· 6 years ago · Mar 26, 2020, 04:36 PM
1[ 0.000000] Linux version 5.3.0-28-generic (buildd@lcy01-amd64-009) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #30~18.04.1-Ubuntu SMP Fri Jan 17 06:14:09 UTC 2020 (Ubuntu 5.3.0-28.30~18.04.1-generic 5.3.13)
2[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-28-generic root=UUID=9c0e50e5-eea4-4f7e-94c7-993f85b48503 ro quiet splash vt.handoff=1
3[ 0.000000] KERNEL supported cpus:
4[ 0.000000] Intel GenuineIntel
5[ 0.000000] AMD AuthenticAMD
6[ 0.000000] Hygon HygonGenuine
7[ 0.000000] Centaur CentaurHauls
8[ 0.000000] zhaoxin Shanghai
9[ 0.000000] random: get_random_u32 called from bsp_init_amd+0x207/0x2c0 with crng_init=0
10[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
11[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
12[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
13[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
14[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
15[ 0.000000] BIOS-provided physical RAM map:
16[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
17[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
18[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
19[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7e7ffff] usable
20[ 0.000000] BIOS-e820: [mem 0x00000000c7e80000-0x00000000c7e97fff] ACPI data
21[ 0.000000] BIOS-e820: [mem 0x00000000c7e98000-0x00000000c7ebffff] ACPI NVS
22[ 0.000000] BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7efffff] reserved
23[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
24[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000436ffffff] usable
25[ 0.000000] NX (Execute Disable) protection: active
26[ 0.000000] SMBIOS 2.5 present.
27[ 0.000000] DMI: System manufacturer System Product Name/M5A78L-M LX3, BIOS 1401 05/05/2016
28[ 0.000000] tsc: Fast TSC calibration using PIT
29[ 0.000000] tsc: Detected 4017.734 MHz processor
30[ 0.007088] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
31[ 0.007089] e820: remove [mem 0x000a0000-0x000fffff] usable
32[ 0.015635] AGP: No AGP bridge found
33[ 0.015712] last_pfn = 0x437000 max_arch_pfn = 0x400000000
34[ 0.015716] MTRR default type: uncachable
35[ 0.015717] MTRR fixed ranges enabled:
36[ 0.015718] 00000-9FFFF write-back
37[ 0.015719] A0000-EFFFF uncachable
38[ 0.015720] F0000-FFFFF write-protect
39[ 0.015720] MTRR variable ranges enabled:
40[ 0.015721] 0 base 000000000000 mask FFFF80000000 write-back
41[ 0.015723] 1 base 000080000000 mask FFFFC0000000 write-back
42[ 0.015724] 2 base 0000C0000000 mask FFFFF8000000 write-back
43[ 0.015724] 3 disabled
44[ 0.015725] 4 disabled
45[ 0.015725] 5 disabled
46[ 0.015726] 6 disabled
47[ 0.015726] 7 disabled
48[ 0.015727] TOM2: 0000000437000000 aka 17264M
49[ 0.016533] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
50[ 0.016608] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
51[ 0.016613] last_pfn = 0xc7e80 max_arch_pfn = 0x400000000
52[ 0.020488] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
53[ 0.029556] check: Scanning 1 areas for low memory corruption
54[ 0.029560] Using GB pages for direct mapping
55[ 0.029562] BRK [0x1c9201000, 0x1c9201fff] PGTABLE
56[ 0.029564] BRK [0x1c9202000, 0x1c9202fff] PGTABLE
57[ 0.029565] BRK [0x1c9203000, 0x1c9203fff] PGTABLE
58[ 0.029604] BRK [0x1c9204000, 0x1c9204fff] PGTABLE
59[ 0.029605] BRK [0x1c9205000, 0x1c9205fff] PGTABLE
60[ 0.029771] BRK [0x1c9206000, 0x1c9206fff] PGTABLE
61[ 0.029811] BRK [0x1c9207000, 0x1c9207fff] PGTABLE
62[ 0.029891] RAMDISK: [mem 0x33103000-0x35878fff]
63[ 0.029900] ACPI: Early table checksum verification disabled
64[ 0.029904] ACPI: RSDP 0x00000000000FBA40 000024 (v02 ACPIAM)
65[ 0.029906] ACPI: XSDT 0x00000000C7E80100 000054 (v01 050516 XSDT1015 20160505 MSFT 00000097)
66[ 0.029911] ACPI: FACP 0x00000000C7E80290 0000F4 (v03 050516 FACP1015 20160505 MSFT 00000097)
67[ 0.029915] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20190703/tbfadt-624)
68[ 0.029918] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20190703/tbfadt-569)
69[ 0.029921] ACPI: DSDT 0x00000000C7E80460 00D3E9 (v01 A2035 A2035001 00000001 INTL 20060113)
70[ 0.029924] ACPI: FACS 0x00000000C7E98000 000040
71[ 0.029926] ACPI: FACS 0x00000000C7E98000 000040
72[ 0.029928] ACPI: APIC 0x00000000C7E80390 00008C (v01 050516 APIC1015 20160505 MSFT 00000097)
73[ 0.029931] ACPI: MCFG 0x00000000C7E80420 00003C (v01 050516 OEMMCFG 20160505 MSFT 00000097)
74[ 0.029934] ACPI: OEMB 0x00000000C7E98040 000072 (v01 050516 OEMB1015 20160505 MSFT 00000097)
75[ 0.029936] ACPI: HPET 0x00000000C7E8F460 000038 (v01 050516 OEMHPET 20160505 MSFT 00000097)
76[ 0.029939] ACPI: SSDT 0x00000000C7E8F4A0 001714 (v01 A M I POWERNOW 00000001 AMD 00000001)
77[ 0.029946] ACPI: Local APIC address 0xfee00000
78[ 0.030042] No NUMA configuration found
79[ 0.030043] Faking a node at [mem 0x0000000000000000-0x0000000436ffffff]
80[ 0.030052] NODE_DATA(0) allocated [mem 0x436fd5000-0x436ffffff]
81[ 0.030288] Zone ranges:
82[ 0.030289] DMA [mem 0x0000000000001000-0x0000000000ffffff]
83[ 0.030290] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
84[ 0.030291] Normal [mem 0x0000000100000000-0x0000000436ffffff]
85[ 0.030292] Device empty
86[ 0.030292] Movable zone start for each node
87[ 0.030294] Early memory node ranges
88[ 0.030295] node 0: [mem 0x0000000000001000-0x000000000009efff]
89[ 0.030296] node 0: [mem 0x0000000000100000-0x00000000c7e7ffff]
90[ 0.030297] node 0: [mem 0x0000000100000000-0x0000000436ffffff]
91[ 0.030305] Zeroed struct page in unavailable ranges: 482 pages
92[ 0.030306] Initmem setup node 0 [mem 0x0000000000001000-0x0000000436ffffff]
93[ 0.030308] On node 0 totalpages: 4189726
94[ 0.030308] DMA zone: 64 pages used for memmap
95[ 0.030309] DMA zone: 21 pages reserved
96[ 0.030310] DMA zone: 3998 pages, LIFO batch:0
97[ 0.030358] DMA32 zone: 12730 pages used for memmap
98[ 0.030359] DMA32 zone: 814720 pages, LIFO batch:63
99[ 0.041372] Normal zone: 52672 pages used for memmap
100[ 0.041374] Normal zone: 3371008 pages, LIFO batch:63
101[ 0.083152] ACPI: PM-Timer IO Port: 0x808
102[ 0.083155] ACPI: Local APIC address 0xfee00000
103[ 0.083170] IOAPIC[0]: apic_id 24, version 33, address 0xfec00000, GSI 0-23
104[ 0.083172] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
105[ 0.083173] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
106[ 0.083174] ACPI: IRQ0 used by override.
107[ 0.083175] ACPI: IRQ9 used by override.
108[ 0.083177] Using ACPI (MADT) for SMP configuration information
109[ 0.083178] ACPI: HPET id: 0x8300 base: 0xfed00000
110[ 0.083183] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
111[ 0.083194] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
112[ 0.083195] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
113[ 0.083196] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
114[ 0.083196] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
115[ 0.083197] PM: Registered nosave memory: [mem 0xc7e80000-0xc7e97fff]
116[ 0.083198] PM: Registered nosave memory: [mem 0xc7e98000-0xc7ebffff]
117[ 0.083199] PM: Registered nosave memory: [mem 0xc7ec0000-0xc7efffff]
118[ 0.083199] PM: Registered nosave memory: [mem 0xc7f00000-0xffdfffff]
119[ 0.083200] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
120[ 0.083201] [mem 0xc7f00000-0xffdfffff] available for PCI devices
121[ 0.083202] Booting paravirtualized kernel on bare hardware
122[ 0.083205] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
123[ 0.083210] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
124[ 0.083708] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
125[ 0.083714] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
126[ 0.083715] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
127[ 0.083739] Built 1 zonelists, mobility grouping on. Total pages: 4124239
128[ 0.083739] Policy zone: Normal
129[ 0.083741] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-28-generic root=UUID=9c0e50e5-eea4-4f7e-94c7-993f85b48503 ro quiet splash vt.handoff=1
130[ 0.086624] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
131[ 0.088325] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
132[ 0.088355] mem auto-init: stack:off, heap alloc:on, heap free:off
133[ 0.099894] AGP: Checking aperture...
134[ 0.108436] AGP: No AGP bridge found
135[ 0.108439] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
136[ 0.108440] AGP: Your BIOS doesn't leave an aperture memory hole
137[ 0.108441] AGP: Please enable the IOMMU option in the BIOS setup
138[ 0.108441] AGP: This costs you 64MB of RAM
139[ 0.108443] AGP: Mapping aperture over RAM [mem 0xbc000000-0xbfffffff] (65536KB)
140[ 0.108445] PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff]
141[ 0.165869] Memory: 16265260K/16758904K available (14339K kernel code, 2370K rwdata, 4668K rodata, 2660K init, 5076K bss, 493644K reserved, 0K cma-reserved)
142[ 0.166027] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
143[ 0.166040] ftrace: allocating 42927 entries in 168 pages
144[ 0.183223] rcu: Hierarchical RCU implementation.
145[ 0.183224] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
146[ 0.183224] Tasks RCU enabled.
147[ 0.183225] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
148[ 0.183226] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
149[ 0.186123] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
150[ 0.186451] spurious 8259A interrupt: IRQ7.
151[ 0.186465] vt handoff: transparent VT on vt#1
152[ 0.186472] Console: colour dummy device 80x25
153[ 0.186475] printk: console [tty0] enabled
154[ 0.186490] ACPI: Core revision 20190703
155[ 0.186604] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
156[ 0.186617] APIC: Switch to symmetric I/O mode setup
157[ 0.187068] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
158[ 0.206620] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39e9cc94b81, max_idle_ns: 440795204263 ns
159[ 0.206623] Calibrating delay loop (skipped), value calculated using timer frequency.. 8035.46 BogoMIPS (lpj=16070936)
160[ 0.206625] pid_max: default: 32768 minimum: 301
161[ 0.206655] LSM: Security Framework initializing
162[ 0.206664] Yama: becoming mindful.
163[ 0.206713] AppArmor: AppArmor initialized
164[ 0.206787] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
165[ 0.206834] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
166[ 0.206976] *** VALIDATE proc ***
167[ 0.207027] *** VALIDATE cgroup1 ***
168[ 0.207028] *** VALIDATE cgroup2 ***
169[ 0.207068] LVT offset 1 assigned for vector 0xf9
170[ 0.207071] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
171[ 0.207072] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
172[ 0.207074] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
173[ 0.207076] Spectre V2 : Mitigation: Full AMD retpoline
174[ 0.207076] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
175[ 0.207077] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
176[ 0.207078] Spectre V2 : User space: Vulnerable
177[ 0.207079] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
178[ 0.207235] Freeing SMP alternatives memory: 40K
179[ 0.322419] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
180[ 0.322530] Performance Events: Fam15h core perfctr, AMD PMU driver.
181[ 0.322534] ... version: 0
182[ 0.322534] ... bit width: 48
183[ 0.322534] ... generic registers: 6
184[ 0.322535] ... value mask: 0000ffffffffffff
185[ 0.322535] ... max period: 00007fffffffffff
186[ 0.322536] ... fixed-purpose events: 0
187[ 0.322536] ... event mask: 000000000000003f
188[ 0.322569] rcu: Hierarchical SRCU implementation.
189[ 0.322621] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
190[ 0.322621] smp: Bringing up secondary CPUs ...
191[ 0.322621] x86: Booting SMP configuration:
192[ 0.322621] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
193[ 0.353440] smp: Brought up 1 node, 8 CPUs
194[ 0.353440] smpboot: Max logical packages: 1
195[ 0.353440] smpboot: Total of 8 processors activated (64283.74 BogoMIPS)
196[ 0.355195] devtmpfs: initialized
197[ 0.355195] x86/mm: Memory block size: 128MB
198[ 0.356415] PM: Registering ACPI NVS region [mem 0xc7e98000-0xc7ebffff] (163840 bytes)
199[ 0.358658] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
200[ 0.358658] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
201[ 0.358739] pinctrl core: initialized pinctrl subsystem
202[ 0.358841] PM: RTC time: 17:04:31, date: 2020-03-26
203[ 0.358968] NET: Registered protocol family 16
204[ 0.359046] audit: initializing netlink subsys (disabled)
205[ 0.359060] audit: type=2000 audit(1585242271.172:1): state=initialized audit_enabled=0 res=1
206[ 0.359060] EISA bus registered
207[ 0.359060] cpuidle: using governor ladder
208[ 0.359060] cpuidle: using governor menu
209[ 0.359060] ACPI: bus type PCI registered
210[ 0.359060] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
211[ 0.359060] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
212[ 0.359060] PCI: not using MMCONFIG
213[ 0.359060] PCI: Using configuration type 1 for base access
214[ 0.359060] PCI: Using configuration type 1 for extended access
215[ 0.359594] mtrr: your CPUs had inconsistent variable MTRR settings
216[ 0.359595] mtrr: probably your BIOS does not setup all CPUs.
217[ 0.359595] mtrr: corrected configuration.
218[ 0.360778] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
219[ 0.360778] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
220[ 0.362719] ACPI: Added _OSI(Module Device)
221[ 0.362720] ACPI: Added _OSI(Processor Device)
222[ 0.362721] ACPI: Added _OSI(3.0 _SCP Extensions)
223[ 0.362721] ACPI: Added _OSI(Processor Aggregator Device)
224[ 0.362722] ACPI: Added _OSI(Linux-Dell-Video)
225[ 0.362723] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
226[ 0.362724] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
227[ 0.373513] ACPI: 2 ACPI AML tables successfully acquired and loaded
228[ 0.519418] ACPI: Interpreter enabled
229[ 0.519441] ACPI: (supports S0 S3 S4 S5)
230[ 0.519442] ACPI: Using IOAPIC for interrupt routing
231[ 0.519470] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
232[ 0.520975] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
233[ 0.520988] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
234[ 0.521361] ACPI: Enabled 7 GPEs in block 00 to 1F
235[ 0.528620] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
236[ 0.528625] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
237[ 0.528954] PCI host bridge to bus 0000:00
238[ 0.528956] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
239[ 0.528957] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
240[ 0.528958] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
241[ 0.528959] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
242[ 0.528960] pci_bus 0000:00: root bus resource [mem 0xc7f00000-0xdfffffff window]
243[ 0.528961] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
244[ 0.528963] pci_bus 0000:00: root bus resource [bus 00-ff]
245[ 0.528973] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
246[ 0.529081] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
247[ 0.529099] pci 0000:00:02.0: enabling Extended Tags
248[ 0.529122] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
249[ 0.529205] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
250[ 0.529224] pci 0000:00:04.0: enabling Extended Tags
251[ 0.529246] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
252[ 0.529342] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
253[ 0.529362] pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
254[ 0.529371] pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
255[ 0.529380] pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
256[ 0.529388] pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
257[ 0.529397] pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
258[ 0.529405] pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
259[ 0.529426] pci 0000:00:11.0: set SATA to AHCI mode
260[ 0.529530] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
261[ 0.529547] pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
262[ 0.529676] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
263[ 0.529692] pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
264[ 0.529822] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
265[ 0.529842] pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
266[ 0.529920] pci 0000:00:12.2: supports D1 D2
267[ 0.529921] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
268[ 0.530012] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
269[ 0.530029] pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
270[ 0.530156] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
271[ 0.530173] pci 0000:00:13.1: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
272[ 0.530301] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
273[ 0.530322] pci 0000:00:13.2: reg 0x10: [mem 0xfe9ff400-0xfe9ff4ff]
274[ 0.530399] pci 0000:00:13.2: supports D1 D2
275[ 0.530400] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
276[ 0.530491] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
277[ 0.530651] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
278[ 0.530669] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
279[ 0.530678] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
280[ 0.530686] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
281[ 0.530694] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
282[ 0.530703] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
283[ 0.530722] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
284[ 0.530723] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
285[ 0.530724] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
286[ 0.530724] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
287[ 0.530820] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
288[ 0.530844] pci 0000:00:14.2: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
289[ 0.530909] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
290[ 0.530987] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
291[ 0.531125] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
292[ 0.531243] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
293[ 0.531260] pci 0000:00:14.5: reg 0x10: [mem 0xfe9fa000-0xfe9fafff]
294[ 0.531387] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
295[ 0.531458] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
296[ 0.531527] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
297[ 0.531595] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
298[ 0.531666] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
299[ 0.531733] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
300[ 0.531841] pci 0000:01:00.0: [1002:67ff] type 00 class 0x030000
301[ 0.531866] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
302[ 0.531875] pci 0000:01:00.0: reg 0x18: [mem 0xcfe00000-0xcfffffff 64bit pref]
303[ 0.531882] pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
304[ 0.531888] pci 0000:01:00.0: reg 0x24: [mem 0xfeac0000-0xfeafffff]
305[ 0.531895] pci 0000:01:00.0: reg 0x30: [mem 0xfeaa0000-0xfeabffff pref]
306[ 0.531900] pci 0000:01:00.0: enabling Extended Tags
307[ 0.531963] pci 0000:01:00.0: supports D1 D2
308[ 0.531964] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
309[ 0.531998] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:02.0 (capable of 63.008 Gb/s with 8 GT/s x8 link)
310[ 0.532046] pci 0000:01:00.1: [1002:aae0] type 00 class 0x040300
311[ 0.532066] pci 0000:01:00.1: reg 0x10: [mem 0xfea9c000-0xfea9ffff 64bit]
312[ 0.532098] pci 0000:01:00.1: enabling Extended Tags
313[ 0.532143] pci 0000:01:00.1: supports D1 D2
314[ 0.532222] pci 0000:00:02.0: PCI bridge to [bus 01]
315[ 0.532225] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
316[ 0.532227] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
317[ 0.532229] pci 0000:00:02.0: bridge window [mem 0xcfe00000-0xdfffffff 64bit pref]
318[ 0.532288] pci 0000:02:00.0: [1969:10a1] type 00 class 0x020000
319[ 0.532317] pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
320[ 0.532327] pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f]
321[ 0.532430] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.532524] pci 0000:00:04.0: PCI bridge to [bus 02]
323[ 0.532527] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
324[ 0.532529] pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
325[ 0.532540] pci_bus 0000:03: extended config space not accessible
326[ 0.532599] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
327[ 0.532607] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
328[ 0.532608] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
329[ 0.532609] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
330[ 0.532610] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
331[ 0.532611] pci 0000:00:14.4: bridge window [mem 0xc7f00000-0xdfffffff window] (subtractive decode)
332[ 0.532612] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
333[ 0.533354] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 12 14 15)
334[ 0.533409] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
335[ 0.533464] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
336[ 0.533519] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
337[ 0.533573] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
338[ 0.533627] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
339[ 0.533680] ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
340[ 0.533733] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
341[ 0.534791] SCSI subsystem initialized
342[ 0.534809] libata version 3.00 loaded.
343[ 0.534809] pci 0000:01:00.0: vgaarb: setting as boot VGA device
344[ 0.534809] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
345[ 0.534809] pci 0000:01:00.0: vgaarb: bridge control possible
346[ 0.534809] vgaarb: loaded
347[ 0.534809] ACPI: bus type USB registered
348[ 0.534809] usbcore: registered new interface driver usbfs
349[ 0.534809] usbcore: registered new interface driver hub
350[ 0.534809] usbcore: registered new device driver usb
351[ 0.534809] pps_core: LinuxPPS API ver. 1 registered
352[ 0.534809] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
353[ 0.534809] PTP clock support registered
354[ 0.534809] EDAC MC: Ver: 3.0.0
355[ 0.534809] PCI: Using ACPI for IRQ routing
356[ 0.543073] PCI: pci_cache_line_size set to 64 bytes
357[ 0.543119] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
358[ 0.543120] e820: reserve RAM buffer [mem 0xc7e80000-0xc7ffffff]
359[ 0.543121] e820: reserve RAM buffer [mem 0x437000000-0x437ffffff]
360[ 0.543213] NetLabel: Initializing
361[ 0.543214] NetLabel: domain hash size = 128
362[ 0.543214] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
363[ 0.543227] NetLabel: unlabeled traffic allowed by default
364[ 0.543240] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
365[ 0.543240] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
366[ 0.544731] clocksource: Switched to clocksource tsc-early
367[ 0.556692] VFS: Disk quotas dquot_6.6.0
368[ 0.556706] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
369[ 0.556727] *** VALIDATE hugetlbfs ***
370[ 0.556822] AppArmor: AppArmor Filesystem Enabled
371[ 0.556842] pnp: PnP ACPI init
372[ 0.557031] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
373[ 0.557089] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
374[ 0.557659] pnp 00:02: [dma 0 disabled]
375[ 0.557723] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
376[ 0.557851] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
377[ 0.557852] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
378[ 0.557856] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
379[ 0.558142] system 00:04: [io 0x04d0-0x04d1] has been reserved
380[ 0.558143] system 00:04: [io 0x040b] has been reserved
381[ 0.558145] system 00:04: [io 0x04d6] has been reserved
382[ 0.558146] system 00:04: [io 0x0c00-0x0c01] has been reserved
383[ 0.558147] system 00:04: [io 0x0c14] has been reserved
384[ 0.558148] system 00:04: [io 0x0c50-0x0c51] has been reserved
385[ 0.558149] system 00:04: [io 0x0c52] has been reserved
386[ 0.558150] system 00:04: [io 0x0c6c] has been reserved
387[ 0.558151] system 00:04: [io 0x0c6f] has been reserved
388[ 0.558152] system 00:04: [io 0x0cd0-0x0cd1] has been reserved
389[ 0.558153] system 00:04: [io 0x0cd2-0x0cd3] has been reserved
390[ 0.558154] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
391[ 0.558155] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
392[ 0.558156] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
393[ 0.558157] system 00:04: [io 0x0b00-0x0b3f] has been reserved
394[ 0.558158] system 00:04: [io 0x0800-0x089f] has been reserved
395[ 0.558159] system 00:04: [io 0x0b00-0x0b0f] has been reserved
396[ 0.558160] system 00:04: [io 0x0b20-0x0b3f] has been reserved
397[ 0.558161] system 00:04: [io 0x0900-0x090f] has been reserved
398[ 0.558162] system 00:04: [io 0x0910-0x091f] has been reserved
399[ 0.558163] system 00:04: [io 0xfe00-0xfefe] has been reserved
400[ 0.558165] system 00:04: [mem 0xc7f00000-0xc7ffffff] has been reserved
401[ 0.558166] system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
402[ 0.558168] system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved
403[ 0.558169] system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
404[ 0.558172] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
405[ 0.558414] system 00:05: [io 0x0230-0x023f] has been reserved
406[ 0.558416] system 00:05: [io 0x0290-0x029f] has been reserved
407[ 0.558417] system 00:05: [io 0x0300-0x030f] has been reserved
408[ 0.558418] system 00:05: [io 0x0a30-0x0a3f] has been reserved
409[ 0.558421] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
410[ 0.558485] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
411[ 0.558488] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
412[ 0.558834] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
413[ 0.558835] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
414[ 0.558837] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
415[ 0.558838] system 00:07: [mem 0x00100000-0xc7efffff] could not be reserved
416[ 0.558839] system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
417[ 0.558843] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
418[ 0.558961] pnp: PnP ACPI: found 8 devices
419[ 0.560543] thermal_sys: Registered thermal governor 'fair_share'
420[ 0.560543] thermal_sys: Registered thermal governor 'bang_bang'
421[ 0.560544] thermal_sys: Registered thermal governor 'step_wise'
422[ 0.560545] thermal_sys: Registered thermal governor 'user_space'
423[ 0.560545] thermal_sys: Registered thermal governor 'power_allocator'
424[ 0.565045] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
425[ 0.565080] pci 0000:00:02.0: PCI bridge to [bus 01]
426[ 0.565082] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
427[ 0.565084] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
428[ 0.565086] pci 0000:00:02.0: bridge window [mem 0xcfe00000-0xdfffffff 64bit pref]
429[ 0.565088] pci 0000:00:04.0: PCI bridge to [bus 02]
430[ 0.565089] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
431[ 0.565091] pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
432[ 0.565095] pci 0000:00:14.4: PCI bridge to [bus 03]
433[ 0.565106] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
434[ 0.565107] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
435[ 0.565108] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
436[ 0.565109] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
437[ 0.565110] pci_bus 0000:00: resource 8 [mem 0xc7f00000-0xdfffffff window]
438[ 0.565111] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
439[ 0.565112] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
440[ 0.565113] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
441[ 0.565114] pci_bus 0000:01: resource 2 [mem 0xcfe00000-0xdfffffff 64bit pref]
442[ 0.565115] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
443[ 0.565116] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
444[ 0.565117] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
445[ 0.565118] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
446[ 0.565119] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
447[ 0.565119] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
448[ 0.565120] pci_bus 0000:03: resource 8 [mem 0xc7f00000-0xdfffffff window]
449[ 0.565121] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
450[ 0.565185] NET: Registered protocol family 2
451[ 0.565347] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
452[ 0.565545] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
453[ 0.565824] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
454[ 0.565884] TCP: Hash tables configured (established 131072 bind 65536)
455[ 0.565984] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
456[ 0.566052] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
457[ 0.566161] NET: Registered protocol family 1
458[ 0.566165] NET: Registered protocol family 44
459[ 0.607971] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6a0 took 40809 usecs
460[ 0.635964] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x6a0 took 27330 usecs
461[ 0.663962] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6a0 took 27161 usecs
462[ 0.691961] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x6a0 took 27337 usecs
463[ 0.719959] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6a0 took 27152 usecs
464[ 0.719979] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
465[ 0.719987] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
466[ 0.719992] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
467[ 0.719995] PCI: CLS 64 bytes, default 64
468[ 0.720075] Trying to unpack rootfs image as initramfs...
469[ 1.185294] Freeing initrd memory: 40408K
470[ 1.185808] PCI-DMA: Disabling AGP.
471[ 1.185866] PCI-DMA: aperture base @ bc000000 size 65536 KB
472[ 1.185866] PCI-DMA: using GART IOMMU.
473[ 1.185868] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
474[ 1.188317] amd_uncore: AMD NB counters detected
475[ 1.188463] LVT offset 0 assigned for vector 0x400
476[ 1.188523] perf: AMD IBS detected (0x000000ff)
477[ 1.188571] check: Scanning for low memory corruption every 60 seconds
478[ 1.189855] Initialise system trusted keyrings
479[ 1.189864] Key type blacklist registered
480[ 1.189909] workingset: timestamp_bits=36 max_order=22 bucket_order=0
481[ 1.191332] zbud: loaded
482[ 1.191683] squashfs: version 4.0 (2009/01/31) Phillip Lougher
483[ 1.191893] fuse: init (API version 7.31)
484[ 1.191999] Platform Keyring initialized
485[ 1.195879] Key type asymmetric registered
486[ 1.195880] Asymmetric key parser 'x509' registered
487[ 1.195889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
488[ 1.195942] io scheduler mq-deadline registered
489[ 1.196483] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
490[ 1.196535] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
491[ 1.196535] vesafb: scrolling: redraw
492[ 1.196537] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
493[ 1.196548] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 8128k, total 8128k
494[ 1.196590] fbcon: Deferring console take-over
495[ 1.196591] fb0: VESA VGA frame buffer device
496[ 1.196669] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
497[ 1.196677] ACPI: Power Button [PWRB]
498[ 1.196709] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
499[ 1.196719] ACPI: Power Button [PWRF]
500[ 1.197568] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
501[ 1.218085] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
502[ 1.219801] Linux agpgart interface v0.103
503[ 1.222203] loop: module loaded
504[ 1.222457] libphy: Fixed MDIO Bus: probed
505[ 1.222458] tun: Universal TUN/TAP device driver, 1.6
506[ 1.222484] PPP generic driver version 2.4.2
507[ 1.222518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
508[ 1.222521] ehci-pci: EHCI PCI platform driver
509[ 1.222671] ehci-pci 0000:00:12.2: EHCI Host Controller
510[ 1.222677] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
511[ 1.222685] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
512[ 1.222694] ehci-pci 0000:00:12.2: debug port 1
513[ 1.222734] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff800
514[ 1.235064] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
515[ 1.235126] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
516[ 1.235127] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
517[ 1.235128] usb usb1: Product: EHCI Host Controller
518[ 1.235129] usb usb1: Manufacturer: Linux 5.3.0-28-generic ehci_hcd
519[ 1.235130] usb usb1: SerialNumber: 0000:00:12.2
520[ 1.235232] hub 1-0:1.0: USB hub found
521[ 1.235239] hub 1-0:1.0: 6 ports detected
522[ 1.235548] ehci-pci 0000:00:13.2: EHCI Host Controller
523[ 1.235552] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
524[ 1.235554] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
525[ 1.235563] ehci-pci 0000:00:13.2: debug port 1
526[ 1.235595] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe9ff400
527[ 1.250714] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
528[ 1.250834] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
529[ 1.250837] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
530[ 1.250840] usb usb2: Product: EHCI Host Controller
531[ 1.250843] usb usb2: Manufacturer: Linux 5.3.0-28-generic ehci_hcd
532[ 1.250845] usb usb2: SerialNumber: 0000:00:13.2
533[ 1.250967] hub 2-0:1.0: USB hub found
534[ 1.250973] hub 2-0:1.0: 6 ports detected
535[ 1.251123] ehci-platform: EHCI generic platform driver
536[ 1.251132] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
537[ 1.251136] ohci-pci: OHCI PCI platform driver
538[ 1.251255] ohci-pci 0000:00:12.0: OHCI PCI host controller
539[ 1.251259] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
540[ 1.251280] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe9fe000
541[ 1.314740] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
542[ 1.314741] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
543[ 1.314742] usb usb3: Product: OHCI PCI host controller
544[ 1.314743] usb usb3: Manufacturer: Linux 5.3.0-28-generic ohci_hcd
545[ 1.314744] usb usb3: SerialNumber: 0000:00:12.0
546[ 1.314886] hub 3-0:1.0: USB hub found
547[ 1.314894] hub 3-0:1.0: 3 ports detected
548[ 1.315184] ohci-pci 0000:00:12.1: OHCI PCI host controller
549[ 1.315190] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
550[ 1.315207] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe9fd000
551[ 1.378739] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
552[ 1.378741] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
553[ 1.378742] usb usb4: Product: OHCI PCI host controller
554[ 1.378742] usb usb4: Manufacturer: Linux 5.3.0-28-generic ohci_hcd
555[ 1.378743] usb usb4: SerialNumber: 0000:00:12.1
556[ 1.378886] hub 4-0:1.0: USB hub found
557[ 1.378894] hub 4-0:1.0: 3 ports detected
558[ 1.379182] ohci-pci 0000:00:13.0: OHCI PCI host controller
559[ 1.379186] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
560[ 1.379207] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fc000
561[ 1.442738] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
562[ 1.442740] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
563[ 1.442741] usb usb5: Product: OHCI PCI host controller
564[ 1.442742] usb usb5: Manufacturer: Linux 5.3.0-28-generic ohci_hcd
565[ 1.442743] usb usb5: SerialNumber: 0000:00:13.0
566[ 1.442886] hub 5-0:1.0: USB hub found
567[ 1.442894] hub 5-0:1.0: 3 ports detected
568[ 1.443181] ohci-pci 0000:00:13.1: OHCI PCI host controller
569[ 1.443187] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
570[ 1.443209] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe9fb000
571[ 1.506739] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
572[ 1.506740] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
573[ 1.506741] usb usb6: Product: OHCI PCI host controller
574[ 1.506742] usb usb6: Manufacturer: Linux 5.3.0-28-generic ohci_hcd
575[ 1.506743] usb usb6: SerialNumber: 0000:00:13.1
576[ 1.506886] hub 6-0:1.0: USB hub found
577[ 1.506894] hub 6-0:1.0: 3 ports detected
578[ 1.507189] ohci-pci 0000:00:14.5: OHCI PCI host controller
579[ 1.507193] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
580[ 1.507209] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe9fa000
581[ 1.570736] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
582[ 1.570738] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
583[ 1.570739] usb usb7: Product: OHCI PCI host controller
584[ 1.570740] usb usb7: Manufacturer: Linux 5.3.0-28-generic ohci_hcd
585[ 1.570741] usb usb7: SerialNumber: 0000:00:14.5
586[ 1.570882] hub 7-0:1.0: USB hub found
587[ 1.570890] hub 7-0:1.0: 2 ports detected
588[ 1.571062] ohci-platform: OHCI generic platform driver
589[ 1.571070] uhci_hcd: USB Universal Host Controller Interface driver
590[ 1.571116] i8042: PNP: No PS/2 controller found.
591[ 1.571116] i8042: Probing ports directly.
592[ 1.571483] serio: i8042 KBD port at 0x60,0x64 irq 1
593[ 1.571488] serio: i8042 AUX port at 0x60,0x64 irq 12
594[ 1.571608] mousedev: PS/2 mouse device common for all mice
595[ 1.571720] rtc_cmos 00:01: RTC can wake from S4
596[ 1.571850] rtc_cmos 00:01: registered as rtc0
597[ 1.571863] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
598[ 1.571872] i2c /dev entries driver
599[ 1.571912] device-mapper: uevent: version 1.0.3
600[ 1.571986] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
601[ 1.572008] platform eisa.0: Probing EISA bus 0
602[ 1.572010] platform eisa.0: EISA: Cannot allocate resource for mainboard
603[ 1.572011] platform eisa.0: Cannot allocate resource for EISA slot 1
604[ 1.572012] platform eisa.0: Cannot allocate resource for EISA slot 2
605[ 1.572013] platform eisa.0: Cannot allocate resource for EISA slot 3
606[ 1.572014] platform eisa.0: Cannot allocate resource for EISA slot 4
607[ 1.572015] platform eisa.0: Cannot allocate resource for EISA slot 5
608[ 1.572016] platform eisa.0: Cannot allocate resource for EISA slot 6
609[ 1.572016] platform eisa.0: Cannot allocate resource for EISA slot 7
610[ 1.572017] platform eisa.0: Cannot allocate resource for EISA slot 8
611[ 1.572018] platform eisa.0: EISA: Detected 0 cards
612[ 1.572110] ledtrig-cpu: registered to indicate activity on CPUs
613[ 1.572138] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
614[ 1.572306] NET: Registered protocol family 10
615[ 1.577196] Segment Routing with IPv6
616[ 1.577218] NET: Registered protocol family 17
617[ 1.577266] Key type dns_resolver registered
618[ 1.577731] RAS: Correctable Errors collector initialized.
619[ 1.577735] microcode: microcode updated early to new patch_level=0x06000852
620[ 1.577754] microcode: CPU0: patch_level=0x06000852
621[ 1.577759] microcode: CPU1: patch_level=0x06000852
622[ 1.577769] microcode: CPU2: patch_level=0x06000852
623[ 1.577775] microcode: CPU3: patch_level=0x06000852
624[ 1.577782] microcode: CPU4: patch_level=0x06000852
625[ 1.577788] microcode: CPU5: patch_level=0x06000852
626[ 1.577795] microcode: CPU6: patch_level=0x06000852
627[ 1.577801] microcode: CPU7: patch_level=0x06000852
628[ 1.577829] microcode: Microcode Update Driver: v2.2.
629[ 1.577836] sched_clock: Marking stable (1577612950, 212308)->(1597163074, -19337816)
630[ 1.577985] registered taskstats version 1
631[ 1.577994] Loading compiled-in X.509 certificates
632[ 1.579409] Loaded X.509 cert 'Build time autogenerated kernel key: c209d4e4513ddb6584e17c46859deb0bc3f91652'
633[ 1.579453] zswap: loaded using pool lzo/zbud
634[ 1.584413] Key type big_key registered
635[ 1.586677] Key type encrypted registered
636[ 1.586682] AppArmor: AppArmor sha1 policy hashing enabled
637[ 1.586696] ima: No TPM chip found, activating TPM-bypass!
638[ 1.586701] ima: Allocated hash algorithm: sha1
639[ 1.586707] No architecture policies found
640[ 1.586714] evm: Initialising EVM extended attributes:
641[ 1.586714] evm: security.selinux
642[ 1.586715] evm: security.SMACK64
643[ 1.586715] evm: security.SMACK64EXEC
644[ 1.586715] evm: security.SMACK64TRANSMUTE
645[ 1.586716] evm: security.SMACK64MMAP
646[ 1.586716] evm: security.apparmor
647[ 1.586716] evm: security.ima
648[ 1.586717] evm: security.capability
649[ 1.586717] evm: HMAC attrs: 0x1
650[ 1.586993] PM: Magic number: 12:252:88
651[ 1.587094] rtc_cmos 00:01: setting system clock to 2020-03-26T17:04:33 UTC (1585242273)
652[ 1.587313] acpi_cpufreq: overriding BIOS provided _PSD data
653[ 1.589792] Freeing unused decrypted memory: 2040K
654[ 1.590475] Freeing unused kernel image memory: 2660K
655[ 1.630750] Write protecting the kernel read-only data: 22528k
656[ 1.631431] Freeing unused kernel image memory: 2008K
657[ 1.631824] Freeing unused kernel image memory: 1476K
658[ 1.642872] x86/mm: Checked W+X mappings: passed, no W+X pages found.
659[ 1.642874] Run /init as init process
660[ 1.682693] usb 3-3: new low-speed USB device number 2 using ohci-pci
661[ 1.724941] scsi host0: pata_atiixp
662[ 1.725128] scsi host1: pata_atiixp
663[ 1.725169] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
664[ 1.725170] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
665[ 1.725376] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [18:31:bf:6d:4e:18]
666[ 1.725386] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20190703/utaddress-213)
667[ 1.725392] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20190703/utaddress-213)
668[ 1.725396] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20190703/utaddress-213)
669[ 1.725401] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
670[ 1.725406] ahci 0000:00:11.0: version 3.0
671[ 1.725612] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
672[ 1.725614] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
673[ 1.726094] scsi host2: ahci
674[ 1.726702] scsi host3: ahci
675[ 1.726903] scsi host4: ahci
676[ 1.727017] scsi host5: ahci
677[ 1.727075] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 22
678[ 1.727077] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 22
679[ 1.727078] ata5: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 22
680[ 1.727080] ata6: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 22
681[ 1.729842] alx 0000:02:00.0 enp2s0: renamed from eth0
682[ 1.893904] usb 3-3: New USB device found, idVendor=046d, idProduct=c317, bcdDevice= 0.70
683[ 1.893906] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
684[ 1.893907] usb 3-3: Product: USB Multimedia Keyboard
685[ 1.893908] usb 3-3: Manufacturer: Logitech
686[ 1.919371] hidraw: raw HID events driver (C) Jiri Kosina
687[ 1.933119] usbcore: registered new interface driver usbhid
688[ 1.933120] usbhid: USB HID core driver
689[ 1.934986] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:046D:C317.0001/input/input5
690[ 1.994978] hid-generic 0003:046D:C317.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Multimedia Keyboard] on usb-0000:00:12.0-3/input0
691[ 1.995138] input: Logitech USB Multimedia Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:046D:C317.0002/input/input6
692[ 2.042061] ata5: SATA link down (SStatus 0 SControl 300)
693[ 2.042170] ata6: SATA link down (SStatus 0 SControl 300)
694[ 2.054963] input: Logitech USB Multimedia Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:046D:C317.0002/input/input7
695[ 2.055025] hid-generic 0003:046D:C317.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Multimedia Keyboard] on usb-0000:00:12.0-3/input1
696[ 2.170709] tsc: Refined TSC clocksource calibration: 4018.039 MHz
697[ 2.170733] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39eaecd52c7, max_idle_ns: 440795232047 ns
698[ 2.170809] clocksource: Switched to clocksource tsc
699[ 2.202726] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
700[ 2.202755] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
701[ 2.205451] ata4.00: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN00, max UDMA/133
702[ 2.211114] ata4.00: configured for UDMA/133
703[ 2.214959] ata3.00: ATA-8: SSD2SC120GN1DA16T-T, 504ABBF0, max UDMA/133
704[ 2.214963] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
705[ 2.224735] ata3.00: configured for UDMA/133
706[ 2.225011] scsi 2:0:0:0: Direct-Access ATA SSD2SC120GN1DA16 BBF0 PQ: 0 ANSI: 5
707[ 2.225341] sd 2:0:0:0: Attached scsi generic sg0 type 0
708[ 2.225497] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
709[ 2.225515] sd 2:0:0:0: [sda] Write Protect is off
710[ 2.225517] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
711[ 2.225553] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
712[ 2.226072] sda: sda1
713[ 2.226451] sd 2:0:0:0: [sda] Attached SCSI disk
714[ 2.228245] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS95 RN00 PQ: 0 ANSI: 5
715[ 2.307609] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
716[ 2.307613] cdrom: Uniform CD-ROM driver Revision: 3.20
717[ 2.307986] sr 3:0:0:0: Attached scsi CD-ROM sr0
718[ 2.308052] sr 3:0:0:0: Attached scsi generic sg1 type 5
719[ 2.602706] usb 4-1: new full-speed USB device number 2 using ohci-pci
720[ 2.803789] usb 4-1: New USB device found, idVendor=3938, idProduct=1110, bcdDevice= 2.15
721[ 2.803793] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
722[ 2.803796] usb 4-1: Product: AmazonBasics gaming mouse
723[ 2.803799] usb 4-1: Manufacturer: Acrox
724[ 2.810161] input: Acrox AmazonBasics gaming mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:3938:1110.0003/input/input8
725[ 2.810260] hid-generic 0003:3938:1110.0003: input,hidraw2: USB HID v1.11 Mouse [Acrox AmazonBasics gaming mouse] on usb-0000:00:12.1-1/input0
726[ 2.814366] input: Acrox AmazonBasics gaming mouse Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:3938:1110.0004/input/input9
727[ 2.870937] input: Acrox AmazonBasics gaming mouse Consumer Control as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:3938:1110.0004/input/input10
728[ 2.870996] input: Acrox AmazonBasics gaming mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:3938:1110.0004/input/input11
729[ 2.871093] hid-generic 0003:3938:1110.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Acrox AmazonBasics gaming mouse] on usb-0000:00:12.1-1/input1
730[ 3.410547] fbcon: Taking over console
731[ 3.410660] Console: switching to colour frame buffer device 240x67
732[ 3.414534] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
733[ 3.469718] random: fast init done
734[ 3.544392] random: systemd: uninitialized urandom read (16 bytes read)
735[ 3.546524] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
736[ 3.563149] systemd[1]: Detected architecture x86-64.
737[ 3.563187] random: systemd: uninitialized urandom read (16 bytes read)
738[ 3.563194] random: systemd: uninitialized urandom read (16 bytes read)
739[ 3.564521] systemd[1]: Set hostname to <michael-System-Product-Name>.
740[ 3.653208] systemd[1]: Created slice User and Session Slice.
741[ 3.653237] systemd[1]: Reached target User and Group Name Lookups.
742[ 3.653274] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
743[ 3.653388] systemd[1]: Created slice System Slice.
744[ 3.653431] systemd[1]: Listening on udev Kernel Socket.
745[ 3.653494] systemd[1]: Listening on Journal Socket.
746[ 3.654090] systemd[1]: Started Read required files in advance.
747[ 3.663403] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
748[ 3.679354] lp: driver loaded but no devices found
749[ 3.681875] ppdev: user-space parallel port driver
750[ 3.742532] systemd-journald[366]: Received request to flush runtime journal from PID 1
751[ 3.774651] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
752[ 3.921739] ATK0110 ATK0110:00: Overriding interface detection
753[ 4.049330] cryptd: max_cpu_qlen set to 1000
754[ 4.050553] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
755[ 4.050555] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
756[ 4.080385] audit: type=1400 audit(1585242275.987:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=537 comm="apparmor_parser"
757[ 4.080389] audit: type=1400 audit(1585242275.987:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=540 comm="apparmor_parser"
758[ 4.082976] audit: type=1400 audit(1585242275.991:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=536 comm="apparmor_parser"
759[ 4.083199] audit: type=1400 audit(1585242275.991:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=535 comm="apparmor_parser"
760[ 4.083203] audit: type=1400 audit(1585242275.991:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=535 comm="apparmor_parser"
761[ 4.083206] audit: type=1400 audit(1585242275.991:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=535 comm="apparmor_parser"
762[ 4.087649] audit: type=1400 audit(1585242275.995:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=541 comm="apparmor_parser"
763[ 4.087654] audit: type=1400 audit(1585242275.995:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=541 comm="apparmor_parser"
764[ 4.101868] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
765[ 4.101926] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
766[ 4.101982] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
767[ 4.102027] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
768[ 4.102072] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
769[ 4.123322] audit: type=1400 audit(1585242276.031:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=550 comm="apparmor_parser"
770[ 4.123854] AVX version of gcm_enc/dec engaged.
771[ 4.123854] AES CTR mode by8 optimization enabled
772[ 4.160540] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
773[ 4.160543] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
774[ 4.160545] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
775[ 4.160546] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
776[ 4.160547] snd_hda_codec_realtek hdaudioC0D0: inputs:
777[ 4.160549] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
778[ 4.160550] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
779[ 4.160552] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
780[ 4.175420] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
781[ 4.175621] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
782[ 4.175732] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
783[ 4.175791] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
784[ 4.175859] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
785[ 4.178965] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
786[ 4.178966] AMD-Vi: AMD IOMMUv2 functionality not available on this system
787[ 4.288944] [drm] amdgpu kernel modesetting enabled.
788[ 4.289026] CRAT table not found
789[ 4.289030] Virtual CRAT table created for CPU
790[ 4.289031] Parsing CRAT table with 1 nodes
791[ 4.289032] Creating topology SYSFS entries
792[ 4.289043] Topology: Add CPU node
793[ 4.289044] Finished initializing topology
794[ 4.289135] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff
795[ 4.289138] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xcfe00000 -> 0xcfffffff
796[ 4.289139] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfeac0000 -> 0xfeafffff
797[ 4.289140] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
798[ 4.289141] fb0: switching to amdgpudrmfb from VESA VGA
799[ 4.289224] Console: switching to colour dummy device 80x25
800[ 4.289241] amdgpu 0000:01:00.0: vgaarb: deactivate vga console
801[ 4.289483] [drm] initializing kernel modesetting (POLARIS11 0x1002:0x67FF 0x1043:0x0551 0xFF).
802[ 4.289496] [drm] register mmio base: 0xFEAC0000
803[ 4.289497] [drm] register mmio size: 262144
804[ 4.289499] [drm] PCIE atomic ops is not supported
805[ 4.289503] [drm] add ip block number 0 <vi_common>
806[ 4.289504] [drm] add ip block number 1 <gmc_v8_0>
807[ 4.289505] [drm] add ip block number 2 <tonga_ih>
808[ 4.289506] [drm] add ip block number 3 <gfx_v8_0>
809[ 4.289507] [drm] add ip block number 4 <sdma_v3_0>
810[ 4.289508] [drm] add ip block number 5 <powerplay>
811[ 4.289509] [drm] add ip block number 6 <dm>
812[ 4.289509] [drm] add ip block number 7 <uvd_v6_0>
813[ 4.289510] [drm] add ip block number 8 <vce_v3_0>
814[ 4.289514] kfd kfd: skipped device 1002:67ff, PCI rejects atomics
815[ 4.289760] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
816[ 4.289765] caller pci_map_rom+0x71/0x1d0 mapping multiple BARs
817[ 4.289766] amdgpu 0000:01:00.0: No more image in the PCI ROM
818[ 4.291017] ATOM BIOS: 115-C994PI0-102
819[ 4.291034] [drm] UVD is enabled in VM mode
820[ 4.291034] [drm] UVD ENC is enabled in VM mode
821[ 4.291038] [drm] VCE enabled in VM mode
822[ 4.291067] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
823[ 4.506841] amdgpu 0000:01:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
824[ 4.506843] amdgpu 0000:01:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
825[ 4.506853] [drm] Detected VRAM RAM=4096M, BAR=256M
826[ 4.506854] [drm] RAM width 128bits GDDR5
827[ 4.507066] [TTM] Zone kernel: Available graphics memory: 8189906 KiB
828[ 4.507067] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
829[ 4.507067] [TTM] Initializing pool allocator
830[ 4.507072] [TTM] Initializing DMA pool allocator
831[ 4.507113] [drm] amdgpu: 4096M of VRAM memory ready
832[ 4.507116] [drm] amdgpu: 4096M of GTT memory ready.
833[ 4.507131] [drm] GART: num cpu pages 65536, num gpu pages 65536
834[ 4.507641] [drm] PCIE GART of 256M enabled (table at 0x000000F4007E9000).
835[ 4.557120] [drm] Chained IB support enabled!
836[ 4.562780] kvm: disabled by bios
837[ 4.582864] amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
838[ 4.586788] [drm] Found UVD firmware Version: 1.130 Family ID: 16
839[ 4.603128] [drm] Found VCE firmware Version: 52.4 Binary ID: 3
840[ 4.619359] kvm: disabled by bios
841[ 4.626203] MCE: In-kernel MCE decoding enabled.
842[ 4.631719] EDAC amd64: Node 0: DRAM ECC disabled.
843[ 4.631720] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
844 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
845 (Note that use of the override may cause unknown side effects.)
846[ 4.692953] [drm] DM_PPLIB: values for Engine clock
847[ 4.692954] [drm] DM_PPLIB: 214000
848[ 4.692955] [drm] DM_PPLIB: 335000
849[ 4.692955] [drm] DM_PPLIB: 503000
850[ 4.692956] [drm] DM_PPLIB: 697000
851[ 4.692956] [drm] DM_PPLIB: 874000
852[ 4.692956] [drm] DM_PPLIB: 1019000
853[ 4.692957] [drm] DM_PPLIB: 1043000
854[ 4.692957] [drm] DM_PPLIB: 1071000
855[ 4.692958] [drm] DM_PPLIB: Validation clocks:
856[ 4.692958] [drm] DM_PPLIB: engine_max_clock: 107100
857[ 4.692959] [drm] DM_PPLIB: memory_max_clock: 175000
858[ 4.692959] [drm] DM_PPLIB: level : 8
859[ 4.692960] [drm] DM_PPLIB: values for Memory clock
860[ 4.692961] [drm] DM_PPLIB: 300000
861[ 4.692961] [drm] DM_PPLIB: 625000
862[ 4.692962] [drm] DM_PPLIB: 1750000
863[ 4.692962] [drm] DM_PPLIB: Validation clocks:
864[ 4.692962] [drm] DM_PPLIB: engine_max_clock: 107100
865[ 4.692963] [drm] DM_PPLIB: memory_max_clock: 175000
866[ 4.692963] [drm] DM_PPLIB: level : 8
867[ 4.722698] [drm] Display Core initialized with v3.2.35!
868[ 4.736140] [drm] SADs count is: -2, don't need to read it
869[ 4.736151] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
870[ 4.736152] [drm] Driver supports precise vblank timestamp query.
871[ 4.782321] [drm] UVD and UVD ENC initialized successfully.
872[ 4.892243] [drm] VCE initialized successfully.
873[ 4.893826] [drm] fb mappable at 0xD0D19000
874[ 4.893827] [drm] vram apper at 0xD0000000
875[ 4.893827] [drm] size 8294400
876[ 4.893828] [drm] fb depth is 24
877[ 4.893828] [drm] pitch is 7680
878[ 4.893905] fbcon: amdgpudrmfb (fb0) is primary device
879[ 4.893957] Console: switching to colour frame buffer device 240x67
880[ 4.893985] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
881[ 4.907479] EDAC amd64: Node 0: DRAM ECC disabled.
882[ 4.907487] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
883 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
884 (Note that use of the override may cause unknown side effects.)
885[ 4.908331] kvm: disabled by bios
886[ 4.909967] [drm] Initialized amdgpu 3.33.0 20150101 for 0000:01:00.0 on minor 0
887[ 4.975361] kvm: disabled by bios
888[ 4.976132] EDAC amd64: Node 0: DRAM ECC disabled.
889[ 4.976133] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
890 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
891 (Note that use of the override may cause unknown side effects.)
892[ 5.059179] EDAC amd64: Node 0: DRAM ECC disabled.
893[ 5.059182] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
894 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
895 (Note that use of the override may cause unknown side effects.)
896[ 5.059521] kvm: disabled by bios
897[ 5.135227] kvm: disabled by bios
898[ 5.136168] EDAC amd64: Node 0: DRAM ECC disabled.
899[ 5.136169] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
900 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
901 (Note that use of the override may cause unknown side effects.)
902[ 5.235273] kvm: disabled by bios
903[ 5.236066] EDAC amd64: Node 0: DRAM ECC disabled.
904[ 5.236067] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
905 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
906 (Note that use of the override may cause unknown side effects.)
907[ 5.310557] alx 0000:02:00.0 enp2s0: NIC Up: 1 Gbps Full
908[ 5.310876] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
909[ 5.323827] EDAC amd64: Node 0: DRAM ECC disabled.
910[ 5.323828] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
911 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
912 (Note that use of the override may cause unknown side effects.)
913[ 5.324411] kvm: disabled by bios
914[ 5.404042] EDAC amd64: Node 0: DRAM ECC disabled.
915[ 5.404043] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
916 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
917 (Note that use of the override may cause unknown side effects.)
918[ 8.831903] rfkill: input handler disabled
919[ 17.513034] kauditd_printk_skb: 28 callbacks suppressed
920[ 17.513037] audit: type=1400 audit(1585242289.419:39): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/8689/usr/lib/snapd/snap-confine" pid=2210 comm="apparmor_parser"
921[ 17.513206] audit: type=1400 audit(1585242289.419:40): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/8689/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2210 comm="apparmor_parser"
922[ 17.612081] audit: type=1400 audit(1585242289.519:41): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=2214 comm="apparmor_parser"
923[ 17.617425] audit: type=1400 audit(1585242289.523:42): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=2220 comm="apparmor_parser"
924[ 18.140275] audit: type=1400 audit(1585242290.047:43): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=2222 comm="apparmor_parser"
925[ 18.151273] audit: type=1400 audit(1585242290.059:44): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=2231 comm="apparmor_parser"
926[ 18.464875] audit: type=1400 audit(1585242290.371:45): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=2234 comm="apparmor_parser"
927[ 18.474482] audit: type=1400 audit(1585242290.379:46): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=2237 comm="apparmor_parser"
928[ 18.768410] audit: type=1400 audit(1585242290.675:47): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=2239 comm="apparmor_parser"
929[ 18.783073] audit: type=1400 audit(1585242290.691:48): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=2242 comm="apparmor_parser"
930[ 22.687133] kauditd_printk_skb: 6 callbacks suppressed
931[ 22.687135] audit: type=1400 audit(1585242294.595:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=2336 comm="apparmor_parser"
932[ 22.847131] audit: type=1400 audit(1585242294.755:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=2331 comm="apparmor_parser"
933[ 22.866813] audit: type=1400 audit(1585242294.775:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=2338 comm="apparmor_parser"
934[ 22.883872] audit: type=1400 audit(1585242294.791:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=2330 comm="apparmor_parser"
935[ 22.952902] audit: type=1400 audit(1585242294.859:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-characters" pid=2337 comm="apparmor_parser"
936[ 22.954449] audit: type=1400 audit(1585242294.859:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-logs" pid=2329 comm="apparmor_parser"
937[ 22.974232] audit: type=1400 audit(1585242294.879:61): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=2332 comm="apparmor_parser"
938[ 23.039307] audit: type=1400 audit(1585242294.947:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=2335 comm="apparmor_parser"
939[ 28.592101] audit: type=1400 audit(1585242300.499:63): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/8689/usr/lib/snapd/snap-confine" pid=2774 comm="apparmor_parser"
940[ 28.592108] audit: type=1400 audit(1585242300.499:64): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/8689/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2774 comm="apparmor_parser"
941[ 28.940939] audit: type=1400 audit(1585242300.847:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=2777 comm="apparmor_parser"
942[ 29.200959] audit: type=1400 audit(1585242301.107:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=2776 comm="apparmor_parser"
943[ 29.207593] audit: type=1400 audit(1585242301.115:67): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=2806 comm="apparmor_parser"
944[ 29.208618] audit: type=1400 audit(1585242301.115:68): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=2807 comm="apparmor_parser"
945[ 29.307976] audit: type=1400 audit(1585242301.215:69): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/8689/usr/lib/snapd/snap-confine" pid=2811 comm="apparmor_parser"
946[ 29.307982] audit: type=1400 audit(1585242301.215:70): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/8689/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2811 comm="apparmor_parser"
947[ 29.647296] audit: type=1400 audit(1585242301.555:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-logs" pid=2813 comm="apparmor_parser"
948[ 29.749040] audit: type=1400 audit(1585242301.655:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=2814 comm="apparmor_parser"
949[ 30.774742] random: crng init done
950[ 30.774745] random: 7 urandom warning(s) missed due to ratelimiting
951[ 81.146755] usb 4-1: reset full-speed USB device number 2 using ohci-pci
952[ 332.900439] usb 4-1: reset full-speed USB device number 2 using ohci-pci
953[ 336.216463] usb 4-1: reset full-speed USB device number 2 using ohci-pci
954[ 338.324434] usb 4-1: reset full-speed USB device number 2 using ohci-pci
955[ 352.868480] usb 4-1: reset full-speed USB device number 2 using ohci-pci
956[ 360.780496] usb 4-1: reset full-speed USB device number 2 using ohci-pci
957[ 366.768491] usb 4-1: reset full-speed USB device number 2 using ohci-pci
958[ 371.868504] usb 4-1: reset full-speed USB device number 2 using ohci-pci
959[ 382.892528] usb 4-1: reset full-speed USB device number 2 using ohci-pci
960[ 394.228511] usb 4-1: reset full-speed USB device number 2 using ohci-pci
961[ 398.700546] usb 4-1: reset full-speed USB device number 2 using ohci-pci
962[ 433.968604] usb 4-1: reset full-speed USB device number 2 using ohci-pci
963[ 453.532684] SGI XFS with ACLs, security attributes, realtime, no debug enabled
964[ 453.543396] JFS: nTxBlock = 8192, nTxLock = 65536
965[ 453.555383] ntfs: driver 2.1.32 [Flags: R/O MODULE].
966[ 453.575472] QNX4 filesystem 0.2.3 registered.
967[ 453.632584] raid6: sse2x4 gen() 11255 MB/s
968[ 453.680584] raid6: sse2x4 xor() 5926 MB/s
969[ 453.728586] raid6: sse2x2 gen() 9738 MB/s
970[ 453.776584] raid6: sse2x2 xor() 6111 MB/s
971[ 453.824595] raid6: sse2x1 gen() 6706 MB/s
972[ 453.872590] raid6: sse2x1 xor() 4235 MB/s
973[ 453.872593] raid6: using algorithm sse2x4 gen() 11255 MB/s
974[ 453.872593] raid6: .... xor() 5926 MB/s, rmw enabled
975[ 453.872594] raid6: using ssse3x2 recovery algorithm
976[ 453.883972] xor: automatically using best checksumming function avx
977[ 453.915186] Btrfs loaded, crc32c=crc32c-intel
978[ 474.868695] usb 4-1: reset full-speed USB device number 2 using ohci-pci
979[ 476.852686] usb 4-1: reset full-speed USB device number 2 using ohci-pci
980[ 553.848774] usb 4-1: reset full-speed USB device number 2 using ohci-pci
981[ 569.716750] usb 4-1: reset full-speed USB device number 2 using ohci-pci
982[ 572.680750] usb 4-1: reset full-speed USB device number 2 using ohci-pci
983[ 576.780752] usb 4-1: reset full-speed USB device number 2 using ohci-pci
984[ 678.248735] usb 4-1: reset full-speed USB device number 2 using ohci-pci
985[ 801.843703] TCP: enp2s0: Driver has suspect GRO implementation, TCP performance may be compromised.
986[ 852.500887] usb 4-1: reset full-speed USB device number 2 using ohci-pci
987[ 855.804861] usb 4-1: reset full-speed USB device number 2 using ohci-pci
988[ 865.084896] usb 4-1: reset full-speed USB device number 2 using ohci-pci
989[ 927.432989] usb 4-1: reset full-speed USB device number 2 using ohci-pci
990[ 1031.077141] usb 4-1: reset full-speed USB device number 2 using ohci-pci
991[ 1069.618195] kauditd_printk_skb: 22 callbacks suppressed
992[ 1069.618197] audit: type=1400 audit(1585239741.050:95): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.hplip-printer-application" pid=5844 comm="apparmor_parser"
993[ 1069.698894] audit: type=1400 audit(1585239741.130:96): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.hplip-printer-application.run-deviced" pid=5845 comm="apparmor_parser"
994[ 1069.711041] audit: type=1400 audit(1585239741.142:97): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.hplip-printer-application.run-ippeveprinter" pid=5846 comm="apparmor_parser"
995[ 1069.722767] audit: type=1400 audit(1585239741.154:98): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.hplip-printer-application.run-ippprint" pid=5847 comm="apparmor_parser"
996[ 1069.724980] audit: type=1400 audit(1585239741.154:99): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.hplip-printer-application.run-server" pid=5848 comm="apparmor_parser"
997[ 1070.694927] audit: type=1400 audit(1585239742.126:100): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/8689/usr/lib/snapd/snap-confine" pid=5902 comm="apparmor_parser"
998[ 1070.694937] audit: type=1400 audit(1585239742.126:101): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/8689/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=5902 comm="apparmor_parser"
999[ 1070.845231] audit: type=1400 audit(1585239742.278:102): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.hplip-printer-application.run-deviced" pid=5904 comm="apparmor_parser"
1000[ 1070.855661] audit: type=1400 audit(1585239742.286:103): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.hplip-printer-application.run-ippeveprinter" pid=5905 comm="apparmor_parser"
1001[ 1070.872068] audit: type=1400 audit(1585239742.302:104): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.hplip-printer-application.run-ippprint" pid=5906 comm="apparmor_parser"
1002[ 1074.778502] show_signal_msg: 10 callbacks suppressed
1003[ 1074.778507] server[6047]: segfault at 1a0 ip 00007f4a550f3ab0 sp 00007f4a50dddc28 error 4 in libudev.so.1.6.9[7f4a550f0000+1d000]
1004[ 1074.778521] Code: 66 2e 0f 1f 84 00 00 00 00 00 45 85 c9 74 0c 4c 8d 57 01 4c 89 c5 e9 7a ff ff ff 48 8b 41 08 48 01 d8 5b 5d c3 0f 1f 44 00 00 <48> 8b 47 08 48 83 c7 08 ba 00 00 00 00 48 39 f8 48 0f 44 c2 c3 90
1005[ 1074.778528] audit: type=1326 audit(1585239746.210:112): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=6020 comm="server" exe="/snap/hplip-printer-application/3/bin/server" sig=0 arch=c000003e syscall=41 compat=0 ip=0x7f4a54e1aec7 code=0x50000
1006[ 1075.528449] audit: type=1326 audit(1585239746.958:113): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=6050 comm="server" exe="/snap/hplip-printer-application/3/bin/server" sig=0 arch=c000003e syscall=41 compat=0 ip=0x7fcec135aec7 code=0x50000
1007[ 1075.528892] server[6077]: segfault at 1a0 ip 00007fcec1633ab0 sp 00007fcebd31dc28 error 4 in libudev.so.1.6.9[7fcec1630000+1d000]
1008[ 1075.528908] Code: 66 2e 0f 1f 84 00 00 00 00 00 45 85 c9 74 0c 4c 8d 57 01 4c 89 c5 e9 7a ff ff ff 48 8b 41 08 48 01 d8 5b 5d c3 0f 1f 44 00 00 <48> 8b 47 08 48 83 c7 08 ba 00 00 00 00 48 39 f8 48 0f 44 c2 c3 90
1009[ 1085.501246] usb 4-1: reset full-speed USB device number 2 using ohci-pci
1010[ 1093.261281] usb 4-1: reset full-speed USB device number 2 using ohci-pci
1011[ 1118.541350] usb 4-1: reset full-speed USB device number 2 using ohci-pci
1012[ 1126.517487] usb 4-1: reset full-speed USB device number 2 using ohci-pci
1013[ 1170.237515] usb 4-1: reset full-speed USB device number 2 using ohci-pci
1014[ 1177.477621] usb 4-1: reset full-speed USB device number 2 using ohci-pci
1015[ 1210.277752] usb 4-1: reset full-speed USB device number 2 using ohci-pci
1016[ 1245.741761] usb 4-1: reset full-speed USB device number 2 using ohci-pci
1017[ 1253.513857] usb 4-1: reset full-speed USB device number 2 using ohci-pci
1018[ 1261.609863] usb 4-1: reset full-speed USB device number 2 using ohci-pci
1019[ 1263.829890] usb 4-1: reset full-speed USB device number 2 using ohci-pci
1020[ 1314.781944] usb 4-1: reset full-speed USB device number 2 using ohci-pci