· 4 years ago · Sep 01, 2021, 04:56 PM
1
2U-Boot 2021.01 (Jun 01 2021 - 11:54:06 +0000)
3
4CPU: Zynq 7z020
5Silicon: v0.0
6Model: Zynq Zed Development Board
7DRAM: ECC disabled 512 MiB
8Flash: 0 Bytes
9NAND: 0 MiB
10MMC: mmc@e0100000: 0
11Loading Environment from FAT... *** Warning - bad CRC, using default environment
12
13In: serial@e0001000
14Out: serial@e0001000
15Err: serial@e0001000
16Net:
17ZYNQ GEM: e000b000, mdio bus e000b000, phyaddr 0, interface rgmii-id
18eth0: ethernet@e000b000
19Hit any key to stop autoboot: 0
20switch to partitions #0, OK
21mmc0 is current device
22Scanning mmc 0:1...
23Found U-Boot script /boot.scr
242595 bytes read in 13 ms (194.3 KiB/s)
25## Executing script at 03000000
26Trying to load boot images from mmc0
274611728 bytes read in 275 ms (16 MiB/s)
28## Loading kernel from FIT Image at 10000000 ...
29 Using 'conf-system-top.dtb' configuration
30 Verifying Hash Integrity ... OK
31 Trying 'kernel-1' kernel subimage
32 Description: Linux kernel
33 Type: Kernel Image
34 Compression: uncompressed
35 Data Start: 0x100000f8
36 Data Size: 4589000 Bytes = 4.4 MiB
37 Architecture: ARM
38 OS: Linux
39 Load Address: 0x00200000
40 Entry Point: 0x00200000
41 Hash algo: sha256
42 Hash value: 219a17c8486701a0713405c927be2ecc9aa60c29effb1d4a82b879d187cc16e4
43 Verifying Hash Integrity ... sha256+ OK
44## Loading fdt from FIT Image at 10000000 ...
45 Using 'conf-system-top.dtb' configuration
46 Verifying Hash Integrity ... OK
47 Trying 'fdt-system-top.dtb' fdt subimage
48 Description: Flattened Device Tree blob
49 Type: Flat Device Tree
50 Compression: uncompressed
51 Data Start: 0x104607cc
52 Data Size: 20830 Bytes = 20.3 KiB
53 Architecture: ARM
54 Hash algo: sha256
55 Hash value: 46405c85c66bf7ceed5df5656302cc68eb166f1f5dec697d6d16ce30f31dd46d
56 Verifying Hash Integrity ... sha256+ OK
57 Booting using the fdt blob at 0x104607cc
58 Loading Kernel Image
59 Loading Device Tree to 1eade000, end 1eae615d ... OK
60
61Starting kernel ...
62
63Booting Linux on physical CPU 0x0
64Linux version 5.10.0-xilinx-v2021.1 (oe-user@oe-host) (arm-xilinx-linux-gnueabi-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.1) #1 SMP PREEMPT Fri Jun 4 15:57:16 UTC 2021
65CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
66CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
67OF: fdt: Machine model: Zynq Zed Development Board
68earlycon: cdns0 at MMIO 0xe0001000 (options '115200n8')
69printk: bootconsole [cdns0] enabled
70Memory policy: Data cache writealloc
71cma: Reserved 16 MiB at 0x1f000000
72Zone ranges:
73 Normal [mem 0x0000000000000000-0x000000001fffffff]
74 HighMem empty
75Movable zone start for each node
76Early memory node ranges
77 node 0: [mem 0x0000000000000000-0x000000001fffffff]
78Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
79percpu: Embedded 15 pages/cpu s32332 r8192 d20916 u61440
80Built 1 zonelists, mobility grouping on. Total pages: 129920
81Kernel command line: console=ttyPS0,115200 earlycon root=/dev/mmcblk0p2 rw rootwait
82Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
83Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
84mem auto-init: stack:off, heap alloc:off, heap free:off
85Memory: 490460K/524288K available (7168K kernel code, 269K rwdata, 1868K rodata, 1024K init, 161K bss, 17444K reserved, 16384K cma-reserved, 0K highmem)
86rcu: Preemptible hierarchical RCU implementation.
87rcu: RCU event tracing is enabled.
88rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
89 Trampoline variant of Tasks RCU enabled.
90rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
91rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
92NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
93efuse mapped to (ptrval)
94slcr mapped to (ptrval)
95GIC physical location is 0xf8f01000
96irq-xilinx: /amba_pl/interrupt-controller@41800000: num_irq=32, sw_irq=0, edge=0x1
97L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
98L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
99L2C-310 erratum 769419 enabled
100L2C-310 enabling early BRESP for Cortex-A9
101L2C-310 full line of zeros enabled for Cortex-A9
102L2C-310 ID prefetch enabled, offset 1 lines
103L2C-310 dynamic clock gating enabled, standby mode enabled
104L2C-310 cache controller enabled, 8 ways, 512 kB
105L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
106random: get_random_bytes called from start_kernel+0x2c0/0x4a0 with crng_init=0
107zynq_clock_init: clkc starts at (ptrval)
108Zynq clock init
109sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
110clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
111Switching to timer-based delay loop, resolution 3ns
112Console: colour dummy device 80x30
113Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
114pid_max: default: 32768 minimum: 301
115Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
116Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
117CPU: Testing write buffer coherency: ok
118CPU0: Spectre v2: using BPIALL workaround
119CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
120Setting up static identity map for 0x100000 - 0x100060
121rcu: Hierarchical SRCU implementation.
122smp: Bringing up secondary CPUs ...
123CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
124CPU1: Spectre v2: using BPIALL workaround
125smp: Brought up 1 node, 2 CPUs
126SMP: Total of 2 processors activated (1333.33 BogoMIPS).
127CPU: All CPU(s) started in SVC mode.
128devtmpfs: initialized
129VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
130clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
131futex hash table entries: 512 (order: 3, 32768 bytes, linear)
132pinctrl core: initialized pinctrl subsystem
133NET: Registered protocol family 16
134DMA: preallocated 256 KiB pool for atomic coherent allocations
135thermal_sys: Registered thermal governor 'step_wise'
136cpuidle: using governor menu
137hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
138hw-breakpoint: maximum watchpoint size is 4 bytes.
139zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0x(ptrval)
140e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 33, base_baud = 3125000) is a xuartps
141printk: console [ttyPS0] enabled
142printk: console [ttyPS0] enabled
143printk: bootconsole [cdns0] disabled
144printk: bootconsole [cdns0] disabled
145vgaarb: loaded
146SCSI subsystem initialized
147usbcore: registered new interface driver usbfs
148usbcore: registered new interface driver hub
149usbcore: registered new device driver usb
150mc: Linux media interface: v0.10
151videodev: Linux video capture interface: v2.00
152pps_core: LinuxPPS API ver. 1 registered
153pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
154PTP clock support registered
155EDAC MC: Ver: 3.0.0
156FPGA manager framework
157Advanced Linux Sound Architecture Driver Initialized.
158clocksource: Switched to clocksource arm_global_timer
159NET: Registered protocol family 2
160tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
161TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
162TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
163TCP: Hash tables configured (established 4096 bind 4096)
164UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
165UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
166NET: Registered protocol family 1
167RPC: Registered named UNIX socket transport module.
168RPC: Registered udp transport module.
169RPC: Registered tcp transport module.
170RPC: Registered tcp NFSv4.1 backchannel transport module.
171PCI: CLS 0 bytes, default 64
172hw perfevents: no interrupt-affinity property for /pmu@f8891000, guessing.
173hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
174workingset: timestamp_bits=14 max_order=17 bucket_order=3
175jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
176io scheduler mq-deadline registered
177io scheduler kyber registered
178zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
179dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
180dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
181brd: module loaded
182loop: module loaded
183spi-nor spi0.0: found s25fl256s1, expected n25q128a11
184spi-nor spi0.0: s25fl256s1 (32768 Kbytes)
1859 fixed-partitions partitions found on MTD device spi0.0
186Creating 9 MTD partitions on "spi0.0":
1870x000000000000-0x000000100000 : "qspi-fsbl-uboot"
1880x000000100000-0x000000600000 : "qspi-linux"
1890x000000600000-0x000000620000 : "qspi-device-tree"
1900x000000620000-0x000000c00000 : "qspi-rootfs"
1910x000000c00000-0x000001000000 : "qspi-bitstream"
1920x000000000000-0x000000500000 : "boot"
1930x000000500000-0x000000520000 : "bootenv"
1940x000000520000-0x000000fa0000 : "kernel"
1950x000000fa0000-0x000002000000 : "spare"
196libphy: Fixed MDIO Bus: probed
197CAN device driver interface
198libphy: MACB_mii_bus: probed
199macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 35 (00:0a:35:00:1e:53)
200e1000e: Intel(R) PRO/1000 Network Driver
201e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
202ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
203ehci-pci: EHCI PCI platform driver
204usbcore: registered new interface driver usb-storage
205ULPI transceiver vendor/product ID 0x0451/0x1507
206Found TI TUSB1210 ULPI transceiver.
207ULPI integrity check: passed.
208ci_hdrc ci_hdrc.0: EHCI Host Controller
209ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
210ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
211hub 1-0:1.0: USB hub found
212hub 1-0:1.0: 1 port detected
213i2c /dev entries driver
214cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer with timeout 10s
215EDAC MC: ECC not enabled
216Xilinx Zynq CpuIdle Driver started
217sdhci: Secure Digital Host Controller Interface driver
218sdhci: Copyright(c) Pierre Ossman
219sdhci-pltfm: SDHCI platform and OF driver helper
220ledtrig-cpu: registered to indicate activity on CPUs
221mmc0: Invalid maximum block size, assuming 512 bytes
222clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
223timer #0 at (ptrval), irq=48
224usbcore: registered new interface driver usbhid
225usbhid: USB HID core driver
226fpga_manager fpga0: Xilinx Zynq FPGA Manager registered
227NET: Registered protocol family 10
228mmc0: SDHCI controller on e0100000.mmc [e0100000.mmc] using ADMA
229Segment Routing with IPv6
230sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
231NET: Registered protocol family 17
232can: controller area network core
233NET: Registered protocol family 29
234can: raw protocol
235can: broadcast manager protocol
236can: netlink gateway - max_hops=1
237Registering SWP/SWPB emulation handler
238of-fpga-region fpga-full: FPGA Region probed
239mmc0: new high speed SDHC card at address 59b4
240of_cfs_init
241mmcblk0: mmc0:59b4 SD 14.7 GiB (ro)
242of_cfs_init: OK
243ALSA device list:
244 mmcblk0: p1 p2
245 No soundcards found.
246VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2): error -30
247Please append a correct "root=" boot option; here are the available partitions:
2480100 16384 ram0
249 (driver?)
2500101 16384 ram1
251 (driver?)
2520102 16384 ram2
253 (driver?)
2540103 16384 ram3
255 (driver?)
2560104 16384 ram4
257 (driver?)
2580105 16384 ram5
259 (driver?)
2600106 16384 ram6
261 (driver?)
2620107 16384 ram7
263 (driver?)
2640108 16384 ram8
265 (driver?)
2660109 16384 ram9
267 (driver?)
268010a 16384 ram10
269 (driver?)
270010b 16384 ram11
271 (driver?)
272010c 16384 ram12
273 (driver?)
274010d 16384 ram13
275 (driver?)
276010e 16384 ram14
277 (driver?)
278010f 16384 ram15
279 (driver?)
2801f00 1024 mtdblock0
281 (driver?)
2821f01 5120 mtdblock1
283 (driver?)
2841f02 128 mtdblock2
285 (driver?)
2861f03 6016 mtdblock3
287 (driver?)
2881f04 4096 mtdblock4
289 (driver?)
2901f05 5120 mtdblock5
291 (driver?)
2921f06 128 mtdblock6
293 (driver?)
2941f07 10752 mtdblock7
295 (driver?)
2961f08 16768 mtdblock8
297 (driver?)
298b300 15440896 mmcblk0
299 driver: mmcblk
300 b301 8388608 mmcblk0p1 49de8cb8-01
301
302 b302 7051264 mmcblk0p2 49de8cb8-02
303
304Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)
305CPU0: stopping
306CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-xilinx-v2021.1 #1
307Hardware name: Xilinx Zynq Platform
308[<c010cbc0>] (unwind_backtrace) from [<c0108cc0>] (show_stack+0x10/0x14)
309[<c0108cc0>] (show_stack) from [<c0712574>] (dump_stack+0xb4/0xd0)
310[<c0712574>] (dump_stack) from [<c010b0c4>] (do_handle_IPI+0x80/0x140)
311[<c010b0c4>] (do_handle_IPI) from [<c010b198>] (ipi_handler+0x14/0x20)
312[<c010b198>] (ipi_handler) from [<c015d658>] (handle_percpu_devid_irq+0x4c/0xf4)
313[<c015d658>] (handle_percpu_devid_irq) from [<c01588fc>] (generic_handle_irq+0x28/0x38)
314[<c01588fc>] (generic_handle_irq) from [<c0158ea8>] (__handle_domain_irq+0x90/0xa0)
315[<c0158ea8>] (__handle_domain_irq) from [<c037d9a8>] (gic_handle_irq+0x6c/0x7c)
316[<c037d9a8>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0xa8)
317Exception stack(0xc0c01ee0 to 0xc0c01f28)
3181ee0: 00000000 00000000 1e00c000 deb4d2c0 deb4c638 3401f5b3 00000000 00000000
3191f00: c0c3a700 00000000 33d08b0d 00000000 00000015 c0c01f30 c058776c c0587790
3201f20: 60000013 ffffffff
321[<c0100b0c>] (__irq_svc) from [<c0587790>] (cpuidle_enter_state+0x110/0x284)
322[<c0587790>] (cpuidle_enter_state) from [<c0587940>] (cpuidle_enter+0x28/0x38)
323[<c0587940>] (cpuidle_enter) from [<c013f530>] (do_idle+0x240/0x264)
324[<c013f530>] (do_idle) from [<c013f6bc>] (cpu_startup_entry+0x18/0x1c)
325[<c013f6bc>] (cpu_startup_entry) from [<c0b00d04>] (start_kernel+0x3f8/0x4a0)
326[<c0b00d04>] (start_kernel) from [<00000000>] (0x0)
327---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2) ]---