· 6 years ago · Nov 13, 2019, 09:32 AM
1Format: Log Type - Time(microsec) - Message - Optional Info
2Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
3S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2.C2-00037
4S - IMAGE_VARIANT_STRING=DAASANAZA
5S - OEM_IMAGE_VERSION_STRING=administrator-p
6S - Boot Config, 0x000000e1
7B - 1566 - PBL, Start
8B - 4542 - bootable_media_detect_entry, Start
9B - 176027 - bootable_media_detect_success, Start
10B - 176031 - elf_loader_entry, Start
11B - 176644 - auth_hash_seg_entry, Start
12B - 176904 - auth_hash_seg_exit, Start
13B - 190790 - elf_segs_hash_verify_entry, Start
14B - 249902 - PBL, End
15B - 261903 - SBL1, Start
16B - 320128 - boot_flash_init, Start
17D - 30 - boot_flash_init, Delta
18B - 326746 - boot_config_data_table_init, Start
19D - 7015 - boot_config_data_table_init, Delta - (0 Bytes)
20B - 338306 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
21B - 344467 - pm_device_init, Start
22B - 347791 - pm_device_init, TEST - MSM8909 detected
23B - 353159 - pm_device_init, INFO - PM8909 is selected
24B - 367494 - PM_SET_VAL:Skip
25D - 21380 - pm_device_init, Delta
26B - 368897 - sbl1_ddr_set_params, Start
27B - 371276 - cpr_init, Start
28D - 0 - cpr_init, Delta
29B - 376919 - Pre_DDR_clock_init, Start
30D - 213 - Pre_DDR_clock_init, Delta
31D - 0 - sbl1_ddr_set_params, Delta
32B - 389912 - pm_driver_init, Start
33B - 396530 - --> Charge init
34B - 3763 - battery voltage
35B - 400038 - boot up
36B - 10 - Current status
37D - 10736 - pm_driver_init, Delta
38B - 412390 - clock_init, Start
39D - 152 - clock_init, Delta
40B - 413336 - Image Load, Start
41D - 25010 - QSEE Image Loaded, Delta - (490096 Bytes)
42B - 438376 - Image Load, Start
43D - 244 - SEC Image Loaded, Delta - (2048 Bytes)
44B - 446642 - sbl1_efs_handle_cookies, Start
45D - 671 - sbl1_efs_handle_cookies, Delta
46B - 453443 - Image Load, Start
47D - 13085 - RPM Image Loaded, Delta - (156564 Bytes)
48B - 466589 - Image Load, Start
49D - 19123 - APPSBL Image Loaded, Delta - (504460 Bytes)
50B - 485773 - QSEE Execution, Start
51D - 244 - QSEE Execution, Delta
52B - 491507 - SBL1, End
53D - 231892 - SBL1, Delta
54S - Throughput, 33000 KB/s (1153168 Bytes, 33970 us)
55S - DDR Frequency, 400 MHz
56Android Bootloader - UART_DM Initialized!!!
57[0] [0] welcome to lk
58
59[10] [10] platform_init()
60[10] [10] target_init()
61[50] [50] SDHC Running in HS200 mode
62[60] [60] Done initialization of the card
63[70] [70] pm8x41_get_is_cold_boot: cold boot
64[80] [80] Waiting for the RPM to populate smd channel table
65[80] [80] Not able to search the panel:
66[180] [180] Config MIPI_VIDEO_PANEL.
67[330] [330] Panel CMD: command mode dma test failed
68[330] [330] dsi panel init error
69[330] [330] Turn off MIPI_VIDEO_PANEL.
70[430] [430] Not able to search the panel:
71[480] [480] Config MIPI_VIDEO_PANEL.
72[630] [630] ++++Read panel signature status = 0x9800
73[630] [630] Panic Lut0 0 Lut1 fff Robest 0
74[670] [670] Turn on MIPI_VIDEO_PANEL.
75[680] [680] Video lane tested successfully
76CTRL+C: enter instruction mode
77CTRL+C: out instruction mode
78input FCT : enter instruction mode
79[4800] [4800] is_enter_fctmode ch:�
80 out fct instruction mode
81[4810] [4810] Recovery command: 32 normal1
82[4810] [4810] Unable to locate /bootselect partition
83[4820] [4820] boot_verifier: Device is in ORANGE boot state.
84[4820] [4820] Device is unlocked! Skipping verification...
85[4830] [4830] Loading boot image (16930816): start
86[4940] [4940] Loading boot image (16930816): done
87[4940] [4940] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
88[4970] [4970] Best match DTB tags 245/00000008/0x00000000/0/1000d/0/0/0/90a4039e/28118
89[4980] [4980] Using pmic info 0x1000d/0x0/0x0/0x0 for device 0x1010d/0x0/0x0/0x0
90[4980] [4980] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk buildvariant=userdebug androidboot.bootdevice=782490[5010] [5010] Updating device tree: start
91[5020] [5020] Updating device tree: done
92[5030] [5030] Channel alloc freed
93[5040] [5040] Turn off MIPI_VIDEO_PANEL.
94[5040] [5040] Continuous splash enabled, keeping panel alive.
95[5040] [5040] booting linux @ 0x80008000, ramdisk @ 0x82000000 (1350260), tags/device tree @ 0x81e00000
96[ 0.000000] Booting Linux on physical CPU 0x0
97[ 0.000000] Initializing cgroup subsys cpu
98[ 0.000000] Initializing cgroup subsys cpuacct
99[ 0.000000] Linux version 3.10.49-gc25540a-00044-gbf65be3-dirty (BspDeveloper2@BspDeveloper2) (gcc version 4.8 (GCC) ) #3 SMP PREEMPT Wed Nov 6 13:24:00 IST 2019
100[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
101[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
102[ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8909 (Flattened Device Tree), model: Qualcomm Technologies, Inc. MSM8909-PM8909 1GB MTP
103[ 0.000000] cma: Found external_image__region@0, memory base 0x87a00000, size 6 MiB, limit 0xffffffff
104[ 0.000000] cma: Found modem_adsp_region@0, memory base 0x88000000, size 85 MiB, limit 0xffffffff
105[ 0.000000] cma: Found pheripheral_region@0, memory base 0x8d500000, size 7 MiB, limit 0xffffffff
106[ 0.000000] cma: Found venus_qseecom_region@0, memory base 0x00000000, size 6 MiB, limit 0x90000000
107[ 0.000000] cma: Found audio_region@0, memory base 0x00000000, size 3 MiB, limit 0xffffffff
108[ 0.000000] cma: Found splash_region@83000000, memory base 0x83000000, size 12 MiB, limit 0xffffffff
109[ 0.000000] cma: CMA: reserved 6 MiB at 0x87a00000 for external_image_mem
110[ 0.000000] cma: CMA: reserved 85 MiB at 0x88000000 for modem_adsp_mem
111[ 0.000000] cma: CMA: reserved 7 MiB at 0x8d500000 for peripheral_mem
112[ 0.000000] cma: CMA: reserved 8 MiB at 0x8f800000 for venus_qseecom_mem
113[ 0.000000] cma: CMA: reserved 4 MiB at 0xff800000 for audio_mem
114[ 0.000000] cma: CMA: reserved 12 MiB at 0x83000000 for cont_splash_mem
115[ 0.000000] cma: CMA: reserved 8 MiB at 0xaf000000 for default region
116[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
117[ 0.000000] PERCPU: Embedded 14 pages/cpu @c6c54000 s33472 r8192 d15680 u57344
118[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 494639
119[ 0.000000] Kernel command line: sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk buildvariant=userdebug androidboot.bootdevice=7824900.sdhci androidboot.serialno=3122bcdb androidboot.baseband=msm mdss_mdp3.panel=1:dsi:0:qcom,mdss_dsi_ili9881c_720p_video:1:none
120[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
121[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
122[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
123[ 0.000000] Memory: 1893768K/1996796K available (10541K kernel code, 1078K rwdata, 4600K rodata, 1420K init, 1349K bss, 103028K reserved, 1314812K highmem)
124[ 0.000000] Virtual kernel memory layout:
125[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
126[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
127[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
128[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
129[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
130[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
131[ 0.000000] .text : 0xc0008000 - 0xc0fc96f4 (16134 kB)
132[ 0.000000] .init : 0xc1000000 - 0xc11632c0 (1421 kB)
133[ 0.000000] .data : 0xc1164000 - 0xc127199c (1079 kB)
134[ 0.000000] .bss : 0xc1271a60 - 0xc13c2fe4 (1350 kB)
135[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
136[ 0.000000] HMP scheduling enabled.
137[ 0.000000] Preemptible hierarchical RCU implementation.
138[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
139[ 0.000000] NR_IRQS:16 nr_irqs:16 16
140[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
141[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
142[ 0.000000] Switching to timer-based delay loop
143[ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns
144[ 0.000000] Console: colour dummy device 80x30
145[ 0.000000] kmemleak: Kernel memory leak detector disabled
146[ 0.000837] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
147[ 0.000856] pid_max: default: 32768 minimum: 301
148[ 0.001218] Security Framework initialized
149[ 0.001260] SELinux: Initializing.
150[ 0.001545] Mount-cache hash table entries: 512
151[ 0.003217] Initializing cgroup subsys debug
152[ 0.003238] Initializing cgroup subsys freezer
153[ 0.003292] CPU: Testing write buffer coherency: ok
154[ 0.004182] /cpus/cpu@0 missing clock-frequency property
155[ 0.004205] /cpus/cpu@1 missing clock-frequency property
156[ 0.004225] /cpus/cpu@2 missing clock-frequency property
157[ 0.004246] /cpus/cpu@3 missing clock-frequency property
158[ 0.004263] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
159[ 0.004422] Setting up static identity map for 0xc0ab11f8 - 0xc0ab1250
160[ 0.006484] ftrace: Allocated trace_printk buffers
161[ 0.031192] MSM Memory Dump base table set up
162[ 0.031280] MSM Memory Dump apps data table set up
163[ 0.031327] Configuring XPU violations to be fatal errors
164[ 0.041169] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
165[ 0.051220] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
166[ 0.060887] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
167[ 0.061188] Brought up 4 CPUs
168[ 0.061221] SMP: Total of 4 processors activated (153.60 BogoMIPS).
169[ 0.061231] CPU: All CPU(s) started in SVC mode.
170[ 0.083080] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
171[ 0.083114] ------------[ cut here ]------------
172[ 0.083140] WARNING: at /home/nvme/sc20/kernel/fs/proc/generic.c:102 __xlate_proc_name+0xa0/0xb4()
173[ 0.083150] name 'cpu/vfp_bounce'
174[ 0.083158] Modules linked in:
175[ 0.083177] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.49-gc25540a-00044-gbf65be3-dirty #3
176[ 0.083208] [<c010be54>] (unwind_backtrace+0x0/0x11c) from [<c0109a04>] (show_stack+0x10/0x14)
177[ 0.083235] [<c0109a04>] (show_stack+0x10/0x14) from [<c0121784>] (warn_slowpath_common+0x4c/0x6c)
178[ 0.083262] [<c0121784>] (warn_slowpath_common+0x4c/0x6c) from [<c01217d0>] (warn_slowpath_fmt+0x2c/0x3c)
179[ 0.083287] [<c01217d0>] (warn_slowpath_fmt+0x2c/0x3c) from [<c024ba0c>] (__xlate_proc_name+0xa0/0xb4)
180[ 0.083310] [<c024ba0c>] (__xlate_proc_name+0xa0/0xb4) from [<c024ba6c>] (__proc_create+0x4c/0xf4)
181[ 0.083332] [<c024ba6c>] (__proc_create+0x4c/0xf4) from [<c024be50>] (proc_create_data+0x58/0x98)
182[ 0.083359] [<c024be50>] (proc_create_data+0x58/0x98) from [<c1002e34>] (vfp_init+0x16c/0x1d8)
183[ 0.083383] [<c1002e34>] (vfp_init+0x16c/0x1d8) from [<c0100670>] (do_one_initcall+0xb8/0x160)
184[ 0.083407] [<c0100670>] (do_one_initcall+0xb8/0x160) from [<c1000be4>] (kernel_init_freeable+0x10c/0x1d0)
185[ 0.083433] [<c1000be4>] (kernel_init_freeable+0x10c/0x1d0) from [<c0a9708c>] (kernel_init+0x8/0xe4)
186[ 0.083457] [<c0a9708c>] (kernel_init+0x8/0xe4) from [<c0105ff8>] (ret_from_fork+0x14/0x3c)
187[ 0.083504] ---[ end trace da227214a82491b7 ]---
188[ 0.083514] Failed to create procfs node for VFP bounce reporting
189[ 0.087022] pinctrl core: initialized pinctrl subsystem
190[ 0.087705] regulator-dummy: no parameters
191[ 0.103216] NET: Registered protocol family 16
192[ 0.117345] DMA: preallocated 256 KiB pool for atomic coherent allocations
193[ 0.180209] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
194[ 0.189213] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
195[ 0.189611] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
196[ 0.192087] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
197[ 0.196845] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
198[ 0.197221] cma: Assigned CMA region at 0 to 4080000.qcom,mss device
199[ 0.210552] KPI: Bootloader start count = 18488
200[ 0.210568] KPI: Bootloader end count = 184209
201[ 0.210578] KPI: Bootloader display count = 40472
202[ 0.210588] KPI: Bootloader load kernel count = 3563
203[ 0.210598] KPI: Kernel MPM timestamp = 281033
204[ 0.210607] KPI: Kernel MPM Clock frequency = 32768
205[ 0.210638] socinfo_print: v10, id=245, ver=2.0, raw_id=2400, raw_ver=1, hw_plat=8, hw_plat_ver=65536
206[ 0.210638] accessory_chip=0, hw_plat_subtype=0, pmic_model=65549, pmic_die_revision=65537 foundry_id=1 serial_number=270169395
207[ 0.211811] smd_channel_probe_worker: allocation table not initialized
208[ 0.211989] smd_channel_probe_worker: allocation table not initialized
209[ 0.219862] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
210[ 0.219877] hw-breakpoint: maximum watchpoint size is 8 bytes.
211[ 0.220582] msm_mpm_dev_probe(): Cannot get clk resource for XO
212[ 0.220617] platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
213[ 0.221200] msm-jtag-fuse 5e01c.jtagfuse: JTag Fuse initialized
214[ 0.223362] pm8909_s1_corner: 0 <--> 0 mV at 0 mV normal idle
215[ 0.224227] pm8909_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
216[ 0.225062] pm8909_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
217[ 0.225829] pm8909_s1_corner_so: 0 <--> 0 mV at 0 mV normal idle
218[ 0.226643] pm8909_s2: 1850 mV normal idle
219[ 0.227469] pm8909_l1: 1000 mV normal idle
220[ 0.228296] pm8909_l2: 1200 mV normal idle
221[ 0.229096] pm8909_l3: 500 <--> 1350 mV at 0 mV normal idle
222[ 0.229864] pm8909_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle
223[ 0.230685] pm8909_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle
224[ 0.231504] pm8909_l4: 1800 mV normal idle
225[ 0.232376] pm8909_l5: 1800 mV normal idle
226[ 0.233273] pm8909_l6: 1800 mV normal idle
227[ 0.234111] pm8909_l7: 1800 mV normal idle
228[ 0.234812] pm8909_l7_ao: 1800 mV normal idle
229[ 0.235592] pm8909_l7_so: 1800 mV normal idle
230[ 0.236456] pm8909_l8: 2850 <--> 2900 mV at 2850 mV normal idle
231[ 0.237245] pm8909_l9: 3000 <--> 3300 mV at 3000 mV normal idle
232[ 0.238131] pm8909_l10: 1225 <--> 1300 mV at 1225 mV normal idle
233[ 0.239011] pm8909_l11: 1800 <--> 2950 mV at 1800 mV normal idle
234[ 0.239802] pm8909_l12: 1800 <--> 2950 mV at 1800 mV normal idle
235[ 0.240769] pm8909_l13: 3075 mV normal idle
236[ 0.241596] pm8909_l14: 1800 <--> 3000 mV at 1800 mV normal idle
237[ 0.242477] pm8909_l15: 1800 <--> 3000 mV at 1800 mV normal idle
238[ 0.243280] pm8909_l17: 2800 <--> 2850 mV at 2800 mV normal idle
239[ 0.244139] pm8909_l18: 2700 mV normal idle
240[ 0.246015] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
241[ 0.246220] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
242[ 0.246239] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
243[ 0.246279] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
244[ 0.246554] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
245[ 0.246628] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
246[ 0.246645] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
247[ 0.246677] platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
248[ 0.246929] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
249[ 0.247000] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
250[ 0.247016] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
251[ 0.247048] platform 78b9000.i2c: Driver i2c-msm-v2 requests probe deferral
252[ 0.247296] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
253[ 0.247366] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
254[ 0.247383] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
255[ 0.247414] platform 78b7000.i2c: Driver i2c-msm-v2 requests probe deferral
256[ 0.247664] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
257[ 0.247735] i2c-msm-v2 78b5000.i2c: error on clk_get(core_clk):-517
258[ 0.247752] i2c-msm-v2 78b5000.i2c: error probe() failed with err:-517
259[ 0.247783] platform 78b5000.i2c: Driver i2c-msm-v2 requests probe deferral
260[ 0.253314] sps:sps is ready.
261[ 0.265408] qcom,rpmcc-8909 1800000.qcom,rpmcc: Registered RPM clocks.
262[ 0.285487] qcom,gcc-8909 1800000.qcom,gcc: Registered GCC clocks
263[ 0.286643] clock-a7 b011050.qcom,clock-a7: Speed bin: 2 PVS Version: 0
264[ 0.288959] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
265[ 0.289070] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
266[ 0.289087] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
267[ 0.289646] i2c i2c-2: of_i2c: modalias failure on /soc/i2c@78b6000/nq@28
268[ 0.289970] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
269[ 0.290065] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
270[ 0.290081] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
271[ 0.290854] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
272[ 0.290946] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
273[ 0.290961] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
274[ 0.292350] kworker/u8:2 (51) used greatest stack depth: 6892 bytes left
275[ 0.292501] kworker/u8:2 (50) used greatest stack depth: 6716 bytes left
276[ 0.293124] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
277[ 0.293319] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
278[ 0.293338] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
279[ 0.296847] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
280[ 0.296951] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
281[ 0.296969] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
282[ 0.348929] bio: create slab <bio-0> at 0
283[ 0.351445] spk_vreg: no parameters
284[ 0.352249] oem_otg_ext_vreg: no parameters
285[ 0.354035] SCSI subsystem initialized
286[ 0.354951] usbcore: registered new interface driver usbfs
287[ 0.355046] usbcore: registered new interface driver hub
288[ 0.355299] usbcore: registered new device driver usb
289[ 0.355556] media: Linux media interface: v0.10
290[ 0.355632] Linux video capture interface: v2.00
291[ 0.355887] BATTERY: batterydata_init: Battery-data device created!
292[ 0.357532] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
293[ 0.357792] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
294[ 0.358064] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
295[ 0.358384] ION heap system created
296[ 0.358648] ION heap qsecom created at 0x8f800000 with size 600000
297[ 0.358676] ION heap audio created at 0xff800000 with size 314000
298[ 0.358700] ION heap pil_2 created at 0x88000000 with size 5500000
299[ 0.359165] msm_bus_fabric_init_driver
300[ 0.359436] msm_bus_device 580000.ad-hoc-bus: Dev 0
301[ 0.359459] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
302[ 0.359656] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
303[ 0.359693] msm_bus_device 580000.ad-hoc-bus: Dev 4096
304[ 0.359713] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
305[ 0.359724] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
306[ 0.359865] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
307[ 0.359899] msm_bus_device 580000.ad-hoc-bus: Dev 1024
308[ 0.359917] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
309[ 0.359929] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
310[ 0.360083] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
311[ 0.360117] msm_bus_device 580000.ad-hoc-bus: Dev 2048
312[ 0.360136] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
313[ 0.360172] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048
314[ 0.363231] msm_bus_init_clk: Valid node clk node 0 ctx 0
315[ 0.363243] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
316[ 0.363356] msm_bus_init_clk: Valid node clk node 4096 ctx 1msm_bus_init_clk: Valid node clk node 1024 ctx 0
317[ 0.363488] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid Iface clk node 1024
318[ 0.363587] msm_bus_init_clk: Valid node clk node 2048 ctx 0msm_bus_init_clk: Valid node clk node 2048 ctx 1
319[ 0.378100] gdsc_venus: no parameters
320[ 0.378567] gdsc_mdss: no parameters
321[ 0.379051] gdsc_vfe: no parameters
322[ 0.379496] gdsc_oxili_gx: no parameters
323[ 0.379876] gdsc_venus_core0: fast normal
324[ 0.380967] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
325[ 0.382145] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
326[ 0.383218] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at f0320000, with 2 ctx banks
327[ 0.384072] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at f0380000, with 22 ctx banks
328[ 0.391051] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
329[ 0.391252] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
330[ 0.391473] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context MSA0_Audio using bank 2
331[ 0.391656] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
332[ 0.391839] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
333[ 0.392023] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
334[ 0.392205] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
335[ 0.392388] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
336[ 0.392572] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
337[ 0.392822] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
338[ 0.393113] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
339[ 0.393325] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
340[ 0.393514] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
341[ 0.393764] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
342[ 0.393961] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
343[ 0.394185] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
344[ 0.394372] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
345[ 0.394552] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
346[ 0.394759] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
347[ 0.394943] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
348[ 0.395125] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
349[ 0.395306] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context qpic using bank 10
350[ 0.395488] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context wlan using bank 17
351[ 0.395674] msm_iommu_ctx 1e3f000.qcom,iommu-ctx: context periph_CE_secure using bank 31
352[ 0.397398] Advanced Linux Sound Architecture Driver Initialized.
353[ 0.398213] Bluetooth: ee855f10
354[ 0.398274] NET: Registered protocol family 31
355[ 0.398282] Bluetooth: ee855f10
356[ 0.398300] Bluetooth: ee855f08Bluetooth: ee855ef8
357[ 0.398395] Bluetooth: ee855f00[ 0.398843] cfg80211: Calling CRDA to update world regulatory domain
358[ 0.398881] cfg80211: World regulatory domain updated:
359[ 0.398889] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
360[ 0.398898] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
361[ 0.398908] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
362[ 0.398917] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
363[ 0.398926] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
364[ 0.398935] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
365[ 0.398945] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
366[ 0.398953] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
367[ 0.398963] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
368[ 0.400006] Switching to clocksource arch_sys_counter
369[ 0.464540] NET: Registered protocol family 2
370[ 0.465413] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
371[ 0.465983] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
372[ 0.466157] TCP: Hash tables configured (established 8192 bind 8192)
373[ 0.466345] TCP: reno registered
374[ 0.466431] UDP hash table entries: 512 (order: 2, 24576 bytes)
375[ 0.466532] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
376[ 0.466957] NET: Registered protocol family 1
377[ 0.467955] gcc-mdss-8909 qcom,gcc-mdss.31: Registered GCC MDSS clocks.
378[ 0.468667] Trying to unpack rootfs image as initramfs...
379[ 0.560958] Freeing initrd memory: 1316K (c2000000 - c2149000)
380[ 0.563921] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
381[ 0.568289] Initialise module verification
382[ 0.568364] audit: initializing netlink socket (disabled)
383[ 0.568408] type=2000 audit(0.549:1): initialized
384[ 0.789222] bounce pool size: 64 pages
385[ 0.800545] fuse init (API version 7.23)
386[ 0.805948] Key type asymmetric registered
387[ 0.805961] Asymmetric key parser 'x509' registered
388[ 0.806300] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
389[ 0.806312] io scheduler noop registered
390[ 0.806320] io scheduler deadline registered
391[ 0.806354] io scheduler row registered
392[ 0.806553] io scheduler cfq registered (default)
393[ 0.810818] platform qcom,smp2pgpio-ssr-smp2p-4-in.14: Driver smp2pgpio requests probe deferral
394[ 0.811085] platform qcom,smp2pgpio-ssr-smp2p-4-out.15: Driver smp2pgpio requests probe deferral
395[ 0.811378] platform qcom,smp2pgpio-ssr-smp2p-1-in.16: Driver smp2pgpio requests probe deferral
396[ 0.811636] platform qcom,smp2pgpio-ssr-smp2p-1-out.17: Driver smp2pgpio requests probe deferral
397[ 0.815343] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
398[ 0.815694] mdss_dsi_panel_init: Panel Name = ili9881c 720p video mode dsi panel
399[ 0.816109] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
400[ 0.816134] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
401[ 0.816175] mdss_dsi_parse_panel_features: ulps feature disabled
402[ 0.816190] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
403[ 0.816201] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
404[ 0.816226] mdss_dsi_parse_panel_features:1235, Disp_en gpio not specified
405[ 0.816248] mdss_dsi_panel_init: Continuous splash enabled
406[ 0.816728] dsi_panel_device_register:1884, TE gpio not specified
407[ 0.816746] dsi_panel_device_register: bklt_en gpio not specified
408[ 0.816888] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517
409[ 0.816895] PLL 1 Clock's did not register
410[ 0.816923] mdss_dsi_retrieve_ctrl_resources: ctrl_base=f00fc000 ctrl_size=25c phy_base=f00fe500 phy_size=2b0
411[ 0.816937] dsi_panel_device_register: Using default BTA for ESD check
412[ 0.831070] mdss_register_panel: adding framebuffer device 1ac8000.qcom,mdss_dsi
413[ 0.833362] mdss_dsi_status_init: DSI status check interval:5000
414[ 0.834832] mdp3_alloc: allocating 12582912 bytes at c3000000 (83000000 phys) for fb 0
415[ 0.835166] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
416[ 0.835175] mdp3_ctrl_init: mdp3_ctrl_init
417[ 0.835280] mdp3 1a00000.qcom,mdss_mdp: Unbalanced pm_runtime_enable!
418[ 0.838230] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
419[ 0.840762] msm_rpm_log_probe: OK
420[ 0.844985] NET: Registered protocol family 27
421[ 0.850052] In memshare_probe, Memshare probe success
422[ 0.852514] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
423[ 0.852541] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
424[ 0.854478] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
425[ 0.854685] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
426[ 0.856148] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
427[ 0.856192] AXI: get_pdata(): Error: Client name not found
428[ 0.856200] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
429[ 0.856208] msm_serial_hsl_probe: Bus scaling is disabled
430[ 0.856313] 78af000.serial: ttyHSL0 at MMIO 0x78af000 (irq = 139) is a MSM
431[ 0.856374] msm_hsl_console_setup: console setup on port #0
432[ 1.010155] msm_thermal:do_freq_control Limiting CPU0 max frequency to 800000. Temp:60
433[ 1.010267] msm_thermal:do_freq_control Limiting CPU1 max frequency to 800000. Temp:60
434[ 1.010288] msm_thermal:do_freq_control Limiting CPU2 max frequency to 800000. Temp:60
435[ 1.010307] msm_thermal:do_freq_control Limiting CPU3 max frequency to 800000. Temp:60
436[ 3.064084] console [ttyHSL0] enabled
437[ 3.068184] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
438[ 3.073427] AXI: get_pdata(): Error: Client name not found
439[ 3.078791] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
440[ 3.088303] msm_serial_hsl_probe: Bus scaling is disabled
441[ 3.093809] 78b0000.serial: ttyHSL1 at MMIO 0x78b0000 (irq = 140) is a MSM
442[ 3.101266] msm_serial_hsl_init: driver initialized
443[ 3.123101] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
444[ 3.145200] brd: module loaded
445[ 3.153212] loop: module loaded
446[ 3.156263] apds993x 1-0039: Unable to read cross_talk use default 100
447[ 3.300573] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0x5 (ok)
448[ 3.308336] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x011363c8 OPER:0x00000010
449[ 3.323255] apds993x 1-0039: Neither APDS993x nor APDS990x
450[ 3.328635] apds993x 1-0039: Not a valid chip ID
451[ 3.334286] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
452[ 3.339560] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
453[ 3.345287] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
454[ 3.355141] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0[ 3.361866] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
455[ 3.369083] QSEECOM: qseecom_probe: secure app region addr=0x87a00000 size=0x200000
456[ 3.379814] i2c-core: driver [tabla-i2c-core] using legacy suspend method
457[ 3.385801] i2c-core: driver [tabla-i2c-core] using legacy resume method
458[ 3.392666] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
459[ 3.399360] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
460[ 3.406574] i2c-core: driver [tasha-i2c-core] using legacy suspend method
461[ 3.413097] i2c-core: driver [tasha-i2c-core] using legacy resume method
462[ 3.421064] SCSI Media Changer driver v0.25
463[ 3.428757] tun: Universal TUN/TAP device driver, 1.6
464[ 3.432900] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
465[ 3.443246] PPP generic driver version 2.4.2
466[ 3.446665] PPP BSD Compression module registered
467[ 3.451224] PPP Deflate Compression module registered
468[ 3.456219] PPP MPPE Compression module registered
469[ 3.461073] NET: Registered protocol family 24
470[ 3.466630] wcnss_wlan probed in built-in mode
471[ 3.474768] usbcore: registered new interface driver asix
472[ 3.479228] usbcore: registered new interface driver ax88179_178a
473[ 3.485436] usbcore: registered new interface driver cdc_ether
474[ 3.491159] usbcore: registered new interface driver net1080
475[ 3.496735] usbcore: registered new interface driver cdc_subset
476[ 3.502691] usbcore: registered new interface driver zaurus
477[ 3.508590] usbcore: registered new interface driver cdc_ncm
478[ 3.514770] msm_sharedmem: sharedmem_register_qmi: qmi init successful
479[ 3.520978] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
480[ 3.527990] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
481[ 3.535841] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
482[ 3.543978] msm_otg 78d9000.usb: msm_otg probe
483[ 3.552442] msm_otg 78d9000.usb: OTG regs = f01f4000
484[ 3.559890] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
485[ 3.565453] ehci-msm: Qualcomm On-Chip EHCI Host Controller
486[ 3.571787] ehci-msm2: Qualcomm EHCI Host Controller
487[ 3.576623] usbcore: registered new interface driver cdc_acm
488[ 3.581600] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
489[ 3.589622] usbcore: registered new interface driver ccid_bridge
490[ 3.595829] ccid_bridge_init: success
491[ 3.599246] usbcore: registered new interface driver usb-storage
492[ 3.605290] usbcore: registered new interface driver ums-alauda
493[ 3.611155] usbcore: registered new interface driver ums-cypress
494[ 3.617087] usbcore: registered new interface driver ums-datafab
495[ 3.623128] usbcore: registered new interface driver ums-freecom
496[ 3.629063] usbcore: registered new interface driver ums-isd200
497[ 3.635020] usbcore: registered new interface driver ums-jumpshot
498[ 3.641130] usbcore: registered new interface driver ums-karma
499[ 3.646863] usbcore: registered new interface driver ums-onetouch
500[ 3.652990] usbcore: registered new interface driver ums-sddr09
501[ 3.658840] usbcore: registered new interface driver ums-sddr55
502[ 3.664795] usbcore: registered new interface driver ums-usbat
503[ 3.670779] usbcore: registered new interface driver usbserial
504[ 3.676378] usbcore: registered new interface driver qc_csvt
505[ 3.682073] usbserial: USB Serial support registered for qc_csvt
506[ 3.688060] usbcore: registered new interface driver usb_ehset_test
507[ 3.696822] msm_otg 78d9000.usb: phy_reset: success
508[ 3.697910] mousedev: PS/2 mouse device common for all mice
509[ 3.698172] usbcore: registered new interface driver xpad
510[ 3.700230] Goodix-TS 5-005d: +++++++++++++++++for debug++++++++++
511[ 3.700316] Goodix-TS 5-005d: ++++power gpio [944]!
512[ 3.700327] Goodix-TS 5-005d: ++++IO power_en gpio [923]successfully
513[ 3.700366] Goodix-TS 5-005d: Regulator get failed avdd ret=-19
514[ 3.700380] Goodix-TS 5-005d: Regulator get failed vdd ret=-19
515[ 3.700951] Goodix-TS 5-005d: ++++set sleep power_gpio on
516[ 3.701365] Goodix-TS 5-005d: Can not lookup pmx_ts_release pinstate -19
517[ 3.820655] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0x8 (ok)
518[ 3.827973] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000080
519[ 3.867629] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
520[ 3.875164] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000080
521[ 3.915069] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
522[ 3.922593] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000080
523[ 3.962506] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
524[ 3.969984] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000080
525[ 4.009934] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
526[ 4.017463] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000080
527[ 4.057347] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
528[ 4.064857] Goodix-TS 5-005d: init external watchdog failed!
529[ 4.070495] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
530[ 4.110415] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
531[ 4.117838] Goodix-TS 5-005d: I2C retry: 1
532[ 4.122000] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
533[ 4.161942] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
534[ 4.169365] Goodix-TS 5-005d: I2C retry: 2
535[ 4.173527] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
536[ 4.213451] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
537[ 4.220922] Goodix-TS 5-005d: I2C retry: 3
538[ 4.224987] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
539[ 4.264962] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
540[ 4.272431] Goodix-TS 5-005d: I2C retry: 4
541[ 4.276499] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
542[ 4.316478] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
543[ 4.323942] Goodix-TS 5-005d: I2C retry: 5
544[ 4.327958] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
545[ 4.333993] Goodix-TS 5-005d: GTP i2c test failed time 4.
546[ 4.360192] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
547[ 4.399199] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
548[ 4.406669] Goodix-TS 5-005d: I2C retry: 1
549[ 4.410779] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
550[ 4.450718] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
551[ 4.458140] Goodix-TS 5-005d: I2C retry: 2
552[ 4.462301] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
553[ 4.502228] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
554[ 4.509651] Goodix-TS 5-005d: I2C retry: 3
555[ 4.513809] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
556[ 4.553749] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
557[ 4.561215] Goodix-TS 5-005d: I2C retry: 4
558[ 4.565285] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
559[ 4.605263] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
560[ 4.612731] Goodix-TS 5-005d: I2C retry: 5
561[ 4.616744] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
562[ 4.622777] Goodix-TS 5-005d: GTP i2c test failed time 3.
563[ 4.650191] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
564[ 4.689194] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
565[ 4.696663] Goodix-TS 5-005d: I2C retry: 1
566[ 4.700774] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
567[ 4.740706] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
568[ 4.748129] Goodix-TS 5-005d: I2C retry: 2
569[ 4.752289] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
570[ 4.792220] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
571[ 4.799643] Goodix-TS 5-005d: I2C retry: 3
572[ 4.803806] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
573[ 4.843725] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
574[ 4.851192] Goodix-TS 5-005d: I2C retry: 4
575[ 4.855262] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
576[ 4.895228] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
577[ 4.902695] Goodix-TS 5-005d: I2C retry: 5
578[ 4.906709] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
579[ 4.912742] Goodix-TS 5-005d: GTP i2c test failed time 2.
580[ 4.940190] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
581[ 4.979195] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
582[ 4.986662] Goodix-TS 5-005d: I2C retry: 1
583[ 4.990774] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
584[ 5.030715] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
585[ 5.038139] Goodix-TS 5-005d: I2C retry: 2
586[ 5.042299] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
587[ 5.082644] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
588[ 5.090119] Goodix-TS 5-005d: I2C retry: 3
589[ 5.094185] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
590[ 5.134165] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
591[ 5.141633] Goodix-TS 5-005d: I2C retry: 4
592[ 5.145702] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
593[ 5.185682] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
594[ 5.193147] Goodix-TS 5-005d: I2C retry: 5
595[ 5.197163] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
596[ 5.203198] Goodix-TS 5-005d: GTP i2c test failed time 1.
597[ 5.230193] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
598[ 5.269204] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
599[ 5.276672] Goodix-TS 5-005d: I2C retry: 1
600[ 5.280785] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
601[ 5.320722] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
602[ 5.328145] Goodix-TS 5-005d: I2C retry: 2
603[ 5.332306] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
604[ 5.372248] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
605[ 5.379670] Goodix-TS 5-005d: I2C retry: 3
606[ 5.383831] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
607[ 5.423763] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
608[ 5.431231] Goodix-TS 5-005d: I2C retry: 4
609[ 5.435299] i2c-msm-v2 78b9000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x041121c4 OPER:0x00000000
610[ 5.475276] i2c-msm-v2 78b9000.i2c: error timeout on polling for valid state. check core_clk
611[ 5.482744] Goodix-TS 5-005d: I2C retry: 5
612[ 5.486756] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
613[ 5.492790] Goodix-TS 5-005d: GTP i2c test failed time 0.
614[ 5.520133] Goodix-TS 5-005d: I2C communication ERROR!
615[ 5.524425] Goodix-TS: probe of 5-005d failed with error -5
616[ 5.551324] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x30 MSTR_STS:0x011363c8 OPER:0x00000010
617[ 5.566171] mmc3416x 1-0030: read reg 6 failed.(-107)
618[ 5.571102] mmc3416x 1-0030: Check device failed
619[ 5.576198] mmc3416x: probe of 1-0030 failed with error -107
620[ 5.581489] stk3x1x_probe: driver version = 3.4.4ts
621[ 5.586248] stk_ps 1-0048: stk3x1x_probe: stk3x1x_parse_dt ret=0
622[ 5.592621] input: stk3x1x-ls as /devices/soc.0/78b5000.i2c/i2c-1/1-0048/input/input0
623[ 5.600548] input: proximity as /devices/soc.0/78b5000.i2c/i2c-1/1-0048/input/input1
624[ 5.610354] mpu6050 1-0068: Regulator get failed vi2c ret=-19
625[ 5.720345] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x68 MSTR_STS:0x011363c8 OPER:0x00000010
626[ 5.735128] mpu6050 1-0068: Fail to read power mode, ret=-107
627[ 5.740821] mpu6050 1-0068: Cannot get invalid chip type
628[ 5.746244] mpu6050 1-0068: Probe device return error-107
629[ 5.751571] mpu6050: probe of 1-0068 failed with error -107
630[ 5.757068] AKM compass driver: initialize.
631[ 5.850324] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000090
632[ 5.865011] akm8963 1-000c: akm_i2c_txdata: transfer failed.
633[ 5.870666] akm8963 1-000c: AKECS_Set_PowerDown: Can not set to powerdown mode.
634[ 5.878053] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000010
635[ 5.893565] akm8963 1-000c: akm_i2c_rxdata: transfer failed.
636[ 5.899300] akm8963: probe of 1-000c failed with error -107
637[ 5.904844] AKM compass driver: initialize.
638[ 5.908948] i2c-core: driver [bma2x2-accel] using legacy suspend method
639[ 5.915499] i2c-core: driver [bma2x2-accel] using legacy resume method
640[ 5.922222] i2c-core: driver [bmi160] using legacy suspend method
641[ 5.928034] i2c-core: driver [bmi160] using legacy resume method
642[ 5.935282] qcom,qpnp-rtc qpnp-rtc-6: rtc core: registered qpnp_rtc as rtc0
643[ 5.941655] i2c /dev entries driver
644[ 5.949559] msm_vidc_worker (169) used greatest stack depth: 6708 bytes left
645[ 5.956451] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
646[ 5.967989] msm_actuator_i2c_probe:1313 msm_actuator_i2c_probe: succeeded
647[ 5.974462] LED trigger flashlight-trigger failed to register (-17)
648[ 5.981328] adp1660 i2c_add_driver success
649[ 5.984774] msm_flash_init_module:1114 Enter
650[ 5.989185] msm_flash_lm3642_init entry
651[ 5.994012] msm_eeprom_parse_memory_map: pageen not needed
652[ 5.998476] msm_eeprom_parse_memory_map: pageen not needed
653[ 6.004006] msm_eeprom_parse_memory_map: pageen not needed
654[ 6.040979] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x9 (ok)
655[ 6.048358] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x36 MSTR_STS:0x0d1300c8 OPER:0x00000090
656[ 6.080165] read_eeprom_memory: page write failed
657[ 6.083829] msm_eeprom_i2c_probe read_eeprom_memory failed
658[ 6.120297] msm_eeprom_i2c_probe failed! rc = -107
659[ 6.124066] msm_eeprom: probe of 3-006c failed with error -107
660[ 6.132650] g_sctrl[0] ed8eb000
661[ 6.134855] msm-tlmm-pinctrl 1000000.pinctrl: does not have pin group cam_sensor_front
662[ 6.142728] msm-tlmm-pinctrl 1000000.pinctrl: could not map group config for "cam_sensor_front"
663[ 6.151435] pinmux core: msm-pinctrl does not support function cam_sensor_front-func
664[ 6.159063] msm-tlmm-pinctrl 1000000.pinctrl: invalid function cam_sensor_front-func in map table
665[ 6.167982] msm-tlmm-pinctrl 1000000.pinctrl: does not have pin group cam-sensor-front-sleep
666[ 6.176382] msm-tlmm-pinctrl 1000000.pinctrl: could not map group config for "cam-sensor-front-sleep"
667[ 6.185628] pinmux core: msm-pinctrl does not support function cam-sensor-front-sleep-func
668[ 6.193827] msm-tlmm-pinctrl 1000000.pinctrl: invalid function cam-sensor-front-sleep-func in map table
669[ 6.203395] g_sctrl[1] ed8eb800
670[ 6.206175] gc0310_init_module:487
671[ 6.214843] BMS: bms_get_adc: vadc not found - defer probe rc=-517
672[ 6.219987] BMS: qpnp_vm_bms_probe: Failed to get adc rc=-517
673[ 6.225871] spmi qpnp-vm-bms-10: Driver qcom,qpnp-vm-bms requests probe deferral
674[ 6.233482] CHG: qpnp_lbc_main_probe: Failed to read DT properties rc=-517
675[ 6.239974] spmi qpnp-linear-charger-8: Driver qcom,qpnp-linear-charger requests probe deferral
676[ 6.249581] unable to find DT imem DLOAD mode node
677[ 6.253881] unable to find DT imem EDLOAD mode node
678[ 6.259972] qpnp_vadc_get_temp: VADC read error with -517
679[ 6.260208] msm_thermal:do_freq_control Limiting CPU0 max frequency to 400000. Temp:60
680[ 6.260356] msm_thermal:do_freq_control Limiting CPU1 max frequency to 400000. Temp:60
681[ 6.260397] msm_thermal:do_freq_control Limiting CPU2 max frequency to 400000. Temp:60
682[ 6.260436] msm_thermal:do_freq_control Limiting CPU3 max frequency to 400000. Temp:60
683[ 6.296156] thermal thermal_zone0: failed to read out thermal zone 0
684[ 6.302946] qpnp_vadc_get_temp: VADC read error with -517
685[ 6.307663] thermal thermal_zone1: failed to read out thermal zone 1
686[ 6.314710] qpnp_vadc_get_temp: VADC read error with -517
687[ 6.319383] thermal thermal_zone2: failed to read out thermal zone 2
688[ 6.351424] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
689[ 6.359281] device-mapper: req-crypt: dm-req-crypt successfully initalized.
690[ 6.359281]
691[ 6.368279] cpuidle: using governor ladder
692[ 6.371455] cpuidle: using governor menu
693[ 6.375366] sdhci: Secure Digital Host Controller Interface driver
694[ 6.381506] sdhci: Copyright(c) Pierre Ossman
695[ 6.385757] sdhci-pltfm: SDHCI platform and OF driver helper
696[ 6.404298] sdhci_msm 7824900.sdhci: host_use_default_qos = 1
697[ 6.409032] sdhci_msm 7824900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
698[ 6.417734] sdhci_msm 7824900.sdhci: dma_latency = 2
699[ 6.422734] sdhci_msm 7824900.sdhci: dma_latency = 241
700[ 6.427863] sdhci_msm 7824900.sdhci: dma_latency = 501
701[ 6.433158] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
702[ 6.442528] sdhci_msm 7824900.sdhci: dma_latency = 200
703[ 6.447660] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
704[ 6.457114] sdhci_msm 7824900.sdhci: dma_latency = 200
705[ 6.462315] sdhci_msm 7824900.sdhci: Host using default pm_qos
706[ 6.470850] mmc0: no vqmmc regulator found
707[ 6.473932] mmc0: no vmmc regulator found
708[ 6.508953] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA
709[ 6.531365] sdhci_msm 7864900.sdhci: host_use_default_qos = 1
710[ 6.536102] sdhci_msm 7864900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
711[ 6.544778] sdhci_msm 7864900.sdhci: dma_latency = 2
712[ 6.549726] sdhci_msm 7864900.sdhci: dma_latency = 241
713[ 6.555014] sdhci_msm 7864900.sdhci: dma_latency = 501
714[ 6.560225] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
715[ 6.569516] sdhci_msm 7864900.sdhci: dma_latency = 200
716[ 6.574921] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
717[ 6.584185] sdhci_msm 7864900.sdhci: dma_latency = 200
718[ 6.589308] sdhci_msm 7864900.sdhci: Host using default pm_qos
719[ 6.598487] mmc1: no vqmmc regulator found
720[ 6.601664] mmc1: no vmmc regulator found
721[ 6.621469] mmc0: BKOPS_EN bit = 0
722[ 6.637331] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
723[ 6.639410] mmc0: new HS200 MMC card at address 0001
724[ 6.641752] mmcblk0: mmc0:0001 HAG4a2 14.6 GiB
725[ 6.642470] mmcblk0rpmb: mmc0:0001 HAG4a2 partition 3 4.00 MiB
726[ 6.648318] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33
727[ 6.673393] qcom,leds-qpnp: probe of leds-qpnp-7 failed with error -10
728[ 6.711615] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
729[ 6.717574] qce 720000.qcedev: CE device = 0x0
730[ 6.717574] , IO base, CE = 0xf0680000
731[ 6.717574] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
732[ 6.717574] IO base BAM = 0x (null)
733[ 6.717574] BAM IRQ 239
734[ 6.717574] Engines Availability = 0x2010853
735[ 6.741926] sps:BAM 0x00704000 is registered.
736[ 6.757783] sps:BAM 0x00704000 (va:0xf06c0000) enabled: ver:0x25, number of pipes:8
737[ 6.777454] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
738[ 6.785905] qcedev: FIPS140-2 Known Answer Tests : Skipped
739[ 6.794606] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
740[ 6.801232] qcrypto 720000.qcrypto: CE device = 0x0
741[ 6.801232] , IO base, CE = 0xf07c0000
742[ 6.801232] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
743[ 6.801232] IO base BAM = 0x (null)
744[ 6.801232] BAM IRQ 239
745[ 6.801232] Engines Availability = 0x2010853
746[ 6.850018] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
747[ 6.858597] qcrypto 720000.qcrypto: qcrypto-ecb-aes
748[ 6.863103] qcrypto 720000.qcrypto: qcrypto-cbc-aes
749[ 6.867787] qcrypto 720000.qcrypto: qcrypto-ctr-aes
750[ 6.872713] qcrypto 720000.qcrypto: qcrypto-ecb-des
751[ 6.877431] qcrypto 720000.qcrypto: qcrypto-cbc-des
752[ 6.882360] qcrypto 720000.qcrypto: qcrypto-ecb-3des
753[ 6.887241] qcrypto 720000.qcrypto: qcrypto-cbc-3des
754[ 6.892405] qcrypto 720000.qcrypto: qcrypto-xts-aes
755[ 6.897117] qcrypto 720000.qcrypto: qcrypto-sha1
756[ 6.901795] qcrypto 720000.qcrypto: qcrypto-sha256
757[ 6.906643] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
758[ 6.912723] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
759[ 6.918797] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
760[ 6.925335] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
761[ 6.931457] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
762[ 6.937756] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
763[ 6.944312] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
764[ 6.949189] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
765[ 6.954577] qcrypto 720000.qcrypto: qcrypto-aes-ccm
766[ 6.959270] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
767[ 6.964453] qcrypto: FIPS140-2 Known Answer Tests: Skipped
768[ 6.972324] usbcore: registered new interface driver usbhid
769[ 6.976870] usbhid: USB HID core driver
770[ 6.982374] zram: Created 1 device(s) ...
771[ 6.987403] ashmem: initialized
772[ 6.992485] logger: created 256K log 'log_main'
773[ 6.998858] logger: created 256K log 'log_events'
774[ 7.005514] logger: created 256K log 'log_radio'
775[ 7.012039] logger: created 256K log 'log_system'
776[ 7.017978] sps:BAM 0x078c4000 is registered.
777[ 7.022225] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
778[ 7.032014] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
779[ 7.044754] input: qpnp_pon as /devices/virtual/input/input2
780[ 7.055623] PMIC@SID0: PM8909 v1.1 options: 0, 2, 0, 0
781[ 7.108658] populate_opp_table: clock-a7: OPP tables populated (cpu 3)
782[ 7.114290] print_opp_table: clock_cpu: a7: OPP voltage for 400000000: 4
783[ 7.120939] print_opp_table: clock_cpu: a7: OPP voltage for 1094400000: 7
784[ 7.131938] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered.
785[ 7.138318] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
786[ 7.151316] devfreq qcom,cpubw.32: Couldn't update frequency transition information.
787[ 7.170839] coresight-fuse 5e01c.fuse: Fuse initialized
788[ 7.176882] coresight-cti 810000.cti: CTI initialized
789[ 7.181600] coresight-cti 811000.cti: CTI initialized
790[ 7.186575] coresight-cti 812000.cti: CTI initialized
791[ 7.191996] coresight-cti 813000.cti: CTI initialized
792[ 7.196700] coresight-cti 814000.cti: CTI initialized
793[ 7.201815] coresight-cti 815000.cti: CTI initialized
794[ 7.207054] coresight-cti 816000.cti: CTI initialized
795[ 7.211826] coresight-cti 817000.cti: CTI initialized
796[ 7.216802] coresight-cti 818000.cti: CTI initialized
797[ 7.222083] coresight-cti 851000.cti: CTI initialized
798[ 7.226844] coresight-cti 852000.cti: CTI initialized
799[ 7.232135] coresight-cti 853000.cti: CTI initialized
800[ 7.237061] coresight-cti 854000.cti: CTI initialized
801[ 7.242084] coresight-cti 83c000.cti: CTI initialized
802[ 7.247019] coresight-cti 838000.cti: CTI initialized
803[ 7.252255] coresight-cti 835000.cti: CTI initialized
804[ 7.257030] coresight-cti 830000.cti: CTI initialized
805[ 7.263410] coresight-csr 801000.csr: CSR initialized
806[ 7.269263] coresight-tmc 826000.tmc: Byte Counter feature enabled
807[ 7.274655] sps:BAM 0x00884000 is registered.
808[ 7.279411] coresight-tmc 826000.tmc: TMC initialized
809[ 7.285049] coresight-tmc 825000.tmc: TMC initialized
810[ 7.295746] nidnt boot config: 0
811[ 7.302001] coresight-tpiu 820000.tpiu: NIDnT on SDCARD only mode
812[ 7.307479] coresight-tpiu 820000.tpiu: TPIU initialized
813[ 7.314252] coresight-funnel 821000.funnel: FUNNEL initialized
814[ 7.319582] coresight-funnel 869000.funnel: FUNNEL initialized
815[ 7.325457] coresight-funnel 868000.funnel: FUNNEL initialized
816[ 7.331487] coresight-funnel 855000.funnel: FUNNEL initialized
817[ 7.337983] coresight-replicator 824000.replicator: REPLICATOR initialized
818[ 7.345639] coresight-dbgui 86d000.dbgui: DebugUI capture enabled
819[ 7.351212] coresight-dbgui 86d000.dbgui: DebugUI initializaed
820[ 7.358393] coresight-stm 802000.stm: STM initialized
821[ 7.364246] coresight-hwevent 86c000.hwevent: Hardware Event driver initialized
822[ 7.372889] coresight-etm 84c000.etm: ETM initialized
823[ 7.378061] coresight-etm 84d000.etm: ETM initialized
824[ 7.383219] coresight-etm 84e000.etm: ETM initialized
825[ 7.388259] coresight-etm 84f000.etm: ETM initialized
826[ 7.395026] coresight-modem-etm modem_etm0.26: Modem ETM initialized
827[ 7.403150] coresight-wcn-etm wcn_etm0.25: Wireless ETM initialized
828[ 7.410984] coresight-rpm-etm rpm_etm0.24: RPM ETM initialized
829[ 7.417907] coresight-qpdi 1941000.qpdi: CoreSight QPDI driver initialized
830[ 7.425394] usbcore: registered new interface driver snd-usb-audio
831[ 7.433852] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
832[ 7.440775] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
833[ 7.490938] msm-pcm-lpa qcom,msm-pcm-lpa.46: msm_pcm_probe: dev name qcom,msm-pcm-lpa.46
834[ 7.501111] platform qcom,msm-voip-dsp.48: Driver msm-voip-dsp requests probe deferral
835[ 7.509360] platform qcom,msm-pcm-voice.49: Driver msm-pcm-voice requests probe deferral
836[ 7.537821] msm8x16-asoc-wcd sound.71: default codec configured
837[ 7.547992] msm8x16-asoc-wcd sound.71: ASoC: platform (null) not registered
838[ 7.554166] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
839[ 7.561417] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
840[ 7.569041] u32 classifier
841[ 7.570843] Actions configured
842[ 7.574123] Netfilter messages via NETLINK v0.30.
843[ 7.579034] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
844[ 7.587302] ctnetlink v0.93: registering with nfnetlink.
845[ 7.593366] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
846[ 7.599306] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
847[ 7.606795] xt_time: kernel timezone is -0000
848[ 7.611193] ip_tables: (C) 2000-2006 Netfilter Core Team
849[ 7.616328] arp_tables: (C) 2002 David S. Miller
850[ 7.620451] TCP: cubic registered
851[ 7.623378] Initializing XFRM netlink socket
852[ 7.630458] NET: Registered protocol family 10
853[ 7.636736] mip6: Mobile IPv6
854[ 7.638776] ip6_tables: (C) 2000-2006 Netfilter Core Team
855[ 7.645033] sit: IPv6 over IPv4 tunneling driver
856[ 7.650565] NET: Registered protocol family 17
857[ 7.654059] NET: Registered protocol family 15
858[ 7.658721] Bridge firewalling registered
859[ 7.662572] Ebtables v2.0 registered
860[ 7.666716] Bluetooth: ee855ef0
861[ 7.668997] Bluetooth: ee855ef0Bluetooth: ee855f00
862[ 7.673693] Bluetooth: ee855ed8Bluetooth: ee855ed8
863[ 7.678499] Bluetooth: ee855ed0Bluetooth: ee855f10
864[ 7.683274] Bluetooth: ee855f10[ 7.686456] l2tp_core: L2TP core driver, V2.0
865[ 7.690873] l2tp_ppp: PPPoL2TP kernel driver, V2.0
866[ 7.695477] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
867[ 7.701215] l2tp_netlink: L2TP netlink interface
868[ 7.705737] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
869[ 7.711866] l2tp_debugfs: L2TP debugfs support
870[ 7.715964] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
871[ 7.746326] of_batterydata_read_data: palladium_1500mah loaded
872[ 7.763358] BMS: bms_load_hw_defaults: BMS_EN=1 Sample_Interval-S1=[100]S2=[70] Sample_Count-S1=[256]S2=[128] Fifo_Length-S1=[5]S2=[5] FSM_state=2
873[ 7.785168] BMS: calculate_initial_soc: warm_reset=0 est_ocv=0 shutdown_soc_invalid=0 shutdown_ocv=3806000 shutdown_soc=47 last_soc=47 calculated_soc=49 last_ocv_uv=3806000
874[ 7.814627] BMS: qpnp_vm_bms_probe: probe success: soc=47 vbatt=3670276 ocv=3806000 warm_reset=0
875[ 7.939575] CHG: qpnp_lbc_main_probe: Probe chg_dis=0 bpd=1 usb=1 batt_pres=1 batt_volt=3702332 soc=47
876[ 7.948474] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
877[ 7.956154] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
878[ 7.995341] msm8x16-asoc-wcd sound.71: default codec configured
879[ 8.005918] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
880[ 8.011787] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
881[ 8.018810] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
882[ 8.026138] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
883[ 8.033573] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
884[ 8.043133] Registering SWP/SWPB emulation handler
885[ 8.049656] Loading module verification certificates
886[ 8.072004] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: f9361c7b48d383dd47e2cb01914a510385155f43'
887[ 8.434581] oem_otg_ext_vreg: disabling
888[ 8.437406] spk_vreg: disabling
889[ 8.440775] regulator-dummy: disabling
890[ 8.446059] msm8x16-asoc-wcd sound.71: default codec configured
891[ 8.456655] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
892[ 8.462607] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
893[ 8.469546] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
894[ 8.476896] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
895[ 8.484316] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
896[ 8.496148] file system registered
897[ 8.498752] mbim_init: initialize 1 instances
898[ 8.503233] mbim_init: Initialized 1 ports
899[ 8.506943] mbim_bam_setup: no_ports:1
900[ 8.511579] mbim_bam_setup: Initialized 1 ports
901[ 8.520507] rndis_qc_init: initialize rndis QC instance
902[ 8.526877] android_usb gadget: Mass Storage Function, version: 2009/09/11
903[ 8.532824] android_usb gadget: Number of LUNs=1
904[ 8.537339] lun0: LUN: removable file: (no medium)
905[ 8.543779] android_usb gadget: android_usb ready
906[ 8.547472] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
907[ 8.553517] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
908[ 8.562314] msm8x16-asoc-wcd sound.71: default codec configured
909[ 8.566918] input: gpio-keys as /devices/soc.0/gpio_keys.70/input/input3
910[ 8.574177] qcom,qpnp-rtc qpnp-rtc-6: setting system clock to 1970-01-01 00:05:25 UTC (325)
911[ 8.579728] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
912[ 8.579835] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
913[ 8.580288] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
914[ 8.580562] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
915[ 8.580737] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
916[ 8.582355] msm8x16-asoc-wcd sound.71: default codec configured
917[ 8.588010] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
918[ 8.588108] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
919[ 8.588456] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
920[ 8.648134] msm_thermal:interrupt_mode_init Interrupt mode init
921[ 8.653173] msm_thermal:disable_msm_thermal Max frequency reset for CPU0
922[ 8.660679] msm_thermal:disable_msm_thermal Max frequency reset for CPU1
923[ 8.666426] msm_thermal:disable_msm_thermal Max frequency reset for CPU2
924[ 8.673141] msm_thermal:disable_msm_thermal Max frequency reset for CPU3
925[ 8.681734] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
926[ 8.682451] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
927[ 8.696803] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
928[ 8.705206] msm8x16-asoc-wcd sound.71: default codec configured
929[ 8.707652] led_gpio_flash_probe:probe successfully!
930[ 8.711932] qcom,cc-debug-8909 1874000.qcom,cc-debug: Registered Debug Mux successfully
931[ 8.712683] ---+++ get pwm-freq prop failed
932[ 8.712686] ---+++ get pwm-duty prop failed
933[ 8.712808] ---+++ gpio_clk_probe succeeded
934[ 8.713181] clock_late_init: Removing enables held for handed-off clocks
935[ 8.716141] ALSA device list:
936[ 8.716144] No soundcards[ 8.749584] Freeing unused kernel memory: 396K (c1100000 - c1163000)
937[ 8.751167] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
938[ 8.751218] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
939[ 8.751365] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
940[ 8.751511] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
941[ 8.751578] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
942[ 8.752323] msm8x16-asoc-wcd sound.71: default codec configured
943[ 8.754425] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
944[ 8.754467] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
945[ 8.754608] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
946[ 8.821741] init: init first stage started!
947[ 8.942290] type=1403 audit(325.869:2): policy loaded auid=4294967295 ses=4294967295
948[ 8.950443] type=1404 audit(325.879:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
949[ 9.070489] init: (Initializing SELinux enforcing took 0.25s.)
950[ 9.085113] init: init second stage started!
951[ 9.101840] init: property_set("ro.boot.bootdevice", "7824900.sdhci") failed
952[ 9.116272] init: Running restorecon...
953[ 9.421069] init: waitpid failed: No child processes
954[ 9.425734] init: (Loading properties from /default.prop took 0.00s.)
955[ 9.436347] init: /init.rc: 679: invalid keyword 'setprop'
956[ 9.440982] init: /init.rc: 680: invalid keyword 'chmod'
957[ 9.446118] init: /init.rc: 681: invalid keyword 'chown'
958[ 9.451701] init: (Parsing /init.environ.rc took 0.00s.)
959[ 9.457954] init: (Parsing /init.usb.rc took 0.00s.)
960[ 9.467007] init: /init.qcom.rc: 582: user requires 1 argument
961[ 9.474773] init: ignored duplicate definition of service 'RIDL'init: (Parsing init.qcom.usb.rc took 0.01s.)
962[ 9.497112] init: ignored duplicate definition of service 'perfd'init: init.target.rc: 151: invalid keyword 'load_all_props'
963[ 9.508472] init: ignored duplicate definition of service 'poweroffhandler'init: (Parsing init.carrier.rc took 0.01s.)
964[ 9.518147] init: (Parsing init.target.rc took 0.02s.)
965[ 9.525159] init: (Parsing init.qcom.factory.rc took 0.00s.)
966[ 9.529806] init: (Parsing /init.qcom.rc took 0.07s.)
967[ 9.537574] init: (Parsing /init.usb.configfs.rc took 0.00s.)
968[ 9.542626] init: (Parsing /init.zygote32.rc took 0.00s.)
969[ 9.547695] init: (Parsing /init.rc took 0.12s.)
970[ 9.553478] init: Starting service 'ueventd'...
971[ 9.559383] init: Waiting for /dev/.coldboot_done...
972[ 9.563728] ueventd: ueventd started!
973[ 10.603249] ueventd: Coldboot took 1.03s.
974[ 10.608516] init: Waiting for /dev/.coldboot_done took 1.05s.
975[ 10.632496] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
976[ 10.653889] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
977[ 10.765948] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
978[ 10.773657] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
979[ 10.783520] EXT4-fs (mmcblk0p33): Ignoring removed nomblk_io_submit option
980[ 10.796548] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
981[ 10.806407] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success
982[ 10.817012] fs_mgr: check_fs(): unmount(/data) succeeded
983[ 10.822980] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
984[ 11.750195] e2fsck (236) used greatest stack depth: 5360 bytes left
985[ 11.755776] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
986[ 11.755776]
987[ 11.761525] e2fsck: Pass 1: Checking inodes, blocks, and sizes
988[ 11.761525]
989[ 11.768717] e2fsck: Pass 2: Checking directory structure
990[ 11.768717]
991[ 11.775558] e2fsck: Pass 3: Checking directory connectivity
992[ 11.775558]
993[ 11.782604] e2fsck: Pass 4: Checking reference counts
994[ 11.782604]
995[ 11.789030] e2fsck: Pass 5: Checking group summary information
996[ 11.789030]
997[ 11.796447] e2fsck: data: 3973/316992 files (7.4% non-contiguous), 115087/1267451 blocks
998[ 11.796447]
999[ 11.811916] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard
1000[ 11.821615] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
1001[ 11.835033] init (229) used greatest stack depth: 5208 bytes left
1002[ 11.850899] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
1003[ 11.856751] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
1004[ 11.863313] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
1005[ 11.869735] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
1006[ 11.876208] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
1007[ 11.882717] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
1008[ 11.888999] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
1009[ 11.895825] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
1010[ 11.901976] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
1011[ 11.908502] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
1012[ 11.915050] init: (Parsing /system/etc/init/installd.rc took 0.00s.)
1013[ 11.921438] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
1014[ 11.927573] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
1015[ 11.934233] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
1016[ 11.940270] init: (Parsing /system/etc/init/logd.rc took 0.00s.)
1017[ 11.946031] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
1018[ 11.952169] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
1019[ 11.958561] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
1020[ 11.965550] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
1021[ 11.972585] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
1022[ 11.978889] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
1023[ 11.985040] init: (Parsing /system/etc/init/netd.rc took 0.00s.)
1024[ 11.991623] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
1025[ 11.997545] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
1026[ 12.003863] init: (Parsing /system/etc/init/rild.rc took 0.00s.)
1027[ 12.009794] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
1028[ 12.016675] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
1029[ 12.023622] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
1030[ 12.029827] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
1031[ 12.035785] init: (Parsing /system/etc/init/vold.rc took 0.00s.)
1032[ 12.048902] EXT4-fs (mmcblk0p23): warning: maximal mount count reached, running e2fsck is recommended
1033[ 12.057832] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1
1034[ 12.072590] EXT4-fs (mmcblk0p22): warning: maximal mount count reached, running e2fsck is recommended
1035[ 12.081529] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1
1036[ 12.099945] EXT4-fs (mmcblk0p27): VFS: Can't find ext4 filesystem
1037[ 12.107654] init: Starting service 'logd'...
1038[ 12.165108] logd.auditd: start
1039[ 12.167168] logd.klogd: 12157074525
1040[ 12.929753] init: (Loading properties from /system/vendor/Default/system/vendor/vendor.prop took 0.00s.)
1041[ 12.938373] init: (Loading properties from /persist/speccfg/vendor_ro.prop took 0.01s.)
1042[ 12.949686] init: (Loading properties from /system/vendor/vendor.prop took 0.00s.)
1043[ 12.957430] init: (Loading properties from /system/vendor/Default/system/vendor/vendor.prop took 0.00s.)
1044[ 12.966005] init: (Loading properties from /persist/speccfg/vendor_persist.prop took 0.01s.)
1045[ 12.975295] init: property_set("ro.telephony.default_network", "22,20") failed
1046[ 12.981744] init: (Loading properties from /system/vendor/default.prop took 0.01s.)
1047[ 12.989206] init: (Loading properties from /system/vendor/power.prop took 0.00s.)
1048[ 12.996684] init: (Loading properties from /system/build.prop took 0.07s.)
1049[ 13.003705] init: (Loading properties from /vendor/build.prop took 0.00s.)
1050[ 13.010431] init: (Loading properties from /factory/factory.prop took 0.00s.)
1051[ 13.017741] init: /recovery not specified in fstab
1052[ 13.023357] init: Starting service 'debuggerd'...
1053[ 13.028097] init: do_start: Service debuggerd64 not found
1054[ 13.035741] init: Starting service 'vold'...
1055[ 13.043448] init: Not bootcharting.
1056[ 13.334413] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
1057[ 13.373337] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 259) exited with status 0
1058[ 13.436888] init: Starting service 'carrier_switcher'...
1059[ 13.443938] init: (Loading properties from /data/local.prop took 0.00s.)
1060[ 13.607298] init: Starting service 'logd-reinit'...
1061[ 13.612903] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
1062[ 13.622973] init: write: cannot expand '${persist.sys.ssr.enable_debug}'
1063[ 13.629602] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
1064[ 13.640618] init: write: cannot expand '${persist.sys.mba_boot_timeout}'
1065[ 13.647225] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
1066[ 13.648007] logd.daemon: reinit
1067[ 13.661719] init: write: cannot expand '${persist.sys.modem_auth_timeout}'
1068[ 13.668698] init: Service 'logd-reinit' (pid 263) exited with status 0
1069[ 13.675137] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
1070[ 13.686144] init: write: cannot expand '${persist.sys.pil_proxy_timeout}'
1071[ 13.696149] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x88000000 to 0x8d300000
1072[ 13.718877] pil-q6v5-mss 4080000.qcom,mss: MBA: loading from 0xaf400000 to 0xaf500000
1073[ 13.771966] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
1074[ 14.574375] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
1075[ 14.650684] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
1076[ 14.651111] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
1077[ 14.651175] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
1078[ 14.652286] memshare: Modem Restart has happened
1079[ 14.652344] M-Notify: General: 7
1080[ 14.652630] init: Service 'carrier_switcher' (pid 260) exited with status 0
1081[ 14.652940] init: Starting service 'exec 2 (/init.qcom.early_boot.sh)'...
1082[ 14.696519] msm8x16-asoc-wcd sound.71: default codec configured
1083[ 14.703906] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
1084[ 14.709629] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
1085[ 14.716682] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
1086[ 14.726797] msm8x16-asoc-wcd sound.71: default codec configured
1087[ 14.740517] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer
1088[ 14.751756] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer
1089[ 14.761453] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
1090[ 14.774357] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer
1091[ 14.786487] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer
1092[ 14.802794] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
1093[ 14.814658] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
1094[ 14.862224] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: mux SLIM_0_RX AANC MUX has no paths
1095[ 14.889700] wcd-spmi-core msm8x16_wcd_codec-12: ASoC: mux RX3 MIX1 INP3 has no paths
1096[ 14.896987] wcd-spmi-core msm8x16_wcd_codec-12: ASoC: mux RX2 MIX1 INP3 has no paths
1097[ 14.928188] init: property_set("ro.opengles.version", "196608") failed
1098[ 15.483496] init: Service 'exec 2 (/init.qcom.early_boot.sh)' (pid 283) exited with status 0
1099[ 15.496344] init: Starting service 'healthd'...
1100[ 15.501772] init: Starting service 'qcom-debug'...
1101[ 15.506473] binder: 319:319 transaction failed 29189, size 0-0
1102[ 15.507196] init: Starting service 'qcom-c_core-sh'...
1103[ 15.508803] init: Starting service 'config_bluetooth'...
1104[ 15.511033] init: Starting service 'qseecomd'...
1105[ 15.513059] init: Starting service 'per_mgr'...
1106[ 15.514993] init: Starting service 'lmkd'...
1107[ 15.517090] init: Starting service 'servicemanager'...
1108[ 15.519259] init: Starting service 'surfaceflinger'...
1109[ 15.569150] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
1110[ 15.580990] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
1111[ 15.590816] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
1112[ 15.601968] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
1113[ 15.611741] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
1114[ 15.624094] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
1115[ 15.634489] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
1116[ 15.650348] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
1117[ 15.659831] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
1118[ 15.690527] init: Service 'qcom-debug' (pid 320) exited with status 0
1119[ 15.696287] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
1120[ 15.713774] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
1121[ 15.724185] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
1122[ 15.734829] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
1123[ 15.748448] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
1124[ 15.758801] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
1125[ 15.760908] warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
1126[ 15.776666] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
1127[ 15.787501] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
1128[ 15.798161] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
1129[ 15.808735] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
1130[ 15.819558] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
1131[ 15.831517] init: Starting service 'rmt_storage'...
1132[ 15.839573] init: insmod: open("/system/lib/modules/adsprpc.ko") failed: No such file or directoryinit: Starting service 'console'...
1133[ 15.854578] enable_store: android_usb: already disabled
1134[ 15.862868] init: Starting service 'adbd'...
1135[ 15.869086] init: Starting service 'ppd'...
1136[ 15.881367] init: Service 'qcom-c_core-sh' (pid 321) exited with status 0
1137[ 15.892027] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 3 (/system/bin/update_verifier)'
1138[ 15.903688] init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'
1139[ 15.915326] init: Starting service 'qcomsysd'...
1140[ 15.922576] init: Starting service 'qcom-c_main-sh'...
1141[ 15.929074] init: Starting service 'cnd'...
1142[ 15.935011] init: Starting service 'irsc_util'...
1143[ 15.944423] init: Starting service 'tftp_server'...
1144[ 15.953460] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time
1145[ 15.972305] init: Starting service 'ptt_socket_app'...
1146[ 15.978521] init: Starting service 'cnss_diag'...
1147[ 15.979243] QSEECOM: qseecom_load_app: App with id 2 (keymaste) now loaded
1148msm8909:/ $ [ 16.010498] handle_qmi_request: Error getting req_desc for msg_id 36
1149[ 16.014616] init: Starting service 'atfwd_quec'...
1150[ 16.016673] init: Starting service 'quecserver'...
1151[ 16.017915] init: cannot find '/system/bin/usb_uicc_client' (No such file or directory), disabling 'usb_uicc_daemon'
1152[ 16.018796] init: Starting service 'bms-sh'...
1153[ 16.030910] init: Starting service 'qcom-usb-sh'...
1154[ 16.032232] init: cannot find '/system/bin/qrngd' (No such file or directory), disabling 'qrngd'
1155[ 16.033325] init: Starting service 'thermal-engine'...
1156[ 16.035562] init: Starting service 'wcnss-service'...
1157[ 16.037539] init: Starting service 'imsstarter'...
1158[ 16.038874] init: cannot find '/system/bin/dts_configurator' (No such file or directory), disabling 'dts_configurator'
1159[ 16.060900] init: Starting service 'zygote'...
1160[ 16.062969] init: Starting service 'audioserver'...
1161[ 16.065101] init: Starting service 'cameraserver'...
1162[ 16.067424] init: Starting service 'drm'...
1163[ 16.069663] init: Starting service 'installd'...
1164[ 16.084239] init: couldn't write 383 to /dev/cpuset/camera-daemon/tasks: No such file or directory
1165[ 16.102370] init: Starting service 'keystore'...
1166[ 16.104679] init: Starting service 'mediacodec'...
1167[ 16.106845] init: Starting service 'mediadrm'...
1168[ 16.108931] init: Starting service 'mediaextractor'...
1169[ 16.131229] mem_share_svc_recv_msg: Error receiving message
1170[ 16.131318] init: Starting service 'media'...
1171[ 16.170808] init: Starting service 'netd'...
1172[ 16.181914] init: Starting service 'ril-daemon'...
1173[ 16.199824] init: Starting service 'dpmd'...
1174[ 16.205525] init: Starting service 'cnss-daemon'...
1175[ 16.219698] init: Starting service 'loc_launcher'...
1176[ 16.227508] init: Starting service 'qcom-sh'...
1177[ 16.235616] init: Service fuse_uicc0 does not have a SELinux domain defined.
1178[ 16.264589] init: Starting service 'RIDL'...
1179[ 16.272992] init: Starting service 'fidodaemon'...
1180[ 16.278894] init: Starting service 'qcamerasvr'...
1181[ 16.298006] init: Starting service 'time_daemon'...
1182[ 16.311598] init: Starting service 'audiod'...
1183[ 16.329629] init: Starting service 'gatekeeperd'...
1184[ 16.386847] devbw qcom,gpubw.23: Governor already resumed!
1185[ 16.391446] devbw qcom,gpubw.23: Unable to resume BW HW mon governor (-16)
1186[ 16.406432] gbam_connect_work: Bam channel is not ready
1187[ 16.586385] healthd: BatteryTechnologyPath not found
1188[ 16.613680] healthd: BatteryFullChargePath not found
1189[ 16.617642] healthd: BatteryCycleCountPath not found
1190[ 16.696683] init: Starting service 'perfprofd'...
1191[ 17.228794] init: Service 'irsc_util' (pid 368) exited with status 0
1192[ 17.300697] init: Service 'cnss_diag' (pid 371) exited with status 255
1193[ 17.451761] init: Starting service 'qmuxd'...
1194[ 17.522046] init: Starting service 'imsqmidaemon'...
1195[ 17.561135] init: Service 'imsstarter' (pid 380) exited with status 0
1196[ 17.753561] init: cannot find '/system/bin/ipacm-diag' (No such file or directory), disabling 'ipacm-diag'
1197[ 17.913037] init: Starting service 'vm_bms'...
1198[ 17.930500] init: Service 'bms-sh' (pid 374) exited with status 0
1199[ 18.024456] init: Starting service 'imsdatadaemon'...
1200[ 18.072891] init: cannot find '/system/bin/ipacm' (No such file or directory), disabling 'ipacm'
1201[ 18.114352] init: Starting service 'bootanim'...
1202[ 18.540954] init: Starting service 'ril-daemon2'...
1203[ 18.622443] init: Starting service 'ims_rtp_daemon'...
1204[ 18.629120] init: Starting service 'imscmservice'...
1205[ 18.796259] init: Starting service 'qti'...
1206[ 19.008479] init: Starting service 'netmgrd'...
1207[ 19.242989] init: Service 'qcom-c_main-sh' (pid 365) exited with status 0
1208[ 19.503902] init: Service 'qcom-usb-sh' (pid 376) exited with status 0
1209[ 19.765521] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
1210[ 19.822433] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
1211[ 19.829340] msm_dolby_dap_param_visualizer_control_get Incorrect VCNB length
1212[ 19.870631] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1213[ 19.877416] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1214[ 19.910402] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1215[ 19.915805] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
1216[ 19.950504] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1217[ 19.955909] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
1218[ 19.995088] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1219[ 20.020423] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1220[ 20.027706] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1221[ 20.060208] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
1222[ 20.068743] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1223[ 20.090206] msm_audio_sound_focus_get: Could not get copp idx for port_id=4103
1224[ 20.096610] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1225[ 20.133187] msm_audio_source_tracking_get: Could not get copp idx for port_id=4103
1226[ 20.190259] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1227[ 20.195679] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
1228[ 20.308120] msm_pcm_volume_ctl_get substream runtime not found
1229[ 20.332789] msm_pcm_volume_ctl_get substream runtime not found
1230[ 20.338525] msm_pcm_volume_ctl_get substream runtime not found
1231[ 20.380534] msm_pcm_volume_ctl_get substream runtime not found
1232[ 20.386415] msm_pcm_volume_ctl_get substream or runtime not found
1233[ 20.411375] msm_pcm_volume_ctl_get substream runtime not found
1234[ 20.664301] tc (601) used greatest stack depth: 5072 bytes left
1235[ 20.814791] wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
1236[ 20.832248] wcdcal_hwdep_ioctl_shared: codec didn't set this 1!!
1237[ 20.837812] wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
1238[ 20.896860] msm_ds2_dap_set_security_control: dmid 0 license key 0
1239[ 20.920222] core_set_license: Invalid cal block to send
1240[ 20.930195] msm_ds2_dap_set_security_control: failed to set dolby license[ 20.937278] wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
1241[ 20.970574] wcdcal_hwdep_ioctl_shared: codec didn't set this 1!!
1242[ 20.975990] wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
1243[ 21.506390] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
1244[ 21.536092] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
1245[ 21.560329] msm_dolby_dap_param_visualizer_control_get Incorrect VCNB length
1246[ 21.570441] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1247[ 21.577095] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1248[ 21.610315] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1249[ 21.616900] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
1250[ 21.630339] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1251[ 21.635669] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
1252[ 21.675408] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1253[ 21.693657] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1254[ 21.715323] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1255[ 21.730179] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
1256[ 21.736495] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1257[ 21.770188] msm_audio_sound_focus_get: Could not get copp idx for port_id=4103
1258[ 21.776505] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1259[ 21.790177] msm_audio_source_tracking_get: Could not get copp idx for port_id=4103
1260[ 21.796858] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1261[ 21.820282] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
1262[ 21.885876] msm_pcm_volume_ctl_get substream runtime not found
1263[ 21.906229] msm_pcm_volume_ctl_get substream runtime not found
1264[ 21.911724] msm_pcm_volume_ctl_get substream runtime not found
1265[ 21.917078] msm_pcm_volume_ctl_get substream runtime not found
1266[ 21.950373] msm_pcm_volume_ctl_get substream or runtime not found
1267[ 21.955997] msm_pcm_volume_ctl_get substream runtime not found
1268[ 21.962397] init: Service 'qcom-sh' (pid 404) exited with status 0
1269[ 22.682004] msm_camera_fill_vreg_params:65 i 2 j 1 cam_vio
1270[ 22.686466] msm_camera_fill_vreg_params:76 i 4 j 2 cam_vana
1271[ 22.695267] msm_camera_fill_vreg_params:76 i 4 j 2 cam_vana
1272[ 22.699817] msm_camera_fill_vreg_params:65 i 6 j 1 cam_vio
1273[ 22.819271] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x37 MSTR_STS:0x0d1300c8 OPER:0x00000010
1274[ 22.834104] msm_sensor_match_id: gc5024: read id failed
1275[ 22.860186] msm_sensor_check_id:1336 match id failed rc -107
1276[ 22.934383] configuring dma source while dma is active
1277[ 23.049916] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x37 MSTR_STS:0x0d1300c8 OPER:0x00000010
1278[ 23.065310] msm_sensor_match_id: gc5024: read id failed
1279[ 23.069889] msm_sensor_check_id:1336 match id failed rc -107
1280[ 23.236582] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x37 MSTR_STS:0x0d1300c8 OPER:0x00000010
1281[ 23.251398] msm_sensor_match_id: gc5024: read id failed
1282[ 23.256695] msm_sensor_check_id:1336 match id failed rc -107
1283[ 23.330173] gc5024 power up failed
1284[ 23.332387] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -107
1285[ 23.379784] msm_isp_close_node: halt timeout rc=0
1286[ 23.847520] init: Service 'RIDL' (pid 405) exited with status 65
1287[ 23.854070] Couldn't get snoc_qosgen
1288[ 24.154636] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
1289[ 24.160713] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
1290[ 24.166762] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
1291[ 24.173607] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
1292[ 24.418427] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
1293[ 24.427816] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
1294[ 24.445609] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
1295[ 24.463713] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
1296[ 24.563878] wcnss: no space available for smd frame
1297[ 24.600374] wcnss: no space available for smd frame
1298[ 24.688998] wcnss: no space available for smd frame
1299[ 24.720330] wcnss: no space available for smd frame
1300[ 24.750293] wcnss: no space available for smd frame
1301[ 24.756727] init: property_set("ro.ril.svlte1x", "false") failed
1302[ 24.772266] init: property_set("ro.ril.svdo", "false") failed
1303[ 24.780312] wcnss: no space available for smd frame
1304[ 25.190361] init: Service 'config_bluetooth' (pid 322) exited with status 0
1305[ 30.726823] HTB: quantum of class 10001 is big. Consider r2q change.
1306[ 30.771775] HTB: quantum of class 10010 is big. Consider r2q change.
1307[ 40.997085] init: Service 'bootanim' (pid 516) exited with status 0
1308[ 41.468955] init: Starting service 'qti-testscripts'...
1309[ 41.481297] init: Starting service 'atfwd'...
1310[ 41.493296] init: Starting service 'dmclient'...
1311[ 41.498452] init: cannot find '/system/bin/qrngp' (No such file or directory), disabling 'qrngp'
1312[ 41.533732] init: Starting service 'exec 4 (/system/bin/bootstat)'...
1313[ 41.556200] type=1400 audit(358.629:4): avc: denied { getattr } for pid=3860 comm="dmclient" path="/vendor" dev="rootfs" ino=3964 scontext=u:r:dmclient:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=0
1314[ 41.617968] init: Service 'qti-testscripts' (pid 3857) exited with status 0
1315[ 41.714965] init: Service 'exec 4 (/system/bin/bootstat)' (pid 3870) exited with status 0
1316[ 41.723528] init: Starting service 'exec 5 (/system/bin/bootstat)'...
1317[ 41.780632] init: Service 'exec 5 (/system/bin/bootstat)' (pid 3877) exited with status 0
1318[ 41.788779] init: Starting service 'exec 6 (/system/bin/bootstat)'...
1319[ 41.863988] init: Service 'exec 6 (/system/bin/bootstat)' (pid 3880) exited with status 0
1320[ 41.872192] init: Starting service 'exec 7 (/system/bin/bootstat)'...
1321[ 41.933953] init: Service 'exec 7 (/system/bin/bootstat)' (pid 3881) exited with status 0
1322[ 41.961351] core_ctl: module license 'BSD' taints kernel.
1323[ 41.965726] Disabling lock debugging due to kernel taint
1324[ 42.857059] init: Starting service 'perfd'...
1325[ 42.873302] init: Service 'qcom-post-boot' (pid 3855) exited with status 0
1326[ 45.822264] type=1400 audit(362.889:5): avc: denied { read } for pid=4186 comm="RenderThread" name="gpuclk" dev="sysfs" ino=10905 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
1327[ 47.603835] init: avc: granted { set } for property=net.lte.ims.data.enabled pid=3530 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
1328[ 101.716096] type=1400 audit(418.789:6): avc: denied { read } for pid=3860 comm="dmclient" name="name" dev="sysfs" ino=10426 scontext=u:r:dmclient:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
1329[ 101.800676] type=1400 audit(418.869:7): avc: denied { search } for pid=3860 comm="dmclient" name="/" dev="mmcblk0p23" ino=2 scontext=u:r:dmclient:s0 tcontext=u:object_r:cache_file:s0 tclass=dir permissive=0