· 6 years ago · Oct 01, 2019, 10:44 PM
1[ 0.000000] Booting Linux on physical CPU 0
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Linux version 3.4.108.20190506.1 (abuild@phost10) (gcc version 4.9.4 20160726 (Mer 4.9.4-1) (Linaro GCC 4.9-2017.01) ) #1 SMP PREEMPT Sat Jul 13 07:51:31 UTC 2019
4[ 0.000000] CPU: ARMv7 Processor [511f04d4] revision 4 (ARMv7), cr=10c5387d
5[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
6[ 0.000000] Machine: QCT MSM8930 CDP
7[ 0.000000] Ignoring unrecognised tag 0x54420003
8[ 0.000000] pwr_on_status=0 by string pwr_on_by_pwr_key
9[ 0.000000] memory pool 3 (start bf200000 size d00000) initialized
10[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
11[ 0.000000] socinfo_init: v7, id=142, ver=1.2, raw_id=1836, raw_ver=1836, hw_plat=0, hw_plat_ver=65536
12 accessory_chip=0, hw_plat_subtype=0, pmic_model=23, pmic_die_revision=2
13[ 0.000000] On node 0 totalpages: 215808
14[ 0.000000] free_area_init_node: node 0, pgdat c0f76640, node_mem_map c12df000
15[ 0.000000] Normal zone: 1520 pages used for memmap
16[ 0.000000] Normal zone: 0 pages reserved
17[ 0.000000] Normal zone: 150800 pages, LIFO batch:31
18[ 0.000000] HighMem zone: 522 pages used for memmap
19[ 0.000000] HighMem zone: 62966 pages, LIFO batch:15
20[ 0.000000] allocating 6266880 bytes at c22a2000 (824a2000 physical) for fb
21[ 0.000000] PERCPU: Embedded 9 pages/cpu @c289f000 s15552 r8192 d13120 u36864
22[ 0.000000] pcpu-alloc: s15552 r8192 d13120 u36864 alloc=9*4096
23[ 0.000000] pcpu-alloc: [0] 0 [0] 1
24[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 213766
25[ 0.000000] Kernel command line: androidboot.hardware=qcom user_debug=31 ehci-hcd.park=3 maxcpus=2 zram.num_devices=2 root=/dev/mmcblk0p28 androidboot.emmc=true androidboot.serialno=DU3BG00096 androidboot.baseband=msm project_id=3 androidboot.board_adc=1122 lcm=1 wlanmac=5056A8010CAD do_fsck=1 bootup_reason=0xFBF9FFAF wifibin=0 pwr_on_status=pwr_on_by_pwr_key emmc_wp_size=8388608 board_id=DVT0
26[ 0.000000] USB::android board_serialno_setup serialno=DU3BG00096 user_serial_string=DU3BG00096
27[ 0.000000] msm_project_id = 3
28[ 0.000000] from aboot, panel_exist = 1
29[ 0.000000] wifi_bin_index_setup: atag_wifi_bin_index = 0
30[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
31[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
32[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
33[ 0.000000] allocated 2091008 bytes of page_cgroup
34[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
35[ 0.000000] Memory: 140MB 4MB 3MB 1MB 254MB 441MB = 843MB total
36[ 0.000000] Memory: 825756k/825756k available, 111204k reserved, 253952K highmem
37[ 0.000000] Virtual kernel memory layout:
38 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
39 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
40 vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
41 lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
42 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
43 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
44 .text : 0xc0008000 - 0xc0c4bb04 (12559 kB)
45 .init : 0xc0d00000 - 0xc0e3ecc0 (1276 kB)
46 .data : 0xc0e40000 - 0xc0fa3af8 (1423 kB)
47 .bss : 0xc0fa3bfc - 0xc12daaf0 (3292 kB)
48[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
49[ 0.000000] Preemptible hierarchical RCU implementation.
50[ 0.000000] NR_IRQS:1177
51[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
52[ 0.000000] Console: colour dummy device 80x30
53[ 0.000000] console [tty0] enabled
54[ 0.000000] kmemleak: Kernel memory leak detector disabled
55[ 0.150190] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67690)
56[ 0.150251] pid_max: default: 32768 minimum: 301
57[ 0.150679] Mount-cache hash table entries: 512
58[ 0.152113] Initializing cgroup subsys debug
59[ 0.152144] Initializing cgroup subsys cpuacct
60[ 0.152144] Initializing cgroup subsys memory
61[ 0.152235] Initializing cgroup subsys devices
62[ 0.152266] Initializing cgroup subsys freezer
63[ 0.152266] Initializing cgroup subsys net_cls
64[ 0.152296] Initializing cgroup subsys blkio
65[ 0.152327] Initializing cgroup subsys perf_event
66[ 0.152388] Initializing cgroup subsys net_prio
67[ 0.152540] CPU: Testing write buffer coherency: ok
68[ 0.152784] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
69[ 0.152815] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
70[ 0.152937] Setting up static identity map for 0x80a9e770 - 0x80a9e7f8
71[ 0.156325] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
72[ 0.156447] Brought up 2 CPUs
73[ 0.156508] SMP: Total of 2 processors activated (27.07 BogoMIPS).
74[ 0.158126] devtmpfs: initialized
75[ 0.173111] dummy:
76[ 0.173569] NET: Registered protocol family 16
77[ 0.174698] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
78[ 0.177201] meminfo_init: smem ram ptable found: ver: 0 len: 6
79[ 0.177231] Found 2 memory banks grouped into 16 memory regions
80[ 0.177414] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
81[ 0.178208] msm_rpm_init: RPM firmware 3.0.16842945
82[ 0.178391] kernel_debuglevel_dir OK
83[ 0.198412] saw_probe: id=0, name=8038_s5
84[ 0.198779] saw_probe: id=1, name=8038_s6
85[ 0.199023] pm8038_probe: PMIC revision 1: PM8038 rev F2
86[ 0.199053] pm8038_probe: PMIC revision 2: PM8038 rev 09
87[ 0.199084] pm8038_probe: PMIC version: PM8038 ver 2.0
88[ 0.199084] pm8038_probe: PMIC Restart Reason: Triggered from KPD (power key press)
89[ 0.200213] gpiochip_add: registered GPIOs 152 to 163 on device: pm-gpio
90[ 0.200366] pm_gpio_probe: OK: base=152, ngpio=12
91[ 0.200579] gpiochip_add: registered GPIOs 190 to 195 on device: pm8xxx-mpp
92[ 0.200640] pm8xxx_mpp_probe: OK: base=190, ngpio=6
93[ 0.206928] msm_rpm_get_status(): Status id 433 not defined for target
94[ 0.206958] AXI: msm_bus_rpm_is_mem_interleaved(): Status read for interleaving returned: -22
95 Using interleaved memory by default
96[ 0.207202] msm_rpm_get_status(): Status id 433 not defined for target
97[ 0.207202] AXI: msm_bus_rpm_is_mem_interleaved(): Status read for interleaving returned: -22
98 Using interleaved memory by default
99[ 0.207477] msm_rpm_get_status(): Status id 433 not defined for target
100[ 0.207477] AXI: msm_bus_rpm_is_mem_interleaved(): Status read for interleaving returned: -22
101 Using interleaved memory by default
102[ 0.207721] msm_rpm_get_status(): Status id 433 not defined for target
103[ 0.207752] AXI: msm_bus_rpm_is_mem_interleaved(): Status read for interleaving returned: -22
104 Using interleaved memory by default
105[ 0.207965] msm_rpm_get_status(): Status id 433 not defined for target
106[ 0.207996] AXI: msm_bus_rpm_is_mem_interleaved(): Status read for interleaving returned: -22
107 Using interleaved memory by default
108[ 0.208911] GPIO 2 dir = 2 out buf = 0 out value = 0 pull = 0 vol sel 2 stren = 0 func = 0 inv = 0 dis = 0
109[ 0.208972] GPIO 7 dir = 2 out buf = 0 out value = 0 pull = 0 vol sel 2 stren = 0 func = 0 inv = 0 dis = 0
110[ 0.209034] GPIO 9 dir = 2 out buf = 0 out value = 0 pull = 0 vol sel 2 stren = 0 func = 0 inv = 0 dis = 0
111[ 0.209095] GPIO 10 dir = 2 out buf = 0 out value = 0 pull = 0 vol sel 2 stren = 0 func = 0 inv = 0 dis = 0
112[ 0.209156] GPIO 6 dir = 1 out buf = 0 out value = 0 pull = 5 vol sel 2 stren = 1 func = 2 inv = 0 dis = 0
113[ 0.209217] GPIO 4 dir = 1 out buf = 0 out value = 1 pull = 5 vol sel 0 stren = 1 func = 0 inv = 0 dis = 0
114[ 0.209278] system_rev = 0x300000
115[ 0.209308] GPIO 0 dir = 2 out buf = 0 out value = 0 pull = 0 vol sel 2 stren = 0 func = 0 inv = 0 dis = 1
116[ 0.209369] GPIO 1 dir = 2 out buf = 0 out value = 0 pull = 0 vol sel 2 stren = 0 func = 0 inv = 0 dis = 1
117[ 0.209430] GPIO 4 dir = 2 out buf = 0 out value = 0 pull = 0 vol sel 2 stren = 0 func = 0 inv = 0 dis = 1
118[ 0.209491] GPIO 5 dir = 2 out buf = 0 out value = 0 pull = 0 vol sel 2 stren = 0 func = 0 inv = 0 dis = 1
119[ 0.209552] GPIO 6 dir = 2 out buf = 0 out value = 0 pull = 0 vol sel 2 stren = 0 func = 0 inv = 0 dis = 1
120[ 0.209613] GPIO 9 dir = 2 out buf = 0 out value = 0 pull = 0 vol sel 2 stren = 0 func = 0 inv = 0 dis = 1
121[ 0.209674] GPIO 10 dir = 2 out buf = 0 out value = 0 pull = 0 vol sel 2 stren = 0 func = 0 inv = 0 dis = 1
122[ 0.209735] GPIO 11 dir = 2 out buf = 0 out value = 0 pull = 0 vol sel 2 stren = 0 func = 0 inv = 0 dis = 1
123[ 0.216542] ------------[ cut here ]------------
124[ 0.216572] WARNING: at arch/arm/mach-msm/subsystem_restart.c:799 subsys_restart_init+0x118/0x144()
125[ 0.216603] Modules linked in:
126[ 0.216633] [<c010b75c>] (unwind_backtrace+0x0/0x118) from [<c0173890>] (warn_slowpath_common+0x4c/0x64)
127[ 0.216694] [<c0173890>] (warn_slowpath_common+0x4c/0x64) from [<c0173938>] (warn_slowpath_null+0x18/0x20)
128[ 0.216725] [<c0173938>] (warn_slowpath_null+0x18/0x20) from [<c0d0bd40>] (subsys_restart_init+0x118/0x144)
129[ 0.216755] [<c0d0bd40>] (subsys_restart_init+0x118/0x144) from [<c01005b0>] (do_one_initcall+0x8c/0x150)
130[ 0.216816] [<c01005b0>] (do_one_initcall+0x8c/0x150) from [<c0d00944>] (kernel_init+0x100/0x1bc)
131[ 0.216847] [<c0d00944>] (kernel_init+0x100/0x1bc) from [<c01067d8>] (kernel_thread_exit+0x0/0x8)
132[ 0.216908] ---[ end trace da227214a82491b7 ]---
133[ 0.221699] sps:BAM 0x12244000 is registered.
134[ 0.222279] sps:sps is ready.
135[ 0.255028] bio: create slab <bio-0> at 0
136[ 0.256249] vgaarb: loaded
137[ 0.256554] ION heap vmalloc created
138[ 0.256584] ION heap mm created at a0000000 with size 3800000
139[ 0.256615] ION heap mm_fw created at 9fe00000 with size 1e0000
140[ 0.256676] ION heap mfc created at a3800000 with size 2000
141[ 0.256706] ION heap iommu created
142[ 0.256767] ION heap qsecom created at bf203000 with size 780000
143[ 0.256798] ION heap audio created at bf983000 with size 408000
144[ 0.257683] pm8xxx_pwm_probe: OK
145[ 0.258385] SCSI subsystem initialized
146[ 0.258507] platform msm_slim_ctrl.1: Driver msm_slim_ctrl requests probe deferral
147[ 0.258904] usbcore: registered new interface driver usbfs
148[ 0.259026] usbcore: registered new interface driver hub
149[ 0.259179] usbcore: registered new device driver usb
150[ 0.259331] Linux media interface: v0.10
151[ 0.259392] Linux video capture interface: v2.00
152[ 0.259697] BootLog, +pm8xxx_led_init
153[ 0.260033] Registered led device: wled
154[ 0.260216] Registered led device: led:rgb_red
155[ 0.260491] Registered led device: led:rgb_green
156[ 0.260796] Registered led device: led:rgb_blue
157[ 0.261223] BootLog, -pm8xxx_led_init, ret=0
158[ 0.261712] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
159[ 0.261864] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
160[ 0.262017] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
161[ 0.262169] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
162[ 0.262322] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
163[ 0.262475] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
164[ 0.262597] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
165[ 0.262749] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
166[ 0.262902] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
167[ 0.263299] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
168[ 0.263482] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
169[ 0.263665] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
170[ 0.263879] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
171[ 0.264062] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
172[ 0.264245] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
173[ 0.264428] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
174[ 0.264611] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
175[ 0.264764] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
176[ 0.264916] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
177[ 0.265130] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
178[ 0.265283] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
179[ 0.265466] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
180[ 0.265679] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
181[ 0.265893] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
182[ 0.266107] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
183[ 0.266351] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
184[ 0.266503] Advanced Linux Sound Architecture Driver Version 1.0.25.
185[ 0.267114] BootLog, +bt_init
186[ 0.267144] Bluetooth: Core ver 2.16
187[ 0.267205] NET: Registered protocol family 31
188[ 0.267205] Bluetooth: HCI device and connection manager initialized
189[ 0.267236] Bluetooth: HCI socket layer initialized
190[ 0.267266] Bluetooth: L2CAP socket layer initialized
191[ 0.267511] Bluetooth: SCO socket layer initialized
192[ 0.267541] BootLog, -bt_init, ret=0
193[ 0.267755] nfc: nfc_init: NFC Core ver 0.1
194[ 0.267816] NET: Registered protocol family 39
195[ 0.268762] Switching to clocksource gp_timer
196[ 0.306943] NET: Registered protocol family 2
197[ 0.316130] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
198[ 0.316770] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
199[ 0.317991] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
200[ 0.318663] TCP: Hash tables configured (established 131072 bind 65536)
201[ 0.318693] TCP: reno registered
202[ 0.318724] UDP hash table entries: 512 (order: 2, 16384 bytes)
203[ 0.318754] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
204[ 0.319243] NET: Registered protocol family 1
205[ 0.319273] PCI: CLS 0 bytes, default 64
206[ 0.319548] Trying to unpack rootfs image as initramfs...
207[ 0.501358] Freeing initrd memory: 2692K
208[ 0.503067] Detected 5 counters on the L2CC PMU.
209[ 0.504593] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
210[ 0.506180] pil_qdsp6v4 pil_qdsp6v4.1: using secure boot
211[ 0.507675] pil_qdsp6v4 pil_qdsp6v4.2: using secure boot
212[ 0.509537] pil_riva pil_riva: using secure boot
213[ 0.513871] smd_channel_probe_worker: allocation table not initialized
214[ 0.524217] NET: Registered protocol family 27
215[ 0.525103] dspcrashd_probe: Platform driver values: Base = 0x8da00000, Size = 0x1800000,pdata = 0xdeaddead
216[ 0.529864] modem_8960_init: modem fatal driver init'ed.
217[ 0.530413] lpass_fatal_init: lpass SSR driver init'ed.
218[ 0.530444] BootLog, +riva_ssr_module_init
219[ 0.530901] wcnss_8960: module initialized
220[ 0.530932] BootLog, -riva_ssr_module_init, ret=0
221[ 0.532427] acpuclk-8930aa acpuclk-8930aa: SPEED BIN: 0
222[ 0.532458] acpuclk-8930aa acpuclk-8930aa: ACPU PVS: 1
223[ 0.533984] acpuclk-8930aa acpuclk-8930aa: CPU0: 20 frequencies supported
224[ 0.534045] acpuclk-8930aa acpuclk-8930aa: CPU1: 20 frequencies supported
225[ 0.536151] msm_rpm_log_probe: OK
226[ 0.537891] msm_iommu_dev: Could not find context <jpegd_src>
227[ 0.538013] msm_iommu_dev: Could not find context <jpegd_dst>
228[ 0.541461] usbcore: registered new interface driver hsic_sysmon
229[ 0.912131] highmem bounce pool size: 64 pages
230[ 0.931603] fuse init (API version 7.20)
231[ 0.934777] Btrfs loaded
232[ 0.934869] msgmni has been set to 1122
233[ 0.939081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
234[ 0.939142] io scheduler noop registered
235[ 0.939233] io scheduler deadline registered
236[ 0.939356] io scheduler cfq registered (default)
237[ 0.946955] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1800000
238[ 0.947016] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf0098000
239[ 0.947321] mipi_truly_otm9608a_lcd_init: SUCCESS (WLED TRIGGER)
240[ 0.947749] -- lcd create kernel debuglevel --
241[ 0.948298] setting pdata->panel_info.fb_num to 3. type: 9
242[ 0.954127] FrameBuffer[0] 540x960 size=6266880 bytes is registered successfully!
243[ 0.954890] Registered led device: lcd-backlight
244[ 0.955348] init LCM RECOVERY DELAYED_WORK
245[ 0.956203] setting pdata->panel_info.fb_num to 1. type: 10
246[ 0.956538] Inside writeback_driver_init
247[ 0.956935] Inside writeback_probe
248[ 0.958003] FrameBuffer[1] 1280x720 size=0 bytes is registered successfully!
249[ 0.960720]
250 msm_vidc_enc: Inside vid_enc_init()
251[ 0.961117]
252 msm_vidc_enc: Inside vid_enc_vcd_init()
253[ 0.962093] Console does not enable
254[ 0.962307] msm_serial_hsl: detected port #0
255[ 0.962582] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16440000 (irq = 186) is a MSM
256[ 0.963100] msm_serial_hsl: detected port #1
257[ 0.963314] msm_serial_hsl.1: ttyHSL1 at MMIO 0x16640000 (irq = 190) is a MSM
258[ 0.964138] msm_serial_hsl: driver initialized
259[ 0.966366] msm_rotator_probe: rotator_hw_revision=2
260[ 0.969571] diagchar initialized now
261[ 0.970883] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
262[ 0.982389] brd: module loaded
263[ 0.987852] loop: module loaded
264[ 0.989989] misc memnotify: update period set to 250 ms or 25 jiffies
265[ 0.990019] misc memnotify: update period limit set to 15000 ms or 1500 jiffies
266[ 0.990019] misc memnotify: update space set to 0 kb or -+1618 pages
267[ 0.990050] misc memnotify: 207112 available pages found (207112 ram + 0 swap)
268[ 0.990050] misc memnotify: 1944 used pages, utilization 0 percents
269[ 0.990080] misc memnotify: 14 active pages, utilization 0 percents
270[ 0.990080] misc memnotify: 207112 total pages, utilization 100 percents
271[ 0.990080] misc memnotify: 0 swap_total pages, utilization 0 percents
272[ 0.990111] misc memnotify: 0 swap_free pages, utilization 0 percents
273[ 0.990111] misc memnotify: overhead per client connection is 40 bytes
274[ 0.990111] +BootLog, ftd_debugfs_misc_init
275[ 0.990172] [rk] ddr size=1024 MB
276[ 0.990202] [rk] manufacturer id of ddr=255
277[ 0.990233] -BootLog, ftd_debugfs_misc_init
278[ 0.990782] i2c-core: driver [tabla-i2c-core] using legacy suspend method
279[ 0.990813] i2c-core: driver [tabla-i2c-core] using legacy resume method
280[ 1.054600] pn544_probe: (0) send(0x28) to pn544, ret(1)
281[ 1.054906] pn544_probe: (0) recv(0x51) from pn544, ret(1)
282[ 1.054936] [NFC]PN544 probe : misc devices setting....
283[ 1.055150] [NFC]PN544 probe : IRQ setting....
284[ 1.055424] PN544_DEBUG_DLL(0)
285[ 1.149336] pn544_probe success!!
286[ 1.149427] pn544_init initialize success!
287[ 1.150221] SCSI Media Changer driver v0.25
288[ 1.150312] tun: Universal TUN/TAP device driver, 1.6
289[ 1.150343] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
290[ 1.150648] rmnet_init: BAM devices[8]
291[ 1.156691] PPP generic driver version 2.4.2
292[ 1.156996] PPP BSD Compression module registered
293[ 1.157027] PPP Deflate Compression module registered
294[ 1.158278] PPP MPPE Compression module registered
295[ 1.158309] NET: Registered protocol family 24
296[ 1.158370] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
297[ 1.158400] CSLIP: code copyright 1989 Regents of the University of California.
298[ 1.158431] BootLog, +wcnss_wlan_init
299[ 1.158583] wcnss_wlan probed in built-in mode
300[ 1.159591] BootLog, -wcnss_wlan_init, ret=0
301[ 1.159713] usbcore: registered new interface driver cdc_ether
302[ 1.160079] usbcore: registered new interface driver cdc_ncm
303[ 1.160292] usbcore: registered new interface driver rmnet_usb
304[ 1.161635] rmnet usb ctrl Initialized.
305[ 1.162093] BootLog,+USB msm_otg_probe
306[ 1.162276] msm_otg msm_otg: OTG regs = f00a8000
307[ 1.164932] usb wake lock get!!!
308[ 1.165206] [BAT]pm8921_charger_register_vbus_sn
309[ 1.165298] BootLog -USB msm_otg_probe
310[ 1.165450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
311[ 1.165695] msm_otg msm_otg: host driver registered w/ tranceiver
312[ 1.166549] usbcore: registered new interface driver cdc_acm
313[ 1.166580] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
314[ 1.166763] usbcore: registered new interface driver usbserial
315[ 1.166763] usbserial: USB Serial Driver core
316[ 1.166854] usbcore: registered new interface driver qc_csvt
317[ 1.166946] USB Serial support registered for qc_csvt
318[ 1.167037] usbcore: registered new interface driver usb_ehset_test
319[ 1.167129] usbcore: registered new interface driver diag_bridge
320[ 1.167282] usbcore: registered new interface driver mdm_bridge
321[ 1.167923] usbcore: registered new interface driver ks_bridge
322[ 1.167953] ksb_init: init done
323[ 1.168136] BootLog,+USB ci13xxx_msm_probe
324[ 1.168258] USB::otg msm_otg_set_peripheral peripheral driver registered w/ tranceiver
325[ 1.168319] USB::otg msm_otg_sm_work UNDEFINED work
326[ 1.168777] BootLog -USB ci13xxx_msm_probe ret=0
327[ 1.168960] BootLog,+USB init
328[ 1.169540] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
329[ 1.169845] mbim_init: initialize 1 instances
330[ 1.170090] mbim_init: Initialized 1 ports
331[ 1.172684] UMS::fsg_common_init 0 : cdrom =0
332[ 1.172867] android_usb gadget: Mass Storage Function, version: 2009/09/11
333[ 1.172897] android_usb gadget: Number of LUNs=1
334[ 1.172928] lun0: LUN: removable file: (no medium)
335[ 1.173508] USB::android hid_function_init
336[ 1.173721] functionfs_init: file system registered
337[ 1.173752] android_usb gadget: android_usb ready
338[ 1.173935] BootLog,-USB init ret=0
339[ 1.173966] uether::gether_init
340[ 1.174729] mousedev: PS/2 mouse device common for all mice
341[ 1.175583] BootLog, +touchpad_init
342[ 1.175614] [TP] SYNAPTICS RMI4 Touchscreen Driver
343[ 1.175675] [TP] [PM_LOG]register pm log for touch driver.
344[ 1.175736] [TP] Success to configure gpio_vendor_id:93 gpio_name:ft5316_ts_vendor_id
345[ 1.239340] [TP] power on device successfully.
346[ 1.299435] USB::otg msm_otg_init_sm set ID
347[ 1.379856] [TP] touch:F1A_query_base [0xe9]:0x1f
348[ 1.379887] [TP] touch:F1A_command_base [0xea]:0x0
349[ 1.379917] [TP] touch:FA1_control_base [0xeb]:0x1
350[ 1.379917] [TP] touch:F1A_data_base [0xec]:0x0
351[ 1.379948] [TP] touch:F1A_version_interrupt_count [0xed]:0x1
352[ 1.379978] [TP] touch:F1A_function_exists [0xee]:0x1a
353[ 1.380283] [TP] touch:reserved register value[0xe8]:0x0
354[ 1.419410] [TP] touch:check TPK or JTouch module.
355[ 1.419655] [TP] touch:fw version:1421304
356[ 1.419929] [TP] touch:config id:0x4f423630
357[ 1.420143] [TP] touch: the F34_Flash_cmd[0x12]:0x0
358[ 1.420570] [TP] touch:product id:[SAP_OF_B11]
359[ 1.420601] [TP] touch: in UI mode, module_tp:[0x4f42]
360[ 1.420601] [TP] touch:get the 3rd and 4th of config id:[0x3630]
361[ 1.420631] [TP] This is the O-film black TP.
362[ 1.420875] [TP] touch:fw version:1421304
363[ 1.421150] [TP] touch:config id:0x4f423630
364[ 1.421150] [TP] touch:successfully upgrade tp module. (rc=0)
365[ 1.421577] [TP] total number of TX(12) * RX(21) channels
366[ 1.439920] input: touch_synaptics as /devices/i2c-3/3-0020/input/input0
367[ 1.440408] input: capkey_synaptics as /devices/i2c-3/3-0020/input/input1
368[ 1.441080] [TP] touch:Start Probe PASS
369[ 1.441202] BootLog, -touchpad_init, rc=0
370[ 1.441233] [TP] BootLog, ft5316_init +
371[ 1.441233] [TP] FocalTech ft5316 Touch Driver (Built Jul 13 2019 @ 07:46:17)
372[ 1.441263] [TP] BootLog, ft5316_init -, rc=0
373[ 1.441629] input: pm8xxx_vib_ffmemless as /devices/platform/msm_ssbi.0/pm8038-core/pm8xxx-vib/input/input2
374[ 1.442392] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8038-core/pm8xxx-pwrkey/input/input3
375[ 1.443461] input: toh-event as /devices/virtual/input/input4
376[ 1.446299] at24 1-0050: 2048 byte at24 EEPROM, read-only, 0 bytes/write
377[ 1.529620] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1300c8, irq:179
378[ 1.529681] qup_i2c qup_i2c.1: I2C slave addr:0x50 not connected
379[ 1.549519] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1300c8, irq:179
380[ 1.549610] qup_i2c qup_i2c.1: I2C slave addr:0x50 not connected
381[ 1.569510] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1300c8, irq:179
382[ 1.569601] qup_i2c qup_i2c.1: I2C slave addr:0x50 not connected
383[ 1.679932] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1300c8, irq:179
384[ 1.679993] qup_i2c qup_i2c.1: I2C slave addr:0x50 not connected
385[ 1.699526] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1300c8, irq:179
386[ 1.699587] qup_i2c qup_i2c.1: I2C slave addr:0x50 not connected
387[ 1.719548] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1300c8, irq:179
388[ 1.719609] qup_i2c qup_i2c.1: I2C slave addr:0x50 not connected
389[ 1.829543] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1300c8, irq:179
390[ 1.829635] qup_i2c qup_i2c.1: I2C slave addr:0x50 not connected
391[ 1.849565] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1300c8, irq:179
392[ 1.849626] qup_i2c qup_i2c.1: I2C slave addr:0x50 not connected
393[ 1.869555] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1300c8, irq:179
394[ 1.869616] qup_i2c qup_i2c.1: I2C slave addr:0x50 not connected
395[ 1.979581] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1300c8, irq:179
396[ 1.979642] qup_i2c qup_i2c.1: I2C slave addr:0x50 not connected
397[ 1.999572] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1300c8, irq:179
398[ 1.999664] qup_i2c qup_i2c.1: I2C slave addr:0x50 not connected
399[ 2.019990] qup_i2c qup_i2c.1: QUP: I2C status flags :0x1300c8, irq:179
400[ 2.020051] qup_i2c qup_i2c.1: I2C slave addr:0x50 not connected
401[ 2.039554] toh-core toh-core.0: No valid eeprom present
402[ 2.041202] using rtc device, pm8xxx_rtc, for alarms
403[ 2.041233] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
404[ 2.041629] i2c /dev entries driver
405[ 2.043155] usbcore: registered new interface driver uvcvideo
406[ 2.043186] USB Video Class driver (1.1.1)
407[ 2.044742] [CAM]msm_sensor_ftd_init+
408[ 2.044864] [CAM]msm_sensor_ftd_init-
409[ 2.044956] [CAM]msm_sensor_i2c_probe, msm_project_id=3, system_rev=0x300000
410[ 2.044987] [CAM]msm_sensor_i2c_probe, id 8825, use vreg_seq
411[ 2.045017] [CAM]msm_sensor_power_up: BACK_CAMERA
412[ 2.045200] [CAM]msm_camera_enable_vreg, On, CAM_VIO , 1ms
413[ 2.047733] [CAM]msm_camera_enable_vreg, On, CAM_VANA_EXT, 5ms
414[ 2.071326] msm_sensor_match_id: read id: 8825 expected id 8825:
415[ 2.071356] [CAM]msm_sensor_match_id, Back = 8825 (ov8825)
416[ 2.071509] msm_sensor_delay_frames fps = 0, delay = 0, min_delay 0
417[ 2.094338] ov8825_check_otp_wb, index = 0, bank = 0x0, address:0x3d05, temp = 0x2
418[ 2.117442] ov8825_read_otp, tempBank:oxa, tempaddr:0x3d00
419[ 2.129864] ov8825_read_otp_lsc, i = 0, flag:0x40
420[ 2.129894] ov8825_read_otp_lsc, the shading data is stored in bank 2, flag:0x40
421 ov8825_read_otp, tempBank:oxa, tempaddr:0x3d01
422[ 2.179520] ov8825_read_otp, tempBank:oxb, tempaddr:0x3d00
423[ 2.229543] ov8825_read_otp, tempBank:oxe, tempaddr:0x3d00
424[ 2.249870] ov8825_read_otp_af, i = 0, flag:0x5
425[ 2.249900] ov8825_read_otp_af, the af data is stored in address 0x3d00, flag:0x5
426 ov8825_read_otp, tempBank:oxe, tempaddr:0x3d01
427[ 2.270441] msm_sensor_i2c_probe ov8825 probe succeeded
428[ 2.270593] [CAM]msm_actuator_i2c_probe, addr=0x15
429[ 2.270654] msm_eeprom_probe probe_fail
430[ 2.271417] msm_server_update_sensor_info mctl_node_name[0] = video1
431[ 2.271814] [CAM]msm_sensor_power_down: BACK_CAMERA
432[ 2.271844] sensor_state:0
433[ 2.271875] [CAM]msm_camera_enable_vreg, Off, CAM_VANA_EXT, 5ms
434[ 2.277949] [CAM]msm_camera_enable_vreg, Off, CAM_VIO , 1ms
435[ 2.280573] [CAM][PM_LOG]BACK_CAMERA, device= EEC6F980
436[ 2.280756] [CAM]msm_sensor_i2c_probe, msm_project_id=3, system_rev=0x300000
437[ 2.280787] [CAM]msm_sensor_i2c_probe, bypass IMX091
438[ 2.280940] [CAM]msm_sensor_i2c_probe, msm_project_id=3, system_rev=0x300000
439[ 2.280970] [CAM]msm_sensor_i2c_probe, id 2656, use vreg_seq
440[ 2.280970] [CAM]msm_sensor_power_up: FRONT_CAMERA
441[ 2.281153] [CAM]msm_camera_enable_vreg, On, CAM_VIO , 1ms
442[ 2.283656] [CAM]msm_camera_enable_vreg, On, CAM_VANA_EXT, 5ms
443[ 2.303952] msm_sensor_match_id: read id: 2656 expected id 2656:
444[ 2.303982] [CAM]msm_sensor_match_id, Front = 2656 (ov2675)
445[ 2.305234] ov2675_read_fuse_id, buf is 112522041092
446
447[ 2.305600] msm_sensor_i2c_probe ov2675 probe succeeded
448[ 2.305631] msm_eeprom_probe probe_fail
449[ 2.306363] msm_server_update_sensor_info mctl_node_name[1] = video3
450[ 2.306668] [CAM]msm_sensor_power_down: FRONT_CAMERA
451[ 2.306699] sensor_state:0
452[ 2.306729] [CAM]msm_camera_enable_vreg, Off, CAM_VANA_EXT, 5ms
453[ 2.312772] [CAM]msm_camera_enable_vreg, Off, CAM_VIO , 1ms
454[ 2.315367] [CAM][PM_LOG]FRONT_CAMERA, device = EEC9B600
455[ 2.316831] msm_cam_server_request_irq IRQ Router hw is not present.
456[ 2.317137] msm_cam_server_request_irq IRQ Router hw is not present.
457[ 2.318815] msm_cam_server_request_irq IRQ Router hw is not present. BootLog, +adp1650_init
458[ 2.320555] adp1650_i2c_probe+, client=adp1650, id=adp1650, adapter=QUP I2C adapter
459[ 2.343995] [FLASH]adp1650_i2c_probe R00_09 = 22 FF 0F 73 A4 00 66 24 00 D0
460[ 2.344025] [FLASH]adp1650_i2c_probe-, ret=0
461[ 2.344147] [FLASH]adp1650_create_debugfs_entries++
462
463[ 2.344208] BootLog, -adp1650_init, ret=0
464[ 2.370212] pm8xxx_tm_probe: OK
465[ 2.371890] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
466[ 2.372409] Bluetooth: HCI UART driver ver 2.2
467[ 2.372440] Bluetooth: HCI H4 protocol initialized
468[ 2.372440] Bluetooth: HCIATH3K protocol initialized
469[ 2.372745] Bluetooth: HCI_IBS protocol initialized
470[ 2.372775] Error: Driver 'bt_power' is already registered, aborting...
471[ 2.373142] cpuidle: using governor ladder
472[ 2.373172] cpuidle: using governor menu
473[ 2.373264] BootLog, +msmsdcc_init
474[ 2.373294] BootLog, -msmsdcc_init, ret=0
475[ 2.373691] mmc0: SDCC Version: 0x0000001a
476[ 2.375278] mmc0: bam physical base=0x12402000
477[ 2.375309] mmc0: bam virtual base=0xf00bc000
478[ 2.375339] sps:BAM 0x12402000 is registered.
479[ 2.375370] mmc0: BAM device registered. bam_handle=0xeecd0000
480[ 2.375949] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
481[ 2.376010] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
482[ 2.376072] mmc0: No card detect facilities available
483[ 2.378635] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
484[ 2.378666] mmc0: Controller capabilities: 0x0000039e
485[ 2.378696] mmc0: 8 bit data mode enabled
486[ 2.378727] mmc0: 4 bit data mode disabled
487[ 2.378727] mmc0: polling status mode disabled
488[ 2.378757] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
489[ 2.378788] mmc0: Slot eject status = 0
490[ 2.378788] mmc0: Power save feature enable = 1
491[ 2.378818] mmc0: SPS-BAM data transfer mode available
492[ 2.379093] mmc1: SDCC Version: 0x0000001a
493[ 2.384831] mmc1: bam physical base=0x12182000
494[ 2.384861] mmc1: bam virtual base=0xf00f8000
495[ 2.384892] sps:BAM 0x12182000 is registered.
496[ 2.384922] mmc1: BAM device registered. bam_handle=0xeecd0800
497[ 2.385472] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128
498[ 2.385533] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800
499[ 2.387211] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,382 dma -1 dmacrcri -1
500[ 2.387242] mmc1: Controller capabilities: 0x0000039e
501[ 2.387242] mmc1: 8 bit data mode disabled
502[ 2.387273] mmc1: 4 bit data mode enabled
503[ 2.387303] mmc1: polling status mode disabled
504[ 2.387303] mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz
505[ 2.387334] mmc1: Slot eject status = 0
506[ 2.387364] mmc1: Power save feature enable = 1
507[ 2.387364] mmc1: SPS-BAM data transfer mode available
508[ 2.387883] usbcore: registered new interface driver usbhid
509[ 2.387913] usbhid: USB HID core driver
510[ 2.387944] zram: Creating 2 devices ...
511[ 2.390965] ashmem: initialized
512[ 2.391301] logger: created 1024K log 'log_main'
513[ 2.391606] logger: created 256K log 'log_events'
514[ 2.391912] logger: created 512K log 'log_radio'
515[ 2.392247] logger: created 256K log 'log_system'
516[ 2.394964] coresight-tpiu coresight-tpiu.0: TPIU initialized
517[ 2.395940] coresight-etb coresight-etb.0: ETB initialized
518[ 2.396642] coresight-funnel coresight-funnel.0: FUNNEL initialized
519[ 2.398321] coresight-etm coresight-etm.0: ETM initialized
520[ 2.398870] coresight-etm coresight-etm.1: ETM initialized
521[ 2.399999] usbcore: registered new interface driver snd-usb-audio
522[ 2.401434] BootLog, +sitar_codec_init
523[ 2.401861] BootLog, -sitar_codec_init, ret=0
524[ 2.404730] msm_pcm_probe: dev name msm-voip-dsp
525[ 2.406622] msm_pcm_probe: dev name msm-pcm-dsp
526[ 2.407202] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
527[ 2.407691] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
528[ 2.409217] msm_compr_probe: dev name msm-compr-dsp
529[ 2.410193] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
530[ 2.410407] BootLog, +msm_soc_platform_init
531[ 2.410895] BootLog, -msm_soc_platform_init, ret=0
532[ 2.410956] msm_audio_init: Not APQ8064 in SLIMBUS mode
533[ 2.410987] BootLog, +msm8930_audio_init
534[ 2.411780] BootLog, -msm8930_audio_init, ret=0
535[ 2.411841] msm_audio_init: Not the right machine type
536[ 2.411872] msm_audio_init: Not APQ8064 in I2S mode
537[ 2.413245] oprofile: using arm/armv7-krait
538[ 2.413551] u32 classifier
539[ 2.413581] Actions configured
540[ 2.413642] Netfilter messages via NETLINK v0.30.
541[ 2.413703] nfnl_acct: registering with nfnetlink.
542[ 2.413825] nf_conntrack version 0.5.0 (12944 buckets, 51776 max)
543[ 2.415351] ctnetlink v0.93: registering with nfnetlink.
544[ 2.415473] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
545[ 2.415534] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
546[ 2.416145] xt_time: kernel timezone is -0000
547[ 2.417030] ip_tables: (C) 2000-2006 Netfilter Core Team
548[ 2.417671] arp_tables: (C) 2002 David S. Miller
549[ 2.417854] TCP: cubic registered
550[ 2.419258] NET: Registered protocol family 10
551[ 2.423622] Mobile IPv6
552[ 2.423714] ip6_tables: (C) 2000-2006 Netfilter Core Team
553[ 2.424294] IPv6 over IPv4 tunneling driver
554[ 2.425606] NET: Registered protocol family 17
555[ 2.425698] NET: Registered protocol family 15
556[ 2.425972] Bridge firewalling registered
557[ 2.429665] Bluetooth: RFCOMM TTY layer initialized
558[ 2.429757] Bluetooth: RFCOMM socket layer initialized
559[ 2.429787] Bluetooth: RFCOMM ver 1.11
560[ 2.429848] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
561[ 2.429879] Bluetooth: BNEP filters: protocol multicast
562[ 2.429909] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
563[ 2.430123] Registering the dns_resolver key type
564[ 2.434793] VFP support v0.3: implementor 51 architecture 64 part 4d variant 1 rev 4
565[ 2.434945] Registering SWP/SWPB emulation handler
566[ 2.460369] clock_late_init: Removing enables held for handed-off clocks
567[ 2.476575] registered taskstats version 1
568[ 2.477094] sps:BAM 0x28084000 is registered.
569[ 2.477643] sitar-slim sitar-slim: Platform data from board file
570[ 2.478956] slimbus laddr:0x0, EAPC:0x1:0x40
571[ 2.479017] slimbus laddr:0x1, EAPC:0x0:0x40
572[ 2.500015] mmc0: new HS200 MMC card at address 0001
573[ 2.500045] mmc0: mmc_can_sanitize card is yes
574[ 2.500503] mmcblk0: mmc0:0001 MAG2GC 14.5 GiB
575[ 2.505753] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28
576[ 2.479047] slimbus laddr:0x2, EAPC:0x5:0x40
577[ 2.510453] slimbus laddr:0x3, EAPC:0x1:0x70
578[ 2.640164] wcd9xxx_slim_probe: failed to get slimbus sitar-slim logical address: -6
579[ 2.643949] sitar1p1-slim sitar1p1-slim: Platform data from board file
580[ 2.510483] slimbus laddr:0x4, EAPC:0x0:0x70
581[ 2.670441] slimbus laddr:0x3, EAPC:0x1:0x70
582[ 2.670471] slimbus laddr:0x4, EAPC:0x0:0x70
583[ 2.705569] wcd9xxx_check_codec_type: codec is sitar_codec
584[ 2.705600] wcd9xxx_check_codec_type: Read codec idbytes & version
585 byte_0[00000002] byte_1[00000000] byte_2[00000001]
586 byte_3[00000001] version = 2
587[ 2.705814] sitar_probe
588[ 2.708408] [snd]sitar_codec_probe : Sitar version reg 0x22
589[ 2.708408] [snd]sitar_codec_probe : Sitar version 2
590[ 2.723882] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
591[ 2.724187] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
592[ 2.724492] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
593[ 2.724828] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
594[ 2.725103] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
595[ 2.725377] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
596[ 2.725682] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
597[ 2.725927] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
598[ 2.726262] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
599[ 2.726598] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
600[ 2.726934] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
601[ 2.727178] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
602[ 2.727483] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
603[ 2.727788] asoc: snd-soc-dummy-dai <-> SGLTE mapping ok
604[ 2.728063] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
605[ 2.732183] sitar_mbhc_init(): ENTER
606[ 2.875049] [snd]GPIO(1):removed,
607[ 2.875110] asoc: sitar_rx1 <-> msm-dai-q6.16384 mapping ok
608[ 2.875171] sitar_codec sitar_codec: ASoC: Failed to create Digital Mic1 debugfs file
609[ 2.876148] asoc: sitar_tx1 <-> msm-dai-q6.16385 mapping ok
610[ 2.876392] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
611[ 2.876606] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
612[ 2.876850] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
613[ 2.877063] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
614[ 2.877277] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
615[ 2.877491] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
616[ 2.877735] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
617[ 2.878040] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
618[ 2.878315] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
619[ 2.878589] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
620[ 2.878834] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
621[ 2.879139] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
622[ 2.880115] input: msm8930-sitar-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input5
623[ 2.880390] input: msm8930-sitar-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input6
624[ 2.896322] mmc1: host does not support reading read-only switch. assuming write-enable.
625[ 2.899008] mmc1: new ultra high speed SDR25 SDHC card at address 59b4
626[ 2.899008] mmc1: mmc_can_sanitize card is no
627[ 2.899374] mmcblk1: mmc1:59b4 NCard 14.7 GiB
628[ 2.904043] mmcblk1: p1
629[ 3.385502] Bosch Sensortec Device detected!
630 BMA255 registered I2C driver!
631[ 3.387669] input: bma2x2 as /devices/virtual/input/input7
632[ 3.387974] i2c-core: driver [bma2x2] using legacy suspend method
633[ 3.387974] i2c-core: driver [bma2x2] using legacy resume method
634[ 3.388005] BootLog, +BMM_init
635[ 3.388066]
636 [I]<6><><bmm_probe><1052>function entrance
637[ 3.388066]
638 [I]<6><><bmm_wakeup><183>waking up the chip...
639[ 3.389348]
640 [I]<6><><bmm_wakeup><199>wake up result: succeed, tried times: 1
641[ 3.389378]
642 [I]<6><><bmm_probe><1076>register dump after waking up
643[ 3.389409] 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
644
645[ 3.391027] 32 05 01 00 ff ff ff ff ff ff ff ff ff ff ff ff
646 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
647 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
648 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
649
650[ 3.391179]
651 [I]<6><><bmm_check_chip_id><140>read chip id result: 0x32
652[ 3.391179]
653 [N]<5><><bmm_probe><1081>Bosch Sensortec Device bmm050 detected
654[ 3.391301] input: bmm050 as /devices/virtual/input/input8
655[ 3.396001] 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
656
657[ 3.397649] 32 05 01 00 01 00 01 00 00 00 00 01 06 3f 07 00
658 00 04 0f ff 00 1f b4 44 00 98 46 63 4e 00 00 00
659 84 4d 00 00 1a 1a 12 00 ff 02 68 54 ae 1b 00 00
660 fd 1d ff ff ff ff ff ff ff ff ff ff ff ff ff ff
661
662[ 3.397894]
663 [N]<5><><bmm_probe><1173>sensor bmm050 probed successfully
664[ 3.397985] BootLog, -BMM_init, ret=0
665[ 3.397985] l3gd20_gyr: gyroscope sysfs driver init
666[ 3.398016] BootLog, +l3gd20_gyr_init
667[ 3.398046] l3gd20_gyr 12-006a: probe start.
668[ 3.398168] l3gd20_gyr 12-006a: using default plaform_data
669[ 3.398199] l3gd20_gyr 12-006a: polling mode enabled
670[ 3.398199] l3gd20_gyr 12-006a: hw init
671[ 3.399053] input: l3gd20_gyr as /devices/i2c-12/12-006a/input/input9
672[ 3.399236] l3gd20_gyr 12-006a: power off
673[ 3.399389] l3gd20_gyr 12-006a: l3gd20_gyr probed: device created successfully
674[ 3.399450] BootLog, -l3gd20_gyr_init, ret=0
675[ 3.399450] BootLog, +taos_init
676[ 3.399511] tsl2772 12-0039: taos_probe: client->irq = 337
677[ 3.399877] tsl2772 12-0039: taos_probe: 'tsl27721 / tsl27725 rev. 2' detected
678[ 3.401007] input: tsl2772_proximity as /devices/virtual/input/input10
679[ 3.401281] input: tsl2772_als as /devices/virtual/input/input11
680[ 3.401678] tsl2772 12-0039: Probe ok.
681[ 3.401739] BootLog, -taos_init, ret=0
682[ 3.401922] gpio_set_debounce: gpio-154 status -22
683[ 3.402014] gpio_set_debounce: gpio-159 status -22
684[ 3.402197] input: gpio-keys as /devices/platform/gpio-keys/input/input12
685[ 3.402594] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2019-10-01 22:28:58 UTC (1569968938)
686[ 3.402655] [BAT]BootLog, +pm8921_bms_probe
687[ 3.402685] [BAT]set_battery_data, SBJ
688[ 3.403326] read_ocv_trim: program rev reg is 0x50
689[ 3.403326] read_ocv_trim: trim reg is 0x42
690[ 3.403357] read_ocv_trim: trim delta is 7
691[ 3.403387] pm8921_is_usb_chg_plugged_in: called before init
692[ 3.404517] [BAT]usb_chg_plugged_in, val = 0, vbus = 39
693[ 3.404639] pm8921_is_usb_chg_plugged_in: called before init
694[ 3.405768] [BAT]usb_chg_plugged_in, val = 0, vbus = 39
695[ 3.429665] [BAT]batt_calculate_bms, reg_107=00, USB=N, MBG=Y
696[ 3.430856] [BAT]## CC_ADJUST ## ocv=4228 soc=93.0 (700) cps=20500 valid=1 (LGOCV Start)
697[ 3.430886] [BAT]Soc(fin,_cc._,_oo._(avg._)_cv._)vbatt(ocv_)(i_vs,_avg)temp,cc_uah___,comp_(c_soc)rbat,Lgocv,sec
698[ 3.430917] [BAT] 93( 93, 93.0, 87.2( 87.2) 0.0)v4101(4165)( 298, 298)t317,c 700, 0(20500)r216,L4228,s 0
699[ 3.433175] pm8921_is_usb_chg_plugged_in: called before init
700[ 3.434304] [BAT]usb_chg_plugged_in, val = 0, vbus = 39
701[ 3.435434] pm8921_bms_probe: OK battery_capacity_at_boot=93 volt = 4072506 ocv = 4243181
702[ 3.435464] [BAT]BootLog, -pm8921_bms_probe
703[ 3.435617] [BAT]BootLog, +pm8921_charger_probe
704[ 3.436227] [BAT]r_sense finetune ibatmax = 1000 mA (origin = 1000)
705[ 3.436288] [BAT]androidboot_mode = 5 , pwr_on_status=0x0
706[ 3.436471] [BAT]pm_chg_override_hot = 0
707[ 3.436502] [BAT]pm_chg_override_cold = 0
708[ 3.436532] charger wake lock get!!!
709[ 3.438089] [BAT]## SOC= 93( 93, 93),4072(4101),A=0000,T=250,On=0,0,(0),Unknown 000(000),vd=4350(0,0),ib=1000,0,F03,R00,W00
710[ 3.440714] [BAT]pm8921_charger_probe, power_supply_register(usb, dc, batt) PASS!
711[ 3.443430] [BAT]notify_usb_of_the_plugin_event = 0
712[ 3.443430] USB::otg msm_otg_set_vbus_state online=0 init=0
713[ 3.443705] [BAT]batt_create_kernel_debuglevel, PASS!
714[ 3.443766] [BAT]BootLog, -pm8921_charger_probe
715[ 3.444498] Unable to register core for 0
716[ 3.444742] Unable to register core for 1
717[ 3.445231] ALSA device list:
718[ 3.445231] #0: msm8930-sitar-snd-card
719[ 3.445566] Freeing init memory: 248K
720[ 3.445597] msm_otg msm_otg: USB in low power mode
721[ 3.448039] msm_otg msm_otg: USB exited from low power mode
722[ 3.448069] USB::otg msm_otg_sm_work b_idle work
723[ 3.448069] USB::otg msm_otg_sm_work remove cable chg_state=0
724[ 3.448100] USB::otg msm_otg_notify_chg_type chg_type=INVALID_CHARGER(0) curernt chg_type=0
725[ 3.463268] device label sailfish devid 1 transid 2516461 /dev/mmcblk0p28
726[ 3.464092] btrfs: enabling auto recovery
727[ 3.464092] btrfs: disk space caching is enabled
728[ 3.468365] btrfs: bdev /dev/mmcblk0p28 errs: wr 0, rd 0, flush 0, corrupt 0, gen 0
729[ 3.478437] Btrfs detected SSD devices, enabling SSD mode
730[ 3.581199] msm_otg msm_otg: USB in low power mode
731[ 4.339386] btrfs: enabling auto defrag
732[ 4.339386] btrfs: disk space caching is enabled
733[ 4.375553] preinit: (4.37) Welcome to Sailfish OS 3.1.0.11 (Seitseminen)
734[ 4.376163] preinit: (4.37) "Magic Close" /dev/watchdog with character 'V'
735[ 5.027956] preinit: (5.02) is_erase_needed: No : 0
736[ 5.109201] preinit: (5.10) get_bootstate: USER : 0
737[ 5.109781] preinit: (5.10) BOOTSTATE = USER
738[ 5.113505] preinit: (5.11) Booting to default.target
739[ 5.620509] systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
740[ 5.620753] systemd[1]: Detected architecture arm.
741[ 5.628689] systemd[1]: Set hostname to <Sailfish>.
742[ 6.003296] systemd[1]: Reached target Login Prompts.
743[ 6.003998] systemd[1]: Reached target Encrypted Volumes.
744[ 6.004333] systemd[1]: Reached target Swap.
745[ 6.004791] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
746[ 6.005676] systemd[1]: Created slice Root Slice.
747[ 6.006104] systemd[1]: Listening on udev Kernel Socket.
748[ 6.006470] systemd[1]: Listening on udev Control Socket.
749[ 6.007355] systemd[1]: Created slice System Slice.
750[ 6.008301] systemd[1]: Created slice User and Session Slice.
751[ 6.008759] systemd[1]: Listening on Journal Socket.
752[ 6.051060] systemd[1]: Starting Setup Virtual Console...
753[ 6.140882] systemd[1]: Mounting Debug File System...
754[ 6.181077] systemd[1]: Starting Apply Kernel Variables...
755[ 6.331207] systemd[1]: Starting Create list of required static device nodes for the current kernel...
756[ 6.440958] systemd[1]: Mounting FFS mount...
757[ 6.520921] systemd[1]: Mounting FUSE Control File System...
758[ 6.521410] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
759[ 6.650969] systemd[1]: Mounting Temporary Directory...
760[ 6.651579] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
761[ 6.673096] systemd[1]: Reached target Slices.
762[ 6.741187] systemd[1]: Starting Remount Root and Kernel File Systems...
763[ 6.741858] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
764[ 6.742408] systemd[1]: Listening on Journal Socket (/dev/log).
765[ 6.851213] systemd[1]: Starting Journal Service...
766[ 6.855272] systemd[1]: Mounted Debug File System.
767[ 6.855608] systemd[1]: Mounted FUSE Control File System.
768[ 6.855882] systemd[1]: Mounted FFS mount.
769[ 6.856157] systemd[1]: Mounted Temporary Directory.
770[ 6.930962] systemd[1]: Started Setup Virtual Console.
771[ 7.000915] systemd[1]: Started Apply Kernel Variables.
772[ 7.080940] systemd[1]: Started Create list of required static device nodes for the current kernel.
773[ 7.082435] systemd[1]: Started Journal Service.
774[ 7.365328] btrfs: enabling auto defrag
775[ 7.365359] btrfs: disk space caching is enabled
776[ 8.346925] systemd-journald[200]: Received request to flush runtime journal from PID 1
777[ 8.362185] [BAT]## STATUS: Unknown -> Discharging (Real)
778[ 8.362215] [BAT]## STATUS: Unknown -> Discharging (AP)
779[ 8.363436] [BAT]## HEALTH: Unknown -> Good
780[ 8.364626] [BAT]## SOC= 93( 93, 93),4018(4101),A=0349,T=318,On=0,0,(0),Unknown 000(000),vd=4350(0,0),ib=1000,0,F03,R00,W10
781[ 8.365817] [BAT] Internal R 162 mOhm, I1:298600uA I2:649200uA V1:4071921uV V2:4015095uV
782[ 10.774576] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: barrier=1
783[ 10.813093] Adding 520180k swap on /dev/mmcblk0p24. Priority:-1 extents:1 across:520180k SS
784[ 10.839035] device label sailfish devid 1 transid 2516463 /dev/mmcblk0p28
785[ 10.961819] EXT4-fs (mmcblk0p19): mounted filesystem with ordered data mode. Opts: barrier=1
786[ 11.020082] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1
787[ 11.818922] wcnss_wlan triggered by userspace
788[ 11.936670] pil pil3: wcnss: Brought out of reset
789[ 12.055882] [BAT]batt_set_cc_per_soc, 20500 -> 16508
790[ 12.055943] [BAT]batt_set_r_sense_uohm, 10000 -> 12620
791[ 12.055974] [BAT]r_sense finetune ibatmax = 1262 mA (origin = 1000)
792[ 12.400518] wcnss_wlan_ctrl_probe: SMD ctrl channel up
793[ 12.400732] wcnss: version 01040102
794[ 12.400763] wcnss: schedule dnld work for riva
795[ 12.418831] wcnss: NV bin size: 29772, total_fragments: 10
796[ 12.418861] wcnss: no space available for smd frame
797[ 12.450877] wcnss: no space available for smd frame
798[ 12.480878] wcnss: no space available for smd frame
799[ 12.510849] wcnss: no space available for smd frame
800[ 12.554738] wcnss: received WCNSS_NVBIN_DNLD_RSP from ccpu
801[ 12.987761] mipi_truly_otm9608a_lcd_on: mfd_bkl=EEFD8A64
802[ 12.987791] mipi_truly_otm9608a_lcd_on(), mipi_mode=1, msm_project_id=3
803[ 12.989623] lcm_detect_get_adc chan=1, adc_code=30551, measurement=569638 physical=569638
804[ 12.989653] lcm_detect_get_adc: TCL Panel, adc=1707 mV
805[ 13.020051] cfg80211: Calling CRDA to update world regulatory domain
806[ 13.085151] wlan: module license 'Proprietary' taints kernel.
807[ 13.085182] Disabling lock debugging due to kernel taint
808[ 13.105295] wlan: loading driver v3.2.1.74
809[ 13.105325] wlan: bin_index = 0
810[ 13.118724] ieee80211 phy0: info: cfg80211 reg_notifier callback for country 00
811[ 13.120830] wlan: [746:E :VOS] wlan_hdd_crda_reg_notifier load/unload or SSR is in progress Ignore
812[ 13.120860] cfg80211: World regulatory domain updated:
813[ 13.120891] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
814[ 13.120891] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
815[ 13.120921] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
816[ 13.120921] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
817[ 13.120952] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
818[ 13.120952] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
819[ 13.120982] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
820[ 13.121013] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
821[ 13.121013] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
822[ 13.124339] DefaultCountry is EU
823[ 13.138348] wlan: [735:E :HDD] hdd_wlan_startup: Invalid MAC address in NV, using MAC from ini file 50:56:a8:01:0c:ad
824[ 13.412147] USB::enable_store enable=0
825[ 13.412177] enable_store: android_usb: already disabled
826[ 13.432351] USB::ums fsg_store_file rc=0 count=1
827[ 13.751472] fs_mgr: No entries found in fstab
828[ 13.751503] init: fs_mgr_mount_all returned an error
829[ 13.802655] request_suspend_state: wakeup (3->0) at 13801845110 (2019-10-01 22:29:08.891264568 UTC)
830[ 13.808850] [TSL277X_P][Before] raw=0, status=0, far=0, near=0
831[ 13.808850] [TSL277X_P][After] far=386, near=811, from=0, to=811
832[ 13.812849] [TSL277X_P][Before] raw=0, status=0, far=386, near=811
833[ 13.812879] [TSL277X_P][After] far=386, near=697, from=0, to=697
834[ 13.912589] l3gd20_gyr 12-006a: hw init
835[ 13.913016] l3gd20_gyr 12-006a: [WH Lee] l3gd20_gyr_enable::hrtimer_start
836[ 13.937677] misc memnotify: 0xed97ae40 - observer 1 created
837[ 13.937860] misc memnotify: 0xed97a780 - observer 2 created
838[ 13.937921] misc memnotify: 0xed97ae40 - threshold set to 0x0
839[ 13.937921] misc memnotify: 0xed97a780 - threshold set to 0x0
840[ 13.943537] l3gd20_gyr 12-006a: range set to: 2000 dps
841[ 13.943598] l3gd20_gyr 12-006a: power off
842[ 13.943720] l3gd20_gyr 12-006a: [WH Lee] l3gd20_gyr_disable::hrtimer_cancel
843[ 14.045963] request_suspend_state: wakeup (0->0) at 14045184035 (2019-10-01 22:29:09.134603493 UTC)
844[ 14.412696] init: cannot find '/system/bin/logd2', disabling 'logd2'
845[ 14.477735] warning: `rild' uses 32-bit capabilities (legacy support in use)
846[ 14.519914] msm_thermal: enabled = 0
847[ 14.550740] Adding 53864k swap on /dev/zram1. Priority:100 extents:1 across:53864k SS
848[ 14.608179] Adding 53864k swap on /dev/zram0. Priority:100 extents:1 across:53864k SS
849[ 14.891042] pil pil0: q6: Brought out of reset
850[ 14.929589] apr_tal:Q6 Is Up
851[ 15.079169] init: sys_prop: permission denied uid:1013 name:persist.camera.shutter.disable
852[ 15.079352] init: sys_prop: permission denied uid:1013 name:persist.media.metrics.enabled
853[ 15.079505] init: sys_prop: permission denied uid:1013 name:camera.fifo.disable
854[ 15.282710] pil pil1: modem_fw: Brought out of reset
855[ 14.944086] diag: Invalid Msg type 12 proc 2
856[ 15.556081] hcismd_set_enable 0
857[ 15.556142] Bluetooth: opening HCI-SMD channel :APPS_RIVA_BT_ACL
858[ 15.556142] Bluetooth: opening HCI-SMD channel :APPS_RIVA_BT_CMD
859[ 15.556508] Bluetooth: HCI device registration is starting
860[ 17.631008] wlan: WCNSS WLAN Version 1.4.1.2, Host expected 1.3.1.2
861[ 17.631039] wlan: WCNSS software version MBAAAANAZW1201100
862[ 17.631039] wlan: WCNSS hardware version WCN v2.0 RadioPhy vIris_TSMC_2.0 with 19.2MHz XO
863[ 17.631100] wlan: hw_maj=2 hw_min=0 hw_source=0
864[ 17.631497] wlan: [1:752:F :CTL] Begin WDI Update Scan Parameters New Style Params
865[ 17.631527] wlan: [1:752:E :CTL] End Update Scan Parameters New Style
866[ 17.646207] wlan: driver loaded
867[ 17.651457] wlan: [1:752:F :CTL] Begin WDI Update Scan Parameters New Style Params
868[ 17.651487] wlan: [1:752:E :CTL] End Update Scan Parameters New Style
869[ 18.042026] pil pil2: modem: Brought out of reset
870[ 18.762032] [WH Lee] taos_als_enable::on=1, rc=0
871[ 18.784892] Notify: smsm init
872[ 18.855089] [TSL277X_P][Before] raw=94, status=0, far=411, near=411
873[ 18.855119] [TSL277X_P][After] far=386, near=697, from=0, to=697
874[ 19.473554] [WH Lee] taos_als_enable::on=0, rc=0
875[ 19.556935] [TSL277X_P][Before] raw=100, status=0, far=411, near=411
876[ 19.556966] [TSL277X_P][After] far=386, near=697, from=0, to=697
877[ 19.582115] [WH Lee] taos_als_enable::on=1, rc=0
878[ 20.465679] apr_tal:Modem Is Up
879[ 20.577323] ADDRCONF(NETDEV_UP): wlan0: link is not ready
880[ 20.577384] wlan: [1114:E :SME] PMC: STA not associated with an AP with single active session. BMPS cannot be entered
881
882[ 20.700717] l3gd20_gyr 12-006a: hw init
883[ 20.701083] l3gd20_gyr 12-006a: [WH Lee] l3gd20_gyr_enable::hrtimer_start
884[ 21.241446] l3gd20_gyr 12-006a: power off
885[ 21.241751] l3gd20_gyr 12-006a: [WH Lee] l3gd20_gyr_disable::hrtimer_cancel
886[ 21.429055] wlan: [1313:E :HDD] wlan_hdd_cfg80211_set_ie Set UNKNOWN IE 3B
887[ 21.451854] wlan: connection failed with 00:00:00:00:00:00 reason:1 and Status:9
888[ 21.838150] wlan: [1313:E :HDD] wlan_hdd_cfg80211_set_ie Set UNKNOWN IE 3B
889[ 21.858049] wlan: connection failed with 00:00:00:00:00:00 reason:1 and Status:9
890[ 22.154127] l3gd20_gyr 12-006a: hw init
891[ 22.154463] l3gd20_gyr 12-006a: [WH Lee] l3gd20_gyr_enable::hrtimer_start
892[ 22.231680] handle_bam_mux_cmd: dropping invalid LCID 10 reserved 1 cmd 1 pad 0 ch 10 len 0
893[ 22.231741] handle_bam_mux_cmd: dropping invalid LCID 11 reserved 1 cmd 1 pad 0 ch 11 len 0
894[ 22.336090] l3gd20_gyr 12-006a: power off
895[ 22.336212] l3gd20_gyr 12-006a: [WH Lee] l3gd20_gyr_disable::hrtimer_cancel
896[ 22.402136] wcnss_post_bootup: Cancel APPS vote for Iris & WCNSS
897[ 22.461651] l3gd20_gyr 12-006a: hw init
898[ 22.461986] l3gd20_gyr 12-006a: [WH Lee] l3gd20_gyr_enable::hrtimer_start
899[ 22.584098] l3gd20_gyr 12-006a: power off
900[ 22.584282] l3gd20_gyr 12-006a: [WH Lee] l3gd20_gyr_disable::hrtimer_cancel
901[ 22.716801] l3gd20_gyr 12-006a: hw init
902[ 22.717137] l3gd20_gyr 12-006a: [WH Lee] l3gd20_gyr_enable::hrtimer_start
903[ 22.731451] wlan: [1313:E :HDD] wlan_hdd_cfg80211_set_ie Set UNKNOWN IE 3B
904[ 22.751258] wlan: connection failed with 00:00:00:00:00:00 reason:1 and Status:9
905[ 22.845536] l3gd20_gyr 12-006a: power off
906[ 22.845658] l3gd20_gyr 12-006a: [WH Lee] l3gd20_gyr_disable::hrtimer_cancel
907[ 22.962765] l3gd20_gyr 12-006a: hw init
908[ 22.963100] l3gd20_gyr 12-006a: [WH Lee] l3gd20_gyr_enable::hrtimer_start
909[ 23.152815] l3gd20_gyr 12-006a: power off
910[ 23.152968] l3gd20_gyr 12-006a: [WH Lee] l3gd20_gyr_disable::hrtimer_cancel
911[ 24.108194] wlan: [1313:E :HDD] wlan_hdd_cfg80211_set_ie Set UNKNOWN IE 3B
912[ 24.136212] wlan: connection failed with 00:00:00:00:00:00 reason:1 and Status:9
913[ 25.372043] dbus-daemon(1440) send signal 9 to dbus-daemon(1547)
914[ 25.540607] dbus-daemon(1440) send signal 9 to dbus-daemon(1536)
915[ 26.132122] mipi_truly_otm9608a_set_backlight(), BL value is 68, #3
916[ 26.172226] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=2
917[ 30.097573] apr_tal: SMD_EVENT_OPEN
918[ 22.195360] sps:BAM 0x124c2000 is registered.
919[ 30.120738] slimbus laddr:0x5, EAPC:0x3:0x40
920[ 31.537128] dbus-daemon(1440) send signal 9 to dbus-daemon(1606)
921[ 34.314359] wlan: [1313:E :HDD] wlan_hdd_cfg80211_set_ie Set UNKNOWN IE 3B
922[ 34.357240] wlan: connection failed with 00:00:00:00:00:00 reason:1 and Status:9
923[ 36.653593] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 59080000
924[ 36.702212] mipi_truly_otm9608a_set_backlight(), BL value is 56, #2
925[ 37.689272] dbus-daemon(1440) send signal 9 to dbus-daemon(1660)
926[ 38.764230] dbus-daemon(1440) send signal 9 to dbus-daemon(1690)
927[ 44.942285] dbus-daemon(1440) send signal 9 to dbus-daemon(1814)
928[ 49.940302] dbus-daemon(1440) send signal 9 to dbus-daemon(2063)
929[ 50.100534] wlan: [1313:E :HDD] wlan_hdd_cfg80211_set_ie Set UNKNOWN IE 3B
930[ 50.121837] wlan: connection failed with 00:00:00:00:00:00 reason:1 and Status:9
931[ 31.469983] SLIM_CL: skip reconfig sequence
932[ 50.454051] SLIM_CL: skip reconfig sequence
933[ 53.673401] [BAT] 92( 92, 92.5, 74.0( 76.5) 0.0)v3838(4037)( 881, 584)t334,c 8003, 191(16500)r226,L4228,s10
934[ 53.675843] [BAT]## SOC= 92( 92, 92),3863(3838),A=0492,T=333,On=0,0,(0),Unknown 000(000),vd=4350(0,0),ib=1000,0,F03,R00,W10
935[ 53.676972] [BAT] Internal R 685 mOhm, I1:649200uA I2:881933uA V1:4015095uV V2:3855450uV
936[ 55.271265] mipi_truly_otm9608a_set_backlight(), BL value is 55, #1
937[ 56.602838] systemd(1) send signal 9 to rsync(2240)
938[ 62.400946] app_process(2426) send signal 3 to Signal Catcher(2426)
939[ 64.227071] app_process(2476) send signal 3 to Signal Catcher(2476)
940[ 69.790355] dbus-daemon(1440) send signal 9 to dbus-daemon(2510)
941[ 70.610010] wlan: [1313:E :HDD] wlan_hdd_cfg80211_set_ie Set UNKNOWN IE 3B
942[ 70.626339] wlan: connection failed with 00:00:00:00:00:00 reason:1 and Status:9
943[ 79.694887] [TSL277X_P][Before] raw=1023, status=1, far=386, near=697
944[ 79.694979] [TSL277X_P][After] far=500, near=697, from=500, to=65535
945[ 80.518052] [TSL277X_P][Before] raw=345, status=0, far=500, near=697
946[ 80.518113] [TSL277X_P][After] far=500, near=697, from=249, to=697
947[ 80.871142] [TSL277X_P][Before] raw=88, status=0, far=500, near=697
948[ 80.871204] [TSL277X_P][After] far=386, near=697, from=0, to=697
949[ 96.537616] wlan: [1313:E :HDD] wlan_hdd_cfg80211_set_ie Set UNKNOWN IE 3B
950[ 96.571616] wlan: connection failed with 00:00:00:00:00:00 reason:1 and Status:9
951[ 111.320097] [TSL277X_P][Before] raw=1023, status=1, far=386, near=697
952[ 111.320158] [TSL277X_P][After] far=500, near=697, from=500, to=65535
953[ 112.261895] [TSL277X_P][Before] raw=99, status=0, far=500, near=697
954[ 112.261986] [TSL277X_P][After] far=386, near=697, from=0, to=697
955[ 122.515489] [TSL277X_P][Before] raw=1023, status=1, far=386, near=697
956[ 122.515580] [TSL277X_P][After] far=500, near=697, from=500, to=65535
957[ 122.867450] [TSL277X_P][Before] raw=96, status=0, far=500, near=697
958[ 122.867511] [TSL277X_P][After] far=386, near=697, from=0, to=697
959[ 127.083961] wlan: [1313:E :HDD] wlan_hdd_cfg80211_set_ie Set UNKNOWN IE 3B
960[ 127.102975] wlan: connection failed with 00:00:00:00:00:00 reason:1 and Status:9
961[ 147.041324] [WH Lee] taos_als_enable::on=0, rc=0
962[ 147.205402] request_suspend_state: sleep (0->3) at 147203294918 (2019-10-01 22:31:21.806986843 UTC)
963[ 147.205951] [TP] synaptics_early_suspend() +++
964[ 147.206104] [TP] sleep mode 0 already set
965[ 147.206134] [TP] emitting touch release events
966[ 147.206195] [TP] synaptics_early_suspend()4085 ---
967[ 147.562398] mdp4_dsi_cmd_off: Error, SET_CLK_OFF by force
968[ 147.562459] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
969[ 147.571890] mipi_truly_otm9608a_lcd_off()
970[ 147.709354] mipi_truly_otm9608a_lcd_off()--
971[ 147.846268] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
972[ 152.203418] PM: suspend entry 2019-10-01 22:31:26.804972497 UTC
973[ 152.238150] Freezing user space processes ... (elapsed 0.02 seconds) done.
974[ 152.514329] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
975[ 152.535632] Suspending console(s) (use no_console_suspend to debug)
976[ 152.546802] l3gd20_gyr 12-006a: suspend
977[ 152.547077] [TP] synaptics_suspend() +++
978[ 152.547077] [TP] synaptics_suspend() ---
979[ 152.573233] PM: suspend of devices complete after 34.335 msecs
980[ 152.573752] PM: late suspend of devices complete after 0.518 msecs
981[ 152.574820] [TP] synaptics_suspend_noirq() +++
982[ 152.574820] [TP] synaptics_suspend_noirq() ---
983[ 152.575003] PM: noirq suspend of devices complete after 1.251 msecs
984[ 152.575003] Disabling non-boot CPUs ...
985[ 152.575522] msm_pm_enter
986[ 152.575522] msm_pm_enter: power collapse
987[ 152.575522] msm_rpmrs_show_resources: resource pxo: buffered 1, value 0x0
988[ 152.575522] msm_rpmrs_show_resources: resource L2_cache: value 0
989[ 152.575522] msm_rpmrs_show_resources: resource vdd_mem: buffered 1, value 0x40800000
990[ 152.575522] msm_rpmrs_show_resources: resource vdd_dig: buffered 1, value 0x0
991[ 152.575522] msm_rpmrs_show_resources: resource rpm_ctl: buffered 0, value 0x0
992[ 152.575522] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000000,00020000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
993[ 152.575522] msm_pm_enter: limit c000fe34: pxo 0, l2_cache 0, vdd_mem 1, vdd_dig 1
994[ 152.575522] mpm_irq = 0, apps_irq = 0
995[ 152.575522] mpm_irq = 10, apps_irq = 299
996[ 152.575522] msm_mpm_irqs_detectable: cannot monitor 000000,00000000,00000000,00000000,00000000,00000000,00020000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
997[ 152.575522] msm_pm_enter: return
998[ 152.575522] msm_gpio_show_resume_irq: 299 triggered
999[ 152.575522] gic_show_resume_irq: 48 triggered
1000[ 152.575522] gic_show_resume_irq: 52 triggered
1001[ 152.576712] PM: noirq resume of devices complete after 1.007 msecs
1002[ 152.577842] [TP] IST run when is_suspended = 1
1003[ 152.578330] PM: early resume of devices complete after 0.457 msecs
1004[ 152.580100] pm8xxx_irq_block_handler: Show resume wakeup pmirq = 78
1005[ 152.580619] [TP] synaptics_resume() +++
1006[ 152.585716] [TP] sent power key event
1007[ 152.585746] [TP] synaptics_resume() ---
1008[ 152.585777] l3gd20_gyr 12-006a: resume
1009[ 152.587272] PM: resume of devices complete after 8.942 msecs
1010[ 152.588890] msm_suspend_end, is_wakeup_from_pc = 1
1011[ 152.602227] wakeup wake lock: mce_input_handler
1012[ 152.604852] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
1013[ 152.604852] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
1014[ 152.604913] QSEECOM: qseecom_receive_req: Interrupted: exiting wait_rcv_req loop
1015[ 152.604913] QSEECOM: qseecom_ioctl: failed qseecom_receive_req: -512
1016[ 152.659087] request_suspend_state: wakeup (3->0) at 152656951807 (2019-10-01 22:31:33.072549000 UTC)
1017[ 152.588921] Restarting tasks ... done.
1018[ 152.677491] PM: suspend exit 2019-10-01 22:31:33.090937057 UTC
1019[ 152.677491] suspend: exit suspend, ret = 0 (2019-10-01 22:31:33.090967553 UTC)
1020[ 152.677521] active wake lock mmc1_detect
1021[ 152.677521] active wake lock mce_cpu_keepalive
1022[ 152.677552] active wake lock main
1023[ 152.677552] active wake lock mce_display_on
1024[ 152.677552] active wake lock mce_tklock_notify
1025[ 152.677582] active wake lock dsme_iphb_wakeup
1026[ 152.677582] active wake lock mce_mux
1027[ 152.698000] [WH Lee] taos_als_enable::on=1, rc=0
1028[ 152.746986] mipi_truly_otm9608a_lcd_on(), mipi_mode=1, msm_project_id=3
1029[ 153.039645] mdp_enable_irq: MDP IRQ term-0x400 is already set, mask=400 irq=1
1030[ 153.039798] wlan: [109:E :HDD] hdd_conf_hostarpoffload:
1031
1032[ 153.039829] wlan: [109:E :SME] pmcSetHostOffload: 2507: Ignoring the indication as we are not connected
1033
1034[ 153.039859] wlan: [109:E :HDD] hdd_conf_hostarpoffload: Failure to disable host offload feature
1035
1036[ 153.048802] [TP] synaptics_late_resume() +++
1037[ 153.049992] [TP] sleep mode 0 already set
1038[ 153.050022] [TP] synaptics_late_resume()4113 ---
1039[ 153.102792] mipi_truly_otm9608a_set_backlight(), BL value is 1, #3
1040[ 153.118113] mipi_truly_otm9608a_set_backlight(), BL value is 3, #2
1041[ 153.122386] mipi_truly_otm9608a_set_backlight(), BL value is 5, #1
1042[ 155.127819] dbus-daemon(1440) send signal 9 to dbus-daemon(2661)
1043[ 157.085670] wlan: [1313:E :HDD] wlan_hdd_cfg80211_set_ie Set UNKNOWN IE 3B
1044[ 157.103769] wlan: connection failed with 00:00:00:00:00:00 reason:1 and Status:9
1045[ 177.716038] [BAT] 91( 91, 91.9, 81.6( 81.6) 0.0)v4065(4108)( 197, 197)t329,c 16798, 63(16500)r216,L4228,s10
1046[ 177.722478] [BAT]## SOC= 91( 91, 91),3998(4065),A=0003,T=329,On=0,0,(0),Unknown 000(000),vd=4350(0,0),ib=1000,0,F03,R00,W10
1047[ 177.727910] [BAT] Internal R 306 mOhm, I1:881933uA I2:227258uA V1:3855450uV V2:4055811uV
1048[ 197.296688] wlan: [1313:E :HDD] wlan_hdd_cfg80211_set_ie Set UNKNOWN IE 3B
1049[ 197.319059] wlan: connection failed with 00:00:00:00:00:00 reason:1 and Status:9
1050[ 243.158736] wlan: [1313:E :HDD] wlan_hdd_cfg80211_set_ie Set UNKNOWN IE 3B
1051[ 243.176071] wlan: connection failed with 00:00:00:00:00:00 reason:1 and Status:9