· 6 years ago · Mar 29, 2020, 07:26 AM
1[ 0.000000] Linux version 5.3.0-42-generic (buildd@lcy01-amd64-009) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #34~18.04.1-Ubuntu SMP Fri Feb 28 13:42:04 UTC 2020 (Ubuntu 5.3.0-42.34~18.04.1-generic 5.3.18)
2[ 0.000000] KERNEL supported cpus:
3[ 0.000000] Intel GenuineIntel
4[ 0.000000] AMD AuthenticAMD
5[ 0.000000] Hygon HygonGenuine
6[ 0.000000] NSC Geode by NSC
7[ 0.000000] Cyrix CyrixInstead
8[ 0.000000] Centaur CentaurHauls
9[ 0.000000] Transmeta GenuineTMx86
10[ 0.000000] Transmeta TransmetaCPU
11[ 0.000000] UMC UMC UMC UMC
12[ 0.000000] zhaoxin Shanghai
13[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
14[ 0.000000] BIOS-provided physical RAM map:
15[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
16[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
17[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
18[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf5dffff] usable
19[ 0.000000] BIOS-e820: [mem 0x00000000bf5e0000-0x00000000bf5e2fff] ACPI NVS
20[ 0.000000] BIOS-e820: [mem 0x00000000bf5e3000-0x00000000bf5effff] ACPI data
21[ 0.000000] BIOS-e820: [mem 0x00000000bf5f0000-0x00000000bf5fffff] reserved
22[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
23[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
24[ 0.000000] NX (Execute Disable) protection: active
25[ 0.000000] SMBIOS 2.4 present.
26[ 0.000000] DMI: Gigabyte Technology Co., Ltd. G31M-ES2C /G31M-S2C, BIOS F3 11/14/2008
27[ 0.000000] tsc: Fast TSC calibration using PIT
28[ 0.000000] tsc: Detected 1999.955 MHz processor
29[ 0.004253] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
30[ 0.004256] e820: remove [mem 0x000a0000-0x000fffff] usable
31[ 0.004264] last_pfn = 0xbf5e0 max_arch_pfn = 0x1000000
32[ 0.004274] MTRR default type: uncachable
33[ 0.004276] MTRR fixed ranges enabled:
34[ 0.004278] 00000-9FFFF write-back
35[ 0.004279] A0000-BFFFF uncachable
36[ 0.004281] C0000-CAFFF write-protect
37[ 0.004282] CB000-EFFFF uncachable
38[ 0.004284] F0000-FFFFF write-through
39[ 0.004285] MTRR variable ranges enabled:
40[ 0.004287] 0 base 000000000 mask F00000000 write-back
41[ 0.004289] 1 base 0C0000000 mask FC0000000 uncachable
42[ 0.004290] 2 base 0BF800000 mask FFF800000 uncachable
43[ 0.004292] 3 base 0BF700000 mask FFFF00000 uncachable
44[ 0.004294] 4 base 0BF600000 mask FFFF00000 uncachable
45[ 0.004295] 5 disabled
46[ 0.004296] 6 disabled
47[ 0.004297] 7 disabled
48[ 0.004771] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
49[ 0.004935] total RAM covered: 3062M
50[ 0.005371] Found optimal setting for mtrr clean up
51[ 0.005373] gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G
52[ 0.011605] found SMP MP-table at [mem 0x000f5200-0x000f520f]
53[ 0.025112] check: Scanning 1 areas for low memory corruption
54[ 0.025113] initial memory mapped: [mem 0x00000000-0x045fffff]
55[ 0.025200] BRK [0x0407a000, 0x0407afff] PGTABLE
56[ 0.025221] BRK [0x0407b000, 0x0407bfff] PGTABLE
57[ 0.025225] RAMDISK: [mem 0x303a9000-0x341cbfff]
58[ 0.025245] ACPI: Early table checksum verification disabled
59[ 0.025252] ACPI: RSDP 0x00000000000F6BF0 000014 (v00 GBT )
60[ 0.025257] ACPI: RSDT 0x00000000BF5E3040 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
61[ 0.025266] ACPI: FACP 0x00000000BF5E30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
62[ 0.025274] ACPI: DSDT 0x00000000BF5E3180 0040E8 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
63[ 0.025280] ACPI: FACS 0x00000000BF5E0000 000040
64[ 0.025284] ACPI: HPET 0x00000000BF5E73C0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
65[ 0.025290] ACPI: MCFG 0x00000000BF5E7440 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
66[ 0.025295] ACPI: APIC 0x00000000BF5E72C0 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
67[ 0.025300] ACPI: SSDT 0x00000000BF5E7AE0 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
68[ 0.025340] ACPI: Local APIC address 0xfee00000
69[ 0.025346] 2175MB HIGHMEM available.
70[ 0.025349] 885MB LOWMEM available.
71[ 0.025350] mapped low ram: 0 - 375fe000
72[ 0.025351] low ram: 0 - 375fe000
73[ 0.025362] BRK [0x0407c000, 0x0407cfff] PGTABLE
74[ 0.031440] Zone ranges:
75[ 0.031443] DMA [mem 0x0000000000001000-0x0000000000ffffff]
76[ 0.031445] Normal [mem 0x0000000001000000-0x00000000375fdfff]
77[ 0.031447] HighMem [mem 0x00000000375fe000-0x00000000bf5dffff]
78[ 0.031449] Movable zone start for each node
79[ 0.031449] Early memory node ranges
80[ 0.031451] node 0: [mem 0x0000000000001000-0x000000000009efff]
81[ 0.031454] node 0: [mem 0x0000000000100000-0x00000000bf5dffff]
82[ 0.031460] Zeroed struct page in unavailable ranges: 98 pages
83[ 0.031463] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bf5dffff]
84[ 0.031465] On node 0 totalpages: 783742
85[ 0.031467] DMA zone: 40 pages used for memmap
86[ 0.031468] DMA zone: 0 pages reserved
87[ 0.031470] DMA zone: 3998 pages, LIFO batch:0
88[ 0.031591] Normal zone: 2175 pages used for memmap
89[ 0.031593] Normal zone: 222718 pages, LIFO batch:63
90[ 0.038016] HighMem zone: 557026 pages, LIFO batch:63
91[ 0.054114] Using APIC driver default
92[ 0.054129] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]
93[ 0.054288] ACPI: PM-Timer IO Port: 0x408
94[ 0.054291] ACPI: Local APIC address 0xfee00000
95[ 0.054303] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
96[ 0.054305] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
97[ 0.054306] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
98[ 0.054307] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
99[ 0.054320] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
100[ 0.054323] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
101[ 0.054325] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
102[ 0.054328] ACPI: IRQ0 used by override.
103[ 0.054329] ACPI: IRQ9 used by override.
104[ 0.054332] Using ACPI (MADT) for SMP configuration information
105[ 0.054334] ACPI: HPET id: 0x8086a201 base: 0xfed00000
106[ 0.054345] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
107[ 0.054364] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
108[ 0.054366] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
109[ 0.054368] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
110[ 0.054369] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
111[ 0.054372] [mem 0xd0000000-0xfebfffff] available for PCI devices
112[ 0.054373] Booting paravirtualized kernel on bare hardware
113[ 0.054381] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
114[ 0.054389] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
115[ 0.054764] percpu: Embedded 33 pages/cpu s104460 r0 d30708 u135168
116[ 0.054775] pcpu-alloc: s104460 r0 d30708 u135168 alloc=33*4096
117[ 0.054777] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
118[ 0.054812] Built 1 zonelists, mobility grouping on. Total pages: 781527
119[ 0.054815] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-42-generic root=UUID=f0c77cbb-bf14-4011-87f6-8f60ca4fb4bb ro quiet splash vt.handoff=1
120[ 0.055186] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
121[ 0.055295] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
122[ 0.055345] microcode: microcode updated early to revision 0xa4, date = 2010-10-02
123[ 0.055347] Initializing CPU#0
124[ 0.055356] mem auto-init: stack:off, heap alloc:on, heap free:off
125[ 0.081902] Initializing HighMem for node 0 (000375fe:000bf5e0)
126[ 0.272863] Initializing Movable for node 0 (00000000:00000000)
127[ 0.279969] Memory: 2948220K/3134968K available (9793K kernel code, 933K rwdata, 3872K rodata, 1152K init, 816K bss, 186748K reserved, 0K cma-reserved, 2228104K highmem)
128[ 0.279975] virtual kernel memory layout:
129 fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
130 cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB)
131 pkmap : 0xff600000 - 0xff800000 (2048 kB)
132 vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
133 lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
134 .init : 0xc3e61000 - 0xc3f81000 (1152 kB)
135 .data : 0xc3990588 - 0xc3e4b640 (4844 kB)
136 .text : 0xc3000000 - 0xc3990588 (9793 kB)
137[ 0.279976] Checking if this processor honours the WP bit even in supervisor mode...Ok.
138[ 0.280008] random: get_random_u32 called from __kmem_cache_create+0x31/0x490 with crng_init=0
139[ 0.280304] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
140[ 0.280322] Kernel/User page tables isolation: enabled
141[ 0.280342] ftrace: allocating 41000 entries in 81 pages
142[ 0.311556] rcu: Hierarchical RCU implementation.
143[ 0.311559] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
144[ 0.311561] Tasks RCU enabled.
145[ 0.311562] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
146[ 0.311563] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
147[ 0.316721] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16
148[ 0.317063] vt handoff: transparent VT on vt#1
149[ 0.317075] Console: colour dummy device 80x25
150[ 0.317082] printk: console [tty0] enabled
151[ 0.317100] ACPI: Core revision 20190703
152[ 0.317205] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
153[ 0.317224] APIC: Switch to symmetric I/O mode setup
154[ 0.317226] Enabling APIC mode: Flat. Using 1 I/O APICs
155[ 0.317607] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
156[ 0.337223] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a80833d73, max_idle_ns: 881590736153 ns
157[ 0.337232] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.91 BogoMIPS (lpj=7999820)
158[ 0.337236] pid_max: default: 32768 minimum: 301
159[ 0.337310] LSM: Security Framework initializing
160[ 0.337330] Yama: becoming mindful.
161[ 0.337396] AppArmor: AppArmor initialized
162[ 0.337463] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
163[ 0.337469] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
164[ 0.337801] *** VALIDATE proc ***
165[ 0.337904] *** VALIDATE cgroup1 ***
166[ 0.337907] *** VALIDATE cgroup2 ***
167[ 0.338007] mce: CPU0: Thermal monitoring enabled (TM2)
168[ 0.338012] process: using mwait in idle threads
169[ 0.338022] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
170[ 0.338024] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
171[ 0.338029] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
172[ 0.338031] Spectre V2 : Mitigation: Full generic retpoline
173[ 0.338032] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
174[ 0.338033] Speculative Store Bypass: Vulnerable
175[ 0.338038] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
176[ 0.338256] Freeing SMP alternatives memory: 36K
177[ 0.449530] smpboot: CPU0: Intel(R) Celeron(R) CPU E1400 @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0xd)
178[ 0.449754] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
179[ 0.449764] core: PEBS disabled due to CPU errata
180[ 0.449767] ... version: 2
181[ 0.449768] ... bit width: 40
182[ 0.449769] ... generic registers: 2
183[ 0.449770] ... value mask: 000000ffffffffff
184[ 0.449771] ... max period: 000000007fffffff
185[ 0.449772] ... fixed-purpose events: 3
186[ 0.449773] ... event mask: 0000000700000003
187[ 0.449855] rcu: Hierarchical SRCU implementation.
188[ 0.451635] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
189[ 0.451795] smp: Bringing up secondary CPUs ...
190[ 0.452048] x86: Booting SMP configuration:
191[ 0.452050] .... node #0, CPUs: #1
192[ 0.004288] Initializing CPU#1
193[ 0.453334] smp: Brought up 1 node, 2 CPUs
194[ 0.453334] smpboot: Max logical packages: 2
195[ 0.453334] smpboot: Total of 2 processors activated (7999.82 BogoMIPS)
196[ 0.458266] allocated 3145728 bytes of page_ext
197[ 0.458431] devtmpfs: initialized
198[ 0.458431] PM: Registering ACPI NVS region [mem 0xbf5e0000-0xbf5e2fff] (12288 bytes)
199[ 0.458431] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
200[ 0.458431] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
201[ 0.458431] pinctrl core: initialized pinctrl subsystem
202[ 0.458431] PM: RTC time: 06:11:06, date: 2020-03-29
203[ 0.458431] NET: Registered protocol family 16
204[ 0.458431] audit: initializing netlink subsys (disabled)
205[ 0.458431] audit: type=2000 audit(1585462266.140:1): state=initialized audit_enabled=0 res=1
206[ 0.458431] EISA bus registered
207[ 0.458431] cpuidle: using governor ladder
208[ 0.458431] cpuidle: using governor menu
209[ 0.458431] ACPI: bus type PCI registered
210[ 0.458431] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
211[ 0.458431] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
212[ 0.458431] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
213[ 0.458431] PCI: Using MMCONFIG for extended config space
214[ 0.458431] PCI: Using configuration type 1 for base access
215[ 0.464170] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
216[ 0.469633] ACPI: Added _OSI(Module Device)
217[ 0.469635] ACPI: Added _OSI(Processor Device)
218[ 0.469636] ACPI: Added _OSI(3.0 _SCP Extensions)
219[ 0.469638] ACPI: Added _OSI(Processor Aggregator Device)
220[ 0.469640] ACPI: Added _OSI(Linux-Dell-Video)
221[ 0.469641] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
222[ 0.469643] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
223[ 0.474779] ACPI: 2 ACPI AML tables successfully acquired and loaded
224[ 0.476910] ACPI: Dynamic OEM Table Load:
225[ 0.476919] ACPI: SSDT 0x00000000F711F000 00026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
226[ 0.477394] ACPI: Dynamic OEM Table Load:
227[ 0.477401] ACPI: SSDT 0x00000000EBD7B200 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
228[ 0.478049] ACPI: Interpreter enabled
229[ 0.478099] ACPI: (supports S0 S3 S4 S5)
230[ 0.478101] ACPI: Using IOAPIC for interrupt routing
231[ 0.478152] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
232[ 0.478385] ACPI: Enabled 9 GPEs in block 00 to 1F
233[ 0.484126] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
234[ 0.484135] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
235[ 0.484490] PCI host bridge to bus 0000:00
236[ 0.484495] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
237[ 0.484497] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
238[ 0.484499] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
239[ 0.484501] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
240[ 0.484503] pci_bus 0000:00: root bus resource [mem 0xbf600000-0xfebfffff window]
241[ 0.484506] pci_bus 0000:00: root bus resource [bus 00-ff]
242[ 0.484539] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
243[ 0.484711] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
244[ 0.484725] pci 0000:00:02.0: reg 0x10: [mem 0xe3200000-0xe327ffff]
245[ 0.484732] pci 0000:00:02.0: reg 0x14: [io 0xe400-0xe407]
246[ 0.484738] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
247[ 0.484744] pci 0000:00:02.0: reg 0x1c: [mem 0xe3100000-0xe31fffff]
248[ 0.484931] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
249[ 0.484956] pci 0000:00:1b.0: reg 0x10: [mem 0xe3280000-0xe3283fff 64bit]
250[ 0.485040] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
251[ 0.485189] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
252[ 0.485439] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
253[ 0.485608] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
254[ 0.485706] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
255[ 0.485858] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
256[ 0.485906] pci 0000:00:1d.0: reg 0x20: [io 0xe000-0xe01f]
257[ 0.486064] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
258[ 0.486111] pci 0000:00:1d.1: reg 0x20: [io 0xe100-0xe11f]
259[ 0.486264] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
260[ 0.486311] pci 0000:00:1d.2: reg 0x20: [io 0xe200-0xe21f]
261[ 0.486462] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
262[ 0.486509] pci 0000:00:1d.3: reg 0x20: [io 0xe300-0xe31f]
263[ 0.486666] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
264[ 0.486688] pci 0000:00:1d.7: reg 0x10: [mem 0xe3284000-0xe32843ff]
265[ 0.486897] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
266[ 0.487095] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
267[ 0.487188] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
268[ 0.487193] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
269[ 0.487197] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
270[ 0.487200] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
271[ 0.487351] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
272[ 0.487374] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
273[ 0.487384] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
274[ 0.487394] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
275[ 0.487405] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
276[ 0.487415] pci 0000:00:1f.1: reg 0x20: [io 0xf000-0xf00f]
277[ 0.487438] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
278[ 0.487440] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
279[ 0.487442] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
280[ 0.487443] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
281[ 0.489393] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
282[ 0.489413] pci 0000:00:1f.2: reg 0x10: [io 0xe900-0xe907]
283[ 0.489422] pci 0000:00:1f.2: reg 0x14: [io 0xea00-0xea03]
284[ 0.489430] pci 0000:00:1f.2: reg 0x18: [io 0xeb00-0xeb07]
285[ 0.489438] pci 0000:00:1f.2: reg 0x1c: [io 0xec00-0xec03]
286[ 0.489446] pci 0000:00:1f.2: reg 0x20: [io 0xed00-0xed0f]
287[ 0.489490] pci 0000:00:1f.2: PME# supported from D3hot
288[ 0.489626] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
289[ 0.489685] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
290[ 0.489897] pci 0000:00:1c.0: PCI bridge to [bus 01]
291[ 0.489902] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
292[ 0.489977] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
293[ 0.490011] pci 0000:02:00.0: reg 0x10: [io 0xc000-0xc0ff]
294[ 0.490041] pci 0000:02:00.0: reg 0x18: [mem 0xe3010000-0xe3010fff 64bit pref]
295[ 0.490059] pci 0000:02:00.0: reg 0x20: [mem 0xe3000000-0xe300ffff 64bit pref]
296[ 0.490072] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
297[ 0.490170] pci 0000:02:00.0: supports D1 D2
298[ 0.490172] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
299[ 0.490316] pci 0000:00:1c.1: ASPM: current common clock configuration is broken, reconfiguring
300[ 0.501261] pci 0000:00:1c.1: PCI bridge to [bus 02]
301[ 0.501268] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
302[ 0.501274] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff]
303[ 0.501283] pci 0000:00:1c.1: bridge window [mem 0xe3000000-0xe30fffff 64bit pref]
304[ 0.501326] pci_bus 0000:03: extended config space not accessible
305[ 0.501396] pci 0000:03:00.0: [10ec:8139] type 00 class 0x020000
306[ 0.501416] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
307[ 0.501426] pci 0000:03:00.0: reg 0x14: [mem 0xe2000000-0xe20000ff]
308[ 0.501470] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
309[ 0.501511] pci 0000:03:00.0: supports D1 D2
310[ 0.501513] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
311[ 0.501624] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
312[ 0.501629] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
313[ 0.501632] pci 0000:00:1e.0: bridge window [mem 0xe1000000-0xe2ffffff]
314[ 0.501639] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
315[ 0.501641] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
316[ 0.501643] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
317[ 0.501645] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
318[ 0.501647] pci 0000:00:1e.0: bridge window [mem 0xbf600000-0xfebfffff window] (subtractive decode)
319[ 0.501666] pci_bus 0000:00: on NUMA node 0
320[ 0.502512] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
321[ 0.502599] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
322[ 0.502683] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
323[ 0.502766] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
324[ 0.502850] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
325[ 0.502934] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
326[ 0.503018] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
327[ 0.503018] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
328[ 0.503018] SCSI subsystem initialized
329[ 0.503018] libata version 3.00 loaded.
330[ 0.503018] pci 0000:00:02.0: vgaarb: setting as boot VGA device
331[ 0.503018] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
332[ 0.503018] pci 0000:00:02.0: vgaarb: bridge control possible
333[ 0.503018] vgaarb: loaded
334[ 0.503018] ACPI: bus type USB registered
335[ 0.503018] usbcore: registered new interface driver usbfs
336[ 0.503018] usbcore: registered new interface driver hub
337[ 0.503018] usbcore: registered new device driver usb
338[ 0.503018] pps_core: LinuxPPS API ver. 1 registered
339[ 0.503018] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
340[ 0.503018] PTP clock support registered
341[ 0.503018] EDAC MC: Ver: 3.0.0
342[ 0.503018] PCI: Using ACPI for IRQ routing
343[ 0.509277] PCI: pci_cache_line_size set to 64 bytes
344[ 0.509333] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
345[ 0.509336] e820: reserve RAM buffer [mem 0xbf5e0000-0xbfffffff]
346[ 0.509557] NetLabel: Initializing
347[ 0.509559] NetLabel: domain hash size = 128
348[ 0.509560] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
349[ 0.509584] NetLabel: unlabeled traffic allowed by default
350[ 0.510457] hpet: 3 channels of 0 reserved for per-cpu timers
351[ 0.510463] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
352[ 0.510468] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
353[ 0.513237] clocksource: Switched to clocksource tsc-early
354[ 0.541649] VFS: Disk quotas dquot_6.6.0
355[ 0.541684] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
356[ 0.541729] *** VALIDATE hugetlbfs ***
357[ 0.541914] AppArmor: AppArmor Filesystem Enabled
358[ 0.541969] pnp: PnP ACPI init
359[ 0.542238] system 00:00: [io 0x04d0-0x04d1] has been reserved
360[ 0.542241] system 00:00: [io 0x0290-0x029f] has been reserved
361[ 0.542244] system 00:00: [io 0x0800-0x087f] has been reserved
362[ 0.542246] system 00:00: [io 0x0290-0x0294] has been reserved
363[ 0.542249] system 00:00: [io 0x0880-0x088f] has been reserved
364[ 0.542258] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
365[ 0.542398] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
366[ 0.542571] pnp 00:02: [dma 2]
367[ 0.542626] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
368[ 0.542913] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
369[ 0.543225] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
370[ 0.543395] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
371[ 0.543465] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
372[ 0.543586] system 00:07: [io 0x0400-0x04cf] could not be reserved
373[ 0.543595] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
374[ 0.543931] system 00:08: [mem 0xc0000000-0xcfffffff] has been reserved
375[ 0.543939] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
376[ 0.544223] system 00:09: [mem 0x000cb400-0x000cbfff] has been reserved
377[ 0.544226] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
378[ 0.544229] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
379[ 0.544231] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
380[ 0.544234] system 00:09: [mem 0xbf5e0000-0xbf5fffff] could not be reserved
381[ 0.544236] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
382[ 0.544239] system 00:09: [mem 0x00100000-0xbf5dffff] could not be reserved
383[ 0.544242] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
384[ 0.544244] system 00:09: [mem 0xfed13000-0xfed1dfff] has been reserved
385[ 0.544247] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
386[ 0.544249] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
387[ 0.544252] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
388[ 0.544254] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
389[ 0.544257] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
390[ 0.544265] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
391[ 0.544275] pnp: PnP ACPI: found 10 devices
392[ 0.544281] PnPBIOS: Disabled
393[ 0.547599] thermal_sys: Registered thermal governor 'fair_share'
394[ 0.547602] thermal_sys: Registered thermal governor 'bang_bang'
395[ 0.547604] thermal_sys: Registered thermal governor 'step_wise'
396[ 0.547605] thermal_sys: Registered thermal governor 'user_space'
397[ 0.547606] thermal_sys: Registered thermal governor 'power_allocator'
398[ 0.582130] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
399[ 0.582205] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
400[ 0.582209] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
401[ 0.582224] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbf600000-0xbf7fffff]
402[ 0.582230] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe3300000-0xe34fffff 64bit pref]
403[ 0.582234] pci 0000:00:1c.0: PCI bridge to [bus 01]
404[ 0.582238] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
405[ 0.582244] pci 0000:00:1c.0: bridge window [mem 0xbf600000-0xbf7fffff]
406[ 0.582248] pci 0000:00:1c.0: bridge window [mem 0xe3300000-0xe34fffff 64bit pref]
407[ 0.582256] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
408[ 0.582258] pci 0000:00:1c.1: PCI bridge to [bus 02]
409[ 0.582261] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
410[ 0.582266] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff]
411[ 0.582269] pci 0000:00:1c.1: bridge window [mem 0xe3000000-0xe30fffff 64bit pref]
412[ 0.582277] pci 0000:03:00.0: BAR 6: assigned [mem 0xe1000000-0xe101ffff pref]
413[ 0.582280] pci 0000:00:1e.0: PCI bridge to [bus 03]
414[ 0.582283] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
415[ 0.582287] pci 0000:00:1e.0: bridge window [mem 0xe1000000-0xe2ffffff]
416[ 0.582296] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
417[ 0.582298] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
418[ 0.582300] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
419[ 0.582302] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
420[ 0.582304] pci_bus 0000:00: resource 8 [mem 0xbf600000-0xfebfffff window]
421[ 0.582306] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
422[ 0.582308] pci_bus 0000:01: resource 1 [mem 0xbf600000-0xbf7fffff]
423[ 0.582310] pci_bus 0000:01: resource 2 [mem 0xe3300000-0xe34fffff 64bit pref]
424[ 0.582313] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
425[ 0.582314] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe0ffffff]
426[ 0.582317] pci_bus 0000:02: resource 2 [mem 0xe3000000-0xe30fffff 64bit pref]
427[ 0.582319] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
428[ 0.582321] pci_bus 0000:03: resource 1 [mem 0xe1000000-0xe2ffffff]
429[ 0.582323] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
430[ 0.582325] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
431[ 0.582327] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
432[ 0.582329] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
433[ 0.582331] pci_bus 0000:03: resource 8 [mem 0xbf600000-0xfebfffff window]
434[ 0.582467] NET: Registered protocol family 2
435[ 0.582808] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
436[ 0.582831] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
437[ 0.582871] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
438[ 0.582890] TCP: Hash tables configured (established 8192 bind 8192)
439[ 0.582969] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
440[ 0.582985] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
441[ 0.583070] NET: Registered protocol family 1
442[ 0.583082] NET: Registered protocol family 44
443[ 0.583104] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
444[ 0.584210] PCI: CLS 32 bytes, default 64
445[ 0.584306] Trying to unpack rootfs image as initramfs...
446[ 2.123644] Freeing initrd memory: 63628K
447[ 2.123715] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
448[ 2.123719] software IO TLB: mapped [mem 0x2c3a9000-0x303a9000] (64MB)
449[ 2.124013] check: Scanning for low memory corruption every 60 seconds
450[ 2.124819] Initialise system trusted keyrings
451[ 2.124838] Key type blacklist registered
452[ 2.124934] workingset: timestamp_bits=14 max_order=20 bucket_order=6
453[ 2.127906] zbud: loaded
454[ 2.128708] squashfs: version 4.0 (2009/01/31) Phillip Lougher
455[ 2.129110] fuse: init (API version 7.31)
456[ 2.129437] Platform Keyring initialized
457[ 2.139449] Key type asymmetric registered
458[ 2.139452] Asymmetric key parser 'x509' registered
459[ 2.139568] bounce: pool size: 64 pages
460[ 2.139608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
461[ 2.139726] io scheduler mq-deadline registered
462[ 2.140642] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
463[ 2.140783] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
464[ 2.140785] vesafb: scrolling: redraw
465[ 2.140787] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
466[ 2.140818] vesafb: framebuffer at 0xd0000000, mapped to 0x(ptrval), using 5120k, total 5120k
467[ 2.140944] fbcon: Deferring console take-over
468[ 2.140946] fb0: VESA VGA frame buffer device
469[ 2.140979] intel_idle: does not run on family 6 model 15
470[ 2.141120] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
471[ 2.141136] ACPI: Power Button [PWRB]
472[ 2.141220] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
473[ 2.141291] ACPI: Power Button [PWRF]
474[ 2.141799] isapnp: Scanning for PnP cards...
475[ 2.141963] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
476[ 2.162465] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
477[ 2.166472] Linux agpgart interface v0.103
478[ 2.194965] loop: module loaded
479[ 2.195291] ata_piix 0000:00:1f.1: version 2.13
480[ 2.196651] scsi host0: ata_piix
481[ 2.196900] scsi host1: ata_piix
482[ 2.196993] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
483[ 2.196995] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
484[ 2.197179] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
485[ 2.198585] scsi host2: ata_piix
486[ 2.198784] scsi host3: ata_piix
487[ 2.198872] ata3: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xed00 irq 19
488[ 2.198874] ata4: SATA max UDMA/133 cmd 0xeb00 ctl 0xec00 bmdma 0xed08 irq 19
489[ 2.199061] libphy: Fixed MDIO Bus: probed
490[ 2.199063] tun: Universal TUN/TAP device driver, 1.6
491[ 2.199211] PPP generic driver version 2.4.2
492[ 2.199318] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
493[ 2.199327] ehci-pci: EHCI PCI platform driver
494[ 2.199551] ehci-pci 0000:00:1d.7: EHCI Host Controller
495[ 2.199562] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
496[ 2.203472] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
497[ 2.203507] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe3284000
498[ 2.217241] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
499[ 2.217361] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
500[ 2.217363] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
501[ 2.217365] usb usb1: Product: EHCI Host Controller
502[ 2.217367] usb usb1: Manufacturer: Linux 5.3.0-42-generic ehci_hcd
503[ 2.217369] usb usb1: SerialNumber: 0000:00:1d.7
504[ 2.217585] hub 1-0:1.0: USB hub found
505[ 2.217603] hub 1-0:1.0: 8 ports detected
506[ 2.217979] ehci-platform: EHCI generic platform driver
507[ 2.218005] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
508[ 2.218014] ohci-pci: OHCI PCI platform driver
509[ 2.218037] ohci-platform: OHCI generic platform driver
510[ 2.218050] uhci_hcd: USB Universal Host Controller Interface driver
511[ 2.218236] uhci_hcd 0000:00:1d.0: UHCI Host Controller
512[ 2.218246] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
513[ 2.218255] uhci_hcd 0000:00:1d.0: detected 2 ports
514[ 2.218279] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
515[ 2.218398] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
516[ 2.218400] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
517[ 2.218403] usb usb2: Product: UHCI Host Controller
518[ 2.218405] usb usb2: Manufacturer: Linux 5.3.0-42-generic uhci_hcd
519[ 2.218406] usb usb2: SerialNumber: 0000:00:1d.0
520[ 2.218610] hub 2-0:1.0: USB hub found
521[ 2.218627] hub 2-0:1.0: 2 ports detected
522[ 2.218945] uhci_hcd 0000:00:1d.1: UHCI Host Controller
523[ 2.218960] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
524[ 2.218968] uhci_hcd 0000:00:1d.1: detected 2 ports
525[ 2.218994] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
526[ 2.219106] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
527[ 2.219108] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
528[ 2.219110] usb usb3: Product: UHCI Host Controller
529[ 2.219112] usb usb3: Manufacturer: Linux 5.3.0-42-generic uhci_hcd
530[ 2.219114] usb usb3: SerialNumber: 0000:00:1d.1
531[ 2.219336] hub 3-0:1.0: USB hub found
532[ 2.219353] hub 3-0:1.0: 2 ports detected
533[ 2.219673] uhci_hcd 0000:00:1d.2: UHCI Host Controller
534[ 2.219683] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
535[ 2.219692] uhci_hcd 0000:00:1d.2: detected 2 ports
536[ 2.219729] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
537[ 2.219838] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
538[ 2.219840] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
539[ 2.219842] usb usb4: Product: UHCI Host Controller
540[ 2.219844] usb usb4: Manufacturer: Linux 5.3.0-42-generic uhci_hcd
541[ 2.219846] usb usb4: SerialNumber: 0000:00:1d.2
542[ 2.220037] hub 4-0:1.0: USB hub found
543[ 2.220050] hub 4-0:1.0: 2 ports detected
544[ 2.220368] uhci_hcd 0000:00:1d.3: UHCI Host Controller
545[ 2.220378] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
546[ 2.220387] uhci_hcd 0000:00:1d.3: detected 2 ports
547[ 2.220421] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
548[ 2.220519] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
549[ 2.220521] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
550[ 2.220524] usb usb5: Product: UHCI Host Controller
551[ 2.220526] usb usb5: Manufacturer: Linux 5.3.0-42-generic uhci_hcd
552[ 2.220527] usb usb5: SerialNumber: 0000:00:1d.3
553[ 2.220726] hub 5-0:1.0: USB hub found
554[ 2.220740] hub 5-0:1.0: 2 ports detected
555[ 2.221029] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
556[ 2.221547] serio: i8042 KBD port at 0x60,0x64 irq 1
557[ 2.221558] serio: i8042 AUX port at 0x60,0x64 irq 12
558[ 2.221795] mousedev: PS/2 mouse device common for all mice
559[ 2.222080] rtc_cmos 00:01: RTC can wake from S4
560[ 2.222256] rtc_cmos 00:01: registered as rtc0
561[ 2.222293] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
562[ 2.222308] i2c /dev entries driver
563[ 2.222401] device-mapper: uevent: version 1.0.3
564[ 2.222533] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
565[ 2.222583] platform eisa.0: Probing EISA bus 0
566[ 2.222587] platform eisa.0: EISA: Cannot allocate resource for mainboard
567[ 2.222589] platform eisa.0: Cannot allocate resource for EISA slot 1
568[ 2.222591] platform eisa.0: Cannot allocate resource for EISA slot 2
569[ 2.222593] platform eisa.0: Cannot allocate resource for EISA slot 3
570[ 2.222594] platform eisa.0: Cannot allocate resource for EISA slot 4
571[ 2.222596] platform eisa.0: Cannot allocate resource for EISA slot 5
572[ 2.222598] platform eisa.0: Cannot allocate resource for EISA slot 6
573[ 2.222600] platform eisa.0: Cannot allocate resource for EISA slot 7
574[ 2.222602] platform eisa.0: Cannot allocate resource for EISA slot 8
575[ 2.222604] platform eisa.0: EISA: Detected 0 cards
576[ 2.222615] cpufreq_nforce2: No nForce2 chipset
577[ 2.222617] intel_pstate: CPU model not supported
578[ 2.234245] ledtrig-cpu: registered to indicate activity on CPUs
579[ 2.234751] NET: Registered protocol family 10
580[ 2.243325] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
581[ 2.248443] Segment Routing with IPv6
582[ 2.248494] NET: Registered protocol family 17
583[ 2.248580] Key type dns_resolver registered
584[ 2.321800] microcode: sig=0x6fd, pf=0x1, revision=0xa4
585[ 2.322040] microcode: Microcode Update Driver: v2.2.
586[ 2.322049] Using IPI No-Shortcut mode
587[ 2.322067] sched_clock: Marking stable (2320944063, 288487)->(2323232396, -1999846)
588[ 2.322370] registered taskstats version 1
589[ 2.322388] Loading compiled-in X.509 certificates
590[ 2.329262] Loaded X.509 cert 'Build time autogenerated kernel key: 22a31db74ee2bb6fb12ed6c160706006b80e8c9c'
591[ 2.329350] zswap: loaded using pool lzo/zbud
592[ 2.341910] Key type big_key registered
593[ 2.348140] Key type encrypted registered
594[ 2.348151] AppArmor: AppArmor sha1 policy hashing enabled
595[ 2.348165] ima: No TPM chip found, activating TPM-bypass!
596[ 2.348175] ima: Allocated hash algorithm: sha1
597[ 2.348186] No architecture policies found
598[ 2.348201] evm: Initialising EVM extended attributes:
599[ 2.348202] evm: security.selinux
600[ 2.348203] evm: security.SMACK64
601[ 2.348203] evm: security.SMACK64EXEC
602[ 2.348204] evm: security.SMACK64TRANSMUTE
603[ 2.348205] evm: security.SMACK64MMAP
604[ 2.348206] evm: security.apparmor
605[ 2.348206] evm: security.ima
606[ 2.348207] evm: security.capability
607[ 2.348208] evm: HMAC attrs: 0x1
608[ 2.348610] PM: Magic number: 12:411:166
609[ 2.348772] rtc_cmos 00:01: setting system clock to 2020-03-29T06:11:08 UTC (1585462268)
610[ 2.392680] ata1.00: HPA detected: current 321670847, native 321672960
611[ 2.392684] ata1.00: ATA-7: Hitachi HDS721616PLAT80, P22OA84A, max UDMA/133
612[ 2.392686] ata1.00: 321670847 sectors, multi 16: LBA48
613[ 2.392693] ata1.01: ATAPI: _NEC DVD_RW ND-3540A, 1.01, max UDMA/33
614[ 2.392697] ata1.00: limited to UDMA/33 due to 40-wire cable
615[ 2.451583] isapnp: No Plug & Play device found
616[ 2.451790] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72161 A84A PQ: 0 ANSI: 5
617[ 2.452128] sd 0:0:0:0: Attached scsi generic sg0 type 0
618[ 2.452168] sd 0:0:0:0: [sda] 321670847 512-byte logical blocks: (165 GB/153 GiB)
619[ 2.452197] sd 0:0:0:0: [sda] Write Protect is off
620[ 2.452200] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
621[ 2.452238] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
622[ 2.453466] scsi 0:0:1:0: CD-ROM _NEC DVD_RW ND-3540A 1.01 PQ: 0 ANSI: 5
623[ 2.482523] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
624[ 2.482527] cdrom: Uniform CD-ROM driver Revision: 3.20
625[ 2.482967] sr 0:0:1:0: Attached scsi CD-ROM sr0
626[ 2.483121] sr 0:0:1:0: Attached scsi generic sg1 type 5
627[ 2.502835] sda: sda1 < sda5 > sda2
628[ 2.503600] sd 0:0:0:0: [sda] Attached SCSI disk
629[ 2.508432] Freeing unused kernel image memory: 1152K
630[ 2.517395] Write protecting kernel text and read-only data: 13700k
631[ 2.517396] NX-protecting the kernel data: 6588k
632[ 2.517853] x86/mm: Checked W+X mappings: passed, no W+X pages found.
633[ 2.517922] x86/mm: Checking user space page tables
634[ 2.518002] x86/mm: Checked W+X mappings: passed, no W+X pages found.
635[ 2.518004] Run /init as init process
636[ 2.792458] Floppy drive(s): fd0 is 1.44M
637[ 2.813000] FDC 0 is a post-1991 82077
638[ 2.836915] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
639[ 2.836922] 8139cp 0000:03:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
640[ 2.858778] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
641[ 2.860731] 8139too: 8139too Fast Ethernet driver 0.9.28
642[ 2.862300] libphy: r8169: probed
643[ 2.865296] 8139too 0000:03:00.0 eth0: RealTek RTL8139 at 0x(ptrval), 00:e0:4c:2c:0d:e4, IRQ 20
644[ 2.865742] r8169 0000:02:00.0 eth1: RTL8102e/RTL8103e, 00:1f:d0:c7:f7:9d, XID 34a, IRQ 17
645[ 2.968309] 8139too 0000:03:00.0 enp3s0: renamed from eth0
646[ 2.992814] pci 0000:00:00.0: Intel G33 Chipset
647[ 2.992844] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
648[ 2.992981] pci 0000:00:00.0: detected 8192K stolen memory
649[ 2.993114] checking generic (d0000000 500000) vs hw (d0000000 10000000)
650[ 2.993116] fb0: switching to inteldrmfb from VESA VGA
651[ 2.993534] i915 0000:00:02.0: vgaarb: deactivate vga console
652[ 2.994320] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
653[ 2.994322] [drm] Driver supports precise vblank timestamp query.
654[ 2.996811] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
655[ 2.999015] r8169 0000:02:00.0 enp2s0: renamed from eth1
656[ 3.003639] [drm] RC6 disabled, disabling runtime PM support
657[ 3.003727] [drm] Initialized overlay support.
658[ 3.005314] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
659[ 3.040250] fbcon: i915drmfb (fb0) is primary device
660[ 3.040252] fbcon: Deferring console take-over
661[ 3.040258] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
662[ 3.133260] tsc: Refined TSC clocksource calibration: 1999.952 MHz
663[ 3.133274] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a801b5b6f, max_idle_ns: 881590638285 ns
664[ 3.133298] clocksource: Switched to clocksource tsc
665[ 3.296328] random: fast init done
666[ 3.324449] random: systemd-udevd: uninitialized urandom read (16 bytes read)
667[ 3.324472] random: systemd-udevd: uninitialized urandom read (16 bytes read)
668[ 3.324508] random: systemd-udevd: uninitialized urandom read (16 bytes read)
669[ 3.800076] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
670[ 4.269236] raid6: sse2x2 gen() 4543 MB/s
671[ 4.317240] raid6: sse2x2 xor() 4175 MB/s
672[ 4.365253] raid6: sse2x1 gen() 2969 MB/s
673[ 4.413238] raid6: sse2x1 xor() 3521 MB/s
674[ 4.461251] raid6: sse1x2 gen() 2398 MB/s
675[ 4.509248] raid6: sse1x1 gen() 1678 MB/s
676[ 4.509250] raid6: using algorithm sse2x2 gen() 4543 MB/s
677[ 4.509251] raid6: .... xor() 4175 MB/s, rmw enabled
678[ 4.509253] raid6: using ssse3x1 recovery algorithm
679[ 4.524806] xor: measuring software checksum speed
680[ 4.561234] pIII_sse : 9179.000 MB/sec
681[ 4.601233] prefetch64-sse: 10789.000 MB/sec
682[ 4.601235] xor: using function: prefetch64-sse (10789.000 MB/sec)
683[ 4.667577] Btrfs loaded, crc32c=crc32c-generic
684[ 5.277273] usb 1-3: new high-speed USB device number 2 using ehci-pci
685[ 5.306182] usb 1-3: New USB device found, idVendor=12d1, idProduct=14fe, bcdDevice= 1.02
686[ 5.306186] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
687[ 5.306190] usb 1-3: Product: HUAWEI Mobile
688[ 5.306193] usb 1-3: Manufacturer: HUAWEI
689[ 5.319845] usb-storage 1-3:1.0: USB Mass Storage device detected
690[ 5.320098] scsi host4: usb-storage 1-3:1.0
691[ 5.320321] usb-storage 1-3:1.1: USB Mass Storage device detected
692[ 5.321020] scsi host5: usb-storage 1-3:1.1
693[ 5.321271] usbcore: registered new interface driver usb-storage
694[ 5.327184] usbcore: registered new interface driver uas
695[ 6.334350] scsi 4:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
696[ 6.334485] scsi 5:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
697[ 6.336644] sd 5:0:0:0: Attached scsi generic sg2 type 0
698[ 6.339879] sd 5:0:0:0: [sdb] Attached SCSI removable disk
699[ 6.340483] sr 4:0:0:0: [sr1] scsi-1 drive
700[ 6.340981] sr 4:0:0:0: Attached scsi CD-ROM sr1
701[ 6.341340] sr 4:0:0:0: Attached scsi generic sg3 type 5
702[ 17.669856] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
703[ 17.669866] floppy: error 10 while reading block 0
704[ 17.951386] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
705[ 19.364740] random: crng init done
706[ 19.364745] random: 6 urandom warning(s) missed due to ratelimiting
707[ 19.930846] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
708[ 19.949439] systemd[1]: Detected architecture x86.
709[ 19.961977] systemd[1]: Set hostname to <ryszard-G31M-ES2C>.
710[ 23.645088] systemd[1]: Reached target User and Group Name Lookups.
711[ 23.645899] systemd[1]: Created slice System Slice.
712[ 23.646165] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
713[ 23.646408] systemd[1]: Listening on LVM2 poll daemon socket.
714[ 23.646720] systemd[1]: Listening on Journal Socket.
715[ 23.648721] systemd[1]: Starting Uncomplicated firewall...
716[ 23.680758] systemd[1]: Starting Load Kernel Modules...
717[ 23.790604] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
718[ 24.352690] lp: driver loaded but no devices found
719[ 24.420340] ppdev: user-space parallel port driver
720[ 24.525813] parport_pc 00:04: reported by Plug and Play ACPI
721[ 24.525906] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
722[ 24.621457] lp0: using parport0 (interrupt-driven).
723[ 24.687056] systemd-journald[410]: Received request to flush runtime journal from PID 1
724[ 24.733271] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
725[ 26.270199] sd 5:0:0:0: [sdb] 980480 512-byte logical blocks: (502 MB/479 MiB)
726[ 26.271456] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
727[ 26.278990] sdb:
728[ 30.287795] audit: type=1400 audit(1585462296.436:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=505 comm="apparmor_parser"
729[ 30.287804] audit: type=1400 audit(1585462296.436:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=505 comm="apparmor_parser"
730[ 30.287808] audit: type=1400 audit(1585462296.436:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=505 comm="apparmor_parser"
731[ 30.287812] audit: type=1400 audit(1585462296.436:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=505 comm="apparmor_parser"
732[ 30.611556] audit: type=1400 audit(1585462296.756:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=504 comm="apparmor_parser"
733[ 30.611565] audit: type=1400 audit(1585462296.756:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=504 comm="apparmor_parser"
734[ 30.788920] audit: type=1400 audit(1585462296.932:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=508 comm="apparmor_parser"
735[ 30.792199] audit: type=1400 audit(1585462296.936:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=507 comm="apparmor_parser"
736[ 30.792208] audit: type=1400 audit(1585462296.936:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=507 comm="apparmor_parser"
737[ 30.792213] audit: type=1400 audit(1585462296.936:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=507 comm="apparmor_parser"
738[ 34.235421] intel_rng: FWH not detected
739[ 34.350689] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20190703/utaddress-213)
740[ 34.350698] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
741[ 34.350769] lpc_ich: Resource conflict(s) found affecting gpio_ich
742[ 34.749495] leds_ss4200: no LED devices found
743[ 35.174565] gpio_ich gpio_ich.1.auto: GPIO from 462 to 511
744[ 35.261977] coretemp coretemp.0: Using relative temperature scale!
745[ 35.262322] coretemp coretemp.0: Using relative temperature scale!
746[ 35.488888] intel_powerclamp: No package C-state available
747[ 35.514086] intel_powerclamp: No package C-state available
748[ 36.533393] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC883: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
749[ 36.533397] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
750[ 36.533399] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
751[ 36.533401] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
752[ 36.533403] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
753[ 36.533404] snd_hda_codec_realtek hdaudioC0D2: inputs:
754[ 36.533407] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
755[ 36.533409] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
756[ 36.533411] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
757[ 36.533413] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
758[ 36.547627] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
759[ 36.548384] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
760[ 36.548736] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
761[ 36.549017] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
762[ 36.549933] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save blacklist, forcing power_save to 0
763[ 45.614728] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
764[ 45.658560] usb 1-3: USB disconnect, device number 2
765[ 50.353284] usb 1-3: new high-speed USB device number 3 using ehci-pci
766[ 50.382468] usb 1-3: New USB device found, idVendor=12d1, idProduct=1506, bcdDevice= 1.02
767[ 50.382474] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=0
768[ 50.382477] usb 1-3: Product: HUAWEI Mobile
769[ 50.382481] usb 1-3: Manufacturer: HUAWEI
770[ 50.385662] usb-storage 1-3:1.4: USB Mass Storage device detected
771[ 50.389293] scsi host4: usb-storage 1-3:1.4
772[ 50.389598] usb-storage 1-3:1.5: USB Mass Storage device detected
773[ 50.390046] scsi host5: usb-storage 1-3:1.5
774[ 50.744810] usbcore: registered new interface driver usbserial_generic
775[ 50.744826] usbserial: USB Serial support registered for generic
776[ 51.019693] usbcore: registered new interface driver option
777[ 51.021833] usbserial: USB Serial support registered for GSM modem (1-port)
778[ 51.023903] option 1-3:1.0: GSM modem (1-port) converter detected
779[ 51.024267] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
780[ 51.026169] option 1-3:1.2: GSM modem (1-port) converter detected
781[ 51.026594] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
782[ 51.027292] option 1-3:1.3: GSM modem (1-port) converter detected
783[ 51.027675] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2
784[ 51.161978] usbcore: registered new interface driver cdc_ncm
785[ 51.273004] usbcore: registered new interface driver cdc_wdm
786[ 51.422298] scsi 5:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
787[ 51.422466] scsi 4:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
788[ 51.424141] sr 4:0:0:0: [sr1] scsi-1 drive
789[ 51.424646] sr 4:0:0:0: Attached scsi CD-ROM sr1
790[ 51.424873] sr 4:0:0:0: Attached scsi generic sg2 type 5
791[ 51.428174] sd 5:0:0:0: Attached scsi generic sg3 type 0
792[ 51.429150] sd 5:0:0:0: [sdb] Attached SCSI removable disk
793[ 51.490090] huawei_cdc_ncm 1-3:1.1: MAC-Address: 58:2c:80:13:92:63
794[ 51.490097] huawei_cdc_ncm 1-3:1.1: setting rx_max = 16384
795[ 51.490337] huawei_cdc_ncm 1-3:1.1: setting tx_max = 16384
796[ 51.490460] huawei_cdc_ncm 1-3:1.1: NDP will be placed at end of frame for this device.
797[ 51.490658] huawei_cdc_ncm 1-3:1.1: cdc-wdm0: USB WDM device
798[ 51.491033] huawei_cdc_ncm 1-3:1.1 wwan0: register 'huawei_cdc_ncm' at usb-0000:00:1d.7-3, Huawei CDC NCM device, 58:2c:80:13:92:63
799[ 51.491104] usbcore: registered new interface driver huawei_cdc_ncm
800[ 51.637577] huawei_cdc_ncm 1-3:1.1 wwx582c80139263: renamed from wwan0
801[ 53.637739] sd 5:0:0:0: [sdb] 980480 512-byte logical blocks: (502 MB/479 MiB)
802[ 53.638984] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
803[ 53.647798] sdb:
804[ 55.097767] RTL8201CP Ethernet r8169-200:00: attached PHY driver [RTL8201CP Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
805[ 55.202319] r8169 0000:02:00.0 enp2s0: Link is Down
806[ 55.215515] 8139too 0000:03:00.0 enp3s0: link down
807[ 58.668614] fbcon: Taking over console
808[ 58.676228] Console: switching to colour frame buffer device 160x64
809[ 77.590002] ISO 9660 Extensions: Microsoft Joliet Level 3
810[ 77.605129] FAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
811[ 77.638409] ISOFS: changing to secondary root
812[ 131.049499] perf: interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
813[ 141.004490] RTL8201CP Ethernet r8169-200:00: attached PHY driver [RTL8201CP Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
814[ 141.109319] r8169 0000:02:00.0 enp2s0: Link is Down
815[ 141.113162] 8139too 0000:03:00.0 enp3s0: link down
816[ 180.848619] perf: interrupt took too long (3163 > 3135), lowering kernel.perf_event_max_sample_rate to 63000
817[ 289.989622] perf: interrupt took too long (3983 > 3953), lowering kernel.perf_event_max_sample_rate to 50000
818[ 368.489590] perf: interrupt took too long (5045 > 4978), lowering kernel.perf_event_max_sample_rate to 39500
819[ 401.068197] perf: interrupt took too long (6747 > 6306), lowering kernel.perf_event_max_sample_rate to 29500
820[ 515.873733] perf: interrupt took too long (8468 > 8433), lowering kernel.perf_event_max_sample_rate to 23500
821[ 1548.108878] perf: interrupt took too long (10729 > 10585), lowering kernel.perf_event_max_sample_rate to 18500
822[ 1935.358623] usb 1-4: new high-speed USB device number 4 using ehci-pci
823[ 1935.387686] usb 1-4: New USB device found, idVendor=152d, idProduct=2338, bcdDevice= 1.00
824[ 1935.387692] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
825[ 1935.387696] usb 1-4: Product: USB to ATA/ATAPI bridge
826[ 1935.387699] usb 1-4: Manufacturer: JMicron
827[ 1935.387702] usb 1-4: SerialNumber: 581230080282
828[ 1935.388763] usb-storage 1-4:1.0: USB Mass Storage device detected
829[ 1935.395889] scsi host6: usb-storage 1-4:1.0
830[ 1936.407482] scsi 6:0:0:0: Direct-Access SAMSUNG SP0802N PQ: 0 ANSI: 5
831[ 1936.408119] sd 6:0:0:0: Attached scsi generic sg4 type 0
832[ 1936.408885] sd 6:0:0:0: [sdc] 156368016 512-byte logical blocks: (80.1 GB/74.6 GiB)
833[ 1936.409973] sd 6:0:0:0: [sdc] Write Protect is off
834[ 1936.409979] sd 6:0:0:0: [sdc] Mode Sense: 28 00 00 00
835[ 1936.411098] sd 6:0:0:0: [sdc] No Caching mode page found
836[ 1936.411108] sd 6:0:0:0: [sdc] Assuming drive cache: write through
837[ 1936.423765] sdc: sdc1
838[ 1936.427240] sd 6:0:0:0: [sdc] Attached SCSI disk
839[ 2638.003544] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
840[ 2638.003554] floppy: error 10 while reading block 0
841[ 2650.292463] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
842[ 2650.292472] floppy: error 10 while reading block 0
843[ 3603.519192] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
844[ 3603.519202] floppy: error 10 while reading block 0
845[ 3615.802752] blk_update_request: I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
846[ 3615.802761] floppy: error 10 while reading block 0
847[ 3690.338331] usb 1-4: reset high-speed USB device number 4 using ehci-pci
848[ 3690.367035] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK
849[ 3690.367042] sd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
850[ 3690.367048] blk_update_request: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
851[ 3695.778668] usb 1-4: reset high-speed USB device number 4 using ehci-pci
852[ 3727.204486] usb 1-4: reset high-speed USB device number 4 using ehci-pci
853[ 3729.996648] usb 1-4: reset high-speed USB device number 4 using ehci-pci
854[ 3730.420668] usb 1-4: device not accepting address 4, error -71
855[ 3730.756681] usb 1-4: reset high-speed USB device number 4 using ehci-pci
856[ 3730.785420] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
857[ 3730.785428] sd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 00 18 00 00 08 00
858[ 3730.785434] blk_update_request: I/O error, dev sdc, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
859[ 3735.436971] usb 1-4: reset high-speed USB device number 4 using ehci-pci
860[ 3766.118786] usb 1-4: reset high-speed USB device number 4 using ehci-pci
861[ 3776.939417] usb 1-4: device not accepting address 4, error -110
862[ 3777.067449] usb 1-4: reset high-speed USB device number 4 using ehci-pci
863[ 3787.692061] usb 1-4: device not accepting address 4, error -110
864[ 3787.820064] usb 1-4: reset high-speed USB device number 4 using ehci-pci
865[ 3792.992376] usb 1-4: device descriptor read/64, error -110
866[ 3808.605294] usb 1-4: device descriptor read/64, error -110
867[ 3808.841323] usb 1-4: reset high-speed USB device number 4 using ehci-pci
868[ 3813.981615] usb 1-4: device descriptor read/64, error -110
869[ 3829.598556] usb 1-4: device descriptor read/64, error -110
870[ 3829.706673] usb 1-4: USB disconnect, device number 4
871[ 3829.716647] scsi 6:0:0:0: rejecting I/O to dead device
872[ 3829.716660] blk_update_request: I/O error, dev sdc, sector 24 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
873[ 3829.716667] Buffer I/O error on dev sdc, logical block 3, async page read
874[ 3829.862588] usb 1-4: new high-speed USB device number 5 using ehci-pci
875[ 3840.687486] usb 1-4: device not accepting address 5, error -110
876[ 3840.819212] usb 1-4: new high-speed USB device number 6 using ehci-pci
877[ 3843.225284] TCP: wwx582c80139263: Driver has suspect GRO implementation, TCP performance may be compromised.
878[ 3851.439849] usb 1-4: device not accepting address 6, error -110
879[ 3851.439899] usb usb1-port4: attempt power cycle
880[ 3851.883925] usb 1-4: new high-speed USB device number 7 using ehci-pci
881[ 3857.256186] usb 1-4: device descriptor read/64, error -110
882[ 3872.865170] usb 1-4: device descriptor read/64, error -110
883[ 3873.101136] usb 1-4: new high-speed USB device number 8 using ehci-pci
884[ 3878.245444] usb 1-4: device descriptor read/64, error -110
885[ 3893.858378] usb 1-4: device descriptor read/64, error -110
886[ 3893.966433] usb usb1-port4: unable to enumerate USB device
887[ 3894.252124] usb 3-2: new full-speed USB device number 2 using uhci_hcd
888[ 3894.394440] usb 3-2: device descriptor read/64, error -71
889[ 3894.646425] usb 3-2: device descriptor read/64, error -71
890[ 3894.882439] usb 3-2: new full-speed USB device number 3 using uhci_hcd
891[ 3895.022438] usb 3-2: device descriptor read/64, error -71
892[ 3895.270506] usb 3-2: device descriptor read/64, error -71
893[ 3895.378510] usb usb3-port2: attempt power cycle
894[ 3895.378527] usb usb3-port2: failed to disable port power
895[ 3895.508443] usb 3-2: new full-speed USB device number 4 using uhci_hcd
896[ 3895.927897] usb 3-2: device not accepting address 4, error -71
897[ 3896.058505] usb 3-2: new full-speed USB device number 5 using uhci_hcd
898[ 3896.474529] usb 3-2: device not accepting address 5, error -71
899[ 3896.474581] usb usb3-port2: unable to enumerate USB device