· 4 years ago · Sep 03, 2021, 09:36 AM
1Current working dir /home/user/vitis-workspace/zedboard-hls-test/zedboard_20_base_2021_1_system/Emulation-SW/package
2Required emulation files like qemu_args exists
3WARNING: Image format was not specified for '/home/user/vitis-workspace/zedboard-hls-test/zedboard_20_base_2021_1_system/Emulation-SW/package/sd_card.img' and probing guessed raw.
4 Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
5 Specify the 'raw' format explicitly to remove the restrictions.
6
7qemu-system-aarch64: info: QEMU waiting for connection on: disconnected:tcp:127.0.0.1:8342,server
8
9qemu-system-aarch64: warning: nic ethernet@e000c000 has no peer
10
11
12
13U-Boot 2021.01 (Jun 01 2021 - 11:54:06 +0000)
14
15Model: Zynq Zed Development Board
16DRAM: ECC disabled 512 MiB
17Flash: 0 Bytes
18NAND: 0 MiB
19MMC: mmc@e0100000: 0
20Loading Environment from FAT... *** Warning - bad CRC, using default environment
21
22In: serial@e0001000
23Out: serial@e0001000
24Err: serial@e0001000
25Net:
26ZYNQ GEM: e000b000, mdio bus e000b000, phyaddr 0, interface rgmii-id
27Could not get PHY for eth0: addr 0
28No ethernet found.
29
30Hit any key to stop autoboot: 2 1 0
31switch to partitions #0, OK
32mmc0 is current device
33Scanning mmc 0:1...
34Found U-Boot script /boot.scr
352595 bytes read in 14 ms (180.7 KiB/s)
36## Executing script at 03000000
37Trying to load boot images from mmc0
384611696 bytes read in 375 ms (11.7 MiB/s)
39## Loading kernel from FIT Image at 10000000 ...
40 Using 'conf-system-top.dtb' configuration
41 Verifying Hash Integrity ... OK
42 Trying 'kernel-1' kernel subimage
43 Description: Linux kernel
44 Type: Kernel Image
45 Compression: uncompressed
46 Data Start: 0x100000f8
47 Data Size: 4589000 Bytes = 4.4 MiB
48 Architecture: ARM
49 OS: Linux
50 Load Address: 0x00200000
51 Entry Point: 0x00200000
52 Hash algo: sha256
53 Hash value: 219a17c8486701a0713405c927be2ecc9aa60c29effb1d4a82b879d187cc16e4
54 Verifying Hash Integrity ... sha256+ OK
55## Loading fdt from FIT Image at 10000000 ...
56 Using 'conf-system-top.dtb' configuration
57 Verifying Hash Integrity ... OK
58 Trying 'fdt-system-top.dtb' fdt subimage
59 Description: Flattened Device Tree blob
60 Type: Flat Device Tree
61 Compression: uncompressed
62 Data Start: 0x104607cc
63 Data Size: 20798 Bytes = 20.3 KiB
64 Architecture: ARM
65 Hash algo: sha256
66 Hash value: 06089a6ea4434b671c21874f1eb0c887c395981831625c6f413ad0eba4f34a12
67 Verifying Hash Integrity ... sha256+ OK
68 Booting using the fdt blob at 0x104607cc
69
70ZYNQ GEM: e000b000, mdio bus e000b000, phyaddr 0, interface rgmii-id
71Could not get PHY for eth0: addr 0
72 Loading Kernel Image
73 Loading Device Tree to 1eade000, end 1eae613d ... OK
74
75Starting kernel ...
76
77Booting Linux on physical CPU 0x0
78Linux version 5.10.0-xilinx-v2021.1 (oe-user@oe-host) (arm-xilinx-linux-gnueabi-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.1) #1 SMP PREEMPT Fri Jun 4 15:57:16 UTC 2021
79CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c5387d
80CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
81OF: fdt: Machine model: Zynq Zed Development Board
82earlycon: cdns0 at MMIO 0xe0001000 (options '115200n8')
83printk: bootconsole [cdns0] enabled
84Memory policy: Data cache writealloc
85cma: Reserved 16 MiB at 0x1f000000
86Zone ranges:
87 Normal [mem 0x0000000000000000-0x000000001fffffff]
88 HighMem empty
89Movable zone start for each node
90Early memory node ranges
91 node 0: [mem 0x0000000000000000-0x000000001fffffff]
92Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
93percpu: Embedded 15 pages/cpu s32332 r8192 d20916 u61440
94Built 1 zonelists, mobility grouping on. Total pages: 129920
95Kernel command line: earlycon root=/dev/mmcblk0p2 rw
96Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
97Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
98mem auto-init: stack:off, heap alloc:off, heap free:off
99Memory: 490460K/524288K available (7168K kernel code, 269K rwdata, 1868K rodata, 1024K init, 161K bss, 17444K reserved, 16384K cma-reserved, 0K highmem)
100rcu: Preemptible hierarchical RCU implementation.
101rcu: RCU event tracing is enabled.
102rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
103 Trampoline variant of Tasks RCU enabled.
104rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
105rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
106NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
107efuse mapped to (ptrval)
108slcr mapped to (ptrval)
109GIC physical location is 0xf8f01000
110irq-xilinx: /amba_pl/interrupt-controller@41800000: num_irq=32, sw_irq=0, edge=0x1
111L2C: platform modifies aux control register: 0x00000000 -> 0x30400000
112L2C: DT/platform modifies aux control register: 0x00000000 -> 0x30400000
113L2C-310 errata 588369 769419 enabled
114L2C-310 full line of zeros enabled for Cortex-A9
115L2C-310 cache controller enabled, 8 ways, 64 kB
116L2C-310: CACHE_ID 0x00000000, AUX_CTRL 0x00000000
117random: get_random_bytes called from start_kernel+0x2c0/0x4a0 with crng_init=0
118zynq_clock_init: clkc starts at (ptrval)
119Zynq clock init
120global-timer: non support for this cpu version.
121Failed to initialize '/axi/timer@f8f00200': -38
122Console: colour dummy device 80x30
123printk: console [tty0] enabled
124printk: bootconsole [cdns0] disabled
125Booting Linux on physical CPU 0x0
126Linux version 5.10.0-xilinx-v2021.1 (oe-user@oe-host) (arm-xilinx-linux-gnueabi-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.1) #1 SMP PREEMPT Fri Jun 4 15:57:16 UTC 2021
127CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c5387d
128CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
129OF: fdt: Machine model: Zynq Zed Development Board
130earlycon: cdns0 at MMIO 0xe0001000 (options '115200n8')
131printk: bootconsole [cdns0] enabled
132Memory policy: Data cache writealloc
133cma: Reserved 16 MiB at 0x1f000000
134Zone ranges:
135 Normal [mem 0x0000000000000000-0x000000001fffffff]
136 HighMem empty
137Movable zone start for each node
138Early memory node ranges
139 node 0: [mem 0x0000000000000000-0x000000001fffffff]
140Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
141percpu: Embedded 15 pages/cpu s32332 r8192 d20916 u61440
142Built 1 zonelists, mobility grouping on. Total pages: 129920
143Kernel command line: earlycon root=/dev/mmcblk0p2 rw
144Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
145Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
146mem auto-init: stack:off, heap alloc:off, heap free:off
147Memory: 490460K/524288K available (7168K kernel code, 269K rwdata, 1868K rodata, 1024K init, 161K bss, 17444K reserved, 16384K cma-reserved, 0K highmem)
148rcu: Preemptible hierarchical RCU implementation.
149rcu: RCU event tracing is enabled.
150rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
151 Trampoline variant of Tasks RCU enabled.
152rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
153rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
154NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
155efuse mapped to (ptrval)
156slcr mapped to (ptrval)
157GIC physical location is 0xf8f01000
158irq-xilinx: /amba_pl/interrupt-controller@41800000: num_irq=32, sw_irq=0, edge=0x1
159L2C: platform modifies aux control register: 0x00000000 -> 0x30400000
160L2C: DT/platform modifies aux control register: 0x00000000 -> 0x30400000
161L2C-310 errata 588369 769419 enabled
162L2C-310 full line of zeros enabled for Cortex-A9
163L2C-310 cache controller enabled, 8 ways, 64 kB
164L2C-310: CACHE_ID 0x00000000, AUX_CTRL 0x00000000
165random: get_random_bytes called from start_kernel+0x2c0/0x4a0 with crng_init=0
166zynq_clock_init: clkc starts at (ptrval)
167Zynq clock init
168global-timer: non support for this cpu version.
169Failed to initialize '/axi/timer@f8f00200': -38
170Console: colour dummy device 80x30
171printk: console [tty0] enabled
172printk: bootconsole [cdns0] disabled
173sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
174Calibrating delay loop... 2629.63 BogoMIPS (lpj=13148160)
175pid_max: default: 32768 minimum: 301
176Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
177Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
178CPU: Testing write buffer coherency: ok
179CPU0: Spectre v2: using BPIALL workaround
180CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
181Setting up static identity map for 0x100000 - 0x100060
182rcu: Hierarchical SRCU implementation.
183smp: Bringing up secondary CPUs ...
184CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
185CPU1: Spectre v2: using BPIALL workaround
186smp: Brought up 1 node, 2 CPUs
187SMP: Total of 2 processors activated (5364.12 BogoMIPS).
188CPU: All CPU(s) started in SVC mode.
189devtmpfs: initialized
190VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 0
191clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
192futex hash table entries: 512 (order: 3, 32768 bytes, linear)
193pinctrl core: initialized pinctrl subsystem
194NET: Registered protocol family 16
195DMA: preallocated 256 KiB pool for atomic coherent allocations
196thermal_sys: Registered thermal governor 'step_wise'
197cpuidle: using governor menu
198OF: amba_device_add() failed (-19) for /axi/etb@f8801000
199OF: amba_device_add() failed (-19) for /axi/tpiu@f8803000
200OF: amba_device_add() failed (-19) for /axi/funnel@f8804000
201OF: amba_device_add() failed (-19) for /axi/ptm@f889c000
202OF: amba_device_add() failed (-19) for /axi/ptm@f889d000
203hw-breakpoint: debug architecture 0x4 unsupported.
204zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0x(ptrval)
205e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 32, base_baud = 992063) is a xuartps
206printk: console [ttyPS0] enabled
207vgaarb: loaded
208SCSI subsystem initialized
209usbcore: registered new interface driver usbfs
210usbcore: registered new interface driver hub
211usbcore: registered new device driver usb
212mc: Linux media interface: v0.10
213videodev: Linux video capture interface: v2.00
214pps_core: LinuxPPS API ver. 1 registered
215pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
216PTP clock support registered
217EDAC MC: Ver: 3.0.0
218FPGA manager framework
219Advanced Linux Sound Architecture Driver Initialized.
220NET: Registered protocol family 2
221tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
222TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
223TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
224TCP: Hash tables configured (established 4096 bind 4096)
225UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
226UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
227NET: Registered protocol family 1
228RPC: Registered named UNIX socket transport module.
229RPC: Registered udp transport module.
230RPC: Registered tcp transport module.
231RPC: Registered tcp NFSv4.1 backchannel transport module.
232PCI: CLS 0 bytes, default 64
233hw perfevents: no interrupt-affinity property for /pmu@f8891000, guessing.
234hw perfevents: enabled with armv7_cortex_a9 PMU driver, 5 counters available
235workingset: timestamp_bits=14 max_order=17 bucket_order=3
236jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
237io scheduler mq-deadline registered
238io scheduler kyber registered
239zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
240dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
241dma-pl330 f8003000.dmac: DBUFF-256x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
242brd: module loaded
243loop: module loaded
244spi-nor spi0.0: found n25q128a13, expected n25q128a11
245spi-nor spi0.0: trying to lock already unlocked area
246spi-nor spi0.0: n25q128a13 (16384 Kbytes)
2479 fixed-partitions partitions found on MTD device spi0.0
248Creating 9 MTD partitions on "spi0.0":
2490x000000000000-0x000000100000 : "qspi-fsbl-uboot"
2500x000000100000-0x000000600000 : "qspi-linux"
2510x000000600000-0x000000620000 : "qspi-device-tree"
2520x000000620000-0x000000c00000 : "qspi-rootfs"
2530x000000c00000-0x000001000000 : "qspi-bitstream"
2540x000000000000-0x000000500000 : "boot"
2550x000000500000-0x000000520000 : "bootenv"
2560x000000520000-0x000000fa0000 : "kernel"
2570x000000fa0000-0x000001000000 : "spare"
258libphy: Fixed MDIO Bus: probed
259CAN device driver interface
260libphy: MACB_mii_bus: probed
261mdio_bus e000b000.ethernet-ffffffff: MDIO device at address 0 is missing.
262macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 34 (00:0a:35:00:1e:53)
263e1000e: Intel(R) PRO/1000 Network Driver
264e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
265ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
266ehci-pci: EHCI PCI platform driver
267usbcore: registered new interface driver usb-storage
268ULPI transceiver vendor/product ID 0x0000/0x0000
269ULPI integrity check: failed!
270ci_hdrc ci_hdrc.0: unable to init phy: -19
271i2c /dev entries driver
272cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer with timeout 10s
273EDAC MC: ECC not enabled
274Xilinx Zynq CpuIdle Driver started
275sdhci: Secure Digital Host Controller Interface driver
276sdhci: Copyright(c) Pierre Ossman
277sdhci-pltfm: SDHCI platform and OF driver helper
278ledtrig-cpu: registered to indicate activity on CPUs
279clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 826992825 ns
280clocksource: Switched to clocksource ttc_clocksource
281sched_clock: 16 bits at 35kHz, resolution 28357ns, wraps every 929205421ns
282timer #0 at (ptrval), irq=48
283usbcore: registered new interface driver usbhid
284usbhid: USB HID core driver
285fpga_manager fpga0: Xilinx Zynq FPGA Manager registered
286NET: Registered protocol family 10
287Segment Routing with IPv6
288sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
289NET: Registered protocol family 17
290can: controller area network core
291NET: Registered protocol family 29
292can: raw protocol
293can: broadcast manager protocol
294can: netlink gateway - max_hops=1
295Registering SWP/SWPB emulation handler
296of-fpga-region fpga-full: FPGA Region probed
297of_cfs_init
298of_cfs_init: OK
299ALSA device list:
300 No soundcards found.
301mmc0: SDHCI controller on e0100000.mmc [e0100000.mmc] using ADMA 64-bit
302VFS: Cannot open root device "mmcblk0p2" or unknown-block(0,0): error -6
303Please append a correct "root=" boot option; here are the available partitions:
3040100 16384 ram0
305 (driver?)
3060101 16384 ram1
307 (driver?)
3080102 16384 ram2
309 (driver?)
3100103 16384 ram3
311 (driver?)
3120104 16384 ram4
313 (driver?)
3140105 16384 ram5
315 (driver?)
3160106 16384 ram6
317 (driver?)
3180107 16384 ram7
319 (driver?)
3200108 16384 ram8
321 (driver?)
3220109 16384 ram9
323 (driver?)
324010a 16384 ram10
325 (driver?)
326010b 16384 ram11
327 (driver?)
328010c 16384 ram12
329 (driver?)
330010d 16384 ram13
331 (driver?)
332010e 16384 ram14
333 (driver?)
334010f 16384 ram15
335 (driver?)
3361f00 1024 mtdblock0
337 (driver?)
3381f01 5120 mtdblock1
339 (driver?)
3401f02 128 mtdblock2
341 (driver?)
3421f03 6016 mtdblock3
343 (driver?)
3441f04 4096 mtdblock4
345 (driver?)
3461f05 5120 mtdblock5
347 (driver?)
3481f06 128 mtdblock6
349 (driver?)
3501f07 10752 mtdblock7
351 (driver?)
3521f08 384 mtdblock8
353 (driver?)
354Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
355CPU1: stopping
356CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.10.0-xilinx-v2021.1 #1
357Hardware name: Xilinx Zynq Platform
358[<c010cbc0>] (unwind_backtrace) from [<c0108cc0>] (show_stack+0x10/0x14)
359[<c0108cc0>] (show_stack) from [<c0712574>] (dump_stack+0xb4/0xd0)
360[<c0712574>] (dump_stack) from [<c010b0c4>] (do_handle_IPI+0x80/0x140)
361[<c010b0c4>] (do_handle_IPI) from [<c010b198>] (ipi_handler+0x14/0x20)
362[<c010b198>] (ipi_handler) from [<c015d658>] (handle_percpu_devid_irq+0x4c/0xf4)
363[<c015d658>] (handle_percpu_devid_irq) from [<c01588fc>] (generic_handle_irq+0x28/0x38)
364[<c01588fc>] (generic_handle_irq) from [<c0158ea8>] (__handle_domain_irq+0x90/0xa0)
365[<c0158ea8>] (__handle_domain_irq) from [<c037d9a8>] (gic_handle_irq+0x6c/0x7c)
366[<c037d9a8>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0xa8)
367Exception stack(0xc1085f20 to 0xc1085f68)
3685f20: 00000000 00000000 1e01b000 deb5c2c0 deb5b638 1dc751c4 00000000 00000000
3695f40: c0c3a700 00000000 1dc751c4 00000000 00000011 c1085f70 c058776c c0587790
3705f60: 60000013 ffffffff
371[<c0100b0c>] (__irq_svc) from [<c0587790>] (cpuidle_enter_state+0x110/0x284)
372[<c0587790>] (cpuidle_enter_state) from [<c0587940>] (cpuidle_enter+0x28/0x38)
373[<c0587940>] (cpuidle_enter) from [<c013f530>] (do_idle+0x240/0x264)
374[<c013f530>] (do_idle) from [<c013f6bc>] (cpu_startup_entry+0x18/0x1c)
375[<c013f6bc>] (cpu_startup_entry) from [<001014ac>] (0x1014ac)
376---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
377INFO: [LAUNCH_EMULATOR] Killing process in file /home/user/vitis-workspace/zedboard-hls-test/zedboard_20_base_2021_1_system/Emulation-SW/emulation.pid
378qemu-system-aarch64: terminating on signal 15 from pid 9426 ()
379
380Successfully killed launch_emulator process