· 6 years ago · Oct 27, 2019, 11:50 PM
1ubuntu@ubuntu:~$ ./raspinfo
2System Information
3------------------
4
5Raspberry Pi 4 Model B Rev 1.1
6NAME="Ubuntu"
7VERSION="19.10 (Eoan Ermine)"
8ID=ubuntu
9ID_LIKE=debian
10
11cat: /etc/rpi-issue: No such file or directory
12
13Linux ubuntu 5.3.0-1008-raspi2 #9-Ubuntu SMP Fri Oct 18 13:26:35 UTC 2019 aarch64 aarch64 aarch64 GNU/Linux
14CPU part : 0xd08
15CPU revision : 3
16
17./raspinfo: line 31: vcgencmd: command not found
18Throttled flag :
19./raspinfo: line 32: vcgencmd: command not found
20Camera :
21
22Videocore information
23---------------------
24
25./raspinfo: line 39: vcgencmd: command not found
26
27./raspinfo: line 41: vcgencmd: command not found
28
29Filesystem information
30----------------------
31Filesystem 1K-blocks Used Available Use% Mounted on
32udev 1794956 0 1794956 0% /dev
33tmpfs 388448 3664 384784 1% /run
34/dev/mmcblk0p2 59961568 2470292 55014092 5% /
35tmpfs 1942232 0 1942232 0% /dev/shm
36tmpfs 5120 0 5120 0% /run/lock
37tmpfs 1942232 0 1942232 0% /sys/fs/cgroup
38/dev/loop0 80896 80896 0 100% /snap/core/7920
39/dev/loop1 50048 50048 0 100% /snap/lxd/12210
40/dev/mmcblk0p1 258095 124507 133589 49% /boot/firmware
41tmpfs 388444 0 388444 0% /run/user/1000
42
43Filename Type Size Used Priority
44
45Package version information
46---------------------------
47openbox:
48 Installed: (none)
49lxpanel:
50 Installed: (none)
51pcmanfm:
52 Installed: (none)
53
54Networking Information
55----------------------
56
57eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
58 inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
59 inet6 y::y.y.y.y prefixlen 64 scopeid 0x20<link>
60 ether m.m.m.m txqueuelen 1000 (Ethernet)
61 RX packets 3517 bytes 650061 (650.0 KB)
62 RX errors 0 dropped 981 overruns 0 frame 0
63 TX packets 1951 bytes 325881 (325.8 KB)
64 TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
65
66lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
67 inet x.x.x.x netmask x.x.x.x
68 inet6 ::1 prefixlen 128 scopeid 0x10<host>
69 loop txqueuelen 1000 (Local Loopback)
70 RX packets 256 bytes 19726 (19.7 KB)
71 RX errors 0 dropped 0 overruns 0 frame 0
72 TX packets 256 bytes 19726 (19.7 KB)
73 TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
74
75
76USB Information
77---------------
78
79/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
80/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
81/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
82
83config.txt
84----------
85
86./raspinfo: line 82: vcgencmd: command not found
87./raspinfo: line 83: vcgencmd: command not found
88
89cmdline.txt
90-----------
91coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=DC:A6:32:03:46:69 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait
92
93raspi-gpio settings
94-------------------
95
96./raspinfo: line 97: raspi-gpio: command not found
97
98vcdbg log messages
99------------------
100
101sudo: vcdbg: command not found
102
103dmesg log
104---------
105
106[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
107[ 0.000000] Linux version 5.3.0-1008-raspi2 (buildd@bos02-arm64-063) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #9-Ubuntu SMP Fri Oct 18 13:26:35 UTC 2019 (Ubuntu 5.3.0-1008.9-raspi2 5.3.1)
108[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1
109[ 0.000000] efi: Getting EFI parameters from FDT:
110[ 0.000000] efi: UEFI not found.
111[ 0.000000] cma: Reserved 256 MiB at 0x000000002b400000
112[ 0.000000] On node 0 totalpages: 1012736
113[ 0.000000] DMA32 zone: 3792 pages used for memmap
114[ 0.000000] DMA32 zone: 0 pages reserved
115[ 0.000000] DMA32 zone: 242688 pages, LIFO batch:63
116[ 0.000000] Normal zone: 12032 pages used for memmap
117[ 0.000000] Normal zone: 770048 pages, LIFO batch:63
118[ 0.000000] percpu: Embedded 32 pages/cpu s92312 r8192 d30568 u131072
119[ 0.000000] pcpu-alloc: s92312 r8192 d30568 u131072 alloc=32*4096
120[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
121[ 0.000000] Detected PIPT I-cache on CPU0
122[ 0.000000] CPU features: detected: EL2 vector hardening
123[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
124[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
125[ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
126[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912
127[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait
128[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
129[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
130[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
131[ 0.000000] software IO TLB: mapped [mem 0x27400000-0x2b400000] (64MB)
132[ 0.000000] Memory: 3589916K/4050944K available (11772K kernel code, 1234K rwdata, 4000K rodata, 4096K init, 1072K bss, 198884K reserved, 262144K cma-reserved)
133[ 0.000000] random: get_random_u64 called from kmem_cache_open+0x38/0x3d8 with crng_init=0
134[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
135[ 0.000000] ftrace: allocating 37124 entries in 146 pages
136[ 0.000000] rcu: Hierarchical RCU implementation.
137[ 0.000000] Tasks RCU enabled.
138[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
139[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
140[ 0.000000] GIC: Using split EOI/Deactivate mode
141[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
142[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
143[ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
144[ 0.000217] Console: colour dummy device 80x25
145[ 0.000548] printk: console [tty1] enabled
146[ 0.000606] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
147[ 0.000636] pid_max: default: 32768 minimum: 301
148[ 0.000852] LSM: Security Framework initializing
149[ 0.000906] Yama: becoming mindful.
150[ 0.000997] AppArmor: AppArmor initialized
151[ 0.001219] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
152[ 0.001283] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
153[ 0.001956] *** VALIDATE proc ***
154[ 0.002481] Disabling memory control group subsystem
155[ 0.002563] *** VALIDATE cgroup1 ***
156[ 0.002582] *** VALIDATE cgroup2 ***
157[ 0.003821] ASID allocator initialised with 32768 entries
158[ 0.004047] rcu: Hierarchical SRCU implementation.
159[ 0.005978] EFI services will not be available.
160[ 0.006786] smp: Bringing up secondary CPUs ...
161[ 0.007671] Detected PIPT I-cache on CPU1
162[ 0.007725] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
163[ 0.008808] Detected PIPT I-cache on CPU2
164[ 0.008846] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
165[ 0.009852] Detected PIPT I-cache on CPU3
166[ 0.009888] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
167[ 0.010044] smp: Brought up 1 node, 4 CPUs
168[ 0.010119] SMP: Total of 4 processors activated.
169[ 0.010137] CPU features: detected: 32-bit EL0 Support
170[ 0.010155] CPU features: detected: CRC32 instructions
171[ 0.014118] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
172[ 0.014143] CPU: All CPU(s) started at EL2
173[ 0.014196] alternatives: patching kernel code
174[ 0.016931] devtmpfs: initialized
175[ 0.024825] Enabled cp15_barrier support
176[ 0.024871] Enabled setend support
177[ 0.025330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
178[ 0.025369] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
179[ 0.032520] pinctrl core: initialized pinctrl subsystem
180[ 0.033131] DMI not present or invalid.
181[ 0.033781] NET: Registered protocol family 16
182[ 0.034388] audit: initializing netlink subsys (disabled)
183[ 0.034650] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1
184[ 0.035145] cpuidle: using governor ladder
185[ 0.035193] cpuidle: using governor menu
186[ 0.035544] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
187[ 0.037431] DMA: preallocated 1024 KiB pool for atomic allocations
188[ 0.037623] Serial: AMBA PL011 UART driver
189[ 0.041567] bcm2835-mbox fe00b880.mailbox: mailbox enabled
190[ 0.093516] bcm2835-dma: probe of fe007000.dma failed with error -5
191[ 0.095653] SCSI subsystem initialized
192[ 0.095903] libata version 3.00 loaded.
193[ 0.096076] usbcore: registered new interface driver usbfs
194[ 0.096130] usbcore: registered new interface driver hub
195[ 0.096241] usbcore: registered new device driver usb
196[ 0.096617] pps_core: LinuxPPS API ver. 1 registered
197[ 0.096636] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
198[ 0.096667] PTP clock support registered
199[ 0.096940] EDAC MC: Ver: 3.0.0
200[ 0.104028] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-08-15 12:03, variant start
201[ 0.107984] raspberrypi-firmware soc:firmware: Firmware hash is 9f8431fb7839c7f00f52b81f5822ddab2b31d0db
202[ 0.113162] NetLabel: Initializing
203[ 0.113183] NetLabel: domain hash size = 128
204[ 0.113198] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
205[ 0.113268] NetLabel: unlabeled traffic allowed by default
206[ 0.114016] clocksource: Switched to clocksource arch_sys_counter
207[ 0.198175] VFS: Disk quotas dquot_6.6.0
208[ 0.198286] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
209[ 0.198913] AppArmor: AppArmor Filesystem Enabled
210[ 0.199622] simple-framebuffer: probe of 0.framebuffer failed with error -12
211[ 0.208821] thermal_sys: Registered thermal governor 'fair_share'
212[ 0.208826] thermal_sys: Registered thermal governor 'bang_bang'
213[ 0.208852] thermal_sys: Registered thermal governor 'step_wise'
214[ 0.208869] thermal_sys: Registered thermal governor 'user_space'
215[ 0.208886] thermal_sys: Registered thermal governor 'power_allocator'
216[ 0.209493] NET: Registered protocol family 2
217[ 0.210233] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
218[ 0.210290] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
219[ 0.210495] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
220[ 0.210916] TCP: Hash tables configured (established 32768 bind 32768)
221[ 0.211127] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
222[ 0.211190] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
223[ 0.211452] NET: Registered protocol family 1
224[ 0.211491] NET: Registered protocol family 44
225[ 0.211514] PCI: CLS 0 bytes, default 64
226[ 0.211804] Trying to unpack rootfs image as initramfs...
227[ 0.836550] Freeing initrd memory: 28308K
228[ 0.837629] hw perfevents: no interrupt-affinity property for /arm-pmu, guessing.
229[ 0.838154] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
230[ 0.840362] Initialise system trusted keyrings
231[ 0.840420] Key type blacklist registered
232[ 0.840678] workingset: timestamp_bits=46 max_order=20 bucket_order=0
233[ 0.846751] zbud: loaded
234[ 0.848847] squashfs: version 4.0 (2009/01/31) Phillip Lougher
235[ 0.849800] fuse: init (API version 7.31)
236[ 0.883763] Key type asymmetric registered
237[ 0.883792] Asymmetric key parser 'x509' registered
238[ 0.883860] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
239[ 0.884108] io scheduler mq-deadline registered
240[ 0.888755] brcm-pcie fd500000.pcie: could not get clock
241[ 0.888829] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
242[ 0.888890] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
243[ 0.938049] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
244[ 0.938337] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
245[ 0.938362] pci_bus 0000:00: root bus resource [bus 00-01]
246[ 0.938386] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
247[ 0.938445] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
248[ 0.938642] pci 0000:00:00.0: PME# supported from D0 D3hot
249[ 0.941534] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
250[ 0.941776] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
251[ 0.941912] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
252[ 0.942355] pci 0000:01:00.0: PME# supported from D0 D3cold
253[ 0.942661] pci 0000:01:00.0: failed to get arch_dma_ops
254[ 0.945426] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
255[ 0.945470] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
256[ 0.945496] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
257[ 0.945537] pci 0000:00:00.0: PCI bridge to [bus 01]
258[ 0.945561] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
259[ 0.945808] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
260[ 0.946037] pcieport 0000:00:00.0: PME: Signaling with IRQ 42
261[ 0.946386] pcieport 0000:00:00.0: AER: enabled with IRQ 42
262[ 0.946655] pci 0000:01:00.0: enabling device (0000 -> 0002)
263[ 1.007167] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
264[ 1.009406] iproc-rng200 fe104000.rng: hwrng registered
265[ 1.009838] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
266[ 1.010644] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
267[ 1.010977] cacheinfo: Unable to detect cache hierarchy for CPU 0
268[ 1.338853] loop: module loaded
269[ 1.341098] spi-bcm2835 fe204000.spi: could not get clk: -517
270[ 1.341828] libphy: Fixed MDIO Bus: probed
271[ 1.341881] tun: Universal TUN/TAP device driver, 1.6
272[ 1.342121] PPP generic driver version 2.4.2
273[ 1.342339] usbcore: registered new interface driver lan78xx
274[ 1.342395] usbcore: registered new interface driver smsc95xx
275[ 1.342443] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
276[ 1.342473] ehci-pci: EHCI PCI platform driver
277[ 1.342543] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
278[ 1.342568] ohci-pci: OHCI PCI platform driver
279[ 1.342616] uhci_hcd: USB Universal Host Controller Interface driver
280[ 1.342915] xhci_hcd 0000:01:00.0: xHCI Host Controller
281[ 1.342962] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
282[ 1.343505] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
283[ 1.343698] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 43
284[ 1.344239] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
285[ 1.344266] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
286[ 1.344288] usb usb1: Product: xHCI Host Controller
287[ 1.344306] usb usb1: Manufacturer: Linux 5.3.0-1008-raspi2 xhci-hcd
288[ 1.344325] usb usb1: SerialNumber: 0000:01:00.0
289[ 1.344843] hub 1-0:1.0: USB hub found
290[ 1.344935] hub 1-0:1.0: 1 port detected
291[ 1.345447] xhci_hcd 0000:01:00.0: xHCI Host Controller
292[ 1.345476] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
293[ 1.345507] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
294[ 1.345909] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
295[ 1.345935] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
296[ 1.345957] usb usb2: Product: xHCI Host Controller
297[ 1.345974] usb usb2: Manufacturer: Linux 5.3.0-1008-raspi2 xhci-hcd
298[ 1.345993] usb usb2: SerialNumber: 0000:01:00.0
299[ 1.346570] hub 2-0:1.0: USB hub found
300[ 1.346636] hub 2-0:1.0: 4 ports detected
301[ 1.347543] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
302[ 1.347837] dwc_otg fe980000.usb: base=(____ptrval____)
303[ 1.550127] Core Release: 2.80a
304[ 1.550147] Setting default values for core params
305[ 1.550179] Finished setting default values for core params
306[ 1.678044] usb 1-1: new high-speed USB device number 2 using xhci_hcd
307[ 1.752632] Using Buffer DMA mode
308[ 1.752652] Periodic Transfer Interrupt Enhancement - disabled
309[ 1.752668] Multiprocessor Interrupt Enhancement - disabled
310[ 1.752685] OTG VER PARAM: 0, OTG VER FLAG: 0
311[ 1.752707] Dedicated Tx FIFOs mode
312[ 1.753692] WARN::dwc_otg_hcd_init:1043: FIQ DMA bounce buffers: virt = ffff000010d49000 dma = 0x00000000eb500000 len=9024
313[ 1.753738] FIQ FSM acceleration enabled for :
314 Non-periodic Split Transactions
315 Periodic Split Transactions
316 High-Speed Isochronous Endpoints
317 Interrupt/Control Split Transaction hack enabled
318[ 1.753776] dwc_otg: Microframe scheduler enabled
319[ 1.753805] WARN::hcd_init_fiq:496: MPHI regs_base at ffff0000102c5200
320[ 1.753886] dwc_otg fe980000.usb: DWC OTG Controller
321[ 1.753921] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3
322[ 1.753966] dwc_otg fe980000.usb: irq 24, io mem 0x00000000
323[ 1.754062] Init: Port Power? op_state=1
324[ 1.754079] Init: Power Port (0)
325[ 1.754336] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
326[ 1.754363] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
327[ 1.754385] usb usb3: Product: DWC OTG Controller
328[ 1.754404] usb usb3: Manufacturer: Linux 5.3.0-1008-raspi2 dwc_otg_hcd
329[ 1.754423] usb usb3: SerialNumber: fe980000.usb
330[ 1.754999] hub 3-0:1.0: USB hub found
331[ 1.755060] hub 3-0:1.0: 1 port detected
332[ 1.755699] dwc_otg: FIQ enabled
333[ 1.755707] dwc_otg: NAK holdoff enabled
334[ 1.755713] dwc_otg: FIQ split-transaction FSM enabled
335[ 1.755723] Module dwc_common_port init
336[ 1.756179] mousedev: PS/2 mouse device common for all mice
337[ 1.756638] i2c /dev entries driver
338[ 1.759301] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
339[ 1.759504] device-mapper: uevent: version 1.0.3
340[ 1.759813] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
341[ 1.759958] bcm2835-cpufreq: min=600000 max=1500000
342[ 1.761244] sdhci: Secure Digital Host Controller Interface driver
343[ 1.761252] sdhci: Copyright(c) Pierre Ossman
344[ 1.761431] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
345[ 1.761585] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
346[ 1.761593] sdhci-pltfm: SDHCI platform and OF driver helper
347[ 1.763279] ledtrig-cpu: registered to indicate activity on CPUs
348[ 1.763348] hidraw: raw HID events driver (C) Jiri Kosina
349[ 1.763792] vchiq: vchiq_init_state: slot_zero = (____ptrval____)
350[ 1.765974] NET: Registered protocol family 10
351[ 1.788421] Segment Routing with IPv6
352[ 1.788495] NET: Registered protocol family 17
353[ 1.788622] Key type dns_resolver registered
354[ 1.789109] registered taskstats version 1
355[ 1.789143] Loading compiled-in X.509 certificates
356[ 1.794226] Loaded X.509 cert 'Build time autogenerated kernel key: 8a543b0083d12dc0ff5d2ba72b66d5347614cc85'
357[ 1.794322] zswap: loaded using pool lzo/zbud
358[ 1.810340] usb 1-1: device descriptor read/64, error 18
359[ 1.812925] cryptd: max_cpu_qlen set to 1000
360[ 1.915048] Key type big_key registered
361[ 1.940195] Key type encrypted registered
362[ 1.940222] AppArmor: AppArmor sha1 policy hashing enabled
363[ 1.940244] ima: No TPM chip found, activating TPM-bypass!
364[ 1.940268] ima: Allocated hash algorithm: sha1
365[ 1.940292] No architecture policies found
366[ 1.940321] evm: Initialising EVM extended attributes:
367[ 1.940328] evm: security.selinux
368[ 1.940334] evm: security.SMACK64
369[ 1.940339] evm: security.SMACK64EXEC
370[ 1.940345] evm: security.SMACK64TRANSMUTE
371[ 1.940350] evm: security.SMACK64MMAP
372[ 1.940356] evm: security.apparmor
373[ 1.940361] evm: security.ima
374[ 1.940366] evm: security.capability
375[ 1.940372] evm: HMAC attrs: 0x1
376[ 1.943402] uart-pl011 fe201000.serial: cts_event_workaround enabled
377[ 1.943460] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 18, base_baud = 0) is a PL011 rev2
378[ 1.944751] printk: console [ttyS0] disabled
379[ 1.944785] fe215040.serial: ttyS0 at MMIO 0x0 (irq = 21, base_baud = 62500000) is a 16550
380[ 2.057480] usb 1-1: device descriptor read/64, error 18
381[ 2.065514] printk: console [ttyS0] enabled
382[ 2.306012] usb 1-1: new high-speed USB device number 3 using xhci_hcd
383[ 2.311115] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
384[ 2.471172] usb 1-1: device descriptor read/64, error 18
385[ 2.481007] spi-bcm2835 fe204000.spi: no tx-dma configuration found - not using dma mode
386[ 2.734829] usb 1-1: device descriptor read/64, error 18
387[ 2.746571] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
388[ 2.858181] usb usb1-port1: attempt power cycle
389[ 2.866229] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
390[ 3.516136] mmc-bcm2835 fe300000.mmcnr: mmc-bcm2835: Unable to initialise DMA channel. Falling back to PIO
391[ 3.530026] usb 1-1: new high-speed USB device number 4 using xhci_hcd
392[ 3.552055] hctosys: unable to open rtc device (rtc0)
393[ 3.557439] of_cfs_init
394[ 3.559986] of_cfs_init: OK
395[ 3.568011] Freeing unused kernel memory: 4096K
396[ 3.569678] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
397[ 3.579742] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
398[ 3.586036] Checked W+X mappings: passed, no W+X pages found
399[ 3.586869] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
400[ 3.591787] Run /init as init process
401[ 3.603814] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
402[ 3.610939] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
403[ 3.662306] usb 1-1: device descriptor read/64, error 18
404[ 3.666339] random: fast init done
405[ 3.685263] mmc1: new high speed SDIO card at address 0001
406[ 3.688014] random: systemd-udevd: uninitialized urandom read (16 bytes read)
407[ 3.698179] random: systemd-udevd: uninitialized urandom read (16 bytes read)
408[ 3.703473] random: udevadm: uninitialized urandom read (16 bytes read)
409[ 3.902312] usb 1-1: device descriptor read/64, error 18
410[ 4.079357] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
411[ 4.098689] bcmgenet fd580000.genet: failed to get enet clock
412[ 4.104568] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
413[ 4.113333] bcmgenet fd580000.genet: failed to get enet-wol clock
414[ 4.130896] bcmgenet fd580000.genet: failed to get enet-eee clock
415[ 4.146061] usb 1-1: new high-speed USB device number 5 using xhci_hcd
416[ 4.147726] mmc0: Failed to set 32-bit DMA mask.
417[ 4.157526] mmc0: No suitable DMA available - falling back to PIO
418[ 4.202533] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using PIO
419[ 4.290355] usb 1-1: device descriptor read/64, error 18
420[ 4.315241] mmc0: new ultra high speed DDR50 SDXC card at address 59b4
421[ 4.326484] mmcblk0: mmc0:59b4 7MKHS 58.4 GiB
422[ 4.342053] [drm] No displays found. Consider forcing hotplug if HDMI is attached
423[ 4.342155] mmcblk0: p1 p2
424[ 4.349723] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
425[ 4.413296] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
426[ 4.420119] [drm] No driver support for vblank timestamp query.
427[ 4.426146] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
428[ 4.459308] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
429[ 4.534346] usb 1-1: device descriptor read/64, error 18
430[ 4.650233] usb usb1-port1: unable to enumerate USB device
431[ 4.935059] unimac-mdio unimac-mdio.-19: DMA mask not set
432[ 4.950024] libphy: bcmgenet MII bus: probed
433[ 5.000340] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
434[ 6.346016] raid6: neonx8 gen() 3173 MB/s
435[ 6.398000] raid6: neonx8 xor() 2649 MB/s
436[ 6.450019] raid6: neonx4 gen() 2560 MB/s
437[ 6.502003] raid6: neonx4 xor() 2039 MB/s
438[ 6.554022] raid6: neonx2 gen() 2222 MB/s
439[ 6.606010] raid6: neonx2 xor() 2027 MB/s
440[ 6.658031] raid6: neonx1 gen() 1718 MB/s
441[ 6.710005] raid6: neonx1 xor() 1513 MB/s
442[ 6.762028] raid6: int64x8 gen() 1671 MB/s
443[ 6.814013] raid6: int64x8 xor() 1152 MB/s
444[ 6.866004] raid6: int64x4 gen() 1479 MB/s
445[ 6.918001] raid6: int64x4 xor() 1029 MB/s
446[ 6.970029] raid6: int64x2 gen() 1143 MB/s
447[ 7.022026] raid6: int64x2 xor() 916 MB/s
448[ 7.074052] raid6: int64x1 gen() 818 MB/s
449[ 7.126045] raid6: int64x1 xor() 582 MB/s
450[ 7.130375] raid6: using algorithm neonx8 gen() 3173 MB/s
451[ 7.135852] raid6: .... xor() 2649 MB/s, rmw enabled
452[ 7.140886] raid6: using neon recovery algorithm
453[ 7.149069] xor: measuring software checksum speed
454[ 7.193998] 8regs : 5944.000 MB/sec
455[ 7.237998] 32regs : 6781.000 MB/sec
456[ 7.281998] arm64_neon: 6288.000 MB/sec
457[ 7.286241] xor: using function: 32regs (6781.000 MB/sec)
458[ 7.293531] async_tx: api initialized (async)
459[ 7.438267] Btrfs loaded, crc32c=crc32c-generic
460[ 7.585475] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
461[ 8.257249] systemd[1]: System time before build time, advancing clock.
462[ 8.320079] systemd[1]: Inserted module 'autofs4'
463[ 8.390135] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
464[ 8.412371] systemd[1]: Detected architecture arm64.
465[ 8.476474] systemd[1]: Set hostname to <ubuntu>.
466[ 8.482616] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
467[ 9.152852] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
468[ 9.301257] systemd[1]: Created slice User and Session Slice.
469[ 9.307480] systemd[1]: Reached target Slices.
470[ 9.312543] systemd[1]: Listening on Journal Socket (/dev/log).
471[ 9.318753] systemd[1]: Reached target Swap.
472[ 9.328459] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
473[ 9.407556] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
474[ 9.895164] systemd-journald[709]: Received request to flush runtime journal from PID 1
475[ 9.900467] systemd-journald[709]: File /var/log/journal/c1aa1de5951d41a3a61c8d3c50ac6da2/system.journal corrupted or uncleanly shut down, renaming and replacing.
476[ 10.865684] argon-mem feb00000.hevc-decoder: argon-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
477[ 10.865909] argon-mem feb10000.argon-local-intc: argon-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
478[ 10.868478] argon-mem feb20000.h264-decoder: argon-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
479[ 10.868675] argon-mem feb30000.vp9-decoder: argon-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
480[ 10.960577] mc: Linux media interface: v0.10
481[ 11.070665] videodev: Linux video capture interface: v2.00
482[ 11.168887] cfg80211: Loading compiled-in X.509 certificates for regulatory database
483[ 11.208646] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
484[ 11.214960] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
485[ 11.214972] cfg80211: failed to load regulatory.db
486[ 11.335408] brcmfmac: F1 signature read @0x18000000=0x15264345
487[ 11.346434] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
488[ 11.356854] usbcore: registered new interface driver brcmfmac
489[ 11.542139] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
490[ 11.582143] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
491[ 11.634834] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
492[ 11.649084] Bluetooth: Core ver 2.22
493[ 11.649130] NET: Registered protocol family 31
494[ 11.649133] Bluetooth: HCI device and connection manager initialized
495[ 11.649149] Bluetooth: HCI socket layer initialized
496[ 11.649155] Bluetooth: L2CAP socket layer initialized
497[ 11.649165] Bluetooth: SCO socket layer initialized
498[ 11.870276] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
499[ 11.909319] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
500[ 15.698518] alua: device handler registered
501[ 15.701963] emc: device handler registered
502[ 15.780976] rdac: device handler registered
503[ 16.030345] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
504[ 16.030540] bcmgenet fd580000.genet eth0: Link is Down
505[ 16.154757] random: crng init done
506[ 16.154765] random: 7 urandom warning(s) missed due to ratelimiting
507[ 16.926132] audit: type=1400 audit(1555000124.667:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1121 comm="apparmor_parser"
508[ 16.927708] audit: type=1400 audit(1555000124.667:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1123 comm="apparmor_parser"
509[ 16.927724] audit: type=1400 audit(1555000124.667:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1123 comm="apparmor_parser"
510[ 16.935602] audit: type=1400 audit(1555000124.675:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1122 comm="apparmor_parser"
511[ 16.935618] audit: type=1400 audit(1555000124.675:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1122 comm="apparmor_parser"
512[ 16.935628] audit: type=1400 audit(1555000124.675:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1122 comm="apparmor_parser"
513[ 16.972613] audit: type=1400 audit(1555000124.711:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1125 comm="apparmor_parser"
514[ 16.972629] audit: type=1400 audit(1555000124.711:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1125 comm="apparmor_parser"
515[ 16.982523] audit: type=1400 audit(1555000124.723:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1120 comm="apparmor_parser"
516[ 16.982540] audit: type=1400 audit(1555000124.723:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1120 comm="apparmor_parser"
517[ 21.154101] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control off
518[ 21.154141] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready