· 9 years ago · Jan 21, 2017, 10:16 AM
1<6>[ 0.000000]@0 Initializing cgroup subsys cpu
2<6>[ 0.000000]@0 Initializing cgroup subsys cpuacct
3<5>[ 0.000000]@0 Linux version 3.18.31-twrp-3.0 (jc@westerley) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP PREEMPT Sat Jan 21 00:54:44 EST 2017
4<4>[ 0.000000]@0 CPU: AArch64 Processor [512f2011] revision 1
5<6>[ 0.000000]@0 alternatives: detected feature GIC system register CPU interface
6<6>[ 0.000000]@0 Machine: Qualcomm Technologies, Inc. MSM 8996pro + PMI8996 MTP
7<6>[ 0.000000]@0 efi: Getting EFI parameters from FDT:
8<6>[ 0.000000]@0 efi: UEFI not found.
9<6>[ 0.000000]@0 Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB
10<6>[ 0.000000]@0 Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 45 MiB
11<6>[ 0.000000]@0 Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 98 MiB
12<6>[ 0.000000]@0 Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB
13<6>[ 0.000000]@0 Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
14<6>[ 0.000000]@0 Reserved memory: reserved region for node 'ramoops_mem@ac000000': base 0x00000000ac000000, size 2 MiB
15<6>[ 0.000000]@0 Reserved memory: reserved region for node 'param_mem@ac200000': base 0x00000000ac200000, size 1 MiB
16<6>[ 0.000000]@0 Reserved memory: reserved region for node 'bootloader_log_mem@ac300000': base 0x00000000ac300000, size 1 MiB
17<6>[ 0.000000]@0 Reserved memory: reserved region for node 'mtp_mem@ac400000': base 0x00000000ac400000, size 1 MiB
18<6>[ 0.000000]@0 Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
19<6>[ 0.000000]@0 Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB
20<6>[ 0.000000]@0 Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
21<6>[ 0.000000]@0 Removed memory: created DMA memory pool at 0x000000008ea00000, size 45 MiB
22<6>[ 0.000000]@0 Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
23<6>[ 0.000000]@0 Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
24<6>[ 0.000000]@0 Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
25<6>[ 0.000000]@0 Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
26<6>[ 0.000000]@0 Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
27<6>[ 0.000000]@0 Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
28<6>[ 0.000000]@0 Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
29<6>[ 0.000000]@0 Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
30<6>[ 0.000000]@0 Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
31<6>[ 0.000000]@0 Reserved memory: initialized node secure_region, compatible id shared-dma-pool
32<6>[ 0.000000]@0 Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB
33<6>[ 0.000000]@0 Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
34<6>[ 0.000000]@0 cma: Reserved 32 MiB at 0x00000000f6800000
35<7>[ 0.000000]@0 On node 0 totalpages: 1514064
36<7>[ 0.000000]@0 DMA zone: 11524 pages used for memmap
37<7>[ 0.000000]@0 DMA zone: 0 pages reserved
38<7>[ 0.000000]@0 DMA zone: 737536 pages, LIFO batch:31
39<7>[ 0.000000]@0 Normal zone: 12134 pages used for memmap
40<7>[ 0.000000]@0 Normal zone: 776528 pages, LIFO batch:31
41<6>[ 0.000000]@0 psci: probing for conduit method from DT.
42<6>[ 0.000000]@0 psci: PSCIv1.0 detected in firmware.
43<6>[ 0.000000]@0 psci: Using standard PSCI v0.2 function IDs
44<6>[ 0.000000]@0 psci: Initializing psci_cpu_init
45<6>[ 0.000000]@0 psci: Initializing psci_cpu_init
46<6>[ 0.000000]@0 psci: Initializing psci_cpu_init
47<6>[ 0.000000]@0 PERCPU: Embedded 13 pages/cpu @ffffffc17d717000 s22656 r0 d30592 u53248
48<7>[ 0.000000]@0 pcpu-alloc: s22656 r0 d30592 u53248 alloc=13*4096
49<7>[ 0.000000]@0 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
50<4>[ 0.000000]@0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1490406
51<5>[ 0.000000]@0 Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom androidboot.bootdevice=624000.ufshc androidboot.selinux=permissive user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff enforcing=0 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=logging androidboot.keymaster=1 androidboot.serialno=d1fb6b58 gpt androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3fa5_1080p_cmd:1:none:cfg:single_dsi fpsimd.fpsimd_settings=0 app_setting.use_app_setting=0 androidboot.mode=recovery androidboot.ftm_mode=ftm_recovery androidboot.project_name=15811 androidboot.selinux=permissive androidboot.rf_version=22 androidboot.hw_version=28 ddr_manufacture_info=Samsung ddr_row0_info=16 androidboot.pcba_number=001581206C14032000002602 androidboot.enable_dm_verity=1 androidboot.secboot=e<6>PID hash table entries: 4096 (order: 3, 32768 bytes)
52<6>[ 0.000000]@0 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
53<6>[ 0.000000]@0 Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
54<4>[ 0.000000]@0 Memory: 5687748K/6056256K available (8620K kernel code, 1119K rwdata, 2080K rodata, 396K init, 3616K bss, 368508K reserved)
55<5>[ 0.000000]@0 Virtual kernel memory layout:
56<5> vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
57<5> vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
58<5> 0xffffffbdc0000000 - 0xffffffbdc5f65400 ( 95 MB actual)
59<5> PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
60<5> fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
61<5> modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
62<5> memory : 0xffffffc000000000 - 0xffffffc17d950000 ( 6105 MB)
63<5> .init : 0xffffffc000af6000 - 0xffffffc000b59000 ( 396 KB)
64<5> .text : 0xffffffc000080000 - 0xffffffc000af5384 ( 10709 KB)
65<5> .data : 0xffffffc000b71000 - 0xffffffc000c88c00 ( 1119 KB)
66<6>[ 0.000000]@0 SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
67<6>[ 0.000000]@0 HMP scheduling enabled.
68<6>[ 0.000000]@0 Preemptible hierarchical RCU implementation.
69<6>[ 0.000000]@0 RCU dyntick-idle grace-period acceleration is enabled.
70<6>[ 0.000000]@0 NR_IRQS:64 nr_irqs:64 0
71<6>[ 0.000000]@0 CPU0: found redistributor 0 region 0:0x0000000009c00000
72<4>[ 0.000000]@0 mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
73<3>[ 0.000000]@0 MPM 1 irq mapping errored -517
74<6>[ 0.000000]@0 Offload RCU callbacks from all CPUs
75<6>[ 0.000000]@0 Offload RCU callbacks from CPUs: 0-3.
76<6>[ 0.000000]@0 Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
77<6>[ 0.000000]@0 sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
78<6>[ 0.000015]@0 Switched to clocksource arch_sys_counter
79<6>[ 0.000632]@0 Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
80<6>[ 0.000644]@0 pid_max: default: 32768 minimum: 301
81<6>[ 0.000704]@0 Security Framework initialized
82<6>[ 0.000718]@0 SELinux: Initializing.
83<7>[ 0.000741]@0 SELinux: Starting in permissive mode
84<6>[ 0.000773]@0 Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
85<6>[ 0.000782]@0 Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
86<6>[ 0.001239]@0 Initializing cgroup subsys freezer
87<4>[ 0.001500]@0 /cpus/cpu@0: Unknown CPU type
88<4>[ 0.001509]@0 /cpus/cpu@1: Unknown CPU type
89<4>[ 0.001518]@0 /cpus/cpu@100: Unknown CPU type
90<4>[ 0.001527]@0 /cpus/cpu@101: Unknown CPU type
91<6>[ 0.001534]@0 hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
92<6>[ 0.001549]@0 EFI services will not be available.
93<4>[ 0.009270]@0 NOHZ: local_softirq_pending 02
94<4>[ 0.010868]@0
95<4>**********************************************************
96<4>[ 0.010879]@0 ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
97<4>[ 0.010883]@0 ** **
98<4>[ 0.010888]@0 ** trace_printk() being used. Allocating extra memory. **
99<4>[ 0.010892]@0 ** **
100<4>[ 0.010896]@0 ** This means that this is a DEBUG kernel and it is **
101<4>[ 0.010900]@0 ** unsafe for produciton use. **
102<4>[ 0.010904]@0 ** **
103<4>[ 0.010908]@0 ** If you see this message and you are not debugging **
104<4>[ 0.010912]@0 ** the kernel, report this immediately to your vendor! **
105<4>[ 0.010916]@0 ** **
106<4>[ 0.010919]@0 ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
107<4>[ 0.010923]@0 **********************************************************
108<6>[ 0.012587]@0 MSM Memory Dump base table set up
109<6>[ 0.012613]@0 MSM Memory Dump apps data table set up
110<3>[ 0.012623]@0 hyp_assign_table is not functional as qcom_secure_mem is not allocated.
111<6>[ 0.012836]@0 clock-cpu-8996: configuring clocks for the perf cluster
112<6>[ 0.012974]@0 cpu_clock_8996_early_init: finished CPU clock configuration
113<6>[ 0.015468]@1 CPU1: found redistributor 1 region 0:0x0000000009c40000
114<6>[ 0.017997]@2 CPU2: found redistributor 100 region 0:0x0000000009c80000
115<6>[ 0.020393]@3 CPU3: found redistributor 101 region 0:0x0000000009cc0000
116<6>[ 0.020534]@0 Brought up 4 CPUs
117<6>[ 0.020552]@0 SMP: Total of 4 processors activated.
118<6>[ 0.023693]@0 DMI not present or invalid.
119<6>[ 0.030800]@2 pinctrl core: initialized pinctrl subsystem
120<6>[ 0.031148]@2 regulator-dummy: no parameters
121<6>[ 0.085840]@2 NET: Registered protocol family 16
122<6>[ 0.100098]@2 cpuidle: using governor ladder
123<6>[ 0.120076]@2 cpuidle: using governor menu
124<6>[ 0.140089]@2 cpuidle: using governor qcom
125<6>[ 0.140783]@2 vdso: 2 pages (1 code @ ffffffc000b79000, 1 data @ ffffffc000b78000)
126<6>[ 0.141237]@2 software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc0bfc00000-ffffffc0bfffffff]
127<6>[ 0.142001]@2 DMA: preallocated 256 KiB pool for atomic allocations
128<6>[ 0.144442]@2 kernel boot_mode = normal[0]
129<6>[ 0.155536]@2 sps:sps is ready.
130<6>[ 0.156071]@2 i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_12/i2c_12_active, deferring probe
131<6>[ 0.156700]@2 i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_active, deferring probe
132<6>[ 0.156952]@2 i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe
133<6>[ 0.157210]@2 i2c-msm-v2 7577000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_3/i2c_3_active, deferring probe
134<6>[ 0.157460]@2 i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
135<4>[ 0.157831]@2 irq: no irq domain found for /soc/pinctrl@01010000 !
136<3>[ 0.159314]@2 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
137<3>[ 0.182566]@2 smd_channel_probe_now: allocation table not initialized
138<3>[ 0.182830]@2 smd_channel_probe_now: allocation table not initialized
139<3>[ 0.183077]@2 smd_channel_probe_now: allocation table not initialized
140<3>[ 0.183332]@2 smd_channel_probe_now: allocation table not initialized
141<6>[ 0.183551]@2 msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
142<6>[ 0.183780]@2 msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
143<6>[ 0.184436]@2 msm_rpm_dev_probe: APSS-RPM communication over GLINK
144<3>[ 0.191985]@2 spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
145<3>[ 0.193365]@2 spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
146<6>[ 0.197633]@2 pmi8994_s2: 400 <--> 1065 mV at 1000 mV normal idle
147<6>[ 0.198234]@2 platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
148<6>[ 0.198485]@2 platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
149<6>[ 0.198889]@2 platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
150<6>[ 0.199204]@2 platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
151<6>[ 0.201686]@2 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
152<6>[ 0.201708]@2 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
153<6>[ 0.201727]@2 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
154<6>[ 0.201739]@2 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
155<6>[ 0.201791]@2 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
156<3>[ 0.201798]@2 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
157<6>[ 0.201806]@2 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
158<3>[ 0.201814]@2 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
159<6>[ 0.206353]@2 platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
160<3>[ 0.209545]@0 smd_channel_probe_now: allocation table not initialized
161<6>[ 0.209736]@1 msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
162<6>[ 0.210547]@3 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
163<6>[ 0.210642]@3 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
164<6>[ 0.210796]@3 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
165<6>[ 0.211035]@3 msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
166<6>[ 0.214908]@3 console [pstore-1] enabled
167<6>[ 0.215022]@3 pstore: Registered ramoops as persistent store backend
168<6>[ 0.215033]@3 ramoops: attached 0x200000@0xac000000, ecc: 0/0
169<3>[ 0.215164]@3 XCB bootloader_log_probe
170<6>[ 0.215371]@3 bootloader_log!
171<6>[ 0.216310]@3 apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
172<6>[ 0.216673]@3 apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
173<6>[ 0.216987]@3 apcc_l3_mem_acc_corner: 0 <--> 0 mV
174<6>[ 0.217312]@3 gfx_mem_acc_corner: 0 <--> 0 mV
175<6>[ 0.217690]@3 kryo0-retention: 468 <--> 892 mV at 520 mV
176<6>[ 0.217885]@3 kryo0: 468 <--> 892 mV at 754 mV
177<6>[ 0.218024]@3 kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
178<6>[ 0.218313]@3 kryo1-retention: 468 <--> 892 mV at 520 mV
179<6>[ 0.218503]@3 kryo1: 468 <--> 892 mV at 754 mV
180<6>[ 0.218645]@3 kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
181<6>[ 0.222933]@2 platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
182<3>[ 0.224202]@2 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
183<4>[ 0.241815]@3 __of_mpm_init(): MPM driver mapping exists
184<6>[ 0.243641]@3 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
185<3>[ 0.243789]@3 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
186<3>[ 0.243803]@3 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
187<6>[ 0.244112]@3 i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
188<3>[ 0.244170]@3 i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
189<3>[ 0.244183]@3 i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
190<6>[ 0.244476]@3 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
191<3>[ 0.244530]@3 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
192<3>[ 0.244542]@3 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
193<6>[ 0.244826]@3 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
194<3>[ 0.244881]@3 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
195<3>[ 0.244892]@3 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
196<6>[ 0.245140]@3 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
197<3>[ 0.245194]@3 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
198<3>[ 0.245205]@3 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
199<3>[ 0.245353]@3 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
200<6>[ 0.246085]@3 pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
201<6>[ 0.246513]@3 pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
202<6>[ 0.246867]@3 pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
203<6>[ 0.247293]@3 pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
204<6>[ 0.247640]@3 pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
205<6>[ 0.248058]@3 pm8994_s3: 1300 mV normal idle
206<6>[ 0.248459]@3 pm8994_s4: 1800 mV normal idle
207<6>[ 0.248871]@3 pm8994_s5: 2150 mV normal idle
208<6>[ 0.249273]@3 pm8994_s7: 800 mV normal idle
209<6>[ 0.249685]@3 pm8994_l1: 1000 mV normal idle
210<6>[ 0.250147]@3 pm8994_l2: 1250 mV normal idle
211<6>[ 0.250784]@3 pm8994_l3: 1100 mV normal idle
212<6>[ 0.251191]@3 pm8994_l4: 1225 mV normal idle
213<6>[ 0.251600]@3 pm8994_l6: 1200 mV normal idle
214<6>[ 0.251995]@3 pm8994_l8: 1800 mV normal idle
215<6>[ 0.252409]@3 pm8994_l9: 1800 mV normal idle
216<6>[ 0.252808]@3 pm8994_l10: 1800 mV normal idle
217<6>[ 0.253220]@3 pm8994_l11: 1150 mV normal idle
218<6>[ 0.253627]@3 pm8994_l12: 1800 mV normal idle
219<6>[ 0.254379]@3 pm8994_l13: 29500 <--> 2950 mV at 2950 mV normal idle
220<6>[ 0.254791]@3 pm8994_l15: 1800 mV normal idle
221<6>[ 0.255195]@3 pm8994_l16: 2700 mV normal idle
222<6>[ 0.255605]@3 pm8994_l17: 2600 mV normal idle
223<6>[ 0.256007]@3 pm8994_l18: 3300 mV normal idle
224<6>[ 0.256423]@3 pm8994_l19: 3000 mV normal idle
225<6>[ 0.256825]@3 pm8994_l20: 2950 mV normal idle
226<6>[ 0.257238]@3 pm8994_l21: 2950 mV normal idle
227<6>[ 0.257640]@3 pm8994_l22: 3000 <--> 3300 mV at 3000 mV normal idle
228<6>[ 0.258048]@3 pm8994_l23: 2800 mV normal idle
229<6>[ 0.258445]@3 pm8994_l24: 3075 mV normal idle
230<6>[ 0.258856]@3 pm8994_l25: 1200 mV normal idle
231<6>[ 0.259506]@3 pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
232<6>[ 0.259867]@3 pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
233<6>[ 0.260319]@3 pm8994_l27: 1000 <--> 1200 mV at 1030 mV normal idle
234<6>[ 0.260736]@3 pm8994_l28: 925 mV normal idle
235<6>[ 0.261358]@3 pm8994_l29: 2800 mV normal idle
236<6>[ 0.261775]@3 pm8994_l30: 1800 mV normal idle
237<6>[ 0.262188]@3 pm8994_l32: 1800 mV normal idle
238<6>[ 0.262599]@3 pm8994_lvs1: no parameters
239<6>[ 0.262963]@3 pm8994_lvs2: no parameters
240<6>[ 0.263348]@3 pmi8994_s1: 1025 mV normal idle
241<6>[ 0.263746]@3 pmi8994_boost_5v: no parameters
242<3>[ 0.263837]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
243<3>[ 0.263937]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
244<6>[ 0.264218]@3 pmi8994_boost_pin_ctrl: no parameters
245<3>[ 0.264266]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
246<3>[ 0.264353]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
247<6>[ 0.264673]@3 pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
248<6>[ 0.265008]@3 pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
249<6>[ 0.265212]@3 pm8994_s11_avs_limit: 470 <--> 1140 mV
250<6>[ 0.265326]@3 spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
251<6>[ 0.266109]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
252<6>[ 0.266131]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
253<6>[ 0.266144]@3 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
254<6>[ 0.266159]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
255<6>[ 0.266174]@3 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
256<6>[ 0.266489]@3 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
257<3>[ 0.266502]@3 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
258<6>[ 0.266513]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
259<3>[ 0.266525]@3 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
260<3>[ 0.267004]@3 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
261<6>[ 0.267418]@3 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
262<3>[ 0.267483]@3 i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
263<3>[ 0.267497]@3 i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
264<6>[ 0.267774]@3 i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
265<3>[ 0.267829]@3 i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
266<3>[ 0.267841]@3 i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
267<6>[ 0.268125]@3 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
268<3>[ 0.268179]@3 i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
269<3>[ 0.268190]@3 i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
270<6>[ 0.268469]@3 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
271<3>[ 0.268523]@3 i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
272<3>[ 0.268535]@3 i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
273<6>[ 0.268783]@3 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
274<3>[ 0.268837]@3 i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
275<3>[ 0.268848]@3 i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
276<3>[ 0.269082]@3 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
277<6>[ 0.287810]@3 qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
278<6>[ 0.288862]@3 vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
279<6>[ 0.288883]@3 vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
280<6>[ 0.288896]@3 vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
281<6>[ 0.289116]@3 vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
282<6>[ 0.289130]@3 vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
283<6>[ 0.289142]@3 vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
284<6>[ 0.289381]@3 cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
285<6>[ 0.289395]@3 cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
286<6>[ 0.289408]@3 cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
287<6>[ 0.298512]@3 qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
288<6>[ 0.300230]@3 pmi8994_boost_5v: no parameters
289<3>[ 0.300333]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
290<3>[ 0.300433]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
291<6>[ 0.300635]@3 pmi8994_boost_pin_ctrl: no parameters
292<3>[ 0.300682]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
293<3>[ 0.300767]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
294<6>[ 0.301492]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
295<6>[ 0.301514]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
296<6>[ 0.301527]@3 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
297<6>[ 0.301541]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
298<6>[ 0.301556]@3 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
299<6>[ 0.301740]@3 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
300<3>[ 0.301752]@3 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
301<6>[ 0.301762]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
302<3>[ 0.301774]@3 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
303<6>[ 0.302351]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
304<6>[ 0.302365]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 2
305<6>[ 0.302375]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
306<6>[ 0.302385]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
307<6>[ 0.302395]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
308<6>[ 0.302406]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
309<6>[ 0.302613]@3 cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=80000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
310<6>[ 0.302799]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 565000 uV
311<6>[ 0.302811]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 645000 uV
312<6>[ 0.302821]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 745000 uV
313<6>[ 0.302830]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 900000 uV
314<6>[ 0.302930]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 269
315<6>[ 0.302939]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 417, quot_offset[ 7]= 105
316<6>[ 0.302950]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 642, quot_offset[ 7]= 225
317<6>[ 0.302959]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 988, quot_offset[ 7]= 345
318<6>[ 0.303093]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
319<6>[ 0.303102]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 2
320<6>[ 0.303112]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
321<6>[ 0.303121]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
322<6>[ 0.303131]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
323<6>[ 0.303142]@3 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
324<6>[ 0.303286]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 565000 uV
325<6>[ 0.303296]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 645000 uV
326<6>[ 0.303306]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 745000 uV
327<6>[ 0.303314]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 900000 uV
328<6>[ 0.303326]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: CBF offset open-loop= 535000 uV
329<6>[ 0.303335]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused LowSVS: CBF offset open-loop= 645000 uV
330<6>[ 0.303344]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: CBF offset open-loop= 645000 uV
331<6>[ 0.303352]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: CBF offset open-loop= 755000 uV
332<6>[ 0.303361]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: CBF offset open-loop= 890000 uV
333<6>[ 0.303403]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 269
334<6>[ 0.303412]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 417, quot_offset[ 7]= 105
335<6>[ 0.303422]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 642, quot_offset[ 7]= 225
336<6>[ 0.303431]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 988, quot_offset[ 7]= 345
337<6>[ 0.303530]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
338<6>[ 0.303540]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 2
339<6>[ 0.303549]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
340<6>[ 0.303559]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
341<6>[ 0.303568]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
342<6>[ 0.303579]@3 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
343<6>[ 0.303772]@3 cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=130000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
344<6>[ 0.303979]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 575000 uV
345<6>[ 0.303991]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 655000 uV
346<6>[ 0.304000]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 745000 uV
347<6>[ 0.304009]@3 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop=1040000 uV
348<6>[ 0.304124]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 291
349<6>[ 0.304134]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 440, quot_offset[ 7]= 105
350<6>[ 0.304144]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 643, quot_offset[ 7]= 200
351<6>[ 0.304153]@3 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1247, quot_offset[ 7]= 600
352<6>[ 0.304639]@3 cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
353<6>apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
354<6>[ 0.304995]@3 apc0_cbf_corner: 0 <--> 0 mV at 0 mV
355<6>[ 0.307850]@3 cpr3_regulator_measure_aging: apcc: average quotient delta=-1 (count=10)
356<6>[ 0.307876]@3 cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=1562 uV
357<6>[ 0.308206]@3 apc1_corner: 0 <--> 0 mV at 0 mV
358<6>[ 0.309648]@3 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: speed bin = 0
359<6>[ 0.309666]@3 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 1
360<6>[ 0.309676]@3 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
361<6>[ 0.309972]@3 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 620000 uV
362<6>[ 0.309983]@3 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 675000 uV
363<6>[ 0.309992]@3 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 805000 uV
364<6>[ 0.310001]@3 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 935000 uV
365<6>[ 0.310213]@3 cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
366<6>gfx_corner: 0 <--> 0 mV at 0 mV
367<6>[ 0.311571]@3 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
368<3>[ 0.311663]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
369<6>i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
370<6>i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
371<3>[ 0.312548]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
372<6>i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
373<6>i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
374<3>[ 0.313431]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
375<6>i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
376<6>i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
377<3>[ 0.314348]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
378<6>i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
379<6>i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
380<3>[ 0.315084]@3 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
381<6>i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
382<6>cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
383<6>[ 0.318077]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu0
384<6>[ 0.318130]@3 clock-cpu-8996: set OPP pair (2188800000 Hz, 1085000 uv) on cpu0
385<6>[ 0.318149]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu1
386<6>[ 0.318187]@3 clock-cpu-8996: set OPP pair (2188800000 Hz, 1085000 uv) on cpu1
387<6>[ 0.318204]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu2
388<6>[ 0.318263]@3 clock-cpu-8996: set OPP pair (2342400000 Hz, 1075000 uv) on cpu2
389<6>[ 0.318280]@3 clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu3
390<6>[ 0.318334]@3 clock-cpu-8996: set OPP pair (2342400000 Hz, 1075000 uv) on cpu3
391<6>[ 0.318460]@3 clock-cpu-8996: set OPP pair (192000000 Hz, 600000 uv) on soc:qcom,m4m
392<6>[ 0.318503]@3 clock-cpu-8996: set OPP pair (1593600000 Hz, 955000 uv) on soc:qcom,m4m
393<6>[ 0.318843]@3 qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
394<6>[ 0.319204]@3 gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 550000 uV) on b00000.qcom,kgsl-3d0
395<6>[ 0.319243]@3 gfx3d_clk_src_v2: set OPP pair(652800000 Hz: 910000 uV) on b00000.qcom,kgsl-3d0
396<6>[ 0.320680]@3 qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
397<6>[ 0.320899]@3 pmi8994_boost_5v: no parameters
398<3>[ 0.320973]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
399<3>[ 0.321071]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
400<6>[ 0.321264]@3 pmi8994_boost_pin_ctrl: no parameters
401<3>[ 0.321311]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
402<3>[ 0.321396]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
403<6>[ 0.322137]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
404<6>[ 0.322157]@3 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
405<6>[ 0.322170]@3 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
406<6>[ 0.322184]@3 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
407<6>[ 0.322199]@3 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
408<3>[ 0.322449]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
409<3>[ 0.322465]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
410<3>[ 0.322476]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
411<3>[ 0.322494]@3 msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
412<3>[ 0.323473]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
413<3>[ 0.323489]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
414<3>[ 0.323500]@3 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
415<6>[ 0.323667]@3 pmi8994_boost_5v: no parameters
416<3>[ 0.323725]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
417<3>[ 0.323820]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
418<6>[ 0.324015]@3 pmi8994_boost_pin_ctrl: no parameters
419<3>[ 0.324062]@3 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
420<3>[ 0.324150]@3 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
421<6>[ 0.353927]@3 KPI: Bootloader start count = 35772
422<6>[ 0.353943]@3 KPI: Bootloader end count = 164025
423<6>[ 0.353951]@3 KPI: Bootloader display count = 163788
424<6>[ 0.353960]@3 KPI: Bootloader load kernel count = 2223
425<6>[ 0.353970]@3 KPI: Kernel MPM timestamp = 189018
426<6>[ 0.353977]@3 KPI: Kernel MPM Clock frequency = 32768
427<6>[ 0.353992]@3 socinfo_print: v0.11, id=305, ver=1.1, raw_id=95, raw_ver=1, hw_plat=8, hw_plat_ver=65536
428<6> accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=82829733 num_pmics=2
429<3>[ 0.354017]@3 init_project_info: project_name: 15811 hw_version: 28 rf_v1: 22 rf_v2: 1: rf_v3: 0 paltform_id:305
430<3>[ 0.354031]@3 init_project_info: aboard_version: 1
431<3>[ 0.354909]@3 op_rf_cable_probe: ftm_mode FOUND! use 1 always
432<3>[ 0.354927]@3 modify_rf_cable_smem_info: rf_cable: 1
433<3>[ 0.354935]@3 op_rf_cable_probe: probe ok!
434<6>[ 0.355274]@3 gdsc_mmagic_bimc: no parameters
435<6>[ 0.355878]@3 rome_vreg: no parameters
436<6>[ 0.356119]@3 wlan_en_vreg: no parameters
437<6>[ 0.356670]@3 vgaarb: loaded
438<5>[ 0.356883]@3 SCSI subsystem initialized
439<6>[ 0.357055]@3 usbcore: registered new interface driver usbfs
440<6>[ 0.357094]@3 usbcore: registered new interface driver hub
441<6>[ 0.357236]@3 usbcore: registered new device driver usb
442<4>[ 0.357602]@3 soc:usb_nop_phy supply vcc not found, using dummy regulator
443<6>[ 0.380412]@3 cpufreq: driver msm up and running
444<6>[ 0.380937]@3 platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
445<6>[ 0.381049]@3 platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
446<6>[ 0.381155]@3 platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
447<6>[ 0.381340]@3 ION heap system created
448<3>[ 0.381429]@3 ion_heap_create: Heap type is disabled: 1
449<3>[ 0.381435]@3 msm_ion_heap_create: error creating heap kmalloc type 1 base 0x0000000000000000 size 0
450<6>[ 0.381441]@3 ION heap adsp created at 0x00000000ff800000 with size 400000
451<6>[ 0.381449]@3 ION heap qsecom created at 0x00000000fe400000 with size 1400000
452<6>[ 0.381456]@3 ION heap secure_display created at 0x00000000f8800000 with size 5c00000
453<6>[ 0.381467]@3 ION heap secure_heap created
454<3>[ 0.382106]@3 msm_bus_fabric_init_driver
455<3>[ 0.384675]@3 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
456<3>[ 0.384689]@3 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
457<3>[ 0.387090]@3 msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
458<3>[ 0.387479]@3 msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
459<3>[ 0.392332]@3 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
460<3>[ 0.392344]@3 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
461<3>[ 0.392353]@3 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
462<3>[ 0.392458]@3 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
463<3>[ 0.392479]@3 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
464<3>[ 0.392498]@3 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
465<3>[ 0.392516]@3 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
466<3>[ 0.392533]@3 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
467<3>[ 0.392550]@3 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
468<3>[ 0.392568]@3 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
469<6>[ 0.393807]@3 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset[0x21] and 'cold' boot
470<6>[ 0.393818]@3 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC)[0x21] and 'cold' boot
471<6>[ 0.393834]@3 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)[0x2]
472<6>[ 0.393944]@3 input: qpnp_pon as /devices/virtual/input/input0
473<6>[ 0.394418]@3 pon_spare_reg: no parameters
474<6>[ 0.394472]@3 qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
475<6>[ 0.394527]@3 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC)[0x20] and 'cold' boot
476<6>[ 0.394542]@3 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)[0x2]
477<6>[ 0.394688]@3 PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
478<6>[ 0.394772]@3 PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
479<3>[ 0.395780]@3 ipa ipa2_uc_state_check:296 uC interface not initialized
480<3>[ 0.395792]@3 ipa ipa_sps_irq_control_all:938 EP (2) not allocated.
481<3>[ 0.395797]@3 ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
482<6>[ 0.397748]@3 sps:BAM 0x0000000000684000 is registered.
483<3>ipa ipa2_uc_state_check:296 uC interface not initialized
484<6>[ 0.398645]@3 sps:BAM 0x0000000000684000 (va:0xffffff80020c0000) enabled: ver:0x27, number of pipes:20
485<3>[ 0.399987]@3 ipa ipa2_uc_state_check:296 uC interface not initialized
486<3>[ 0.404961]@3 ipa ipa2_uc_state_check:296 uC interface not initialized
487<6>[ 0.406528]@3 IPA driver initialization was successful.
488<6>[ 0.407713]@3 gdsc_mmagic_video: no parameters
489<6>[ 0.407909]@3 gdsc_mmagic_mdss: no parameters
490<6>[ 0.408048]@3 gdsc_mmagic_camss: no parameters
491<6>[ 0.408253]@3 gdsc_venus: no parameters
492<6>[ 0.408272]@3 gdsc_venus: supplied by gdsc_mmagic_video
493<6>[ 0.408420]@3 gdsc_venus_core0: fast normal
494<6>[ 0.408556]@3 gdsc_venus_core1: fast normal
495<6>[ 0.408707]@3 gdsc_camss_top: no parameters
496<6>[ 0.408723]@3 gdsc_camss_top: supplied by gdsc_mmagic_camss
497<6>[ 0.408882]@3 gdsc_vfe0: no parameters
498<6>[ 0.408898]@3 gdsc_vfe0: supplied by gdsc_camss_top
499<6>[ 0.409031]@3 gdsc_vfe1: no parameters
500<6>[ 0.409053]@3 gdsc_vfe1: supplied by gdsc_camss_top
501<6>[ 0.409208]@3 gdsc_mdss: no parameters
502<6>[ 0.409225]@3 gdsc_mdss: supplied by gdsc_mmagic_mdss
503<6>[ 0.409470]@3 gdsc_jpeg: no parameters
504<6>[ 0.409488]@3 gdsc_jpeg: supplied by gdsc_camss_top
505<6>[ 0.409627]@3 gdsc_cpp: no parameters
506<6>[ 0.409649]@3 gdsc_cpp: supplied by gdsc_camss_top
507<6>[ 0.409788]@3 gdsc_pcie_0: no parameters
508<6>[ 0.409913]@3 gdsc_pcie_1: no parameters
509<6>[ 0.410172]@3 gdsc_pcie_2: no parameters
510<6>[ 0.410306]@3 gdsc_usb30: no parameters
511<6>[ 0.410442]@3 gdsc_ufs: no parameters
512<6>[ 0.410609]@3 gdsc_fd: no parameters
513<6>[ 0.410632]@3 gdsc_fd: supplied by gdsc_camss_top
514<6>[ 0.410787]@3 gdsc_gpu: no parameters
515<6>[ 0.410935]@3 gdsc_gpu_gx: no parameters
516<6>[ 0.411298]@3 gdsc_gpu_gx: supplied by gfx_corner
517<6>[ 0.411454]@3 gdsc_hlos1_vote_aggre0_noc: no parameters
518<6>[ 0.411583]@3 gdsc_hlos1_vote_lpass_adsp: no parameters
519<6>[ 0.411721]@3 gdsc_hlos1_vote_lpass_core: no parameters
520<6>[ 0.411844]@3 gdsc_aggre0_noc: no parameters
521<6>[ 0.413971]@3 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
522<6>[ 0.413988]@3 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
523<6>[ 0.415771]@3 dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
524<6>[ 0.415850]@3 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
525<6>[ 0.415861]@3 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
526<3>[ 0.416936]@3 pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
527<6>[ 0.417385]@3 dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
528<6>[ 0.524897]@3 get_param_by_index_and_offset[75] sid_index = 12 offset = 0 buf = ffffffc000fff780 length = 420
529<6>[ 0.525012]@3 Advanced Linux Sound Architecture Driver Initialized.
530<1>[ 0.525520]@3 pcie:pcie_init.
531<4>[ 0.528787]@3 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
532<3>[ 0.531531]@3 msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
533<6>[ 0.534239]@0 pmi8994_boost_5v: no parameters
534<6>[ 0.534549]@0 pmi8994_boost_5v: supplied by pon_spare_reg
535<6>[ 0.534988]@0 pmi8994_boost_pin_ctrl: no parameters
536<6>[ 0.535159]@0 pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
537<6>[ 0.535714]@3 Switched to clocksource arch_sys_counter
538<6>[ 0.536556]@3 bcl_peripheral:bcl_perph_init BCL Initialized
539<6>[ 0.540600]@3 NET: Registered protocol family 2
540<6>[ 0.541110]@3 TCP established hash table entries: 65536 (order: 7, 524288 bytes)
541<6>[ 0.541222]@3 TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
542<6>[ 0.542145]@3 TCP: Hash tables configured (established 65536 bind 65536)
543<6>[ 0.542323]@3 TCP: reno registered
544<6>[ 0.542367]@3 UDP hash table entries: 4096 (order: 5, 131072 bytes)
545<6>[ 0.542450]@3 UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
546<6>[ 0.542815]@3 NET: Registered protocol family 1
547<7>[ 0.542876]@3 PCI: CLS 0 bytes, default 128
548<6>[ 0.543386]@3 Trying to unpack rootfs image as initramfs...
549<6>[ 0.710574]@3 Freeing initrd memory: 8912K (ffffffc002200000 - ffffffc002ab4000)
550<6>[ 0.712423]@3 kryo perfevents: CPU pmu for kryo-pmuv3 detected
551<6>[ 0.717284]@3 futex hash table entries: 1024 (order: 5, 131072 bytes)
552<6>[ 0.717417]@3 audit: initializing netlink subsys (disabled)
553<5>[ 0.717528]@3 audit: type=2000 audit(0.709:1): initialized
554<4>[ 0.718019]@3 vmscan: error setting kswapd cpu affinity mask
555<5>[ 0.720733]@3 VFS: Disk quotas dquot_6.5.2
556<4>[ 0.720827]@3 Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
557<6>[ 0.721379]@3 exfat: init_exfat_fs: exFAT Filesystem version 1.2.24
558<6>[ 0.721429]@3 fuse init (API version 7.23)
559<6>[ 0.723592]@3 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
560<6>[ 0.723609]@3 io scheduler noop registered (default)
561<3>[ 0.734032]@3 mdss_mdp_irq_clk_register: unable to get clk: lut_clk
562<3>[ 0.735282]@3 No change in context(0==0), skip
563<6>[ 0.736351]@3 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
564<6>[ 0.736361]@3 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
565<6>[ 0.736367]@3 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
566<6>[ 0.736374]@3 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
567<6>[ 0.736388]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
568<6>[ 0.736394]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
569<6>[ 0.736401]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
570<6>[ 0.736407]@3 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
571<6>[ 0.736420]@3 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
572<6>[ 0.736426]@3 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
573<6>[ 0.736439]@3 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
574<6>[ 0.736445]@3 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
575<3>[ 0.736455]@3 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
576<3>[ 0.736523]@3 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
577<6>[ 0.736858]@3 xlog_status: enable:0, panic:0, dump:1
578<6>[ 0.737986]@3 mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00000100
579<6>[ 0.742546]@3 mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
580<6>[ 0.742708]@3 mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
581<6>[ 0.742820]@3 mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
582<6>[ 0.742926]@3 mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
583<6>[ 0.745825]@3 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
584<6>[ 0.746159]@3 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3fa5_1080p_cmd:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_samsung_s6e3fa5_1080p_cmd
585<6>[ 0.746175]@3 mdss_dsi_panel_init: Panel Name = samsung s6e3fa5 1080p cmd mode dsi panel
586<6>[ 0.746265]@3 mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3fa5_1080p_cmd" (ffffffc1764bb380)
587<3>[ 0.746284]@3 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
588<4>[ 0.746290]@3 mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
589<6>[ 0.746411]@3 mdss_dsi_parse_panel_features: partial_update_enabled=0
590<6>[ 0.746420]@3 mdss_dsi_parse_panel_features: ulps feature disabled
591<6>[ 0.746427]@3 mdss_dsi_parse_panel_features: ulps during suspend feature disabled
592<6>mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
593<6>[ 0.746463]@3 mdss_dsi_panel_init: Panel Manufacture = SAMSUNG
594<6>[ 0.746469]@3 mdss_dsi_panel_init: Panel Version = S6E3FA5
595<3>[ 0.746476]@3 high brightness panel: 1
596<3>[ 0.746871]@3 mdss_dsi_parse_ctrl_params:4006 Unable to read qcom,display-id, data=0000000000000000,len=20
597<6>[ 0.746917]@3 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
598<3>[ 0.747144]@3 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
599<3>[ 0.747150]@3 0xffffffc0003911a8->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
600<6>[ 0.747158]@3 mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80021dc000 ctrl_size=400 phy_base=ffffff80021de400 phy_size=588
601<6>[ 0.747327]@3 dsi_panel_device_register: Continuous splash enabled
602<6>[ 0.747920]@3 mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
603<6>[ 0.751175]@3 mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
604<6>[ 0.752512]@3 mdss_dsi_status_init: DSI status check interval:5000
605<6>[ 0.752911]@3 mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
606<6>[ 0.754496]@3 mdss_fb_probe: fb0: split_mode:0 left:0 right:0
607<6>[ 0.754967]@3 mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
608<6>[ 0.755787]@3 mdss_fb_probe: fb1: split_mode:0 left:0 right:0
609<6>[ 0.755863]@3 mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
610<3>[ 0.755917]@3 mdss_mdp_splash_parse_dt: splash mem child node is not present
611<6>[ 0.766215]@3 In memshare_probe, Memshare probe success
612<6>[ 0.771372]@2 l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
613<5>[ 0.772319]@2 msm_rpm_log_probe: OK
614<6>[ 0.775662]@3 subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
615<6>subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
616<3>uart_tx_gpio is not available
617<3>[ 0.779688]@3 uart_rx_gpio is not available
618<3>[ 0.779695]@3 uart_cts_gpio is not available
619<3>[ 0.779702]@3 uart_rfr_gpio is not available
620<3>[ 0.780605]@3 sps: BAM device 0x0000000007544000 is not registered yet.
621<6>[ 0.780760]@3 sps:BAM 0x0000000007544000 is registered.
622<3>smd_channel_probe_now: allocation table not initialized
623<6>[ 0.782326]@3 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 20, base_baud = 460800) is a MSM HS UART
624<6>[ 0.784416]@3 msm_serial_hs module loaded
625<6>[ 0.785205]@3 msm_serial_hsl_probe: detected port #0 (ttyHSL0)
626<3>[ 0.785340]@3 AXI: get_pdata(): Error: Client name not found
627<3>[ 0.785348]@3 AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
628<3>[ 0.785355]@3 msm_serial_hsl_probe: Bus scaling is disabled
629<6>[ 0.785460]@3 75b0000.serial: ttyHSL0 at MMIO 0x75b0000 (irq = 12, base_baud = 460800) is a MSM
630<6>[ 0.785542]@3 msm_hsl_console_setup: console setup on port #0
631<6>[ 5.303896]@2 console [ttyHSL0] enabled
632<6>[ 5.308874]@2 msm_serial_hsl_init: driver initialized
633<6>[ 5.333149]@3 brd: module loaded
634<6>[ 5.336256]@3 loop: module loaded
635<6>[ 5.338729]@3 at24 6-0051: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
636<6>[ 5.346526]@3 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
637<4>[ 5.352346]@3 QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
638<6>QSEECOM: qseecom_probe: no-clock-support=0x1<4>QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
639<3>[ 5.368827]@3 scm_call failed: func id 0x70000006, ret: -2, syscall returns: 0xffffffffffffffed, 0x0, 0x0
640<4>[ 5.377734]@3 QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
641<4>[ 5.384981]@3 i2c-core: driver [tusb320] using legacy suspend method
642<4>[ 5.390321]@3 i2c-core: driver [tusb320] using legacy resume method
643<4>[ 5.396587]@3 i2c-core: driver [fusb301] using legacy suspend method
644<4>[ 5.403121]@3 i2c-core: driver [fusb301] using legacy resume method
645<4>[ 5.409173]@3 i2c-core: driver [ptn5150] using legacy suspend method
646<4>[ 5.415484]@3 i2c-core: driver [ptn5150] using legacy resume method
647<3>[ 5.423371]@3 gpio_dev_probe
648<3>[ 5.425255]@3 i= 1 gpio=: 97
649<3>[ 5.428116]@3 i= 2 gpio=: 98
650<3>[ 5.431079]@3 i= 3 gpio=: 100
651<3>[ 5.433954]@3 i= 4 gpio=: 115
652<3>[ 5.436918]@3 i= 5 gpio=: 127
653<3>[ 5.439881]@3 i= 6 gpio=: 133
654<3>[ 5.442857]@3 i= 7 gpio=: 136
655<4>[ 5.445736]@3 gpio_pinctrl_init
656<4>[ 5.449320]@3 gpio_dev_probe ok!
657<6>[ 5.452720]@3 Loading pn544 driver
658<6>[ 5.455673]@3 Enter pn544_probe !!!
659<6>[ 5.459223]@3 pn544_parse_dt: 9, 94, 12, 1015 ,1018, 0
660<6>[ 5.464330]@3 successfully got regulator_s4
661<6>[ 5.468570]@3 successfully set regulator voltage_s4
662<6>[ 5.473244]@3 get BBCLK2!!!
663<6>[ 5.476035]@3 clk_prepare_enable. ret = 0
664<6>[ 5.480136]@3 pn544_probe : requesting IRQ 273
665<6>[ 5.484534]@3 pn544_probe pn544_dev->clk_gpio = 0
666<6>[ 5.489156]@3 pn544_probe : requesting IRQ 542
667<4>[ 5.493618]@3 ###clkreq_disable_irq###
668<4>i2c-core: driver [pn544] using legacy suspend method
669<4>[ 5.502173]@3 i2c-core: driver [pn544] using legacy resume method
670<6>[ 5.508048]@3 [NXP-P61] : Entry : p61_dev_init
671<6>[ 5.513806]@3 qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
672<6>[ 5.519919]@3 qce 660000.qcedev: CE device = 0x0
673<6>, IO base, CE = 0xffffff8003780000
674<6>, Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
675<6>IO base BAM = 0x (null)
676<6>BAM IRQ 156
677<6>Engines Availability = 0x2011053
678<6>[ 5.539291]@3 sps:BAM 0x0000000000644000 is registered.
679<6>sps:BAM 0x0000000000644000 (va:0xffffff8003800000) enabled: ver:0x27, number of pipes:16
680<6>[ 5.552593]@3 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
681<6>[ 5.567983]@3 qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
682<6>[ 5.574624]@3 qcrypto 660000.qcrypto: CE device = 0x0
683<6>, IO base, CE = 0xffffff8003840000
684<6>, Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
685<6>IO base BAM = 0x (null)
686<6>BAM IRQ 156
687<6>Engines Availability = 0x2011053
688<6>[ 5.594486]@3 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
689<6>[ 5.607794]@3 qcrypto 660000.qcrypto: qcrypto-ecb-aes
690<6>[ 5.611905]@3 qcrypto 660000.qcrypto: qcrypto-cbc-aes
691<6>[ 5.616911]@3 qcrypto 660000.qcrypto: qcrypto-ctr-aes
692<6>[ 5.621959]@3 qcrypto 660000.qcrypto: qcrypto-ecb-des
693<6>[ 5.626984]@3 qcrypto 660000.qcrypto: qcrypto-cbc-des
694<6>[ 5.632027]@3 qcrypto 660000.qcrypto: qcrypto-ecb-3des
695<6>[ 5.637134]@3 qcrypto 660000.qcrypto: qcrypto-cbc-3des
696<6>[ 5.642264]@3 qcrypto 660000.qcrypto: qcrypto-xts-aes
697<6>[ 5.647290]@3 qcrypto 660000.qcrypto: qcrypto-sha1
698<6>[ 5.652279]@3 qcrypto 660000.qcrypto: qcrypto-sha256
699<6>[ 5.657012]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
700<6>[ 5.663359]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
701<6>[ 5.669685]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
702<6>[ 5.676124]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
703<6>[ 5.682630]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
704<6>[ 5.689130]@3 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
705<6>[ 5.695747]@3 qcrypto 660000.qcrypto: qcrypto-hmac-sha1
706<6>[ 5.701130]@3 qcrypto 660000.qcrypto: qcrypto-hmac-sha256
707<6>[ 5.706316]@3 qcrypto 660000.qcrypto: qcrypto-aes-ccm
708<6>[ 5.711364]@3 qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
709<6>[ 5.719651]@3 ICE IRQ = 28
710<6>[ 5.725582]@3 qcom_ice_get_pdevice: found ice device ffffffc0b5dc1c00
711<6>[ 5.731068]@3 qcom_ice_get_pdevice: matching platform device ffffffc175bce800
712<3>[ 5.738598]@3 scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
713<3>[ 5.748242]@3 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
714<3>ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
715<6>scsi host0: ufshcd
716<6>[ 5.767148]@3 qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002890000
717<6>[ 5.791569]@3 SCSI Media Changer driver v0.25
718<6>[ 5.798652]@3 sps:BAM 0x0000000007544000 (va:0xffffff80025c0000) enabled: ver:0x19, number of pipes:24
719<6>[ 5.807473]@3 [NXP-P61] : p61_probe chip select : 1 , bus number = 0
720<3>[ 5.809242]@1 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
721<6>[ 5.825826]@3 p61_parse_dt: 34, 21 0
722<6>[ 5.829153]@3 [NXP-P61] : Entry : p61_hw_setup
723<6>[ 5.833709]@3 [NXP-P61] : Exit : p61_hw_setup
724<6>[ 5.838191]@3 [NXP-P61] : Entry : p61_disable_irq
725<6>[ 5.842878]@3 [NXP-P61] : Exit : p61_disable_irq
726<6>[ 5.847556]@3 [NXP-P61] : Exit : p61_probe
727<6>[ 5.853467]@3 msm_sharedmem: sharedmem_register_qmi: qmi init successful
728<6>[ 5.861927]@2 msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
729<4>[ 5.872169]@2 7411000.qusb supply USB3_GDSC not found, using dummy regulator
730<3>[ 5.881253]@3 msm-dwc3 6a00000.ssusb: unable to get dbm device
731<6>[ 5.889101]@3 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
732<6>[ 5.894853]@3 ehci-pci: EHCI PCI platform driver
733<6>[ 5.899416]@3 usbcore: registered new interface driver uas
734<6>[ 5.905132]@3 usbcore: registered new interface driver usb-storage
735<6>[ 5.911027]@3 usbcore: registered new interface driver ums-alauda
736<6>[ 5.917091]@3 usbcore: registered new interface driver ums-cypress
737<6>[ 5.923283]@3 usbcore: registered new interface driver ums-datafab
738<6>[ 5.929417]@3 usbcore: registered new interface driver ums_eneub6250
739<6>[ 5.935766]@3 usbcore: registered new interface driver ums-freecom
740<6>[ 5.941927]@3 usbcore: registered new interface driver ums-isd200
741<6>[ 5.947997]@3 usbcore: registered new interface driver ums-jumpshot
742<6>[ 5.954434]@3 usbcore: registered new interface driver ums-karma
743<6>[ 5.960244]@3 usbcore: registered new interface driver ums-onetouch
744<6>[ 5.966483]@3 usbcore: registered new interface driver ums-realtek
745<6>[ 5.972656]@3 usbcore: registered new interface driver ums-sddr09
746<6>[ 5.978726]@3 usbcore: registered new interface driver ums-sddr55
747<6>[ 5.984845]@3 usbcore: registered new interface driver ums-usbat
748<6>[ 5.990850]@3 usbcore: registered new interface driver usbserial
749<6>[ 5.997248]@3 gbridge_init: gbridge_init successs.
750<6>[ 6.001838]@3 mousedev: PS/2 mouse device common for all mice
751<6>[ 6.007361]@3 usbcore: registered new interface driver xpad
752<3>[ 6.012839]@3 synaptics,s3320: tpd_driver_init enter
753<3>[ 6.017228]@1 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
754<5>[ 6.017997]@1 scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
755<5>[ 6.018816]@1 scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
756<5>[ 6.019538]@1 scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
757<4>[ 6.020197]@1 ufs_get_capacity_info size = 0x7734000
758<5>scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
759<5>[ 6.021222]@0 scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
760<5>[ 6.021653]@0 scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
761<5>[ 6.022085]@0 scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
762<5>[ 6.022514]@0 scsi 0:0:0:4: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
763<5>[ 6.022942]@0 scsi 0:0:0:5: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
764<5>[ 6.023860]@1 sd 0:0:0:0: [sda] 16384-byte physical blocks
765<5>[ 6.024380]@1 sd 0:0:0:1: [sdb] 16384-byte physical blocks
766<5>[ 6.026005]@2 sd 0:0:0:2: [sdc] 16384-byte physical blocks
767<5>[ 6.026020]@1 sd 0:0:0:1: [sdb] 16384-byte physical blocks
768<5>[ 6.026575]@1 sd 0:0:0:3: [sdd] 16384-byte physical blocks
769<5>[ 6.026804]@0 sd 0:0:0:4: [sde] 16384-byte physical blocks
770<5>[ 6.027018]@2 sd 0:0:0:5: [sdf] 16384-byte physical blocks
771<5>[ 6.027028]@1 sd 0:0:0:0: [sda] 16384-byte physical blocks
772<5>[ 6.029879]@2 sd 0:0:0:2: [sdc] 16384-byte physical blocks
773<6>[ 6.030116]@1 sdb: sdb1
774<5>[ 6.030223]@2 sd 0:0:0:3: [sdd] 16384-byte physical blocks
775<5>[ 6.030259]@2 sd 0:0:0:4: [sde] 16384-byte physical blocks
776<5>[ 6.031117]@2 sd 0:0:0:1: [sdb] 16384-byte physical blocks
777<5>[ 6.031144]@2 sd 0:0:0:5: [sdf] 16384-byte physical blocks
778<6>[ 6.031397]@0 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15
779<5>[ 6.033925]@1 sd 0:0:0:0: [sda] 16384-byte physical blocks
780<6>[ 6.034213]@0 sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34
781<6>[ 6.035048]@1 sdf: sdf1 sdf2 sdf3 sdf4
782<5>[ 6.035748]@1 sd 0:0:0:5: [sdf] 16384-byte physical blocks
783<6>[ 6.036912]@0 sdd: sdd1 sdd2 sdd3
784<5>[ 6.037420]@0 sd 0:0:0:4: [sde] 16384-byte physical blocks
785<5>[ 6.037669]@0 sd 0:0:0:3: [sdd] 16384-byte physical blocks
786<6>[ 6.038565]@1 sdc: sdc1
787<5>[ 6.039217]@1 sd 0:0:0:2: [sdc] 16384-byte physical blocks
788<3>[ 6.247671]@3 synaptics,s3320: before on cpu [3]
789<3>[ 6.251580]@3 synaptics,s3320: check CPU[0] is [online]
790<3>[ 6.257093]@3 touchkey,s1302: boot_time: before optimize [synaptics_ts_probe] on cpu 3
791<3>[ 6.264593]@3 touchkey,s1302: boot_time: [synaptics_ts_probe] CPU0 is online
792<3>[ 6.273619]@2 switch_data->key3_gpio=1013
793<3>[ 6.276701]@2 switch_data->key2_gpio=1012
794<3>[ 6.280839]@2 switch_data->key1_gpio=1014
795<6>[ 6.286188]@2 fpc1020_probe
796<6>[ 6.288152]@2 fpc1020 soc:fpc_fpc1020: fpc,irq-gpio - gpio: 95
797<6>[ 6.293828]@2 fpc1020 soc:fpc_fpc1020: fpc,reset-gpio - gpio: 86
798<6>[ 6.299770]@2 fpc1020 soc:fpc_fpc1020: fpc,gpio_id0 - gpio: 25
799<3>[ 6.305581]@2 fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id0_gpio=25)
800<6>[ 6.313766]@2 fpc1020 soc:fpc_fpc1020: fpc,gpio_id1 - gpio: 143
801<3>[ 6.319631]@2 fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id1_gpio=143)
802<6>[ 6.327915]@2 fpc1020 soc:fpc_fpc1020: fpc,gpio_1V8_EN - gpio: 14
803<6>[ 6.334098]@2 input: fpc1020 as /devices/virtual/input/input1
804<6>[ 6.339932]@3 fpc1020 soc:fpc_fpc1020: requested irq 359
805<6>[ 6.345236]@3 fpc1020 soc:fpc_fpc1020: fpc1020_probe: ok
806<6>[ 6.351660]@3 qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
807<6>[ 6.357933]@3 i2c /dev entries driver
808<3>[ 6.362873]@3 SMBCHG: load_data: chip is NULL !
809<3>[ 6.366691]@3 SMBCHG: load_data: chip is NULL !
810<6>[ 6.371004]@2 FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
811<6>[ 6.379480]@3 BQ: bq27541_battery_probe: probe sucdess
812<3>[ 6.384706]@3 i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x11 (ok)
813<6>BQ: check_bat_type: is_4p4v_bat=1,support_4p4v_bat=1
814<4>[ 6.398131]@3 i2c-core: driver [bq27541-battery] using legacy suspend method
815<4>[ 6.405147]@3 i2c-core: driver [bq27541-battery] using legacy resume method
816<6>[ 6.412803]@3 FASTCHG: dash_probe: dash_probe
817<6>[ 6.450040]@3 FASTCHG: dash_probe: dash_probe success
818<3>[ 6.456034]@3 unable to find DT imem DLOAD mode node
819<3>[ 6.461336]@3 unable to find DT imem EDLOAD mode node
820<4>[ 6.466313]@3 set_dload_mode ON
821<6>[ 6.499240]@3 device-mapper: uevent: version 1.0.3
822<6>[ 6.503161]@3 device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
823<6>[ 6.511614]@3 device-mapper: req-crypt: dm-req-crypt successfully initalized.
824<6>
825<6>[ 6.519048]@3 sdhci: Secure Digital Host Controller Interface driver
826<6>[ 6.525240]@3 sdhci: Copyright(c) Pierre Ossman
827<6>[ 6.529740]@3 sdhci-pltfm: SDHCI platform and OF driver helper
828<6>[ 6.540758]@3 hidraw: raw HID events driver (C) Jiri Kosina
829<6>[ 6.545511]@3 usbcore: registered new interface driver usbhid
830<3>[ 6.550062]@0 synaptics,s3320: after on cpu [0]
831<3>[ 6.550069]@0 synaptics,s3320: synaptics_ts_probe is called
832<3>[ 6.550464]@0 synaptics,s3320: synaptics_parse_dts ts->support_hw_poweroff =1
833<3>[ 6.550468]@0 synaptics,s3320: ts->enable2v8_gpio not specified
834<3>[ 6.550471]@0 synaptics,s3320: ts->max_num not specified
835<3>[ 6.550474]@0 synaptics,s3320: button-map not specified
836<3>[ 6.550476]@0 synaptics,s3320: synaptics:button map readed is 0 0 0
837<3>[ 6.550480]@0 synaptics,s3320: synaptics,tx-rx-num is 16 28
838<4>[ 6.550483]@0 synaptics,s3320: synaptic:ts->irq_gpio:125 irq_flags:8200 max_num 10
839<3>[ 6.551057]@0 synaptics,s3320: synaptics:enable the v1p8_gpio
840<3>[ 6.570225]@0 touchkey,s1302: boot_time: after optimize call [synaptics_ts_probe] on cpu 0
841<3>[ 6.570230]@0 touchkey,s1302: synaptics_ts_probe is called
842<6>[ 6.623884]@3 usbhid: USB HID core driver
843<6>[ 6.628037]@3 ashmem: initialized
844<3>[ 6.630047]@0 synaptics,s3320: synaptics:enable the reset_gpio
845<6>[ 6.636873]@3 logger: created 256K log 'log_main'
846<6>[ 6.641565]@3 logger: created 256K log 'log_events'
847<6>[ 6.646403]@3 logger: created 256K log 'log_radio'
848<6>[ 6.651235]@2 logger: created 256K log 'log_system'
849<6>[ 6.658351]@2 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
850<6>[ 6.672383]@3 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
851<6>[ 6.679460]@3 arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
852<6>[ 6.687004]@2 arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
853<6>[ 6.697208]@2 m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
854<3>[ 6.707088]@3 devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
855<3>[ 6.714187]@3 devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
856<3>[ 6.722397]@3 devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
857<3>[ 6.731099]@3 devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
858<3>[ 6.740341]@0 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x17 (ok)
859<6>otracer: initialized
860<6>[ 6.742765]@3 op_netlink_init
861<3>[ 6.743432]@3 tfa98xx_i2c_probe
862<6>[ 6.743851]@3 TCP: cubic registered
863<6>[ 6.744004]@3 NET: Registered protocol family 10
864<6>[ 6.744315]@3 NET: Registered protocol family 17
865<6>[ 6.744912]@3 NET: Registered protocol family 27
866<6>[ 6.747368]@1 subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
867<6>subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
868<6>sps:BAM 0x0000000006b04000 is registered.
869<3>qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
870<6>[ 6.773105]@1 SMBCHG: qpnp_battery_temp_region_set: set temp_region = 5
871<6>[ 6.773178]@1 smbcharger_charger_otg: no parameters
872<6>[ 6.773273]@1 smbcharger_external_otg: no parameters
873<6>[ 6.773296]@1 smbcharger_external_otg: supplied by pmi8994_boost_5v
874<6>[ 6.773362]@1 SMBCHG: smbchg_hw_init: enable APSD
875<6>[ 6.773409]@1 SMBCHG: smbchg_hw_init: disabe HVDCP
876<6>[ 6.773652]@1 SMBCHG: smbchg_charging_en: enable=1
877<6>[ 6.773766]@1 SMBCHG: smbchg_charging_en: enable=0
878<6>[ 6.773791]@1 SMBCHG: smbchg_usb_suspend: suspend=0
879<6>[ 6.774265]@1 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 500, set to 500
880<6>[ 6.817617]@1 SMBCHG: handle_usb_insertion: inserted type = 5 (OTHER)
881<6>[ 6.817621]@1 SMBCHG: smbchg_charging_en: enable=1
882<6>[ 6.817645]@1 FG: oneplus_set_allow_read_iic: set allow read extern fg iic fail
883<6>[ 6.817649]@1 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1800, typeC_support_current_ma = 4000
884<6>[ 6.817857]@1 msm-dwc3 6a00000.ssusb: Avail curr from USB = 1500
885<6>[ 6.817900]@1 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = -22, online = 1
886<6>[ 6.818067]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
887<6>[ 6.818165]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
888<6>[ 6.834894]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
889<6>[ 6.835166]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
890<6>[ 6.835244]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
891<6>[ 6.835342]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
892<6>[ 6.838116]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
893<3>[ 6.838265]@1 qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
894<6>[ 6.838333]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
895<6>[ 6.838372]@1 SMBCHG: set_chg_ibat_vbat_max: vote ibatmax = 1910 and set vbatmax = 4370
896<6>[ 6.838420]@1 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 1910, set to 1900
897<6>[ 6.838774]@1 SMBCHG: qpnp_battery_temp_region_set: set temp_region = 5
898<6>[ 6.838777]@1 SMBCHG: smbchg_external_power_changed: change usb_target_current_ma = 1500
899<6>[ 6.838780]@1 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1500, typeC_support_current_ma = 4000
900<6>[ 6.838895]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
901<6>[ 6.838969]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
902<6>[ 6.839066]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
903<6>[ 6.839947]@1 qpnp-smbcharger qpnp-smbcharger-17: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
904<3>[ 6.839989]@1 tusb320 7-0060: tusb320_probe
905<3>[ 6.840276]@1 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1a (ok)
906<6>SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
907<3>[ 6.842875]@0 i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x60 MSTR_STS:0x0d1300c8 OPER:0x00000010
908<4>[ 6.843106]@1 tusb320_read_reg:reg(0x0), ret(-107)
909<3>[ 6.843111]@1 tusb320 7-0060: DEV_ID(0x0)!= 0x30
910<4>[ 6.843122]@1 tusb320: probe of 7-0060 failed with error -22
911<3>[ 6.843169]@1 fusb301 7-0021: fusb301_probe
912<3>[ 6.847792]@1 fusb301 7-0021: fusb301_gpio_configure OK!
913<3>[ 6.867940]@1 fusb301 7-0021: fusb301_probe OK!
914<3>[ 6.867996]@1 ptn5150 7-001d: ptn5150_probe
915<3>[ 6.875155]@0 i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
916<3>[ 6.875192]@1 ptn5150_read_reg: i2c read error: -5
917<3>[ 6.875196]@1 ptn5150 7-001d: DEV_ID(0x00)!= 0x0b || 0x09
918<4>[ 6.875203]@1 ptn5150: probe of 7-001d failed with error -22
919<3>[ 6.884592]@2 fusb301 7-0021: fusb301_irq_thread: type<0> int(0x07)
920<6>[ 6.889402]@3 project_info_init_sysfs success
921<6>[ 6.889791]@3 fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
922<6>adsprpc: channel link type: 0
923<6>[ 6.897848]@3 file system registered
924<6>[ 6.897875]@3 mbim_init: initialize 1 instances
925<6>[ 6.897909]@3 mbim_init: Initialized 1 ports
926<6>[ 6.898532]@3 rndis_qc_init: initialize rndis QC instance
927<3>[ 6.898559]@2 fusb301 7-0021: fusb301_irq_thread: Attach interrupt! TYPE is 5, Orient is 1
928<6>[ 6.898627]@3 Number of LUNs=8
929<6>[ 6.898632]@3 Mass Storage Function, version: 2009/09/11
930<6>[ 6.898635]@3 LUN: removable file: (no medium)
931<6>[ 6.898643]@3 Number of LUNs=1
932<6>[ 6.898666]@3 LUN: removable read only CD-ROM file: (no medium)
933<6>[ 6.898668]@3 Number of LUNs=1
934<6>[ 6.898757]@3 android_usb gadget: android_usb ready
935<6>[ 6.899976]@3 input: gpio-keys as /devices/soc/soc:gpio_keys/input/input2
936<6>[ 6.904782]@3 qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-02-04 00:24:48 UTC (2939088)
937<3>[ 6.904807]@2 fusb301 7-0021: fusb301_irq_thread: BC_LVL 1, 1:500ma 2:1.5A 3:3A!
938<6>[ 6.905175]@3 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
939<6>[ 6.908736]@3 lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
940<6>[ 6.908919]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
941<6>[ 6.909032]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
942<6>[ 6.909138]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
943<6>[ 6.909245]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
944<6>[ 6.909353]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
945<6>[ 6.909459]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
946<6>[ 6.909565]@3 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
947<3>[ 6.911236]@3 parse_cpu_levels: idx 1 545
948<3>[ 6.911241]@3 parse_cpu_levels: idx 2 6022
949<3>[ 6.911243]@3 parse_cpu_levels: idx 2 11499
950<3>[ 6.911278]@3 parse_cpu_levels: idx 1 545
951<3>[ 6.911280]@3 parse_cpu_levels: idx 2 6022
952<3>[ 6.911281]@3 parse_cpu_levels: idx 2 11499
953<6>[ 6.917446]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
954<6>[ 6.917529]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
955<6>[ 6.917628]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
956<3>[ 6.918711]@3 qcom,qpnp-flash-led qpnp-flash-led-25: Unable to acquire pinctrl
957<6>[ 6.920046]@3 rmnet_ipa started initialization
958<6>[ 6.920052]@3 IPA SSR support = True
959<6>[ 6.920054]@3 IPA ipa-loaduC = True
960<6>[ 6.920056]@3 IPA SG support = True
961<6>[ 6.920425]@1 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
962<3>[ 6.960959]@1 ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
963<3>[ 6.960964]@1 ipa ipa2_uc_state_check:301 uC is not loaded
964<6>[ 7.014273]@1 rmnet_ipa completed initialization
965<6>[ 7.018028]@1 qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
966<6>[ 7.018757]@1 wlan_en_vreg: disabling
967<6>[ 7.018763]@1 rome_vreg: disabling
968<6>[ 7.018765]@1 gdsc_mmagic_bimc: disabling
969<6>[ 7.018802]@1 kryo1-retention: disabling
970<6>[ 7.018804]@1 kryo0-retention: disabling
971<6>[ 7.018807]@1 gfx_mem_acc_corner: disabling
972<6>[ 7.018809]@1 apcc_l3_mem_acc_corner: disabling
973<6>[ 7.018811]@1 apc1_perfcl_mem_acc_corner: disabling
974<6>[ 7.018813]@1 apc0_pwrcl_mem_acc_corner: disabling
975<6>[ 7.018816]@1 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
976<6>[ 7.019151]@1 clock_late_init: Removing enables held for handed-off clocks
977<6>[ 7.132338]@1 ALSA device list:
978<6>[ 7.132343]@1 No soundcards found.
979<6>[ 7.436132]@3 BQ: bq27541_hw_config: DEVICE_TYPE is 0x541, FIRMWARE_VERSION is 0x200
980<6>[ 7.436137]@3 BQ: bq27541_hw_config: Complete bq27541 configuration 0x600B
981<3>[ 7.457715]@0 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1c (ok)
982<6>Freeing unused kernel memory: 396K (ffffffc000af6000 - ffffffc000b59000)
983<6>[ 7.457770]@1 Freeing alternatives memory: 68K (ffffffc000b59000 - ffffffc000b6a000)
984<3>[ 7.479575]@0 synaptics,s3320: F12_2D_QUERY_BASE = 47
985<3> F12_2D_CMD_BASE = 0
986<3> F12_2D_CTRL_BASE = 15
987<3> F12_2D_DATA_BASE = 6
988<3>
989<3>touchkey,s1302: product id is s1302
990<3>[ 7.494956]@0 synaptics,s3320: F01_RMI_QUERY_BASE = 2a
991<3> F01_RMI_CMD_BASE = 25
992<3> F01_RMI_CTRL_BASE = e
993<3> F01_RMI_DATA_BASE = 4
994<3>
995<3>touchkey,s1302: F11_2D_QUERY_BASE = 95
996<3> F11_2D_CMD_BASE = 6e
997<3> F11_2D_CTRL_BASE = 3d
998<3> F11_2D_DATA_BASE = 15
999<3> synaptics,s3320: F34_FLASH_QUERY_BASE = 26
1000<3> F34_FLASH_CMD_BASE = 0
1001<3> F34_FLASH_CTRL_BASE = a
1002<3> F34_FLASH_DATA_BASE = 0
1003<3>
1004<3>synaptics,s3320: F51_CUSTOM_QUERY_BASE = 3a
1005<3> F51_CUSTOM_CMD_BASE = 0
1006<3> F51_CUSTOM_CTRL_BASE = 1a
1007<3> F51_CUSTOM_DATA_BASE = 0
1008<3> synaptics,s3320: F54_QUERY_BASE = 47
1009<3> F54_CMD_BASE = 46
1010<3> F54_CTRL_BASE = e
1011<3> F54_DATA_BASE = 0
1012<3>
1013<3>touchkey,s1302: CURRENT_FIRMWARE_ID = 0x4
1014<3>[ 7.556665]@0 touchkey,s1302: before fw update,bootloader_mode = 0x0
1015<6>[ 7.562973]@0 input: HWK,synaptics,s1302 as /devices/soc/75b6000.i2c/i2c-8/8-0020/input/input3
1016<3>[ 7.571645]@0 synaptics,s3320: before fw update bootloader_mode[0x0]
1017<13>[ 7.571675]@1 init: init started!
1018<7>[ 7.573202]@1 SELinux: 2048 avtab hash slots, 4859 rules.
1019<6>[ 7.573229]@1 SELinux: Android master kernel running Android M policy in compatibility mode.
1020<7>[ 7.573873]@1 SELinux: 2048 avtab hash slots, 4859 rules.
1021<7>[ 7.573881]@1 SELinux: 1 users, 2 roles, 530 types, 0 bools, 1 sens, 1024 cats
1022<7>[ 7.573885]@1 SELinux: 87 classes, 4859 rules
1023<6>[ 7.574178]@1 SELinux: Permission module_load in class system not defined in policy.
1024<6>[ 7.574357]@1 SELinux: Permission audit_read in class capability2 not defined in policy.
1025<6>[ 7.574367]@1 SELinux: Class can_socket not defined in policy.
1026<6>[ 7.574368]@1 SELinux: the above unknown classes and permissions will be denied
1027<7>[ 7.574385]@1 SELinux: Completing initialization.
1028<7>[ 7.574387]@1 SELinux: Setting up existing superblocks.
1029<7>[ 7.574395]@1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1030<7>[ 7.574411]@1 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
1031<7>[ 7.574811]@1 SELinux: initialized (dev bdev, type bdev), not configured for labeling
1032<7>[ 7.574822]@1 SELinux: initialized (dev proc, type proc), uses genfs_contexts
1033<7>[ 7.574837]@1 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
1034<7>[ 7.597277]@2 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
1035<7>[ 7.597290]@2 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
1036<7>[ 7.597295]@2 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
1037<7>[ 7.597300]@2 SELinux: initialized (dev aio, type aio), not configured for labeling
1038<7>[ 7.597306]@2 SELinux: initialized (dev devpts, type devpts), uses transition SIDs
1039<7>[ 7.597320]@2 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
1040<7>[ 7.597372]@2 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1041<7>[ 7.597385]@2 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
1042<3>[ 7.619062]@0 synaptics,s3320: CURRENT_FIRMWARE_ID = 0x15811001
1043<5>[ 7.622595]@2 audit: type=1403 audit(2939089.209:2): policy loaded auid=4294967295 ses=4294967295
1044<13>[ 7.622920]@2 init: (Initializing SELinux non-enforcing took 0.05s.)
1045<13>[ 7.625520]@2 init: init second stage started!
1046<11>[ 7.625704]@2 init: property_set("ro.boot.bootdevice", "624000.ufshc") failed
1047<11>[ 7.625731]@2 init: property_set("ro.boot.selinux", "permissive") failed
1048<3>[ 7.658530]@0 synaptics,s3320: 0synatpitcs_fw: fw_name = tp/fw_synaptics_15811.img,ts->manu_name:S350815811
1049<3>[ 7.668100]@0 synaptics,s3320: synaptics_init_panel is called!
1050<3>[ 7.673994]@0 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1051<3>[ 7.682230]@0 synaptics,s3320: max_x = 1080,max_y = 1920; max_x_ic = 1079,max_y_ic = 1919
1052<3>[ 7.689524]@0 synaptics,s3320: afte fw update,program memory self-check bootloader_mode = 0x0
1053<3>[ 7.698373]@0 synaptics,s3320: synaptics_soft_reset !!!
1054<3>[ 7.730038]@0 touchkey,s1302: synaptic:ts->irq is 396
1055<3>[ 7.734171]@0 touchkey,s1302: touchkey using poll status:0
1056<3>[ 7.739848]@0 touchkey,s1302: synaptics_soft_reset !!!
1057<3>[ 7.744795]@0 touchkey,s1302: create nodes is successe!
1058<4>[ 7.750012]@0 touchkey,s1302: synaptics_ts_probe s1302: normal end
1059<3>[ 7.756109]@0 touchkey,s1302: boot_time: synaptics_ts_probe return 0
1060<3>[ 7.880307]@0 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x4b !
1061<3>[ 7.887323]@0 synaptics,s3320: synaptics_input_init is called
1062<6>[ 7.892955]@0 input: synaptics,s3320 as /devices/soc/75ba000.i2c/i2c-12/12-0020/input/input4
1063<11>[ 7.939758]@3 init: waitpid failed: No child processes
1064<13>[ 7.944163]@2 init: (Loading properties from /default.prop took 0.00s.)
1065<11>[ 7.950772]@2 init: /init.rc: 62: invalid command 'load_all_props'
1066<11>[ 7.956668]@2 init: could not import file '/init.recovery.logd.rc' from '/init.rc'
1067<3>[ 7.960037]@0 synaptics,s3320: synaptic:ts->irq is 389
1068<3>[ 7.960563]@0 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
1069<3>[ 7.960567]@0 synaptics,s3320: synaptics_init_panel is called!
1070<3>[ 7.960817]@0 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1071<3>[ 7.961738]@0 FG: cc_soc_store_work: nom_cap_uah zero!
1072<3>[ 7.962684]@0 BQ: bq27541_battery_soc: bq27541_battery_soc = 36
1073<6>[ 7.962701]@0 SMBCHG: load_data: stored_soc[0x49], shutdown_soc[36]
1074<6>[ 7.962703]@0 BQ: fg_soc_calibrate: soc=36, soc_load=36
1075<3>[ 7.980566]@0 synaptics,s3320: synaptics_ts_probe: going to create files--tp_fw_update
1076<4>[ 7.980817]@0 synaptics,s3320: synaptics_ts_probe 3203: normal end
1077<13>[ 8.026117]@2 init: (Parsing /init.recovery.usb.rc took 0.00s.)
1078<13>[ 8.031922]@2 init: (Parsing /init.recovery.service.rc took 0.00s.)
1079<13>[ 8.038168]@2 init: (Parsing /init.recovery.qcom.rc took 0.00s.)
1080<13>[ 8.044146]@2 init: (Parsing /init.rc took 0.09s.)
1081<5>[ 8.048958]@2 audit: type=1400 audit(2939089.629:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
1082<5>[ 8.065800]@2 audit: type=1400 audit(2939089.659:4): avc: denied { setcurrent } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
1083<5>[ 8.081376]@2 audit: type=1400 audit(2939089.679:5): avc: denied { dyntransition } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
1084<11>[ 8.097139]@3 init: SELinux: Could not get canonical path /postinstall restorecon: No such file or directory.
1085<13>[ 8.107184]@3 init: Starting service 'ueventd'...
1086<13>[ 8.111807]@3 init: Starting service 'healthd'...
1087<13>[ 8.112804]@2 ueventd: ueventd started!
1088<13>[ 8.120357]@3 init: Waiting for /dev/.coldboot_done...
1089<13>[ 8.903414]@2 ueventd: Coldboot took 0.79s.
1090<13>[ 8.911542]@0 init: Waiting for /dev/.coldboot_done took 0.79s.
1091<7>[ 8.917616]@0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1092<13>[ 8.918239]@0 init: Starting service 'setup-decrypt'...
1093<7>[ 8.922855]@0 SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
1094<7>[ 8.923350]@0 SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
1095<3>[ 8.923472]@0 enable_store: android_usb: already disabled
1096<3>[ 8.928003]@0 functions_store: android_usb: functions_store'adb'
1097<5>[ 8.933776]@3 audit: type=1400 audit(2939090.519:6): avc: denied { write } for pid=401 comm="setup_decrypt" name="kmsg" dev="tmpfs" ino=1517 scontext=u:r:recovery:s0 tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=1
1098<5>[ 8.933793]@3 audit: type=1400 audit(2939090.519:7): avc: denied { open } for pid=401 comm="setup_decrypt" path="/dev/kmsg" dev="tmpfs" ino=1517 scontext=u:r:recovery:s0 tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=1
1099<12>[ 8.933824]@3 setup_decrypt: Mounting /system read-only
1100<13>[ 8.980766]@2 init: (Loading properties from /system/build.prop took 0.00s.)
1101<6>[ 8.983928]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts: (null)
1102<7>[ 8.983943]@3 SELinux: initialized (dev sde20, type ext4), uses xattr
1103<13>[ 8.995533]@2 init: (Loading properties from /vendor/build.prop took 0.00s.)
1104<12>[ 8.997016]@3 setup_decrypt: Copying decryption libraries from /system
1105<5>[ 9.001052]@3 audit: type=1400 audit(2939090.589:8): avc: denied { write } for pid=409 comm="cp" name="sbin" dev="rootfs" ino=8729 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1106<5>[ 9.001067]@3 audit: type=1400 audit(2939090.589:9): avc: denied { remove_name } for pid=409 comm="cp" name="qseecomd" dev="rootfs" ino=8967 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1107<5>[ 9.001076]@3 audit: type=1400 audit(2939090.589:10): avc: denied { unlink } for pid=409 comm="cp" name="qseecomd" dev="rootfs" ino=8967 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1108<5>[ 9.001107]@3 audit: type=1400 audit(2939090.589:11): avc: denied { add_name } for pid=409 comm="cp" name="qseecomd" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1109<5>[ 9.020091]@3 random: sed urandom read with 90 bits of entropy available
1110<13>[ 9.091432]@2 init: (Loading properties from /factory/factory.prop took 0.00s.)
1111<11>[ 9.099581]@2 init: avc: denied { set } for property=crypto.using_system_libs scontext=u:r:recovery:s0 tcontext=u:object_r:vold_prop:s0 tclass=property_service
1112<13>[ 9.113058]@2 init: (Loading properties from /data/local.prop took 0.00s.)
1113<12>[ 9.113905]@3 setup_decrypt: Using system decryption libraries!
1114<11>[ 9.125836]@2 init: Unable to open persistent property directory "/data/property": No such file or directory
1115<13>[ 9.135681]@2 init: Service 'setup-decrypt' (pid 398) exited with status 0
1116<13>[ 9.142698]@2 init: Starting service 'set_permissive'...
1117<13>[ 9.147853]@2 init: Starting service 'recovery'...
1118<3>[ 9.153079]@2 functions_store: android_usb: functions_store'mtp,adb'
1119<13>[ 9.158955]@2 init: Service 'set_permissive' (pid 419) exited with status 0
1120<13>[ 9.165906]@2 init: Starting service 'adbd'...
1121<11>[ 9.170518]@2 init: avc: denied { set } for property=twrp.crash_counter scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
1122<6>[ 9.172053]@0 ep0_open success!
1123<6>[ 9.172064]@0 read descriptors
1124<6>[ 9.172074]@0 read strings
1125<6>[ 9.172098]@0 mtp_bind_config
1126<6>[ 9.172107]@0 mtp_create_bulk_endpoints: useFixAddr:false
1127<3>[ 9.201757]@2 dwc3 6a00000.dwc3: ep0out: Unable to dequeue while in LPM
1128<13>[ 9.208240]@2 init: Service 'adbd' is being killed...
1129<6>[ 9.213295]@2 mtp_bind_config
1130<6>[ 9.216124]@2 mtp_create_bulk_endpoints: useFixAddr:false
1131<3>[ 9.221645]@2 ffs_function_bind_config: ffs_function_bind_config(): usb_add_function() fails (err:-19) for ffs
1132<4>[ 9.228667]@1 mdss_dsi_on start
1133<6>[ 9.228672]@1 get_param_by_index_and_offset[75] sid_index = 2 offset = 32 buf = ffffffc17317ef70 length = 4
1134<3>[ 9.228676]@1 mdss_dsi_on:srgb mode 0
1135<6>[ 9.228678]@1 get_param_by_index_and_offset[75] sid_index = 2 offset = 36 buf = ffffffc17317efb8 length = 4
1136<3>[ 9.228680]@1 mdss_dsi_on:srgb mode 0
1137<6>[ 9.228682]@1 get_param_by_index_and_offset[75] sid_index = 2 offset = 40 buf = ffffffc17317f000 length = 4
1138<3>[ 9.228685]@1 mdss_dsi_on:srgb mode 0
1139<4>[ 9.228688]@1 mdss_dsi_on end
1140<3>[ 9.277947]@2 android_bind_enabled_functions: android_bind_enabled_functions: ffs failed
1141<3>[ 9.286049]@2 android_enable: android_enable: usb_add_config failed : err: -19
1142<3>[ 9.293225]@2 enable_store: enable_store: android_enable failed
1143<3>[ 9.299151]@0 dwc3 6a00000.dwc3: ep0out: Unable to dequeue while in LPM
1144<4>[ 9.305919]@0 ------------[ cut here ]------------
1145<4>[ 9.310479]@0 WARNING: CPU: 0 PID: 425 at ../drivers/usb/gadget/composite.c:1028 0xffffffc0005a81e4()
1146<4>[ 9.319682]@0 CPU: 0 PID: 425 Comm: adbd Not tainted 3.18.31-twrp-3.0 #1
1147<4>[ 9.326361]@0 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro + PMI8996 MTP (DT)
1148<0>[ 9.334349]@0 Call trace:
1149<4>[ 9.336952]@0 [<ffffffc000088650>] 0xffffffc000088650
1150<4>[ 9.341987]@0 [<ffffffc000088754>] 0xffffffc000088754
1151<4>[ 9.347023]@0 [<ffffffc0008d8434>] 0xffffffc0008d8434
1152<4>[ 9.352056]@0 [<ffffffc00009f4e4>] 0xffffffc00009f4e4
1153<4>[ 9.357091]@0 [<ffffffc00009f5e8>] 0xffffffc00009f5e8
1154<4>[ 9.362123]@0 [<ffffffc0005a81e4>] 0xffffffc0005a81e4
1155<4>[ 9.367160]@0 [<ffffffc0005d005c>] 0xffffffc0005d005c
1156<4>[ 9.372195]@0 [<ffffffc0005d0658>] 0xffffffc0005d0658
1157<4>[ 9.377230]@0 [<ffffffc0005b7250>] 0xffffffc0005b7250
1158<4>[ 9.382265]@0 [<ffffffc0005b7508>] 0xffffffc0005b7508
1159<4>[ 9.387298]@0 [<ffffffc0005b7590>] 0xffffffc0005b7590
1160<4>[ 9.392333]@0 [<ffffffc00017ffb0>] 0xffffffc00017ffb0
1161<4>[ 9.397367]@0 [<ffffffc0001800b8>] 0xffffffc0001800b8
1162<4>[ 9.402403]@0 [<ffffffc0000b7400>] 0xffffffc0000b7400
1163<4>[ 9.407436]@0 [<ffffffc0000a1ba4>] 0xffffffc0000a1ba4
1164<4>[ 9.412473]@0 [<ffffffc0000a20cc>] 0xffffffc0000a20cc
1165<4>[ 9.417506]@0 [<ffffffc0000abe1c>] 0xffffffc0000abe1c
1166<4>[ 9.422540]@0 [<ffffffc000087b98>] 0xffffffc000087b98
1167<4>[ 9.427578]@0 [<ffffffc000088210>] 0xffffffc000088210
1168<4>[ 9.432613]@0 ---[ end trace 9f838dd3688c824b ]---
1169<13>[ 9.439291]@3 init: Service 'adbd' (pid 422) killed by signal 9
1170<13>[ 9.444349]@3 init: Service 'adbd' (pid 422) killing any children in process group
1171<4>[ 9.601054]@1 mdss_dsi_off start
1172<4>[ 9.629587]@1 mdss_dsi_off end
1173<4>[ 9.639147]@1 mdss_dsi_on start
1174<4>[ 9.675684]@1 mdss_dsi_on end
1175<4>[ 9.703236]@1 --------backlight level = 127---------
1176<4>[ 9.738138]@0 blank off start
1177<3>[ 9.738152]@0 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen off
1178<3>[ 9.738184]@0 synaptics,s3320: fb_notifier_callback blank[4],event[0x10]
1179<3>[ 9.738187]@0 synaptics,s3320: fb_notifier_callback : going TP suspend start
1180<3>[ 9.738191]@0 synaptics,s3320: synaptics_ts_suspend enter
1181<3>[ 9.738197]@0 synaptics,s3320: synaptics_ts_suspend normal end
1182<3>[ 9.738199]@0 synaptics,s3320: fb_notifier_callback : going TP suspend end
1183<4>[ 9.738309]@0 --------backlight level = 0---------
1184<6>[ 9.900822]@2 of_batterydata_get_best_profile: OP_3400mAH found
1185<6>[ 9.913583]@2 FG: fg_batt_profile_init: Battery SOC: 13, V: 3911415uV
1186<4>[ 9.943578]@0 mdss_dsi_off start
1187<4>[ 9.970443]@0 mdss_dsi_off end
1188<3>[ 9.972494]@1 synaptics,s3320: fb_notifier_callback blank[4],event[0x9]
1189<4>[ 9.972522]@1 blank off end
1190<4>[ 10.045519]@2 blank on start
1191<3>[ 10.046215]@2 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen on
1192<3>[ 10.046236]@2 synaptics,s3320: fb_notifier_callback blank[0],event[0x10]
1193<3>[ 10.046239]@2 synaptics,s3320: fb_notifier_callback going TP resume start
1194<3>[ 10.046242]@2 synaptics,s3320: synaptics_ts_resume enter!
1195<3>[ 10.046257]@2 synaptics,s3320: synaptics_ts_resume:normal end!
1196<3>[ 10.046258]@2 synaptics,s3320: fb_notifier_callback going TP resume end
1197<4>[ 10.047833]@0 mdss_dsi_on start
1198<3>[ 10.050060]@0 synaptics,s3320: tp_baseline_get start!
1199<3>[ 10.082935]@0 sps: BAM device 0x0000000007584000 is not registered yet.
1200<6>[ 10.083107]@0 sps:BAM 0x0000000007584000 is registered.
1201<6>sps:BAM 0x0000000007584000 (va:0xffffff8006300000) enabled: ver:0x19, number of pipes:24
1202<4>[ 10.085557]@1 mdss_dsi_on end
1203<4>[ 10.107263]@1 --------backlight level = 127---------
1204<6>[ 10.108398]@1 BQ: bq27541_set_lcd_off_status: off=0
1205<3>[ 10.108631]@1 synaptics,s3320: fb_notifier_callback blank[0],event[0x9]
1206<4>[ 10.108634]@1 blank on end
1207<3>[ 10.130384]@1 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
1208<3>[ 10.130388]@1 synaptics,s3320: synaptics_init_panel is called!
1209<3>[ 10.130636]@1 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1210<3>[ 10.200916]@0 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x4b !
1211<3>[ 10.201122]@0 synaptics,s3320: tp_baseline_get end!
1212<3>[ 10.233771]@3 mdss_dsi_post_panel_on:+
1213<3>[ 10.250557]@2 mdss_dsi_post_panel_on:-
1214<6>[ 10.299334]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2e4b7ba5)
1215<3>[ 10.305980]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1216<6>[ 10.315027]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2c3a3d42)
1217<3>[ 10.321659]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1218<6>[ 10.329110]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2e4b7ba5)
1219<3>[ 10.336760]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1220<6>[ 10.344228]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2c3a3d42)
1221<3>[ 10.351862]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1222<6>[ 10.361361]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2e4b7ba5)
1223<3>[ 10.367973]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1224<6>[ 10.375615]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2c3a3d42)
1225<3>[ 10.383092]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1226<6>[ 10.390559]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2e4b7ba5)
1227<3>[ 10.398183]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1228<6>[ 10.405858]@3 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2c3a3d42)
1229<3>[ 10.413298]@3 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1230<6>[ 10.429938]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2e4b7ba5)
1231<3>[ 10.436573]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1232<6>[ 10.444228]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2c3a3d42)
1233<3>[ 10.451676]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1234<6>[ 10.459135]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2e4b7ba5)
1235<3>[ 10.466778]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1236<6>[ 10.474243]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2c3a3d42)
1237<3>[ 10.481907]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1238<6>[ 10.491161]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2e4b7ba5)
1239<3>[ 10.497780]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1240<6>[ 10.505441]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2c3a3d42)
1241<3>[ 10.512897]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1242<6>[ 10.520361]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2e4b7ba5)
1243<3>[ 10.527989]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1244<6>[ 10.535473]@2 F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x2c3a3d42)
1245<3>[ 10.543131]@2 F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1246<6>[ 10.559914]@3 EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
1247<7>[ 10.566411]@3 SELinux: initialized (dev sda3, type ext4), uses xattr
1248<6>[ 10.566850]@3 SELinux: Context u:object_r:cache_recovery_file:s0 is not valid (left unmapped).
1249<3>[ 11.290119]@2 switch_dev_work ,tristatekey set to state(2)
1250<3>[ 11.840221]@1 SMBCHG: smbchg_re_det_chg_type: Re-detect charger type
1251<6>[ 11.845607]@1 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 300, typeC_support_current_ma = 4000
1252<3>[ 11.855174]@1 SMBCHG: smbchg_re_det_chg_type: Faking Removal
1253<6>[ 11.861390]@3 SMBCHG: usbin_uv_handler: triggered
1254<6>[ 11.861529]@0 SMBCHG: src_detect_handler: chip->usb_present = 1 usb_present = 0 src_detect = 0 hvdcp_3_det_ignore_uv=0
1255<6>[ 11.861555]@0 SMBCHG: handle_usb_removal: triggered
1256<6>[ 11.862207]@0 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = 1, online = 0
1257<3>[ 11.888758]@3 SMBCHG: usbin_uv_handler: chip->usb_present = 0 rt_sts = 0x01 hvdcp_3_det_ignore_uv = 0 aicl = 300
1258<3>[ 11.916128]@0 msm-usb-ssphy-qmp 7410000.ssphy: QMP PHY initialization timeout
1259<3>[ 11.922244]@0 msm-usb-ssphy-qmp 7410000.ssphy: USB3_PHY_PCS_STATUS:69696969
1260<6>[ 11.929698]@0 msm-dwc3 6a00000.ssusb: DWC3 in low power mode
1261<3>[ 12.400230]@1 SMBCHG: smbchg_re_det_chg_type: Faking Insertion
1262<6>[ 12.405328]@3 SMBCHG: usbin_uv_handler: triggered
1263<3>[ 12.409789]@3 SMBCHG: usbin_uv_handler: chip->usb_present = 0 rt_sts = 0x00 hvdcp_3_det_ignore_uv = 0 aicl = 300
1264<3>[ 12.678556]@0 synaptics,s3320: start get base data:1
1265<3>[ 12.682618]@0 synaptics,s3320: tp_baseline_get start!
1266<3>[ 12.810568]@0 synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x4b !
1267<3>[ 12.817758]@0 synaptics,s3320: tp_baseline_get end!
1268<3>[ 12.822957]@0 synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
1269<3>[ 12.829804]@0 synaptics,s3320: synaptics_init_panel is called!
1270<3>[ 12.836149]@0 synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1271<6>[ 13.267055]@0 SMBCHG: src_detect_handler: chip->usb_present = 0 usb_present = 1 src_detect = 1 hvdcp_3_det_ignore_uv=0
1272<6>[ 13.276989]@0 SMBCHG: handle_usb_insertion: inserted type = 5 (OTHER)
1273<6>[ 13.277005]@1 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1800, typeC_support_current_ma = 4000
1274<6>[ 13.292822]@0 SMBCHG: smbchg_charging_en: enable=1
1275<6>[ 13.297733]@0 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = 0, online = 1
1276<5>[ 13.363881]@3 random: nonblocking pool is initialized
1277<3>[ 14.034701]@0 synaptics,s3320: all finger up
1278<6>[ 14.420368]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:81
1279<6>[ 14.427962]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:81
1280<6>[ 14.427967]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:81
1281<6>[ 14.427970]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:81
1282<13>[ 14.457943]@0 init: Starting service 'adbd'...
1283<6>[ 14.464028]@0 ep0_open success!
1284<6>[ 14.466282]@0 read descriptors
1285<6>[ 14.466335]@0 read strings
1286<6>[ 14.466399]@0 mtp_bind_config
1287<6>[ 14.467048]@3 mtp_create_bulk_endpoints: useFixAddr:false
1288<6>[ 14.480242]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:57
1289<6>[ 14.488809]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:57
1290<6>[ 14.497418]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:57
1291<6>[ 14.506032]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:57
1292<4>[ 15.760126]@0 synap rmidev_create_attr
1293<4>[ 16.000138]@0 synap rmidev_create_attr
1294<3>[ 16.623370]@1 synaptics,s3320: all finger up
1295<6>[ 17.060263]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:83
1296<6>[ 17.067847]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:83
1297<6>[ 17.076507]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:83
1298<6>[ 17.085082]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:83
1299<6>[ 17.130226]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:59
1300<6>[ 17.137798]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:59
1301<6>[ 17.146404]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:59
1302<6>[ 17.154995]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:59
1303<13>[ 18.401105]@1 init: Starting service 'qseecomd'...
1304<4>[ 18.411805]@3 audit_printk_skb: 33 callbacks suppressed
1305<5>[ 18.415994]@3 audit: type=1400 audit(2939099.999:23): avc: denied { read } for pid=444 comm="qseecomd" name="sg8" dev="tmpfs" ino=1491 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1306<5>[ 18.435685]@3 audit: type=1400 audit(2939100.019:24): avc: denied { open } for pid=444 comm="qseecomd" path="/dev/sg8" dev="tmpfs" ino=1491 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1307<5>[ 18.462424]@3 audit: type=1400 audit(2939100.049:25): avc: denied { sys_rawio } for pid=444 comm="qseecomd" capability=17 scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=capability permissive=1
1308<5>[ 18.479827]@3 audit: type=1400 audit(2939100.059:26): avc: denied { ioctl } for pid=444 comm="qseecomd" path="/dev/sg8" dev="tmpfs" ino=1491 ioctlcmd=5382 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1309<5>[ 18.480089]@3 audit: type=1400 audit(2939100.069:27): avc: denied { setattr } for pid=444 comm="qseecomd" name="sg2" dev="tmpfs" ino=1495 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1310<5>[ 18.480107]@3 audit: type=1400 audit(2939100.069:28): avc: denied { write } for pid=444 comm="qseecomd" name="sg2" dev="tmpfs" ino=1495 scontext=u:r:recovery:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
1311<6>[ 18.481402]@3 capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
1312<11>[ 18.486853]@1 init: avc: denied { set } for property=sys.listeners.registered scontext=u:r:recovery:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service
1313<6>[ 19.036026]@1 SMBCHG: update_heartbeat: inserted charger type = 5 (OTHER), charger_type = 5
1314<6>[ 19.059610]@1 SMBCHG: update_heartbeat: charger_type:5,bat_voltage:3901,charger_voltage:4794,current:-1133,temp:360,capacity:36
1315<6>[ 19.110270]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:80
1316<6>[ 19.117849]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:80
1317<6>[ 19.126469]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:80
1318<6>[ 19.135109]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:80
1319<6>[ 19.180264]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:56
1320<6>[ 19.187862]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:56
1321<6>[ 19.187869]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:56
1322<6>[ 19.187872]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:56
1323<6>[ 19.430437]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:85
1324<6>[ 19.438024]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:85
1325<6>[ 19.446642]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:85
1326<6>[ 19.455286]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:85
1327<6>[ 19.650289]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1056000. Temp:84
1328<6>[ 19.657903]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1056000. Temp:84
1329<6>[ 19.657912]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1670400. Temp:84
1330<6>[ 19.657914]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1670400. Temp:84
1331<6>[ 19.700287]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:67
1332<6>[ 19.707880]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:67
1333<6>[ 19.716506]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:67
1334<6>[ 19.725103]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:67
1335<6>[ 19.790239]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:64
1336<6>[ 19.797828]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:64
1337<6>[ 19.811841]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:64
1338<6>[ 19.811850]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:64
1339<6>[ 19.920207]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:86
1340<6>[ 19.927791]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:86
1341<6>[ 19.936652]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:86
1342<6>[ 19.936659]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:86
1343<6>[19700204_00:25:01.880149]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:66
1344<6>[19700204_00:25:01.888790]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:66
1345<6>[19700204_00:25:01.898485]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:66
1346<6>[19700204_00:25:01.908101]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:66
1347<6>[19700204_00:25:02.060029]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:80
1348<6>[19700204_00:25:02.068656]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:80
1349<6>[19700204_00:25:02.078352]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:80
1350<6>[19700204_00:25:02.078358]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:80
1351<6>[19700204_00:25:02.270033]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:62
1352<6>[19700204_00:25:02.278664]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:62
1353<6>[19700204_00:25:02.278668]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:62
1354<6>[19700204_00:25:02.278671]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:62
1355<6>[19700204_00:25:03.420039]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:82
1356<6>[19700204_00:25:03.428670]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:82
1357<6>[19700204_00:25:03.439964]@1 get_param_by_index_and_offset[75] sid_index = 7 offset = 24 buf = ffffffc174b6bd00 length = 4
1358<6>[19700204_00:25:03.441451]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:82
1359<6>[19700204_00:25:03.441455]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:82
1360<6>[19700204_00:25:03.469361]@1 SMBCHG: charger_type_record: charger_type_record: charger_type_record: param_value = 19700204_00:25:03|2,dash_present=0
1361<6>[19700204_00:25:03.469391]@1 set_param_by_index_and_offset[99]sid_index = 7 offset = 828 buf = ffffffc174b6bd60 length = 4
1362<5>[19700204_00:25:03.469680]@1 audit: type=1400 audit(2939103.449:29): avc: denied { read write } for pid=163 comm="kworker/1:1" name="sda11" dev="tmpfs" ino=1303 scontext=u:r:kernel:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
1363<5>[19700204_00:25:03.469776]@1 audit: type=1400 audit(2939103.449:30): avc: denied { open } for pid=163 comm="kworker/1:1" path="/dev/block/sda11" dev="tmpfs" ino=1303 scontext=u:r:kernel:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
1364<6>[19700204_00:25:03.472335]@1 set_param_by_index_and_offset[99]sid_index = 7 offset = 832 buf = ffffffc174b6bd64 length = 4
1365<6>[19700204_00:25:03.472849]@1 set_param_by_index_and_offset[99]sid_index = 7 offset = 836 buf = ffffffc174b6bd68 length = 4
1366<6>[19700204_00:25:03.473365]@1 set_param_by_index_and_offset[99]sid_index = 7 offset = 840 buf = ffffffc174b6bd6c length = 4
1367<6>[19700204_00:25:03.473841]@1 set_param_by_index_and_offset[99]sid_index = 7 offset = 844 buf = ffffffc174b6bd70 length = 4
1368<6>[19700204_00:25:03.474346]@1 set_param_by_index_and_offset[99]sid_index = 7 offset = 24 buf = ffffffc174b6bd00 length = 4
1369<6>[19700204_00:25:03.493121]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:68
1370<6>[19700204_00:25:03.493127]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:68
1371<6>[19700204_00:25:03.493131]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:68
1372<6>[19700204_00:25:03.493134]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:68
1373<6>[19700204_00:25:03.710009]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:89
1374<6>[19700204_00:25:03.718641]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:89
1375<6>[19700204_00:25:03.718645]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:89
1376<6>[19700204_00:25:03.718647]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:89
1377<3>[19700204_00:25:03.769701]@2 QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -65,app_id = 0,lstr = 12288
1378<6>[19700204_00:25:03.778796]@2 get_ice_device_from_storage_type: found ice device ffffffc0b5dc1c00
1379<3>[19700204_00:25:03.915273]@0 QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -71,app_id = 0,lstr = 12288
1380<3>[19700204_00:25:03.924574]@3 QSEECOM: __qseecom_set_clear_ce_key: process_incomplete_cmd FAILED, resp.result -71
1381<6>[19700204_00:25:03.924581]@3 get_ice_device_from_storage_type: found ice device ffffffc0b5dc1c00
1382<3>[19700204_00:25:03.925133]@3 QSEECOM: qseecom_create_key: Failed to create key: pipe 2, ce 0: -22
1383<3>[19700204_00:25:03.925139]@3 QSEECOM: qseecom_ioctl: failed to create encryption key: -22
1384<6>[19700204_00:25:03.970109]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1056000. Temp:80
1385<6>[19700204_00:25:03.978735]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1056000. Temp:80
1386<6>[19700204_00:25:03.988381]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1670400. Temp:80
1387<6>[19700204_00:25:03.998078]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1670400. Temp:80
1388<6>[19700204_00:25:04.350184]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:67
1389<6>[19700204_00:25:04.358816]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:67
1390<6>[19700204_00:25:04.368467]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:67
1391<6>[19700204_00:25:04.378130]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:67
1392<6>[19700204_00:25:04.480052]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:69
1393<6>[19700204_00:25:04.488682]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:69
1394<6>[19700204_00:25:04.498359]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:69
1395<6>[19700204_00:25:04.508004]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:69
1396<6>[19700204_00:25:04.610025]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:80
1397<6>[19700204_00:25:04.618652]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:80
1398<6>[19700204_00:25:04.628320]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:80
1399<6>[19700204_00:25:04.637970]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:80
1400<6>[19700204_00:25:05.290026]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:69
1401<6>[19700204_00:25:05.298652]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:69
1402<6>[19700204_00:25:05.308318]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:69
1403<6>[19700204_00:25:05.317956]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:69
1404<6>[19700204_00:25:06.270055]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:89
1405<6>[19700204_00:25:06.278682]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:89
1406<6>[19700204_00:25:06.295448]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:89
1407<6>[19700204_00:25:06.295453]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:89
1408<3>[19700204_00:25:06.746871]@2 scm_call failed: func id 0x72000501, ret: -2, syscall returns: 0xffffffffffffffbf, 0x0, 0x0
1409<6>[19700204_00:25:06.756530]@2 get_ice_device_from_storage_type: found ice device ffffffc0b5dc1c00
1410<6>[19700204_00:25:06.897012]@2 get_ice_device_from_storage_type: found ice device ffffffc0b5dc1c00
1411<3>[19700204_00:25:06.904867]@2 QSEECOM: qseecom_create_key: Set the key successfully
1412<5>[19700204_00:25:06.912010]@2 audit: type=1400 audit(2939106.899:31): avc: denied { read write } for pid=443 comm="recovery" name="device-mapper" dev="tmpfs" ino=1583 scontext=u:r:recovery:s0 tcontext=u:object_r:dm_device:s0 tclass=chr_file permissive=1
1413<6>[19700204_00:25:06.930195]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:66
1414<6>[19700204_00:25:06.930202]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:66
1415<6>[19700204_00:25:06.930205]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:66
1416<6>[19700204_00:25:06.930209]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:66
1417<5>[19700204_00:25:06.972709]@2 audit: type=1400 audit(2939106.959:32): avc: denied { open } for pid=443 comm="recovery" path="/dev/device-mapper" dev="tmpfs" ino=1583 scontext=u:r:recovery:s0 tcontext=u:object_r:dm_device:s0 tclass=chr_file permissive=1
1418<5>[19700204_00:25:06.972739]@2 audit: type=1400 audit(2939106.959:33): avc: denied { ioctl } for pid=443 comm="recovery" path="/dev/device-mapper" dev="tmpfs" ino=1583 ioctlcmd=fd03 scontext=u:r:recovery:s0 tcontext=u:object_r:dm_device:s0 tclass=chr_file permissive=1
1419<6>[19700204_00:25:06.973373]@2 device-mapper: req-crypt: req_crypt_ctr: Mapping block_device /dev/block/sda15 to dm-req-crypt ok!
1420<6>
1421<4>[19700204_00:25:06.973580]@2 device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
1422<4>[19700204_00:25:06.973587]@2 device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
1423<6>[19700204_00:25:07.140023]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:84
1424<6>[19700204_00:25:07.148651]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:84
1425<6>[19700204_00:25:07.164803]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:84
1426<6>[19700204_00:25:07.173499]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:84
1427<6>[19700204_00:25:07.230054]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:66
1428<6>[19700204_00:25:07.230061]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:66
1429<6>[19700204_00:25:07.230065]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:66
1430<6>[19700204_00:25:07.230068]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:66
1431<6>[19700204_00:25:07.280036]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:88
1432<6>[19700204_00:25:07.288676]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:88
1433<6>[19700204_00:25:07.288681]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:88
1434<6>[19700204_00:25:07.288685]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:88
1435<6>[19700204_00:25:07.338719]@2 F2FS-fs (dm-0): Magic Mismatch, valid(0xf2f52010) - read(0x35a520)
1436<3>[19700204_00:25:07.346160]@2 F2FS-fs (dm-0): Can't find valid F2FS filesystem in 1th superblock
1437<6>[19700204_00:25:07.354940]@2 F2FS-fs (dm-0): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
1438<3>[19700204_00:25:07.363024]@2 F2FS-fs (dm-0): Can't find valid F2FS filesystem in 2th superblock
1439<6>[19700204_00:25:07.363049]@2 F2FS-fs (dm-0): Magic Mismatch, valid(0xf2f52010) - read(0x35a520)
1440<3>[19700204_00:25:07.363052]@2 F2FS-fs (dm-0): Can't find valid F2FS filesystem in 1th superblock
1441<6>[19700204_00:25:07.363056]@2 F2FS-fs (dm-0): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
1442<3>[19700204_00:25:07.363059]@2 F2FS-fs (dm-0): Can't find valid F2FS filesystem in 2th superblock
1443<6>[19700204_00:25:07.368188]@2 EXT4-fs (dm-0): 2 orphan inodes deleted
1444<6>[19700204_00:25:07.368194]@2 EXT4-fs (dm-0): recovery complete
1445<6>[19700204_00:25:07.373916]@2 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
1446<7>[19700204_00:25:07.373933]@2 SELinux: initialized (dev dm-0, type ext4), uses xattr
1447<6>[19700204_00:25:07.380353]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:67
1448<6>[19700204_00:25:07.380359]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:67
1449<6>[19700204_00:25:07.380363]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:67
1450<6>[19700204_00:25:07.380367]@3 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:67
1451<3>[19700204_00:25:08.418089]@0 EXT4-fs (dm-0): Unrecognized mount option "noatime" or missing value
1452<6>[19700204_00:25:08.434218]@1 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
1453<7>[19700204_00:25:08.442274]@2 SELinux: initialized (dev dm-0, type ext4), uses xattr
1454<5>[19700204_00:25:08.442987]@2 audit: type=1400 audit(2939108.429:34): avc: denied { getattr } for pid=443 comm="recovery" path="/data/media" dev="dm-0" ino=1545265 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1455<6>[19700204_00:25:08.483978]@1 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
1456<7>[19700204_00:25:08.491538]@1 SELinux: initialized (dev sde20, type ext4), uses xattr
1457<3>[19700204_00:25:08.503275]@0 EXT4-fs (dm-0): Unrecognized mount option "noatime" or missing value
1458<6>[19700204_00:25:08.513242]@0 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
1459<7>[19700204_00:25:08.521147]@0 SELinux: initialized (dev dm-0, type ext4), uses xattr
1460<5>[19700204_00:25:08.534983]@3 audit: type=1400 audit(2939108.519:35): avc: denied { read } for pid=443 comm="recovery" name="/" dev="dm-0" ino=2 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
1461<5>[19700204_00:25:08.554633]@3 audit: type=1400 audit(2939108.539:36): avc: denied { open } for pid=443 comm="recovery" path="/data" dev="dm-0" ino=2 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
1462<5>[19700204_00:25:08.556742]@3 audit: type=1400 audit(2939108.539:37): avc: denied { getattr } for pid=443 comm="recovery" path="/data/bootchart" dev="dm-0" ino=2943361 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
1463<5>[19700204_00:25:08.556764]@3 audit: type=1400 audit(2939108.539:38): avc: denied { read } for pid=443 comm="recovery" name="bootchart" dev="dm-0" ino=2943361 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
1464<5>[19700204_00:25:08.556775]@3 audit: type=1400 audit(2939108.539:39): avc: denied { open } for pid=443 comm="recovery" path="/data/bootchart" dev="dm-0" ino=2943361 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
1465<5>[19700204_00:25:08.558039]@3 audit: type=1400 audit(2939108.539:40): avc: denied { getattr } for pid=443 comm="recovery" path="/data/misc/bluedroid" dev="dm-0" ino=1954065 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=dir permissive=1
1466<6>[19700204_00:25:08.563661]@3 SELinux: Context u:object_r:audioserver_data_file:s0 is not valid (left unmapped).
1467<6>[19700204_00:25:08.563915]@3 SELinux: Context u:object_r:boottrace_data_file:s0 is not valid (left unmapped).
1468<6>[19700204_00:25:08.564001]@3 SELinux: Context u:object_r:update_engine_data_file:s0 is not valid (left unmapped).
1469<6>[19700204_00:25:08.564067]@3 SELinux: Context u:object_r:method_trace_data_file:s0 is not valid (left unmapped).
1470<6>[19700204_00:25:08.564194]@3 SELinux: Context u:object_r:user_profile_data_file:s0 is not valid (left unmapped).
1471<6>[19700204_00:25:08.564767]@3 SELinux: Context u:object_r:user_profile_data_file:s0:c512,c768 is not valid (left unmapped).
1472<6>[19700204_00:25:08.666130]@3 SELinux: Context u:object_r:profman_dump_data_file:s0 is not valid (left unmapped).
1473<6>[19700204_00:25:08.666345]@3 SELinux: Context u:object_r:qfp-daemon_data_file:s0 is not valid (left unmapped).
1474<6>[19700204_00:25:08.666637]@3 SELinux: Context u:object_r:data_qsee_file:s0 is not valid (left unmapped).
1475<6>[19700204_00:25:08.666981]@3 SELinux: Context u:object_r:ipacm_data_file:s0 is not valid (left unmapped).
1476<6>[19700204_00:25:08.667046]@3 SELinux: Context u:object_r:port_bridge_data_file:s0 is not valid (left unmapped).
1477<6>[19700204_00:25:08.667145]@3 SELinux: Context u:object_r:data_test_data_file:s0 is not valid (left unmapped).
1478<6>[19700204_00:25:08.667672]@3 SELinux: Context u:object_r:display_misc_file:s0 is not valid (left unmapped).
1479<6>[19700204_00:25:08.667775]@3 SELinux: Context u:object_r:location_data_file:s0 is not valid (left unmapped).
1480<6>[19700204_00:25:08.667926]@3 SELinux: Context u:object_r:location_socket:s0 is not valid (left unmapped).
1481<6>[19700204_00:25:08.668581]@0 SELinux: Context u:object_r:fm_data_file:s0 is not valid (left unmapped).
1482<6>[19700204_00:25:08.668719]@0 SELinux: Context u:object_r:RIDL_data_file:s0 is not valid (left unmapped).
1483<6>[19700204_00:25:08.669535]@3 SELinux: Context u:object_r:RIDL_socket:s0 is not valid (left unmapped).
1484<6>[19700204_00:25:08.669908]@3 SELinux: Context u:object_r:iop_data_file:s0 is not valid (left unmapped).
1485<6>[19700204_00:25:08.670005]@3 SELinux: Context u:object_r:qti_logkit_priv_data_file:s0 is not valid (left unmapped).
1486<6>[19700204_00:25:08.670159]@3 SELinux: Context u:object_r:qti_logkit_pub_data_file:s0 is not valid (left unmapped).
1487<6>[19700204_00:25:08.670241]@3 SELinux: Context u:object_r:qti_logkit_priv_socket:s0 is not valid (left unmapped).
1488<6>[19700204_00:25:08.670323]@3 SELinux: Context u:object_r:qti_logkit_pub_socket:s0 is not valid (left unmapped).
1489<6>[19700204_00:25:08.670444]@3 SELinux: Context u:object_r:wapi_data_file:s0 is not valid (left unmapped).
1490<6>[19700204_00:25:08.670504]@3 SELinux: Context u:object_r:dts_data_file:s0 is not valid (left unmapped).
1491<6>[19700204_00:25:08.670547]@3 SELinux: Context u:object_r:seemp_file:s0 is not valid (left unmapped).
1492<6>[19700204_00:25:08.670602]@3 SELinux: Context u:object_r:tlocd_data_file:s0 is not valid (left unmapped).
1493<6>[19700204_00:25:08.670647]@3 SELinux: Context u:object_r:qvop_data_file:s0 is not valid (left unmapped).
1494<6>[19700204_00:25:08.670688]@3 SELinux: Context u:object_r:qvrd_data_file:s0 is not valid (left unmapped).
1495<6>[19700204_00:25:08.670729]@3 SELinux: Context u:object_r:audio_pp_data_file:s0 is not valid (left unmapped).
1496<6>[19700204_00:25:08.670773]@3 SELinux: Context u:object_r:bootstat_data_file:s0 is not valid (left unmapped).
1497<6>[19700204_00:25:08.740671]@3 SELinux: Context u:object_r:qsee_svc_app_data_file:s0 is not valid (left unmapped).
1498<6>[19700204_00:25:09.185765]@3 SELinux: Context u:object_r:ota_data_file:s0 is not valid (left unmapped).
1499<6>[19700204_00:25:09.202005]@3 SELinux: Context u:object_r:icon_file:s0 is not valid (left unmapped).
1500<6>[19700204_00:25:09.210020]@3 SELinux: Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
1501<6>[19700204_00:25:09.219496]@3 SELinux: Context u:object_r:swap_data_file:s0 is not valid (left unmapped).
1502<6>[19700204_00:25:09.222990]@3 SELinux: Context u:object_r:ringtone_file:s0 is not valid (left unmapped).
1503<6>[19700204_00:25:09.272374]@3 SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
1504<6>[19700204_00:25:09.281348]@3 SELinux: Context u:object_r:dpmd_data_file:s0 is not valid (left unmapped).
1505<6>[19700204_00:25:09.292180]@3 SELinux: Context u:object_r:time_data_file:s0 is not valid (left unmapped).
1506<6>[19700204_00:25:09.302515]@3 SELinux: Context u:object_r:oem_data_file:s0 is not valid (left unmapped).
1507<6>[19700204_00:25:09.311505]@3 SELinux: Context u:object_r:fpc_images_file:s0 is not valid (left unmapped).
1508<6>[19700204_00:25:09.321491]@3 SELinux: Context u:object_r:fpc_data_file:s0 is not valid (left unmapped).
1509<6>[19700204_00:25:09.330254]@3 SELinux: Context u:object_r:coredump_data_file:s0 is not valid (left unmapped).
1510<6>[19700204_00:25:09.340021]@3 SELinux: Context u:object_r:theme_data_file:s0 is not valid (left unmapped).
1511<6>[19700204_00:25:09.350672]@3 SELinux: Context u:object_r:usf_data_file:s0 is not valid (left unmapped).
1512<3>[19700204_00:25:09.496362]@2 EXT4-fs (dm-0): Unrecognized mount option "noatime" or missing value
1513<6>[19700204_00:25:09.510075]@0 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
1514<7>[19700204_00:25:09.518175]@3 SELinux: initialized (dev dm-0, type ext4), uses xattr
1515<6>[20170121_10:07:28.116357]@3 EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts:
1516<7>[20170121_10:07:28.123803]@3 SELinux: initialized (dev sde20, type ext4), uses xattr
1517<6>[20170121_10:07:28.908378]@2 mtp_open
1518<6>[20170121_10:07:39.825863]@2 SMBCHG: usbin_uv_handler: triggered
1519<3>[20170121_10:07:39.825991]@3 fusb301 7-0021: fusb301_irq_thread: type<5> int(0x02)
1520<3>[20170121_10:07:39.826021]@3 fusb301 7-0021: fusb301_irq_thread: Detach interrupt!
1521<6>[20170121_10:07:39.826428]@0 SMBCHG: src_detect_handler: chip->usb_present = 1 usb_present = 0 src_detect = 0 hvdcp_3_det_ignore_uv=0
1522<6>[20170121_10:07:39.826489]@0 SMBCHG: handle_usb_removal: triggered
1523<6>[20170121_10:07:39.826508]@0 SMBCHG: handle_usb_removal: switch off fastchg
1524<6>[20170121_10:07:39.826527]@0 FASTCHG: usb_sw_gpio_set: set usb_sw_gpio = 0
1525<6>[20170121_10:07:39.826570]@0 SMBCHG: qpnp_battery_temp_region_set: set temp_region = 8
1526<6>[20170121_10:07:39.826640]@0 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0, typeC_support_current_ma = 4000
1527<6>[20170121_10:07:39.826659]@0 SMBCHG: smbchg_usb_suspend: suspend=1
1528<6>[20170121_10:07:39.828575]@0 SMBCHG: set_dash_charger_present: dash_present = 0, charger_present = 0
1529<6>[20170121_10:07:39.828625]@3 SMBCHG: handle_usb_removal: triggered
1530<6>[20170121_10:07:39.828650]@3 SMBCHG: handle_usb_removal: switch off fastchg
1531<6>[20170121_10:07:39.828670]@3 FASTCHG: usb_sw_gpio_set: set usb_sw_gpio = 0
1532<6>[20170121_10:07:39.828716]@3 SMBCHG: qpnp_battery_temp_region_set: set temp_region = 8
1533<6>[20170121_10:07:39.828749]@3 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1800, typeC_support_current_ma = 4000
1534<6>[20170121_10:07:39.828769]@3 SMBCHG: smbchg_usb_suspend: suspend=0
1535<6>[20170121_10:07:39.829026]@3 SMBCHG: smbchg_rerun_aicl: Rerunning AICL...
1536<6>[20170121_10:07:39.829278]@0 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = 1, online = 0
1537<6>[20170121_10:07:39.898199]@0 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0, typeC_support_current_ma = 4000
1538<6>[20170121_10:07:39.898227]@0 SMBCHG: smbchg_usb_suspend: suspend=1
1539<6>[20170121_10:07:39.898550]@0 SMBCHG: set_dash_charger_present: dash_present = 0, charger_present = 0
1540<6>[20170121_10:07:39.898961]@0 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = 0, online = 0
1541<6>[20170121_10:07:39.948273]@1 msm-dwc3 6a00000.ssusb: Avail curr from USB = 0
1542<3>[20170121_10:07:40.008066]@2 SMBCHG: usbin_uv_handler: chip->usb_present = 0 rt_sts = 0x01 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1543<6>[20170121_10:07:58.622846]@3 SMBCHG: usbin_uv_handler: triggered
1544<3>[20170121_10:07:58.627583]@3 SMBCHG: usbin_uv_handler: chip->usb_present = 0 rt_sts = 0x00 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1545<3>[20170121_10:07:58.659222]@3 fusb301 7-0021: fusb301_irq_thread: type<0> int(0x05)
1546<3>[20170121_10:07:58.665818]@3 fusb301 7-0021: fusb301_irq_thread: Attach interrupt! TYPE is 5, Orient is 1
1547<3>[20170121_10:07:58.675042]@0 fusb301 7-0021: fusb301_irq_thread: BC_LVL 1, 1:500ma 2:1.5A 3:3A!
1548<6>[20170121_10:07:58.722637]@3 SMBCHG: usbin_uv_handler: triggered
1549<3>[20170121_10:07:58.727359]@3 SMBCHG: usbin_uv_handler: chip->usb_present = 0 rt_sts = 0x01 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1550<3>[20170121_10:07:58.729999]@0 fusb301 7-0021: fusb301_irq_thread: type<5> int(0x02)
1551<3>[20170121_10:07:58.730028]@0 fusb301 7-0021: fusb301_irq_thread: Detach interrupt!
1552<6>[20170121_10:07:59.119418]@3 SMBCHG: usbin_uv_handler: triggered
1553<3>[20170121_10:07:59.124202]@3 SMBCHG: usbin_uv_handler: chip->usb_present = 0 rt_sts = 0x00 hvdcp_3_det_ignore_uv = 0 aicl = 1500
1554<3>[20170121_10:07:59.167716]@0 fusb301 7-0021: fusb301_irq_thread: type<0> int(0x05)
1555<3>[20170121_10:07:59.174802]@2 fusb301 7-0021: fusb301_irq_thread: Attach interrupt! TYPE is 5, Orient is 1
1556<3>[20170121_10:07:59.183647]@2 fusb301 7-0021: fusb301_irq_thread: BC_LVL 1, 1:500ma 2:1.5A 3:3A!
1557<6>[20170121_10:07:59.979557]@0 SMBCHG: src_detect_handler: chip->usb_present = 0 usb_present = 1 src_detect = 1 hvdcp_3_det_ignore_uv=0
1558<6>[20170121_10:07:59.990542]@0 SMBCHG: handle_usb_insertion: inserted type = 6 (CDP)
1559<6>[20170121_10:07:59.997740]@0 SMBCHG: smbchg_charging_en: enable=1
1560<6>[20170121_10:08:00.003709]@0 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1500, typeC_support_current_ma = 4000
1561<6>[20170121_10:08:00.014062]@0 SMBCHG: smbchg_usb_suspend: suspend=0
1562<6>[20170121_10:08:00.021054]@0 SMBCHG: smbchg_usb_update_online_work: chip->usb_online = 0, online = 1
1563<6>[20170121_10:08:00.138643]@1 msm-dwc3 6a00000.ssusb: Avail curr from USB = 1500
1564<6>[20170121_10:08:00.148359]@1 SMBCHG: set_chg_ibat_vbat_max: vote ibatmax = 1910 and set vbatmax = 4370
1565<6>[20170121_10:08:00.157128]@1 SMBCHG: qpnp_battery_temp_region_set: set temp_region = 5
1566<6>[20170121_10:08:00.164194]@1 SMBCHG: smbchg_external_power_changed: change usb_target_current_ma = 1500
1567<3>[20170121_10:08:00.188999]@1 msm-usb-ssphy-qmp 7410000.ssphy: QMP PHY initialization timeout
1568<3>[20170121_10:08:00.196142]@1 msm-usb-ssphy-qmp 7410000.ssphy: USB3_PHY_PCS_STATUS:69696969
1569<6>[20170121_10:08:00.204403]@1 msm-dwc3 6a00000.ssusb: DWC3 exited from low power mode
1570<6>[20170121_10:08:00.258024]@1 active wakeup source: chg_wake_lock
1571<6>[20170121_10:08:00.262735]@1 active wakeup source: 6a00000.ssusb
1572<6>[20170121_10:08:01.126230]@1 SMBCHG: update_heartbeat: inserted charger type = 6 (CDP), charger_type = 6
1573<6>[20170121_10:08:01.148490]@1 SMBCHG: update_heartbeat: charger_type:6,bat_voltage:3832,charger_voltage:4569,current:92,temp:357,capacity:36
1574<6>[20170121_10:08:01.617089]@0 SMBCHG: notify_usb_enumeration_function: status=1
1575<6>[20170121_10:08:01.625585]@0 android_work: android_work: sent uevent USB_STATE=CONNECTED
1576<6>[20170121_10:08:01.667997]@0 android_usb gadget: high-speed config #1: 66bf0c8.android_usb
1577<6>[20170121_10:08:01.675294]@0 usb_gadget_vbus_draw USB setting current is 500mA
1578<6>[20170121_10:08:01.738309]@0 android_work: android_work: sent uevent USB_STATE=CONFIGURED
1579<6>[20170121_10:08:15.058241]@0 get_param_by_index_and_offset[75] sid_index = 7 offset = 24 buf = ffffffc0b5f67d00 length = 4
1580<6>[20170121_10:08:15.068207]@0 SMBCHG: charger_type_record: charger_type_record: charger_type_record: param_value = 20170121_10:08:15|4,dash_present=0
1581<6>[20170121_10:08:15.081310]@0 set_param_by_index_and_offset[99]sid_index = 7 offset = 848 buf = ffffffc0b5f67d60 length = 4
1582<6>[20170121_10:08:15.098124]@0 set_param_by_index_and_offset[99]sid_index = 7 offset = 852 buf = ffffffc0b5f67d64 length = 4
1583<6>[20170121_10:08:15.108479]@0 set_param_by_index_and_offset[99]sid_index = 7 offset = 856 buf = ffffffc0b5f67d68 length = 4
1584<6>[20170121_10:08:15.119200]@0 set_param_by_index_and_offset[99]sid_index = 7 offset = 860 buf = ffffffc0b5f67d6c length = 4
1585<6>[20170121_10:08:15.129928]@0 set_param_by_index_and_offset[99]sid_index = 7 offset = 864 buf = ffffffc0b5f67d70 length = 4
1586<6>[20170121_10:08:15.140703]@0 set_param_by_index_and_offset[99]sid_index = 7 offset = 24 buf = ffffffc0b5f67d00 length = 4
1587<3>[20170121_10:08:20.656795]@0 BQ: bq27541_battery_soc: bq27541_battery_soc = 37
1588<6>[20170121_10:08:20.676249]@0 BQ: fg_soc_calibrate: soc:37, soc_calib:37, VOLT:3907, current:-1350
1589<6>[20170121_10:08:25.011514]@0 android_usb gadget: high-speed config #0: unconfigured
1590<6>[20170121_10:08:25.017947]@0 usb_gadget_vbus_draw USB setting current is 100mA
1591<6>[20170121_10:08:25.025229]@0 mtp_release
1592<6>[20170121_10:08:25.028825]@0 mtp_open
1593<3>[20170121_10:08:25.031930]@0 dwc3_gadget_suspend_interrupt(): state:6. Ignore SUSPEND.
1594<6>[20170121_10:08:27.545880]@0 android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1595<6>[20170121_10:08:27.659343]@0 android_work: android_work: sent uevent USB_STATE=CONNECTED
1596<6>[20170121_10:08:27.666548]@0 android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1597<6>[20170121_10:08:27.772075]@0 SMBCHG: notify_usb_enumeration_function: status=1
1598<6>[20170121_10:08:27.792099]@0 android_work: android_work: sent uevent USB_STATE=CONNECTED
1599<6>[20170121_10:08:27.800431]@0 android_usb gadget: high-speed config #1: 66bf0c8.android_usb
1600<6>[20170121_10:08:27.807483]@0 usb_gadget_vbus_draw USB setting current is 500mA
1601<6>[20170121_10:08:27.868049]@0 android_work: android_work: sent uevent USB_STATE=CONFIGURED
1602<4>[20170121_10:08:29.141646]@2 --------backlight level = 0---------
1603<4>[20170121_10:08:29.148660]@2 blank off start
1604<3>[20170121_10:08:29.148671]@2 fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen off
1605<3>[20170121_10:08:29.148686]@2 synaptics,s3320: fb_notifier_callback blank[4],event[0x10]
1606<3>[20170121_10:08:29.148689]@2 synaptics,s3320: fb_notifier_callback : going TP suspend start
1607<3>[20170121_10:08:29.148694]@2 synaptics,s3320: synaptics_ts_suspend enter
1608<3>[20170121_10:08:29.148700]@2 synaptics,s3320: synaptics_ts_suspend normal end
1609<3>[20170121_10:08:29.148703]@2 synaptics,s3320: fb_notifier_callback : going TP suspend end
1610<4>[20170121_10:08:29.378369]@0 mdss_dsi_off start
1611<4>[20170121_10:08:29.405527]@0 mdss_dsi_off end
1612<6>[20170121_10:08:29.408312]@1 BQ: bq27541_set_lcd_off_status: off=1
1613<6>[20170121_10:08:29.410075]@1 BQ: bq27541_set_lcd_off_status: lcd_off_delt_soc:0,soc=37,soc_pre=37
1614<3>[20170121_10:08:29.410704]@1 synaptics,s3320: fb_notifier_callback blank[4],event[0x9]
1615<4>[20170121_10:08:29.410727]@1 blank off end
1616<6>[20170121_10:09:00.418196]@0 active wakeup source: chg_wake_lock
1617<6>[20170121_10:09:00.423076]@0 active wakeup source: 6a00000.ssusb
1618<3>[20170121_10:09:43.120485]@1 BQ: bq27541_battery_soc: bq27541_battery_soc = 38
1619<6>[20170121_10:09:43.134798]@1 BQ: fg_soc_calibrate: soc:38, soc_calib:38, VOLT:3917, current:-1415