· 6 years ago · Jan 15, 2020, 03:28 PM
1[ 0.000000] Booting Linux on physical CPU 0x0
2[ 0.000000] Linux version 4.9.210-perf+ (javinator9889@zorin-X580GD) (ClangBuiltLinux clang version 10.0.0 (git://github.com/llvm/llvm-project 6f773205cd05e47912096d7c4091f03c28255ab2) Found CUDA installation: /usr/lib/cuda, version 9.1) #2 SMP PREEMPT Wed Jan 15 15:21:37 CET 2020
3[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
4[ 0.000000] Machine: Qualcomm Technologies, Inc. MSM8953 + PMI8950 QRD SKU3
5[ 0.000000] core_ctl: disable_cpumask=0-7
6[ 0.000000] efi: Getting EFI parameters from FDT:
7[ 0.000000] efi: UEFI not found.
8[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB
9[ 0.000000] OF: reserved mem: initialized node gpu_region@0, compatible id shared-dma-pool
10[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000c7800000, size 8 MiB
11[ 0.000000] OF: reserved mem: initialized node adsp_shmem_device_region@0xc0100000, compatible id shared-dma-pool
12[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ff000000, size 16 MiB
13[ 0.000000] OF: reserved mem: initialized node qseecom_region@0, compatible id shared-dma-pool
14[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fdc00000, size 20 MiB
15[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
16[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f2800000, size 180 MiB
17[ 0.000000] OF: reserved mem: initialized node secure_region@0, compatible id shared-dma-pool
18[ 0.000000] OF: reserved mem: invalid size property in 'mem_dump_region' node.
19[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f2400000, size 4 MiB
20[ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
21[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f2000000, size 4 MiB
22[ 0.000000] OF: reserved mem: initialized node adsp_region@0, compatible id shared-dma-pool
23[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f000000, size 8 MiB
24[ 0.000000] OF: reserved mem: initialized node venus_region@0, compatible id shared-dma-pool
25[ 0.000000] Removed memory: created DMA memory pool at 0x0000000084a00000, size 30 MiB
26[ 0.000000] OF: reserved mem: initialized node other_ext_region@0, compatible id removed-dma-pool
27[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086c00000, size 106 MiB
28[ 0.000000] OF: reserved mem: initialized node modem_region@0, compatible id removed-dma-pool
29[ 0.000000] Removed memory: created DMA memory pool at 0x000000008d600000, size 18 MiB
30[ 0.000000] OF: reserved mem: initialized node adsp_fw_region@0, compatible id removed-dma-pool
31[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e800000, size 7 MiB
32[ 0.000000] OF: reserved mem: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
33[ 0.000000] Removed memory: created DMA memory pool at 0x000000009ff00000, size 1 MiB
34[ 0.000000] OF: reserved mem: initialized node pstore_reserve_mem_region@0, compatible id removed-dma-pool
35[ 0.000000] psci: probing for conduit method from DT.
36[ 0.000000] psci: PSCIv1.0 detected in firmware.
37[ 0.000000] psci: Using standard PSCI v0.2 function IDs
38[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
39[ 0.000000] psci: SMC Calling Convention v1.0
40[ 0.000000] Did not receive the expected number of bytes from PRNG: 0
41[ 0.000000] percpu: Embedded 22 pages/cpu s51864 r8192 d30056 u90112
42[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
43[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 926208
44[ 0.000000] Kernel command line: core_ctl_disable_cpumask=0-7 kpti=0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci earlycon=msm_hsl_uart,0x78af000 firmware_class.path=/vendor/firmware_mnt/image androidboot.usbconfigfs=true buildvariant=userdebug veritykeyid=id:7e4333f9bba00adfe0ede979e28ed1920492b40f androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=1c8240480704 androidboot.secureboot=1 androidboot.bootloader=MSM8953_TISSOT2.0_20190422143927 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_ili7807_fhd_video:1:none:cfg:single_dsi androidboot.slot_suffix=_b skip_initramfs rootwait ro init=/init root=/dev/dm-0 dm="system none ro,0 1 android-verity /dev/mmcblk0p26"
45[ 0.000000] device-mapper: init: will configure 1 devices
46[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
47[ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
48[ 0.000000] log_buf_len min size: 131072 bytes
49[ 0.000000] log_buf_len: 1048576 bytes
50[ 0.000000] early log buf free: 125804(95%)
51[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
52[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
53[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
54[ 0.000000] Memory: 3357304K/3766272K available (19964K kernel code, 4480K rwdata, 6028K rodata, 6144K init, 2952K bss, 155016K reserved, 253952K cma-reserved)
55[ 0.000000] Virtual kernel memory layout:
56[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
57[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
58[ 0.000000] .text : 0x (ptrval) - 0x (ptrval) ( 19968 KB)
59[ 0.000000] .rodata : 0x (ptrval) - 0x (ptrval) ( 6144 KB)
60[ 0.000000] .init : 0x (ptrval) - 0x (ptrval) ( 6144 KB)
61[ 0.000000] .data : 0x (ptrval) - 0x (ptrval) ( 4481 KB)
62[ 0.000000] .bss : 0x (ptrval) - 0x (ptrval) ( 2953 KB)
63[ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
64[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
65[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
66[ 0.000000] 0xffffffbf00400000 - 0xffffffbf04000000 ( 60 MB actual)
67[ 0.000000] memory : 0xffffffc010000000 - 0xffffffc100000000 ( 3840 MB)
68[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
69[ 0.000000] Preemptible hierarchical RCU implementation.
70[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
71[ 0.000000] NR_IRQS:64 nr_irqs:64 0
72[ 0.000000] Offload RCU callbacks from all CPUs
73[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
74[ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
75[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
76[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
77[ 0.000023] clocksource: Switched to clocksource arch_sys_counter
78[ 0.000986] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
79[ 0.001000] pid_max: default: 32768 minimum: 301
80[ 0.001075] Security Framework initialized
81[ 0.001085] SELinux: Initializing.
82[ 0.001172] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
83[ 0.001182] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
84[ 0.002351] /cpus/cpu@0: Missing clock-frequency property
85[ 0.002363] /cpus/cpu@1: Missing clock-frequency property
86[ 0.002373] /cpus/cpu@2: Missing clock-frequency property
87[ 0.002384] /cpus/cpu@3: Missing clock-frequency property
88[ 0.002395] /cpus/cpu@100: Missing clock-frequency property
89[ 0.002409] /cpus/cpu@101: Missing clock-frequency property
90[ 0.002422] /cpus/cpu@102: Missing clock-frequency property
91[ 0.002435] /cpus/cpu@103: Missing clock-frequency property
92[ 0.002610] sched-energy: Sched-energy-costs installed from DT
93[ 0.006020] ASID allocator initialised with 32768 entries
94[ 0.007175] NOHZ: local_softirq_pending 02
95[ 0.013206] cpu_clock_pwr_init: Power clocks configured
96[ 0.015733] MSM Memory Dump base table set up
97[ 0.015761] MSM Memory Dump apps data table set up
98[ 0.015929] EFI services will not be available.
99[ 0.024678] CPU1: Booted secondary processor [410fd034]
100[ 0.033039] CPU2: Booted secondary processor [410fd034]
101[ 0.041366] CPU3: Booted secondary processor [410fd034]
102[ 0.049809] CPU4: Booted secondary processor [410fd034]
103[ 0.058265] CPU5: Booted secondary processor [410fd034]
104[ 0.066656] CPU6: Booted secondary processor [410fd034]
105[ 0.075101] CPU7: Booted secondary processor [410fd034]
106[ 0.075381] Brought up 8 CPUs
107[ 0.075412] SMP: Total of 8 processors activated.
108[ 0.075422] CPU features: detected feature: 32-bit EL0 Support
109[ 0.075430] CPU features: kernel page table isolation forced OFF by command line option
110[ 0.079045] CPU: All CPU(s) started at EL1
111[ 0.079124] alternatives: patching kernel code
112[ 0.079546] CPU7: update max cpu_capacity 1024
113[ 0.141081] CPU1: update max cpu_capacity 1024
114[ 0.142319] DMI not present or invalid.
115[ 0.142854] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
116[ 0.142876] futex hash table entries: 2048 (order: 6, 262144 bytes)
117[ 0.153522] pinctrl core: initialized pinctrl subsystem
118[ 0.154382] NET: Registered protocol family 16
119[ 0.156573] schedtune: init normalization constants...
120[ 0.156587] schedtune: CLUSTER[0-3] min_pwr: 1 max_pwr: 180
121[ 0.156596] schedtune: CPU[0] min_pwr: 1 max_pwr: 65
122[ 0.156603] schedtune: CPU[1] min_pwr: 1 max_pwr: 65
123[ 0.156610] schedtune: CPU[2] min_pwr: 1 max_pwr: 65
124[ 0.156617] schedtune: CPU[3] min_pwr: 1 max_pwr: 65
125[ 0.156625] schedtune: CLUSTER[4-7] min_pwr: 1 max_pwr: 175
126[ 0.156632] schedtune: CPU[4] min_pwr: 1 max_pwr: 65
127[ 0.156640] schedtune: CPU[5] min_pwr: 1 max_pwr: 65
128[ 0.156647] schedtune: CPU[6] min_pwr: 1 max_pwr: 65
129[ 0.156655] schedtune: CPU[7] min_pwr: 1 max_pwr: 65
130[ 0.156661] schedtune: SYSTEM min_pwr: 10 max_pwr: 875
131[ 0.156668] schedtune: using normalization constants mul: 789479538 sh1: 1 sh2: 9
132[ 0.156674] schedtune: verify normalization constants...
133[ 0.156680] schedtune: max_pwr/2^0: 865 => norm_pwr: 1024
134[ 0.156731] schedtune: max_pwr/2^1: 432 => norm_pwr: 511
135[ 0.156737] schedtune: max_pwr/2^2: 216 => norm_pwr: 255
136[ 0.156743] schedtune: max_pwr/2^3: 108 => norm_pwr: 127
137[ 0.156750] schedtune: max_pwr/2^4: 54 => norm_pwr: 63
138[ 0.156756] schedtune: max_pwr/2^5: 27 => norm_pwr: 31
139[ 0.156763] schedtune: configured to support 5 boost groups
140[ 0.156960] ramoops: using module parameters
141[ 0.157682] pstore: using zlib compression
142[ 0.158308] console [pstore0] enabled
143[ 0.158410] pstore: Registered ramoops as persistent store backend
144[ 0.158420] ramoops: attached 0x100000@0x9ff00000, ecc: 0/0
145[ 0.160183] cpuidle: using governor menu
146[ 0.161435] cpuidle: using governor qcom
147[ 0.165907] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval))
148[ 0.165928] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
149[ 0.167123] DMA: preallocated 256 KiB pool for atomic allocations
150[ 0.172137] smd_channel_probe_now: allocation table not initialized
151[ 0.173025] smd_channel_probe_now: allocation table not initialized
152[ 0.173550] smd_channel_probe_now: allocation table not initialized
153[ 0.174271] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
154[ 0.174907] pm8953_s1: Bringing 1uV into 16-16uV
155[ 0.175486] pm8953_s2_level: Bringing 1uV into 16-16uV
156[ 0.175859] pm8953_s2_floor_level: Bringing 1uV into 16-16uV
157[ 0.176829] pm8953_s2_level_ao: Bringing 1uV into 16-16uV
158[ 0.178846] pm8953_s7_level_ao: Bringing 1uV into 16-16uV
159[ 0.188710] pm8953_l23: Bringing 120000uV into 1200000-1200000uV
160[ 0.189487] qcom,gcc-8953 1800000.qcom,gcc: Venus speed bin: 2
161[ 0.206010] branch_clk_handoff: gcc_usb_phy_cfg_ahb_clk clock is enabled in HW[ 0.206024] branch_clk_handoff: even though ENABLE_BIT is not set
162[ 0.207462] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks
163[ 0.207985] msm8953-pinctrl 1000000.pinctrl: invalid resource
164[ 0.218513] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0
165[ 0.225901] sps:sps is ready.
166[ 0.229509] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
167[ 0.229621] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-pwrcl regulator!!!
168[ 0.231293] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
169[ 0.232530] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
170[ 0.234786] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region@0
171[ 0.235763] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
172[ 0.236517] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
173[ 0.236842] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
174[ 0.237065] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
175[ 0.237243] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
176[ 0.238101] apc_mem_acc_corner: Bringing 0uV into 1-1uV
177[ 0.238931] gfx_mem_acc_corner: Bringing 0uV into 1-1uV
178[ 0.239437] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV
179[ 0.239449] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV
180[ 0.239459] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV
181[ 0.239474] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000
182[ 0.239483] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000
183[ 0.239493] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default
184[ 0.240239] pm8953_s5_avs_limit: Bringing 0uV into 400000-400000uV
185[ 0.240484] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us
186[ 0.275647] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
187[ 0.275666] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
188[ 0.275692] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
189[ 0.276259] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
190[ 0.276300] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
191[ 0.276310] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
192[ 0.276334] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
193[ 0.277432] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
194[ 0.277894] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
195[ 0.280930] KPI: Bootloader start count = 25430
196[ 0.280944] KPI: Bootloader end count = 464555
197[ 0.280952] KPI: Bootloader display count = 73365
198[ 0.280959] KPI: Bootloader load kernel count = 3601
199[ 0.280967] KPI: Kernel MPM timestamp = 483690
200[ 0.280974] KPI: Kernel MPM Clock frequency = 32768
201[ 0.280999] socinfo_print: v0.10, id=293, ver=1.1, raw_id=70, raw_ver=1, hw_plat=11, hw_plat_ver=65536
202[ 0.280999] accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=3 serial_number=2586271450
203[ 0.283458] arm-smmu 1c40000.arm,smmu-kgsl: Couldn't get clock: gpu_ahb_clk
204[ 0.283916] arm-smmu 1e00000.qcom,iommu: (IDR0.CTTW overridden by dma-coherent property)
205[ 0.283931] arm-smmu 1e00000.qcom,iommu: stream matching with 122 register groups, mask 0x7fff
206[ 0.284049] arm-smmu 1e00000.qcom,iommu: found 32 context interrupt(s) but have 30 context banks. assuming 30 context interrupts.
207[ 0.284964] iommu: Adding device soc:qcom,msm-audio-ion to group 0
208[ 0.288982] SCSI subsystem initialized
209[ 0.289212] usbcore: registered new interface driver usbfs
210[ 0.289266] usbcore: registered new interface driver hub
211[ 0.289615] usbcore: registered new device driver usb
212[ 0.290970] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
213[ 0.291002] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
214[ 0.291340] input: qpnp_pon as /devices/virtual/input/input0
215[ 0.292734] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi8950@2:qcom,power-on@800: No PON config. specified
216[ 0.292801] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi8950@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
217[ 0.292827] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi8950@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
218[ 0.293439] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
219[ 0.293527] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[ 0.293542] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
220[ 0.293827] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[ 0.294458] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
221[ 0.294522] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[ 0.294534] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
222[ 0.294672] i2c-msm-v2 78b7000.i2c: irq:71 when no active transfer
223[ 0.294770] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[ 0.295375] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
224[ 0.295427] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[ 0.295437] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
225[ 0.295667] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[ 0.296168] media: Linux media interface: v0.10
226[ 0.296217] Linux video capture interface: v2.00
227[ 0.310232] EDAC MC: Ver: 3.0.0
228[ 0.311654] Unable to get pmic_revid rc=-22
229[ 0.311766] dmi: Firmware registration failed.
230[ 0.312845] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
231[ 0.313005] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
232[ 0.313159] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
233[ 0.313491] ION heap system created
234[ 0.313816] ION heap mm created at 0x00000000f2800000 with size b400000
235[ 0.313836] ION heap qsecom created at 0x00000000ff000000 with size 1000000
236[ 0.313872] ION heap qsecom_ta created at 0x00000000f2400000 with size 400000
237[ 0.315081] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[ 0.315091] ipa ipa_init:4016 fail to register with bus mgr!
238[ 0.315185] ipa ipa_plat_drv_probe:5046 ipa_init failed
239[ 0.315914] PMIC@SID0: PM8953 v1.0 options: 2, 2, 0, 0
240[ 0.316065] PMIC@SID2: PMI8937 v2.0 options: 0, 0, 0, 0
241[ 0.318319] Advanced Linux Sound Architecture Driver Initialized.
242[ 0.318885] Bluetooth: Core ver 2.22
243[ 0.318923] NET: Registered protocol family 31
244[ 0.318931] Bluetooth: HCI device and connection manager initialized
245[ 0.318945] Bluetooth: HCI socket layer initialized
246[ 0.318958] Bluetooth: L2CAP socket layer initialized
247[ 0.319573] NetLabel: Initializing
248[ 0.319583] NetLabel: domain hash size = 128
249[ 0.319590] NetLabel: protocols = UNLABELED CIPSOv4
250[ 0.319646] NetLabel: unlabeled traffic allowed by default
251[ 0.320212] gcc_oxili_gfx3d_clk: set OPP pair(19200000 Hz: 615000 uV) on 1c00000.qcom,kgsl-3d0
252[ 0.320567] gcc_oxili_gfx3d_clk: set OPP pair(200000000 Hz: 675000 uV) on 1c00000.qcom,kgsl-3d0
253[ 0.321040] gcc_oxili_gfx3d_clk: set OPP pair(650000000 Hz: 0 uV) on 1c00000.qcom,kgsl-3d0
254[ 0.321402] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks.
255[ 0.321522] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
256[ 0.321649] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-pwrcl regulator!!!
257[ 0.322166] cpr4_apss_read_fuse_data: apc_corner: speed bin = 2, CPR fusing revision = 3, foundry id = 2
258[ 0.322178] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
259[ 0.322215] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
260[ 0.322321] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused LowSVS: open-loop= 625000 uV
261[ 0.322331] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 690000 uV
262[ 0.322340] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 815000 uV
263[ 0.322348] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV
264[ 0.322405] cpr4_apss_calculate_target_quotients: apc_corner: fused LowSVS: quot[ 7]= 450
265[ 0.322417] cpr4_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 560, quot_offset[ 7]= 105
266[ 0.322427] cpr4_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 816, quot_offset[ 7]= 255
267[ 0.322437] cpr4_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1015, quot_offset[ 7]= 195
268[ 0.322602] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = 22, aging RO scale = 2800 QUOT/V
269[ 0.322733] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop[ 0.324479] qpnp_labibb_regulator_probe: LAB/IBB registered successfully, lab_vreg enable=1 ibb_vreg enable=1 swire_control=0
270[ 0.324777] gdsc_oxili_gx: supplied by msm_gfx_ldo
271[ 0.325983] arm-smmu 1c40000.arm,smmu-kgsl: (IDR0.CTTW overridden by dma-coherent property)
272[ 0.325999] arm-smmu 1c40000.arm,smmu-kgsl: stream matching with 4 register groups, mask 0x7fff
273[ 0.329729] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[ 0.329741] ipa ipa_init:4016 fail to register with bus mgr!
274[ 0.329816] ipa ipa_plat_drv_probe:5046 ipa_init failed
275[ 0.329934] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
276[ 0.331692] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0
277[ 0.331706] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0
278[ 0.331719] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0
279[ 0.331730] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0
280[ 0.331741] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0
281[ 0.331752] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0
282[ 0.331759] ramp_lmh_sid: Use Default LMH SID
283[ 0.331767] ramp_dfs_sid: Use Default DFS SID
284[ 0.331774] ramp_link_sid: Use Default Link SID
285[ 0.331823] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1
286[ 0.331834] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1
287[ 0.331845] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1
288[ 0.331856] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1
289[ 0.331867] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1
290[ 0.331877] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1
291[ 0.331885] ramp_lmh_sid: Use Default LMH SID
292[ 0.331891] ramp_dfs_sid: Use Default DFS SID
293[ 0.331898] ramp_link_sid: Use Default Link SID
294[ 0.331946] clock_rcgwr_init: RCGwR Init Completed
295[ 0.335344] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7)
296[ 0.335359] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1
297[ 0.335366] print_opp_table: clock_cpu: a53 C0: OPP voltage for 2016000000: 7
298[ 0.335375] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1
299[ 0.335382] print_opp_table: clock_cpu: a53 C2: OPP voltage for 2016000000: 7
300[ 0.335600] sched-energy energy-costs: cpu=0 eff=1024 [freq=652800 cap=302 power_d0=5] -> [freq=2400000 cap=932 power_d0=65]
301[ 0.335610] CPU0: update cpu_capacity 932
302[ 0.335624] sched-energy energy-costs: cpu=1 eff=1024 [freq=652800 cap=302 power_d0=5] -> [freq=2400000 cap=932 power_d0=65]
303[ 0.335631] CPU1: update cpu_capacity 932
304[ 0.335644] sched-energy energy-costs: cpu=2 eff=1024 [freq=652800 cap=302 power_d0=5] -> [freq=2400000 cap=932 power_d0=65]
305[ 0.335651] CPU2: update cpu_capacity 932
306[ 0.335664] sched-energy energy-costs: cpu=3 eff=1024 [freq=652800 cap=302 power_d0=5] -> [freq=2400000 cap=932 power_d0=65]
307[ 0.335672] CPU3: update cpu_capacity 932
308[ 0.335685] sched-energy energy-costs: cpu=4 eff=1126 [freq=652800 cap=332 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
309[ 0.335692] CPU4: update cpu_capacity 1024
310[ 0.335705] sched-energy energy-costs: cpu=5 eff=1126 [freq=652800 cap=332 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
311[ 0.335713] CPU5: update cpu_capacity 1024
312[ 0.335726] sched-energy energy-costs: cpu=6 eff=1126 [freq=652800 cap=332 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
313[ 0.335733] CPU6: update cpu_capacity 1024
314[ 0.335746] sched-energy energy-costs: cpu=7 eff=1126 [freq=652800 cap=332 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
315[ 0.335753] CPU7: update cpu_capacity 1024
316[ 0.337154] sched-energy energy-costs: Sched-energy-costs capacity updated
317[ 0.339559] cpufreq: driver msm up and running
318[ 0.339761] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[ 0.339765] ipa ipa_init:4016 fail to register with bus mgr!
319[ 0.339805] ipa ipa_plat_drv_probe:5046 ipa_init failed
320[ 0.340044] CPU2: update max cpu_capacity 932
321[ 0.340050] CPU5: update max cpu_capacity 1024
322[ 0.340358] clocksource: Switched to clocksource arch_sys_counter
323[ 0.370314] VFS: Disk quotas dquot_6.6.0
324[ 0.370356] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
325[ 0.370404] msm_bus_fabric_init_driver
326[ 0.374420] msm_bus_device 580000.ad-hoc-bus: Bus scaling driver probe successful
327[ 0.375387] NET: Registered protocol family 2
328[ 0.375729] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
329[ 0.375854] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
330[ 0.376198] TCP: Hash tables configured (established 32768 bind 32768)
331[ 0.376240] UDP hash table entries: 2048 (order: 4, 65536 bytes)
332[ 0.376286] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
333[ 0.376410] NET: Registered protocol family 1
334[ 0.377039] gcc-mdss-8953 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks.
335[ 0.377530] ipa ipa2_uc_state_check:297 uC interface not initialized
336[ 0.377540] ipa ipa_sps_irq_control_all:963 EP (2) not allocated.
337[ 0.377545] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
338[ 0.380934] sps:BAM 0x0000000007904000 is registered.[ 0.382376] sps:BAM 0x0000000007904000 (va:0xffffff800b0c0000) enabled: ver:0x27, number of pipes:20
339[ 0.389561] IPA driver initialization was successful.
340[ 0.394252] Freeing initrd memory: 19012K
341[ 0.395123] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
342[ 0.397815] audit: initializing netlink subsys (disabled)
343[ 0.397867] audit: type=2000 audit(0.396:1): initialized
344[ 0.398043] Initialise system trusted keyrings
345[ 0.398349] workingset: timestamp_bits=61 max_order=20 bucket_order=0
346[ 0.402113] [SDFAT] Filesystem version 2.1.8
347[ 0.402221] Registering sdcardfs 0.1
348[ 0.402355] fuse init (API version 7.26)
349[ 0.403224] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
350[ 0.403229] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
351[ 0.403234] pfk [pfk_init]: Driver initialized successfully
352[ 0.406857] Key type asymmetric registered
353[ 0.406862] Asymmetric key parser 'x509' registered
354[ 0.406873] io scheduler noop registered
355[ 0.406985] io scheduler cfq registered (default)
356[ 0.413426] msm_mdss_get_res_byname: 'vbif_nrt_phys' resource not found
357[ 0.413440] mdss_mdp_probe+0x26c/0x15b4->msm_mdss_ioremap_byname: 'vbif_nrt_phys' msm_mdss_get_res_byname failed
358[ 0.413605] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
359[ 0.413616] mdss_mdp_irq_clk_register: unable to get clk: mnoc_clk
360[ 0.413916] No change in context(0==0), skip
361[ 0.414596] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
362[ 0.414611] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
363[ 0.414616] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
364[ 0.414629] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
365[ 0.414640] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
366[ 0.414648] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
367[ 0.414725] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
368[ 0.414732] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-bus-througput-factor : u32 array read
369[ 0.414911] xlog_status: enable:1, panic:1, dump:2
370[ 0.415113] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 1
371[ 0.415237] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 2
372[ 0.415385] mdss_mdp_probe: mdss version = 0x10100000, bootloader display is on, num 1, intf_sel=0x00000100
373[ 0.416449] mdss_smmu_util_parse_dt_clock: clocks are not defined
374[ 0.416458] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
375[ 0.416471] mdss_smmu_util_parse_dt_clock: clocks are not defined
376[ 0.416477] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
377[ 0.416576] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
378[ 0.416585] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
379[ 0.416594] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
380[ 0.417184] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
381[ 0.417268] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_ili7807_fhd_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_ili7807_fhd_video
382[ 0.417286] mdss_dsi_panel_init: Panel Name = ili7807 fhd video mode dsi panel
383[ 0.417375] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_ili7807_fhd_video" (ffffffc0eb00d800)
384[ 0.417387] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
385[ 0.417393] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
386[ 0.417397] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
387[ 0.417459] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
388[ 0.417464] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
389[ 0.417478] mdss_dsi_parse_panel_features: ulps feature disabled
390[ 0.417483] mdss_dsi_parse_panel_features: ulps during suspend feature disabled[ 0.417489] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
391[ 0.417502] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
392[ 0.417507] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
393[ 0.417536] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
394[ 0.417543] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
395[ 0.417550] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
396[ 0.417557] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
397[ 0.417581] 1a94000.qcom,mdss_dsi_ctrl0 supply vdd not found, using dummy regulator
398[ 0.417685] mdss_dsi_parse_ctrl_params:4226 Unable to read qcom,display-id, data=0000000000000000,len=20
399[ 0.417695] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
400[ 0.417699] mdss_dsi_parse_gpio_params: ext vdd gpio not specified
401[ 0.417747] msm_mdss_get_res_byname: 'dsi_phy_regulator' resource not found
402[ 0.417759] mdss_dsi_retrieve_ctrl_resources+0x1a0/0x204->msm_mdss_ioremap_byname: 'dsi_phy_regulator' msm_mdss_get_res_byname failed
403[ 0.417764] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800b001000 ctrl_size=400 phy_base=ffffff800b003400 phy_size=580
404[ 0.417874] dsi_panel_device_register: Continuous splash enabled
405[ 0.417932] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
406[ 0.419222] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x2
407[ 0.419247] mdss_dsi_status_init: DSI status check interval:5000
408[ 0.419417] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
409[ 0.419803] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
410[ 0.420167] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
411[ 0.420346] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
412[ 0.420399] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
413[ 0.420447] mdss_mdp_splash_parse_dt: splash mem child node is not present
414[ 0.420561] qcom-sps-dma 7884000.qcom,sps-dma: dma_async_device_register: device has no channels!
415[ 0.420586] qcom-sps-dma 7ac4000.qcom,sps-dma: dma_async_device_register: device has no channels!
416[ 0.423016] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
417[ 0.423022] batched_hyp_assign: Failed to assign memory protection, ret = -5
418[ 0.423027] memshare: hyp_assign_phys failed size=2097152 err=-5
419[ 0.423054] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
420[ 0.423104] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
421[ 0.424729] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
422[ 0.424735] batched_hyp_assign: Failed to assign memory protection, ret = -5
423[ 0.424739] memshare: hyp_assign_phys failed size=5242880 err=-5
424[ 0.424748] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
425[ 0.425847] minidump-id not found for a506_zap
426[ 0.425860] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped.
427[ 0.426195] minidump-id not found for adsp
428[ 0.426274] minidump-id not found for wcnss
429[ 0.426430] minidump-id not found for venus
430[ 0.426441] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
431[ 0.427274] minidump-id not found for modem
432[ 0.428137] wcnss: wcnss_wlan probed in built-in mode
433[ 0.428659] msm_serial_hs module loaded
434[ 0.429927] random: fast init done
435[ 0.429995] random: crng init done
436[ 0.430682] diag: MUX: unable to register pcie operations for proc: 0, err: -22
437[ 0.430687] diag: MUX: unable to register PCIe operations, continuing with USB registrations for proc: 0, err: -22
438[ 0.435043] diag: In __diag_glink_init, unable to register for glink channel DIAG_CTRL
439[ 0.435182] diag: In __diag_glink_init, unable to register for glink channel DIAG_DATA
440[ 0.435269] diag: In __diag_glink_init, unable to register for glink channel DIAG_CMD
441[ 0.435359] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_DATA
442[ 0.435445] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_CMD
443[ 0.438072] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_user to group 3
444[ 0.438233] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0
445[ 0.438443] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_secure to group 4
446[ 0.446655] brd: module loaded
447[ 0.449541] loop: module loaded
448[ 0.449826] zram: Added device: zram0
449[ 0.450698] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1001000
450[ 0.450718] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE[ 0.450725] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
451[ 0.450729] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
452[ 0.450895] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
453[ 0.451382] nq-nci 5-0028: nqx_probe: clkreq gpio not provided
454[ 0.451391] nq-nci 5-0028: nqx_probe: probing nqxx failed, check hardware
455[ 0.453566] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
456[ 0.453835] qce 720000.qcedev: QTI Crypto 5.3.3 device found @0x720000
457[ 0.453843] qce 720000.qcedev: CE device = 0x0 IO base, CE = ffffff800b5a0000 Consumer (IN) PIPE 2,
458[ 0.453843] Producer (OUT) PIPE 3 IO base BAM = 0000000000000000
459[ 0.453843] BAM IRQ 65 Engines Availability = 0x2010853
460[ 0.453975] sps:BAM 0x0000000000704000 is registered.[ 0.454122] sps:BAM 0x0000000000704000 (va:0xffffff800c020000) enabled: ver:0x27, number of pipes:8
461[ 0.454284] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000000704000 irq 65
462[ 0.459456] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
463[ 0.459722] qcrypto 720000.qcrypto: QTI Crypto 5.3.3 device found @0x720000
464[ 0.459730] qcrypto 720000.qcrypto: CE device = 0x0 IO base, CE = ffffff800c060000 Consumer (IN) PIPE 4,
465[ 0.459730] Producer (OUT) PIPE 5 IO base BAM = 0000000000000000
466[ 0.459730] BAM IRQ 65 Engines Availability = 0x2010853
467[ 0.459942] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000000704000 irq 65
468[ 0.462323] qcrypto 720000.qcrypto: qcrypto-ecb-aes
469[ 0.462434] qcrypto 720000.qcrypto: qcrypto-cbc-aes
470[ 0.462540] qcrypto 720000.qcrypto: qcrypto-ctr-aes
471[ 0.462642] qcrypto 720000.qcrypto: qcrypto-ecb-des
472[ 0.462743] qcrypto 720000.qcrypto: qcrypto-cbc-des
473[ 0.462843] qcrypto 720000.qcrypto: qcrypto-ecb-3des
474[ 0.462942] qcrypto 720000.qcrypto: qcrypto-cbc-3des
475[ 0.463041] qcrypto 720000.qcrypto: qcrypto-xts-aes
476[ 0.463144] qcrypto 720000.qcrypto: qcrypto-sha1
477[ 0.463244] qcrypto 720000.qcrypto: qcrypto-sha256
478[ 0.463344] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
479[ 0.463535] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
480[ 0.463622] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
481[ 0.463699] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
482[ 0.463776] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
483[ 0.463852] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
484[ 0.463939] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
485[ 0.464015] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
486[ 0.464089] qcrypto 720000.qcrypto: qcrypto-aes-ccm
487[ 0.464168] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
488[ 0.464641] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
489[ 0.464691] ICE IRQ = 76
490[ 0.465078] SCSI Media Changer driver v0.25
491[ 0.465808] sps: BAM device 0x0000000007ac4000 is not registered yet.
492[ 0.465951] sps:BAM 0x0000000007ac4000 is registered.[ 0.466344] sps:BAM 0x0000000007ac4000 (va:0xffffff800b660000) enabled: ver:0x19, number of pipes:12
493[ 0.467302] libphy: Fixed MDIO Bus: probed
494[ 0.467307] tun: Universal TUN/TAP device driver, 1.6
495[ 0.467310] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
496[ 0.467348] PPP generic driver version 2.4.2
497[ 0.467395] PPP BSD Compression module registered
498[ 0.467400] PPP Deflate Compression module registered
499[ 0.467419] PPP MPPE Compression module registered
500[ 0.467423] NET: Registered protocol family 24
501[ 0.467526] usbcore: registered new interface driver asix
502[ 0.467570] usbcore: registered new interface driver ax88179_178a
503[ 0.467589] usbcore: registered new interface driver cdc_ether
504[ 0.467608] usbcore: registered new interface driver net1080
505[ 0.467627] usbcore: registered new interface driver cdc_subset
506[ 0.467648] usbcore: registered new interface driver zaurus
507[ 0.467672] usbcore: registered new interface driver cdc_ncm
508[ 0.467677] CHRDEV "uio" major number 233 goes below the dynamic allocation range
509[ 0.468003] msm_sharedmem: sharedmem_register_qmi: qmi init successful
510[ 0.468736] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
511[ 0.468741] batched_hyp_assign: Failed to assign memory protection, ret = -5
512[ 0.468747] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000fe700000 size=1572864 err=-5
513[ 0.468805] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
514[ 0.471059] msm-dwc3 7000000.ssusb: unable to get dbm device
515[ 0.471545] CHRDEV "usbmon" major number 232 goes below the dynamic allocation range
516[ 0.471593] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
517[ 0.471597] ehci-platform: EHCI generic platform driver
518[ 0.471804] ehci-msm: Qualcomm On-Chip EHCI Host Controller
519[ 0.472294] usbcore: registered new interface driver cdc_acm
520[ 0.472297] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
521[ 0.472325] usbcore: registered new interface driver usb-storage
522[ 0.472343] usbcore: registered new interface driver ums-alauda
523[ 0.472361] usbcore: registered new interface driver ums-cypress
524[ 0.472378] usbcore: registered new interface driver ums-datafab
525[ 0.472397] usbcore: registered new interface driver ums-freecom
526[ 0.472415] usbcore: registered new interface driver ums-isd200
527[ 0.472432] usbcore: registered new interface driver ums-jumpshot
528[ 0.472450] usbcore: registered new interface driver ums-karma
529[ 0.472467] usbcore: registered new interface driver ums-onetouch
530[ 0.472484] usbcore: registered new interface driver ums-sddr09
531[ 0.472502] usbcore: registered new interface driver ums-sddr55
532[ 0.472519] usbcore: registered new interface driver ums-usbat
533[ 0.472564] usbcore: registered new interface driver usbserial
534[ 0.472585] usbcore: registered new interface driver usb_ehset_test
535[ 0.472616] CHRDEV "ttyGS" major number 231 goes below the dynamic allocation range
536[ 0.473461] usb_qcrndis_init: failed to register diag -17
537[ 0.473480] CHRDEV "rmnet_ctrl" major number 230 goes below the dynamic allocation range
538[ 0.473817] mousedev: PS/2 mouse device common for all mice
539[ 0.473930] usbcore: registered new interface driver xpad
540[ 0.473951] usbcore: registered new interface driver usb_acecad
541[ 0.473976] usbcore: registered new interface driver aiptek
542[ 0.473997] usbcore: registered new interface driver gtco
543[ 0.474017] usbcore: registered new interface driver hanwang
544[ 0.474037] usbcore: registered new interface driver kbtab
545[ 0.474066] tony_test:[ft5435_ts_init]
546[ 0.474459] ~~~~~ ft5435_ts_probe start
547[ 0.474463] [ft5435_ts_probe]CONFIG_FB is defined
548[ 0.474467] [ft5435_ts_probe]CONFIG_PM is defined
549[ 0.474495] [ft5435_get_dt_vkey]000
550[ 0.474498] [ft5435_get_dt_vkey]111
551[ 0.474501] [ft5435_get_dt_vkey]222
552[ 0.474504] [ft5435_get_dt_vkey]333
553[ 0.474508] [FTS]keycode = 172, x= 500, y=2040
554[ 0.474513] [FTS]keycode = 139, x= 200, y=2040
555[ 0.474518] [FTS]keycode = 158, x= 800, y=2040
556[ 0.474521] [ft5435_get_dt_vkey]5555
557[ 0.474605] input: ft5435_ts as /devices/platform/soc/78b7000.i2c/i2c-3/3-0038/input/input1
558[ 0.690255] ft5435_ts 3-0038: Device ID = 0x54
559[ 0.690699] ft5435_ts 3-0038: report rate = 110Hz
560[ 0.691268] ft5435_ts 3-0038: Firmware version = 9.0.0
561[ 0.691413] [Fu]fw_vendor_id=0xd0
562[ 0.691417] upgrade,fts_fw_vendor_id=0xd0
563[ 0.691421] ft5435_fw_upgrade_by_array_data, suspended=0
564[ 0.691427] ft5435_ts 3-0038: Current firmware: 0x09.0.0
565[ 0.691431] ft5435_ts 3-0038: New firmware: 0x09.0.0
566[ 0.691436] ft5435_ts 3-0038: Exiting fw upgrade...
567[ 0.691439] ft5435_fw_upgrade_by_array_data done
568[ 0.691481] ~~~~~ tp_glove_register enable!!!!!
569[ 0.691485] [fts]ft5435_fw_LockDownInfo_get_from_boot, fw_vendor_id=0xd0
570[ 1.056937] ft5435_fw_LockDownInfo_get_from_boot, FTS_UPGRADE_LOOP ok is i = 0
571[ 1.083632] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x31, j=0
572[ 1.083636] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x37, j=1
573[ 1.083639] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x32, j=2
574[ 1.083643] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x01, j=3
575[ 1.083646] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0xd2, j=4
576[ 1.083650] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x00, j=5
577[ 1.083653] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x31, j=6
578[ 1.083656] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x01, j=7
579[ 1.083660] ft5435_fw_LockDownInfo_get_from_boot: reset the tp
580[ 1.386716] tpd_probe, ft5x46_ctpm_LockDownInfo_get_from_boot, tp_lockdown_info=31373201d2003101
581[ 1.386728] ft5435_ts 3-0038: Create proc entry success!
582[ 1.386833] ~~~~~ ft5435_ts_probe end
583[ 1.386869] [FTS]fts_ts_init: Enter
584[ 1.386896] [FTS]fts_ts_probe: Enter
585[ 1.386900] [FTS]fts_parse_dt: Enter
586[ 1.386909] [FTS]3: (139, 172, 158), [900, 540, 180][2034]
587[ 1.386915] [FTS]max_touch_number=10
588[ 1.386918] [FTS]fts_parse_dt: Exit(982)
589[ 1.386925] [FTS]fts_input_dev_init: Enter
590[ 1.386927] [FTS]set key capabilities
591[ 1.386999] input: fts_ts as /devices/platform/soc/78b7000.i2c/i2c-3/3-0040/input/input2
592[ 1.387036] [FTS]fts_input_dev_init: Exit(316)
593[ 1.387040] [FTS]fts_ctpm_get_upgrade_array: Enter
594[ 1.387044] [FTS][Info]CHIP TYPE ID = 0x8716
595[ 1.387047] [FTS]fts_ctpm_get_upgrade_array: Exit(161)
596[ 1.387050] [FTS]fts_gpio_configure: Enter
597[ 1.387053] [FTS][Error][GPIO]irq gpio request failed
598[ 1.387056] [FTS]fts_gpio_configure: Exit(863)
599[ 1.387060] [FTS][Error][GPIO]Failed to configure the gpios
600[ 1.387067] fts_ts_probe:free gpio
601[ 1.387075] fts_ts: probe of 3-0040 failed with error -16
602[ 1.387100] [FTS]fts_ts_init: Exit(1506)
603[ 1.387597] gf_probe 787
604[ 1.387697] input: gf3208 as /devices/virtual/input/input3
605[ 1.387733] gf_probe 877 end, status = 0
606[ 1.387787] status = 0x0
607[ 1.388064] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio16" for function "blsp_spi7"
608[ 1.388076] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio17" for function "blsp_spi7"
609[ 1.388086] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio18" for function "blsp_spi7"
610[ 1.388097] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio19" for function "blsp_spi7"
611[ 1.388168] fpc1020 soc:fpc1020: fpc1020_probe: ok
612[ 1.388191] fpc1020_init OK
613[ 1.388892] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8953@0:qcom,pm8953_rtc: rtc core: registered qpnp_rtc as rtc0
614[ 1.389024] i2c /dev entries driver
615[ 1.389131] peelir_init:npages = 150
616[ 1.389316] @@@@ peelir_probe, 397
617[ 1.389320] @@@@ peelir_probe, 412
618[ 1.389357] peelir_probe: lr-gpio-valid = 0
619[ 1.389361] peelir_probe:lr_en = 73
620[ 1.391941] iommu: Adding device 1d00000.qcom,vidc:non_secure_cb to group 5
621[ 1.392385] iommu: Adding device 1d00000.qcom,vidc:secure_bitstream_cb to group 6
622[ 1.392663] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
623[ 1.392668] batched_hyp_assign: Failed to assign memory protection, ret = -5
624[ 1.392733] iommu: Adding device 1d00000.qcom,vidc:secure_pixel_cb to group 7
625[ 1.392974] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
626[ 1.392978] batched_hyp_assign: Failed to assign memory protection, ret = -5
627[ 1.393046] iommu: Adding device 1d00000.qcom,vidc:secure_non_pixel_cb to group 8
628[ 1.393282] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
629[ 1.393286] batched_hyp_assign: Failed to assign memory protection, ret = -5
630[ 1.396953] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 9
631[ 1.397037] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [0] = 1024
632,[ 1.397042] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [1] = 10240
633[ 1.397042] ,
634[ 1.397100] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb3 to group 10
635[ 1.397175] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :cpp sid [0] = 7168
636,[ 1.397230] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 11
637[ 1.397305] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :jpeg_enc0 sid [0] = 6144
638,[ 1.398133] msm 1b00000.qcom,msm-cam: Entity type for entity msm_cci was not initialized!
639[ 1.398213] msm_camera_get_dt_vreg_data:1126 number of entries is 0 or not present in dts
640[ 1.399775] msm 1b00000.qcom,msm-cam: Entity type for entity msm_csiphy was not initialized!
641[ 1.399825] msm_camera_get_dt_vreg_data:1126 number of entries is 0 or not present in dts
642[ 1.399942] msm 1b00000.qcom,msm-cam: Entity type for entity msm_csiphy was not initialized!
643[ 1.399987] msm_camera_get_dt_vreg_data:1126 number of entries is 0 or not present in dts
644[ 1.400080] msm 1b00000.qcom,msm-cam: Entity type for entity msm_csiphy was not initialized!
645[ 1.400125] msm_camera_get_dt_vreg_data:1126 number of entries is 0 or not present in dts
646[ 1.400416] msm_camera_get_dt_vreg_data:1126 number of entries is 0 or not present in dts
647[ 1.400425] msm 1b00000.qcom,msm-cam: Entity type for entity msm_csid was not initialized!
648[ 1.400541] msm_camera_get_dt_vreg_data:1126 number of entries is 0 or not present in dts
649[ 1.400550] msm 1b00000.qcom,msm-cam: Entity type for entity msm_csid was not initialized!
650[ 1.400658] msm_camera_get_dt_vreg_data:1126 number of entries is 0 or not present in dts
651[ 1.400667] msm 1b00000.qcom,msm-cam: Entity type for entity msm_csid was not initialized!
652[ 1.400946] msm_actuator_platform_probe:1994 msm_actuator_platform_probe: No/Error Actuator GPIOs
653[ 1.400953] msm 1b00000.qcom,msm-cam: Entity type for entity msm_actuator was not initialized!
654[ 1.401008] msm_actuator_platform_probe:1994 msm_actuator_platform_probe: No/Error Actuator GPIOs
655[ 1.401014] msm 1b00000.qcom,msm-cam: Entity type for entity msm_actuator was not initialized!
656[ 1.401435] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
657[ 1.418046] msm_cci_init:1443: hw_version = 0x10020005
658[ 1.501110] msm 1b00000.qcom,msm-cam: Entity type for entity msm_eeprom was not initialized!
659[ 1.501371] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
660[ 1.518179] msm_cci_init:1443: hw_version = 0x10020005
661[ 1.518635] msm_cci_irq:1822 MASTER_1 error 0x40000000
662[ 1.518663] msm_cci_i2c_read:966 read_words = 0, exp words = 1
663[ 1.518668] msm_cci_i2c_read_bytes:1049 failed rc -22
664[ 1.518672] read_eeprom_memory error
665[ 1.518675] msm_eeprom_platform_probe read_eeprom_memory failed
666[ 1.533910] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@3 failed with error -22
667[ 1.534112] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
668[ 1.551280] msm_cci_init:1443: hw_version = 0x10020005
669[ 2.432448] msm 1b00000.qcom,msm-cam: Entity type for entity msm_eeprom was not initialized!
670[ 2.432682] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
671[ 2.450729] msm_cci_init:1443: hw_version = 0x10020005
672[ 3.331810] msm 1b00000.qcom,msm-cam: Entity type for entity msm_eeprom was not initialized!
673[ 3.332059] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
674[ 3.350113] msm_cci_init:1443: hw_version = 0x10020005
675[ 3.467044] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
676[ 3.467049] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
677[ 4.231265] msm 1b00000.qcom,msm-cam: Entity type for entity msm_eeprom was not initialized!
678[ 4.231495] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
679[ 4.248776] msm_cci_init:1443: hw_version = 0x10020005
680[ 5.129882] msm 1b00000.qcom,msm-cam: Entity type for entity msm_eeprom was not initialized!
681[ 5.130606] msm 1b00000.qcom,msm-cam: Entity type for entity msm_camera_flash was not initialized!
682[ 5.131312] msm 1b00000.qcom,msm-cam: Entity type for entity msm_sensor_init was not initialized!
683[ 5.134831] MSM-CPP cpp_init_hardware:1133 CPP HW Version: 0x40030003
684[ 5.134838] MSM-CPP cpp_init_hardware:1151 stream_cnt:0
685[ 5.134847] msm 1b00000.qcom,msm-cam: Entity type for entity 1b04000.qcom,cpp was not initialized!
686[ 5.134926] MSM-CPP cpp_release_hardware:1214 cpp hw release done
687[ 5.135901] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found
688[ 5.135906] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found
689[ 5.135976] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk
690[ 5.136695] msm 1b00000.qcom,msm-cam: Entity type for entity 1b10000.qcom,vfe0 was not initialized!
691[ 5.136797] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found
692[ 5.136801] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found
693[ 5.136862] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk
694[ 5.136890] msm 1b00000.qcom,msm-cam: Entity type for entity 1b14000.qcom,vfe1 was not initialized!
695[ 5.137338] msm 1b00000.qcom,msm-cam: Entity type for entity 1b31000.qcom,ispif was not initialized!
696[ 5.137576] __msm_jpeg_init:1591] Jpeg Device id 0[ 5.137694] CHRDEV "jpeg0" major number 229 goes below the dynamic allocation range
697[ 5.137797] msm 1b00000.qcom,msm-cam: Entity type for entity msm_buf_mngr was not initialized!
698[ 5.138514] FG: fg_check_ima_exception: Initial ima_err_sts=0 ima_exp_sts=0 ima_hw_sts=cc
699[ 5.139804] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=55
700[ 5.142318] SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb HVDCP disabled
701[ 5.152142] qpnp-smbcharger 200f000.qcom,spmi:qcom,pmi8950@2:qcom,qpnp-smbcharger: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=1
702[ 5.154101] TYPEC: qpnp_typec_probe: TypeC successfully probed state=18 CC-line-state=1
703[ 5.155087] thermal thermal_zone1: failed to read out thermal zone (-517)
704[ 5.155324] thermal thermal_zone18: failed to read out thermal zone (-517)
705[ 5.155360] thermal thermal_zone46: failed to read out thermal zone (-517)
706[ 5.155669] qpnp_vadc_read: Error reading die_temp
707[ 5.176891] md: linear personality registered for level -1
708[ 5.176980] device-mapper: uevent: version 1.0.3
709[ 5.177096] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
710[ 5.177244] device-mapper: req-crypt: dm-req-crypt successfully initalized.
711[ 5.177244]
712[ 5.177638] CHRDEV "bt" major number 228 goes below the dynamic allocation range
713[ 5.177714] sdhci: Secure Digital Host Controller Interface driver
714[ 5.177717] sdhci: Copyright(c) Pierre Ossman
715[ 5.177721] sdhci-pltfm: SDHCI platform and OF driver helper
716[ 5.178931] sdhci_msm 7824900.sdhci: failed opening nvmem cell err : -2
717[ 5.178942] qcom_ice_get_pdevice: found ice device ffffffc0147be600
718[ 5.178946] qcom_ice_get_pdevice: matching platform device ffffffc0ecb95800
719[ 5.179133] sdhci_msm 7824900.sdhci: Failed to get dll hsr settings from dt
720[ 5.181954] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x13 (ok)
721[ 5.182075] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff800b5d8000
722[ 5.182555] CHRDEV "hidraw" major number 227 goes below the dynamic allocation range
723[ 5.182572] hidraw: raw HID events driver (C) Jiri Kosina
724[ 5.182833] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode
725[ 5.183189] CHRDEV "roccat" major number 226 goes below the dynamic allocation range
726[ 5.183714] usbcore: registered new interface driver usbhid
727[ 5.183717] usbhid: USB HID core driver
728[ 5.183828] ashmem: initialized
729[ 5.184043] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
730[ 5.270991] mmc0: Out-of-interrupt timeout is 50[ms]
731[ 5.270997] mmc0: eMMC FW version: 0xa2
732[ 5.271000] mmc0: CMDQ supported: depth: 32
733[ 5.271004] mmc0: cache barrier support 1 flush policy 1
734[ 5.284512] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 63488 slot-sz: 24
735[ 5.284656] mmc0: CMDQ enabled on card
736[ 5.284665] mmc0: new HS400 Enhanced strobe MMC card at address 0001
737[ 5.287161] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1
738[ 5.287167] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1
739[ 5.287249] mmcblk0: mmc0:0001 HCG8a4 58.2 GiB
740[ 5.288437] mmcblk0rpmb: mmc0:0001 HCG8a4 partition 3 4.00 MiB
741[ 5.290219] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51
742[ 5.292704] tz_log 8600720.tz-log: Hyp log service is not supported
743[ 5.295451] sdhci_msm 7864900.sdhci: failed opening nvmem cell err : -2
744[ 5.295460] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
745[ 5.295635] sdhci_msm 7864900.sdhci: Failed to get dll hsr settings from dt
746[ 5.309738] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode
747[ 5.340484] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
748[ 5.342757] coresight-tmc 6028000.tmc: failed to get flush cti
749[ 5.342763] coresight-tmc 6028000.tmc: failed to get reset cti
750[ 5.342769] coresight-tmc 6028000.tmc: failed to get csr, defer probe
751[ 5.342850] coresight-tmc 6027000.tmc: failed to get flush cti
752[ 5.342855] coresight-tmc 6027000.tmc: failed to get reset cti
753[ 5.342860] coresight-tmc 6027000.tmc: failed to get csr, defer probe
754[ 5.343815] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized
755[ 5.343924] coresight-stm 6002000.stm: stm_register_device failed, probing deffered
756[ 5.344362] OF: graph: no port node found in /soc/cti@6010000
757[ 5.344430] OF: graph: no port node found in /soc/cti@6011000
758[ 5.344496] OF: graph: no port node found in /soc/cti@6012000
759[ 5.344562] OF: graph: no port node found in /soc/cti@6013000
760[ 5.344630] OF: graph: no port node found in /soc/cti@6014000
761[ 5.344699] OF: graph: no port node found in /soc/cti@6015000
762[ 5.344765] OF: graph: no port node found in /soc/cti@6016000
763[ 5.344833] OF: graph: no port node found in /soc/cti@6017000
764[ 5.344903] OF: graph: no port node found in /soc/cti@6018000
765[ 5.344971] OF: graph: no port node found in /soc/cti@6019000
766[ 5.345036] OF: graph: no port node found in /soc/cti@601a000
767[ 5.345102] OF: graph: no port node found in /soc/cti@601b000
768[ 5.345177] OF: graph: no port node found in /soc/cti@601c000
769[ 5.345257] OF: graph: no port node found in /soc/cti@601d000
770[ 5.345325] OF: graph: no port node found in /soc/cti@601e000
771[ 5.345392] OF: graph: no port node found in /soc/cti@601f000
772[ 5.345459] OF: graph: no port node found in /soc/cti@6198000
773[ 5.345534] OF: graph: no port node found in /soc/cti@6199000
774[ 5.345608] OF: graph: no port node found in /soc/cti@619a000
775[ 5.345683] OF: graph: no port node found in /soc/cti@619b000
776[ 5.345759] OF: graph: no port node found in /soc/cti@61b8000
777[ 5.345838] OF: graph: no port node found in /soc/cti@61b9000
778[ 5.345919] OF: graph: no port node found in /soc/cti@61ba000
779[ 5.346001] OF: graph: no port node found in /soc/cti@61bb000
780[ 5.346085] OF: graph: no port node found in /soc/cti@6128000
781[ 5.346153] OF: graph: no port node found in /soc/cti@6124000
782[ 5.346220] OF: graph: no port node found in /soc/cti@6134000
783[ 5.346289] OF: graph: no port node found in /soc/cti@6139000
784[ 5.346361] OF: graph: no port node found in /soc/cti@613c000
785[ 5.346431] OF: graph: no port node found in /soc/cti@610c000
786[ 5.346557] OF: graph: no port node found in /soc/csr@6001000
787[ 5.346598] coresight-csr 6001000.csr: CSR initialized: coresight-csr
788[ 5.346836] OF: graph: no port node found in /soc/hwevent@6101000
789[ 5.346883] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
790[ 5.347287] CHRDEV "sensors" major number 224 goes below the dynamic allocation range
791[ 5.347502] usbcore: registered new interface driver snd-usb-audio
792[ 5.347965] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
793[ 5.349985] max98927 reset gpio requse name:max98927L------
794[ 5.349994] reset_gpio_l:86------
795[ 5.370270] max98927 L device version 0x42
796[ 5.370274] max98927 L read ok.
797[ 5.370277] max98927 R read enter.
798[ 5.370290] max98927 driver probe end.
799[ 5.370293] f0_detect_init
800[ 5.377963] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx group_id: 0x9100
801[ 5.378110] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0 dev_id: 0x9000
802[ 5.378121] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
803[ 5.378142] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx group_id: 0x9101
804[ 5.378284] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0 dev_id: 0x9001
805[ 5.378293] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
806[ 5.378315] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx group_id: 0x9110
807[ 5.378452] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0 dev_id: 0x9010
808[ 5.378461] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
809[ 5.378481] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx group_id: 0x9111
810[ 5.378619] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0 dev_id: 0x9011
811[ 5.378628] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
812[ 5.378649] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
813[ 5.378787] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
814[ 5.378797] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
815[ 5.378816] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
816[ 5.378953] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
817[ 5.378962] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
818[ 5.378982] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
819[ 5.379121] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
820[ 5.379130] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
821[ 5.379150] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
822[ 5.379289] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
823[ 5.379298] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
824[ 5.379319] msm-dai-tdm soc:qcom,msm-dai-tdm-quin-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quin-rx group_id: 0x9140
825[ 5.379458] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-rx:qcom,msm-dai-q6-tdm-quin-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quin-rx:qcom,msm-dai-q6-tdm-quin-rx-0 dev_id: 0x9040
826[ 5.379467] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-rx:qcom,msm-dai-q6-tdm-quin-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
827[ 5.379488] msm-dai-tdm soc:qcom,msm-dai-tdm-quin-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quin-tx group_id: 0x9141
828[ 5.379624] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-tx:qcom,msm-dai-q6-tdm-quin-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quin-tx:qcom,msm-dai-q6-tdm-quin-tx-0 dev_id: 0x9041
829[ 5.379634] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-tx:qcom,msm-dai-q6-tdm-quin-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
830[ 5.385577] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
831[ 5.385592] msm8952-asoc-wcd c051000.sound: property qcom,cdc-us-euro-gpios in node /soc/sound not found -2
832[ 5.385606] msm8952-asoc-wcd c051000.sound: Headset is using internal micbias
833[ 5.386003] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
834[ 5.386010] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
835[ 5.388058] CHRDEV "avtimer" major number 223 goes below the dynamic allocation range
836[ 5.388355] audio_notifier_init: PDR register failed, ret = -19, disable service
837[ 5.388662] audio_notifer_reg_service: service SSR_ADSP is in use
838[ 5.388668] audio_notifer_reg_service: service SSR_MODEM is in use
839[ 5.389643] u32 classifier
840[ 5.389647] Actions configured
841[ 5.389654] Netfilter messages via NETLINK v0.30.
842[ 5.389790] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
843[ 5.389878] ctnetlink v0.93: registering with nfnetlink.
844[ 5.390129] xt_time: kernel timezone is -0000
845[ 5.390189] IPv4 over IPsec tunneling driver
846[ 5.390589] ip_tables: (C) 2000-2006 Netfilter Core Team
847[ 5.390711] arp_tables: arp_tables: (C) 2002 David S. Miller
848[ 5.390849] Initializing XFRM netlink socket
849[ 5.391038] NET: Registered protocol family 10
850[ 5.391691] mip6: Mobile IPv6
851[ 5.391703] ip6_tables: (C) 2000-2006 Netfilter Core Team
852[ 5.392104] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
853[ 5.392616] NET: Registered protocol family 17
854[ 5.392628] NET: Registered protocol family 15
855[ 5.392644] Ebtables v2.0 registered
856[ 5.392749] l2tp_core: L2TP core driver, V2.0
857[ 5.392758] l2tp_ppp: PPPoL2TP kernel driver, V2.0
858[ 5.392761] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
859[ 5.392771] l2tp_netlink: L2TP netlink interface
860[ 5.392796] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
861[ 5.392799] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
862[ 5.393652] NET: Registered protocol family 27
863[ 5.396133] minidump-id not found for adsp
864[ 5.396742] minidump-id not found for wcnss
865[ 5.396844] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
866[ 5.397293] minidump-id not found for modem
867[ 5.397552] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
868[ 5.397592] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped.
869[ 5.398683] dwc3 7000000.dwc3: Configuration mismatch. dr_mode forced to gadget
870[ 5.398690] Unhandled fault: synchronous external abort (0x96000010) at 0xffffff800c05d120
871[ 5.398752] ------------[ cut here ]------------
872[ 5.398764] Kernel BUG at dwc3_core_init+0x2c/0xd44 [verbose debug info unavailable]
873[ 5.398768] Internal error: Oops - BUG: 96000010 [#1] PREEMPT SMP
874[ 5.398772] Modules linked in:
875[ 5.398781] CPU: 6 PID: 377 Comm: kworker/6:2 Not tainted 4.9.210-perf+ #2
876[ 5.398785] Hardware name: Qualcomm Technologies, Inc. MSM8953 + PMI8950 QRD SKU3 (DT)
877[ 5.398794] Workqueue: events deferred_probe_work_func
878[ 5.398800] task: 0000000024517966 task.stack: 00000000a2a68eec
879[ 5.398804] PC is at dwc3_core_init+0x2c/0xd44
880[ 5.398809] LR is at dwc3_probe+0xa80/0xd0c
881[ 5.398812] pc : [<ffffff800888f108>] lr : [<ffffff8008890ef0>] pstate: 60400005
882[ 5.398815] sp : ffffffc0138e7740
883[ 5.398818] x29: ffffffc0138e7740 x28: ffffffc0144d8000
884[ 5.398824] x27: 0000000000000001 x26: 0000000000000000
885[ 5.398830] x25: 0000000000000000 x24: 0000000000000000
886[ 5.398835] x23: ffffffc0eac00650 x22: 0000000000000002
887[ 5.398841] x21: ffffffc0eac4bf00 x20: ffffffc013bdf810
888[ 5.398846] x19: ffffffc0eac00020 x18: ffffff800a2d8900
889[ 5.398852] x17: 000000000000003f x16: ffffff80084989d8
890[ 5.398857] x15: ffffff800941909b x14: 646167206f742064
891[ 5.398863] x13: 6563726f66206564 x12: 000000000000000a
892[ 5.398868] x11: 0000000000000000 x10: 0000000000000000
893[ 5.398874] x9 : 0000000000040900 x8 : ffffff800c05d100
894[ 5.398879] x7 : ffffff800a06a730 x6 : 0000000000000053
895[ 5.398885] x5 : 0000000000000000 x4 : ffffff800a48c6e9
896[ 5.398890] x3 : 0000000000000000 x2 : ffffff800c05d120
897[ 5.398896] x1 : 0000000000000000 x0 : ffffff8008890000
898[ 5.398902]
899[ 5.398902] PC: 0xffffff800888f0c8:
900[ 5.398905] f0c8 a8c17bfd d65f03c0 12800240 a8c17bfd d65f03c0 a9bb7bfd f9000bf9 a9025ff8
901[ 5.398923] f0e8 a90357f6 a9044ff4 910003fd f9430808 b9468019 aa0003f3 b0000000 91008102
902[ 5.398939] f108 b9400054 d5033d9f d0007821 910b4000 91072021 2a1403e3 9400099e 12103e88
903[ 5.398956] f128 52a66629 6b09011f 540000c0 52aaa669 6b09011f 54001c41 b9064a74 1400000d
904[ 5.398973]
905[ 5.398973] LR: 0xffffff8008890eb0:
906[ 5.398977] 0eb0 d000734a 913fc129 9138254a 710006df b0007821 9a890142 910a4021 aa0803e0
907[ 5.398993] 0ed0 97fafecb b9062a76 aa1303e0 97fffc0e 2a0003f8 350004c0 aa1303e0 97fff87c
908[ 5.399009] 0ef0 2a0003f8 3108141f 540003e0 35000338 b9464262 7100185f 540000e8 52800028
909[ 5.399026] 0f10 1ac22108 52800dc9 6a09011f 54000781 340000a2 b0007821 911bb421 aa1403e0
910[ 5.399043]
911[ 5.399043] SP: 0xffffffc0138e7700:
912[ 5.399046] 7700 08890ef0 ffffff80 138e7740 ffffffc0 0888f108 ffffff80 60400005 00000000
913[ 5.399062] 7720 eac4d600 ffffffc0 024000c0 00000000 ffffffff ffffffff 0000003f 00000000
914[ 5.399078] 7740 138e77b0 ffffffc0 08890ef0 ffffff80 0a4fa000 ffffff80 08890e08 ffffff80
915[ 5.399095] 7760 00000000 00000000 eac00650 ffffffc0 00000002 00000000 eac4bf00 ffffffc0
916[ 5.399112] Process kworker/6:2 (pid: 377, stack limit = 0x00000000a2a68eec)
917[ 5.399116] Call trace:
918[ 5.399121] Exception stack(0xffffffc0138e75e0 to 0xffffffc0138e7710)
919[ 5.399126] 75e0: 0000000060400005 0000000000000000 ffffff800888f108 0000000012748000
920[ 5.399131] 7600: 0000007fffffffff ffffffc0eac00020 ffffff8008890000 0000000000000000
921[ 5.399136] 7620: ffffff800c05d120 0000000000000000 ffffff800a48c6e9 0000000000000000
922[ 5.399140] 7640: 0000000000000053 ffffff800a06a730 ffffff800c05d100 0000000000040900
923[ 5.399145] 7660: 0000000000000000 0000000000000000 000000000000000a 6563726f66206564
924[ 5.399150] 7680: 646167206f742064 ffffff800941909b ffffff80084989d8 000000000000003f
925[ 5.399154] 76a0: ffffff800a2d8900 ffffffc0eac00020 ffffffc013bdf810 ffffffc0eac4bf00
926[ 5.399159] 76c0: 0000000000000002 ffffffc0eac00650 0000000000000000 0000000000000000
927[ 5.399163] 76e0: 0000000000000000 0000000000000001 ffffffc0144d8000 ffffffc0138e7740
928[ 5.399167] 7700: ffffff8008890ef0 ffffffc0138e7740
929[ 5.399172] [<0000000052796c7f>] dwc3_core_init+0x2c/0xd44
930[ 5.399177] [<00000000138065b0>] dwc3_probe+0xa80/0xd0c
931[ 5.399183] [<000000001333c2b8>] platform_drv_probe+0x64/0x9c
932[ 5.399189] [<000000002feb1f36>] driver_probe_device+0x3b8/0x3f8
933[ 5.399193] [<00000000ce2ccf2a>] __device_attach_driver+0x110/0x134
934[ 5.399199] [<00000000628f7959>] bus_for_each_drv+0x80/0xcc
935[ 5.399205] [<000000002222ff2d>] __device_attach+0xac/0x13c
936[ 5.399210] [<0000000033f13abc>] device_initial_probe+0x10/0x18
937[ 5.399215] [<0000000095d3ea2a>] bus_probe_device+0x30/0x98
938[ 5.399220] [<00000000607ab966>] device_add+0x6f8/0x8c0
939[ 5.399227] [<000000006d84b93d>] of_device_add+0x34/0x44
940[ 5.399232] [<000000000d8e807b>] of_platform_device_create_pdata+0x9c/0xd8
941[ 5.399236] [<0000000046d00af4>] of_platform_bus_create+0x1bc/0x390
942[ 5.399241] [<00000000a4f3eafc>] of_platform_populate+0x6c/0xac
943[ 5.399247] [<0000000087967ed4>] dwc3_msm_probe+0xe18/0x1598
944[ 5.399251] [<000000001333c2b8>] platform_drv_probe+0x64/0x9c
945[ 5.399256] [<000000002feb1f36>] driver_probe_device+0x3b8/0x3f8
946[ 5.399260] [<00000000ce2ccf2a>] __device_attach_driver+0x110/0x134
947[ 5.399265] [<00000000628f7959>] bus_for_each_drv+0x80/0xcc
948[ 5.399270] [<000000002222ff2d>] __device_attach+0xac/0x13c
949[ 5.399275] [<0000000033f13abc>] device_initial_probe+0x10/0x18
950[ 5.399279] [<0000000095d3ea2a>] bus_probe_device+0x30/0x98
951[ 5.399283] [<000000008dbd58ae>] deferred_probe_work_func+0x78/0xb0
952[ 5.399290] [<000000008de64c69>] process_one_work+0x268/0x4c4
953[ 5.399294] [<00000000105298af>] worker_thread+0x39c/0x4ec
954[ 5.399299] [<000000004a70d4d4>] kthread+0x134/0x14c
955[ 5.399305] [<0000000058553737>] ret_from_fork+0x10/0x20
956[ 5.399311] Code: b9468019 aa0003f3 b0000000 91008102 (b9400054)
957[ 5.399319] ---[ end trace 44f25210af63fb7d ]---
958[ 5.404967] Unable to handle kernel paging request at virtual address ffffffffffffffd8
959[ 5.404972] pgd = 000000009bab0917
960[ 5.404975] [ffffffffffffffd8] *pgd=0000000000000000, *pud=0000000000000000
961[ 5.405027] ------------[ cut here ]------------
962[ 5.405033] Kernel BUG at kthread_data+0x4/0xc [verbose debug info unavailable]
963[ 5.405037] Internal error: Oops: 96000005 [#2] PREEMPT SMP
964[ 5.405041] Modules linked in:
965[ 5.405047] CPU: 6 PID: 377 Comm: kworker/6:2 Tainted: G D 4.9.210-perf+ #2
966[ 5.405051] Hardware name: Qualcomm Technologies, Inc. MSM8953 + PMI8950 QRD SKU3 (DT)
967[ 5.405061] task: 0000000024517966 task.stack: 00000000a2a68eec
968[ 5.405065] PC is at kthread_data+0x4/0xc
969[ 5.405071] LR is at wq_worker_sleeping+0xc/0xc4
970[ 5.405075] pc : [<ffffff80080dceb4>] lr : [<ffffff80080d2c30>] pstate: 804001c5
971[ 5.405078] sp : ffffffc0138e73c0
972[ 5.405081] x29: ffffffc0138e73c0 x28: ffffff8009aa6c00
973[ 5.405086] x27: ffffff8009a9c018 x26: ffffffc0144d8000
974[ 5.405092] x25: ffffff800a00e7f0 x24: 0000000000000040
975[ 5.405098] x23: 0000000000000000 x22: ffffffc0144d8050
976[ 5.405103] x21: 0000000000000000 x20: ffffffc0144d8000
977[ 5.405109] x19: ffffffc0f1dd4c00 x18: 0000000000000400
978[ 5.405114] x17: 00000000000003e7 x16: 0000000000000400
979[ 5.405120] x15: 0000000001312cfe x14: ffffffc0eb12ad00
980[ 5.405126] x13: 0000000000000001 x12: 0000000000000000
981[ 5.405131] x11: 0000000000000001 x10: 0000000000000000
982[ 5.405137] x9 : 0000000000000000 x8 : 0000000000000000
983[ 5.405143] x7 : 0000000000000000 x6 : 000000000000001e
984[ 5.405148] x5 : 0000000000000140 x4 : 0000000000000000
985[ 5.405154] x3 : 0000000000000001 x2 : 0000000000000000
986[ 5.405159] x1 : ffffffc0144d8000 x0 : ffffffc0144d8000
987[ 5.405166]
988[ 5.405166] PC: 0xffffff80080dce74:
989[ 5.405169] ce74 a9414ff4 d3410500 a8c27bfd d65f03c0 aa1403e0 9401b9b7 37000080 2a1f03e8
990[ 5.405186] ce94 b5fffeb3 17fffff5 52800020 9401b9d7 12000008 b5fffe13 17fffff0 f943a408
991[ 5.405203] ceb4 f85d8100 d65f03c0 d10083ff a9017bfd 910043fd f0008f28 f947b108 52800102
992[ 5.405220] ced4 f9400108 f90007e8 f943a408 910003e0 f90003ff d100a101 94042ca5 f0008f29
993[ 5.405237]
994[ 5.405237] LR: 0xffffff80080d2bf0:
995[ 5.405240] 2bf0 f9800111 885f7d09 11000529 880a7d09 35ffffaa f9400bf3 a8c27bfd d65f03c0
996[ 5.405257] 2c10 52800028 391e5d28 d4210000 f9402408 17fffff3 a9bf7bfd 910003fd 940028a1
997[ 5.405274] 2c30 7940d008 52803909 6a09011f 540002c1 f9402408 d0008f6b b9400509 d538d08a
998[ 5.405290] 2c50 f9435d6b b86b694a 6b0a013f 54000080 d001108b 395e616c 3400034c 6b0a013f
999[ 5.405307]
1000[ 5.405307] SP: 0xffffffc0138e7380:
1001[ 5.405311] 7380 080d2c30 ffffff80 138e73c0 ffffffc0 080dceb4 ffffff80 804001c5 00000000
1002[ 5.405327] 73a0 144d8698 ffffffc0 00000000 00000000 ffffffff 0000007f 00000000 00000000
1003[ 5.405344] 73c0 138e7400 ffffffc0 092aac34 ffffff80 00000000 00000000 138e8808 ffffffc0
1004[ 5.405360] 73e0 144d8000 ffffffc0 080eece8 ffffff80 00000011 00000000 00040900 00000000
1005[ 5.405378] Process kworker/6:2 (pid: 377, stack limit = 0x00000000a2a68eec)
1006[ 5.405380] Call trace:
1007[ 5.405384] Exception stack(0xffffffc0138e7260 to 0xffffffc0138e7390)
1008[ 5.405389] 7260: 00000000804001c5 ffffffc0f1dd4c68 ffffff80080dceb4 0000000012748000
1009[ 5.405394] 7280: 0000007fffffffff ffffffc0f1dd4c00 ffffffc0144d8000 ffffffc0144d8000
1010[ 5.405398] 72a0: 0000000000000000 0000000000000001 0000000000000000 0000000000000140
1011[ 5.405403] 72c0: 000000000000001e 0000000000000000 0000000000000000 0000000000000000
1012[ 5.405407] 72e0: 0000000000000000 0000000000000001 0000000000000000 0000000000000001
1013[ 5.405412] 7300: ffffffc0eb12ad00 0000000001312cfe 0000000000000400 00000000000003e7
1014[ 5.405416] 7320: 0000000000000400 ffffffc0f1dd4c00 ffffffc0144d8000 0000000000000000
1015[ 5.405421] 7340: ffffffc0144d8050 0000000000000000 0000000000000040 ffffff800a00e7f0
1016[ 5.405426] 7360: ffffffc0144d8000 ffffff8009a9c018 ffffff8009aa6c00 ffffffc0138e73c0
1017[ 5.405430] 7380: ffffff80080d2c30 ffffffc0138e73c0
1018[ 5.405434] [<00000000832948f1>] kthread_data+0x4/0xc
1019[ 5.405441] [<00000000aa30d34a>] __schedule+0x304/0xcd4
1020[ 5.405446] [<00000000782e7f76>] do_task_dead+0x6c/0x74
1021[ 5.405452] [<0000000006b89aa5>] do_exit+0x9c0/0xa1c
1022[ 5.405458] [<00000000a8600daa>] arm64_notify_die+0x0/0x4c
1023[ 5.405463] [<00000000c894dd28>] arm64_notify_die+0x1c/0x4c
1024[ 5.405467] [<0000000080dc56bd>] do_mem_abort+0x9c/0xd0
1025[ 5.405471] Exception stack(0xffffffc0138e75e0 to 0xffffffc0138e7710)
1026[ 5.405475] 75e0: 0000000060400005 0000000000000000 ffffff800888f108 0000000012748000
1027[ 5.405480] 7600: 0000007fffffffff ffffffc0eac00020 ffffff8008890000 0000000000000000
1028[ 5.405485] 7620: ffffff800c05d120 0000000000000000 ffffff800a48c6e9 0000000000000000
1029[ 5.405489] 7640: 0000000000000053 ffffff800a06a730 ffffff800c05d100 0000000000040900
1030[ 5.405494] 7660: 0000000000000000 0000000000000000 000000000000000a 6563726f66206564
1031[ 5.405498] 7680: 646167206f742064 ffffff800941909b ffffff80084989d8 000000000000003f
1032[ 5.405503] 76a0: ffffff800a2d8900 ffffffc0eac00020 ffffffc013bdf810 ffffffc0eac4bf00
1033[ 5.405508] 76c0: 0000000000000002 ffffffc0eac00650 0000000000000000 0000000000000000
1034[ 5.405512] 76e0: 0000000000000000 0000000000000001 ffffffc0144d8000 ffffffc0138e7740
1035[ 5.405516] 7700: ffffff8008890ef0 ffffffc0138e7740
1036[ 5.405521] [<000000004a1f73a7>] el1_da+0x24/0xb4
1037[ 5.405526] [<00000000138065b0>] dwc3_probe+0xa80/0xd0c
1038[ 5.405531] [<000000001333c2b8>] platform_drv_probe+0x64/0x9c
1039[ 5.405537] [<000000002feb1f36>] driver_probe_device+0x3b8/0x3f8
1040[ 5.405541] [<00000000ce2ccf2a>] __device_attach_driver+0x110/0x134
1041[ 5.405546] [<00000000628f7959>] bus_for_each_drv+0x80/0xcc
1042[ 5.405550] [<000000002222ff2d>] __device_attach+0xac/0x13c
1043[ 5.405555] [<0000000033f13abc>] device_initial_probe+0x10/0x18
1044[ 5.405560] [<0000000095d3ea2a>] bus_probe_device+0x30/0x98
1045[ 5.405565] [<00000000607ab966>] device_add+0x6f8/0x8c0
1046[ 5.405570] [<000000006d84b93d>] of_device_add+0x34/0x44
1047[ 5.405575] [<000000000d8e807b>] of_platform_device_create_pdata+0x9c/0xd8
1048[ 5.405580] [<0000000046d00af4>] of_platform_bus_create+0x1bc/0x390
1049[ 5.405584] [<00000000a4f3eafc>] of_platform_populate+0x6c/0xac
1050[ 5.405589] [<0000000087967ed4>] dwc3_msm_probe+0xe18/0x1598
1051[ 5.405594] [<000000001333c2b8>] platform_drv_probe+0x64/0x9c
1052[ 5.405599] [<000000002feb1f36>] driver_probe_device+0x3b8/0x3f8
1053[ 5.405603] [<00000000ce2ccf2a>] __device_attach_driver+0x110/0x134
1054[ 5.405607] [<00000000628f7959>] bus_for_each_drv+0x80/0xcc
1055[ 5.405612] [<000000002222ff2d>] __device_attach+0xac/0x13c
1056[ 5.405617] [<0000000033f13abc>] device_initial_probe+0x10/0x18
1057[ 5.405621] [<0000000095d3ea2a>] bus_probe_device+0x30/0x98
1058[ 5.405625] [<000000008dbd58ae>] deferred_probe_work_func+0x78/0xb0
1059[ 5.405630] [<000000008de64c69>] process_one_work+0x268/0x4c4
1060[ 5.405634] [<00000000105298af>] worker_thread+0x39c/0x4ec
1061[ 5.405639] [<000000004a70d4d4>] kthread+0x134/0x14c
1062[ 5.405644] [<0000000058553737>] ret_from_fork+0x10/0x20
1063[ 5.405649] Code: 12000008 b5fffe13 17fffff0 f943a408 (f85d8100)
1064[ 5.405653] ---[ end trace 44f25210af63fb7e ]---
1065[ 5.411535] Fixing recursive fault but reboot is needed!