· 4 years ago · Sep 01, 2021, 07:02 PM
1WARNING: Image format was not specified for '/home/user/vitis-workspace/zedboard-hls-test/vector-addition_system/Emulation-SW/package/sd_card.img' and probing guessed raw.
2 Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
3 Specify the 'raw' format explicitly to remove the restrictions.
4
5qemu-system-aarch64: info: QEMU waiting for connection on: disconnected:tcp:127.0.0.1:8904,server
6
7qemu-system-aarch64: warning: nic ethernet@e000c000 has no peer
8
9
10
11U-Boot 2021.01 (Jun 01 2021 - 11:54:06 +0000)
12
13Model: Zynq Zed Development Board
14DRAM: ECC disabled 512 MiB
15Flash: 0 Bytes
16NAND: 0 MiB
17MMC: mmc@e0100000: 0
18Loading Environment from FAT... *** Warning - bad CRC, using default environment
19
20In: serial@e0001000
21Out: serial@e0001000
22Err: serial@e0001000
23Net:
24ZYNQ GEM: e000b000, mdio bus e000b000, phyaddr 0, interface rgmii-id
25Could not get PHY for eth0: addr 0
26No ethernet found.
27
28Hit any key to stop autoboot: 2 1 0
29switch to partitions #0, OK
30mmc0 is current device
31Scanning mmc 0:1...
32Found U-Boot script /boot.scr
332595 bytes read in 15 ms (168.9 KiB/s)
34## Executing script at 03000000
35Trying to load boot images from mmc0
364611752 bytes read in 363 ms (12.1 MiB/s)
37## Loading kernel from FIT Image at 10000000 ...
38 Using 'conf-system-top.dtb' configuration
39 Verifying Hash Integrity ... OK
40 Trying 'kernel-1' kernel subimage
41 Description: Linux kernel
42 Type: Kernel Image
43 Compression: uncompressed
44 Data Start: 0x100000f8
45 Data Size: 4589000 Bytes = 4.4 MiB
46 Architecture: ARM
47 OS: Linux
48 Load Address: 0x00200000
49 Entry Point: 0x00200000
50 Hash algo: sha256
51 Hash value: 219a17c8486701a0713405c927be2ecc9aa60c29effb1d4a82b879d187cc16e4
52 Verifying Hash Integrity ... sha256+ OK
53## Loading fdt from FIT Image at 10000000 ...
54 Using 'conf-system-top.dtb' configuration
55 Verifying Hash Integrity ... OK
56 Trying 'fdt-system-top.dtb' fdt subimage
57 Description: Flattened Device Tree blob
58 Type: Flat Device Tree
59 Compression: uncompressed
60 Data Start: 0x104607cc
61 Data Size: 20853 Bytes = 20.4 KiB
62 Architecture: ARM
63 Hash algo: sha256
64 Hash value: ba0fe45ece2e01034d10ec259baa6d26e513ca15aa3a986e294ce56752636f4b
65 Verifying Hash Integrity ... sha256+ OK
66 Booting using the fdt blob at 0x104607cc
67
68ZYNQ GEM: e000b000, mdio bus e000b000, phyaddr 0, interface rgmii-id
69Could not get PHY for eth0: addr 0
70 Loading Kernel Image
71 Loading Device Tree to 1eade000, end 1eae6174 ... OK
72
73Starting kernel ...
74
75Booting Linux on physical CPU 0x0
76Linux version 5.10.0-xilinx-v2021.1 (oe-user@oe-host) (arm-xilinx-linux-gnueabi-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.1) #1 SMP PREEMPT Fri Jun 4 15:57:16 UTC 2021
77CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c5387d
78CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
79OF: fdt: Machine model: Zynq Zed Development Board
80earlycon: cdns0 at MMIO 0xe0001000 (options '115200n8')
81printk: bootconsole [cdns0] enabled
82Memory policy: Data cache writealloc
83cma: Reserved 16 MiB at 0x1f000000
84Zone ranges:
85 Normal [mem 0x0000000000000000-0x000000001fffffff]
86 HighMem empty
87Movable zone start for each node
88Early memory node ranges
89 node 0: [mem 0x0000000000000000-0x000000001fffffff]
90Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
91percpu: Embedded 15 pages/cpu s32332 r8192 d20916 u61440
92Built 1 zonelists, mobility grouping on. Total pages: 129920
93Kernel command line: console=ttyPS0,115200 earlycon root=/dev/mmcblk0p2 rw rootwait
94Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
95Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
96mem auto-init: stack:off, heap alloc:off, heap free:off
97Memory: 490460K/524288K available (7168K kernel code, 269K rwdata, 1868K rodata, 1024K init, 161K bss, 17444K reserved, 16384K cma-reserved, 0K highmem)
98rcu: Preemptible hierarchical RCU implementation.
99rcu: RCU event tracing is enabled.
100rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
101 Trampoline variant of Tasks RCU enabled.
102rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
103rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
104NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
105efuse mapped to (ptrval)
106slcr mapped to (ptrval)
107GIC physical location is 0xf8f01000
108irq-xilinx: /amba_pl/interrupt-controller@41800000: num_irq=32, sw_irq=0, edge=0x1
109L2C: platform modifies aux control register: 0x00000000 -> 0x30400000
110L2C: DT/platform modifies aux control register: 0x00000000 -> 0x30400000
111L2C-310 errata 588369 769419 enabled
112L2C-310 full line of zeros enabled for Cortex-A9
113L2C-310 cache controller enabled, 8 ways, 64 kB
114L2C-310: CACHE_ID 0x00000000, AUX_CTRL 0x00000000
115random: get_random_bytes called from start_kernel+0x2c0/0x4a0 with crng_init=0
116zynq_clock_init: clkc starts at (ptrval)
117Zynq clock init
118global-timer: non support for this cpu version.
119Failed to initialize '/axi/timer@f8f00200': -38
120Console: colour dummy device 80x30
121sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
122Calibrating delay loop... 2662.40 BogoMIPS (lpj=13312000)
123pid_max: default: 32768 minimum: 301
124Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
125Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
126CPU: Testing write buffer coherency: ok
127CPU0: Spectre v2: using BPIALL workaround
128CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
129Setting up static identity map for 0x100000 - 0x100060
130rcu: Hierarchical SRCU implementation.
131smp: Bringing up secondary CPUs ...
132CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
133CPU1: Spectre v2: using BPIALL workaround
134smp: Brought up 1 node, 2 CPUs
135SMP: Total of 2 processors activated (5390.33 BogoMIPS).
136CPU: All CPU(s) started in SVC mode.
137devtmpfs: initialized
138VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 0
139clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
140futex hash table entries: 512 (order: 3, 32768 bytes, linear)
141pinctrl core: initialized pinctrl subsystem
142NET: Registered protocol family 16
143DMA: preallocated 256 KiB pool for atomic coherent allocations
144thermal_sys: Registered thermal governor 'step_wise'
145cpuidle: using governor menu
146OF: amba_device_add() failed (-19) for /axi/etb@f8801000
147OF: amba_device_add() failed (-19) for /axi/tpiu@f8803000
148OF: amba_device_add() failed (-19) for /axi/funnel@f8804000
149OF: amba_device_add() failed (-19) for /axi/ptm@f889c000
150OF: amba_device_add() failed (-19) for /axi/ptm@f889d000
151hw-breakpoint: debug architecture 0x4 unsupported.
152zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0x(ptrval)
153e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 32, base_baud = 992063) is a xuartps
154printk: console [ttyPS0] enabled
155printk: console [ttyPS0] enabled
156printk: bootconsole [cdns0] disabled
157printk: bootconsole [cdns0] disabled
158vgaarb: loaded
159SCSI subsystem initialized
160usbcore: registered new interface driver usbfs
161usbcore: registered new interface driver hub
162usbcore: registered new device driver usb
163mc: Linux media interface: v0.10
164videodev: Linux video capture interface: v2.00
165pps_core: LinuxPPS API ver. 1 registered
166pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
167PTP clock support registered
168EDAC MC: Ver: 3.0.0
169FPGA manager framework
170Advanced Linux Sound Architecture Driver Initialized.
171NET: Registered protocol family 2
172tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
173TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
174TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
175TCP: Hash tables configured (established 4096 bind 4096)
176UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
177UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
178NET: Registered protocol family 1
179RPC: Registered named UNIX socket transport module.
180RPC: Registered udp transport module.
181RPC: Registered tcp transport module.
182RPC: Registered tcp NFSv4.1 backchannel transport module.
183PCI: CLS 0 bytes, default 64
184hw perfevents: no interrupt-affinity property for /pmu@f8891000, guessing.
185hw perfevents: enabled with armv7_cortex_a9 PMU driver, 5 counters available
186workingset: timestamp_bits=14 max_order=17 bucket_order=3
187jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
188io scheduler mq-deadline registered
189io scheduler kyber registered
190zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
191dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
192dma-pl330 f8003000.dmac: DBUFF-256x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
193brd: module loaded
194loop: module loaded
195spi-nor spi0.0: found n25q128a13, expected n25q128a11
196spi-nor spi0.0: trying to lock already unlocked area
197spi-nor spi0.0: n25q128a13 (16384 Kbytes)
1989 fixed-partitions partitions found on MTD device spi0.0
199Creating 9 MTD partitions on "spi0.0":
2000x000000000000-0x000000100000 : "qspi-fsbl-uboot"
2010x000000100000-0x000000600000 : "qspi-linux"
2020x000000600000-0x000000620000 : "qspi-device-tree"
2030x000000620000-0x000000c00000 : "qspi-rootfs"
2040x000000c00000-0x000001000000 : "qspi-bitstream"
2050x000000000000-0x000000500000 : "boot"
2060x000000500000-0x000000520000 : "bootenv"
2070x000000520000-0x000000fa0000 : "kernel"
2080x000000fa0000-0x000001000000 : "spare"
209libphy: Fixed MDIO Bus: probed
210CAN device driver interface
211libphy: MACB_mii_bus: probed
212mdio_bus e000b000.ethernet-ffffffff: MDIO device at address 0 is missing.
213macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 34 (00:0a:35:00:1e:53)
214e1000e: Intel(R) PRO/1000 Network Driver
215e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
216ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
217ehci-pci: EHCI PCI platform driver
218usbcore: registered new interface driver usb-storage
219ULPI transceiver vendor/product ID 0x0000/0x0000
220ULPI integrity check: failed!
221ci_hdrc ci_hdrc.0: unable to init phy: -19
222i2c /dev entries driver
223cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer with timeout 10s
224EDAC MC: ECC not enabled
225Xilinx Zynq CpuIdle Driver started
226sdhci: Secure Digital Host Controller Interface driver
227sdhci: Copyright(c) Pierre Ossman
228sdhci-pltfm: SDHCI platform and OF driver helper
229ledtrig-cpu: registered to indicate activity on CPUs
230clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 826992825 ns
231clocksource: Switched to clocksource ttc_clocksource
232sched_clock: 16 bits at 35kHz, resolution 28357ns, wraps every 929205421ns
233timer #0 at (ptrval), irq=48
234usbcore: registered new interface driver usbhid
235usbhid: USB HID core driver
236fpga_manager fpga0: Xilinx Zynq FPGA Manager registered
237NET: Registered protocol family 10
238Segment Routing with IPv6
239sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
240NET: Registered protocol family 17
241can: controller area network core
242NET: Registered protocol family 29
243can: raw protocol
244can: broadcast manager protocol
245can: netlink gateway - max_hops=1
246Registering SWP/SWPB emulation handler
247of-fpga-region fpga-full: FPGA Region probed
248of_cfs_init
249of_cfs_init: OK
250ALSA device list:
251 No soundcards found.
252mmc0: SDHCI controller on e0100000.mmc [e0100000.mmc] using ADMA 64-bit
253Waiting for root device /dev/mmcblk0p2...
254mmc0: Problem switching card into high-speed mode!
255mmc0: new SD card at address 4567
256mmcblk0: mmc0:4567 QEMU! 2.00 GiB
257 mmcblk0: p1 p2
258List of all partitions:
2590100 16384 ram0
260 (driver?)
2610101 16384 ram1
262 (driver?)
2630102 16384 ram2
264 (driver?)
2650103 16384 ram3
266 (driver?)
2670104 16384 ram4
268 (driver?)
2690105 16384 ram5
270 (driver?)
2710106 16384 ram6
272 (driver?)
2730107 16384 ram7
274 (driver?)
2750108 16384 ram8
276 (driver?)
2770109 16384 ram9
278 (driver?)
279010a 16384 ram10
280 (driver?)
281010b 16384 ram11
282 (driver?)
283010c 16384 ram12
284 (driver?)
285010d 16384 ram13
286 (driver?)
287010e 16384 ram14
288 (driver?)
289010f 16384 ram15
290 (driver?)
2911f00 1024 mtdblock0
292 (driver?)
2931f01 5120 mtdblock1
294 (driver?)
2951f02 128 mtdblock2
296 (driver?)
2971f03 6016 mtdblock3
298 (driver?)
2991f04 4096 mtdblock4
300 (driver?)
3011f05 5120 mtdblock5
302 (driver?)
3031f06 128 mtdblock6
304 (driver?)
3051f07 10752 mtdblock7
306 (driver?)
3071f08 384 mtdblock8
308 (driver?)
309b300 2097152 mmcblk0
310 driver: mmcblk
311 b301 999424 mmcblk0p1 97625404-01
312
313 b302 572416 mmcblk0p2 97625404-02
314
315No filesystem could mount root, tried:
316 ext3
317 ext2
318 ext4
319 vfat
320 msdos
321
322Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)
323CPU1: stopping
324CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.10.0-xilinx-v2021.1 #1
325Hardware name: Xilinx Zynq Platform
326[<c010cbc0>] (unwind_backtrace) from [<c0108cc0>] (show_stack+0x10/0x14)
327[<c0108cc0>] (show_stack) from [<c0712574>] (dump_stack+0xb4/0xd0)
328[<c0712574>] (dump_stack) from [<c010b0c4>] (do_handle_IPI+0x80/0x140)
329[<c010b0c4>] (do_handle_IPI) from [<c010b198>] (ipi_handler+0x14/0x20)
330[<c010b198>] (ipi_handler) from [<c015d658>] (handle_percpu_devid_irq+0x4c/0xf4)
331[<c015d658>] (handle_percpu_devid_irq) from [<c01588fc>] (generic_handle_irq+0x28/0x38)
332[<c01588fc>] (generic_handle_irq) from [<c0158ea8>] (__handle_domain_irq+0x90/0xa0)
333[<c0158ea8>] (__handle_domain_irq) from [<c037d9a8>] (gic_handle_irq+0x6c/0x7c)
334[<c037d9a8>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0xa8)
335Exception stack(0xc1085f20 to 0xc1085f68)
3365f20: 00000000 00000000 1e01b000 deb5c2c0 deb5b638 27f63e1f 00000000 00000000
3375f40: c0c3a700 00000000 27f63e1f 00000000 00000011 c1085f70 c058776c c0587790
3385f60: 60000013 ffffffff
339[<c0100b0c>] (__irq_svc) from [<c0587790>] (cpuidle_enter_state+0x110/0x284)
340[<c0587790>] (cpuidle_enter_state) from [<c0587940>] (cpuidle_enter+0x28/0x38)
341[<c0587940>] (cpuidle_enter) from [<c013f530>] (do_idle+0x240/0x264)
342[<c013f530>] (do_idle) from [<c013f6bc>] (cpu_startup_entry+0x18/0x1c)
343[<c013f6bc>] (cpu_startup_entry) from [<001014ac>] (0x1014ac)
344---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2) ]---
345INFO: [LAUNCH_EMULATOR] Killing process in file /home/user/vitis-workspace/zedboard-hls-test/vector-addition_system/Emulation-SW/emulation.pid
346qemu-system-aarch64: terminating on signal 15 from pid 1122180 ()
347
348Successfully killed launch_emulator process