq_count: uv_irq_count[8]
1308<6>[ 1.781973] SMBCHG: usbin_uv_handler: setting usb psy health UNSPEC_FAILURE
1309<6>[ 1.782029] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1310<6>[ 1.782056] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1311<6>[ 1.782066] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1312<6>[ 1.782170] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1313<6>[ 1.782412] FG: fg_age_detection: battery age not init
1314<6>[ 1.782439] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19304654, ocv=-22, ibat=129498, rbatt=99978
1315<6>[ 1.801062] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1316<6>[ 1.801079] SMBCHG: power_ok_handler: triggered: 0x01
1317<6>[ 1.824060] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1318<6>[ 1.824087] SMBCHG: power_ok_handler: triggered: 0x00
1319<6>[ 1.825346] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS 4881 mV
1320<6>[ 1.825371] SMBCHG: usbin_uv_handler: usb_type[SDP]
1321<6>[ 1.825386] SMBCHG: increment_uv_irq_count: uv_irq_count[9]
1322<6>[ 1.825391] SMBCHG: usbin_uv_handler: setting usb psy health UNSPEC_FAILURE
1323<6>[ 1.825430] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1324<6>[ 1.825456] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1325<6>[ 1.825463] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1326<6>[ 1.825554] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1327<6>[ 1.825790] FG: fg_age_detection: battery age not init
1328<6>[ 1.825815] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19468594, ocv=-22, ibat=393918, rbatt=99978
1329<6>[ 1.844507] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1330<6>[ 1.844523] SMBCHG: power_ok_handler: triggered: 0x01
1331<6>[ 1.867501] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x05 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1332<6>[ 1.867528] SMBCHG: power_ok_handler: triggered: 0x00
1333<6>[ 1.868785] SMBCHG: usbin_uv_handler: Very weak charger detected. VBUS 4873 mV
1334<6>[ 1.868810] SMBCHG: usbin_uv_handler: usb_type[SDP]
1335<6>[ 1.868824] SMBCHG: increment_uv_irq_count: uv_irq_count[10]
1336<6>[ 1.868840] SMBCHG: usbin_uv_handler: setting usb psy health UNSPEC_FAILURE
1337<6>[ 1.868871] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1338<6>[ 1.868897] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 100
1339<6>[ 1.868904] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
1340<6>[ 1.868965] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 150 mA
1341<6>[ 1.868982] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1342<6>[ 1.869070] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1343<6>[ 1.869304] FG: fg_age_detection: battery age not init
1344<6>[ 1.869327] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19468594, ocv=-22, ibat=393918, rbatt=99978
1345<6>[ 1.887949] SMBCHG: usbin_uv_handler: chip->usb_present = 1 rt_sts = 0x04 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1346<6>[ 1.887966] SMBCHG: power_ok_handler: triggered: 0x01
1347<6>[ 1.922210] FG: fg_age_detection: battery age not init
1348<6>[ 1.922287] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19468594, ocv=-22, ibat=393918, rbatt=99978
1349<3>[ 1.930072] msm_otg 78db000.usb: unable to get qpnp adc for otg
1350<6>[ 1.931926] FG: fg_age_detection: battery age not init
1351<6>[ 2.070049] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1352<13>[ 2.210842] ueventd: Coldboot took 0.45s.
1353<13>[ 2.217125] init: Waiting for /dev/.coldboot_done took 0.46s.
1354<7>[ 2.218852] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1355<7>[ 2.219788] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
1356<7>[ 2.220731] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
1357<6>[ 2.220868] android_usb android0: gadget enable(0)
1358<3>[ 2.220880] enable_store: android_usb: already disabled
1359<6>[ 2.221181] android_usb android0: LGE-USB request function list: adb
1360<13>[ 2.221468] init: (Loading properties from /system/build.prop took 0.00s.)
1361<13>[ 2.221508] init: (Loading properties from /vendor/build.prop took 0.00s.)
1362<13>[ 2.221546] init: (Loading properties from /factory/factory.prop took 0.00s.)
1363<11>[ 2.221599] fs_mgr: Cannot open file /fstab.ph2n
1364<11>[ 2.221618] init: unable to read fstab /fstab.ph2n: No such file or directory
1365<13>[ 2.221669] init: (Loading properties from /data/local.prop took 0.00s.)
1366<11>[ 2.221706] init: Unable to open persistent property directory "/data/property": No such file or directory
1367<13>[ 2.222392] init: Starting service 'set_permissive'...
1368<13>[ 2.222745] init: Starting service 'recovery'...
1369<6>[ 2.223150] android_usb android0: gadget enable(0)
1370<13>[ 2.223219] init: Starting service 'adbd'...
1371<6>[ 2.223579] android_usb android0: gadget enable(1)
1372<6>[ 2.223596] ffs_function_enable: ffs_function_enable: config->opened(0)
1373<6>[ 2.223602] android_disable: android_disable: checked disable_depth(1)
1374<6>[ 2.223610] android_enable: android_enable: checked disable_depth(2)
1375<6>[ 2.227147] read descriptors
1376<6>[ 2.227162] read strings
1377<6>[ 2.227193] functionfs_ready_callback: functionfs_ready_callback: config->enabled(1), dev(ffffffc077d8fc00)
1378<6>[ 2.227200] android_enable: android_enable: checked disable_depth(1)
1379<6>[ 2.227265] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
1380<5>[ 2.242020] audit: type=1400 audit(151700.189:4): avc: denied { write } for pid=369 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
1381<13>[ 2.243221] init: Service 'set_permissive' (pid 363) exited with status 0
1382<6>[ 2.260781] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=4095
1383<11>[ 2.261477] init: avc: denied { set } for property=twrp.crash_counter scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
1384<6>[ 2.262453] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=4095
1385<6>[ 2.263154] mdss_fb_blank_sub: mdss_fb_open+0x138/0x1cc mode:0
1386<6>[ 2.263360] mdss_fb_blank_sub: -
1387<3>[ 2.270295] [TOUCH][D][COMMON] [IN] LCD Sleep
1388<3>[ 2.270302] [TOUCH][E][COMMON] DecideNextDriverState() line=748 : Invalid Mode Setting ( mode = -1 )
1389<3>[ 2.270304] [TOUCH][F][MIT300] MIT300_SetLpwgMode()
1390<3>[ 2.270306] [TOUCH][F][MIT300] lpwg_control()
1391<3>[ 2.271452] [TOUCH][L][MIT300] SET Active Area X1 = 60, Y1 = 60, X2 = 660, Y2 = 1220
1392<3>[ 2.272433] [TOUCH][L][MISC] Interrupt Enabled
1393<3>[ 2.272435] [TOUCH][L][MIT300] device was set to KNOCK_ON_CODE
1394<3>[ 2.272438] [TOUCH][L][COMMON] STATE = KNOCK_ON_CODE
1395<6>[ 2.272449] mdss_fb_blank_sub: mdss_fb_blank+0xd4/0xe4 mode:4
1396<6>[ 2.272557] mdss_fb_blank_sub: -
1397<6>[ 2.272587] mdss_fb_blank_sub: mdss_fb_blank+0xd4/0xe4 mode:0
1398<6>[ 2.272724] mdss_fb_blank_sub: -
1399<3>[ 2.272727] [TOUCH][D][COMMON] [OUT] LCD Sleep
1400<3>[ 2.272729] [TOUCH][F][MIT300] MIT300_SetLpwgMode()
1401<3>[ 2.272730] [TOUCH][F][MIT300] lpwg_control()
1402<3>[ 2.272732] [TOUCH][L][MIT300] device was set to NORMAL
1403<3>[ 2.272733] [TOUCH][L][COMMON] STATE = NORMAL
1404<3>[ 2.272766] [TOUCH][L][MISC] Interrupt Disabled
1405<3>[ 2.272775] [TOUCH][L][COMMON] STATE = NORMAL
1406<3>[ 2.272787] [TOUCH][L][MISC] Interrupt Enabled
1407<3>[ 2.293765] [TOUCH][D][COMMON] [IN] LCD Sleep
1408<3>[ 2.293776] [TOUCH][E][COMMON] DecideNextDriverState() line=748 : Invalid Mode Setting ( mode = -1 )
1409<3>[ 2.293778] [TOUCH][F][MIT300] MIT300_SetLpwgMode()
1410<3>[ 2.293779] [TOUCH][F][MIT300] lpwg_control()
1411<3>[ 2.294164] [TOUCH][L][MIT300] SET Active Area X1 = 60, Y1 = 60, X2 = 660, Y2 = 1220
1412<3>[ 2.295144] [TOUCH][L][MISC] Interrupt Enabled
1413<3>[ 2.295145] [TOUCH][L][MIT300] device was set to KNOCK_ON_CODE
1414<3>[ 2.295147] [TOUCH][L][COMMON] STATE = KNOCK_ON_CODE
1415<6>[ 2.295153] mdss_fb_blank_sub: mdss_fb_blank+0xd4/0xe4 mode:4
1416<6>[ 2.310874] lge_set_display_power_ctrl: display_power_ctrl [0]
1417<6>[ 2.310884] mdss_dsi_panel_off: ctrl=ffffffc078d5c018 ndx=0
1418<6>[ 2.406811] setting usb power supply type 4
1419<6>[ 2.406873] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1420<6>[ 2.406898] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 100
1421<6>[ 2.406904] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1422<6>[ 2.407000] android_work: android_work: did not send uevent (0 0 0000000000000000)
1423<6>[ 2.407015] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1424<6>[ 2.407239] FG: fg_age_detection: battery age not init
1425<6>[ 2.407260] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19250007, ocv=-22, ibat=41358, rbatt=99978
1426<6>[ 2.477284] android_work: android_work: sent uevent USB_STATE=CONNECTED
1427<6>[ 2.480811] setting usb power supply type 4
1428<6>[ 2.480853] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1429<6>[ 2.480875] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 100
1430<6>[ 2.480879] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1431<6>[ 2.480983] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1432<6>[ 2.481015] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1433<6>[ 2.481286] FG: fg_age_detection: battery age not init
1434<6>[ 2.481305] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19250007, ocv=-22, ibat=41358, rbatt=99978
1435<6>[ 2.569233] android_work: android_work: sent uevent USB_STATE=CONNECTED
1436<6>[ 2.570385] android_usb gadget: high-speed config #1: 86000c8.android_usb
1437<6>[ 2.570414] setting usb power supply type 4
1438<6>[ 2.570477] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1439<6>[ 2.570498] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 100
1440<6>[ 2.570501] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1441<6>[ 2.570647] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1442<6>[ 2.570860] FG: fg_age_detection: battery age not init
1443<6>[ 2.570878] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19222683, ocv=-22, ibat=-2712, rbatt=99978
1444<6>[ 2.596558] FG: fg_backup_sram_registers: Backing SRAM registers
1445<6>[ 2.601274] FG: update_sram_data: last_soc: 167 last_cc_soc: 175798905
1446<6>[ 2.601307] FG: update_sram_data: soc:[50], soc_raw[6476], voltage:[3914009], ocv:[3977485], current:[231016], batt_temp:[200], charge_raw [0 / 0]
1447<6>[ 2.601695] FG: update_temp_data: batt temp was changed !! 0 => 283
1448<6>[ 2.601765] FG: delayed_init_work: FG: HW_init success
1449<6>[ 2.601867] FG: set_prop_enable_charging: disabling charging
1450<6>[ 2.602244] FG: slope_limiter_work: Slope limit sts: 3 val: 6000000 buf[0 8a] written
1451<6>[ 2.607184] FG: fg_backup_sram_registers: Backing SRAM registers
1452<6>[ 2.611929] FG: update_sram_data: last_soc: 167 last_cc_soc: 175798905
1453<6>[ 2.611956] FG: update_sram_data: soc:[50], soc_raw[6476], voltage:[3914009], ocv:[3977485], current:[231016], batt_temp:[283], charge_raw [0 / 0]
1454<6>[ 2.630062] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1455<6>[ 2.788197] mdss_dsi_panel_off:-
1456<6>[ 2.826559] mdss_dsi_panel_reset: + enable = 0 (override: ph2n_tmo_us)
1457<6>[ 2.826562] mdss_dsi_panel_reset: -
1458<6>[ 2.828284] mdss_fb_blank_sub: -
1459<6>[ 2.828481] mdss_fb_blank_sub: mdss_fb_blank+0xd4/0xe4 mode:0
1460<6>[ 2.837931] mdss_dsi_panel_reset: + enable = 1 (override: ph2n_tmo_us)
1461<6>[ 2.837933] [LCD] Start LCD reset pin down when LCD on
1462<3>[ 2.837943] [TOUCH][L][MISC] Interrupt Disabled
1463<3>[ 2.837947] [TOUCH][L][MISC] Reset Pin was set to LOW
1464<3>[ 2.845004] [TOUCH][L][MISC] Reset Pin was set to HIGH
1465<3>[ 2.900074] [TOUCH][L][MISC] Interrupt Enabled
1466<3>[ 2.900295] [TOUCH][L][MIT300] MIT300_Set_CoverMode status=0
1467<6>[ 2.900298] mdss_dsi_panel_reset: -
1468<6>[ 2.900314] mdss_dsi_panel_on: ndx=0 cmd_cnt=34
1469<6>[ 3.070042] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1470<6>[ 3.131994] lge_mdss_dsi_panel_send_on_cmds: reader_mode (0).
1471<6>[ 3.132517] mdss_fb_blank_sub: -
1472<3>[ 3.132521] [TOUCH][D][COMMON] [OUT] LCD Sleep
1473<3>[ 3.132524] [TOUCH][F][MIT300] MIT300_SetLpwgMode()
1474<3>[ 3.132526] [TOUCH][F][MIT300] lpwg_control()
1475<3>[ 3.132528] [TOUCH][L][MIT300] device was set to NORMAL
1476<3>[ 3.132530] [TOUCH][L][COMMON] STATE = NORMAL
1477<3>[ 3.132547] [TOUCH][L][MISC] Interrupt Disabled
1478<3>[ 3.132550] [TOUCH][L][COMMON] STATE = NORMAL
1479<3>[ 3.132558] [TOUCH][L][MISC] Interrupt Enabled
1480<6>[ 3.132798] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=4095
1481<3>[ 3.200112] gpio_keys_gpio_report_event: code(222) state(0)
1482<3>[ 3.200123] gpio_keys_gpio_report_event: code(222) state(0)
1483<6>[ 3.200128] stylus_pen state = 0
1484<3>[ 3.200147] gpio_keys_gpio_report_event: code(115) state(0)
1485<5>[ 3.200271] audit: type=1400 audit(151701.149:5): avc: denied { write } for pid=364 comm="recovery" name="etc" dev="rootfs" ino=11333 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1486<5>[ 3.200299] audit: type=1400 audit(151701.149:6): avc: denied { add_name } for pid=364 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1487<5>[ 3.200335] audit: type=1400 audit(151701.149:7): avc: denied { create } for pid=364 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
1488<5>[ 3.200422] audit: type=1400 audit(151701.149:8): avc: denied { remove_name } for pid=364 comm="recovery" name="recovery.fstab" dev="rootfs" ino=11335 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1489<5>[ 3.200447] audit: type=1400 audit(151701.149:9): avc: denied { rename } for pid=364 comm="recovery" name="recovery.fstab" dev="rootfs" ino=11335 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1490<5>[ 3.201305] audit: type=1400 audit(151701.149:10): avc: denied { create } for pid=364 comm="recovery" name="firmware" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1491<6>[ 3.218593] EXT4-fs (mmcblk0p65): mounted filesystem with ordered data mode. Opts:
1492<7>[ 3.218619] SELinux: initialized (dev mmcblk0p65, type ext4), uses xattr
1493<6>[ 3.260748] EXT4-fs (mmcblk0p65): mounted filesystem with ordered data mode. Opts:
1494<7>[ 3.260774] SELinux: initialized (dev mmcblk0p65, type ext4), uses xattr
1495<6>[ 3.302192] EXT4-fs (mmcblk0p65): mounted filesystem with ordered data mode. Opts:
1496<7>[ 3.302216] SELinux: initialized (dev mmcblk0p65, type ext4), uses xattr
1497<6>[ 3.343649] EXT4-fs (mmcblk0p65): mounted filesystem with ordered data mode. Opts:
1498<7>[ 3.343672] SELinux: initialized (dev mmcblk0p65, type ext4), uses xattr
1499<6>[ 3.382747] EXT4-fs (mmcblk0p63): mounted filesystem with ordered data mode. Opts:
1500<7>[ 3.382771] SELinux: initialized (dev mmcblk0p63, type ext4), uses xattr
1501<6>[ 3.384021] SELinux: Context u:object_r:cache_recovery_file:s0 is not valid (left unmapped).
1502<6>[ 3.399448] EXT4-fs (mmcblk0p62): mounted filesystem with ordered data mode. Opts:
1503<7>[ 3.399470] SELinux: initialized (dev mmcblk0p62, type ext4), uses xattr
1504<6>[ 3.404419] SELinux: Context u:object_r:recovery_data_file:s0 is not valid (left unmapped).
1505<6>[ 3.406318] SELinux: Context u:object_r:bluetooth_logs_data_file:s0 is not valid (left unmapped).
1506<6>[ 3.409989] SELinux: Context u:object_r:textclassifier_data_file:s0 is not valid (left unmapped).
1507<6>[ 3.412585] SELinux: Context u:object_r:hostapd_socket:s0 is not valid (left unmapped).
1508<6>[ 3.414304] SELinux: Context u:object_r:audioserver_data_file:s0 is not valid (left unmapped).
1509<6>[ 3.414598] SELinux: Context u:object_r:boottrace_data_file:s0 is not valid (left unmapped).
1510<6>[ 3.415084] SELinux: Context u:object_r:update_engine_data_file:s0 is not valid (left unmapped).
1511<6>[ 3.415464] SELinux: Context u:object_r:method_trace_data_file:s0 is not valid (left unmapped).
1512<6>[ 3.415931] SELinux: Context u:object_r:reboot_data_file:s0 is not valid (left unmapped).
1513<6>[ 3.416264] SELinux: Context u:object_r:user_profile_data_file:s0 is not valid (left unmapped).
1514<6>[ 3.417341] SELinux: Context u:object_r:profman_dump_data_file:s0 is not valid (left unmapped).
1515<6>[ 3.424915] SELinux: Context u:object_r:bootstat_data_file:s0 is not valid (left unmapped).
1516<6>[ 3.457326] SELinux: Context u:object_r:ota_data_file:s0 is not valid (left unmapped).
1517<6>[ 3.457996] SELinux: Context u:object_r:ota_package_file:s0 is not valid (left unmapped).
1518<6>[ 3.471819] SELinux: Context u:object_r:cache_private_backup_file:s0 is not valid (left unmapped).
1519<7>[ 3.489432] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
1520<6>[ 3.500789] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts:
1521<7>[ 3.500812] SELinux: initialized (dev mmcblk0p33, type ext4), uses xattr
1522<6>[ 3.600076] FG: check_sanity_work: vbatt 3914, count 1
1523<6>[ 4.070056] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1524<6>[ 4.600180] FG: fg_batt_profile_init: battery id = 99306
1525<6>[ 4.600196] FG: update_battery_type: [FG_EST]:battery_id : 204
1526<6>[ 4.600202] FG: update_battery_type: [FG_EST]:use battery type : LGE_BL45B1F_Tocad_3000mAh
1527<6>[ 4.600219] of_batterydata_get_best_profile: LGE_BL45B1F_Tocad_3000mAh found
1528<6>[ 4.605295] FG: fg_batt_profile_init: [FG_EST]:vbat_est_diff=4273,v_current_pred=3909736,v=3914009
1529<6>[ 4.605724] FG: fg_cap_learning_load_data: learned capacity 0-> 2944000/b80 uah
1530<6>[ 4.605778] FG: fg_batt_profile_init: [FG_EST]:Battery profiles same, same battery
1531<6>[ 4.605787] FG: set_prop_enable_charging: enabling charging
1532<6>[ 4.605803] FG: update_chg_iterm: current = -100, converted_raw = fd71, data = 71 fd
1533<6>[ 4.606545] FG: update_cc_cv_setpoint: Wrote 62 70 to address 4f8 for CC_CV setpoint
1534<6>[ 4.607665] FG: populate_system_data: coeffs1 = 3916015 -1088867 2355468 -808593
1535<6>[ 4.607710] FG: populate_system_data: coeffs2 = 3687500 -592285 6054687 -10242187
1536<6>[ 4.607716] FG: populate_system_data: coeffs3 = 3015625 21234375 -228125000 820000000
1537<6>[ 4.609748] FG: fg_calc_and_store_cc_soc_coeff: new cc_soc_coeff 5689198 [b0 89] saved to sram
1538<6>[ 4.610183] FG: populate_system_data: cutoff_voltage = 3199901, nom_cap_uah = 2944000 p1p2 = 32, p2p3 = 9
1539<6>[ 4.610268] FG: check_update_soc_lge_5level: [FG_DELTA]:SOC_Raw=0xA7,SOC_Origin=65,SOC_Scale_raw=6935,SOC_scale=69,SOC_5LEVEL_Raw=6945,SOC_5LEVEL=69,Voltage=3914,OCV=3977,current=231,temp=28
1540<6>[ 4.610279] FG: fg_batt_profile_init: soc:[69], voltage:[3914009], ocv:[3977485], current:[231016], batt_temp:[283],cycle_count : [0], residence : [195678]
1541<6>[ 4.610286] FG: fg_batt_profile_init: [FG_OPTION]first_soc_est_done flag true
1542<6>[ 4.610788] of_batterydata_get_best_profile: LGE_BL45B1F_Tocad_3000mAh found
1543<6>[ 4.610820] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 100
1544<6>[ 4.610829] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1545<6>[ 4.611303] FG: fg_config_esr_extract: ESR extract already enabled
1546<6>[ 4.611521] SMBCHG: get_prop_charge_type: chg_wake_locked
1547<6>[ 4.611573] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1548<6>[ 4.612118] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled
1549<6>[ 4.613619] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1623070, ocv=3977485, ibat=349848, rbatt=295678
1550<6>[ 4.616250] FG: fg_backup_sram_registers: Backing SRAM registers
1551<5>[ 4.620496] random: nonblocking pool is initialized
1552<6>[ 4.620931] FG: update_sram_data: last_soc: 167 last_cc_soc: 175798905
1553<6>[ 4.620978] FG: update_sram_data: soc:[69], soc_raw[6476], voltage:[3889900], ocv:[3977485], current:[378415], batt_temp:[283], charge_raw [1796582 / 2944000]
1554<6>[ 4.707637] SMBCHG: fastchg_handler: p2f triggered
1555<6>[ 4.707685] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1556<6>[ 4.708065] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1638387, ocv=3977485, ibat=349848, rbatt=293237
1557<6>[ 4.708231] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1558<6>[ 4.708372] FG: fg_config_esr_extract: ESR extract already enabled
1559<6>[ 4.708380] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
1560<6>[ 4.708839] FG: fg_cap_learning_check: checking battery soc (64 vs 15)
1561<6>[ 4.708847] FG: fg_cap_learning_check: battery soc too high (64 > 15), aborting
1562<6>[ 4.709413] FG: discharge_gain_work: Capacity: 69, medc_gain: 3 highc_gain: 2
1563<6>[ 4.710080] FG: discharge_gain_work: Value [0 82] written to ki_coeff_medc
1564<6>[ 4.710401] FG: discharge_gain_work: Value [0 80] written to ki_coeff_highc
1565<6>[ 4.710732] FG: update_cycle_count: batt_soc: a5 bucket: 5
1566<6>[ 4.711131] FG: slope_limiter_work: Slope limit sts: 1 val: 6000000 buf[0 8a] written
1567<6>[ 4.759671] mdss_fb_set_bl_brightness: value=137 -> bl_lvl=948
1568<11>[ 4.763880] init: avc: denied { set } for property=sys.usb.config scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service
1569<6>[ 4.764037] android_usb android0: gadget enable(0)
1570<6>[ 4.764047] android_disable: android_disable: checked disable_depth(0)
1571<6>[ 4.764106] ffs_function_disable: ffs_function_disable: config->opened(1)
1572<6>[ 4.764292] functionfs_closed_callback: functionfs_closed_callback: config->enabled(0), dev(ffffffc077d8fc00)
1573<6>[ 4.764381] android_usb android0: gadget enable(0)
1574<6>[ 4.764464] android_usb android0: LGE-USB request function list: mtp,adb
1575<6>[ 4.764543] android_usb android0: gadget enable(1)
1576<6>[ 4.764553] ffs_function_enable: ffs_function_enable: config->opened(0)
1577<6>[ 4.764560] android_disable: android_disable: checked disable_depth(1)
1578<6>[ 4.764566] android_enable: android_enable: checked disable_depth(2)
1579<6>[ 4.764578] read descriptors
1580<6>[ 4.764591] read strings
1581<6>[ 4.764623] functionfs_ready_callback: functionfs_ready_callback: config->enabled(1), dev(ffffffc077d8fc00)
1582<6>[ 4.764629] android_enable: android_enable: checked disable_depth(1)
1583<6>[ 4.764635] mtp_bind_config
1584<6>[ 4.783122] EXT4-fs (mmcblk0p62): mounted filesystem with ordered data mode. Opts:
1585<7>[ 4.783150] SELinux: initialized (dev mmcblk0p62, type ext4), uses xattr
1586<6>[ 4.800123] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
1587<6>[ 4.803177] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
1588<6>[ 4.803206] android_work: android_work: did not send uevent (1 1 0000000000000000)
1589<6>[ 4.946724] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
1590<6>[ 4.946748] setting usb power supply type 4
1591<6>[ 4.946861] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1592<6>[ 4.946929] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 100
1593<6>[ 4.946938] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1594<6>[ 4.947031] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1595<6>[ 4.947327] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1720357, ocv=3977485, ibat=217638, rbatt=293237
1596<6>[ 5.017277] android_work: android_work: sent uevent USB_STATE=CONNECTED
1597<6>[ 5.020873] setting usb power supply type 4
1598<6>[ 5.020943] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 100
1599<6>[ 5.020949] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1600<6>[ 5.021053] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1601<6>[ 5.021069] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1602<6>[ 5.021327] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1720357, ocv=3977485, ibat=217638, rbatt=293237
1603<6>[ 5.070042] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1604<6>[ 5.109257] android_work: android_work: sent uevent USB_STATE=CONNECTED
1605<6>[ 5.110435] android_usb gadget: high-speed config #1: 86000c8.android_usb
1606<6>[ 5.110476] setting usb power supply type 4
1607<6>[ 5.110570] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 100
1608<6>[ 5.110577] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1609<6>[ 5.110734] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1610<6>[ 5.111056] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1720357, ocv=3977485, ibat=217638, rbatt=293237
1611<6>[ 5.170061] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1612<6>[ 5.566616] mtp_open
1613<3>[ 6.070048] LGE charging scenario : state 0 -> 0(0-1), temp=28, volt=3889, BTM=0, charger=1, cur_set=1200/1200, chg_cur = 378
1614<6>[ 6.070056] SMBCHG: smbchg_monitor_batt_temp: batt temp = 28, batt volt = 3889900, pre_otp_ibat = 2000, otp_ibat = 1200
1615<6>[ 6.070061] SMBCHG: smbchg_monitor_batt_temp: set otp_ibat to 1200
1616<6>[ 6.070327] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=1775004, ocv=3977485, ibat=129498, rbatt=293237
1617<3>[ 6.262727] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 207, y = 1032, z = 150, w_m = 13, w_n = 10, o = 0
1618<3>[ 6.345507] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 205, y = 1034, z = 137, w_m = 13, w_n = 8, o = 0
1619<3>[ 6.780681] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 231, y = 350, z = 142, w_m = 13, w_n = 10, o = 0
1620<3>[ 6.880180] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 225, y = 350, z = 147, w_m = 13, w_n = 8, o = 0
1621<3>[ 7.515690] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 51, y = 325, z = 133, w_m = 9, w_n = 4, o = 0
1622<3>[ 7.632070] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 45, y = 323, z = 143, w_m = 11, w_n = 5, o = 0
1623<3>[ 8.250896] [TOUCH][L][COMMON] [FINGER] PRESS <0> x = 175, y = 1102, z = 143, w_m = 11, w_n = 9, o = 0
1624<3>[ 8.634595] [TOUCH][L][COMMON] [FINGER] RELEASE<0> x = 707, y = 1081, z = 18, w_m = 7, w_n = 2, o = 0
1625<4>[ 8.647420] audit_printk_skb: 399 callbacks suppressed
1626<5>[ 8.647428] audit: type=1400 audit(151705.869:144): avc: denied { write } for pid=364 comm="recovery" name="recovery.log" dev="mmcblk0p65" ino=341062 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1627<5>[ 8.693587] audit: type=1400 audit(151705.919:145): avc: denied { setattr } for pid=364 comm="recovery" name="recovery.log" dev="mmcblk0p65" ino=341062 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1628<5>[ 8.693645] audit: type=1400 audit(151705.919:146): avc: denied { relabelfrom } for pid=364 comm="recovery" name="recovery.log" dev="mmcblk0p65" ino=341062 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1629<5>[ 8.693705] audit: type=1400 audit(151705.919:147): avc: denied { relabelto } for pid=364 comm="recovery" name="recovery.log" dev="mmcblk0p65" ino=341062 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1