· 7 years ago · Oct 23, 2018, 10:10 PM
1[ 0.000000 / 01-01 00:00:00.000][0] Booting Linux on physical CPU 0x100
2[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpu
3[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpuacct
4[ 0.000000 / 01-01 00:00:00.000][0] Linux version 3.18.31-perf-ge966d00 (lgmobile@LGEACI5R13) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Thu Dec 7 15:16:03 KST 2017
5[ 0.000000 / 01-01 00:00:00.000][0] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c0383d
6[ 0.000000 / 01-01 00:00:00.000][0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
7[ 0.000000 / 01-01 00:00:00.000][0] Machine model: Qualcomm Technologies, Inc. MSM8917-PMI8940 MTP
8[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'other_ext_region@0': base 0x85b00000, size 13 MiB
9[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'modem_region@0': base 0x86800000, size 90 MiB
10[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'adsp_fw_region@0': base 0x8c200000, size 17 MiB
11[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'wcnss_fw_region@0': base 0x8d300000, size 7 MiB
12[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'venus_region@0': base 0x8f000000, size 4 MiB
13[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'splash_region@83000000': base 0x90000000, size 20 MiB
14[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'ramoops_region@AFF00000': base 0xaff00000, size 1 MiB
15[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'crash_fb_mem@AFB00000': base 0xafb00000, size 4 MiB
16[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x85b00000, size 13 MiB
17[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node other_ext_region@0, compatible id removed-dma-pool
18[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x86800000, size 90 MiB
19[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node modem_region@0, compatible id removed-dma-pool
20[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x8c200000, size 17 MiB
21[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node adsp_fw_region@0, compatible id removed-dma-pool
22[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x8d300000, size 7 MiB
23[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
24[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x8f000000, size 4 MiB
25[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node venus_region@0, compatible id removed-dma-pool
26[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'qseecom_region@0' node: base 0xfec00000, size 16 MiB
27[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0xfec00000, size 16 MiB
28[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool
29[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'adsp_region@0' node: base 0xfe800000, size 4 MiB
30[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0xfe800000, size 4 MiB
31[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool
32[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0xaff00000, size 1 MiB
33[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node ramoops_region@AFF00000, compatible id removed-dma-pool
34[ 0.000000 / 01-01 00:00:00.000][0] cma: Reserved 16 MiB at 0xfd800000
35[ 0.000000 / 01-01 00:00:00.000][0] Memory policy: Data cache writealloc
36[ 0.000000 / 01-01 00:00:00.000][0] psci: probing for conduit method from DT.
37[ 0.000000 / 01-01 00:00:00.000][0] psci: PSCIv1.0 detected in firmware.
38[ 0.000000 / 01-01 00:00:00.000][0] psci: Using standard PSCI v0.2 function IDs
39[ 0.000000 / 01-01 00:00:00.000][0] PERCPU: Embedded 11 pages/cpu @ee70c000 s14528 r8192 d22336 u45056
40[ 0.000000 / 01-01 00:00:00.000][0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 512015
41[ 0.000000 / 01-01 00:00:00.000][0] BOARD: LGE rev_10
42[ 0.000000 / 01-01 00:00:00.000][0] LGE BOOT REASON: 0x0
43[ 0.000000 / 01-01 00:00:00.000][0] lge_set_panel_type: panel type = 22
44[ 0.000000 / 01-01 00:00:00.000][0] LGE One Binary Sku carrier : 0 TMUS71
45[ 0.000000 / 01-01 00:00:00.000][0] [Touch] LGE RECOVERY BOOT: 1
46[ 0.000000 / 01-01 00:00:00.000][0] param_dsi_status_disable: Set DSI status disable to 1
47[ 0.000000 / 01-01 00:00:00.000][0] PID hash table entries: 4096 (order: 2, 16384 bytes)
48[ 0.000000 / 01-01 00:00:00.000][0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
49[ 0.000000 / 01-01 00:00:00.000][0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
50[ 0.000000 / 01-01 00:00:00.000][0] Memory: 1849428K/2054140K available (13706K kernel code, 1270K rwdata, 6816K rodata, 482K init, 2982K bss, 204712K reserved, 1276924K highmem)
51[ 0.000000 / 01-01 00:00:00.000][0] Virtual kernel memory layout:
52[ 0.000000 / 01-01 00:00:00.000][0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
53[ 0.000000 / 01-01 00:00:00.000][0] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
54[ 0.000000 / 01-01 00:00:00.000][0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
55[ 0.000000 / 01-01 00:00:00.000][0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
56[ 0.000000 / 01-01 00:00:00.000][0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
57[ 0.000000 / 01-01 00:00:00.000][0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
58[ 0.000000 / 01-01 00:00:00.000][0] .text : 0xc0008000 - 0xc150aac8 (21515 kB)
59[ 0.000000 / 01-01 00:00:00.000][0] .init : 0xc1600000 - 0xc16788c0 ( 483 kB)
60[ 0.000000 / 01-01 00:00:00.000][0] .data : 0xc1700000 - 0xc183dabc (1271 kB)
61[ 0.000000 / 01-01 00:00:00.000][0] .bss : 0xc183db80 - 0xc1b27520 (2983 kB)
62[ 0.000000 / 01-01 00:00:00.000][0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
63[ 0.000000 / 01-01 00:00:00.000][0] HMP scheduling enabled.
64[ 0.000000 / 01-01 00:00:00.000][0] Preemptible hierarchical RCU implementation.
65[ 0.000000 / 01-01 00:00:00.000][0] RCU dyntick-idle grace-period acceleration is enabled.
66[ 0.000000 / 01-01 00:00:00.000][0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
67[ 0.000000 / 01-01 00:00:00.000][0] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
68[ 0.000000 / 01-01 00:00:00.000][0] NR_IRQS:16 nr_irqs:16 16
69[ 0.000000 / 01-01 00:00:00.000][0] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
70[ 0.000000 / 01-01 00:00:00.000][0] MPM 1 irq mapping errored -517
71[ 0.000000 / 01-01 00:00:00.000][0] Offload RCU callbacks from all CPUs
72[ 0.000000 / 01-01 00:00:00.000][0] Offload RCU callbacks from CPUs: 0-3.
73[ 0.000000 / 01-01 00:00:00.000][0] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
74[ 0.000005 / 01-01 00:00:00.000][0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
75[ 0.000023 / 01-01 00:00:00.000][0] Switching to timer-based delay loop, resolution 52ns
76[ 0.000042 / 01-01 00:00:00.000][0] Switched to clocksource arch_sys_counter
77[ 0.000630 / 01-01 00:00:00.000][0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
78[ 0.000648 / 01-01 00:00:00.000][0] pid_max: default: 32768 minimum: 301
79[ 0.000717 / 01-01 00:00:00.000][0] Security Framework initialized
80[ 0.000735 / 01-01 00:00:00.000][0] SELinux: Initializing.
81[ 0.000815 / 01-01 00:00:00.000][0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
82[ 0.000832 / 01-01 00:00:00.000][0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
83[ 0.001410 / 01-01 00:00:00.000][0] Initializing cgroup subsys freezer
84[ 0.001441 / 01-01 00:00:00.000][0] CPU: Testing write buffer coherency: ok
85[ 0.001637 / 01-01 00:00:00.000][0] /cpus/cpu-map/cluster0: empty cluster
86[ 0.001790 / 01-01 00:00:00.000][0] Setting up static identity map for 0x80ddf8f8 - 0x80ddf950
87[ 0.012733 / 01-01 00:00:00.000][0]
88[ 0.012733 / 01-01 00:00:00.000][0] **********************************************************
89[ 0.012758 / 01-01 00:00:00.000][0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
90[ 0.012771 / 01-01 00:00:00.000][0] ** **
91[ 0.012784 / 01-01 00:00:00.000][0] ** trace_printk() being used. Allocating extra memory. **
92[ 0.012796 / 01-01 00:00:00.000][0] ** **
93[ 0.012808 / 01-01 00:00:00.000][0] ** This means that this is a DEBUG kernel and it is **
94[ 0.012821 / 01-01 00:00:00.000][0] ** unsafe for produciton use. **
95[ 0.012833 / 01-01 00:00:00.000][0] ** **
96[ 0.012845 / 01-01 00:00:00.000][0] ** If you see this message and you are not debugging **
97[ 0.012858 / 01-01 00:00:00.000][0] ** the kernel, report this immediately to your vendor! **
98[ 0.012870 / 01-01 00:00:00.000][0] ** **
99[ 0.012882 / 01-01 00:00:00.000][0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
100[ 0.012895 / 01-01 00:00:00.000][0] **********************************************************
101[ 0.013936 / 01-01 00:00:00.000][0] MSM Memory Dump base table set up
102[ 0.013964 / 01-01 00:00:00.000][0] MSM Memory Dump apps data table set up
103[ 0.014024 / 01-01 00:00:00.000][0] Configuring XPU violations to be fatal errors
104[ 0.014938 / 01-01 00:00:00.000][0] panic-handler: reserved[@0xafb00000+@0x400000)
105[ 0.015320 / 01-01 00:00:00.000][0] mem-address=0xaff00000
106[ 0.015333 / 01-01 00:00:00.000][0] mem-size=0x80000
107[ 0.018010 / 01-01 00:00:00.000][1] CPU1: Booted secondary processor
108[ 0.019278 / 01-01 00:00:00.000][2] CPU2: Booted secondary processor
109[ 0.020669 / 01-01 00:00:00.019][3] CPU3: Booted secondary processor
110[ 0.020791 / 01-01 00:00:00.019][2] Brought up 4 CPUs
111[ 0.020840 / 01-01 00:00:00.019][2] SMP: Total of 4 processors activated (153.60 BogoMIPS).
112[ 0.020854 / 01-01 00:00:00.019][2] CPU: All CPU(s) started in SVC mode.
113[ 0.031650 / 01-01 00:00:00.029][2] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
114[ 0.034428 / 01-01 00:00:00.029][3] pinctrl core: initialized pinctrl subsystem
115[ 0.034773 / 01-01 00:00:00.029][3] regulator-dummy: no parameters
116[ 0.082644 / 01-01 00:00:00.079][3] NET: Registered protocol family 16
117[ 0.088866 / 01-01 00:00:00.079][3] DMA: preallocated 256 KiB pool for atomic coherent allocations
118[ 0.089561 / 01-01 00:00:00.079][3] scm_call failed: func id 0x2000101, ret: -1, syscall returns: 0x0, 0x0, 0x0
119[ 0.100138 / 01-01 00:00:00.099][3] cpuidle: using governor ladder
120[ 0.120117 / 01-01 00:00:00.119][3] cpuidle: using governor menu
121[ 0.140114 / 01-01 00:00:00.139][3] cpuidle: using governor qcom
122[ 0.166916 / 01-01 00:00:00.159][3] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
123[ 0.175089 / 01-01 00:00:00.169][3] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
124[ 0.175417 / 01-01 00:00:00.169][3] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
125[ 0.180531 / 01-01 00:00:00.179][3] irq: no irq domain found for /soc/pinctrl@1000000 !
126[ 0.180749 / 01-01 00:00:00.179][3] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0
127[ 0.181373 / 01-01 00:00:00.179][3] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
128[ 0.181726 / 01-01 00:00:00.179][3] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
129[ 0.182078 / 01-01 00:00:00.179][3] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
130[ 0.182285 / 01-01 00:00:00.179][3] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
131[ 0.182642 / 01-01 00:00:00.179][3] ACC: mem_acc_efuse_init: efuse_addr = 0x000a4000 (len=0x1000)
132[ 0.182806 / 01-01 00:00:00.179][3] ACC: mem_acc_parse_override_fuse_version_map: qcom,override-fuse-version-map tuple match not found
133[ 0.182941 / 01-01 00:00:00.179][3] mem_acc_corner: 0 <--> 0 mV at 0 mV
134[ 0.188737 / 01-01 00:00:00.179][3] console [pstore-1] enabled
135[ 0.188752 / 01-01 00:00:00.179][3] pstore: Registered ramoops as persistent store backend
136[ 0.188769 / 01-01 00:00:00.179][3] ramoops: attached 0x80000@0xaff00000, ecc: 0/0
137[ 0.189943 / 01-01 00:00:00.179][3] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
138[ 0.189960 / 01-01 00:00:00.179][3] hw-breakpoint: maximum watchpoint size is 8 bytes.
139[ 0.191709 / 01-01 00:00:00.189][3] __of_mpm_init(): MPM driver mapping exists
140[ 0.193068 / 01-01 00:00:00.189][3] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
141[ 0.193086 / 01-01 00:00:00.189][3] msm_rpm_dev_probe: APSS-RPM communication over SMD
142[ 0.193103 / 01-01 00:00:00.189][3] smd_open() before smd_init()
143[ 0.193915 / 01-01 00:00:00.189][3] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
144[ 0.198269 / 01-01 00:00:00.189][3] smd_channel_probe_now: allocation table not initialized
145[ 0.198411 / 01-01 00:00:00.189][3] smd_channel_probe_now: allocation table not initialized
146[ 0.198544 / 01-01 00:00:00.189][3] smd_channel_probe_now: allocation table not initialized
147[ 0.203378 / 01-01 00:00:00.199][1] pm8917_s5: 1050 <--> 1350 mV at 1225 mV normal idle
148[ 0.203550 / 01-01 00:00:00.199][1] spm_regulator_probe: name=pm8917_s5, range=LV, voltage=1225000 uV, mode=AUTO, step rate=1200 uV/us
149[ 0.204112 / 01-01 00:00:00.199][1] cpr_efuse_init: apc_corner: efuse_addr = 0x000a4000 (len=0x1000)
150[ 0.204160 / 01-01 00:00:00.199][1] cpr_read_fuse_revision: apc_corner: fuse revision = 2
151[ 0.204184 / 01-01 00:00:00.199][1] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x5069202137b2e06a, speed_bits = 0
152[ 0.204207 / 01-01 00:00:00.199][1] cpr_parse_pvs_version_fuse: apc_corner: [row: 37]: 0x5069202137b2e06a, pvs_version = 0
153[ 0.204299 / 01-01 00:00:00.199][1] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[1]: 1115000 -> 1145000 uV
154[ 0.204322 / 01-01 00:00:00.199][1] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1175000 -> 1180000 uV
155[ 0.204344 / 01-01 00:00:00.199][1] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[3]: 1280000 -> 1290000 uV
156[ 0.204364 / 01-01 00:00:00.199][1] cpr_pvs_init: apc_corner: pvs voltage: [1145000 1180000 1290000] uV
157[ 0.204383 / 01-01 00:00:00.199][1] cpr_pvs_init: apc_corner: ceiling voltage: [1155000 1225000 1350000] uV
158[ 0.204401 / 01-01 00:00:00.199][1] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1090000] uV
159[ 0.204565 / 01-01 00:00:00.199][1] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 4
160[ 0.204600 / 01-01 00:00:00.199][1] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
161[ 0.204637 / 01-01 00:00:00.199][1] cpr_init_cpr_efuse: apc_corner: [row:67] = 0x248e6e4404952ea7
162[ 0.204668 / 01-01 00:00:00.199][1] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 923
163[ 0.204686 / 01-01 00:00:00.199][1] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 1028
164[ 0.204704 / 01-01 00:00:00.199][1] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1210
165[ 0.204741 / 01-01 00:00:00.199][1] cpr_adjust_target_quots: apc_corner: Corner[1]: adjusted target quot = 973
166[ 0.204762 / 01-01 00:00:00.199][1] cpr_adjust_target_quots: apc_corner: Corner[2]: adjusted target quot = 1068
167[ 0.204783 / 01-01 00:00:00.199][1] cpr_adjust_target_quots: apc_corner: Corner[3]: adjusted target quot = 1260
168[ 0.204870 / 01-01 00:00:00.199][1] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.708
169[ 0.204888 / 01-01 00:00:00.199][1] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.625
170[ 0.204911 / 01-01 00:00:00.199][1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 973
171[ 0.204927 / 01-01 00:00:00.199][1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 1068
172[ 0.204943 / 01-01 00:00:00.199][1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 1165
173[ 0.204959 / 01-01 00:00:00.199][1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 1260
174[ 0.204975 / 01-01 00:00:00.199][1] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 1260
175[ 0.205127 / 01-01 00:00:00.199][1] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
176[ 0.205487 / 01-01 00:00:00.199][2] apc_corner: 0 <--> 0 mV
177[ 0.206258 / 01-01 00:00:00.199][2] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
178[ 0.206434 / 01-01 00:00:00.199][2] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
179[ 0.206455 / 01-01 00:00:00.199][2] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
180[ 0.206622 / 01-01 00:00:00.199][2] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
181[ 0.206768 / 01-01 00:00:00.199][2] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
182[ 0.206788 / 01-01 00:00:00.199][2] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
183[ 0.206964 / 01-01 00:00:00.199][2] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
184[ 0.207110 / 01-01 00:00:00.199][2] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
185[ 0.207130 / 01-01 00:00:00.199][2] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
186[ 0.211685 / 01-01 00:00:00.209][2] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
187[ 0.211798 / 01-01 00:00:00.209][2] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
188[ 0.211816 / 01-01 00:00:00.209][2] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
189[ 0.211837 / 01-01 00:00:00.209][2] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
190[ 0.211856 / 01-01 00:00:00.209][2] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
191[ 0.212822 / 01-01 00:00:00.209][2] sps:sps is ready.
192[ 0.215036 / 01-01 00:00:00.209][2] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
193[ 0.215058 / 01-01 00:00:00.209][2] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
194[ 0.217647 / 01-01 00:00:00.209][1] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
195[ 0.217667 / 01-01 00:00:00.209][1] msm_rpm_dev_probe: APSS-RPM communication over SMD
196[ 0.218359 / 01-01 00:00:00.209][1] pm8917_s1: 1000 <--> 1225 mV at 1000 mV normal idle
197[ 0.218981 / 01-01 00:00:00.209][1] pm8917_s2_level: 0 <--> 0 mV at 0 mV normal idle
198[ 0.219430 / 01-01 00:00:00.209][1] pm8917_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle
199[ 0.219874 / 01-01 00:00:00.209][1] pm8917_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle
200[ 0.220480 / 01-01 00:00:00.219][1] pm8917_s3: 1300 mV normal idle
201[ 0.221034 / 01-01 00:00:00.219][1] pm8917_s4: 2050 mV normal idle
202[ 0.221580 / 01-01 00:00:00.219][1] pm8917_l2: 1200 mV normal idle
203[ 0.222150 / 01-01 00:00:00.219][1] pm8917_l3_level_ao: 0 <--> 0 mV at 0 mV normal idle
204[ 0.222564 / 01-01 00:00:00.219][1] pm8917_l3_level_so: 0 <--> 0 mV at 0 mV normal idle
205[ 0.223115 / 01-01 00:00:00.219][1] pm8917_l5: 1800 mV normal idle
206[ 0.223679 / 01-01 00:00:00.219][1] pm8917_l6: 1800 mV normal idle
207[ 0.224255 / 01-01 00:00:00.219][1] pm8917_l7: 1800 mV normal idle
208[ 0.224662 / 01-01 00:00:00.219][1] pm8917_l7_ao: 1800 mV normal idle
209[ 0.225240 / 01-01 00:00:00.219][1] pm8917_l8: 2850 <--> 2900 mV at 2900 mV normal idle
210[ 0.225822 / 01-01 00:00:00.219][1] pm8917_l9: 3000 <--> 3300 mV at 3000 mV normal idle
211[ 0.226405 / 01-01 00:00:00.219][1] pm8917_l10: 2800 <--> 3000 mV at 2800 mV normal idle
212[ 0.226995 / 01-01 00:00:00.219][1] pm8917_l11: 2950 mV normal idle
213[ 0.227567 / 01-01 00:00:00.219][1] pm8917_l12: 1800 <--> 2950 mV at 1800 mV normal idle
214[ 0.228173 / 01-01 00:00:00.219][1] pm8917_l13: 3075 mV normal idle
215[ 0.228763 / 01-01 00:00:00.219][1] pm8917_l14: 1800 <--> 3300 mV at 1800 mV normal idle
216[ 0.229355 / 01-01 00:00:00.219][1] pm8917_l15: 1800 <--> 3300 mV at 1800 mV normal idle
217[ 0.229949 / 01-01 00:00:00.219][1] pm8917_l16: 1800 mV normal idle
218[ 0.230604 / 01-01 00:00:00.229][1] pm8917_l17: 2800 <--> 2900 mV at 2800 mV normal idle
219[ 0.231201 / 01-01 00:00:00.229][1] pm8917_l19: 1225 <--> 1350 mV at 1225 mV normal idle
220[ 0.231767 / 01-01 00:00:00.229][1] pm8917_l22: 2900 mV normal idle
221[ 0.232319 / 01-01 00:00:00.229][1] pm8917_l23: 1200 mV normal idle
222[ 0.232661 / 01-01 00:00:00.229][1] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
223[ 0.232923 / 01-01 00:00:00.229][1] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
224[ 0.233103 / 01-01 00:00:00.229][1] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
225[ 0.233124 / 01-01 00:00:00.229][1] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
226[ 0.233347 / 01-01 00:00:00.229][1] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
227[ 0.233493 / 01-01 00:00:00.229][1] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
228[ 0.233513 / 01-01 00:00:00.229][1] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
229[ 0.233742 / 01-01 00:00:00.229][1] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
230[ 0.233888 / 01-01 00:00:00.229][1] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
231[ 0.233908 / 01-01 00:00:00.229][1] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
232[ 0.234444 / 01-01 00:00:00.229][1] msm-thermal soc:qcom,msm-thermal: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
233[ 0.234869 / 01-01 00:00:00.229][1] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
234[ 0.234888 / 01-01 00:00:00.229][1] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
235[ 0.234904 / 01-01 00:00:00.229][1] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
236[ 0.235803 / 01-01 00:00:00.229][2] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
237[ 0.235820 / 01-01 00:00:00.229][1] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
238[ 0.235835 / 01-01 00:00:00.229][1] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
239[ 0.235849 / 01-01 00:00:00.229][1] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
240[ 0.235863 / 01-01 00:00:00.229][1] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
241[ 0.235883 / 01-01 00:00:00.229][2] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
242[ 0.236802 / 01-01 00:00:00.229][2] qcom,gcc-8952 1800000.qcom,gcc: GPU speed bin: 0
243[ 0.249886 / 01-01 00:00:00.239][2] qcom,gcc-8952 1800000.qcom,gcc: Registered GCC clocks
244[ 0.250736 / 01-01 00:00:00.249][2] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
245[ 0.250969 / 01-01 00:00:00.249][0] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
246[ 0.250987 / 01-01 00:00:00.249][2] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
247[ 0.252246 / 01-01 00:00:00.249][0] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
248[ 0.252474 / 01-01 00:00:00.249][0] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
249[ 0.252492 / 01-01 00:00:00.249][0] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
250[ 0.253614 / 01-01 00:00:00.249][2] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
251[ 0.253848 / 01-01 00:00:00.249][0] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
252[ 0.253865 / 01-01 00:00:00.249][2] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
253[ 0.254350 / 01-01 00:00:00.249][2] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
254[ 0.254372 / 01-01 00:00:00.249][2] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
255[ 0.255257 / 01-01 00:00:00.249][0] populate_opp_table: clock-cpu-8939: OPP tables populated (cpu 0 and 3)
256[ 0.255273 / 01-01 00:00:00.249][2] print_opp_table: clock_cpu: a53_c1: OPP voltage for 960000000: 1145000
257[ 0.255291 / 01-01 00:00:00.249][2] print_opp_table: clock_cpu: a53_c1: OPP voltage for 1401000000: 1290000
258[ 0.362867 / 01-01 00:00:00.359][1] KPI: Bootloader start count = 25503
259[ 0.362890 / 01-01 00:00:00.359][1] KPI: Bootloader end count = 215979
260[ 0.362905 / 01-01 00:00:00.359][1] KPI: Bootloader display count = 42166
261[ 0.362920 / 01-01 00:00:00.359][1] KPI: Bootloader load kernel count = 1886
262[ 0.362936 / 01-01 00:00:00.359][1] KPI: Kernel MPM timestamp = 258475
263[ 0.362950 / 01-01 00:00:00.359][1] KPI: Kernel MPM Clock frequency = 32768
264[ 0.362980 / 01-01 00:00:00.359][1] socinfo_print: v0.10, id=303, ver=1.0, raw_id=86, raw_ver=0, hw_plat=97, hw_plat_ver=6
265[ 0.362980 / 01-01 00:00:00.359][1] accessory_chip=0, hw_plat_subtype=0, pmic_model=65561, pmic_die_revision=65536 foundry_id=1 serial_number=934469738
266[ 0.363677 / 01-01 00:00:00.359][1] qpnp_pin_of_gpio_xlate: no such PMIC gpio 7 in device topology
267[ 0.363814 / 01-01 00:00:00.359][1] eldo2_pm8917: no parameters
268[ 0.364896 / 01-01 00:00:00.359][1] SCSI subsystem initialized
269[ 0.365547 / 01-01 00:00:00.359][1] usbcore: registered new interface driver usbfs
270[ 0.365620 / 01-01 00:00:00.359][1] usbcore: registered new interface driver hub
271[ 0.365776 / 01-01 00:00:00.359][1] usbcore: registered new device driver usb
272[ 0.365932 / 01-01 00:00:00.359][1] media: Linux media interface: v0.10
273[ 0.365999 / 01-01 00:00:00.359][1] Linux video capture interface: v2.00
274[ 0.367413 / 01-01 00:00:00.359][1] cpufreq: driver msm up and running
275[ 0.367938 / 01-01 00:00:00.359][1] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
276[ 0.368135 / 01-01 00:00:00.359][1] ION heap system created
277[ 0.368243 / 01-01 00:00:00.359][1] ION heap mm created at 0xfd800000 with size 1000000
278[ 0.368259 / 01-01 00:00:00.359][1] ION heap qsecom created at 0xfec00000 with size 1000000
279[ 0.368600 / 01-01 00:00:00.359][1] msm_bus_fabric_init_driver
280[ 0.378522 / 01-01 00:00:00.369][1] qcom,qpnp-power-on qpnp-power-on-4: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
281[ 0.378552 / 01-01 00:00:00.369][1] qcom,qpnp-power-on qpnp-power-on-4: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
282[ 0.378726 / 01-01 00:00:00.369][1] input: qpnp_pon as /devices/virtual/input/input0
283[ 0.379067 / 01-01 00:00:00.369][1] pon_spare_reg: no parameters
284[ 0.379142 / 01-01 00:00:00.369][1] qcom,qpnp-power-on qpnp-power-on-13: No PON config. specified
285[ 0.379195 / 01-01 00:00:00.369][1] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
286[ 0.379216 / 01-01 00:00:00.369][1] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
287[ 0.379376 / 01-01 00:00:00.369][1] PMIC@SID0: PM8937 v1.0 options: 0, 2, 0, 0
288[ 0.379469 / 01-01 00:00:00.369][1] PMIC@SID2: PMI8940 v2.0 options: 0, 0, 0, 0
289[ 0.380776 / 01-01 00:00:00.379][1] gdsc_venus: no parameters
290[ 0.381040 / 01-01 00:00:00.379][1] gdsc_mdss: no parameters
291[ 0.381303 / 01-01 00:00:00.379][1] gdsc_jpeg: no parameters
292[ 0.381769 / 01-01 00:00:00.379][1] gdsc_vfe: no parameters
293[ 0.382244 / 01-01 00:00:00.379][1] gdsc_vfe1: no parameters
294[ 0.382502 / 01-01 00:00:00.379][1] gdsc_cpp: no parameters
295[ 0.382751 / 01-01 00:00:00.379][1] gdsc_oxili_gx: no parameters
296[ 0.382946 / 01-01 00:00:00.379][1] gdsc_venus_core0: fast normal
297[ 0.383573 / 01-01 00:00:00.379][1] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
298[ 0.383585 / 01-01 00:00:00.379][1] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC disabled
299[ 0.384153 / 01-01 00:00:00.379][1] dsi_pll_clock_register_lpm: Registered DSI PLL:0 clocks successfully
300[ 0.385121 / 01-01 00:00:00.379][1] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at f0340000, with 1 ctx banks
301[ 0.385709 / 01-01 00:00:00.379][1] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at f0380000, with 21 ctx banks
302[ 0.391538 / 01-01 00:00:00.389][1] msm_iommu_ctx 1f08000.qcom,iommu-ctx: context gfx3d_user using bank 0
303[ 0.391684 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context q6 using bank 0
304[ 0.391817 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1
305[ 0.391949 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2
306[ 0.392084 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3
307[ 0.392217 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
308[ 0.392353 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5
309[ 0.392485 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6
310[ 0.392647 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8
311[ 0.392806 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context mss_nav using bank 9
312[ 0.392964 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10
313[ 0.393126 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11
314[ 0.393289 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15
315[ 0.393451 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16
316[ 0.393610 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17
317[ 0.393771 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18
318[ 0.393932 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19
319[ 0.394092 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20
320[ 0.394253 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21
321[ 0.394416 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22
322[ 0.394575 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context mss_mcdma using bank 24
323[ 0.394735 / 01-01 00:00:00.389][1] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23
324[ 0.397351 / 01-01 00:00:00.389][1] Advanced Linux Sound Architecture Driver Initialized.
325[ 0.398251 / 01-01 00:00:00.389][0] Bluetooth: ee04bed0
326[ 0.398286 / 01-01 00:00:00.389][1] NET: Registered protocol family 31
327[ 0.398297 / 01-01 00:00:00.389][0] Bluetooth: ee04bed0
328[ 0.398307 / 01-01 00:00:00.389][1] Bluetooth: ee04bec8Bluetooth: ee04beb0
329[ 0.398335 / 01-01 00:00:00.389][1] Bluetooth: ee04bec0[ 0.398532 / 01-01 00:00:00.389][1] cfg80211: Calling CRDA to update world regulatory domain
330[ 0.398554 / 01-01 00:00:00.389][1] cfg80211: World regulatory domain updated:
331[ 0.398563 / 01-01 00:00:00.389][0] cfg80211: DFS Master region: unset
332[ 0.398570 / 01-01 00:00:00.389][1] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
333[ 0.398582 / 01-01 00:00:00.389][1] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
334[ 0.398592 / 01-01 00:00:00.389][1] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
335[ 0.398602 / 01-01 00:00:00.389][1] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
336[ 0.398613 / 01-01 00:00:00.389][1] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
337[ 0.398623 / 01-01 00:00:00.389][1] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
338[ 0.398634 / 01-01 00:00:00.389][1] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
339[ 0.398644 / 01-01 00:00:00.389][1] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
340[ 0.398654 / 01-01 00:00:00.389][1] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
341[ 0.401704 / 01-01 00:00:00.399][1] Switched to clocksource arch_sys_counter
342[ 0.421767 / 01-01 00:00:00.419][1] bcl_peripheral:bcl_perph_init BCL Initialized
343[ 0.423295 / 01-01 00:00:00.419][1] NET: Registered protocol family 2
344[ 0.423704 / 01-01 00:00:00.419][1] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
345[ 0.423758 / 01-01 00:00:00.419][1] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
346[ 0.423844 / 01-01 00:00:00.419][1] TCP: Hash tables configured (established 8192 bind 8192)
347[ 0.423878 / 01-01 00:00:00.419][1] TCP: reno registered
348[ 0.423890 / 01-01 00:00:00.419][1] UDP hash table entries: 512 (order: 2, 16384 bytes)
349[ 0.423916 / 01-01 00:00:00.419][1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
350[ 0.424019 / 01-01 00:00:00.419][1] NET: Registered protocol family 1
351[ 0.424880 / 01-01 00:00:00.419][1] gcc-mdss-8952 soc:qcom,gcc-mdss@1800000: Registered GCC MDSS clocks.
352[ 0.425901 / 01-01 00:00:00.419][1] Trying to unpack rootfs image as initramfs...
353[ 0.653062 / 01-01 00:00:00.649][1] Freeing initrd memory: 6248K (c3600000 - c3c1a000)
354[ 0.656647 / 01-01 00:00:00.649][1] hw perfevents: enabled with ARMv8 Cortex-A53 PMU driver, 7 counters available
355[ 0.659639 / 01-01 00:00:00.649][3] futex hash table entries: 1024 (order: 4, 65536 bytes)
356[ 0.659685 / 01-01 00:00:00.649][3] Initialise system trusted keyring
357[ 0.659736 / 01-01 00:00:00.649][3] audit: initializing netlink subsys (disabled)
358[ 0.659773 / 01-01 00:00:00.649][3] audit: type=2000 audit(0.649:1): initialized
359[ 0.660185 / 01-01 00:00:00.659][3] vmscan: error setting kswapd cpu affinity mask
360[ 0.660250 / 01-01 00:00:00.659][3] workingset: timestamp_bits=27 max_order=19 bucket_order=0
361[ 0.663769 / 01-01 00:00:00.659][3] VFS: Disk quotas dquot_6.5.2
362[ 0.663869 / 01-01 00:00:00.659][3] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
363[ 0.665110 / 01-01 00:00:00.659][3] Registering sdcardfs 2.1.3-2
364[ 0.665203 / 01-01 00:00:00.659][3] fuse init (API version 7.23)
365[ 0.667127 / 01-01 00:00:00.659][3] Key type asymmetric registered
366[ 0.667144 / 01-01 00:00:00.659][3] Asymmetric key parser 'x509' registered
367[ 0.667195 / 01-01 00:00:00.659][3] bounce: pool size: 64 pages
368[ 0.667287 / 01-01 00:00:00.659][3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
369[ 0.667301 / 01-01 00:00:00.659][3] io scheduler noop registered
370[ 0.667312 / 01-01 00:00:00.659][3] io scheduler deadline registered
371[ 0.667394 / 01-01 00:00:00.659][3] io scheduler cfq registered (default)
372[ 0.670712 / 01-01 00:00:00.669][3] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
373[ 0.670732 / 01-01 00:00:00.669][3] mdss_mdp_probe+0x18c/0x1050->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
374[ 0.671237 / 01-01 00:00:00.669][3] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
375[ 0.671736 / 01-01 00:00:00.669][3] No change in context(0==0), skip
376[ 0.672189 / 01-01 00:00:00.669][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
377[ 0.672217 / 01-01 00:00:00.669][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
378[ 0.672228 / 01-01 00:00:00.669][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
379[ 0.672250 / 01-01 00:00:00.669][3] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
380[ 0.672272 / 01-01 00:00:00.669][3] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
381[ 0.672289 / 01-01 00:00:00.669][3] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
382[ 0.672412 / 01-01 00:00:00.669][3] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
383[ 0.672643 / 01-01 00:00:00.669][3] xlog_status: enable:0, panic:1, dump:3
384[ 0.673241 / 01-01 00:00:00.669][3] mdss_mdp_probe: mdss version = 0x100f0000, bootloader display is on, num 1, intf_sel=0x00000100
385[ 0.675450 / 01-01 00:00:00.669][3] mdss_smmu_util_parse_dt_clock: clocks are not defined
386[ 0.675484 / 01-01 00:00:00.669][3] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
387[ 0.675512 / 01-01 00:00:00.669][3] mdss_smmu_util_parse_dt_clock: clocks are not defined
388[ 0.675529 / 01-01 00:00:00.669][3] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
389[ 0.677024 / 01-01 00:00:00.669][3] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
390[ 0.677565 / 01-01 00:00:00.669][3] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_tcl_ft8006m_hd_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_tcl_ft8006m_hd_video
391[ 0.677603 / 01-01 00:00:00.669][3] mdss_dsi_panel_init: Panel Name = tcl ft8006m 720p video mode dsi panel
392[ 0.677801 / 01-01 00:00:00.669][3] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_tcl_ft8006m_hd_video" (ee04b7a0)
393[ 0.677827 / 01-01 00:00:00.669][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
394[ 0.677842 / 01-01 00:00:00.669][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
395[ 0.677852 / 01-01 00:00:00.669][3] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
396[ 0.677990 / 01-01 00:00:00.669][3] mdss_dsi_parse_panel_features: ulps feature disabled
397[ 0.678002 / 01-01 00:00:00.669][0] mdss_dsi_parse_panel_features: ulps during suspend feature enabled
398[ 0.678013 / 01-01 00:00:00.669][3] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
399[ 0.678108 / 01-01 00:00:00.669][3] lge_mdss_panel_parse_dt_extra: esc-clk-rate not specified
400[ 0.678119 / 01-01 00:00:00.669][3] lge_mdss_panel_parse_dt_extra: failed to parse panel_id
401[ 0.678193 / 01-01 00:00:00.669][3] lge_set_display_power_ctrl: display_power_ctrl [0]
402[ 0.678202 / 01-01 00:00:00.669][3] lge_init_mfts: mfts_mode : 0
403[ 0.678333 / 01-01 00:00:00.669][3] no supply entry present: lge,extra-supply-entries
404[ 0.678357 / 01-01 00:00:00.669][3] mdss_dsi_parse_ctrl_params:4024 Unable to read qcom,display-id, data=00000000,len=45
405[ 0.678369 / 01-01 00:00:00.669][3] mdss_dsi_parse_gpio_params:4058, TE gpio not specified
406[ 0.678379 / 01-01 00:00:00.669][3] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
407[ 0.678394 / 01-01 00:00:00.669][3] lge_mdss_dsi_parse_gpio_params: num_gpios=4
408[ 0.678436 / 01-01 00:00:00.669][3] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=f017ab80 phy_regulator_size=30
409[ 0.678447 / 01-01 00:00:00.669][3] mdss_dsi_retrieve_ctrl_resources: ctrl_base=f0176000 ctrl_size=300 phy_base=f0178400 phy_size=280
410[ 0.678750 / 01-01 00:00:00.669][3] dsi_panel_device_register: Continuous splash enabled
411[ 0.678933 / 01-01 00:00:00.669][3] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
412[ 0.699748 / 01-01 00:00:00.689][3] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x1
413[ 0.700103 / 01-01 00:00:00.699][3] mdss_dsi_status_init: DSI status check interval:1700
414[ 0.700531 / 01-01 00:00:00.699][3] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
415[ 0.701271 / 01-01 00:00:00.699][3] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
416[ 0.701682 / 01-01 00:00:00.699][3] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
417[ 0.702149 / 01-01 00:00:00.699][3] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
418[ 0.702253 / 01-01 00:00:00.699][3] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
419[ 0.702352 / 01-01 00:00:00.699][3] mdss_mdp_splash_parse_dt: splash mem child node is not present
420[ 0.704973 / 01-01 00:00:00.699][3] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
421[ 0.705006 / 01-01 00:00:00.699][3] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
422[ 0.708765 / 01-01 00:00:00.699][3] In memshare_probe, Memshare probe success
423[ 0.710595 / 01-01 00:00:00.709][3] msm_rpm_log_probe: OK
424[ 0.713716 / 01-01 00:00:00.709][3] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
425[ 0.715568 / 01-01 00:00:00.709][3] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id.
426[ 0.716319 / 01-01 00:00:00.709][3] bootlog_probe: start 0x1383
427[ 0.716331 / 01-01 00:00:00.709][3] bootlog_probe: size 0x1fff4
428[ 0.716339 / 01-01 00:00:00.709][3] -------------------------------------------------
429[ 0.716348 / 01-01 00:00:00.709][3] below logs are got from bootloader
430[ 0.716356 / 01-01 00:00:00.709][3] -------------------------------------------------
431[ 0.716363 / 01-01 00:00:00.709][3]
432[ 0.716372 / 01-01 00:00:00.709][3]
433[ 0.716391 / 01-01 00:00:00.709][3] Format: Type - Time(ms) - Log - Optional
434[ 0.716412 / 01-01 00:00:00.709][3] Type: B - Since Boot, D - Delta, S - Statistic
435[ 0.716433 / 01-01 00:00:00.709][3] S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3-00221
436[ 0.716450 / 01-01 00:00:00.709][3] S - IMAGE_VARIANT_STRING=LAASANAZA
437[ 0.716469 / 01-01 00:00:00.709][3] S - OEM_IMAGE_VERSION_STRING=LGE_MSM8917
438[ 0.716485 / 01-01 00:00:00.709][3] S - Boot Config, 0x000000e1
439[ 0.716500 / 01-01 00:00:00.709][3] B - 258 - PBL, Start
440[ 0.716523 / 01-01 00:00:00.709][3] B - 2944 - bootable_media_detect_entry, Start
441[ 0.716546 / 01-01 00:00:00.709][3] B - 61032 - bootable_media_detect_success, Start
442[ 0.716564 / 01-01 00:00:00.709][3] B - 61038 - elf_loader_entry, Start
443[ 0.716584 / 01-01 00:00:00.709][3] B - 62518 - auth_hash_seg_entry, Start
444[ 0.716603 / 01-01 00:00:00.709][3] B - 99544 - auth_hash_seg_exit, Start
445[ 0.716625 / 01-01 00:00:00.709][3] B - 130351 - elf_segs_hash_verify_entry, Start
446[ 0.716640 / 01-01 00:00:00.709][3] B - 247832 - PBL, End
447[ 0.716655 / 01-01 00:00:00.709][3] B - 258030 - SBL1, Start
448[ 0.716673 / 01-01 00:00:00.709][3] B - 261812 - pm_device_init, S
449[ 0.716697 / 01-01 00:00:00.709][3] B - 264984 - PON REASON:PM0:0x200000020 PM1:0x200000020
450[ 0.716716 / 01-01 00:00:00.709][3] B - 287218 - boot_flash_init, Start
451[ 0.716737 / 01-01 00:00:00.709][3] B - 287249 - boot_config_data_table_init, Start
452[ 0.716766 / 01-01 00:00:00.709][3] B - 287279 - CDT version:3,Platform ID:97,Major ID:1,Minor ID:0,Subtype:0
453[ 0.716785 / 01-01 00:00:00.709][3] B - 287310 - sbl1_ddr_set_params, S
454[ 0.716801 / 01-01 00:00:00.709][3] B - 297710 - cpr_init, S
455[ 0.716819 / 01-01 00:00:00.709][3] B - 301309 - Pre_DDR_clock_init, S
456[ 0.716837 / 01-01 00:00:00.709][3] B - 303231 - do ddr sanity test, S
457[ 0.716855 / 01-01 00:00:00.709][3] B - 303536 - pm_driver_init, S
458[ 0.716871 / 01-01 00:00:00.709][3] B - 307104 - vsense_init, S
459[ 0.716891 / 01-01 00:00:00.709][3] B - 307348 - DDR Training restore, Start
460[ 0.716907 / 01-01 00:00:00.709][3] B - 315888 - clock_init, S
461[ 0.716928 / 01-01 00:00:00.709][3] B - 316132 - pm_sbl_set_qpnp_smb_init start
462[ 0.716947 / 01-01 00:00:00.709][3] B - 316651 - raw vbat: 4563, gain: -20
463[ 0.716966 / 01-01 00:00:00.709][3] B - 316712 - raw vbat: 4563, gain: -20
464[ 0.716985 / 01-01 00:00:00.709][3] B - 317810 - device will be power off
465[ 0.717001 / 01-01 00:00:00.709][3] B - 317810 - Img Ld, S
466[ 0.717022 / 01-01 00:00:00.709][3] D - 103547 - QSEE Img Ld, D - (1541808 Bytes)
467[ 0.717037 / 01-01 00:00:00.709][3] B - 421388 - Img Ld, S
468[ 0.717060 / 01-01 00:00:00.709][3] D - 762 - SEC Image Loaded, Delta - (2048 Bytes)
469[ 0.717081 / 01-01 00:00:00.709][3] B - 422852 - sbl1_efs_handle_cookies, Start
470[ 0.717097 / 01-01 00:00:00.709][3] B - 428281 - [ADC]rev=1482
471[ 0.717115 / 01-01 00:00:00.709][3] B - 428311 - read_usb_cable_type
472[ 0.717134 / 01-01 00:00:00.709][3] B - 431910 - [ADC]usb_id=1786 type=10
473[ 0.717155 / 01-01 00:00:00.709][3] B - 540094 - boot_power_longkey_check, start
474[ 0.717184 / 01-01 00:00:00.709][3] B - 540155 - boot_cause = 0x20, wboot_cause_1 = 0x0, wboot_cause_2 = 0x0
475[ 0.717204 / 01-01 00:00:00.709][3] D - 152 - boot_power_longkey, Delta
476[ 0.717219 / 01-01 00:00:00.709][3] B - 540246 - Img Ld, S
477[ 0.717240 / 01-01 00:00:00.709][3] D - 35411 - DEVCFG Img Ld, D - (55932 Bytes)
478[ 0.717255 / 01-01 00:00:00.709][3] B - 576175 - Img Ld, S
479[ 0.717275 / 01-01 00:00:00.709][3] D - 31781 - APDP Img Ld, D - (7696 Bytes)
480[ 0.717290 / 01-01 00:00:00.709][3] B - 607956 - Img Ld, S
481[ 0.717311 / 01-01 00:00:00.709][3] D - 43188 - RPM Img Ld, D - (179368 Bytes)
482[ 0.717326 / 01-01 00:00:00.709][3] B - 651144 - Img Ld, S
483[ 0.717348 / 01-01 00:00:00.709][3] D - 65697 - APPSBL Img Ld, D - (757904 Bytes)
484[ 0.717366 / 01-01 00:00:00.709][3] B - 716841 - QSEE Execution, S
485[ 0.717381 / 01-01 00:00:00.709][3] B - 716933 - SBL1, End
486[ 0.717396 / 01-01 00:00:00.709][3] D - 458903 - SBL1, Delta
487[ 0.717411 / 01-01 00:00:00.709][3] S - eMMC Perf, 28000 KB/s
488[ 0.717425 / 01-01 00:00:00.709][3] S - DDR Freq. 672 MHz
489[ 0.717440 / 01-01 00:00:00.709][3] S - Core 0 Freq. 800 MHz
490[ 0.717454 / 01-01 00:00:00.709][3] [40] card->ext_csd[192]=8
491[ 0.717472 / 01-01 00:00:00.709][3] [40] set_dload_mode: download_mode:0
492[ 0.717488 / 01-01 00:00:00.709][3] [40] Unsupported hardware id
493[ 0.717505 / 01-01 00:00:00.709][3] [40] PROTECTIVE_MBR_SIZE = 512
494[ 0.717521 / 01-01 00:00:00.709][3] [40] Qseecom Init Done in Appsbl
495[ 0.717563 / 01-01 00:00:00.709][3] [40] secure app region addr=0x85b00000 size=0x800000[40] TZ App region notif returned with status:0 addr:85b00000 size:8388608
496[ 0.717592 / 01-01 00:00:00.709][3] [40] TZ App log region register returned with status:0 addr:8f6d5000 size:4096
497[ 0.717610 / 01-01 00:00:00.709][3] [40] Qseecom TZ Init Done in Appsbl
498[ 0.717624 / 01-01 00:00:00.709][3] [70] Loading cmnlib done
499[ 0.717643 / 01-01 00:00:00.709][3] [80] <8>keymaster: "\"KEYMASTER Init \""
500[ 0.717669 / 01-01 00:00:00.709][3] [90] <8>keymaster: "\"cmd_id=KEYMASTER_READ_KM_DEVICE_STATE\""
501[ 0.717692 / 01-01 00:00:00.709][3] [100] get_lcd_maker_id: maker id0:0, maker id1:1, ret:2
502[ 0.717711 / 01-01 00:00:00.709][3] [100] oem.panel D : tcl_ft8006m_hd_video
503[ 0.717733 / 01-01 00:00:00.709][3] [170] get_image_info: img_info[0].name lglogo_image
504[ 0.717758 / 01-01 00:00:00.709][3] [170] get_image_info: img_info[1].name corner_quick_lglogo_image
505[ 0.717781 / 01-01 00:00:00.709][3] [170] get_image_info: img_info[2].name LGE_PM_NO_CHARGER
506[ 0.717806 / 01-01 00:00:00.709][3] [170] get_image_info: img_info[3].name LGE_PM_WEAK_CHARGING_ON
507[ 0.717832 / 01-01 00:00:00.709][3] [170] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_01
508[ 0.717857 / 01-01 00:00:00.709][3] [170] get_image_info: img_info[5].name LGE_PM_NO_BATTERY_ANI_02
509[ 0.717879 / 01-01 00:00:00.709][3] [170] get_image_info: img_info[6].name downloadmode
510[ 0.717903 / 01-01 00:00:00.709][3] [170] get_image_info: img_info[7].name load_charger_image
511[ 0.717923 / 01-01 00:00:00.709][3] [620] target_home_key: should be implemented
512[ 0.717945 / 01-01 00:00:00.709][3] [620] target_selectmode_init: selectmode_get_mode()=0
513[ 0.717963 / 01-01 00:00:00.709][3] [620] LGFTM_LAF_MID_REBOOT_FLAG is 0
514[ 0.717980 / 01-01 00:00:00.709][3] [620] PROTECTIVE_MBR_SIZE = 512
515[ 0.717996 / 01-01 00:00:00.709][3] [620] [LAF] boot_into_laf = 0
516[ 0.718013 / 01-01 00:00:00.709][3] [620] LGE_DMS - CRC = 0 STAGE= 0
517[ 0.718030 / 01-01 00:00:00.709][3] [620] boot from recovery partition
518[ 0.718044 / 01-01 00:00:00.709][3] [620] Device is unlocked!
519[ 0.718066 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[0].name lglogo_image
520[ 0.718091 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[1].name corner_quick_lglogo_image
521[ 0.718115 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[2].name LGE_PM_NO_CHARGER
522[ 0.718140 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[3].name LGE_PM_WEAK_CHARGING_ON
523[ 0.718166 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[4].name LGE_PM_NO_BATTERY_ANI_01
524[ 0.718191 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[5].name LGE_PM_NO_BATTERY_ANI_02
525[ 0.718212 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[6].name downloadmode
526[ 0.718236 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[7].name load_charger_image
527[ 0.718261 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[8].name factory_reset_no_1st_image
528[ 0.718287 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[9].name factory_reset_yes_1st_image
529[ 0.718313 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[10].name factory_reset_no_2nd_image
530[ 0.718340 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[11].name factory_reset_yes_2nd_image
531[ 0.718366 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[12].name info_display_guide_image
532[ 0.718391 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[13].name info_display_main_image
533[ 0.718414 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[14].name kswitch_factory
534[ 0.718437 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[15].name kswitch_dload
535[ 0.718459 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[16].name system_errlogo
536[ 0.718484 / 01-01 00:00:00.709][3] [750] get_image_info: img_info[17].name verifiedboot_orange_01
537[ 0.718506 / 01-01 00:00:00.709][3] [5770] <8>keymaster: "\"cmd_id=KEYMASTER_SET_ROT\""
538[ 0.718520 / 01-01 00:00:00.709][3] [5780] No unlock key!
539[ 0.718544 / 01-01 00:00:00.709][3] [5800] <8>keymaster: "\"cmd_id=KEYMASTER_MILESTONE_CALL\""
540[ 0.718562 / 01-01 00:00:00.709][3] [5800] Qseecom De-Init Done in Appsbl
541[ 0.718577 / 01-01 00:00:00.709][3] [5800] Channel alloc freed
542[ 0.718585 / 01-01 00:00:00.709][3]
543[ 0.718593 / 01-01 00:00:00.709][3] bootlog_probe: token (null)
544[ 0.718601 / 01-01 00:00:00.709][3] -------------------------------------------------
545[ 0.718613 / 01-01 00:00:00.709][3] Trying to free nonexistent resource <00000000affc0000-00000000affdffff>
546[ 0.719159 / 01-01 00:00:00.709][3] [QFUSE]lge_qfprom_probe : qfprom init
547[ 0.719684 / 01-01 00:00:00.709][3] msm_serial_hs module loaded
548[ 0.725824 / 01-01 00:00:00.719][3] lge_bypass_init
549[ 0.725893 / 01-01 00:00:00.719][3] lge_bypass_init: success
550[ 0.734519 / 01-01 00:00:00.729][3] brd: module loaded
551[ 0.736268 / 01-01 00:00:00.729][3] loop: module loaded
552[ 0.736555 / 01-01 00:00:00.729][3] zram: Added device: zram0
553[ 0.736823 / 01-01 00:00:00.729][3] zram: Added device: zram1
554[ 0.737247 / 01-01 00:00:00.729][3] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
555[ 0.737276 / 01-01 00:00:00.729][0] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
556[ 0.737288 / 01-01 00:00:00.729][3] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
557[ 0.737299 / 01-01 00:00:00.729][3] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
558[ 0.737885 / 01-01 00:00:00.729][3] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
559[ 0.739752 / 01-01 00:00:00.729][3] dw8768_probe: done
560[ 0.739844 / 01-01 00:00:00.729][3] i2c-core: driver [tabla-i2c-core] using legacy suspend method
561[ 0.739853 / 01-01 00:00:00.729][3] i2c-core: driver [tabla-i2c-core] using legacy resume method
562[ 0.739939 / 01-01 00:00:00.729][3] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
563[ 0.739948 / 01-01 00:00:00.729][3] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
564[ 0.740027 / 01-01 00:00:00.729][3] i2c-core: driver [tasha-i2c-core] using legacy suspend method
565[ 0.740036 / 01-01 00:00:00.729][3] i2c-core: driver [tasha-i2c-core] using legacy resume method
566[ 0.740707 / 01-01 00:00:00.739][3] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
567[ 0.741391 / 01-01 00:00:00.739][3] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000
568[ 0.741407 / 01-01 00:00:00.739][3] qce 720000.qcedev: CE device = 0x0
569[ 0.741407 / 01-01 00:00:00.739][3] , IO base, CE = 0xf07c0000
570[ 0.741407 / 01-01 00:00:00.739][3] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
571[ 0.741407 / 01-01 00:00:00.739][3] IO base BAM = 0x (null)
572[ 0.741407 / 01-01 00:00:00.739][3] BAM IRQ 142
573[ 0.741407 / 01-01 00:00:00.739][3] Engines Availability = 0x2010853
574[ 0.741595 / 01-01 00:00:00.739][0] sps:BAM 0x00704000 is registered.
575[ 0.741786 / 01-01 00:00:00.739][3] sps:BAM 0x00704000 (va:0xf0b80000) enabled: ver:0x27, number of pipes:8
576[ 0.742008 / 01-01 00:00:00.739][3] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 142
577[ 0.744248 / 01-01 00:00:00.739][3] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
578[ 0.744961 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000
579[ 0.744976 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: CE device = 0x0
580[ 0.744976 / 01-01 00:00:00.739][3] , IO base, CE = 0xf0bc0000
581[ 0.744976 / 01-01 00:00:00.739][3] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
582[ 0.744976 / 01-01 00:00:00.739][3] IO base BAM = 0x (null)
583[ 0.744976 / 01-01 00:00:00.739][3] BAM IRQ 142
584[ 0.744976 / 01-01 00:00:00.739][3] Engines Availability = 0x2010853
585[ 0.745315 / 01-01 00:00:00.739][3] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 142
586[ 0.746872 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-ecb-aes
587[ 0.746953 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-cbc-aes
588[ 0.747030 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-ctr-aes
589[ 0.747106 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-ecb-des
590[ 0.747182 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-cbc-des
591[ 0.747258 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-ecb-3des
592[ 0.747341 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-cbc-3des
593[ 0.747418 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-xts-aes
594[ 0.747494 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-sha1
595[ 0.747572 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-sha256
596[ 0.747651 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
597[ 0.747728 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
598[ 0.747806 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
599[ 0.747883 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
600[ 0.747961 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
601[ 0.748039 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
602[ 0.748116 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
603[ 0.748194 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
604[ 0.748274 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-aes-ccm
605[ 0.748352 / 01-01 00:00:00.739][3] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
606[ 0.749351 / 01-01 00:00:00.739][3] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
607[ 0.749502 / 01-01 00:00:00.739][3] ICE IRQ = 145
608[ 0.750341 / 01-01 00:00:00.749][3] SCSI Media Changer driver v0.25
609[ 0.751413 / 01-01 00:00:00.749][3] tun: Universal TUN/TAP device driver, 1.6
610[ 0.751424 / 01-01 00:00:00.749][3] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
611[ 0.752976 / 01-01 00:00:00.749][3] PPP generic driver version 2.4.2
612[ 0.753063 / 01-01 00:00:00.749][3] PPP BSD Compression module registered
613[ 0.753076 / 01-01 00:00:00.749][3] PPP Deflate Compression module registered
614[ 0.753098 / 01-01 00:00:00.749][3] PPP MPPE Compression module registered
615[ 0.753115 / 01-01 00:00:00.749][3] NET: Registered protocol family 24
616[ 0.753588 / 01-01 00:00:00.749][3] wcnss: wcnss_wlan_probe()
617[ 0.753648 / 01-01 00:00:00.749][3] wcnss_wlan probed in built-in mode
618[ 0.754225 / 01-01 00:00:00.749][3] usbcore: registered new interface driver catc
619[ 0.754240 / 01-01 00:00:00.749][3] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
620[ 0.754276 / 01-01 00:00:00.749][3] usbcore: registered new interface driver pegasus
621[ 0.754317 / 01-01 00:00:00.749][3] usbcore: registered new interface driver rtl8150
622[ 0.754356 / 01-01 00:00:00.749][3] usbcore: registered new interface driver r8152
623[ 0.754369 / 01-01 00:00:00.749][3] hso: /data001/jenkins/SBS9001/recovery/cv1_lao_com_mpcs_232436/android/kernel/msm-3.18/drivers/net/usb/hso.c: Option Wireless
624[ 0.754424 / 01-01 00:00:00.749][3] usbcore: registered new interface driver hso
625[ 0.754468 / 01-01 00:00:00.749][3] usbcore: registered new interface driver asix
626[ 0.754509 / 01-01 00:00:00.749][3] usbcore: registered new interface driver ax88179_178a
627[ 0.754548 / 01-01 00:00:00.749][3] usbcore: registered new interface driver cdc_ether
628[ 0.754586 / 01-01 00:00:00.749][3] usbcore: registered new interface driver cdc_eem
629[ 0.754624 / 01-01 00:00:00.749][3] usbcore: registered new interface driver dm9601
630[ 0.754662 / 01-01 00:00:00.749][3] usbcore: registered new interface driver sr9700
631[ 0.754707 / 01-01 00:00:00.749][3] usbcore: registered new interface driver CoreChips
632[ 0.754755 / 01-01 00:00:00.749][3] usbcore: registered new interface driver smsc75xx
633[ 0.754805 / 01-01 00:00:00.749][3] usbcore: registered new interface driver smsc95xx
634[ 0.754844 / 01-01 00:00:00.749][3] usbcore: registered new interface driver gl620a
635[ 0.754883 / 01-01 00:00:00.749][3] usbcore: registered new interface driver net1080
636[ 0.754922 / 01-01 00:00:00.749][3] usbcore: registered new interface driver plusb
637[ 0.754962 / 01-01 00:00:00.749][3] usbcore: registered new interface driver rndis_host
638[ 0.755001 / 01-01 00:00:00.749][3] usbcore: registered new interface driver cdc_subset
639[ 0.755040 / 01-01 00:00:00.749][3] usbcore: registered new interface driver zaurus
640[ 0.755081 / 01-01 00:00:00.749][3] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
641[ 0.755245 / 01-01 00:00:00.749][3] usbcore: registered new interface driver int51x1
642[ 0.755289 / 01-01 00:00:00.749][3] usbcore: registered new interface driver kalmia
643[ 0.755329 / 01-01 00:00:00.749][3] usbcore: registered new interface driver ipheth
644[ 0.755371 / 01-01 00:00:00.749][3] usbcore: registered new interface driver sierra_net
645[ 0.755414 / 01-01 00:00:00.749][3] usbcore: registered new interface driver cx82310_eth
646[ 0.755462 / 01-01 00:00:00.749][3] usbcore: registered new interface driver cdc_ncm
647[ 0.755503 / 01-01 00:00:00.749][3] usbcore: registered new interface driver lg-vl600
648[ 0.755543 / 01-01 00:00:00.749][3] usbcore: registered new interface driver qmi_wwan
649[ 0.755583 / 01-01 00:00:00.749][3] usbcore: registered new interface driver cdc_mbim
650[ 0.755967 / 01-01 00:00:00.749][3] msm_sharedmem: sharedmem_register_qmi: qmi init successful
651[ 0.756788 / 01-01 00:00:00.749][0] scm_call failed: func id 0x2000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
652[ 0.756800 / 01-01 00:00:00.749][0] hyp_assign_table: Failed to assign memory protection, ret = -5
653[ 0.756812 / 01-01 00:00:00.749][0] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160xfdc00000 size=1572864 err=-5
654[ 0.756906 / 01-01 00:00:00.749][0] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
655[ 0.757438 / 01-01 00:00:00.749][0] msm_otg 78db000.usb: msm_otg probe
656[ 0.760993 / 01-01 00:00:00.759][0] msm_otg 78db000.usb: OTG regs = f033c000
657[ 0.762636 / 01-01 00:00:00.759][0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
658[ 0.762653 / 01-01 00:00:00.759][0] ehci-msm: Qualcomm On-Chip EHCI Host Controller
659[ 0.763193 / 01-01 00:00:00.759][0] Unable to get vbus_otg
660[ 0.763206 / 01-01 00:00:00.759][0] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
661[ 0.763310 / 01-01 00:00:00.759][0] usbcore: registered new interface driver cdc_acm
662[ 0.763320 / 01-01 00:00:00.759][0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
663[ 0.763367 / 01-01 00:00:00.759][0] usbcore: registered new interface driver cdc_wdm
664[ 0.763420 / 01-01 00:00:00.759][0] usbcore: registered new interface driver usb-storage
665[ 0.763457 / 01-01 00:00:00.759][0] usbcore: registered new interface driver ums-alauda
666[ 0.763496 / 01-01 00:00:00.759][0] usbcore: registered new interface driver ums-cypress
667[ 0.763533 / 01-01 00:00:00.759][0] usbcore: registered new interface driver ums-datafab
668[ 0.763570 / 01-01 00:00:00.759][0] usbcore: registered new interface driver ums-freecom
669[ 0.763607 / 01-01 00:00:00.759][0] usbcore: registered new interface driver ums-isd200
670[ 0.763644 / 01-01 00:00:00.759][0] usbcore: registered new interface driver ums-jumpshot
671[ 0.763680 / 01-01 00:00:00.759][0] usbcore: registered new interface driver ums-karma
672[ 0.763716 / 01-01 00:00:00.759][0] usbcore: registered new interface driver ums-onetouch
673[ 0.763767 / 01-01 00:00:00.759][0] usbcore: registered new interface driver ums-realtek
674[ 0.763804 / 01-01 00:00:00.759][0] usbcore: registered new interface driver ums-sddr09
675[ 0.763841 / 01-01 00:00:00.759][0] usbcore: registered new interface driver ums-sddr55
676[ 0.763878 / 01-01 00:00:00.759][0] usbcore: registered new interface driver ums-usbat
677[ 0.763958 / 01-01 00:00:00.759][0] usbcore: registered new interface driver usbserial
678[ 0.763992 / 01-01 00:00:00.759][0] usbcore: registered new interface driver usbserial_generic
679[ 0.764021 / 01-01 00:00:00.759][0] usbserial: USB Serial support registered for generic
680[ 0.764059 / 01-01 00:00:00.759][0] usbcore: registered new interface driver ftdi_sio
681[ 0.764087 / 01-01 00:00:00.759][0] usbserial: USB Serial support registered for FTDI USB Serial Device
682[ 0.764125 / 01-01 00:00:00.759][0] usbcore: registered new interface driver pl2303
683[ 0.764153 / 01-01 00:00:00.759][0] usbserial: USB Serial support registered for pl2303
684[ 0.764695 / 01-01 00:00:00.759][2] gbridge_init: gbridge_init successs.
685[ 0.765263 / 01-01 00:00:00.759][2] u_lgeusb init
686[ 0.765730 / 01-01 00:00:00.759][2] mousedev: PS/2 mouse device common for all mice
687[ 0.765904 / 01-01 00:00:00.759][2] usbcore: registered new interface driver iforce
688[ 0.765958 / 01-01 00:00:00.759][2] usbcore: registered new interface driver xpad
689[ 0.766002 / 01-01 00:00:00.759][2] usbcore: registered new interface driver usb_acecad
690[ 0.766048 / 01-01 00:00:00.759][2] usbcore: registered new interface driver aiptek
691[ 0.766091 / 01-01 00:00:00.759][2] usbcore: registered new interface driver gtco
692[ 0.766135 / 01-01 00:00:00.759][2] usbcore: registered new interface driver hanwang
693[ 0.766179 / 01-01 00:00:00.759][2] usbcore: registered new interface driver kbtab
694[ 0.766599 / 01-01 00:00:00.759][2] [Touch] touch_device_init func
695[ 0.766609 / 01-01 00:00:00.759][2] [Touch] lg4894_get_device_type [lge_get_panel_type] = [22]
696[ 0.766618 / 01-01 00:00:00.759][2] [Touch] touch_device_init, lg4894 returned
697[ 0.766630 / 01-01 00:00:00.759][2] [Touch] touch_device_init func
698[ 0.766640 / 01-01 00:00:00.759][2] [Touch] ft8006m_get_device_type [lge_get_panel_type] = [22]
699[ 0.766648 / 01-01 00:00:00.759][2] [Touch] This panel is FT8006M
700[ 0.766656 / 01-01 00:00:00.759][2] [Touch] FT8006M__[touch_device_init] touch_bus_device_init
701[ 0.766826 / 01-01 00:00:00.759][2] [Touch] i2c slave address : 38
702[ 0.766836 / 01-01 00:00:00.759][2] [Touch] touch_i2c_probe
703[ 0.766836 / 01-01 00:00:00.759][2] , platform ptr = (null)
704[ 0.766852 / 01-01 00:00:00.759][2] [Touch] platform device register
705[ 0.767000 / 01-01 00:00:00.759][2] [Touch] start dev.of_node
706[ 0.767034 / 01-01 00:00:00.759][2] [Touch] fw_image - 0:touch/cv1/focaltech/FT8006_Pramboot_V0.3_20160922.img
707[ 0.767043 / 01-01 00:00:00.759][2] [Touch] fw_image - 1:touch/cv1/focaltech/LGECV1_TM_FT8006M_VID0x8d_PID0x01_5P0_V0x8A_L0x06_20171102_all.bin
708[ 0.767053 / 01-01 00:00:00.759][2] [Touch] fw_image - 2:touch/cv1/focaltech/LGECV1_TCL_FT8006M_VID0x3b_PID0x01_5P0_V0x8B_L0x05_20171120_all.bin
709[ 0.767064 / 01-01 00:00:00.759][2] [Touch] end dev.of_node
710[ 0.767074 / 01-01 00:00:00.759][2] [Touch] touch_set_device, data:edb35010
711[ 0.767084 / 01-01 00:00:00.759][2] [Touch] touch_gpio_init - pin:64, name:touch_reset
712[ 0.767099 / 01-01 00:00:00.759][2] [Touch] touch_gpio_direction_output - pin:64, value:0
713[ 0.767111 / 01-01 00:00:00.759][2] [Touch] touch_gpio_init - pin:65, name:touch_int
714[ 0.767122 / 01-01 00:00:00.759][2] [Touch] touch_gpio_direction_input - pin:65
715[ 0.767132 / 01-01 00:00:00.759][2] [Touch] touch_gpio_init - pin:-2, name:touch_make_id
716[ 0.767141 / 01-01 00:00:00.759][2] [Touch] touch_gpio_direction_input - pin:-2
717[ 0.767169 / 01-01 00:00:00.759][2] 3-0038 supply vdd not found, using dummy regulator
718[ 0.767212 / 01-01 00:00:00.759][2] 3-0038 supply vio not found, using dummy regulator
719[ 0.767422 / 01-01 00:00:00.759][2] [Touch] pinctrl set active
720[ 0.767519 / 01-01 00:00:00.759][2] fts:fts_create_sysfs() - sysfs_create_group() succeeded.
721[ 0.767543 / 01-01 00:00:00.759][2] lge_touch 3-0038: [FTS] Create proc entry success!
722[ 0.767553 / 01-01 00:00:00.759][2] [Touch] ft8006m_power, off
723[ 0.767562 / 01-01 00:00:00.759][2] [Touch] touch_gpio_direction_output - pin:64, value:0
724[ 0.772595 / 01-01 00:00:00.769][2] [Touch] ft8006m_power, on
725[ 0.772605 / 01-01 00:00:00.769][2] [Touch] touch_gpio_direction_output - pin:64, value:1
726[ 1.080162 / 01-01 00:00:01.079][2] [Touch] touch_init_input 720-1280-255-15-15-1-10
727[ 1.080299 / 01-01 00:00:01.079][2] input: touch_dev as /devices/virtual/input/input1
728[ 1.080477 / 01-01 00:00:01.079][2] [Touch] ft8006m_notify_normal event=0x3
729[ 1.080488 / 01-01 00:00:01.079][2] [Touch E] [ft8006m_notify_normal 1214] 3 is not supported
730[ 1.080669 / 01-01 00:00:01.079][2] [Touch] ft8006m_prd_attr_delta_init
731[ 1.080682 / 01-01 00:00:01.079][2] [Touch] ft8006m_prd_attr_delta_init font_buffer(8192 KB) malloc success
732[ 1.080693 / 01-01 00:00:01.079][2] [Touch] ft8006m_prd_attr_delta_init success
733[ 1.080702 / 01-01 00:00:01.079][2] [Touch] ft8006m_prd_attr_rawdata_init
734[ 1.080716 / 01-01 00:00:01.079][2] [Touch] ft8006m_prd_attr_rawdata_init font_buffer(10239 KB) malloc success
735[ 1.080728 / 01-01 00:00:01.079][2] [Touch] ft8006m_prd_attr_rawdata_init success
736[ 1.080736 / 01-01 00:00:01.079][2] [Touch] hw_reset_delay : 300 ms
737[ 1.080749 / 01-01 00:00:01.079][2] drv probe : 766 lge_touch_driver 313
738[ 1.080760 / 01-01 00:00:01.079][2] [Touch] platform device registered ...
739[ 1.080771 / 01-01 00:00:01.079][2] bus probe : 766 lge_touch 313
740[ 1.081592 / 01-01 00:00:01.079][2] qcom,qpnp-rtc qpnp-rtc-7: rtc core: registered qpnp_rtc as rtc0
741[ 1.081743 / 01-01 00:00:01.079][2] i2c /dev entries driver
742[ 1.085494 / 01-01 00:00:01.079][2] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
743[ 1.085889 / 01-01 00:00:01.079][2] CAM-SMMU cam_populate_smmu_context_banks:1586 Invalid pointer of ctx : vfe_secure rc = -517
744[ 1.085900 / 01-01 00:00:01.079][2] CAM-SMMU cam_smmu_probe:1636 Error: populating context banks
745[ 1.085916 / 01-01 00:00:01.079][2] msm_cam_smmu: probe of soc:qcom,cam_smmu:msm_cam_smmu_cb2 failed with error -12
746[ 1.085965 / 01-01 00:00:01.079][2] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
747[ 1.086180 / 01-01 00:00:01.079][2] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
748[ 1.086910 / 01-01 00:00:01.079][2] CAM-SMMU cam_populate_smmu_context_banks:1586 Invalid pointer of ctx : vfe_secure rc = -517
749[ 1.086920 / 01-01 00:00:01.079][2] CAM-SMMU cam_smmu_probe:1636 Error: populating context banks
750[ 1.086934 / 01-01 00:00:01.079][2] msm_cam_smmu: probe of soc:qcom,cam_smmu:msm_cam_smmu_cb2 failed with error -12
751[ 1.088782 / 01-01 00:00:01.079][2] msm_camera_get_dt_vreg_data:1133 number of entries is 0 or not present in dts
752[ 1.090296 / 01-01 00:00:01.089][2] msm_camera_get_dt_vreg_data:1133 number of entries is 0 or not present in dts
753[ 1.091429 / 01-01 00:00:01.089][2] msm_camera_get_dt_vreg_data:1133 number of entries is 0 or not present in dts
754[ 1.093974 / 01-01 00:00:01.089][2] msm_camera_get_dt_vreg_data:1133 number of entries is 0 or not present in dts
755[ 1.095234 / 01-01 00:00:01.089][2] msm_camera_get_dt_vreg_data:1133 number of entries is 0 or not present in dts
756[ 1.096485 / 01-01 00:00:01.089][2] msm_camera_get_dt_vreg_data:1133 number of entries is 0 or not present in dts
757[ 1.097348 / 01-01 00:00:01.089][2] msm_camera_pinctrl_init:1295 Getting pinctrl handle failed
758[ 1.097953 / 01-01 00:00:01.089][2] msm_eeprom_platform_probe failed 1704
759[ 1.104431 / 01-01 00:00:01.099][2] ------------[ cut here ]------------
760[ 1.104453 / 01-01 00:00:01.099][2] WARNING: CPU: 2 PID: 1 at /data001/jenkins/SBS9001/recovery/cv1_lao_com_mpcs_232436/android/kernel/msm-3.18/drivers/clk/msm/clock-local2.c:233 rcg_clk_enable+0x34/0x98()
761[ 1.104463 / 01-01 00:00:01.099][2] Attempting to prepare camss_top_ahb_clk_src before setting its rate. Set the rate first!
762[ 1.104472 / 01-01 00:00:01.099][0] Modules linked in:
763[ 1.104484 / 01-01 00:00:01.099][2] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.18.31-perf-ge966d00 #1
764[ 1.104507 / 01-01 00:00:01.099][2] [<c010cd9c>] (unwind_backtrace) from [<c0109a2c>] (show_stack+0x10/0x14)
765[ 1.104523 / 01-01 00:00:01.099][2] [<c0109a2c>] (show_stack) from [<c0dd2710>] (dump_stack+0x84/0xa4)
766[ 1.104538 / 01-01 00:00:01.099][2] [<c0dd2710>] (dump_stack) from [<c01244cc>] (warn_slowpath_common+0x64/0x88)
767[ 1.104553 / 01-01 00:00:01.099][2] [<c01244cc>] (warn_slowpath_common) from [<c012451c>] (warn_slowpath_fmt+0x2c/0x3c)
768[ 1.104567 / 01-01 00:00:01.099][2] [<c012451c>] (warn_slowpath_fmt) from [<c0aec0dc>] (rcg_clk_enable+0x34/0x98)
769[ 1.104582 / 01-01 00:00:01.099][2] [<c0aec0dc>] (rcg_clk_enable) from [<c0ae8e70>] (clk_enable+0x130/0x1b0)
770[ 1.104595 / 01-01 00:00:01.099][2] [<c0ae8e70>] (clk_enable) from [<c0ae8dc0>] (clk_enable+0x80/0x1b0)
771[ 1.104610 / 01-01 00:00:01.099][2] [<c0ae8dc0>] (clk_enable) from [<c0741fe4>] (msm_camera_clk_enable+0xe8/0x1d8)
772[ 1.104626 / 01-01 00:00:01.099][2] [<c0741fe4>] (msm_camera_clk_enable) from [<c076116c>] (cpp_init_hardware+0xa0/0x468)
773[ 1.104641 / 01-01 00:00:01.099][2] [<c076116c>] (cpp_init_hardware) from [<c0761820>] (cpp_probe+0x2ec/0x63c)
774[ 1.104656 / 01-01 00:00:01.099][2] [<c0761820>] (cpp_probe) from [<c05294c8>] (platform_drv_probe+0x30/0x78)
775[ 1.104672 / 01-01 00:00:01.099][2] [<c05294c8>] (platform_drv_probe) from [<c0527a88>] (driver_probe_device+0x288/0x554)
776[ 1.104686 / 01-01 00:00:01.099][2] [<c0527a88>] (driver_probe_device) from [<c0527e00>] (__driver_attach+0x68/0x8c)
777[ 1.104700 / 01-01 00:00:01.099][2] [<c0527e00>] (__driver_attach) from [<c0526130>] (bus_for_each_dev+0x70/0x84)
778[ 1.104714 / 01-01 00:00:01.099][2] [<c0526130>] (bus_for_each_dev) from [<c05270d8>] (bus_add_driver+0xdc/0x1cc)
779[ 1.104727 / 01-01 00:00:01.099][2] [<c05270d8>] (bus_add_driver) from [<c052871c>] (driver_register+0x9c/0xe0)
780[ 1.104741 / 01-01 00:00:01.099][2] [<c052871c>] (driver_register) from [<c0100968>] (do_one_initcall+0x188/0x1c4)
781[ 1.104756 / 01-01 00:00:01.099][2] [<c0100968>] (do_one_initcall) from [<c1600da4>] (kernel_init_freeable+0x108/0x1cc)
782[ 1.104772 / 01-01 00:00:01.099][2] [<c1600da4>] (kernel_init_freeable) from [<c0dcabec>] (kernel_init+0x8/0xe8)
783[ 1.104786 / 01-01 00:00:01.099][2] [<c0dcabec>] (kernel_init) from [<c0105fc0>] (ret_from_fork+0x14/0x34)
784[ 1.104818 / 01-01 00:00:01.099][2] ---[ end trace 2c085d6872dbf238 ]---
785[ 1.104848 / 01-01 00:00:01.099][2] MSM-CPP cpp_init_hardware:869 CPP HW Version: 0x40030004
786[ 1.104860 / 01-01 00:00:01.099][2] MSM-CPP cpp_init_hardware:887 stream_cnt:0
787[ 1.106777 / 01-01 00:00:01.099][2] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
788[ 1.106790 / 01-01 00:00:01.099][2] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
789[ 1.108388 / 01-01 00:00:01.099][2] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
790[ 1.108400 / 01-01 00:00:01.099][2] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
791[ 1.118646 / 01-01 00:00:01.109][0] __msm_jpeg_init:1537] Jpeg Device id 0
792[ 1.120424 / 01-01 00:00:01.119][2] usbcore: registered new interface driver uvcvideo
793[ 1.120437 / 01-01 00:00:01.119][2] USB Video Class driver (1.1.1)
794[ 1.121090 / 01-01 00:00:01.119][2] lge_battery_id soc:lge,battery-id: LGE Battery ID Checker started
795[ 1.121103 / 01-01 00:00:01.119][2] [FG_EST] battery num 8
796[ 1.121112 / 01-01 00:00:01.119][2] [FG_EST] battery array 1 index = [0] id = [0]
797[ 1.121121 / 01-01 00:00:01.119][2] [FG_EST] battery array 1 index = [1] id = [1]
798[ 1.121129 / 01-01 00:00:01.119][2] [FG_EST] battery array 1 index = [2] id = [110]
799[ 1.121138 / 01-01 00:00:01.119][2] [FG_EST] battery array 1 index = [3] id = [115]
800[ 1.121146 / 01-01 00:00:01.119][2] [FG_EST] battery array 1 index = [4] id = [120]
801[ 1.121155 / 01-01 00:00:01.119][2] [FG_EST] battery array 1 index = [5] id = [130]
802[ 1.121163 / 01-01 00:00:01.119][2] [FG_EST] battery array 1 index = [6] id = [187]
803[ 1.121172 / 01-01 00:00:01.119][2] [FG_EST] battery array 1 index = [7] id = [204]
804[ 1.121183 / 01-01 00:00:01.119][2] [FG_EST] battery cell type [LGE_BL45F1F_LGC_2500mAh]
805[ 1.121191 / 01-01 00:00:01.119][2] [FG_EST] battery cell type [LGE_BL45F1F_LGC_2500mAh]
806[ 1.121199 / 01-01 00:00:01.119][2] [FG_EST] battery cell type [LGE_BL45F1F_BYD_2500mAh]
807[ 1.121208 / 01-01 00:00:01.119][2] [FG_EST] battery cell type [LGE_BL45F1F_LGC_2500mAh]
808[ 1.121216 / 01-01 00:00:01.119][2] [FG_EST] battery cell type [LGE_BL45F1F_Tocad_2500mAh]
809[ 1.121224 / 01-01 00:00:01.119][2] [FG_EST] battery cell type [LGE_BL45F1F_BYD_2500mAh]
810[ 1.121233 / 01-01 00:00:01.119][2] [FG_EST] battery cell type [LGE_BL45F1F_LGC_2500mAh]
811[ 1.121241 / 01-01 00:00:01.119][2] [FG_EST] battery cell type [LGE_BL45F1F_Tocad_2500mAh]
812[ 1.121259 / 01-01 00:00:01.119][2] Battery was read in sbl is = 130
813[ 1.121777 / 01-01 00:00:01.119][2] FG: fg_of_init: battery aging mode: 2
814[ 1.121793 / 01-01 00:00:01.119][2] FG: fg_of_init: Using external sense
815[ 1.121807 / 01-01 00:00:01.119][2] FG: fg_of_init: lge_rid_disable : 0
816[ 1.121830 / 01-01 00:00:01.119][2] FG: fg_of_init: slope-limiter, temp: 100 coeffs: [14 6 14 6]
817[ 1.121855 / 01-01 00:00:01.119][2] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:7 MedC_Gain:5 HighC_Gain: 5
818[ 1.121865 / 01-01 00:00:01.119][2] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:15 MedC_Gain:4 HighC_Gain: 5
819[ 1.121874 / 01-01 00:00:01.119][2] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:20 MedC_Gain:4 HighC_Gain: 4
820[ 1.121895 / 01-01 00:00:01.119][2] FG: fg_of_init: batt-temp-low_limit: -600 batt-temp-high_limit: 1500
821[ 1.121905 / 01-01 00:00:01.119][2] FG: fg_of_init: cc-soc-limit-pct: 120
822[ 1.121926 / 01-01 00:00:01.119][2] FG: fg_of_init: slope-limiter, temp: 100 coeffs: [14 6 14 6]
823[ 1.121952 / 01-01 00:00:01.119][2] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:7 MedC_Gain:5 HighC_Gain: 5
824[ 1.121961 / 01-01 00:00:01.119][2] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:15 MedC_Gain:4 HighC_Gain: 5
825[ 1.121971 / 01-01 00:00:01.119][2] FG: fg_dischg_gain_dt_init: [FG_EST]:SOC:20 MedC_Gain:4 HighC_Gain: 4
826[ 1.121986 / 01-01 00:00:01.119][2] FG: fg_of_init: batt-temp-low_limit: -600 batt-temp-high_limit: 1500
827[ 1.121996 / 01-01 00:00:01.119][2] FG: fg_of_init: cc-soc-limit-pct: 120
828[ 1.122008 / 01-01 00:00:01.119][2] FG: fg_of_init: restore: 0 validate_by_ocv: 0 range_pct: 0
829[ 1.122690 / 01-01 00:00:01.119][2] FG: fg_age_detection: battery age not init
830[ 1.123018 / 01-01 00:00:01.119][2] FG: fg_age_detection: battery age not init
831[ 1.123108 / 01-01 00:00:01.119][0] FG: fg_probe: rbias software control : 0
832[ 1.123122 / 01-01 00:00:01.119][2] FG: update_iterm: current = -200, converted_raw = fae2, data = e2 fa
833[ 1.123181 / 01-01 00:00:01.119][2] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=64
834[ 1.123254 / 01-01 00:00:01.119][2] FG: fg_age_detection: battery age not init
835[ 1.123268 / 01-01 00:00:01.119][2] FG: fg_batt_print_work: [FG_INFO]:RS=0x0, BS=0, QS=0, SOC=50, Rem=0, Voltage=0mV,OCV=0mV, Current=0mA, Temp=20, Age=1, cycle=0
836[ 1.123397 / 01-01 00:00:01.119][2] FG: update_cutoff_voltage: voltage = 3200, converted_raw = 51eb, data = eb 51
837[ 1.123524 / 01-01 00:00:01.119][1] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@200f000/qcom,pmi8940@2/qcom,qpnp-smbcharger IO resource absent!
838[ 1.123630 / 01-01 00:00:01.119][1] SMBCHG: smbchg_check_chg_version: pmic=PMI8940, wa_flags=0xe, hvdcp_supported=false
839[ 1.123657 / 01-01 00:00:01.119][1] LGE charging scenario V2 setting otp_limit to w:450 c:450
840[ 1.123678 / 01-01 00:00:01.119][1] SMBCHG: smb_parse_dt: parallel usb thr: -22, 9v thr: -22
841[ 1.123700 / 01-01 00:00:01.119][1] SMBCHG: smb_parse_dt: soc recharging is enabled
842[ 1.123732 / 01-01 00:00:01.119][1] SMBCHG: smb_parse_dt: carrier matched : COMMON
843[ 1.123833 / 01-01 00:00:01.119][1] smbcharger_charger_otg: no parameters
844[ 1.123925 / 01-01 00:00:01.119][1] SMBCHG: smbchg_hw_init: Charger Revision DIG: 0.0; ANA: 0.1
845[ 1.123936 / 01-01 00:00:01.119][1] vote-SMBCHG: hvdcp_enable: client 0 voting for 0 - on
846[ 1.123946 / 01-01 00:00:01.119][1] vote-SMBCHG: hvdcp_enable: effective vote is now 0 voted by client 0
847[ 1.123955 / 01-01 00:00:01.119][1] SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb enable 0 last_enable 0
848[ 1.124022 / 01-01 00:00:01.119][1] SMBCHG: smbchg_set_aicl_rerun_period_s: aicl rerun period set to 180s
849[ 1.124401 / 01-01 00:00:01.119][2] FG: fg_set_resume_soc: [FG_INFO]set recharging soc = 245
850[ 1.124643 / 01-01 00:00:01.119][1] vote-SMBCHG: battchg_suspend: client 1 voting for 0 - on
851[ 1.124753 / 01-01 00:00:01.119][1] SMBCHG: smbchg_hw_init: set vfloat to 4400
852[ 1.124823 / 01-01 00:00:01.119][1] SMBCHG: smbchg_iterm_set: set tcc (100) to 0x02
853[ 1.124995 / 01-01 00:00:01.119][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
854[ 1.125038 / 01-01 00:00:01.119][1] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
855[ 1.125152 / 01-01 00:00:01.119][1] FG: fg_config_esr_extract: ESR extract already enabled
856[ 1.125163 / 01-01 00:00:01.119][1] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
857[ 1.125176 / 01-01 00:00:01.119][2] FG: set_prop_sense_type: [FG_OPTION]sensor type = 1
858[ 1.125185 / 01-01 00:00:01.119][1] vote-SMBCHG: usb_suspend: client 0 voting for 0 - off
859[ 1.125225 / 01-01 00:00:01.119][1] vote-SMBCHG: dc_suspend: client 0 voting for 0 - off
860[ 1.125239 / 01-01 00:00:01.119][1] SMBCHG: smbchg_usb_update_online_work: setting usb psy online = 0
861[ 1.125476 / 01-01 00:00:01.119][1] vote-SMBCHG: fcc: client 1 voting for 900 - on
862[ 1.125486 / 01-01 00:00:01.119][1] vote-SMBCHG: fcc: effective vote is now 900 voted by client 1
863[ 1.125551 / 01-01 00:00:01.119][1] SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 900, set to 900
864[ 1.125622 / 01-01 00:00:01.119][1] vote-SMBCHG: hwaicl_enable_indirect: client 0 voting for 0 - on
865[ 1.125633 / 01-01 00:00:01.119][1] vote-SMBCHG: hwaicl_disable: client 0 voting for 0 - off
866[ 1.125903 / 01-01 00:00:01.119][1] SMBCHG: smbchg_hw_init: Initial VFLOAT_TRIM reg = 0x2d
867[ 1.125927 / 01-01 00:00:01.119][1] SMBCHG: batt_pres_handler: triggered: 0x00
868[ 1.125937 / 01-01 00:00:01.119][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
869[ 1.125998 / 01-01 00:00:01.119][1] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
870[ 1.126112 / 01-01 00:00:01.119][1] FG: fg_config_esr_extract: ESR extract already enabled
871[ 1.126122 / 01-01 00:00:01.119][1] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
872[ 1.126164 / 01-01 00:00:01.119][1] SMBCHG: batt_hot_handler: triggered: 0x00
873[ 1.126174 / 01-01 00:00:01.119][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
874[ 1.126207 / 01-01 00:00:01.119][1] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
875[ 1.126307 / 01-01 00:00:01.119][1] FG: fg_config_esr_extract: ESR extract already enabled
876[ 1.126317 / 01-01 00:00:01.119][1] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
877[ 1.126369 / 01-01 00:00:01.119][1] SMBCHG: batt_warm_handler: triggered: 0x00
878[ 1.126407 / 01-01 00:00:01.119][1] SMBCHG: batt_cool_handler: triggered: 0x00
879[ 1.126436 / 01-01 00:00:01.119][1] SMBCHG: batt_cold_handler: triggered: 0x00
880[ 1.126446 / 01-01 00:00:01.119][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
881[ 1.126484 / 01-01 00:00:01.119][1] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
882[ 1.126573 / 01-01 00:00:01.119][1] FG: fg_config_esr_extract: ESR extract already enabled
883[ 1.126583 / 01-01 00:00:01.119][1] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
884[ 1.126604 / 01-01 00:00:01.119][1] SMBCHG: usbid_change_handler: triggered
885[ 1.126643 / 01-01 00:00:01.119][1] SMBCHG: usbid_change_handler: setting usb psy OTG = 0
886[ 1.126727 / 01-01 00:00:01.119][0] msm_otg 78db000.usb: ID status_w
887[ 1.126737 / 01-01 00:00:01.119][0] ID set
888[ 1.126792 / 01-01 00:00:01.119][1] FG: fg_config_esr_extract: ESR extract already enabled
889[ 1.126794 / 01-01 00:00:01.119][1] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
890[ 1.126853 / 01-01 00:00:01.119][1] SMBCHG: determine_initial_status: setting usb psy dp=f dm=f
891[ 1.126882 / 01-01 00:00:01.119][1] SMBCHG: handle_usb_insertion: triggered
892[ 1.127040 / 01-01 00:00:01.119][0] SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
893[ 1.127053 / 01-01 00:00:01.119][1] SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
894[ 1.127064 / 01-01 00:00:01.119][1] vote-SMBCHG: usb_icl: client 0 voting for 100 - on
895[ 1.127074 / 01-01 00:00:01.119][1] vote-SMBCHG: usb_icl: effective vote is now 100 voted by client 0
896[ 1.127083 / 01-01 00:00:01.119][1] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
897[ 1.127093 / 01-01 00:00:01.119][1] vote-SMBCHG: usb_suspend: client 2 voting for 0 - off
898[ 1.127165 / 01-01 00:00:01.119][1] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 150 mA
899[ 1.127380 / 01-01 00:00:01.119][1] SMBCHG: handle_usb_insertion: setting usb psy present = 1
900[ 1.127465 / 01-01 00:00:01.119][1] msm_otg 78db000.usb: Unable to get qpnp adc
901[ 1.127483 / 01-01 00:00:01.119][1] SMBCHG: handle_usb_insertion: setting usb psy health GOOD
902[ 1.127574 / 01-01 00:00:01.119][1] SMBCHG: smbchg_usb_update_online_work: setting usb psy online = 1
903[ 1.128080 / 01-01 00:00:01.119][1] FG: fg_age_detection: battery age not init
904[ 1.128110 / 01-01 00:00:01.119][1] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19520719, ocv=-22, ibat=477990, rbatt=99978
905[ 1.128136 / 01-01 00:00:01.119][1] SMBCHG: smbchg_get_time_to_full: TTF supply not found
906[ 1.129069 / 01-01 00:00:01.119][0] FG: fg_age_detection: battery age not init
907[ 1.129134 / 01-01 00:00:01.119][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19520719, ocv=-22, ibat=477990, rbatt=99978
908[ 1.129160 / 01-01 00:00:01.119][0] SMBCHG: smbchg_get_time_to_full: TTF supply not found
909[ 1.133091 / 01-01 00:00:01.129][2] FG: fg_common_hw_init: ESR extract is enabled
910[ 1.133425 / 01-01 00:00:01.129][2] FG: fg_common_hw_init: imptr_pulse_slow is enabled
911[ 1.133740 / 01-01 00:00:01.129][3] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@200f000/qcom,pmi8940@2/qcom,qpnp-smbcharger IO resource absent!
912[ 1.133743 / 01-01 00:00:01.129][2] FG: fg_common_hw_init: rslow_comp active is disabled
913[ 1.133834 / 01-01 00:00:01.129][3] ------------[ cut here ]------------
914[ 1.133852 / 01-01 00:00:01.129][3] WARNING: CPU: 3 PID: 1 at /data001/jenkins/SBS9001/recovery/cv1_lao_com_mpcs_232436/android/kernel/msm-3.18/drivers/base/core.c:548 device_create_file+0x68/0x90()
915[ 1.133861 / 01-01 00:00:01.129][3] Attribute chgstep: write permission without 'store'
916[ 1.133870 / 01-01 00:00:01.129][0] Modules linked in:
917[ 1.133883 / 01-01 00:00:01.129][3] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-perf-ge966d00 #1
918[ 1.133905 / 01-01 00:00:01.129][3] [<c010cd9c>] (unwind_backtrace) from [<c0109a2c>] (show_stack+0x10/0x14)
919[ 1.133921 / 01-01 00:00:01.129][3] [<c0109a2c>] (show_stack) from [<c0dd2710>] (dump_stack+0x84/0xa4)
920[ 1.133937 / 01-01 00:00:01.129][3] [<c0dd2710>] (dump_stack) from [<c01244cc>] (warn_slowpath_common+0x64/0x88)
921[ 1.133951 / 01-01 00:00:01.129][3] [<c01244cc>] (warn_slowpath_common) from [<c012451c>] (warn_slowpath_fmt+0x2c/0x3c)
922[ 1.133965 / 01-01 00:00:01.129][3] [<c012451c>] (warn_slowpath_fmt) from [<c0523e44>] (device_create_file+0x68/0x90)
923[ 1.133981 / 01-01 00:00:01.129][3] [<c0523e44>] (device_create_file) from [<c07c5414>] (smbchg_probe+0x1f54/0x27d0)
924[ 1.133997 / 01-01 00:00:01.129][3] [<c07c5414>] (smbchg_probe) from [<c0a72be4>] (spmi_drv_probe+0x10/0x14)
925[ 1.134013 / 01-01 00:00:01.129][3] [<c0a72be4>] (spmi_drv_probe) from [<c0527a88>] (driver_probe_device+0x288/0x554)
926[ 1.134028 / 01-01 00:00:01.129][3] [<c0527a88>] (driver_probe_device) from [<c0527e00>] (__driver_attach+0x68/0x8c)
927[ 1.134042 / 01-01 00:00:01.129][3] [<c0527e00>] (__driver_attach) from [<c0526130>] (bus_for_each_dev+0x70/0x84)
928[ 1.134056 / 01-01 00:00:01.129][3] [<c0526130>] (bus_for_each_dev) from [<c05270d8>] (bus_add_driver+0xdc/0x1cc)
929[ 1.134064 / 01-01 00:00:01.129][2] FG: fg_common_hw_init: rslow_comp active is disabled
930[ 1.134078 / 01-01 00:00:01.129][3] [<c05270d8>] (bus_add_driver) from [<c052871c>] (driver_register+0x9c/0xe0)
931[ 1.134092 / 01-01 00:00:01.129][3] [<c052871c>] (driver_register) from [<c0100968>] (do_one_initcall+0x188/0x1c4)
932[ 1.134107 / 01-01 00:00:01.129][3] [<c0100968>] (do_one_initcall) from [<c1600da4>] (kernel_init_freeable+0x108/0x1cc)
933[ 1.134123 / 01-01 00:00:01.129][3] [<c1600da4>] (kernel_init_freeable) from [<c0dcabec>] (kernel_init+0x8/0xe8)
934[ 1.134138 / 01-01 00:00:01.129][3] [<c0dcabec>] (kernel_init) from [<c0105fc0>] (ret_from_fork+0x14/0x34)
935[ 1.134149 / 01-01 00:00:01.129][3] ---[ end trace 2c085d6872dbf239 ]---
936[ 1.134162 / 01-01 00:00:01.129][3] SMBCHG: smbchg_probe: setting usb psy present = 1
937[ 1.134212 / 01-01 00:00:01.129][3] vote-SMBCHG: battchg_suspend: client 1 voting for 0 - on
938[ 1.134224 / 01-01 00:00:01.129][3] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
939[ 1.134274 / 01-01 00:00:01.129][3] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 0
940[ 1.134284 / 01-01 00:00:01.129][3] vote-SMBCHG: usb_icl: client 0 voting for 0 - on
941[ 1.134293 / 01-01 00:00:01.129][3] vote-SMBCHG: usb_icl: effective vote is now 0 voted by client 0
942[ 1.134303 / 01-01 00:00:01.129][3] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
943[ 1.134312 / 01-01 00:00:01.129][3] vote-SMBCHG: usb_suspend: client 2 voting for 0 - on
944[ 1.134340 / 01-01 00:00:01.129][3] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
945[ 1.134371 / 01-01 00:00:01.129][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
946[ 1.134386 / 01-01 00:00:01.129][1] SMBCHG: power_ok_handler: triggered: 0x00
947[ 1.134418 / 01-01 00:00:01.129][3] SMBCHG: smbchg_usb_update_online_work: Updating by force
948[ 1.134429 / 01-01 00:00:01.129][3] SMBCHG: smbchg_usb_update_online_work: setting usb psy online = 0
949[ 1.134458 / 01-01 00:00:01.129][3] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
950[ 1.134614 / 01-01 00:00:01.129][3] FG: fg_age_detection: battery age not init
951[ 1.134641 / 01-01 00:00:01.129][3] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19520719, ocv=-22, ibat=477990, rbatt=99978
952[ 1.134666 / 01-01 00:00:01.129][3] SMBCHG: smbchg_get_time_to_full: TTF supply not found
953[ 1.134757 / 01-01 00:00:01.129][3] vote-SMBCHG: battchg_suspend: client 1 voting for 0 - on
954[ 1.134766 / 01-01 00:00:01.129][3] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
955[ 1.134794 / 01-01 00:00:01.129][3] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 0
956[ 1.134804 / 01-01 00:00:01.129][3] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
957[ 1.134851 / 01-01 00:00:01.129][3] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
958[ 1.134960 / 01-01 00:00:01.129][3] FG: fg_age_detection: battery age not init
959[ 1.134983 / 01-01 00:00:01.129][3] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19520719, ocv=-22, ibat=477990, rbatt=99978
960[ 1.135007 / 01-01 00:00:01.129][3] SMBCHG: smbchg_get_time_to_full: TTF supply not found
961[ 1.135160 / 01-01 00:00:01.129][3] FG: fg_config_esr_extract: ESR extract already enabled
962[ 1.135753 / 01-01 00:00:01.129][3] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled
963[ 1.136217 / 01-01 00:00:01.129][3] carrier matched : COMMON
964[ 1.136359 / 01-01 00:00:01.129][3] SMBCHG: vadc_set_work: failed to initialize vadc
965[ 1.136379 / 01-01 00:00:01.129][3] qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=1
966[ 1.137134 / 01-01 00:00:01.129][3] unable to find DT imem DLOAD mode node
967[ 1.137447 / 01-01 00:00:01.129][3] unable to find DT imem EDLOAD mode node
968[ 1.138691 / 01-01 00:00:01.129][3] thermal thermal_zone2: failed to read out thermal zone 2
969[ 1.138886 / 01-01 00:00:01.129][3] thermal thermal_zone3: failed to read out thermal zone 3
970[ 1.139067 / 01-01 00:00:01.129][3] thermal thermal_zone4: failed to read out thermal zone 4
971[ 1.139230 / 01-01 00:00:01.129][3] thermal thermal_zone5: failed to read out thermal zone 5
972[ 1.159434 / 01-01 00:00:01.149][3] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
973[ 1.159525 / 01-01 00:00:01.149][3] device-mapper: req-crypt: dm-req-crypt successfully initalized.
974[ 1.159525 / 01-01 00:00:01.149][3]
975[ 1.160444 / 01-01 00:00:01.159][3] sdhci: Secure Digital Host Controller Interface driver
976[ 1.160454 / 01-01 00:00:01.159][3] sdhci: Copyright(c) Pierre Ossman
977[ 1.160468 / 01-01 00:00:01.159][3] sdhci-pltfm: SDHCI platform and OF driver helper
978[ 1.161118 / 01-01 00:00:01.159][3] qcom_ice_get_pdevice: found ice device ed267300
979[ 1.161129 / 01-01 00:00:01.159][3] qcom_ice_get_pdevice: matching platform device ed56be00
980[ 1.164200 / 01-01 00:00:01.159][3] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xf0670000
981[ 1.164524 / 01-01 00:00:01.159][3] sdhci_msm 7824900.sdhci: No vmmc regulator found
982[ 1.164535 / 01-01 00:00:01.159][3] sdhci_msm 7824900.sdhci: No vqmmc regulator found
983[ 1.164788 / 01-01 00:00:01.159][3] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA in CMDQ mode
984[ 1.210110 / 01-01 00:00:01.209][3] drv probe : 1160 sdhci_msm 49
985[ 1.210456 / 01-01 00:00:01.209][3] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
986[ 1.225416 / 01-01 00:00:01.219][3] sdhci_msm 7864900.sdhci: No vmmc regulator found
987[ 1.225431 / 01-01 00:00:01.219][3] sdhci_msm 7864900.sdhci: No vqmmc regulator found
988[ 1.225683 / 01-01 00:00:01.219][3] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA in legacy mode
989[ 1.269796 / 01-01 00:00:01.259][0] mmc0: Out-of-interrupt timeout is 50[ms]
990[ 1.269807 / 01-01 00:00:01.259][0] mmc0: BKOPS_EN equals 0x2
991[ 1.269816 / 01-01 00:00:01.259][0] mmc0: eMMC FW version: 0xa5
992[ 1.269825 / 01-01 00:00:01.259][0] mmc0: CMDQ supported: depth: 32
993[ 1.269834 / 01-01 00:00:01.259][0] mmc0: cache barrier support 1 flush policy 1
994[ 1.270182 / 01-01 00:00:01.269][3] drv probe : 1210 sdhci_msm 59
995[ 1.270528 / 01-01 00:00:01.269][3] qcom,leds-qpnp: probe of leds-qpnp-19 failed with error -10
996[ 1.272625 / 01-01 00:00:01.269][3] tz_log 8600720.tz-log: Hyp log service is not supported
997[ 1.273466 / 01-01 00:00:01.269][3] hidraw: raw HID events driver (C) Jiri Kosina
998[ 1.275586 / 01-01 00:00:01.269][3] usbcore: registered new interface driver usbhid
999[ 1.275595 / 01-01 00:00:01.269][3] usbhid: USB HID core driver
1000[ 1.275923 / 01-01 00:00:01.269][3] ashmem: initialized
1001[ 1.276453 / 01-01 00:00:01.269][3] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
1002[ 1.278631 / 01-01 00:00:01.269][2] mmc_get_wp_area: can not find the key value from boot cmd - androidboot.wp_addr_1
1003[ 1.278647 / 01-01 00:00:01.269][2] mmc_set_power_on_wp_user: no need to set up POWP
1004[ 1.278892 / 01-01 00:00:01.269][2] cmdq_host_alloc_tdl: desc_size: 512 data_sz: 126976 slot-sz: 16
1005[ 1.279092 / 01-01 00:00:01.269][2] desc-base: 0xf079a000 trans-base: 0xf0b5c000
1006[ 1.279092 / 01-01 00:00:01.269][2] desc_dma 0xfd879000 trans_dma: 0xfdb80000
1007[ 1.279117 / 01-01 00:00:01.269][2] mmc0: CMDQ enabled on card
1008[ 1.279131 / 01-01 00:00:01.269][2] mmc0: new HS400 MMC card at address 0001
1009[ 1.279141 / 01-01 00:00:01.269][2] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc0, type:MMC
1010[ 1.279215 / 01-01 00:00:01.269][3] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
1011[ 1.279472 / 01-01 00:00:01.269][2] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1 (0xc395be80)
1012[ 1.279622 / 01-01 00:00:01.269][2] mmcblk0: mmc0:0001 HAG4a2 14.6 GiB
1013[ 1.279726 / 01-01 00:00:01.269][2] mmcblk0rpmb: mmc0:0001 HAG4a2 partition 3 4.00 MiB
1014[ 1.281205 / 01-01 00:00:01.279][3] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
1015[ 1.281352 / 01-01 00:00:01.279][3] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
1016[ 1.281393 / 01-01 00:00:01.279][2] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 p62
1017[ 1.283528 / 01-01 00:00:01.279][3] Trustonic TEE: mobicore_init: MobiCore mcDrvModuleApi version is 3.1
1018[ 1.283722 / 01-01 00:00:01.279][3] Trustonic TEE: mobicore_probe: MobiCore t-base-QC-MSM8996-Android-310D-V002-20160729_145511_15496
1019[ 1.284700 / 01-01 00:00:01.279][3] usbcore: registered new interface driver snd-usb-audio
1020[ 1.284766 / 01-01 00:00:01.279][3] usbcore: registered new interface driver snd-ua101
1021[ 1.284829 / 01-01 00:00:01.279][3] usbcore: registered new interface driver snd-usb-caiaq
1022[ 1.284891 / 01-01 00:00:01.279][3] usbcore: registered new interface driver snd-usb-6fire
1023[ 1.286636 / 01-01 00:00:01.279][2] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
1024[ 1.297919 / 01-01 00:00:01.289][1] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
1025[ 1.303007 / 01-01 00:00:01.299][1] netem: version 1.3
1026[ 1.303036 / 01-01 00:00:01.299][1] u32 classifier
1027[ 1.303045 / 01-01 00:00:01.299][1] Actions configured
1028[ 1.303074 / 01-01 00:00:01.299][1] Netfilter messages via NETLINK v0.30.
1029[ 1.303118 / 01-01 00:00:01.299][1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1030[ 1.303423 / 01-01 00:00:01.299][1] ctnetlink v0.93: registering with nfnetlink.
1031[ 1.303922 / 01-01 00:00:01.299][1] xt_time: kernel timezone is -0000
1032[ 1.303949 / 01-01 00:00:01.299][1] 939-23012-001-quicksec-vpnclient-for-android-3.4-3478-b05f514d009c-3478
1033[ 1.303957 / 01-01 00:00:01.299][1] vpnclient kernel spd loaded.
1034[ 1.304234 / 01-01 00:00:01.299][1] ip_tables: (C) 2000-2006 Netfilter Core Team
1035[ 1.304364 / 01-01 00:00:01.299][1] arp_tables: (C) 2002 David S. Miller
1036[ 1.304410 / 01-01 00:00:01.299][1] TCP: bic registered
1037[ 1.304424 / 01-01 00:00:01.299][1] TCP: cubic registered
1038[ 1.304436 / 01-01 00:00:01.299][1] Initializing XFRM netlink socket
1039[ 1.304739 / 01-01 00:00:01.299][1] NET: Registered protocol family 10
1040[ 1.305585 / 01-01 00:00:01.299][0] mip6: Mobile IPv6
1041[ 1.305614 / 01-01 00:00:01.299][0] ip6_tables: (C) 2000-2006 Netfilter Core Team
1042[ 1.305767 / 01-01 00:00:01.299][0] sit: IPv6 over IPv4 tunneling driver
1043[ 1.306164 / 01-01 00:00:01.299][0] NET: Registered protocol family 17
1044[ 1.306189 / 01-01 00:00:01.299][0] NET: Registered protocol family 15
1045[ 1.306230 / 01-01 00:00:01.299][0] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1046[ 1.306253 / 01-01 00:00:01.299][0] Bridge firewalling registered
1047[ 1.306265 / 01-01 00:00:01.299][0] Ebtables v2.0 registered
1048[ 1.306381 / 01-01 00:00:01.299][0] Bluetooth: ee04beb0
1049[ 1.306395 / 01-01 00:00:01.299][1] Bluetooth: ee04beb0Bluetooth: ee04bec0
1050[ 1.306431 / 01-01 00:00:01.299][1] Bluetooth: ee04be98Bluetooth: ee04be98
1051[ 1.306448 / 01-01 00:00:01.299][1] Bluetooth: ee04be90Bluetooth: ee04bed0
1052[ 1.306467 / 01-01 00:00:01.299][1] Bluetooth: ee04bed0[ 1.306502 / 01-01 00:00:01.299][1] l2tp_core: L2TP core driver, V2.0
1053[ 1.306520 / 01-01 00:00:01.299][1] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1054[ 1.306532 / 01-01 00:00:01.299][1] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1055[ 1.306555 / 01-01 00:00:01.299][1] l2tp_netlink: L2TP netlink interface
1056[ 1.306582 / 01-01 00:00:01.299][1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1057[ 1.306601 / 01-01 00:00:01.299][1] l2tp_debugfs: L2TP debugfs support
1058[ 1.306613 / 01-01 00:00:01.299][1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1059[ 1.307311 / 01-01 00:00:01.299][1] NET: Registered protocol family 27
1060[ 1.311957 / 01-01 00:00:01.309][1] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
1061[ 1.313263 / 01-01 00:00:01.309][1] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id.
1062[ 1.313788 / 01-01 00:00:01.309][1] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
1063[ 1.315426 / 01-01 00:00:01.309][1] msm_otg 78db000.usb: phy_reset: success
1064[ 1.317558 / 01-01 00:00:01.309][0] Registering SWP/SWPB emulation handler
1065[ 1.317590 / 01-01 00:00:01.309][0] Creating CPU group 0
1066[ 1.317600 / 01-01 00:00:01.309][0] Init CPU0 state
1067[ 1.317608 / 01-01 00:00:01.309][0] Init CPU1 state
1068[ 1.317616 / 01-01 00:00:01.309][0] Init CPU2 state
1069[ 1.317624 / 01-01 00:00:01.309][0] Init CPU3 state
1070[ 1.318021 / 01-01 00:00:01.309][1] Loading compiled-in X.509 certificates
1071[ 1.321867 / 01-01 00:00:01.319][2] [LGE][MMC][mmc_read_ssr ( )] mmc_hostname:mmc1, 4 ==> SPEED_CLASS 10
1072[ 1.322202 / 01-01 00:00:01.319][1] Loaded X.509 cert 'Magrathea: Glacier signing key: aff1ea003500415ce656a10adfc5555a8a0335e6'
1073[ 1.323130 / 01-01 00:00:01.319][2] Key type encrypted registered
1074[ 1.327805 / 01-01 00:00:01.319][0] mmc1: sdhci_msm_execute_tuning: finally setting the tuning phase to 15
1075[ 1.327830 / 01-01 00:00:01.319][0] mmc1: new ultra high speed SDR104 SDXC card at address 0001
1076[ 1.327840 / 01-01 00:00:01.319][0] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc1, type:SDXC
1077[ 1.327998 / 01-01 00:00:01.319][1] time-to-full soc:lge,time-to-full: lge_time_to_full_probe : Start
1078[ 1.328385 / 01-01 00:00:01.319][0] TIME-TO-FULL: lge_time_to_full_dt_to_pdata: Default Profile Name : LGE_BL45F1F_LGC_2500mAh[ 1.328394 / 01-01 00:00:01.319][0] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1 (0xc3906d40)
1079
1080[ 1.328501 / 01-01 00:00:01.319][2] mmcblk1: mmc1:0001 00000 59.6 GiB
1081[ 1.328543 / 01-01 00:00:01.319][1] TIME-TO-FULL: lge_time_to_full_probe: Done
1082[ 1.328566 / 01-01 00:00:01.319][1] TIME-TO-FULL: ttf_power_get_property: Unsupported Property 0
1083[ 1.329195 / 01-01 00:00:01.319][1] power_sysfs_parse_dt : Total sysfs node is 68
1084[ 1.331902 / 01-01 00:00:01.329][1] power_sysfs_probe : Success Power sysfs Init
1085[ 1.332589 / 01-01 00:00:01.329][1] monitor-thermal soc:lge,monitor-thermal: LGE monitor thermal Initialized
1086[ 1.332830 / 01-01 00:00:01.329][2] mmcblk1: p1
1087[ 1.333160 / 01-01 00:00:01.329][2] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
1088[ 1.333410 / 01-01 00:00:01.329][0] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped.
1089[ 1.335463 / 01-01 00:00:01.329][0] RNDIS_IPA module is loaded.
1090[ 1.335846 / 01-01 00:00:01.329][0] usb_gadget_probe_driver
1091[ 1.335858 / 01-01 00:00:01.329][0] gadget name udc->gadget->name ci13xxx_msm
1092[ 1.335866 / 01-01 00:00:01.329][0]
1093********************************************
1094[ 1.335873 / 01-01 00:00:01.329][0]
1095[ 1.335873 / 01-01 00:00:01.329][0] No of UDCs: 1
1096 driver->function: android_usb
1097[ 1.335890 / 01-01 00:00:01.329][0]
1098[ 1.335890 / 01-01 00:00:01.329][0] ********************************************
1099 udc->gadget->usb_core_id : 0
1100[ 1.335908 / 01-01 00:00:01.329][0]
1101[ 1.335908 / 01-01 00:00:01.329][0] driver->usb_core_id: 0
1102[ 1.336111 / 01-01 00:00:01.329][0] file system registered
1103[ 1.336166 / 01-01 00:00:01.329][0] mbim_init: initialize 1 instances
1104[ 1.336227 / 01-01 00:00:01.329][0] mbim_init: Initialized 1 ports
1105[ 1.337545 / 01-01 00:00:01.329][2] rndis_qc_init: initialize rndis QC instance
1106[ 1.337776 / 01-01 00:00:01.329][2] Number of LUNs=8
1107[ 1.337788 / 01-01 00:00:01.329][2] Mass Storage Function, version: 2009/09/11
1108[ 1.337798 / 01-01 00:00:01.329][2] LUN: removable file: (no medium)
1109[ 1.337813 / 01-01 00:00:01.329][2] Number of LUNs=1
1110[ 1.337856 / 01-01 00:00:01.329][2] LUN: removable file: (no medium)
1111[ 1.337865 / 01-01 00:00:01.329][2] Number of LUNs=1
1112[ 1.338126 / 01-01 00:00:01.329][2] android_usb gadget: android_usb ready
1113[ 1.338139 / 01-01 00:00:01.329][2] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
1114[ 1.338157 / 01-01 00:00:01.329][2] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
1115[ 1.338169 / 01-01 00:00:01.329][2] udc->gadget->name: ci13xxx_msm
1116[ 1.339664 / 01-01 00:00:01.329][2] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input2
1117[ 1.340161 / 01-01 00:12:28.500][2] qcom,qpnp-rtc qpnp-rtc-7: setting system clock to 2018-01-01 00:12:28 UTC (1514765548)
1118[ 1.342564 / 01-01 00:12:28.500][2] [BOOT_CAUSE] 32, warm_reset = 0
1119[ 1.342579 / 01-01 00:12:28.500][2] [SMPL_CNT] ===> not smpl boot!!!!!
1120[ 1.344831 / 01-01 00:12:28.500][2] vts_probe: vts_probe start
1121[ 1.345180 / 01-01 00:12:28.500][2] vts_probe: xo_therm is registered. chan=50, weight=370, constant=4500
1122[ 1.345194 / 01-01 00:12:28.500][2] vts_probe: quiet_therm is registered. chan=19, weight=460, constant=4500
1123[ 1.345204 / 01-01 00:12:28.500][2] vts_probe: vts: Add 2 sensors for virtual temp sensor
1124[ 1.345214 / 01-01 00:12:28.500][2] vts_probe: vts: probe done.
1125[ 1.345539 / 01-01 00:12:28.500][2] gpio_keys_gpio_report_event: code(115) state(0)
1126[ 1.345782 / 01-01 00:12:28.500][2] parse_cpu_levels: idx 1 594
1127[ 1.348192 / 01-01 00:12:28.500][2] qcom,qpnp-flash-led qpnp-flash-led-21: Unable to acquire pinctrl
1128[ 1.353159 / 01-01 00:12:28.500][2] qcom,cc-debug-8952 1874000.qcom,cc-debug: Registered Debug Mux successfully
1129[ 1.358493 / 01-01 00:12:28.500][2] msm8952-asoc-wcd c051000.sound: default codec configured
1130[ 1.362522 / 01-01 00:12:28.509][2] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
1131[ 1.362553 / 01-01 00:12:28.509][2] msm8952-asoc-wcd c051000.sound: snd_soc_register_card deferred(-517)-retry
1132[ 1.363524 / 01-01 00:12:28.509][2] mem_acc_corner: disabling
1133[ 1.363548 / 01-01 00:12:28.509][2] clock_late_init: Removing enables held for handed-off clocks
1134[ 1.365911 / 01-01 00:12:28.509][0] ALSA device list:
1135[ 1.365922 / 01-01 00:12:28.509][0] No soundcards found.
1136[ 1.366003 / 01-01 00:12:28.509][0] Warning: unable to open an initial console.
1137[ 1.366395 / 01-01 00:12:28.509][0] Freeing unused kernel memory: 480K (c1600000 - c1678000)
1138[ 1.367545 / 01-01 00:12:28.509][0] init: init first stage started!
1139[ 1.374815 / 01-01 00:12:28.519][0] SELinux: Class can_socket not defined in policy.
1140[ 1.374829 / 01-01 00:12:28.519][0] SELinux: the above unknown classes and permissions will be denied
1141[ 1.380130 / 01-01 00:12:28.529][2] [Touch] touch_ic_init Start
1142[ 1.421240 / 01-01 00:12:28.569][1] IPA HW is not supported on this target
1143[ 1.421296 / 01-01 00:12:28.569][1] setting usb power supply type 4
1144[ 1.421329 / 01-01 00:12:28.569][1] msm_otg 78db000.usb: Avail curr from USB = 500
1145[ 1.421479 / 01-01 00:12:28.569][1] vote-SMBCHG: battchg_suspend: client 1 voting for 0 - on
1146[ 1.421493 / 01-01 00:12:28.569][1] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1147[ 1.421530 / 01-01 00:12:28.569][1] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1148[ 1.421541 / 01-01 00:12:28.569][1] vote-SMBCHG: usb_icl: client 0 voting for 500 - on
1149[ 1.421552 / 01-01 00:12:28.569][1] vote-SMBCHG: usb_icl: effective vote is now 500 voted by client 0
1150[ 1.421563 / 01-01 00:12:28.569][1] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
1151[ 1.421573 / 01-01 00:12:28.569][1] vote-SMBCHG: usb_suspend: client 2 voting for 0 - off
1152[ 1.421669 / 01-01 00:12:28.569][1] SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
1153[ 1.421678 / 01-01 00:12:28.569][0] SMBCHG: power_ok_handler: triggered: 0x01
1154[ 1.421700 / 01-01 00:12:28.569][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1155[ 1.421714 / 01-01 00:12:28.569][1] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1156[ 1.421725 / 01-01 00:12:28.569][1] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1157[ 1.421736 / 01-01 00:12:28.569][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1158[ 1.421794 / 01-01 00:12:28.569][1] SMBCHG: smbchg_usb_update_online_work: setting usb psy online = 1
1159[ 1.421820 / 01-01 00:12:28.569][1] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1160[ 1.421833 / 01-01 00:12:28.569][1] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1161[ 1.421843 / 01-01 00:12:28.569][1] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1162[ 1.421853 / 01-01 00:12:28.569][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1163[ 1.422070 / 01-01 00:12:28.569][1] FG: fg_age_detection: battery age not init
1164[ 1.422101 / 01-01 00:12:28.569][1] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19466072, ocv=-22, ibat=389850, rbatt=99978
1165[ 1.422206 / 01-01 00:12:28.569][1] vote-SMBCHG: battchg_suspend: client 1 voting for 0 - on
1166[ 1.422218 / 01-01 00:12:28.569][1] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1167[ 1.422251 / 01-01 00:12:28.569][1] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1168[ 1.422262 / 01-01 00:12:28.569][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1169[ 1.422274 / 01-01 00:12:28.569][1] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1170[ 1.422284 / 01-01 00:12:28.569][1] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1171[ 1.422293 / 01-01 00:12:28.569][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1172[ 1.422343 / 01-01 00:12:28.569][1] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1173[ 1.422356 / 01-01 00:12:28.569][1] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1174[ 1.422367 / 01-01 00:12:28.569][1] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1175[ 1.422377 / 01-01 00:12:28.569][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1176[ 1.422587 / 01-01 00:12:28.569][1] FG: fg_age_detection: battery age not init
1177[ 1.422614 / 01-01 00:12:28.569][1] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19520719, ocv=-22, ibat=477990, rbatt=99978
1178[ 1.423196 / 01-01 00:12:28.569][2] audit: type=1403 audit(1514765548.569:2): policy loaded auid=4294967295 ses=4294967295
1179[ 1.423837 / 01-01 00:12:28.569][2] init: (Initializing SELinux non-enforcing took 0.06s.)
1180[ 1.424236 / 01-01 00:12:28.569][0] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
1181[ 1.424255 / 01-01 00:12:28.569][0] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
1182[ 1.426274 / 01-01 00:12:28.569][2] init: init second stage started!
1183[ 1.426362 / 01-01 00:12:28.569][3] msm8952-asoc-wcd c051000.sound: default codec configured
1184[ 1.430111 / 01-01 00:12:28.579][3] Cable type is already defined
1185[ 1.430657 / 01-01 00:12:28.579][0] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
1186[ 1.430689 / 01-01 00:12:28.579][0] msm8952-asoc-wcd c051000.sound: snd_soc_register_card deferred(-517)-retry
1187[ 1.431534 / 01-01 00:12:28.579][1] init: Running restorecon...
1188[ 1.440091 / 01-01 00:12:28.589][2] [Touch] ft8006m_init: charger_state = 0x00
1189[ 1.440264 / 01-01 00:12:28.589][2] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x19 (ok)
1190[ 1.441627 / 01-01 00:12:28.589][0] [Touch] Success to get ic info data
1191[ 1.441643 / 01-01 00:12:28.589][0] [Touch] chip_id : 80, chip_id_low : 6, is_official : 1, fw_version : 11.0.0, fw_vendor_id : 3b,
1192[ 1.441643 / 01-01 00:12:28.589][0] lib_version_high : 0, lib_version_low : 1
1193[ 1.441856 / 01-01 00:12:28.589][0] [Touch] ft8006m_lpwg_mode : mode[0], screen[ON], sensor[FAR], qcover[OPEN]
1194[ 1.441866 / 01-01 00:12:28.589][0] [Touch] d->state[0]
1195[ 1.441877 / 01-01 00:12:28.589][0] [Touch] State changed from [0] to [0]
1196[ 1.441913 / 01-01 00:12:28.589][0] [Touch] ft8006m_notify_normal event=0x9
1197[ 1.441922 / 01-01 00:12:28.589][0] [Touch] NOTIFY_CONNECTION!
1198[ 1.441931 / 01-01 00:12:28.589][0] [Touch] TA Type: 1
1199[ 1.441942 / 01-01 00:12:28.589][0] [Touch] ft8006m_connect: write charger_state = 0x01
1200[ 1.442054 / 01-01 00:12:28.589][0] [Touch] Get Touch Firmware for CV1 TCL
1201[ 1.442065 / 01-01 00:12:28.589][0] [Touch] get fwpath from def_fwpath : touch/cv1/focaltech/LGECV1_TCL_FT8006M_VID0x3b_PID0x01_5P0_V0x8B_L0x05_20171120_all.bin
1202[ 1.442075 / 01-01 00:12:28.589][0] [Touch] fwpath[touch/cv1/focaltech/LGECV1_TCL_FT8006M_VID0x3b_PID0x01_5P0_V0x8B_L0x05_20171120_all.bin]
1203[ 1.442088 / 01-01 00:12:28.589][0] [Touch] fw size:111776, data: c0f8d530
1204[ 1.442100 / 01-01 00:12:28.589][0] [Touch] ft8006m_fw_compare : binary[V1.11] device[V1.11] -> update: 0, force: 0
1205[ 1.442111 / 01-01 00:12:28.589][0] [Touch] ft8006m_power, HW Reset
1206[ 1.442120 / 01-01 00:12:28.589][0] [Touch] ft8006m_reset_ctrl : HW Reset
1207[ 1.442131 / 01-01 00:12:28.589][0] [Touch] touch_gpio_direction_output - pin:64, value:0
1208[ 1.445245 / 01-01 00:12:28.589][3] lge_pm_get_cable_info : adc_read-1791000
1209[ 1.445257 / 01-01 00:12:28.589][3]
1210[ 1.445257 / 01-01 00:12:28.589][3]
1211[ 1.445257 / 01-01 00:12:28.589][3] [PM]Cable detected: 1791000(OPEN)(900, 500)
1212[ 1.445257 / 01-01 00:12:28.589][3]
1213[ 1.447160 / 01-01 00:12:28.589][0] [Touch] touch_gpio_direction_output - pin:64, value:1
1214[ 1.486583 / 01-01 00:12:28.629][3] init: waitpid failed: No child processes
1215[ 1.487429 / 01-01 00:12:28.629][3] init: (Loading properties from /default.prop took 0.00s.)
1216[ 1.487957 / 01-01 00:12:28.629][3] init: /init.rc: 13: invalid keyword 'setcon'
1217[ 1.488115 / 01-01 00:12:28.629][3] init: /init.rc: 61: invalid keyword 'load_all_props'
1218[ 1.488274 / 01-01 00:12:28.629][3] init: could not import file '/init.recovery.logd.rc' from '/init.rc': No such file or directory
1219[ 1.488468 / 01-01 00:12:28.629][3] init: (Parsing /init.recovery.usb.rc took 0.00s.)
1220[ 1.488546 / 01-01 00:12:28.629][3] init: (Parsing /init.recovery.service.rc took 0.00s.)
1221[ 1.488580 / 01-01 00:12:28.629][3] init: could not import file '/init.recovery.vold_decrypt.rc' from '/init.rc': No such file or directory
1222[ 1.488612 / 01-01 00:12:28.629][3] init: could not import file '/init.recovery.cv1.rc' from '/init.rc': No such file or directory
1223[ 1.488634 / 01-01 00:12:28.629][3] init: (Parsing /init.rc took 0.00s.)
1224[ 1.488771 / 01-01 00:12:28.629][3] audit: type=1400 audit(1514765548.629:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
1225[ 1.488851 / 01-01 00:12:28.629][3] init: Starting service 'ueventd'...
1226[ 1.489179 / 01-01 00:12:28.629][3] init: Waiting for /dev/.coldboot_done...
1227[ 1.490811 / 01-01 00:12:28.639][0] ueventd: ueventd started!
1228[ 1.501737 / 01-01 00:12:28.649][0] ueventd: Linking partition 'Basic data partition' as 'Basic_data_partition'
1229[ 1.621006 / 01-01 00:12:28.769][2] FG: fg_age_detection: battery age not init
1230[ 1.621043 / 01-01 00:12:28.769][2] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19220161, ocv=-22, ibat=-6780, rbatt=99978
1231[ 1.627969 / 01-01 00:12:28.769][2] FG: fg_age_detection: battery age not init
1232[ 1.740092 / 01-01 00:12:28.889][0] [Touch] touch_ic_init Start
1233[ 1.761509 / 01-01 00:12:28.909][0] msm_otg 78db000.usb: usb id adc = 1791000
1234[ 1.800101 / 01-01 00:12:28.949][0] [Touch] ft8006m_init: charger_state = 0x01
1235[ 1.801495 / 01-01 00:12:28.949][0] [Touch] Success to get ic info data
1236[ 1.801514 / 01-01 00:12:28.949][0] [Touch] chip_id : 80, chip_id_low : 6, is_official : 1, fw_version : 11.0.0, fw_vendor_id : 3b,
1237[ 1.801514 / 01-01 00:12:28.949][0] lib_version_high : 0, lib_version_low : 1
1238[ 1.801727 / 01-01 00:12:28.949][0] [Touch] ft8006m_lpwg_mode : mode[0], screen[ON], sensor[FAR], qcover[OPEN]
1239[ 1.801737 / 01-01 00:12:28.949][0] [Touch] d->state[0]
1240[ 1.801748 / 01-01 00:12:28.949][0] [Touch] State changed from [0] to [0]
1241[ 1.801765 / 01-01 00:12:28.949][0] [Touch] touch_ic_init End
1242[ 1.821574 / 01-01 00:12:28.969][2] ueventd: Coldboot took 0.33s.
1243[ 1.822039 / 01-01 00:12:28.969][3] init: Waiting for /dev/.coldboot_done took 0.33s.
1244[ 1.824645 / 01-01 00:12:28.969][3] android_usb android0: gadget enable(0)
1245[ 1.824661 / 01-01 00:12:28.969][3] enable_store: android_usb: already disabled
1246[ 1.824816 / 01-01 00:12:28.969][3] android_usb android0: LGE-USB request function list: adb
1247[ 1.824994 / 01-01 00:12:28.969][3] init: (Loading properties from /system/build.prop took 0.00s.)
1248[ 1.825027 / 01-01 00:12:28.969][3] init: (Loading properties from /vendor/build.prop took 0.00s.)
1249[ 1.825057 / 01-01 00:12:28.969][3] init: (Loading properties from /factory/factory.prop took 0.00s.)
1250[ 1.825099 / 01-01 00:12:28.969][3] fs_mgr: Cannot open file /fstab.cv1
1251[ 1.825119 / 01-01 00:12:28.969][3] init: unable to read fstab /fstab.cv1: No such file or directory
1252[ 1.825162 / 01-01 00:12:28.969][3] init: (Loading properties from /data/local.prop took 0.00s.)
1253[ 1.825191 / 01-01 00:12:28.969][3] init: Unable to open persistent property directory "/data/property": No such file or directory
1254[ 1.825614 / 01-01 00:12:28.969][3] init: Starting service 'set_permissive'...
1255[ 1.825925 / 01-01 00:12:28.969][3] init: Starting service 'recovery'...
1256[ 1.826186 / 01-01 00:12:28.969][3] init: Starting service 'ldconfigtxt'...
1257[ 1.826680 / 01-01 00:12:28.969][3] android_usb android0: gadget enable(0)
1258[ 1.826896 / 01-01 00:12:28.969][3] init: Starting service 'adbd'...
1259[ 1.827202 / 01-01 00:12:28.969][0] random: permissive.sh urandom read with 81 bits of entropy available
1260[ 1.827309 / 01-01 00:12:28.969][3] android_usb android0: gadget enable(1)
1261[ 1.827326 / 01-01 00:12:28.969][3] ffs_function_enable: ffs_function_enable: config->opened(0)
1262[ 1.827336 / 01-01 00:12:28.969][3] android_disable: android_disable: checked disable_depth(1)
1263[ 1.827350 / 01-01 00:12:28.969][3] android_enable: android_enable: checked disable_depth(2)
1264[ 1.830947 / 01-01 00:12:28.979][1] read descriptors
1265[ 1.830974 / 01-01 00:12:28.979][1] read strings
1266[ 1.830997 / 01-01 00:12:28.979][1] functionfs_ready_callback: functionfs_ready_callback: config->enabled(1), dev(ec933800)
1267[ 1.831008 / 01-01 00:12:28.979][1] android_enable: android_enable: checked disable_depth(1)
1268[ 1.831057 / 01-01 00:12:28.979][1] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
1269[ 1.837942 / 01-01 00:12:28.979][2] audit: type=1400 audit(1514765548.979:4): avc: denied { write } for pid=343 comm="touch" name="sbin" dev="rootfs" ino=10579 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1270[ 1.837985 / 01-01 00:12:28.979][2] audit: type=1400 audit(1514765548.979:5): avc: denied { add_name } for pid=343 comm="touch" name="ld.config.txt" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1271[ 1.838027 / 01-01 00:12:28.979][2] audit: type=1400 audit(1514765548.979:6): avc: denied { create } for pid=343 comm="touch" name="ld.config.txt" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1272[ 1.838085 / 01-01 00:12:28.979][2] audit: type=1400 audit(1514765548.979:7): avc: denied { write } for pid=343 comm="touch" path="/sbin/ld.config.txt" dev="rootfs" ino=11845 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1273[ 1.838642 / 01-01 00:12:28.979][3] init: Service 'ldconfigtxt' (pid 343) exited with status 0
1274[ 1.847727 / 01-01 00:12:28.989][1] audit: type=1400 audit(1514765548.989:8): avc: denied { write } for pid=348 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
1275[ 1.848462 / 01-01 00:12:28.989][3] init: Service 'set_permissive' (pid 341) exited with status 0
1276[ 1.906528 / 01-01 00:12:29.049][0] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=3750
1277[ 1.907127 / 01-01 00:12:29.049][3] init: avc: denied { set } for property=twrp.crash_counter pid=342 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
1278[ 1.908119 / 01-01 00:12:29.049][0] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=3750
1279[ 1.908600 / 01-01 00:12:29.049][0] mdss_fb_blank_sub: mdss_fb_open+0x10c/0x194 mode:0
1280[ 1.908755 / 01-01 00:12:29.049][1] mdss_fb_blank_sub: -
1281[ 1.916789 / 01-01 00:12:29.059][1] mdss_fb_blank_sub: fb_blank+0x54/0x88 mode:4
1282[ 1.916915 / 01-01 00:12:29.059][0] mdss_fb_blank_sub: -
1283[ 1.916918 / 01-01 00:12:29.059][0] [Touch] touch_suspend Start
1284[ 1.916926 / 01-01 00:12:29.059][0] [Touch] ft8006m_lpwg_mode : mode[0], screen[ON], sensor[FAR], qcover[OPEN]
1285[ 1.916928 / 01-01 00:12:29.059][0] [Touch] d->state[0]
1286[ 1.916931 / 01-01 00:12:29.059][0] [Touch] State changed from [0] to [0]
1287[ 1.916933 / 01-01 00:12:29.059][0] [Touch] touch_suspend End
1288[ 1.916994 / 01-01 00:12:29.059][0] mdss_fb_blank_sub: fb_blank+0x54/0x88 mode:0
1289[ 1.917115 / 01-01 00:12:29.059][0] mdss_fb_blank_sub: -
1290[ 1.917118 / 01-01 00:12:29.059][0] [Touch] touch_resume Start
1291[ 1.917120 / 01-01 00:12:29.059][0] [Touch] touch_resume End
1292[ 1.917138 / 01-01 00:12:29.059][1] [Touch] touch_ic_init Start
1293[ 1.944415 / 01-01 00:12:29.089][0] mdss_fb_blank_sub: fb_blank+0x54/0x88 mode:4
1294[ 1.961549 / 01-01 00:12:29.109][0] lge_set_display_power_ctrl: display_power_ctrl [0]
1295[ 1.970067 / 01-01 00:12:29.119][1] [Touch] ft8006m_init: charger_state = 0x01
1296[ 1.971365 / 01-01 00:12:29.119][0] [Touch] Success to get ic info data
1297[ 1.971371 / 01-01 00:12:29.119][0] [Touch] chip_id : 80, chip_id_low : 6, is_official : 1, fw_version : 11.0.0, fw_vendor_id : 3b,
1298[ 1.971371 / 01-01 00:12:29.119][0] lib_version_high : 0, lib_version_low : 1
1299[ 1.971571 / 01-01 00:12:29.119][0] [Touch] ft8006m_lpwg_mode : mode[0], screen[ON], sensor[FAR], qcover[OPEN]
1300[ 1.971573 / 01-01 00:12:29.119][0] [Touch] d->state[0]
1301[ 1.971576 / 01-01 00:12:29.119][0] [Touch] State changed from [0] to [0]
1302[ 1.971579 / 01-01 00:12:29.119][0] [Touch] touch_ic_init End
1303[ 2.057700 / 01-01 00:12:29.199][0] setting usb power supply type 4
1304[ 2.057748 / 01-01 00:12:29.199][0] vote-SMBCHG: battchg_suspend: client 1 voting for 0 - on
1305[ 2.057754 / 01-01 00:12:29.199][0] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1306[ 2.057778 / 01-01 00:12:29.199][0] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1307[ 2.057783 / 01-01 00:12:29.199][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1308[ 2.057790 / 01-01 00:12:29.199][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1309[ 2.057793 / 01-01 00:12:29.199][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1310[ 2.057872 / 01-01 00:12:29.199][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1311[ 2.057874 / 01-01 00:12:29.199][0] android_work: android_work: did not send uevent (0 0 00000000)
1312[ 2.057888 / 01-01 00:12:29.199][0] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1313[ 2.057893 / 01-01 00:12:29.199][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1314[ 2.057896 / 01-01 00:12:29.199][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1315[ 2.058097 / 01-01 00:12:29.199][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1316[ 2.058098 / 01-01 00:12:29.199][0] FG: fg_age_detection: battery age not init
1317[ 2.058118 / 01-01 00:12:29.199][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19220161, ocv=-22, ibat=-6780, rbatt=99978
1318[ 2.114460 / 01-01 00:12:29.269][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
1319[ 2.120027 / 01-01 00:12:29.269][0] setting usb power supply type 4
1320[ 2.120068 / 01-01 00:12:29.269][0] vote-SMBCHG: battchg_suspend: client 1 voting for 0 - on
1321[ 2.120072 / 01-01 00:12:29.269][0] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1322[ 2.120078 / 01-01 00:12:29.269][1] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1323[ 2.120094 / 01-01 00:12:29.269][0] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1324[ 2.120098 / 01-01 00:12:29.269][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1325[ 2.120104 / 01-01 00:12:29.269][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1326[ 2.120107 / 01-01 00:12:29.269][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1327[ 2.120190 / 01-01 00:12:29.269][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1328[ 2.120191 / 01-01 00:12:29.269][0] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1329[ 2.120205 / 01-01 00:12:29.269][0] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1330[ 2.120211 / 01-01 00:12:29.269][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1331[ 2.120214 / 01-01 00:12:29.269][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1332[ 2.120411 / 01-01 00:12:29.269][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1333[ 2.120413 / 01-01 00:12:29.269][0] FG: fg_age_detection: battery age not init
1334[ 2.120432 / 01-01 00:12:29.269][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19220161, ocv=-22, ibat=-6780, rbatt=99978
1335[ 2.190126 / 01-01 00:12:29.339][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
1336[ 2.213364 / 01-01 00:12:29.369][0] android_usb gadget: high-speed config #1: 86000c8.android_usb
1337[ 2.213388 / 01-01 00:12:29.369][0] setting usb power supply type 4
1338[ 2.213437 / 01-01 00:12:29.369][0] vote-SMBCHG: battchg_suspend: client 1 voting for 0 - on
1339[ 2.213441 / 01-01 00:12:29.369][0] SMBCHG: smbchg_config_chg_battery_type: Battery-type not identified
1340[ 2.213463 / 01-01 00:12:29.369][0] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1341[ 2.213467 / 01-01 00:12:29.369][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1342[ 2.213472 / 01-01 00:12:29.369][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1343[ 2.213475 / 01-01 00:12:29.369][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1344[ 2.213770 / 01-01 00:12:29.369][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1345[ 2.213771 / 01-01 00:12:29.369][0] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1346[ 2.213778 / 01-01 00:12:29.369][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1347[ 2.213781 / 01-01 00:12:29.369][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1348[ 2.213982 / 01-01 00:12:29.369][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1349[ 2.213983 / 01-01 00:12:29.369][0] FG: fg_age_detection: battery age not init
1350[ 2.214002 / 01-01 00:12:29.369][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=-19220161, ocv=-22, ibat=-6780, rbatt=99978
1351[ 2.250317 / 01-01 00:12:29.399][0] tcl_ft8006m_mdss_dsi_panel_reset: skip panel reset low
1352[ 2.250331 / 01-01 00:12:29.399][0] tcl_ft8006m_mdss_dsi_panel_power_off: keep panel power for lpwg mode
1353[ 2.251834 / 01-01 00:12:29.399][0] mdss_fb_blank_sub: -
1354[ 2.251839 / 01-01 00:12:29.399][0] [Touch] touch_suspend Start
1355[ 2.251845 / 01-01 00:12:29.399][0] [Touch] ft8006m_lpwg_mode : mode[0], screen[ON], sensor[FAR], qcover[OPEN]
1356[ 2.251847 / 01-01 00:12:29.399][0] [Touch] d->state[0]
1357[ 2.251850 / 01-01 00:12:29.399][0] [Touch] State changed from [0] to [0]
1358[ 2.251852 / 01-01 00:12:29.399][0] [Touch] touch_suspend End
1359[ 2.252339 / 01-01 00:12:29.399][0] mdss_fb_blank_sub: fb_blank+0x54/0x88 mode:0
1360[ 2.254433 / 01-01 00:12:29.399][0] tcl_ft8006m_mdss_dsi_panel_power_on: skip panel power control
1361[ 2.261802 / 01-01 00:12:29.409][0] [Touch] ft8006m_notify_normal event=0x20
1362[ 2.261805 / 01-01 00:12:29.409][0] [Touch] LCD_EVENT_TOUCH_RESET_START!
1363[ 2.261814 / 01-01 00:12:29.409][0] [Touch] touch_gpio_direction_output - pin:64, value:0
1364[ 2.270145 / 01-01 00:12:29.419][0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1365[ 2.271836 / 01-01 00:12:29.419][0] tcl_ft8006m_mdss_dsi_panel_reset: panel reset high
1366[ 2.276858 / 01-01 00:12:29.419][0] [Touch] ft8006m_notify_normal event=0x21
1367[ 2.276860 / 01-01 00:12:29.419][0] [Touch] LCD_EVENT_TOUCH_RESET_END!
1368[ 2.276863 / 01-01 00:12:29.419][0] [Touch] touch_gpio_direction_output - pin:64, value:1
1369[ 2.321913 / 01-01 00:12:29.479][0] mdss_dsi_panel_on: ndx=0 cmd_cnt=12
1370[ 2.570119 / 01-01 00:12:29.719][0] [Touch] touch_ic_init Start
1371[ 2.593007 / 01-01 00:12:29.749][0] mdss_fb_blank_sub: -
1372[ 2.593011 / 01-01 00:12:29.749][0] [Touch] touch_resume Start
1373[ 2.630123 / 01-01 00:12:29.779][0] [Touch] ft8006m_init: charger_state = 0x01
1374[ 2.631469 / 01-01 00:12:29.779][0] [Touch] Success to get ic info data
1375[ 2.631475 / 01-01 00:12:29.779][0] [Touch] chip_id : 80, chip_id_low : 6, is_official : 1, fw_version : 11.0.0, fw_vendor_id : 3b,
1376[ 2.631475 / 01-01 00:12:29.779][0] lib_version_high : 0, lib_version_low : 1
1377[ 2.631675 / 01-01 00:12:29.779][0] [Touch] ft8006m_lpwg_mode : mode[0], screen[ON], sensor[FAR], qcover[OPEN]
1378[ 2.631677 / 01-01 00:12:29.779][0] [Touch] d->state[0]
1379[ 2.631680 / 01-01 00:12:29.779][0] [Touch] State changed from [0] to [0]
1380[ 2.631694 / 01-01 00:12:29.779][0] [Touch] touch_ic_init End
1381[ 2.631701 / 01-01 00:12:29.779][0] [Touch] touch_resume End
1382[ 2.631711 / 01-01 00:12:29.779][0] [Touch] touch_ic_init Start
1383[ 2.632038 / 01-01 00:12:29.779][0] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=3750
1384[ 2.644878 / 01-01 00:12:29.789][2] FG: fg_backup_sram_registers: Backing SRAM registers
1385[ 2.648174 / 01-01 00:12:29.789][2] FG: update_sram_data: last_soc: 250 last_cc_soc: 263172014
1386[ 2.648222 / 01-01 00:12:29.789][2] FG: update_sram_data: soc:[50], soc_raw[9702], voltage:[4214300], ocv:[4323094], current:[515133], batt_temp:[200], charge_raw [0 / 0]
1387[ 2.648513 / 01-01 00:12:29.789][2] FG: update_temp_data: batt temp was changed !! 0 => 302
1388[ 2.648562 / 01-01 00:12:29.789][2] FG: delayed_init_work: FG: HW_init success
1389[ 2.648631 / 01-01 00:12:29.789][2] vote-SMBCHG: battchg_suspend: client 0 voting for 0 - on
1390[ 2.648642 / 01-01 00:12:29.789][2] FG: set_prop_enable_charging: disabling charging
1391[ 2.648927 / 01-01 00:12:29.789][2] FG: slope_limiter_work: Slope limit sts: 3 val: 6000000 buf[0 8a] written
1392[ 2.652524 / 01-01 00:12:29.799][2] FG: fg_backup_sram_registers: Backing SRAM registers
1393[ 2.655818 / 01-01 00:12:29.799][2] FG: update_sram_data: last_soc: 250 last_cc_soc: 263172014
1394[ 2.655864 / 01-01 00:12:29.799][2] FG: update_sram_data: soc:[50], soc_raw[9702], voltage:[4214300], ocv:[4323094], current:[515133], batt_temp:[302], charge_raw [0 / 0]
1395[ 2.690069 / 01-01 00:12:29.839][0] [Touch] ft8006m_init: charger_state = 0x01
1396[ 2.691359 / 01-01 00:12:29.839][0] [Touch] Success to get ic info data
1397[ 2.691366 / 01-01 00:12:29.839][0] [Touch] chip_id : 80, chip_id_low : 6, is_official : 1, fw_version : 11.0.0, fw_vendor_id : 3b,
1398[ 2.691366 / 01-01 00:12:29.839][0] lib_version_high : 0, lib_version_low : 1
1399[ 2.691566 / 01-01 00:12:29.839][0] [Touch] ft8006m_lpwg_mode : mode[0], screen[ON], sensor[FAR], qcover[OPEN]
1400[ 2.691568 / 01-01 00:12:29.839][0] [Touch] d->state[0]
1401[ 2.691571 / 01-01 00:12:29.839][0] [Touch] State changed from [0] to [0]
1402[ 2.691574 / 01-01 00:12:29.839][0] [Touch] touch_ic_init End
1403[ 2.693409 / 01-01 00:12:29.839][0] audit: type=1400 audit(1514765549.839:9): avc: denied { create } for pid=342 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
1404[ 2.694041 / 01-01 00:12:29.839][0] audit: type=1400 audit(1514765549.839:10): avc: denied { create } for pid=342 comm="recovery" name="persist" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1405[ 2.709122 / 01-01 00:12:29.849][1] EXT4-fs (mmcblk0p54): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
1406[ 2.709185 / 01-01 00:12:29.849][1] SELinux: Context u:object_r:persist_file:s0 is not valid (left unmapped).
1407[ 2.710765 / 01-01 00:12:29.859][2] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=3750
1408[ 2.711086 / 01-01 00:12:30.000][2] SELinux: Context u:object_r:persist_time_file:s0 is not valid (left unmapped).
1409[ 2.744678 / 09-09 18:24:37.315][0] EXT4-fs (mmcblk0p59): warning: maximal mount count reached, running e2fsck is recommended
1410[ 2.744920 / 09-09 18:24:37.315][0] EXT4-fs (mmcblk0p59): mounted filesystem with ordered data mode. Opts:
1411[ 2.758110 / 09-09 18:24:37.325][0] EXT4-fs (mmcblk0p58): mounted filesystem with ordered data mode. Opts:
1412[ 2.771866 / 09-09 18:24:37.345][0] EXT4-fs (mmcblk0p54): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
1413[ 2.772290 / 09-09 18:24:37.345][0] msm_otg 78db000.usb: msm_adc_notification: state = high
1414[ 2.772303 / 09-09 18:24:37.345][0] msm_otg 78db000.usb: ID status_w
1415[ 2.775429 / 09-09 18:24:37.345][0] FAT-fs (mmcblk0p1): Unrecognized mount option "barrier=0" or missing value
1416[ 2.903673 / 09-09 18:24:37.475][3] init: Untracked pid 388 exited with status 0
1417[ 3.120070 / 09-09 18:24:37.695][1] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1418[ 4.120124 / 09-09 18:24:38.695][1] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1419[ 4.640139 / 09-09 18:24:39.215][2] FG: fg_batt_profile_init: battery id = 98653
1420[ 4.640161 / 09-09 18:24:39.215][2] FG: update_battery_type: [FG_EST]:battery_id : 130
1421[ 4.640172 / 09-09 18:24:39.215][2] FG: update_battery_type: [FG_EST]:use battery type : LGE_BL45F1F_BYD_2500mAh
1422[ 4.640194 / 09-09 18:24:39.215][2] of_batterydata_get_best_profile: [FG_EST]:LGE_BL45F1F_BYD_2500mAh found
1423[ 4.644634 / 09-09 18:24:39.215][2] FG: fg_set_minfreq: Set minfreq enable
1424[ 4.644652 / 09-09 18:24:39.215][2] FG: fg_batt_profile_init: [FG_EST]:vbat_est_diff=8545,v_current_pred=4205755,v=4214300
1425[ 4.644966 / 09-09 18:24:39.215][2] FG: fg_cap_learning_load_data: learned capacity 0-> 2402000/962 uah
1426[ 4.645000 / 09-09 18:24:39.215][2] FG: fg_batt_profile_init: [FG_EST]:Battery profiles same, same battery
1427[ 4.646045 / 09-09 18:24:39.215][2] FG: fg_set_minfreq: Set minfreq disable
1428[ 4.646059 / 09-09 18:24:39.215][2] vote-SMBCHG: battchg_suspend: client 0 voting for 0 - off
1429[ 4.646070 / 09-09 18:24:39.215][2] FG: set_prop_enable_charging: enabling charging
1430[ 4.646091 / 09-09 18:24:39.215][2] FG: update_chg_iterm: current = -100, converted_raw = fd71, data = 71 fd
1431[ 4.646705 / 09-09 18:24:39.215][2] FG: update_cc_cv_setpoint: Wrote 62 70 to address 4f8 for CC_CV setpoint
1432[ 4.647476 / 09-09 18:24:39.215][2] FG: populate_system_data: coeffs1 = 3970703 -1348632 2759765 -1022460
1433[ 4.647487 / 09-09 18:24:39.215][2] FG: populate_system_data: coeffs2 = 3685546 -308105 3822265 -5902343
1434[ 4.647499 / 09-09 18:24:39.215][2] FG: populate_system_data: coeffs3 = 3095703 22281250 -285250000 1234000000
1435[ 4.648988 / 09-09 18:24:39.215][2] FG: fg_calc_and_store_cc_soc_coeff: new cc_soc_coeff 6972939 [f9 8a] saved to sram
1436[ 4.649301 / 09-09 18:24:39.215][2] FG: populate_system_data: cutoff_voltage = 3199901, nom_cap_uah = 2402000 p1p2 = 36, p2p3 = 5
1437[ 4.649364 / 09-09 18:24:39.215][2] FG: check_update_soc_lge_5level: [FG_DELTA]:SOC_Raw=0xFA,SOC_Origin=97,SOC_Scale_raw=10352,SOC_scale=100,SOC_5LEVEL_Raw=10352,SOC_5LEVEL=100,Voltage=4214,OCV=4323,current=515,temp=30
1438[ 4.649379 / 09-09 18:24:39.215][2] FG: fg_batt_profile_init: soc:[100], voltage:[4214300], ocv:[4323094], current:[515133], batt_temp:[302],cycle_count : [0], residence : [234985]
1439[ 4.649390 / 09-09 18:24:39.215][2] FG: fg_batt_profile_init: [FG_OPTION]first_soc_est_done flag true
1440[ 4.649476 / 09-09 18:24:39.215][2] vote-SMBCHG: battchg_suspend: client 1 voting for 0 - off
1441[ 4.649769 / 09-09 18:24:39.215][2] of_batterydata_get_best_profile: [FG_EST]:LGE_BL45F1F_BYD_2500mAh found
1442[ 4.649890 / 09-09 18:24:39.215][2] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1443[ 4.649902 / 09-09 18:24:39.215][2] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1444[ 4.649975 / 09-09 18:24:39.215][2] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1445[ 4.649986 / 09-09 18:24:39.215][2] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1446[ 4.649996 / 09-09 18:24:39.215][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1447[ 4.650237 / 09-09 18:24:39.225][2] FG: fg_config_esr_extract: ESR extract already enabled
1448[ 4.650258 / 09-09 18:24:39.225][2] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
1449[ 4.650307 / 09-09 18:24:39.225][2] SMBCHG: get_prop_charge_type: chg_wake_locked
1450[ 4.650337 / 09-09 18:24:39.225][2] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1451[ 4.650346 / 09-09 18:24:39.225][0] random: nonblocking pool is initialized
1452[ 4.650417 / 09-09 18:24:39.225][2] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1453[ 4.650428 / 09-09 18:24:39.225][2] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1454[ 4.650438 / 09-09 18:24:39.225][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1455[ 4.650614 / 09-09 18:24:39.225][2] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2295264, ocv=4323094, ibat=-50850, rbatt=334985
1456[ 4.653377 / 09-09 18:24:39.225][2] FG: fg_backup_sram_registers: Backing SRAM registers
1457[ 4.656672 / 09-09 18:24:39.225][2] FG: update_sram_data: last_soc: 250 last_cc_soc: 263172014
1458[ 4.656728 / 09-09 18:24:39.225][2] FG: update_sram_data: soc:[100], soc_raw[9703], voltage:[4349187], ocv:[4323094], current:[152], batt_temp:[302], charge_raw [2329564 / 2402000]
1459[ 4.745885 / 09-09 18:24:39.325][1] SMBCHG: fastchg_handler: p2f triggered
1460[ 4.745922 / 09-09 18:24:39.325][1] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1461[ 4.745991 / 09-09 18:24:39.325][1] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1462[ 4.746002 / 09-09 18:24:39.325][1] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1463[ 4.746012 / 09-09 18:24:39.325][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1464[ 4.746175 / 09-09 18:24:39.325][1] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2276453, ocv=4323094, ibat=-50850, rbatt=337792
1465[ 4.746303 / 09-09 18:24:39.325][1] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1466[ 4.746631 / 09-09 18:24:39.325][1] FG: fg_config_esr_extract: ESR extract already enabled
1467[ 4.746644 / 09-09 18:24:39.325][1] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
1468[ 4.746788 / 09-09 18:24:39.325][1] FG: fg_cap_learning_check: checking battery soc (97 vs 15)
1469[ 4.746800 / 09-09 18:24:39.325][1] FG: fg_cap_learning_check: battery soc too high (97 > 15), aborting
1470[ 4.747308 / 09-09 18:24:39.325][1] FG: discharge_gain_work: Capacity: 100, medc_gain: 3 highc_gain: 2
1471[ 4.747930 / 09-09 18:24:39.325][1] FG: discharge_gain_work: Value [0 82] written to ki_coeff_medc
1472[ 4.748185 / 09-09 18:24:39.325][1] FG: update_cycle_count: batt_soc: f8 bucket: 7
1473[ 4.748590 / 09-09 18:24:39.325][1] FG: slope_limiter_work: Slope limit sts: 1 val: 6000000 buf[0 8a] written
1474[ 4.748877 / 09-09 18:24:39.325][1] FG: discharge_gain_work: Value [0 80] written to ki_coeff_highc
1475[ 5.120130 / 09-09 18:24:39.695][1] SMBCHG: smbchg_monitor_batt_temp: first_soc_est_done is not true
1476[ 6.120136 / 09-09 18:24:40.695][1] LGE charging scenario V2: state 0 -> 0(0-1), temp=300, volt=4349, BTM=0, charger=1, cur_set=900/900, chg_cur = 0
1477[ 6.120157 / 09-09 18:24:40.695][1] SMBCHG: smbchg_monitor_batt_volt_for_iusb: uv = 4349187 decrease_iusb = 0
1478[ 6.120168 / 09-09 18:24:40.695][1] SMBCHG: smbchg_monitor_batt_volt_for_iusb: batt_volt = 4349187 chg_type = 4 lcd on/off = 1
1479[ 6.120181 / 09-09 18:24:40.695][1] SMBCHG: smbchg_monitor_batt_temp: batt temp = 300, batt volt = 4349187, pre_otp_ibat = 2000, otp_ibat = 900
1480[ 6.120191 / 09-09 18:24:40.695][1] SMBCHG: smbchg_monitor_batt_temp: set otp_ibat to 900
1481[ 6.120202 / 09-09 18:24:40.695][1] vote-SMBCHG: fcc: client 3 voting for 900 - on
1482[ 6.120226 / 09-09 18:24:40.695][1] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1483[ 6.120236 / 09-09 18:24:40.695][1] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1484[ 6.120247 / 09-09 18:24:40.695][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1485[ 6.120430 / 09-09 18:24:40.695][1] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2331100, ocv=4323094, ibat=-138990, rbatt=337792
1486[ 6.130174 / 09-09 18:24:40.705][1] vote-SMBCHG: usb_icl: client 7 voting for 900 - on
1487[ 6.130193 / 09-09 18:24:40.705][1] vote-SMBCHG: fcc: client 4 voting for 900 - on
1488[ 6.130204 / 09-09 18:24:40.705][1] SMBCHG: charging_state_delay: Couldn't update vote ret = -294544896
1489[ 6.234294 / 09-09 18:24:40.805][1] audit_printk_skb: 33 callbacks suppressed
1490[ 6.234313 / 09-09 18:24:40.805][1] audit: type=1400 audit(1536517480.805:22): avc: denied { open } for pid=342 comm="recovery" path="/dev/__properties__/u:object_r:userinit_prop:s0" dev="tmpfs" ino=11417 scontext=u:r:recovery:s0 tcontext=u:object_r:userinit_prop:s0 tclass=file permissive=1
1491[ 6.234347 / 09-09 18:24:40.805][1] audit: type=1400 audit(1536517480.805:23): avc: denied { getattr } for pid=342 comm="recovery" path="/dev/__properties__/u:object_r:userinit_prop:s0" dev="tmpfs" ino=11417 scontext=u:r:recovery:s0 tcontext=u:object_r:userinit_prop:s0 tclass=file permissive=1
1492[ 6.234428 / 09-09 18:24:40.805][1] audit: type=1400 audit(1536517480.805:24): avc: denied { open } for pid=342 comm="recovery" path="/dev/__properties__/u:object_r:adbtcp_prop:s0" dev="tmpfs" ino=11418 scontext=u:r:recovery:s0 tcontext=u:object_r:adbtcp_prop:s0 tclass=file permissive=1
1493[ 6.234458 / 09-09 18:24:40.805][1] audit: type=1400 audit(1536517480.805:25): avc: denied { getattr } for pid=342 comm="recovery" path="/dev/__properties__/u:object_r:adbtcp_prop:s0" dev="tmpfs" ino=11418 scontext=u:r:recovery:s0 tcontext=u:object_r:adbtcp_prop:s0 tclass=file permissive=1
1494[ 6.235295 / 09-09 18:24:40.805][1] audit: type=1400 audit(1536517480.805:26): avc: denied { open } for pid=342 comm="recovery" path="/dev/__properties__/u:object_r:safemode_prop:s0" dev="tmpfs" ino=11427 scontext=u:r:recovery:s0 tcontext=u:object_r:safemode_prop:s0 tclass=file permissive=1
1495[ 6.235326 / 09-09 18:24:40.805][1] audit: type=1400 audit(1536517480.805:27): avc: denied { getattr } for pid=342 comm="recovery" path="/dev/__properties__/u:object_r:safemode_prop:s0" dev="tmpfs" ino=11427 scontext=u:r:recovery:s0 tcontext=u:object_r:safemode_prop:s0 tclass=file permissive=1
1496[ 6.235384 / 09-09 18:24:40.805][1] audit: type=1400 audit(1536517480.805:28): avc: denied { open } for pid=342 comm="recovery" path="/dev/__properties__/u:object_r:mmc_prop:s0" dev="tmpfs" ino=11428 scontext=u:r:recovery:s0 tcontext=u:object_r:mmc_prop:s0 tclass=file permissive=1
1497[ 6.235415 / 09-09 18:24:40.805][1] audit: type=1400 audit(1536517480.805:29): avc: denied { getattr } for pid=342 comm="recovery" path="/dev/__properties__/u:object_r:mmc_prop:s0" dev="tmpfs" ino=11428 scontext=u:r:recovery:s0 tcontext=u:object_r:mmc_prop:s0 tclass=file permissive=1
1498[ 6.235476 / 09-09 18:24:40.805][1] audit: type=1400 audit(1536517480.805:30): avc: denied { open } for pid=342 comm="recovery" path="/dev/__properties__/u:object_r:logpersistd_logging_prop:s0" dev="tmpfs" ino=11429 scontext=u:r:recovery:s0 tcontext=u:object_r:logpersistd_logging_prop:s0 tclass=file permissive=1
1499[ 6.235508 / 09-09 18:24:40.805][1] audit: type=1400 audit(1536517480.805:31): avc: denied { getattr } for pid=342 comm="recovery" path="/dev/__properties__/u:object_r:logpersistd_logging_prop:s0" dev="tmpfs" ino=11429 scontext=u:r:recovery:s0 tcontext=u:object_r:logpersistd_logging_prop:s0 tclass=file permissive=1
1500[ 6.993525 / 09-09 18:24:41.565][0] mmc1: sdhci_msm_execute_tuning: finally setting the tuning phase to 15
1501[ 7.091397 / 09-09 18:24:41.665][1] mdss_fb_set_bl_brightness: value=255 -> bl_lvl=3750
1502[ 7.094970 / 09-09 18:24:41.665][1] init: avc: denied { set } for property=sys.usb.config pid=342 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1
1503[ 7.095079 / 09-09 18:24:41.665][1] android_usb android0: gadget enable(0)
1504[ 7.095092 / 09-09 18:24:41.665][1] android_disable: android_disable: checked disable_depth(0)
1505[ 7.095143 / 09-09 18:24:41.665][1] ffs_function_disable: ffs_function_disable: config->opened(1)
1506[ 7.095770 / 09-09 18:24:41.665][2] android_usb android0: gadget enable(0)
1507[ 7.095836 / 09-09 18:24:41.665][2] android_usb android0: LGE-USB request function list: mtp,adb
1508[ 7.095888 / 09-09 18:24:41.665][2] android_usb android0: gadget enable(1)
1509[ 7.095902 / 09-09 18:24:41.665][2] ffs_function_enable: ffs_function_enable: config->opened(1)
1510[ 7.095912 / 09-09 18:24:41.665][2] android_enable: android_enable: checked disable_depth(1)
1511[ 7.095922 / 09-09 18:24:41.665][2] mtp_bind_config
1512[ 7.130091 / 09-09 18:24:41.705][2] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
1513[ 7.133141 / 09-09 18:24:41.705][0] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
1514[ 7.133174 / 09-09 18:24:41.705][0] android_work: android_work: did not send uevent (1 1 00000000)
1515[ 7.136623 / 09-09 18:24:41.705][0] EXT4-fs (mmcblk0p58): mounted filesystem with ordered data mode. Opts:
1516[ 7.234924 / 09-09 18:24:41.805][0] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
1517[ 7.234951 / 09-09 18:24:41.805][0] setting usb power supply type 4
1518[ 7.235035 / 09-09 18:24:41.805][0] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1519[ 7.235096 / 09-09 18:24:41.805][0] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1520[ 7.235109 / 09-09 18:24:41.805][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1521[ 7.235123 / 09-09 18:24:41.805][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1522[ 7.235134 / 09-09 18:24:41.805][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1523[ 7.235144 / 09-09 18:24:41.805][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1524[ 7.235215 / 09-09 18:24:41.805][0] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1525[ 7.235229 / 09-09 18:24:41.805][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1526[ 7.235240 / 09-09 18:24:41.805][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1527[ 7.235249 / 09-09 18:24:41.805][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1528[ 7.235413 / 09-09 18:24:41.805][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2303776, ocv=4323094, ibat=-94920, rbatt=337792
1529[ 7.290647 / 09-09 18:24:41.865][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
1530[ 7.296149 / 09-09 18:24:41.865][0] setting usb power supply type 4
1531[ 7.296235 / 09-09 18:24:41.865][0] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1532[ 7.296247 / 09-09 18:24:41.865][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1533[ 7.296261 / 09-09 18:24:41.865][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1534[ 7.296271 / 09-09 18:24:41.865][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1535[ 7.296282 / 09-09 18:24:41.865][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1536[ 7.296375 / 09-09 18:24:41.865][0] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1537[ 7.296398 / 09-09 18:24:41.865][0] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1538[ 7.296412 / 09-09 18:24:41.865][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1539[ 7.296422 / 09-09 18:24:41.865][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1540[ 7.296432 / 09-09 18:24:41.865][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1541[ 7.296595 / 09-09 18:24:41.865][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2331100, ocv=4323094, ibat=-138990, rbatt=337792
1542[ 7.366384 / 09-09 18:24:41.935][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
1543[ 7.389673 / 09-09 18:24:41.955][0] android_usb gadget: high-speed config #1: 86000c8.android_usb
1544[ 7.389716 / 09-09 18:24:41.955][0] setting usb power supply type 4
1545[ 7.389818 / 09-09 18:24:41.955][0] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1546[ 7.389830 / 09-09 18:24:41.955][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1547[ 7.389844 / 09-09 18:24:41.955][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1548[ 7.389855 / 09-09 18:24:41.955][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1549[ 7.389865 / 09-09 18:24:41.955][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1550[ 7.389957 / 09-09 18:24:41.955][0] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1551[ 7.389972 / 09-09 18:24:41.955][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: usb_supply_type : 4
1552[ 7.389983 / 09-09 18:24:41.955][0] TIME-TO-FULL: lge_time_to_full_get_charging_current: Determine Setting Current : [445]
1553[ 7.389992 / 09-09 18:24:41.955][0] TIME-TO-FULL: ttf_external_power_changed: initial charge_current = 445
1554[ 7.390170 / 09-09 18:24:41.965][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2303776, ocv=4323094, ibat=-94920, rbatt=337792
1555[ 7.440145 / 09-09 18:24:42.015][0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1556[ 7.897324 / 09-09 18:24:42.475][1] mtp_open
1557[ 8.418308 / 09-09 18:24:42.995][0] [Touch] 1 finger pressed:<0>( 170, 793, 45)
1558[ 8.434675 / 09-09 18:24:43.005][0] [Touch] finger released:<0>( 170, 793, 45)
1559[ 10.200089 / 09-09 18:24:44.775][1] pet_watchdog
1560[ 11.340524 / 09-09 18:24:45.915][0] TIME-TO-FULL: lge_battery_profile_read_work: Battery Profile Name : LGE_BL45F1F_BYD_2500mAh
1561[ 11.340544 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: Find Battery Profile
1562[ 11.340556 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: Battery Profile : LGE_BL45F1F_BYD_2500mAh
1563[ 11.340573 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: Applied LGE_BL45F1F_BYD_2500mAh Profile CC CV DATA
1564[ 11.340586 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_time_to_full_cc_table_recovery: TTF CC Table Recovery
1565[ 11.340597 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: USE LGE_BL45F1F_BYD_2500mAh Battery Profile
1566[ 11.340606 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: CC Table
1567[ 11.340616 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: current, soc
1568[ 11.340626 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 925, 0
1569[ 11.340636 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 750, 524
1570[ 11.340645 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: CV Table
1571[ 11.340655 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: current, soc, time
1572[ 11.340665 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 674, 958, 900
1573[ 11.340676 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 642, 963, 846
1574[ 11.340686 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 622, 967, 788
1575[ 11.340696 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 595, 971, 728
1576[ 11.340706 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 574, 974, 667
1577[ 11.340716 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 545, 977, 603
1578[ 11.340726 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 531, 980, 537
1579[ 11.340736 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 500, 983, 468
1580[ 11.340746 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 482, 986, 398
1581[ 11.340756 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 455, 989, 325
1582[ 11.340766 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 438, 993, 247
1583[ 11.340776 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 414, 996, 168
1584[ 11.340787 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 399, 999, 86
1585[ 11.340797 / 09-09 18:24:45.915][1] TIME-TO-FULL: lge_battery_profile_read_work: 374, 1000, 0
1586[ 12.451313 / 09-09 18:24:47.025][0] [Touch] 1 finger pressed:<0>( 117,1115, 45)
1587[ 12.567847 / 09-09 18:24:47.135][0] [Touch] finger released:<0>( 119,1116, 45)
1588[ 15.518291 / 09-09 18:24:50.085][0] [Touch] 1 finger pressed:<0>( 58, 502, 30)
1589[ 15.684734 / 09-09 18:24:50.255][3] [Touch] finger released:<0>( 61, 506, 30)
1590[ 17.285101 / 09-09 18:24:51.865][3] [Touch] 1 finger pressed:<0>( 534, 775, 45)
1591[ 17.418198 / 09-09 18:24:51.985][3] [Touch] finger released:<0>( 539, 775, 45)
1592[ 19.051841 / 09-09 18:24:53.625][3] [Touch] 1 finger pressed:<0>( 64, 300, 40)
1593[ 19.184958 / 09-09 18:24:53.755][3] [Touch] finger released:<0>( 57, 310, 40)
1594[ 19.242560 / 09-09 18:24:53.815][0] EXT4-fs (mmcblk0p58): mounted filesystem with ordered data mode. Opts:
1595[ 19.685045 / 09-09 18:24:54.255][3] [Touch] 1 finger pressed:<0>( 56, 360, 45)
1596[ 19.818321 / 09-09 18:24:54.385][3] [Touch] finger released:<0>( 53, 364, 45)
1597[ 20.220084 / 09-09 18:24:54.795][1] pet_watchdog
1598[ 21.084531 / 09-09 18:24:55.665][3] [Touch] 1 finger pressed:<0>( 53, 490, 45)
1599[ 21.235465 / 09-09 18:24:55.805][3] [Touch] finger released:<0>( 51, 507, 45)
1600[ 21.701428 / 09-09 18:24:56.275][3] [Touch] 1 finger pressed:<0>( 22, 464, 40)
1601[ 21.834726 / 09-09 18:24:56.405][3] [Touch] finger released:<0>( 36, 489, 40)
1602[ 22.168725 / 09-09 18:24:56.735][3] [Touch] 1 finger pressed:<0>( 55, 562, 55)
1603[ 22.301959 / 09-09 18:24:56.875][3] [Touch] finger released:<0>( 58, 560, 55)
1604[ 22.308089 / 09-09 18:24:56.875][1] FAT-fs (mmcblk0p1): Unrecognized mount option "barrier=0" or missing value
1605[ 24.780354 / 09-09 18:24:59.355][1] FG: update_temp_data: batt temp was changed !! 302 => 295
1606[ 30.240094 / 09-09 18:25:04.815][3] pet_watchdog
1607[ 31.200090 / 09-09 18:25:05.775][2] FG: fg_batt_print_work: [FG_INFO]:RS=0xFA, BS=97, QS=97, SOC=100, Rem=2329, Voltage=4349mV,OCV=4323mV, Current=0mA, Temp=29, Age=100, cycle=0
1608[ 34.723001 / 09-09 18:25:09.295][2] FG: fg_backup_sram_registers: Backing SRAM registers
1609[ 34.726303 / 09-09 18:25:09.295][2] FG: update_sram_data: last_soc: 250 last_cc_soc: 263172014
1610[ 34.726361 / 09-09 18:25:09.295][2] FG: update_sram_data: soc:[100], soc_raw[9713], voltage:[4397099], ocv:[4338658], current:[-176390], batt_temp:[295], charge_raw [2332803 / 2402000]
1611[ 35.785095 / 09-09 18:25:10.365][3] [Touch] 1 finger pressed:<0>( 158,1262, 45)
1612[ 35.918288 / 09-09 18:25:10.485][3] [Touch] finger released:<0>( 158,1257, 45)
1613[ 37.135277 / 09-09 18:25:11.715][3] [Touch] 1 finger pressed:<0>( 136,1018, 40)
1614[ 37.252119 / 09-09 18:25:11.825][3] [Touch] finger released:<0>( 145,1031, 40)
1615[ 38.102023 / 09-09 18:25:12.675][3] [Touch] 1 finger pressed:<0>( 124, 785, 45)
1616[ 38.201222 / 09-09 18:25:12.775][3] [Touch] finger released:<0>( 127, 791, 45)
1617[ 38.203300 / 09-09 18:25:12.775][0] audit_printk_skb: 51 callbacks suppressed
1618[ 38.203319 / 09-09 18:25:12.775][0] audit: type=1400 audit(1536517512.775:49): avc: denied { read write } for pid=465 comm="recovery" name="0" dev="devpts" ino=3 scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
1619[ 38.203356 / 09-09 18:25:12.775][0] audit: type=1400 audit(1536517512.775:50): avc: denied { open } for pid=465 comm="recovery" path="/dev/pts/0" dev="devpts" ino=3 scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
1620[ 38.203420 / 09-09 18:25:12.775][0] audit: type=1400 audit(1536517512.775:51): avc: denied { ioctl } for pid=465 comm="recovery" path="/dev/pts/0" dev="devpts" ino=3 ioctlcmd=540e scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
1621[ 38.214560 / 09-09 18:25:12.785][0] audit: type=1400 audit(1536517512.785:52): avc: denied { getattr } for pid=465 comm="sh" path="/dev/pts/0" dev="devpts" ino=3 scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
1622[ 39.402058 / 09-09 18:25:13.975][3] [Touch] 1 finger pressed:<0>( 295,1030, 55)
1623[ 39.501236 / 09-09 18:25:14.075][3] [Touch] finger released:<0>( 292,1020, 55)
1624[ 39.851738 / 09-09 18:25:14.425][3] [Touch] 1 finger pressed:<0>( 683, 804, 45)
1625[ 39.968520 / 09-09 18:25:14.535][3] [Touch] finger released:<0>( 674, 821, 45)
1626[ 40.260087 / 09-09 18:25:14.835][3] pet_watchdog
1627[ 40.334808 / 09-09 18:25:14.905][3] [Touch] 1 finger pressed:<0>( 356,1128, 45)
1628[ 40.451655 / 09-09 18:25:15.025][3] [Touch] finger released:<0>( 343,1146, 45)
1629[ 41.301091 / 09-09 18:25:15.875][3] [Touch] 1 finger pressed:<0>( 137,1145, 45)
1630[ 41.417942 / 09-09 18:25:15.985][3] [Touch] finger released:<0>( 137,1147, 45)
1631[ 43.722635 / 09-09 18:25:18.295][0] FG: fg_soc_irq_handler: triggered 0x21
1632[ 43.722669 / 09-09 18:25:18.295][0] FG: fg_soc_irq_handler: last_soc: 251
1633[ 43.722690 / 09-09 18:25:18.295][0] FG: fg_soc_irq_handler: power_supply_changed by soc_irq with msoc 251
1634[ 43.722736 / 09-09 18:25:18.295][0] FG: check_update_soc_lge_5level: [FG_DELTA]:SOC_Raw=0xFB,SOC_Origin=98,SOC_Scale_raw=10394,SOC_scale=100,SOC_5LEVEL_Raw=10394,SOC_5LEVEL=100,Voltage=4397,OCV=4338,current=-176,temp=29
1635[ 43.722749 / 09-09 18:25:18.295][0] FG: discharge_gain_work: Capacity: 100, medc_gain: 3 highc_gain: 2
1636[ 43.722861 / 09-09 18:25:18.295][0] FG: cc_soc_store_work: cc_soc_pct: 97 last_cc_soc: 264224702
1637[ 43.722926 / 09-09 18:25:18.295][0] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1638[ 43.722939 / 09-09 18:25:18.295][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1639[ 43.723629 / 09-09 18:25:18.295][0] FG: discharge_gain_work: Value [0 82] written to ki_coeff_medc
1640[ 43.724034 / 09-09 18:25:18.295][0] FG: discharge_gain_work: Value [0 80] written to ki_coeff_highc
1641[ 43.724151 / 09-09 18:25:18.295][0] FG: fg_config_esr_extract: ESR extract already enabled
1642[ 43.724163 / 09-09 18:25:18.295][0] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
1643[ 43.725526 / 09-09 18:25:18.295][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2359667, ocv=4338658, ibat=-138990, rbatt=337792
1644[ 43.726663 / 09-09 18:25:18.295][0] TIME-TO-FULL: lge_time_to_full_calc_work: Charger Connected chg_present = 1, prev_chg_present = 0
1645[ 43.726705 / 09-09 18:25:18.295][0] TIME-TO-FULL: lge_time_to_full_calc_work: Fully Charged...
1646[ 43.726995 / 09-09 18:25:18.295][0] TIME-TO-FULL: lge_time_to_full_cc_table_recovery: TTF CC Table Recovery
1647[ 43.727298 / 09-09 18:25:18.295][0] FG: fg_rslow_charge_comp_set: Activated rslow charge comp values
1648[ 43.727736 / 09-09 18:25:18.295][0] FG: update_cycle_count: batt_soc: f8 bucket: 7
1649[ 43.732166 / 09-09 18:25:18.305][0] FG: fg_backup_sram_registers: Backing SRAM registers
1650[ 43.734714 / 09-09 18:25:18.305][3] [Touch] 1 finger pressed:<0>( 135, 928, 40)
1651[ 43.736772 / 09-09 18:25:18.305][0] FG: update_sram_data: last_soc: 251 last_cc_soc: 264224702
1652[ 43.736821 / 09-09 18:25:18.305][0] FG: update_sram_data: soc:[100], soc_raw[9715], voltage:[4397099], ocv:[4338658], current:[-173033], batt_temp:[295], charge_raw [2333689 / 2402000]
1653[ 43.736836 / 09-09 18:25:18.305][0] SMBCHG: smbchg_vfloat_adjust_work: sample number = 0 vbat_mv = 4397 ibat_ua = -173033
1654[ 43.736847 / 09-09 18:25:18.305][0] SMBCHG: smbchg_vfloat_adjust_work: Skip 1 samples; max = 4397
1655[ 43.902009 / 09-09 18:25:18.475][3] [Touch] finger released:<0>( 147, 928, 44)
1656[ 43.986004 / 09-09 18:25:18.555][3] [Touch] 1 finger pressed:<0>( 209, 931, 45)
1657[ 44.134558 / 09-09 18:25:18.705][3] [Touch] finger released:<0>( 210, 935, 45)
1658[ 44.251628 / 09-09 18:25:18.825][3] [Touch] 1 finger pressed:<0>( 291,1060, 45)
1659[ 44.384843 / 09-09 18:25:18.955][3] [Touch] finger released:<0>( 279,1061, 45)
1660[ 44.820342 / 09-09 18:25:19.395][1] FG: update_temp_data: batt temp was changed !! 295 => 300
1661[ 46.501101 / 09-09 18:25:21.075][3] [Touch] 1 finger pressed:<0>( 248, 744, 40)
1662[ 46.635461 / 09-09 18:25:21.205][3] [Touch] finger released:<0>( 245, 746, 44)
1663[ 47.051890 / 09-09 18:25:21.625][3] [Touch] 1 finger pressed:<0>( 243, 751, 45)
1664[ 47.168637 / 09-09 18:25:21.735][3] [Touch] finger released:<0>( 244, 752, 45)
1665[ 47.785202 / 09-09 18:25:22.355][3] [Touch] 1 finger pressed:<0>( 252, 750, 45)
1666[ 47.918347 / 09-09 18:25:22.485][3] [Touch] finger released:<0>( 254, 753, 45)
1667[ 48.501320 / 09-09 18:25:23.075][3] [Touch] 1 finger pressed:<0>( 262, 738, 60)
1668[ 48.634558 / 09-09 18:25:23.205][3] [Touch] finger released:<0>( 262, 736, 60)
1669[ 50.280097 / 09-09 18:25:24.855][2] pet_watchdog
1670[ 52.334585 / 09-09 18:25:26.905][3] [Touch] 1 finger pressed:<0>( 624,1136, 45)
1671[ 52.684963 / 09-09 18:25:27.255][3] [Touch] finger released:<0>( 626,1145, 45)
1672[ 53.763990 / 09-09 18:25:28.335][0] FG: fg_backup_sram_registers: Backing SRAM registers
1673[ 53.768523 / 09-09 18:25:28.335][0] FG: update_sram_data: last_soc: 251 last_cc_soc: 264224702
1674[ 53.768574 / 09-09 18:25:28.335][0] FG: update_sram_data: soc:[100], soc_raw[9717], voltage:[4388096], ocv:[4338658], current:[-120391], batt_temp:[300], charge_raw [2334109 / 2402000]
1675[ 53.768588 / 09-09 18:25:28.335][0] SMBCHG: smbchg_vfloat_adjust_work: sample number = 1 vbat_mv = 4388 ibat_ua = -120391
1676[ 53.768599 / 09-09 18:25:28.335][0] SMBCHG: smbchg_vfloat_adjust_work: Skip 2 samples; max = 4397
1677[ 55.401656 / 09-09 18:25:29.975][3] [Touch] 1 finger pressed:<0>( 114,1107, 40)
1678[ 55.468774 / 09-09 18:25:30.035][3] [Touch] finger released:<0>( 122,1086, 40)
1679[ 55.867876 / 09-09 18:25:30.435][3] [Touch] 1 finger pressed:<0>( 304,1043, 55)
1680[ 55.984617 / 09-09 18:25:30.555][3] [Touch] finger released:<0>( 285,1035, 55)
1681[ 56.118140 / 09-09 18:25:30.685][3] [Touch] 1 finger pressed:<0>( 204, 916, 45)
1682[ 56.218430 / 09-09 18:25:30.785][3] [Touch] finger released:<0>( 204, 920, 45)
1683[ 56.601987 / 09-09 18:25:31.175][3] [Touch] 1 finger pressed:<0>( 324,1125, 45)
1684[ 56.702187 / 09-09 18:25:31.275][3] [Touch] finger released:<0>( 321,1131, 45)
1685[ 57.067941 / 09-09 18:25:31.635][3] [Touch] 1 finger pressed:<0>( 125,1155, 45)
1686[ 57.168271 / 09-09 18:25:31.735][3] [Touch] finger released:<0>( 125,1157, 45)
1687[ 57.584658 / 09-09 18:25:32.155][3] [Touch] 1 finger pressed:<0>( 126, 928, 45)
1688[ 57.668337 / 09-09 18:25:32.235][3] [Touch] finger released:<0>( 131, 931, 45)
1689[ 57.818134 / 09-09 18:25:32.385][3] [Touch] 1 finger pressed:<0>( 217, 922, 55)
1690[ 57.901873 / 09-09 18:25:32.475][3] [Touch] finger released:<0>( 216, 928, 55)
1691[ 58.018692 / 09-09 18:25:32.585][3] [Touch] 1 finger pressed:<0>( 292,1040, 45)
1692[ 58.135393 / 09-09 18:25:32.705][3] [Touch] finger released:<0>( 268,1043, 45)
1693[ 58.351298 / 09-09 18:25:32.925][3] [Touch] 1 finger pressed:<0>( 41, 925, 45)
1694[ 58.451626 / 09-09 18:25:33.025][3] [Touch] finger released:<0>( 42, 926, 45)
1695[ 58.734723 / 09-09 18:25:33.305][3] [Touch] 1 finger pressed:<0>( 254, 813, 45)
1696[ 58.851460 / 09-09 18:25:33.425][3] [Touch] finger released:<0>( 250, 823, 45)
1697[ 58.951884 / 09-09 18:25:33.525][3] [Touch] 1 finger pressed:<0>( 217, 921, 55)
1698[ 59.035676 / 09-09 18:25:33.605][3] [Touch] finger released:<0>( 207, 932, 55)
1699[ 59.718229 / 09-09 18:25:34.285][3] [Touch] 1 finger pressed:<0>( 665,1142, 55)
1700[ 59.768870 / 09-09 18:25:34.335][3] [Touch] finger released:<0>( 664,1145, 55)
1701[ 60.300092 / 09-09 18:25:34.875][3] pet_watchdog
1702[ 60.718279 / 09-09 18:25:35.285][3] [Touch] 1 finger pressed:<0>( 651, 941, 45)
1703[ 60.818476 / 09-09 18:25:35.385][3] [Touch] finger released:<0>( 649, 942, 45)
1704[ 61.234996 / 09-09 18:25:35.805][3] [Touch] 1 finger pressed:<0>( 117, 926, 45)
1705[ 61.280140 / 09-09 18:25:35.855][2] FG: fg_batt_print_work: [FG_INFO]:RS=0xFB, BS=97, QS=98, SOC=100, Rem=2353, Voltage=4388mV,OCV=4338mV, Current=-120mA, Temp=30, Age=100, cycle=0
1706[ 61.281662 / 09-09 18:25:35.855][3] SMBCHG: charging_information: [C], USB_PRESENT, USB_TYPE, CABLE_INFO, USBIN_VOL; BATT_FAKE, CURR_MAX_MODE, BATT_TEMP, BATT_SOC, BATT_VOL; PMI_IUSB_SET, PMI_IUSB_AICL, PMI_IBAT_SET, TOTAL_IBAT_NOW, CHGR_STS
1707[ 61.281683 / 09-09 18:25:35.855][3] SMBCHG: charging_information: [I], 1, USB, OPEN, 4889; FAKE_OFF, CURR_MAX_OFF, 30, 100, 4388; 500, 1500, 900, -120, 0x85
1708[ 61.351741 / 09-09 18:25:35.925][3] [Touch] finger released:<0>( 117, 934, 45)
1709[ 61.440099 / 09-09 18:25:36.015][1] TIME-TO-FULL: lge_time_to_full_report_work: TTF Report Work...
1710[ 61.445189 / 09-09 18:25:36.015][1] [TM][I] XO=32, QUIET=30, VTS=301
1711[ 61.751906 / 09-09 18:25:36.325][3] [Touch] 1 finger pressed:<0>( 663,1125, 60)
1712[ 61.834634 / 09-09 18:25:36.405][3] [Touch] finger released:<0>( 663,1133, 60)
1713[ 63.783999 / 09-09 18:25:38.355][0] FG: fg_backup_sram_registers: Backing SRAM registers
1714[ 63.788525 / 09-09 18:25:38.355][0] FG: update_sram_data: last_soc: 251 last_cc_soc: 264224702
1715[ 63.788575 / 09-09 18:25:38.355][0] FG: update_sram_data: soc:[100], soc_raw[9719], voltage:[4397099], ocv:[4338658], current:[-180815], batt_temp:[300], charge_raw [2334519 / 2402000]
1716[ 63.788589 / 09-09 18:25:38.355][0] SMBCHG: smbchg_vfloat_adjust_work: sample number = 2 vbat_mv = 4397 ibat_ua = -180815
1717[ 63.788600 / 09-09 18:25:38.355][0] SMBCHG: smbchg_vfloat_adjust_work: Skip 3 samples; max = 4397
1718[ 64.802994 / 09-09 18:25:39.375][2] FG: fg_backup_sram_registers: Backing SRAM registers
1719[ 64.806300 / 09-09 18:25:39.375][2] FG: update_sram_data: last_soc: 251 last_cc_soc: 264224702
1720[ 64.806356 / 09-09 18:25:39.375][2] FG: update_sram_data: soc:[100], soc_raw[9719], voltage:[4397099], ocv:[4338658], current:[-170897], batt_temp:[300], charge_raw [2334589 / 2402000]
1721[ 66.240077 / 09-09 18:25:40.815][1] LGE charging scenario V2: state 0 -> 0(0-0), temp=300, volt=4397, BTM=0, charger=1, cur_set=900/900, chg_cur = -170
1722[ 66.240090 / 09-09 18:25:40.815][1] SMBCHG: smbchg_monitor_batt_volt_for_iusb: uv = 4397099 decrease_iusb = 0
1723[ 66.240102 / 09-09 18:25:40.815][1] SMBCHG: smbchg_monitor_batt_volt_for_iusb: batt_volt = 4397099 chg_type = 4 lcd on/off = 1
1724[ 66.240114 / 09-09 18:25:40.815][1] SMBCHG: smbchg_monitor_batt_temp: batt temp = 300, batt volt = 4397099, pre_otp_ibat = 900, otp_ibat = 900
1725[ 69.335555 / 09-09 18:25:43.915][3] [Touch] 1 finger pressed:<0>( 648, 923, 45)
1726[ 69.434680 / 09-09 18:25:44.005][2] [Touch] finger released:<0>( 633, 937, 45)
1727[ 70.320090 / 09-09 18:25:44.895][3] pet_watchdog
1728[ 72.135281 / 09-09 18:25:46.715][2] [Touch] 1 finger pressed:<0>( 129, 955, 45)
1729[ 72.284981 / 09-09 18:25:46.855][2] [Touch] finger released:<0>( 137, 955, 45)
1730[ 72.734593 / 09-09 18:25:47.305][2] [Touch] 1 finger pressed:<0>( 306,1114, 55)
1731[ 72.867872 / 09-09 18:25:47.435][2] [Touch] finger released:<0>( 304,1116, 55)
1732[ 73.803993 / 09-09 18:25:48.375][0] FG: fg_backup_sram_registers: Backing SRAM registers
1733[ 73.808518 / 09-09 18:25:48.375][0] FG: update_sram_data: last_soc: 251 last_cc_soc: 264224702
1734[ 73.808569 / 09-09 18:25:48.375][0] FG: update_sram_data: soc:[100], soc_raw[9720], voltage:[4378178], ocv:[4338658], current:[-89568], batt_temp:[300], charge_raw [2334934 / 2402000]
1735[ 73.808583 / 09-09 18:25:48.375][0] SMBCHG: smbchg_vfloat_adjust_work: Skip ibat too high: -89568
1736[ 74.284880 / 09-09 18:25:48.855][2] [Touch] 1 finger pressed:<0>( 137,1136, 45)
1737[ 74.385098 / 09-09 18:25:48.955][2] [Touch] finger released:<0>( 137,1136, 45)
1738[ 75.584980 / 09-09 18:25:50.155][2] [Touch] 1 finger pressed:<0>( 254, 742, 40)
1739[ 75.752226 / 09-09 18:25:50.325][2] [Touch] finger released:<0>( 253, 745, 46)
1740[ 76.235071 / 09-09 18:25:50.805][2] [Touch] 1 finger pressed:<0>( 244, 757, 45)
1741[ 76.384733 / 09-09 18:25:50.955][2] [Touch] finger released:<0>( 246, 755, 45)
1742[ 80.340103 / 09-09 18:25:54.915][2] pet_watchdog
1743[ 83.823985 / 09-09 18:25:58.395][0] FG: fg_backup_sram_registers: Backing SRAM registers
1744[ 83.828507 / 09-09 18:25:58.395][0] FG: update_sram_data: last_soc: 251 last_cc_soc: 264224702
1745[ 83.828557 / 09-09 18:25:58.395][0] FG: update_sram_data: soc:[100], soc_raw[9722], voltage:[4397099], ocv:[4338658], current:[-166625], batt_temp:[300], charge_raw [2335368 / 2402000]
1746[ 83.828572 / 09-09 18:25:58.395][0] SMBCHG: smbchg_vfloat_adjust_work: sample number = 3 vbat_mv = 4397 ibat_ua = -166625
1747[ 83.828582 / 09-09 18:25:58.395][0] SMBCHG: smbchg_vfloat_adjust_work: Skip 4 samples; max = 4397
1748[ 87.418612 / 09-09 18:26:01.995][2] [Touch] 1 finger pressed:<0>( 176, 813, 45)
1749[ 87.535187 / 09-09 18:26:02.105][2] [Touch] finger released:<0>( 173, 820, 45)
1750[ 87.801921 / 09-09 18:26:02.375][2] [Touch] 1 finger pressed:<0>( 200,1053, 45)
1751[ 87.935237 / 09-09 18:26:02.505][2] [Touch] finger released:<0>( 203,1059, 45)
1752[ 88.201537 / 09-09 18:26:02.775][2] [Touch] 1 finger pressed:<0>( 314, 834, 45)
1753[ 88.318326 / 09-09 18:26:02.885][2] [Touch] finger released:<0>( 315, 834, 45)
1754[ 88.467986 / 09-09 18:26:03.035][2] [Touch] 1 finger pressed:<0>( 249, 835, 45)
1755[ 88.518653 / 09-09 18:26:03.085][2] [Touch] finger released:<0>( 248, 835, 45)
1756[ 89.251983 / 09-09 18:26:03.825][2] [Touch] 1 finger pressed:<0>( 667,1068, 45)
1757[ 89.352224 / 09-09 18:26:03.925][2] [Touch] finger released:<0>( 664,1069, 45)
1758[ 90.360085 / 09-09 18:26:04.935][2] pet_watchdog
1759[ 91.360081 / 09-09 18:26:05.935][2] FG: fg_batt_print_work: [FG_INFO]:RS=0xFB, BS=97, QS=98, SOC=100, Rem=2353, Voltage=4397mV,OCV=4338mV, Current=-166mA, Temp=30, Age=100, cycle=0
1760[ 91.468408 / 09-09 18:26:06.045][2] [Touch] 1 finger pressed:<0>( 252, 738, 40)
1761[ 91.568679 / 09-09 18:26:06.135][2] [Touch] finger released:<0>( 247, 743, 40)
1762[ 92.701977 / 09-09 18:26:07.275][2] [Touch] 1 finger pressed:<0>( 259, 725, 55)
1763[ 92.802437 / 09-09 18:26:07.375][2] [Touch] finger released:<0>( 259, 726, 55)
1764[ 93.235235 / 09-09 18:26:07.805][2] [Touch] 1 finger pressed:<0>( 250, 751, 45)
1765[ 93.368671 / 09-09 18:26:07.935][2] [Touch] finger released:<0>( 250, 751, 45)
1766[ 93.840119 / 09-09 18:26:08.415][0] SMBCHG: smbchg_vfloat_adjust_work: Stopping vfloat adj taper=0 parallel_ma = 0
1767[ 94.882999 / 09-09 18:26:09.455][2] FG: fg_backup_sram_registers: Backing SRAM registers
1768[ 94.886286 / 09-09 18:26:09.455][2] FG: update_sram_data: last_soc: 251 last_cc_soc: 264224702
1769[ 94.886343 / 09-09 18:26:09.455][2] FG: update_sram_data: soc:[100], soc_raw[9723], voltage:[4377568], ocv:[4338658], current:[-83922], batt_temp:[300], charge_raw [2335685 / 2402000]
1770[ 95.484915 / 09-09 18:26:10.055][2] [Touch] 1 finger pressed:<0>( 661,1040, 45)
1771[ 98.001240 / 09-09 18:26:12.575][2] [Touch] finger released:<0>( 648,1028, 62)
1772[ 100.380087 / 09-09 18:26:14.955][2] pet_watchdog
1773[ 101.118388 / 09-09 18:26:15.695][2] [Touch] 1 finger pressed:<0>( 287,1035, 45)
1774[ 101.251758 / 09-09 18:26:15.825][2] [Touch] finger released:<0>( 275,1031, 45)
1775[ 101.518580 / 09-09 18:26:16.085][2] [Touch] 1 finger pressed:<0>( 43, 933, 40)
1776[ 101.635669 / 09-09 18:26:16.205][2] [Touch] finger released:<0>( 43, 933, 40)
1777[ 101.985073 / 09-09 18:26:16.555][2] [Touch] 1 finger pressed:<0>( 332, 830, 45)
1778[ 102.085460 / 09-09 18:26:16.655][2] [Touch] finger released:<0>( 331, 832, 45)
1779[ 102.368564 / 09-09 18:26:16.935][2] [Touch] 1 finger pressed:<0>( 297,1155, 55)
1780[ 102.468737 / 09-09 18:26:17.035][2] [Touch] finger released:<0>( 297,1155, 55)
1781[ 104.151829 / 09-09 18:26:18.725][2] [Touch] 1 finger pressed:<0>( 127,1153, 45)
1782[ 104.352471 / 09-09 18:26:18.925][2] [Touch] finger released:<0>( 129,1153, 45)
1783[ 107.335564 / 09-09 18:26:21.915][2] [Touch] 1 finger pressed:<0>( 676,1048, 45)
1784[ 108.651352 / 09-09 18:26:23.225][2] [Touch] finger released:<0>( 661,1040, 50)
1785[ 110.151308 / 09-09 18:26:24.725][2] [Touch] 1 finger pressed:<0>( 141,1234, 55)
1786[ 110.201987 / 09-09 18:26:24.775][2] [Touch] finger released:<0>( 140,1233, 55)
1787[ 110.368541 / 09-09 18:26:24.935][2] [Touch] 1 finger pressed:<0>( 156,1240, 45)
1788[ 110.400105 / 09-09 18:26:24.975][1] pet_watchdog
1789[ 110.418212 / 09-09 18:26:24.985][2] [Touch] finger released:<0>( 155,1238, 45)
1790[ 110.518333 / 09-09 18:26:25.085][2] [Touch] 1 finger pressed:<0>( 157,1247, 45)
1791[ 110.567972 / 09-09 18:26:25.135][2] [Touch] finger released:<0>( 158,1247, 45)
1792[ 111.618916 / 09-09 18:26:26.195][2] [Touch] 1 finger pressed:<0>( 151,1210, 60)
1793[ 111.668359 / 09-09 18:26:26.235][2] [Touch] finger released:<0>( 150,1211, 60)
1794[ 112.318735 / 09-09 18:26:26.885][2] [Touch] 1 finger pressed:<0>( 510,1030, 45)
1795[ 112.401212 / 09-09 18:26:26.975][2] [Touch] finger released:<0>( 512,1028, 50)
1796[ 112.569300 / 09-09 18:26:27.135][0] FG: fg_soc_irq_handler: triggered 0x21
1797[ 112.569334 / 09-09 18:26:27.135][0] FG: fg_soc_irq_handler: last_soc: 252
1798[ 112.569355 / 09-09 18:26:27.135][0] FG: fg_soc_irq_handler: power_supply_changed by soc_irq with msoc 252
1799[ 112.569396 / 09-09 18:26:27.135][0] FG: check_update_soc_lge_5level: [FG_DELTA]:SOC_Raw=0xFC,SOC_Origin=98,SOC_Scale_raw=10435,SOC_scale=100,SOC_5LEVEL_Raw=10435,SOC_5LEVEL=100,Voltage=4377,OCV=4338,current=-83,temp=30
1800[ 112.569408 / 09-09 18:26:27.135][0] FG: discharge_gain_work: Capacity: 100, medc_gain: 3 highc_gain: 2
1801[ 112.569520 / 09-09 18:26:27.135][0] FG: cc_soc_store_work: cc_soc_pct: 97 last_cc_soc: 265277390
1802[ 112.569585 / 09-09 18:26:27.135][0] SMBCHG: smbchg_external_power_changed: usb type = SDP current_limit = 500
1803[ 112.569598 / 09-09 18:26:27.135][0] SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
1804[ 112.570305 / 09-09 18:26:27.145][0] FG: discharge_gain_work: Value [0 82] written to ki_coeff_medc
1805[ 112.570423 / 09-09 18:26:27.145][0] FG: fg_config_esr_extract: ESR extract already enabled
1806[ 112.570435 / 09-09 18:26:27.145][0] FG: fg_config_imptr_pulse: imptr_pulse_slow is disabled already
1807[ 112.570700 / 09-09 18:26:27.145][0] FG: discharge_gain_work: Value [0 80] written to ki_coeff_highc
1808[ 112.570974 / 09-09 18:26:27.145][0] SMBCHG: smbchg_calc_max_flash_current: avail_iflash=2326578, ocv=4338658, ibat=-50850, rbatt=334619
1809[ 112.571963 / 09-09 18:26:27.145][0] FG: update_cycle_count: batt_soc: f8 bucket: 7
1810[ 112.575820 / 09-09 18:26:27.145][0] FG: fg_backup_sram_registers: Backing SRAM registers
1811[ 112.580359 / 09-09 18:26:27.155][0] FG: update_sram_data: last_soc: 252 last_cc_soc: 265277390
1812[ 112.580408 / 09-09 18:26:27.155][0] FG: update_sram_data: soc:[100], soc_raw[9726], voltage:[4378483], ocv:[4338658], current:[-80260], batt_temp:[305], charge_raw [2336245 / 2402000]
1813[ 112.580421 / 09-09 18:26:27.155][0] SMBCHG: smbchg_vfloat_adjust_work: Skip ibat too high: -80260
1814[ 113.234911 / 09-09 18:26:27.805][2] [Touch] 1 finger pressed:<0>( 182, 323, 55)
1815[ 113.335053 / 09-09 18:26:27.905][2] [Touch] finger released:<0>( 176, 337, 55)
1816[ 113.481549 / 09-09 18:26:28.055][0] EXT4-fs (mmcblk0p54): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
1817[ 113.482357 / 09-09 18:26:28.055][0] audit: type=1400 audit(1536517588.055:53): avc: denied { write } for pid=342 comm="recovery" name=".twrps" dev="mmcblk0p54" ino=37 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
1818[ 113.482829 / 09-09 18:26:28.055][0] audit: type=1400 audit(1536517588.055:54): avc: denied { setattr } for pid=342 comm="recovery" name=".twrps" dev="mmcblk0p54" ino=37 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
1819[ 113.557895 / 09-09 18:26:28.125][0] SysRq : Emergency Remount R/O
1820[ 113.562592 / 09-09 18:26:28.135][1] EXT4-fs (mmcblk0p54): re-mounted. Opts: (null)
1821[ 113.566268 / 09-09 18:26:28.135][1] EXT4-fs (mmcblk0p59): re-mounted. Opts: (null)
1822[ 113.566335 / 09-09 18:26:28.135][1] Emergency Remount complete
1823[ 113.661522 / 09-09 18:26:28.235][1] msm_thermal:msm_thermal_update_freq Freq mitigation task is not initialized
1824[ 113.667308 / 09-09 18:26:28.235][0] mdss_fb_release_all: try to close unopened fb 1! from pid:1 name:init
1825[ 113.667351 / 09-09 18:26:28.235][0] mdss_fb_blank_sub: mdss_fb_release_all+0x2cc/0x378 mode:4
1826[ 113.667414 / 09-09 18:26:28.235][0] mdss_mdp_overlay_release: Unable to unset pipe(s) ndx=0x8 unset=0x0
1827[ 113.676833 / 09-09 18:26:28.245][0] lge_set_display_power_ctrl: display_power_ctrl [0]
1828[ 113.970276 / 09-09 18:26:28.545][0] tcl_ft8006m_mdss_dsi_panel_reset: skip panel reset low
1829[ 113.970301 / 09-09 18:26:28.545][0] tcl_ft8006m_mdss_dsi_panel_power_off: keep panel power for lpwg mode
1830[ 113.971511 / 09-09 18:26:28.545][0] mdss_fb_blank_sub: -
1831[ 114.121754 / 09-09 18:26:28.695][0] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x1a (ok)
1832[ 114.126972 / 09-09 18:26:28.695][0] [Touch] ft8006m_notify_normal event=0x20
1833[ 114.126983 / 09-09 18:26:28.695][0] [Touch] LCD_EVENT_TOUCH_RESET_START!
1834[ 114.126994 / 09-09 18:26:28.695][0] [Touch] touch_gpio_direction_output - pin:64, value:0
1835[ 114.127008 / 09-09 18:26:28.695][0] tcl_ft8006m_mdss_dsi_ctrl_shutdown:reset to low
1836[ 114.132065 / 09-09 18:26:28.715][0] tcl_ft8006m_mdss_dsi_ctrl_shutdown: turn panel shutdown
1837[ 114.132407 / 09-09 18:26:28.715][0] FG: fg_shutdown: FG shutdown started
1838[ 114.134680 / 09-09 18:26:28.715][0] FG: fg_rslow_charge_comp_clear: Cleared rslow charge comp values
1839[ 114.135014 / 09-09 18:26:28.715][0] reboot: Restarting system with command ''
1840[ 114.135031 / 09-09 18:26:28.715][0] Going down for restart now (pid: 1, comm: init)
1841[ 114.135044 / 09-09 18:26:28.715][0] The device will be warm reset
1842[ 114.135611 / 09-09 18:26:28.715][0] qcom,qpnp-power-on qpnp-power-on-13: PMIC@SID2: configuring PON for reset