NkCLyfsR

1cpu1 online=1
2cpu2 online=1
3cpu3 online=1
4/tmp/dm.XubfmZq     24:     Device (PCI0)
5Warning  3073 -        Multiple types ^  (Device object requires either a _HID or _ADR, but not both)
6
7/tmp/dm.XubfmZq    799:     Processor (CPU0, 0x00, 0x00000000, 0x00) {}
8Warning  3168 -                          ^ Legacy Processor() keyword detected. Use Device() keyword instead.
9
10[=3h[=3h[=3h[=3hUnable to locate graphics output protocol, graphic disabled: Not Found
11Unable to locate graphics output protocol, graphic disabled: Not Found
12Failed to setup the graphical mode: Not Found
13Failed to setup the graphical mode: Not Found
14kernelflinger-06.04-userdebug
15General block storage identified
16Setting PCI boot device to: Pci(0x3,0x0)/HD(Part1,Sig70D436D2-A946-4472-BA8A-C1A76E2427C0)
17EFI path: \EFI\BOOT\BOOTX64.EFI
18Found 18 block io protocols
19Found disk as block io 0 for logical unit 0
20Found label bootloader in partition 0
21Upgrade file \EFI\BOOT\kernelflinger_new.efi is not exist
22Use simulate RPMB
23Found label boot_a in partition 2
24Found label boot_b in partition 3
25Found label misc in partition 4
26Avb magic 0x0, 0x41, 0x42, 0x30
27Avb magic is right
28wake_source = Invalid wake source (0xFF)
29reset_source = Unknown (0xFF)
30reset_type = Invalid Reset Type (0xFF)
31Bootlogic: Choosing boot target
32Bootlogic: Check osloader command line...
33Bootlogic: Check fastboot sentinel...
34checking ESP for \force_fastboot
35Bootlogic: Check magic key...
36Couldn't read timeout variable; assuming default
37Reset wait time: 200
38Bootlogic: Check watchdog...
39Bootlogic: Check battery insertion...
40Bootlogic: Check BCB...
41Locating BCB
42Found label misc in partition 4
43Reading BCB
44BCB: cmd '' status ''
45Bootlogic: Check reboot target...
46checking LoaderEntryOneShot
47Bootlogic: Check battery level...
48WARNING: charging protocol disabled, assume battery level is above BOOT_OS
49Bootlogic: Check charger insertion...
50Bootlogic: selected 'Android'
51enter clear teedata flag.
52Found label teedata in partition 11
53end clear teedata flag , success
54Found label teedata in partition 11
55Failed to read counter for simulate: Aborted
56Failed to read counter for simulate: Aborted
57key is not programmed, use the first derived key.: Aborted
58key is not programmed, use the first derived key.: Aborted
59Found label teedata in partition 11
60get_counter ret=21, wc=0
61rpmb key is not programmed
62RPMB not programmed
63Found label teedata in partition 11
64rpmb key not provisioned
65Found label teedata in partition 11
66Init RPMB key successfully
67Init RPMB key successfully
68checking device state
69Life Cycle Protocol is not supported
70OEMLock not set, device is not in provisioning mode
71Loading bootloader policy using AVB
72Found label misc in partition 4
73avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
74Found label vbmeta_a in partition 13
75uefi_avb_ops.c:100: ERROR: Could not read from Disk.
76avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
77Failed to get avb slot a/b flow result for boot: Invalid Parameter
78Failed to get avb slot a/b flow result for boot: Invalid Parameter
79Failed to load the boot image using AVB to get bootloader policy: Invalid Parameter
80Failed to load the boot image using AVB to get bootloader policy: Invalid Parame
81ter
82Loading boot image
83Found label misc in partition 4
84avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
85Found label vbmeta_a in partition 13
86uefi_avb_ops.c:100: ERROR: Could not read from Disk.
87avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
88Failed to get avb slot a/b flow result for boot: Invalid Parameter
89Failed to get avb slot a/b flow result for boot: Invalid Parameter
90Unable to locate graphics output protocol, graphic disabled: Not Found
91Unable to locate graphics output protocol, graphic disabled: Not Found
92Failed to setup the graphical mode: Not Found
93Failed to setup the graphical mode: Not Found
94OEM vars may need to be updated
95Setup acpi table
96Install firststage_mount_ssdt, target=0
97firststage_mount_ssdt installed, target=0
98chainloading boot image, boot state is red
99Couldn't load Boot image: Invalid Parameter
100Couldn't load Boot image: Invalid Parameter
101Invalid slot suffix
102Invalid slot suffix
103No active slot
104No active slot
105Failed to write slot failure: Not Found
106Failed to write slot failure: Not Found
107Failed to start boot image: Not Found
108Failed to start boot image: Not Found
109Found label misc in partition 4
110avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
111Found label vbmeta_a in partition 13
112uefi_avb_ops.c:100: ERROR: Could not read from Disk.
113avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
114Unable to locate graphics output protocol, graphic disabled: Not Found
115Unable to locate graphics output protocol, graphic disabled: Not Found
116Failed to setup the graphical mode: Not Found
117Failed to setup the graphical mode: Not Found
118full reset
119passed gvt-g optargs low_gm 64, high_gm 448, fence 8
120SW_LOAD: get ovmf path ./OVMF.fd, size 0x200000
121SW_LOAD: get bootargs root=/dev/vda2 rw rootwait maxcpus=1 nohpet console=tty0 console=hvc0   console=ttyS0 no_timer_check ignore_loglevel log_buf_len=16M   consoleblank=0 tsc=reliable 
122vm_create: vm2
123VHM api version 1.0
124vm_setup_memory: size=0x80000000
125open hugetlbfs file /run/hugepage/acrn/huge_lv1/vm2/495AE2E526034D64AF76D4BC5A8EC0E5
126open hugetlbfs file /run/hugepage/acrn/huge_lv2/vm2/495AE2E526034D64AF76D4BC5A8EC0E5
127level 0 free/need pages:0/1 page size:0x200000
128level 1 free/need pages:2/2 page size:0x40000000
129to reserve more free pages:
130to reserve pages (+orig 0): echo 1 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
131now enough free pages are reserved!
132
133try to setup hugepage with:
134	level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0
135	level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0
136total_size 0x180000000
137
138mmap ptr 0x0x7fe8616ee000 -> baseaddr 0x0x7fe880000000
139mmap 0x80000000@0x7fe880000000
140touch 2 pages with pagesz 0x40000000
141mmap 0x200000@0x7fe97fe00000
142touch 1 pages with pagesz 0x200000
143
144really setup hugepage with:
145	level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0
146	level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0
147vm_init_vdevs
148No correct pm notify channel given
149pci init hostbridge
150pci init lpc
151pci init pci-gvt
152modify_bar_registration: bypass for pci-gvt
153modify_bar_registration: bypass for pci-gvt
154modify_bar_registration: bypass for pci-gvt
155polling 34...
156Listening 34...
157pci init virtio-blk
158pci init virtio-net
159pci init virtio-console
160***********************************************
161virt-console backend redirected to /dev/pts/1
162***********************************************
163tpm: init_vtpm2:Invalid socket path!
164acrn_sw_load
165SW_LOAD: partition blob ./OVMF.fd size 2097152 copy to guest 0xffe00000
166SW_LOAD: build e820 7 entries to addr: 0x7fe8800ef008
167SW_LOAD: entry[0]: addr 0x0000000000000000, size 0x00000000000a0000,  type 0x1
168SW_LOAD: entry[1]: addr 0x00000000000a0000, size 0x0000000000060000,  type 0x2
169SW_LOAD: entry[2]: addr 0x0000000000100000, size 0x000000007ff00000,  type 0x1
170SW_LOAD: entry[3]: addr 0x0000000080000000, size 0x0000000008000000,  type 0x2
171SW_LOAD: entry[4]: addr 0x00000000df000000, size 0x0000000001000000,  type 0x2
172SW_LOAD: entry[5]: addr 0x00000000e0000000, size 0x0000000020000000,  type 0x2
173SW_LOAD: entry[6]: addr 0x0000000100000000, size 0x0000000040000000,  type 0x2
174SW_LOAD: ovmf_entry 0xfffffff0
175add_cpu
176vm mode changed from 0 to 2
177VM loop exit
178pci deinit hostbridge
179pci deinit lpc
180pci deinit pci-gvt
181modify_bar_registration: bypass for pci-gvt
182modify_bar_registration: bypass for pci-gvt
183modify_bar_registration: bypass for pci-gvt
184pci deinit virtio-blk
185pci deinit virtio-net
186vtnet tx thread closing...
187pci deinit virtio-console
188mngr_client_new: Failed to accept from fd 34, err: Invalid argument
189Stop listening 34...
190Stop polling 34...
191No correct pm notify channel given
192vm mode changed from 2 to 0
193vm_create: vm2
194VHM api version 1.0
195vm_setup_memory: size=0x80000000
196open hugetlbfs file /run/hugepage/acrn/huge_lv1/vm2/495AE2E526034D64AF76D4BC5A8EC0E5
197open hugetlbfs file /run/hugepage/acrn/huge_lv2/vm2/495AE2E526034D64AF76D4BC5A8EC0E5
198level 0 free/need pages:1/1 page size:0x200000
199level 1 free/need pages:2/2 page size:0x40000000
200
201try to setup hugepage with:
202	level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0
203	level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0
204total_size 0x180000000
205
206mmap ptr 0x0x7fe8616ee000 -> baseaddr 0x0x7fe880000000
207mmap 0x80000000@0x7fe880000000
208touch 2 pages with pagesz 0x40000000
209mmap 0x200000@0x7fe97fe00000
210touch 1 pages with pagesz 0x200000
211
212really setup hugepage with:
213	level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0
214	level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0
215vm_init_vdevs
216No correct pm notify channel given
217pci init hostbridge
218pci init lpc
219pci init pci-gvt
220modify_bar_registration: bypass for pci-gvt
221modify_bar_registration: bypass for pci-gvt
222modify_bar_registration: bypass for pci-gvt
223polling 34...
224Listening 34...
225pci i/tmp/dm.X4as4Et     24:     Device (PCI0)
226Warning  3073 -        Multiple types ^  (Device object requires either a _HID or _ADR, but not both)
227
228/tmp/dm.X4as4Et    841:     Processor (CPU0, 0x00, 0x00000000, 0x00) {}
229Warning  3168 -                          ^ Legacy Processor() keyword detected. Use Device() keyword instead.
230
231[=3h[=3h[=3h[=3hUnable to locate graphics output protocol, graphic disabled: Not Found
232Unable to locate graphics output protocol, graphic disabled: Not Found
233Failed to setup the graphical mode: Not Found
234Failed to setup the graphical mode: Not Found
235kernelflinger-06.04-userdebug
236General block storage identified
237Setting PCI boot device to: Pci(0x3,0x0)/HD(Part1,Sig70D436D2-A946-4472-BA8A-C1A76E2427C0)
238EFI path: \EFI\BOOT\BOOTX64.EFI
239Found 18 block io protocols
240Found disk as block io 0 for logical unit 0
241Found label bootloader in partition 0
242Upgrade file \EFI\BOOT\kernelflinger_new.efi is not exist
243Use simulate RPMB
244Found label boot_a in partition 2
245Found label boot_b in partition 3
246Found label misc in partition 4
247Avb magic 0x0, 0x41, 0x42, 0x30
248Avb magic is right
249wake_source = Invalid wake source (0xFF)
250reset_source = Unknown (0xFF)
251reset_type = Invalid Reset Type (0xFF)
252Bootlogic: Choosing boot target
253Bootlogic: Check osloader command line...
254Bootlogic: Check fastboot sentinel...
255checking ESP for \force_fastboot
256Bootlogic: Check magic key...
257Couldn't read timeout variable; assuming default
258Reset wait time: 200
259Bootlogic: Check watchdog...
260Bootlogic: Check battery insertion...
261Bootlogic: Check BCB...
262Locating BCB
263Found label misc in partition 4
264Reading BCB
265BCB: cmd '' status ''
266Bootlogic: Check reboot target...
267checking LoaderEntryOneShot
268Bootlogic: Check battery level...
269WARNING: charging protocol disabled, assume battery level is above BOOT_OS
270Bootlogic: Check charger insertion...
271Bootlogic: selected 'Android'
272enter clear teedata flag.
273Found label teedata in partition 11
274end clear teedata flag , success
275Found label teedata in partition 11
276Failed to read counter for simulate: Aborted
277Failed to read counter for simulate: Aborted
278key is not programmed, use the first derived key.: Aborted
279key is not programmed, use the first derived key.: Aborted
280Found label teedata in partition 11
281get_counter ret=21, wc=0
282rpmb key is not programmed
283RPMB not programmed
284Found label teedata in partition 11
285rpmb key not provisioned
286Found label teedata in partition 11
287Init RPMB key successfully
288Init RPMB key successfully
289checking device state
290Life Cycle Protocol is not supported
291OEMLock not set, device is not in provisioning mode
292Loading bootloader policy using AVB
293Found label misc in partition 4
294avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
295Found label vbmeta_a in partition 13
296uefi_avb_ops.c:100: ERROR: Could not read from Disk.
297avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
298Failed to get avb slot a/b flow result for boot: Invalid Parameter
299Failed to get avb slot a/b flow result for boot: Invalid Parameter
300Failed to load the boot image using AVB to get bootloader policy: Invalid Parameter
301Failed to load the boot image using AVB to get bootloader policy: Invalid Parame
302ter
303Loading boot image
304Found label misc in partition 4
305avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
306Found label vbmeta_a in partition 13
307uefi_avb_ops.c:100: ERROR: Could not read from Disk.
308avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
309Failed to get avb slot a/b flow result for boot: Invalid Parameter
310Failed to get avb slot a/b flow result for boot: Invalid Parameter
311Unable to locate graphics output protocol, graphic disabled: Not Found
312Unable to locate graphics output protocol, graphic disabled: Not Found
313Failed to setup the graphical mode: Not Found
314Failed to setup the graphical mode: Not Found
315OEM vars may need to be updated
316Setup acpi table
317Install firststage_mount_ssdt, target=0
318firststage_mount_ssdt installed, target=0
319chainloading boot image, boot state is red
320Couldn't load Boot image: Invalid Parameter
321Couldn't load Boot image: Invalid Parameter
322Invalid slot suffix
323Invalid slot suffix
324No active slot
325No active slot
326Failed to write slot failure: Not Found
327Failed to write slot failure: Not Found
328Failed to start boot image: Not Found
329Failed to start boot image: Not Found
330Found label misc in partition 4
331avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
332Found label vbmeta_a in partition 13
333uefi_avb_ops.c:100: ERROR: Could not read from Disk.
334avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
335Unable to locate graphics output protocol, graphic disabled: Not Found
336Unable to locate graphics output protocol, graphic disabled: Not Found
337Failed to setup the graphical mode: Not Found
338Failed to setup the graphical mode: Not Found
339full reset
340/tmp/dm.X1N424p     24:     Device (PCI0)
341Warning  3073 -        Multiple types ^  (Device object requires either a _HID or _ADR, but not both)
342
343/tmp/dm.X1N424p    841:     Processor (CPU0, 0x00, 0x00000000, 0x00) {}
344Warning  3168 -                          ^ Legacy Processor() keyword detected. Use Device() keyword instead.
345
346[=3h[=3h[=3h[=3hUnable to locate graphics output protocol, graphic disabled: Not Found
347Unable to locate graphics output protocol, graphic disabled: Not Found
348Failed to setup the graphical mode: Not Found
349Failed to setup the graphical mode: Not Found
350kernelflinger-06.04-userdebug
351General block storage identified
352Setting PCI boot device to: Pci(0x3,0x0)/HD(Part1,Sig70D436D2-A946-4472-BA8A-C1A76E2427C0)
353EFI path: \EFI\BOOT\BOOTX64.EFI
354Found 18 block io protocols
355Found disk as block io 0 for logical unit 0
356Found label bootloader in partition 0
357Upgrade file \EFI\BOOT\kernelflinger_new.efi is not exist
358Use simulate RPMB
359Found label boot_a in partition 2
360Found label boot_b in partition 3
361Found label misc in partition 4
362Avb magic 0x0, 0x41, 0x42, 0x30
363Avb magic is right
364wake_source = Invalid wake source (0xFF)
365reset_source = Unknown (0xFF)
366reset_type = Invalid Reset Type (0xFF)
367Bootlogic: Choosing boot target
368Bootlogic: Check osloader command line...
369Bootlogic: Check fastboot sentinel...
370checking ESP for \force_fastboot
371Bootlogic: Check magic key...
372Couldn't read timeout variable; assuming default
373Reset wait time: 200
374Bootlogic: Check watchdog...
375Bootlogic: Check battery insertion...
376Bootlogic: Check BCB...
377Locating BCB
378Found label misc in partition 4
379Reading BCB
380BCB: cmd '' status ''
381Bootlogic: Check reboot target...
382checking LoaderEntryOneShot
383Bootlogic: Check battery level...
384WARNING: charging protocol disabled, assume battery level is above BOOT_OS
385Bootlogic: Check charger insertion...
386Bootlogic: selected 'Android'
387enter clear teedata flag.
388Found label teedata in partition 11
389end clear teedata flag , success
390Found label teedata in partition 11
391Failed to read counter for simulate: Aborted
392Failed to read counter for simulate: Aborted
393key is not programmed, use the first derived key.: Aborted
394key is not programmed, use the first derived key.: Aborted
395Found label teedata in partition 11
396get_counter ret=21, wc=0
397rpmb key is not programmed
398RPMB not programmed
399Found label teedata in partition 11
400rpmb key not provisioned
401Found label teedata in partition 11
402Init RPMB key successfully
403Init RPMB key successfully
404checking device state
405Life Cycle Protocol is not supported
406OEMLock not set, device is not in provisioning mode
407Loading bootloader policy using AVB
408Found label misc in partition 4
409avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
410Found label vbmeta_a in partition 13
411uefi_avb_ops.c:100: ERROR: Could not read from Disk.
412avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
413Failed to get avb slot a/b flow result for boot: Invalid Parameter
414Failed to get avb slot a/b flow result for boot: Invalid Parameter
415Failed to load the boot image using AVB to get bootloader policy: Invalid Parameter
416Failed to load the boot image using AVB to get bootloader policy: Invalid Parame
417ter
418Loading boot image
419Found label misc in partition 4
420avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
421Found label vbmeta_a in partition 13
422uefi_avb_ops.c:100: ERROR: Could not read from Disk.
423avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
424Failed to get avb slot a/b flow result for boot: Invalid Parameter
425Failed to get avb slot a/b flow result for boot: Invalid Parameter
426Unable to locate graphics output protocol, graphic disabled: Not Found
427Unable to locate graphics output protocol, graphic disabled: Not Found
428Failed to setup the graphical mode: Not Found
429Failed to setup the graphical mode: Not Found
430OEM vars may need to be updated
431Setup acpi table
432Install firststage_mount_ssdt, target=0
433firststage_mount_ssdt installed, target=0
434chainloading boot image, boot state is red
435Couldn't load Boot image: Invalid Parameter
436Couldn't load Boot image: Invalid Parameter
437Invalid slot suffix
438Invalid slot suffix
439No active slot
440No active slot
441Failed to write slot failure: Not Found
442Failed to write slot failure: Not Found
443Failed to start boot image: Not Found
444Failed to start boot image: Not Found
445Found label misc in partition 4
446avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
447Found label vbmeta_a in partition 13
448uefi_avb_ops.c:100: ERROR: Could not read from Disk.
449avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
450Unable to locate graphics output protocol, graphic disabled: Not Found
451Unable to locate graphics output protocol, graphic disabled: Not Found
452Failed to setup the graphical mode: Not Found
453Failed to setup the graphical mode: Not Found
454full reset
455nit virtio-blk
456pci init virtio-net
457pci init virtio-console
458***********************************************
459virt-console backend redirected to /dev/pts/1
460***********************************************
461tpm: init_vtpm2:Invalid socket path!
462acrn_sw_load
463SW_LOAD: partition blob ./OVMF.fd size 2097152 copy to guest 0xffe00000
464SW_LOAD: build e820 7 entries to addr: 0x7fe8800ef008
465SW_LOAD: entry[0]: addr 0x0000000000000000, size 0x00000000000a0000,  type 0x1
466SW_LOAD: entry[1]: addr 0x00000000000a0000, size 0x0000000000060000,  type 0x2
467SW_LOAD: entry[2]: addr 0x0000000000100000, size 0x000000007ff00000,  type 0x1
468SW_LOAD: entry[3]: addr 0x0000000080000000, size 0x0000000008000000,  type 0x2
469SW_LOAD: entry[4]: addr 0x00000000df000000, size 0x0000000001000000,  type 0x2
470SW_LOAD: entry[5]: addr 0x00000000e0000000, size 0x0000000020000000,  type 0x2
471SW_LOAD: entry[6]: addr 0x0000000100000000, size 0x0000000040000000,  type 0x2
472SW_LOAD: ovmf_entry 0xfffffff0
473add_cpu
474vm mode changed from 0 to 2
475VM loop exit
476pci deinit hostbridge
477pci deinit lpc
478pci deinit pci-gvt
479modify_bar_registration: bypass for pci-gvt
480modify_bar_registration: bypass for pci-gvt
481modify_bar_registration: bypass for pci-gvt
482pci deinit virtio-blk
483pci deinit virtio-net
484vtnet tx thread closing...
485pci deinit virtio-console
486mngr_client_new: Failed to accept from fd 34, err: Invalid argument
487Stop listening 34...
488Stop polling 34...
489No correct pm notify channel given
490vm mode changed from 2 to 0
491vm_create: vm2
492VHM api version 1.0
493vm_setup_memory: size=0x80000000
494open hugetlbfs file /run/hugepage/acrn/huge_lv1/vm2/495AE2E526034D64AF76D4BC5A8EC0E5
495open hugetlbfs file /run/hugepage/acrn/huge_lv2/vm2/495AE2E526034D64AF76D4BC5A8EC0E5
496level 0 free/need pages:1/1 page size:0x200000
497level 1 free/need pages:2/2 page size:0x40000000
498
499try to setup hugepage with:
500	level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0
501	level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0
502total_size 0x180000000
503
504mmap ptr 0x0x7fe8616ee000 -> baseaddr 0x0x7fe880000000
505mmap 0x80000000@0x7fe880000000
506touch 2 pages with pagesz 0x40000000
507mmap 0x200000@0x7fe97fe00000
508touch 1 pages with pagesz 0x200000
509
510really setup hugepage with:
511	level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0
512	level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0
513vm_init_vdevs
514No correct pm notify channel given
515polling 34...
516pci init hostbridge
517pci init lpc
518pci init pci-gvt
519modify_bar_registration: bypass for pci-gvt
520modify_bar_registration: bypass for pci-gvt
521modify_bar_registration: bypass for pci-gvt
522Listening 34...
523pci init virtio-blk
524pci init virtio-net
525pci init virtio-console
526***********************************************
527virt-console backend redirected to /dev/pts/1
528***********************************************
529tpm: init_vtpm2:Invalid socket path!
530acrn_sw_load
531SW_LOAD: partition blob ./OVMF.fd size 2097152 copy to guest 0xffe00000
532SW_LOAD: build e820 7 entries to addr: 0x7fe8800ef008
533SW_LOAD: entry[0]: addr 0x0000000000000000, size 0x00000000000a0000,  type 0x1
534SW_LOAD: entry[1]: addr 0x00000000000a0000, size 0x0000000000060000,  type 0x2
535SW_LOAD: entry[2]: addr 0x0000000000100000, size 0x000000007ff00000,  type 0x1
536SW_LOAD: entry[3]: addr 0x0000000080000000, size 0x0000000008000000,  type 0x2
537SW_LOAD: entry[4]: addr 0x00000000df000000, size 0x0000000001000000,  type 0x2
538SW_LOAD: entry[5]: addr 0x00000000e0000000, size 0x0000000020000000,  type 0x2
539SW_LOAD: entry[6]: addr 0x0000000100000000, size 0x0000000040000000,  type 0x2
540SW_LOAD: ovmf_entry 0xfffffff0
541add_cpu
542vm mode changed from 0 to 2
543VM loop exit
544pci deinit hostbridge
545pci deinit lpc
546pci deinit pci-gvt
547modify_bar_registration: bypass for pci-gvt
548modify_bar_registration: bypass for pci-gvt
549modify_bar_registration: bypass for pci-gvt
550pci deinit virtio-blk
551pci deinit virtio-net
552vtnet tx thread closing...
553pci deinit virtio-console
554mngr_client_new: Failed to accept from fd 34, err: Invalid argument
555Stop listening 34...
556Stop polling 34...
557No correct pm notify channel given
558vm mode changed from 2 to 0
559vm_create: vm2
560VHM api version 1.0
561vm_setup_memory: si/tmp/dm.XlqVGcq     24:     Device (PCI0)
562Warning  3073 -        Multiple types ^  (Device object requires either a _HID or _ADR, but not both)
563
564/tmp/dm.XlqVGcq    841:     Processor (CPU0, 0x00, 0x00000000, 0x00) {}
565Warning  3168 -                          ^ Legacy Processor() keyword detected. Use Device() keyword instead.
566
567[=3h[=3h[=3h[=3hUnable to locate graphics output protocol, graphic disabled: Not Found
568Unable to locate graphics output protocol, graphic disabled: Not Found
569Failed to setup the graphical mode: Not Found
570Failed to setup the graphical mode: Not Found
571kernelflinger-06.04-userdebug
572General block storage identified
573Setting PCI boot device to: Pci(0x3,0x0)/HD(Part1,Sig70D436D2-A946-4472-BA8A-C1A76E2427C0)
574EFI path: \EFI\BOOT\BOOTX64.EFI
575Found 18 block io protocols
576Found disk as block io 0 for logical unit 0
577Found label bootloader in partition 0
578Upgrade file \EFI\BOOT\kernelflinger_new.efi is not exist
579Use simulate RPMB
580Found label boot_a in partition 2
581Found label boot_b in partition 3
582Found label misc in partition 4
583Avb magic 0x0, 0x41, 0x42, 0x30
584Avb magic is right
585wake_source = Invalid wake source (0xFF)
586reset_source = Unknown (0xFF)
587reset_type = Invalid Reset Type (0xFF)
588Bootlogic: Choosing boot target
589Bootlogic: Check osloader command line...
590Bootlogic: Check fastboot sentinel...
591checking ESP for \force_fastboot
592Bootlogic: Check magic key...
593Couldn't read timeout variable; assuming default
594Reset wait time: 200
595Bootlogic: Check watchdog...
596Bootlogic: Check battery insertion...
597Bootlogic: Check BCB...
598Locating BCB
599Found label misc in partition 4
600Reading BCB
601BCB: cmd '' status ''
602Bootlogic: Check reboot target...
603checking LoaderEntryOneShot
604Bootlogic: Check battery level...
605WARNING: charging protocol disabled, assume battery level is above BOOT_OS
606Bootlogic: Check charger insertion...
607Bootlogic: selected 'Android'
608enter clear teedata flag.
609Found label teedata in partition 11
610end clear teedata flag , success
611Found label teedata in partition 11
612Failed to read counter for simulate: Aborted
613Failed to read counter for simulate: Aborted
614key is not programmed, use the first derived key.: Aborted
615key is not programmed, use the first derived key.: Aborted
616Found label teedata in partition 11
617get_counter ret=21, wc=0
618rpmb key is not programmed
619RPMB not programmed
620Found label teedata in partition 11
621rpmb key not provisioned
622Found label teedata in partition 11
623Init RPMB key successfully
624Init RPMB key successfully
625checking device state
626Life Cycle Protocol is not supported
627OEMLock not set, device is not in provisioning mode
628Loading bootloader policy using AVB
629Found label misc in partition 4
630avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
631Found label vbmeta_a in partition 13
632uefi_avb_ops.c:100: ERROR: Could not read from Disk.
633avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
634Failed to get avb slot a/b flow result for boot: Invalid Parameter
635Failed to get avb slot a/b flow result for boot: Invalid Parameter
636Failed to load the boot image using AVB to get bootloader policy: Invalid Parameter
637Failed to load the boot image using AVB to get bootloader policy: Invalid Parame
638ter
639Loading boot image
640Found label misc in partition 4
641avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
642Found label vbmeta_a in partition 13
643uefi_avb_ops.c:100: ERROR: Could not read from Disk.
644avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
645Failed to get avb slot a/b flow result for boot: Invalid Parameter
646Failed to get avb slot a/b flow result for boot: Invalid Parameter
647Unable to locate graphics output protocol, graphic disabled: Not Found
648Unable to locate graphics output protocol, graphic disabled: Not Found
649Failed to setup the graphical mode: Not Found
650Failed to setup the graphical mode: Not Found
651OEM vars may need to be updated
652Setup acpi table
653Install firststage_mount_ssdt, target=0
654firststage_mount_ssdt installed, target=0
655chainloading boot image, boot state is red
656Couldn't load Boot image: Invalid Parameter
657Couldn't load Boot image: Invalid Parameter
658Invalid slot suffix
659Invalid slot suffix
660No active slot
661No active slot
662Failed to write slot failure: Not Found
663Failed to write slot failure: Not Found
664Failed to start boot image: Not Found
665Failed to start boot image: Not Found
666Found label misc in partition 4
667avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
668Found label vbmeta_a in partition 13
669uefi_avb_ops.c:100: ERROR: Could not read from Disk.
670avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
671Unable to locate graphics output protocol, graphic disabled: Not Found
672Unable to locate graphics output protocol, graphic disabled: Not Found
673Failed to setup the graphical mode: Not Found
674Failed to setup the graphical mode: Not Found
675full reset
676/tmp/dm.XMJDxiu     24:     Device (PCI0)
677Warning  3073 -        Multiple types ^  (Device object requires either a _HID or _ADR, but not both)
678
679/tmp/dm.XMJDxiu    841:     Processor (CPU0, 0x00, 0x00000000, 0x00) {}
680Warning  3168 -                          ^ Legacy Processor() keyword detected. Use Device() keyword instead.
681
682ze=0x80000000
683open hugetlbfs file /run/hugepage/acrn/huge_lv1/vm2/495AE2E526034D64AF76D4BC5A8EC0E5
684open hugetlbfs file /run/hugepage/acrn/huge_lv2/vm2/495AE2E526034D64AF76D4BC5A8EC0E5
685level 0 free/need pages:1/1 page size:0x200000
686level 1 free/need pages:2/2 page size:0x40000000
687
688try to setup hugepage with:
689	level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0
690	level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0
691total_size 0x180000000
692
693mmap ptr 0x0x7fe8616ee000 -> baseaddr 0x0x7fe880000000
694mmap 0x80000000@0x7fe880000000
695touch 2 pages with pagesz 0x40000000
696mmap 0x200000@0x7fe97fe00000
697touch 1 pages with pagesz 0x200000
698
699really setup hugepage with:
700	level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0
701	level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0
702vm_init_vdevs
703No correct pm notify channel given
704polling 34...
705pci init hostbridge
706pci init lpc
707pci init pci-gvt
708modify_bar_registration: bypass for pci-gvt
709modify_bar_registration: bypass for pci-gvt
710modify_bar_registration: bypass for pci-gvt
711Listening 34...
712pci init virtio-blk
713pci init virtio-net
714pci init virtio-console
715***********************************************
716virt-console backend redirected to /dev/pts/1
717***********************************************
718tpm: init_vtpm2:Invalid socket path!
719acrn_sw_load
720SW_LOAD: partition blob ./OVMF.fd size 2097152 copy to guest 0xffe00000
721SW_LOAD: build e820 7 entries to addr: 0x7fe8800ef008
722SW_LOAD: entry[0]: addr 0x0000000000000000, size 0x00000000000a0000,  type 0x1
723SW_LOAD: entry[1]: addr 0x00000000000a0000, size 0x0000000000060000,  type 0x2
724SW_LOAD: entry[2]: addr 0x0000000000100000, size 0x000000007ff00000,  type 0x1
725SW_LOAD: entry[3]: addr 0x0000000080000000, size 0x0000000008000000,  type 0x2
726SW_LOAD: entry[4]: addr 0x00000000df000000, size 0x0000000001000000,  type 0x2
727SW_LOAD: entry[5]: addr 0x00000000e0000000, size 0x0000000020000000,  type 0x2
728SW_LOAD: entry[6]: addr 0x0000000100000000, size 0x0000000040000000,  type 0x2
729SW_LOAD: ovmf_entry 0xfffffff0
730add_cpu
731vm mode changed from 0 to 2
732VM loop exit
733pci deinit hostbridge
734pci deinit lpc
735pci deinit pci-gvt
736modify_bar_registration: bypass for pci-gvt
737modify_bar_registration: bypass for pci-gvt
738modify_bar_registration: bypass for pci-gvt
739pci deinit virtio-blk
740pci deinit virtio-net
741vtnet tx thread closing...
742pci deinit virtio-console
743mngr_client_new: Failed to accept from fd 34, err: Invalid argument
744Stop listening 34...
745Stop polling 34...
746No correct pm notify channel given
747vm mode changed from 2 to 0
748vm_create: vm2
749VHM api version 1.0
750vm_setup_memory: size=0x80000000
751open hugetlbfs file /run/hugepage/acrn/huge_lv1/vm2/495AE2E526034D64AF76D4BC5A8EC0E5
752open hugetlbfs file /run/hugepage/acrn/huge_lv2/vm2/495AE2E526034D64AF76D4BC5A8EC0E5
753level 0 free/need pages:1/1 page size:0x200000
754level 1 free/need pages:2/2 page size:0x40000000
755
756try to setup hugepage with:
757	level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0
758	level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0
759total_size 0x180000000
760
761mmap ptr 0x0x7fe8616ee000 -> baseaddr 0x0x7fe880000000
762mmap 0x80000000@0x7fe880000000
763touch 2 pages with pagesz 0x40000000
764mmap 0x200000@0x7fe97fe00000
765touch 1 pages with pagesz 0x200000
766
767really setup hugepage with:
768	level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0
769	level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0
770vm_init_vdevs
771No correct pm notify channel given
772polling 34...
773pci init hostbridge
774pci init lpc
775pci init pci-gvt
776modify_bar_registration: bypass for pci-gvt
777modify_bar_registration: bypass for pci-gvt
778modify_bar_registration: bypass for pci-gvt
779Listening 34...
780pci init virtio-blk
781pci init virtio-net
782pci init virtio-console
783***********************************************
784virt-console backend redirected to /dev/pts/1
785***********************************************
786tpm: init_vtpm2:Invalid socket path!
787acrn_sw_load
788SW_LOAD: partition blob ./OVMF.fd size 2097152 copy to guest 0xffe00000
789SW_LOAD: build e820 7 entries to addr: 0x7fe8800ef008
790SW_LOAD: entry[0]: addr 0x0000000000000000, size 0x00000000000a0000,  type 0x1
791SW_LOAD: entry[1]: addr 0x0000000000[=3h[=3h[=3h[=3hUnable to locate graphics output protocol, graphic disabled: Not Found
792Unable to locate graphics output protocol, graphic disabled: Not Found
793Failed to setup the graphical mode: Not Found
794Failed to setup the graphical mode: Not Found
795kernelflinger-06.04-userdebug
796General block storage identified
797Setting PCI boot device to: Pci(0x3,0x0)/HD(Part1,Sig70D436D2-A946-4472-BA8A-C1A76E2427C0)
798EFI path: \EFI\BOOT\BOOTX64.EFI
799Found 18 block io protocols
800Found disk as block io 0 for logical unit 0
801Found label bootloader in partition 0
802Upgrade file \EFI\BOOT\kernelflinger_new.efi is not exist
803Use simulate RPMB
804Found label boot_a in partition 2
805Found label boot_b in partition 3
806Found label misc in partition 4
807Avb magic 0x0, 0x41, 0x42, 0x30
808Avb magic is right
809wake_source = Invalid wake source (0xFF)
810reset_source = Unknown (0xFF)
811reset_type = Invalid Reset Type (0xFF)
812Bootlogic: Choosing boot target
813Bootlogic: Check osloader command line...
814Bootlogic: Check fastboot sentinel...
815checking ESP for \force_fastboot
816Bootlogic: Check magic key...
817Couldn't read timeout variable; assuming default
818Reset wait time: 200
819Bootlogic: Check watchdog...
820Bootlogic: Check battery insertion...
821Bootlogic: Check BCB...
822Locating BCB
823Found label misc in partition 4
824Reading BCB
825BCB: cmd '' status ''
826Bootlogic: Check reboot target...
827checking LoaderEntryOneShot
828Bootlogic: Check battery level...
829WARNING: charging protocol disabled, assume battery level is above BOOT_OS
830Bootlogic: Check charger insertion...
831Bootlogic: selected 'Android'
832enter clear teedata flag.
833Found label teedata in partition 11
834end clear teedata flag , success
835Found label teedata in partition 11
836Failed to read counter for simulate: Aborted
837Failed to read counter for simulate: Aborted
838key is not programmed, use the first derived key.: Aborted
839key is not programmed, use the first derived key.: Aborted
840Found label teedata in partition 11
841get_counter ret=21, wc=0
842rpmb key is not programmed
843RPMB not programmed
844Found label teedata in partition 11
845rpmb key not provisioned
846Found label teedata in partition 11
847Init RPMB key successfully
848Init RPMB key successfully
849checking device state
850Life Cycle Protocol is not supported
851OEMLock not set, device is not in provisioning mode
852Loading bootloader policy using AVB
853Found label misc in partition 4
854avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
855Found label vbmeta_a in partition 13
856uefi_avb_ops.c:100: ERROR: Could not read from Disk.
857avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
858Failed to get avb slot a/b flow result for boot: Invalid Parameter
859Failed to get avb slot a/b flow result for boot: Invalid Parameter
860Failed to load the boot image using AVB to get bootloader policy: Invalid Parameter
861Failed to load the boot image using AVB to get bootloader policy: Invalid Parame
862ter
863Loading boot image
864Found label misc in partition 4
865avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
866Found label vbmeta_a in partition 13
867uefi_avb_ops.c:100: ERROR: Could not read from Disk.
868avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
869Failed to get avb slot a/b flow result for boot: Invalid Parameter
870Failed to get avb slot a/b flow result for boot: Invalid Parameter
871Unable to locate graphics output protocol, graphic disabled: Not Found
872Unable to locate graphics output protocol, graphic disabled: Not Found
873Failed to setup the graphical mode: Not Found
874Failed to setup the graphical mode: Not Found
875OEM vars may need to be updated
876Setup acpi table
877Install firststage_mount_ssdt, target=0
878firststage_mount_ssdt installed, target=0
879chainloading boot image, boot state is red
880Couldn't load Boot image: Invalid Parameter
881Couldn't load Boot image: Invalid Parameter
882Invalid slot suffix
883Invalid slot suffix
884No active slot
885No active slot
886Failed to write slot failure: Not Found
887Failed to write slot failure: Not Found
888Failed to start boot image: Not Found
889Failed to start boot image: Not Found
890Found label misc in partition 4
891avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
892Found label vbmeta_a in partition 13
893uefi_avb_ops.c:100: ERROR: Could not read from Disk.
894avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
895Unable to locate graphics output protocol, graphic disabled: Not Found
896Unable to locate graphics output protocol, graphic disabled: Not Found
897Failed to setup the graphical mode: Not Found
898Failed to setup the graphical mode: Not Found
899full reset
900/tmp/dm.XG3aPmq     24:     Device (PCI0)
901Warning  3073 -        Multiple types ^  (Device object requires either a _HID or _ADR, but not both)
902
903/tmp/dm.XG3aPmq    841:     Processor (CPU0, 0x00, 0x00000000, 0x00) {}
904Warning  3168 -                          ^ Legacy Processor() keyword detected. Use Device() keyword instead.
905
906[=3h[=3h[=3h[=3hUnable to locate graphics output protocol, graphic disabled: Not Found
907Unable to locate graphics output protocol, graphic disabled: Not Found
908Failed to setup the graphical mode: Not Found
909Failed to setup the graphical mode: Not Found
910kernelflinger-06.04-userdebug
911General block storage identified
912Setting PCI boot device to: Pci(0x3,0x0)/HD(Part1,Sig70D436D2-A946-4472-BA8A-C1A76E2427C0)
913EFI path: \EFI\BOOT\BOOTX64.EFI
914Found 18 block io protocols
915Found disk as block io 0 for logical unit 0
916Found label bootloader in partition 0
917Upgrade file \EFI\BOOT\kernelflinger_new.efi is not exist
918Use simulate RPMB
919Found label boot_a in partition 2
920Found label boot_b in partition 3
921Found label misc in partition 4
922Avb magic 0x0, 0x41, 0x42, 0x30
923Avb magic is right
924wake_source = Invalid wake source (0xFF)
925reset_source = Unknown (0xFF)
926reset_type = Invalid Reset Type (0xFF)
927Bootlogic: Choosing boot target
928Bootlogic: Check osloader command line...
929Bootlogic: Check fastboot sentinel...
930checking ESP for \force_fastboot
931Bootlogic: Check magic key...
932Couldn't read timeout variable; assuming default
933Reset wait time: 200
934Bootlogic: Check watchdog...
935Bootlogic: Check battery insertion...
936Bootlogic: Check BCB...
937Locating BCB
938Found label misc in partition 4
939Reading BCB
940BCB: cmd '' status ''
941Bootlogic: Check reboot target...
942checking LoaderEntryOneShot
943Bootlogic: Check battery level...
944WARNING: charging protocol disabled, assume battery level is above BOOT_OS
945Bootlogic: Check charger insertion...
946Bootlogic: selected 'Android'
947enter clear teedata flag.
948Found label teedata in partition 11
949end clear teedata flag , success
950Found label teedata in partition 11
951Failed to read counter for simulate: Aborted
952Failed to read counter for simulate: Aborted
953key is not programmed, use the first derived key.: Aborted
954key is not programmed, use the first derived key.: Aborted
955Found label teedata in partition 11
956get_counter ret=21, wc=0
957rpmb key is not programmed
958RPMB not programmed
959Found label teedata in partition 11
960rpmb key not provisioned
961Found label teedata in partition 11
962Init RPMB key successfully
963Init RPMB key successfully
964checking device state
965Life Cycle Protocol is not supported
966OEMLock not set, device is not in provisioning mode
967Loading bootloader policy using AVB
968Found label misc in partition 4
969avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
970Found label vbmeta_a in partition 13
971uefi_avb_ops.c:100: ERROR: Could not read from Disk.
972avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
973Failed to get avb slot a/b flow result for boot: Invalid Parameter
974Failed to get avb slot a/b flow result for boot: Invalid Parameter
975Failed to load the boot image using AVB to get bootloader policy: Invalid Parameter
976Failed to load the boot image using AVB to get bootloader policy: Invalid Parame
977ter
978Loading boot image
979Found label misc in partition 4
980avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
981Found label vbmeta_a in partition 13
982uefi_avb_ops.c:100: ERROR: Could not read from Disk.
983avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
984Failed to get avb slot a/b flow result for boot: Invalid Parameter
985Failed to get avb slot a/b flow result for boot: Invalid Parameter
986Unable to locate graphics output protocol, graphic disabled: Not Found
987Unable to locate graphics output protocol, graphic disabled: Not Found
988Failed to setup the graphical mode: Not Found
989Failed to setup the graphical mode: Not Found
990OEM vars may need to be updated
991Setup acpi table
992Install firststage_mount_ssdt, target=0
993firststage_mount_ssdt installed, target=0
994chainloading boot image, boot state is red
995Couldn't load Boot image: Invalid Parameter
996Couldn't load Boot image: Invalid Parameter
997Invalid slot suffix
998Invalid slot suffix
999No active slot
1000No active slot
1001Failed to write slot failure: Not Found
1002Failed to write slot failure: Not Found
1003Failed to start boot image: Not Found
1004Failed to start boot image: Not Found
1005Found label misc in partition 4
1006avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta_a'.
1007Found label vbmeta_a in partition 13
1008uefi_avb_ops.c:100: ERROR: Could not read from Disk.
1009avb_slot_verify.c:612: ERROR: vbmeta_a: Error loading vbmeta data.
1010Unable to locate graphics output protocol, graphic disabled: Not Found
1011Unable to locate graphics output protocol, graphic disabled: Not Found
1012Failed to setup the graphical mode: Not Found
1013Failed to setup the graphical mode: Not Found
1014full reset
10150a0000, size 0x0000000000060000,  type 0x2
1016SW_LOAD: entry[2]: addr 0x0000000000100000, size 0x000000007ff00000,  type 0x1
1017SW_LOAD: entry[3]: addr 0x0000000080000000, size 0x0000000008000000,  type 0x2
1018SW_LOAD: entry[4]: addr 0x00000000df000000, size 0x0000000001000000,  type 0x2
1019SW_LOAD: entry[5]: addr 0x00000000e0000000, size 0x0000000020000000,  type 0x2
1020SW_LOAD: entry[6]: addr 0x0000000100000000, size 0x0000000040000000,  type 0x2
1021SW_LOAD: ovmf_entry 0xfffffff0
1022add_cpu
1023vm mode changed from 0 to 2
1024VM loop exit
1025pci deinit hostbridge
1026pci deinit lpc
1027pci deinit pci-gvt
1028modify_bar_registration: bypass for pci-gvt
1029modify_bar_registration: bypass for pci-gvt
1030modify_bar_registration: bypass for pci-gvt
1031pci deinit virtio-blk
1032pci deinit virtio-net
1033vtnet tx thread closing...
1034pci deinit virtio-console
1035mngr_client_new: Failed to accept from fd 34, err: Invalid argument
1036Stop listening 34...
1037Stop polling 34...
1038No correct pm notify channel given
1039vm mode changed from 2 to 0
1040vm_create: vm2
1041VHM api version 1.0
1042vm_setup_memory: size=0x80000000
1043open hugetlbfs file /run/hugepage/acrn/huge_lv1/vm2/495AE2E526034D64AF76D4BC5A8EC0E5
1044open hugetlbfs file /run/hugepage/acrn/huge_lv2/vm2/495AE2E526034D64AF76D4BC5A8EC0E5
1045level 0 free/need pages:1/1 page size:0x200000
1046level 1 free/need pages:2/2 page size:0x40000000
1047
1048try to setup hugepage with:
1049	level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0
1050	level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0
1051total_size 0x180000000
1052
1053mmap ptr 0x0x7fe8616ee000 -> baseaddr 0x0x7fe880000000
1054mmap 0x80000000@0x7fe880000000
1055touch 2 pages with pagesz 0x40000000
1056mmap 0x200000@0x7fe97fe00000
1057touch 1 pages with pagesz 0x200000
1058
1059really setup hugepage with:
1060	level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0
1061	level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0
1062vm_init_vdevs
1063No correct pm notify channel given
1064pci init hostbridge
1065pci init lpc
1066pci init pci-gvt
1067polling 34...
1068Listening 34...
1069modify_bar_registration: bypass for pci-gvt
1070modify_bar_registration: bypass for pci-gvt
1071modify_bar_registration: bypass for pci-gvt
1072pci init virtio-blk
1073pci init virtio-net
1074pci init virtio-console
1075***********************************************
1076virt-console backend redirected to /dev/pts/1
1077***********************************************
1078tpm: init_vtpm2:Invalid socket path!
1079acrn_sw_load
1080SW_LOAD: partition blob ./OVMF.fd size 2097152 copy to guest 0xffe00000
1081SW_LOAD: build e820 7 entries to addr: 0x7fe8800ef008
1082SW_LOAD: entry[0]: addr 0x0000000000000000, size 0x00000000000a0000,  type 0x1
1083SW_LOAD: entry[1]: addr 0x00000000000a0000, size 0x0000000000060000,  type 0x2
1084SW_LOAD: entry[2]: addr 0x0000000000100000, size 0x000000007ff00000,  type 0x1
1085SW_LOAD: entry[3]: addr 0x0000000080000000, size 0x0000000008000000,  type 0x2
1086SW_LOAD: entry[4]: addr 0x00000000df000000, size 0x0000000001000000,  type 0x2
1087SW_LOAD: entry[5]: addr 0x00000000e0000000, size 0x0000000020000000,  type 0x2
1088SW_LOAD: entry[6]: addr 0x0000000100000000, size 0x0000000040000000,  type 0x2
1089SW_LOAD: ovmf_entry 0xfffffff0
1090add_cpu
1091vm mode changed from 0 to 2
1092VM loop exit
1093pci deinit hostbridge
1094pci deinit lpc
1095pci deinit pci-gvt
1096block_if sigcont handler!
1097Receive SIGINT to terminate application...
1098vm mode changed from 2 to 3
1099modify_bar_registration: bypass for pci-gvt
1100modify_bar_registration: bypass for pci-gvt
1101modify_bar_registration: bypass for pci-gvt
1102pci deinit virtio-blk
1103pci deinit virtio-net
1104vtnet tx thread closing...
1105pci deinit virtio-console
1106mngr_client_new: Failed to accept from fd 34, err: Invalid argument
1107Stop listening 34...
1108Stop polling 34...
1109No correct pm notify channel given
1110vm mode changed from 3 to 0
1111vm_create: vm2
1112VHM api version 1.0
1113vm_setup_memory: size=0x80000000
1114open hugetlbfs file /run/hugepage/acrn/huge_lv1/vm2/495AE2E526034D64AF76D4BC5A8EC0E5
1115open hugetlbfs file /run/hugepage/acrn/huge_lv2/vm2/495AE2E526034D64AF76D4BC5A8EC0E5
1116level 0 free/need pages:1/1 page size:0x200000
1117level 1 free/need pages:2/2 page size:0x40000000
1118
1119try to setup hugepage with:
1120	level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0
1121	level 1 - lowmem 0x80000000, biosmem /tmp/dm.XsdOVur     24:     Device (PCI0)
1122Warning  3073 -        Multiple types ^  (Device object requires either a _HID or _ADR, but not both)
1123
1124/tmp/dm.XsdOVur    841:     Processor (CPU0, 0x00, 0x00000000, 0x00) {}
1125Warning  3168 -                          ^ Legacy Processor() keyword detected. Use Device() keyword instead.
1126
1127[=3h[=3h[=3h[=3hUnable to locate graphics output protocol, graphic disabled: Not Found
1128Unable to locate graphics output protocol, graphic disabled: Not Found
1129Failed to setup the graphical mode: Not Found
1130Failed to setup the graphical mode: Not Found
1131kernelflinger-06.04-userdebug
1132General block storage identified
1133Setting PCI boot device to: Pci(0x3,0x0)/HD(Part1,Sig70D436D2-A946-4472-BA8A-C1A76E2427C0)
1134EFI path: \EFI\BOOT\BOOTX64.EFI
1135Found 18 block io protocols
1136Found disk as block io 0 for logical unit 0
1137Found label bootloader in partition 0
1138Upgrade file \EFI\BOOT\kernelflinger_new.efi is not exist
1139Use simulate RPMB
1140Found label boot_a in partition 2
1141Found label boot_b in partition 3
1142Found label misc in partition 4
1143Avb magic 0x0, 0x41, 0x42, 0x30
1144Avb magic is right
1145wake_source = Invalid wake source (0xFF)
1146reset_source = Unknown (0xFF)
1147reset_type = Invalid Reset Type (0xFF)
1148Bootlogic: Choosing boot target
1149Bootlogic: Check osloader command line...
1150Bootlogic: Check fastboot sentinel...
1151checking ESP for \force_fastboot
1152Bootlogic: Check magic key...
1153Couldn't read timeout variable; assuming default
1154Reset wait time: 200
1155Bootlogic: Check watchdog...
1156Bootlogic: Check battery insertion...
1157Bootlogic: Check BCB...
1158Locating BCB
1159Found label misc in partition 4
1160Reading BCB
1161Disconnect(36)!
1162Disconnect(42)!
1163Disconnect(43)!
1164BCB: cmd '' status ''
1165Bootlogic: Check reboot target...
1166checking LoaderEntryOneShot
1167Bootlogic: Check battery level...
1168WARNING: charging protocol disabled, assume battery level is ab