· 6 years ago · Sep 05, 2019, 06:52 PM
1[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x517f803c]
2[ 0.000000] Linux version 5.2.0-99-generic (buildd@bos02-arm64-036) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)) #5laptops1-Ubuntu SMP Wed Jul 17 17:08:48 UTC 2019 (Ubuntu 5.2.0-99.5laptops1-generic 5.2.0-rc5)
3[ 0.000000] efi: Getting EFI parameters from FDT:
4[ 0.000000] efi: EFI v2.60 by American Megatrends
5[ 0.000000] efi: ACPI 2.0=0x27c9be000 ESRT=0x278a18a18 SMBIOS=0xff5a8000 MEMATTR=0x278a0e018 RNG=0x27c864c18 MEMRESERVE=0x275744e98
6[ 0.000000] efi: seeding entropy pool
7[ 0.000000] secureboot: Secure boot disabled
8[ 0.000000] esrt: Reserving ESRT space from 0x0000000278a18a18 to 0x0000000278a18a50.
9[ 0.000000] cma: Reserved 32 MiB at 0x00000000fd000000
10[ 0.000000] ACPI: Early table checksum verification disabled
11[ 0.000000] ACPI: RSDP 0x000000027C9BE000 000024 (v02 LENOVO)
12[ 0.000000] ACPI: XSDT 0x000000027C9BD000 000094 (v01 LENOVO CB-01 00000001 QCOM 00000001)
13[ 0.000000] ACPI: FACP 0x000000027C97A000 000114 (v05 LENOVO CB-01 00000001 QCOM 00000001)
14[ 0.000000] ACPI: DSDT 0x000000027C97B000 0378A9 (v02 LENOVO CB-01 00000001 MSFT 05000000)
15[ 0.000000] ACPI: SSDT 0x000000027C9BC000 000505 (v02 LENOVO CB-01 00000001 INTL 20120913)
16[ 0.000000] ACPI: BGRT 0x000000027C9BB000 000038 (v01 LENOVO CB-01 00000001 QCOM 00000001)
17[ 0.000000] ACPI: CSRT 0x000000027C9B4000 006855 (v00 LENOVO CB-01 00000001 QCOM 00000001)
18[ 0.000000] ACPI: DBG2 0x000000027C9B3000 000246 (v01 LENOVO CB-01 00000001 QCOM 00000001)
19[ 0.000000] ACPI: GTDT 0x000000027C979000 00009C (v02 LENOVO CB-01 00000001 QCOM 00000001)
20[ 0.000000] ACPI: IORT 0x000000027C977000 00111B (v00 LENOVO CB-01 00000001 QCOM 00000001)
21[ 0.000000] ACPI: APIC 0x000000027C976000 0002ED (v05 LENOVO CB-01 00000001 QCOM 00000001)
22[ 0.000000] ACPI: MCFG 0x000000027C975000 00002C (v01 LENOVO CB-01 00000001 QCOM 00000001)
23[ 0.000000] ACPI: PPTT 0x000000027C974000 00019E (v01 LENOVO CB-01 00000001 QCOM 00000001)
24[ 0.000000] ACPI: TPM2 0x000000027C973000 000054 (v03 LENOVO CB-01 00000001 QCOM 00000001)
25[ 0.000000] ACPI: MSDM 0x000000027C972000 000055 (v03 LENOVO CB-01 00000001 QCOM 00000000)
26[ 0.000000] ACPI: SSDT 0x000000027C970000 001D72 (v01 LENOVO CB-01 00000001 INTL 20120913)
27[ 0.000000] ACPI: FPDT 0x000000027C96F000 000044 (v01 LENOVO CB-01 00000001 QCOM 00000001)
28[ 0.000000] ACPI: [Firmware Bug]: Unsupported FADT revision 5.0, should be 5.1+
29[ 0.000000] ACPI: FADT has ARM boot flags set, assuming 5.1
30[ 0.000000] ACPI: NUMA: Failed to initialise from firmware
31[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000027c9bffff]
32[ 0.000000] NUMA: NODE_DATA [mem 0x27b693f80-0x27b696fff]
33[ 0.000000] Zone ranges:
34[ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff]
35[ 0.000000] Normal [mem 0x0000000100000000-0x000000027c9bffff]
36[ 0.000000] Movable zone start for each node
37[ 0.000000] Early memory node ranges
38[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000803fffff]
39[ 0.000000] node 0: [mem 0x0000000080400000-0x0000000080d5ffff]
40[ 0.000000] node 0: [mem 0x0000000081ac0000-0x00000000856fffff]
41[ 0.000000] node 0: [mem 0x0000000085d00000-0x0000000085f0ffff]
42[ 0.000000] node 0: [mem 0x0000000085f10000-0x0000000085fbffff]
43[ 0.000000] node 0: [mem 0x0000000085fe0000-0x0000000085ffffff]
44[ 0.000000] node 0: [mem 0x000000008b500000-0x00000000994fffff]
45[ 0.000000] node 0: [mem 0x0000000099500000-0x000000009ffcffff]
46[ 0.000000] node 0: [mem 0x000000009ffd0000-0x000000009ffd9fff]
47[ 0.000000] node 0: [mem 0x000000009ffdd000-0x000000009fffffff]
48[ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff595fff]
49[ 0.000000] node 0: [mem 0x00000000ff596000-0x00000000ff596fff]
50[ 0.000000] node 0: [mem 0x00000000ff597000-0x00000000ff5a6fff]
51[ 0.000000] node 0: [mem 0x00000000ff5a7000-0x00000000ff5a9fff]
52[ 0.000000] node 0: [mem 0x00000000ff5aa000-0x00000000ff5d1fff]
53[ 0.000000] node 0: [mem 0x00000000ff5d2000-0x00000000ff5d3fff]
54[ 0.000000] node 0: [mem 0x00000000ff5d4000-0x000000027c50efff]
55[ 0.000000] node 0: [mem 0x000000027c50f000-0x000000027c892fff]
56[ 0.000000] node 0: [mem 0x000000027c893000-0x000000027c9bffff]
57[ 0.000000] Zeroed struct page in unavailable ranges: 551 pages
58[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027c9bffff]
59[ 0.000000] On node 0 totalpages: 2056509
60[ 0.000000] DMA32 zone: 8192 pages used for memmap
61[ 0.000000] DMA32 zone: 0 pages reserved
62[ 0.000000] DMA32 zone: 497533 pages, LIFO batch:63
63[ 0.000000] Normal zone: 24359 pages used for memmap
64[ 0.000000] Normal zone: 1558976 pages, LIFO batch:63
65[ 0.000000] psci: probing for conduit method from ACPI.
66[ 0.000000] psci: PSCIv1.1 detected in firmware.
67[ 0.000000] psci: Using standard PSCI v0.2 function IDs
68[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
69[ 0.000000] psci: SMC Calling Convention v1.1
70[ 0.000000] ACPI: SRAT not present
71[ 0.000000] percpu: Embedded 33 pages/cpu s94424 r8192 d32552 u135168
72[ 0.000000] pcpu-alloc: s94424 r8192 d32552 u135168 alloc=33*4096
73[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
74[ 0.000000] Detected VIPT I-cache on CPU0
75[ 0.000000] CPU features: detected: GIC system register CPU interface
76[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
77[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
78[ 0.000000] CPU features: detected: Hardware dirty bit management
79[ 0.000000] Speculative Store Bypass Disable mitigation not required
80[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2023958
81[ 0.000000] Policy zone: Normal
82[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.2.0-99-generic root=UUID=2858da24-7ab8-4dd5-8a9e-7e3ac21fc15e ro efi=novamap
83[ 0.000000] software IO TLB: mapped [mem 0xf9000000-0xfd000000] (64MB)
84[ 0.000000] Memory: 7629112K/8226036K available (12476K kernel code, 1918K rwdata, 5628K rodata, 6144K init, 1170K bss, 564156K reserved, 32768K cma-reserved)
85[ 0.000000] random: get_random_u64 called from kmem_cache_open+0x3c/0x4d8 with crng_init=0
86[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
87[ 0.000000] ftrace: allocating 43344 entries in 170 pages
88[ 0.000000] rcu: Hierarchical RCU implementation.
89[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
90[ 0.000000] Tasks RCU enabled.
91[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
92[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
93[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
94[ 0.000000] GICv3: Distributor has no Range Selector support
95[ 0.000000] GICv3: no VLPI support, no direct LPI support
96[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
97[ 0.000000] ACPI: SRAT not present
98[ 0.000000] ITS: No ITS available, not enabling LPIs
99[ 0.000000] ACPI GTDT: found 1 memory-mapped timer block(s).
100[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
101[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
102[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
103[ 0.000117] Console: colour dummy device 80x25
104[ 0.000586] printk: console [tty0] enabled
105[ 0.000672] ACPI: Core revision 20190509
106[ 0.001690] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
107[ 0.001707] pid_max: default: 32768 minimum: 301
108[ 0.001808] LSM: Security Framework initializing
109[ 0.001833] Yama: becoming mindful.
110[ 0.001923] AppArmor: AppArmor initialized
111[ 0.004387] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
112[ 0.005650] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
113[ 0.005830] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
114[ 0.005894] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
115[ 0.006400] *** VALIDATE proc ***
116[ 0.006644] *** VALIDATE cgroup1 ***
117[ 0.006655] *** VALIDATE cgroup2 ***
118[ 0.007418] ASID allocator initialised with 32768 entries
119[ 0.007492] rcu: Hierarchical SRCU implementation.
120[ 0.009261] Remapping and enabling EFI services.
121[ 0.009778] smp: Bringing up secondary CPUs ...
122[ 0.011410] Detected VIPT I-cache on CPU1
123[ 0.011454] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
124[ 0.011523] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]
125[ 0.013126] Detected VIPT I-cache on CPU2
126[ 0.013149] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
127[ 0.013192] CPU2: Booted secondary processor 0x0000000200 [0x517f803c]
128[ 0.014885] Detected VIPT I-cache on CPU3
129[ 0.014908] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
130[ 0.014950] CPU3: Booted secondary processor 0x0000000300 [0x517f803c]
131[ 0.017292] Detected VIPT I-cache on CPU4
132[ 0.017319] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
133[ 0.017362] CPU4: Booted secondary processor 0x0000000400 [0x516f802d]
134[ 0.019443] Detected VIPT I-cache on CPU5
135[ 0.019472] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
136[ 0.019516] CPU5: Booted secondary processor 0x0000000500 [0x516f802d]
137[ 0.021759] Detected VIPT I-cache on CPU6
138[ 0.021788] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
139[ 0.021833] CPU6: Booted secondary processor 0x0000000600 [0x516f802d]
140[ 0.024226] Detected VIPT I-cache on CPU7
141[ 0.024257] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
142[ 0.024302] CPU7: Booted secondary processor 0x0000000700 [0x516f802d]
143[ 0.024394] smp: Brought up 1 node, 8 CPUs
144[ 0.024495] SMP: Total of 8 processors activated.
145[ 0.024503] CPU features: detected: Privileged Access Never
146[ 0.024509] CPU features: detected: LSE atomic instructions
147[ 0.024515] CPU features: detected: User Access Override
148[ 0.024521] CPU features: detected: 32-bit EL0 Support
149[ 0.024529] CPU features: detected: Common not Private translations
150[ 0.024536] CPU features: detected: Data cache clean to Point of Persistence
151[ 0.024544] CPU features: detected: RAS Extension Support
152[ 0.024550] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
153[ 0.024558] CPU features: detected: CRC32 instructions
154[ 0.029861] CPU: All CPU(s) started at EL1
155[ 0.029906] alternatives: patching kernel code
156[ 0.038589] devtmpfs: initialized
157[ 0.039722] Registered cp15_barrier emulation handler
158[ 0.039753] Registered setend emulation handler
159[ 0.040080] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
160[ 0.040115] futex hash table entries: 2048 (order: 5, 131072 bytes)
161[ 0.041288] pinctrl core: initialized pinctrl subsystem
162[ 0.041970] SMBIOS 3.0 present.
163[ 0.041988] DMI: LENOVO 81JL/LNVNB161216, BIOS 9UCN23WW(V1.06) 10/25/2018
164[ 0.042494] NET: Registered protocol family 16
165[ 0.042926] audit: initializing netlink subsys (disabled)
166[ 0.043051] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1
167[ 0.043662] cpuidle: using governor ladder
168[ 0.043682] cpuidle: using governor menu
169[ 0.043814] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
170[ 0.046623] DMA: preallocated 256 KiB pool for atomic allocations
171[ 0.046893] ACPI: bus type PCI registered
172[ 0.046905] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
173[ 0.047104] Serial: AMBA PL011 UART driver
174[ 0.052393] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
175[ 0.052403] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
176[ 0.052410] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
177[ 0.052420] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
178[ 0.062488] ACPI: Added _OSI(Module Device)
179[ 0.062500] ACPI: Added _OSI(Processor Device)
180[ 0.062508] ACPI: Added _OSI(3.0 _SCP Extensions)
181[ 0.062516] ACPI: Added _OSI(Processor Aggregator Device)
182[ 0.062527] ACPI: Added _OSI(Linux-Dell-Video)
183[ 0.062535] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
184[ 0.062544] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
185[ 0.091482] ACPI: 3 ACPI AML tables successfully acquired and loaded
186[ 0.097628] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.CPU0 (20190509/dspkginit-440)
187[ 0.097655] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.CPU1 (20190509/dspkginit-440)
188[ 0.097672] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.CPU2 (20190509/dspkginit-440)
189[ 0.097688] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.CPU3 (20190509/dspkginit-440)
190[ 0.097704] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.CPU4 (20190509/dspkginit-440)
191[ 0.097720] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.CPU5 (20190509/dspkginit-440)
192[ 0.097736] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.CPU6 (20190509/dspkginit-440)
193[ 0.097752] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.CPU7 (20190509/dspkginit-440)
194[ 0.097817] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_SB_.GPU0.AVS0 (20190509/dspkginit-440)
195[ 0.100730] ACPI: Interpreter enabled
196[ 0.100741] ACPI: Using GIC for interrupt routing
197[ 0.100787] ACPI: MCFG table detected, 0 entries
198[ 0.111192] ACPI: Power Resource [WRST] (on)
199[ 0.113227] ACPI Warning: \_SB.GPU0._CLS: Return Package is too small - found 1 elements, expected 3 (20190509/nsprepkg-364)
200[ 0.124254] ACPI Error: No handler for Region [ERAM] ((____ptrval____)) [GenericSerialBus] (20190509/evregion-132)
201[ 0.124275] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20190509/exfldio-265)
202[ 0.124292] ACPI Error: Aborting method \_SB.I2C2.ECRW due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
203[ 0.124316] ACPI Error: Aborting method \_SB.TSC2._STA due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
204[ 0.124756] ACPI Error: No handler for Region [ERAM] ((____ptrval____)) [GenericSerialBus] (20190509/evregion-132)
205[ 0.124772] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20190509/exfldio-265)
206[ 0.124787] ACPI Error: Aborting method \_SB.I2C2.ECRW due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
207[ 0.124807] ACPI Error: Aborting method \_SB.TSEL._STA due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
208[ 0.137858] ACPI Error: No handler for Region [ERAM] ((____ptrval____)) [GenericSerialBus] (20190509/evregion-132)
209[ 0.137875] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20190509/exfldio-265)
210[ 0.137890] ACPI Error: Aborting method \_SB.I2C2.ECRW due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
211[ 0.137911] ACPI Error: Aborting method \_SB.TSC2._STA due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
212[ 0.138069] ACPI Error: No handler for Region [ERAM] ((____ptrval____)) [GenericSerialBus] (20190509/evregion-132)
213[ 0.138084] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20190509/exfldio-265)
214[ 0.138099] ACPI Error: Aborting method \_SB.I2C2.ECRW due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
215[ 0.138119] ACPI Error: Aborting method \_SB.TSEL._STA due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
216[ 0.140605] SCSI subsystem initialized
217[ 0.140762] libata version 3.00 loaded.
218[ 0.140905] vgaarb: loaded
219[ 0.141006] ACPI: bus type USB registered
220[ 0.141072] usbcore: registered new interface driver usbfs
221[ 0.141107] usbcore: registered new interface driver hub
222[ 0.141178] usbcore: registered new device driver usb
223[ 0.141387] pps_core: LinuxPPS API ver. 1 registered
224[ 0.141395] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
225[ 0.141416] PTP clock support registered
226[ 0.141591] EDAC MC: Ver: 3.0.0
227[ 0.141916] Registered efivars operations
228[ 0.141968] efivars: get_next_variable: status=8000000000000003
229[ 0.143115] NetLabel: Initializing
230[ 0.143123] NetLabel: domain hash size = 128
231[ 0.143130] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
232[ 0.143184] NetLabel: unlabeled traffic allowed by default
233[ 0.143545] clocksource: Switched to clocksource arch_sys_counter
234[ 0.197338] VFS: Disk quotas dquot_6.6.0
235[ 0.197414] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
236[ 0.197552] *** VALIDATE hugetlbfs ***
237[ 0.197990] AppArmor: AppArmor Filesystem Enabled
238[ 0.198302] pnp: PnP ACPI init
239[ 0.199745] ACPI Error: No handler for Region [ERAM] ((____ptrval____)) [GenericSerialBus] (20190509/evregion-132)
240[ 0.199768] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20190509/exfldio-265)
241[ 0.199785] ACPI Error: Aborting method \_SB.I2C2.ECRW due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
242[ 0.199813] ACPI Error: Aborting method \_SB.TSC2._STA due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
243[ 0.199832] ACPI Error: Method execution failed \_SB.TSC2._STA due to previous error (AE_NOT_EXIST) (20190509/uteval-69)
244[ 0.199990] ACPI Error: No handler for Region [ERAM] ((____ptrval____)) [GenericSerialBus] (20190509/evregion-132)
245[ 0.200005] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20190509/exfldio-265)
246[ 0.200020] ACPI Error: Aborting method \_SB.I2C2.ECRW due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
247[ 0.200039] ACPI Error: Aborting method \_SB.TSEL._STA due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
248[ 0.200057] ACPI Error: Method execution failed \_SB.TSEL._STA due to previous error (AE_NOT_EXIST) (20190509/uteval-69)
249[ 0.200191] pnp: PnP ACPI: found 0 devices
250[ 0.206639] NET: Registered protocol family 2
251[ 0.207082] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
252[ 0.207201] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
253[ 0.207655] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
254[ 0.208472] TCP: Hash tables configured (established 65536 bind 65536)
255[ 0.208597] UDP hash table entries: 4096 (order: 5, 131072 bytes)
256[ 0.208692] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
257[ 0.208918] NET: Registered protocol family 1
258[ 0.208943] NET: Registered protocol family 44
259[ 0.208957] PCI: CLS 0 bytes, default 64
260[ 0.209108] Trying to unpack rootfs image as initramfs...
261[ 0.914239] Freeing initrd memory: 76064K
262[ 0.915129] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
263[ 0.915354] hw perfevents: enabled with armv8_pmuv3_1 PMU driver, 7 counters available
264[ 0.915372] kvm [1]: HYP mode not available
265[ 0.917526] Initialise system trusted keyrings
266[ 0.917571] Key type blacklist registered
267[ 0.917802] workingset: timestamp_bits=40 max_order=21 bucket_order=0
268[ 0.922992] zbud: loaded
269[ 0.924413] squashfs: version 4.0 (2009/01/31) Phillip Lougher
270[ 0.925167] fuse: init (API version 7.31)
271[ 0.925647] Platform Keyring initialized
272[ 0.932072] Key type asymmetric registered
273[ 0.932081] Asymmetric key parser 'x509' registered
274[ 0.932117] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
275[ 0.932296] io scheduler mq-deadline registered
276[ 0.934878] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
277[ 0.935918] efifb: probing for efifb
278[ 0.935972] efifb: framebuffer at 0x80400000, using 8100k, total 8100k
279[ 0.935982] efifb: mode is 1920x1080x32, linelength=7680, pages=1
280[ 0.935988] efifb: scrolling: redraw
281[ 0.935996] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
282[ 0.951562] Console: switching to colour frame buffer device 240x67
283[ 0.966737] fb0: EFI VGA frame buffer device
284[ 0.967510] ACPI: AC Adapter [ADP1] (on-line)
285[ 0.968259] [Firmware Bug]: No valid trip found
286[ 0.968502] ACPI: Invalid passive threshold
287[ 0.968572] [Firmware Bug]: No valid trip found
288[ 0.968682] [Firmware Bug]: No valid trip found
289[ 0.968879] ACPI: Invalid passive threshold
290[ 0.968950] [Firmware Bug]: No valid trip found
291[ 0.969151] ACPI: Invalid passive threshold
292[ 0.969219] [Firmware Bug]: No valid trip found
293[ 0.969417] ACPI: Invalid passive threshold
294[ 0.969487] [Firmware Bug]: No valid trip found
295[ 0.969684] ACPI: Invalid passive threshold
296[ 0.969754] [Firmware Bug]: No valid trip found
297[ 0.969953] ACPI: Invalid passive threshold
298[ 0.970021] [Firmware Bug]: No valid trip found
299[ 0.970214] ACPI: Invalid passive threshold
300[ 0.970283] [Firmware Bug]: No valid trip found
301[ 0.970482] ACPI: Invalid passive threshold
302[ 0.970563] [Firmware Bug]: No valid trip found
303[ 0.970798] ACPI: Invalid passive threshold
304[ 0.971018] ACPI: Invalid passive threshold
305[ 0.971088] [Firmware Bug]: No valid trip found
306[ 0.971298] ACPI: Invalid passive threshold
307[ 0.971369] [Firmware Bug]: No valid trip found
308[ 0.971463] [Firmware Bug]: No valid trip found
309[ 0.971674] ACPI: Invalid passive threshold
310[ 0.971749] [Firmware Bug]: No valid trip found
311[ 0.974742] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
312[ 0.981221] msm_serial: driver initialized
313[ 0.981767] arm-smmu arm-smmu.0.auto: can't request region for resource [mem 0x15000000-0x1510ffff]
314[ 0.981886] arm-smmu: probe of arm-smmu.0.auto failed with error -16
315[ 0.982006] arm-smmu arm-smmu.1.auto: probing hardware configuration...
316[ 0.982089] arm-smmu arm-smmu.1.auto: SMMUv2 with:
317[ 0.982200] arm-smmu arm-smmu.1.auto: stage 1 translation
318[ 0.982272] arm-smmu arm-smmu.1.auto: address translation ops
319[ 0.982346] arm-smmu arm-smmu.1.auto: non-coherent table walk
320[ 0.982421] arm-smmu arm-smmu.1.auto: (IDR0.CTTW overridden by FW configuration)
321[ 0.982514] arm-smmu arm-smmu.1.auto: stream matching with 5 register groups
322[ 0.982636] arm-smmu arm-smmu.1.auto: 5 context banks (0 stage-2 only)
323[ 0.982745] arm-smmu arm-smmu.1.auto: Supported page sizes: 0x63315000
324[ 0.982828] arm-smmu arm-smmu.1.auto: Stage-1: 48-bit VA -> 36-bit IPA
325[ 0.994859] loop: module loaded
326[ 0.999437] libphy: Fixed MDIO Bus: probed
327[ 1.002500] tun: Universal TUN/TAP device driver, 1.6
328[ 1.006118] PPP generic driver version 2.4.2
329[ 1.009315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
330[ 1.012387] ehci-pci: EHCI PCI platform driver
331[ 1.015483] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
332[ 1.018552] ohci-pci: OHCI PCI platform driver
333[ 1.021610] uhci_hcd: USB Universal Host Controller Interface driver
334[ 1.024947] mousedev: PS/2 mouse device common for all mice
335[ 1.028566] i2c /dev entries driver
336[ 1.032256] device-mapper: uevent: version 1.0.3
337[ 1.035525] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
338[ 1.039242] ledtrig-cpu: registered to indicate activity on CPUs
339[ 1.042524] EFI Variables Facility v0.08 2004-May-17
340[ 1.045675] efivars: get_next_variable: status=8000000000000003
341[ 1.050500] NET: Registered protocol family 10
342[ 1.077295] Segment Routing with IPv6
343[ 1.080525] NET: Registered protocol family 17
344[ 1.083722] Key type dns_resolver registered
345[ 1.087444] registered taskstats version 1
346[ 1.090540] Loading compiled-in X.509 certificates
347[ 1.099407] Loaded X.509 cert 'Build time autogenerated kernel key: 9dda1d3b9e4accd6838185b5c6746965b300b720'
348[ 1.102651] zswap: loaded using pool lzo/zbud
349[ 1.126670] Key type big_key registered
350[ 1.140006] Key type encrypted registered
351[ 1.143104] AppArmor: AppArmor sha1 policy hashing enabled
352[ 1.146296] Couldn't get size: Unknown error code (0x8000000000000003)
353[ 1.149445] MODSIGN: Couldn't get UEFI db list
354[ 1.152603] Couldn't get size: Unknown error code (0x8000000000000003)
355[ 1.155815] Couldn't get UEFI MokListRT
356[ 1.159021] Couldn't get size: Unknown error code (0x8000000000000003)
357[ 1.162252] Couldn't get UEFI dbx list
358[ 1.165467] ima: No TPM chip found, activating TPM-bypass!
359[ 1.168725] ima: Allocated hash algorithm: sha1
360[ 1.171992] No architecture policies found
361[ 1.175257] evm: Initialising EVM extended attributes:
362[ 1.178509] evm: security.selinux
363[ 1.181740] evm: security.SMACK64
364[ 1.184951] evm: security.SMACK64EXEC
365[ 1.188138] evm: security.SMACK64TRANSMUTE
366[ 1.191294] evm: security.SMACK64MMAP
367[ 1.194431] evm: security.apparmor
368[ 1.197544] evm: security.ima
369[ 1.200631] evm: security.capability
370[ 1.203704] evm: HMAC attrs: 0x1
371[ 1.207013] hctosys: unable to open rtc device (rtc0)
372[ 1.216231] Freeing unused kernel memory: 6144K
373[ 1.302515] Checked W+X mappings: passed, no W+X pages found
374[ 1.305751] Run /init as init process
375[ 1.524732] hidraw: raw HID events driver (C) Jiri Kosina
376[ 1.532513] gpio gpiochip0: (QCOM0217:00): failed to get GPIO descriptor
377[ 1.535200] sdm845-pinctrl QCOM0217:00: Failed to request GPIO
378[ 1.538276] geni_i2c QCOM0220:00: Bus frequency not specified, default to 100kHz.
379[ 1.542549] ACPI Error: No handler for Region [ERAM] ((____ptrval____)) [GenericSerialBus] (20190509/evregion-132)
380[ 1.545277] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20190509/exfldio-265)
381[ 1.548007] ACPI Error: Aborting method \_SB.I2C2.ECRW due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
382[ 1.550796] ACPI Error: Aborting method \_SB.TSC2._STA due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
383[ 1.553838] ACPI Error: No handler for Region [ERAM] ((____ptrval____)) [GenericSerialBus] (20190509/evregion-132)
384[ 1.556714] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20190509/exfldio-265)
385[ 1.559593] ACPI Error: Aborting method \_SB.I2C2.ECRW due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
386[ 1.562556] ACPI Error: Aborting method \_SB.TSEL._STA due to previous error (AE_NOT_EXIST) (20190509/psparse-531)
387[ 1.575696] scsi host0: ufshcd
388[ 1.610737] ufshcd-qcom QCOM24A5:00: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
389[ 1.623023] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
390[ 1.626797] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
391[ 1.630734] xhci-hcd xhci-hcd.3.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000002010010
392[ 1.634535] xhci-hcd xhci-hcd.3.auto: irq 128, io mem 0x0a800000
393[ 1.638558] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
394[ 1.642337] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
395[ 1.646095] usb usb1: Product: xHCI Host Controller
396[ 1.649857] usb usb1: Manufacturer: Linux 5.2.0-99-generic xhci-hcd
397[ 1.653625] usb usb1: SerialNumber: xhci-hcd.3.auto
398[ 1.657924] hub 1-0:1.0: USB hub found
399[ 1.661699] hub 1-0:1.0: 1 port detected
400[ 1.665718] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
401[ 1.669456] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
402[ 1.673218] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
403[ 1.677003] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
404[ 1.680803] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
405[ 1.684513] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
406[ 1.688237] usb usb2: Product: xHCI Host Controller
407[ 1.691940] usb usb2: Manufacturer: Linux 5.2.0-99-generic xhci-hcd
408[ 1.695665] usb usb2: SerialNumber: xhci-hcd.3.auto
409[ 1.699748] hub 2-0:1.0: USB hub found
410[ 1.703485] hub 2-0:1.0: 1 port detected
411[ 1.714812] ufshcd-qcom QCOM24A5:00: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
412[ 1.718092] ufshcd-qcom QCOM24A5:00: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
413[ 1.721852] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
414[ 1.725574] scsi 0:0:0:49488: Attached scsi generic sg0 type 30
415[ 1.729216] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
416[ 1.732897] scsi 0:0:0:49476: Attached scsi generic sg1 type 30
417[ 1.736412] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
418[ 1.740106] scsi 0:0:0:49456: Attached scsi generic sg2 type 30
419[ 1.743959] scsi 0:0:0:0: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
420[ 1.747712] scsi 0:0:0:1: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
421[ 1.751329] scsi 0:0:0:2: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
422[ 1.754925] scsi 0:0:0:3: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
423[ 1.758542] scsi 0:0:0:4: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
424[ 1.762075] scsi 0:0:0:5: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0500 PQ: 0 ANSI: 6
425[ 1.765645] sd 0:0:0:0: Power-on or device reset occurred
426[ 1.765776] sd 0:0:0:0: Attached scsi generic sg3 type 0
427[ 1.769952] sd 0:0:0:0: [sda] 29765632 4096-byte logical blocks: (122 GB/114 GiB)
428[ 1.772767] sd 0:0:0:1: Power-on or device reset occurred
429[ 1.772863] sd 0:0:0:1: Attached scsi generic sg4 type 0
430[ 1.773310] sd 0:0:0:2: Attached scsi generic sg5 type 0
431[ 1.773716] sd 0:0:0:3: Attached scsi generic sg6 type 0
432[ 1.774145] sd 0:0:0:4: Attached scsi generic sg7 type 0
433[ 1.774592] sd 0:0:0:5: Attached scsi generic sg8 type 0
434[ 1.798232] sd 0:0:0:5: Power-on or device reset occurred
435[ 1.802024] sd 0:0:0:2: Power-on or device reset occurred
436[ 1.805792] sd 0:0:0:3: Power-on or device reset occurred
437[ 1.809518] sd 0:0:0:4: Power-on or device reset occurred
438[ 1.813242] sd 0:0:0:0: [sda] Write Protect is off
439[ 1.814034] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
440[ 1.814061] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
441[ 1.814098] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB)
442[ 1.814167] sd 0:0:0:2: [sdc] Write Protect is off
443[ 1.814172] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
444[ 1.814202] sd 0:0:0:3: [sdd] Write Protect is off
445[ 1.814206] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
446[ 1.814308] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB)
447[ 1.814312] sd 0:0:0:5: [sdf] 393216 4096-byte logical blocks: (1.61 GB/1.50 GiB)
448[ 1.814430] sd 0:0:0:4: [sde] Write Protect is off
449[ 1.814435] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
450[ 1.814436] sd 0:0:0:5: [sdf] Write Protect is off
451[ 1.814440] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
452[ 1.814447] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
453[ 1.814450] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
454[ 1.814554] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes
455[ 1.814560] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes
456[ 1.814622] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
457[ 1.814627] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
458[ 1.814697] sd 0:0:0:4: [sde] Optimal transfer size 8192 bytes
459[ 1.814703] sd 0:0:0:5: [sdf] Optimal transfer size 8192 bytes
460[ 1.816239] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
461[ 1.817865] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
462[ 1.818549] sdd: sdd2 sdd3
463[ 1.818591] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27
464[ 1.818653] sdc: sdc1 sdc2
465[ 1.818662] sdf: sdf2 sdf3 sdf4 sdf5
466[ 1.819367] sd 0:0:0:1: [sdb] Write Protect is off
467[ 1.820512] sd 0:0:0:3: [sdd] Attached SCSI disk
468[ 1.820569] sd 0:0:0:2: [sdc] Attached SCSI disk
469[ 1.821058] sd 0:0:0:5: [sdf] Attached SCSI disk
470[ 1.822380] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes
471[ 1.823549] random: fast init done
472[ 1.823572] random: systemd-udevd: uninitialized urandom read (16 bytes read)
473[ 1.823591] random: systemd-udevd: uninitialized urandom read (16 bytes read)
474[ 1.823625] random: systemd-udevd: uninitialized urandom read (16 bytes read)
475[ 1.824493] sd 0:0:0:4: [sde] Attached SCSI disk
476[ 1.825330] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
477[ 1.825505] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
478[ 1.831467] sda: sda1 sda2 sda3 sda4
479[ 1.834323] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes
480[ 1.846838] sd 0:0:0:0: [sda] Attached SCSI disk
481[ 1.853848] sdb: sdb1 sdb2
482[ 1.928381] sd 0:0:0:1: [sdb] Attached SCSI disk
483[ 2.003580] usb 1-1: new high-speed USB device number 2 using xhci-hcd
484[ 2.154039] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=69.41
485[ 2.156507] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
486[ 2.158910] usb 1-1: Product: USB2.1 Hub
487[ 2.161284] usb 1-1: Manufacturer: GenesysLogic
488[ 2.221237] hub 1-1:1.0: USB hub found
489[ 2.223841] hub 1-1:1.0: 3 ports detected
490[ 2.285063] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
491[ 2.310436] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=69.41
492[ 2.313279] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
493[ 2.316150] usb 2-1: Product: USB3.1 Hub
494[ 2.319019] usb 2-1: Manufacturer: GenesysLogic
495[ 2.349208] hub 2-1:1.0: USB hub found
496[ 2.352470] hub 2-1:1.0: 2 ports detected
497[ 2.363752] battery: ACPI: Battery Slot [BAT0] (battery present)
498[ 2.367674] geni_i2c QCOM0220:01: Bus frequency not specified, default to 100kHz.
499[ 2.392826] i2c_hid i2c-MSFT0001:01: i2c-MSFT0001:01 supply vdd not found, using dummy regulator
500[ 2.396004] i2c_hid i2c-MSFT0001:01: i2c-MSFT0001:01 supply vddl not found, using dummy regulator
501[ 2.466496] geni_i2c QCOM0220:02: Bus frequency not specified, default to 100kHz.
502[ 2.474110] i2c_hid i2c-ELAN901C:00: i2c-ELAN901C:00 supply vdd not found, using dummy regulator
503[ 2.477306] i2c_hid i2c-ELAN901C:00: i2c-ELAN901C:00 supply vddl not found, using dummy regulator
504[ 2.490596] i2c_hid i2c-ELAN901C:00: i2c_hid_get_input: IRQ triggered but there's no data
505[ 2.579384] geni_i2c QCOM0220:03: Bus frequency not specified, default to 100kHz.
506[ 2.595567] usb 1-1.3: new high-speed USB device number 3 using xhci-hcd
507[ 2.598266] geni_i2c QCOM0220:04: Bus frequency not specified, default to 100kHz.
508[ 2.603011] i2c_hid i2c-ENES6243:00: i2c-ENES6243:00 supply vdd not found, using dummy regulator
509[ 2.606528] i2c_hid i2c-ENES6243:00: i2c-ENES6243:00 supply vddl not found, using dummy regulator
510[ 2.733363] geni_i2c QCOM0220:05: Bus frequency not specified, default to 100kHz.
511[ 2.737733] usb 1-1.3: New USB device found, idVendor=5986, idProduct=2115, bcdDevice=54.20
512[ 2.740666] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
513[ 2.743621] usb 1-1.3: Product: Integrated Camera
514[ 2.746549] usb 1-1.3: Manufacturer: SunplusIT Inc
515[ 2.759200] input: MSFT0001:01 04F3:30BC Mouse as /devices/platform/QCOM0220:01/i2c-1/i2c-MSFT0001:01/0018:04F3:30BC.0001/input/input0
516[ 2.763372] input: MSFT0001:01 04F3:30BC Touchpad as /devices/platform/QCOM0220:01/i2c-1/i2c-MSFT0001:01/0018:04F3:30BC.0001/input/input2
517[ 2.767467] hid-generic 0018:04F3:30BC.0001: input,hidraw0: I2C HID v1.00 Mouse [MSFT0001:01 04F3:30BC] on i2c-MSFT0001:01
518[ 2.773342] input: ELAN901C:00 04F3:2800 Touchscreen as /devices/platform/QCOM0220:02/i2c-2/i2c-ELAN901C:00/0018:04F3:2800.0002/input/input3
519[ 2.777538] input: ELAN901C:00 04F3:2800 as /devices/platform/QCOM0220:02/i2c-2/i2c-ELAN901C:00/0018:04F3:2800.0002/input/input4
520[ 2.781767] input: ELAN901C:00 04F3:2800 as /devices/platform/QCOM0220:02/i2c-2/i2c-ELAN901C:00/0018:04F3:2800.0002/input/input5
521[ 2.785925] input: ELAN901C:00 04F3:2800 as /devices/platform/QCOM0220:02/i2c-2/i2c-ELAN901C:00/0018:04F3:2800.0002/input/input6
522[ 2.790185] hid-generic 0018:04F3:2800.0002: input,hidraw1: I2C HID v1.00 Device [ELAN901C:00 04F3:2800] on i2c-ELAN901C:00
523[ 2.805547] input: ENES6243:00 6243:0001 Keyboard as /devices/platform/QCOM0220:04/i2c-4/i2c-ENES6243:00/0018:6243:0001.0003/input/input9
524[ 2.807664] usb 2-1.2: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
525[ 2.809936] input: ENES6243:00 6243:0001 Consumer Control as /devices/platform/QCOM0220:04/i2c-4/i2c-ENES6243:00/0018:6243:0001.0003/input/input10
526[ 2.817586] input: ENES6243:00 6243:0001 Wireless Radio Control as /devices/platform/QCOM0220:04/i2c-4/i2c-ENES6243:00/0018:6243:0001.0003/input/input12
527[ 2.822150] input: ENES6243:00 6243:0001 as /devices/platform/QCOM0220:04/i2c-4/i2c-ENES6243:00/0018:6243:0001.0003/input/input13
528[ 2.826811] hid-generic 0018:6243:0001.0003: input,hidraw2: I2C HID v1.00 Keyboard [ENES6243:00 6243:0001] on i2c-ENES6243:00
529[ 2.832740] usb 2-1.2: New USB device found, idVendor=0781, idProduct=5595, bcdDevice= 1.00
530[ 2.836412] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
531[ 2.839989] usb 2-1.2: Product: Ultra USB 3.0
532[ 2.843466] usb 2-1.2: Manufacturer: SanDisk
533[ 2.846956] usb 2-1.2: SerialNumber: 4C530000320401121504
534[ 2.858808] usb-storage 2-1.2:1.0: USB Mass Storage device detected
535[ 2.863490] scsi host1: usb-storage 2-1.2:1.0
536[ 2.868300] usbcore: registered new interface driver usb-storage
537[ 2.876080] usbcore: registered new interface driver uas
538[ 3.880488] scsi 1:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6
539[ 3.884886] sd 1:0:0:0: Attached scsi generic sg9 type 0
540[ 3.885046] sd 1:0:0:0: [sdg] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB)
541[ 3.892767] sd 1:0:0:0: [sdg] Write Protect is off
542[ 3.896457] sd 1:0:0:0: [sdg] Mode Sense: 43 00 00 00
543[ 3.896851] sd 1:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
544[ 3.912458] sdg: sdg1 sdg2
545[ 3.918362] sd 1:0:0:0: [sdg] Attached SCSI removable disk
546[ 4.307560] raid6: neonx8 gen() 2763 MB/s
547[ 4.355552] raid6: neonx8 xor() 2239 MB/s
548[ 4.403565] raid6: neonx4 gen() 2806 MB/s
549[ 4.451542] raid6: neonx4 xor() 2316 MB/s
550[ 4.499547] raid6: neonx2 gen() 1985 MB/s
551[ 4.547545] raid6: neonx2 xor() 1788 MB/s
552[ 4.595572] raid6: neonx1 gen() 1351 MB/s
553[ 4.627347] random: crng init done
554[ 4.631681] random: 7 urandom warning(s) missed due to ratelimiting
555[ 4.643549] raid6: neonx1 xor() 1269 MB/s
556[ 4.691563] raid6: int64x8 gen() 1209 MB/s
557[ 4.739560] raid6: int64x8 xor() 680 MB/s
558[ 4.787569] raid6: int64x4 gen() 1204 MB/s
559[ 4.835571] raid6: int64x4 xor() 633 MB/s
560[ 4.883550] raid6: int64x2 gen() 1129 MB/s
561[ 4.931578] raid6: int64x2 xor() 588 MB/s
562[ 4.979583] raid6: int64x1 gen() 813 MB/s
563[ 5.027552] raid6: int64x1 xor() 460 MB/s
564[ 5.030939] raid6: using algorithm neonx4 gen() 2806 MB/s
565[ 5.034333] raid6: .... xor() 2316 MB/s, rmw enabled
566[ 5.037705] raid6: using neon recovery algorithm
567[ 5.047100] xor: measuring software checksum speed
568[ 5.087543] 8regs : 3817.000 MB/sec
569[ 5.127543] 32regs : 3703.000 MB/sec
570[ 5.167542] arm64_neon: 3385.000 MB/sec
571[ 5.170744] xor: using function: 8regs (3817.000 MB/sec)
572[ 5.176515] async_tx: api initialized (async)
573[ 5.342698] Btrfs loaded, crc32c=crc32c-generic
574[ 5.660701] EXT4-fs (sdg2): mounted filesystem with ordered data mode. Opts: (null)
575[ 6.166117] systemd[1]: System time before build time, advancing clock.
576[ 6.242113] systemd[1]: Inserted module 'autofs4'
577[ 6.268289] efivars: get_next_variable: status=8000000000000003
578[ 6.277200] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
579[ 6.285440] systemd[1]: Detected architecture arm64.
580[ 6.311334] systemd[1]: Set hostname to <ubuntu>.
581[ 6.316738] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
582[ 7.062000] systemd[1]: Listening on Journal Socket.
583[ 7.074220] systemd[1]: Mounting Kernel Debug File System...
584[ 7.082255] systemd[1]: Listening on Device-mapper event daemon FIFOs.
585[ 7.092867] systemd[1]: Mounting POSIX Message Queue File System...
586[ 7.101611] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
587[ 7.111799] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
588[ 7.189450] EXT4-fs (sdg2): re-mounted. Opts: errors=remount-ro
589[ 7.224226] lp: driver loaded but no devices found
590[ 7.238037] ppdev: user-space parallel port driver
591[ 7.437662] Adding 312700k swap on /swapfile. Priority:-2 extents:2 across:320892k FS
592[ 7.916917] systemd-journald[550]: Received request to flush runtime journal from PID 1
593[ 7.921068] systemd-journald[550]: File /var/log/journal/a8f2a82e68e1457e929c26d3097c8e95/system.journal corrupted or uncleanly shut down, renaming and replacing.
594[ 8.186668] acpi-tad ACPI000E:00: Unsupported capabilities
595[ 8.201340] soc_button_array ACPI0011:00: Unknown button index 3 upage 90 usage 20, ignoring
596[ 8.201349] soc_button_array ACPI0011:00: Unknown button index 4 upage 90 usage 21, ignoring
597[ 8.410821] media: Linux media interface: v0.10
598[ 8.414806] input: MSFT0001:01 04F3:30BC Touchpad as /devices/platform/QCOM0220:01/i2c-1/i2c-MSFT0001:01/0018:04F3:30BC.0001/input/input16
599[ 8.415098] hid-multitouch 0018:04F3:30BC.0001: input,hidraw0: I2C HID v1.00 Mouse [MSFT0001:01 04F3:30BC] on i2c-MSFT0001:01
600[ 8.455742] videodev: Linux video capture interface: v2.00
601[ 8.561644] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:2115)
602[ 8.579890] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized!
603[ 8.579900] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized!
604[ 8.579905] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
605[ 8.579909] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
606[ 8.580121] input: Integrated Camera: Integrated C as /devices/platform/QCOM2430:00/dwc3.2.auto/xhci-hcd.3.auto/usb1/1-1/1-1.3/1-1.3:1.0/input/input17
607[ 8.587047] usbcore: registered new interface driver uvcvideo
608[ 8.587052] USB Video Class driver (1.1.1)
609[ 8.677921] cryptd: max_cpu_qlen set to 1000
610[ 8.680741] input: ELAN901C:00 04F3:2800 as /devices/platform/QCOM0220:02/i2c-2/i2c-ELAN901C:00/0018:04F3:2800.0002/input/input18
611[ 8.681128] input: ELAN901C:00 04F3:2800 as /devices/platform/QCOM0220:02/i2c-2/i2c-ELAN901C:00/0018:04F3:2800.0002/input/input21
612[ 8.681470] hid-multitouch 0018:04F3:2800.0002: input,hidraw1: I2C HID v1.00 Device [ELAN901C:00 04F3:2800] on i2c-ELAN901C:00
613[ 10.433817] alua: device handler registered
614[ 10.437585] emc: device handler registered
615[ 10.441643] rdac: device handler registered
616[ 10.594958] device-mapper: multipath service-time: version 0.3.0 loaded
617[ 10.596337] device-mapper: table: 253:0: sdb too small for target: start=0, len=3145728, dev_size=8192
618[ 10.596343] device-mapper: core: Cannot calculate initial queue limits
619[ 10.599268] device-mapper: ioctl: unable to set up device queue for new table.
620[ 10.842299] audit: type=1400 audit(1559249447.671:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1311 comm="apparmor_parser"
621[ 10.845965] audit: type=1400 audit(1559249447.675:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1310 comm="apparmor_parser"
622[ 10.845979] audit: type=1400 audit(1559249447.675:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1310 comm="apparmor_parser"
623[ 10.846959] audit: type=1400 audit(1559249447.675:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1317 comm="apparmor_parser"
624[ 10.846970] audit: type=1400 audit(1559249447.675:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1317 comm="apparmor_parser"
625[ 10.847205] audit: type=1400 audit(1559249447.675:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1315 comm="apparmor_parser"
626[ 10.859151] audit: type=1400 audit(1559249447.687:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1318 comm="apparmor_parser"
627[ 10.870038] audit: type=1400 audit(1559249447.699:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1320 comm="apparmor_parser"
628[ 10.870051] audit: type=1400 audit(1559249447.699:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1320 comm="apparmor_parser"
629[ 10.870058] audit: type=1400 audit(1559249447.699:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1320 comm="apparmor_parser"
630[ 11.606091] systemd-journald[550]: Failed to read journal file /var/log/journal/a8f2a82e68e1457e929c26d3097c8e95/user-1000.journal for rotation, trying to move it out of the way: Text file busy
631[ 49.903736] rfkill: input handler disabled