NWa94rEZ

1pi@raspberrypi:~/cam $ dmesg
2[    0.000000] Booting Linux on physical CPU 0x0
3[    0.000000] Linux version 4.19.118+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1311 Mon Apr 27 14:16:15 BST 2020
4[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
5[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
6[    0.000000] OF: fdt: Machine model: Raspberry Pi Model B Rev 2
7[    0.000000] Memory policy: Data cache writeback
8[    0.000000] cma: Reserved 8 MiB at 0x17400000
9[    0.000000] On node 0 totalpages: 98304
10[    0.000000]   Normal zone: 864 pages used for memmap
11[    0.000000]   Normal zone: 0 pages reserved
12[    0.000000]   Normal zone: 98304 pages, LIFO batch:31
13[    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x494 with crng_init=0
14[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
15[    0.000000] pcpu-alloc: [0] 0 
16[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 97440
17[    0.000000] Kernel command line: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=3ac8ba05-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
18[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
19[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
20[    0.000000] Memory: 369168K/393216K available (7168K kernel code, 656K rwdata, 2132K rodata, 468K init, 797K bss, 15856K reserved, 8192K cma-reserved)
21[    0.000000] Virtual kernel memory layout:
22                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
23                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
24                   vmalloc : 0xd8800000 - 0xff800000   ( 624 MB)
25                   lowmem  : 0xc0000000 - 0xd8000000   ( 384 MB)
26                   modules : 0xbf000000 - 0xc0000000   (  16 MB)
27                     .text : 0x(ptrval) - 0x(ptrval)   (7170 kB)
28                     .init : 0x(ptrval) - 0x(ptrval)   ( 468 kB)
29                     .data : 0x(ptrval) - 0x(ptrval)   ( 657 kB)
30                      .bss : 0x(ptrval) - 0x(ptrval)   ( 798 kB)
31[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
32[    0.000000] ftrace: allocating 25728 entries in 76 pages
33[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
34[    0.000032] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
35[    0.000094] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
36[    0.000223] bcm2835: system timer (irq = 27)
37[    0.000646] Console: colour dummy device 80x30
38[    0.001276] console [tty1] enabled
39[    0.001357] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
40[    0.060398] pid_max: default: 32768 minimum: 301
41[    0.060971] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
42[    0.061033] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
43[    0.062470] CPU: Testing write buffer coherency: ok
44[    0.063846] Setting up static identity map for 0x8200 - 0x8238
45[    0.065295] devtmpfs: initialized
46[    0.076616] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
47[    0.077087] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
48[    0.077163] futex hash table entries: 256 (order: -1, 3072 bytes)
49[    0.078526] pinctrl core: initialized pinctrl subsystem
50[    0.080140] NET: Registered protocol family 16
51[    0.083600] DMA: preallocated 1024 KiB pool for atomic coherent allocations
52[    0.091106] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
53[    0.091181] hw-breakpoint: maximum watchpoint size is 4 bytes.
54[    0.091352] Serial: AMBA PL011 UART driver
55[    0.094621] bcm2835-mbox 2000b880.mailbox: mailbox enabled
56[    0.110710] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-04-15 11:44, variant start_x
57[    0.120736] raspberrypi-firmware soc:firmware: Firmware hash is 82f9bb929ce2186eb1824178c1ae82902ad6275c
58[    0.172010] bcm2835-dma 20007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
59[    0.174589] SCSI subsystem initialized
60[    0.174936] usbcore: registered new interface driver usbfs
61[    0.175080] usbcore: registered new interface driver hub
62[    0.175338] usbcore: registered new device driver usb
63[    0.177813] clocksource: Switched to clocksource timer
64[    0.285872] VFS: Disk quotas dquot_6.6.0
65[    0.286058] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
66[    0.286423] FS-Cache: Loaded
67[    0.286824] CacheFiles: Loaded
68[    0.305900] NET: Registered protocol family 2
69[    0.307259] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
70[    0.307385] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
71[    0.307500] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
72[    0.307620] TCP: Hash tables configured (established 4096 bind 4096)
73[    0.307913] UDP hash table entries: 256 (order: 0, 4096 bytes)
74[    0.307985] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
75[    0.308459] NET: Registered protocol family 1
76[    0.309592] RPC: Registered named UNIX socket transport module.
77[    0.309655] RPC: Registered udp transport module.
78[    0.309685] RPC: Registered tcp transport module.
79[    0.309711] RPC: Registered tcp NFSv4.1 backchannel transport module.
80[    0.312013] hw perfevents: no irqs for PMU, sampling events not supported
81[    0.312138] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
82[    0.316690] Initialise system trusted keyrings
83[    0.317160] workingset: timestamp_bits=14 max_order=17 bucket_order=3
84[    0.332610] FS-Cache: Netfs 'nfs' registered for caching
85[    0.333997] NFS: Registering the id_resolver key type
86[    0.334095] Key type id_resolver registered
87[    0.334129] Key type id_legacy registered
88[    0.334180] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
89[    0.339986] Key type asymmetric registered
90[    0.340057] Asymmetric key parser 'x509' registered
91[    0.340191] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
92[    0.340701] io scheduler noop registered
93[    0.340758] io scheduler deadline registered (default)
94[    0.341418] io scheduler cfq registered
95[    0.341470] io scheduler mq-deadline registered (default)
96[    0.341504] io scheduler kyber registered
97[    0.344269] bcm2708_fb soc:fb: FB found 1 display(s)
98[    0.353453] Console: switching to colour frame buffer device 82x26
99[    0.361082] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416
100[    0.370238] bcm2835-rng 20104000.rng: hwrng registered
101[    0.373461] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
102[    0.380188] vc-sm: Videocore shared memory driver
103[    0.383765] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
104[    0.409926] brd: module loaded
105[    0.426643] loop: module loaded
106[    0.430586] Loading iSCSI transport class v2.0-870.
107[    0.434484] usbcore: registered new interface driver smsc95xx
108[    0.437342] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
109[    0.468326] dwc_otg 20980000.usb: base=(ptrval)
110[    0.671503] Core Release: 2.80a
111[    0.674266] Setting default values for core params
112[    0.677059] Finished setting default values for core params
113[    0.880401] Using Buffer DMA mode
114[    0.883285] Periodic Transfer Interrupt Enhancement - disabled
115[    0.886159] Multiprocessor Interrupt Enhancement - disabled
116[    0.889036] OTG VER PARAM: 0, OTG VER FLAG: 0
117[    0.891919] Dedicated Tx FIFOs mode
118[    0.895465] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = d7514000 dma = 0x57514000 len=9024
119[    0.901163] FIQ FSM acceleration enabled for :
120               Non-periodic Split Transactions
121               Periodic Split Transactions
122               High-Speed Isochronous Endpoints
123               Interrupt/Control Split Transaction hack enabled
124[    0.913895] dwc_otg: Microframe scheduler enabled
125[    0.914152] WARN::hcd_init_fiq:457: FIQ on core 0
126[    0.916793] WARN::hcd_init_fiq:458: FIQ ASM at c052bec4 length 36
127[    0.919388] WARN::hcd_init_fiq:497: MPHI regs_base at d8810000
128[    0.921990] dwc_otg 20980000.usb: DWC OTG Controller
129[    0.924637] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
130[    0.927327] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
131[    0.930022] Init: Port Power? op_state=1
132[    0.932589] Init: Power Port (0)
133[    0.935479] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
134[    0.940590] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
135[    0.943333] usb usb1: Product: DWC OTG Controller
136[    0.946010] usb usb1: Manufacturer: Linux 4.19.118+ dwc_otg_hcd
137[    0.948793] usb usb1: SerialNumber: 20980000.usb
138[    0.952636] hub 1-0:1.0: USB hub found
139[    0.955301] hub 1-0:1.0: 1 port detected
140[    0.959009] dwc_otg: FIQ enabled
141[    0.959022] dwc_otg: NAK holdoff enabled
142[    0.959029] dwc_otg: FIQ split-transaction FSM enabled
143[    0.959049] Module dwc_common_port init
144[    0.959610] usbcore: registered new interface driver usb-storage
145[    0.962805] mousedev: PS/2 mouse device common for all mice
146[    0.966834] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
147[    0.970276] bcm2835-cpufreq: min=700000 max=700000
148[    0.973745] sdhci: Secure Digital Host Controller Interface driver
149[    0.976538] sdhci: Copyright(c) Pierre Ossman
150[    0.980070] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
151[    0.983257] sdhci-pltfm: SDHCI platform and OF driver helper
152[    0.986750] ledtrig-cpu: registered to indicate activity on CPUs
153[    0.989868] hidraw: raw HID events driver (C) Jiri Kosina
154[    0.993042] usbcore: registered new interface driver usbhid
155[    0.995924] usbhid: USB HID core driver
156[    0.999997] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
157[    1.005119] [vc_sm_connected_init]: start
158[    1.015335] [vc_sm_connected_init]: end - returning 0
159[    1.020137] Initializing XFRM netlink socket
160[    1.022932] NET: Registered protocol family 17
161[    1.025772] Key type dns_resolver registered
162[    1.030545] registered taskstats version 1
163[    1.033291] Loading compiled-in X.509 certificates
164[    1.046063] uart-pl011 20201000.serial: cts_event_workaround enabled
165[    1.049182] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
166[    1.952238] console [ttyAMA0] enabled
167[    1.962301] sdhost: log_buf @ (ptrval) (57513000)
168[    2.017346] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
169[    2.027565] of_cfs_init
170[    2.053188] of_cfs_init: OK
171[    2.059689] Waiting for root device PARTUUID=3ac8ba05-02...
172[    2.068720] random: fast init done
173[    2.075131] Indeed it is in host mode hprt0 = 00021501
174[    2.176007] mmc0: host does not support reading read-only switch, assuming write-enable
175[    2.191919] mmc0: new high speed SDHC card at address 0002
176[    2.202276] mmcblk0: mmc0:0002 00000 7.67 GiB
177[    2.212383]  mmcblk0: p1 p2
178[    2.244149] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
179[    2.258175] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
180[    2.278635] devtmpfs: mounted
181[    2.287992] usb 1-1: new high-speed USB device number 2 using dwc_otg
182[    2.297746] Indeed it is in host mode hprt0 = 00001101
183[    2.368692] Freeing unused kernel memory: 468K
184[    2.376130] This architecture does not have kernel memory protection.
185[    2.385675] Run /sbin/init as init process
186[    2.568411] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
187[    2.583117] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
188[    2.596167] hub 1-1:1.0: USB hub found
189[    2.609214] hub 1-1:1.0: 5 ports detected
190[    2.937954] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
191[    3.088453] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
192[    3.103337] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
193[    3.118225] smsc95xx v1.0.6
194[    3.214647] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
195[    3.282082] systemd[1]: System time before build time, advancing clock.
196[    3.327947] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
197[    3.459051] NET: Registered protocol family 10
198[    3.469683] Segment Routing with IPv6
199[    3.492338] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
200[    3.507592] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
201[    3.518451] usb 1-1.3: Product: 802.11 n WLAN
202[    3.526232] usb 1-1.3: Manufacturer: Ralink
203[    3.533777] usb 1-1.3: SerialNumber: 1.0
204[    3.582808] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
205[    3.616222] systemd[1]: Detected architecture arm.
206[    3.647171] systemd[1]: Set hostname to <raspberrypi>.
207[    5.204132] uart-pl011 20201000.serial: no DMA platform data
208[    6.342260] random: systemd: uninitialized urandom read (16 bytes read)
209[    6.376385] random: systemd: uninitialized urandom read (16 bytes read)
210[    6.387663] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
211[    6.406412] random: systemd: uninitialized urandom read (16 bytes read)
212[    6.418056] systemd[1]: Listening on fsck to fsckd communication Socket.
213[    6.478381] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
214[    6.503153] systemd[1]: Listening on Syslog Socket.
215[    6.516716] systemd[1]: Listening on initctl Compatibility Named Pipe.
216[    6.532852] systemd[1]: Listening on Journal Socket.
217[    6.561410] systemd[1]: Mounting POSIX Message Queue File System...
218[    8.661739] systemd[1]: Mounted Kernel Configuration File System.
219[    8.851576] systemd[1]: Started File System Check Daemon to report status.
220[    9.069179] systemd[1]: Started Apply Kernel Variables.
221[    9.296887] systemd[1]: Started Journal Service.
222[   10.581548] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
223[   11.267415] systemd-journald[76]: Received request to flush runtime journal from PID 1
224[   13.492631] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
225[   13.495622] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
226[   13.495650] [vc_sm_connected_init]: start
227[   13.511295] media: Linux media interface: v0.10
228[   13.548179] [vc_sm_connected_init]: installed successfully
229[   13.685224] videodev: Linux video capture interface: v2.00
230[   13.818446] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
231[   13.848250] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
232[   13.900711] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
233[   13.937461] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
234[   14.294816] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
235[   14.469529] bcm2835_audio soc:audio: card created with 8 channels
236[   14.575571] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
237[   14.575635] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
238[   14.599670] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
239[   14.600171] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
240[   14.611678] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
241[   14.611739] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
242[   14.639574] bcm2835-v4l2: scene mode selected 0, was 0
243[   14.642159] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1280x720
244[   14.654548] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded.
245[   18.688814] cfg80211: Loading compiled-in X.509 certificates for regulatory database
246[   19.262140] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
247[   22.397983] usb 1-1.3: reset high-speed USB device number 4 using dwc_otg
248[   22.568825] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
249[   24.154870] 8021q: 802.1Q VLAN Support v1.8
250[   24.239002] random: crng init done
251[   24.239030] random: 7 urandom warning(s) missed due to ratelimiting
252[   24.335165] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000f detected
253[   25.389266] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
254[   25.410194] usbcore: registered new interface driver rt2800usb
255[   25.688366] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
256[   25.704652] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
257[   26.302042] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
258[   29.924443] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
259[   29.933238] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
260[   30.579061] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
261[   31.851627] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
262[   41.818981] wlan0: authenticate with e4:3e:d7:01:b8:03
263[   41.977511] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
264[   41.981364] wlan0: authenticated
265[   41.988686] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
266[   41.992911] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
267[   42.014208] wlan0: associated
268[   42.014297] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
269[   42.076782] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
270[   44.644816] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead
271[   82.327490] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
272
273[   82.328422] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
274
275[   82.558278] usb 1-1: USB disconnect, device number 2
276[   82.558306] usb 1-1.1: USB disconnect, device number 3
277[   82.558723] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
278[   82.558820] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
279[   82.579787] usb 1-1.3: USB disconnect, device number 4
280[   82.932389] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
281[   83.208188] Indeed it is in host mode hprt0 = 00021501
282[   83.708026] usb 1-1: new high-speed USB device number 5 using dwc_otg
283[   83.708276] Indeed it is in host mode hprt0 = 00001101
284[   84.358591] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
285[   84.358619] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
286[   84.363381] hub 1-1:1.0: USB hub found
287[   84.363594] hub 1-1:1.0: 5 ports detected
288[   84.702486] usb 1-1.1: new high-speed USB device number 6 using dwc_otg
289[   84.828650] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
290[   84.828679] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
291[   84.853765] smsc95xx v1.0.6
292[   84.951542] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
293[   85.048037] usb 1-1.3: new high-speed USB device number 7 using dwc_otg
294[   85.201791] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
295[   85.201821] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
296[   85.201834] usb 1-1.3: Product: 802.11 n WLAN
297[   85.201844] usb 1-1.3: Manufacturer: Ralink
298[   85.201855] usb 1-1.3: SerialNumber: 1.0
299[   85.298067] usb 1-1.3: reset high-speed USB device number 7 using dwc_otg
300[   85.438055] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
301[   85.626404] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
302[   85.651764] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
303[   85.695334] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
304[   85.695629] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
305[   86.937296] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
306[   92.184757] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
307[   92.186108] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
308[  107.487969] wlan0: authenticate with e4:3e:d7:01:b8:03
309[  107.586979] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
310[  107.596803] wlan0: authenticated
311[  107.607984] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
312[  107.620474] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
313[  107.644591] wlan0: associated
314[  107.645236] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
315[  107.717730] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
316[  117.857956] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
317
318[  117.860507] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
319
320[  118.058282] usb 1-1: USB disconnect, device number 5
321[  118.058311] usb 1-1.1: USB disconnect, device number 6
322[  118.058738] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
323[  118.058839] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
324[  118.067036] usb 1-1.3: USB disconnect, device number 7
325[  118.482308] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
326[  118.768188] Indeed it is in host mode hprt0 = 00021501
327[  119.268085] usb 1-1: new high-speed USB device number 8 using dwc_otg
328[  119.268370] Indeed it is in host mode hprt0 = 00001101
329[  119.808650] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
330[  119.808676] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
331[  119.813161] hub 1-1:1.0: USB hub found
332[  119.813454] hub 1-1:1.0: 5 ports detected
333[  120.158151] usb 1-1.1: new high-speed USB device number 9 using dwc_otg
334[  120.288573] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
335[  120.288603] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
336[  120.308558] smsc95xx v1.0.6
337[  120.425020] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
338[  120.518066] usb 1-1.3: new high-speed USB device number 10 using dwc_otg
339[  120.665915] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
340[  120.665942] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
341[  120.665957] usb 1-1.3: Product: 802.11 n WLAN
342[  120.665971] usb 1-1.3: Manufacturer: Ralink
343[  120.665981] usb 1-1.3: SerialNumber: 1.0
344[  120.778092] usb 1-1.3: reset high-speed USB device number 10 using dwc_otg
345[  120.918269] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
346[  121.032967] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 000f detected
347[  121.048218] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
348[  121.092722] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
349[  121.092963] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
350[  121.832871] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
351[  122.440060] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
352
353[  122.440594] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
354
355[  122.488467] NYET/NAK/ACK/other in non-error case, 0x00000002
356[  122.488528] NYET/NAK/ACK/other in non-error case, 0x00000002
357[  122.488570] NYET/NAK/ACK/other in non-error case, 0x00000002
358[  122.488664] smsc95xx 1-1.1:1.0 eth0: Failed to read reg index 0x00000114: -71
359[  122.488680] smsc95xx 1-1.1:1.0 eth0: Error reading MII_ACCESS
360[  122.488695] smsc95xx 1-1.1:1.0 eth0: MII is busy in smsc95xx_mdio_read
361[  122.488707] smsc95xx 1-1.1:1.0 eth0: Failed to read MII_BMSR
362[  122.558644] usb 1-1: USB disconnect, device number 8
363[  122.558670] usb 1-1.1: USB disconnect, device number 9
364[  122.559095] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
365[  122.562659] usb 1-1.3: USB disconnect, device number 10
366[  123.268299] Indeed it is in host mode hprt0 = 00021501
367[  123.638173] usb 1-1: new high-speed USB device number 11 using dwc_otg
368[  123.638432] Indeed it is in host mode hprt0 = 00001101
369[  124.028768] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
370[  124.028794] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
371[  124.032788] hub 1-1:1.0: USB hub found
372[  124.033004] hub 1-1:1.0: 5 ports detected
373[  124.368240] usb 1-1.1: new high-speed USB device number 12 using dwc_otg
374[  124.499201] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
375[  124.499268] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
376[  124.507084] smsc95xx v1.0.6
377[  124.611809] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
378[  124.708162] usb 1-1.3: new high-speed USB device number 13 using dwc_otg
379[  124.855479] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
380[  124.855507] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
381[  124.855520] usb 1-1.3: Product: 802.11 n WLAN
382[  124.855531] usb 1-1.3: Manufacturer: Ralink
383[  124.855543] usb 1-1.3: SerialNumber: 1.0
384[  124.958246] usb 1-1.3: reset high-speed USB device number 13 using dwc_otg
385[  125.098306] ieee80211 phy3: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
386[  125.164480] ieee80211 phy3: rt2x00_set_rf: Info - RF chipset 000f detected
387[  125.183661] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
388[  125.705466] ieee80211 phy3: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
389[  125.705717] ieee80211 phy3: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
390[  126.451442] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
391[  128.145722] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
392[  128.147914] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
393[  132.448616] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
394[  143.319160] wlan0: authenticate with e4:3e:d7:01:b8:03
395[  143.421614] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
396[  143.423498] wlan0: authenticated
397[  143.438515] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
398[  143.442671] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
399[  143.470654] wlan0: associated
400[  143.478001] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
401[  143.612279] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
402[  152.262119] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
403
404[  152.262956] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
405
406[  152.308922] usb 1-1: USB disconnect, device number 11
407[  152.308954] usb 1-1.1: USB disconnect, device number 12
408[  152.309371] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
409[  152.309471] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
410[  152.317892] usb 1-1.3: USB disconnect, device number 13
411[  152.892658] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
412[  153.168778] Indeed it is in host mode hprt0 = 00021501
413[  153.668653] usb 1-1: new high-speed USB device number 14 using dwc_otg
414[  153.668926] Indeed it is in host mode hprt0 = 00001101
415[  154.329179] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
416[  154.329207] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
417[  154.332670] hub 1-1:1.0: USB hub found
418[  154.332895] hub 1-1:1.0: 5 ports detected
419[  154.668651] usb 1-1.1: new high-speed USB device number 15 using dwc_otg
420[  154.799203] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
421[  154.799232] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
422[  154.802906] smsc95xx v1.0.6
423[  154.919940] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
424[  155.018769] usb 1-1.3: new high-speed USB device number 16 using dwc_otg
425[  155.166069] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
426[  155.166101] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
427[  155.166113] usb 1-1.3: Product: 802.11 n WLAN
428[  155.166124] usb 1-1.3: Manufacturer: Ralink
429[  155.166134] usb 1-1.3: SerialNumber: 1.0
430[  155.278769] usb 1-1.3: reset high-speed USB device number 16 using dwc_otg
431[  155.418643] ieee80211 phy4: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
432[  155.578152] ieee80211 phy4: rt2x00_set_rf: Info - RF chipset 000f detected
433[  155.588810] ieee80211 phy4: Selected rate control algorithm 'minstrel_ht'
434[  155.659795] ieee80211 phy4: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
435[  155.660035] ieee80211 phy4: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
436[  156.694833] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
437[  160.230493] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
438[  160.231909] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
439[  160.981341] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
440[  171.851268] wlan0: authenticate with e4:3e:d7:01:b8:03
441[  171.952755] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
442[  171.954651] wlan0: authenticated
443[  171.968787] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
444[  171.972943] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
445[  172.001565] wlan0: associated
446[  172.001662] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
447[  172.029248] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
448[  184.261010] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
449
450[  184.261358] ieee80211 phy4: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71
451[  184.261401] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
452
453[  184.309123] usb 1-1: USB disconnect, device number 14
454[  184.309152] usb 1-1.1: USB disconnect, device number 15
455[  184.309597] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
456[  184.309701] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
457[  184.329370] usb 1-1.3: USB disconnect, device number 16
458[  184.896514] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
459[  185.169010] Indeed it is in host mode hprt0 = 00021501
460[  185.658893] usb 1-1: new high-speed USB device number 17 using dwc_otg
461[  185.659168] Indeed it is in host mode hprt0 = 00001101
462[  186.284668] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
463[  186.284720] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
464[  186.289377] hub 1-1:1.0: USB hub found
465[  186.289578] hub 1-1:1.0: 5 ports detected
466[  186.608839] usb 1-1.1: new high-speed USB device number 18 using dwc_otg
467[  186.739353] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
468[  186.739379] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
469[  186.745365] smsc95xx v1.0.6
470[  186.851234] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
471[  186.948915] usb 1-1.3: new high-speed USB device number 19 using dwc_otg
472[  187.096154] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
473[  187.096182] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
474[  187.096198] usb 1-1.3: Product: 802.11 n WLAN
475[  187.096210] usb 1-1.3: Manufacturer: Ralink
476[  187.096220] usb 1-1.3: SerialNumber: 1.0
477[  187.198861] usb 1-1.3: reset high-speed USB device number 19 using dwc_otg
478[  187.339094] ieee80211 phy5: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
479[  187.443541] ieee80211 phy5: rt2x00_set_rf: Info - RF chipset 000f detected
480[  187.458991] ieee80211 phy5: Selected rate control algorithm 'minstrel_ht'
481[  187.487328] ieee80211 phy5: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
482[  187.487585] ieee80211 phy5: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
483[  188.451482] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
484[  189.330996] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
485
486[  189.331164] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
487
488[  189.559546] usb 1-1: USB disconnect, device number 17
489[  189.559575] usb 1-1.1: USB disconnect, device number 18
490[  189.560000] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
491[  189.567043] usb 1-1.3: USB disconnect, device number 19
492[  190.148987] Indeed it is in host mode hprt0 = 00021501
493[  190.518859] usb 1-1: new high-speed USB device number 20 using dwc_otg
494[  190.519102] Indeed it is in host mode hprt0 = 00001101
495[  190.929414] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
496[  190.929443] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
497[  190.931038] hub 1-1:1.0: USB hub found
498[  190.931233] hub 1-1:1.0: 5 ports detected
499[  191.278856] usb 1-1.1: new high-speed USB device number 21 using dwc_otg
500[  191.409357] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
501[  191.409387] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
502[  191.412943] smsc95xx v1.0.6
503[  191.529985] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
504[  191.628819] usb 1-1.3: new high-speed USB device number 22 using dwc_otg
505[  191.776235] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
506[  191.776261] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
507[  191.776274] usb 1-1.3: Product: 802.11 n WLAN
508[  191.776285] usb 1-1.3: Manufacturer: Ralink
509[  191.776296] usb 1-1.3: SerialNumber: 1.0
510[  191.878873] usb 1-1.3: reset high-speed USB device number 22 using dwc_otg
511[  192.028343] ieee80211 phy6: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
512[  192.260029] ieee80211 phy6: rt2x00_set_rf: Info - RF chipset 000f detected
513[  192.276804] ieee80211 phy6: Selected rate control algorithm 'minstrel_ht'
514[  192.344023] ieee80211 phy6: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
515[  192.344285] ieee80211 phy6: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
516[  193.533223] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
517[  196.196326] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
518[  196.198079] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
519[  198.122664] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
520[  207.873580] wlan0: authenticate with e4:3e:d7:01:b8:03
521[  207.975663] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
522[  207.977497] wlan0: authenticated
523[  207.988886] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
524[  207.993128] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
525[  208.020450] wlan0: associated
526[  208.020540] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
527[  208.046172] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
528
529[  208.046868] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
530
531[  208.059181] usb 1-1: USB disconnect, device number 20
532[  208.059211] usb 1-1.1: USB disconnect, device number 21
533[  208.059630] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
534[  208.059729] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
535[  208.070408] usb 1-1.3: USB disconnect, device number 22
536[  208.633276] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
537[  208.889060] Indeed it is in host mode hprt0 = 00021501
538[  209.378925] usb 1-1: new high-speed USB device number 23 using dwc_otg
539[  209.379229] Indeed it is in host mode hprt0 = 00001101
540[  209.765573] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
541[  209.765603] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
542[  209.779687] hub 1-1:1.0: USB hub found
543[  209.779920] hub 1-1:1.0: 5 ports detected
544[  210.108893] usb 1-1.1: new high-speed USB device number 24 using dwc_otg
545[  210.239447] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
546[  210.239481] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
547[  210.245437] smsc95xx v1.0.6
548[  210.363310] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
549[  210.458904] usb 1-1.3: new high-speed USB device number 25 using dwc_otg
550[  210.606191] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
551[  210.606218] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
552[  210.606233] usb 1-1.3: Product: 802.11 n WLAN
553[  210.606245] usb 1-1.3: Manufacturer: Ralink
554[  210.606256] usb 1-1.3: SerialNumber: 1.0
555[  210.708921] usb 1-1.3: reset high-speed USB device number 25 using dwc_otg
556[  210.848908] ieee80211 phy7: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
557[  211.014402] ieee80211 phy7: rt2x00_set_rf: Info - RF chipset 000f detected
558[  211.027665] ieee80211 phy7: Selected rate control algorithm 'minstrel_ht'
559[  211.448978] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
560[  211.450301] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
561[  213.221455] ieee80211 phy7: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
562[  213.221704] ieee80211 phy7: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
563[  213.974839] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
564[  215.021870] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
565[  225.006346] wlan0: authenticate with e4:3e:d7:01:b8:03
566[  225.136424] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
567[  225.142351] wlan0: authenticated
568[  225.149737] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
569[  225.152187] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
570
571[  225.152550] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
572
573[  225.309158] usb 1-1: USB disconnect, device number 23
574[  225.309188] usb 1-1.1: USB disconnect, device number 24
575[  225.309609] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
576[  225.309707] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
577[  225.317768] usb 1-1.3: USB disconnect, device number 25
578[  225.659029] wlan0: associate with e4:3e:d7:01:b8:03 (try 2/3)
579[  225.979064] Indeed it is in host mode hprt0 = 00021501
580[  226.409046] usb 1-1: new high-speed USB device number 26 using dwc_otg
581[  226.409295] Indeed it is in host mode hprt0 = 00001101
582[  226.919599] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
583[  226.919648] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
584[  226.939751] hub 1-1:1.0: USB hub found
585[  226.939959] hub 1-1:1.0: 5 ports detected
586[  227.268935] usb 1-1.1: new high-speed USB device number 27 using dwc_otg
587[  227.399463] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
588[  227.399494] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
589[  227.405556] smsc95xx v1.0.6
590[  227.517584] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
591[  227.608917] usb 1-1.3: new high-speed USB device number 28 using dwc_otg
592[  227.756718] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
593[  227.756747] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
594[  227.756760] usb 1-1.3: Product: 802.11 n WLAN
595[  227.756772] usb 1-1.3: Manufacturer: Ralink
596[  227.756782] usb 1-1.3: SerialNumber: 1.0
597[  227.869029] usb 1-1.3: reset high-speed USB device number 28 using dwc_otg
598[  228.009015] ieee80211 phy8: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
599[  228.112899] ieee80211 phy8: rt2x00_set_rf: Info - RF chipset 000f detected
600[  228.126796] ieee80211 phy8: Selected rate control algorithm 'minstrel_ht'
601[  229.383368] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
602[  229.384577] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
603[  230.895889] ieee80211 phy8: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
604[  230.896143] ieee80211 phy8: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
605[  231.634643] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
606[  241.238070] wlan0: authenticate with e4:3e:d7:01:b8:03
607[  241.376910] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
608[  241.381695] wlan0: authenticated
609[  241.390255] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
610[  241.394538] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
611[  241.415312] wlan0: associated
612[  241.415668] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
613[  241.455003] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
614[  317.495542] ieee80211 phy8: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -108
615[  317.495593] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
616
617[  317.498194] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
618
619[  317.599630] usb 1-1: USB disconnect, device number 26
620[  317.599657] usb 1-1.1: USB disconnect, device number 27
621[  317.600077] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
622[  317.600174] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
623[  317.619983] usb 1-1.3: USB disconnect, device number 28
624[  318.113881] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
625[  318.400057] Indeed it is in host mode hprt0 = 00021501
626[  318.900187] usb 1-1: new high-speed USB device number 29 using dwc_otg
627[  318.900452] Indeed it is in host mode hprt0 = 00001101
628[  319.411102] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
629[  319.411148] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
630[  319.415698] hub 1-1:1.0: USB hub found
631[  319.415913] hub 1-1:1.0: 5 ports detected
632[  319.760738] usb 1-1.1: new high-speed USB device number 30 using dwc_otg
633[  319.894900] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
634[  319.894926] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
635[  319.910770] smsc95xx v1.0.6
636[  320.028890] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
637[  320.120987] usb 1-1.3: new high-speed USB device number 31 using dwc_otg
638[  320.272492] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
639[  320.272518] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
640[  320.272530] usb 1-1.3: Product: 802.11 n WLAN
641[  320.272541] usb 1-1.3: Manufacturer: Ralink
642[  320.272552] usb 1-1.3: SerialNumber: 1.0
643[  320.371097] usb 1-1.3: reset high-speed USB device number 31 using dwc_otg
644[  320.511341] ieee80211 phy9: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
645[  320.615764] ieee80211 phy9: rt2x00_set_rf: Info - RF chipset 000f detected
646[  320.630497] ieee80211 phy9: Selected rate control algorithm 'minstrel_ht'
647[  320.659208] ieee80211 phy9: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
648[  320.659478] ieee80211 phy9: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
649[  321.594780] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
650[  326.288227] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
651[  326.289482] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
652[  327.045641] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
653[  337.999262] wlan0: authenticate with e4:3e:d7:01:b8:03
654[  338.084571] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
655[  338.088837] wlan0: authenticated
656[  338.100341] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
657[  338.104671] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
658[  338.126336] wlan0: associated
659[  338.126434] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
660[  338.227493] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
661[  345.277296] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
662
663[  345.278122] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
664
665[  345.363849] usb 1-1: USB disconnect, device number 29
666[  345.363877] usb 1-1.1: USB disconnect, device number 30
667[  345.364289] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
668[  345.364388] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
669[  345.384019] usb 1-1.3: USB disconnect, device number 31
670[  345.878278] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
671[  346.144078] Indeed it is in host mode hprt0 = 00021501
672[  346.644219] usb 1-1: new high-speed USB device number 32 using dwc_otg
673[  346.644471] Indeed it is in host mode hprt0 = 00001101
674[  347.257847] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
675[  347.257874] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
676[  347.262204] hub 1-1:1.0: USB hub found
677[  347.262393] hub 1-1:1.0: 5 ports detected
678[  347.604585] usb 1-1.1: new high-speed USB device number 33 using dwc_otg
679[  347.735082] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
680[  347.735110] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
681[  347.738785] smsc95xx v1.0.6
682[  347.865740] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
683[  347.964661] usb 1-1.3: new high-speed USB device number 34 using dwc_otg
684[  348.114195] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
685[  348.114222] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
686[  348.114236] usb 1-1.3: Product: 802.11 n WLAN
687[  348.114247] usb 1-1.3: Manufacturer: Ralink
688[  348.114259] usb 1-1.3: SerialNumber: 1.0
689[  348.224848] usb 1-1.3: reset high-speed USB device number 34 using dwc_otg
690[  348.364973] ieee80211 phy10: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
691[  348.510936] ieee80211 phy10: rt2x00_set_rf: Info - RF chipset 000f detected
692[  348.525190] ieee80211 phy10: Selected rate control algorithm 'minstrel_ht'
693[  348.600869] ieee80211 phy10: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
694[  348.601117] ieee80211 phy10: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
695[  349.748347] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
696[  354.410891] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
697[  354.412245] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
698[  355.406383] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
699[  365.025265] wlan0: authenticate with e4:3e:d7:01:b8:03
700[  365.120506] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
701[  365.123542] wlan0: authenticated
702[  365.141257] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
703[  365.145446] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
704[  365.173618] wlan0: associated
705[  365.173708] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
706[  365.186887] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
707[  377.276946] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
708
709[  377.278267] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
710
711[  377.375804] usb 1-1: USB disconnect, device number 32
712[  377.375835] usb 1-1.1: USB disconnect, device number 33
713[  377.376249] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
714[  377.376348] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
715[  377.395898] usb 1-1.3: USB disconnect, device number 34
716[  377.889898] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
717[  378.156014] Indeed it is in host mode hprt0 = 00021501
718[  378.685989] usb 1-1: new high-speed USB device number 35 using dwc_otg
719[  378.686254] Indeed it is in host mode hprt0 = 00001101
720[  379.226723] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
721[  379.226751] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
722[  379.231280] hub 1-1:1.0: USB hub found
723[  379.231487] hub 1-1:1.0: 5 ports detected
724[  379.566383] usb 1-1.1: new high-speed USB device number 36 using dwc_otg
725[  379.696966] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
726[  379.696996] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
727[  379.716636] smsc95xx v1.0.6
728[  379.821244] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
729[  379.917017] usb 1-1.3: new high-speed USB device number 37 using dwc_otg
730[  380.063791] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
731[  380.063819] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
732[  380.063832] usb 1-1.3: Product: 802.11 n WLAN
733[  380.063842] usb 1-1.3: Manufacturer: Ralink
734[  380.063853] usb 1-1.3: SerialNumber: 1.0
735[  380.176493] usb 1-1.3: reset high-speed USB device number 37 using dwc_otg
736[  380.316671] ieee80211 phy11: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
737[  380.422681] ieee80211 phy11: rt2x00_set_rf: Info - RF chipset 000f detected
738[  380.435702] ieee80211 phy11: Selected rate control algorithm 'minstrel_ht'
739[  380.489634] ieee80211 phy11: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
740[  380.489918] ieee80211 phy11: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
741[  381.277686] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
742[  386.712494] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
743[  386.714060] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
744[  387.670144] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
745[  388.691598] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
746
747[  388.691712] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
748
749[  388.879653] usb 1-1: USB disconnect, device number 35
750[  388.879682] usb 1-1.1: USB disconnect, device number 36
751[  388.880106] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
752[  388.880205] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
753[  388.905860] usb 1-1.3: USB disconnect, device number 37
754[  389.579736] Indeed it is in host mode hprt0 = 00021501
755[  390.079795] usb 1-1: new high-speed USB device number 38 using dwc_otg
756[  390.080046] Indeed it is in host mode hprt0 = 00001101
757[  390.540348] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
758[  390.540379] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
759[  390.545035] hub 1-1:1.0: USB hub found
760[  390.545226] hub 1-1:1.0: 5 ports detected
761[  390.879978] usb 1-1.1: new high-speed USB device number 39 using dwc_otg
762[  391.010593] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
763[  391.010620] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
764[  391.016612] smsc95xx v1.0.6
765[  391.132988] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
766[  391.230170] usb 1-1.3: new high-speed USB device number 40 using dwc_otg
767[  391.378091] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
768[  391.378116] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
769[  391.378132] usb 1-1.3: Product: 802.11 n WLAN
770[  391.378144] usb 1-1.3: Manufacturer: Ralink
771[  391.378154] usb 1-1.3: SerialNumber: 1.0
772[  391.493569] usb 1-1.3: reset high-speed USB device number 40 using dwc_otg
773[  391.630269] ieee80211 phy12: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
774[  391.725815] ieee80211 phy12: rt2x00_set_rf: Info - RF chipset 000f detected
775[  391.745280] ieee80211 phy12: Selected rate control algorithm 'minstrel_ht'
776[  392.922348] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
777[  392.923740] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
778[  394.427835] ieee80211 phy12: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
779[  394.428096] ieee80211 phy12: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
780[  395.152358] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
781[  404.838609] wlan0: authenticate with e4:3e:d7:01:b8:03
782[  404.931909] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
783[  404.933851] wlan0: authenticated
784[  404.944393] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
785[  404.950438] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
786[  404.972248] wlan0: associated
787[  404.972338] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
788[  404.992501] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
789[  405.006246] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
790
791[  405.006786] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
792
793[  405.134754] usb 1-1: USB disconnect, device number 38
794[  405.134782] usb 1-1.1: USB disconnect, device number 39
795[  405.135202] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
796[  405.135303] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
797[  405.154894] usb 1-1.3: USB disconnect, device number 40
798[  405.578576] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
799[  405.834836] Indeed it is in host mode hprt0 = 00021501
800[  406.334844] usb 1-1: new high-speed USB device number 41 using dwc_otg
801[  406.335088] Indeed it is in host mode hprt0 = 00001101
802[  406.725469] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
803[  406.725517] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
804[  406.730223] hub 1-1:1.0: USB hub found
805[  406.730450] hub 1-1:1.0: 5 ports detected
806[  407.075012] usb 1-1.1: new high-speed USB device number 42 using dwc_otg
807[  407.205607] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
808[  407.205636] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
809[  407.211484] smsc95xx v1.0.6
810[  407.313696] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
811[  407.405142] usb 1-1.3: new high-speed USB device number 43 using dwc_otg
812[  407.552400] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
813[  407.552426] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
814[  407.552439] usb 1-1.3: Product: 802.11 n WLAN
815[  407.552451] usb 1-1.3: Manufacturer: Ralink
816[  407.552464] usb 1-1.3: SerialNumber: 1.0
817[  407.655204] usb 1-1.3: reset high-speed USB device number 43 using dwc_otg
818[  407.795332] ieee80211 phy13: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
819[  407.989125] ieee80211 phy13: rt2x00_set_rf: Info - RF chipset 000f detected
820[  408.001117] ieee80211 phy13: Selected rate control algorithm 'minstrel_ht'
821[  408.424016] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
822[  408.425395] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
823[  410.182488] ieee80211 phy13: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
824[  410.182731] ieee80211 phy13: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
825[  410.921729] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
826[  412.012305] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
827[  422.040030] wlan0: authenticate with e4:3e:d7:01:b8:03
828[  422.180058] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
829[  422.182006] wlan0: authenticated
830[  422.199605] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
831[  422.204912] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
832[  422.224952] wlan0: associated
833[  422.225320] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
834[  422.298387] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
835[  644.489595] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
836
837[  644.491903] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
838
839[  644.547920] usb 1-1: USB disconnect, device number 41
840[  644.547951] usb 1-1.1: USB disconnect, device number 42
841[  644.548384] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
842[  644.548485] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
843[  644.568034] usb 1-1.3: USB disconnect, device number 43
844[  645.131830] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
845[  645.407532] Indeed it is in host mode hprt0 = 00021501
846[  645.907290] usb 1-1: new high-speed USB device number 44 using dwc_otg
847[  645.907580] Indeed it is in host mode hprt0 = 00001101
848[  646.568578] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
849[  646.568628] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
850[  646.573209] hub 1-1:1.0: USB hub found
851[  646.573433] hub 1-1:1.0: 5 ports detected
852[  646.917040] usb 1-1.1: new high-speed USB device number 45 using dwc_otg
853[  647.047528] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
854[  647.047558] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
855[  647.067440] smsc95xx v1.0.6
856[  647.179350] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
857[  647.276964] usb 1-1.3: new high-speed USB device number 46 using dwc_otg
858[  647.424327] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
859[  647.424356] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
860[  647.424370] usb 1-1.3: Product: 802.11 n WLAN
861[  647.424383] usb 1-1.3: Manufacturer: Ralink
862[  647.424394] usb 1-1.3: SerialNumber: 1.0
863[  647.536824] usb 1-1.3: reset high-speed USB device number 46 using dwc_otg
864[  647.677020] ieee80211 phy14: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
865[  647.787812] ieee80211 phy14: rt2x00_set_rf: Info - RF chipset 000f detected
866[  647.806918] ieee80211 phy14: Selected rate control algorithm 'minstrel_ht'
867[  647.835539] ieee80211 phy14: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
868[  647.835792] ieee80211 phy14: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
869[  648.959593] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
870[  654.292835] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
871[  654.293979] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
872[  669.563214] wlan0: authenticate with e4:3e:d7:01:b8:03
873[  669.660124] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
874[  669.665612] wlan0: authenticated
875[  669.672989] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
876[  669.677283] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
877[  669.699349] wlan0: associated
878[  669.699449] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
879[  669.716141] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
880[  685.266387] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
881
882[  685.267041] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
883
884[  685.290138] usb 1-1: USB disconnect, device number 44
885[  685.290167] usb 1-1.1: USB disconnect, device number 45
886[  685.290576] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
887[  685.290670] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
888[  685.310329] usb 1-1.3: USB disconnect, device number 46
889[  685.873922] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
890[  686.150150] Indeed it is in host mode hprt0 = 00021501
891[  686.649756] usb 1-1: new high-speed USB device number 47 using dwc_otg
892[  686.650057] Indeed it is in host mode hprt0 = 00001101
893[  687.190237] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
894[  687.190265] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
895[  687.194730] hub 1-1:1.0: USB hub found
896[  687.194939] hub 1-1:1.0: 5 ports detected
897[  687.509710] usb 1-1.1: new high-speed USB device number 48 using dwc_otg
898[  687.640220] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
899[  687.640247] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
900[  687.662818] smsc95xx v1.0.6
901[  687.769657] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
902[  687.869659] usb 1-1.3: new high-speed USB device number 49 using dwc_otg
903[  688.017622] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
904[  688.017648] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
905[  688.017661] usb 1-1.3: Product: 802.11 n WLAN
906[  688.017673] usb 1-1.3: Manufacturer: Ralink
907[  688.017685] usb 1-1.3: SerialNumber: 1.0
908[  688.129591] usb 1-1.3: reset high-speed USB device number 49 using dwc_otg
909[  688.269588] ieee80211 phy15: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
910[  688.375014] ieee80211 phy15: rt2x00_set_rf: Info - RF chipset 000f detected
911[  688.394458] ieee80211 phy15: Selected rate control algorithm 'minstrel_ht'
912[  688.427230] ieee80211 phy15: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
913[  688.427479] ieee80211 phy15: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
914[  689.405367] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
915[  694.186567] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
916[  694.187707] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
917[  710.207708] wlan0: authenticate with e4:3e:d7:01:b8:03
918[  710.307302] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
919[  710.310159] wlan0: authenticated
920[  710.318030] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
921[  710.322409] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
922[  710.350877] wlan0: associated
923[  710.366460] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
924[  710.385181] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
925[  819.469197] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
926
927[  819.471221] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
928
929[  819.538748] usb 1-1: USB disconnect, device number 47
930[  819.538776] usb 1-1.1: USB disconnect, device number 48
931[  819.539193] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
932[  819.539288] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
933[  819.547391] usb 1-1.3: USB disconnect, device number 49
934[  820.102628] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
935[  820.378688] Indeed it is in host mode hprt0 = 00021501
936[  820.878548] usb 1-1: new high-speed USB device number 50 using dwc_otg
937[  820.878806] Indeed it is in host mode hprt0 = 00001101
938[  821.519294] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
939[  821.519326] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
940[  821.523984] hub 1-1:1.0: USB hub found
941[  821.524218] hub 1-1:1.0: 5 ports detected
942[  821.868590] usb 1-1.1: new high-speed USB device number 51 using dwc_otg
943[  821.999172] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
944[  821.999199] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
945[  822.002794] smsc95xx v1.0.6
946[  822.117630] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
947[  822.228662] usb 1-1.3: new high-speed USB device number 52 using dwc_otg
948[  822.376147] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
949[  822.376173] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
950[  822.376185] usb 1-1.3: Product: 802.11 n WLAN
951[  822.376196] usb 1-1.3: Manufacturer: Ralink
952[  822.376206] usb 1-1.3: SerialNumber: 1.0
953[  822.488649] usb 1-1.3: reset high-speed USB device number 52 using dwc_otg
954[  822.628587] ieee80211 phy16: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
955[  822.798724] ieee80211 phy16: rt2x00_set_rf: Info - RF chipset 000f detected
956[  822.805641] ieee80211 phy16: Selected rate control algorithm 'minstrel_ht'
957[  822.866618] ieee80211 phy16: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
958[  822.866865] ieee80211 phy16: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
959[  823.934368] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
960[  825.301087] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
961
962[  825.301168] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
963
964[  825.539279] usb 1-1: USB disconnect, device number 50
965[  825.539308] usb 1-1.1: USB disconnect, device number 51
966[  825.539760] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
967[  825.542979] usb 1-1.3: USB disconnect, device number 52
968[  826.139129] Indeed it is in host mode hprt0 = 00021501
969[  826.529072] usb 1-1: new high-speed USB device number 53 using dwc_otg
970[  826.529326] Indeed it is in host mode hprt0 = 00001101
971[  826.969495] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
972[  826.969523] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
973[  826.971173] hub 1-1:1.0: USB hub found
974[  826.971382] hub 1-1:1.0: 5 ports detected
975[  827.289038] usb 1-1.1: new high-speed USB device number 54 using dwc_otg
976[  827.419742] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
977[  827.419771] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
978[  827.423407] smsc95xx v1.0.6
979[  827.552132] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
980[  827.649092] usb 1-1.3: new high-speed USB device number 55 using dwc_otg
981[  827.796363] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
982[  827.796390] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
983[  827.796403] usb 1-1.3: Product: 802.11 n WLAN
984[  827.796414] usb 1-1.3: Manufacturer: Ralink
985[  827.796427] usb 1-1.3: SerialNumber: 1.0
986[  827.909012] usb 1-1.3: reset high-speed USB device number 55 using dwc_otg
987[  828.049231] ieee80211 phy17: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
988[  828.136790] ieee80211 phy17: rt2x00_set_rf: Info - RF chipset 000f detected
989[  828.150944] ieee80211 phy17: Selected rate control algorithm 'minstrel_ht'
990[  828.204328] ieee80211 phy17: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
991[  828.204588] ieee80211 phy17: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
992[  828.982196] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
993[  831.771502] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
994[  831.772574] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
995[  848.858717] wlan0: authenticate with e4:3e:d7:01:b8:03
996[  849.016859] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
997[  849.018855] wlan0: authenticated
998[  849.030355] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
999[  849.034701] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
1000[  849.056967] wlan0: associated
1001[  849.057374] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
1002[  849.117522] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
1003[  856.789798] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
1004
1005[  856.790166] ieee80211 phy17: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -108
1006[  856.790210] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
1007
1008[  856.799938] usb 1-1: USB disconnect, device number 53
1009[  856.799968] usb 1-1.1: USB disconnect, device number 54
1010[  856.800398] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
1011[  856.800506] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
1012[  856.819889] usb 1-1.3: USB disconnect, device number 55
1013[  857.375136] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
1014[  857.651015] Indeed it is in host mode hprt0 = 00021501
1015[  858.150872] usb 1-1: new high-speed USB device number 56 using dwc_otg
1016[  858.151126] Indeed it is in host mode hprt0 = 00001101
1017[  858.671790] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
1018[  858.671821] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1019[  858.676909] hub 1-1:1.0: USB hub found
1020[  858.677146] hub 1-1:1.0: 5 ports detected
1021[  859.010917] usb 1-1.1: new high-speed USB device number 57 using dwc_otg
1022[  859.145184] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
1023[  859.145212] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1024[  859.163859] smsc95xx v1.0.6
1025[  859.272736] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
1026[  859.371013] usb 1-1.3: new high-speed USB device number 58 using dwc_otg
1027[  859.518413] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
1028[  859.518440] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1029[  859.518456] usb 1-1.3: Product: 802.11 n WLAN
1030[  859.518468] usb 1-1.3: Manufacturer: Ralink
1031[  859.518478] usb 1-1.3: SerialNumber: 1.0
1032[  859.634797] usb 1-1.3: reset high-speed USB device number 58 using dwc_otg
1033[  859.770966] ieee80211 phy18: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
1034[  859.883300] ieee80211 phy18: rt2x00_set_rf: Info - RF chipset 000f detected
1035[  859.900016] ieee80211 phy18: Selected rate control algorithm 'minstrel_ht'
1036[  859.940739] ieee80211 phy18: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
1037[  859.961169] ieee80211 phy18: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
1038[  860.739121] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
1039[  861.913451] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
1040
1041[  861.913603] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
1042
1043[  862.041646] usb 1-1: USB disconnect, device number 56
1044[  862.041673] usb 1-1.1: USB disconnect, device number 57
1045[  862.042097] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
1046[  862.045174] usb 1-1.3: USB disconnect, device number 58
1047[  862.751374] Indeed it is in host mode hprt0 = 00021501
1048[  863.181197] usb 1-1: new high-speed USB device number 59 using dwc_otg
1049[  863.181467] Indeed it is in host mode hprt0 = 00001101
1050[  863.591705] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
1051[  863.591754] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1052[  863.593405] hub 1-1:1.0: USB hub found
1053[  863.593628] hub 1-1:1.0: 5 ports detected
1054[  863.934931] usb 1-1.1: new high-speed USB device number 60 using dwc_otg
1055[  864.061702] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
1056[  864.061730] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1057[  864.065253] smsc95xx v1.0.6
1058[  864.176767] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
1059[  864.271203] usb 1-1.3: new high-speed USB device number 61 using dwc_otg
1060[  864.418961] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
1061[  864.418988] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1062[  864.419001] usb 1-1.3: Product: 802.11 n WLAN
1063[  864.419012] usb 1-1.3: Manufacturer: Ralink
1064[  864.419023] usb 1-1.3: SerialNumber: 1.0
1065[  864.531238] usb 1-1.3: reset high-speed USB device number 61 using dwc_otg
1066[  864.671350] ieee80211 phy19: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
1067[  864.783414] ieee80211 phy19: rt2x00_set_rf: Info - RF chipset 000f detected
1068[  864.789132] ieee80211 phy19: Selected rate control algorithm 'minstrel_ht'
1069[  865.239101] ieee80211 phy19: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
1070[  865.239342] ieee80211 phy19: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
1071[  865.987051] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
1072[  867.168771] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
1073[  867.170934] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
1074[  871.407684] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
1075[  882.546714] wlan0: authenticate with e4:3e:d7:01:b8:03
1076[  882.707817] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
1077[  882.715989] wlan0: authenticated
1078[  882.732195] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
1079[  882.738018] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
1080[  882.758276] wlan0: associated
1081[  882.810696] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
1082[  882.905676] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
1083
1084[  882.906152] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
1085
1086[  882.916280] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
1087[  883.042564] usb 1-1: USB disconnect, device number 59
1088[  883.042596] usb 1-1.1: USB disconnect, device number 60
1089[  883.043030] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
1090[  883.043133] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
1091[  883.067816] usb 1-1.3: USB disconnect, device number 61
1092[  883.486432] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
1093[  883.752456] Indeed it is in host mode hprt0 = 00021501
1094[  884.252336] usb 1-1: new high-speed USB device number 62 using dwc_otg
1095[  884.252622] Indeed it is in host mode hprt0 = 00001101
1096[  884.902861] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
1097[  884.902909] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1098[  884.907335] hub 1-1:1.0: USB hub found
1099[  884.907536] hub 1-1:1.0: 5 ports detected
1100[  885.252360] usb 1-1.1: new high-speed USB device number 63 using dwc_otg
1101[  885.382831] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
1102[  885.382860] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1103[  885.391920] smsc95xx v1.0.6
1104[  885.553328] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
1105[  885.652388] usb 1-1.3: new high-speed USB device number 64 using dwc_otg
1106[  885.803692] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
1107[  885.803718] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1108[  885.803733] usb 1-1.3: Product: 802.11 n WLAN
1109[  885.803744] usb 1-1.3: Manufacturer: Ralink
1110[  885.803756] usb 1-1.3: SerialNumber: 1.0
1111[  885.902402] usb 1-1.3: reset high-speed USB device number 64 using dwc_otg
1112[  886.042472] ieee80211 phy20: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
1113[  886.164606] ieee80211 phy20: rt2x00_set_rf: Info - RF chipset 000f detected
1114[  886.169949] ieee80211 phy20: Selected rate control algorithm 'minstrel_ht'
1115[  887.762268] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
1116[  887.763652] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
1117[  889.150293] ieee80211 phy20: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
1118[  889.150566] ieee80211 phy20: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
1119[  889.845975] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
1120[  899.591498] wlan0: authenticate with e4:3e:d7:01:b8:03
1121[  899.689490] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
1122[  899.691388] wlan0: authenticated
1123[  899.703034] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
1124[  899.714042] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
1125[  899.735856] wlan0: associated
1126[  899.736226] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
1127[  899.807337] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
1128[  918.308481] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
1129
1130[  918.308806] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
1131
1132[  918.544246] usb 1-1: USB disconnect, device number 62
1133[  918.544274] usb 1-1.1: USB disconnect, device number 63
1134[  918.544689] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
1135[  918.544787] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
1136[  918.564480] usb 1-1.3: USB disconnect, device number 64
1137[  918.918077] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
1138[  919.204683] Indeed it is in host mode hprt0 = 00021501
1139[  919.694033] usb 1-1: new high-speed USB device number 65 using dwc_otg
1140[  919.694295] Indeed it is in host mode hprt0 = 00001101
1141[  920.224546] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
1142[  920.224575] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1143[  920.227690] hub 1-1:1.0: USB hub found
1144[  920.227885] hub 1-1:1.0: 5 ports detected
1145[  920.554004] usb 1-1.1: new high-speed USB device number 66 using dwc_otg
1146[  920.684559] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
1147[  920.684585] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1148[  920.690472] smsc95xx v1.0.6
1149[  920.800687] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
1150[  920.894064] usb 1-1.3: new high-speed USB device number 67 using dwc_otg
1151[  921.044032] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
1152[  921.044060] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1153[  921.044072] usb 1-1.3: Product: 802.11 n WLAN
1154[  921.044083] usb 1-1.3: Manufacturer: Ralink
1155[  921.044094] usb 1-1.3: SerialNumber: 1.0
1156[  921.144092] usb 1-1.3: reset high-speed USB device number 67 using dwc_otg
1157[  921.284344] ieee80211 phy21: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
1158[  921.394088] ieee80211 phy21: rt2x00_set_rf: Info - RF chipset 000f detected
1159[  921.400787] ieee80211 phy21: Selected rate control algorithm 'minstrel_ht'
1160[  921.448995] ieee80211 phy21: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
1161[  921.449275] ieee80211 phy21: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
1162[  922.353230] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
1163[  922.776254] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
1164
1165[  922.776481] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
1166
1167[  922.794412] usb 1-1: USB disconnect, device number 65
1168[  922.794441] usb 1-1.1: USB disconnect, device number 66
1169[  922.794857] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
1170[  922.797879] usb 1-1.3: USB disconnect, device number 67
1171[  923.594349] Indeed it is in host mode hprt0 = 00021501
1172[  923.964201] usb 1-1: new high-speed USB device number 68 using dwc_otg
1173[  923.964452] Indeed it is in host mode hprt0 = 00001101
1174[  924.364757] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
1175[  924.364785] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1176[  924.372177] hub 1-1:1.0: USB hub found
1177[  924.372420] hub 1-1:1.0: 5 ports detected
1178[  924.704263] usb 1-1.1: new high-speed USB device number 69 using dwc_otg
1179[  924.834821] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
1180[  924.834848] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1181[  924.838529] smsc95xx v1.0.6
1182[  924.937978] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
1183[  925.034250] usb 1-1.3: new high-speed USB device number 70 using dwc_otg
1184[  925.181413] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
1185[  925.181444] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1186[  925.181456] usb 1-1.3: Product: 802.11 n WLAN
1187[  925.181467] usb 1-1.3: Manufacturer: Ralink
1188[  925.181476] usb 1-1.3: SerialNumber: 1.0
1189[  925.287855] usb 1-1.3: reset high-speed USB device number 70 using dwc_otg
1190[  925.424283] ieee80211 phy22: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
1191[  925.601147] ieee80211 phy22: rt2x00_set_rf: Info - RF chipset 000f detected
1192[  925.623108] ieee80211 phy22: Selected rate control algorithm 'minstrel_ht'
1193[  926.559679] ieee80211 phy22: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
1194[  926.559911] ieee80211 phy22: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
1195[  927.303336] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
1196[  930.472163] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
1197[  930.473804] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
1198[  932.836741] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
1199[  934.025348] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
1200[  944.892512] wlan0: authenticate with e4:3e:d7:01:b8:03
1201[  945.039487] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
1202[  945.041420] wlan0: authenticated
1203[  945.055080] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
1204[  945.059553] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
1205[  945.082572] wlan0: associated
1206[  945.082854] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03
1207[  945.228822] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
1208
1209[  945.229624] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected
1210
1211[  945.244332] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
1212[  945.295968] usb 1-1: USB disconnect, device number 68
1213[  945.295998] usb 1-1.1: USB disconnect, device number 69
1214[  945.296423] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet
1215[  945.296527] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
1216[  945.315627] usb 1-1.3: USB disconnect, device number 70
1217[  945.809358] wlan0: deauthenticating from e4:3e:d7:01:b8:03 by local choice (Reason: 3=DEAUTH_LEAVING)
1218[  946.075280] Indeed it is in host mode hprt0 = 00021501
1219[  946.565189] usb 1-1: new high-speed USB device number 71 using dwc_otg
1220[  946.565436] Indeed it is in host mode hprt0 = 00001101
1221[  947.215679] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
1222[  947.215730] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1223[  947.220023] hub 1-1:1.0: USB hub found
1224[  947.220253] hub 1-1:1.0: 5 ports detected
1225[  947.555230] usb 1-1.1: new high-speed USB device number 72 using dwc_otg
1226[  947.685742] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
1227[  947.685769] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
1228[  947.705286] smsc95xx v1.0.6
1229[  947.816573] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d1:c8:31
1230[  947.915208] usb 1-1.3: new high-speed USB device number 73 using dwc_otg
1231[  948.062637] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
1232[  948.062666] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
1233[  948.062679] usb 1-1.3: Product: 802.11 n WLAN
1234[  948.062693] usb 1-1.3: Manufacturer: Ralink
1235[  948.062704] usb 1-1.3: SerialNumber: 1.0
1236[  948.175215] usb 1-1.3: reset high-speed USB device number 73 using dwc_otg
1237[  948.315354] ieee80211 phy23: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
1238[  948.488236] ieee80211 phy23: rt2x00_set_rf: Info - RF chipset 000f detected
1239[  948.500846] ieee80211 phy23: Selected rate control algorithm 'minstrel_ht'
1240[  948.558897] ieee80211 phy23: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
1241[  948.559157] ieee80211 phy23: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
1242[  949.416323] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
1243[  950.788996] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
1244[  950.791686] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
1245[  952.820066] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
1246[  962.458511] wlan0: authenticate with e4:3e:d7:01:b8:03
1247[  962.554686] wlan0: send auth to e4:3e:d7:01:b8:03 (try 1/3)
1248[  962.558974] wlan0: authenticated
1249[  962.567792] wlan0: associate with e4:3e:d7:01:b8:03 (try 1/3)
1250[  962.571958] wlan0: RX AssocResp from e4:3e:d7:01:b8:03 (capab=0x1411 status=0 aid=3)
1251[  962.594388] wlan0: associated
1252[  962.594482] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
1253[  962.619131] wlan0: Limiting TX power to 22 (22 - 0) dBm as advertised by e4:3e:d7:01:b8:03