· 9 years ago · Nov 26, 2016, 02:26 AM
1[ 0.000000]@0 Initializing cgroup subsys cpu
2[ 0.000000]@0 Initializing cgroup subsys cpuacct
3[ 0.000000]@0 Linux version 3.18.20-~Tyranus.R1.3T.UBER4.9 (mdalexca@DarkRoom) (gcc version 4.9.4 20160726 (optimized) (UBERTC-4.9.4) ) #1 SMP PREEMPT Fri Nov 25 20:08:31 EST 2016
4[ 0.000000]@0 CPU: AArch64 Processor [512f2011] revision 1
5[ 0.000000]@0 Machine: Qualcomm Technologies, Inc. MSM 8996pro + PMI8996 MTP
6[ 0.000000]@0 efi: Getting EFI parameters from FDT:
7[ 0.000000]@0 efi: UEFI not found.
8[ 0.000000]@0 Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB
9[ 0.000000]@0 Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 43 MiB
10[ 0.000000]@0 Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 98 MiB
11[ 0.000000]@0 Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB
12[ 0.000000]@0 Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
13[ 0.000000]@0 Reserved memory: reserved region for node 'ramoops_mem@ac000000': base 0x00000000ac000000, size 2 MiB
14[ 0.000000]@0 Reserved memory: reserved region for node 'param_mem@ac200000': base 0x00000000ac200000, size 1 MiB
15[ 0.000000]@0 Reserved memory: reserved region for node 'bootloader_log_mem@ac300000': base 0x00000000ac300000, size 1 MiB
16[ 0.000000]@0 Reserved memory: reserved region for node 'mtp_mem@ac400000': base 0x00000000ac400000, size 1 MiB
17[ 0.000000]@0 Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
18[ 0.000000]@0 Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB
19[ 0.000000]@0 Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
20[ 0.000000]@0 Removed memory: created DMA memory pool at 0x000000008ea00000, size 43 MiB
21[ 0.000000]@0 Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
22[ 0.000000]@0 Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
23[ 0.000000]@0 Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
24[ 0.000000]@0 Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
25[ 0.000000]@0 Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
26[ 0.000000]@0 Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
27[ 0.000000]@0 Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
28[ 0.000000]@0 Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
29[ 0.000000]@0 Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
30[ 0.000000]@0 Reserved memory: initialized node secure_region, compatible id shared-dma-pool
31[ 0.000000]@0 Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB
32[ 0.000000]@0 Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
33[ 0.000000]@0 Reserved memory: created DMA memory pool at 0x0000000083400000, size 0 MiB
34[ 0.000000]@0 Reserved memory: initialized node dfps_data_mem@83400000, compatible id shared-dma-pool
35[ 0.000000]@0 cma: Reserved 32 MiB at 0x00000000f6800000
36[ 0.000000]@0 psci: probing for conduit method from DT.
37[ 0.000000]@0 psci: PSCIv1.0 detected in firmware.
38[ 0.000000]@0 psci: Using standard PSCI v0.2 function IDs
39[ 0.000000]@0 psci: Initializing psco_cpu_init
40[ 0.000000]@0 psci: Initializing psco_cpu_init
41[ 0.000000]@0 psci: Initializing psco_cpu_init
42[ 0.000000]@0 PERCPU: Embedded 15 pages/cpu @ffffffc17d70e000 s23168 r8192 d30080 u61440
43[ 0.000000]@0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1490909
44[ 0.000000]@0 Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=65c82e87 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd:1:none:cfg:single_dsi fpsimd.fpsimd_settings=0 app_setting.use_app_setting=0 androidboot.startupmode=pon1 androidboot.mode=reboot androidboot.project_name=15811 androidboot.rf_version=32 androidboot.hw_version=28 ddr_manufacture_info=Samsung ddr_row0_info=16 androidboot.pcba_number=001581306B01036000002571 androidboot.enable_dm_verity=1 androidboot.secboot=enabled maxcpus=4 androidboot.angela=disabled
45[ 0.000000]@0 PID hash table entries: 4096 (order: 3, 32768 bytes)
46[ 0.000000]@0 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
47[ 0.000000]@0 Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
48[ 0.000000]@0 Memory: 5689336K/6058300K available (11658K kernel code, 1501K rwdata, 6016K rodata, 484K init, 3208K bss, 368964K reserved)
49[ 0.000000]@0 Virtual kernel memory layout:
50 vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
51 vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
52 0xffffffbdc1000000 - 0xffffffbdc6f65400 ( 95 MB actual)
53 PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
54 fixed : 0xffffffbffbdfe000 - 0xffffffbffbdff000 ( 4 KB)
55 modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
56 memory : 0xffffffc000000000 - 0xffffffc17d950000 ( 6105 MB)
57 .init : 0xffffffc0011c4000 - 0xffffffc00123d000 ( 484 KB)
58 .text : 0xffffffc000080000 - 0xffffffc0011c3914 ( 17679 KB)
59 .data : 0xffffffc001247000 - 0xffffffc0013be460 ( 1502 KB)
60[ 0.000000]@0 SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
61[ 0.000000]@0 HMP scheduling enabled.
62[ 0.000000]@0 Preemptible hierarchical RCU implementation.
63[ 0.000000]@0 RCU dyntick-idle grace-period acceleration is enabled.
64[ 0.000000]@0 Dump stacks of tasks blocking RCU-preempt GP.
65[ 0.000000]@0 NR_IRQS:64 nr_irqs:64 0
66[ 0.000000]@0 CPU0: found redistributor 0 region 0:0x0000000009c00000
67[ 0.000000]@0 mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
68[ 0.000000]@0 MPM 1 irq mapping errored -517
69[ 0.000000]@0 Offload RCU callbacks from all CPUs
70[ 0.000000]@0 Offload RCU callbacks from CPUs: 0-3.
71[ 0.000000]@0 Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
72[ 0.000000]@0 sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
73[ 0.000016]@0 Switched to clocksource arch_sys_counter
74[ 0.000671]@0 Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
75[ 0.000688]@0 pid_max: default: 32768 minimum: 301
76[ 0.000750]@0 Security Framework initialized
77[ 0.000764]@0 SELinux: Initializing.
78[ 0.000820]@0 Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
79[ 0.000829]@0 Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
80[ 0.001287]@0 Initializing cgroup subsys freezer
81[ 0.001554]@0 /cpus/cpu@0: Unknown CPU type
82[ 0.001563]@0 /cpus/cpu@1: Unknown CPU type
83[ 0.001570]@0 /cpus/cpu@100: Unknown CPU type
84[ 0.001578]@0 /cpus/cpu@101: Unknown CPU type
85[ 0.001607]@0 hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
86[ 0.001629]@0 EFI services will not be available.
87[ 0.009200]@0 NOHZ: local_softirq_pending 02
88[ 0.010833]@0
89**********************************************************
90[ 0.010846]@0 ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
91[ 0.010851]@0 ** **
92[ 0.010855]@0 ** trace_printk() being used. Allocating extra memory. **
93[ 0.010859]@0 ** **
94[ 0.010863]@0 ** This means that this is a DEBUG kernel and it is **
95[ 0.010867]@0 ** unsafe for produciton use. **
96[ 0.010871]@0 ** **
97[ 0.010875]@0 ** If you see this message and you are not debugging **
98[ 0.010879]@0 ** the kernel, report this immediately to your vendor! **
99[ 0.010883]@0 ** **
100[ 0.010887]@0 ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
101[ 0.010891]@0 **********************************************************
102[ 0.011528]@0 MSM Memory Dump base table set up
103[ 0.011550]@0 MSM Memory Dump apps data table set up
104[ 0.011570]@0 hyp_assign_table is not functional as qcom_secure_mem is not allocated.
105[ 0.011953]@0 clock-cpu-8996: configuring clocks for the perf cluster
106[ 0.012094]@0 cpu_clock_8996_early_init: finished CPU clock configuration
107[ 0.014580]@1 CPU1: found redistributor 1 region 0:0x0000000009c40000
108[ 0.017096]@2 CPU2: found redistributor 100 region 0:0x0000000009c80000
109[ 0.019434]@3 CPU3: found redistributor 101 region 0:0x0000000009cc0000
110[ 0.019563]@0 Brought up 4 CPUs
111[ 0.019579]@0 SMP: Total of 4 processors activated.
112[ 0.027624]@0 pinctrl core: initialized pinctrl subsystem
113[ 0.027999]@0 regulator-dummy: no parameters
114[ 0.083750]@0 NET: Registered protocol family 16
115[ 0.090125]@2 cpuidle: using governor ladder
116[ 0.110099]@2 cpuidle: using governor menu
117[ 0.130089]@2 cpuidle: using governor qcom
118[ 0.130920]@2 vdso: 2 pages (1 code @ ffffffc00124d000, 1 data @ ffffffc00124c000)
119[ 0.131403]@2 software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc0bfc00000-ffffffc0bfffffff]
120[ 0.132136]@2 DMA: preallocated 256 KiB pool for atomic allocations
121[ 0.132430]@2 msm_smem_init: unable to create logging context
122[ 0.132466]@2 msm_smd_init: unable to create SMD logging context
123[ 0.132473]@2 msm_smd_init: unable to create SMSM logging context
124[ 0.132712]@2 <CORE> glink_init: unable to create log context
125[ 0.132953]@2 <CORE> glink_core_register_transport: unable to create log context for [dsps:smd_trans]
126[ 0.133086]@2 <CORE> glink_core_register_transport: unable to create log context for [lpass:smd_trans]
127[ 0.133215]@2 <CORE> glink_core_register_transport: unable to create log context for [mpss:smd_trans]
128[ 0.133358]@2 <CORE> glink_core_register_transport: unable to create log context for [wcnss:smd_trans]
129[ 0.133491]@2 <CORE> glink_core_register_transport: unable to create log context for [rpm:smd_trans]
130[ 0.134206]@2 Failed to create IPC log0
131[ 0.134214]@2 Failed to create IPC log1
132[ 0.134219]@2 Failed to create IPC log2
133[ 0.134224]@2 Failed to create IPC log3
134[ 0.134228]@2 Failed to create IPC log4
135[ 0.135790]@2 platform 994400.qcom,mdss_dsi_pll: assigned reserved memory node dfps_data_mem@83400000
136[ 0.145464]@2 sps:sps is ready.
137[ 0.145957]@2 i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_12/i2c_12_active, deferring probe
138[ 0.146553]@2 i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_active, deferring probe
139[ 0.146794]@2 i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe
140[ 0.147037]@2 i2c-msm-v2 7577000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_3/i2c_3_active, deferring probe
141[ 0.147277]@2 i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
142[ 0.147599]@2 irq: no irq domain found for /soc/pinctrl@01010000 !
143[ 0.149063]@2 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
144[ 0.169820]@2 smd_channel_probe_now: allocation table not initialized
145[ 0.170109]@2 smd_channel_probe_now: allocation table not initialized
146[ 0.170352]@2 smd_channel_probe_now: allocation table not initialized
147[ 0.170593]@2 smd_channel_probe_now: allocation table not initialized
148[ 0.170812]@2 msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
149[ 0.171043]@2 msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
150[ 0.171702]@2 msm_rpm_dev_probe: APSS-RPM communication over GLINK
151[ 0.179223]@2 spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
152[ 0.180652]@2 spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
153[ 0.184914]@2 pmi8994_s2: 400 <--> 1065 mV at 1000 mV normal idle
154[ 0.185497]@2 platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
155[ 0.185749]@2 platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
156[ 0.186142]@2 platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
157[ 0.186460]@2 platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
158[ 0.189142]@1 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
159[ 0.189169]@1 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
160[ 0.189189]@1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
161[ 0.189202]@1 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
162[ 0.189305]@1 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
163[ 0.189312]@1 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
164[ 0.189321]@1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
165[ 0.189331]@1 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
166[ 0.193544]@1 platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
167[ 0.194654]@2 <CORE> glink_core_register_transport: unable to create log context for [mpss:smem]
168[ 0.195272]@2 <CORE> glink_core_register_transport: unable to create log context for [lpass:smem]
169[ 0.195925]@2 <CORE> glink_core_register_transport: unable to create log context for [dsps:smem]
170[ 0.196435]@2 <CORE> glink_core_register_transport: unable to create log context for [rpm:smem]
171[ 0.196742]@0 smd_channel_probe_now: allocation table not initialized
172[ 0.196811]@1 msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
173[ 0.197450]@2 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
174[ 0.197546]@2 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
175[ 0.197695]@2 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
176[ 0.197928]@2 msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
177[ 0.201733]@2 console [pstore0] enabled
178[ 0.201853]@2 pstore: Registered ramoops as persistent store backend
179[ 0.201863]@2 ramoops: attached 0x200000@0xac000000, ecc: 0/0
180[ 0.201998]@2 XCB bootloader_log_probe
181[ 0.202218]@2 bootloader_log!
182[ 0.203285]@2 apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
183[ 0.203615]@2 apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
184[ 0.203956]@2 apcc_l3_mem_acc_corner: 0 <--> 0 mV
185[ 0.204275]@2 gfx_mem_acc_corner: 0 <--> 0 mV
186[ 0.204674]@2 kryo0-retention: 468 <--> 892 mV at 520 mV
187[ 0.204868]@2 kryo0: 468 <--> 892 mV at 754 mV
188[ 0.205011]@2 kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
189[ 0.205310]@2 kryo1-retention: 468 <--> 892 mV at 520 mV
190[ 0.205500]@2 kryo1: 468 <--> 892 mV at 754 mV
191[ 0.205642]@2 kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
192[ 0.209580]@2 platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
193[ 0.210898]@2 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
194[ 0.228738]@1 __of_mpm_init(): MPM driver mapping exists
195[ 0.230791]@3 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
196[ 0.230939]@3 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
197[ 0.230954]@3 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
198[ 0.231243]@3 i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
199[ 0.231299]@3 i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
200[ 0.231313]@3 i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
201[ 0.231590]@3 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
202[ 0.231642]@3 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
203[ 0.231656]@3 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
204[ 0.231930]@3 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
205[ 0.231982]@3 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
206[ 0.231995]@3 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
207[ 0.232228]@3 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
208[ 0.232279]@3 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
209[ 0.232292]@3 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
210[ 0.232438]@3 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
211[ 0.233162]@3 pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
212[ 0.233613]@3 pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
213[ 0.233971]@3 pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
214[ 0.234402]@3 pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
215[ 0.234763]@3 pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
216[ 0.235184]@3 pm8994_s3: 1300 mV normal idle
217[ 0.235586]@3 pm8994_s4: 1800 mV normal idle
218[ 0.236009]@3 pm8994_s5: 2150 mV normal idle
219[ 0.236415]@3 pm8994_s7: 800 mV normal idle
220[ 0.236830]@3 pm8994_l1: 1000 mV normal idle
221[ 0.237249]@3 pm8994_l2: 1250 mV normal idle
222[ 0.237874]@3 pm8994_l3: 1100 mV normal idle
223[ 0.238286]@3 pm8994_l4: 1225 mV normal idle
224[ 0.238691]@3 pm8994_l6: 1200 mV normal idle
225[ 0.239101]@3 pm8994_l8: 1800 mV normal idle
226[ 0.239498]@3 pm8994_l9: 1800 mV normal idle
227[ 0.239906]@3 pm8994_l10: 1800 mV normal idle
228[ 0.240365]@3 pm8994_l11: 1150 mV normal idle
229[ 0.240788]@3 pm8994_l12: 1800 mV normal idle
230[ 0.241522]@3 pm8994_l13: 29500 <--> 2950 mV at 2950 mV normal idle
231[ 0.241937]@3 pm8994_l15: 1800 mV normal idle
232[ 0.242336]@3 pm8994_l16: 2700 mV normal idle
233[ 0.242756]@3 pm8994_l17: 2600 mV normal idle
234[ 0.243167]@3 pm8994_l18: 3300 mV normal idle
235[ 0.243575]@3 pm8994_l19: 3000 mV normal idle
236[ 0.243979]@3 pm8994_l20: 2950 mV normal idle
237[ 0.244405]@3 pm8994_l21: 2950 mV normal idle
238[ 0.244813]@3 pm8994_l22: 3000 <--> 3300 mV at 3000 mV normal idle
239[ 0.245233]@3 pm8994_l23: 2800 mV normal idle
240[ 0.245644]@3 pm8994_l24: 3075 mV normal idle
241[ 0.246071]@3 pm8994_l25: 1200 mV normal idle
242[ 0.246702]@3 pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
243[ 0.247070]@3 pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
244[ 0.247483]@3 pm8994_l27: 1000 <--> 1200 mV at 1030 mV normal idle
245[ 0.247897]@3 pm8994_l28: 925 mV normal idle
246[ 0.248511]@3 pm8994_l29: 2800 mV normal idle
247[ 0.248925]@3 pm8994_l30: 1800 mV normal idle
248[ 0.249334]@3 pm8994_l32: 1800 mV normal idle
249[ 0.249727]@3 pm8994_lvs1: no parameters
250[ 0.250150]@3 pm8994_lvs2: no parameters
251[ 0.250531]@3 pmi8994_s1: 1025 mV normal idle
252[ 0.250923]@3 pmi8994_boost_5v: no parameters
253[ 0.251005]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
254[ 0.251102]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
255[ 0.251381]@3 pmi8994_boost_pin_ctrl: no parameters
256[ 0.251427]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
257[ 0.251515]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
258[ 0.251838]@3 pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
259[ 0.252172]@3 pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
260[ 0.252382]@3 pm8994_s11_avs_limit: 470 <--> 1140 mV
261[ 0.252494]@3 spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
262[ 0.253309]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
263[ 0.253332]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
264[ 0.253346]@3 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
265[ 0.253361]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
266[ 0.253377]@3 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
267[ 0.253666]@3 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
268[ 0.253679]@3 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
269[ 0.253690]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
270[ 0.253701]@3 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
271[ 0.254339]@3 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
272[ 0.254721]@3 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
273[ 0.254781]@3 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
274[ 0.254796]@3 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
275[ 0.255058]@3 i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
276[ 0.255108]@3 i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
277[ 0.255121]@3 i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
278[ 0.255386]@3 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
279[ 0.255435]@3 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
280[ 0.255448]@3 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
281[ 0.255710]@3 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
282[ 0.255759]@3 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
283[ 0.255771]@3 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
284[ 0.256001]@3 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
285[ 0.256051]@3 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
286[ 0.256063]@3 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
287[ 0.256282]@3 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
288[ 0.275047]@3 qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
289[ 0.276020]@3 vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
290[ 0.276039]@3 vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
291[ 0.276051]@3 vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
292[ 0.276251]@3 vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
293[ 0.276264]@3 vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
294[ 0.276275]@3 vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
295[ 0.276489]@3 cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
296[ 0.276506]@3 cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
297[ 0.276516]@3 cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
298[ 0.285446]@3 qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
299[ 0.287111]@3 pmi8994_boost_5v: no parameters
300[ 0.287196]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
301[ 0.287294]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
302[ 0.287489]@3 pmi8994_boost_pin_ctrl: no parameters
303[ 0.287530]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
304[ 0.287616]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
305[ 0.288350]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
306[ 0.288372]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
307[ 0.288385]@3 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
308[ 0.288400]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
309[ 0.288416]@3 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
310[ 0.288590]@3 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
311[ 0.288601]@3 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
312[ 0.288612]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
313[ 0.288624]@3 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
314[ 0.289136]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
315[ 0.289148]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 2
316[ 0.289158]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
317[ 0.289168]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
318[ 0.289178]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
319[ 0.289189]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
320[ 0.289365]@3 cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=80000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
321[ 0.289550]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 565000 uV
322[ 0.289562]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 625000 uV
323[ 0.289571]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 715000 uV
324[ 0.289580]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 860000 uV
325[ 0.289675]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 298
326[ 0.289684]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 405, quot_offset[ 7]= 100
327[ 0.289694]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 604, quot_offset[ 7]= 195
328[ 0.289703]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 931, quot_offset[ 7]= 325
329[ 0.289835]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
330[ 0.289845]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 2
331[ 0.289854]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
332[ 0.289864]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
333[ 0.289873]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
334[ 0.289884]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
335[ 0.290089]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 565000 uV
336[ 0.290101]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 625000 uV
337[ 0.290111]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 715000 uV
338[ 0.290119]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 860000 uV
339[ 0.290132]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: CBF offset open-loop= 535000 uV
340[ 0.290142]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused LowSVS: CBF offset open-loop= 625000 uV
341[ 0.290150]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: CBF offset open-loop= 625000 uV
342[ 0.290159]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: CBF offset open-loop= 745000 uV
343[ 0.290167]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: CBF offset open-loop= 870000 uV
344[ 0.290209]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 298
345[ 0.290218]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 405, quot_offset[ 7]= 100
346[ 0.290228]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 604, quot_offset[ 7]= 195
347[ 0.290237]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 931, quot_offset[ 7]= 325
348[ 0.290338]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
349[ 0.290348]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 2
350[ 0.290357]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
351[ 0.290366]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
352[ 0.290375]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
353[ 0.290385]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
354[ 0.290574]@3 cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=130000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
355[ 0.290775]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 575000 uV
356[ 0.290788]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 635000 uV
357[ 0.290797]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 715000 uV
358[ 0.290807]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop=1030000 uV
359[ 0.290920]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 314
360[ 0.290930]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 421, quot_offset[ 7]= 105
361[ 0.290940]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 600, quot_offset[ 7]= 175
362[ 0.290950]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1256, quot_offset[ 7]= 655
363[ 0.291416]@3 cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
364apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
365[ 0.291767]@3 apc0_cbf_corner: 0 <--> 0 mV at 0 mV
366[ 0.294321]@3 cpr3_regulator_measure_aging: apcc: average quotient delta=-2 (count=10)
367[ 0.294347]@3 cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=625 uV
368[ 0.294493]@3 apc1_corner: 0 <--> 0 mV at 0 mV
369[ 0.295961]@3 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: speed bin = 0
370[ 0.295980]@3 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 1
371[ 0.295991]@3 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
372[ 0.296275]@3 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 610000 uV
373[ 0.296285]@3 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 655000 uV
374[ 0.296295]@3 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 775000 uV
375[ 0.296304]@3 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 925000 uV
376[ 0.296466]@3 cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
377gfx_corner: 0 <--> 0 mV at 0 mV
378[ 0.297842]@3 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
379[ 0.297925]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
380i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
381i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
382[ 0.299213]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
383i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
384i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
385[ 0.300891]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
386i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
387i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
388[ 0.302389]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
389i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
390i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
391[ 0.303344]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
392i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
393cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
394[ 0.306409]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 555000 uv) on cpu0
395[ 0.306456]@3 clock-cpu-8996: set OPP pair (2188800000 Hz, 1005000 uv) on cpu0
396[ 0.306476]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 555000 uv) on cpu1
397[ 0.306518]@3 clock-cpu-8996: set OPP pair (2188800000 Hz, 1005000 uv) on cpu1
398[ 0.306537]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 565000 uv) on cpu2
399[ 0.306595]@3 clock-cpu-8996: set OPP pair (2342400000 Hz, 1025000 uv) on cpu2
400[ 0.306614]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 565000 uv) on cpu3
401[ 0.306667]@3 clock-cpu-8996: set OPP pair (2342400000 Hz, 1025000 uv) on cpu3
402[ 0.306785]@3 clock-cpu-8996: set OPP pair (192000000 Hz, 540000 uv) on soc:qcom,m4m
403[ 0.306825]@3 clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on soc:qcom,m4m
404[ 0.307146]@3 qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
405[ 0.307471]@3 gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 540000 uV) on b00000.qcom,kgsl-3d0
406[ 0.307509]@3 gfx3d_clk_src_v2: set OPP pair(652800000 Hz: 900000 uV) on b00000.qcom,kgsl-3d0
407[ 0.308885]@3 qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
408[ 0.309096]@3 pmi8994_boost_5v: no parameters
409[ 0.309155]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
410[ 0.309253]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
411[ 0.309445]@3 pmi8994_boost_pin_ctrl: no parameters
412[ 0.309489]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
413[ 0.309574]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
414[ 0.310395]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
415[ 0.310419]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
416[ 0.310432]@3 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
417[ 0.310447]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
418[ 0.310463]@3 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
419[ 0.310703]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
420[ 0.310718]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
421[ 0.310729]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
422[ 0.310746]@3 msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
423[ 0.311669]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
424[ 0.311685]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
425[ 0.311697]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
426[ 0.311841]@3 pmi8994_boost_5v: no parameters
427[ 0.311906]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
428[ 0.311999]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
429[ 0.312196]@3 pmi8994_boost_pin_ctrl: no parameters
430[ 0.312238]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
431[ 0.312321]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
432[ 0.374125]@1 KPI: Bootloader start count = 40298
433[ 0.374144]@1 KPI: Bootloader end count = 258786
434[ 0.374152]@1 KPI: Bootloader display count = 240486
435[ 0.374161]@1 KPI: Bootloader load kernel count = 1525
436[ 0.374172]@1 KPI: Kernel MPM timestamp = 281018
437[ 0.374179]@1 KPI: Kernel MPM Clock frequency = 32768
438[ 0.374194]@1 socinfo_print: v0.11, id=305, ver=1.1, raw_id=95, raw_ver=1, hw_plat=8, hw_plat_ver=65536
439 accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=841506937 num_pmics=2
440[ 0.374236]@1 init_project_info: project_name: 15811 hw_version: 28 rf_v1: 32 rf_v2: 1: rf_v3: 0 paltform_id:305
441[ 0.374249]@1 init_project_info: aboard_version: 1
442[ 0.375297]@1 op_rf_cable soc:oneplus_rf_cable: rf,cable-gpio - gpio: 131
443[ 0.375515]@1 requested irq 420
444[ 0.375543]@1 modify_rf_cable_smem_info: rf_cable: 0
445[ 0.375557]@1 op_rf_cable_probe: probe ok!
446[ 0.375979]@1 gdsc_mmagic_bimc: no parameters
447[ 0.376808]@1 rome_vreg: no parameters
448[ 0.377458]@1 vgaarb: loaded
449[ 0.379098]@1 SCSI subsystem initialized
450[ 0.380399]@1 usbcore: registered new interface driver usbfs
451[ 0.380460]@1 usbcore: registered new interface driver hub
452[ 0.380570]@1 usbcore: registered new device driver usb
453[ 0.381034]@1 soc:usb_nop_phy supply vcc not found, using dummy regulator
454[ 0.381806]@1 media: Linux media interface: v0.10
455[ 0.381854]@1 Linux video capture interface: v2.00
456[ 0.420249]@1 cpufreq: driver msm up and running
457[ 0.420858]@1 platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
458[ 0.421309]@1 platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
459[ 0.421784]@1 platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
460[ 0.422295]@1 ION heap system created
461[ 0.422417]@1 ION heap kmalloc created
462[ 0.422426]@1 ION heap adsp created at 0x00000000ff800000 with size 400000
463[ 0.422436]@1 ION heap qsecom created at 0x00000000fe400000 with size 1400000
464[ 0.422445]@1 ION heap secure_display created at 0x00000000f8800000 with size 5c00000
465[ 0.422453]@1 ION heap secure_heap created
466[ 0.423239]@1 msm_bus_fabric_init_driver
467[ 0.425762]@1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
468[ 0.425782]@1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
469[ 0.428479]@1 msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
470[ 0.428912]@1 msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
471[ 0.434132]@2 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
472[ 0.434147]@2 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
473[ 0.434155]@2 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
474[ 0.434267]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
475[ 0.434288]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
476[ 0.434306]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
477[ 0.434325]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
478[ 0.434342]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
479[ 0.434360]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
480[ 0.434377]@2 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
481[ 0.435601]@2 qcom,qpnp-power-on qpnp-power-on-ffffffc175bc6000: PMIC@SID0 Power-on reason: Triggered from Hard Reset[0x21] and 'cold' boot
482[ 0.435612]@2 qcom,qpnp-power-on qpnp-power-on-ffffffc175bc6000: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC)[0x21] and 'cold' boot
483[ 0.435628]@2 qcom,qpnp-power-on qpnp-power-on-ffffffc175bc6000: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)[0x2]
484[ 0.435734]@2 input: qpnp_pon as /devices/virtual/input/input0
485[ 0.436198]@2 pon_spare_reg: no parameters
486[ 0.436251]@2 qcom,qpnp-power-on qpnp-power-on-ffffffc175be8400: No PON config. specified
487[ 0.436305]@2 qcom,qpnp-power-on qpnp-power-on-ffffffc175be8400: PMIC@SID2 Power-on reason: Triggered from USB (USB charger insertion)[0x30] and 'cold' boot
488[ 0.436311]@2 qcom,qpnp-power-on qpnp-power-on-ffffffc175be8400: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC)[0x30] and 'cold' boot
489[ 0.436327]@2 qcom,qpnp-power-on qpnp-power-on-ffffffc175be8400: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)[0x2]
490[ 0.436478]@2 PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
491[ 0.436562]@2 PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
492[ 0.437531]@2 ipa ipa_uc_state_check:291 uC interface not initialized
493[ 0.437545]@2 ipa ipa_sps_irq_control_all:932 EP (2) not allocated.
494[ 0.437549]@2 ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
495[ 0.439321]@3 sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000000684000
496sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000000684000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000000684000
497sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000000684000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000000684000
498sps:BAM 0x0000000000684000 is registered.ipa ipa_uc_state_check:291 uC interface not initialized
499[ 0.440260]@3 sps:BAM 0x0000000000684000 (va:0xffffff80020c0000) enabled: ver:0x27, number of pipes:20
500[ 0.441554]@3 ipa ipa_uc_state_check:291 uC interface not initialized
501[ 0.449455]@3 ipa ipa_uc_state_check:291 uC interface not initialized
502[ 0.451221]@3 IPA driver initialization was successful.
503[ 0.452440]@3 gdsc_mmagic_video: no parameters
504[ 0.452650]@3 gdsc_mmagic_mdss: no parameters
505[ 0.452794]@3 gdsc_mmagic_camss: no parameters
506[ 0.452986]@3 gdsc_venus: no parameters
507[ 0.453007]@3 gdsc_venus: supplied by gdsc_mmagic_video
508[ 0.453175]@3 gdsc_venus_core0: fast normal
509[ 0.453322]@3 gdsc_venus_core1: fast normal
510[ 0.453478]@3 gdsc_camss_top: no parameters
511[ 0.453497]@3 gdsc_camss_top: supplied by gdsc_mmagic_camss
512[ 0.453659]@3 gdsc_vfe0: no parameters
513[ 0.453682]@3 gdsc_vfe0: supplied by gdsc_camss_top
514[ 0.453829]@3 gdsc_vfe1: no parameters
515[ 0.453845]@3 gdsc_vfe1: supplied by gdsc_camss_top
516[ 0.454011]@3 gdsc_mdss: no parameters
517[ 0.454030]@3 gdsc_mdss: supplied by gdsc_mmagic_mdss
518[ 0.454264]@3 gdsc_jpeg: no parameters
519[ 0.454282]@3 gdsc_jpeg: supplied by gdsc_camss_top
520[ 0.454417]@3 gdsc_cpp: no parameters
521[ 0.454435]@3 gdsc_cpp: supplied by gdsc_camss_top
522[ 0.454584]@3 gdsc_pcie_0: no parameters
523[ 0.454710]@3 gdsc_pcie_1: no parameters
524[ 0.454836]@3 gdsc_pcie_2: no parameters
525[ 0.454966]@3 gdsc_usb30: no parameters
526[ 0.455094]@3 gdsc_ufs: no parameters
527[ 0.455251]@3 gdsc_fd: no parameters
528[ 0.455268]@3 gdsc_fd: supplied by gdsc_camss_top
529[ 0.455423]@3 gdsc_gpu: no parameters
530[ 0.455565]@3 gdsc_gpu_gx: no parameters
531[ 0.455912]@3 gdsc_gpu_gx: supplied by gfx_corner
532[ 0.456076]@3 gdsc_hlos1_vote_aggre0_noc: no parameters
533[ 0.456200]@3 gdsc_hlos1_vote_lpass_adsp: no parameters
534[ 0.456337]@3 gdsc_hlos1_vote_lpass_core: no parameters
535[ 0.456464]@3 gdsc_aggre0_noc: no parameters
536[ 0.458613]@3 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
537[ 0.458633]@3 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
538[ 0.460633]@3 dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
539[ 0.460717]@3 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
540[ 0.460729]@3 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
541[ 0.461827]@3 pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
542[ 0.462248]@3 dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
543[ 0.475299]@3 arm-smmu d80000.arm,smmu-jpeg: found 4 context interrupt(s) but have 3 context banks. assuming 3 context interrupts.
544[ 0.482770]@3 arm-smmu b40000.arm,smmu-kgsl: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts.
545[ 0.491050]@3 arm-smmu da0000.arm,smmu-vfe: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts.
546[ 0.499354]@3 arm-smmu d40000.arm,smmu-venus: found 11 context interrupt(s) but have 7 context banks. assuming 7 context interrupts.
547[ 0.507878]@3 arm-smmu d00000.arm,smmu-mdp: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts.
548[ 0.516633]@3 arm-smmu d20000.arm,smmu-rot: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts.
549[ 0.525019]@3 arm-smmu d60000.arm,smmu-cpp_fd: found 4 context interrupt(s) but have 3 context banks. assuming 3 context interrupts.
550[ 0.532511]@3 arm-smmu 1600000.arm,smmu-lpass_q6: found 16 context interrupt(s) but have 12 context banks. assuming 12 context interrupts.
551[ 0.539937]@3 arm-smmu 1640000.arm,smmu-anoc0: found 6 context interrupt(s) but have 7 context banks. assuming 7 context interrupts.
552[ 0.546822]@3 arm-smmu 1660000.arm,smmu-anoc1: found 8 context interrupt(s) but have 4 context banks. assuming 4 context interrupts.
553[ 0.553879]@3 arm-smmu 1680000.arm,smmu-anoc2: found 12 context interrupt(s) but have 8 context banks. assuming 8 context interrupts.
554[ 0.556681]@3 get_param_by_index_and_offset[75] sid_index = 12 offset = 0 buf = ffffffc001671d28 length = 420
555[ 0.556782]@3 Advanced Linux Sound Architecture Driver Initialized.
556[ 0.557381]@3 Bluetooth: ffffffc1764bbd20
557NET: Registered protocol family 31
558[ 0.557483]@3 Bluetooth: ffffffc1764bbd20
559Bluetooth: ffffffc1764bbd00Bluetooth: ffffffc1764bbcd0
560Bluetooth: ffffffc1764bbce0cfg80211: Calling CRDA to update world regulatory domain
561[ 0.557959]@3 cfg80211: World regulatory domain updated:
562[ 0.557967]@3 cfg80211: DFS Master region: unset
563cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
564[ 0.557993]@3 cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
565[ 0.558002]@3 cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
566[ 0.558010]@3 cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
567[ 0.558019]@3 cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
568[ 0.558027]@3 cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
569[ 0.558035]@3 cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
570[ 0.558043]@3 cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
571[ 0.558052]@3 cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
572[ 0.558234]@3 pcie:pcie_init.
573[ 0.558244]@3 pcie_init: unable to create IPC log context for pcie0-short
574[ 0.558252]@3 pcie_init: unable to create IPC log context for pcie0-long
575[ 0.558259]@3 pcie_init: unable to create IPC log context for pcie0-dump
576[ 0.558268]@3 pcie_init: unable to create IPC log context for pcie1-short
577[ 0.558275]@3 pcie_init: unable to create IPC log context for pcie1-long
578[ 0.558283]@3 pcie_init: unable to create IPC log context for pcie1-dump
579[ 0.558290]@3 pcie_init: unable to create IPC log context for pcie2-short
580[ 0.558298]@3 pcie_init: unable to create IPC log context for pcie2-long
581[ 0.558305]@3 pcie_init: unable to create IPC log context for pcie2-dump
582[ 0.560006]@3 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
583[ 0.562637]@3 msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
584[ 0.565175]@0 pmi8994_boost_5v: no parameters
585[ 0.565463]@0 pmi8994_boost_5v: supplied by pon_spare_reg
586[ 0.565937]@0 pmi8994_boost_pin_ctrl: no parameters
587[ 0.566123]@0 pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
588[ 0.566766]@3 Switched to clocksource arch_sys_counter
589[ 0.567721]@3 bcl_peripheral:bcl_perph_init BCL Initialized
590[ 0.569678]@3 NET: Registered protocol family 2
591[ 0.570382]@3 TCP established hash table entries: 65536 (order: 7, 524288 bytes)
592[ 0.570534]@3 TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
593[ 0.571509]@3 TCP: Hash tables configured (established 65536 bind 65536)
594[ 0.571699]@3 TCP: reno registered
595[ 0.571742]@3 UDP hash table entries: 4096 (order: 5, 131072 bytes)
596[ 0.571832]@3 UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
597[ 0.572255]@3 NET: Registered protocol family 1
598[ 0.572847]@3 Trying to unpack rootfs image as initramfs...
599[ 0.610452]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:62
600[ 0.610523]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:62
601[ 0.610532]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:62
602[ 0.610542]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:62
603[ 0.618943]@3 Freeing initrd memory: 2360K (ffffffc002200000 - ffffffc00244e000)
604[ 0.621327]@3 kryo perfevents: CPU pmu for kryo-pmuv3 detected
605[ 0.626696]@3 futex hash table entries: 1024 (order: 5, 131072 bytes)
606[ 0.626851]@3 audit: initializing netlink subsys (disabled)
607[ 0.626963]@3 audit: type=2000 audit(0.619:1): initialized
608[ 0.627562]@3 vmscan: error setting kswapd cpu affinity mask
609[ 0.631323]@3 ntfs: driver 2.1.31 [Flags: R/O].
610[ 0.631449]@3 fuse init (API version 7.23)
611[ 0.631772]@3 exfat: init_exfat_fs: exFAT Filesystem version 1.2.23
612[ 0.631835]@3 Registering sdcardfs 3.1.0
613[ 0.631916]@3 msgmni has been set to 11412
614[ 0.634073]@3 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
615[ 0.634096]@3 io scheduler noop registered
616[ 0.634107]@3 io scheduler deadline registered
617[ 0.634219]@3 io scheduler cfq registered (default)
618[ 0.645334]@3 mdss_mdp_parse_dt_hw_settings: MDSS VBIF settings not found
619[ 0.645388]@3 mdss_mdp_parse_dt_prop_len: prop qcom,mdss-smp-data : doesn't exist in device tree
620[ 0.645441]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:0 num:0 ndx:0x1 prio:0
621[ 0.645454]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:4 num:1 ndx:0x2 prio:1
622[ 0.645463]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:8 num:2 ndx:0x4 prio:2
623[ 0.645475]@3 mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:1 num:3 ndx:0x8 prio:4
624[ 0.645484]@3 mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:5 num:4 ndx:0x10 prio:5
625[ 0.645493]@3 mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:9 num:5 ndx:0x20 prio:6
626[ 0.645504]@3 mdss_mdp_pipe_addr_setup: type:3 ftchid:0 xinid:2 num:6 ndx:0x40 prio:8
627[ 0.645512]@3 mdss_mdp_pipe_addr_setup: type:3 ftchid:0 xinid:10 num:7 ndx:0x80 prio:9
628[ 0.645520]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:12 num:8 ndx:0x100 prio:3
629[ 0.645530]@3 mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:13 num:9 ndx:0x200 prio:7
630[ 0.645547]@3 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
631[ 0.645573]@3 mdss_mdp_pipe_addr_setup: type:4 ftchid:-1 xinid:7 num:10 ndx:0x400 prio:0
632[ 0.645582]@3 mdss_mdp_pipe_addr_setup: type:4 ftchid:-1 xinid:7 num:11 ndx:0x800 prio:1
633[ 0.645591]@3 mdss_mdp_parse_dt_pipe: dedicated vp cursors detected, num=2
634[ 0.645663]@3 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
635[ 0.645683]@3 mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels : doesn't exist in device tree
636[ 0.645726]@3 mdss_mdp_parse_dt_prop_len: prop qcom,mdss-smp-data : doesn't exist in device tree
637[ 0.646682]@3 mdss_mdp_irq_clk_register: unable to get clk: lut_clk
638[ 0.648230]@3 xlog_status: enable:0, panic:0, dump:2
639[ 0.649512]@3 mdss_smmu_attach_v2: iommu device not attached for domain[0]
640[ 0.649532]@3 mdss_mdp_clk_ctrl: IOMMU attach failed
641[ 0.649545]@3 No change in context(0==0), skip
642[ 0.651173]@3 mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on
643[ 0.655880]@3 mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
644[ 0.656024]@3 mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
645[ 0.656125]@3 mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
646[ 0.656226]@3 mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
647[ 0.658938]@3 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
648[ 0.659268]@3 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd
649[ 0.659284]@3 mdss_dsi_panel_init: Panel Name = samsung s6e3fa3 1080p cmd mode dsi panel
650[ 0.659401]@3 mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd" (ffffffc1764bb388)
651[ 0.659416]@3 mdss_dsi_parse_dcs_cmds: dcs_cmd=5 len=152, cmd_cnt=16 link_state=0
652[ 0.659428]@3 mdss_dsi_parse_dcs_cmds: dcs_cmd=5 len=9, cmd_cnt=1 link_state=0
653[ 0.659437]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
654[ 0.659484]@3 mdss_dsi_parse_dcs_cmds: dcs_cmd=15 len=9, cmd_cnt=1 link_state=1
655[ 0.659499]@3 mdss_dsi_parse_dcs_cmds: dcs_cmd=39 len=9, cmd_cnt=1 link_state=1
656[ 0.659510]@3 mdss_dsi_parse_dcs_cmds: dcs_cmd=39 len=9, cmd_cnt=1 link_state=1
657[ 0.659519]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-Adobe-rgb-on-command
658[ 0.659529]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-Adobe-rgb-off-command
659[ 0.659538]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-dci-p3-on-command
660[ 0.659547]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-dci-p3-off-command
661[ 0.659558]@3 mdss_dsi_parse_dcs_cmds: dcs_cmd=15 len=9, cmd_cnt=1 link_state=1
662[ 0.659569]@3 mdss_dsi_parse_dcs_cmds: dcs_cmd=15 len=9, cmd_cnt=1 link_state=1
663[ 0.659580]@3 mdss_dsi_parse_dcs_cmds address : 0xc8 size : 0xa offset : 0x28
664[ 0.659589]@3 mdss_dsi_parse_dcs_cmds: dcs_cmd=6 len=10, cmd_cnt=1 link_state=0
665[ 0.659601]@3 mdss_dsi_parse_dcs_cmds: dcs_cmd=39 len=10, cmd_cnt=1 link_state=0
666[ 0.659612]@3 mdss_dsi_parse_dcs_cmds: dcs_cmd=29 len=10, cmd_cnt=1 link_state=0
667[ 0.659624]@3 mdss_dsi_parse_dcs_cmds: dcs_cmd=37 len=9, cmd_cnt=1 link_state=0
668[ 0.659635]@3 mdss_dsi_parse_dcs_cmds: dcs_cmd=15 len=9, cmd_cnt=1 link_state=0
669[ 0.659671]@3 mdss_dsi_parse_dcs_cmds: dcs_cmd=5 len=18, cmd_cnt=2 link_state=1
670[ 0.659685]@3 mdss_dsi_parse_panel_features: partial_update_enabled=0
671[ 0.659696]@3 mdss_dsi_parse_panel_features: ulps feature disabled
672[ 0.659705]@3 mdss_dsi_parse_panel_features: ulps during suspend feature disabled
673mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
674[ 0.659732]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
675[ 0.659763]@3 mdss_dsi_panel_init: Panel Manufacture = SAMSUNG
676[ 0.659769]@3 mdss_dsi_panel_init: Panel Version = S6E3FA3
677[ 0.659779]@3 high brightness panel: 1
678[ 0.660293]@3 mdss_dsi_parse_ctrl_params:3875 Unable to read qcom,display-id, data= (null),len=20
679[ 0.660341]@3 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
680[ 0.660568]@3 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
681[ 0.660576]@3 mdss_dsi_retrieve_ctrl_resources+0x164/0x1d4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
682[ 0.660599]@3 mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80021d6000 ctrl_size=400 phy_base=ffffff80021f2400 phy_size=588
683[ 0.660760]@3 dsi_panel_device_register: Continuous splash enabled
684[ 0.661358]@3 mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
685[ 0.664619]@3 mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
686[ 0.665991]@3 mdss_dsi_status_init: DSI status check interval:5000
687[ 0.667038]@3 mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
688[ 0.668709]@3 mdss_fb_probe: fb0: split_mode:0 left:0 right:0
689[ 0.669212]@3 mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
690[ 0.670158]@3 mdss_fb_probe: fb1: split_mode:0 left:0 right:0
691[ 0.670238]@3 mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
692[ 0.670305]@3 mdss_mdp_splash_parse_dt: splash mem child node is not present
693[ 0.671175]@3 mdss_mdp_kcal_store_fb0_ctl panel name samsung s6e3fa3 1080p cmd mode dsi panel
694[ 0.671187]@3 mdss_mdp_kcal_store_fb0_ctl panel found...
695[ 0.671234]@3 kcal_ctrl_init: registered
696[ 0.673906]@3 glink_loopback_server_init: unable to create log context
697[ 0.674229]@3 msm_smp2p_init: unable to create log context
698[ 0.676518]@3 qmi_log_init: Unable to create QMI IPC logging for Req/Resp
699logging for Indications: Unable to create QMI IPC qmi_log_initl2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
700[ 0.688431]@3 msm_rpm_log_probe: OK
701[ 0.694076]@0 smd_channel_probe_now: allocation table not initialized
702[ 0.698484]@3 uart_tx_gpio is not available
703[ 0.698504]@3 uart_rx_gpio is not available
704[ 0.698511]@3 uart_cts_gpio is not available
705[ 0.698518]@3 uart_rfr_gpio is not available
706[ 0.698657]@3 msm_serial_hs 7570000.uart: msm_hs_probe: error creating logging context
707sps: BAM device 0x0000000007544000 is not registered yet.
708[ 0.699370]@3 sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000007544000
709sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000007544000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000007544000
710sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000007544000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000007544000
711sps:BAM 0x0000000007544000 is registered.msm_serial_hs 7570000.uart: msm_hs_probe: error creating tx logging context
712msm_serial_hs 7570000.uart: msm_hs_probe: error creating rx logging context
713msm_serial_hs 7570000.uart: msm_hs_probe: error creating usr logging context
7147570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 20, base_baud = 460800) is a MSM HS UART
715[ 0.703197]@3 msm_serial_hs module loaded
716[ 0.703967]@3 msm_serial_hsl_probe: detected port #0 (ttyHSL0)
717[ 0.704872]@3 msm_serial_hsl_init: msm_hsl_platform_driver and msm_hsl_uart_driver unregister
718[ 0.704906]@3 smd_tty_log_init: Unable to create IPC log
719diag: Failed to create IPC logging context
720[ 0.710298]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:46
721[ 0.710322]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:46
722[ 0.710329]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:46
723[ 0.710337]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:46
724[ 0.720813]@3 brd: module loaded
725[ 0.721963]@3 loop: module loaded
726[ 0.722080]@3 at24 6-0051: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
727[ 0.723036]@3 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
728[ 0.723079]@3 QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
729QSEECOM: qseecom_probe: no-clock-support=0x1QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
730[ 0.724974]@3 i2c-core: driver [tusb320] using legacy suspend method
731[ 0.724989]@3 i2c-core: driver [tusb320] using legacy resume method
732[ 0.725033]@3 i2c-core: driver [fusb301] using legacy suspend method
733[ 0.725040]@3 i2c-core: driver [fusb301] using legacy resume method
734[ 0.725085]@3 i2c-core: driver [ptn5150] using legacy suspend method
735[ 0.725091]@3 i2c-core: driver [ptn5150] using legacy resume method
736[ 0.726696]@3 gpio_dev_probe
737[ 0.726749]@3 i= 1 gpio=: 97
738[ 0.726776]@3 i= 2 gpio=: 98
739[ 0.726810]@3 i= 3 gpio=: 100
740[ 0.726853]@3 i= 4 gpio=: 115
741[ 0.726906]@3 i= 5 gpio=: 127
742[ 0.726968]@3 i= 6 gpio=: 133
743[ 0.727040]@3 i= 7 gpio=: 136
744[ 0.727072]@3 gpio_pinctrl_init
745[ 0.727442]@3 gpio_dev_probe ok!
746[ 0.727737]@3 i2c-core: driver [tabla-i2c-core] using legacy suspend method
747[ 0.727746]@3 i2c-core: driver [tabla-i2c-core] using legacy resume method
748[ 0.727793]@3 i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
749[ 0.727800]@3 i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
750[ 0.727847]@3 i2c-core: driver [tasha-i2c-core] using legacy suspend method
751[ 0.727853]@3 i2c-core: driver [tasha-i2c-core] using legacy resume method
752[ 0.729245]@3 Loading pn544 driver
753[ 0.729327]@3 Enter pn544_probe !!!
754[ 0.729502]@3 pn544_parse_dt: 9, 94, 12, 1015 ,1018, 0
755[ 0.729617]@3 successfully got regulator_s4
756[ 0.729821]@3 successfully set regulator voltage_s4
757[ 0.729829]@3 get BBCLK2!!!
758[ 0.729859]@3 clk_prepare_enable. ret = 0
759[ 0.729995]@3 pn544_probe : requesting IRQ 298
760[ 0.730200]@3 [NXP-P61] : Entry : p61_dev_init
761[ 0.731456]@3 qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
762[ 0.731479]@3 qce 660000.qcedev: CE device = 0x0
763, IO base, CE = 0xffffff8002740000
764, Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
765IO base BAM = 0x (null)
766BAM IRQ 156
767Engines Availability = 0x2011053
768[ 0.731524]@3 sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000000644000
769sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000000644000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000000644000
770sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000000644000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000000644000
771sps:BAM 0x0000000000644000 is registered.sps:BAM 0x0000000000644000 (va:0xffffff8003640000) enabled: ver:0x27, number of pipes:16
772[ 0.731953]@3 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
773[ 0.739902]@3 qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
774[ 0.739935]@3 qcrypto 660000.qcrypto: CE device = 0x0
775, IO base, CE = 0xffffff8003740000
776, Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
777IO base BAM = 0x (null)
778BAM IRQ 156
779Engines Availability = 0x2011053
780[ 0.740343]@3 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
781[ 0.745557]@3 qcrypto 660000.qcrypto: qcrypto-ecb-aes
782[ 0.745654]@3 qcrypto 660000.qcrypto: qcrypto-cbc-aes
783[ 0.745727]@3 qcrypto 660000.qcrypto: qcrypto-ctr-aes
784[ 0.745801]@3 qcrypto 660000.qcrypto: qcrypto-ecb-des
785[ 0.745873]@3 qcrypto 660000.qcrypto: qcrypto-cbc-des
786[ 0.745946]@3 qcrypto 660000.qcrypto: qcrypto-ecb-3des
787[ 0.746016]@3 qcrypto 660000.qcrypto: qcrypto-cbc-3des
788[ 0.746092]@3 qcrypto 660000.qcrypto: qcrypto-xts-aes
789[ 0.746165]@3 qcrypto 660000.qcrypto: qcrypto-sha1
790[ 0.746236]@3 qcrypto 660000.qcrypto: qcrypto-sha256
791[ 0.746308]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
792[ 0.746376]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
793[ 0.746447]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
794[ 0.746516]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
795[ 0.746586]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
796[ 0.746654]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
797[ 0.746726]@3 qcrypto 660000.qcrypto: qcrypto-hmac-sha1
798[ 0.746794]@3 qcrypto 660000.qcrypto: qcrypto-hmac-sha256
799[ 0.746865]@3 qcrypto 660000.qcrypto: qcrypto-aes-ccm
800[ 0.746936]@3 qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
801[ 0.749525]@3 ICE IRQ = 28
802[ 0.753809]@3 qcom_ice_get_pdevice: found ice device ffffffc0b595f400
803[ 0.753839]@3 qcom_ice_get_pdevice: matching platform device ffffffc175b51400
804[ 0.754322]@3 scm_call failed: func id 0x42000c02, arginfo: 0x2, args: 0x13, 0x0, 0x0, 0x0, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
805[ 0.754910]@3 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -517
806ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -517
807scsi host0: ufshcd
808[ 0.759384]@3 qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002450000
809[ 0.771658]@3 SCSI Media Changer driver v0.25
810[ 0.775665]@3 sps:BAM 0x0000000007544000 (va:0xffffff80025c0000) enabled: ver:0x19, number of pipes:24
811[ 0.775871]@3 [NXP-P61] : p61_probe chip select : 1 , bus number = 0
812[ 0.776048]@3 p61_parse_dt: 34, 21 0
813[ 0.776055]@3 [NXP-P61] : Entry : p61_hw_setup
814[ 0.776092]@3 [NXP-P61] : Exit : p61_hw_setup
815[ 0.776201]@3 [NXP-P61] : Entry : p61_disable_irq
816[ 0.776208]@3 [NXP-P61] : Exit : p61_disable_irq
817[ 0.776214]@3 [NXP-P61] : Exit : p61_probe
818[ 0.777096]@3 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
819[ 0.778151]@3 tun: Universal TUN/TAP device driver, 1.6
820[ 0.778159]@3 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
821[ 0.778256]@3 PPP generic driver version 2.4.2
822[ 0.778319]@3 PPP BSD Compression module registered
823[ 0.778328]@3 PPP Deflate Compression module registered
824[ 0.778366]@3 PPP MPPE Compression module registered
825[ 0.778377]@3 NET: Registered protocol family 24
826[ 0.791518]@0 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
827[ 0.875897]@0 PCI host bridge /soc/qcom,pcie@00600000 ranges:
828[ 0.875933]@0 No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
829[ 0.875963]@0 IO 0x0c200000..0x0c2fffff -> 0x0c200000
830[ 0.875976]@0 MEM 0x0c300000..0x0cffffff -> 0x0c300000
831[ 0.876104]@0 pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
832[ 0.876116]@0 pci_bus 0000:00: root bus resource [bus 00-ff]
833[ 0.876126]@0 pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
834[ 0.876134]@0 pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
835[ 0.876192]@0 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
836[ 0.876291]@0 pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
837[ 0.876435]@0 pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
838[ 0.876600]@0 msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
839[ 0.877305]@0 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
840[ 0.877331]@0 pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c5fffff]
841[ 0.877341]@0 pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
842[ 0.877361]@0 pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
843[ 0.877510]@0 pci 0000:00:00.0: PCI bridge to [bus 01]
844[ 0.877535]@0 pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff]
845[ 0.892737]@0 cnss: Platform driver probed successfully.
846[ 0.893805]@0 usbcore: registered new interface driver asix
847[ 0.893901]@0 usbcore: registered new interface driver ax88179_178a
848[ 0.893927]@0 usbcore: registered new interface driver cdc_ether
849[ 0.893958]@0 usbcore: registered new interface driver net1080
850[ 0.893983]@0 usbcore: registered new interface driver cdc_subset
851[ 0.894009]@0 usbcore: registered new interface driver zaurus
852[ 0.894357]@0 usbcore: registered new interface driver cdc_ncm
853[ 0.895116]@0 msm_sharedmem: sharedmem_register_qmi: qmi init successful
854[ 0.897536]@2 msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
855[ 0.904537]@3 msm-dwc3 6a00000.ssusb: unable to get dbm device
856[ 0.907835]@3 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
857[ 0.907861]@3 ehci-pci: EHCI PCI platform driver
858[ 0.907957]@3 usbcore: registered new interface driver usb-storage
859[ 0.907982]@3 usbcore: registered new interface driver ums-alauda
860[ 0.908004]@3 usbcore: registered new interface driver ums-cypress
861[ 0.908023]@3 usbcore: registered new interface driver ums-datafab
862[ 0.908042]@3 usbcore: registered new interface driver ums-freecom
863[ 0.908064]@3 usbcore: registered new interface driver ums-isd200
864[ 0.908084]@3 usbcore: registered new interface driver ums-jumpshot
865[ 0.908103]@3 usbcore: registered new interface driver ums-karma
866[ 0.908122]@3 usbcore: registered new interface driver ums-sddr09
867[ 0.908141]@3 usbcore: registered new interface driver ums-sddr55
868[ 0.908160]@3 usbcore: registered new interface driver ums-usbat
869[ 0.908226]@3 usbcore: registered new interface driver usbserial
870[ 0.908252]@3 usbcore: registered new interface driver usb_ehset_test
871[ 0.908893]@3 gbridge_init: gbridge_init successs.
872[ 0.908999]@3 mousedev: PS/2 mouse device common for all mice
873[ 0.909130]@3 usbcore: registered new interface driver xpad
874[ 0.909139]@3 synaptics,s3320: tpd_driver_init enter
875[ 0.909898]@3 synaptics,s3320: before on cpu [3]
876[ 0.909910]@3 synaptics,s3320: check CPU[0] is [online]
877[ 0.910557]@3 touchkey,s1302: boot_time: before optimize [synaptics_ts_probe] on cpu 3
878[ 0.910571]@3 touchkey,s1302: boot_time: [synaptics_ts_probe] CPU0 is online
879[ 0.912513]@3 input: hbtp_vm as /devices/virtual/input/input1
880[ 0.913449]@3 switch_data->key3_gpio=1013
881[ 0.913472]@3 switch_data->key2_gpio=1012
882[ 0.913484]@3 switch_data->key1_gpio=1014
883[ 0.914782]@3 fpc1020_probe
884[ 0.915004]@3 fpc1020 soc:fpc_fpc1020: fpc,irq-gpio - gpio: 95
885[ 0.915039]@3 fpc1020 soc:fpc_fpc1020: fpc,reset-gpio - gpio: 86
886[ 0.915060]@3 fpc1020 soc:fpc_fpc1020: fpc,gpio_id0 - gpio: 25
887[ 0.915067]@3 fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id0_gpio=25)
888[ 0.915096]@3 fpc1020 soc:fpc_fpc1020: fpc,gpio_id1 - gpio: 143
889[ 0.915103]@3 fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id1_gpio=143)
890[ 0.915129]@3 fpc1020 soc:fpc_fpc1020: fpc,gpio_1V8_EN - gpio: 14
891[ 0.915239]@3 input: fpc1020 as /devices/virtual/input/input2
892[ 0.915495]@3 fpc1020 soc:fpc_fpc1020: requested irq 384
893[ 0.915553]@3 fpc1020 soc:fpc_fpc1020: fpc1020_probe: ok
894[ 0.916824]@3 qcom,qpnp-rtc qpnp-rtc-ffffffc175bc7800: rtc core: registered qpnp_rtc as rtc0
895[ 0.917007]@3 i2c /dev entries driver
896[ 0.949474]@3 vmem: Up and running with 4 banks of memory from [irq size 268614350025 64bit disabled]
897[ 0.963339]@3 msm_camera_pinctrl_init:1201 Getting pinctrl handle failed
898[ 0.963368]@3 msm_camera_power_up:1242 Initialization of pinctrl failed
899[ 0.963375]@3 msm_camera_request_gpio_table:732 invalid gpio_tbl 0000000000000000 / size 0
900[ 0.968780]@3 msm_cci_init:1366: hw_version = 0x10040000
901[ 0.969026]@3 msm_eeprom_imx298_read_vendorInfo read 0x0700=1
902[ 0.969034]@3 msm_eeprom_imx298_read_vendorInfo pdaf calibration is valid
903[ 0.969071]@3 qcom,slave-addr = 0xA0
904[ 0.978022]@3 qcom,slave-addr = 0xA0
905[ 0.986966]@3 qcom,slave-addr = 0xA0
906[ 0.995909]@3 qcom,slave-addr = 0xA0
907[ 1.004836]@3 qcom,slave-addr = 0xA0
908[ 1.013853]@3 qcom,slave-addr = 0xA0
909[ 1.022797]@3 qcom,slave-addr = 0xA0
910[ 1.031740]@3 qcom,slave-addr = 0xA0
911[ 1.040686]@3 qcom,slave-addr = 0xA0
912[ 1.052185]@0 msm_camera_request_gpio_table:732 invalid gpio_tbl 0000000000000000 / size 0
913[ 1.052646]@0 msm_camera_pinctrl_init:1201 Getting pinctrl handle failed
914[ 1.052654]@0 msm_camera_power_up:1242 Initialization of pinctrl failed
915[ 1.052661]@0 msm_camera_request_gpio_table:732 invalid gpio_tbl 0000000000000000 / size 0
916[ 1.057175]@0 msm_cci_init:1366: hw_version = 0x10040000
917[ 1.057409]@0 msm_eeprom_s5k3p8sp_read_sensorInfo read eeprom.sensor_id = 0x3b
918[ 1.057417]@0 qcom,slave-addr = 0xA2
919[ 1.066538]@0 qcom,slave-addr = 0xA2
920[ 1.067150]@0 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
921[ 1.067743]@0 scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
922[ 1.068576]@0 scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
923[ 1.069296]@0 scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
924[ 1.069858]@0 ufs_get_capacity_info size = 0xee60000
925scsi 0:0:0:0: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
926[ 1.070882]@0 scsi 0:0:0:1: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
927[ 1.071292]@0 scsi 0:0:0:2: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
928[ 1.071687]@0 scsi 0:0:0:3: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
929[ 1.072079]@0 scsi 0:0:0:4: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
930[ 1.072460]@0 scsi 0:0:0:5: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
931[ 1.073369]@1 sd 0:0:0:0: [sda] 16384-byte physical blocks
932[ 1.073931]@1 sd 0:0:0:1: [sdb] 16384-byte physical blocks
933[ 1.074266]@2 sd 0:0:0:2: [sdc] 16384-byte physical blocks
934[ 1.075468]@3 sd 0:0:0:3: [sdd] 16384-byte physical blocks
935[ 1.075995]@2 sd 0:0:0:4: [sde] 16384-byte physical blocks
936[ 1.076598]@0 sd 0:0:0:0: [sda] 16384-byte physical blocks
937[ 1.076953]@3 sd 0:0:0:5: [sdf] 16384-byte physical blocks
938[ 1.077200]@1 sd 0:0:0:1: [sdb] 16384-byte physical blocks
939[ 1.077724]@3 sd 0:0:0:2: [sdc] 16384-byte physical blocks
940[ 1.077755]@1 qcom,slave-addr = 0xA2
941[ 1.079499]@2 sd 0:0:0:3: [sdd] 16384-byte physical blocks
942[ 1.080944]@2 sd 0:0:0:5: [sdf] 16384-byte physical blocks
943[ 1.080978]@0 sd 0:0:0:4: [sde] 16384-byte physical blocks
944[ 1.082134]@1 sdb: sdb1
945[ 1.082237]@3 sdc: sdc1
946[ 1.082268]@0 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15
947[ 1.083005]@3 sd 0:0:0:2: [sdc] 16384-byte physical blocks
948[ 1.083108]@3 sd 0:0:0:1: [sdb] 16384-byte physical blocks
949[ 1.083653]@1 sdd: sdd1 sdd2 sdd3
950[ 1.084136]@3 sdf: sdf1 sdf2 sdf3 sdf4
951[ 1.084793]@3 sd 0:0:0:3: [sdd] 16384-byte physical blocks
952[ 1.084807]@0 sd 0:0:0:0: [sda] 16384-byte physical blocks
953[ 1.085488]@2 sd 0:0:0:5: [sdf] 16384-byte physical blocks
954[ 1.087358]@0 qcom,slave-addr = 0xA2
955[ 1.087995]@3 sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34
956[ 1.089588]@3 sd 0:0:0:4: [sde] 16384-byte physical blocks
957[ 1.096532]@0 qcom,slave-addr = 0xA2
958[ 1.105428]@0 qcom,slave-addr = 0xA2
959[ 1.114309]@0 qcom,slave-addr = 0xA2
960[ 1.123212]@0 qcom,slave-addr = 0xA2
961[ 1.132078]@0 qcom,slave-addr = 0xA2
962[ 1.140951]@1 qcom,slave-addr = 0xA2
963[ 1.149886]@1 qcom,slave-addr = 0xA2
964[ 1.158769]@1 qcom,slave-addr = 0xA2
965[ 1.167666]@1 qcom,slave-addr = 0xA2
966[ 1.176545]@1 qcom,slave-addr = 0xA2
967[ 1.185423]@1 qcom,slave-addr = 0xA2
968[ 1.194298]@1 qcom,slave-addr = 0xA2
969[ 1.200035]@0 synaptics,s3320: after on cpu [0]
970[ 1.200058]@0 synaptics,s3320: synaptics_ts_probe is called
971[ 1.200564]@0 synaptics,s3320: synaptics_parse_dts ts->support_hw_poweroff =1
972[ 1.200578]@0 synaptics,s3320: ts->enable2v8_gpio not specified
973[ 1.200585]@0 synaptics,s3320: ts->max_num not specified
974[ 1.200593]@0 synaptics,s3320: button-map not specified
975[ 1.200599]@0 synaptics,s3320: synaptics:button map readed is 0 0 0
976[ 1.200605]@0 synaptics,s3320: synaptics,tx-rx-num is 16 28
977[ 1.200613]@0 synaptics,s3320: synaptic:ts->irq_gpio:125 irq_flags:8200 max_num 10
978[ 1.201339]@0 synaptics,s3320: synaptics:enable the v1p8_gpio
979[ 1.203253]@1 qcom,slave-addr = 0xA2
980[ 1.210225]@0 touchkey,s1302: boot_time: after optimize call [synaptics_ts_probe] on cpu 0
981[ 1.210255]@0 touchkey,s1302: synaptics_ts_probe is called
982[ 1.212243]@1 qcom,slave-addr = 0xA2
983[ 1.221146]@1 qcom,slave-addr = 0xA2
984[ 1.230024]@1 qcom,slave-addr = 0xA2
985[ 1.238899]@1 qcom,slave-addr = 0xA2
986[ 1.247778]@1 qcom,slave-addr = 0xA2
987[ 1.256653]@1 qcom,slave-addr = 0xA2
988[ 1.265530]@1 qcom,slave-addr = 0xA2
989[ 1.268409]@0 msm_camera_request_gpio_table:732 invalid gpio_tbl 0000000000000000 / size 0
990[ 1.280132]@0 synaptics,s3320: synaptics:enable the reset_gpio
991[ 1.282641]@2 MSM-CPP cpp_init_hardware:844 CPP HW Version: 0x60000000
992[ 1.282660]@2 MSM-CPP cpp_init_hardware:862 stream_cnt:0
993[ 1.289600]@3 __msm_jpeg_init:1537] Jpeg Device id 0
994__msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
995msm_fd_hw_set_dt_parms_by_name: Error property does not exist
996[ 1.390045]@3 msm_fd aa4000.qcom,fd: Face detection halt timeout
997[ 1.390443]@0 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x19 (ok)
998synaptics,s3320: F12_2D_QUERY_BASE = 50
999 F12_2D_CMD_BASE = 0
1000 F12_2D_CTRL_BASE = 15
1001 F12_2D_DATA_BASE = 8
1002
1003synaptics,s3320: F01_RMI_QUERY_BASE = 33
1004 F01_RMI_CMD_BASE = 2a
1005 F01_RMI_CTRL_BASE = e
1006 F01_RMI_DATA_BASE = 6
1007 synaptics,s3320: F34_FLASH_QUERY_BASE = 2b
1008 F34_FLASH_CMD_BASE = 0
1009 F34_FLASH_CTRL_BASE = d
1010 F34_FLASH_DATA_BASE = 0
1011
1012synaptics,s3320: F51_CUSTOM_QUERY_BASE = 57
1013 F51_CUSTOM_CMD_BASE = 0
1014 F51_CUSTOM_CTRL_BASE = 19
1015 F51_CUSTOM_DATA_BASE = 0
1016 synaptics,s3320: F54_QUERY_BASE = 4d
1017 F54_CMD_BASE = 4c
1018 F54_CTRL_BASE = e
1019 F54_DATA_BASE = 0
1020
1021synaptics,s3320: before fw update bootloader_mode[0x0]
1022[ 1.392582]@0 synaptics,s3320: CURRENT_FIRMWARE_ID = 0x15801125
1023[ 1.392582]@3 SMBCHG: load_data: chip is NULL !
1024[ 1.392891]@3 SMBCHG: load_data: chip is NULL !
1025[ 1.392991]@3 FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
1026[ 1.393482]@0 synaptics,s3320: synatpitcs_fw: fw_name = tp/fw_synaptics_15801b.img,ts->manu_name:S3718AR
1027[ 1.393707]@2 BQ: bq27541_battery_probe: probe sucdess
1028[ 1.393928]@0 synaptics,s3320: synaptics_init_panel is called!
1029[ 1.394127]@2 i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x1a (ok)
1030synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1031[ 1.395977]@2 BQ: check_bat_type: is_4p4v_bat=1,support_4p4v_bat=1
1032[ 1.396018]@2 i2c-core: driver [bq27541-battery] using legacy suspend method
1033[ 1.396025]@2 i2c-core: driver [bq27541-battery] using legacy resume method
1034[ 1.396712]@2 FASTCHG: dash_probe: dash_probe
1035[ 1.397313]@0 synaptics,s3320: max_x = 1080,max_y = 1920; max_x_ic = 1079,max_y_ic = 1919
1036[ 1.397862]@0 synaptics,s3320: afte fw update,program memory self-check bootloader_mode = 0x0
1037[ 1.398662]@0 synaptics,s3320: synaptics_soft_reset !!!
1038[ 1.403151]@3 FG: fg_config_esr_extract: ESR extract is disabled
1039[ 1.430047]@0 FASTCHG: dash_probe: dash_probe success
1040[ 1.432162]@0 unable to find DT imem DLOAD mode node
1041[ 1.433907]@0 unable to find DT imem EDLOAD mode node
1042[ 1.435875]@0 unable to find DT imem dload-type node
1043[ 1.436638]@0 set_dload_mode ON
1044[ 1.466856]@3 device-mapper: uevent: version 1.0.3
1045[ 1.467003]@3 device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
1046[ 1.467095]@3 device-mapper: req-crypt: dm-req-crypt successfully initalized.
1047
1048[ 1.468538]@3 bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
1049[ 1.468668]@3 bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
1050[ 1.468675]@3 bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
1051[ 1.468682]@3 bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
1052[ 1.469258]@3 sdhci: Secure Digital Host Controller Interface driver
1053[ 1.469267]@3 sdhci: Copyright(c) Pierre Ossman
1054[ 1.469275]@3 sdhci-pltfm: SDHCI platform and OF driver helper
1055[ 1.473784]@3 hidraw: raw HID events driver (C) Jiri Kosina
1056[ 1.474129]@3 usbcore: registered new interface driver usbhid
1057[ 1.474138]@3 usbhid: USB HID core driver
1058[ 1.474475]@3 ashmem: initialized
1059[ 1.476323]@3 [mhi_init] Failed to create IPC logging context
1060[ 1.476710]@3 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
1061[ 1.484069]@3 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
1062[ 1.485197]@3 arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
1063[ 1.485237]@3 arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
1064[ 1.487332]@3 m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
1065[ 1.490948]@3 devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
1066[ 1.491054]@3 devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
1067[ 1.491149]@3 devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
1068[ 1.491236]@3 devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
1069[ 1.493300]@3 probe: Failed to create IPC log context
1070[ 1.494752]@3 otracer: initialized
1071[ 1.494856]@3 op_netlink_init
1072[ 1.494958]@3 usbcore: registered new interface driver snd-usb-audio
1073[ 1.497541]@3 tfa98xx_i2c_probe
1074[ 1.505668]@3 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
1075[ 1.505929]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
1076[ 1.505939]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1077[ 1.506066]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
1078[ 1.506075]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1079[ 1.506195]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
1080[ 1.506204]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1081[ 1.506324]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
1082[ 1.506332]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1083[ 1.506349]@3 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
1084[ 1.506468]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
1085[ 1.506476]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1086[ 1.506595]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
1087[ 1.506602]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Data Align from DT file qcom,msm-cpudai-tdm-data-align
1088[ 1.506612]@3 msm-dai-q6-tdm: probe of soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 failed with error -22
1089[ 1.506728]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
1090[ 1.506735]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Data Align from DT file qcom,msm-cpudai-tdm-data-align
1091[ 1.506742]@3 msm-dai-q6-tdm: probe of soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 failed with error -22
1092[ 1.506859]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
1093[ 1.506867]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1094[ 1.506884]@3 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
1095[ 1.507000]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
1096[ 1.507007]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1097[ 1.507130]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
1098[ 1.507139]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1099[ 1.507257]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
1100[ 1.507265]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1101[ 1.507383]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
1102[ 1.507391]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1103[ 1.507408]@3 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
1104[ 1.507525]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
1105[ 1.507533]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1106[ 1.507651]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
1107[ 1.507659]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1108[ 1.507780]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
1109[ 1.507788]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1110[ 1.507910]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
1111[ 1.507919]@3 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1112[ 1.509945]@3 msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
1113[ 1.517958]@3 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1114[ 1.518226]@3 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1115[ 1.519754]@3 GACT probability NOT on
1116[ 1.519770]@3 Mirror/redirect action on
1117[ 1.519784]@3 u32 classifier
1118[ 1.519788]@3 Actions configured
1119[ 1.519799]@3 Netfilter messages via NETLINK v0.30.
1120[ 1.519830]@3 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1121[ 1.519981]@3 ctnetlink v0.93: registering with nfnetlink.
1122[ 1.520280]@3 xt_time: kernel timezone is -0000
1123[ 1.520409]@3 ip_tables: (C) 2000-2006 Netfilter Core Team
1124[ 1.520475]@3 arp_tables: (C) 2002 David S. Miller
1125[ 1.520499]@3 TCP: cubic registered
1126[ 1.520504]@3 Initializing XFRM netlink socket
1127[ 1.520682]@3 NET: Registered protocol family 10
1128[ 1.521137]@3 mip6: Mobile IPv6
1129[ 1.521154]@3 ip6_tables: (C) 2000-2006 Netfilter Core Team
1130[ 1.521220]@3 sit: IPv6 over IPv4 tunneling driver
1131[ 1.521423]@3 NET: Registered protocol family 17
1132[ 1.521439]@3 NET: Registered protocol family 15
1133[ 1.521466]@3 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1134[ 1.521475]@3 Ebtables v2.0 registered
1135[ 1.521626]@3 Bluetooth: ffffffc1764bbcf0
1136Bluetooth: ffffffc1764bbcd0Bluetooth: ffffffc1764bbd10
1137Bluetooth: ffffffc1764bbcf0Bluetooth: ffffffc1764bbcf0
1138Bluetooth: ffffffc1764bbcd0Bluetooth: ffffffc1764bbd40
1139Bluetooth: ffffffc1764bbd20l2tp_core: L2TP core driver, V2.0
1140[ 1.521713]@3 l2tp_ppp: PPPoL2TP kernel driver, V2.0
1141[ 1.521719]@3 l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1142[ 1.521733]@3 l2tp_netlink: L2TP netlink interface
1143[ 1.521750]@3 l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1144[ 1.521763]@3 l2tp_debugfs: L2TP debugfs support
1145[ 1.521769]@3 l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1146[ 1.522543]@3 NET: Registered protocol family 27
1147[ 1.522584]@3 IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [local_IPCRTR]
1148kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
1149[ 1.532550]@0 sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006b04000
1150sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006b04000
1151sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006b04000
1152sps:BAM 0x0000000006b04000 is registered.qpnp-smbcharger qpnp-smbcharger-ffffffc175be9c00: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1153[ 1.534108]@0 SMBCHG: qpnp_battery_temp_region_set: set temp_region = 5
1154[ 1.534190]@0 smbcharger_charger_otg: no parameters
1155[ 1.534294]@0 smbcharger_external_otg: no parameters
1156[ 1.534318]@0 smbcharger_external_otg: supplied by pmi8994_boost_5v
1157[ 1.534387]@0 SMBCHG: smbchg_hw_init: enable APSD
1158[ 1.534427]@0 SMBCHG: smbchg_hw_init: disabe HVDCP
1159[ 1.534620]@0 SMBCHG: smbchg_charging_en: enable=1
1160[ 1.534713]@0 SMBCHG: smbchg_charging_en: enable=1
1161[ 1.534735]@0 SMBCHG: smbchg_usb_suspend: suspend=0
1162[ 1.535068]@0 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 500, set to 500
1163[ 1.560344]@0 SMBCHG: src_detect_handler: chip->usb_present = 0 usb_present = 1 src_detect = 1 hvdcp_3_det_ignore_uv=0
1164[ 1.560381]@0 SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
1165[ 1.560385]@0 SMBCHG: smbchg_charging_en: enable=1
1166[ 1.560409]@0 FG: oneplus_set_allow_read_iic: set allow read extern fg iic fail
1167[ 1.560415]@0 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500, typeC_support_current_ma = 4000
1168[ 1.570279]@0 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x47 !
1169[ 1.570477]@0 synaptics,s3320: synaptics_input_init is called
1170[ 1.570580]@0 input: synaptics,s3320 as /devices/soc/75ba000.i2c/i2c-12/12-0020/input/input3
1171[ 1.573759]@0 msm-usb-ssphy-qmp 7410000.ssphy: QMP PHY initialization timeout
1172[ 1.573766]@0 msm-usb-ssphy-qmp 7410000.ssphy: USB3_PHY_PCS_STATUS:69696969
1173[ 1.573874]@0 msm-dwc3 6a00000.ssusb: dwc3_otg_sm_work line:3530 usage_count:1
1174[ 1.573890]@0 msm-dwc3 6a00000.ssusb: Not in P3,aborting LPM sequence
1175[ 1.573895]@0 msm-dwc3 6a00000.ssusb: dwc3_otg_sm_work line:3533 usage_count:0
1176[ 1.574011]@1 oem_test_id ret:1, otg_switch:0, otg_state:1
1177[ 1.574018]@1 msm-dwc3 6a00000.ssusb: dwc3_otg_sm_work line:3576 usage_count:1
1178[ 1.574025]@1 msm-dwc3 6a00000.ssusb: dwc3_otg_start_peripheral line:3282 usage_count:2
1179[ 1.574116]@1 SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
1180[ 1.574122]@1 SMBCHG: smbchg_charging_en: enable=1
1181[ 1.574145]@1 FG: oneplus_set_allow_read_iic: set allow read extern fg iic fail
1182[ 1.574355]@1 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1183[ 1.574429]@1 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1184[ 1.574629]@1 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = -22, online = 1
1185[ 1.575255]@1 msm-dwc3 6a00000.ssusb: dwc3_otg_start_peripheral line:3309 usage_count:3
1186[ 1.575266]@1 oem_test_id ret:1, otg_switch:0, otg_state:3
1187[ 1.590925]@1 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1188[ 1.591333]@1 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1189[ 1.591393]@1 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1190[ 1.591465]@1 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1191[ 1.593804]@0 qpnp-smbcharger qpnp-smbcharger-ffffffc175be9c00: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1192[ 1.594253]@1 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1193[ 1.594590]@0 qpnp-smbcharger qpnp-smbcharger-ffffffc175be9c00: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
1194[ 1.595920]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1195[ 1.596204]@0 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1196[ 1.596606]@0 tusb320 7-0060: tusb320_probe
1197[ 1.596917]@0 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x22 (ok)
1198i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x60 MSTR_STS:0x0d1300c8 OPER:0x00000010
1199[ 1.597060]@0 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1200[ 1.597124]@0 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1201[ 1.597180]@0 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1202[ 1.597250]@0 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1203[ 1.597392]@0 tusb320_read_reg:reg(0x0), ret(-107)
1204[ 1.597398]@0 tusb320 7-0060: DEV_ID(0x0)!= 0x30
1205[ 1.597411]@0 tusb320: probe of 7-0060 failed with error -22
1206[ 1.597461]@0 fusb301 7-0021: fusb301_probe
1207[ 1.597769]@0 fusb301 7-0021: fusb301_gpio_configure OK!
1208[ 1.598375]@1 fusb301 7-0021: fusb301_probe OK!
1209[ 1.598432]@1 ptn5150 7-001d: ptn5150_probe
1210[ 1.598487]@0 i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1d MSTR_STS:0x091343c8 OPER:0x00000010
1211[ 1.598511]@1 ptn5150_read_reg: i2c read error: -5
1212[ 1.598517]@1 ptn5150 7-001d: DEV_ID(0x00)!= 0x0b || 0x09
1213[ 1.598527]@1 ptn5150: probe of 7-001d failed with error -22
1214[ 1.599837]@1 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1215[ 1.599948]@0 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1216[ 1.600200]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1217[ 1.600859]@3 Creating CPU group 0
1218[ 1.600865]@3 Init CPU0 state
1219[ 1.600869]@3 Init CPU1 state
1220[ 1.600967]@3 Creating CPU group 2
1221[ 1.600971]@3 Init CPU2 state
1222[ 1.600974]@3 Init CPU3 state
1223[ 1.618121]@3 project_info_init_sysfs success
1224[ 1.626119]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1225[ 1.626397]@0 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1226[ 1.626962]@3 ngd_msm_ctrl 91c0000.slim: error creating ipc_logging context
1227[ 1.627811]@3 RNDIS_IPA module is loaded.
1228file system registered
1229[ 1.628568]@3 mbim_init: initialize 1 instances
1230[ 1.628603]@3 mbim_init: Initialized 1 ports
1231[ 1.628703]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1232[ 1.628986]@0 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1233[ 1.629320]@3 rndis_qc_init: initialize rndis QC instance
1234[ 1.629420]@3 Number of LUNs=8
1235[ 1.629427]@3 Mass Storage Function, version: 2009/09/11
1236[ 1.629431]@3 LUN: removable file: (no medium)
1237[ 1.629442]@3 Number of LUNs=1
1238[ 1.629465]@3 LUN: removable read only CD-ROM file: (no medium)
1239[ 1.629469]@3 Number of LUNs=1
1240[ 1.629582]@3 android_usb gadget: android_usb ready
1241[ 1.630059]@0 synaptics,s3320: synaptic:ts->irq is 414
1242[ 1.630467]@1 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
1243[ 1.630479]@1 synaptics,s3320: synaptics_init_panel is called!
1244[ 1.630737]@1 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1245[ 1.631111]@3 input: gpio-keys as /devices/soc/soc:gpio_keys/input/input4
1246[ 1.631516]@1 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1247[ 1.631774]@3 qcom,qpnp-rtc qpnp-rtc-ffffffc175bc7800: setting system clock to 1970-01-14 05:02:27 UTC (1141347)
1248[ 1.631808]@1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1249[ 1.633649]@1 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1250[ 1.633739]@3 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1251[ 1.633990]@1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1252[ 1.635710]@1 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1253[ 1.635998]@1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1254[ 1.637807]@1 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1255[ 1.638106]@1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1256[ 1.639456]@3 lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
1257[ 1.639697]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
1258[ 1.639823]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
1259[ 1.639943]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
1260[ 1.640095]@0 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
1261[ 1.640235]@2 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1262[ 1.640245]@0 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
1263[ 1.640374]@0 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
1264[ 1.640498]@0 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
1265[ 1.640508]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1266[ 1.642986]@2 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1267[ 1.643291]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1268[ 1.643318]@0 parse_cpu_levels: idx 1 545
1269[ 1.643326]@0 parse_cpu_levels: idx 2 1785
1270[ 1.643329]@0 parse_cpu_levels: idx 2 3025
1271[ 1.643380]@0 parse_cpu_levels: idx 1 545
1272[ 1.643384]@0 parse_cpu_levels: idx 2 1785
1273[ 1.643387]@0 parse_cpu_levels: idx 2 3025
1274[ 1.645745]@2 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1275[ 1.646032]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1276[ 1.646161]@0 qcom,qpnp-flash-led qpnp-flash-led-ffffffc175bebc00: Unable to acquire pinctrl
1277[ 1.647342]@0 rmnet_ipa started initialization
1278[ 1.647355]@0 IPA SSR support = True
1279[ 1.647359]@0 IPA ipa-loaduC = True
1280[ 1.647363]@0 IPA SG support = True
1281[ 1.648133]@2 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1282[ 1.648425]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1283[ 1.648551]@3 ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1284[ 1.648559]@3 ipa ipa_uc_state_check:296 uC is not loaded
1285[ 1.649235]@3 rmnet_ipa completed initialization
1286[ 1.650516]@0 synaptics,s3320: synaptics_ts_probe: going to create files--tp_fw_update
1287[ 1.650633]@0 synaptics,s3320: synaptics_ts_probe 3203: normal end
1288[ 1.650758]@2 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1289[ 1.651026]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1290[ 1.652143]@3 qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1291[ 1.652936]@3 rome_vreg: disabling
1292[ 1.652946]@3 gdsc_mmagic_bimc: disabling
1293[ 1.652982]@3 kryo1-retention: disabling
1294[ 1.652986]@3 kryo0-retention: disabling
1295[ 1.652990]@3 gfx_mem_acc_corner: disabling
1296[ 1.652993]@3 apcc_l3_mem_acc_corner: disabling
1297[ 1.652997]@3 apc1_perfcl_mem_acc_corner: disabling
1298[ 1.653000]@3 apc0_pwrcl_mem_acc_corner: disabling
1299[ 1.653009]@3 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1300[ 1.653234]@3 clock_late_init: Removing enables held for handed-off clocks
1301[ 1.653667]@2 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1302[ 1.653950]@2 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1303[ 1.656763]@3 ALSA device list:
1304[ 1.656768]@3 No soundcards found.
1305[ 1.656818]@3 Warning: unable to open an initial console.
1306[ 1.657035]@3 Freeing unused kernel memory: 484K (ffffffc0011c4000 - ffffffc00123d000)
1307[ 1.657044]@3 Freeing alternatives memory: 28K (ffffffc00123d000 - ffffffc001244000)
1308[ 1.657708]@3 init: init started!
1309[ 1.658096]@3 SELinux: security_load_policy, ss_initialized: 0
1310[ 1.720084]@3 SELinux: security_load_policy, sidtab.shutdown: 0
1311[ 1.722612]@3 audit: type=1403 audit(1141347.579:2): policy loaded auid=4294967295 ses=4294967295
1312[ 1.722927]@3 audit: type=1404 audit(1141347.579:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
1313[ 1.733685]@0 sps: BAM device 0x0000000007584000 is not registered yet.
1314[ 1.733720]@0 sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000007584000
1315sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000007584000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000007584000
1316sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000007584000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000007584000
1317sps:BAM 0x0000000007584000 is registered.sps:BAM 0x0000000007584000 (va:0xffffff8004500000) enabled: ver:0x19, number of pipes:24
1318[ 1.740199]@3 init: (Initializing SELinux enforcing took 0.08s.)
1319[ 1.749419]@3 init: init second stage started!
1320[ 1.760353]@0 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x24 (ok)
1321touchkey,s1302: product id is s1302
1322[ 1.761319]@0 touchkey,s1302: F11_2D_QUERY_BASE = 95
1323 F11_2D_CMD_BASE = 6e
1324 F11_2D_CTRL_BASE = 3d
1325 F11_2D_DATA_BASE = 15
1326
1327touchkey,s1302: CURRENT_FIRMWARE_ID = 0x4
1328[ 1.762817]@0 touchkey,s1302: before fw update,bootloader_mode = 0x0
1329[ 1.762926]@0 input: HWK,synaptics,s1302 as /devices/soc/75b6000.i2c/i2c-8/8-0020/input/input5
1330[ 1.770092]@1 get_param_by_index_and_offset[75] sid_index = 7 offset = 24 buf = ffffffc1766f3d20 length = 4
1331[ 1.770103]@1 SMBCHG: charger_type_record: charger_type_record: charger_type_record: param_value = 1|0|0,dash_on=124,dash_present=0
1332[ 1.770109]@1 set_param_by_index_and_offset[99]sid_index = 7 offset = 28 buf = ffffffc1766f3d48 length = 4
1333[ 1.770152]@1 open file /dev/block/bootdevice/by-name/param failed.(-2)
1334[ 1.770157]@1 Error write param partition.(-2)
1335[ 1.770161]@1 set_param_charger_type_value[882] failed!
1336[ 1.770165]@1 set_param_by_index_and_offset[99]sid_index = 7 offset = 32 buf = ffffffc1766f3d4c length = 4
1337[ 1.770174]@1 open file /dev/block/bootdevice/by-name/param failed.(-2)
1338[ 1.770179]@1 Error write param partition.(-2)
1339[ 1.770182]@1 set_param_charger_type_value[882] failed!
1340[ 1.770186]@1 set_param_by_index_and_offset[99]sid_index = 7 offset = 36 buf = ffffffc1766f3d50 length = 4
1341[ 1.770195]@1 open file /dev/block/bootdevice/by-name/param failed.(-2)
1342[ 1.770199]@1 Error write param partition.(-2)
1343[ 1.770203]@1 set_param_charger_type_value[882] failed!
1344[ 1.770206]@1 set_param_by_index_and_offset[99]sid_index = 7 offset = 40 buf = ffffffc1766f3d54 length = 4
1345[ 1.770215]@1 open file /dev/block/bootdevice/by-name/param failed.(-2)
1346[ 1.770218]@1 Error write param partition.(-2)
1347[ 1.770221]@1 set_param_charger_type_value[882] failed!
1348[ 1.770225]@1 set_param_by_index_and_offset[99]sid_index = 7 offset = 44 buf = ffffffc1766f3d58 length = 4
1349[ 1.770233]@1 open file /dev/block/bootdevice/by-name/param failed.(-2)
1350[ 1.770236]@1 Error write param partition.(-2)
1351[ 1.770239]@1 set_param_charger_type_value[882] failed!
1352[ 1.770242]@1 set_param_by_index_and_offset[99]sid_index = 7 offset = 24 buf = ffffffc1766f3d20 length = 4
1353[ 1.770250]@1 open file /dev/block/bootdevice/by-name/param failed.(-2)
1354[ 1.770254]@1 Error write param partition.(-2)
1355[ 1.770257]@1 set_param_charger_type_count[867] failed!
1356[ 1.860038]@0 touchkey,s1302: synaptic:ts->irq is 421
1357[ 1.860179]@0 touchkey,s1302: touchkey using poll status:0
1358[ 1.860506]@0 touchkey,s1302: synaptics_soft_reset !!!
1359[ 1.860540]@0 touchkey,s1302: create nodes is successe!
1360[ 1.860613]@0 touchkey,s1302: synaptics_ts_probe s1302: normal end
1361[ 1.860618]@0 touchkey,s1302: boot_time: synaptics_ts_probe return 0
1362[ 1.869972]@2 init: waitpid failed: No child processes
1363[ 1.870116]@2 init: (Loading properties from /default.prop took 0.00s.)
1364[ 1.870343]@2 init: Normal boot or recovery
1365[ 1.870886]@2 init: (Parsing /init.environ.rc took 0.00s.)
1366[ 1.870985]@2 init: (Parsing /init.usb.rc took 0.00s.)
1367[ 1.871291]@2 init: /init.qcom.rc: 539: user option requires a user id
1368[ 1.871709]@2 init: (Parsing init.oem.rc took 0.00s.)
1369[ 1.871773]@2 init: (Parsing init.oem.debug.rc took 0.00s.)
1370[ 1.872529]@2 init: (Parsing init.qcom.usb.rc took 0.00s.)
1371[ 1.872694]@2 init: init.target.rc: 229: ignored duplicate definition of service 'perfd'
1372[ 1.872841]@2 init: (Parsing init.target.rc took 0.00s.)
1373[ 1.872976]@2 init: (Parsing init.qcom.factory.rc took 0.00s.)
1374[ 1.872987]@2 init: (Parsing /init.qcom.rc took 0.00s.)
1375[ 1.873108]@2 init: (Parsing /init.usb.configfs.rc took 0.00s.)
1376[ 1.873145]@2 init: (Parsing /init.zygote64_32.rc took 0.00s.)
1377[ 1.873190]@2 init: (Parsing /init.trace.rc took 0.00s.)
1378[ 1.873199]@2 init: (Parsing /init.rc took 0.00s.)
1379[ 1.873304]@2 init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
1380[ 1.873342]@2 init: Starting service 'ueventd'...
1381[ 1.873864]@2 init: Waiting for /dev/.coldboot_done...
1382[ 1.874668]@3 ueventd: ueventd started!
1383[ 1.995132]@3 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1384[ 2.052393]@3 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1385[ 2.052494]@3 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1386[ 2.055220]@3 SMBCHG: load_data: stored_soc[0xc9], shutdown_soc[100]
1387[ 2.154875]@1 synaptics,s3320: start get base data:1
1388[ 2.154890]@1 synaptics,s3320: tp_baseline_get start!
1389[ 2.185991]@3 ueventd: Coldboot took 0.30s.
1390[ 2.186613]@0 init: Waiting for /dev/.coldboot_done took 0.31s.
1391[ 2.187125]@0 keychord: using input dev qpnp_pon for fevent
1392[ 2.187136]@0 keychord: using input dev fpc1020 for fevent
1393[ 2.187143]@0 keychord: using input dev gpio-keys for fevent
1394[ 2.190715]@0 init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
1395[ 2.190746]@0 init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory
1396[ 2.190766]@0 init: write_file: Unable to open '/proc/sys/kernel/sched_tunable_scaling': No such file or directory
1397[ 2.190784]@0 init: write_file: Unable to open '/proc/sys/kernel/sched_latency_ns': No such file or directory
1398[ 2.190802]@0 init: write_file: Unable to open '/proc/sys/kernel/sched_wakeup_granularity_ns': No such file or directory
1399[ 2.190821]@0 init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
1400[ 2.191586]@0 init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
1401[ 2.193438]@0 Registered swp emulation handler
1402[ 2.198986]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts: barrier=1,discard
1403[ 2.199065]@3 fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
1404[ 2.199996]@3 fs_mgr: fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/bootdevice/by-name/userdata for mount /data type f2fs )
1405[ 2.200114]@3 get_param_by_index_and_offset[75] sid_index = 12 offset = 408 buf = ffffffc17308b100 length = 4
1406[ 2.200122]@3 get_param_by_index_and_offset[75] sid_index = 12 offset = 412 buf = ffffffc17308b100 length = 4
1407[ 2.200443]@3 init: check_remount_status: system partiiton path: /dev/block/bootdevice/by-name/system
1408[ 2.200540]@3 init: s_mtime = 1480122615, Sat Nov 26 01:10:15 2016
1409[ 2.200599]@3 set_param_by_index_and_offset[99]sid_index = 10 offset = 24 buf = ffffffc17308b900 length = 4
1410[ 2.201385]@3 set_param_by_index_and_offset[99]sid_index = 10 offset = 28 buf = ffffffc17308b700 length = 4
1411[ 2.204399]@0 fs_mgr: Unable to open zram conf device /sys/block/zram0/disksize
1412[ 2.206490]@0 init: Starting service 'exec 0 (/system/bin/e2fsck)'...
1413[ 2.230374]@2 init: Service 'exec 0 (/system/bin/e2fsck)' (pid 438) exited with status 0
1414[ 2.231421]@3 EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: barrier=1
1415[ 2.231470]@3 init: ext4:Mounted /dev/block/bootdevice/by-name/cache on /cache successfully!
1416[ 2.231639]@3 init: Starting service 'exec 1 (/system/bin/e2fsck)'...
1417[ 2.246814]@3 init: Service 'exec 1 (/system/bin/e2fsck)' (pid 441) exited with status 0
1418[ 2.247980]@3 EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1
1419[ 2.248031]@3 init: ext4:Mounted /dev/block/bootdevice/by-name/persist on /persist successfully!
1420[ 2.250480]@3 EXT4-fs (sde12): mounted filesystem with ordered data mode. Opts: barrier=1
1421[ 2.250525]@3 init: ext4:Mounted /dev/block/bootdevice/by-name/dsp on /dsp successfully!
1422[ 2.252397]@3 init: Starting service 'logd'...
1423[ 2.265642]@3 init: (Loading properties from /system/build.prop took 0.01s.)
1424[ 2.265701]@3 init: (Loading properties from /vendor/build.prop took 0.00s.)
1425[ 2.265719]@3 init: (Loading properties from /factory/factory.prop took 0.00s.)
1426[ 2.265815]@3 init: /recovery not specified in fstab
1427[ 2.266773]@2 init: Starting service 'vold'...
1428[ 2.266775]@0 logd.auditd: start
1429[ 2.266796]@0 logd.klogd: 2266772081
1430[ 2.267296]@2 init: Not bootcharting.
1431[ 2.272684]@2 init: Starting service 'exec 2 (/system/bin/tzdatacheck)'...
1432[ 2.280467]@0 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x47 !
1433[ 2.280860]@0 synaptics,s3320: tp_baseline_get end!
1434[ 2.281387]@0 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
1435[ 2.281400]@0 synaptics,s3320: synaptics_init_panel is called!
1436[ 2.281755]@1 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1437[ 2.283405]@2 init: Service 'exec 2 (/system/bin/tzdatacheck)' (pid 453) exited with status 0
1438[ 2.289423]@2 init: Starting service 'logd-reinit'...
1439[ 2.289796]@2 init: write_file: Unable to open '/sys/block/dm-0/queue/read_ahead_kb': No such file or directory
1440[ 2.289811]@2 init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
1441[ 2.289820]@2 init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
1442[ 2.289831]@2 init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
1443[ 2.289839]@2 init: cannot expand '${persist.sys.mba_boot_timeout}' while writing to '/sys/module/pil_msa/parameters/pbl_mba_boot_timeout_ms'
1444[ 2.289849]@2 init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
1445[ 2.289857]@2 init: cannot expand '${persist.sys.modem_auth_timeout}' while writing to '/sys/module/pil_msa/parameters/modem_auth_timeout_ms'
1446[ 2.289868]@2 init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
1447[ 2.289880]@2 init: cannot expand '${persist.sys.pil_proxy_timeout}' while writing to '/sys/module/peripheral_loader/parameters/proxy_timeout_ms'
1448[ 2.291019]@1 subsys-pil-tz 9300000.qcom,lpass: adsp: loading from 0x000000008ea00000 to 0x0000000090400000
1449[ 2.298877]@0 logd.daemon: reinit
1450[ 2.398455]@2 BQ: bq27541_hw_config: DEVICE_TYPE is 0x541, FIRMWARE_VERSION is 0x200
1451[ 2.398469]@2 BQ: bq27541_hw_config: Complete bq27541 configuration 0x604B
1452[ 2.544300]@2 subsys-pil-tz 9300000.qcom,lpass: adsp: Brought out of reset
1453[ 2.554917]@1 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1454[ 2.555206]@1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1455[ 2.561443]@1 IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [lpass_IPCRTR]
1456msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1457[ 2.562666]@3 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1458[ 2.565731]@2 subsys-pil-tz 9300000.qcom,lpass: adsp: Power/Clock ready interrupt received
1459[ 2.565754]@0 subsys-pil-tz 9300000.qcom,lpass: Subsystem error monitoring/handling services are up
1460[ 2.565781]@2 L-Notify: Generel: 7
1461[ 2.565797]@3 sysmon_send_event_no_qmi: Message sending failed -19
1462[ 2.566455]@3 sysmon_send_event_no_qmi: Message sending failed -19
1463[ 2.568426]@3 subsys-pil-tz 1c00000.qcom,ssc: slpi: loading from 0x0000000090400000 to 0x0000000090e00000
1464[ 2.576070]@0 apr_tal:Q6 Is Up
1465[ 2.579222]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1466[ 2.579603]@0 msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered
1467[ 2.673242]@0 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
1468[ 2.673975]@1 diag: In diag_send_feature_mask_update, control channel is not open, p: 1, ffffffc0015f2480
1469[ 2.680835]@0 sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000009184000
1470sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000009184000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000009184000
1471sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000009184000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000009184000
1472sps:BAM 0x0000000009184000 (va:0xffffff8004480000) enabled: ver:0x19, number of pipes:31
1473[ 2.680941]@0 sps:BAM 0x0000000009184000 is registered.
1474wcd9335-slim tasha-slim-pgd: Platform data from device tree
1475[ 2.682061]@1 wcd9335-slim tasha-slim-pgd: cdc-vdd-buck: vol=[1800000 1800000]uV, curr=[650000]uA, ond 0
1476[ 2.682076]@1 wcd9335-slim tasha-slim-pgd: cdc-buck-sido: vol=[1800000 1800000]uV, curr=[250000]uA, ond 0
1477[ 2.682088]@1 wcd9335-slim tasha-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
1478[ 2.682100]@1 wcd9335-slim tasha-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
1479[ 2.682112]@1 wcd9335-slim tasha-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
1480[ 2.682118]@1 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-ldoh-v property in node /soc/slim@91c0000/tasha_codec failed
1481wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt1-mv property in node /soc/slim@91c0000/tasha_codec failed
1482wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt2-mv property in node /soc/slim@91c0000/tasha_codec failed
1483wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt3-mv property in node /soc/slim@91c0000/tasha_codec failed
1484wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias1-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
1485wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias2-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
1486wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias3-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
1487wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias4-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
1488wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-dmic-clk-drv-strength property in node /soc/slim@91c0000/tasha_codec failed, err = -22
1489wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_probe: codec type is 2
1490[ 2.683178]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1491[ 2.683554]@0 msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered
1492[ 2.691712]@2 subsys-pil-tz 1c00000.qcom,ssc: slpi: Brought out of reset
1493[ 2.733242]@1 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1494[ 2.733607]@1 msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered
1495[ 2.740322]@1 slimbus:1 laddr:0xcb, EAPC:0x1:0xa0
1496slimbus:1 laddr:0xca, EAPC:0x0:0xa0wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_device_up: slim device up, dev_up = 1
1497[ 2.740754]@2 wcd9335-slim tasha-slim-pgd: wcd9335_bring_up: wcd9335 codec version is v2.0
1498[ 2.740801]@1 IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [dsps_IPCRTR]
1499wcd9335-slim tasha-slim-pgd: wcd9xxx_check_codec_type: detected tasha_codec, major 0x107, minor 0x1, ver 0x2
1500[ 2.741700]@1 wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4
1501[ 2.741794]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1502[ 2.742217]@0 msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered
1503[ 2.744223]@2 subsys-pil-tz 1c00000.qcom,ssc: slpi: Power/Clock ready interrupt received
1504[ 2.744248]@0 subsys-pil-tz 1c00000.qcom,ssc: Subsystem error monitoring/handling services are up
1505[ 2.744751]@3 sysmon_send_event_no_qmi: Message sending failed -19
1506[ 2.744758]@3 sysmon_send_event_no_qmi: Message sending failed -19
1507[ 2.744765]@3 sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: SLPI image is loaded
1508[ 2.744946]@3 init: Service 'logd-reinit' (pid 456) exited with status 0
1509[ 2.745130]@3 init: Starting service 'exec 3 (/init.qcom.early_boot.sh)'...
1510[ 2.745347]@1 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and slpi's SSCTL service
1511[ 2.745472]@1 diag: In diag_send_feature_mask_update, control channel is not open, p: 3, ffffffc0015f2570
1512[ 2.752845]@1 tasha_codec tasha_codec: tasha_probe: Tasha driver probe done
1513[ 2.754019]@0 msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1514[ 2.755145]@0 tasha_codec tasha_codec: tasha_codec_probe()
1515[ 2.767349]@1 tasha_codec tasha_codec: tasha_handle_pdata: dmic_clk_strength invalid, default = 2
1516[ 2.774827]@0 random: nonblocking pool is initialized
1517[ 2.864438]@3 init: Service 'exec 3 (/init.qcom.early_boot.sh)' (pid 472) exited with status 0
1518[ 2.865790]@3 init: Starting service 'healthd'...
1519[ 2.866041]@3 init: Starting service 'dashd'...
1520[ 2.866430]@3 init: Starting service 'lmkd'...
1521[ 2.866838]@3 init: Starting service 'servicemanager'...
1522[ 2.867277]@3 init: Starting service 'surfaceflinger'...
1523[ 2.867376]@2 binder: 501:501 transaction failed 29189, size 0-0
1524[ 2.867678]@3 init: Starting service 'qcom-c_core-sh'...
1525[ 2.868078]@3 init: Starting service 'irsc_util'...
1526[ 2.868519]@3 init: Starting service 'rmt_storage'...
1527[ 2.868791]@3 init: cannot find '/system/bin/rfs_access', disabling 'rfs_access'
1528[ 2.868908]@3 init: Starting service 'config_bluetooth'...
1529[ 2.869249]@3 init: Starting service 'sensor-sh'...
1530[ 2.869620]@3 init: Starting service 'cs-early-boot'...
1531[ 2.869853]@0 dashd: dashd_main enterd
1532[ 2.869884]@0 dashd: run /sbin/dashd ENGINE START!
1533[ 2.869884]@3 init: Starting service 'self-init'...
1534[ 2.870281]@3 init: Starting service 'oem_early_boot'...
1535[ 2.870337]@0 dashd: dash_4p4v_firmware_data detected
1536[ 2.870363]@0 FASTCHG: dash_dev_write: fw_ver_count = 5644
1537[ 2.870734]@3 init: Starting service 'oemlogkit'...
1538[ 2.871129]@3 init: Starting service 'qcom-usb-sh'...
1539[ 2.871551]@3 init: Starting service 'per_mgr'...
1540[ 2.871944]@3 init: Starting service 'mdm_launcher'...
1541[ 2.872390]@3 init: Starting service 'qseecomd'...
1542[ 2.875232]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
1543[ 2.875267]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
1544[ 2.875286]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
1545[ 2.875305]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
1546[ 2.875325]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
1547[ 2.875346]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
1548[ 2.875365]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
1549[ 2.875383]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
1550[ 2.875403]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
1551[ 2.875424]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
1552[ 2.875443]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
1553[ 2.875463]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
1554[ 2.875483]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
1555[ 2.875502]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
1556[ 2.875522]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
1557[ 2.875540]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
1558[ 2.875558]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
1559[ 2.875577]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
1560[ 2.875597]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
1561[ 2.875616]@3 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
1562[ 2.875955]@3 init: property_set("ro.nfc.port", "I2C") failed
1563[ 2.876118]@3 init: SELinux: Could not get canonical path /dev/dash restorecon: Permission denied.
1564[ 2.876195]@0 type=1400 audit(1141348.729:4): avc: denied { getattr } for pid=1 comm="init" path="/dev/dash" dev="tmpfs" ino=16049 scontext=u:r:init:s0 tcontext=u:object_r:input_device:s0 tclass=chr_file permissive=0
1565[ 2.876733]@3 synaptics,s3320: start update ******* fw_name:tp/fw_synaptics_15801b.img,ts->manu_name:S3718AR
1566[ 2.876744]@3 synaptics,s3320: synatpitcs_fw_update is called
1567[ 2.906653]@2 synaptics,s3320: F34_query_base_addr[0x2b],F34_ctrl_base_addr[0xd],F34_data_base_addr[0x0]
1568[ 2.915344]@2 synaptics,s3320: fwu_parse_partition_table: Partition entry 0:
1569[ 2.915359]@2 synaptics,s3320: fwu_parse_partition_table: Partition entry 1:
1570[ 2.915363]@2 synaptics,s3320: fwu_parse_partition_table: Device config block count: 1
1571[ 2.915368]@2 synaptics,s3320: fwu_parse_partition_table: Partition entry 2:
1572[ 2.915372]@2 synaptics,s3320: fwu_parse_partition_table: Flash config block count: 128
1573[ 2.915376]@2 synaptics,s3320: fwu_parse_partition_table: Partition entry 3:
1574[ 2.915380]@2 synaptics,s3320: fwu_parse_partition_table: Global parameters block count: 128
1575[ 2.915385]@2 synaptics,s3320: fwu_parse_partition_table: Partition entry 4:
1576[ 2.915388]@2 synaptics,s3320: fwu_parse_partition_table: Core code block count: 7296
1577[ 2.915392]@2 synaptics,s3320: fwu_parse_partition_table: Partition entry 5:
1578[ 2.915397]@2 synaptics,s3320: fwu_parse_partition_table: Core config block count: 128
1579[ 2.915402]@2 synaptics,s3320: fwu_parse_partition_table: Partition entry 6:
1580[ 2.915406]@2 synaptics,s3320: fwu_parse_partition_table: Guest code block count: 4096
1581[ 2.915410]@2 synaptics,s3320: fwu_parse_partition_table: Partition entry 7:
1582[ 2.915413]@2 synaptics,s3320: fwu_parse_partition_table: Guest serialization block count: 32
1583[ 2.915417]@2 synaptics,s3320: fwu_parse_partition_table: Partition entry 8:
1584[ 2.915421]@2 synaptics,s3320: fwu_start_reflash_check: fwu_read_f34_serialization
1585[ 2.921038]@2 synaptics,s3320: fwu_read_f34_serialization:buffer5[0x0b]
1586[ 2.921053]@2 synaptics,s3320: fwu_read_f34_serialization:tp hardware version is 15801vb
1587[ 2.921077]@2 synaptics,s3320: synatpitcs_fw_update:first check hardware version 0
1588[ 2.921082]@2 synaptics,s3320: enter version 15801 vb update mode
1589[ 2.941220]@2 synaptics,s3320: synapitcs_ts_update is called
1590[ 2.941969]@2 synaptics,s3320: 15801CURRENT_FW_ID:15801125vB----, FW_ID:15801125vB----,FW_NAME:tp/fw_synaptics_15801b.img
1591[ 2.942522]@1 synaptics,s3320: synaptics_init_panel is called!
1592[ 2.943163]@1 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1593[ 2.944584]@1 touchkey,s1302: start update ******* fw_name:tp/fw_synaptics_touchkey.img
1594[ 2.988516]@3 touchkey,s1302: use firmware version[4], image firmware version[4]
1595[ 2.989811]@3 init: Service 'qcom-c_core-sh' (pid 506) exited with status 0
1596[ 2.990076]@3 init: Service 'irsc_util' (pid 507) exited with status 0
1597[ 2.990240]@3 init: Service 'cs-early-boot' (pid 511) exited with status 127
1598[ 2.990373]@3 init: Service 'oem_early_boot' (pid 513) exited with status 0
1599[ 2.990512]@3 init: Service 'mdm_launcher' (pid 517) exited with status 0
1600[ 2.996374]@0 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for INT_FM_TX --> INTERNAL_FM_TX --> SEC_MI2S_RX Port Mixer
1601[ 2.996395]@0 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route INT_FM_TX -> INTERNAL_FM_TX -> SEC_MI2S_RX Port Mixer
1602[ 2.996589]@3 init: cannot find '/system/bin/rfs_access', disabling 'rfs_access'
1603[ 2.997116]@3 init: write_file: Unable to open '/sys/devices/soc/75ba000.i2c/i2c-12/12-0020/input/input0/update_fw': No such file or directory
1604[ 2.997680]@3 init: write_file: Unable to open 'sys/kernel/debug/dynamic_debug/control': No such file or directory
1605[ 2.998614]@3 init: property_set("ro.sf.lcd_density", "480") failed
1606[ 3.000010]@3 init: Starting service 'defaultcrypto'...
1607[ 3.001550]@3 init: write_file: Unable to open '/sys/class/service_locator/service_locator_status': No such file or directory
1608[ 3.001659]@3 init: Service 'self-init' (pid 512) exited with status 0
1609[ 3.002064]@3 init: Starting service 'ppd'...
1610[ 3.002811]@3 init: Starting service 'per_proxy'...
1611[ 3.003327]@3 enable_store: android_usb: already disabled
1612[ 3.021144]@0 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer
1613[ 3.021168]@0 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer
1614[ 3.021295]@0 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer
1615[ 3.021312]@0 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer
1616[ 3.035811]@3 ipa ipa_uc_state_check:296 uC is not loaded
1617[ 3.035835]@3 ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1618[ 3.049899]@3 init: Starting service 'sensors'...
1619[ 3.051450]@3 init: Service 'sensor-sh' (pid 510) exited with status 0
1620[ 3.051650]@2 kgsl: _read_fw2_block_header: GPMU unknown header ID 6
1621[ 3.054402]@0 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SEC_MI2S_TX --> SEC_MI2S_TX --> SLIMBUS_0_RX Port Mixer
1622[ 3.054423]@0 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> SLIMBUS_0_RX Port Mixer
1623[ 3.056529]@0 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
1624[ 3.056547]@0 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
1625[ 3.060980]@0 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX
1626[ 3.060997]@0 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX
1627[ 3.076592]@0 msm8996-asoc-snd soc:sound-9335: control 2:0:0:TERT_MI2S_RX Port Mixer SLIM_0_TX:0 is already present
1628[ 3.076615]@0 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: failed to add widget TERT_MI2S_RX Port Mixer dapm kcontrol TERT_MI2S_RX Port Mixer SLIM_0_TX: -16
1629[ 3.077264]@0 msm8996-asoc-snd soc:sound-9335: control 2:0:0:SEC_MI2S_RX Port Mixer SLIM_0_TX:0 is already present
1630[ 3.077284]@0 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: failed to add widget SEC_MI2S_RX Port Mixer dapm kcontrol SEC_MI2S_RX Port Mixer SLIM_0_TX: -16
1631[ 3.151363]@0 devfreq soc:qcom,kgsl-busmon: Couldn't update frequency transition information.
1632[ 3.153038]@3 init: Service 'qcom-usb-sh' (pid 515) exited with status 0
1633[ 3.194845]@3 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to create SEC_MI2S_RX Port Mixer debugfs file
1634[ 3.216005]@3 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths
1635[ 3.226631]@3 init: Starting service 'bootanim'...
1636[ 3.227310]@1 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen on
1637[ 3.227336]@1 synaptics,s3320: fb_notifier_callback blank[0],event[0x10]
1638[ 3.227355]@1 synaptics,s3320: fb_notifier_callback blank[0],event[0x9]
1639[ 3.398339]@3 i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0x25 (ok)
1640msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: no source widget found for SLIMBUS_2_RX
1641[ 3.414996]@1 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: Failed to add route SLIMBUS_2_RX -> direct -> Slimbus2 Playback
1642[ 3.415079]@1 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: no sink widget found for SLIMBUS_2_TX
1643[ 3.415090]@1 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: Failed to add route Slimbus2 Capture -> direct -> SLIMBUS_2_TX
1644[ 3.790494]@1 mdss_dsi_on:srgb mode 0
1645[ 3.790512]@1 mdss_dsi_on:srgb mode 0
1646[ 3.790526]@1 mdss_dsi_on:srgb mode 0
1647[ 3.870368]@2 BQ: bq27541_battery_soc: bq27541_battery_soc = 100
1648[ 4.146280]@0 IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [mpss_IPCRTR]
1649[ 4.158151]@0 M-Notify: General: 7
1650[ 4.201554]@2 QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -65,app_id = 0,lstr = 12288
1651[ 4.285853]@3 QSEECOM: qseecom_create_key: Set the key successfully
1652[ 4.287961]@0 device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
1653[ 4.287981]@0 device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
1654[ 4.415535]@1 diag: In diag_send_feature_mask_update, control channel is not open, p: 0, ffffffc0015f2408
1655[ 4.578602]@1 ipa-wan handle_indication_req:131 not send indication
1656[ 4.580093]@1 ipa ipa_uc_response_hdlr:456 IPA uC loaded
1657[ 4.580123]@1 ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1658[ 4.582114]@1 ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1659[ 4.583054]@1 ipa ipa_uc_wdi_event_log_info_handler:338 WDI stats ofst=0x45130
1660[ 4.583082]@1 ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1661[ 4.949197]@1 dashd: CREATE THREAD!
1662[ 4.949232]@3 dashd: THREAD running
1663[ 4.949282]@3 dashd: dash read
1664[ 4.964385]@1 dashd: type=USB, soc=100, temp=30, vbat=4301, ibat=338
1665[ 5.849956]@1 init: Starting service 'logd-reinit'...
1666[ 7.141086]@3 init: property_set("ro.ril.svlte1x", "false") failed
1667[ 7.141289]@3 init: property_set("ro.ril.svdo", "false") failed
1668[ 7.206786]@3 init: property_set("ro.ril.supportLTE", "1") failed
1669[ 7.559422]@1 imx298 probe succeeded
1670[ 7.608742]@1 s5k3p8sp probe succeeded
1671[ 7.627995]@0 msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
1672[ 7.631247]@0 msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
1673[ 7.936043]@3 MSM-CPP cpp_init_hardware:862 stream_cnt:0
1674[ 8.013308]@0 msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
1675[ 8.018996]@1 MSM-CPP cpp_init_hardware:862 stream_cnt:0
1676[ 8.250357]@0 msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
1677[ 8.274530]@2 MSM-CPP cpp_init_hardware:862 stream_cnt:0
1678[ 10.727662]@0 touchkey,s1302: synaptics_s1302_key_reverse_write key_reverse:1
1679[ 11.426304]@3 msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
1680[ 11.428097]@3 msm_pcm_volume_ctl_get substream runtime not found
1681[ 11.428196]@3 msm_pcm_volume_ctl_get substream runtime not found
1682[ 11.428288]@3 msm_pcm_volume_ctl_get substream runtime not found
1683[ 11.428571]@3 msm_pcm_volume_ctl_get substream runtime not found
1684[ 11.429096]@3 msm_pcm_volume_ctl_get substream runtime not found
1685[ 11.513458]@3 call_set_cals: set_cal failed!
1686[ 11.519941]@3 core_set_license: Invalid cal block to send
1687msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
1688[ 11.656164]@2 msm_pcm_volume_ctl_get substream runtime not found
1689[ 11.656261]@2 msm_pcm_volume_ctl_get substream runtime not found
1690[ 11.656366]@2 msm_pcm_volume_ctl_get substream runtime not found
1691[ 11.656653]@2 msm_pcm_volume_ctl_get substream runtime not found
1692[ 11.657262]@2 msm_pcm_volume_ctl_get substream runtime not found
1693[ 11.660779]@2 tasha_codec tasha_codec: tasha_mad_input_put: mic bias source not found for input = DMIC1
1694[ 12.796512]@2 ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1695[ 12.797887]@2 ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1696[ 12.800631]@2 ipa-wan ipa_wwan_ioctl:1509 get AGG size 8192 count 10
1697[ 12.801518]@2 ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1698[ 12.803259]@0 ipa ipa_assign_policy:2943 get close-by 8192
1699[ 12.803327]@0 ipa ipa_assign_policy:2949 set rx_buff_sz 7680
1700[ 12.803332]@0 ipa ipa_assign_policy:2971 set aggr_limit 6
1701[ 12.813662]@0 ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data0) register to IPA
1702[ 12.835016]@2 ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data1) register to IPA
1703[ 12.865536]@1 ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data2) register to IPA
1704[ 12.878827]@2 synaptics,s3320: tp_gesture_write_func write [0xc1]
1705[ 12.905491]@3 ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data3) register to IPA
1706[ 12.937200]@2 ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data4) register to IPA
1707[ 12.977648]@0 ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data5) register to IPA
1708[ 13.004665]@0 ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data6) register to IPA
1709[ 13.040613]@3 ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data7) register to IPA
1710[ 13.166976]@1 ol_transfer_codeswap_struct: failed to get codeswap structure
1711[ 13.192366]@2 __ol_transfer_bin_file: Failed to get bdwlan30.b00
1712[20161125_20:11:02.511496]@2 init: cannot setexeccon('u:r:qti-testscripts:s0'): Invalid argument
1713[20161125_20:11:02.540615]@3 msm8996_quat_mi2s_snd_startup
1714[20161125_20:11:02.545032]@0 afe_send_custom_topology_block: AFE SVC cal has invalid size: 0!
1715[20161125_20:11:02.545537]@0 afe_send_custom_topology: No cal sent for cal_index 7! ret -22
1716[20161125_20:11:02.555450]@0 state: 0
1717[20161125_20:11:02.556108]@0 tfa98xx_dsp_quickstart(): tfa98xx_dsp_quickstart cold boot forcecoldboot =0
1718[20161125_20:11:02.559667]@0 tfaRunSpeakerQuickBoost(): coldstart
1719[20161125_20:11:02.564227]@1 audit: rate limit exceeded
1720[20161125_20:11:02.568600]@2 Unhandled fault: alignment fault (0x96000021) at 0xffffff8000b11003
1721[20161125_20:11:02.568616]@2 Internal error: : 96000021 [#1] PREEMPT SMP
1722[20161125_20:11:02.568622]@2 Modules linked in: wlan(C)
1723[20161125_20:11:02.568636]@2 CPU: 2 PID: 1593 Comm: AudioOut_6 Tainted: G C 3.18.20-~Tyranus.R1.3T.UBER4.9 #1
1724[20161125_20:11:02.568641]@2 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro + PMI8996 MTP (DT)
1725[20161125_20:11:02.568646]@2 task: ffffffc0ac840000 ti: ffffffc0ac848000 task.ti: ffffffc0ac848000
1726[20161125_20:11:02.568658]@2 PC is at tfaRunWriteRegister+0x50/0x84
1727[20161125_20:11:02.568664]@2 LR is at tfaRunWriteRegister+0x50/0x84
1728[20161125_20:11:02.568668]@2 pc : [<ffffffc000992e28>] lr : [<ffffffc000992e28>] pstate: 60000145
1729[20161125_20:11:02.568672]@2 sp : ffffffc0ac84b930
1730[20161125_20:11:02.568676]@2 x29: ffffffc0ac84b930 x28: 0000000000000000
1731[20161125_20:11:02.568685]@2 x27: ffffffc0009593d8 x26: ffffffc1732200f0
1732[20161125_20:11:02.568693]@2 x25: ffffffc0b4c7f400 x24: ffffff8000011068
1733[20161125_20:11:02.568701]@2 x23: ffffff8000011000 x22: ffffffc0b4c2d818
1734[20161125_20:11:02.568709]@2 x21: ffffff8000011068 x20: ffffffc0b4c69400
1735[20161125_20:11:02.568718]@2 x19: ffffff8000b11000 x18: 0000007f930fdc00
1736[20161125_20:11:02.568725]@2 x17: 0000007fa06b5e98 x16: ffffffc00018b9cc
1737[20161125_20:11:02.568733]@2 x15: 0000000000000000 x14: 0000007f9d08355c
1738[20161125_20:11:02.568740]@2 x13: 0000000000000000 x12: 0000000000000001
1739[20161125_20:11:02.568747]@2 x11: 000000000001aeb8 x10: 0000000001312d00
1740[20161125_20:11:02.568755]@2 x9 : ffffffc0ac84b310 x8 : ffffffc0ac8405c0
1741[20161125_20:11:02.568763]@2 x7 : 00000000fffffffa x6 : 0000000000000000
1742[20161125_20:11:02.568771]@2 x5 : 000000000124f800 x4 : 0000000000000000
1743[20161125_20:11:02.568779]@2 x3 : 0000000000000000 x2 : 0000000000000001
1744[20161125_20:11:02.568786]@2 x1 : ffffffc000509524 x0 : 0000000000000b5d
1745[20161125_20:11:02.568794]@2
1746PC: 0xffffffc000992d28:
1747[20161125_20:11:02.568798]@2 2d28 913ce000 9102e021 9408dbec d3483f16 aa1703e0 2a1603e1 d3441f13 97ff2e4b
1748[20161125_20:11:02.568820]@2 2d48 2a0003f9 12000f02 52800025 11000442 1ac220a2 51000442 1ad32042 1ad32293
1749[20161125_20:11:02.568840]@2 2d68 0a220002 b948d2a0 2a130053 53003e73 340001a0 2a1803e0 94000d86 aa0003e2
1750[20161125_20:11:02.568861]@2 2d88 90001c21 90003cc0 91382021 913d9c00 9102e021 2a1403e3 53003f24 2a1303e5
1751[20161125_20:11:02.568882]@2 2da8 9408dbce 2a1603e1 2a1303e2 aa1703e0 97ff2e51 f94023f9 52800000 a94153f3
1752[20161125_20:11:02.568902]@2 2dc8 a9425bf5 a94363f7 a8c57bfd d65f03c0 a9be7bfd 910003fd a90153f3 aa0103f3
1753[20161125_20:11:02.568923]@2 2de8 f9400814 b0006700 b948d000 34000140 90001c21 90003cc0 91382021 39400262
1754[20161125_20:11:02.568944]@2 2e08 78401263 913e3c00 78403264 91034021 9408dbb2 39400261 aa1403e0 97ff2e13
1755[20161125_20:11:02.568965]@2 2e28 78403262 78401261 0a220000 0a010042 39400261 53003c03 aa1403e0 2a020062
1756[20161125_20:11:02.568987]@2 2e48 97ff2e2d 52800000 a94153f3 a8c27bfd d65f03c0 a9be7bfd 90001c21 910003fd
1757[20161125_20:11:02.569007]@2 2e68 a90153f3 91382021 52800b54 f9400813 9103a021 90003cc0 aa0103e2 913ef400
1758[20161125_20:11:02.569027]@2 2e88 9408db96 528b4d62 aa1303e0 52800801 97ff2e19 aa1303e0 52801161 97ff2df3
1759[20161125_20:11:02.569049]@2 2ea8 53003c02 4a140042 aa1303e0 52800c01 97ff2e11 2a1403e2 aa1303e0 52800161
1760[20161125_20:11:02.569070]@2 2ec8 97ff2e0d aa1303e0 52801021 529f0002 97ff2e09 aa1303e0 52801041 52808282
1761[20161125_20:11:02.569090]@2 2ee8 97ff2e05 aa1303e0 52801081 5287e802 97ff2e01 aa1303e0 528010a1 52800002
1762[20161125_20:11:02.569110]@2 2f08 97ff2dfd aa1303e0 528010c1 52800002 97ff2df9 aa1303e0 528010e1 52800002
1763[20161125_20:11:02.569131]@2
1764LR: 0xffffffc000992d28:
1765[20161125_20:11:02.569134]@2 2d28 913ce000 9102e021 9408dbec d3483f16 aa1703e0 2a1603e1 d3441f13 97ff2e4b
1766[20161125_20:11:02.569155]@2 2d48 2a0003f9 12000f02 52800025 11000442 1ac220a2 51000442 1ad32042 1ad32293
1767[20161125_20:11:02.569177]@2 2d68 0a220002 b948d2a0 2a130053 53003e73 340001a0 2a1803e0 94000d86 aa0003e2
1768[20161125_20:11:02.569197]@2 2d88 90001c21 90003cc0 91382021 913d9c00 9102e021 2a1403e3 53003f24 2a1303e5
1769[20161125_20:11:02.569218]@2 2da8 9408dbce 2a1603e1 2a1303e2 aa1703e0 97ff2e51 f94023f9 52800000 a94153f3
1770[20161125_20:11:02.569239]@2 2dc8 a9425bf5 a94363f7 a8c57bfd d65f03c0 a9be7bfd 910003fd a90153f3 aa0103f3
1771[20161125_20:11:02.569258]@2 2de8 f9400814 b0006700 b948d000 34000140 90001c21 90003cc0 91382021 39400262
1772[20161125_20:11:02.569278]@2 2e08 78401263 913e3c00 78403264 91034021 9408dbb2 39400261 aa1403e0 97ff2e13
1773[20161125_20:11:02.569300]@2 2e28 78403262 78401261 0a220000 0a010042 39400261 53003c03 aa1403e0 2a020062
1774[20161125_20:11:02.569322]@2 2e48 97ff2e2d 52800000 a94153f3 a8c27bfd d65f03c0 a9be7bfd 90001c21 910003fd
1775[20161125_20:11:02.569343]@2 2e68 a90153f3 91382021 52800b54 f9400813 9103a021 90003cc0 aa0103e2 913ef400
1776[20161125_20:11:02.569364]@2 2e88 9408db96 528b4d62 aa1303e0 52800801 97ff2e19 aa1303e0 52801161 97ff2df3
1777[20161125_20:11:02.569387]@2 2ea8 53003c02 4a140042 aa1303e0 52800c01 97ff2e11 2a1403e2 aa1303e0 52800161
1778[20161125_20:11:02.569408]@2 2ec8 97ff2e0d aa1303e0 52801021 529f0002 97ff2e09 aa1303e0 52801041 52808282
1779[20161125_20:11:02.569432]@2 2ee8 97ff2e05 aa1303e0 52801081 5287e802 97ff2e01 aa1303e0 528010a1 52800002
1780[20161125_20:11:02.569455]@2 2f08 97ff2dfd aa1303e0 528010c1 52800002 97ff2df9 aa1303e0 528010e1 52800002
1781[20161125_20:11:02.569476]@2
1782SP: 0xffffffc0ac84b830:
1783[20161125_20:11:02.569480]@2 b830 00000000 00000000 0124f800 00000000 00000000 00000000 fffffffa 00000000
1784[20161125_20:11:02.569503]@2 b850 ac8405c0 ffffffc0 ac84b310 ffffffc0 01312d00 00000000 0001aeb8 00000000
1785[20161125_20:11:02.569526]@2 b870 00000001 00000000 00000000 00000000 9d08355c 0000007f 00000000 00000000
1786[20161125_20:11:02.569546]@2 b890 0018b9cc ffffffc0 a06b5e98 0000007f 930fdc00 0000007f 00b11000 ffffff80
1787[20161125_20:11:02.569566]@2 b8b0 b4c69400 ffffffc0 00011068 ffffff80 b4c2d818 ffffffc0 00011000 ffffff80
1788[20161125_20:11:02.569587]@2 b8d0 00011068 ffffff80 b4c7f400 ffffffc0 732200f0 ffffffc1 009593d8 ffffffc0
1789[20161125_20:11:02.569606]@2 b8f0 00000000 00000000 ac84b930 ffffffc0 00992e28 ffffffc0 ac84b930 ffffffc0
1790[20161125_20:11:02.569627]@2 b910 00992e28 ffffffc0 60000145 00000000 00011068 ffffff80 b4c2d818 00000b5d
1791[20161125_20:11:02.569646]@2 b930 ac84b950 ffffffc0 009964b8 ffffffc0 00000000 00000000 00000000 00000000
1792[20161125_20:11:02.569668]@2 b950 ac84b9a0 ffffffc0 0099392c ffffffc0 b4c2d818 ffffffc0 00000009 00000000
1793[20161125_20:11:02.569690]@2 b970 01673000 ffffffc0 b4c69400 ffffffc0 00000000 00000000 00000000 00000000
1794[20161125_20:11:02.569710]@2 b990 009593d8 ffffffc0 00000000 00000000 ac84b9f0 ffffffc0 009956e8 ffffffc0
1795[20161125_20:11:02.569731]@2 b9b0 00000000 00000000 00d16000 ffffffc0 b4c2d818 ffffffc0 00d17340 ffffffc0
1796[20161125_20:11:02.569752]@2 b9d0 00000000 00000000 0124f800 00000000 00000000 00000000 fffffffa 00000000
1797[20161125_20:11:02.569773]@2 b9f0 ac84ba30 ffffffc0 00995900 ffffffc0 b4c2d818 ffffffc0 00000000 00000000
1798[20161125_20:11:02.569795]@2 ba10 00000000 00000000 00000000 00000000 b4c2d818 ffffffc0 00000000 00000000
1799[20161125_20:11:02.569815]@2
1800[20161125_20:11:02.569820]@2 Process AudioOut_6 (pid: 1593, stack limit = 0xffffffc0ac848060)
1801[20161125_20:11:02.569824]@2 Call trace:
1802[20161125_20:11:02.569834]@2 [<ffffffc000992e28>] tfaRunWriteRegister+0x50/0x84
1803[20161125_20:11:02.569840]@2 [<ffffffc0009964b4>] tfaContWriteRegsProf+0xd8/0x10c
1804[20161125_20:11:02.569845]@2 [<ffffffc000993928>] tfa98xx_startup+0x28c/0x3f0
1805[20161125_20:11:02.569850]@2 [<ffffffc0009956e4>] tfaRunSpeakerQuickBoost+0xc0/0x1e8
1806[20161125_20:11:02.569855]@2 [<ffffffc0009958fc>] tfa98xx_dsp_quickstart+0xf0/0x1a4
1807[20161125_20:11:02.569860]@2 [<ffffffc0009921f4>] tfa98xx_digital_mute+0x58/0x78
1808[20161125_20:11:02.569869]@2 [<ffffffc00094b180>] snd_soc_dai_digital_mute+0x34/0x48
1809[20161125_20:11:02.569876]@2 [<ffffffc0009593ac>] soc_pcm_prepare+0x1e0/0x20c
1810[20161125_20:11:02.569881]@2 [<ffffffc00095c83c>] dpcm_be_dai_prepare_async+0x114/0x164
1811[20161125_20:11:02.569886]@2 [<ffffffc00095c97c>] dpcm_fe_dai_prepare+0xf0/0x1b8
1812[20161125_20:11:02.569894]@2 [<ffffffc00092dde4>] snd_pcm_do_prepare+0x18/0x44
1813[20161125_20:11:02.569900]@2 [<ffffffc00092d8dc>] snd_pcm_action_single+0x40/0x84
1814[20161125_20:11:02.569904]@2 [<ffffffc00092d970>] snd_pcm_action_nonatomic+0x50/0x74
1815[20161125_20:11:02.569910]@2 [<ffffffc0009303d8>] snd_pcm_common_ioctl1+0x4bc/0xc40
1816[20161125_20:11:02.569915]@2 [<ffffffc000930e20>] snd_pcm_playback_ioctl1+0x2c4/0x2e0
1817[20161125_20:11:02.569920]@2 [<ffffffc00093164c>] snd_pcm_ioctl_compat+0x224/0x84c
1818[20161125_20:11:02.569927]@2 [<ffffffc0001d13b4>] compat_SyS_ioctl+0x10c/0x1434
1819[20161125_20:11:02.569932]@2 Code: 9408dbb2 39400261 aa1403e0 97ff2e13 (78403262)
1820[20161125_20:11:02.569938]@2 ---[ end trace 6341a87e67ba8fe2 ]---
1821[20161125_20:11:02.571527]@0 msm_thermal:hotplug_notify tsens_tz_sensor11 reach temp threshold: 650