· 9 years ago · Dec 17, 2016, 09:20 PM
1[ 0.000000] Initializing cgroup subsys cpu
2[ 0.000000] Initializing cgroup subsys cpuacct
3[ 0.000000] Linux version 3.18.20-Sultan (sultan@sultan-box) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #30 SMP PREEMPT Thu Dec 15 20:00:25 PST 2016
4[ 0.000000] CPU: AArch64 Processor [512f2011] revision 1
5[ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8996pro + PMI8996 MTP
6[ 0.000000] efi: Getting EFI parameters from FDT:
7[ 0.000000] efi: UEFI not found.
8[ 0.000000] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB
9[ 0.000000] Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 43 MiB
10[ 0.000000] Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 98 MiB
11[ 0.000000] Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB
12[ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
13[ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
14[ 0.000000] Reserved memory: reserved region for node 'ramoops_mem@ac000000': base 0x00000000ac000000, size 2 MiB
15[ 0.000000] Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB
16[ 0.000000] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
17[ 0.000000] Removed memory: created DMA memory pool at 0x000000008ea00000, size 43 MiB
18[ 0.000000] Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
19[ 0.000000] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
20[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
21[ 0.000000] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
22[ 0.000000] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
23[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
24[ 0.000000] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
25[ 0.000000] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
26[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
27[ 0.000000] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
28[ 0.000000] Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB
29[ 0.000000] Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
30[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000083400000, size 0 MiB
31[ 0.000000] Reserved memory: initialized node dfps_data_mem@83400000, compatible id shared-dma-pool
32[ 0.000000] cma: Reserved 32 MiB at 0x00000000f6800000
33[ 0.000000] psci: probing for conduit method from DT.
34[ 0.000000] psci: PSCIv1.0 detected in firmware.
35[ 0.000000] psci: Using standard PSCI v0.2 function IDs
36[ 0.000000] psci: Initializing psco_cpu_init
37[ 0.000000] psci: Initializing psco_cpu_init
38[ 0.000000] psci: Initializing psco_cpu_init
39[ 0.000000] PERCPU: Embedded 11 pages/cpu @ffffffc17d6d6000 s16384 r0 d28672 u45056
40[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1490909
41[ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 androidboot.hardware=qcom ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=logging androidboot.serialno=a5a020a0 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3fa5_1080p_cmd:1:none:cfg:single_dsi fpsimd.fpsimd_settings=0 app_setting.use_app_setting=0 androidboot.mode=normal androidboot.project_name=15811 androidboot.rf_version=22 androidboot.hw_version=28 ddr_manufacture_info=Samsung ddr_row0_info=16 androidboot.pcba_number=001581206B24036000003142 androidboot.enable_dm_verity=1 androidboot.secboot=enabled androidboot.angela=disabled androidboot.nobatt=0
42[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
43[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
44[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
45[ 0.000000] Memory: 5694124K/6058300K available (12392K kernel code, 1355K rwdata, 4888K rodata, 300K init, 2850K bss, 364176K reserved)
46[ 0.000000] Virtual kernel memory layout:
47[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
48[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
49[ 0.000000] 0xffffffbdc1000000 - 0xffffffbdc6f65400 ( 95 MB actual)
50[ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
51[ 0.000000] fixed : 0xffffffbffbdfe000 - 0xffffffbffbdff000 ( 4 KB)
52[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
53[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc17d950000 ( 6105 MB)
54[ 0.000000] .init : 0xffffffc001162000 - 0xffffffc0011ad000 ( 300 KB)
55[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc001161224 ( 17285 KB)
56[ 0.000000] .data : 0xffffffc0011b6000 - 0xffffffc001308de0 ( 1356 KB)
57[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
58[ 0.000000] HMP scheduling enabled.
59[ 0.000000] Preemptible hierarchical RCU implementation.
60[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
61[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
62[ 0.000000] NR_IRQS:64 nr_irqs:64 0
63[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
64[ 0.000000] MPM 1 irq mapping errored -517
65[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
66[ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
67[ 0.000017] Switched to clocksource arch_sys_counter
68[ 0.000649] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
69[ 0.000662] pid_max: default: 32768 minimum: 301
70[ 0.000723] Security Framework initialized
71[ 0.000736] SELinux: Initializing.
72[ 0.000796] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
73[ 0.000804] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
74[ 0.001271] Initializing cgroup subsys freezer
75[ 0.001530] /cpus/cpu@0: Unknown CPU type
76[ 0.001539] /cpus/cpu@1: Unknown CPU type
77[ 0.001546] /cpus/cpu@100: Unknown CPU type
78[ 0.001554] /cpus/cpu@101: Unknown CPU type
79[ 0.001576] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
80[ 0.001599] EFI services will not be available.
81[ 0.009165] NOHZ: local_softirq_pending 02
82[ 0.010665] hyp_assign_table is not functional as qcom_secure_mem is not allocated.
83[ 0.011151] clock-cpu-8996: configuring clocks for the perf cluster
84[ 0.011296] cpu_clock_8996_early_init: finished CPU clock configuration
85[ 0.016981] Brought up 4 CPUs
86[ 0.016994] SMP: Total of 4 processors activated.
87[ 0.022439] pinctrl core: initialized pinctrl subsystem
88[ 0.022798] regulator-dummy: no parameters
89[ 0.080565] NET: Registered protocol family 16
90[ 0.100090] cpuidle: using governor ladder
91[ 0.160059] cpuidle: using governor menu
92[ 0.190069] cpuidle: using governor qcom
93[ 0.190675] vdso: 2 pages (1 code @ ffffffc0011bd000, 1 data @ ffffffc0011bc000)
94[ 0.191196] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc0bfc00000-ffffffc0bfffffff]
95[ 0.191936] DMA: preallocated 256 KiB pool for atomic allocations
96[ 0.192224] msm_smem_init: unable to create logging context
97[ 0.192259] msm_smd_init: unable to create SMD logging context
98[ 0.192266] msm_smd_init: unable to create SMSM logging context
99[ 0.192477] <CORE> glink_init: unable to create log context
100[ 0.192722] <CORE> glink_core_register_transport: unable to create log context for [dsps:smd_trans]
101[ 0.192855] <CORE> glink_core_register_transport: unable to create log context for [lpass:smd_trans]
102[ 0.192972] <CORE> glink_core_register_transport: unable to create log context for [mpss:smd_trans]
103[ 0.193098] <CORE> glink_core_register_transport: unable to create log context for [wcnss:smd_trans]
104[ 0.193216] <CORE> glink_core_register_transport: unable to create log context for [rpm:smd_trans]
105[ 0.193831] Failed to create IPC log0
106[ 0.193838] Failed to create IPC log1
107[ 0.193842] Failed to create IPC log2
108[ 0.193847] Failed to create IPC log3
109[ 0.193852] Failed to create IPC log4
110[ 0.195490] platform 994400.qcom,mdss_dsi_pll: assigned reserved memory node dfps_data_mem@83400000
111[ 0.204867] sps:sps is ready.
112[ 0.205356] i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_12/i2c_12_active, deferring probe
113[ 0.205944] i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_active, deferring probe
114[ 0.206183] i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe
115[ 0.206425] i2c-msm-v2 7577000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_3/i2c_3_active, deferring probe
116[ 0.206666] i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
117[ 0.206997] irq: no irq domain found for /soc/pinctrl@01010000 !
118[ 0.208404] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
119[ 0.231302] smd_channel_probe_now: allocation table not initialized
120[ 0.231556] smd_channel_probe_now: allocation table not initialized
121[ 0.231805] smd_channel_probe_now: allocation table not initialized
122[ 0.232056] smd_channel_probe_now: allocation table not initialized
123[ 0.232282] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
124[ 0.232488] cpu 0 reg dump setup failed
125[ 0.232494] cpu 1 reg dump setup failed
126[ 0.232500] cpu 2 reg dump setup failed
127[ 0.232505] cpu 3 reg dump setup failed
128[ 0.232532] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
129[ 0.233158] msm_rpm_dev_probe: APSS-RPM communication over GLINK
130[ 0.240734] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
131[ 0.242110] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
132[ 0.246500] pmi8994_s2: 400 <--> 1065 mV at 525 mV normal idle
133[ 0.247082] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
134[ 0.247323] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
135[ 0.247813] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
136[ 0.248124] platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
137[ 0.253536] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
138[ 0.254463] <CORE> glink_core_register_transport: unable to create log context for [mpss:smem]
139[ 0.255058] <CORE> glink_core_register_transport: unable to create log context for [lpass:smem]
140[ 0.255715] <CORE> glink_core_register_transport: unable to create log context for [dsps:smem]
141[ 0.256222] <CORE> glink_core_register_transport: unable to create log context for [rpm:smem]
142[ 0.256399] smd_channel_probe_now: allocation table not initialized
143[ 0.256547] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
144[ 0.257191] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
145[ 0.257277] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
146[ 0.257426] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
147[ 0.257661] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
148[ 0.261627] console [pstore0] enabled
149[ 0.261743] pstore: Registered ramoops as persistent store backend
150[ 0.261754] ramoops: attached 0x200000@0xac000000, ecc: 0/0
151[ 0.262886] apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
152[ 0.263225] apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
153[ 0.263567] apcc_l3_mem_acc_corner: 0 <--> 0 mV
154[ 0.263887] gfx_mem_acc_corner: 0 <--> 0 mV
155[ 0.264283] kryo0-retention: 468 <--> 892 mV at 520 mV
156[ 0.264477] kryo0: 468 <--> 892 mV at 754 mV
157[ 0.264628] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
158[ 0.264919] kryo1-retention: 468 <--> 892 mV at 520 mV
159[ 0.265113] kryo1: 468 <--> 892 mV at 754 mV
160[ 0.265255] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
161[ 0.269160] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
162[ 0.270435] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
163[ 0.287795] __of_mpm_init(): MPM driver mapping exists
164[ 0.289586] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
165[ 0.289730] i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
166[ 0.289745] i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
167[ 0.290074] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
168[ 0.290138] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
169[ 0.290150] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
170[ 0.290452] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
171[ 0.290506] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
172[ 0.290519] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
173[ 0.290786] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
174[ 0.290838] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
175[ 0.290850] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
176[ 0.291073] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
177[ 0.291124] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
178[ 0.291135] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
179[ 0.291264] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
180[ 0.292053] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
181[ 0.292477] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
182[ 0.292839] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
183[ 0.293255] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
184[ 0.293610] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
185[ 0.294028] pm8994_s3: 1300 mV normal idle
186[ 0.294435] pm8994_s4: 1800 mV normal idle
187[ 0.294842] pm8994_s5: 2150 mV normal idle
188[ 0.295245] pm8994_s7: 800 mV normal idle
189[ 0.295661] pm8994_l1: 1000 mV normal idle
190[ 0.296069] pm8994_l2: 1250 mV normal idle
191[ 0.296717] pm8994_l3: 1100 mV normal idle
192[ 0.297135] pm8994_l4: 1225 mV normal idle
193[ 0.297550] pm8994_l6: 1200 mV normal idle
194[ 0.297951] pm8994_l8: 1800 mV normal idle
195[ 0.298363] pm8994_l9: 1800 mV normal idle
196[ 0.298761] pm8994_l10: 1800 mV normal idle
197[ 0.299168] pm8994_l11: 1150 mV normal idle
198[ 0.299576] pm8994_l12: 1800 mV normal idle
199[ 0.300348] pm8994_l13: 29500 <--> 2950 mV at 2950 mV normal idle
200[ 0.300766] pm8994_l14: 1800 mV normal idle
201[ 0.301429] pm8994_l15: 1800 mV normal idle
202[ 0.301843] pm8994_l16: 2700 mV normal idle
203[ 0.302242] pm8994_l17: 2600 mV normal idle
204[ 0.302657] pm8994_l18: 2700 <--> 2900 mV at 2700 mV normal idle
205[ 0.303012] pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
206[ 0.303424] pm8994_l19: 3000 mV normal idle
207[ 0.303833] pm8994_l20: 2950 mV normal idle
208[ 0.304241] pm8994_l21: 2950 mV normal idle
209[ 0.304643] pm8994_l22: 3000 <--> 3300 mV at 3000 mV normal idle
210[ 0.305044] pm8994_l23: 2800 mV normal idle
211[ 0.305448] pm8994_l24: 3075 mV normal idle
212[ 0.305865] pm8994_l25: 1200 mV normal idle
213[ 0.306498] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
214[ 0.306866] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
215[ 0.307271] pm8994_l27: 1200 mV normal idle
216[ 0.307691] pm8994_l28: 925 mV normal idle
217[ 0.308305] pm8994_l29: 2800 mV normal idle
218[ 0.308709] pm8994_l30: 1800 mV normal idle
219[ 0.309116] pm8994_l32: 1800 mV normal idle
220[ 0.309511] pm8994_lvs1: no parameters
221[ 0.309874] pm8994_lvs2: no parameters
222[ 0.310291] pmi8994_s1: 1025 mV normal idle
223[ 0.310698] pmi8994_boost_5v: no parameters
224[ 0.310791] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
225[ 0.310889] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
226[ 0.311160] pmi8994_boost_pin_ctrl: no parameters
227[ 0.311206] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
228[ 0.311291] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
229[ 0.311611] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
230[ 0.311951] pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
231[ 0.312158] pm8994_s11_avs_limit: 470 <--> 1140 mV
232[ 0.312283] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
233[ 0.312828] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
234[ 0.313260] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
235[ 0.313322] i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
236[ 0.313334] i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
237[ 0.313585] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
238[ 0.313638] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
239[ 0.313650] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
240[ 0.313922] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
241[ 0.313974] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
242[ 0.313986] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
243[ 0.314248] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
244[ 0.314300] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
245[ 0.314312] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
246[ 0.314537] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
247[ 0.314588] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
248[ 0.314600] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
249[ 0.314804] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
250[ 0.333678] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
251[ 0.334664] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
252[ 0.334680] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
253[ 0.334691] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
254[ 0.334894] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
255[ 0.334908] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
256[ 0.334923] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
257[ 0.335148] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
258[ 0.335160] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
259[ 0.335169] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
260[ 0.344351] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
261[ 0.346035] pmi8994_boost_5v: no parameters
262[ 0.346120] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
263[ 0.346216] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
264[ 0.346403] pmi8994_boost_pin_ctrl: no parameters
265[ 0.346446] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
266[ 0.346531] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
267[ 0.347007] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
268[ 0.347019] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 2
269[ 0.347029] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
270[ 0.347038] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
271[ 0.347048] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
272[ 0.347059] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
273[ 0.347240] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=80000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
274[ 0.347433] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 565000 uV
275[ 0.347443] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 635000 uV
276[ 0.347452] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 735000 uV
277[ 0.347461] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 900000 uV
278[ 0.347563] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 246
279[ 0.347574] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 363, quot_offset[ 7]= 95
280[ 0.347583] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 576, quot_offset[ 7]= 210
281[ 0.347592] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 927, quot_offset[ 7]= 350
282[ 0.347720] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
283[ 0.347730] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 2
284[ 0.347740] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
285[ 0.347749] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
286[ 0.347759] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
287[ 0.347770] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
288[ 0.347912] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 565000 uV
289[ 0.347921] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 635000 uV
290[ 0.347929] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 735000 uV
291[ 0.347937] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 900000 uV
292[ 0.347948] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: CBF offset open-loop= 535000 uV
293[ 0.347957] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused LowSVS: CBF offset open-loop= 655000 uV
294[ 0.347965] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: CBF offset open-loop= 655000 uV
295[ 0.347973] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: CBF offset open-loop= 765000 uV
296[ 0.347981] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: CBF offset open-loop= 910000 uV
297[ 0.348024] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 246
298[ 0.348034] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 363, quot_offset[ 7]= 95
299[ 0.348043] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 576, quot_offset[ 7]= 210
300[ 0.348052] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 927, quot_offset[ 7]= 350
301[ 0.348153] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
302[ 0.348163] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 2
303[ 0.348173] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
304[ 0.348182] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
305[ 0.348191] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
306[ 0.348202] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
307[ 0.348377] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=130000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
308[ 0.348568] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 585000 uV
309[ 0.348578] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 665000 uV
310[ 0.348587] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 735000 uV
311[ 0.348595] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop=1070000 uV
312[ 0.348715] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 285
313[ 0.348726] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 429, quot_offset[ 7]= 120
314[ 0.348735] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 579, quot_offset[ 7]= 150
315[ 0.348744] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1227, quot_offset[ 7]= 645
316[ 0.349235] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
317[ 0.349355] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
318[ 0.349569] apc0_cbf_corner: 0 <--> 0 mV at 0 mV
319[ 0.352138] cpr3_regulator_measure_aging: apcc: average quotient delta=16 (count=10)
320[ 0.352165] cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=1875 uV
321[ 0.352310] apc1_corner: 0 <--> 0 mV at 0 mV
322[ 0.353752] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: speed bin = 0
323[ 0.353769] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 1
324[ 0.353780] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
325[ 0.354075] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 640000 uV
326[ 0.354085] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 685000 uV
327[ 0.354095] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 815000 uV
328[ 0.354104] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 945000 uV
329[ 0.354273] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
330[ 0.354401] gfx_corner: 0 <--> 0 mV at 0 mV
331[ 0.355631] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
332[ 0.355713] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
333[ 0.355725] i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
334[ 0.356492] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
335[ 0.356564] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
336[ 0.356577] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
337[ 0.357368] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
338[ 0.357439] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
339[ 0.357452] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
340[ 0.358015] i2c i2c-7: Failed to register i2c client ptn5150 at 0x1d (-16)
341[ 0.358027] i2c i2c-7: of_i2c: Failure registering /soc/i2c@75b5000/ptn5150@1d
342[ 0.358286] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
343[ 0.358356] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
344[ 0.358368] i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
345[ 0.358980] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
346[ 0.359050] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
347[ 0.359062] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
348[ 0.359980] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
349[ 0.361790] clock-cpu-8996: set OPP pair (307200000 Hz, 555000 uv) on cpu0
350[ 0.361839] clock-cpu-8996: set OPP pair (2188800000 Hz, 1035000 uv) on cpu0
351[ 0.361859] clock-cpu-8996: set OPP pair (307200000 Hz, 555000 uv) on cpu1
352[ 0.361898] clock-cpu-8996: set OPP pair (2188800000 Hz, 1035000 uv) on cpu1
353[ 0.361919] clock-cpu-8996: set OPP pair (307200000 Hz, 575000 uv) on cpu2
354[ 0.361979] clock-cpu-8996: set OPP pair (2342400000 Hz, 1055000 uv) on cpu2
355[ 0.361998] clock-cpu-8996: set OPP pair (307200000 Hz, 575000 uv) on cpu3
356[ 0.362053] clock-cpu-8996: set OPP pair (2342400000 Hz, 1055000 uv) on cpu3
357[ 0.362171] clock-cpu-8996: set OPP pair (192000000 Hz, 540000 uv) on soc:qcom,m4m
358[ 0.362211] clock-cpu-8996: set OPP pair (1593600000 Hz, 925000 uv) on soc:qcom,m4m
359[ 0.362536] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
360[ 0.362867] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 570000 uV) on b00000.qcom,kgsl-3d0
361[ 0.362904] gfx3d_clk_src_v2: set OPP pair(652800000 Hz: 920000 uV) on b00000.qcom,kgsl-3d0
362[ 0.364430] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
363[ 0.364636] pmi8994_boost_5v: no parameters
364[ 0.364702] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
365[ 0.364798] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
366[ 0.364983] pmi8994_boost_pin_ctrl: no parameters
367[ 0.365028] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
368[ 0.365115] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
369[ 0.403560] socinfo_print: v0.11, id=305, ver=1.1, raw_id=95, raw_ver=1, hw_plat=8, hw_plat_ver=65536
370[ 0.403560] accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=3951724229 num_pmics=2
371[ 0.403839] gdsc_mmagic_bimc: no parameters
372[ 0.404682] rome_vreg: no parameters
373[ 0.405362] vgaarb: loaded
374[ 0.407081] SCSI subsystem initialized
375[ 0.408315] usbcore: registered new interface driver usbfs
376[ 0.408360] usbcore: registered new interface driver hub
377[ 0.408501] usbcore: registered new device driver usb
378[ 0.408975] soc:usb_nop_phy supply vcc not found, using dummy regulator
379[ 0.409761] media: Linux media interface: v0.10
380[ 0.409810] Linux video capture interface: v2.00
381[ 0.520214] cpufreq: driver msm up and running
382[ 0.520802] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
383[ 0.521289] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
384[ 0.521790] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
385[ 0.522244] ION heap system created
386[ 0.522396] ION heap adsp created at 0x00000000ff800000 with size 400000
387[ 0.522406] ION heap qsecom created at 0x00000000fe400000 with size 1400000
388[ 0.522414] ION heap secure_display created at 0x00000000f8800000 with size 5c00000
389[ 0.522422] ION heap secure_heap created
390[ 0.523174] msm_bus_fabric_init_driver
391[ 0.525906] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
392[ 0.525919] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
393[ 0.528549] msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
394[ 0.528975] msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
395[ 0.535352] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
396[ 0.535368] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
397[ 0.535378] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
398[ 0.535480] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
399[ 0.535505] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
400[ 0.535526] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
401[ 0.535546] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
402[ 0.535567] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
403[ 0.535586] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
404[ 0.535605] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
405[ 0.537195] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
406[ 0.537216] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
407[ 0.537337] input: qpnp_pon as /devices/virtual/input/input0
408[ 0.537819] pon_spare_reg: no parameters
409[ 0.537874] qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
410[ 0.537933] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
411[ 0.537947] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
412[ 0.538108] PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
413[ 0.538204] PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
414[ 0.539486] ipa ipa_uc_state_check:291 uC interface not initialized
415[ 0.539498] ipa ipa_sps_irq_control_all:932 EP (2) not allocated.
416[ 0.539502] ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
417[ 0.541264] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000000684000
418[ 0.541283] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000000684000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000000684000
419[ 0.541307] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000000684000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000000684000
420[ 0.541335] sps:BAM 0x0000000000684000 is registered.[ 0.541959] ipa ipa_uc_state_check:291 uC interface not initialized
421[ 0.542150] sps:BAM 0x0000000000684000 (va:0xffffff8001f40000) enabled: ver:0x27, number of pipes:20
422[ 0.543667] ipa ipa_uc_state_check:291 uC interface not initialized
423[ 0.551472] ipa ipa_uc_state_check:291 uC interface not initialized
424[ 0.553139] IPA driver initialization was successful.
425[ 0.554394] gdsc_mmagic_video: no parameters
426[ 0.554589] gdsc_mmagic_mdss: no parameters
427[ 0.554748] gdsc_mmagic_camss: no parameters
428[ 0.554961] gdsc_venus: no parameters
429[ 0.554985] gdsc_venus: supplied by gdsc_mmagic_video
430[ 0.555148] gdsc_venus_core0: fast normal
431[ 0.555291] gdsc_venus_core1: fast normal
432[ 0.555474] gdsc_camss_top: no parameters
433[ 0.555495] gdsc_camss_top: supplied by gdsc_mmagic_camss
434[ 0.555648] gdsc_vfe0: no parameters
435[ 0.555667] gdsc_vfe0: supplied by gdsc_camss_top
436[ 0.555835] gdsc_vfe1: no parameters
437[ 0.555857] gdsc_vfe1: supplied by gdsc_camss_top
438[ 0.556044] gdsc_mdss: no parameters
439[ 0.556065] gdsc_mdss: supplied by gdsc_mmagic_mdss
440[ 0.556303] gdsc_jpeg: no parameters
441[ 0.556322] gdsc_jpeg: supplied by gdsc_camss_top
442[ 0.556488] gdsc_cpp: no parameters
443[ 0.556509] gdsc_cpp: supplied by gdsc_camss_top
444[ 0.556659] gdsc_pcie_0: no parameters
445[ 0.556782] gdsc_pcie_1: no parameters
446[ 0.556917] gdsc_pcie_2: no parameters
447[ 0.557052] gdsc_usb30: no parameters
448[ 0.557177] gdsc_ufs: no parameters
449[ 0.557363] gdsc_fd: no parameters
450[ 0.557384] gdsc_fd: supplied by gdsc_camss_top
451[ 0.557526] gdsc_gpu: no parameters
452[ 0.557692] gdsc_gpu_gx: no parameters
453[ 0.558041] gdsc_gpu_gx: supplied by gfx_corner
454[ 0.558226] gdsc_hlos1_vote_aggre0_noc: no parameters
455[ 0.558364] gdsc_hlos1_vote_lpass_adsp: no parameters
456[ 0.558492] gdsc_hlos1_vote_lpass_core: no parameters
457[ 0.558631] gdsc_aggre0_noc: no parameters
458[ 0.561050] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
459[ 0.561078] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
460[ 0.563135] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
461[ 0.563282] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
462[ 0.563296] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
463[ 0.564526] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
464[ 0.565121] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
465[ 0.565221] mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
466[ 0.565236] mdss_pll_probe: Unable to get the cell-index rc=-22
467[ 0.588199] arm-smmu d80000.arm,smmu-jpeg: found 4 context interrupt(s) but have 3 context banks. assuming 3 context interrupts.
468[ 0.598847] arm-smmu b40000.arm,smmu-kgsl: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts.
469[ 0.610099] arm-smmu da0000.arm,smmu-vfe: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts.
470[ 0.618055] arm-smmu d40000.arm,smmu-venus: found 11 context interrupt(s) but have 7 context banks. assuming 7 context interrupts.
471[ 0.626775] arm-smmu d00000.arm,smmu-mdp: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts.
472[ 0.638916] arm-smmu d20000.arm,smmu-rot: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts.
473[ 0.650425] arm-smmu d60000.arm,smmu-cpp_fd: found 4 context interrupt(s) but have 3 context banks. assuming 3 context interrupts.
474[ 0.660742] arm-smmu 1600000.arm,smmu-lpass_q6: found 16 context interrupt(s) but have 12 context banks. assuming 12 context interrupts.
475[ 0.668085] arm-smmu 1640000.arm,smmu-anoc0: found 6 context interrupt(s) but have 7 context banks. assuming 7 context interrupts.
476[ 0.675620] arm-smmu 1660000.arm,smmu-anoc1: found 8 context interrupt(s) but have 4 context banks. assuming 4 context interrupts.
477[ 0.684874] arm-smmu 1680000.arm,smmu-anoc2: found 12 context interrupt(s) but have 8 context banks. assuming 8 context interrupts.
478[ 0.687789] Advanced Linux Sound Architecture Driver Initialized.
479[ 0.688374] Bluetooth: ffffffc1764bbd18
480[ 0.688463] NET: Registered protocol family 31
481[ 0.688476] Bluetooth: ffffffc1764bbd18
482[ 0.688492] Bluetooth: ffffffc1764bbcf8Bluetooth: ffffffc1764bbcc8
483[ 0.688538] Bluetooth: ffffffc1764bbcd8[ 0.689006] cfg80211: Calling CRDA to update world regulatory domain
484[ 0.689034] cfg80211: World regulatory domain updated:
485[ 0.689045] cfg80211: DFS Master region: unset
486[ 0.689054] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
487[ 0.689057] nfc: nfc_init: NFC Core ver 0.1
488[ 0.689082] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
489[ 0.689092] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
490[ 0.689095] NET: Registered protocol family 39
491[ 0.689107] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
492[ 0.689115] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
493[ 0.689123] pcie:pcie_init.
494[ 0.689125] pcie_init: unable to create IPC log context for pcie0-short
495[ 0.689126] pcie_init: unable to create IPC log context for pcie0-long
496[ 0.689128] pcie_init: unable to create IPC log context for pcie0-dump
497[ 0.689130] pcie_init: unable to create IPC log context for pcie1-short
498[ 0.689132] pcie_init: unable to create IPC log context for pcie1-long
499[ 0.689133] pcie_init: unable to create IPC log context for pcie1-dump
500[ 0.689134] pcie_init: unable to create IPC log context for pcie2-short
501[ 0.689136] pcie_init: unable to create IPC log context for pcie2-long
502[ 0.689137] pcie_init: unable to create IPC log context for pcie2-dump
503[ 0.689184] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
504[ 0.689193] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
505[ 0.689201] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
506[ 0.689210] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
507[ 0.691394] 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
508[ 0.694454] msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
509[ 0.697111] pmi8994_boost_5v: no parameters
510[ 0.697202] pmi8994_boost_5v: supplied by pon_spare_reg
511[ 0.697454] pmi8994_boost_pin_ctrl: no parameters
512[ 0.697485] pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
513[ 0.698235] Switched to clocksource arch_sys_counter
514[ 0.698908] bcl_peripheral:bcl_perph_init BCL Initialized
515[ 0.701395] NET: Registered protocol family 2
516[ 0.702185] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
517[ 0.702407] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
518[ 0.703591] TCP: Hash tables configured (established 65536 bind 65536)
519[ 0.703772] TCP: reno registered
520[ 0.703817] UDP hash table entries: 4096 (order: 5, 131072 bytes)
521[ 0.703908] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
522[ 0.704390] NET: Registered protocol family 1
523[ 0.705042] Trying to unpack rootfs image as initramfs...
524[ 0.739133] Freeing initrd memory: 1660K (ffffffc002200000 - ffffffc00239f000)
525[ 0.741305] kryo perfevents: CPU pmu for kryo-pmuv3 detected
526[ 0.746946] futex hash table entries: 1024 (order: 5, 131072 bytes)
527[ 0.747121] audit: initializing netlink subsys (disabled)
528[ 0.747249] audit: type=2000 audit(0.739:1): initialized
529[ 0.747914] vmscan: error setting kswapd cpu affinity mask
530[ 0.751796] ntfs: driver 2.1.31 [Flags: R/O].
531[ 0.751925] fuse init (API version 7.23)
532[ 0.754204] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
533[ 0.754238] io scheduler noop registered
534[ 0.754354] io scheduler cfq registered (default)
535[ 0.754367] io scheduler test-iosched registered
536[ 0.772177] mdss_mdp_parse_dt_hw_settings: MDSS VBIF settings not found
537[ 0.772228] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-smp-data : doesn't exist in device tree
538[ 0.772278] mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:0 num:0 ndx:0x1 prio:0
539[ 0.772288] mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:4 num:1 ndx:0x2 prio:1
540[ 0.772297] mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:8 num:2 ndx:0x4 prio:2
541[ 0.772308] mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:1 num:3 ndx:0x8 prio:4
542[ 0.772316] mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:5 num:4 ndx:0x10 prio:5
543[ 0.772325] mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:9 num:5 ndx:0x20 prio:6
544[ 0.772335] mdss_mdp_pipe_addr_setup: type:3 ftchid:0 xinid:2 num:6 ndx:0x40 prio:8
545[ 0.772343] mdss_mdp_pipe_addr_setup: type:3 ftchid:0 xinid:10 num:7 ndx:0x80 prio:9
546[ 0.772352] mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:12 num:8 ndx:0x100 prio:3
547[ 0.772361] mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:13 num:9 ndx:0x200 prio:7
548[ 0.772376] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
549[ 0.772401] mdss_mdp_pipe_addr_setup: type:4 ftchid:-1 xinid:7 num:10 ndx:0x400 prio:0
550[ 0.772410] mdss_mdp_pipe_addr_setup: type:4 ftchid:-1 xinid:7 num:11 ndx:0x800 prio:1
551[ 0.772419] mdss_mdp_parse_dt_pipe: dedicated vp cursors detected, num=2
552[ 0.772486] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
553[ 0.772502] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels : doesn't exist in device tree
554[ 0.772545] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-smp-data : doesn't exist in device tree
555[ 0.773602] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
556[ 0.775379] xlog_status: enable:0, panic:1, dump:2
557[ 0.775730] OF: no ranges; cannot translate
558[ 0.775758] OF: no ranges; cannot translate
559[ 0.776258] OF: no ranges; cannot translate
560[ 0.776276] OF: no ranges; cannot translate
561[ 0.776373] OF: no ranges; cannot translate
562[ 0.776387] OF: no ranges; cannot translate
563[ 0.776503] OF: no ranges; cannot translate
564[ 0.776516] OF: no ranges; cannot translate
565[ 0.776846] mdss_smmu_attach_v2: iommu device not attached for domain[0]
566[ 0.776864] mdss_mdp_clk_ctrl: IOMMU attach failed
567[ 0.776876] No change in context(0==0), skip
568[ 0.778566] mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on
569[ 0.785000] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
570[ 0.785274] mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
571[ 0.785412] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
572[ 0.785574] mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
573[ 0.789100] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
574[ 0.789472] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3fa5_1080p_cmd:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_samsung_s6e3fa5_1080p_cmd
575[ 0.789493] mdss_dsi_panel_init: Panel Name = samsung s6e3fa5 1080p cmd mode dsi panel
576[ 0.789570] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3fa5_1080p_cmd" (ffffffc1764bb340)
577[ 0.789583] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
578[ 0.789589] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
579[ 0.789639] mdss_dsi_parse_panel_features: partial_update_enabled=0
580[ 0.789647] mdss_dsi_parse_panel_features: ulps feature enabled
581[ 0.789655] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
582[ 0.789663] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
583[ 0.789675] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
584[ 0.790356] mdss_dsi_parse_ctrl_params:3756 Unable to read qcom,display-id, data=0000000000000000,len=20
585[ 0.790558] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
586[ 0.790615] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
587[ 0.790641] mdss_dsi_retrieve_ctrl_resources+0x170/0x1f4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
588[ 0.790648] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80020d0000 ctrl_size=400 phy_base=ffffff80020d2400 phy_size=588
589[ 0.790656] dsi_panel_device_register: Using default BTA for ESD check
590[ 0.790812] dsi_panel_device_register: Continuous splash enabled
591[ 0.791439] mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
592[ 0.792561] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
593[ 0.793545] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
594[ 0.793931] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3fa5_1080p_cmd:1:none:cfg:single_dsi panel_name:none
595[ 0.793944] mdss_dsi_config_panel: can't find panel node 0:qcom,mdss_dsi_samsung_s6e3fa5_1080p_cmd:1:none:cfg:single_dsi
596[ 0.793951] mdss_dsi_ctrl_probe: panel configuration failed
597[ 0.793982] mdss_dsi_ctrl: probe of 996000.qcom,mdss_dsi_ctrl1 failed with error -22
598[ 0.795515] mdss_dsi_status_init: DSI status check interval:5000
599[ 0.796202] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
600[ 0.799256] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
601[ 0.799789] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
602[ 0.800878] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
603[ 0.801026] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
604[ 0.801101] mdss_mdp_splash_parse_dt: splash mem child node is not present
605[ 0.805252] glink_loopback_server_init: unable to create log context
606[ 0.805442] msm_smp2p_init: unable to create log context
607[ 0.808905] qmi_log_init: Unable to create QMI IPC logging for Req/Resp
608[ 0.808929] logging for Indications: Unable to create QMI IPC qmi_log_init[ 0.821574] l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
609[ 0.835811] uart_tx_gpio is not available
610[ 0.835838] uart_rx_gpio is not available
611[ 0.835844] uart_cts_gpio is not available
612[ 0.835851] uart_rfr_gpio is not available
613[ 0.836079] msm_serial_hs 7570000.uart: msm_hs_probe: error creating logging context
614[ 0.836809] sps: BAM device 0x0000000007544000 is not registered yet.
615[ 0.836834] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000007544000
616[ 0.836841] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000007544000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000007544000
617[ 0.836856] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000007544000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000007544000
618[ 0.836874] sps:BAM 0x0000000007544000 is registered.[ 0.837288] msm_serial_hs 7570000.uart: msm_hs_probe: error creating tx logging context
619[ 0.837297] msm_serial_hs 7570000.uart: msm_hs_probe: error creating rx logging context
620[ 0.837304] msm_serial_hs 7570000.uart: msm_hs_probe: error creating usr logging context
621[ 0.838529] 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 20, base_baud = 460800) is a MSM HS UART
622[ 0.840901] msm_serial_hs module loaded
623[ 0.840948] smd_tty_log_init: Unable to create IPC log
624[ 0.844531] diag: Failed to create IPC logging context
625[ 0.859034] brd: module loaded
626[ 0.860227] loop: module loaded
627[ 0.860370] at24 6-0051: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
628[ 0.861476] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
629[ 0.861542] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
630[ 0.861552] QSEECOM: qseecom_probe: no-clock-support=0x1[ 0.861562] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
631[ 0.863665] i2c-core: driver [tusb320] using legacy suspend method
632[ 0.863684] i2c-core: driver [tusb320] using legacy resume method
633[ 0.863730] i2c-core: driver [fusb301] using legacy suspend method
634[ 0.863736] i2c-core: driver [fusb301] using legacy resume method
635[ 0.863768] i2c-core: driver [ptn5150] using legacy suspend method
636[ 0.863775] i2c-core: driver [ptn5150] using legacy resume method
637[ 0.866176] gpio_dev_probe
638[ 0.866375] i= 1 gpio=: 97
639[ 0.866419] i= 2 gpio=: 98
640[ 0.866471] i= 3 gpio=: 100
641[ 0.866536] i= 4 gpio=: 115
642[ 0.866614] i= 5 gpio=: 127
643[ 0.866705] i= 6 gpio=: 133
644[ 0.866809] i= 7 gpio=: 136
645[ 0.866845] gpio_pinctrl_init
646[ 0.867498] gpio_dev_probe ok!
647[ 0.867905] i2c-core: driver [tabla-i2c-core] using legacy suspend method
648[ 0.867913] i2c-core: driver [tabla-i2c-core] using legacy resume method
649[ 0.867971] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
650[ 0.867976] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
651[ 0.868026] i2c-core: driver [tasha-i2c-core] using legacy suspend method
652[ 0.868032] i2c-core: driver [tasha-i2c-core] using legacy resume method
653[ 0.870635] Loading pn544 driver
654[ 0.870775] Enter pn544_probe !!!
655[ 0.871210] pn544_parse_dt: 9, 94, 12, 1015 ,1018, 0
656[ 0.871361] successfully got regulator_s4
657[ 0.871558] successfully set regulator voltage_s4
658[ 0.871567] get BBCLK2!!!
659[ 0.871630] clk_prepare_enable. ret = 0
660[ 0.871785] pn544_probe : requesting IRQ 298
661[ 0.873433] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
662[ 0.873461] qce 660000.qcedev: CE device = 0x0
663[ 0.873461] , IO base, CE = 0xffffff80024c0000
664[ 0.873461] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
665[ 0.873461] IO base BAM = 0x (null)
666[ 0.873461] BAM IRQ 156
667[ 0.873461] Engines Availability = 0x2011053
668[ 0.873522] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000000644000
669[ 0.873530] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000000644000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000000644000
670[ 0.873546] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000000644000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000000644000
671[ 0.873564] sps:BAM 0x0000000000644000 is registered.[ 0.873813] sps:BAM 0x0000000000644000 (va:0xffffff80033c0000) enabled: ver:0x27, number of pipes:16
672[ 0.874050] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
673[ 0.882317] qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
674[ 0.882346] qcrypto 660000.qcrypto: CE device = 0x0
675[ 0.882346] , IO base, CE = 0xffffff80034c0000
676[ 0.882346] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
677[ 0.882346] IO base BAM = 0x (null)
678[ 0.882346] BAM IRQ 156
679[ 0.882346] Engines Availability = 0x2011053
680[ 0.882751] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
681[ 0.888215] qcrypto 660000.qcrypto: qcrypto-ecb-aes
682[ 0.888355] qcrypto 660000.qcrypto: qcrypto-cbc-aes
683[ 0.888465] qcrypto 660000.qcrypto: qcrypto-ctr-aes
684[ 0.888558] qcrypto 660000.qcrypto: qcrypto-ecb-des
685[ 0.888624] qcrypto 660000.qcrypto: qcrypto-cbc-des
686[ 0.888688] qcrypto 660000.qcrypto: qcrypto-ecb-3des
687[ 0.888750] qcrypto 660000.qcrypto: qcrypto-cbc-3des
688[ 0.888815] qcrypto 660000.qcrypto: qcrypto-xts-aes
689[ 0.888885] qcrypto 660000.qcrypto: qcrypto-sha1
690[ 0.888948] qcrypto 660000.qcrypto: qcrypto-sha256
691[ 0.889010] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
692[ 0.889073] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
693[ 0.889135] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
694[ 0.889199] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
695[ 0.889261] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
696[ 0.889325] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
697[ 0.889389] qcrypto 660000.qcrypto: qcrypto-hmac-sha1
698[ 0.889452] qcrypto 660000.qcrypto: qcrypto-hmac-sha256
699[ 0.889524] qcrypto 660000.qcrypto: qcrypto-aes-ccm
700[ 0.889589] qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
701[ 0.893124] ICE IRQ = 28
702[ 0.899198] qcom_ice_get_pdevice: found ice device ffffffc0b5ab1400
703[ 0.899221] qcom_ice_get_pdevice: matching platform device ffffffc175d15c00
704[ 0.899734] scm_call failed: func id 0x42000c02, arginfo: 0x2, args: 0x13, 0x0, 0x0, 0x0, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
705[ 0.900529] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -517
706[ 0.900544] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -517
707[ 0.901712] scsi host0: ufshcd
708[ 0.905527] qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002490000
709[ 0.921756] SCSI Media Changer driver v0.25
710[ 0.925158] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
711[ 0.926330] tun: Universal TUN/TAP device driver, 1.6
712[ 0.926344] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
713[ 0.926403] PPP generic driver version 2.4.2
714[ 0.926470] PPP BSD Compression module registered
715[ 0.926479] PPP Deflate Compression module registered
716[ 0.926515] PPP MPPE Compression module registered
717[ 0.926525] NET: Registered protocol family 24
718[ 0.939416] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
719[ 1.025641] PCI host bridge /soc/qcom,pcie@00600000 ranges:
720[ 1.025659] No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
721[ 1.025682] IO 0x0c200000..0x0c2fffff -> 0x0c200000
722[ 1.025693] MEM 0x0c300000..0x0cffffff -> 0x0c300000
723[ 1.025787] pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
724[ 1.025799] pci_bus 0000:00: root bus resource [bus 00-ff]
725[ 1.025808] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
726[ 1.025814] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
727[ 1.025877] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
728[ 1.025970] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
729[ 1.026107] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
730[ 1.026269] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
731[ 1.026910] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
732[ 1.026935] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c5fffff]
733[ 1.026944] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
734[ 1.026964] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
735[ 1.027104] pci 0000:00:00.0: PCI bridge to [bus 01]
736[ 1.027131] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff]
737[ 1.027448] cnss_probe: CNSS ramdump will not be collected
738[ 1.040750] cnss: Platform driver probed successfully.
739[ 1.042406] msm_sharedmem: sharedmem_register_qmi: qmi init successful
740[ 1.044706] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
741[ 1.054090] msm-dwc3 6a00000.ssusb: unable to get dbm device
742[ 1.058883] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
743[ 1.058908] ehci-pci: EHCI PCI platform driver
744[ 1.058980] usbcore: registered new interface driver usb-storage
745[ 1.059054] usbcore: registered new interface driver usbserial
746[ 1.059812] gbridge_init: gbridge_init successs.
747[ 1.059934] mousedev: PS/2 mouse device common for all mice
748[ 1.060107] usbcore: registered new interface driver xpad
749[ 1.060116] synaptics,s3320: tpd_driver_init enter
750[ 1.061084] synaptics,s3320: before on cpu [1]
751[ 1.061104] synaptics,s3320: check CPU[0] is [online]
752[ 1.061942] touchkey,s1302: boot_time: before optimize [synaptics_ts_probe] on cpu 1
753[ 1.061961] touchkey,s1302: boot_time: [synaptics_ts_probe] CPU0 is online
754[ 1.064552] input: hbtp_vm as /devices/virtual/input/input1
755[ 1.066123] input: tri-state-key as /devices/soc/soc:tri_state_key/input/input2
756[ 1.066409] switch_data->key3_gpio=1013
757[ 1.066423] switch_data->key2_gpio=1012
758[ 1.066434] switch_data->key1_gpio=1014
759[ 1.068444] fpc1020_probe
760[ 1.068827] fpc1020 soc:fpc_fpc1020: fpc,irq-gpio - gpio: 95
761[ 1.068880] fpc1020 soc:fpc_fpc1020: fpc,reset-gpio - gpio: 86
762[ 1.068928] fpc1020 soc:fpc_fpc1020: fpc,gpio_id0 - gpio: 25
763[ 1.068937] fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id0_gpio=25)
764[ 1.068986] fpc1020 soc:fpc_fpc1020: fpc,gpio_id1 - gpio: 143
765[ 1.068993] fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id1_gpio=143)
766[ 1.069033] fpc1020 soc:fpc_fpc1020: fpc,gpio_1V8_EN - gpio: 14
767[ 1.069199] input: fpc1020 as /devices/virtual/input/input3
768[ 1.069503] fpc1020 soc:fpc_fpc1020: requested irq 384
769[ 1.069553] fpc1020 soc:fpc_fpc1020: fpc1020_probe: ok
770[ 1.071603] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
771[ 1.071838] i2c /dev entries driver
772[ 1.101278] vmem: Up and running with 4 banks of memory from [mem size 0x3e8a14e0c9 pref window disabled]
773[ 1.121169] msm_camera_pinctrl_init:1201 Getting pinctrl handle failed
774[ 1.121192] msm_camera_power_up:1242 Initialization of pinctrl failed
775[ 1.121201] msm_camera_request_gpio_table:732 invalid gpio_tbl 0000000000000000 / size 0
776[ 1.127095] msm_cci_init:1366: hw_version = 0x10040000
777[ 1.127159] qcom,slave-addr = 0xA0
778[ 1.132265] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
779[ 1.132819] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
780[ 1.133578] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
781[ 1.134142] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
782[ 1.134765] scsi 0:0:0:0: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
783[ 1.135442] scsi 0:0:0:1: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
784[ 1.135833] scsi 0:0:0:2: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
785[ 1.136161] qcom,slave-addr = 0xA0
786[ 1.136248] scsi 0:0:0:3: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
787[ 1.136633] scsi 0:0:0:4: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
788[ 1.137033] scsi 0:0:0:5: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0800 PQ: 0 ANSI: 6
789[ 1.137755] sd 0:0:0:0: [sda] 16384-byte physical blocks
790[ 1.138904] sd 0:0:0:1: [sdb] 16384-byte physical blocks
791[ 1.139131] sd 0:0:0:3: [sdd] 16384-byte physical blocks
792[ 1.139217] sd 0:0:0:2: [sdc] 16384-byte physical blocks
793[ 1.139454] sd 0:0:0:4: [sde] 16384-byte physical blocks
794[ 1.139721] sd 0:0:0:0: [sda] 16384-byte physical blocks
795[ 1.139947] sd 0:0:0:5: [sdf] 16384-byte physical blocks
796[ 1.141718] sd 0:0:0:1: [sdb] 16384-byte physical blocks
797[ 1.142639] sd 0:0:0:3: [sdd] 16384-byte physical blocks
798[ 1.142778] sd 0:0:0:2: [sdc] 16384-byte physical blocks
799[ 1.142887] sd 0:0:0:4: [sde] 16384-byte physical blocks
800[ 1.143474] sd 0:0:0:5: [sdf] 16384-byte physical blocks
801[ 1.143939] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15
802[ 1.145450] qcom,slave-addr = 0xA0
803[ 1.145520] sd 0:0:0:0: [sda] 16384-byte physical blocks
804[ 1.146716] sdb: sdb1
805[ 1.146986] sdd: sdd1 sdd2 sdd3
806[ 1.147313] sdf: sdf1 sdf2 sdf3 sdf4
807[ 1.147569] sdc: sdc1
808[ 1.147650] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34
809[ 1.147760] sd 0:0:0:3: [sdd] 16384-byte physical blocks
810[ 1.147765] sd 0:0:0:1: [sdb] 16384-byte physical blocks
811[ 1.149125] sd 0:0:0:5: [sdf] 16384-byte physical blocks
812[ 1.149606] sd 0:0:0:4: [sde] 16384-byte physical blocks
813[ 1.149847] sd 0:0:0:2: [sdc] 16384-byte physical blocks
814[ 1.154525] qcom,slave-addr = 0xA0
815[ 1.163439] qcom,slave-addr = 0xA0
816[ 1.172357] qcom,slave-addr = 0xA0
817[ 1.181255] qcom,slave-addr = 0xA0
818[ 1.190147] qcom,slave-addr = 0xA0
819[ 1.199044] qcom,slave-addr = 0xA0
820[ 1.210552] msm_camera_request_gpio_table:732 invalid gpio_tbl 0000000000000000 / size 0
821[ 1.214929] msm_cci_init:1366: hw_version = 0x10040000
822[ 1.214979] qcom,slave-addr = 0x20
823[ 1.230060] qcom,slave-addr = 0x20
824[ 1.250032] qcom,slave-addr = 0x20
825[ 1.270031] qcom,slave-addr = 0x20
826[ 1.290031] qcom,slave-addr = 0x20
827[ 1.310031] qcom,slave-addr = 0x20
828[ 1.330031] qcom,slave-addr = 0x20
829[ 1.350031] qcom,slave-addr = 0x20
830[ 1.360060] synaptics,s3320: after on cpu [0]
831[ 1.360073] synaptics,s3320: synaptics_ts_probe is called
832[ 1.360282] synaptics,s3320: synaptics_parse_dts ts->support_hw_poweroff =1
833[ 1.360293] synaptics,s3320: synaptics,tx-rx-num is 16 28
834[ 1.360301] synaptics,s3320: synaptic:ts->irq_gpio:125 irq_flags:8200 max_num 10
835[ 1.360687] touchkey,s1302: boot_time: after optimize call [synaptics_ts_probe] on cpu 0
836[ 1.360700] touchkey,s1302: synaptics_ts_probe is called
837[ 1.370037] qcom,slave-addr = 0x20
838[ 1.372361] qcom,slave-addr = 0x20
839[ 1.390034] qcom,slave-addr = 0x20
840[ 1.392348] qcom,slave-addr = 0x20
841[ 1.410036] qcom,slave-addr = 0x20
842[ 1.423603] MSM-CPP cpp_init_hardware:843 CPP HW Version: 0x60000000
843[ 1.423626] MSM-CPP cpp_init_hardware:861 stream_cnt:0
844[ 1.430859] __msm_jpeg_init:1537] Jpeg Device id 0
845[ 1.431990] __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
846[ 1.436745] msm_fd_hw_set_dt_parms_by_name: Error property does not exist
847[ 1.530149] msm_fd aa4000.qcom,fd: Face detection halt timeout
848[ 1.532904] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
849[ 1.533216] BQ: bq27541_battery_probe: probe sucdess
850[ 1.533660] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x18 (ok)
851[ 1.535550] BQ: check_bat_type: is_4p4v_bat=1,support_4p4v_bat=1
852[ 1.535597] i2c-core: driver [bq27541-battery] using legacy suspend method
853[ 1.535603] i2c-core: driver [bq27541-battery] using legacy resume method
854[ 1.536239] FASTCHG: dash_probe: dash_probe
855[ 1.550455] i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x19 (ok)
856[ 1.551037] synaptics,s3320: F12_2D_QUERY_BASE = 47
857 F12_2D_CMD_BASE = 0
858 F12_2D_CTRL_BASE = 15
859 F12_2D_DATA_BASE = 6
860
861[ 1.551473] synaptics,s3320: F34_FLASH_QUERY_BASE = 26
862[ 1.551473] F34_FLASH_CMD_BASE = 0
863[ 1.551473] F34_FLASH_CTRL_BASE = a
864[ 1.551473] F34_FLASH_DATA_BASE = 0
865[ 1.551473] synaptics,s3320: F54_QUERY_BASE = 47
866 F54_CMD_BASE = 46
867 F54_CTRL_BASE = e
868 F54_DATA_BASE = 0
869
870[ 1.552367] synaptics,s3320: before fw update bootloader_mode[0x0]
871[ 1.552591] synaptics,s3320: CURRENT_FIRMWARE_ID = 0x15811001
872[ 1.555037] synaptics,s3320: max_x = 1080,max_y = 1920; max_x_ic = 1079,max_y_ic = 1919
873[ 1.555631] synaptics,s3320: synaptics_soft_reset !!!
874[ 1.570041] FASTCHG: dash_probe: dash_probe success
875[ 1.572191] unable to find DT imem DLOAD mode node
876[ 1.573681] unable to find DT imem EDLOAD mode node
877[ 1.575158] unable to find DT imem dload-type node
878[ 1.605101] device-mapper: uevent: version 1.0.3
879[ 1.605317] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
880[ 1.605450] device-mapper: req-crypt: dm-req-crypt successfully initalized.
881[ 1.605450]
882[ 1.606737] bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
883[ 1.606890] bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
884[ 1.606898] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
885[ 1.606905] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
886[ 1.607666] sdhci: Secure Digital Host Controller Interface driver
887[ 1.607682] sdhci: Copyright(c) Pierre Ossman
888[ 1.607690] sdhci-pltfm: SDHCI platform and OF driver helper
889[ 1.613616] hidraw: raw HID events driver (C) Jiri Kosina
890[ 1.613876] usbcore: registered new interface driver usbhid
891[ 1.613883] usbhid: USB HID core driver
892[ 1.614295] ashmem: initialized
893[ 1.615368] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
894[ 1.624335] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
895[ 1.626261] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
896[ 1.626317] arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
897[ 1.630624] m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
898[ 1.635493] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
899[ 1.635627] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
900[ 1.635735] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
901[ 1.635839] devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
902[ 1.638612] probe: Failed to create IPC log context
903[ 1.640833] usbcore: registered new interface driver snd-usb-audio
904[ 1.643933] tfa98xx_i2c_probe
905[ 1.654943] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
906[ 1.655225] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
907[ 1.655236] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
908[ 1.655409] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
909[ 1.655419] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
910[ 1.655578] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
911[ 1.655587] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
912[ 1.655744] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
913[ 1.655754] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
914[ 1.655775] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
915[ 1.655936] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
916[ 1.655945] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
917[ 1.656098] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
918[ 1.656106] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Data Align from DT file qcom,msm-cpudai-tdm-data-align
919[ 1.656116] msm-dai-q6-tdm: probe of soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 failed with error -22
920[ 1.656271] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
921[ 1.656280] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Data Align from DT file qcom,msm-cpudai-tdm-data-align
922[ 1.656288] msm-dai-q6-tdm: probe of soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 failed with error -22
923[ 1.656437] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
924[ 1.656446] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
925[ 1.656470] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
926[ 1.656621] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
927[ 1.656630] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
928[ 1.656791] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
929[ 1.656800] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
930[ 1.656960] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
931[ 1.656969] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
932[ 1.657127] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
933[ 1.657136] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
934[ 1.657157] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
935[ 1.657318] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
936[ 1.657326] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
937[ 1.657490] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
938[ 1.657499] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
939[ 1.657662] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
940[ 1.657671] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
941[ 1.657824] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
942[ 1.657832] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
943[ 1.660968] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
944[ 1.672295] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
945[ 1.672574] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
946[ 1.674650] GACT probability NOT on
947[ 1.674667] Mirror/redirect action on
948[ 1.674685] u32 classifier
949[ 1.674688] Actions configured
950[ 1.674708] Netfilter messages via NETLINK v0.30.
951[ 1.674738] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
952[ 1.674899] ctnetlink v0.93: registering with nfnetlink.
953[ 1.675225] xt_time: kernel timezone is -0000
954[ 1.675362] ip_tables: (C) 2000-2006 Netfilter Core Team
955[ 1.675432] arp_tables: (C) 2002 David S. Miller
956[ 1.675454] TCP: westwood registered
957[ 1.675460] Initializing XFRM netlink socket
958[ 1.675632] NET: Registered protocol family 10
959[ 1.676082] mip6: Mobile IPv6
960[ 1.676103] ip6_tables: (C) 2000-2006 Netfilter Core Team
961[ 1.676174] sit: IPv6 over IPv4 tunneling driver
962[ 1.676394] NET: Registered protocol family 17
963[ 1.676410] NET: Registered protocol family 15
964[ 1.676430] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
965[ 1.676438] Ebtables v2.0 registered
966[ 1.676596] Bluetooth: ffffffc1764bbcd8
967[ 1.676606] Bluetooth: ffffffc1764bbcc8Bluetooth: ffffffc1764bbd08
968[ 1.676636] Bluetooth: ffffffc1764bbce8Bluetooth: ffffffc1764bbce8
969[ 1.676646] Bluetooth: ffffffc1764bbcc8Bluetooth: ffffffc1764bbd38
970[ 1.676657] Bluetooth: ffffffc1764bbd18[ 1.676679] l2tp_core: L2TP core driver, V2.0
971[ 1.676690] l2tp_ppp: PPPoL2TP kernel driver, V2.0
972[ 1.676696] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
973[ 1.676712] l2tp_netlink: L2TP netlink interface
974[ 1.676732] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
975[ 1.676737] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
976[ 1.677565] NET: Registered protocol family 27
977[ 1.677607] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [local_IPCRTR]
978[ 1.683508] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
979[ 1.686338] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006b04000
980[ 1.686348] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006b04000
981[ 1.686358] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006b04000
982[ 1.686367] sps:BAM 0x0000000006b04000 is registered.[ 1.687797] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
983[ 1.687876] SMBCHG: qpnp_battery_temp_region_set: set temp_region = 5
984[ 1.687947] smbcharger_charger_otg: no parameters
985[ 1.688044] smbcharger_external_otg: no parameters
986[ 1.688061] smbcharger_external_otg: supplied by pmi8994_boost_5v
987[ 1.688129] SMBCHG: smbchg_hw_init: enable APSD
988[ 1.688169] SMBCHG: smbchg_hw_init: disabe HVDCP
989[ 1.688362] SMBCHG: smbchg_charging_en: enable=1
990[ 1.688454] SMBCHG: smbchg_charging_en: enable=1
991[ 1.688476] SMBCHG: smbchg_usb_suspend: suspend=0
992[ 1.688820] SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 500, set to 500
993[ 1.710281] SMBCHG: src_detect_handler: chip->usb_present = 0 usb_present = 0 src_detect = 0 hvdcp_3_det_ignore_uv=0
994[ 1.710289] SMBCHG: handle_usb_removal: triggered
995[ 1.710292] SMBCHG: handle_usb_removal: switch off fastchg
996[ 1.710297] FASTCHG: usb_sw_gpio_set: set usb_sw_gpio = 0
997[ 1.710323] SMBCHG: qpnp_battery_temp_region_set: set temp_region = 8
998[ 1.710332] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1800, typeC_support_current_ma = 4000
999[ 1.710424] SMBCHG: smbchg_rerun_aicl: Rerunning AICL...
1000[ 1.723586] msm-usb-ssphy-qmp 7410000.ssphy: QMP PHY initialization timeout
1001[ 1.723592] msm-usb-ssphy-qmp 7410000.ssphy: USB3_PHY_PCS_STATUS:69696969
1002[ 1.723789] msm-dwc3 6a00000.ssusb: DWC3 in low power mode
1003[ 1.730293] synaptics,s3320: synaptics_tpedge_limitfunc limit_enable =1,mode:0x4b !
1004[ 1.730581] input: synaptics,s3320 as /devices/soc/75ba000.i2c/i2c-12/12-0020/input/input4
1005[ 1.770228] SMBCHG: smbchg_usb_update_online_work: chip->usb_online = -22, online = 0
1006[ 1.770330] SMBCHG: set_dash_charger_present: set_dash_charger_present error
1007[ 1.770354] SMBCHG: handle_usb_removal: triggered
1008[ 1.770357] SMBCHG: handle_usb_removal: switch off fastchg
1009[ 1.770361] FASTCHG: usb_sw_gpio_set: set usb_sw_gpio = 0
1010[ 1.770370] SMBCHG: qpnp_battery_temp_region_set: set temp_region = 8
1011[ 1.770515] SMBCHG: smbchg_usb_update_online_work: chip->usb_online = 0, online = 0
1012[ 1.770525] SMBCHG: set_dash_charger_present: set_dash_charger_present error
1013[ 1.788439] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1014[ 1.789340] qpnp-smbcharger qpnp-smbcharger-17: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=0
1015[ 1.790043] synaptics,s3320: synaptic:ts->irq is 414
1016[ 1.790782] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1017[ 1.791070] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1018[ 1.791317] tusb320 7-0060: tusb320_probe
1019[ 1.791619] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x21 (ok)
1020[ 1.791720] i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x60 MSTR_STS:0x0d1300c8 OPER:0x00000010
1021[ 1.791765] tusb320_read_reg:reg(0x0), ret(-107)
1022[ 1.791772] tusb320 7-0060: DEV_ID(0x0)!= 0x30
1023[ 1.791780] tusb320: probe of 7-0060 failed with error -22
1024[ 1.791815] fusb301 7-0021: fusb301_probe
1025[ 1.792070] fusb301 7-0021: fusb301_gpio_configure OK!
1026[ 1.792621] fusb301 7-0021: fusb301_probe OK!
1027[ 1.793829] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1028[ 1.794122] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1029[ 1.804514] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1030[ 1.804807] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1031[ 1.805235] ngd_msm_ctrl 91c0000.slim: error creating ipc_logging context
1032[ 1.806424] RNDIS_IPA module is loaded.
1033[ 1.806987] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1034[ 1.807309] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1035[ 1.807482] file system registered
1036[ 1.807516] mbim_init: initialize 1 instances
1037[ 1.807553] mbim_init: Initialized 1 ports
1038[ 1.808201] rndis_qc_init: initialize rndis QC instance
1039[ 1.808309] Number of LUNs=8
1040[ 1.808316] Mass Storage Function, version: 2009/09/11
1041[ 1.808321] LUN: removable file: (no medium)
1042[ 1.808331] Number of LUNs=1
1043[ 1.808355] LUN: removable file: (no medium)
1044[ 1.808359] Number of LUNs=1
1045[ 1.808481] android_usb gadget: android_usb ready
1046[ 1.809948] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1047[ 1.810308] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1048[ 1.810685] synaptics,s3320: synaptics_ts_probe 3203: normal end
1049[ 1.811000] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input5
1050[ 1.811378] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-01-17 06:32:22 UTC (1405942)
1051[ 1.812454] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1052[ 1.812907] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1053[ 1.814581] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1054[ 1.814887] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1055[ 1.816590] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1056[ 1.816892] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1057[ 1.818958] lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
1058[ 1.819185] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
1059[ 1.819303] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
1060[ 1.819417] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
1061[ 1.819530] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
1062[ 1.819643] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
1063[ 1.819754] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
1064[ 1.819869] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
1065[ 1.822564] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1066[ 1.822838] parse_cpu_levels: idx 1 545
1067[ 1.822846] parse_cpu_levels: idx 2 1785
1068[ 1.822850] parse_cpu_levels: idx 2 3025
1069[ 1.822886] parse_cpu_levels: idx 1 545
1070[ 1.822890] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1071[ 1.822893] parse_cpu_levels: idx 2 1785
1072[ 1.822896] parse_cpu_levels: idx 2 3025
1073[ 1.825264] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1074[ 1.825576] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1075[ 1.825721] qcom,qpnp-flash-led qpnp-flash-led-26: Unable to acquire pinctrl
1076[ 1.826868] rmnet_ipa started initialization
1077[ 1.826879] IPA SSR support = True
1078[ 1.826883] IPA ipa-loaduC = True
1079[ 1.826886] IPA SG support = True
1080[ 1.827795] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1081[ 1.828105] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1082[ 1.828286] ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1083[ 1.828294] ipa ipa_uc_state_check:296 uC is not loaded
1084[ 1.829041] rmnet_ipa completed initialization
1085[ 1.830742] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1086[ 1.831024] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1087[ 1.832049] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1088[ 1.832916] rome_vreg: disabling
1089[ 1.832925] gdsc_mmagic_bimc: disabling
1090[ 1.832964] kryo1-retention: disabling
1091[ 1.832969] kryo0-retention: disabling
1092[ 1.832972] gfx_mem_acc_corner: disabling
1093[ 1.832976] apcc_l3_mem_acc_corner: disabling
1094[ 1.832980] apc1_perfcl_mem_acc_corner: disabling
1095[ 1.832983] apc0_pwrcl_mem_acc_corner: disabling
1096[ 1.832991] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1097[ 1.833245] clock_late_init: Removing enables held for handed-off clocks
1098[ 1.833709] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1099[ 1.833988] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1100[ 1.836994] ALSA device list:
1101[ 1.837000] No soundcards found.
1102[ 1.837043] Warning: unable to open an initial console.
1103[ 1.837200] Freeing unused kernel memory: 300K (ffffffc001162000 - ffffffc0011ad000)
1104[ 1.837210] Freeing alternatives memory: 24K (ffffffc0011ad000 - ffffffc0011b3000)
1105[ 1.837922] init: init started!
1106[ 1.844512] SELinux: Permission audit_read in class capability2 not defined in policy.
1107[ 1.844529] SELinux: the above unknown classes and permissions will be denied
1108[ 1.861158] audit: type=1403 audit(1405942.539:2): policy loaded auid=4294967295 ses=4294967295
1109[ 1.861387] audit: type=1404 audit(1405942.539:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
1110[ 1.861667] init: (Initializing SELinux enforcing took 0.02s.)
1111[ 1.867947] init: init second stage started!
1112[ 1.910371] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x23 (ok)
1113[ 1.911039] touchkey,s1302: product id is s1302
1114[ 1.911427] touchkey,s1302: F11_2D_QUERY_BASE = 95
1115 F11_2D_CMD_BASE = 6e
1116 F11_2D_CTRL_BASE = 3d
1117 F11_2D_DATA_BASE = 15
1118
1119[ 1.912877] touchkey,s1302: CURRENT_FIRMWARE_ID = 0x4
1120[ 1.913067] touchkey,s1302: before fw update,bootloader_mode = 0x0
1121[ 1.913168] input: synaptics as /devices/soc/75b6000.i2c/i2c-8/8-0020/input/input6
1122[ 1.954962] init: waitpid failed: No child processes
1123[ 1.955082] init: (Loading properties from /default.prop took 0.00s.)
1124[ 1.956007] init: (Parsing /init.environ.rc took 0.00s.)
1125[ 1.956112] init: (Parsing /init.usb.rc took 0.00s.)
1126[ 1.956620] init: /init.qcom.rc: 854: user option requires a user id
1127[ 1.957039] init: (Parsing init.qcom.power.rc took 0.00s.)
1128[ 1.957891] init: (Parsing init.qcom.usb.rc took 0.00s.)
1129[ 1.957925] init: (Parsing /init.qcom.rc took 0.00s.)
1130[ 1.958105] init: (Parsing /init.usb.configfs.rc took 0.00s.)
1131[ 1.958161] init: (Parsing /init.zygote64_32.rc took 0.00s.)
1132[ 1.958205] init: (Parsing /init.trace.rc took 0.00s.)
1133[ 1.958244] init: (Parsing init.supersu.rc took 0.00s.)
1134[ 1.958404] init: could not import file '/init.superuser.rc' from '/init.cm.rc'
1135[ 1.958416] init: (Parsing /init.cm.rc took 0.00s.)
1136[ 1.958425] init: (Parsing /init.rc took 0.00s.)
1137[ 1.958645] init: Starting service 'ueventd'...
1138[ 1.959420] init: Waiting for /dev/.coldboot_done...
1139[ 1.960185] ueventd: ueventd started!
1140[ 1.970063] touchkey,s1302: synaptic:ts->irq is 421
1141[ 1.970400] touchkey,s1302: synaptics_soft_reset !!!
1142[ 1.970427] touchkey,s1302: create nodes is successe!
1143[ 1.970517] touchkey,s1302: synaptics_ts_probe s1302: normal end
1144[ 1.970522] touchkey,s1302: boot_time: synaptics_ts_probe return 0
1145[ 2.290775] ueventd: Coldboot took 0.33s.
1146[ 2.292786] init: Waiting for /dev/.coldboot_done took 0.33s.
1147[ 2.292840] init: /dev/hw_random not found
1148[ 2.292920] keychord: using input dev qpnp_pon for fevent
1149[ 2.292929] keychord: using input dev fpc1020 for fevent
1150[ 2.292936] keychord: using input dev gpio-keys for fevent
1151[ 2.296066] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
1152[ 2.296096] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory
1153[ 2.296115] init: write_file: Unable to open '/proc/sys/kernel/sched_tunable_scaling': No such file or directory
1154[ 2.296133] init: write_file: Unable to open '/proc/sys/kernel/sched_latency_ns': No such file or directory
1155[ 2.296151] init: write_file: Unable to open '/proc/sys/kernel/sched_wakeup_granularity_ns': No such file or directory
1156[ 2.296168] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
1157[ 2.296898] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
1158[ 2.298802] Registered swp emulation handler
1159[ 2.299463] init: /dev/hw_random not found
1160[ 2.303744] EXT4-fs (sde20): mounted filesystem with ordered data mode. Opts: barrier=1,discard
1161[ 2.303844] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
1162[ 2.306671] F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x3edcf45)
1163[ 2.306682] F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1164[ 2.306816] F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xe09e3369)
1165[ 2.306822] F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1166[ 2.306828] F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0x3edcf45)
1167[ 2.306832] F2FS-fs (sda15): Can't find valid F2FS filesystem in 1th superblock
1168[ 2.306836] F2FS-fs (sda15): Magic Mismatch, valid(0xf2f52010) - read(0xe09e3369)
1169[ 2.306840] F2FS-fs (sda15): Can't find valid F2FS filesystem in 2th superblock
1170[ 2.306887] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=f2fs)=-1
1171[ 2.308851] EXT4-fs (sda15): VFS: Can't find ext4 filesystem
1172[ 2.308897] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=-1
1173[ 2.309175] fs_mgr: fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/bootdevice/by-name/userdata for mount /data type f2fs )
1174[ 2.311269] F2FS-fs (sda3): Magic Mismatch, valid(0xf2f52010) - read(0x4000)
1175[ 2.311278] F2FS-fs (sda3): Can't find valid F2FS filesystem in 1th superblock
1176[ 2.311435] F2FS-fs (sda3): Magic Mismatch, valid(0xf2f52010) - read(0x0)
1177[ 2.311440] F2FS-fs (sda3): Can't find valid F2FS filesystem in 2th superblock
1178[ 2.311446] F2FS-fs (sda3): Magic Mismatch, valid(0xf2f52010) - read(0x4000)
1179[ 2.311450] F2FS-fs (sda3): Can't find valid F2FS filesystem in 1th superblock
1180[ 2.311454] F2FS-fs (sda3): Magic Mismatch, valid(0xf2f52010) - read(0x0)
1181[ 2.311457] F2FS-fs (sda3): Can't find valid F2FS filesystem in 2th superblock
1182[ 2.311502] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/cache,target=/cache,type=f2fs)=-1
1183[ 2.313345] EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
1184[ 2.321424] EXT4-fs (sda3): recovery complete
1185[ 2.321815] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
1186[ 2.321883] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/cache,/cache,ext4)=0: Success
1187[ 2.322832] fs_mgr: check_fs(): unmount(/cache) succeeded
1188[ 2.323213] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/cache
1189[ 2.354309] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
1190[ 2.354309]
1191[ 2.354337] e2fsck: /dev/block/bootdevice/by-name/cache: clean, 17/16384 files, 2101/65536 blocks
1192[ 2.354337]
1193[ 2.356403] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: barrier=1
1194[ 2.356470] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/cache,target=/cache,type=ext4)=0
1195[ 2.356481] fs_mgr: mount_with_alternatives(): Mounted /dev/block/bootdevice/by-name/cache on /cache with fs_type=ext4 instead of f2fs
1196[ 2.365370] EXT4-fs (sda2): recovery complete
1197[ 2.365763] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1
1198[ 2.365824] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/persist,target=/persist,type=ext4)=0
1199[ 2.367749] EXT4-fs (sde12): mounted filesystem with ordered data mode. Opts: barrier=1
1200[ 2.367810] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/dsp,target=/dsp,type=ext4)=0
1201[ 2.368835] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/modem,target=/firmware,type=vfat)=0
1202[ 2.369833] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/bluetooth,target=/bt_firmware,type=vfat)=0
1203[ 2.371584] init: Starting service 'logd'...
1204[ 2.385122] init: (Loading properties from /system/build.prop took 0.01s.)
1205[ 2.385174] init: (Loading properties from /vendor/build.prop took 0.00s.)
1206[ 2.385194] init: (Loading properties from /factory/factory.prop took 0.00s.)
1207[ 2.386858] init: Starting service 'vold'...
1208[ 2.387390] init: Not bootcharting.
1209[ 2.387681] logd.auditd: start
1210[ 2.394107] init: Starting service 'exec 0 (/system/bin/tzdatacheck)'...
1211[ 2.400078] init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 371) exited with status 0
1212[ 2.408383] init: Warning! Service exec 1 (/sbin/launch_daemonsu.sh) needs a SELinux domain defined; please fix!
1213[ 2.408397] init: Starting service 'exec 1 (/sbin/launch_daemonsu.sh)'...
1214[ 2.456831] init: Service 'exec 1 (/sbin/launch_daemonsu.sh)' (pid 373) exited with status 0
1215[ 2.456881] init: Starting service 'exec 2 (/sbin/launch_daemonsu.sh)'...
1216[ 2.488398] init: Service 'exec 2 (/sbin/launch_daemonsu.sh)' (pid 387) exited with status 0
1217[ 2.489159] init: Starting service 'sysinit'...
1218[ 2.490071] init: Starting service 'logd-reinit'...
1219[ 2.490527] init: write_file: Unable to open '/sys/block/dm-0/queue/read_ahead_kb': No such file or directory
1220[ 2.490736] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
1221[ 2.490751] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
1222[ 2.490766] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
1223[ 2.490775] init: cannot expand '${persist.sys.mba_boot_timeout}' while writing to '/sys/module/pil_msa/parameters/pbl_mba_boot_timeout_ms'
1224[ 2.490787] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
1225[ 2.490811] init: cannot expand '${persist.sys.modem_auth_timeout}' while writing to '/sys/module/pil_msa/parameters/modem_auth_timeout_ms'
1226[ 2.490826] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
1227[ 2.490837] init: cannot expand '${persist.sys.pil_proxy_timeout}' while writing to '/sys/module/peripheral_loader/parameters/proxy_timeout_ms'
1228[ 2.492443] subsys-pil-tz 9300000.qcom,lpass: adsp: loading from 0x000000008ea00000 to 0x0000000090400000
1229[ 2.496158] logd.daemon: reinit
1230[ 2.538891] BQ: bq27541_hw_config: DEVICE_TYPE is 0x541, FIRMWARE_VERSION is 0x200
1231[ 2.538901] BQ: bq27541_hw_config: Complete bq27541 configuration 0x604B
1232[ 2.749310] subsys-pil-tz 9300000.qcom,lpass: adsp: Brought out of reset
1233[ 2.759711] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1234[ 2.760012] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1235[ 2.765653] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [lpass_IPCRTR]
1236[ 2.767028] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1237[ 2.767343] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1238[ 2.770696] subsys-pil-tz 9300000.qcom,lpass: Subsystem error monitoring/handling services are up
1239[ 2.770716] subsys-pil-tz 9300000.qcom,lpass: adsp: Power/Clock ready interrupt received
1240[ 2.770745] sysmon_send_event_no_qmi: Message sending failed -19
1241[ 2.770762] L-Notify: Generel: 7
1242[ 2.770953] init: Service 'sysinit' (pid 397) exited with status 0
1243[ 2.771109] init: Service 'logd-reinit' (pid 398) exited with status 0
1244[ 2.771249] sysmon_send_event_no_qmi: Message sending failed -19
1245[ 2.773258] subsys-pil-tz 1c00000.qcom,ssc: slpi: loading from 0x0000000090400000 to 0x0000000090e00000
1246[ 2.780950] apr_tal:Q6 Is Up
1247[ 2.783246] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1248[ 2.783629] msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered
1249[ 2.873042] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
1250[ 2.873416] diag: In diag_send_feature_mask_update, control channel is not open, p: 1, ffffffc0014259e0
1251[ 2.879820] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000009184000
1252[ 2.879827] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000009184000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000009184000
1253[ 2.879837] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000009184000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000009184000
1254[ 2.879907] sps:BAM 0x0000000009184000 (va:0xffffff8004000000) enabled: ver:0x19, number of pipes:31
1255[ 2.879913] sps:BAM 0x0000000009184000 is registered.
1256[ 2.880952] wcd9335-slim tasha-slim-pgd: Platform data from device tree
1257[ 2.881031] wcd9335-slim tasha-slim-pgd: cdc-vdd-buck: vol=[1800000 1800000]uV, curr=[650000]uA, ond 0
1258[ 2.881045] wcd9335-slim tasha-slim-pgd: cdc-buck-sido: vol=[1800000 1800000]uV, curr=[250000]uA, ond 0
1259[ 2.881059] wcd9335-slim tasha-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
1260[ 2.881073] wcd9335-slim tasha-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
1261[ 2.881087] wcd9335-slim tasha-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
1262[ 2.881094] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-ldoh-v property in node /soc/slim@91c0000/tasha_codec failed
1263[ 2.881100] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt1-mv property in node /soc/slim@91c0000/tasha_codec failed
1264[ 2.881107] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt2-mv property in node /soc/slim@91c0000/tasha_codec failed
1265[ 2.881115] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt3-mv property in node /soc/slim@91c0000/tasha_codec failed
1266[ 2.881123] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias1-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
1267[ 2.881129] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias2-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
1268[ 2.881135] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias3-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
1269[ 2.881140] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias4-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
1270[ 2.881165] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-dmic-clk-drv-strength property in node /soc/slim@91c0000/tasha_codec failed, err = -22
1271[ 2.881176] wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_probe: codec type is 2
1272[ 2.882024] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1273[ 2.882399] msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered
1274[ 2.896329] subsys-pil-tz 1c00000.qcom,ssc: slpi: Brought out of reset
1275[ 2.938058] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1276[ 2.938434] msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered
1277[ 2.940202] slimbus:1 laddr:0xcb, EAPC:0x1:0xa0
1278[ 2.940230] wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_device_up: slim device up, dev_up = 1
1279[ 2.940439] slimbus:1 laddr:0xca, EAPC:0x0:0xa0
1280[ 2.940640] wcd9335-slim tasha-slim-pgd: wcd9335_bring_up: wcd9335 codec version is v2.0
1281[ 2.941153] wcd9335-slim tasha-slim-pgd: wcd9xxx_check_codec_type: detected tasha_codec, major 0x107, minor 0x1, ver 0x2
1282[ 2.941164] wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4
1283[ 2.945259] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [dsps_IPCRTR]
1284[ 2.946199] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1285[ 2.947216] tasha_codec tasha_codec: tasha_codec_probe()
1286[ 2.949103] subsys-pil-tz 1c00000.qcom,ssc: slpi: Power/Clock ready interrupt received
1287[ 2.949116] subsys-pil-tz 1c00000.qcom,ssc: Subsystem error monitoring/handling services are up
1288[ 2.949498] sysmon_send_event_no_qmi: Message sending failed -19
1289[ 2.949515] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: SLPI image is loaded
1290[ 2.949792] diag: In diag_send_feature_mask_update, control channel is not open, p: 3, ffffffc001425ad0
1291[ 2.949920] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and slpi's SSCTL service
1292[ 2.951062] init: Starting service 'healthd'...
1293[ 2.951121] tasha_codec tasha_codec: tasha_probe: Tasha driver probe done
1294[ 2.951513] init: Starting service 'lmkd'...
1295[ 2.951886] init: Starting service 'servicemanager'...
1296[ 2.952275] init: Starting service 'surfaceflinger'...
1297[ 2.952744] init: Starting service 'qseecomd'...
1298[ 2.953002] init: Starting service 'dashd'...
1299[ 2.953412] init: Starting service 'irsc_util'...
1300[ 2.953834] init: Starting service 'rmt_storage'...
1301[ 2.954088] init: cannot find '/system/bin/rfs_access', disabling 'rfs_access'
1302[ 2.954276] init: Starting service 'config_bt_addr'...
1303[ 2.954415] dashd: dashd_main enterd
1304[ 2.954434] dashd: run /sbin/dashd ENGINE START!
1305[ 2.958229] tasha_codec tasha_codec: tasha_handle_pdata: dmic_clk_strength invalid, default = 2
1306[ 2.961047] init: Warning! Service config_bluetooth needs a SELinux domain defined; please fix!
1307[ 2.961065] init: Starting service 'config_bluetooth'...
1308[ 2.963529] init: Starting service 'sensors'...
1309[ 2.964097] init: Warning! Service cs-early-boot needs a SELinux domain defined; please fix!
1310[ 2.964109] init: Starting service 'cs-early-boot'...
1311[ 2.964165] dashd: dash_4p4v_firmware_data detected
1312[ 2.964187] FASTCHG: dash_dev_write: fw_ver_count = 5644
1313[ 2.964507] init: Warning! Service qcom-usb-sh needs a SELinux domain defined; please fix!
1314[ 2.964517] init: Starting service 'qcom-usb-sh'...
1315[ 2.964920] init: Service 'irsc_util' (pid 423) exited with status 0
1316[ 2.965198] init: write_file: Unable to open '/sys/devices/soc/75ba000.i2c/i2c-12/12-0020/input/input0/update_fw': No such file or directory
1317[ 2.973848] init: Service 'cs-early-boot' (pid 428) exited with status 127
1318[ 2.977597] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
1319[ 2.977623] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
1320[ 2.977642] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
1321[ 2.977661] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
1322[ 2.977679] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
1323[ 2.977698] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
1324[ 2.977716] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
1325[ 2.977734] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
1326[ 2.977751] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
1327[ 2.977769] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
1328[ 2.977787] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
1329[ 2.977805] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
1330[ 2.977888] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
1331[ 2.977927] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
1332[ 2.977971] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
1333[ 2.978018] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
1334[ 2.978058] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
1335[ 2.978097] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
1336[ 2.978136] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
1337[ 2.978170] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
1338[ 2.982864] init: write_file: Unable to open '/sys/block/mmcblk0/queue/scheduler': No such file or directory
1339[ 2.982890] init: write_file: Unable to open '/sys/block/mmcblk1/queue/scheduler': No such file or directory
1340[ 2.993540] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL5 --> MultiMedia5 --> TERT_MI2S_RX Audio Mixer
1341[ 2.993553] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL5 -> MultiMedia5 -> TERT_MI2S_RX Audio Mixer
1342[ 2.993576] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL8 --> MultiMedia8 --> TERT_MI2S_RX Audio Mixer
1343[ 2.993581] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL8 -> MultiMedia8 -> TERT_MI2S_RX Audio Mixer
1344[ 2.996857] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for INT_FM_TX --> INTERNAL_FM_TX --> SEC_MI2S_RX Port Mixer
1345[ 2.996870] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route INT_FM_TX -> INTERNAL_FM_TX -> SEC_MI2S_RX Port Mixer
1346[ 3.000212] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer
1347[ 3.000223] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer
1348[ 3.000252] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer
1349[ 3.000264] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer
1350[ 3.004564] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SEC_MI2S_TX --> SEC_MI2S_TX --> SLIMBUS_0_RX Port Mixer
1351[ 3.004575] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> SLIMBUS_0_RX Port Mixer
1352[ 3.005082] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
1353[ 3.005092] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
1354[ 3.005961] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX
1355[ 3.005970] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX
1356[ 3.040832] random: init urandom read with 69 bits of entropy available
1357[ 3.043697] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to create SEC_MI2S_RX Port Mixer debugfs file
1358[ 3.057007] of_batterydata_get_best_profile: No battery data found
1359[ 3.057018] FG: fg_batt_profile_init: couldn't find profile handle
1360[ 3.057028] FG: batt_profile_init: failed to initialize profile
1361[ 3.059127] BQ: bq27541_battery_soc: bq27541_battery_soc = 95
1362[ 3.065250] dashd: CREATE THREAD!
1363[ 3.065959] dashd: THREAD running
1364[ 3.066008] dashd: dash read
1365[ 3.071699] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths
1366[ 3.086962] dashd: type=Unknown, soc=95, temp=33, vbat=4197, ibat=732
1367[ 3.090496] init: Service 'config_bt_addr' (pid 425) exited with status 0
1368[ 3.090727] init: write_file: Unable to open '/sys/block/dm-0/queue/scheduler': No such file or directory
1369[ 3.091320] init: Starting service 'defaultcrypto'...
1370[ 3.092399] init: Starting service 'ppd'...
1371[ 3.092940] enable_store: android_usb: already disabled
1372[ 3.113186] kgsl: _read_fw2_block_header: GPMU unknown header ID 6
1373[ 3.169519] i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0x24 (ok)
1374[ 3.174804] init: Service 'config_bluetooth' (pid 426) exited with status 0
1375[ 3.179897] msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: no source widget found for SLIMBUS_2_RX
1376[ 3.179911] msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: Failed to add route SLIMBUS_2_RX -> direct -> Slimbus2 Playback
1377[ 3.179975] msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: no sink widget found for SLIMBUS_2_TX
1378[ 3.179980] msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: Failed to add route Slimbus2 Capture -> direct -> SLIMBUS_2_TX
1379[ 3.181335] devfreq soc:qcom,kgsl-busmon: Couldn't update frequency transition information.
1380[ 3.188004] init: Service 'qcom-usb-sh' (pid 429) exited with status 0
1381[ 3.216484] init: Starting service 'bootanim'...
1382[ 5.657166] random: nonblocking pool is initialized
1383[ 5.741346] QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -65,app_id = 0,lstr = 12288
1384[ 5.817805] QSEECOM: qseecom_create_key: Set the key successfully
1385[ 5.821240] device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
1386[ 5.821251] device-mapper: table: 254:0: adding target device sda15 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0
1387[ 8.220402] mdss_dsi_ack_err_status: status=1008000
1388[ 8.220415] mdss_dsi_timeout_status: status=1
1389[ 8.220649] mdss_dsi_ack_err_status: status=1008000
1390[ 8.220875] mdss_dsi_ack_err_status: status=1008000
1391[ 8.221100] mdss_dsi_ack_err_status: status=1008000
1392[ 13.230624] mdss_dsi_ack_err_status: status=1008000
1393[ 13.231412] mdss_dsi_ack_err_status: status=1008000
1394[ 13.231657] mdss_dsi_ack_err_status: status=1008000
1395[ 18.253015] mdss_dsi_ack_err_status: status=1008000
1396[ 23.279484] mdss_dsi_ack_err_status: status=1008000
1397[ 28.289642] mdss_dsi_ack_err_status: status=1008000
1398[ 32.068551] F2FS-fs (dm-0): Unrecognized mount option "data_flush" or missing value
1399[ 32.227886] F2FS-fs (dm-0): recover_inode: ino = 674e, name = PlayerService.xml
1400[ 32.227909] F2FS-fs (dm-0): recover_data: ino = 674e, recovered = 0 blocks, err = 0
1401[ 32.227935] F2FS-fs (dm-0): recover_data: ino = 5dbd, recovered = 1 blocks, err = 0
1402[ 32.227941] F2FS-fs (dm-0): recover_inode: ino = 1f19b, name = preferences_storage
1403[ 32.227971] F2FS-fs (dm-0): recover_data: ino = 1f19b, recovered = 20 blocks, err = 0
1404[ 32.227992] F2FS-fs (dm-0): recover_data: ino = 5dbd, recovered = 1 blocks, err = 0
1405[ 32.228006] F2FS-fs (dm-0): recover_data: ino = 5dbd, recovered = 1 blocks, err = 0
1406[ 32.228018] F2FS-fs (dm-0): recover_data: ino = 5dbd, recovered = 1 blocks, err = 0
1407[ 32.228031] F2FS-fs (dm-0): recover_data: ino = 5dbd, recovered = 1 blocks, err = 0
1408[ 32.228043] F2FS-fs (dm-0): recover_data: ino = 5dbd, recovered = 1 blocks, err = 0
1409[ 32.228055] F2FS-fs (dm-0): recover_data: ino = 5dbd, recovered = 1 blocks, err = 0
1410[ 32.228067] F2FS-fs (dm-0): recover_data: ino = 5dbd, recovered = 1 blocks, err = 0
1411[ 32.228080] F2FS-fs (dm-0): recover_data: ino = 5dbd, recovered = 1 blocks, err = 0
1412[ 32.228085] F2FS-fs (dm-0): recover_inode: ino = 5dbd, name = 87bf4958-8c9e-40a2-9b7f-ab77222b1137.db-wal
1413[ 32.228096] F2FS-fs (dm-0): recover_data: ino = 5dbd, recovered = 1 blocks, err = 0
1414[ 32.228106] F2FS-fs (dm-0): recover_inode: ino = 5de8, name = preferences_storage-wal
1415[ 32.228117] F2FS-fs (dm-0): recover_data: ino = 5de8, recovered = 0 blocks, err = 0
1416[ 32.272893] init: property_set("ro.product.model", "OnePlus 3T") failed
1417[ 32.272943] init: property_set("ro.alarm_boot", "false") failed
1418[ 32.273336] init: Starting service 'logd-reinit'...
1419[ 32.273815] enable_store: android_usb: already disabled
1420[ 32.273977] init: Starting service 'adbd'...
1421[ 32.285562] init: Not bootcharting.
1422[ 32.287799] init: Service 'logd-reinit' (pid 623) exited with status 0
1423[ 33.316405] mdss_dsi_ack_err_status: status=1008000
1424[ 37.828060] init: Starting service 'exec 3 (/system/bin/tzdatacheck)'...
1425[ 37.833550] init: Service 'exec 3 (/system/bin/tzdatacheck)' (pid 632) exited with status 0
1426[ 37.839992] init: Warning! Service exec 4 (/sbin/launch_daemonsu.sh) needs a SELinux domain defined; please fix!
1427[ 37.840007] init: Starting service 'exec 4 (/sbin/launch_daemonsu.sh)'...
1428[ 38.326742] mdss_dsi_ack_err_status: status=1008000
1429[ 38.543781] init: Untracked pid 689 exited with status 0
1430[ 38.768193] init: Service 'exec 4 (/sbin/launch_daemonsu.sh)' (pid 633) exited with status 0
1431[ 38.768257] init: Starting service 'exec 5 (/sbin/launch_daemonsu.sh)'...
1432[ 38.849185] init: Service 'exec 5 (/sbin/launch_daemonsu.sh)' (pid 695) exited with status 0
1433[ 38.849922] init: Starting service 'sysinit'...
1434[ 38.850860] init: Starting service 'netd'...
1435[ 38.851601] init: Starting service 'debuggerd'...
1436[ 38.852292] init: Starting service 'debuggerd64'...
1437[ 38.853003] init: Starting service 'ril-daemon'...
1438[ 38.853637] init: Starting service 'drm'...
1439[ 38.854237] init: Starting service 'media'...
1440[ 38.854804] init: Starting service 'installd'...
1441[ 38.855362] init: Starting service 'keystore'...
1442[ 38.855987] init: Starting service 'adsprpcd'...
1443[ 38.856552] init: Starting service 'imsqmidaemon'...
1444[ 38.857121] init: Starting service 'energy-awareness'...
1445[ 38.857511] init: cannot find '/system/bin/qcom-system-daemon', disabling 'qcomsysd'
1446[ 38.857537] init: cannot find '/system/bin/cnd', disabling 'cnd'
1447[ 38.857784] init: Starting service 'tftp_server'...
1448[ 38.858173] init: cannot find '/system/bin/port-bridge', disabling 'port-bridge'
1449[ 38.858412] init: Starting service 'qmuxd'...
1450[ 38.858969] init: Starting service 'netmgrd'...
1451[ 38.859525] init: Starting service 'ipacm-diag'...
1452[ 38.863762] init: Starting service 'ipacm'...
1453[ 38.864354] init: Starting service 'qti'...
1454[ 38.864759] init: cannot find '/system/bin/ptt_socket_app', disabling 'ptt_socket_app'
1455[ 38.864929] init: Starting service 'ril-daemon2'...
1456[ 38.865303] init: cannot find '/system/bin/usb_uicc_client', disabling 'usb_uicc_daemon'
1457[ 38.865339] init: cannot find '/system/bin/wfdservice', disabling 'wfdservice'
1458[ 38.865598] init: Starting service 'zygote'...
1459[ 38.866188] init: Starting service 'zygote_secondary'...
1460[ 38.866816] init: Starting service 'gatekeeperd'...
1461[ 38.867210] init: cannot find '/system/xbin/perfprofd', disabling 'perfprofd'
1462[ 38.867459] init: Starting service 'qcamerasvr'...
1463[ 38.868076] init: Starting service 'fingerprintd'...
1464[ 38.868659] init: Starting service 'qfp-daemon'...
1465[ 38.869047] init: cannot find '/system/bin/qvop-daemon', disabling 'qvop-daemon'
1466[ 38.869263] init: Starting service 'per_mgr'...
1467[ 38.869651] init: cannot find '/system/bin/seempd', disabling 'seempd'
1468[ 38.869678] init: cannot find '/system/bin/secotad', disabling 'secotad'
1469[ 38.869910] init: Starting service 'time_daemon'...
1470[ 38.871371] init: Starting service 'audiod'...
1471[ 38.871848] init: cannot find '/system/bin/dts_configurator', disabling 'dts_configurator'
1472[ 38.871877] init: cannot find '/system/bin/tloc_daemon', disabling 'tlocd'
1473[ 38.871903] init: cannot find '/system/vendor/bin/mdtpd', disabling 'mdtpd'
1474[ 38.871932] init: cannot find '/system/bin/dpmd', disabling 'dpmd'
1475[ 38.872244] init: Starting service 'cnss-daemon'...
1476[ 38.873006] init: Starting service 'loc_launcher'...
1477[ 38.873489] init: cannot find '/system/bin/ATFWD-daemon', disabling 'atfwd'
1478[ 38.873821] init: Starting service 'qseeproxydaemon'...
1479[ 38.903767] init: cannot find '/system/vendor/bin/seemp_healthd', disabling 'seemp_healthd'
1480[ 38.904072] init: Starting service 'ifaadaemon'...
1481[ 38.904649] init: Starting service 'daemonsu'...
1482[ 38.908140] init: Service 'defaultcrypto' (pid 470) exited with status 0
1483[ 38.920653] init: Starting service 'config_bt_addr'...
1484[ 38.921687] init: Warning! Service config_bluetooth needs a SELinux domain defined; please fix!
1485[ 38.921705] init: Starting service 'config_bluetooth'...
1486[ 38.922628] init: Starting service 'per_proxy'...
1487[ 38.923251] init: Starting service 'imsdatadaemon'...
1488[ 39.039800] init: Service 'config_bt_addr' (pid 752) exited with status 0
1489[ 39.140115] ipa ipa_uc_state_check:296 uC is not loaded
1490[ 39.140141] ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1491[ 39.160142] init: Service 'sysinit' (pid 712) exited with status 0
1492[ 39.200856] init: Service 'energy-awareness' (pid 724) exited with status 0
1493[ 39.201728] pil-q6v5-mss 2080000.qcom,mss: Debug policy not present - msadp. Continue.
1494[ 39.297703] init: property_set("ro.qualcomm.bluetooth.opp", "true") failed
1495[ 39.344598] init: property_set("ro.qualcomm.bluetooth.hfp", "true") failed
1496[ 39.376679] init: Service 'daemonsu' (pid 750) exited with status 0
1497[ 39.428794] init: property_set("ro.qualcomm.bluetooth.hsp", "true") failed
1498[ 39.465008] init: property_set("ro.qualcomm.bluetooth.pbap", "true") failed
1499[ 39.497731] init: property_set("ro.qualcomm.bluetooth.ftp", "true") failed
1500[ 39.540218] init: property_set("ro.qualcomm.bluetooth.nap", "true") failed
1501[ 39.578181] init: property_set("ro.bluetooth.sap", "true") failed
1502[ 39.604390] init: property_set("ro.bluetooth.dun", "true") failed
1503[ 39.615145] init: property_set("ro.qualcomm.bluetooth.map", "true") failed
1504[ 39.640710] init: property_set("ro.bluetooth.hfp.ver", "1.6") failed
1505[ 39.670844] init: Service 'config_bluetooth' (pid 753) exited with status 0
1506[ 39.772223] imx298 probe succeeded
1507[ 39.809340] s5k3p8sp probe succeeded
1508[ 39.836721] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
1509[ 39.839222] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
1510[ 40.009687] MSM-CPP cpp_init_hardware:861 stream_cnt:0
1511[ 40.160389] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
1512[ 40.165212] MSM-CPP cpp_init_hardware:861 stream_cnt:0
1513[ 40.343822] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [mpss_IPCRTR]
1514[ 40.343935] M-Notify: General: 7
1515[ 40.372649] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
1516[ 40.387606] MSM-CPP cpp_init_hardware:861 stream_cnt:0
1517[ 40.617535] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, ffffffc001425968
1518[ 40.766486] ipa-wan handle_indication_req:131 not send indication
1519[ 40.767972] ipa ipa_uc_response_hdlr:456 IPA uC loaded
1520[ 40.768000] ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1521[ 40.770283] ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1522[ 40.771166] ipa ipa_uc_wdi_event_log_info_handler:338 WDI stats ofst=0x45130
1523[ 40.771180] ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1524[ 41.457061] init: sys_prop: permission denied uid:1001 name:oem.device.imeicache
1525[ 41.940580] init: property_set("ro.ril.svlte1x", "false") failed
1526[ 41.940680] init: property_set("ro.ril.svdo", "false") failed
1527[ 41.958132] init: sys_prop: permission denied uid:1001 name:oem.device.imeicache
1528[ 41.960534] init: property_set("ro.ril.supportLTE", "1") failed
1529[ 43.353951] mdss_dsi_ack_err_status: status=1008000
1530[ 44.850911] ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1531[ 44.851714] ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1532[ 44.852712] ipa-wan ipa_wwan_ioctl:1509 get AGG size 8192 count 10
1533[ 44.853118] ipa ipa_sps_irq_control_all:932 EP (5) not allocated.
1534[ 44.853947] ipa ipa_assign_policy:2943 get close-by 8192
1535[ 44.853955] ipa ipa_assign_policy:2949 set rx_buff_sz 7680
1536[ 44.853959] ipa ipa_assign_policy:2971 set aggr_limit 6
1537[ 44.860582] ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data0) register to IPA
1538[ 44.870827] ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data1) register to IPA
1539[ 44.881916] ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data2) register to IPA
1540[ 44.911071] ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data3) register to IPA
1541[ 44.921714] ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data4) register to IPA
1542[ 44.939223] ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data5) register to IPA
1543[ 44.951826] ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data6) register to IPA
1544[ 44.978310] ipa-wan ipa_wwan_ioctl:1418 dev(rmnet_data7) register to IPA
1545[ 45.865515] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
1546[ 45.874223] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1547[ 45.874429] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1548[ 45.874635] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1549[ 45.874643] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
1550[ 45.874838] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1551[ 45.874844] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
1552[ 45.875050] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1553[ 45.875249] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1554[ 45.875452] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1555[ 45.875460] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
1556[ 45.875656] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1557[ 45.875663] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
1558[ 45.878241] msm_pcm_volume_ctl_get substream runtime not found
1559[ 45.878920] msm_pcm_volume_ctl_get substream runtime not found
1560[ 45.879497] msm_pcm_volume_ctl_get substream runtime not found
1561[ 45.879878] msm_compr_audio_effects_config_get: stream or effects inactive
1562[ 45.881662] msm_pcm_volume_ctl_get substream runtime not found
1563[ 45.882204] msm_compr_audio_effects_config_get: stream or effects inactive
1564[ 45.883720] msm_compr_audio_effects_config_get: stream or effects inactive
1565[ 45.885778] msm_pcm_volume_ctl_get substream runtime not found
1566[ 45.886290] msm_compr_audio_effects_config_get: stream or effects inactive
1567[ 45.887757] msm_compr_audio_effects_config_get: stream or effects inactive
1568[ 45.889022] msm_compr_audio_effects_config_get: stream or effects inactive
1569[ 45.890345] msm_compr_audio_effects_config_get: stream or effects inactive
1570[ 45.891655] msm_compr_audio_effects_config_get: stream or effects inactive
1571[ 45.893078] msm_compr_audio_effects_config_get: stream or effects inactive
1572[ 45.991003] call_set_cals: set_cal failed!
1573[ 46.462213] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
1574[ 46.464780] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1575[ 46.464858] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1576[ 46.464922] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1577[ 46.464927] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
1578[ 46.464989] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1579[ 46.464994] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
1580[ 46.465067] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
1581[ 46.465141] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
1582[ 46.465213] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1583[ 46.465219] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
1584[ 46.465283] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
1585[ 46.465287] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
1586[ 46.465983] msm_pcm_volume_ctl_get substream runtime not found
1587[ 46.466157] msm_pcm_volume_ctl_get substream runtime not found
1588[ 46.466349] msm_pcm_volume_ctl_get substream runtime not found
1589[ 46.466476] msm_compr_audio_effects_config_get: stream or effects inactive
1590[ 46.466934] msm_pcm_volume_ctl_get substream runtime not found
1591[ 46.467069] msm_compr_audio_effects_config_get: stream or effects inactive
1592[ 46.467477] msm_compr_audio_effects_config_get: stream or effects inactive
1593[ 46.468083] msm_pcm_volume_ctl_get substream runtime not found
1594[ 46.468224] msm_compr_audio_effects_config_get: stream or effects inactive
1595[ 46.468625] msm_compr_audio_effects_config_get: stream or effects inactive
1596[ 46.469044] msm_compr_audio_effects_config_get: stream or effects inactive
1597[ 46.469474] msm_compr_audio_effects_config_get: stream or effects inactive
1598[ 46.469894] msm_compr_audio_effects_config_get: stream or effects inactive
1599[ 46.471058] msm_compr_audio_effects_config_get: stream or effects inactive
1600[ 46.480955] tasha_codec tasha_codec: tasha_mad_input_put: mic bias source not found for input = DMIC1
1601[ 48.364561] mdss_dsi_ack_err_status: status=1008000
1602[ 53.391987] mdss_dsi_ack_err_status: status=1008000
1603[ 58.419738] mdss_dsi_ack_err_status: status=1008000
1604[ 63.430855] mdss_dsi_ack_err_status: status=1008000
1605[ 65.335445] PWM device already freed
1606[ 65.335544] PWM device already freed
1607[ 65.335628] PWM device already freed
1608[ 65.482889] QSEECOM: qseecom_load_app: App (fpctzapp) does'nt exist, loading apps for first time
1609[ 66.002997] QSEECOM: qseecom_load_app: App with id 5 (fpctzapp) now loaded
1610[ 66.539826] ol_transfer_codeswap_struct: failed to get codeswap structure
1611[ 66.561976] __ol_transfer_bin_file: Failed to get bdwlan30.b00
1612[ 67.249207] init: Starting service 'p2p_supplicant'...
1613[ 67.306783] init: Service 'bootanim' (pid 503) exited with status 0
1614[ 67.625382] BQ: bq27541_battery_soc: bq27541_battery_soc = 94
1615[ 68.442822] mdss_dsi_ack_err_status: status=1008000
1616[ 70.348798] init: Starting service 'cs-post-boot'...
1617[ 70.358307] init: Service 'cs-post-boot' (pid 2480) exited with status 127
1618[ 70.386117] init: cannot find '/system/bin/iop', disabling 'iop'
1619[ 70.387401] init: write_file: Unable to open '/sys/block/mmcblk0/queue/scheduler': No such file or directory
1620[ 70.387444] init: write_file: Unable to open '/sys/block/mmcblk1/queue/scheduler': No such file or directory
1621[ 70.482832] init: write_file: Unable to open '/sys/block/mmcblk0/queue/iosched/slice_idle': No such file or directory
1622[ 70.482868] init: write_file: Unable to open '/sys/block/mmcblk1/queue/iosched/slice_idle': No such file or directory
1623[ 70.600326] touchkey,s1302: synaptics_s1302_key_reverse_write key_reverse:1
1624[ 71.629763] i2c-msm-v2 75b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:10) mode:FIFO slv_addr:0x28 MSTR_STS:0x0d1300c8 OPER:0x00000090
1625[ 71.630655] pn544_dev_write : i2c_master_send returned -107
1626[ 72.154438] init: Starting service 'start_hci_filter'...
1627[ 73.453346] mdss_dsi_ack_err_status: status=1008000
1628[ 75.000301] init: cannot find '/system/bin/dun-server', disabling 'bt-dun'
1629[ 76.436622] HTB: quantum of class 10001 is big. Consider r2q change.
1630[ 76.445444] HTB: quantum of class 10010 is big. Consider r2q change.
1631[ 77.865171] msm8996_quat_mi2s_snd_startup
1632[ 77.871163] afe_send_custom_topology_block: AFE SVC cal has invalid size: 0!
1633[ 77.871177] afe_send_custom_topology: No cal sent for cal_index 7! ret -22
1634[ 77.881220] state: 0
1635[ 77.883630] NOHZ: local_softirq_pending 08
1636[ 77.944259] NOHZ: local_softirq_pending 08
1637[ 77.944460] NOHZ: local_softirq_pending 08
1638[ 77.944516] NOHZ: local_softirq_pending 08
1639[ 78.136671] tfa98xx_dsp_get_param(): DSP RPC error 103
1640[ 78.183334] tfa98xx_dsp_get_param(): DSP RPC error 103
1641[ 78.303255] trigger:1(0:stop 1:start)
1642[ 78.466057] mdss_dsi_ack_err_status: status=1008000
1643[ 78.546516] HTB: quantum of class 10010 is big. Consider r2q change.
1644[ 78.638120] NOHZ: local_softirq_pending 08
1645[ 78.659145] NOHZ: local_softirq_pending 08
1646[ 78.659187] NOHZ: local_softirq_pending 08
1647[ 78.690998] ipa ipa_inc_acquire_wakelock:3380 client enum 1 mask already set. ref cnt = 6
1648[ 78.872102] NOHZ: local_softirq_pending 08
1649[ 78.872607] NOHZ: local_softirq_pending 08
1650[ 79.420793] i2c-msm-v2 75b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x28 MSTR_STS:0x0d1300c8 OPER:0x00000090
1651[ 79.420849] pn544_dev_write : i2c_master_send returned -107
1652[ 82.025798] audit: audit_lost=1 audit_rate_limit=20 audit_backlog_limit=64
1653[ 82.025811] audit: rate limit exceeded
1654[ 82.553409] trigger:0(0:stop 1:start)
1655[ 82.553446] state: 1
1656[ 82.581550] msm8996_quat_mi2s_snd_shutdown start
1657[ 82.581565] tfa stop
1658[ 82.589113] msm8996_quat_mi2s_snd_shutdown end
1659[ 83.149570] msm8996_quat_mi2s_snd_startup
1660[ 83.162899] state: 0
1661[ 83.215014] trigger:1(0:stop 1:start)
1662[ 83.473524] mdss_dsi_ack_err_status: status=1008000
1663[ 88.484010] mdss_dsi_ack_err_status: status=1008000
1664[ 90.140348] trigger:0(0:stop 1:start)
1665[ 90.140385] state: 1
1666[ 90.166457] msm8996_quat_mi2s_snd_shutdown start
1667[ 90.166475] tfa stop
1668[ 90.173830] msm8996_quat_mi2s_snd_shutdown end
1669[ 93.493648] mdss_dsi_ack_err_status: status=1008000
1670[ 98.397196] binder: transaction release 122113 bad handle 40
1671[ 98.506213] mdss_dsi_ack_err_status: status=1008000
1672[ 99.306055] msm8996_quat_mi2s_snd_startup
1673[ 99.319885] state: 0
1674[ 99.363300] trigger:1(0:stop 1:start)
1675[ 100.106092] audit: audit_lost=1223 audit_rate_limit=20 audit_backlog_limit=64
1676[ 100.106104] audit: rate limit exceeded
1677[ 100.830695] synaptics,s3320: enter gesture mode
1678[ 101.007206] trigger:0(0:stop 1:start)
1679[ 101.007223] state: 1
1680[ 101.012162] msm8996_quat_mi2s_snd_shutdown start
1681[ 101.012176] tfa stop
1682[ 101.017836] msm8996_quat_mi2s_snd_shutdown end
1683[ 110.022004] init: Untracked pid 4712 exited with status 56
1684[ 110.217928] init: Untracked pid 4662 exited with status 125
1685[ 112.224479] init: Untracked pid 4941 exited with status 85
1686[ 117.051169] init: Untracked pid 4664 exited with status 0
1687[ 117.102492] init: Untracked pid 4715 exited with status 0
1688[ 117.146905] init: Untracked pid 4943 exited with status 0
1689[ 149.600712] init: Untracked pid 4917 killed by signal 9
1690[ 192.281937] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
1691[ 192.282091] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
1692[ 192.282235] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
1693[ 195.325117] msm8996_quat_mi2s_snd_startup
1694[ 195.339187] state: 0
1695[ 195.384978] trigger:1(0:stop 1:start)
1696[ 196.410200] mdss_dsi_ack_err_status: status=1008000
1697[ 198.524503] trigger:0(0:stop 1:start)
1698[ 198.524544] state: 1
1699[ 198.550913] msm8996_quat_mi2s_snd_shutdown start
1700[ 198.550928] tfa stop
1701[ 198.560548] msm8996_quat_mi2s_snd_shutdown end
1702[ 201.424822] mdss_dsi_ack_err_status: status=1008000
1703[ 206.441142] mdss_dsi_ack_err_status: status=1008000
1704[ 207.310743] msm8996_quat_mi2s_snd_startup
1705[ 207.324960] state: 0
1706[ 207.374288] trigger:1(0:stop 1:start)
1707[ 210.504774] trigger:0(0:stop 1:start)
1708[ 210.504834] state: 1
1709[ 210.536274] msm8996_quat_mi2s_snd_shutdown start
1710[ 210.536310] tfa stop
1711[ 210.545330] msm8996_quat_mi2s_snd_shutdown end
1712[ 211.455017] mdss_dsi_ack_err_status: status=1008000
1713[ 216.461954] mdss_dsi_ack_err_status: status=1008000
1714[ 221.488411] mdss_dsi_ack_err_status: status=1008000
1715[ 226.492037] mdss_dsi_ack_err_status: status=1008000
1716[ 231.504309] mdss_dsi_ack_err_status: status=1008000
1717[ 235.934830] msm8996_quat_mi2s_snd_startup
1718[ 235.949967] state: 0
1719[ 235.996964] trigger:1(0:stop 1:start)
1720[ 236.513771] mdss_dsi_ack_err_status: status=1008000
1721[ 241.524526] mdss_dsi_ack_err_status: status=1008000
1722[ 241.971448] trigger:0(0:stop 1:start)
1723[ 241.971589] state: 1
1724[ 242.000365] msm8996_quat_mi2s_snd_shutdown start
1725[ 242.000405] tfa stop
1726[ 242.009591] msm8996_quat_mi2s_snd_shutdown end
1727[ 246.534979] mdss_dsi_ack_err_status: status=1008000
1728[ 251.545632] mdss_dsi_ack_err_status: status=1008000
1729[ 255.633414] touchkey,s1302: touch_key[0x0],touchkey_state[0x2]
1730[ 256.550185] mdss_dsi_ack_err_status: status=1008000
1731[ 256.581677] msm8996_quat_mi2s_snd_startup
1732[ 256.595150] state: 0
1733[ 256.643812] trigger:1(0:stop 1:start)
1734[ 260.329836] trigger:0(0:stop 1:start)
1735[ 260.330207] state: 1
1736[ 260.356302] msm8996_quat_mi2s_snd_shutdown start
1737[ 260.356347] tfa stop
1738[ 260.364908] msm8996_quat_mi2s_snd_shutdown end
1739[ 261.578112] mdss_dsi_ack_err_status: status=1008000
1740[ 262.657036] msm8996_quat_mi2s_snd_startup
1741[ 262.671021] state: 0
1742[ 262.713975] trigger:1(0:stop 1:start)
1743[ 266.589024] mdss_dsi_ack_err_status: status=1008000
1744[ 269.403426] binder: transaction release 87209 bad handle 68
1745[ 271.600331] mdss_dsi_ack_err_status: status=1008000
1746[ 271.602534] trigger:0(0:stop 1:start)
1747[ 271.602603] state: 1
1748[ 271.631217] msm8996_quat_mi2s_snd_shutdown start
1749[ 271.631239] tfa stop
1750[ 271.639351] msm8996_quat_mi2s_snd_shutdown end
1751[ 272.331796] BQ: bq27541_battery_soc: bq27541_battery_soc = 93
1752[ 272.819854] msm8996_quat_mi2s_snd_startup
1753[ 272.834803] state: 0
1754[ 272.885017] trigger:1(0:stop 1:start)
1755[ 276.612971] mdss_dsi_ack_err_status: status=1008000
1756[ 278.339056] trigger:0(0:stop 1:start)
1757[ 278.339148] state: 1
1758[ 278.367554] msm8996_quat_mi2s_snd_shutdown start
1759[ 278.367575] tfa stop
1760[ 278.374699] msm8996_quat_mi2s_snd_shutdown end
1761[ 278.887846] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
1762[ 278.887994] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
1763[ 280.314964] msm8996_quat_mi2s_snd_startup
1764[ 280.328808] state: 0
1765[ 280.374923] trigger:1(0:stop 1:start)
1766[ 281.640495] mdss_dsi_ack_err_status: status=1008000
1767[ 286.656198] mdss_dsi_ack_err_status: status=1008000
1768[ 288.549035] trigger:0(0:stop 1:start)
1769[ 288.549103] state: 1
1770[ 288.578364] msm8996_quat_mi2s_snd_shutdown start
1771[ 288.578388] tfa stop
1772[ 288.586536] msm8996_quat_mi2s_snd_shutdown end
1773[ 289.224927] msm8996_quat_mi2s_snd_startup
1774[ 289.239610] state: 0
1775[ 289.285686] trigger:1(0:stop 1:start)
1776[ 291.663733] mdss_dsi_ack_err_status: status=1008000
1777[ 292.441357] trigger:0(0:stop 1:start)
1778[ 292.441414] state: 1
1779[ 292.468188] msm8996_quat_mi2s_snd_shutdown start
1780[ 292.468209] tfa stop
1781[ 292.475747] msm8996_quat_mi2s_snd_shutdown end
1782[ 294.350857] msm8996_quat_mi2s_snd_startup
1783[ 294.365551] state: 0
1784[ 294.413608] trigger:1(0:stop 1:start)
1785[ 296.675401] mdss_dsi_ack_err_status: status=1008000
1786[ 301.686610] mdss_dsi_ack_err_status: status=1008000
1787[ 302.708900] trigger:0(0:stop 1:start)
1788[ 302.709055] state: 1
1789[ 302.735395] msm8996_quat_mi2s_snd_shutdown start
1790[ 302.735462] tfa stop
1791[ 302.746180] msm8996_quat_mi2s_snd_shutdown end
1792[ 302.953722] msm8996_quat_mi2s_snd_startup
1793[ 302.967722] state: 0
1794[ 303.015017] trigger:1(0:stop 1:start)
1795[ 306.697242] mdss_dsi_ack_err_status: status=1008000
1796[ 308.418326] touchkey,s1302: touch_key[0x0],touchkey_state[0x2]
1797[ 311.707945] mdss_dsi_ack_err_status: status=1008000
1798[ 316.714616] mdss_dsi_ack_err_status: status=1008000
1799[ 317.081088] trigger:0(0:stop 1:start)
1800[ 317.081123] state: 1
1801[ 317.104323] msm8996_quat_mi2s_snd_shutdown start
1802[ 317.104339] tfa stop
1803[ 317.112298] msm8996_quat_mi2s_snd_shutdown end
1804[ 321.726620] mdss_dsi_ack_err_status: status=1008000
1805[ 326.652332] msm8996_quat_mi2s_snd_startup
1806[ 326.666288] state: 0
1807[ 326.714983] trigger:1(0:stop 1:start)
1808[ 326.742691] mdss_dsi_ack_err_status: status=1008000
1809[ 331.754795] mdss_dsi_ack_err_status: status=1008000
1810[ 332.131204] trigger:0(0:stop 1:start)
1811[ 332.131355] state: 1
1812[ 332.156578] msm8996_quat_mi2s_snd_shutdown start
1813[ 332.156642] tfa stop
1814[ 332.167887] msm8996_quat_mi2s_snd_shutdown end
1815[ 336.766505] mdss_dsi_ack_err_status: status=1008000
1816[ 340.661779] msm8996_quat_mi2s_snd_startup
1817[ 340.675872] state: 0
1818[ 340.726029] trigger:1(0:stop 1:start)
1819[ 341.778310] mdss_dsi_ack_err_status: status=1008000
1820[ 345.111536] trigger:0(0:stop 1:start)
1821[ 345.111596] state: 1
1822[ 345.135440] msm8996_quat_mi2s_snd_shutdown start
1823[ 345.135461] tfa stop
1824[ 345.142924] msm8996_quat_mi2s_snd_shutdown end
1825[ 346.206951] msm8996_quat_mi2s_snd_startup
1826[ 346.220501] state: 0
1827[ 346.266341] trigger:1(0:stop 1:start)
1828[ 346.789750] mdss_dsi_ack_err_status: status=1008000
1829[ 349.419196] trigger:0(0:stop 1:start)
1830[ 349.419251] state: 1
1831[ 349.442786] msm8996_quat_mi2s_snd_shutdown start
1832[ 349.442806] tfa stop
1833[ 349.450167] msm8996_quat_mi2s_snd_shutdown end
1834[ 351.396297] msm8996_quat_mi2s_snd_startup
1835[ 351.410869] state: 0
1836[ 351.454498] trigger:1(0:stop 1:start)
1837[ 351.800627] mdss_dsi_ack_err_status: status=1008000
1838[ 352.832725] touchkey,s1302: touch_key[0x0],touchkey_state[0x2]
1839[ 354.600527] trigger:0(0:stop 1:start)
1840[ 354.600671] state: 1
1841[ 354.625858] msm8996_quat_mi2s_snd_shutdown start
1842[ 354.625922] tfa stop
1843[ 354.636683] msm8996_quat_mi2s_snd_shutdown end
1844[ 354.793633] msm8996_quat_mi2s_snd_startup
1845[ 354.807071] state: 0
1846[ 354.854242] trigger:1(0:stop 1:start)
1847[ 356.814133] mdss_dsi_ack_err_status: status=1008000
1848[ 360.524671] trigger:0(0:stop 1:start)
1849[ 360.524749] state: 1
1850[ 360.550366] msm8996_quat_mi2s_snd_shutdown start
1851[ 360.550384] tfa stop
1852[ 360.558678] msm8996_quat_mi2s_snd_shutdown end
1853[ 361.828347] mdss_dsi_ack_err_status: status=1008000
1854[ 366.849251] mdss_dsi_ack_err_status: status=1008000
1855[ 371.867941] mdss_dsi_ack_err_status: status=1008000
1856[ 376.875117] mdss_dsi_ack_err_status: status=1008000
1857[ 381.884743] mdss_dsi_ack_err_status: status=1008000
1858[ 386.898563] mdss_dsi_ack_err_status: status=1008000
1859[ 391.919072] mdss_dsi_ack_err_status: status=1008000
1860[ 396.933009] mdss_dsi_ack_err_status: status=1008000
1861[ 401.945028] mdss_dsi_ack_err_status: status=1008000
1862[ 406.958956] mdss_dsi_ack_err_status: status=1008000
1863[ 411.974913] mdss_dsi_ack_err_status: status=1008000
1864[ 414.869596] msm8996_quat_mi2s_snd_startup
1865[ 414.883349] state: 0
1866[ 414.937534] trigger:1(0:stop 1:start)
1867[ 416.982842] mdss_dsi_ack_err_status: status=1008000
1868[ 421.034379] trigger:0(0:stop 1:start)
1869[ 421.034435] state: 1
1870[ 421.057730] msm8996_quat_mi2s_snd_shutdown start
1871[ 421.057749] tfa stop
1872[ 421.065736] msm8996_quat_mi2s_snd_shutdown end
1873[ 421.995398] mdss_dsi_ack_err_status: status=1008000
1874[ 422.543658] msm8996_quat_mi2s_snd_startup
1875[ 422.557375] state: 0
1876[ 422.602346] trigger:1(0:stop 1:start)
1877[ 423.211569] init: Untracked pid 6348 exited with status 78
1878[ 423.227736] init: Untracked pid 6350 exited with status 0
1879[ 423.507579] init: Untracked pid 6365 exited with status 200
1880[ 423.520496] init: Untracked pid 6367 exited with status 0
1881[ 423.862884] init: Untracked pid 6381 exited with status 248
1882[ 423.884011] init: Untracked pid 6383 exited with status 0
1883[ 424.140094] init: Untracked pid 6394 exited with status 229
1884[ 424.155293] init: Untracked pid 6399 exited with status 0
1885[ 425.733279] trigger:0(0:stop 1:start)
1886[ 425.733447] state: 1
1887[ 425.761786] msm8996_quat_mi2s_snd_shutdown start
1888[ 425.761846] tfa stop
1889[ 425.772552] msm8996_quat_mi2s_snd_shutdown end
1890[ 426.301728] msm8996_quat_mi2s_snd_startup
1891[ 426.315302] state: 0
1892[ 426.364852] trigger:1(0:stop 1:start)
1893[ 427.003816] mdss_dsi_ack_err_status: status=1008000
1894[ 432.010548] mdss_dsi_ack_err_status: status=1008000
1895[ 432.976252] trigger:0(0:stop 1:start)
1896[ 432.976394] state: 1
1897[ 432.999964] msm8996_quat_mi2s_snd_shutdown start
1898[ 432.999983] tfa stop
1899[ 433.006927] msm8996_quat_mi2s_snd_shutdown end
1900[ 435.015146] msm8996_quat_mi2s_snd_startup
1901[ 435.029060] state: 0
1902[ 435.075108] trigger:1(0:stop 1:start)
1903[ 437.026669] mdss_dsi_ack_err_status: status=1008000
1904[ 438.226535] trigger:0(0:stop 1:start)
1905[ 438.226680] state: 1
1906[ 438.252802] msm8996_quat_mi2s_snd_shutdown start
1907[ 438.252861] tfa stop
1908[ 438.262830] msm8996_quat_mi2s_snd_shutdown end
1909[ 442.048394] mdss_dsi_ack_err_status: status=1008000
1910[ 447.059018] mdss_dsi_ack_err_status: status=1008000
1911[ 450.235456] msm8996_quat_mi2s_snd_startup
1912[ 450.248743] state: 0
1913[ 450.290804] trigger:1(0:stop 1:start)
1914[ 452.085355] mdss_dsi_ack_err_status: status=1008000
1915[ 454.485118] trigger:0(0:stop 1:start)
1916[ 454.485246] state: 1
1917[ 454.513244] msm8996_quat_mi2s_snd_shutdown start
1918[ 454.513314] tfa stop
1919[ 454.524048] msm8996_quat_mi2s_snd_shutdown end
1920[ 457.098923] mdss_dsi_ack_err_status: status=1008000
1921[ 459.548329] msm8996_quat_mi2s_snd_startup
1922[ 459.562009] state: 0
1923[ 459.616792] trigger:1(0:stop 1:start)
1924[ 462.114920] mdss_dsi_ack_err_status: status=1008000
1925[ 466.952080] trigger:0(0:stop 1:start)
1926[ 466.952241] state: 1
1927[ 466.976524] msm8996_quat_mi2s_snd_shutdown start
1928[ 466.976592] tfa stop
1929[ 466.987688] msm8996_quat_mi2s_snd_shutdown end
1930[ 467.128723] mdss_dsi_ack_err_status: status=1008000
1931[ 467.588179] msm8996_quat_mi2s_snd_startup
1932[ 467.601786] state: 0
1933[ 467.654700] trigger:1(0:stop 1:start)
1934[ 472.014171] trigger:0(0:stop 1:start)
1935[ 472.014221] state: 1
1936[ 472.039222] msm8996_quat_mi2s_snd_shutdown start
1937[ 472.039258] tfa stop
1938[ 472.047716] msm8996_quat_mi2s_snd_shutdown end
1939[ 472.146464] mdss_dsi_ack_err_status: status=1008000
1940[ 477.151576] mdss_dsi_ack_err_status: status=1008000
1941[ 482.166596] mdss_dsi_ack_err_status: status=1008000
1942[ 487.178025] mdss_dsi_ack_err_status: status=1008000
1943[ 492.194094] mdss_dsi_ack_err_status: status=1008000
1944[ 493.047411] msm8996_quat_mi2s_snd_startup
1945[ 493.061290] state: 0
1946[ 493.104418] trigger:1(0:stop 1:start)
1947[ 497.205396] mdss_dsi_ack_err_status: status=1008000
1948[ 499.741364] init: Untracked pid 6460 exited with status 249
1949[ 499.761811] init: Untracked pid 6463 exited with status 0
1950[ 500.094601] init: Untracked pid 6476 exited with status 136
1951[ 500.109411] init: Untracked pid 6478 exited with status 0
1952[ 501.306137] touchkey,s1302: touch_key[0x0],touchkey_state[0x2]
1953[ 501.371846] init: Untracked pid 6499 exited with status 204
1954[ 501.398679] init: Untracked pid 6501 exited with status 0
1955[ 501.681797] init: Untracked pid 6519 exited with status 227
1956[ 501.696589] init: Untracked pid 6522 exited with status 0
1957[ 502.015212] init: Untracked pid 6537 exited with status 22
1958[ 502.028925] init: Untracked pid 6539 exited with status 0
1959[ 502.212404] mdss_dsi_ack_err_status: status=1008000
1960[ 502.302608] init: Untracked pid 6554 exited with status 23
1961[ 502.317591] init: Untracked pid 6556 exited with status 0
1962[ 502.472904] trigger:0(0:stop 1:start)
1963[ 502.472991] state: 1
1964[ 502.497746] msm8996_quat_mi2s_snd_shutdown start
1965[ 502.497757] tfa stop
1966[ 502.505109] msm8996_quat_mi2s_snd_shutdown end
1967[ 502.528590] msm8996_quat_mi2s_snd_startup
1968[ 502.541757] state: 0
1969[ 502.593921] trigger:1(0:stop 1:start)
1970[ 503.553265] binder: transaction release 163644 bad handle 32
1971[ 506.449547] trigger:0(0:stop 1:start)
1972[ 506.449597] state: 1
1973[ 506.472459] msm8996_quat_mi2s_snd_shutdown start
1974[ 506.472474] tfa stop
1975[ 506.479294] msm8996_quat_mi2s_snd_shutdown end
1976[ 507.228955] mdss_dsi_ack_err_status: status=1008000
1977[ 512.247468] mdss_dsi_ack_err_status: status=1008000
1978[ 517.267966] mdss_dsi_ack_err_status: status=1008000
1979[ 522.279255] mdss_dsi_ack_err_status: status=1008000
1980[ 527.297861] mdss_dsi_ack_err_status: status=1008000
1981[ 537.338763] mdss_dsi_ack_err_status: status=1008000
1982[ 542.356512] mdss_dsi_ack_err_status: status=1008000
1983[ 547.366299] mdss_dsi_ack_err_status: status=1008000
1984[ 548.709552] msm8996_quat_mi2s_snd_startup
1985[ 548.723356] state: 0
1986[ 548.774910] trigger:1(0:stop 1:start)
1987[ 552.382695] mdss_dsi_ack_err_status: status=1008000
1988[ 555.288229] trigger:0(0:stop 1:start)
1989[ 555.288257] state: 1
1990[ 555.312822] msm8996_quat_mi2s_snd_shutdown start
1991[ 555.312841] tfa stop
1992[ 555.319703] msm8996_quat_mi2s_snd_shutdown end
1993[ 557.401602] mdss_dsi_ack_err_status: status=1008000
1994[ 562.418685] mdss_dsi_ack_err_status: status=1008000
1995[ 572.458802] mdss_dsi_ack_err_status: status=1008000
1996[ 587.538350] mdss_dsi_ack_err_status: status=1008000
1997[ 592.549394] mdss_dsi_ack_err_status: status=1008000
1998[ 597.566133] mdss_dsi_ack_err_status: status=1008000
1999[ 607.588591] mdss_dsi_ack_err_status: status=1008000
2000[ 612.289626] synaptics,s3320: enter gesture mode
2001[ 612.634209] i2c-msm-v2 75b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x28 MSTR_STS:0x0d1300c8 OPER:0x00000090
2002[ 612.634280] pn544_dev_write : i2c_master_send returned -107
2003[ 613.256090] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
2004[ 613.256217] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
2005[ 613.256335] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
2006[ 614.591763] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
2007[ 614.591891] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
2008[ 614.592007] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
2009[ 617.714894] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
2010[ 617.715029] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
2011[ 617.715149] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
2012[ 617.863921] mdss_dsi_ack_err_status: status=1008000
2013[ 622.874997] mdss_dsi_ack_err_status: status=1008000
2014[ 627.883963] mdss_dsi_ack_err_status: status=1008000
2015[ 632.587784] msm8996_quat_mi2s_snd_startup
2016[ 632.601232] state: 0
2017[ 632.645194] trigger:1(0:stop 1:start)
2018[ 632.890190] mdss_dsi_ack_err_status: status=1008000
2019[ 635.777794] trigger:0(0:stop 1:start)
2020[ 635.777892] state: 1
2021[ 635.802558] msm8996_quat_mi2s_snd_shutdown start
2022[ 635.802604] tfa stop
2023[ 635.811435] msm8996_quat_mi2s_snd_shutdown end
2024[ 637.915736] mdss_dsi_ack_err_status: status=1008000
2025[ 641.764109] msm8996_quat_mi2s_snd_startup
2026[ 641.778104] state: 0
2027[ 641.824214] trigger:1(0:stop 1:start)
2028[ 642.924584] mdss_dsi_ack_err_status: status=1008000
2029[ 647.933065] mdss_dsi_ack_err_status: status=1008000
2030[ 650.013544] trigger:0(0:stop 1:start)
2031[ 650.013588] state: 1
2032[ 650.037424] msm8996_quat_mi2s_snd_shutdown start
2033[ 650.037445] tfa stop
2034[ 650.045754] msm8996_quat_mi2s_snd_shutdown end
2035[ 652.941559] mdss_dsi_ack_err_status: status=1008000
2036[ 657.966781] mdss_dsi_ack_err_status: status=1008000
2037[ 662.991104] mdss_dsi_ack_err_status: status=1008000
2038[ 668.016939] mdss_dsi_ack_err_status: status=1008000
2039[ 673.023907] mdss_dsi_ack_err_status: status=1008000
2040[ 675.708352] BQ: bq27541_battery_soc: bq27541_battery_soc = 92
2041[ 678.031981] mdss_dsi_ack_err_status: status=1008000
2042[ 680.978567] touchkey,s1302: touch_key[0x0],touchkey_state[0x2]
2043[ 682.793975] msm8996_quat_mi2s_snd_startup
2044[ 682.808527] state: 0
2045[ 682.851219] trigger:1(0:stop 1:start)
2046[ 683.059256] mdss_dsi_ack_err_status: status=1008000
2047[ 683.059312] synaptics,s3320: enter gesture mode
2048[ 683.482489] i2c-msm-v2 75b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x28 MSTR_STS:0x0d1300c8 OPER:0x00000090
2049[ 683.484035] pn544_dev_write : i2c_master_send returned -107
2050[ 686.075745] trigger:0(0:stop 1:start)
2051[ 686.075883] state: 1
2052[ 686.101738] msm8996_quat_mi2s_snd_shutdown start
2053[ 686.101791] tfa stop
2054[ 686.112446] msm8996_quat_mi2s_snd_shutdown end
2055[ 708.040270] Error: returning -512 value
2056[ 708.042021] Freezing of tasks aborted after 0.002 seconds
2057[ 708.206763] Error: returning -512 value
2058[ 708.209180] Freezing of tasks aborted after 0.003 seconds
2059[ 708.387087] Error: returning -512 value
2060[ 712.588027] Error: returning -512 value
2061[ 713.286673] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -16
2062[ 713.286692] PM: Device alarmtimer failed to suspend: error -16
2063[ 713.296947] PM: Some devices failed to suspend, or early wake event detected
2064[ 715.363032] Error: returning -512 value
2065[ 715.366060] Freezing of tasks aborted after 0.004 seconds
2066[ 715.538076] Error: returning -512 value
2067[ 729.712283] Error: returning -512 value
2068[ 729.714934] Freezing of tasks aborted after 0.003 seconds
2069[ 729.948423] Error: returning -512 value
2070[ 729.950911] Freezing of tasks aborted after 0.003 seconds
2071[ 730.117917] Error: returning -512 value
2072[ 730.156641] PM: Some devices failed to suspend, or early wake event detected
2073[ 730.420654] Error: returning -512 value
2074[ 730.422743] Freezing of tasks aborted after 0.002 seconds
2075[ 731.412161] Freezing of tasks aborted after 0.002 seconds
2076[ 732.493963] i2c-msm-v2 75b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x28 MSTR_STS:0x0d1300c8 OPER:0x00000090
2077[ 732.494042] pn544_dev_write : i2c_master_send returned -107
2078[ 736.813957] mdss_dsi_ack_err_status: status=1008000
2079[ 741.821215] mdss_dsi_ack_err_status: status=1008000
2080[ 742.155625] synaptics,s3320: enter gesture mode
2081[ 742.270019] i2c-msm-v2 75b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x28 MSTR_STS:0x0d1300c8 OPER:0x00000090
2082[ 742.270081] pn544_dev_write : i2c_master_send returned -107
2083[ 742.634157] <CORE> smem:rpm:rpm_requests[1:2] xprt_single_threaded_tx: Error -28 writing data
2084[ 746.006629] ffs_epfile_io: 3 callbacks suppressed
2085[ 746.006649] Error: returning -512 value
2086[ 746.009252] Freezing of tasks aborted after 0.003 seconds
2087[ 746.180129] Error: returning -512 value
2088[ 746.182809] Freezing of tasks aborted after 0.003 seconds
2089[ 746.363668] Error: returning -512 value
2090[ 749.779245] Error: returning -512 value
2091[ 749.782303] Freezing of tasks aborted after 0.004 seconds
2092[ 749.961187] Error: returning -512 value
2093[ 749.963061] Freezing of tasks aborted after 0.002 seconds
2094[ 750.116598] Error: returning -512 value
2095[ 750.136199] dpm_run_callback(): platform_pm_suspend+0x0/0x50 returns -16
2096[ 750.136204] PM: Device alarmtimer failed to suspend: error -16
2097[ 750.147988] PM: Some devices failed to suspend, or early wake event detected
2098[ 751.173263] PWM device already freed
2099[ 751.173361] PWM device already freed
2100[ 751.173415] PWM device already freed
2101[ 751.173472] PWM device already freed
2102[ 751.173527] PWM device already freed
2103[ 751.173583] PWM device already freed
2104[ 751.173648] PWM device already freed
2105[ 751.173699] PWM device already freed
2106[ 751.173748] PWM device already freed
2107[ 751.173797] PWM device already freed
2108[ 751.173850] PWM device already freed
2109[ 751.173914] PWM device already freed
2110[ 751.173963] PWM device already freed
2111[ 751.174012] PWM device already freed
2112[ 751.174060] PWM device already freed
2113[ 751.174366] PWM device already freed
2114[ 751.174559] PWM device already freed
2115[ 751.174741] PWM device already freed
2116[ 751.261120] msm8996_quat_mi2s_snd_startup
2117[ 751.274578] state: 0
2118[ 751.325190] trigger:1(0:stop 1:start)
2119[ 751.923802] PWM device already freed
2120[ 751.923914] PWM device already freed
2121[ 751.924021] PWM device already freed
2122[ 751.984450] i2c-msm-v2 75b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x28 MSTR_STS:0x0d1300c8 OPER:0x00000090
2123[ 751.984671] pn544_dev_write : i2c_master_send returned -107
2124[ 754.920653] trigger:0(0:stop 1:start)
2125[ 754.920697] state: 1
2126[ 754.944232] msm8996_quat_mi2s_snd_shutdown start
2127[ 754.944272] tfa stop
2128[ 754.952512] msm8996_quat_mi2s_snd_shutdown end
2129[ 756.916650] mdss_dsi_ack_err_status: status=1008000
2130[ 761.939916] mdss_dsi_ack_err_status: status=1008000