· 6 years ago · Apr 15, 2020, 10:24 PM
1U-Boot TPL 2020.01-ayufan-2013-gdb96b24f (Apr 13 2020 - 08:43:36)
2LPDDR3, 800MHz
3BW=32 Col=11 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=4096MB
4Trying to boot from BOOTROM
5Returning to boot ROM...
6
7U-Boot SPL 2020.01-ayufan-2013-gdb96b24f (Apr 13 2020 - 08:43:36 +0000)
8board_init_sdmmc_pwr_en
9Trying to boot from MMC2
10NOTICE: BL31: v2.2(release):v2.2-286-g22d12c414
11NOTICE: BL31: Built : 08:43:34, Apr 13 2020
12NOTICE: BL31:Rockchip release version: v1.2
13
14
15U-Boot 2020.01-ayufan-2013-gdb96b24f (Apr 13 2020 - 08:43:42 +0000)
16
17Model: Pine64 Rock64
18DRAM: 4 GiB
19PMIC: RK8050 (on=0x40, off=0x00)
20MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
21Loading Environment from MMC... Card did not respond to voltage select!
22*** Warning - No block device, using default environment
23
24In: serial@ff130000
25Out: serial@ff130000
26Err: serial@ff130000
27Model: Pine64 Rock64
28Net: eth0: ethernet@ff540000
29Hit any key to stop autoboot: 0
30switch to partitions #0, OK
31mmc0(part 0) is current device
32Scanning mmc 0:3...
33Found /extlinux/extlinux.conf
34Retrieving file: /extlinux/extlinux.conf
35937 bytes read in 5 ms (182.6 KiB/s)
36select kernel
371: kernel-5.6.0-1135-ayufan-g40062313d773
382: kernel-5.6.0-1135-ayufan-g40062313d773-memtest
39Enter choice: 1: kernel-5.6.0-1135-ayufan-g40062313d773
40Retrieving file: /initrd.img-5.6.0-1135-ayufan-g40062313d773
4121506220 bytes read in 488 ms (42 MiB/s)
42Retrieving file: /vmlinuz-5.6.0-1135-ayufan-g40062313d773
4322915584 bytes read in 517 ms (42.3 MiB/s)
44append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=a2:f5:47:18:b2:e3 eth1addr= serial=56c4
45Retrieving file: /dtbs/5.6.0-1135-ayufan-g40062313d773/rockchip/rk3328-rock64.dtb
4637388 bytes read in 10 ms (3.6 MiB/s)
47## Flattened Device Tree blob at 01f00000
48 Booting using the fdt blob at 0x1f00000
49 Loading Ramdisk to fba9a000, end fcf1c8ac ... OK
50 Loading Device Tree to 00000000fba8d000, end 00000000fba9920b ... OK
51
52Starting kernel ...
53
54[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
55[ 0.000000] Linux version 5.6.0-1135-ayufan-g40062313d773 (root@runner-f725ff63-project-6422644-0
56[ 0.000000] Machine model: Pine64 Rock64
57[ 0.000000] efi: Getting EFI parameters from FDT:
58[ 0.000000] efi: UEFI not found.
59[ 0.000000] cma: Reserved 64 MiB at 0x00000000f7800000
60[ 0.000000] psci: probing for conduit method from DT.
61[ 0.000000] psci: PSCIv1.1 detected in firmware.
62[ 0.000000] psci: Using standard PSCI v0.2 function IDs
63[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
64[ 0.000000] psci: SMC Calling Convention v1.0
65[ 0.000000] percpu: Embedded 34 pages/cpu s101272 r8192 d29800 u139264
66[ 0.000000] Detected VIPT I-cache on CPU0
67[ 0.000000] CPU features: detected: ARM erratum 845719
68[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027656
69[ 0.000000] Kernel command line: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=a2:f5:47:14
70[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
71[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
72[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
73[ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
74[ 0.000000] Memory: 3911844K/4175872K available (14012K kernel code, 1130K rwdata, 5956K rodata,)
75[ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x84/0x168 with crng_init0
76[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
77[ 0.000000] rcu: Hierarchical RCU implementation.
78[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
79[ 0.000000] Tasks RCU enabled.
80[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
81[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
82[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
83[ 0.000000] GIC: Using split EOI/Deactivate mode
84[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
85[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_is
86[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
87[ 0.000856] Console: colour dummy device 80x25
88[ 0.001276] printk: console [tty0] enabled
89[ 0.001327] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 Bog)
90[ 0.001358] pid_max: default: 32768 minimum: 301
91[ 0.001621] LSM: Security Framework initializing
92[ 0.001653] Yama: becoming mindful.
93[ 0.001771] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
94[ 0.001815] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
95[ 0.001908] *** VALIDATE tmpfs ***
96[ 0.002567] *** VALIDATE proc ***
97[ 0.002893] *** VALIDATE cgroup ***
98[ 0.002913] *** VALIDATE cgroup2 ***
99[ 0.004057] rcu: Hierarchical SRCU implementation.
100[ 0.007069] EFI services will not be available.
101[ 0.007665] smp: Bringing up secondary CPUs ...
102[ 0.008295] Detected VIPT I-cache on CPU1
103[ 0.008361] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
104[ 0.009133] Detected VIPT I-cache on CPU2
105[ 0.009192] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
106[ 0.010049] Detected VIPT I-cache on CPU3
107[ 0.010105] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
108[ 0.010226] smp: Brought up 1 node, 4 CPUs
109[ 0.010271] SMP: Total of 4 processors activated.
110[ 0.010288] CPU features: detected: 32-bit EL0 Support
111[ 0.010306] CPU features: detected: CRC32 instructions
112[ 0.031863] CPU: All CPU(s) started at EL2
113[ 0.031947] alternatives: patching kernel code
114[ 0.034975] devtmpfs: initialized
115[ 0.047457] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604s
116[ 0.047506] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
117[ 0.050738] pinctrl core: initialized pinctrl subsystem
118[ 0.051631] thermal_sys: Registered thermal governor 'fair_share'
119[ 0.051637] thermal_sys: Registered thermal governor 'bang_bang'
120[ 0.051665] thermal_sys: Registered thermal governor 'step_wise'
121[ 0.051682] thermal_sys: Registered thermal governor 'user_space'
122[ 0.051699] thermal_sys: Registered thermal governor 'power_allocator'
123[ 0.052165] DMI not present or invalid.
124[ 0.053026] NET: Registered protocol family 16
125[ 0.055778] DMA: preallocated 1024 KiB pool for atomic allocations
126[ 0.057020] cpuidle: using governor ladder
127[ 0.057073] cpuidle: using governor menu
128[ 0.057835] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
129[ 0.057973] ASID allocator initialised with 65536 entries
130[ 0.058193] Serial: AMBA PL011 UART driver
131[ 0.095072] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
132[ 0.095106] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
133[ 0.095126] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
134[ 0.095146] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
135[ 2.252271] cryptd: max_cpu_qlen set to 1000
136[ 2.285408] ACPI: Interpreter disabled.
137[ 2.286701] rockchip-pinctrl pinctrl: pin gpio0-2 already requested by vcc-host-5v-regulator; car
138[ 2.286744] rockchip-pinctrl pinctrl: pin-2 (vcc-host1-5v-regulator) status -22
139[ 2.286771] rockchip-pinctrl pinctrl: could not request pin 2 (gpio0-2) from group usb20-host-drl
140[ 2.286799] reg-fixed-voltage vcc-host1-5v-regulator: Error applying setting, reverse things back
141[ 2.286836] reg-fixed-voltage: probe of vcc-host1-5v-regulator failed with error -22
142[ 2.287618] iommu: Default domain type: Translated
143[ 2.288800] vgaarb: loaded
144[ 2.289911] SCSI subsystem initialized
145[ 2.290556] usbcore: registered new interface driver usbfs
146[ 2.290630] usbcore: registered new interface driver hub
147[ 2.290758] usbcore: registered new device driver usb
148[ 2.291207] mc: Linux media interface: v0.10
149[ 2.291265] videodev: Linux video capture interface: v2.00
150[ 2.291366] pps_core: LinuxPPS API ver. 1 registered
151[ 2.291383] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux>
152[ 2.291419] PTP clock support registered
153[ 2.291768] EDAC MC: Ver: 3.0.0
154[ 2.292723] Advanced Linux Sound Architecture Driver Initialized.
155[ 2.293412] NetLabel: Initializing
156[ 2.293433] NetLabel: domain hash size = 128
157[ 2.293447] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
158[ 2.293552] NetLabel: unlabeled traffic allowed by default
159[ 2.294428] clocksource: Switched to clocksource arch_sys_counter
160[ 2.294459] *** VALIDATE bpf ***
161[ 2.294796] VFS: Disk quotas dquot_6.6.0
162[ 2.294889] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
163[ 2.294996] *** VALIDATE ramfs ***
164[ 2.295031] *** VALIDATE hugetlbfs ***
165[ 2.295461] pnp: PnP ACPI: disabled
166[ 2.304988] NET: Registered protocol family 2
167[ 2.305825] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
168[ 2.305943] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
169[ 2.306364] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
170[ 2.307112] TCP: Hash tables configured (established 32768 bind 32768)
171[ 2.307304] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
172[ 2.307469] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
173[ 2.307876] NET: Registered protocol family 1
174[ 2.308570] RPC: Registered named UNIX socket transport module.
175[ 2.308598] RPC: Registered udp transport module.
176[ 2.308613] RPC: Registered tcp transport module.
177[ 2.308627] RPC: Registered tcp NFSv4.1 backchannel transport module.
178[ 2.308653] PCI: CLS 0 bytes, default 64
179[ 2.308866] Trying to unpack rootfs image as initramfs...
180[ 2.742044] Freeing initrd memory: 21000K
181[ 2.743598] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
182[ 2.743976] kvm [1]: IPA Size Limit: 40bits
183[ 2.746538] kvm [1]: vgic interrupt IRQ1
184[ 2.746705] kvm [1]: Hyp mode initialized successfully
185[ 3.475611] workingset: timestamp_bits=46 max_order=20 bucket_order=0
186[ 3.484523] zbud: loaded
187[ 3.487567] *** VALIDATE nfs ***
188[ 3.487675] *** VALIDATE nfs4 ***
189[ 3.487787] NFS: Registering the id_resolver key type
190[ 3.487824] Key type id_resolver registered
191[ 3.487840] Key type id_legacy registered
192[ 3.487864] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
193[ 3.487920] ntfs: driver 2.1.32 [Flags: R/W].
194[ 3.488399] fuse: init (API version 7.31)
195[ 3.488533] *** VALIDATE fuseblk ***
196[ 3.488555] *** VALIDATE fuse ***
197[ 3.488973] SGI XFS with ACLs, security attributes, quota, no debug enabled
198[ 3.491187] *** VALIDATE xfs ***
199[ 3.526200] NET: Registered protocol family 38
200[ 3.526240] Key type asymmetric registered
201[ 3.526255] Asymmetric key parser 'x509' registered
202[ 3.526329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241)
203[ 3.526577] io scheduler mq-deadline registered
204[ 3.526597] io scheduler kyber registered
205[ 3.526835] io scheduler bfq registered
206[ 3.531303] gpio-syscon ff100000.syscon:grf-gpio: can't read the data register offset!
207[ 3.532915] IPMI message handler: version 39.2
208[ 3.535816] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
209[ 3.535853] dma-pl330 ff1f0000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events6
210[ 3.537599] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
211[ 3.539918] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 15, base_baud = 1500000) is a 16550A
212[ 3.618921] printk: console [ttyS2] enabled
213[ 3.624840] rockchip-spi ff190000.spi: Failed to request TX DMA channel
214[ 3.625451] rockchip-spi ff190000.spi: Failed to request RX DMA channel
215[ 3.627371] spi-nor spi0.0: gd25q128 (16384 Kbytes)
216[ 3.643411] rockchip-spi ff190000.spi: chipselect 0 already in use
217[ 3.643988] spi_master spi0: spi_device register error /spi@ff190000/spi-flash@0
218[ 3.644689] spi_master spi0: Failed to create SPI device for /spi@ff190000/spi-flash@0
219[ 3.646391] libphy: Fixed MDIO Bus: probed
220[ 3.648251] dwc3 ff600000.dwc3: Failed to get clk 'ref': -2
221[ 3.649754] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
222[ 3.650583] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
223[ 3.663810] dwc2 ff580000.usb: DWC OTG Controller
224[ 3.664273] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
225[ 3.664965] dwc2 ff580000.usb: irq 36, io mem 0xff580000
226[ 3.665683] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
227[ 3.666427] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
228[ 3.667075] usb usb1: Product: DWC OTG Controller
229[ 3.667503] usb usb1: Manufacturer: Linux 5.6.0-1135-ayufan-g40062313d773 dwc2_hsotg
230[ 3.668195] usb usb1: SerialNumber: ff580000.usb
231[ 3.669269] hub 1-0:1.0: USB hub found
232[ 3.669653] hub 1-0:1.0: 1 port detected
233[ 3.671821] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
234[ 3.672432] ehci-pci: EHCI PCI platform driver
235[ 3.672902] ehci-platform: EHCI generic platform driver
236[ 3.675807] ehci-platform ff5c0000.usb: EHCI Host Controller
237[ 3.676583] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
238[ 3.677437] ehci-platform ff5c0000.usb: irq 37, io mem 0xff5c0000
239[ 3.704461] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
240[ 3.705276] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
241[ 3.706021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
242[ 3.706670] usb usb2: Product: EHCI Host Controller
243[ 3.707111] usb usb2: Manufacturer: Linux 5.6.0-1135-ayufan-g40062313d773 ehci_hcd
244[ 3.707788] usb usb2: SerialNumber: ff5c0000.usb
245[ 3.708804] hub 2-0:1.0: USB hub found
246[ 3.709187] hub 2-0:1.0: 1 port detected
247[ 3.710080] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
248[ 3.710658] ohci-pci: OHCI PCI platform driver
249[ 3.711141] ohci-platform: OHCI generic platform driver
250[ 3.712010] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
251[ 3.712850] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
252[ 3.713675] ohci-platform ff5d0000.usb: irq 38, io mem 0xff5d0000
253[ 3.778833] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
254[ 3.779580] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
255[ 3.780230] usb usb3: Product: Generic Platform OHCI controller
256[ 3.780763] usb usb3: Manufacturer: Linux 5.6.0-1135-ayufan-g40062313d773 ohci_hcd
257[ 3.781440] usb usb3: SerialNumber: ff5d0000.usb
258[ 3.782487] hub 3-0:1.0: USB hub found
259[ 3.782873] hub 3-0:1.0: 1 port detected
260[ 3.783779] uhci_hcd: USB Universal Host Controller Interface driver
261[ 3.785121] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
262[ 3.785878] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
263[ 3.786754] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000000
264[ 3.787658] xhci-hcd xhci-hcd.0.auto: irq 172, io mem 0xff600000
265[ 3.788605] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
266[ 3.789350] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
267[ 3.789998] usb usb4: Product: xHCI Host Controller
268[ 3.790440] usb usb4: Manufacturer: Linux 5.6.0-1135-ayufan-g40062313d773 xhci-hcd
269[ 3.791119] usb usb4: SerialNumber: xhci-hcd.0.auto
270[ 3.792171] hub 4-0:1.0: USB hub found
271[ 3.792556] hub 4-0:1.0: 1 port detected
272[ 3.793340] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
273[ 3.794028] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
274[ 3.794758] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
275[ 3.795431] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
276[ 3.796310] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
277[ 3.797054] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
278[ 3.797702] usb usb5: Product: xHCI Host Controller
279[ 3.798143] usb usb5: Manufacturer: Linux 5.6.0-1135-ayufan-g40062313d773 xhci-hcd
280[ 3.798821] usb usb5: SerialNumber: xhci-hcd.0.auto
281[ 3.799902] hub 5-0:1.0: USB hub found
282[ 3.800293] hub 5-0:1.0: 1 port detected
283[ 3.801247] usbcore: registered new interface driver uas
284[ 3.801888] usbcore: registered new interface driver usb-storage
285[ 3.802470] usbcore: registered new interface driver ums-alauda
286[ 3.803042] usbcore: registered new interface driver ums-cypress
287[ 3.803623] usbcore: registered new interface driver ums-datafab
288[ 3.804202] usbcore: registered new interface driver ums_eneub6250
289[ 3.804837] usbcore: registered new interface driver ums-freecom
290[ 3.805420] usbcore: registered new interface driver ums-isd200
291[ 3.805990] usbcore: registered new interface driver ums-jumpshot
292[ 3.806585] usbcore: registered new interface driver ums-karma
293[ 3.807149] usbcore: registered new interface driver ums-onetouch
294[ 3.807753] usbcore: registered new interface driver ums-realtek
295[ 3.808334] usbcore: registered new interface driver ums-sddr09
296[ 3.808906] usbcore: registered new interface driver ums-sddr55
297[ 3.809477] usbcore: registered new interface driver ums-usbat
298[ 3.810111] usbcore: registered new interface driver usbserial_generic
299[ 3.810718] usbserial: USB Serial support registered for generic
300[ 3.813058] mousedev: PS/2 mouse device common for all mice
301[ 3.816865] rk808 1-0018: chip id: 0x8050
302[ 3.822805] rk808-regulator rk808-regulator: there is no dvs0 gpio
303[ 3.823402] rk808-regulator rk808-regulator: there is no dvs1 gpio
304[ 3.824023] DCDC_REG1: supplied by vcc_sys
305[ 3.826935] vcc_host_5v: supplied by vcc_sys
306[ 3.827467] DCDC_REG2: supplied by vcc_sys
307[ 3.829388] DCDC_REG3: supplied by vcc_sys
308[ 3.830005] DCDC_REG4: supplied by vcc_sys
309[ 3.831635] LDO_REG1: supplied by vcc_io
310[ 3.834977] LDO_REG2: supplied by vcc_io
311[ 3.838335] LDO_REG3: supplied by vcc_sys
312[ 3.851184] rk808-rtc rk808-rtc: registered as rtc0
313[ 3.856031] device-mapper: uevent: version 1.0.3
314[ 3.856892] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
315[ 3.859230] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >=0
316[ 3.861734] sdhci: Secure Digital Host Controller Interface driver
317[ 3.862301] sdhci: Copyright(c) Pierre Ossman
318[ 3.863362] Synopsys Designware Multimedia Card Interface Driver
319[ 3.865221] dwmmc_rockchip ff520000.mmc: IDMAC supports 32-bit address mode.
320[ 3.865867] dwmmc_rockchip ff520000.mmc: Using internal DMA controller.
321[ 3.866454] dwmmc_rockchip ff520000.mmc: Version ID is 270a
322[ 3.866986] dwmmc_rockchip ff520000.mmc: DW MMC controller at irq 33,32 bit host data width,256 o
323[ 3.867905] mmc_host mmc0: card is non-removable.
324[ 3.880990] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div)
325[ 3.895183] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
326[ 3.895856] dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
327[ 3.896447] dwmmc_rockchip ff500000.mmc: Version ID is 270a
328[ 3.896999] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 34,32 bit host data width,256 o
329[ 3.897880] vcc_sd: supplied by vcc_io
330[ 3.898442] dwmmc_rockchip ff500000.mmc: Got CD GPIO
331[ 3.911601] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div)
332[ 3.925067] sdhci-pltfm: SDHCI platform and OF driver helper
333[ 3.928268] leds-gpio: probe of leds failed with error -16
334[ 3.929032] ledtrig-cpu: registered to indicate activity on CPUs
335[ 3.929802] hid: raw HID events driver (C) Jiri Kosina
336[ 3.930395] usbcore: registered new interface driver usbhid
337[ 3.930888] usbhid: USB HID core driver
338[ 3.931363] hantro-vpu ff350000.video-codec: Adding to iommu group 0
339[ 3.932388] hantro-vpu ff350000.video-codec: registered rockchip,rk3328-vpu-dec as /dev/video0
340[ 3.936235] Initializing XFRM netlink socket
341[ 3.937231] NET: Registered protocol family 10
342[ 3.966217] random: fast init done
343[ 3.966687] Segment Routing with IPv6
344[ 3.967102] mip6: Mobile IPv6
345[ 3.967374] NET: Registered protocol family 17
346[ 3.967962] Key type dns_resolver registered
347[ 3.968975] registered taskstats version 1
348[ 3.969455] zswap: loaded using pool lzo/zbud
349[ 3.970180] Key type ._fscrypt registered
350[ 3.970546] Key type .fscrypt registered
351[ 3.970894] Key type fscrypt-provisioning registered
352[ 3.971424] Key type big_key registered
353[ 3.982815] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000)
354[ 3.986163] Key type encrypted registered
355[ 4.000151] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
356[ 4.000929] mmc0: new HS200 MMC card at address 0001
357[ 4.002089] mmcblk0: mmc0:0001 NCard 14.5 GiB
358[ 4.002872] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB
359[ 4.003757] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB
360[ 4.004504] mmcblk0rpmb: mmc0:0001 NCard partition 3 4.00 MiB, chardev (238:0)
361[ 4.005595] rk808-rtc rk808-rtc: setting system clock to 2016-01-21T08:52:18 UTC (1453366338)
362[ 4.006405] of_cfs_init
363[ 4.006765] of_cfs_init: OK
364[ 4.007941] ALSA device list:
365[ 4.008235] No soundcards found.
366[ 4.009195] Freeing unused kernel memory: 1216K
367[ 4.012071] GPT:Primary header thinks Alt. header is not at the end of the disk.
368[ 4.012734] GPT:5859361 != 30310399
369[ 4.013043] GPT:Alternate GPT header not at the end of the disk.
370[ 4.013571] GPT:5859361 != 30310399
371[ 4.013879] GPT: Use GNU Parted to correct GPT errors.
372[ 4.014358] mmcblk0: p1 p2 p3 p4
373[ 4.084570] Run /init as init process
374Loading, please wait...
375Starting version 245.4-2ubuntu1
376[ 4.435904] rockchip-vop ff370000.vop: Adding to iommu group 1
377[ 4.457392] rockchip-drm display-subsystem: bound ff370000.vop (ops vop_component_ops [rockchipd)
378[ 4.458433] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw)
379[ 4.458948] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
380[ 4.459825] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver
381[ 4.459894] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
382[ 4.460965] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops dw_hdmi_rockchip_ops [rockc)
383[ 4.461181] rk_gmac-dwmac ff540000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mo.
384[ 4.461958] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
385[ 4.462840] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
386[ 4.463391] [drm] No driver support for vblank timestamp query.
387[ 4.464019] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
388[ 4.464537] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
389[ 4.465108] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24).
390[ 4.466181] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
391[ 4.466252] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18).
392[ 4.467463] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
393[ 4.468660] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed
394[ 4.469298] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
395[ 4.474857] rk_gmac-dwmac ff540000.ethernet: init for RGMII
396[ 4.476158] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35
397[ 4.476816] rk_gmac-dwmac ff540000.ethernet: DWMAC1000
398[ 4.477287] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register supported
399[ 4.477948] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine supported
400[ 4.478609] rk_gmac-dwmac ff540000.ethernet: COE Type 2
401[ 4.479075] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported
402[ 4.479684] rk_gmac-dwmac ff540000.ethernet: Normal descriptors
403[ 4.480216] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled
404[ 4.480734] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer
405[ 4.487832] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
406[ 4.524453] dwmmc_rockchip ff520000.mmc: Unexpected command timeout, state 3
407[ 4.594320] libphy: stmmac: probed
408[ 4.594674] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Etherne)
409[ 4.595780] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Etherne)
410[ 4.724451] dwmmc_rockchip ff520000.mmc: Unexpected command timeout, state 3
411[ 4.889873] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div)
412[ 4.939896] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000)
413[ 4.953443] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
414[ 4.973975] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
415[ 4.974657] blk_update_request: I/O error, dev mmcblk0, sector 537 op 0x0:(READ) flags 0x80700 p0
416[ 5.043507] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
417[ 5.044147] blk_update_request: I/O error, dev mmcblk0, sector 654 op 0x0:(READ) flags 0x80700 p0
418[ 5.065524] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
419[ 5.066161] blk_update_request: I/O error, dev mmcblk0, sector 675 op 0x0:(READ) flags 0x80700 p0
420[ 5.089093] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
421[ 5.089728] blk_update_request: I/O error, dev mmcblk0, sector 700 op 0x0:(READ) flags 0x80700 p0
422[ 5.110617] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
423[ 5.111253] blk_update_request: I/O error, dev mmcblk0, sector 719 op 0x0:(READ) flags 0x80700 p0
424[ 5.178836] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
425[ 5.179472] blk_update_request: I/O error, dev mmcblk0, sector 834 op 0x0:(READ) flags 0x80700 p0
426[ 5.203288] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
427[ 5.203925] blk_update_request: I/O error, dev mmcblk0, sector 862 op 0x0:(READ) flags 0x80700 p0
428[ 5.238098] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
429[ 5.238734] blk_update_request: I/O error, dev mmcblk0, sector 918 op 0x0:(READ) flags 0x80700 p0
430[ 5.270929] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
431[ 5.271564] blk_update_request: I/O error, dev mmcblk0, sector 968 op 0x0:(READ) flags 0x80700 p0
432[ 5.297897] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
433[ 5.298532] blk_update_request: I/O error, dev mmcblk0, sector 1004 op 0x0:(READ) flags 0x80700 0
434[ 5.320737] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
435[ 5.354446] dwmmc_rockchip ff520000.mmc: Unexpected command timeout, state 3
436[ 5.514807] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
437[ 5.529908] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div)
438[ 5.579765] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000)
439[ 5.593305] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
440[ 5.607503] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
441[ 5.610501] Buffer I/O error on dev mmcblk0, logical block 67, async page read
442[ 5.630613] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
443[ 5.779911] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div)
444[ 5.829858] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000)
445[ 5.843361] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
446[ 5.859380] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
447[ 5.880205] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
448[ 5.934104] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
449[ 5.974436] dwmmc_rockchip ff520000.mmc: Unexpected command timeout, state 3
450[ 6.140011] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div)
451[ 6.190027] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000)
452[ 6.203558] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
453[ 6.219025] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
454Begin: Loading essential drivers ... done.
455Begin: Running /scripts/init-premount ... done.
456Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
457Begin: Running /scripts/local-premount ... done.
458Warning: fsck not present, so skipping root file system
459[ 6.344748] EXT4-fs (mmcblk0p4): recovery complete
460[ 6.345204] EXT4-fs (mmcblk0p4): mounted filesystem with writeback data mode. Opts: (null)
461done.
462Begin: Running /scripts/local-bottom ... done.
463Begin: Running /scripts/init-bottom ... done.
464[ 6.393718] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
465[ 6.396155] random: crng init done
466[ 6.404876] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
467[ 6.420774] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div)
468[ 6.470762] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000)
469[ 6.484364] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
470[ 6.579825] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
471[ 6.634450] dwmmc_rockchip ff520000.mmc: Unexpected command timeout, state 3
472[ 6.834447] dwmmc_rockchip ff520000.mmc: Unexpected command timeout, state 3
473[ 6.999848] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div)
474[ 7.049864] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000)
475[ 7.063276] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
476[ 7.169684] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
477[ 7.407669] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
478[ 7.423598] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div)
479[ 7.473646] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000)
480[ 7.487219] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
481[ 7.503008] dwmmc_rockchip ff520000.mmc: Successfully tuned phase to 91
482[ 7.504200] EXT4-fs warning (device mmcblk0p4): ext4_dx_find_entry:1647: inode #4416: lblock 2: k
483run-init: can't execute '/sbin/init': Input/outp[ut error 7.505715] Kernel panic - not syncing: 0
484[ 7.506733] CPU: 0 PID: 1 Comm: run-init Not tainted 5.6.0-1135-ayufan-g40062313d773 #ayufan
485[ 7.507475] Hardware name: Pine64 Rock64 (DT)
486[ 7.507860] Call trace:
487[ 7.508089] dump_backtrace+0x0/0x1d0
488[ 7.508418] show_stack+0x14/0x20
489[ 7.508717] dump_stack+0xbc/0x104
490[ 7.509023] panic+0x158/0x378
491[ 7.509297] do_exit+0x8c4/0x9c0
492[ 7.509586] do_group_exit+0x44/0xa8
493[ 7.509906] __arm64_sys_exit_group+0x14/0x18
494[ 7.510299] el0_svc_common.constprop.2+0x64/0x160
495[ 7.510724] do_el0_svc+0x20/0x80
496[ 7.511021] el0_sync_handler+0xe4/0x188
497[ 7.511371] el0_sync+0x140/0x180
498[ 7.511672] SMP: stopping secondary CPUs
499[ 7.512024] Kernel Offset: disabled
500[ 7.512335] CPU features: 0x00002,20002004
501[ 7.512699] Memory Limit: none
502[ 7.512976] Rebooting in 10 seconds..