· 8 years ago · Jul 12, 2018, 12:00 PM
1mobile-horst rellig # dmesg
2[ 0.000000] Initializing cgroup subsys cpuset
3[ 0.000000] Initializing cgroup subsys cpu
4[ 0.000000] Linux version 3.3.0-rc6 (root@mobile-horst) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.0, pie-0.4.6) ) #6 SMP Fri Mar 9 23:21:29 CET 2012
5[ 0.000000] Command line: root=/dev/sda5 pcie.aspm=force quiet splash
6[ 0.000000] BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
8[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
9[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfe6d800 (usable)
10[ 0.000000] BIOS-e820: 00000000dfe6d800 - 00000000e0000000 (reserved)
11[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
12[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
13[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
14[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
15[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
16[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
17[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
18[ 0.000000] BIOS-e820: 0000000100002000 - 0000000120000000 (usable)
19[ 0.000000] NX (Execute Disable) protection: active
20[ 0.000000] DMI 2.4 present.
21[ 0.000000] DMI: Dell Inc. XPS M1330 /0U8042, BIOS A14 11/19/2008
22[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
23[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
24[ 0.000000] No AGP bridge found
25[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
26[ 0.000000] MTRR default type: uncachable
27[ 0.000000] MTRR fixed ranges enabled:
28[ 0.000000] 00000-9FFFF write-back
29[ 0.000000] A0000-BFFFF uncachable
30[ 0.000000] C0000-CFFFF write-protect
31[ 0.000000] D0000-EFFFF uncachable
32[ 0.000000] F0000-FFFFF write-protect
33[ 0.000000] MTRR variable ranges enabled:
34[ 0.000000] 0 base 000000000 mask F80000000 write-back
35[ 0.000000] 1 base 080000000 mask FC0000000 write-back
36[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
37[ 0.000000] 3 base 100000000 mask FE0000000 write-back
38[ 0.000000] 4 base 0DFF00000 mask FFFF00000 uncachable
39[ 0.000000] 5 disabled
40[ 0.000000] 6 disabled
41[ 0.000000] 7 disabled
42[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
43[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
44[ 0.000000] last_pfn = 0xdfe6d max_arch_pfn = 0x400000000
45[ 0.000000] initial memory mapped : 0 - 20000000
46[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
47[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfe6d000
48[ 0.000000] 0000000000 - 00dfe00000 page 2M
49[ 0.000000] 00dfe00000 - 00dfe6d000 page 4k
50[ 0.000000] kernel direct mapping tables up to dfe6d000 @ 1fffa000-20000000
51[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
52[ 0.000000] 0100000000 - 0120000000 page 2M
53[ 0.000000] kernel direct mapping tables up to 120000000 @ dfe67000-dfe6d000
54[ 0.000000] RAMDISK: 37a51000 - 37ff0000
55[ 0.000000] ACPI: RSDP 00000000000fbc00 00024 (v02 DELL )
56[ 0.000000] ACPI: XSDT 00000000dfe6f200 0005C (v01 DELL M08 27D80B13 ASL 00000061)
57[ 0.000000] ACPI: FACP 00000000dfe6f09c 000F4 (v04 DELL M08 27D80B13 ASL 00000061)
58[ 0.000000] ACPI: DSDT 00000000dfe6f800 05733 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
59[ 0.000000] ACPI: FACS 00000000dfe7e000 00040
60[ 0.000000] ACPI: HPET 00000000dfe6f300 00038 (v01 DELL M08 00000001 ASL 00000061)
61[ 0.000000] ACPI: APIC 00000000dfe6f400 00068 (v01 DELL M08 27D80B13 ASL 00000047)
62[ 0.000000] ACPI: MCFG 00000000dfe6f3c0 0003E (v16 DELL M08 27D80B13 ASL 00000061)
63[ 0.000000] ACPI: SLIC 00000000dfe6f49c 00176 (v01 DELL M08 27D80B13 ASL 00000061)
64[ 0.000000] ACPI: BOOT 00000000dfe6efc0 00028 (v01 DELL M08 27D80B13 ASL 00000061)
65[ 0.000000] ACPI: SSDT 00000000dfe6d9bc 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
66[ 0.000000] ACPI: Local APIC address 0xfee00000
67[ 0.000000] No NUMA configuration found
68[ 0.000000] Faking a node at 0000000000000000-0000000120000000
69[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
70[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
71[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
72[ 0.000000] Zone PFN ranges:
73[ 0.000000] DMA 0x00000010 -> 0x00001000
74[ 0.000000] DMA32 0x00001000 -> 0x00100000
75[ 0.000000] Normal 0x00100000 -> 0x00120000
76[ 0.000000] Movable zone start PFN for each node
77[ 0.000000] Early memory PFN ranges
78[ 0.000000] 0: 0x00000010 -> 0x0000009f
79[ 0.000000] 0: 0x00000100 -> 0x000dfe6d
80[ 0.000000] 0: 0x00100002 -> 0x00120000
81[ 0.000000] On node 0 totalpages: 1048058
82[ 0.000000] DMA zone: 64 pages used for memmap
83[ 0.000000] DMA zone: 5 pages reserved
84[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
85[ 0.000000] DMA32 zone: 16320 pages used for memmap
86[ 0.000000] DMA32 zone: 896685 pages, LIFO batch:31
87[ 0.000000] Normal zone: 2048 pages used for memmap
88[ 0.000000] Normal zone: 129022 pages, LIFO batch:31
89[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
90[ 0.000000] ACPI: Local APIC address 0xfee00000
91[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
92[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
93[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
94[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
95[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
96[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
97[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
98[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
99[ 0.000000] ACPI: IRQ0 used by override.
100[ 0.000000] ACPI: IRQ2 used by override.
101[ 0.000000] ACPI: IRQ9 used by override.
102[ 0.000000] Using ACPI (MADT) for SMP configuration information
103[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
104[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
105[ 0.000000] nr_irqs_gsi: 40
106[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
107[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
108[ 0.000000] PM: Registered nosave memory: 00000000dfe6d000 - 00000000dfe6e000
109[ 0.000000] PM: Registered nosave memory: 00000000dfe6e000 - 00000000e0000000
110[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
111[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
112[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
113[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
114[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000
115[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000
116[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
117[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000
118[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000
119[ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000
120[ 0.000000] PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000
121[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
122[ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000
123[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
124[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100002000
125[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
126[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
127[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88011fc00000 s76736 r8192 d21568 u1048576
128[ 0.000000] pcpu-alloc: s76736 r8192 d21568 u1048576 alloc=1*2097152
129[ 0.000000] pcpu-alloc: [0] 0 1
130[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029621
131[ 0.000000] Policy zone: Normal
132[ 0.000000] Kernel command line: root=/dev/sda5 pcie.aspm=force quiet splash
133[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
134[ 0.000000] Checking aperture...
135[ 0.000000] No AGP bridge found
136[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
137[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
138[ 0.000000] Memory: 4042096k/4718592k available (6127k kernel code, 526360k absent, 150136k reserved, 4761k data, 540k init)
139[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
140[ 0.000000] Hierarchical RCU implementation.
141[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
142[ 0.000000] Extended CMOS year: 2000
143[ 0.000000] Console: colour VGA+ 80x25
144[ 0.000000] console [tty0] enabled
145[ 0.000000] hpet clockevent registered
146[ 0.000000] Fast TSC calibration using PIT
147[ 0.000000] Detected 2094.718 MHz processor.
148[ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.43 BogoMIPS (lpj=2094718)
149[ 0.001008] pid_max: default: 32768 minimum: 301
150[ 0.001035] Security Framework initialized
151[ 0.001040] SELinux: Initializing.
152[ 0.001049] SELinux: Starting in permissive mode
153[ 0.001441] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
154[ 0.004027] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
155[ 0.005186] Mount-cache hash table entries: 256
156[ 0.005380] Initializing cgroup subsys cpuacct
157[ 0.005383] Initializing cgroup subsys freezer
158[ 0.005419] CPU: Physical Processor ID: 0
159[ 0.005421] CPU: Processor Core ID: 0
160[ 0.005423] mce: CPU supports 6 MCE banks
161[ 0.005431] CPU0: Thermal monitoring enabled (TM2)
162[ 0.005437] using mwait in idle threads.
163[ 0.005484] ACPI: Core revision 20120111
164[ 0.010193] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
165[ 0.020204] CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06
166[ 0.020998] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
167[ 0.020998] ... version: 2
168[ 0.020998] ... bit width: 40
169[ 0.020998] ... generic registers: 2
170[ 0.020998] ... value mask: 000000ffffffffff
171[ 0.020998] ... max period: 000000007fffffff
172[ 0.020998] ... fixed-purpose events: 3
173[ 0.020998] ... event mask: 0000000700000003
174[ 0.020998] Booting Node 0, Processors #1 Ok.
175[ 0.020998] smpboot cpu 1: start_ip = 9a000
176[ 0.032014] Brought up 2 CPUs
177[ 0.032018] Total of 2 processors activated (8378.87 BogoMIPS).
178[ 0.033180] RTC time: 20:18:20, date: 03/21/12
179[ 0.033180] NET: Registered protocol family 16
180[ 0.034034] ACPI: bus type pci registered
181[ 0.034047] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
182[ 0.034047] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
183[ 0.040006] PCI: Using configuration type 1 for base access
184[ 0.040015] dmi type 0xB1 record - unknown flag
185[ 0.047033] bio: create slab <bio-0> at 0
186[ 0.047035] ACPI: Added _OSI(Module Device)
187[ 0.047035] ACPI: Added _OSI(Processor Device)
188[ 0.047035] ACPI: Added _OSI(3.0 _SCP Extensions)
189[ 0.047035] ACPI: Added _OSI(Processor Aggregator Device)
190[ 0.048569] ACPI: EC: Look up EC in DSDT
191[ 0.057889] ACPI: SSDT 00000000dfe7e080 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
192[ 0.058153] ACPI: Dynamic OEM Table Load:
193[ 0.058156] ACPI: SSDT (null) 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
194[ 0.058421] ACPI: SSDT 00000000dfe6e4f2 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
195[ 0.058650] ACPI: Dynamic OEM Table Load:
196[ 0.058652] ACPI: SSDT (null) 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
197[ 0.058775] ACPI: SSDT 00000000dfe6de88 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
198[ 0.058989] ACPI: Dynamic OEM Table Load:
199[ 0.058996] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
200[ 0.059207] ACPI: SSDT 00000000dfe6e778 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
201[ 0.059431] ACPI: Dynamic OEM Table Load:
202[ 0.059434] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
203[ 0.059520] ACPI: SSDT 00000000dfe6e46d 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
204[ 0.059733] ACPI: Dynamic OEM Table Load:
205[ 0.059735] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
206[ 0.059913] ACPI: Interpreter enabled
207[ 0.059917] ACPI: (supports S0 S3 S4 S5)
208[ 0.059935] ACPI: Using IOAPIC for interrupt routing
209[ 0.094497] ACPI: No dock devices found.
210[ 0.094497] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
211[ 0.103193] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
212[ 0.120878] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
213[ 0.120881] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
214[ 0.120884] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
215[ 0.120886] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
216[ 0.120889] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf7ffffff]
217[ 0.120892] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff]
218[ 0.120895] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff]
219[ 0.120897] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff]
220[ 0.120900] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff]
221[ 0.120903] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff]
222[ 0.120905] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff]
223[ 0.120908] pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff]
224[ 0.120911] pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff]
225[ 0.121005] PCI host bridge to bus 0000:00
226[ 0.121005] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
227[ 0.121005] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
228[ 0.121005] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
229[ 0.121005] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
230[ 0.121005] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
231[ 0.121005] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff]
232[ 0.121007] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff]
233[ 0.121010] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff]
234[ 0.121012] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff]
235[ 0.121015] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff]
236[ 0.121017] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff]
237[ 0.121020] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff]
238[ 0.121022] pci_bus 0000:00: root bus resource [mem 0x120000000-0x317ffffff]
239[ 0.121034] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
240[ 0.121076] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
241[ 0.121109] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
242[ 0.121163] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
243[ 0.121219] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f]
244[ 0.121259] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
245[ 0.121315] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f]
246[ 0.121370] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
247[ 0.121394] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
248[ 0.121484] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
249[ 0.121517] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
250[ 0.121540] pci 0000:00:1b.0: reg 10: [mem 0xf6ffc000-0xf6ffffff 64bit]
251[ 0.121623] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
252[ 0.121653] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
253[ 0.121739] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
254[ 0.121772] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
255[ 0.121857] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
256[ 0.121892] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
257[ 0.121977] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
258[ 0.122016] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
259[ 0.122101] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
260[ 0.122132] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
261[ 0.122188] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f]
262[ 0.122228] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
263[ 0.122284] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f]
264[ 0.122327] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
265[ 0.122383] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f]
266[ 0.122437] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
267[ 0.122461] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
268[ 0.122550] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
269[ 0.122577] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
270[ 0.122663] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
271[ 0.122777] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
272[ 0.122783] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
273[ 0.122788] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
274[ 0.122795] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
275[ 0.122838] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
276[ 0.122855] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
277[ 0.122867] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
278[ 0.122879] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
279[ 0.122891] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
280[ 0.122904] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf]
281[ 0.122955] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
282[ 0.122982] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7]
283[ 0.122997] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb]
284[ 0.123010] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7]
285[ 0.123022] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb]
286[ 0.123034] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff]
287[ 0.123046] pci 0000:00:1f.2: reg 24: [mem 0xf6ffb800-0xf6ffbfff]
288[ 0.123094] pci 0000:00:1f.2: PME# supported from D3hot
289[ 0.123119] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
290[ 0.123136] pci 0000:00:1f.3: reg 10: [mem 0xf6ffb700-0xf6ffb7ff]
291[ 0.123178] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df]
292[ 0.123263] pci 0000:01:00.0: [10de:0427] type 0 class 0x000300
293[ 0.123282] pci 0000:01:00.0: reg 10: [mem 0xf5000000-0xf5ffffff]
294[ 0.123303] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
295[ 0.123324] pci 0000:01:00.0: reg 1c: [mem 0xf2000000-0xf3ffffff 64bit]
296[ 0.123338] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
297[ 0.123353] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
298[ 0.123430] pci 0000:00:01.0: PCI bridge to [bus 01-01]
299[ 0.123433] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
300[ 0.123437] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff]
301[ 0.123442] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
302[ 0.123502] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
303[ 0.123640] pci 0000:0c:00.0: [8086:4229] type 0 class 0x000280
304[ 0.123685] pci 0000:0c:00.0: reg 10: [mem 0xf1ffe000-0xf1ffffff 64bit]
305[ 0.123856] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
306[ 0.126031] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
307[ 0.126040] pci 0000:00:1c.1: bridge window [mem 0xf1f00000-0xf1ffffff]
308[ 0.126107] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
309[ 0.126112] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
310[ 0.126117] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf1efffff]
311[ 0.126125] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
312[ 0.126263] pci 0000:09:00.0: [14e4:1713] type 0 class 0x000200
313[ 0.126333] pci 0000:09:00.0: reg 10: [mem 0xf1bf0000-0xf1bfffff 64bit]
314[ 0.126645] pci 0000:09:00.0: PME# supported from D3hot D3cold
315[ 0.126779] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
316[ 0.126787] pci 0000:00:1c.5: bridge window [mem 0xf1b00000-0xf1bfffff]
317[ 0.126840] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00
318[ 0.126865] pci 0000:03:01.0: reg 10: [mem 0xf1aff800-0xf1afffff]
319[ 0.126954] pci 0000:03:01.0: supports D1 D2
320[ 0.126956] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
321[ 0.126980] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805
322[ 0.127006] pci 0000:03:01.1: reg 10: [mem 0xf1aff500-0xf1aff5ff]
323[ 0.127094] pci 0000:03:01.1: supports D1 D2
324[ 0.127097] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.127121] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880
326[ 0.127143] pci 0000:03:01.2: reg 10: [mem 0xf1aff600-0xf1aff6ff]
327[ 0.127232] pci 0000:03:01.2: supports D1 D2
328[ 0.127234] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
329[ 0.127259] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880
330[ 0.127281] pci 0000:03:01.3: reg 10: [mem 0xf1aff700-0xf1aff7ff]
331[ 0.127369] pci 0000:03:01.3: supports D1 D2
332[ 0.127371] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
333[ 0.127446] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
334[ 0.127454] pci 0000:00:1e.0: bridge window [mem 0xf1a00000-0xf1afffff]
335[ 0.127463] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
336[ 0.127466] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
337[ 0.127469] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
338[ 0.127472] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
339[ 0.127474] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
340[ 0.127477] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode)
341[ 0.127480] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
342[ 0.127483] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode)
343[ 0.127486] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode)
344[ 0.127489] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode)
345[ 0.127492] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode)
346[ 0.127495] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode)
347[ 0.127498] pci 0000:00:1e.0: bridge window [mem 0x120000000-0x317ffffff] (subtractive decode)
348[ 0.127536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
349[ 0.127782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
350[ 0.127872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
351[ 0.127912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
352[ 0.127958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
353[ 0.128016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
354[ 0.128065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
355[ 0.128109] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
356[ 0.138067] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
357[ 0.138134] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
358[ 0.139050] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
359[ 0.139117] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
360[ 0.139185] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
361[ 0.139254] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
362[ 0.139323] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
363[ 0.139386] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
364[ 0.139423] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
365[ 0.139423] vgaarb: loaded
366[ 0.139423] vgaarb: bridge control possible 0000:01:00.0
367[ 0.139423] SCSI subsystem initialized
368[ 0.139423] libata version 3.00 loaded.
369[ 0.140002] usbcore: registered new interface driver usbfs
370[ 0.140023] usbcore: registered new interface driver hub
371[ 0.140023] usbcore: registered new device driver usb
372[ 0.140023] Advanced Linux Sound Architecture Driver Version 1.0.24.
373[ 0.140023] PCI: Using ACPI for IRQ routing
374[ 0.142539] PCI: pci_cache_line_size set to 64 bytes
375[ 0.142703] reserve RAM buffer: 000000000009f000 - 000000000009ffff
376[ 0.142706] reserve RAM buffer: 00000000dfe6d800 - 00000000dfffffff
377[ 0.143062] NetLabel: Initializing
378[ 0.143062] NetLabel: domain hash size = 128
379[ 0.143062] NetLabel: protocols = UNLABELED CIPSOv4
380[ 0.143062] NetLabel: unlabeled traffic allowed by default
381[ 0.143062] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
382[ 0.143062] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
383[ 0.144998] Switching to clocksource hpet
384[ 0.151125] pnp: PnP ACPI init
385[ 0.151144] ACPI: bus type pnp registered
386[ 0.160178] pnp 00:00: [bus 00-ff]
387[ 0.160182] pnp 00:00: [io 0x0000-0x0cf7 window]
388[ 0.160184] pnp 00:00: [io 0x0cf8-0x0cff]
389[ 0.160186] pnp 00:00: [io 0x0d00-0xffff window]
390[ 0.160189] pnp 00:00: [mem 0x000a0000-0x000bffff window]
391[ 0.160191] pnp 00:00: [mem 0x000d0000-0x000dffff window]
392[ 0.160194] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
393[ 0.160196] pnp 00:00: [mem 0xfc000000-0xfebfffff window]
394[ 0.160198] pnp 00:00: [mem 0xfec10000-0xfecfffff window]
395[ 0.160201] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window]
396[ 0.160203] pnp 00:00: [mem 0xfed90000-0xfed9ffff window]
397[ 0.160205] pnp 00:00: [mem 0xfeda7000-0xfedfffff window]
398[ 0.160208] pnp 00:00: [mem 0xfee10000-0xff9fffff window]
399[ 0.160210] pnp 00:00: [mem 0xffc00000-0xffdfffff window]
400[ 0.160212] pnp 00:00: [mem 0x120000000-0x317ffffff window]
401[ 0.160340] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
402[ 0.160370] pnp 00:01: [irq 12]
403[ 0.160426] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
404[ 0.160444] pnp 00:02: [io 0x0060]
405[ 0.160446] pnp 00:02: [io 0x0064]
406[ 0.160448] pnp 00:02: [io 0x0062]
407[ 0.160449] pnp 00:02: [io 0x0066]
408[ 0.160455] pnp 00:02: [irq 1]
409[ 0.160514] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
410[ 0.160531] pnp 00:03: [io 0x0070-0x0071]
411[ 0.160537] pnp 00:03: [irq 8]
412[ 0.160539] pnp 00:03: [io 0x0072-0x0077]
413[ 0.160595] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
414[ 0.160614] pnp 00:04: [io 0x0061]
415[ 0.160616] pnp 00:04: [io 0x0063]
416[ 0.160618] pnp 00:04: [io 0x0065]
417[ 0.160619] pnp 00:04: [io 0x0067]
418[ 0.160680] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
419[ 0.160697] pnp 00:05: [io 0x0c80-0x0cff]
420[ 0.160790] system 00:05: [io 0x0c80-0x0cff] could not be reserved
421[ 0.160794] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
422[ 0.160814] pnp 00:06: [dma 4]
423[ 0.160816] pnp 00:06: [io 0x0000-0x000f]
424[ 0.160822] pnp 00:06: [io 0x0080-0x0085]
425[ 0.160824] pnp 00:06: [io 0x0087-0x008f]
426[ 0.160826] pnp 00:06: [io 0x00c0-0x00df]
427[ 0.160828] pnp 00:06: [io 0x0010-0x001f]
428[ 0.160830] pnp 00:06: [io 0x0090-0x0091]
429[ 0.160832] pnp 00:06: [io 0x0093-0x009f]
430[ 0.160892] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
431[ 0.160909] pnp 00:07: [io 0x00f0-0x00ff]
432[ 0.160915] pnp 00:07: [irq 13]
433[ 0.160974] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
434[ 0.161028] pnp 00:08: [mem 0xfed00000-0xfed003ff]
435[ 0.161108] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
436[ 0.161112] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
437[ 0.161238] pnp 00:09: [io 0x0900-0x097f]
438[ 0.161240] pnp 00:09: [io 0x0092]
439[ 0.161242] pnp 00:09: [io 0x00b2-0x00b3]
440[ 0.161244] pnp 00:09: [io 0x0020-0x0021]
441[ 0.161246] pnp 00:09: [io 0x00a0-0x00a1]
442[ 0.161249] pnp 00:09: [irq 0 disabled]
443[ 0.161251] pnp 00:09: [io 0x04d0-0x04d1]
444[ 0.161253] pnp 00:09: [io 0x1000-0x1005]
445[ 0.161255] pnp 00:09: [io 0x1008-0x100f]
446[ 0.161271] pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
447[ 0.161274] pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
448[ 0.161364] system 00:09: [io 0x0900-0x097f] has been reserved
449[ 0.161367] system 00:09: [io 0x04d0-0x04d1] has been reserved
450[ 0.161371] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
451[ 0.161389] pnp 00:0a: [io 0xf400-0xf4fe]
452[ 0.161391] pnp 00:0a: [io 0x0086]
453[ 0.161393] pnp 00:0a: [io 0x1006-0x1007]
454[ 0.161395] pnp 00:0a: [io 0x100a-0x1059]
455[ 0.161397] pnp 00:0a: [io 0x1060-0x107f]
456[ 0.161399] pnp 00:0a: [io 0x1080-0x10bf]
457[ 0.161401] pnp 00:0a: [io 0x10c0-0x10df]
458[ 0.161403] pnp 00:0a: [io 0x1010-0x102f]
459[ 0.161405] pnp 00:0a: [io 0x0809]
460[ 0.161420] pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
461[ 0.161424] pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
462[ 0.161427] pnp 00:0a: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
463[ 0.161431] pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
464[ 0.161515] system 00:0a: [io 0xf400-0xf4fe] has been reserved
465[ 0.161518] system 00:0a: [io 0x1080-0x10bf] has been reserved
466[ 0.161521] system 00:0a: [io 0x10c0-0x10df] has been reserved
467[ 0.161524] system 00:0a: [io 0x0809] has been reserved
468[ 0.161527] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
469[ 0.172250] pnp 00:0b: [mem 0x00000000-0x0009efff]
470[ 0.172253] pnp 00:0b: [mem 0x0009f000-0x0009ffff]
471[ 0.172255] pnp 00:0b: [mem 0x000c0000-0x000cffff]
472[ 0.172257] pnp 00:0b: [mem 0x000e0000-0x000fffff]
473[ 0.172260] pnp 00:0b: [mem 0x00100000-0xdfe6d7ff]
474[ 0.172262] pnp 00:0b: [mem 0xdfe6d800-0xdfefffff]
475[ 0.172264] pnp 00:0b: [mem 0xdff00000-0xdfffffff]
476[ 0.172266] pnp 00:0b: [mem 0xdff00000-0xe06fffff]
477[ 0.172268] pnp 00:0b: [mem 0xffe00000-0xffffffff]
478[ 0.172270] pnp 00:0b: [mem 0xffa00000-0xffbfffff]
479[ 0.172272] pnp 00:0b: [mem 0xfec00000-0xfec0ffff]
480[ 0.172274] pnp 00:0b: [mem 0xfee00000-0xfee0ffff]
481[ 0.172277] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
482[ 0.172279] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff]
483[ 0.172281] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff]
484[ 0.172286] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff]
485[ 0.172288] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff]
486[ 0.172291] pnp 00:0b: [mem 0xfed18000-0xfed1bfff]
487[ 0.172293] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
488[ 0.172301] pnp 00:0b: disabling [mem 0xdff00000-0xe06fffff] because it overlaps 0000:00:01.0 BAR 9 [mem 0xe0000000-0xefffffff 64bit pref]
489[ 0.172326] pnp 00:0b: disabling [mem 0xdff00000-0xe06fffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0xe0000000-0xefffffff 64bit pref]
490[ 0.172425] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved
491[ 0.172429] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved
492[ 0.172432] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
493[ 0.172435] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
494[ 0.172438] system 00:0b: [mem 0x00100000-0xdfe6d7ff] could not be reserved
495[ 0.172441] system 00:0b: [mem 0xdfe6d800-0xdfefffff] has been reserved
496[ 0.172444] system 00:0b: [mem 0xdff00000-0xdfffffff] has been reserved
497[ 0.172447] system 00:0b: [mem 0xffe00000-0xffffffff] has been reserved
498[ 0.172450] system 00:0b: [mem 0xffa00000-0xffbfffff] has been reserved
499[ 0.172453] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved
500[ 0.172456] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved
501[ 0.172459] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
502[ 0.172462] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved
503[ 0.172465] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved
504[ 0.172468] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved
505[ 0.172471] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved
506[ 0.172474] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved
507[ 0.172477] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
508[ 0.172481] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
509[ 0.172538] pnp: PnP ACPI: found 12 devices
510[ 0.172540] ACPI: ACPI bus type pnp unregistered
511[ 0.181229] PCI: max bus depth: 1 pci_try_num: 2
512[ 0.181295] pci 0000:00:1c.5: BAR 9: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
513[ 0.181299] pci 0000:00:1c.5: BAR 7: assigned [io 0x2000-0x2fff]
514[ 0.181303] pci 0000:00:1c.1: BAR 9: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
515[ 0.181307] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff]
516[ 0.181310] pci 0000:00:1c.0: BAR 8: assigned [mem 0xf0600000-0xf07fffff]
517[ 0.181314] pci 0000:00:1c.0: BAR 9: assigned [mem 0xf0800000-0xf09fffff 64bit pref]
518[ 0.181318] pci 0000:00:1c.0: BAR 7: assigned [io 0x4000-0x4fff]
519[ 0.181322] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
520[ 0.181325] pci 0000:00:01.0: PCI bridge to [bus 01-01]
521[ 0.181328] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
522[ 0.181332] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff]
523[ 0.181336] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
524[ 0.181341] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
525[ 0.181344] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
526[ 0.181351] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf07fffff]
527[ 0.181356] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf09fffff 64bit pref]
528[ 0.181365] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
529[ 0.181368] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
530[ 0.181375] pci 0000:00:1c.1: bridge window [mem 0xf1f00000-0xf1ffffff]
531[ 0.181381] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
532[ 0.181389] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
533[ 0.181393] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
534[ 0.181399] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf1efffff]
535[ 0.181405] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
536[ 0.181413] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
537[ 0.181417] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
538[ 0.181423] pci 0000:00:1c.5: bridge window [mem 0xf1b00000-0xf1bfffff]
539[ 0.181429] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
540[ 0.181437] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
541[ 0.181444] pci 0000:00:1e.0: bridge window [mem 0xf1a00000-0xf1afffff]
542[ 0.181502] pci 0000:00:1e.0: setting latency timer to 64
543[ 0.181506] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
544[ 0.181509] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
545[ 0.181511] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
546[ 0.181514] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
547[ 0.181516] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
548[ 0.181519] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff]
549[ 0.181521] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff]
550[ 0.181524] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff]
551[ 0.181526] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff]
552[ 0.181529] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff]
553[ 0.181532] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff]
554[ 0.181534] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff]
555[ 0.181537] pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff]
556[ 0.181539] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
557[ 0.181542] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf6efffff]
558[ 0.181544] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
559[ 0.181547] pci_bus 0000:0b: resource 0 [io 0x4000-0x4fff]
560[ 0.181550] pci_bus 0000:0b: resource 1 [mem 0xf0600000-0xf07fffff]
561[ 0.181552] pci_bus 0000:0b: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref]
562[ 0.181555] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff]
563[ 0.181558] pci_bus 0000:0c: resource 1 [mem 0xf1f00000-0xf1ffffff]
564[ 0.181560] pci_bus 0000:0c: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
565[ 0.181563] pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff]
566[ 0.181565] pci_bus 0000:0d: resource 1 [mem 0xf1c00000-0xf1efffff]
567[ 0.181568] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
568[ 0.181571] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
569[ 0.181573] pci_bus 0000:09: resource 1 [mem 0xf1b00000-0xf1bfffff]
570[ 0.181576] pci_bus 0000:09: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
571[ 0.181579] pci_bus 0000:03: resource 1 [mem 0xf1a00000-0xf1afffff]
572[ 0.181581] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
573[ 0.181583] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
574[ 0.181586] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
575[ 0.181588] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
576[ 0.181591] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf7ffffff]
577[ 0.181593] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff]
578[ 0.181596] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff]
579[ 0.181598] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff]
580[ 0.181601] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff]
581[ 0.181603] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff]
582[ 0.181606] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff]
583[ 0.181608] pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff]
584[ 0.181611] pci_bus 0000:03: resource 16 [mem 0x120000000-0x317ffffff]
585[ 0.181652] NET: Registered protocol family 2
586[ 0.181813] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
587[ 0.183272] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
588[ 0.187608] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
589[ 0.188254] TCP: Hash tables configured (established 524288 bind 65536)
590[ 0.188257] TCP reno registered
591[ 0.188269] UDP hash table entries: 2048 (order: 4, 65536 bytes)
592[ 0.188314] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
593[ 0.188559] NET: Registered protocol family 1
594[ 0.188687] RPC: Registered named UNIX socket transport module.
595[ 0.188690] RPC: Registered udp transport module.
596[ 0.188692] RPC: Registered tcp transport module.
597[ 0.188693] RPC: Registered tcp NFSv4.1 backchannel transport module.
598[ 0.188741] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080
599[ 0.188743] pci 0000:00:1a.0: Performing full reset
600[ 0.188775] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080
601[ 0.188778] pci 0000:00:1a.1: Performing full reset
602[ 0.188865] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080
603[ 0.188868] pci 0000:00:1d.0: Performing full reset
604[ 0.188895] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080
605[ 0.188898] pci 0000:00:1d.1: Performing full reset
606[ 0.188924] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080
607[ 0.188926] pci 0000:00:1d.2: Performing full reset
608[ 0.188996] pci 0000:01:00.0: Boot video device
609[ 0.189056] PCI: CLS 64 bytes, default 64
610[ 0.189120] Trying to unpack rootfs image as initramfs...
611[ 1.311244] Freeing initrd memory: 5756k freed
612[ 1.314013] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
613[ 1.314019] Placing 64MB software IO TLB between ffff8800dbe67000 - ffff8800dfe67000
614[ 1.314022] software IO TLB at phys 0xdbe67000 - 0xdfe67000
615[ 1.314046] Simple Boot Flag at 0x79 set to 0x1
616[ 1.314937] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
617[ 1.314948] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
618[ 1.315018] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
619[ 1.315110] Intel AES-NI instructions are not detected.
620[ 1.315449] audit: initializing netlink socket (disabled)
621[ 1.315475] type=2000 audit(1332361100.314:1): initialized
622[ 1.342031] HugeTLB registered 2 MB page size, pre-allocated 0 pages
623[ 1.346350] VFS: Disk quotas dquot_6.5.2
624[ 1.346444] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
625[ 1.347328] squashfs: version 4.0 (2009/01/31) Phillip Lougher
626[ 1.348093] fuse init (API version 7.18)
627[ 1.348336] SGI XFS with security attributes, large block/inode numbers, no debug enabled
628[ 1.349602] Btrfs loaded
629[ 1.349607] msgmni has been set to 7905
630[ 1.349725] SELinux: Registering netfilter hooks
631[ 1.350507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
632[ 1.350511] io scheduler noop registered
633[ 1.350513] io scheduler deadline registered (default)
634[ 1.351338] intel_idle: MWAIT substates: 0x3122220
635[ 1.351340] intel_idle: does not run on family 6 model 23
636[ 1.351498] ACPI: AC Adapter [AC] (on-line)
637[ 1.351679] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
638[ 1.352100] ACPI: Lid Switch [LID]
639[ 1.352187] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
640[ 1.352191] ACPI: Power Button [PBTN]
641[ 1.352271] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
642[ 1.352275] ACPI: Sleep Button [SBTN]
643[ 1.352507] Monitor-Mwait will be used to enter C-1 state
644[ 1.352537] Monitor-Mwait will be used to enter C-2 state
645[ 1.352566] Monitor-Mwait will be used to enter C-3 state
646[ 1.352573] Marking TSC unstable due to TSC halts in idle
647[ 1.352590] ACPI: acpi_idle registered with cpuidle
648[ 1.358391] thermal LNXTHERM:00: registered as thermal_zone0
649[ 1.358394] ACPI: Thermal Zone [THM] (52 C)
650[ 1.380720] ACPI: Battery Slot [BAT0] (battery present)
651[ 1.399452] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
652[ 1.400339] Non-volatile memory driver v1.3
653[ 1.400347] Linux agpgart interface v0.103
654[ 1.403048] brd: module loaded
655[ 1.404391] loop: module loaded
656[ 1.404676] ahci 0000:00:1f.2: version 3.0
657[ 1.404776] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
658[ 1.404781] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
659[ 1.404787] ahci 0000:00:1f.2: setting latency timer to 64
660[ 1.406590] scsi0 : ahci
661[ 1.406753] scsi1 : ahci
662[ 1.406892] scsi2 : ahci
663[ 1.407123] ata1: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 17
664[ 1.407126] ata2: DUMMY
665[ 1.407129] ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 17
666[ 1.407273] ata_piix 0000:00:1f.1: version 2.13
667[ 1.407317] ata_piix 0000:00:1f.1: setting latency timer to 64
668[ 1.407896] scsi3 : ata_piix
669[ 1.408056] scsi4 : ata_piix
670[ 1.408436] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
671[ 1.408439] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
672[ 1.408600] ata5: port disabled--ignoring
673[ 1.461055] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
674[ 1.461347] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
675[ 1.461350] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
676[ 1.461382] ehci_hcd 0000:00:1a.7: setting latency timer to 64
677[ 1.461386] ehci_hcd 0000:00:1a.7: EHCI Host Controller
678[ 1.461408] drivers/usb/core/inode.c: creating file 'devices'
679[ 1.461412] drivers/usb/core/inode.c: creating file '001'
680[ 1.461482] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
681[ 1.461493] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
682[ 1.461498] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
683[ 1.461530] ehci_hcd 0000:00:1a.7: debug port 1
684[ 1.461535] ehci_hcd 0000:00:1a.7: reset command 0000002 (park)=0 ithresh=0 period=1024 Reset HALT
685[ 1.465423] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
686[ 1.465426] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
687[ 1.465441] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
688[ 1.465447] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
689[ 1.471015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
690[ 1.471057] usb usb1: default language 0x0409
691[ 1.471064] usb usb1: udev 1, busnum 1, minor = 0
692[ 1.471066] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
693[ 1.471069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
694[ 1.471072] usb usb1: Product: EHCI Host Controller
695[ 1.471074] usb usb1: Manufacturer: Linux 3.3.0-rc6 ehci_hcd
696[ 1.471076] usb usb1: SerialNumber: 0000:00:1a.7
697[ 1.471166] usb usb1: usb_probe_device
698[ 1.471170] usb usb1: configuration #1 chosen from 1 choice
699[ 1.471177] usb usb1: adding 1-0:1.0 (config #1, interface 0)
700[ 1.471234] hub 1-0:1.0: usb_probe_interface
701[ 1.471237] hub 1-0:1.0: usb_probe_interface - got id
702[ 1.471240] hub 1-0:1.0: USB hub found
703[ 1.471244] hub 1-0:1.0: 4 ports detected
704[ 1.471246] hub 1-0:1.0: standalone hub
705[ 1.471248] hub 1-0:1.0: no power switching (usb 1.0)
706[ 1.471250] hub 1-0:1.0: individual port over-current protection
707[ 1.471252] hub 1-0:1.0: power on to power good time: 20ms
708[ 1.471257] hub 1-0:1.0: local power source is good
709[ 1.471259] hub 1-0:1.0: trying to enable port power on non-switchable hub
710[ 1.471292] drivers/usb/core/inode.c: creating file '001'
711[ 1.471348] ehci_hcd 0000:00:1d.7: setting latency timer to 64
712[ 1.471352] ehci_hcd 0000:00:1d.7: EHCI Host Controller
713[ 1.471360] drivers/usb/core/inode.c: creating file '002'
714[ 1.471425] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
715[ 1.471434] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
716[ 1.471439] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
717[ 1.471470] ehci_hcd 0000:00:1d.7: debug port 1
718[ 1.471475] ehci_hcd 0000:00:1d.7: reset command 0000002 (park)=0 ithresh=0 period=1024 Reset HALT
719[ 1.475373] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
720[ 1.475375] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
721[ 1.475390] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
722[ 1.475397] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
723[ 1.481015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
724[ 1.481039] usb usb2: default language 0x0409
725[ 1.481046] usb usb2: udev 1, busnum 2, minor = 128
726[ 1.481048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
727[ 1.481051] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
728[ 1.481053] usb usb2: Product: EHCI Host Controller
729[ 1.481055] usb usb2: Manufacturer: Linux 3.3.0-rc6 ehci_hcd
730[ 1.481057] usb usb2: SerialNumber: 0000:00:1d.7
731[ 1.481145] usb usb2: usb_probe_device
732[ 1.481148] usb usb2: configuration #1 chosen from 1 choice
733[ 1.481154] usb usb2: adding 2-0:1.0 (config #1, interface 0)
734[ 1.481212] hub 2-0:1.0: usb_probe_interface
735[ 1.481215] hub 2-0:1.0: usb_probe_interface - got id
736[ 1.481218] hub 2-0:1.0: USB hub found
737[ 1.481222] hub 2-0:1.0: 6 ports detected
738[ 1.481224] hub 2-0:1.0: standalone hub
739[ 1.481225] hub 2-0:1.0: no power switching (usb 1.0)
740[ 1.481227] hub 2-0:1.0: individual port over-current protection
741[ 1.481230] hub 2-0:1.0: power on to power good time: 20ms
742[ 1.481234] hub 2-0:1.0: local power source is good
743[ 1.481236] hub 2-0:1.0: trying to enable port power on non-switchable hub
744[ 1.481271] drivers/usb/core/inode.c: creating file '001'
745[ 1.481352] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
746[ 1.481354] ohci_hcd: block sizes: ed 80 td 96
747[ 1.481407] uhci_hcd: USB Universal Host Controller Interface driver
748[ 1.481439] uhci_hcd 0000:00:1a.0: setting latency timer to 64
749[ 1.481442] uhci_hcd 0000:00:1a.0: UHCI Host Controller
750[ 1.481448] drivers/usb/core/inode.c: creating file '003'
751[ 1.481511] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
752[ 1.481521] uhci_hcd 0000:00:1a.0: detected 2 ports
753[ 1.481526] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
754[ 1.481528] uhci_hcd 0000:00:1a.0: Performing full reset
755[ 1.481545] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
756[ 1.481550] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
757[ 1.481589] usb usb3: default language 0x0409
758[ 1.481595] usb usb3: udev 1, busnum 3, minor = 256
759[ 1.481597] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
760[ 1.481600] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
761[ 1.481602] usb usb3: Product: UHCI Host Controller
762[ 1.481604] usb usb3: Manufacturer: Linux 3.3.0-rc6 uhci_hcd
763[ 1.481606] usb usb3: SerialNumber: 0000:00:1a.0
764[ 1.481694] usb usb3: usb_probe_device
765[ 1.481696] usb usb3: configuration #1 chosen from 1 choice
766[ 1.481703] usb usb3: adding 3-0:1.0 (config #1, interface 0)
767[ 1.481762] hub 3-0:1.0: usb_probe_interface
768[ 1.481764] hub 3-0:1.0: usb_probe_interface - got id
769[ 1.481767] hub 3-0:1.0: USB hub found
770[ 1.481771] hub 3-0:1.0: 2 ports detected
771[ 1.481773] hub 3-0:1.0: standalone hub
772[ 1.481775] hub 3-0:1.0: no power switching (usb 1.0)
773[ 1.481777] hub 3-0:1.0: individual port over-current protection
774[ 1.481779] hub 3-0:1.0: power on to power good time: 2ms
775[ 1.481783] hub 3-0:1.0: local power source is good
776[ 1.481785] hub 3-0:1.0: trying to enable port power on non-switchable hub
777[ 1.481805] drivers/usb/core/inode.c: creating file '001'
778[ 1.481840] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
779[ 1.481867] uhci_hcd 0000:00:1a.1: setting latency timer to 64
780[ 1.481871] uhci_hcd 0000:00:1a.1: UHCI Host Controller
781[ 1.481877] drivers/usb/core/inode.c: creating file '004'
782[ 1.481948] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
783[ 1.481960] uhci_hcd 0000:00:1a.1: detected 2 ports
784[ 1.481965] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
785[ 1.481967] uhci_hcd 0000:00:1a.1: Performing full reset
786[ 1.481983] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
787[ 1.481997] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
788[ 1.482047] usb usb4: default language 0x0409
789[ 1.482053] usb usb4: udev 1, busnum 4, minor = 384
790[ 1.482055] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
791[ 1.482058] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
792[ 1.482060] usb usb4: Product: UHCI Host Controller
793[ 1.482062] usb usb4: Manufacturer: Linux 3.3.0-rc6 uhci_hcd
794[ 1.482064] usb usb4: SerialNumber: 0000:00:1a.1
795[ 1.482155] usb usb4: usb_probe_device
796[ 1.482158] usb usb4: configuration #1 chosen from 1 choice
797[ 1.482164] usb usb4: adding 4-0:1.0 (config #1, interface 0)
798[ 1.482230] hub 4-0:1.0: usb_probe_interface
799[ 1.482232] hub 4-0:1.0: usb_probe_interface - got id
800[ 1.482235] hub 4-0:1.0: USB hub found
801[ 1.482239] hub 4-0:1.0: 2 ports detected
802[ 1.482240] hub 4-0:1.0: standalone hub
803[ 1.482242] hub 4-0:1.0: no power switching (usb 1.0)
804[ 1.482244] hub 4-0:1.0: individual port over-current protection
805[ 1.482246] hub 4-0:1.0: power on to power good time: 2ms
806[ 1.482250] hub 4-0:1.0: local power source is good
807[ 1.482252] hub 4-0:1.0: trying to enable port power on non-switchable hub
808[ 1.482270] drivers/usb/core/inode.c: creating file '001'
809[ 1.482304] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
810[ 1.482333] uhci_hcd 0000:00:1d.0: setting latency timer to 64
811[ 1.482337] uhci_hcd 0000:00:1d.0: UHCI Host Controller
812[ 1.482342] drivers/usb/core/inode.c: creating file '005'
813[ 1.482407] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
814[ 1.482417] uhci_hcd 0000:00:1d.0: detected 2 ports
815[ 1.482422] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
816[ 1.482424] uhci_hcd 0000:00:1d.0: Performing full reset
817[ 1.482441] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
818[ 1.482446] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
819[ 1.482481] usb usb5: default language 0x0409
820[ 1.482486] usb usb5: udev 1, busnum 5, minor = 512
821[ 1.482489] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
822[ 1.482492] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
823[ 1.482494] usb usb5: Product: UHCI Host Controller
824[ 1.482496] usb usb5: Manufacturer: Linux 3.3.0-rc6 uhci_hcd
825[ 1.482498] usb usb5: SerialNumber: 0000:00:1d.0
826[ 1.482588] usb usb5: usb_probe_device
827[ 1.482590] usb usb5: configuration #1 chosen from 1 choice
828[ 1.482597] usb usb5: adding 5-0:1.0 (config #1, interface 0)
829[ 1.482660] hub 5-0:1.0: usb_probe_interface
830[ 1.482662] hub 5-0:1.0: usb_probe_interface - got id
831[ 1.482665] hub 5-0:1.0: USB hub found
832[ 1.482669] hub 5-0:1.0: 2 ports detected
833[ 1.482671] hub 5-0:1.0: standalone hub
834[ 1.482673] hub 5-0:1.0: no power switching (usb 1.0)
835[ 1.482675] hub 5-0:1.0: individual port over-current protection
836[ 1.482677] hub 5-0:1.0: power on to power good time: 2ms
837[ 1.482681] hub 5-0:1.0: local power source is good
838[ 1.482683] hub 5-0:1.0: trying to enable port power on non-switchable hub
839[ 1.482701] drivers/usb/core/inode.c: creating file '001'
840[ 1.482739] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
841[ 1.482764] uhci_hcd 0000:00:1d.1: setting latency timer to 64
842[ 1.482768] uhci_hcd 0000:00:1d.1: UHCI Host Controller
843[ 1.482773] drivers/usb/core/inode.c: creating file '006'
844[ 1.482841] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
845[ 1.482850] uhci_hcd 0000:00:1d.1: detected 2 ports
846[ 1.482855] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
847[ 1.482858] uhci_hcd 0000:00:1d.1: Performing full reset
848[ 1.482875] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
849[ 1.482880] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
850[ 1.482920] usb usb6: default language 0x0409
851[ 1.482926] usb usb6: udev 1, busnum 6, minor = 640
852[ 1.482928] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
853[ 1.482931] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
854[ 1.482933] usb usb6: Product: UHCI Host Controller
855[ 1.482935] usb usb6: Manufacturer: Linux 3.3.0-rc6 uhci_hcd
856[ 1.482937] usb usb6: SerialNumber: 0000:00:1d.1
857[ 1.483037] usb usb6: usb_probe_device
858[ 1.483040] usb usb6: configuration #1 chosen from 1 choice
859[ 1.483046] usb usb6: adding 6-0:1.0 (config #1, interface 0)
860[ 1.483107] hub 6-0:1.0: usb_probe_interface
861[ 1.483109] hub 6-0:1.0: usb_probe_interface - got id
862[ 1.483111] hub 6-0:1.0: USB hub found
863[ 1.483115] hub 6-0:1.0: 2 ports detected
864[ 1.483117] hub 6-0:1.0: standalone hub
865[ 1.483119] hub 6-0:1.0: no power switching (usb 1.0)
866[ 1.483121] hub 6-0:1.0: individual port over-current protection
867[ 1.483123] hub 6-0:1.0: power on to power good time: 2ms
868[ 1.483127] hub 6-0:1.0: local power source is good
869[ 1.483129] hub 6-0:1.0: trying to enable port power on non-switchable hub
870[ 1.483149] drivers/usb/core/inode.c: creating file '001'
871[ 1.483189] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
872[ 1.483212] uhci_hcd 0000:00:1d.2: setting latency timer to 64
873[ 1.483216] uhci_hcd 0000:00:1d.2: UHCI Host Controller
874[ 1.483222] drivers/usb/core/inode.c: creating file '007'
875[ 1.483290] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
876[ 1.483299] uhci_hcd 0000:00:1d.2: detected 2 ports
877[ 1.483304] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
878[ 1.483307] uhci_hcd 0000:00:1d.2: Performing full reset
879[ 1.483323] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
880[ 1.483328] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
881[ 1.483365] usb usb7: default language 0x0409
882[ 1.483371] usb usb7: udev 1, busnum 7, minor = 768
883[ 1.483373] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
884[ 1.483376] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
885[ 1.483378] usb usb7: Product: UHCI Host Controller
886[ 1.483380] usb usb7: Manufacturer: Linux 3.3.0-rc6 uhci_hcd
887[ 1.483382] usb usb7: SerialNumber: 0000:00:1d.2
888[ 1.483479] usb usb7: usb_probe_device
889[ 1.483481] usb usb7: configuration #1 chosen from 1 choice
890[ 1.483488] usb usb7: adding 7-0:1.0 (config #1, interface 0)
891[ 1.483547] hub 7-0:1.0: usb_probe_interface
892[ 1.483549] hub 7-0:1.0: usb_probe_interface - got id
893[ 1.483552] hub 7-0:1.0: USB hub found
894[ 1.483556] hub 7-0:1.0: 2 ports detected
895[ 1.483558] hub 7-0:1.0: standalone hub
896[ 1.483559] hub 7-0:1.0: no power switching (usb 1.0)
897[ 1.483561] hub 7-0:1.0: individual port over-current protection
898[ 1.483564] hub 7-0:1.0: power on to power good time: 2ms
899[ 1.483567] hub 7-0:1.0: local power source is good
900[ 1.483570] hub 7-0:1.0: trying to enable port power on non-switchable hub
901[ 1.483590] drivers/usb/core/inode.c: creating file '001'
902[ 1.483625] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
903[ 1.483738] usbcore: registered new interface driver usblp
904[ 1.483740] Initializing USB Mass Storage driver...
905[ 1.483811] usbcore: registered new interface driver usb-storage
906[ 1.483813] USB Mass Storage support registered.
907[ 1.483887] usbcore: registered new interface driver libusual
908[ 1.484033] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
909[ 1.486924] serio: i8042 KBD port at 0x60,0x64 irq 1
910[ 1.486930] serio: i8042 AUX port at 0x60,0x64 irq 12
911[ 1.487083] mousedev: PS/2 mouse device common for all mice
912[ 1.487403] usbcore: registered new interface driver wacom
913[ 1.487429] rtc_cmos 00:03: RTC can wake from S4
914[ 1.487578] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
915[ 1.487614] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
916[ 1.487657] i2c /dev entries driver
917[ 1.488161] md: linear personality registered for level -1
918[ 1.488164] md: raid0 personality registered for level 0
919[ 1.488166] md: raid1 personality registered for level 1
920[ 1.488322] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
921[ 1.488509] cpuidle: using governor ladder
922[ 1.488570] cpuidle: using governor menu
923[ 1.488572] EFI Variables Facility v0.08 2004-May-17
924[ 1.488771] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
925[ 1.489689] usbcore: registered new interface driver usbhid
926[ 1.489691] usbhid: USB HID core driver
927[ 1.490799] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
928[ 1.562528] ata4.00: ATAPI: HL-DT-ST DVD+/-RW GSA-S10N, A101, max UDMA/33
929[ 1.568352] ata4.00: configured for UDMA/33
930[ 1.571036] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
931[ 1.571040] hub 1-0:1.0: port 2: status 0501 change 0001
932[ 1.581067] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001403 0 ACK POWER sig=k CSC CONNECT
933[ 1.581073] hub 2-0:1.0: port 2: status 0501 change 0001
934[ 1.581100] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001803 0 ACK POWER sig=j CSC CONNECT
935[ 1.581106] hub 2-0:1.0: port 5: status 0501 change 0001
936[ 1.581121] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT
937[ 1.581126] hub 2-0:1.0: port 6: status 0501 change 0001
938[ 1.581151] uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00
939[ 1.582071] uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
940[ 1.582084] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
941[ 1.583081] uhci_hcd 0000:00:1d.2: port 1 portsc 008a,00
942[ 1.583098] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
943[ 1.583102] uhci_hcd 0000:00:1d.2: port 2 portsc 0082,00
944[ 1.602320] ALSA device list:
945[ 1.602323] #0: HDA Intel at 0xf6ffc000 irq 21
946[ 1.602479] Netfilter messages via NETLINK v0.30.
947[ 1.602493] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
948[ 1.602846] ctnetlink v0.93: registering with nfnetlink.
949[ 1.603298] ip_tables: (C) 2000-2006 Netfilter Core Team
950[ 1.603334] TCP cubic registered
951[ 1.603336] Initializing XFRM netlink socket
952[ 1.603785] NET: Registered protocol family 10
953[ 1.604331] ip6_tables: (C) 2000-2006 Netfilter Core Team
954[ 1.604383] IPv6 over IPv4 tunneling driver
955[ 1.605110] NET: Registered protocol family 17
956[ 1.605122] Registering the dns_resolver key type
957[ 1.605404] PM: Hibernation image not present or could not be loaded.
958[ 1.605418] registered taskstats version 1
959[ 1.605994] Magic number: 4:951:346
960[ 1.606164] tty tty63: hash matches
961[ 1.671045] hub 1-0:1.0: state 7 ports 4 chg 0004 evt 0000
962[ 1.671055] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
963[ 1.712057] ata3: SATA link down (SStatus 0 SControl 300)
964[ 1.712098] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
965[ 1.713828] ata1.00: ATA-8: ST9320423AS, 0002SDM1, max UDMA/133
966[ 1.713831] ata1.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 31/32)
967[ 1.715883] ata1.00: configured for UDMA/133
968[ 1.715983] scsi 0:0:0:0: Direct-Access ATA ST9320423AS 0002 PQ: 0 ANSI: 5
969[ 1.716237] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
970[ 1.716282] sd 0:0:0:0: [sda] Write Protect is off
971[ 1.716284] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
972[ 1.716305] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
973[ 1.716616] sd 0:0:0:0: Attached scsi generic sg0 type 0
974[ 1.719710] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-S10N A101 PQ: 0 ANSI: 5
975[ 1.722227] ehci_hcd 0000:00:1a.7: port 2 full speed --> companion
976[ 1.722232] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 003801 0 ACK POWER OWNER sig=j CONNECT
977[ 1.722236] hub 1-0:1.0: port 2 not reset yet, waiting 50ms
978[ 1.723762] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
979[ 1.723765] cdrom: Uniform CD-ROM driver Revision: 3.20
980[ 1.723923] sr 3:0:0:0: Attached scsi CD-ROM sr0
981[ 1.724115] sr 3:0:0:0: Attached scsi generic sg1 type 5
982[ 1.773044] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC
983[ 1.773073] hub 2-0:1.0: state 7 ports 6 chg 0064 evt 0000
984[ 1.773079] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
985[ 1.773086] ehci_hcd 0000:00:1d.7: port 2 low speed --> companion
986[ 1.784143] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
987[ 1.784642] sd 0:0:0:0: [sda] Attached SCSI disk
988[ 1.824044] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC
989[ 1.824070] hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
990[ 1.875298] ehci_hcd 0000:00:1d.7: port 5 full speed --> companion
991[ 1.875303] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 003801 0 ACK POWER OWNER sig=j CONNECT
992[ 1.875306] hub 2-0:1.0: port 5 not reset yet, waiting 50ms
993[ 1.926047] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 003002 0 ACK POWER OWNER sig=se0 CSC
994[ 1.926073] hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
995[ 1.956291] Freeing unused kernel memory: 540k freed
996[ 1.956472] Write protecting the kernel read-only data: 10240k
997[ 1.963394] Freeing unused kernel memory: 1772k freed
998[ 1.964213] firewire_core: created device fw0: GUID 464fc00006208090, S400
999[ 1.977301] ehci_hcd 0000:00:1d.7: port 6 high speed
1000[ 1.977307] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT
1001[ 2.025233] wmi: Mapper loaded
1002[ 2.028040] usb 2-6: new high-speed USB device number 4 using ehci_hcd
1003[ 2.028881] [drm] Initialized drm 1.1.0 20060810
1004[ 2.034134] VGA switcheroo: detected Optimus DSM method \ handle
1005[ 2.035912] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086700a2)
1006[ 2.039883] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
1007[ 2.079303] ehci_hcd 0000:00:1d.7: port 6 high speed
1008[ 2.079310] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT
1009[ 2.128633] [drm] nouveau 0000:01:00.0: ... appears to be valid
1010[ 2.128636] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
1011[ 2.128640] [drm] nouveau 0000:01:00.0: BIT BIOS found
1012[ 2.128643] [drm] nouveau 0000:01:00.0: Bios version 60.86.45.00
1013[ 2.128647] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
1014[ 2.129275] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
1015[ 2.129278] [drm] nouveau 0000:01:00.0: DCB version 4.0
1016[ 2.129282] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000323 00010034
1017[ 2.129285] [drm] nouveau 0000:01:00.0: DCB outp 01: 02011300 00000028
1018[ 2.129288] [drm] nouveau 0000:01:00.0: DCB outp 02: 02022312 00020010
1019[ 2.129290] [drm] nouveau 0000:01:00.0: DCB conn 00: 0041
1020[ 2.129293] [drm] nouveau 0000:01:00.0: DCB conn 01: 0100
1021[ 2.129295] [drm] nouveau 0000:01:00.0: DCB conn 02: 2261
1022[ 2.129297] [drm] nouveau 0000:01:00.0: DCB conn 03: 0310
1023[ 2.129300] [drm] nouveau 0000:01:00.0: DCB conn 04: 0311
1024[ 2.129302] [drm] nouveau 0000:01:00.0: DCB conn 05: 0313
1025[ 2.129308] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC42B
1026[ 2.140532] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0
1027[ 2.152570] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC76B
1028[ 2.169435] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD1C0
1029[ 2.169447] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD2B2
1030[ 2.170539] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD4AC
1031[ 2.170547] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD511
1032[ 2.179776] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
1033[ 2.190555] [drm] nouveau 0000:01:00.0: 0xD511: Condition still not met after 20ms, skipping following opcodes
1034[ 2.193808] [TTM] Zone kernel: Available graphics memory: 2025082 kiB.
1035[ 2.193812] [TTM] Initializing pool allocator.
1036[ 2.193818] [TTM] Initializing DMA pool allocator.
1037[ 2.193835] [drm] nouveau 0000:01:00.0: Detected 128MiB VRAM (GDDR3)
1038[ 2.195535] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
1039[ 2.216163] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
1040[ 2.216166] [drm] No driver support for vblank timestamp query.
1041[ 2.216835] usb 2-6: skipped 2 descriptors after configuration
1042[ 2.216838] usb 2-6: skipped 7 descriptors after interface
1043[ 2.216842] usb 2-6: skipped 1 descriptor after endpoint
1044[ 2.216845] usb 2-6: skipped 15 descriptors after interface
1045[ 2.217078] usb 2-6: default language 0x0409
1046[ 2.217097] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
1047[ 2.217102] [drm] nouveau 0000:01:00.0: 0: core 169MHz shader 338MHz memory 100MHz voltage 1150mV fanspeed 100%
1048[ 2.217107] [drm] nouveau 0000:01:00.0: 1: core 275MHz shader 550MHz memory 301MHz voltage 1150mV fanspeed 100%
1049[ 2.217111] [drm] nouveau 0000:01:00.0: 2: core 400MHz shader 800MHz memory 600MHz voltage 1150mV fanspeed 100%
1050[ 2.217116] [drm] nouveau 0000:01:00.0: c: core 200MHz shader 400MHz memory 351MHz voltage 1150mV
1051[ 2.218072] usb 2-6: udev 4, busnum 2, minor = 131
1052[ 2.218075] usb 2-6: New USB device found, idVendor=05a9, idProduct=7670
1053[ 2.218078] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1054[ 2.218081] usb 2-6: Product: Laptop Integrated Webcam
1055[ 2.218083] usb 2-6: Manufacturer: OmniVision Technologies, Inc. -7670-08.01.30.1
1056[ 2.218461] usb 2-6: usb_probe_device
1057[ 2.218466] usb 2-6: configuration #1 chosen from 1 choice
1058[ 2.218564] usb 2-6: adding 2-6:1.0 (config #1, interface 0)
1059[ 2.219418] usb 2-6: adding 2-6:1.1 (config #1, interface 1)
1060[ 2.219513] drivers/usb/core/inode.c: creating file '004'
1061[ 2.219542] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
1062[ 2.219553] uhci_hcd 0000:00:1a.0: port 2 portsc 0093,00
1063[ 2.219561] hub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
1064[ 2.323058] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
1065[ 2.425048] usb 3-2: new full-speed USB device number 2 using uhci_hcd
1066[ 2.545046] usb 3-2: ep0 maxpacket = 8
1067[ 2.574629] usb 3-2: default language 0x0409
1068[ 2.588630] usb 3-2: udev 2, busnum 3, minor = 257
1069[ 2.588632] usb 3-2: New USB device found, idVendor=0a5c, idProduct=4500
1070[ 2.588635] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1071[ 2.588637] usb 3-2: Product: BCM2045B2
1072[ 2.588639] usb 3-2: Manufacturer: Broadcom
1073[ 2.590049] usb 3-2: usb_probe_device
1074[ 2.590053] usb 3-2: configuration #1 chosen from 1 choice
1075[ 2.591640] usb 3-2: adding 3-2:1.0 (config #1, interface 0)
1076[ 2.592879] hub 3-2:1.0: usb_probe_interface
1077[ 2.592883] hub 3-2:1.0: usb_probe_interface - got id
1078[ 2.592886] hub 3-2:1.0: USB hub found
1079[ 2.594632] hub 3-2:1.0: 3 ports detected
1080[ 2.594634] hub 3-2:1.0: compound device; port removable status: FFF
1081[ 2.594637] hub 3-2:1.0: ganged power switching
1082[ 2.594638] hub 3-2:1.0: global over-current protection
1083[ 2.594641] hub 3-2:1.0: power on to power good time: 100ms
1084[ 2.595630] hub 3-2:1.0: hub controller current requirement: 100mA
1085[ 2.595632] hub 3-2:1.0: 100mA bus power budget for each child
1086[ 2.596631] hub 3-2:1.0: local power source is good
1087[ 2.596633] hub 3-2:1.0: no over-current condition exists
1088[ 2.596636] hub 3-2:1.0: enabling power on all ports
1089[ 2.599647] drivers/usb/core/inode.c: creating file '002'
1090[ 2.599669] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
1091[ 2.599682] uhci_hcd 0000:00:1d.0: port 2 portsc 01a3,00
1092[ 2.599691] hub 5-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
1093[ 2.700631] hub 3-2:1.0: port 1: status 0101 change 0001
1094[ 2.702629] hub 3-2:1.0: port 2: status 0101 change 0001
1095[ 2.703058] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
1096[ 2.704064] usb usb4: suspend_rh (auto-stop)
1097[ 2.704106] usb usb6: suspend_rh (auto-stop)
1098[ 2.704194] hub 3-2:1.0: port 3: status 0101 change 0001
1099[ 2.804052] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us
1100[ 2.805052] usb 5-2: new low-speed USB device number 2 using uhci_hcd
1101[ 2.946523] usb 5-2: skipped 1 descriptor after interface
1102[ 2.951522] usb 5-2: default language 0x0409
1103[ 2.966513] usb 5-2: udev 2, busnum 5, minor = 513
1104[ 2.966515] usb 5-2: New USB device found, idVendor=046d, idProduct=c50e
1105[ 2.966518] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1106[ 2.966521] usb 5-2: Product: USB RECEIVER
1107[ 2.966522] usb 5-2: Manufacturer: Logitech
1108[ 2.966827] usb 5-2: usb_probe_device
1109[ 2.966830] usb 5-2: configuration #1 chosen from 1 choice
1110[ 2.969534] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
1111[ 2.969629] usbhid 5-2:1.0: usb_probe_interface
1112[ 2.969631] usbhid 5-2:1.0: usb_probe_interface - got id
1113[ 2.987848] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input5
1114[ 2.988112] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2/input0
1115[ 2.988130] drivers/usb/core/inode.c: creating file '002'
1116[ 2.988153] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0002
1117[ 2.988166] uhci_hcd 0000:00:1d.2: port 1 portsc 0093,00
1118[ 2.988175] hub 7-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
1119[ 3.092058] hub 7-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
1120[ 3.194050] usb 7-1: new full-speed USB device number 2 using uhci_hcd
1121[ 3.314238] usb 7-1: ep0 maxpacket = 8
1122[ 3.335401] usb 7-1: default language 0x0409
1123[ 3.354403] usb 7-1: udev 2, busnum 7, minor = 769
1124[ 3.354407] usb 7-1: New USB device found, idVendor=0483, idProduct=2016
1125[ 3.354412] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1126[ 3.354416] usb 7-1: Product: Biometric Coprocessor
1127[ 3.354420] usb 7-1: Manufacturer: STMicroelectronics
1128[ 3.354548] usb 7-1: usb_probe_device
1129[ 3.354553] usb 7-1: configuration #1 chosen from 1 choice
1130[ 3.356418] usb 7-1: adding 7-1:1.0 (config #1, interface 0)
1131[ 3.356559] drivers/usb/core/inode.c: creating file '002'
1132[ 3.356590] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004
1133[ 3.356604] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0020
1134[ 3.356613] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
1135[ 3.356623] hub 3-2:1.0: state 7 ports 3 chg 000e evt 0000
1136[ 3.358625] hub 3-2:1.0: port 1, status 0101, change 0000, 12 Mb/s
1137[ 3.423632] usb 3-2.1: new full-speed USB device number 3 using uhci_hcd
1138[ 3.526724] usb 3-2.1: skipped 1 descriptor after interface
1139[ 3.529711] usb 3-2.1: default language 0x0409
1140[ 3.535717] usb 3-2.1: udev 3, busnum 3, minor = 258
1141[ 3.535722] usb 3-2.1: New USB device found, idVendor=413c, idProduct=8126
1142[ 3.535727] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
1143[ 3.535731] usb 3-2.1: Product: BCM2045
1144[ 3.535735] usb 3-2.1: Manufacturer: Broadcom Corp
1145[ 3.535972] usb 3-2.1: usb_probe_device
1146[ 3.535980] usb 3-2.1: configuration #1 chosen from 1 choice
1147[ 3.538685] usb 3-2.1: adding 3-2.1:1.0 (config #1, interface 0)
1148[ 3.539051] usb 3-2.1: adding 3-2.1:1.1 (config #1, interface 1)
1149[ 3.539271] usb 3-2.1: adding 3-2.1:1.2 (config #1, interface 2)
1150[ 3.539504] usb 3-2.1: adding 3-2.1:1.3 (config #1, interface 3)
1151[ 3.539662] drivers/usb/core/inode.c: creating file '003'
1152[ 3.539722] hub 3-2:1.0: 400mA power budget left
1153[ 3.542098] hub 3-2:1.0: port 2, status 0101, change 0000, 12 Mb/s
1154[ 3.606628] usb 3-2.2: new full-speed USB device number 4 using uhci_hcd
1155[ 3.623761] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x310000, bo ffff880116b41800
1156[ 3.623944] fbcon: nouveaufb (fb0) is primary device
1157[ 3.668226] Console: switching to colour frame buffer device 160x50
1158[ 3.671433] fb0: nouveaufb frame buffer device
1159[ 3.671436] drm: registered panic notifier
1160[ 3.671444] [drm] Initialized nouveau 0.0.16 dba002324abb50330391a8eb8a6ceade4bd8685f for 0000:01:00.0 on minor 0
1161[ 3.690041] usb 3-2.2: ep0 maxpacket = 8
1162[ 3.705029] hub 4-0:1.0: hub_suspend
1163[ 3.705037] usb usb4: bus auto-suspend, wakeup 1
1164[ 3.705040] usb usb4: suspend_rh
1165[ 3.705062] hub 6-0:1.0: hub_suspend
1166[ 3.705066] usb usb6: bus auto-suspend, wakeup 1
1167[ 3.705069] usb usb6: suspend_rh
1168[ 3.716624] usb 3-2.2: skipped 1 descriptor after interface
1169[ 3.721616] usb 3-2.2: default language 0x0409
1170[ 3.729617] usb 3-2.2: udev 4, busnum 3, minor = 259
1171[ 3.729620] usb 3-2.2: New USB device found, idVendor=0a5c, idProduct=4502
1172[ 3.729624] usb 3-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
1173[ 3.729627] usb 3-2.2: Manufacturer: Broadcom Corp
1174[ 3.729848] usb 3-2.2: usb_probe_device
1175[ 3.729854] usb 3-2.2: configuration #1 chosen from 1 choice
1176[ 3.732632] usb 3-2.2: adding 3-2.2:1.0 (config #1, interface 0)
1177[ 3.732803] usbhid 3-2.2:1.0: usb_probe_interface
1178[ 3.732807] usbhid 3-2.2:1.0: usb_probe_interface - got id
1179[ 3.737210] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input6
1180[ 3.737230] uhci_hcd 0000:00:1a.0: reserve dev 4 ep81-INT, period 8, phase 4, 17 us
1181[ 3.737474] generic-usb 0003:0A5C:4502.0002: input,hidraw1: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
1182[ 3.737508] drivers/usb/core/inode.c: creating file '004'
1183[ 3.737550] hub 3-2:1.0: 400mA power budget left
1184[ 3.741220] hub 3-2:1.0: port 3, status 0101, change 0000, 12 Mb/s
1185[ 3.805619] usb 3-2.3: new full-speed USB device number 5 using uhci_hcd
1186[ 3.889050] usb 3-2.3: ep0 maxpacket = 8
1187[ 3.914618] usb 3-2.3: skipped 1 descriptor after interface
1188[ 3.918614] usb 3-2.3: default language 0x0409
1189[ 3.926615] usb 3-2.3: udev 5, busnum 3, minor = 260
1190[ 3.926618] usb 3-2.3: New USB device found, idVendor=0a5c, idProduct=4503
1191[ 3.926622] usb 3-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0
1192[ 3.926626] usb 3-2.3: Manufacturer: Broadcom Corp
1193[ 3.926841] usb 3-2.3: usb_probe_device
1194[ 3.926847] usb 3-2.3: configuration #1 chosen from 1 choice
1195[ 3.929628] usb 3-2.3: adding 3-2.3:1.0 (config #1, interface 0)
1196[ 3.929710] usbhid 3-2.3:1.0: usb_probe_interface
1197[ 3.929713] usbhid 3-2.3:1.0: usb_probe_interface - got id
1198[ 3.934967] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input7
1199[ 3.935158] generic-usb 0003:0A5C:4503.0003: input,hidraw2: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
1200[ 3.935181] drivers/usb/core/inode.c: creating file '005'
1201[ 3.935204] hub 3-2:1.0: 400mA power budget left
1202[ 3.935209] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0002
1203[ 3.935222] hub 3-2:1.0: state 7 ports 3 chg 0000 evt 0008
1204[ 5.712062] hub 1-0:1.0: hub_suspend
1205[ 5.712074] usb usb1: bus auto-suspend, wakeup 1
1206[ 5.712077] ehci_hcd 0000:00:1a.7: suspend root hub
1207[ 6.337602] sdhci: Secure Digital Host Controller Interface driver
1208[ 6.337605] sdhci: Copyright(c) Pierre Ossman
1209[ 6.338488] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
1210[ 6.348567] Registered led device: mmc0::
1211[ 6.351044] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
1212[ 7.672623] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
1213[ 7.672628] EXT4-fs (sda5): write access will be enabled during recovery
1214[ 20.571197] EXT4-fs (sda5): orphan cleanup on readonly fs
1215[ 20.571209] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2495283
1216[ 20.571247] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2363916
1217[ 20.571302] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3152002
1218[ 20.571372] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3793024
1219[ 20.571412] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3792920
1220[ 20.655700] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4083424
1221[ 20.655780] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4087953
1222[ 20.655805] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4087955
1223[ 20.655826] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4087967
1224[ 20.707217] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3824550
1225[ 20.707297] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4083389
1226[ 20.707329] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4253738
1227[ 20.707375] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4253739
1228[ 20.707396] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4253740
1229[ 20.707417] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4253796
1230[ 20.707439] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4253797
1231[ 20.707459] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4253798
1232[ 20.707479] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4253803
1233[ 20.707502] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3801011
1234[ 20.722676] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3801015
1235[ 20.746079] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3801060
1236[ 20.799529] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4071565
1237[ 20.841897] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4219012
1238[ 20.882309] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4220478
1239[ 20.882368] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4220494
1240[ 20.882398] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3732815
1241[ 20.882443] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3732740
1242[ 20.935297] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3591152
1243[ 20.936171] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2759235
1244[ 20.953391] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2364170
1245[ 20.953446] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2364169
1246[ 20.953467] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2364168
1247[ 20.953488] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2364167
1248[ 20.953508] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2364166
1249[ 20.953529] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2364165
1250[ 20.953549] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2364164
1251[ 20.953570] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2364162
1252[ 20.994971] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2364100
1253[ 20.995061] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2364082
1254[ 20.995085] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2364068
1255[ 20.995105] EXT4-fs (sda5): 40 orphan inodes deleted
1256[ 20.995107] EXT4-fs (sda5): recovery complete
1257[ 21.419472] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
1258[ 21.551743] dracut: Checking ext4: /dev/sda5
1259[ 21.551811] dracut: issuing e2fsck -a /dev/sda5
1260[ 21.825363] dracut: /dev/sda5: clean, 1765362/4957632 files, 13973522/19791872 blocks (check in 4 mounts)
1261[ 21.825553] dracut: Remounting /dev/sda5 with -o noatime,ro
1262[ 21.860308] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
1263[ 22.066796] dracut: Mounted root filesystem /dev/sda5
1264[ 22.612577] dracut: Switching root
1265[ 30.006998] udevd[3679]: starting version 171
1266[ 31.854791] tg3.c:v3.122 (December 7, 2011)
1267[ 31.877956] Bluetooth: Core ver 2.16
1268[ 31.877989] NET: Registered protocol family 31
1269[ 31.877992] Bluetooth: HCI device and connection manager initialized
1270[ 31.877997] Bluetooth: HCI socket layer initialized
1271[ 31.878017] Bluetooth: L2CAP socket layer initialized
1272[ 31.878028] Bluetooth: SCO socket layer initialized
1273[ 31.892350] tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:21:9b:dc:25:f4
1274[ 31.892358] tg3 0000:09:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
1275[ 31.892364] tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
1276[ 31.892370] tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
1277[ 31.904826] cfg80211: Calling CRDA to update world regulatory domain
1278[ 31.969982] btusb 3-2.1:1.0: usb_probe_interface
1279[ 31.969989] btusb 3-2.1:1.0: usb_probe_interface - got id
1280[ 31.970247] btusb 3-2.1:1.2: usb_probe_interface
1281[ 31.970252] btusb 3-2.1:1.2: usb_probe_interface - got id
1282[ 31.970268] btusb 3-2.1:1.3: usb_probe_interface
1283[ 31.970271] btusb 3-2.1:1.3: usb_probe_interface - got id
1284[ 31.970302] usbcore: registered new interface driver btusb
1285[ 31.970780] uhci_hcd 0000:00:1a.0: reserve dev 3 ep81-INT, period 1, phase 0, 23 us
1286[ 32.064021] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
1287[ 32.064026] iwl4965: Copyright(c) 2003-2011 Intel Corporation
1288[ 32.064236] iwl4965 0000:0c:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
1289[ 32.103710] iwl4965 0000:0c:00.0: device EEPROM VER=0x36, CALIB=0x5
1290[ 32.103738] iwl4965 0000:0c:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
1291[ 32.223778] iwl4965 0000:0c:00.0: loaded firmware version 228.61.2.24
1292[ 32.224280] Registered led device: phy0-led
1293[ 32.224467] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
1294[ 34.057647] uhci_hcd 0000:00:1a.0: release dev 3 ep81-INT, period 1, phase 0, 23 us
1295[ 35.218097] Adding 2096444k swap on /dev/sda6. Priority:-1 extents:1 across:2096444k
1296[ 35.641575] EXT4-fs (sda5): re-mounted. Opts: (null)
1297[ 42.435605] ADDRCONF(NETDEV_UP): wlan0: link is not ready
1298[ 42.486596] ADDRCONF(NETDEV_UP): eth0: link is not ready
1299[ 48.035559] uhci_hcd 0000:00:1a.0: reserve dev 5 ep81-INT, period 8, phase 4, 14 us
1300[ 48.038315] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
1301[ 48.654693] wlan0: authenticate with 00:26:5a:27:e4:94 (try 1)
1302[ 48.657248] wlan0: authenticated
1303[ 48.662713] wlan0: associate with 00:26:5a:27:e4:94 (try 1)
1304[ 48.666560] wlan0: RX AssocResp from 00:26:5a:27:e4:94 (capab=0xc31 status=0 aid=1)
1305[ 48.666570] wlan0: associated
1306[ 48.666579] wlan0: moving STA 00:26:5a:27:e4:94 to state 1
1307[ 48.666584] wlan0: moving STA 00:26:5a:27:e4:94 to state 2
1308[ 48.712706] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
1309[ 49.682037] wlan0: moving STA 00:26:5a:27:e4:94 to state 3
1310[ 59.554047] wlan0: no IPv6 routers present
1311[ 68.346862] ata1.00: configured for UDMA/133
1312[ 68.346873] ata1: EH complete
1313[ 69.442966] EXT4-fs (sda5): re-mounted. Opts: commit=0