· 9 years ago · Nov 06, 2016, 09:14 PM
1<6>[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpu
2<6>[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpuacct
3<5>[ 0.000000 / 01-01 00:00:00.000][0] Linux version 3.18.31-twrp-h918-1.0 (jc@westerley) (gcc version 6.1.1 20160711 (Linaro GCC 6.1-2016.08) ) #1 SMP PREEMPT Sun Nov 6 15:54:01 EST 2016
4<4>[ 0.000000 / 01-01 00:00:00.000][0] CPU: AArch64 Processor [511f2112] revision 2
5<6>[ 0.000000 / 01-01 00:00:00.000][0] alternatives: detected feature GIC system register CPU interface
6<6>[ 0.000000 / 01-01 00:00:00.000][0] L1_CACHE_BYTES (128) Cache Writeback Granule (128)
7<6>[ 0.000000 / 01-01 00:00:00.000][0] Machine: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP
8<6>[ 0.000000 / 01-01 00:00:00.000][0] efi: Getting EFI parameters from FDT:
9<6>[ 0.000000 / 01-01 00:00:00.000][0] efi: UEFI not found.
10<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 40 MiB
11<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'peripheral_region@8e900000': base 0x000000008e900000, size 45 MiB
12<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088000000, size 105 MiB
13<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
14<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'ramoops_region@c0000000': base 0x00000000c0000000, size 1 MiB
15<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'crash_fb_mem@c0100000': base 0x00000000c0100000, size 12 MiB
16<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000085800000, size 40 MiB
17<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
18<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x000000008e900000, size 45 MiB
19<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node peripheral_region@8e900000, compatible id removed-dma-pool
20<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
21<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
22<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
23<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
24<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
25<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
26<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
27<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
28<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
29<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000088000000, size 105 MiB
30<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
31<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x00000000c0000000, size 1 MiB
32<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node ramoops_region@c0000000, compatible id removed-dma-pool
33<6>[ 0.000000 / 01-01 00:00:00.000][0] cma: Reserved 32 MiB at 0x00000000f6800000
34<7>[ 0.000000 / 01-01 00:00:00.000][0] On node 0 totalpages: 992848
35<7>[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 7428 pages used for memmap
36<7>[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 0 pages reserved
37<7>[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 475392 pages, LIFO batch:31
38<7>[ 0.000000 / 01-01 00:00:00.000][0] Normal zone: 8086 pages used for memmap
39<7>[ 0.000000 / 01-01 00:00:00.000][0] Normal zone: 517456 pages, LIFO batch:31
40<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: probing for conduit method from DT.
41<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: PSCIv1.0 detected in firmware.
42<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: Using standard PSCI v0.2 function IDs
43<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
44<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
45<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
46<6>[ 0.000000 / 01-01 00:00:00.000][0] PERCPU: Embedded 13 pages/cpu @ffffffc0fe318000 s22144 r0 d31104 u53248
47<7>[ 0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: s22144 r0 d31104 u53248 alloc=13*4096
48<7>[ 0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
49<4>[ 0.000000 / 01-01 00:00:00.000][0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 977334
50<6>[ 0.000000 / 01-01 00:00:00.000][0] [LGE-HW_REV] board_revno_setup : [LGE-HW-REV] Rev.rev_10
51<6>[ 0.000000 / 01-01 00:00:00.000][0] CCMODE: CC mode disabled
52<6>[ 0.000000 / 01-01 00:00:00.000][0] LGE BOOT REASON: 0x77665502
53<6>[ 0.000000 / 01-01 00:00:00.000][0] [LGE-CD] boot_cable_setup : Boot cable : 400MA 8
54<6>[ 0.000000 / 01-01 00:00:00.000][0] [LGE-BATT-ID] battery_information_setup : Battery : SW3800_VC0 187
55<4>[ 0.000000 / 01-01 00:00:00.000][0] androidboot.dlcomplete = 0
56<6>[ 0.000000 / 01-01 00:00:00.000][0] PID hash table entries: 4096 (order: 3, 32768 bytes)
57<6>[ 0.000000 / 01-01 00:00:00.000][0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
58<6>[ 0.000000 / 01-01 00:00:00.000][0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
59<4>[ 0.000000 / 01-01 00:00:00.000][0] Memory: 3666484K/3971392K available (12732K kernel code, 1634K rwdata, 5584K rodata, 508K init, 2541K bss, 304908K reserved)
60<5>[ 0.000000 / 01-01 00:00:00.000][0] Virtual kernel memory layout:
61<5>[ 0.000000 / 01-01 00:00:00.000][0] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
62<5>[ 0.000000 / 01-01 00:00:00.000][0] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
63<5>[ 0.000000 / 01-01 00:00:00.000][0] 0xffffffbdc0000000 - 0xffffffbdc3f95400 ( 63 MB actual)
64<5>[ 0.000000 / 01-01 00:00:00.000][0] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
65<5>[ 0.000000 / 01-01 00:00:00.000][0] fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
66<5>[ 0.000000 / 01-01 00:00:00.000][0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
67<5>[ 0.000000 / 01-01 00:00:00.000][0] memory : 0xffffffc000000000 - 0xffffffc0fe550000 ( 4069 MB)
68<5>[ 0.000000 / 01-01 00:00:00.000][0] .init : 0xffffffc001266000 - 0xffffffc0012e5000 ( 508 KB)
69<6>[ 0.000000 / 01-01 00:00:00.000][0] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
70<6>[ 0.000000 / 01-01 00:00:00.000][0] HMP scheduling enabled.
71<6>[ 0.000000 / 01-01 00:00:00.000][0] Preemptible hierarchical RCU implementation.
72<6>[ 0.000000 / 01-01 00:00:00.000][0] RCU dyntick-idle grace-period acceleration is enabled.
73<6>[ 0.000000 / 01-01 00:00:00.000][0] NR_IRQS:64 nr_irqs:64 0
74<6>[ 0.000000 / 01-01 00:00:00.000][0] CPU0: found redistributor 0 region 0:0x0000000009c00000
75<4>[ 0.000000 / 01-01 00:00:00.000][0] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
76<3>[ 0.000000 / 01-01 00:00:00.000][0] MPM 1 irq mapping errored -517
77<6>[ 0.000000 / 01-01 00:00:00.000][0] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
78<6>[ 0.000003 / 01-01 00:00:00.000][0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
79<6>[ 0.000021 / 01-01 00:00:00.000][0] Switched to clocksource arch_sys_counter
80<6>[ 0.000848 / 01-01 00:00:00.000][0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
81<6>[ 0.000864 / 01-01 00:00:00.000][0] pid_max: default: 32768 minimum: 301
82<6>[ 0.001743 / 01-01 00:00:00.000][0] Security Framework initialized
83<6>[ 0.001761 / 01-01 00:00:00.000][0] SELinux: Initializing.
84<7>[ 0.001795 / 01-01 00:00:00.000][0] SELinux: Starting in permissive mode
85<6>[ 0.001832 / 01-01 00:00:00.000][0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
86<6>[ 0.001843 / 01-01 00:00:00.000][0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
87<6>[ 0.002369 / 01-01 00:00:00.000][0] Initializing cgroup subsys freezer
88<6>[ 0.002389 / 01-01 00:00:00.000][0] Initializing cgroup subsys net_cls
89<4>[ 0.002648 / 01-01 00:00:00.000][0] /cpus/cpu@0: Unknown CPU type
90<4>[ 0.002661 / 01-01 00:00:00.000][0] /cpus/cpu@1: Unknown CPU type
91<4>[ 0.002673 / 01-01 00:00:00.000][0] /cpus/cpu@100: Unknown CPU type
92<4>[ 0.002685 / 01-01 00:00:00.000][0] /cpus/cpu@101: Unknown CPU type
93<6>[ 0.002716 / 01-01 00:00:00.000][0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
94<6>[ 0.002741 / 01-01 00:00:00.000][0] EFI services will not be available.
95<4>[ 0.009137 / 01-01 00:00:00.000][0] NOHZ: local_softirq_pending 02
96<4>[ 0.010689 / 01-01 00:00:00.000][0]
97<4>[ 0.010689 / 01-01 00:00:00.000][0] **********************************************************
98<4>[ 0.010704 / 01-01 00:00:00.000][0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
99<4>[ 0.010711 / 01-01 00:00:00.000][0] ** **
100<4>[ 0.010717 / 01-01 00:00:00.000][0] ** trace_printk() being used. Allocating extra memory. **
101<4>[ 0.010723 / 01-01 00:00:00.000][0] ** **
102<4>[ 0.010730 / 01-01 00:00:00.000][0] ** This means that this is a DEBUG kernel and it is **
103<4>[ 0.010736 / 01-01 00:00:00.000][0] ** unsafe for produciton use. **
104<4>[ 0.010742 / 01-01 00:00:00.000][0] ** **
105<4>[ 0.010749 / 01-01 00:00:00.000][0] ** If you see this message and you are not debugging **
106<4>[ 0.010755 / 01-01 00:00:00.000][0] ** the kernel, report this immediately to your vendor! **
107<4>[ 0.010761 / 01-01 00:00:00.000][0] ** **
108<4>[ 0.010768 / 01-01 00:00:00.000][0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
109<4>[ 0.010774 / 01-01 00:00:00.000][0] **********************************************************
110<6>[ 0.011435 / 01-01 00:00:00.000][0] MSM Memory Dump base table set up
111<6>[ 0.011456 / 01-01 00:00:00.000][0] MSM Memory Dump apps data table set up
112<6>[ 0.012666 / 01-01 00:00:00.000][0] panic-handler: reserved[@0xc0100000+@0xc00000)
113<6>[ 0.014321 / 01-01 00:00:00.000][0] clock-cpu-8996: configuring clocks for the perf cluster
114<6>[ 0.014498 / 01-01 00:00:00.000][0] cpu_clock_8996_early_init: finished CPU clock configuration
115<6>[ 0.016917 / 01-01 00:00:00.000][1] CPU1: Booted secondary processor
116<6>[ 0.016940 / 01-01 00:00:00.000][1] CPU1: found redistributor 1 region 0:0x0000000009c40000
117<6>[ 0.019366 / 01-01 00:00:00.000][2] CPU2: Booted secondary processor
118<6>[ 0.019417 / 01-01 00:00:00.000][2] CPU2: found redistributor 100 region 0:0x0000000009c80000
119<6>[ 0.021645 / 01-01 00:00:00.019][3] CPU3: Booted secondary processor
120<6>[ 0.021662 / 01-01 00:00:00.019][3] CPU3: found redistributor 101 region 0:0x0000000009cc0000
121<6>[ 0.021796 / 01-01 00:00:00.019][0] Brought up 4 CPUs
122<6>[ 0.021849 / 01-01 00:00:00.019][0] SMP: Total of 4 processors activated.
123<6>[ 0.026830 / 01-01 00:00:00.019][0] DMI not present or invalid.
124<6>[ 0.034528 / 01-01 00:00:00.029][0] pinctrl core: initialized pinctrl subsystem
125<6>[ 0.034924 / 01-01 00:00:00.029][0] regulator-dummy: no parameters
126<6>[ 0.099237 / 01-01 00:00:00.089][0] NET: Registered protocol family 16
127<6>[ 0.130080 / 01-01 00:00:00.129][0] cpuidle: using governor ladder
128<6>[ 0.160074 / 01-01 00:00:00.159][0] cpuidle: using governor menu
129<6>[ 0.190081 / 01-01 00:00:00.189][1] cpuidle: using governor qcom
130<6>[ 0.191309 / 01-01 00:00:00.189][1] vdso: 2 pages (1 code @ ffffffc001309000, 1 data @ ffffffc001308000)
131<6>[ 0.191722 / 01-01 00:00:00.189][1] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
132<6>[ 0.192555 / 01-01 00:00:00.189][1] DMA: preallocated 2048 KiB pool for atomic allocations
133<3>[ 0.192823 / 01-01 00:00:00.189][1] msm_smem_init: unable to create logging context
134<3>[ 0.192864 / 01-01 00:00:00.189][1] msm_smd_init: unable to create SMD logging context
135<3>[ 0.192875 / 01-01 00:00:00.189][1] msm_smd_init: unable to create SMSM logging context
136<3>[ 0.193147 / 01-01 00:00:00.189][0] <CORE> glink_init: unable to create log context
137<3>[ 0.193352 / 01-01 00:00:00.189][0] <CORE> glink_core_register_transport: unable to create log context for [dsps:smd_trans]
138<3>[ 0.193525 / 01-01 00:00:00.189][1] <CORE> glink_core_register_transport: unable to create log context for [lpass:smd_trans]
139<3>[ 0.193687 / 01-01 00:00:00.189][0] <CORE> glink_core_register_transport: unable to create log context for [mpss:smd_trans]
140<3>[ 0.193806 / 01-01 00:00:00.189][0] <CORE> glink_core_register_transport: unable to create log context for [wcnss:smd_trans]
141<3>[ 0.193945 / 01-01 00:00:00.189][1] <CORE> glink_core_register_transport: unable to create log context for [rpm:smd_trans]
142<6>[ 0.205713 / 01-01 00:00:00.199][1] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
143<6>[ 0.206707 / 01-01 00:00:00.199][1] sps:sps is ready.
144<6>[ 0.207878 / 01-01 00:00:00.199][1] i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_default, deferring probe
145<6>[ 0.208367 / 01-01 00:00:00.199][1] i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_default, deferring probe
146<6>[ 0.208943 / 01-01 00:00:00.199][1] i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
147<3>[ 0.211024 / 01-01 00:00:00.209][1] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
148<3>[ 0.238146 / 01-01 00:00:00.229][1] smd_channel_probe_now: allocation table not initialized
149<3>[ 0.238467 / 01-01 00:00:00.229][1] smd_channel_probe_now: allocation table not initialized
150<3>[ 0.238764 / 01-01 00:00:00.229][1] smd_channel_probe_now: allocation table not initialized
151<3>[ 0.239065 / 01-01 00:00:00.229][1] smd_channel_probe_now: allocation table not initialized
152<6>[ 0.239329 / 01-01 00:00:00.229][1] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
153<6>[ 0.239646 / 01-01 00:00:00.229][0] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
154<6>[ 0.240535 / 01-01 00:00:00.239][0] msm_rpm_dev_probe: APSS-RPM communication over GLINK
155<3>[ 0.248778 / 01-01 00:00:00.239][2] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
156<3>[ 0.250372 / 01-01 00:00:00.249][2] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
157<6>[ 0.255445 / 01-01 00:00:00.249][2] pmi8994_s2: 400 <--> 1015 mV at 570 mV normal idle
158<6>[ 0.256097 / 01-01 00:00:00.249][2] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8e900000
159<6>[ 0.256394 / 01-01 00:00:00.249][2] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8e900000
160<6>[ 0.256716 / 01-01 00:00:00.249][2] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8e900000
161<6>[ 0.257096 / 01-01 00:00:00.249][2] platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
162<6>[ 0.259748 / 01-01 00:00:00.249][2] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
163<6>[ 0.259827 / 01-01 00:00:00.249][2] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
164<3>[ 0.259840 / 01-01 00:00:00.249][2] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
165<6>[ 0.259854 / 01-01 00:00:00.249][2] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
166<3>[ 0.259867 / 01-01 00:00:00.249][2] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
167<6>[ 0.264842 / 01-01 00:00:00.259][2] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
168<3>[ 0.265921 / 01-01 00:00:00.259][3] <CORE> glink_core_register_transport: unable to create log context for [mpss:smem]
169<3>[ 0.266679 / 01-01 00:00:00.259][3] <CORE> glink_core_register_transport: unable to create log context for [lpass:smem]
170<3>[ 0.267407 / 01-01 00:00:00.259][3] <CORE> glink_core_register_transport: unable to create log context for [dsps:smem]
171<3>[ 0.267995 / 01-01 00:00:00.259][3] <CORE> glink_core_register_transport: unable to create log context for [rpm:smem]
172<3>[ 0.268114 / 01-01 00:00:00.259][0] smd_channel_probe_now: allocation table not initialized
173<6>[ 0.268430 / 01-01 00:00:00.259][1] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
174<6>[ 0.269098 / 01-01 00:00:00.259][3] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
175<6>[ 0.269199 / 01-01 00:00:00.259][3] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
176<6>[ 0.269357 / 01-01 00:00:00.259][3] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
177<6>[ 0.269635 / 01-01 00:00:00.259][3] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
178<6>[ 0.271607 / 01-01 00:00:00.269][3] apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
179<6>[ 0.271960 / 01-01 00:00:00.269][3] apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
180<6>[ 0.272306 / 01-01 00:00:00.269][3] apcc_l3_mem_acc_corner: 0 <--> 0 mV
181<6>[ 0.272642 / 01-01 00:00:00.269][3] gfx_mem_acc_corner: 0 <--> 0 mV
182<6>[ 0.273049 / 01-01 00:00:00.269][3] kryo0-retention: 468 <--> 892 mV at 520 mV
183<6>[ 0.273262 / 01-01 00:00:00.269][3] kryo0: 468 <--> 892 mV at 754 mV
184<6>[ 0.273405 / 01-01 00:00:00.269][3] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
185<6>[ 0.273708 / 01-01 00:00:00.269][3] kryo1-retention: 468 <--> 892 mV at 520 mV
186<6>[ 0.273920 / 01-01 00:00:00.269][3] kryo1: 468 <--> 892 mV at 754 mV
187<6>[ 0.274061 / 01-01 00:00:00.269][3] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
188<6>[ 0.278544 / 01-01 00:00:00.269][3] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8e900000
189<3>[ 0.279894 / 01-01 00:00:00.269][3] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
190<4>[ 0.298947 / 01-01 00:00:00.289][3] __of_mpm_init(): MPM driver mapping exists
191<6>[ 0.304160 / 01-01 00:00:00.299][3] console [pstore-1] enabled
192<6>[ 0.304173 / 01-01 00:00:00.299][3] pstore: Registered ramoops as persistent store backend
193<6>[ 0.304186 / 01-01 00:00:00.299][3] ramoops: attached 0x80000@0xc0000000, ecc: 0/0
194<6>[ 0.305697 / 01-01 00:00:00.299][3] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
195<3>[ 0.305789 / 01-01 00:00:00.299][3] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
196<3>[ 0.305806 / 01-01 00:00:00.299][3] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
197<6>[ 0.307259 / 01-01 00:00:00.299][0] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
198<3>[ 0.307366 / 01-01 00:00:00.299][0] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
199<3>[ 0.307384 / 01-01 00:00:00.299][0] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
200<6>[ 0.308052 / 01-01 00:00:00.299][0] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
201<3>[ 0.308152 / 01-01 00:00:00.299][0] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
202<3>[ 0.308169 / 01-01 00:00:00.299][0] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
203<6>[ 0.308789 / 01-01 00:00:00.299][0] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
204<3>[ 0.308907 / 01-01 00:00:00.299][0] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
205<3>[ 0.308925 / 01-01 00:00:00.299][0] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
206<3>[ 0.309155 / 01-01 00:00:00.299][0] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
207<6>[ 0.310014 / 01-01 00:00:00.299][0] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
208<6>[ 0.310594 / 01-01 00:00:00.309][0] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
209<6>[ 0.311029 / 01-01 00:00:00.309][0] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
210<6>[ 0.311492 / 01-01 00:00:00.309][0] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
211<6>[ 0.311907 / 01-01 00:00:00.309][0] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
212<6>[ 0.312365 / 01-01 00:00:00.309][0] pm8994_s3: 1300 mV normal idle
213<6>[ 0.312827 / 01-01 00:00:00.309][0] pm8994_s4: 1800 mV normal idle
214<6>[ 0.313299 / 01-01 00:00:00.309][0] pm8994_s5: 2150 mV normal idle
215<6>[ 0.313748 / 01-01 00:00:00.309][0] pm8994_s7: 800 mV normal idle
216<6>[ 0.314216 / 01-01 00:00:00.309][0] pm8994_l1: 1000 mV normal idle
217<6>[ 0.314702 / 01-01 00:00:00.309][0] pm8994_l2: 1250 mV normal idle
218<6>[ 0.315498 / 01-01 00:00:00.309][0] pm8994_l3: 1050 mV normal idle
219<6>[ 0.315989 / 01-01 00:00:00.309][0] pm8994_l4: 1225 mV normal idle
220<6>[ 0.316460 / 01-01 00:00:00.309][0] pm8994_l6: 1200 mV normal idle
221<6>[ 0.316924 / 01-01 00:00:00.309][0] pm8994_l8: 1800 mV normal idle
222<6>[ 0.317403 / 01-01 00:00:00.309][0] pm8994_l9: 1800 mV normal idle
223<6>[ 0.317854 / 01-01 00:00:00.309][0] pm8994_l10: 1800 mV normal idle
224<6>[ 0.318325 / 01-01 00:00:00.309][0] pm8994_l11: 1200 mV normal idle
225<6>[ 0.318798 / 01-01 00:00:00.309][0] pm8994_l12: 1800 mV normal idle
226<6>[ 0.319715 / 01-01 00:00:00.309][0] pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
227<6>[ 0.320262 / 01-01 00:00:00.319][0] pm8994_l14: 1800 mV normal idle
228<6>[ 0.321140 / 01-01 00:00:00.319][0] pm8994_l15: 1800 mV normal idle
229<6>[ 0.321630 / 01-01 00:00:00.319][0] pm8994_l16: 2700 mV normal idle
230<6>[ 0.322086 / 01-01 00:00:00.319][0] pm8994_l17: 2800 mV normal idle
231<6>[ 0.322900 / 01-01 00:00:00.319][0] pm8994_l18: 2200 mV normal idle
232<6>[ 0.323339 / 01-01 00:00:00.319][0] pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
233<6>[ 0.323817 / 01-01 00:00:00.319][0] pm8994_l19: 3000 mV normal idle
234<6>[ 0.324285 / 01-01 00:00:00.319][0] pm8994_l20: 2950 mV normal idle
235<6>[ 0.324750 / 01-01 00:00:00.319][0] pm8994_l21: 2950 mV normal idle
236<6>[ 0.325585 / 01-01 00:00:00.319][0] pm8994_l22: 3300 mV normal idle
237<6>[ 0.326086 / 01-01 00:00:00.319][0] pm8994_l23: 2800 mV normal idle
238<6>[ 0.326564 / 01-01 00:00:00.319][0] pm8994_l24: 3075 mV normal idle
239<6>[ 0.327020 / 01-01 00:00:00.319][0] pm8994_l25: 1200 mV normal idle
240<6>[ 0.327843 / 01-01 00:00:00.319][0] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
241<6>[ 0.328289 / 01-01 00:00:00.319][0] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
242<6>[ 0.328741 / 01-01 00:00:00.319][0] pm8994_l27: 1000 mV normal idle
243<6>[ 0.329216 / 01-01 00:00:00.319][0] pm8994_l28: 925 mV normal idle
244<6>[ 0.330004 / 01-01 00:00:00.319][0] pm8994_l29: 2800 mV normal idle
245<6>[ 0.330551 / 01-01 00:00:00.329][0] pm8994_l30: 1800 mV normal idle
246<6>[ 0.331009 / 01-01 00:00:00.329][0] pm8994_l32: 1800 mV normal idle
247<6>[ 0.331478 / 01-01 00:00:00.329][0] pm8994_lvs1: no parameters
248<6>[ 0.331890 / 01-01 00:00:00.329][0] pm8994_lvs2: no parameters
249<6>[ 0.332312 / 01-01 00:00:00.329][0] pmi8994_s1: 1025 mV normal idle
250<6>[ 0.332783 / 01-01 00:00:00.329][0] pmi8994_boost_5v: no parameters
251<3>[ 0.332958 / 01-01 00:00:00.329][0] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
252<3>[ 0.333067 / 01-01 00:00:00.329][0] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
253<6>[ 0.333416 / 01-01 00:00:00.329][0] pmi8994_boost_pin_ctrl: no parameters
254<3>[ 0.333505 / 01-01 00:00:00.329][0] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
255<3>[ 0.333599 / 01-01 00:00:00.329][0] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
256<6>[ 0.334002 / 01-01 00:00:00.329][0] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
257<6>[ 0.334373 / 01-01 00:00:00.329][0] pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
258<6>[ 0.334613 / 01-01 00:00:00.329][0] pm8994_s11_avs_limit: 470 <--> 1140 mV
259<6>[ 0.334739 / 01-01 00:00:00.329][0] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
260<6>[ 0.335902 / 01-01 00:00:00.329][0] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
261<6>[ 0.335939 / 01-01 00:00:00.329][0] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
262<6>[ 0.336381 / 01-01 00:00:00.329][0] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
263<3>[ 0.336404 / 01-01 00:00:00.329][0] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
264<6>[ 0.336423 / 01-01 00:00:00.329][0] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
265<3>[ 0.336438 / 01-01 00:00:00.329][0] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
266<3>[ 0.336993 / 01-01 00:00:00.329][0] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
267<6>[ 0.337474 / 01-01 00:00:00.329][0] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
268<3>[ 0.337576 / 01-01 00:00:00.329][0] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
269<3>[ 0.337594 / 01-01 00:00:00.329][0] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
270<6>[ 0.338210 / 01-01 00:00:00.329][0] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
271<3>[ 0.338309 / 01-01 00:00:00.329][0] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
272<3>[ 0.338326 / 01-01 00:00:00.329][0] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
273<6>[ 0.338973 / 01-01 00:00:00.329][0] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
274<3>[ 0.339071 / 01-01 00:00:00.329][0] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
275<3>[ 0.339088 / 01-01 00:00:00.329][0] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
276<6>[ 0.339687 / 01-01 00:00:00.329][0] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
277<3>[ 0.339800 / 01-01 00:00:00.329][0] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
278<3>[ 0.339817 / 01-01 00:00:00.329][0] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
279<3>[ 0.340350 / 01-01 00:00:00.339][0] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
280<6>[ 0.360268 / 01-01 00:00:00.349][0] gcc_mss_q6_bimc_axi_clk
281<6>[ 0.360299 / 01-01 00:00:00.349][0] CBCR: 0x80000001
282<4>[ 0.360312 / 01-01 00:00:00.349][0] ------------[ cut here ]------------
283<4>[ 0.360336 / 01-01 00:00:00.349][0] WARNING: CPU: 0 PID: 6 at ../drivers/clk/msm/clock-local2.c:671 branch_clk_halt_check+0x100/0x12c()
284<4>[ 0.360349 / 01-01 00:00:00.349][0] gcc_mss_q6_bimc_axi_clk: status stuck off
285<4>[ 0.360364 / 01-01 00:00:00.349][0] CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 3.18.31-twrp-h918-1.0 #1
286<4>[ 0.360379 / 01-01 00:00:00.349][0] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP (DT)
287<4>[ 0.360399 / 01-01 00:00:00.349][0] Workqueue: deferwq deferred_probe_work_func
288<0>[ 0.360413 / 01-01 00:00:00.349][0] Call trace:
289<4>[ 0.360433 / 01-01 00:00:00.349][0] [<ffffffc0000886c0>] dump_backtrace+0x0/0xf0
290<4>[ 0.360448 / 01-01 00:00:00.349][0] [<ffffffc0000887c4>] show_stack+0x14/0x1c
291<4>[ 0.360465 / 01-01 00:00:00.349][0] [<ffffffc000ccc31c>] dump_stack+0x84/0xac
292<4>[ 0.360482 / 01-01 00:00:00.349][0] [<ffffffc00009f304>] warn_slowpath_common+0x8c/0xb8
293<4>[ 0.360496 / 01-01 00:00:00.349][0] [<ffffffc00009f3a0>] warn_slowpath_fmt+0x44/0x4c
294<4>[ 0.360510 / 01-01 00:00:00.349][0] [<ffffffc0009dc728>] branch_clk_halt_check+0x100/0x12c
295<4>[ 0.360522 / 01-01 00:00:00.349][0] [<ffffffc0009de0fc>] branch_clk_enable+0x100/0x118
296<4>[ 0.360540 / 01-01 00:00:00.349][0] [<ffffffc0009d899c>] clk_enable+0x130/0x1a0
297<4>[ 0.360554 / 01-01 00:00:00.349][0] [<ffffffc0009d9484>] __handoff_clk+0x294/0x2e8
298<4>[ 0.360568 / 01-01 00:00:00.349][0] [<ffffffc0009d9ca8>] msm_clock_register+0x1f0/0x22c
299<4>[ 0.360582 / 01-01 00:00:00.349][0] [<ffffffc0009d9d64>] of_msm_clock_register+0x80/0x90
300<4>[ 0.360599 / 01-01 00:00:00.349][0] [<ffffffc0009e95ac>] msm_gcc_8996_probe+0x390/0x39c
301<4>[ 0.360613 / 01-01 00:00:00.349][0] [<ffffffc0004f8dc8>] platform_drv_probe+0x38/0x88
302<4>[ 0.360626 / 01-01 00:00:00.349][0] [<ffffffc0004f777c>] driver_probe_device+0x2c0/0x384
303<4>[ 0.360638 / 01-01 00:00:00.349][0] [<ffffffc0004f786c>] __device_attach+0x2c/0x4c
304<4>[ 0.360653 / 01-01 00:00:00.349][0] [<ffffffc0004f6200>] bus_for_each_drv+0x88/0x90
305<4>[ 0.360665 / 01-01 00:00:00.349][0] [<ffffffc0004f79a4>] device_attach+0x88/0x9c
306<4>[ 0.360679 / 01-01 00:00:00.349][0] [<ffffffc0004f639c>] bus_probe_device+0x2c/0xa0
307<4>[ 0.360694 / 01-01 00:00:00.349][0] [<ffffffc0004f6fbc>] deferred_probe_work_func+0x84/0x98
308<4>[ 0.360711 / 01-01 00:00:00.349][0] [<ffffffc0000b34ac>] process_one_work+0x234/0x410
309<4>[ 0.360725 / 01-01 00:00:00.349][0] [<ffffffc0000b399c>] worker_thread+0x2d8/0x394
310<4>[ 0.360740 / 01-01 00:00:00.349][0] [<ffffffc0000b81e0>] kthread+0xdc/0xe4
311<4>[ 0.360768 / 01-01 00:00:00.349][0] ---[ end trace 5681698c8fdfed25 ]---
312<6>[ 0.360997 / 01-01 00:00:00.359][0] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
313<6>[ 0.362075 / 01-01 00:00:00.359][0] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
314<6>[ 0.362102 / 01-01 00:00:00.359][0] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
315<6>[ 0.362118 / 01-01 00:00:00.359][0] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
316<6>[ 0.362481 / 01-01 00:00:00.359][0] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
317<6>[ 0.362501 / 01-01 00:00:00.359][0] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
318<6>[ 0.362517 / 01-01 00:00:00.359][0] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
319<6>[ 0.362893 / 01-01 00:00:00.359][0] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
320<6>[ 0.362915 / 01-01 00:00:00.359][0] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
321<6>[ 0.362930 / 01-01 00:00:00.359][0] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
322<6>[ 0.372610 / 01-01 00:00:00.369][0] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
323<6>[ 0.374683 / 01-01 00:00:00.369][0] pmi8994_boost_5v: no parameters
324<3>[ 0.374859 / 01-01 00:00:00.369][0] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
325<3>[ 0.374963 / 01-01 00:00:00.369][0] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
326<6>[ 0.375198 / 01-01 00:00:00.369][0] pmi8994_boost_pin_ctrl: no parameters
327<3>[ 0.375273 / 01-01 00:00:00.369][0] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
328<3>[ 0.375366 / 01-01 00:00:00.369][0] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
329<6>[ 0.376456 / 01-01 00:00:00.369][0] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
330<6>[ 0.376493 / 01-01 00:00:00.369][0] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
331<6>[ 0.376765 / 01-01 00:00:00.369][0] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
332<3>[ 0.376783 / 01-01 00:00:00.369][0] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
333<6>[ 0.376802 / 01-01 00:00:00.369][0] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
334<3>[ 0.376818 / 01-01 00:00:00.369][0] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
335<6>[ 0.377468 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
336<6>[ 0.377490 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
337<6>[ 0.377506 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
338<6>[ 0.377520 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
339<6>[ 0.377534 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
340<6>[ 0.377550 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
341<6>[ 0.377799 / 01-01 00:00:00.369][0] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
342<6>[ 0.378044 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 605000 uV
343<6>[ 0.378060 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 705000 uV
344<6>[ 0.378073 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 815000 uV
345<6>[ 0.378086 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 970000 uV
346<6>[ 0.378220 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 346
347<6>[ 0.378236 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 528, quot_offset[ 7]= 140
348<6>[ 0.378250 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 749, quot_offset[ 7]= 220
349<6>[ 0.378264 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]=1026, quot_offset[ 7]= 275
350<6>[ 0.378449 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
351<6>[ 0.378463 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
352<6>[ 0.378476 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
353<6>[ 0.378489 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
354<6>[ 0.378503 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
355<6>[ 0.378518 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
356<6>[ 0.378692 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 605000 uV
357<6>[ 0.378705 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 705000 uV
358<6>[ 0.378718 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 815000 uV
359<6>[ 0.378731 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 970000 uV
360<6>[ 0.378793 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 346
361<6>[ 0.378807 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 528, quot_offset[ 7]= 140
362<6>[ 0.378820 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 749, quot_offset[ 7]= 220
363<6>[ 0.378834 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]=1026, quot_offset[ 7]= 275
364<6>[ 0.378982 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
365<6>[ 0.378997 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
366<6>[ 0.379010 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
367<6>[ 0.379024 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
368<6>[ 0.379038 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
369<6>[ 0.379053 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
370<6>[ 0.379301 / 01-01 00:00:00.369][0] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
371<6>[ 0.379607 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 595000 uV
372<6>[ 0.379622 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 685000 uV
373<6>[ 0.379636 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 745000 uV
374<6>[ 0.379649 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop=1010000 uV
375<6>[ 0.379823 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 329
376<6>[ 0.379839 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 489, quot_offset[ 7]= 120
377<6>[ 0.379853 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 611, quot_offset[ 7]= 120
378<6>[ 0.379867 / 01-01 00:00:00.369][0] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1087, quot_offset[ 7]= 475
379<6>[ 0.380521 / 01-01 00:00:00.379][0] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
380<6>[ 0.380682 / 01-01 00:00:00.379][0] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
381<6>[ 0.380917 / 01-01 00:00:00.379][0] apc0_cbf_corner: 0 <--> 0 mV at 0 mV
382<6>[ 0.384227 / 01-01 00:00:00.379][0] cpr3_regulator_measure_aging: apcc: average quotient delta=13 (count=10)
383<6>[ 0.384267 / 01-01 00:00:00.379][0] cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=1562 uV
384<6>[ 0.384771 / 01-01 00:00:00.379][0] apc1_corner: 0 <--> 0 mV at 0 mV
385<6>[ 0.386522 / 01-01 00:00:00.379][1] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
386<6>[ 0.386549 / 01-01 00:00:00.379][1] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
387<6>[ 0.386830 / 01-01 00:00:00.379][1] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 640000 uV
388<6>[ 0.386845 / 01-01 00:00:00.379][1] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 685000 uV
389<6>[ 0.386858 / 01-01 00:00:00.379][1] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 805000 uV
390<6>[ 0.386870 / 01-01 00:00:00.379][1] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 895000 uV
391<6>[ 0.387052 / 01-01 00:00:00.379][1] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
392<6>[ 0.387211 / 01-01 00:00:00.379][1] gfx_corner: 0 <--> 0 mV at 0 mV
393<6>[ 0.388747 / 01-01 00:00:00.379][1] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
394<3>[ 0.388870 / 01-01 00:00:00.379][1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
395<6>[ 0.388885 / 01-01 00:00:00.379][1] i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
396<6>[ 0.390276 / 01-01 00:00:00.389][1] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
397<3>[ 0.390422 / 01-01 00:00:00.389][1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
398<6>[ 0.390438 / 01-01 00:00:00.389][1] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
399<6>[ 0.391695 / 01-01 00:00:00.389][1] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
400<3>[ 0.391824 / 01-01 00:00:00.389][1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
401<6>[ 0.391840 / 01-01 00:00:00.389][1] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
402<6>[ 0.392778 / 01-01 00:00:00.389][1] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
403<3>[ 0.392916 / 01-01 00:00:00.389][1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
404<6>[ 0.392931 / 01-01 00:00:00.389][1] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
405<6>[ 0.394466 / 01-01 00:00:00.389][1] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
406<6>[ 0.396759 / 01-01 00:00:00.389][0] clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu0
407<6>[ 0.396816 / 01-01 00:00:00.389][0] clock-cpu-8996: set OPP pair (1593600000 Hz, 945000 uv) on cpu0
408<6>[ 0.396840 / 01-01 00:00:00.389][0] clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu1
409<6>[ 0.396878 / 01-01 00:00:00.389][0] clock-cpu-8996: set OPP pair (1593600000 Hz, 945000 uv) on cpu1
410<6>[ 0.396901 / 01-01 00:00:00.389][0] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu2
411<6>[ 0.396986 / 01-01 00:00:00.389][0] clock-cpu-8996: set OPP pair (2150400000 Hz, 995000 uv) on cpu2
412<6>[ 0.397011 / 01-01 00:00:00.389][0] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu3
413<6>[ 0.397066 / 01-01 00:00:00.389][0] clock-cpu-8996: set OPP pair (2150400000 Hz, 995000 uv) on cpu3
414<6>[ 0.397218 / 01-01 00:00:00.389][0] clock-cpu-8996: set OPP pair (307200000 Hz, 650000 uv) on soc:qcom,m4m
415<6>[ 0.397266 / 01-01 00:00:00.389][0] clock-cpu-8996: set OPP pair (1593600000 Hz, 945000 uv) on soc:qcom,m4m
416<6>[ 0.397839 / 01-01 00:00:00.389][0] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
417<6>[ 0.398313 / 01-01 00:00:00.389][0] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 570000 uV) on b00000.qcom,kgsl-3d0
418<6>[ 0.398350 / 01-01 00:00:00.389][0] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 895000 uV) on b00000.qcom,kgsl-3d0
419<6>[ 0.399946 / 01-01 00:00:00.389][0] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
420<6>[ 0.400309 / 01-01 00:00:00.399][0] pmi8994_boost_5v: no parameters
421<3>[ 0.400440 / 01-01 00:00:00.399][0] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
422<3>[ 0.400545 / 01-01 00:00:00.399][0] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
423<6>[ 0.400791 / 01-01 00:00:00.399][0] pmi8994_boost_pin_ctrl: no parameters
424<3>[ 0.400866 / 01-01 00:00:00.399][0] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
425<3>[ 0.400958 / 01-01 00:00:00.399][0] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
426<6>[ 0.402001 / 01-01 00:00:00.399][0] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
427<6>[ 0.402036 / 01-01 00:00:00.399][0] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
428<6>[ 0.402397 / 01-01 00:00:00.399][0] msm_thermal:update_cpu_freq [CPU0] : max freq = 1190400
429<3>[ 0.402416 / 01-01 00:00:00.399][0] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
430<6>[ 0.402432 / 01-01 00:00:00.399][0] msm_thermal:update_cpu_freq [CPU2] : max freq = 0
431<3>[ 0.402444 / 01-01 00:00:00.399][0] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
432<6>[ 0.402459 / 01-01 00:00:00.399][0] msm_thermal:update_cpu_freq [CPU2] : max freq = 1190400
433<3>[ 0.402472 / 01-01 00:00:00.399][0] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
434<6>[ 0.403575 / 01-01 00:00:00.399][0] msm_thermal:update_cpu_freq [CPU0] : max freq = 1593600
435<3>[ 0.403621 / 01-01 00:00:00.399][0] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
436<6>[ 0.403638 / 01-01 00:00:00.399][0] msm_thermal:update_cpu_freq [CPU2] : max freq = 4294967295
437<3>[ 0.403651 / 01-01 00:00:00.399][0] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
438<6>[ 0.403667 / 01-01 00:00:00.399][0] msm_thermal:update_cpu_freq [CPU2] : max freq = 2150400
439<3>[ 0.403679 / 01-01 00:00:00.399][0] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
440<6>[ 0.403850 / 01-01 00:00:00.399][1] pmi8994_boost_5v: no parameters
441<3>[ 0.403987 / 01-01 00:00:00.399][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
442<3>[ 0.404090 / 01-01 00:00:00.399][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
443<6>[ 0.404323 / 01-01 00:00:00.399][1] pmi8994_boost_pin_ctrl: no parameters
444<3>[ 0.404410 / 01-01 00:00:00.399][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
445<3>[ 0.404503 / 01-01 00:00:00.399][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
446<6>[ 0.464750 / 01-01 00:00:00.459][3] KPI: Bootloader start count = 42758
447<6>[ 0.464773 / 01-01 00:00:00.459][3] KPI: Bootloader end count = 240218
448<6>[ 0.464786 / 01-01 00:00:00.459][3] KPI: Bootloader display count = 60303
449<6>[ 0.464798 / 01-01 00:00:00.459][3] KPI: Bootloader load kernel count = 5851
450<6>[ 0.464812 / 01-01 00:00:00.459][3] KPI: Kernel MPM timestamp = 265594
451<6>[ 0.464823 / 01-01 00:00:00.459][3] KPI: Kernel MPM Clock frequency = 32768
452<6>[ 0.464850 / 01-01 00:00:00.459][3] socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=12
453<6>[ 0.464850 / 01-01 00:00:00.459][3] accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=477453917 num_pmics=2
454<3>[ 0.464891 / 01-01 00:00:00.459][3] [LGE_POWER] lge power!!!
455<6>[ 0.465149 / 01-01 00:00:00.459][3] gdsc_mmagic_bimc: no parameters
456<6>[ 0.465936 / 01-01 00:00:00.459][3] usb_otg_vreg: no parameters
457<3>[ 0.466013 / 01-01 00:00:00.459][3] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
458<3>[ 0.466116 / 01-01 00:00:00.459][3] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
459<6>[ 0.466821 / 01-01 00:00:00.459][3] vgaarb: loaded
460<5>[ 0.468343 / 01-01 00:00:00.459][3] SCSI subsystem initialized
461<6>[ 0.469413 / 01-01 00:00:00.459][3] usbcore: registered new interface driver usbfs
462<6>[ 0.469463 / 01-01 00:00:00.459][3] usbcore: registered new interface driver hub
463<6>[ 0.469619 / 01-01 00:00:00.459][3] usbcore: registered new device driver usb
464<4>[ 0.470015 / 01-01 00:00:00.459][3] soc:usb_nop_phy supply vcc not found, using dummy regulator
465<6>[ 0.470760 / 01-01 00:00:00.469][3] media: Linux media interface: v0.10
466<6>[ 0.470814 / 01-01 00:00:00.469][3] Linux video capture interface: v2.00
467<6>[ 0.580546 / 01-01 00:00:00.579][3] cpufreq: driver msm up and running
468<6>[ 0.581159 / 01-01 00:00:00.579][3] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
469<6>[ 0.581331 / 01-01 00:00:00.579][3] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
470<6>[ 0.581474 / 01-01 00:00:00.579][3] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
471<6>[ 0.581720 / 01-01 00:00:00.579][3] ION heap system created
472<6>[ 0.581862 / 01-01 00:00:00.579][0] ION heap kmalloc created
473<6>[ 0.581884 / 01-01 00:00:00.579][0] ION heap adsp created at 0x00000000ff800000 with size 400000
474<6>[ 0.581898 / 01-01 00:00:00.579][0] ION heap qsecom created at 0x00000000fe400000 with size 1400000
475<6>[ 0.581911 / 01-01 00:00:00.579][0] ION heap secure_display created at 0x00000000f8800000 with size 5c00000
476<6>[ 0.581923 / 01-01 00:00:00.579][0] ION heap secure_heap created
477<3>[ 0.582890 / 01-01 00:00:00.579][0] msm_bus_fabric_init_driver
478<3>[ 0.587507 / 01-01 00:00:00.579][0] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
479<3>[ 0.587530 / 01-01 00:00:00.579][0] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
480<3>[ 0.591177 / 01-01 00:00:00.589][2] msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
481<3>[ 0.591640 / 01-01 00:00:00.589][2] msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
482<3>[ 0.597224 / 01-01 00:00:00.589][2] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
483<3>[ 0.597238 / 01-01 00:00:00.589][2] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
484<3>[ 0.597250 / 01-01 00:00:00.589][2] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
485<3>[ 0.597365 / 01-01 00:00:00.589][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
486<3>[ 0.597390 / 01-01 00:00:00.589][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
487<3>[ 0.597412 / 01-01 00:00:00.589][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
488<3>[ 0.597434 / 01-01 00:00:00.589][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
489<3>[ 0.597455 / 01-01 00:00:00.589][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
490<3>[ 0.597477 / 01-01 00:00:00.589][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
491<3>[ 0.597498 / 01-01 00:00:00.589][2] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
492<6>[ 0.598932 / 01-01 00:00:00.589][2] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
493<6>[ 0.598955 / 01-01 00:00:00.589][2] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
494<6>[ 0.599121 / 01-01 00:00:00.589][2] input: qpnp_pon as /devices/virtual/input/input0
495<6>[ 0.599540 / 01-01 00:00:00.589][2] pon_spare_reg: no parameters
496<6>[ 0.599603 / 01-01 00:00:00.589][2] qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
497<6>[ 0.599662 / 01-01 00:00:00.589][2] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from Hard Reset and 'warm' boot
498<6>[ 0.599678 / 01-01 00:00:00.589][2] qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
499<6>[ 0.599872 / 01-01 00:00:00.589][2] PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
500<6>[ 0.599957 / 01-01 00:00:00.589][2] PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
501<3>[ 0.601322 / 01-01 00:00:00.599][2] ipa ipa2_uc_state_check:296 uC interface not initialized
502<3>[ 0.601336 / 01-01 00:00:00.599][2] ipa ipa_sps_irq_control_all:937 EP (2) not allocated.
503<3>[ 0.601342 / 01-01 00:00:00.599][2] ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
504<6>[ 0.602965 / 01-01 00:00:00.599][3] sps:BAM 0x0000000000684000 is registered.
505<3>[ 0.603823 / 01-01 00:00:00.599][3] ipa ipa2_uc_state_check:296 uC interface not initialized
506<6>[ 0.604025 / 01-01 00:00:00.599][3] sps:BAM 0x0000000000684000 (va:0xffffff8000ec0000) enabled: ver:0x27, number of pipes:20
507<3>[ 0.605427 / 01-01 00:00:00.599][3] ipa ipa2_uc_state_check:296 uC interface not initialized
508<3>[ 0.613124 / 01-01 00:00:00.609][3] ipa ipa2_uc_state_check:296 uC interface not initialized
509<6>[ 0.614971 / 01-01 00:00:00.609][3] IPA driver initialization was successful.
510<6>[ 0.616419 / 01-01 00:00:00.609][3] gdsc_mmagic_video: no parameters
511<6>[ 0.616677 / 01-01 00:00:00.609][3] gdsc_mmagic_mdss: no parameters
512<6>[ 0.616868 / 01-01 00:00:00.609][3] gdsc_mmagic_camss: no parameters
513<6>[ 0.617123 / 01-01 00:00:00.609][3] gdsc_venus: no parameters
514<6>[ 0.617147 / 01-01 00:00:00.609][3] gdsc_venus: supplied by gdsc_mmagic_video
515<6>[ 0.617316 / 01-01 00:00:00.609][3] gdsc_venus_core0: fast normal
516<6>[ 0.617522 / 01-01 00:00:00.609][3] gdsc_venus_core1: fast normal
517<6>[ 0.617701 / 01-01 00:00:00.609][3] gdsc_camss_top: no parameters
518<6>[ 0.617721 / 01-01 00:00:00.609][3] gdsc_camss_top: supplied by gdsc_mmagic_camss
519<6>[ 0.617921 / 01-01 00:00:00.609][3] gdsc_vfe0: no parameters
520<6>[ 0.617940 / 01-01 00:00:00.609][3] gdsc_vfe0: supplied by gdsc_camss_top
521<6>[ 0.618124 / 01-01 00:00:00.609][3] gdsc_vfe1: no parameters
522<6>[ 0.618144 / 01-01 00:00:00.609][3] gdsc_vfe1: supplied by gdsc_camss_top
523<6>[ 0.618352 / 01-01 00:00:00.609][3] gdsc_mdss: no parameters
524<6>[ 0.618375 / 01-01 00:00:00.609][3] gdsc_mdss: supplied by gdsc_mmagic_mdss
525<6>[ 0.618672 / 01-01 00:00:00.609][3] gdsc_jpeg: no parameters
526<6>[ 0.618700 / 01-01 00:00:00.609][3] gdsc_jpeg: supplied by gdsc_camss_top
527<6>[ 0.618878 / 01-01 00:00:00.609][3] gdsc_cpp: no parameters
528<6>[ 0.618898 / 01-01 00:00:00.609][3] gdsc_cpp: supplied by gdsc_camss_top
529<6>[ 0.619075 / 01-01 00:00:00.609][3] gdsc_pcie_0: no parameters
530<6>[ 0.619213 / 01-01 00:00:00.609][3] gdsc_pcie_1: no parameters
531<6>[ 0.619386 / 01-01 00:00:00.609][3] gdsc_pcie_2: no parameters
532<6>[ 0.619528 / 01-01 00:00:00.609][3] gdsc_usb30: no parameters
533<6>[ 0.619686 / 01-01 00:00:00.609][3] gdsc_ufs: no parameters
534<6>[ 0.619890 / 01-01 00:00:00.609][3] gdsc_fd: no parameters
535<6>[ 0.619911 / 01-01 00:00:00.609][3] gdsc_fd: supplied by gdsc_camss_top
536<6>[ 0.620249 / 01-01 00:00:00.619][3] gdsc_gpu: no parameters
537<6>[ 0.620460 / 01-01 00:00:00.619][3] gdsc_gpu_gx: no parameters
538<6>[ 0.620833 / 01-01 00:00:00.619][3] gdsc_gpu_gx: supplied by gfx_corner
539<6>[ 0.621048 / 01-01 00:00:00.619][3] gdsc_hlos1_vote_aggre0_noc: no parameters
540<6>[ 0.621189 / 01-01 00:00:00.619][3] gdsc_hlos1_vote_lpass_adsp: no parameters
541<6>[ 0.621354 / 01-01 00:00:00.619][3] gdsc_hlos1_vote_lpass_core: no parameters
542<6>[ 0.621506 / 01-01 00:00:00.619][3] gdsc_aggre0_noc: no parameters
543<6>[ 0.623867 / 01-01 00:00:00.619][3] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
544<6>[ 0.623891 / 01-01 00:00:00.619][3] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
545<6>[ 0.625178 / 01-01 00:00:00.619][3] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
546<6>[ 0.625232 / 01-01 00:00:00.619][3] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
547<6>[ 0.625242 / 01-01 00:00:00.619][3] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
548<3>[ 0.626328 / 01-01 00:00:00.619][3] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
549<6>[ 0.626913 / 01-01 00:00:00.619][3] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
550<6>[ 0.626951 / 01-01 00:00:00.619][3] mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
551<3>[ 0.626962 / 01-01 00:00:00.619][3] mdss_pll_probe: Unable to get the cell-index rc=-22
552<6>[ 0.758427 / 01-01 00:00:00.749][3] Advanced Linux Sound Architecture Driver Initialized.
553<6>[ 0.759122 / 01-01 00:00:00.749][3] Bluetooth: ffffffc0f889bd30
554<6>[ 0.759214 / 01-01 00:00:00.749][3] NET: Registered protocol family 31
555<6>[ 0.759228 / 01-01 00:00:00.749][3] Bluetooth: ffffffc0f889bd30
556<6>[ 0.759240 / 01-01 00:00:00.749][3] Bluetooth: ffffffc0f889bd10Bluetooth: ffffffc0f889bcf0
557<6>[ 0.759280 / 01-01 00:00:00.749][3] Bluetooth: ffffffc0f889bcf0<6>[ 0.759767 / 01-01 00:00:00.749][3] cfg80211: Calling CRDA to update world regulatory domain
558<6>[ 0.759798 / 01-01 00:00:00.749][3] cfg80211: World regulatory domain updated:
559<6>[ 0.759809 / 01-01 00:00:00.749][3] cfg80211: DFS Master region: unset
560<6>[ 0.759816 / 01-01 00:00:00.749][3] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
561<6>[ 0.759831 / 01-01 00:00:00.749][3] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
562<6>[ 0.759841 / 01-01 00:00:00.749][3] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
563<6>[ 0.759851 / 01-01 00:00:00.749][3] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
564<6>[ 0.759860 / 01-01 00:00:00.749][3] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
565<6>[ 0.759868 / 01-01 00:00:00.749][3] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
566<6>[ 0.759876 / 01-01 00:00:00.749][3] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
567<6>[ 0.759884 / 01-01 00:00:00.749][3] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
568<6>[ 0.759891 / 01-01 00:00:00.749][3] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
569<1>[ 0.760164 / 01-01 00:00:00.759][2] pcie:pcie_init.
570<3>[ 0.760175 / 01-01 00:00:00.759][2] pcie_init: unable to create IPC log context for pcie0-short
571<3>[ 0.760184 / 01-01 00:00:00.759][2] pcie_init: unable to create IPC log context for pcie0-long
572<3>[ 0.760192 / 01-01 00:00:00.759][2] pcie_init: unable to create IPC log context for pcie0-dump
573<3>[ 0.760200 / 01-01 00:00:00.759][2] pcie_init: unable to create IPC log context for pcie1-short
574<3>[ 0.760208 / 01-01 00:00:00.759][2] pcie_init: unable to create IPC log context for pcie1-long
575<3>[ 0.760216 / 01-01 00:00:00.759][2] pcie_init: unable to create IPC log context for pcie1-dump
576<3>[ 0.760223 / 01-01 00:00:00.759][2] pcie_init: unable to create IPC log context for pcie2-short
577<3>[ 0.760230 / 01-01 00:00:00.759][2] pcie_init: unable to create IPC log context for pcie2-long
578<3>[ 0.760237 / 01-01 00:00:00.759][2] pcie_init: unable to create IPC log context for pcie2-dump
579<4>[ 0.762232 / 01-01 00:00:00.759][2] 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
580<3>[ 0.764893 / 01-01 00:00:00.759][2] msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
581<6>[ 0.767670 / 01-01 00:00:00.759][1] pmi8994_boost_5v: no parameters
582<6>[ 0.767966 / 01-01 00:00:00.759][1] pmi8994_boost_5v: supplied by pon_spare_reg
583<6>[ 0.768433 / 01-01 00:00:00.759][1] pmi8994_boost_pin_ctrl: no parameters
584<6>[ 0.768636 / 01-01 00:00:00.759][1] pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
585<3>[ 0.769079 / 01-01 00:00:00.759][1] register_qpnp_ibb_regulator: [Display] IBB soft start R is set for PMI8996
586<6>[ 0.769324 / 01-01 00:00:00.759][1] ibb_reg: 4600 <--> 6000 mV at 5500 mV
587<6>[ 0.769655 / 01-01 00:00:00.759][1] lab_reg: 4600 <--> 6000 mV at 5500 mV
588<6>[ 0.770641 / 01-01 00:00:00.769][1] usb_otg_vreg: no parameters
589<3>[ 0.770858 / 01-01 00:00:00.769][1] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
590<3>[ 0.770992 / 01-01 00:00:00.769][1] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
591<6>[ 0.771830 / 01-01 00:00:00.769][2] Switched to clocksource arch_sys_counter
592<6>[ 0.807223 / 01-01 00:00:00.799][2] [LGE-BATT-ID] lge_battery_id_probe : LG Battery ID probe Start~!!
593<6>[ 0.807259 / 01-01 00:00:00.799][2] [LGE-BATT-ID] lge_battery_id_probe : Battery info : 187
594<6>[ 0.807497 / 01-01 00:00:00.799][2] [LGE-BATT-ID] lge_battery_id_probe : LG Battery ID probe done~!!
595<6>[ 0.807850 / 01-01 00:00:00.799][2] lge_power_changed_work
596<6>[ 0.809276 / 01-01 00:00:00.799][2] [LGE-UEVENT] lge_uevent_probe : LG UEVENT probe Start~!!
597<6>[ 0.809417 / 01-01 00:00:00.799][2] [LGE-UEVENT] lge_uevent_probe : LG UEVENT probe done~!!
598<6>[ 0.809442 / 01-01 00:00:00.799][2] lge_power_changed_work
599<6>[ 0.810263 / 01-01 00:00:00.809][2] bcl_peripheral:bcl_perph_init BCL Initialized
600<6>[ 0.814843 / 01-01 00:00:00.809][3] NET: Registered protocol family 2
601<6>[ 0.815437 / 01-01 00:00:00.809][3] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
602<6>[ 0.815533 / 01-01 00:00:00.809][3] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
603<6>[ 0.815870 / 01-01 00:00:00.809][3] TCP: Hash tables configured (established 32768 bind 32768)
604<6>[ 0.816015 / 01-01 00:00:00.809][3] TCP: reno registered
605<6>[ 0.816035 / 01-01 00:00:00.809][3] UDP hash table entries: 2048 (order: 4, 65536 bytes)
606<6>[ 0.816062 / 01-01 00:00:00.809][3] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
607<6>[ 0.816416 / 01-01 00:00:00.809][3] NET: Registered protocol family 1
608<7>[ 0.816485 / 01-01 00:00:00.809][3] PCI: CLS 0 bytes, default 128
609<6>[ 0.817433 / 01-01 00:00:00.809][1] usb_otg_vreg: no parameters
610<3>[ 0.817576 / 01-01 00:00:00.809][1] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
611<3>[ 0.817676 / 01-01 00:00:00.809][1] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
612<6>[ 0.818203 / 01-01 00:00:00.809][3] Trying to unpack rootfs image as initramfs...
613<6>[ 0.959801 / 01-01 00:00:00.949][3] Freeing initrd memory: 6712K (ffffffc002200000 - ffffffc00288e000)
614<6>[ 0.962060 / 01-01 00:00:00.959][3] kryo perfevents: CPU pmu for kryo-pmuv3 detected
615<6>[ 0.967679 / 01-01 00:00:00.959][3] futex hash table entries: 1024 (order: 5, 131072 bytes)
616<5>[ 0.967817 / 01-01 00:00:00.959][3] Initialise system trusted keyring
617<6>[ 0.967912 / 01-01 00:00:00.959][3] audit: initializing netlink subsys (disabled)
618<5>[ 0.968030 / 01-01 00:00:00.959][3] audit: type=2000 audit(0.959:1): initialized
619<4>[ 0.973262 / 01-01 00:00:00.969][3] vmscan: error setting kswapd cpu affinity mask
620<6>[ 0.976927 / 01-01 00:00:00.969][3] exFAT: Core Version 1.2.23
621<6>[ 0.976950 / 01-01 00:00:00.969][3] exFAT: FS Version 1.2.23
622<6>[ 0.977303 / 01-01 00:00:00.969][3] Registering sdcardfs 2.1.3-2
623<6>[ 0.977394 / 01-01 00:00:00.969][3] fuse init (API version 7.23)
624<7>[ 0.977704 / 01-01 00:00:00.969][3] SELinux: Registering netfilter hooks
625<5>[ 0.979822 / 01-01 00:00:00.969][3] Key type asymmetric registered
626<5>[ 0.979841 / 01-01 00:00:00.969][3] Asymmetric key parser 'x509' registered
627<6>[ 0.979982 / 01-01 00:00:00.969][3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
628<6>[ 0.980002 / 01-01 00:00:00.969][3] io scheduler noop registered (default)
629<6>[ 0.990645 / 01-01 00:00:00.989][3] [LCD][LM3697] lm3697_probe: i2c probe start
630<6>[ 0.990978 / 01-01 00:00:00.989][3] [LM3697] lm3697_parse_dt gpio: 1015, max_current: 19, min: 1, default: 46, max: 255, output_config: 4, brightness_config: 0, sink_feedback: 0, boost_ctrl: 4, pwm : 0
631<6>[ 0.990987 / 01-01 00:00:00.989][3] [LCD][LM3697] lm3697_probe: gpio = 1015
632<3>[ 0.991961 / 01-01 00:00:00.989][3] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
633<3>[ 0.993252 / 01-01 00:00:00.989][3] No change in context(0==0), skip
634<6>[ 0.994437 / 01-01 00:00:00.989][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
635<6>[ 0.994446 / 01-01 00:00:00.989][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
636<6>[ 0.994453 / 01-01 00:00:00.989][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
637<6>[ 0.994460 / 01-01 00:00:00.989][3] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
638<6>[ 0.994483 / 01-01 00:00:00.989][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
639<6>[ 0.994490 / 01-01 00:00:00.989][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
640<6>[ 0.994497 / 01-01 00:00:00.989][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
641<6>[ 0.994504 / 01-01 00:00:00.989][3] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
642<6>[ 0.994521 / 01-01 00:00:00.989][3] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
643<6>[ 0.994528 / 01-01 00:00:00.989][3] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
644<6>[ 0.994544 / 01-01 00:00:00.989][3] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
645<6>[ 0.994550 / 01-01 00:00:00.989][3] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
646<3>[ 0.994561 / 01-01 00:00:00.989][3] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
647<3>[ 0.994632 / 01-01 00:00:00.989][3] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
648<6>[ 0.995013 / 01-01 00:00:00.989][3] xlog_status: enable:1, panic:0, dump:2
649<3>[ 0.995231 / 01-01 00:00:00.989][3] OF: no ranges; cannot translate
650<3>[ 0.995246 / 01-01 00:00:00.989][3] OF: no ranges; cannot translate
651<3>[ 0.995884 / 01-01 00:00:00.989][3] OF: no ranges; cannot translate
652<3>[ 0.995897 / 01-01 00:00:00.989][3] OF: no ranges; cannot translate
653<3>[ 0.996028 / 01-01 00:00:00.989][3] OF: no ranges; cannot translate
654<3>[ 0.996038 / 01-01 00:00:00.989][3] OF: no ranges; cannot translate
655<3>[ 0.996158 / 01-01 00:00:00.989][3] OF: no ranges; cannot translate
656<3>[ 0.996169 / 01-01 00:00:00.989][3] OF: no ranges; cannot translate
657<6>[ 0.996339 / 01-01 00:00:00.989][3] mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00000100
658<6>[ 1.001867 / 01-01 00:00:00.999][3] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
659<6>[ 1.002044 / 01-01 00:00:00.999][3] mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
660<6>[ 1.002166 / 01-01 00:00:00.999][3] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
661<6>[ 1.002285 / 01-01 00:00:00.999][3] mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
662<6>[ 1.005171 / 01-01 00:00:00.999][3] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
663<6>[ 1.005671 / 01-01 00:00:00.999][3] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_sw49407_dsc_qhd_cmd:config1:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_sw49407_dsc_qhd_cmd
664<6>[ 1.005689 / 01-01 00:00:00.999][3] mdss_dsi_panel_init: Panel Name = SW49407 cmd mode dsc dsi panel
665<3>[ 1.005698 / 01-01 00:00:00.999][3] mdss_dsi_panel_init: panel_type is LGD_SW49407_CMD_DSC_PANEL
666<6>[ 1.005705 / 01-01 00:00:00.999][3] panel_type is 4
667<6>[ 1.005746 / 01-01 00:00:00.999][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap
668<6>[ 1.005757 / 01-01 00:00:00.999][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-hl
669<6>[ 1.005768 / 01-01 00:00:00.999][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex
670<6>[ 1.005777 / 01-01 00:00:00.999][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-dim
671<6>[ 1.005785 / 01-01 00:00:00.999][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-hl
672<6>[ 1.005794 / 01-01 00:00:00.999][3] lge_mdss_panel_parse_dt_blmaps: found lge,blmap-ex-dim-hl
673<6>[ 1.005867 / 01-01 00:00:00.999][3] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_sw49407_dsc_qhd_cmd" (ffffffc0f889b230)
674<3>[ 1.005887 / 01-01 00:00:00.999][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-vcom-command
675<3>[ 1.005919 / 01-01 00:00:00.999][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cabc-20-command
676<3>[ 1.005928 / 01-01 00:00:00.999][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cabc-30-command
677<3>[ 1.005936 / 01-01 00:00:00.999][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
678<3>[ 1.005945 / 01-01 00:00:00.999][3] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
679<6>[ 1.005956 / 01-01 00:00:00.999][3] mdss_dsi_parse_topology_config: cfg_node name config1 lm_split:720x720 pp_split:no
680<6>[ 1.006047 / 01-01 00:00:00.999][3] mdss_dsi_parse_panel_features: partial_update_enabled=1
681<6>[ 1.006059 / 01-01 00:00:00.999][3] mdss_dsi_parse_panel_features: ulps feature enabled
682<6>[ 1.006067 / 01-01 00:00:00.999][3] mdss_dsi_parse_panel_features: ulps during suspend feature enabled
683<6>[ 1.006076 / 01-01 00:00:00.999][3] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
684<6>[ 1.006138 / 01-01 00:00:00.999][3] [AOD] init start
685<6>[ 1.006254 / 01-01 00:00:00.999][3] mdss_panel_parse_blex_settings: Configured BL_OTHERS bkltex ctrl
686<3>[ 1.006707 / 01-01 00:00:00.999][3] no supply entry present: lge,extra-supply-entries
687<3>[ 1.006734 / 01-01 00:00:00.999][3] mdss_dsi_parse_ctrl_params:3988 Unable to read qcom,display-id, data= (null),len=20
688<6>[ 1.006770 / 01-01 00:00:00.999][3] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
689<6>[ 1.006812 / 01-01 00:00:00.999][3] lge_mdss_dsi_parse_gpio_params: num_gpios=2
690<3>[ 1.006881 / 01-01 00:00:00.999][3] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
691<3>[ 1.006903 / 01-01 00:00:00.999][3] mdss_dsi_retrieve_ctrl_resources+0x168/0x1c4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
692<6>[ 1.006911 / 01-01 00:00:00.999][3] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800198a000 ctrl_size=400 phy_base=ffffff800198c400 phy_size=588
693<6>[ 1.007088 / 01-01 00:00:00.999][3] dsi_panel_device_register: Continuous splash enabled
694<6>[ 1.007702 / 01-01 00:00:00.999][3] mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
695<3>[ 1.008091 / 01-01 00:00:00.999][3] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=0 req_power_state=1
696<6>[ 1.008706 / 01-01 00:00:00.999][3] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
697<3>[ 1.008901 / 01-01 00:00:00.999][3] mdss_dsi_ctrl 996000.qcom,mdss_dsi_ctrl1: mdss_dsi_ctrl_probe: Cell-index not specified, rc=-22
698<4>[ 1.008921 / 01-01 00:00:00.999][3] mdss_dsi_ctrl: probe of 996000.qcom,mdss_dsi_ctrl1 failed with error -22
699<6>[ 1.010422 / 01-01 00:00:01.009][3] mdss_dsi_status_init: DSI status check interval:5000
700<3>[ 1.011433 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_data: id=0
701<3>[ 1.011443 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_HPD_PM'
702<3>[ 1.011453 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_gpio_data: no gpio
703<3>[ 1.011459 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_DDC_PM'
704<3>[ 1.011465 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_gpio_data: no gpio
705<3>[ 1.011471 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CORE_PM'
706<3>[ 1.011476 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_gpio_data: no gpio
707<3>[ 1.011482 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CEC_PM'
708<3>[ 1.011487 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_gpio_data: no gpio
709<3>[ 1.011493 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_HPD_PM'
710<3>[ 1.011509 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_vreg_data: hpd-gdsc min=0, max=0, enable=0 disable=0
711<3>[ 1.011515 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_DDC_PM'
712<3>[ 1.011521 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_vreg_data: no vreg
713<3>[ 1.011526 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CORE_PM'
714<3>[ 1.011533 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_vreg_data: no vreg
715<3>[ 1.011538 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CEC_PM'
716<3>[ 1.011544 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_vreg_data: no vreg
717<3>[ 1.011549 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_HPD_PM'
718<3>[ 1.011556 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_DDC_PM'
719<3>[ 1.011561 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_clk_data: no clk
720<3>[ 1.011567 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CORE_PM'
721<3>[ 1.011573 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CEC_PM'
722<3>[ 1.011578 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_clk_data: no clk
723<3>[ 1.011589 / 01-01 00:00:01.009][3] hdmi_tx_get_dt_data:4581 Unable to read qcom,display-id, data= (null),len=0
724<6>[ 1.012121 / 01-01 00:00:01.009][3] hdmi_tx_init_resource: 'core_physical': start = 0xffffff8001990000, len=0x50c
725<6>[ 1.012134 / 01-01 00:00:01.009][3] hdmi_tx_init_resource: 'qfprom_physical': start = 0xffffff8001998000, len=0x6158
726<6>[ 1.012224 / 01-01 00:00:01.009][3] hdmi_tx_init_resource: 'hdcp_physical': start = 0xffffff8001992000, len=0xfff
727<3>[ 1.012548 / 01-01 00:00:01.009][3] hdmi_tx_check_capability: Features <HDMI:ON, HDCP:ON>
728<6>[ 1.013222 / 01-01 00:00:01.009][3] mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
729<3>[ 1.013654 / 01-01 00:00:01.009][3] hdmi_tx_probe: Add child devices.
730<6>[ 1.015408 / 01-01 00:00:01.009][3] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
731<3>[ 1.017229 / 01-01 00:00:01.009][3] [MDSS] lge_cd_lpc is not yet ready
732<3>[ 1.017261 / 01-01 00:00:01.009][3] [MDSS] cable 8
733<6>[ 1.017270 / 01-01 00:00:01.009][3] lge,blmap: br_lvl(127) -> bl_lvl(561)
734<6>[ 1.017280 / 01-01 00:00:01.009][3] mdss_fb_probe: fb0: split_mode:1 left:720 right:720
735<6>[ 1.017874 / 01-01 00:00:01.009][3] mdss_fb_register: FrameBuffer[0] 1440x2720 registered successfully!
736<3>[ 1.018246 / 01-01 00:00:01.009][3] mdss_mdp_splash_parse_dt: splash mem child node is not present
737<3>[ 1.018255 / 01-01 00:00:01.009][3] mdss_mdp_splash_parse_dt: no rsvd mem found in DT for splash screen
738<3>[ 1.018261 / 01-01 00:00:01.009][3] mdss_mdp_splash_init: splash memory reserve failed
739<6>[ 1.018276 / 01-01 00:00:01.009][3] vts_register_value_sensor: Register value sensor [led] : weight = 0
740<6>[ 1.018283 / 01-01 00:00:01.009][3] vts_register_value_sensor: Register value sensor [led_sensor] : weight = 1000
741<6>[ 1.018289 / 01-01 00:00:01.009][3] mdss_fb_probe: "led" virtual value sensor is registered.
742<6>[ 1.018329 / 01-01 00:00:01.009][3] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
743<6>[ 1.018391 / 01-01 00:00:01.009][3] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
744<3>[ 1.018432 / 01-01 00:00:01.009][3] hdmi_tx_event_handler: event = MDSS_EVENT_FB_REGISTERED suspend=0, hpd_feature=0
745<3>[ 1.018463 / 01-01 00:00:01.009][3] hdmi_tx_sysfs_create: sysfs group ffffffc075a3a410
746<3>[ 1.018471 / 01-01 00:00:01.009][3] hdmi_tx_init_panel: panel initialized
747<3>[ 1.018508 / 01-01 00:00:01.009][3] hdmi_tx_init_hdcp: HDCP 1.4 initialized
748<3>[ 1.018710 / 01-01 00:00:01.009][3] hdmi_tx_init_hdcp: HDCP 2.2 initialized
749<3>[ 1.018754 / 01-01 00:00:01.009][3] hdmi_tx_init_audio: audio initialized
750<6>[ 1.023658 / 01-01 00:00:01.019][3] mdss_fb_probe: fb2: split_mode:0 left:0 right:0
751<6>[ 1.023811 / 01-01 00:00:01.019][3] mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
752<3>[ 1.023923 / 01-01 00:00:01.019][3] mdss_mdp_splash_parse_dt: splash mem child node is not present
753<3>[ 1.027499 / 01-01 00:00:01.019][3] glink_loopback_server_init: unable to create log context
754<3>[ 1.027669 / 01-01 00:00:01.019][3] msm_smp2p_init: unable to create log context
755<3>[ 1.030287 / 01-01 00:00:01.029][3] qmi_log_init: Unable to create QMI IPC logging for Req/Resp
756<3>[ 1.030308 / 01-01 00:00:01.029][3] logging for Indications: Unable to create QMI IPC qmi_log_init<3>[ 1.033371 / 01-01 00:00:01.029][3] apr_init: Unable to create ipc log context
757<6>[ 1.041315 / 01-01 00:00:01.039][3] l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
758<5>[ 1.042281 / 01-01 00:00:01.039][3] msm_rpm_log_probe: OK
759<6>[ 1.045762 / 01-01 00:00:01.039][3] subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
760<6>[ 1.046556 / 01-01 00:00:01.039][3] subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
761<4>[ 1.049276 / 01-01 00:00:01.039][3] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
762<6>[ 1.051848 / 01-01 00:00:01.049][3] bootlog_probe: start 0x32d5
763<6>[ 1.051870 / 01-01 00:00:01.049][3] bootlog_probe: size 0x1fff4
764<6>[ 1.051877 / 01-01 00:00:01.049][3] -------------------------------------------------
765<6>[ 1.051883 / 01-01 00:00:01.049][3] below logs are got from bootloader
766<6>[ 1.051889 / 01-01 00:00:01.049][3] -------------------------------------------------
767<6>[ 1.051894 / 01-01 00:00:01.049][3]
768<6>[ 1.051953 / 01-01 00:00:01.049][3] B - 463203 - DPE_MEMC_STATUS_0: DDR0 0x0000FFFF, DDR1 0x0000FFFF
769<6>[ 1.051991 / 01-01 00:00:01.049][3] B - 463234 - ch 2, cs 1, mr8 0x08080808
770<6>[ 1.052049 / 01-01 00:00:01.049][3] B - 463234 - DPE_MEMC_STATUS_0: DDR0 0x0000FFFF, DDR1 0x0000FFFF
771<6>[ 1.052122 / 01-01 00:00:01.049][3] B - 463478 - ddr_info: SKH ver=21914 ch=0x3 cs=0x3 rev1=0x4 rev2=0x0 mr8=0x8 hwrev=12
772<6>[ 1.052156 / 01-01 00:00:01.049][3] B - 463478 - ddr_trained[36c,0x3]
773<6>[ 1.052196 / 01-01 00:00:01.049][3] B - 463478 - ddr_initialize_device, Delta
774<6>[ 1.052245 / 01-01 00:00:01.049][3] B - 463508 - DDR ID, Rank 0, Rank 1, 0x6, 0x400, 0x400
775<6>[ 1.052281 / 01-01 00:00:01.049][3] B - 463569 - [DDR] remap_size: 4096MB
776<6>[ 1.052331 / 01-01 00:00:01.049][3] B - 463569 - [DDR] remap_info CS0: 0x80000000, CS1: 0x0
777<6>[ 1.052365 / 01-01 00:00:01.049][3] B - 463691 - Basic DDR tests done
778<6>[ 1.052400 / 01-01 00:00:01.049][3] B - 519628 - boot_pre_longkey_check
779<6>[ 1.052436 / 01-01 00:00:01.049][3] B - 519628 - powerkey release state
780<6>[ 1.052467 / 01-01 00:00:01.049][3] B - 527558 - Image Load, Start
781<6>[ 1.052503 / 01-01 00:00:01.049][3] B - 527650 - bootLUN:1, currentLUN:1
782<6>[ 1.052542 / 01-01 00:00:01.049][3] B - 527650 - xbl is matched with bootLUN
783<6>[ 1.052592 / 01-01 00:00:01.049][3] D - 946 - LGE SBL Image Loaded, Delta - (51579 Bytes)
784<6>[ 1.052624 / 01-01 00:00:01.049][3] B - 528504 - clock_init, Start
785<6>[ 1.052656 / 01-01 00:00:01.049][3] B - 528839 - Image Load, Start
786<6>[ 1.052713 / 01-01 00:00:01.049][3] D - 3935 - QSEE Dev Config Image Loaded, Delta - (46200 Bytes)
787<6>[ 1.052744 / 01-01 00:00:01.049][3] B - 533170 - Image Load, Start
788<6>[ 1.052793 / 01-01 00:00:01.049][3] D - 2532 - APDP Image Loaded, Delta - (7768 Bytes)
789<6>[ 1.052824 / 01-01 00:00:01.049][3] B - 550464 - Image Load, Start
790<6>[ 1.052874 / 01-01 00:00:01.049][3] D - 55754 - QSEE Image Loaded, Delta - (1640904 Bytes)
791<6>[ 1.052906 / 01-01 00:00:01.049][3] B - 606218 - Image Load, Start
792<6>[ 1.052944 / 01-01 00:00:01.049][3] B - 606767 - QFPROM flag != QFPROMblown
793<6>[ 1.052991 / 01-01 00:00:01.049][3] D - 518 - SEC Image Loaded, Delta - (4116 Bytes)
794<6>[ 1.053032 / 01-01 00:00:01.049][3] B - 607346 - sbl1_efs_handle_cookies, Start
795<6>[ 1.053073 / 01-01 00:00:01.049][3] D - 91 - sbl1_efs_handle_cookies, Delta
796<6>[ 1.053105 / 01-01 00:00:01.049][3] B - 607438 - Image Load, Start
797<6>[ 1.053155 / 01-01 00:00:01.049][3] D - 12017 - QHEE Image Loaded, Delta - (254192 Bytes)
798<6>[ 1.053187 / 01-01 00:00:01.049][3] B - 619455 - Image Load, Start
799<6>[ 1.053235 / 01-01 00:00:01.049][3] D - 11071 - RPM Image Loaded, Delta - (223932 Bytes)
800<6>[ 1.053266 / 01-01 00:00:01.049][3] B - 630557 - Image Load, Start
801<6>[ 1.053311 / 01-01 00:00:01.049][3] D - 0 - STI Image Loaded, Delta - (0 Bytes)
802<6>[ 1.053341 / 01-01 00:00:01.049][3] B - 631350 - cable type is 8
803<6>[ 1.053395 / 01-01 00:00:01.049][3] B - 806359 - pm_app_smbchg: TA/USB attached, battery present
804<6>[ 1.053441 / 01-01 00:00:01.049][3] B - 806420 - Charger source: SDP before APSD rerun
805<6>[ 1.053490 / 01-01 00:00:01.049][3] B - 807274 - [ADC][mvol=1790][hw_rev_table[12]=[1700]
806<6>[ 1.053535 / 01-01 00:00:01.049][3] B - 815265 - [Display] SW49407_QHD_DSC_CMD_PANEL
807<6>[ 1.053570 / 01-01 00:00:01.049][3] B - 815295 - panel_type = CMD_PANEL
808<6>[ 1.053603 / 01-01 00:00:01.049][3] B - 822615 - Panel power on done
809<6>[ 1.053639 / 01-01 00:00:01.049][3] B - 822615 - soc_version:0x00030001
810<6>[ 1.053672 / 01-01 00:00:01.049][3] B - 867664 - Panel pre init done
811<6>[ 1.053735 / 01-01 00:00:01.049][3] [0] logbuf_relocate_sbl_log: log_start=0x85e11040, log_size=0x815, end_time=0
812<6>[ 1.053754 / 01-01 00:00:01.049][3] [0] welcome to lk
813<6>[ 1.053760 / 01-01 00:00:01.049][3]
814<6>[ 1.053780 / 01-01 00:00:01.049][3] [10] platform_init()
815<6>[ 1.053800 / 01-01 00:00:01.049][3] [10] target_init()
816<6>[ 1.053820 / 01-01 00:00:01.049][3] [10] RPM GLink Init
817<6>[ 1.053852 / 01-01 00:00:01.049][3] [10] Opening RPM Glink Port success
818<6>[ 1.053884 / 01-01 00:00:01.049][3] [10] Opening SSR Glink Port success
819<6>[ 1.053930 / 01-01 00:00:01.049][3] [10] Glink Connection between APPS and RPM established
820<6>[ 1.053976 / 01-01 00:00:01.049][3] [10] Glink Connection between APPS and RPM established
821<6>[ 1.054034 / 01-01 00:00:01.049][3] [20] bootmode_set_board_revision: board revision value is 12 from smem
822<6>[ 1.054063 / 01-01 00:00:01.049][3] [20] HW Rev(12), vol_up gpio(2)
823<6>[ 1.054085 / 01-01 00:00:01.049][3] [30] UFS init success
824<6>[ 1.054123 / 01-01 00:00:01.049][3] [70] SW3800_Authentication [vendor code: 1]
825<6>[ 1.054157 / 01-01 00:00:01.049][3] [110] set_dload_mode: download_mode:0
826<6>[ 1.054195 / 01-01 00:00:01.049][3] [120] [KSwitch] ftm kill switch item value=
827<6>[ 1.054258 / 01-01 00:00:01.049][3] [120] [KSwitch] (kswitch_load_flag): ftm kill switch item has invalid format
828<6>[ 1.054280 / 01-01 00:00:01.049][3] [120] batt_info = 187
829<6>[ 1.054336 / 01-01 00:00:01.049][3] [120] bootmode_set_cable: usb cable type/port type is 8/3 from smem
830<6>[ 1.054355 / 01-01 00:00:01.049][3] [120] get_qem = 0
831<6>[ 1.054396 / 01-01 00:00:01.049][3] [120] [emmc_one_binary] target partition updates
832<6>[ 1.054436 / 01-01 00:00:01.049][3] [120] [emmc_one_binary] userdata partition set
833<6>[ 1.054499 / 01-01 00:00:01.049][3] [120] [emmc_one_binary] card size 63677923328 Byte, card_sec_count 15546368
834<6>[ 1.054529 / 01-01 00:00:01.049][3] [150] PROTECTIVE_MBR_SIZE = 4096
835<6>[ 1.054567 / 01-01 00:00:01.049][3] [150] [emmc_one_binary] backup_lba 15546367
836<6>[ 1.054610 / 01-01 00:00:01.049][3] [150] [emmc_one_binary] Don't need to update GPT.
837<6>[ 1.054641 / 01-01 00:00:01.049][3] [150] Qseecom Init Done in Appsbl
838<6>[ 1.054745 / 01-01 00:00:01.049][3] [150] secure app region addr=0x86600000 size=0x1a00000[150] TZ App region notif returned with status:0 addr:86600000 size:27262976
839<6>[ 1.054810 / 01-01 00:00:01.049][3] [150] TZ App log region register returned with status:0 addr:9191d000 size:4096
840<6>[ 1.054843 / 01-01 00:00:01.049][3] [150] Qseecom TZ Init Done in Appsbl
841<6>[ 1.054868 / 01-01 00:00:01.049][3] [210] Loading cmnlib done
842<6>[ 1.054923 / 01-01 00:00:01.049][3] [210] qseecom_start_app: Loading app keymaster for the first time'
843<6>[ 1.054960 / 01-01 00:00:01.049][3] [240] <8>keymaster: "\"KEYMASTER Init \""
844<6>[ 1.055006 / 01-01 00:00:01.049][3] [240] GPIO 64 Drive stength set to 16mA and gpio_set
845<6>[ 1.055033 / 01-01 00:00:01.049][3] [240] LK SEC APP Handle: 0x1
846<6>[ 1.055080 / 01-01 00:00:01.049][3] [240] <8>keymaster: "\"open_add_km_partition status:0\""
847<6>[ 1.055108 / 01-01 00:00:01.049][3] [250] Device unlock statue 1
848<6>[ 1.055134 / 01-01 00:00:01.049][3] [250] Device unlock count 1
849<6>[ 1.055160 / 01-01 00:00:01.049][3] [250] Device flash count 0
850<6>[ 1.055180 / 01-01 00:00:01.049][3] [250] PIF_DETECT:8
851<6>[ 1.055212 / 01-01 00:00:01.049][3] [250] [Display]backlight level: 793
852<6>[ 1.055232 / 01-01 00:00:01.049][3] [250] PIF_DETECT:8
853<6>[ 1.055265 / 01-01 00:00:01.049][3] [250] [Display]backlight level: 189
854<6>[ 1.055307 / 01-01 00:00:01.049][3] [250] [Display]panel name: sw49407_qhd_dsc_cmd
855<6>[ 1.055337 / 01-01 00:00:01.049][3] [260] [Display]vddio_en_gpio : 69
856<6>[ 1.055373 / 01-01 00:00:01.049][3] [260] oem.panel D : sw49407_qhd_dsc_cmd
857<6>[ 1.055412 / 01-01 00:00:01.049][3] [260] OEM panel override:sw49407_qhd_dsc_cmd
858<6>[ 1.055468 / 01-01 00:00:01.049][3] [260] topology config-1 not supported. fallback to default config1
859<6>[ 1.055496 / 01-01 00:00:01.049][3] [260] panel_operating_mode=0x2
860<6>[ 1.055530 / 01-01 00:00:01.049][3] [260] Return value from recv_data: 14
861<6>[ 1.055563 / 01-01 00:00:01.049][3] [270] Return value from recv_data: 14
862<6>[ 1.055595 / 01-01 00:00:01.049][3] [290] [Display] IBB REVISION4 is 1
863<6>[ 1.055635 / 01-01 00:00:01.049][3] [330] msm_display_init: chargerlogo mode check
864<6>[ 1.055671 / 01-01 00:00:01.049][3] [330] pm8x41_get_is_cold_boot: Warm boot
865<6>[ 1.055720 / 01-01 00:00:01.049][3] [330] target_check_chargerlogo_mode: chargerlogo mode check
866<6>[ 1.055785 / 01-01 00:00:01.049][3] [330] target_check_chargerlogo_mode: cold_boot=0, pon1=33, key=0, cable_type=8
867<6>[ 1.055805 / 01-01 00:00:01.049][3] [390] lglogo_image.
868<6>[ 1.055832 / 01-01 00:00:01.049][3] [390] Config MIPI_CMD_PANEL.
869<6>[ 1.055860 / 01-01 00:00:01.049][3] [530] Turn on MIPI_CMD_PANEL.
870<6>[ 1.055887 / 01-01 00:00:01.049][3] [530] Configure GPIO success
871<6>[ 1.055930 / 01-01 00:00:01.049][3] [540] [Display][lm3697] read reg[0x21] level = 189
872<6>[ 1.055960 / 01-01 00:00:01.049][3] [540] HW Rev(12), vol_up gpio(2)
873<6>[ 1.055999 / 01-01 00:00:01.049][3] [540] target_home_key: should be implemented
874<6>[ 1.056062 / 01-01 00:00:01.049][3] [540] selectmode_get_current_key_info: vol_up=0, vol_down=0, power=0, home=0
875<6>[ 1.056118 / 01-01 00:00:01.049][3] [540] selectmode_check_usb_cable: with usb cable. not factory cable
876<6>[ 1.056164 / 01-01 00:00:01.049][3] [540] target_selectmode_init: selectmode_get_mode()=0
877<6>[ 1.056180 / 01-01 00:00:01.049][3] [540] SM_NONE
878<6>[ 1.056203 / 01-01 00:00:01.049][3] [540] webdload status:0
879<6>[ 1.056229 / 01-01 00:00:01.049][3] [540] dload_reboot status:0
880<6>[ 1.056265 / 01-01 00:00:01.049][3] [540] pm8x41_get_is_cold_boot: Warm boot
881<6>[ 1.056288 / 01-01 00:00:01.049][3] [540] webdload status:0
882<6>[ 1.056321 / 01-01 00:00:01.049][3] [540] LGFTM_LAF_MID_REBOOT_FLAG is 0
883<6>[ 1.056378 / 01-01 00:00:01.049][3] [540] bootcmd_add_pair: value changed from to LG-H918 at model.name
884<6>[ 1.056432 / 01-01 00:00:01.049][3] [540] bootcmd_add_pair: value changed from to rev_10 at lge.rev
885<6>[ 1.056491 / 01-01 00:00:01.049][3] [540] bootcmd_add_pair: value changed from to 400MA at bootcable.type
886<6>[ 1.056550 / 01-01 00:00:01.049][3] [540] bootcmd_add_pair: value changed from to SW3800_VC0 at lge.battid
887<6>[ 1.056604 / 01-01 00:00:01.049][3] [540] bootmode_set_ddr_info: DDR Size info 4294967296 from smem
888<6>[ 1.056650 / 01-01 00:00:01.049][3] [540] bootmode_set_ddr_info: DDR MR info 0x6 from smem
889<6>[ 1.056691 / 01-01 00:00:01.049][3] [540] [CCAudit] Start-up BOOT MODE = recovery
890<6>[ 1.056751 / 01-01 00:00:01.049][3] [540] bootcmd_add_pair: value changed from to recovery at lge.bootreason
891<6>[ 1.056817 / 01-01 00:00:01.049][3] [540] bootcmd_add_pair: value changed from to 0x77665502 at lge.bootreasoncode
892<6>[ 1.056840 / 01-01 00:00:01.049][3] [540] MSM8996 ver : 0x3
893<6>[ 1.056871 / 01-01 00:00:01.049][3] [540] UFS FORCE Reset count : 0x0
894<6>[ 1.056889 / 01-01 00:00:01.049][3] [540] get_qem = 0
895<6>[ 1.056908 / 01-01 00:00:01.049][3] [540] get_qem = 0
896<6>[ 1.056962 / 01-01 00:00:01.049][3] [540] bootmode_set_factory: put cable_type(8) and qem(0) to smem
897<6>[ 1.057000 / 01-01 00:00:01.049][3] [540] CHARGERLOGO: reboot_mode = 0x77665502
898<6>[ 1.057047 / 01-01 00:00:01.049][3] [540] CHARGERLOGO: boot_into_chargerlogo = 0 (Recovery)
899<6>[ 1.057067 / 01-01 00:00:01.049][3] [540] is_update_gpt
900<6>[ 1.057090 / 01-01 00:00:01.049][3] [540] is_update_gpt: 0
901<6>[ 1.057118 / 01-01 00:00:01.049][3] [540] [LAF] boot_into_laf = 0
902<6>[ 1.057157 / 01-01 00:00:01.049][3] [540] Unable to locate /bootselect partition
903<6>[ 1.057193 / 01-01 00:00:01.049][3] [540] [KSwitch] check kill switch feature
904<6>[ 1.057245 / 01-01 00:00:01.049][3] [540] [KSwitch] check done (do nothing): valid=true, flasg=0x0
905<6>[ 1.057268 / 01-01 00:00:01.049][3] [540] now sniffing = 0
906<6>[ 1.057288 / 01-01 00:00:01.049][3] [540] cc mode 0!!!
907<6>[ 1.057338 / 01-01 00:00:01.049][3] [540] bootcmd_add_pair: value changed from to 0 at cc_mode
908<6>[ 1.057367 / 01-01 00:00:01.049][3] [540] get_encrypt_on_minios = 0
909<6>[ 1.057395 / 01-01 00:00:01.049][3] [540] get_encrypt_on_minios = 0
910<6>[ 1.057426 / 01-01 00:00:01.049][3] [540] LGE_DMS - CRC = 0 STAGE= 0
911<6>[ 1.057457 / 01-01 00:00:01.049][3] [540] boot from recovery partition
912<6>[ 1.057482 / 01-01 00:00:01.049][3] [540] Device is unlocked!
913<6>[ 1.057523 / 01-01 00:00:01.049][3] [540] Loading (recovery) image (25030656): start
914<6>[ 1.057565 / 01-01 00:00:01.049][3] [720] Loading (recovery) image (25030656): done
915<6>[ 1.057612 / 01-01 00:00:01.049][3] [720] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
916<6>[ 1.057659 / 01-01 00:00:01.049][3] [720] Authenticating /recovery image (25030656): start
917<6>[ 1.057704 / 01-01 00:00:01.049][3] [720] boot_verifier: Device is in ORANGE boot state.
918<6>[ 1.057746 / 01-01 00:00:01.049][3] [720] boot_verifier: Skipping boot verification.
919<6>[ 1.057790 / 01-01 00:00:01.049][3] [720] boot_verifier: Device is in ORANGE boot state.
920<6>[ 1.057836 / 01-01 00:00:01.049][3] [720] Authenticating boot image: done return value = 0
921<6>[ 1.057879 / 01-01 00:00:01.049][3] [720] [CCAudit] Authenticating boot image: Success
922<6>[ 1.057940 / 01-01 00:00:01.049][3] [720] partition size, image size, round size : 4194304, 4060036, 4063232
923<6>[ 1.057968 / 01-01 00:00:01.049][3] [760] Raw resources verified.
924<6>[ 1.058029 / 01-01 00:00:01.049][3] [760] display_boot_state : verifiedboot_orange_01, verifiedboot_orange_02,
925<6>[ 1.058075 / 01-01 00:00:01.049][3] [800] read_image_info_from_emmc: total_image_num (53)
926<6>[ 1.058125 / 01-01 00:00:01.049][3] [800] get_image_info: Finding image verifiedboot_orange_01
927<6>[ 1.058174 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[0].name quick_lglogo_image
928<6>[ 1.058223 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[1].name load_charger_image
929<6>[ 1.058281 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[2].name battery_insert_nt_module_image
930<6>[ 1.058325 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[3].name NT_TYPE_CM1
931<6>[ 1.058368 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[4].name NT_TYPE_CM2
932<6>[ 1.058412 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[5].name NT_TYPE_CM3
933<6>[ 1.058460 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[6].name NT_TYPE_ERROR_MAX
934<6>[ 1.058507 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[7].name NT_TYPE_ERROR_MIN
935<6>[ 1.058558 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[8].name NT_TYPE_ERROR_UNKNOWN
936<6>[ 1.058607 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[9].name NT_TYPE_EU_AUSTRALIA
937<6>[ 1.058656 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[10].name NT_TYPE_EU_GLOBAL
938<6>[ 1.058701 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[11].name NT_TYPE_HM1
939<6>[ 1.058745 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[12].name NT_TYPE_HM2
940<6>[ 1.058793 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[13].name NT_TYPE_JP_KDDI
941<6>[ 1.058839 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[14].name NT_TYPE_KR_KT
942<6>[ 1.058886 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[15].name NT_TYPE_KR_LGU
943<6>[ 1.058932 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[16].name NT_TYPE_KR_SKT
944<6>[ 1.058979 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[17].name NT_TYPE_NA_ATT
945<6>[ 1.059025 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[18].name NT_TYPE_NA_SPR
946<6>[ 1.059072 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[19].name NT_TYPE_NA_TMUS
947<6>[ 1.059118 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[20].name NT_TYPE_NA_VZW
948<6>[ 1.059167 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[21].name NT_TYPE_RESERVED1
949<6>[ 1.059215 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[22].name NT_TYPE_RESERVED2
950<6>[ 1.059260 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[23].name downloadmode
951<6>[ 1.059310 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[24].name factory_reset_image
952<6>[ 1.059367 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[25].name factory_reset_1st_line_image
953<6>[ 1.059423 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[26].name factory_reset_2nd_line_image
954<6>[ 1.059479 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[27].name factory_reset_no_1st_image
955<6>[ 1.059535 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[28].name factory_reset_yes_1st_image
956<6>[ 1.059590 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[29].name factory_reset_no_2nd_image
957<6>[ 1.059646 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[30].name factory_reset_yes_2nd_image
958<6>[ 1.059693 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[31].name kswitch_factory
959<6>[ 1.059739 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[32].name kswitch_dload
960<6>[ 1.059794 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[33].name system_recovery_menu_image
961<6>[ 1.059853 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[34].name system_recovery_continue_image
962<6>[ 1.059912 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[35].name system_recovery_wipecache_image
963<6>[ 1.059973 / 01-01 00:00:01.049][3] [800] get_image_info: img_info[36].name system_recovery_factoryreset_image
964<6>[ 1.060032 / 01-01 00:00:01.059][3] [800] get_image_info: img_info[37].name system_recovery_powerdown_image
965<6>[ 1.060156 / 01-01 00:00:01.059][3] [800] get_image_info: img_info[38].name system_recovery_safemode_image
966<6>[ 1.060214 / 01-01 00:00:01.059][3] [800] get_image_info: img_info[39].name system_recovery_usbmode_image
967<6>[ 1.060270 / 01-01 00:00:01.059][3] [800] get_image_info: img_info[40].name LGE_PM_NO_BATTERY_QUESTION
968<6>[ 1.060324 / 01-01 00:00:01.059][3] [800] get_image_info: img_info[41].name LGE_PM_NO_BATTERY_EMPTY
969<6>[ 1.060373 / 01-01 00:00:01.059][3] [800] get_image_info: img_info[42].name LGE_PM_NO_CHARGER
970<6>[ 1.060426 / 01-01 00:00:01.059][3] [800] get_image_info: img_info[43].name LGE_PM_WEAK_CHARGING_ON
971<6>[ 1.060474 / 01-01 00:00:01.059][3] [800] get_image_info: img_info[44].name imei_main_image
972<6>[ 1.060522 / 01-01 00:00:01.059][3] [800] get_image_info: img_info[45].name imei_guide_image
973<6>[ 1.060569 / 01-01 00:00:01.059][3] [800] get_image_info: img_info[46].name system_errlogo
974<6>[ 1.060619 / 01-01 00:00:01.059][3] [800] get_image_info: img_info[47].name verifiedboot_red_01
975<6>[ 1.060670 / 01-01 00:00:01.059][3] [800] get_image_info: img_info[48].name verifiedboot_red_02
976<6>[ 1.060721 / 01-01 00:00:01.059][3] [800] get_image_info: img_info[49].name verifiedboot_orange_01
977<6>[ 1.060774 / 01-01 00:00:01.059][3] [860] display_boot_state: decompress time:0 key rel:0 paused:0
978<6>[ 1.060801 / 01-01 00:00:01.059][3] [5950] LK SEC APP Handle: 0x1
979<6>[ 1.060835 / 01-01 00:00:01.059][3] [5950] Input digest : 0x00000001(36)
980<6>[ 1.060873 / 01-01 00:00:01.059][3] [5950] decompressing lz4 kernel image: start
981<6>[ 1.060908 / 01-01 00:00:01.059][3] [6000] decompressing kernel image: done
982<6>[ 1.060979 / 01-01 00:00:01.059][3] [6010] Best match DTB tags 246/00000c08/0x00000000/30001/20009/10013/0/0/92df7480/562bc
983<6>[ 1.061046 / 01-01 00:00:01.059][3] [6010] Using pmic info 0x20009/0x10013/0x0/0x0 for device 0x20009/0x10113/0x0/0x0
984<6>[ 1.061094 / 01-01 00:00:01.059][3] [6010] dm-verity mode switches to enforcing mode.(1,0,0)
985<6>[ 1.061124 / 01-01 00:00:01.059][3] [6010] => KSUT verifier enabled
986<6>[ 1.061157 / 01-01 00:00:01.059][3] [6010] ksut_global_msm8992 is loaded
987<6>[ 1.061178 / 01-01 00:00:01.059][3] [6010] No unlock key!
988<6>[ 1.061228 / 01-01 00:00:01.059][3] [6010] [CCAudit] Enter the boot_linux for kernel startup,,,
989<6>[ 1.061256 / 01-01 00:00:01.059][3] [6010] bootcmd: lge.rev=rev_10
990<6>[ 1.061288 / 01-01 00:00:01.059][3] [6010] bootcmd: model.name=LG-H918
991<6>[ 1.061323 / 01-01 00:00:01.059][3] [6010] bootcmd: lge.bootreason=recovery
992<6>[ 1.061348 / 01-01 00:00:01.059][3] [6010] bootcmd: cc_mode=0
993<6>[ 1.061371 / 01-01 00:00:01.059][3] [6010] bootcmd: kswitch
994<6>[ 1.061411 / 01-01 00:00:01.059][3] [6010] bootcmd: lge.bootreasoncode=0x77665502
995<6>[ 1.061443 / 01-01 00:00:01.059][3] [6010] bootcmd: bootcable.type=400MA
996<6>[ 1.061477 / 01-01 00:00:01.059][3] [6010] bootcmd: lge.battid=SW3800_VC0
997<6>[ 1.061521 / 01-01 00:00:01.059][3] [6010] bootcmd: androidboot.bl_unlock_complete=true
998<6>[ 1.061557 / 01-01 00:00:01.059][3] [6010] bootcmd: androidboot.dlcomplete=0
999<6>[ 1.061598 / 01-01 00:00:01.059][3] [6010] bootcmd: androidboot.ddr_size=4294967296
1000<6>[ 1.061633 / 01-01 00:00:01.059][3] [6010] bootcmd: androidboot.ddr_info=0x6
1001<6>[ 1.061667 / 01-01 00:00:01.059][3] [6010] bootcmd: lge.crash_handler=off
1002<6>[ 1.061696 / 01-01 00:00:01.059][3] [6010] bootcmd: lge.hreset=off
1003<6>[ 1.061723 / 01-01 00:00:01.059][3] [6010] bootcmd: boot_cpus=0-3
1004<6>[ 1.061759 / 01-01 00:00:01.059][3] [6010] bootcmd: androidboot.revision=12
1005<6>[ 1.061793 / 01-01 00:00:01.059][3] [6010] bootcmd: lge.signed_image=false
1006<6>[ 1.061839 / 01-01 00:00:01.059][3] [6010] bootcmd: androidboot.verifiedbootstate=orange
1007<6>[ 1.061881 / 01-01 00:00:01.059][3] [6010] bootcmd: androidboot.veritymode=enforcing
1008<6>[ 1.061917 / 01-01 00:00:01.059][3] [6010] bootcmd: androidboot.rpmb_state=1
1009<6>[ 1.061953 / 01-01 00:00:01.059][3] [6010] pm8x41_get_is_cold_boot: Warm boot
1010<6>[ 1.062023 / 01-01 00:00:01.059][3] [6010] target_pause_for_battery_charge : pon_reason is 33 cold_boot:0 charger path: 4
1011<6>[ 1.062051 / 01-01 00:00:01.059][3] [6010] PON_PON_PBL_STATUS:0x0
1012<6>[ 1.062077 / 01-01 00:00:01.059][3] [6010] PON_PON_REASON1:0x21
1013<6>[ 1.062108 / 01-01 00:00:01.059][3] [6010] PON_WARM_RESET_REASON1:0x2
1014<6>[ 1.062139 / 01-01 00:00:01.059][3] [6010] PON_WARM_RESET_REASON2:0x0
1015<6>[ 1.062165 / 01-01 00:00:01.059][3] [6010] PON_POFF_REASON1:0x2
1016<6>[ 1.062192 / 01-01 00:00:01.059][3] [6010] PON_POFF_REASON2:0x0
1017<6>[ 1.062223 / 01-01 00:00:01.059][3] [6010] PON_SOFT_RESET_REASON1:0x0
1018<6>[ 1.062253 / 01-01 00:00:01.059][3] [6010] PON_SOFT_RESET_REASON2:0x0
1019<6>[ 1.062282 / 01-01 00:00:01.059][3] [6010] TEMP_ALARM_STATUS1:0x80
1020<6>[ 1.062317 / 01-01 00:00:01.059][3] [6010] SMBCHG_USB_CHGPTH_INT_RT_STS:0x4
1021<6>[ 1.062362 / 01-01 00:00:01.059][3] [6010] target_pause_for_battery_charge: normal boot
1022<6>[ 1.062399 / 01-01 00:00:01.059][3] [6010] oem.panel D : sw49407_qhd_dsc_cmd
1023<6>[ 1.062493 / 01-01 00:00:01.059][3] [6010] display kernel cmdline: mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_sw49407_dsc_qhd_cmd:config1:1:none:cfg:single_dsi
1024<6>[ 1.062530 / 01-01 00:00:01.059][3] [6010] pm8x41_get_is_cold_boot: Warm boot
1025<6>[ 1.062772 / 01-01 00:00:01.059][3] [6010] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff androidboot.hardware=elsa androidboot.bootdevice=624000.ufshc androidboot.selinux=permissive lge.rev=rev_10 model[6010] bootcmd_list_deinit : remove all bootcmd_arg
1026<6>[ 1.062804 / 01-01 00:00:01.059][3] [6010] Updating device tree: start
1027<6>[ 1.062834 / 01-01 00:00:01.059][3] [6020] Updating device tree: done
1028<6>[ 1.062871 / 01-01 00:00:01.059][3] [6020] oem.panel D : sw49407_qhd_dsc_cmd
1029<6>[ 1.062900 / 01-01 00:00:01.059][3] [6020] Turn off MIPI_CMD_PANEL.
1030<6>[ 1.062947 / 01-01 00:00:01.059][3] [6020] Continuous splash enabled, keeping panel alive.
1031<6>[ 1.062970 / 01-01 00:00:01.059][3] [6020] RPM GLINK UnInit
1032<6>[ 1.063004 / 01-01 00:00:01.059][3] [6020] Qseecom De-Init Done in Appsbl
1033<6>[ 1.063082 / 01-01 00:00:01.059][3] [6020] booting linux @ 0x80080000, ramdisk @ 0x82200000 (6876509), tags/device tree @ 0x82000000
1034<6>[ 1.063115 / 01-01 00:00:01.059][3] [6020] Jumping to kernel via monitor
1035<6>[ 1.063121 / 01-01 00:00:01.059][3]
1036<6>[ 1.063127 / 01-01 00:00:01.059][3] bootlog_probe: token (null)
1037<6>[ 1.063133 / 01-01 00:00:01.059][3] -------------------------------------------------
1038<4>[ 1.063145 / 01-01 00:00:01.059][3] Trying to free nonexistent resource <00000000c00c0000-00000000c00dffff>
1039<6>[ 1.064563 / 01-01 00:00:01.059][3] [UART CONSOLE][earjack_debugger_probe] disable uart console
1040<6>[ 1.064586 / 01-01 00:00:01.059][3] earjack debugger probed
1041<3>[ 1.067130 / 01-01 00:00:01.059][3] LGE GPIO debugger init done
1042<6>[ 1.067409 / 01-01 00:00:01.059][3] [QFUSE]lge_qfprom_probe : qfprom init
1043<3>[ 1.068401 / 01-01 00:00:01.059][3] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe starts!!!
1044<3>[ 1.068537 / 01-01 00:00:01.059][3] [LGE-ADC] lge_adc_qct_probe : Not yet initializing pm-vadc
1045<6>[ 1.069386 / 01-01 00:00:01.059][3] [LGE-CD] cable_detect_probe : lge_cable_detect probe start!
1046<3>[ 1.069427 / 01-01 00:00:01.059][3] [LGE-CD] cable_detect_probe : lge_adc property failed to get
1047<6>[ 1.070433 / 01-01 00:00:01.069][3] [LGE-CC] lge_charging_controller_probe : LG Charging controller probe done~!!
1048<6>[ 1.070462 / 01-01 00:00:01.069][3] lge_power_changed_work
1049<6>[ 1.071442 / 01-01 00:00:01.069][3] [LGE-HW_REV] lge_hw_rev_probe : Probe Start~!!
1050<6>[ 1.071456 / 01-01 00:00:01.069][3] [LGE-HW_REV] lge_hw_rev_probe : HW_REV : rev_10
1051<3>[ 1.071549 / 01-01 00:00:01.069][3] [LGE-HW_REV] lge_hw_rev_probe : Probe done~!!
1052<6>[ 1.071568 / 01-01 00:00:01.069][3] lge_power_changed_work
1053<6>[ 1.072446 / 01-01 00:00:01.069][3] [LGE-SM] lge_store_mode_probe : LG Store mode probe Start~!!
1054<6>[ 1.072540 / 01-01 00:00:01.069][3] [LGE-SM] lge_store_mode_probe : LG store mode probe done~!!
1055<6>[ 1.072559 / 01-01 00:00:01.069][3] lge_power_changed_work
1056<4>[ 1.072877 / 01-01 00:00:01.069][3] msm_serial_hs_init: error creating logging context
1057<3>[ 1.074713 / 01-01 00:00:01.069][3] sps: BAM device 0x0000000007544000 is not registered yet.
1058<6>[ 1.074745 / 01-01 00:00:01.069][3] sps:BAM 0x0000000007544000 is registered.
1059<6>[ 1.076016 / 01-01 00:00:01.069][3] 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 18, base_baud = 460800) is a MSM HS UART
1060<6>[ 1.078941 / 01-01 00:00:01.069][3] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
1061<3>[ 1.079005 / 01-01 00:00:01.069][3] AXI: get_pdata(): Error: Client name not found
1062<3>[ 1.079013 / 01-01 00:00:01.069][3] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
1063<3>[ 1.079019 / 01-01 00:00:01.069][3] msm_serial_hsl_probe: Bus scaling is disabled
1064<6>[ 1.079149 / 01-01 00:00:01.069][3] 75b0000.serial: ttyHSL0 at MMIO 0x75b0000 (irq = 12, base_baud = 460800) is a MSM
1065<6>[ 1.079241 / 01-01 00:00:01.069][3] msm_hsl_console_setup: console setup on port #0
1066<6>[ 1.081470 / 01-01 00:00:01.079][3] console [ttyHSL0] enabled
1067<6>[ 1.082406 / 01-01 00:00:01.079][3] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
1068<3>[ 1.082495 / 01-01 00:00:01.079][3] AXI: get_pdata(): Error: Client name not found
1069<3>[ 1.082502 / 01-01 00:00:01.079][3] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
1070<3>[ 1.082508 / 01-01 00:00:01.079][3] msm_serial_hsl_probe: Bus scaling is disabled
1071<6>[ 1.082607 / 01-01 00:00:01.079][3] 7574000.serial: ttyHSL1 at MMIO 0x7574000 (irq = 414, base_baud = 460800) is a MSM
1072<6>[ 1.083012 / 01-01 00:00:01.079][3] msm_serial_hsl_init: driver initialized
1073<3>[ 1.083036 / 01-01 00:00:01.079][3] smd_tty_log_init: Unable to create IPC log
1074<3>[ 1.087629 / 01-01 00:00:01.079][3] diag: Failed to create IPC logging context
1075<4>[ 1.093221 / 01-01 00:00:01.089][3] mts_tty_init success
1076<6>[ 1.093247 / 01-01 00:00:01.089][3] DM_APP: lge_dm_tty_init
1077<6>[ 1.093318 / 01-01 00:00:01.089][3] lge_bypass_init
1078<6>[ 1.093357 / 01-01 00:00:01.089][3] lge_bypass_init: success
1079<6>[ 1.107780 / 01-01 00:00:01.099][3] brd: module loaded
1080<6>[ 1.108976 / 01-01 00:00:01.099][3] loop: module loaded
1081<6>[ 1.109153 / 01-01 00:00:01.099][3] zram: Created 1 device(s)
1082<6>[ 1.110275 / 01-01 00:00:01.109][3] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
1083<4>[ 1.110325 / 01-01 00:00:01.109][3] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
1084<6>[ 1.110336 / 01-01 00:00:01.109][3] QSEECOM: qseecom_probe: no-clock-support=0x1<4>[ 1.110346 / 01-01 00:00:01.109][3] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
1085<6>[ 1.114164 / 01-01 00:00:01.109][3] IrRC: uei,reset-gpio: 995
1086<4>[ 1.114604 / 01-01 00:00:01.109][3] i2c-core: driver [tabla-i2c-core] using legacy suspend method
1087<4>[ 1.114611 / 01-01 00:00:01.109][3] i2c-core: driver [tabla-i2c-core] using legacy resume method
1088<4>[ 1.114665 / 01-01 00:00:01.109][3] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
1089<4>[ 1.114672 / 01-01 00:00:01.109][3] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
1090<4>[ 1.114725 / 01-01 00:00:01.109][3] i2c-core: driver [tasha-i2c-core] using legacy suspend method
1091<4>[ 1.114732 / 01-01 00:00:01.109][3] i2c-core: driver [tasha-i2c-core] using legacy resume method
1092<6>[ 1.116345 / 01-01 00:00:01.109][3] Loading PN547 driver
1093<6>[ 1.116441 / 01-01 00:00:01.109][1] pn547: Start async init
1094<6>[ 1.117581 / 01-01 00:00:01.109][1] pn547: pn547_probe() start
1095<6>[ 1.117820 / 01-01 00:00:01.109][1] pn547:IRQ : 9
1096<6>[ 1.117820 / 01-01 00:00:01.109][1] VEN : 12
1097<6>[ 1.117820 / 01-01 00:00:01.109][1] FIRM : 11
1098<6>[ 1.117972 / 01-01 00:00:01.109][1] pn547_probe : requesting IRQ 273
1099<6>[ 1.118096 / 01-01 00:00:01.109][1] pn547: pn547_probe() end
1100<6>[ 1.118143 / 01-01 00:00:01.109][1] pn547: Loading PN547 driver Success!
1101<6>[ 1.118679 / 01-01 00:00:01.109][3] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
1102<6>[ 1.118693 / 01-01 00:00:01.109][3] qce 660000.qcedev: CE device = 0x0
1103<6>[ 1.118693 / 01-01 00:00:01.109][3] , IO base, CE = 0xffffff8003a80000
1104<6>[ 1.118693 / 01-01 00:00:01.109][3] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
1105<6>[ 1.118693 / 01-01 00:00:01.109][3] IO base BAM = 0x (null)
1106<6>[ 1.118693 / 01-01 00:00:01.109][3] BAM IRQ 156
1107<6>[ 1.118693 / 01-01 00:00:01.109][3] Engines Availability = 0x2011053
1108<6>[ 1.118746 / 01-01 00:00:01.109][3] sps:BAM 0x0000000000644000 is registered.
1109<6>[ 1.118926 / 01-01 00:00:01.109][3] sps:BAM 0x0000000000644000 (va:0xffffff8003b00000) enabled: ver:0x27, number of pipes:16
1110<3>[ 1.118939 / 01-01 00:00:01.109][3] sps:BAM 0x0000000000644000 pipe 3 sharing violation
1111<3>[ 1.118947 / 01-01 00:00:01.109][3] sps:Failed to connect BAM 0xffffffc033fa7800 pipe 3
1112<3>[ 1.118957 / 01-01 00:00:01.109][3] QCE50: qce_sps_init_ep_conn: sps_connect() fail pipe_handle=0xffffffc033fa7c00, rc = -1
1113<3>[ 1.118979 / 01-01 00:00:01.109][3] sps:De-init client in connected state: 0x1535053
1114<4>[ 1.119030 / 01-01 00:00:01.109][3] qce: probe of 660000.qcedev failed with error -1
1115<6>[ 1.121256 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
1116<6>[ 1.121278 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: CE device = 0x0
1117<6>[ 1.121278 / 01-01 00:00:01.119][3] , IO base, CE = 0xffffff8003b40000
1118<6>[ 1.121278 / 01-01 00:00:01.119][3] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
1119<6>[ 1.121278 / 01-01 00:00:01.119][3] IO base BAM = 0x (null)
1120<6>[ 1.121278 / 01-01 00:00:01.119][3] BAM IRQ 156
1121<6>[ 1.121278 / 01-01 00:00:01.119][3] Engines Availability = 0x2011053
1122<6>[ 1.121326 / 01-01 00:00:01.119][3] sps:BAM 0x0000000000644000 is registered.
1123<6>[ 1.121489 / 01-01 00:00:01.119][3] sps:BAM 0x0000000000644000 (va:0xffffff8003bc0000) enabled: ver:0x27, number of pipes:16
1124<6>[ 1.121718 / 01-01 00:00:01.119][3] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 156
1125<6>[ 1.127746 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-ecb-aes
1126<6>[ 1.127897 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-cbc-aes
1127<6>[ 1.128044 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-ctr-aes
1128<6>[ 1.128121 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-ecb-des
1129<6>[ 1.128199 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-cbc-des
1130<6>[ 1.128277 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-ecb-3des
1131<6>[ 1.128352 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-cbc-3des
1132<6>[ 1.128428 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-xts-aes
1133<6>[ 1.128506 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-sha1
1134<6>[ 1.128582 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-sha256
1135<6>[ 1.128658 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
1136<6>[ 1.128731 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
1137<6>[ 1.128810 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
1138<6>[ 1.128889 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
1139<6>[ 1.128973 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
1140<6>[ 1.129054 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
1141<6>[ 1.129130 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-hmac-sha1
1142<6>[ 1.129208 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-hmac-sha256
1143<6>[ 1.129285 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-aes-ccm
1144<6>[ 1.129360 / 01-01 00:00:01.119][3] qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
1145<6>[ 1.132128 / 01-01 00:00:01.129][3] ICE IRQ = 26
1146<3>[ 1.132285 / 01-01 00:00:01.129][3] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
1147<6>[ 1.132337 / 01-01 00:00:01.129][3] ICE IRQ = 27
1148<6>[ 1.137542 / 01-01 00:00:01.129][3] qcom_ice_get_pdevice: found ice device ffffffc033f73c00
1149<6>[ 1.137568 / 01-01 00:00:01.129][3] qcom_ice_get_pdevice: matching platform device ffffffc0f8304400
1150<3>[ 1.138067 / 01-01 00:00:01.129][3] scm_call failed: func id 0x42000c02, arginfo: 0x2, args: 0x13, 0x0, 0x0, 0x0, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
1151<3>[ 1.138687 / 01-01 00:00:01.129][3] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
1152<3>[ 1.138698 / 01-01 00:00:01.129][3] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
1153<6>[ 1.139658 / 01-01 00:00:01.129][3] scsi host0: ufshcd
1154<6>[ 1.143314 / 01-01 00:00:01.139][3] qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8001ff0000
1155<6>[ 1.161901 / 01-01 00:00:01.159][3] SCSI Media Changer driver v0.25
1156<3>[ 1.165745 / 01-01 00:00:01.159][3] sps: BAM device 0x0000000007584000 is not registered yet.
1157<6>[ 1.165785 / 01-01 00:00:01.159][3] sps:BAM 0x0000000007584000 is registered.
1158<6>[ 1.167549 / 01-01 00:00:01.159][3] spi_master spi12: will run message pump with realtime priority
1159<6>[ 1.168805 / 01-01 00:00:01.159][3] sps:BAM 0x0000000007584000 (va:0xffffff8003c40000) enabled: ver:0x19, number of pipes:24
1160<6>[ 1.169697 / 01-01 00:00:01.159][3] tun: Universal TUN/TAP device driver, 1.6
1161<6>[ 1.169706 / 01-01 00:00:01.159][3] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
1162<6>[ 1.169768 / 01-01 00:00:01.159][3] PPP generic driver version 2.4.2
1163<6>[ 1.169847 / 01-01 00:00:01.159][3] PPP BSD Compression module registered
1164<6>[ 1.169858 / 01-01 00:00:01.159][3] PPP Deflate Compression module registered
1165<6>[ 1.169897 / 01-01 00:00:01.159][3] PPP MPPE Compression module registered
1166<6>[ 1.169909 / 01-01 00:00:01.159][3] NET: Registered protocol family 24
1167<3>[ 1.171572 / 01-01 00:00:01.169][3] dhd_init_wlan_mem: WIFI MEM Allocated
1168<6>[ 1.171590 / 01-01 00:00:01.169][3] bcm_wifi_init_mem successfully
1169<4>[ 1.171600 / 01-01 00:00:01.169][3] bcm_wifi_init_gpio: target does not use pinctrl for wifi reg on
1170<6>[ 1.171756 / 01-01 00:00:01.169][3] bcm_wifi_init_gpio: gpio_wlan_power=1011
1171<6>[ 1.171922 / 01-01 00:00:01.169][3] bcm_wifi_init_gpio: gpio_hostwake=73
1172<6>[ 1.190137 / 01-01 00:00:01.189][3] bcm_wifi_init_gpio successfully
1173<6>[ 1.190144 / 01-01 00:00:01.189][3] skip bcm_wifi_power up here
1174<6>[ 1.190727 / 01-01 00:00:01.189][3] usbcore: registered new interface driver catc
1175<6>[ 1.190737 / 01-01 00:00:01.189][3] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
1176<6>[ 1.190767 / 01-01 00:00:01.189][3] usbcore: registered new interface driver pegasus
1177<6>[ 1.190788 / 01-01 00:00:01.189][3] usbcore: registered new interface driver rtl8150
1178<6>[ 1.190810 / 01-01 00:00:01.189][3] usbcore: registered new interface driver r8152
1179<6>[ 1.190818 / 01-01 00:00:01.189][3] hso: ../drivers/net/usb/hso.c: Option Wireless
1180<6>[ 1.190856 / 01-01 00:00:01.189][3] usbcore: registered new interface driver hso
1181<6>[ 1.190879 / 01-01 00:00:01.189][3] usbcore: registered new interface driver asix
1182<6>[ 1.190901 / 01-01 00:00:01.189][3] usbcore: registered new interface driver ax88179_178a
1183<6>[ 1.190924 / 01-01 00:00:01.189][3] usbcore: registered new interface driver cdc_ether
1184<6>[ 1.190943 / 01-01 00:00:01.189][3] usbcore: registered new interface driver cdc_eem
1185<6>[ 1.190963 / 01-01 00:00:01.189][3] usbcore: registered new interface driver dm9601
1186<6>[ 1.190983 / 01-01 00:00:01.189][3] usbcore: registered new interface driver sr9700
1187<6>[ 1.191002 / 01-01 00:00:01.189][3] usbcore: registered new interface driver CoreChips
1188<6>[ 1.191025 / 01-01 00:00:01.189][3] usbcore: registered new interface driver smsc75xx
1189<6>[ 1.191045 / 01-01 00:00:01.189][3] usbcore: registered new interface driver smsc95xx
1190<6>[ 1.191065 / 01-01 00:00:01.189][3] usbcore: registered new interface driver gl620a
1191<6>[ 1.191086 / 01-01 00:00:01.189][3] usbcore: registered new interface driver net1080
1192<6>[ 1.191105 / 01-01 00:00:01.189][3] usbcore: registered new interface driver plusb
1193<6>[ 1.191125 / 01-01 00:00:01.189][3] usbcore: registered new interface driver rndis_host
1194<6>[ 1.191150 / 01-01 00:00:01.189][3] usbcore: registered new interface driver cdc_subset
1195<6>[ 1.191170 / 01-01 00:00:01.189][3] usbcore: registered new interface driver zaurus
1196<6>[ 1.191191 / 01-01 00:00:01.189][3] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
1197<6>[ 1.191352 / 01-01 00:00:01.189][3] usbcore: registered new interface driver int51x1
1198<6>[ 1.191373 / 01-01 00:00:01.189][3] usbcore: registered new interface driver kalmia
1199<6>[ 1.191396 / 01-01 00:00:01.189][3] usbcore: registered new interface driver ipheth
1200<6>[ 1.191415 / 01-01 00:00:01.189][3] usbcore: registered new interface driver sierra_net
1201<6>[ 1.191435 / 01-01 00:00:01.189][3] usbcore: registered new interface driver cx82310_eth
1202<6>[ 1.191455 / 01-01 00:00:01.189][3] usbcore: registered new interface driver cdc_ncm
1203<6>[ 1.191475 / 01-01 00:00:01.189][3] usbcore: registered new interface driver lg-vl600
1204<6>[ 1.191496 / 01-01 00:00:01.189][3] usbcore: registered new interface driver qmi_wwan
1205<6>[ 1.191519 / 01-01 00:00:01.189][3] usbcore: registered new interface driver cdc_mbim
1206<6>[ 1.192105 / 01-01 00:00:01.189][3] msm_sharedmem: sharedmem_register_qmi: qmi init successful
1207<6>[ 1.194717 / 01-01 00:00:01.189][2] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
1208<3>[ 1.202679 / 01-01 00:00:01.199][3] msm-dwc3 6a00000.ssusb: unable to get dbm device
1209<3>[ 1.203168 / 01-01 00:00:01.199][1] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
1210<6>[ 1.205825 / 01-01 00:00:01.199][3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1211<6>[ 1.205842 / 01-01 00:00:01.199][3] ehci-pci: EHCI PCI platform driver
1212<6>[ 1.205934 / 01-01 00:00:01.199][3] usbcore: registered new interface driver cdc_acm
1213<6>[ 1.205940 / 01-01 00:00:01.199][3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
1214<6>[ 1.205964 / 01-01 00:00:01.199][3] usbcore: registered new interface driver cdc_wdm
1215<6>[ 1.205987 / 01-01 00:00:01.199][3] usbcore: registered new interface driver uas
1216<6>[ 1.206013 / 01-01 00:00:01.199][3] usbcore: registered new interface driver usb-storage
1217<6>[ 1.206032 / 01-01 00:00:01.199][3] usbcore: registered new interface driver ums-alauda
1218<6>[ 1.206053 / 01-01 00:00:01.199][3] usbcore: registered new interface driver ums-cypress
1219<6>[ 1.206071 / 01-01 00:00:01.199][3] usbcore: registered new interface driver ums-datafab
1220<6>[ 1.206090 / 01-01 00:00:01.199][3] usbcore: registered new interface driver ums_eneub6250
1221<6>[ 1.206108 / 01-01 00:00:01.199][3] usbcore: registered new interface driver ums-freecom
1222<6>[ 1.206127 / 01-01 00:00:01.199][3] usbcore: registered new interface driver ums-isd200
1223<6>[ 1.206146 / 01-01 00:00:01.199][3] usbcore: registered new interface driver ums-jumpshot
1224<6>[ 1.206164 / 01-01 00:00:01.199][3] usbcore: registered new interface driver ums-karma
1225<6>[ 1.206182 / 01-01 00:00:01.199][3] usbcore: registered new interface driver ums-onetouch
1226<6>[ 1.206203 / 01-01 00:00:01.199][3] usbcore: registered new interface driver ums-realtek
1227<6>[ 1.206223 / 01-01 00:00:01.199][3] usbcore: registered new interface driver ums-sddr09
1228<6>[ 1.206241 / 01-01 00:00:01.199][3] usbcore: registered new interface driver ums-sddr55
1229<6>[ 1.206259 / 01-01 00:00:01.199][3] usbcore: registered new interface driver ums-usbat
1230<6>[ 1.206347 / 01-01 00:00:01.199][3] usbcore: registered new interface driver usbserial
1231<6>[ 1.206367 / 01-01 00:00:01.199][3] usbcore: registered new interface driver usbserial_generic
1232<6>[ 1.206386 / 01-01 00:00:01.199][3] usbserial: USB Serial support registered for generic
1233<6>[ 1.206408 / 01-01 00:00:01.199][3] usbcore: registered new interface driver ftdi_sio
1234<6>[ 1.206426 / 01-01 00:00:01.199][3] usbserial: USB Serial support registered for FTDI USB Serial Device
1235<6>[ 1.206445 / 01-01 00:00:01.199][3] usbcore: registered new interface driver pl2303
1236<6>[ 1.206462 / 01-01 00:00:01.199][3] usbserial: USB Serial support registered for pl2303
1237<6>[ 1.206484 / 01-01 00:00:01.199][3] usbcore: registered new interface driver usb_ehset_test
1238<3>[ 1.207213 / 01-01 00:00:01.199][3] anx7688-usbc 6-0028: usb supply not found, deferring probe
1239<6>[ 1.207958 / 01-01 00:00:01.199][3] gbridge_init: gbridge_init successs.
1240<6>[ 1.207970 / 01-01 00:00:01.199][3] u_lgeusb init
1241<6>[ 1.209181 / 01-01 00:00:01.199][3] mousedev: PS/2 mouse device common for all mice
1242<6>[ 1.209363 / 01-01 00:00:01.199][3] usbcore: registered new interface driver appletouch
1243<6>[ 1.209388 / 01-01 00:00:01.199][3] usbcore: registered new interface driver bcm5974
1244<6>[ 1.209411 / 01-01 00:00:01.199][3] usbcore: registered new interface driver synaptics_usb
1245<6>[ 1.209435 / 01-01 00:00:01.199][3] usbcore: registered new interface driver iforce
1246<6>[ 1.209459 / 01-01 00:00:01.199][3] usbcore: registered new interface driver xpad
1247<6>[ 1.209485 / 01-01 00:00:01.199][3] usbcore: registered new interface driver usb_acecad
1248<6>[ 1.209509 / 01-01 00:00:01.199][3] usbcore: registered new interface driver aiptek
1249<6>[ 1.209534 / 01-01 00:00:01.199][3] usbcore: registered new interface driver gtco
1250<6>[ 1.209557 / 01-01 00:00:01.199][3] usbcore: registered new interface driver hanwang
1251<6>[ 1.209580 / 01-01 00:00:01.199][3] usbcore: registered new interface driver kbtab
1252<6>[ 1.211040 / 01-01 00:00:01.209][3] [Touch] touch_device_init, sic4945 start
1253<6>[ 1.211092 / 01-01 00:00:01.209][3] [Touch] touch_device_init, sw49407 start
1254<6>[ 1.211714 / 01-01 00:00:01.209][3] [Touch] touch_spi_probe
1255<6>[ 1.211714 / 01-01 00:00:01.209][3] , platform ptr = (null)
1256<6>[ 1.211727 / 01-01 00:00:01.209][3] [Touch] touch_spi_probe : 25 Mhz, chip_select = 0
1257<6>[ 1.211734 / 01-01 00:00:01.209][3] [Touch] platform device register
1258<6>[ 1.212066 / 01-01 00:00:01.209][3] [Touch] start dev.of_node
1259<6>[ 1.212155 / 01-01 00:00:01.209][3] [Touch] fw_image - 0:touch/elsa/L1L57P1_1_07.img
1260<6>[ 1.212162 / 01-01 00:00:01.209][3] [Touch] fw_image - 1:touch/elsa/L1L57P1_1_07.img
1261<6>[ 1.212170 / 01-01 00:00:01.209][3] [Touch] end dev.of_node
1262<6>[ 1.212186 / 01-01 00:00:01.209][3] [Touch] touch_set_device, data:ffffffc0f55e0018
1263<6>[ 1.212193 / 01-01 00:00:01.209][3] [Touch] touch_gpio_init - pin:89, name:touch_reset
1264<6>[ 1.212209 / 01-01 00:00:01.209][3] [Touch] touch_gpio_direction_output - pin:89, value:0
1265<6>[ 1.212229 / 01-01 00:00:01.209][3] [Touch] touch_gpio_init - pin:125, name:touch_int
1266<6>[ 1.212239 / 01-01 00:00:01.209][3] [Touch] touch_gpio_direction_input - pin:125
1267<6>[ 1.212250 / 01-01 00:00:01.209][3] [Touch] touch_gpio_init - pin:-2, name:touch_make_id
1268<6>[ 1.212256 / 01-01 00:00:01.209][3] [Touch] touch_gpio_direction_input - pin:-2
1269<4>[ 1.212311 / 01-01 00:00:01.209][3] spi12.0 supply vdd not found, using dummy regulator
1270<4>[ 1.212394 / 01-01 00:00:01.209][3] spi12.0 supply vio not found, using dummy regulator
1271<6>[ 1.212750 / 01-01 00:00:01.209][3] [Touch] pinctrl set active
1272<6>[ 1.212972 / 01-01 00:00:01.209][3] [Touch] sw49407_power, off
1273<6>[ 1.212980 / 01-01 00:00:01.209][3] [Touch] touch_gpio_direction_output - pin:89, value:0
1274<6>[ 1.214029 / 01-01 00:00:01.209][3] [Touch] sw49407_power, on
1275<6>[ 1.214036 / 01-01 00:00:01.209][3] [Touch] touch_gpio_direction_output - pin:89, value:1
1276<6>[ 1.214132 / 01-01 00:00:01.209][3] [Touch] touch_init_input 1439-2719-255-1439-2719-90-10
1277<6>[ 1.214265 / 01-01 00:00:01.209][3] input: touch_dev as /devices/virtual/input/input1
1278<3>[ 1.214497 / 01-01 00:00:01.209][3] [Touch E] [sw49407_notify 1551] 3 is not supported
1279<6>[ 1.214669 / 01-01 00:00:01.209][3] [Touch] watch_fontdata_attr_init font_buffer(42 KB) malloc
1280<6>[ 1.214699 / 01-01 00:00:01.209][3] [Touch] hw_reset_delay : 90 ms
1281<6>[ 1.214722 / 01-01 00:00:01.209][3] [Touch] platform device registered ...
1282<6>[ 1.217516 / 01-01 00:00:01.209][3] fpc1020 spi8.1: found pin control fpc1020_spi_active
1283<6>[ 1.217536 / 01-01 00:00:01.209][3] fpc1020 spi8.1: found pin control fpc1020_reset_reset
1284<6>[ 1.217544 / 01-01 00:00:01.209][3] fpc1020 spi8.1: found pin control fpc1020_reset_active
1285<6>[ 1.217551 / 01-01 00:00:01.209][3] fpc1020 spi8.1: found pin control fpc1020_cs_low
1286<6>[ 1.217558 / 01-01 00:00:01.209][3] fpc1020 spi8.1: found pin control fpc1020_cs_high
1287<6>[ 1.217565 / 01-01 00:00:01.209][3] fpc1020 spi8.1: found pin control fpc1020_cs_active
1288<6>[ 1.217571 / 01-01 00:00:01.209][3] fpc1020 spi8.1: found pin control fpc1020_irq_active
1289<6>[ 1.217620 / 01-01 00:00:01.209][3] fpc1020 spi8.1: fpc1020_probe enable-wakeup
1290<6>[ 1.217893 / 01-01 00:00:01.209][3] fpc1020 spi8.1: Enabling hardware
1291<6>[ 1.221356 / 01-01 00:00:01.219][3] fpc1020 spi8.1: fpc1020_probe: ok
1292<6>[ 1.221407 / 01-01 00:00:01.219][3] fpc1020_init OK
1293<6>[ 1.221788 / 01-01 00:00:01.219][3] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
1294<6>[ 1.221975 / 01-01 00:00:01.219][3] i2c /dev entries driver
1295<6>[ 1.255407 / 01-01 00:00:01.249][3] vmem: Up and running with 4 banks of memory from [irq size 270720499657 window disabled]
1296<6>[ 1.273077 / 01-01 00:00:01.269][3] msm_actuator_get_dt_data:768 msm_actuator_get_dt_data gpio count -2
1297<3>[ 1.273111 / 01-01 00:00:01.269][3] msm_camera_pinctrl_init:1378 Getting pinctrl handle failed
1298<3>[ 1.273120 / 01-01 00:00:01.269][3] msm_camera_power_up:1552 Initialization of pinctrl failed
1299<3>[ 1.273130 / 01-01 00:00:01.269][3] msm_camera_request_gpio_table:741 invalid gpio_tbl 0000000000000000 / size 0
1300<6>[ 1.282946 / 01-01 00:00:01.279][3] msm_cci_init:1399: hw_version = 0x10040000
1301<3>[ 1.283219 / 01-01 00:00:01.279][3] msm_actuator_get_vcm_version:719 msm_actuator_get_vcm_version: [CHECK] vcm_ver(64) rc(0)
1302<3>[ 1.289845 / 01-01 00:00:01.279][3] msm_camera_request_gpio_table:741 invalid gpio_tbl 0000000000000000 / size 0
1303<3>[ 1.292391 / 01-01 00:00:01.289][3] msm_eeprom_platform_probe failed 1823
1304<3>[ 1.293017 / 01-01 00:00:01.289][3] msm_eeprom_platform_probe failed 1823
1305<3>[ 1.293571 / 01-01 00:00:01.289][3] msm_eeprom_i2c_probe failed 936
1306<3>[ 1.296101 / 01-01 00:00:01.289][3] msm_ois_platform_probe:1267 msm_ois_platform_probe: No/Error OIS GPIO
1307<6>[ 1.300170 / 01-01 00:00:01.299][1] [Touch] touch_ic_init Start
1308<6>[ 1.300199 / 01-01 00:00:01.299][1] [Touch] fb_notif change
1309<6>[ 1.300210 / 01-01 00:00:01.299][1] [Touch] sw49407_init: charger_state = 0x00
1310<6>[ 1.300493 / 01-01 00:00:01.299][1] [Touch] info ptr addr read : 0026425C
1311<6>[ 1.300596 / 01-01 00:00:01.299][1] [Touch] tc status read : 0F7000C0
1312<6>[ 1.300604 / 01-01 00:00:01.299][1] [Touch] ========== Info ADDR ==========
1313<6>[ 1.300613 / 01-01 00:00:01.299][1] [Touch] chip_info_addr : 025C
1314<6>[ 1.300620 / 01-01 00:00:01.299][1] [Touch] reg_info_addr : 0264
1315<6>[ 1.300627 / 01-01 00:00:01.299][1] [Touch] ========== Info ADDR ==========
1316<6>[ 1.300634 / 01-01 00:00:01.299][1] [Touch] Model ID is loaded
1317<6>[ 1.300642 / 01-01 00:00:01.299][1] [Touch] Production Test info checksum is ok
1318<6>[ 1.301467 / 01-01 00:00:01.299][1] [Touch] ==Print PT info Data==
1319<6>[ 1.301484 / 01-01 00:00:01.299][1] [Touch] version : v1.07, chip : 9, protocol : 4
1320<6>[ 1.301484 / 01-01 00:00:01.299][1] [Touch]
1321<6>[ 1.301484 / 01-01 00:00:01.299][1] [Touch] fpc : 2, lcm : 4, lot : 9
1322<6>[ 1.301484 / 01-01 00:00:01.299][1] [Touch] product id : L1L57P1
1323<6>[ 1.301484 / 01-01 00:00:01.299][1] [Touch] flash boot : idle, done, crc : ok
1324<6>[ 1.301502 / 01-01 00:00:01.299][1] [Touch] ==Print Config Header Data==
1325<6>[ 1.301510 / 01-01 00:00:01.299][1] [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, fpcb_id : 2, lot_id : 3
1326<6>[ 1.302023 / 01-01 00:00:01.299][1] [Touch] resume ts->lpwg.screen on
1327<3>[ 1.302028 / 01-01 00:00:01.299][3] msm_sensor_get_sub_module_index:309 src_node NULL
1328<6>[ 1.302133 / 01-01 00:00:01.299][1] [Touch] sw49407_lpwg_control mode = 0
1329<6>[ 1.302227 / 01-01 00:00:01.299][1] [Touch] swipe disable
1330<6>[ 1.302236 / 01-01 00:00:01.299][1] [Touch] sw49407_tc_driving = 3, 185
1331<6>[ 1.302330 / 01-01 00:00:01.299][1] [Touch] DDI Display Mode = 3
1332<6>[ 1.302511 / 01-01 00:00:01.299][1] [Touch] Reset Cnt : 51
1333<3>[ 1.302981 / 01-01 00:00:01.299][3] msm_sensor_get_sub_module_index:309 src_node NULL
1334<3>[ 1.303587 / 01-01 00:00:01.299][3] msm_sensor_get_sub_module_index:309 src_node NULL
1335<6>[ 1.309227 / 01-01 00:00:01.299][3] MSM-CPP cpp_init_hardware:867 CPP HW Version: 0x60000000
1336<3>[ 1.309256 / 01-01 00:00:01.299][3] MSM-CPP cpp_init_hardware:885 stream_cnt:0
1337<3>[ 1.322713 / 01-01 00:00:01.319][3] __msm_jpeg_init:1537] Jpeg Device id 0
1338<3>[ 1.323789 / 01-01 00:00:01.319][3] __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
1339<3>[ 1.328915 / 01-01 00:00:01.319][3] msm_fd_hw_set_dt_parms_by_name: Error property does not exist
1340<6>[ 1.330236 / 01-01 00:00:01.329][1] [Touch] sw49407_te_info : 546, 16.66 ms, 60.00 hz
1341<6>[ 1.330295 / 01-01 00:00:01.329][1] [Touch] get fwpath from def_fwpath : rev:0
1342<6>[ 1.330304 / 01-01 00:00:01.329][1] [Touch] fwpath[touch/elsa/L1L57P1_1_07.img]
1343<6>[ 1.330318 / 01-01 00:00:01.329][1] [Touch] fw size:91648, data: ffffffc000ed13a8
1344<6>[ 1.330328 / 01-01 00:00:01.329][1] [Touch] sw49407_fw_compare : binary[1.07.0] device[1.07.0] -> update: 0, force: 0
1345<6>[ 1.330338 / 01-01 00:00:01.329][1] [Touch] There is no need to reset (ret: -1)
1346<6>[ 1.330353 / 01-01 00:00:01.329][1] [Touch] touch_ic_init Start
1347<6>[ 1.330362 / 01-01 00:00:01.329][1] [Touch] sw49407_init: charger_state = 0x00
1348<6>[ 1.330458 / 01-01 00:00:01.329][1] [Touch] info ptr addr read : 0026425C
1349<6>[ 1.330553 / 01-01 00:00:01.329][1] [Touch] tc status read : 0F5000E4
1350<6>[ 1.330561 / 01-01 00:00:01.329][1] [Touch] ========== Info ADDR ==========
1351<6>[ 1.330568 / 01-01 00:00:01.329][1] [Touch] chip_info_addr : 025C
1352<6>[ 1.330575 / 01-01 00:00:01.329][1] [Touch] reg_info_addr : 0264
1353<6>[ 1.330582 / 01-01 00:00:01.329][1] [Touch] ========== Info ADDR ==========
1354<6>[ 1.330589 / 01-01 00:00:01.329][1] [Touch] Model ID is loaded
1355<6>[ 1.330596 / 01-01 00:00:01.329][1] [Touch] Production Test info checksum is ok
1356<6>[ 1.331386 / 01-01 00:00:01.329][1] [Touch] ==Print PT info Data==
1357<6>[ 1.331401 / 01-01 00:00:01.329][1] [Touch] version : v1.07, chip : 9, protocol : 4
1358<6>[ 1.331401 / 01-01 00:00:01.329][1] [Touch]
1359<6>[ 1.331401 / 01-01 00:00:01.329][1] [Touch] fpc : 2, lcm : 4, lot : 9
1360<6>[ 1.331401 / 01-01 00:00:01.329][1] [Touch] product id : L1L57P1
1361<6>[ 1.331401 / 01-01 00:00:01.329][1] [Touch] flash boot : idle, done, crc : ok
1362<6>[ 1.331419 / 01-01 00:00:01.329][1] [Touch] ==Print Config Header Data==
1363<6>[ 1.331426 / 01-01 00:00:01.329][1] [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, fpcb_id : 2, lot_id : 3
1364<6>[ 1.331929 / 01-01 00:00:01.329][1] [Touch] resume ts->lpwg.screen on
1365<6>[ 1.332025 / 01-01 00:00:01.329][1] [Touch] sw49407_lpwg_control mode = 0
1366<6>[ 1.332115 / 01-01 00:00:01.329][1] [Touch] swipe disable
1367<6>[ 1.332124 / 01-01 00:00:01.329][1] [Touch] sw49407_tc_driving = 3, 185
1368<6>[ 1.332217 / 01-01 00:00:01.329][1] [Touch] DDI Display Mode = 3
1369<6>[ 1.332392 / 01-01 00:00:01.329][1] [Touch] Reset Cnt : 51
1370<6>[ 1.360152 / 01-01 00:00:01.359][1] [Touch] sw49407_te_info : 546, 16.66 ms, 60.00 hz
1371<6>[ 1.360173 / 01-01 00:00:01.359][1] [Touch] touch_ic_init End
1372<6>[ 1.372644 / 01-01 00:00:01.369][2] [Touch] TC_Driving OK
1373<3>[ 1.420063 / 01-01 00:00:01.419][3] msm_fd aa4000.qcom,fd: Face detection halt timeout
1374<0>[ 1.420497 / 01-01 00:00:01.419][3] drv probe : 1327 msm_fd 93
1375<3>[ 1.421105 / 01-01 00:00:01.419][1] ufshcd 624000.ufshc: [LGE][UFS] update quirks, manufacturerid:65535, model:ANY_MODEL, quirk:0x80
1376<6>[ 1.421372 / 01-01 00:00:01.419][3] usbcore: registered new interface driver uvcvideo
1377<6>[ 1.421380 / 01-01 00:00:01.419][3] USB Video Class driver (1.1.1)
1378<6>[ 1.421389 / 01-01 00:00:01.419][3] gspca_main: v2.14.0 registered
1379<6>[ 1.421724 / 01-01 00:00:01.419][3] SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
1380<6>[ 1.422269 / 01-01 00:00:01.419][3] FG: fg_of_init: batt_profile_enabled : 1
1381<6>[ 1.422278 / 01-01 00:00:01.419][3] FG: fg_of_init: lge_rid_disable : 0
1382<6>[ 1.422292 / 01-01 00:00:01.419][3] FG: fg_of_init: rconn_mohm : 30
1383<3>[ 1.422854 / 01-01 00:00:01.419][3] FG: cc_soc_store_work: nom_cap_uah zero!
1384<6>[ 1.423670 / 01-01 00:00:01.419][2] FG: fg_batt_missing_irq_handler: batt-missing triggered: present
1385<6>[ 1.424310 / 01-01 00:00:01.419][3] FG: fg_probe: rbias software control : 0
1386<6>[ 1.424369 / 01-01 00:00:01.419][3] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
1387<3>[ 1.425753 / 01-01 00:00:01.419][1] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
1388<3>[ 1.425860 / 01-01 00:00:01.419][1] ufshcd_get_max_icc_level: Couldn't find valid icc_level = 0
1389<5>[ 1.426764 / 01-01 00:00:01.419][1] scsi 0:0:0:49488: Well-known LUN SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1390<3>[ 1.427095 / 01-01 00:00:01.419][3] FG: fg_set_resume_soc: recharge_M resume soc lowered to 0xf7
1391<6>[ 1.428132 / 01-01 00:00:01.419][2] panic-handler: free[@0xc0100000+@0xc00000)
1392<5>[ 1.428173 / 01-01 00:00:01.419][1] scsi 0:0:0:49456: Well-known LUN SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1393<5>[ 1.429600 / 01-01 00:00:01.419][1] scsi 0:0:0:49476: Well-known LUN SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1394<5>[ 1.431012 / 01-01 00:00:01.429][1] scsi 0:0:0:0: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1395<5>[ 1.432313 / 01-01 00:00:01.429][1] scsi 0:0:0:1: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1396<5>[ 1.433058 / 01-01 00:00:01.429][1] scsi 0:0:0:2: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1397<5>[ 1.434100 / 01-01 00:00:01.429][1] scsi 0:0:0:3: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1398<5>[ 1.434983 / 01-01 00:00:01.429][1] scsi 0:0:0:4: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1399<5>[ 1.435812 / 01-01 00:00:01.429][1] scsi 0:0:0:5: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1400<5>[ 1.437127 / 01-01 00:00:01.429][1] scsi 0:0:0:6: Direct-Access SKhynix H28U74301AMR E005 PQ: 0 ANSI: 6
1401<6>[ 1.468890 / 01-01 00:00:01.459][3] device-mapper: uevent: version 1.0.3
1402<6>[ 1.469057 / 01-01 00:00:01.459][3] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
1403<6>[ 1.469151 / 01-01 00:00:01.459][3] device-mapper: req-crypt: dm-req-crypt successfully initalized.
1404<6>[ 1.469151 / 01-01 00:00:01.459][3]
1405<6>[ 1.469332 / 01-01 00:00:01.459][3] sdhci: Secure Digital Host Controller Interface driver
1406<6>[ 1.469340 / 01-01 00:00:01.459][3] sdhci: Copyright(c) Pierre Ossman
1407<6>[ 1.469349 / 01-01 00:00:01.459][3] sdhci-pltfm: SDHCI platform and OF driver helper
1408<6>[ 1.470662 / 01-01 00:00:01.469][3] qcom_ice_get_pdevice: found ice device ffffffc0f6e18000
1409<6>[ 1.470678 / 01-01 00:00:01.469][3] qcom_ice_get_pdevice: matching platform device ffffffc0f8304800
1410<4>[ 1.471169 / 01-01 00:00:01.469][3] sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
1411<6>[ 1.485376 / 01-01 00:00:01.479][0] sdhci_msm 74a4900.sdhci: No vmmc regulator found
1412<6>[ 1.485405 / 01-01 00:00:01.479][0] sdhci_msm 74a4900.sdhci: No vqmmc regulator found
1413<6>[ 1.485744 / 01-01 00:00:01.479][0] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using 64-bit ADMA in legacy mode
1414<0>[ 1.530312 / 01-01 00:00:01.529][0] drv probe : 1471 sdhci_msm 59
1415<6>[ 1.540762 / 01-01 00:00:01.539][2] hidraw: raw HID events driver (C) Jiri Kosina
1416<6>[ 1.541808 / 01-01 00:00:01.539][2] usbcore: registered new interface driver usbhid
1417<6>[ 1.541816 / 01-01 00:00:01.539][2] usbhid: USB HID core driver
1418<6>[ 1.542272 / 01-01 00:00:01.539][3] ashmem: initialized
1419<6>[ 1.542375 / 01-01 00:00:01.539][3] logger: created 256K log 'log_main'
1420<6>[ 1.542449 / 01-01 00:00:01.539][3] logger: created 256K log 'log_events'
1421<6>[ 1.542518 / 01-01 00:00:01.539][3] logger: created 256K log 'log_radio'
1422<6>[ 1.542602 / 01-01 00:00:01.539][3] logger: created 256K log 'log_system'
1423<6>[ 1.543550 / 01-01 00:00:01.539][3] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
1424<6>[ 1.549910 / 01-01 00:00:01.539][3] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
1425<6>[ 1.551563 / 01-01 00:00:01.549][3] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
1426<6>[ 1.551609 / 01-01 00:00:01.549][3] arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
1427<6>[ 1.554126 / 01-01 00:00:01.549][3] m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
1428<3>[ 1.558055 / 01-01 00:00:01.549][3] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
1429<3>[ 1.558178 / 01-01 00:00:01.549][3] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
1430<3>[ 1.558288 / 01-01 00:00:01.549][3] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
1431<3>[ 1.558395 / 01-01 00:00:01.549][3] devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
1432<3>[ 1.559380 / 01-01 00:00:01.549][3] devfreq soc:qcom,m4m: Couldn't update frequency transition information.
1433<6>[ 1.561801 / 01-01 00:00:01.559][3] Trustonic TEE: mobicore_init: MobiCore mcDrvModuleApi version is 3.0
1434<6>[ 1.562061 / 01-01 00:00:01.559][3] Trustonic TEE: mobicore_probe: MobiCore t-base-QC-MSM8996-Android-310C-V005-20160617_153829_12623
1435<6>[ 1.562619 / 01-01 00:00:01.559][3] usbcore: registered new interface driver snd-usb-audio
1436<6>[ 1.562645 / 01-01 00:00:01.559][3] usbcore: registered new interface driver snd-ua101
1437<6>[ 1.562666 / 01-01 00:00:01.559][3] usbcore: registered new interface driver snd-usb-caiaq
1438<6>[ 1.562686 / 01-01 00:00:01.559][3] usbcore: registered new interface driver snd-usb-6fire
1439<3>[ 1.564748 / 01-01 00:00:01.559][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1440<3>[ 1.564769 / 01-01 00:00:01.559][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1441<3>[ 1.564907 / 01-01 00:00:01.559][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1442<3>[ 1.564922 / 01-01 00:00:01.559][3] msm8996-pinctrl 1010000.pinctrl: invalid group "gpio143" for function "spkr_i2s"
1443<6>[ 1.566091 / 01-01 00:00:01.559][3] es9218_init()
1444<6>[ 1.566134 / 01-01 00:00:01.559][3] es9218_probe
1445<6>[ 1.566146 / 01-01 00:00:01.559][3] es9218_hw_rev_check() lg board2 rev_(12)
1446<6>[ 1.566204 / 01-01 00:00:01.559][3] es9218_populate_get_pdata: reset gpio 989
1447<6>[ 1.566220 / 01-01 00:00:01.559][3] es9218_populate_get_pdata: hph switch 1013<6>[ 1.566236 / 01-01 00:00:01.559][3] es9218_populate_get_pdata: power gpio 1014
1448<6>[ 1.566356 / 01-01 00:00:01.559][3] es9218_probe() g_ess_rev:2
1449<4>[ 1.566370 / 01-01 00:00:01.559][3] snd_soc_register_codec ret = 0
1450<6>[ 1.576174 / 01-01 00:00:01.569][3] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
1451<6>[ 1.576432 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
1452<6>[ 1.576444 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1453<6>[ 1.576593 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
1454<6>[ 1.576604 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1455<6>[ 1.576750 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
1456<6>[ 1.576760 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1457<6>[ 1.576902 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
1458<6>[ 1.576912 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1459<6>[ 1.576934 / 01-01 00:00:01.569][3] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
1460<6>[ 1.577072 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
1461<6>[ 1.577082 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1462<6>[ 1.577219 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
1463<6>[ 1.577230 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1464<6>[ 1.577371 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
1465<6>[ 1.577381 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1466<6>[ 1.577521 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
1467<6>[ 1.577530 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1468<6>[ 1.577551 / 01-01 00:00:01.569][3] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
1469<6>[ 1.577692 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
1470<6>[ 1.577701 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1471<6>[ 1.577840 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
1472<6>[ 1.577850 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1473<6>[ 1.577995 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
1474<6>[ 1.578004 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1475<6>[ 1.578147 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
1476<6>[ 1.578156 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1477<6>[ 1.578178 / 01-01 00:00:01.569][3] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
1478<6>[ 1.578315 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
1479<6>[ 1.578324 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1480<6>[ 1.578463 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
1481<6>[ 1.578473 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1482<6>[ 1.578613 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
1483<6>[ 1.578622 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1484<6>[ 1.578760 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
1485<6>[ 1.578770 / 01-01 00:00:01.569][3] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
1486<6>[ 1.581256 / 01-01 00:00:01.579][3] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
1487<6>[ 1.593217 / 01-01 00:00:01.589][3] GACT probability on
1488<6>[ 1.593237 / 01-01 00:00:01.589][3] Mirror/redirect action on
1489<6>[ 1.593252 / 01-01 00:00:01.589][3] Simple TC action Loaded
1490<6>[ 1.593492 / 01-01 00:00:01.589][3] netem: version 1.3
1491<6>[ 1.593510 / 01-01 00:00:01.589][3] u32 classifier
1492<6>[ 1.593515 / 01-01 00:00:01.589][3] Performance counters on
1493<6>[ 1.593520 / 01-01 00:00:01.589][3] input device check on
1494<6>[ 1.593524 / 01-01 00:00:01.589][3] Actions configured
1495<6>[ 1.593558 / 01-01 00:00:01.589][3] Netfilter messages via NETLINK v0.30.
1496<6>[ 1.593588 / 01-01 00:00:01.589][3] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
1497<6>[ 1.593796 / 01-01 00:00:01.589][3] ctnetlink v0.93: registering with nfnetlink.
1498<6>[ 1.594089 / 01-01 00:00:01.589][3] xt_time: kernel timezone is -0000
1499<6>[ 1.594108 / 01-01 00:00:01.589][3] 939-23012-001-quicksec-vpnclient-for-android-3.4-3478-b05f514d009c-3478
1500<6>[ 1.594113 / 01-01 00:00:01.589][3] vpnclient kernel spd loaded.
1501<6>[ 1.594254 / 01-01 00:00:01.589][3] ip_tables: (C) 2000-2006 Netfilter Core Team
1502<6>[ 1.594329 / 01-01 00:00:01.589][3] arp_tables: (C) 2002 David S. Miller
1503<6>[ 1.594355 / 01-01 00:00:01.589][3] TCP: bic registered
1504<6>[ 1.594363 / 01-01 00:00:01.589][3] TCP: cubic registered
1505<6>[ 1.594370 / 01-01 00:00:01.589][3] Initializing XFRM netlink socket
1506<6>[ 1.594540 / 01-01 00:00:01.589][3] NET: Registered protocol family 10
1507<7>[ 1.594941 / 01-01 00:00:01.589][3] now = 4294937455, schedule = 4294949491, rounded schedule = 4294949591 => 4294949491
1508<6>[ 1.595021 / 01-01 00:00:01.589][3] mip6: Mobile IPv6
1509<6>[ 1.595041 / 01-01 00:00:01.589][3] ip6_tables: (C) 2000-2006 Netfilter Core Team
1510<6>[ 1.595117 / 01-01 00:00:01.589][3] sit: IPv6 over IPv4 tunneling driver
1511<6>[ 1.595332 / 01-01 00:00:01.589][3] NET: Registered protocol family 17
1512<6>[ 1.595348 / 01-01 00:00:01.589][3] NET: Registered protocol family 15
1513<6>[ 1.595375 / 01-01 00:00:01.589][3] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
1514<6>[ 1.595385 / 01-01 00:00:01.589][3] Ebtables v2.0 registered
1515<6>[ 1.595474 / 01-01 00:00:01.589][3] l2tp_core: L2TP core driver, V2.0
1516<6>[ 1.595486 / 01-01 00:00:01.589][3] l2tp_ppp: PPPoL2TP kernel driver, V2.0
1517<6>[ 1.595493 / 01-01 00:00:01.589][3] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
1518<6>[ 1.595509 / 01-01 00:00:01.589][3] l2tp_netlink: L2TP netlink interface
1519<6>[ 1.595525 / 01-01 00:00:01.589][3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
1520<6>[ 1.595549 / 01-01 00:00:01.589][3] l2tp_debugfs: L2TP debugfs support
1521<6>[ 1.595556 / 01-01 00:00:01.589][3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
1522<6>[ 1.596424 / 01-01 00:00:01.589][3] NET: Registered protocol family 27
1523<6>[ 1.598506 / 01-01 00:00:01.589][0] usb_otg_vreg: no parameters
1524<3>[ 1.598562 / 01-01 00:00:01.589][0] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
1525<3>[ 1.598629 / 01-01 00:00:01.589][0] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
1526<6>[ 1.601195 / 01-01 00:00:01.599][0] subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
1527<6>[ 1.602195 / 01-01 00:00:01.599][0] subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
1528<4>[ 1.603388 / 01-01 00:00:01.599][0] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
1529<6>[ 1.604028 / 01-01 00:00:01.599][0] pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
1530<3>[ 1.604248 / 01-01 00:00:01.599][0] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe starts!!!
1531<3>[ 1.604349 / 01-01 00:00:01.599][0] [LGE-ADC] lge_adc_qct_probe : XO_THERM_CH : 114, PA0_THERM_CH : 117, PA1_THERM_CH : 119
1532<3>[ 1.604358 / 01-01 00:00:01.599][0] [LGE-ADC] lge_adc_qct_probe : BD1_THERM_CH : 255, BD2_THERM_CH : 116
1533<3>[ 1.604366 / 01-01 00:00:01.599][0] [LGE-ADC] lge_adc_qct_probe : BATT_THERM_CH : -22, USB_ID_CH : 57
1534<6>[ 1.604477 / 01-01 00:00:01.599][0] [LGE-ADC] lge_adc_qct_probe : lge_battery_probe done!!!
1535<6>[ 1.604495 / 01-01 00:00:01.599][0] lge_power_changed_work
1536<6>[ 1.604651 / 01-01 00:00:01.599][0] [LGE-CD] cable_detect_probe : lge_cable_detect probe start!
1537<6>[ 1.604790 / 01-01 00:00:01.599][0] lge_power_changed_work
1538<6>[ 1.604810 / 01-01 00:00:01.599][0] [LGE-CC] lgcc_vote_fcc_update : lgcc_vote: vote id[0], set cur[3100]
1539<6>[ 1.604835 / 01-01 00:00:01.599][0] [LGE-CC] lge_check_typec_work : Check c-type cable
1540<3>[ 1.604845 / 01-01 00:00:01.599][0] [LGE-CC] lge_hvdcp_set_ibat_work : Check HVDCP
1541<6>[ 1.604854 / 01-01 00:00:01.599][0] lge_power_changed_work
1542<6>[ 1.606187 / 01-01 00:00:01.599][0] [LGE-CD] cable_detect_read_cable_info : adc = 1792000
1543<6>[ 1.606195 / 01-01 00:00:01.599][0] [LGE-CD] cable_detect_read_cable_info : cable info --> 14
1544<6>[ 1.606202 / 01-01 00:00:01.599][0] [LGE-CD] cable_detect_probe : cable_detect probe end!
1545<6>[ 1.607314 / 01-01 00:00:01.599][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1546<6>[ 1.622816 / 01-01 00:00:01.619][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1547<6>[ 1.624577 / 01-01 00:00:01.619][0] sps:BAM 0x0000000006b04000 is registered.
1548<3>[ 1.625542 / 01-01 00:00:01.619][0] [LGE-CD] lge_cable_detect_external_power_changed : ibat 500000, iusb 500000
1549<6>[ 1.625628 / 01-01 00:00:01.619][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1550<6>[ 1.625790 / 01-01 00:00:01.619][0] lge_power_changed_work
1551<6>[ 1.625858 / 01-01 00:00:01.619][0] [LGE-CC] lge_check_typec_work : Check c-type cable
1552<3>[ 1.625869 / 01-01 00:00:01.619][0] [LGE-CC] lge_hvdcp_set_ibat_work : Check HVDCP
1553<3>[ 1.626440 / 01-01 00:00:01.619][1] anx7688-usbc 6-0028: battery supply not found, deferring probe
1554<3>[ 1.626531 / 01-01 00:00:01.619][1] SMBCHG: smbchg_probe: Success get LG power class property
1555<3>[ 1.626656 / 01-01 00:00:01.619][1] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1556<6>[ 1.626856 / 01-01 00:00:01.619][1] smbcharger_charger_otg: no parameters
1557<6>[ 1.627018 / 01-01 00:00:01.619][1] smbcharger_external_otg: no parameters
1558<6>[ 1.627053 / 01-01 00:00:01.619][1] smbcharger_external_otg: supplied by pmi8994_boost_5v
1559<3>[ 1.627551 / 01-01 00:00:01.619][1] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1560<7>[ 1.627559 / 01-01 00:00:01.619][1] SMBCHG: battchg_suspend: 1 voting for 0 - off
1561<3>[ 1.628159 / 01-01 00:00:01.619][1] vote: name[SMBCHG: usb_suspend], client_id[0], state[0], val[0]
1562<7>[ 1.628244 / 01-01 00:00:01.619][1] SMBCHG: usb_suspend: 0 voting for 0 - off
1563<3>[ 1.628251 / 01-01 00:00:01.619][1] vote: name[SMBCHG: dc_suspend], client_id[0], state[0], val[0]
1564<7>[ 1.628259 / 01-01 00:00:01.619][1] SMBCHG: dc_suspend: 0 voting for 0 - off
1565<3>[ 1.628589 / 01-01 00:00:01.619][1] vote: name[SMBCHG: dcl_icl], client_id[0], state[1], val[1500]
1566<7>[ 1.628597 / 01-01 00:00:01.619][1] SMBCHG: dcl_icl: 0 voting for 1500 - on
1567<7>[ 1.628602 / 01-01 00:00:01.619][1] SMBCHG: dcl_icl: vote_min min_vote=1500, client_index=0
1568<7>[ 1.628608 / 01-01 00:00:01.619][1] SMBCHG: dcl_icl: effective vote is now 1500 voted by 0
1569<3>[ 1.628722 / 01-01 00:00:01.619][1] vote: name[SMBCHG: fcc], client_id[1], state[1], val[3100]
1570<7>[ 1.628729 / 01-01 00:00:01.619][1] SMBCHG: fcc: 1 voting for 3100 - on
1571<7>[ 1.628735 / 01-01 00:00:01.619][1] SMBCHG: fcc: vote_min min_vote=3100, client_index=1
1572<7>[ 1.628740 / 01-01 00:00:01.619][1] SMBCHG: fcc: effective vote is now 3100 voted by 1
1573<3>[ 1.628937 / 01-01 00:00:01.619][1] vote: name[SMBCHG: hwaicl_enable_indirect], client_id[0], state[1], val[0]
1574<7>[ 1.628946 / 01-01 00:00:01.619][1] SMBCHG: hwaicl_enable_indirect: 0 voting for 0 - on
1575<3>[ 1.628952 / 01-01 00:00:01.619][1] vote: name[SMBCHG: hwaicl_disable], client_id[0], state[0], val[0]
1576<7>[ 1.628958 / 01-01 00:00:01.619][1] SMBCHG: hwaicl_disable: 0 voting for 0 - off
1577<3>[ 1.629191 / 01-01 00:00:01.619][1] FG: set_resume_soc_work: recharge_M 0(ta)-0(lowered)-0(chg_done)-1(health)
1578<6>[ 1.650074 / 01-01 00:00:01.649][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1579<3>[ 1.650295 / 01-01 00:00:01.649][1] vote: name[SMBCHG: hwaicl_disable], client_id[1], state[0], val[0]
1580<7>[ 1.650302 / 01-01 00:00:01.649][1] SMBCHG: hwaicl_disable: 1 voting for 0 - off
1581<3>[ 1.650308 / 01-01 00:00:01.649][1] vote: name[SMBCHG: usb_suspend], client_id[6], state[0], val[0]
1582<7>[ 1.650314 / 01-01 00:00:01.649][1] SMBCHG: usb_suspend: 6 voting for 0 - off
1583<3>[ 1.650345 / 01-01 00:00:01.649][1] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[100]
1584<7>[ 1.650352 / 01-01 00:00:01.649][1] SMBCHG: usb_icl: 0 voting for 100 - on
1585<7>[ 1.650357 / 01-01 00:00:01.649][1] SMBCHG: usb_icl: vote_min min_vote=100, client_index=0
1586<7>[ 1.650362 / 01-01 00:00:01.649][1] SMBCHG: usb_icl: effective vote is now 100 voted by 0
1587<3>[ 1.650368 / 01-01 00:00:01.649][1] vote: name[SMBCHG: usb_suspend], client_id[2], state[0], val[0]
1588<7>[ 1.650374 / 01-01 00:00:01.649][1] SMBCHG: usb_suspend: 2 voting for 0 - off
1589<3>[ 1.650467 / 01-01 00:00:01.649][1] vote: name[SMBCHG: usb_icl], client_id[9], state[1], val[2000]
1590<7>[ 1.650473 / 01-01 00:00:01.649][1] SMBCHG: usb_icl: 9 voting for 2000 - on
1591<7>[ 1.650478 / 01-01 00:00:01.649][1] SMBCHG: usb_icl: vote_min min_vote=100, client_index=0
1592<6>[ 1.650487 / 01-01 00:00:01.649][1] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: charger type: USB_SDP_CHARGER
1593<6>[ 1.650502 / 01-01 00:00:01.649][1] [DWC3] factory mode 0
1594<6>[ 1.650510 / 01-01 00:00:01.649][1] dwc3_floated_chg_check: start check floated charger
1595<6>[ 1.650618 / 01-01 00:00:01.649][1] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: notify xceiv event with val:1, vbus_active:0
1596<6>[ 1.650625 / 01-01 00:00:01.649][1] dwc3_ext_event_notify
1597<3>[ 1.651016 / 01-01 00:00:01.649][1] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x20 (ok)
1598<6>[ 1.651139 / 01-01 00:00:01.649][1] msm-dwc3 6a00000.ssusb: undefined state, vbus:online
1599<3>[ 1.652785 / 01-01 00:00:01.649][1] [LGE-CD] lge_cable_detect_external_power_changed : chg_present 1, prev 0
1600<3>[ 1.652797 / 01-01 00:00:01.649][1] [LGE-CD] lge_cable_detect_external_power_changed : ibat 500000, iusb 500000
1601<6>[ 1.652816 / 01-01 00:00:01.649][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1602<6>[ 1.652948 / 01-01 00:00:01.649][1] lge_power_changed_work
1603<6>[ 1.652965 / 01-01 00:00:01.649][1] [LGE-CC] lge_cc_external_lge_power_changed : usb present : 1
1604<3>[ 1.653502 / 01-01 00:00:01.649][1] SMB1351 smb1351_fastchg_current_set: smb1351_fastchg_current_set - fastchg_current[1000]
1605<3>[ 1.654881 / 01-01 00:00:01.649][1] SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 0
1606<3>[ 1.655136 / 01-01 00:00:01.649][1] SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 4
1607<6>[ 1.655475 / 01-01 00:00:01.649][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1608<3>[ 1.656040 / 01-01 00:00:01.649][1] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[100]
1609<7>[ 1.656049 / 01-01 00:00:01.649][1] SMBCHG: usb_icl: votes unchanged; skipping
1610<3>[ 1.656055 / 01-01 00:00:01.649][1] vote: name[SMBCHG: usb_icl], client_id[9], state[1], val[2000]
1611<7>[ 1.656061 / 01-01 00:00:01.649][1] SMBCHG: usb_icl: votes unchanged; skipping
1612<6>[ 1.656069 / 01-01 00:00:01.649][1] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: charger type: USB_SDP_CHARGER
1613<6>[ 1.656081 / 01-01 00:00:01.649][1] [DWC3] factory mode 0
1614<6>[ 1.656090 / 01-01 00:00:01.649][1] dwc3_floated_chg_check: start check floated charger
1615<6>[ 1.656196 / 01-01 00:00:01.649][1] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: notify xceiv event with val:1, vbus_active:1
1616<6>[ 1.656203 / 01-01 00:00:01.649][1] dwc3_ext_event_notify
1617<6>[ 1.656834 / 01-01 00:00:01.649][1] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1618<6>[ 1.681851 / 01-01 00:00:01.679][1] [DWC3] factory mode 0
1619<6>[ 1.681889 / 01-01 00:00:01.679][0] [Touch] NOTIFY_CONNECTION!
1620<6>[ 1.681898 / 01-01 00:00:01.679][0] [Touch] TA Type: 1
1621<6>[ 1.681907 / 01-01 00:00:01.679][0] [Touch] sw49407_connect: write charger_state = 0x01
1622<6>[ 1.687666 / 01-01 00:00:01.679][0] msm-dwc3 6a00000.ssusb: b_peripheral state, vbus:online
1623<6>[ 1.687691 / 01-01 00:00:01.679][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1624<3>[ 1.690467 / 01-01 00:00:01.689][0] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1625<7>[ 1.690481 / 01-01 00:00:01.689][0] SMBCHG: battchg_suspend: votes unchanged; skipping
1626<3>[ 1.693342 / 01-01 00:00:01.689][0] qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
1627<6>[ 1.693363 / 01-01 00:00:01.689][0] msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb: notify xceiv event with val:1, vbus_active:1
1628<6>[ 1.700318 / 01-01 00:00:01.699][1] qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
1629<0>[ 1.700330 / 01-01 00:00:01.699][1] drv probe : 1626 qpnp-smbcharger 73
1630<6>[ 1.701030 / 01-01 00:00:01.699][0] FG: update_sram_data: soc:[50], soc_raw[9966], voltage:[4320348], ocv:[4365971], current:[438535], batt_temp:[-22], charge_raw [0 / 0]
1631<3>[ 1.701049 / 01-01 00:00:01.699][0] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
1632<3>[ 1.701099 / 01-01 00:00:01.699][0] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
1633<7>[ 1.701106 / 01-01 00:00:01.699][0] SMBCHG: usb_icl: 0 voting for 0 - on
1634<7>[ 1.701112 / 01-01 00:00:01.699][0] SMBCHG: usb_icl: vote_min min_vote=0, client_index=0
1635<7>[ 1.701118 / 01-01 00:00:01.699][0] SMBCHG: usb_icl: effective vote is now 0 voted by 0
1636<3>[ 1.701125 / 01-01 00:00:01.699][0] vote: name[SMBCHG: usb_suspend], client_id[2], state[1], val[0]
1637<7>[ 1.701132 / 01-01 00:00:01.699][0] SMBCHG: usb_suspend: 2 voting for 0 - on
1638<6>[ 1.701249 / 01-01 00:00:01.699][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1639<6>[ 1.703343 / 01-01 00:00:01.699][2] usb_otg_vreg: no parameters
1640<6>[ 1.703376 / 01-01 00:00:01.699][2] usb_otg_vreg: supplied by smbcharger_external_otg
1641<3>[ 1.703923 / 01-01 00:00:01.699][0] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1642<7>[ 1.703935 / 01-01 00:00:01.699][0] SMBCHG: battchg_suspend: votes unchanged; skipping
1643<3>[ 1.703944 / 01-01 00:00:01.699][0] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
1644<3>[ 1.703987 / 01-01 00:00:01.699][0] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
1645<7>[ 1.703994 / 01-01 00:00:01.699][0] SMBCHG: usb_icl: votes unchanged; skipping
1646<6>[ 1.704125 / 01-01 00:00:01.699][2] anx7688-usbc 6-0028: usb pd max volt: 9000mV, max power: 27000mW, min power: 3000mW
1647<3>[ 1.724968 / 01-01 00:00:01.719][2] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x21 (ok)
1648<6>[ 1.775693 / 01-01 00:00:01.769][2] anx7688-usbc 6-0028: boot load done
1649<6>[ 1.780858 / 01-01 00:00:01.779][2] anx7688-usbc 6-0028: request_firmware(analogix/mi1_eeprom_20_8b.img)
1650<6>[ 1.798288 / 01-01 00:00:01.789][1] [LGE][MMC][mmc_read_ssr ( )] mmc_hostname:mmc0, 4 ==> SPEED_CLASS 10
1651<6>[ 1.904228 / 01-01 00:00:01.899][1] mmc0: new ultra high speed SDR104 SDXC card at address 0001
1652<6>[ 1.904241 / 01-01 00:00:01.899][1] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc0, type:SDXC
1653<6>[ 1.904447 / 01-01 00:00:01.899][1] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0x3) latency=70 (0xffffffc0f57f8300)
1654<6>[ 1.904465 / 01-01 00:00:01.899][1] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc) latency=70 (0xffffffc0f57f8308)
1655<6>[ 1.904562 / 01-01 00:00:01.899][1] mmcblk0: mmc0:0001 00000 238 GiB
1656<6>[ 1.906746 / 01-01 00:00:01.899][1] mmcblk0: p1
1657<6>[ 1.906975 / 01-01 00:00:01.899][1] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
1658<6>[ 1.943781 / 01-01 00:00:01.939][1] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21
1659<6>[ 1.952385 / 01-01 00:00:01.949][3] sdg: sdg1 sdg2
1660<6>[ 1.952406 / 01-01 00:00:01.949][2] sdf: sdf1 sdf2 sdf3 sdf4 sdf5
1661<6>[ 1.952454 / 01-01 00:00:01.949][1] sdc: sdc1 sdc2 sdc3
1662<6>[ 1.952581 / 01-01 00:00:01.949][0] sdd: sdd1 sdd2 sdd3 sdd4 sdd5
1663<6>[ 1.953181 / 01-01 00:00:01.949][2] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29
1664<6>[ 1.953843 / 01-01 00:00:01.949][3] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
1665<6>[ 2.941958 / 01-01 00:00:02.939][3] FG: comp_temp_by_chg_current: fg_temp = 315 comp_temp1 = 285 comp_temp2 = 285 delta1 = -30 delta2 = 0 avg_chg_curr = 0 now_chg_curr = 0 batt_charging = 0
1666<3>[ 2.942062 / 01-01 00:00:02.939][3] vote: name[SMBCHG: battchg_suspend], client_id[0], state[1], val[0]
1667<7>[ 2.942069 / 01-01 00:00:02.939][3] SMBCHG: battchg_suspend: 0 voting for 0 - on
1668<6>[ 2.951093 / 01-01 00:00:02.949][3] FG: update_sram_data: soc:[50], soc_raw[9966], voltage:[4337132], ocv:[4365971], current:[297239], batt_temp:[285], charge_raw [0 / 0]
1669<6>[ 3.650068 / 01-01 00:00:03.649][1] determine_lge_charging_state : states_change[0], next_state[0], pseudo_chg_ui[0]
1670<3>[ 3.650085 / 01-01 00:00:03.649][1] LGE charging scenario : state 0 -> 0(0-1), temp=28, volt=4337, BTM=0, charger=1, cur_set=0/0, chg_cur = 297
1671<6>[ 3.650094 / 01-01 00:00:03.649][1] [LGE-CC] lge_monitor_batt_temp_work : ibatmax_set CHG_BATT_NORMAL_STATE
1672<6>[ 3.650102 / 01-01 00:00:03.649][1] [LGE-CC] lge_monitor_batt_temp_work : otp_ibat_current=0
1673<6>[ 3.650110 / 01-01 00:00:03.649][1] [LGE-CC] lge_monitor_batt_temp_work : chg_wake_locked
1674<6>[ 3.650122 / 01-01 00:00:03.649][1] [LGE-CC] lge_monitor_batt_temp_work : Reported Capacity : 50 / voltage : 4337
1675<6>[ 3.650131 / 01-01 00:00:03.649][1] lge_power_changed_work
1676<6>[ 3.650148 / 01-01 00:00:03.649][1] SMBCHG: smbchg_external_lge_power_changed: [LGE-CC] fcc 3100, otp set 3100
1677<3>[ 3.650157 / 01-01 00:00:03.649][1] vote: name[SMBCHG: fcc], client_id[5], state[1], val[3100]
1678<7>[ 3.650164 / 01-01 00:00:03.649][1] SMBCHG: fcc: 5 voting for 3100 - on
1679<7>[ 3.650170 / 01-01 00:00:03.649][1] SMBCHG: fcc: vote_min min_vote=3100, client_index=1
1680<3>[ 3.650176 / 01-01 00:00:03.649][1] vote: name[SMBCHG: battchg_suspend], client_id[2], state[0], val[0]
1681<7>[ 3.650182 / 01-01 00:00:03.649][1] SMBCHG: battchg_suspend: 2 voting for 0 - off
1682<6>[ 4.940242 / 01-01 00:00:04.939][3] FG: update_battery_type: battery_id : 187
1683<6>[ 4.940256 / 01-01 00:00:04.939][3] of_batterydata_get_best_profile: LGE_BL44E1F_LGC_3200mAh found
1684<6>[ 4.945203 / 01-01 00:00:04.939][3] FG: fg_set_minfreq: Set minfreq enable
1685<6>[ 4.945254 / 01-01 00:00:04.939][3] FG: fg_batt_profile_init: vbat_est_diff = 11901, v_current_pred: 4325231, v:4337132
1686<6>[ 4.946751 / 01-01 00:00:04.939][3] FG: fg_set_minfreq: Set minfreq disable
1687<3>[ 4.946759 / 01-01 00:00:04.939][3] vote: name[SMBCHG: battchg_suspend], client_id[0], state[0], val[0]
1688<7>[ 4.946765 / 01-01 00:00:04.939][3] SMBCHG: battchg_suspend: 0 voting for 0 - off
1689<6>[ 4.952200 / 01-01 00:00:04.949][3] FG: fg_batt_profile_init: soc:[100], voltage:[4337132], ocv:[4365971], current:[297239], batt_temp:[285],cycle_count : [0], residence : [119201]
1690<3>[ 4.952360 / 01-01 00:00:04.949][3] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
1691<7>[ 4.952366 / 01-01 00:00:04.949][3] SMBCHG: battchg_suspend: votes unchanged; skipping
1692<3>[ 4.952421 / 01-01 00:00:04.949][3] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
1693<3>[ 4.952459 / 01-01 00:00:04.949][3] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[0]
1694<7>[ 4.952464 / 01-01 00:00:04.949][3] SMBCHG: usb_icl: votes unchanged; skipping
1695<6>[ 4.961427 / 01-01 00:00:04.959][3] FG: update_sram_data: soc:[100], soc_raw[9966], voltage:[4337132], ocv:[4365971], current:[296323], batt_temp:[285], charge_raw [3154387 / 3167000]
1696<6>[ 10.240073 / 01-01 00:00:10.239][1] pet_watchdog [enable : 1, jiffies : 4294938320, delay_time : 1000]
1697<6>[ 20.260131 / 01-01 00:00:20.259][1] pet_watchdog [enable : 1, jiffies : 4294939322, delay_time : 1000]
1698<6>[ 30.280117 / 01-01 00:00:30.279][1] pet_watchdog [enable : 1, jiffies : 4294940324, delay_time : 1000]
1699<6>[ 31.120046 / 01-01 00:00:31.119][0] Calling earjack_debugger_set_uart
1700<6>[ 35.047780 / 01-01 00:00:35.039][3] FG: update_sram_data: soc:[100], soc_raw[9960], voltage:[4333013], ocv:[4365971], current:[294035], batt_temp:[282], charge_raw [3151858 / 3167000]
1701<6>[ 40.300121 / 01-01 00:00:40.299][1] pet_watchdog [enable : 1, jiffies : 4294941326, delay_time : 1000]
1702<6>[ 50.320115 / 01-01 00:00:50.319][1] pet_watchdog [enable : 1, jiffies : 4294942328, delay_time : 1000]
1703<6>[ 60.340119 / 01-01 00:01:00.339][1] pet_watchdog [enable : 1, jiffies : 4294943330, delay_time : 1000]
1704<3>[ 61.920106 / 01-01 00:01:01.919][2] anx7688-usbc 6-0028: request_firmware failed -11
1705<3>[ 61.920115 / 01-01 00:01:01.919][2] anx7688-usbc 6-0028: firmware alloc failed
1706<6>[ 61.920621 / 01-01 00:01:01.919][2] anx7688-usbc 6-0028: VID: 0xaaaa PID: 0x7688 HWREV: 0xac STDALN FW: 0x208b
1707<3>[ 61.924822 / 01-01 00:01:01.919][2] anx7688-usbc 6-0028: fail to request firmware
1708<0>[ 61.924842 / 01-01 00:01:01.919][2] bus probe : 1703 anx7688-usbc 60220
1709<4>[ 61.924941 / 01-01 00:01:01.919][2] anx7688-usbc: probe of 6-0028 failed with error -12
1710<6>[ 61.927966 / 01-01 00:01:01.919][3] Creating CPU group 0
1711<6>[ 61.927976 / 01-01 00:01:01.919][3] Init CPU0 state
1712<6>[ 61.927981 / 01-01 00:01:01.919][3] Init CPU1 state
1713<6>[ 61.928094 / 01-01 00:01:01.919][3] Creating CPU group 2
1714<6>[ 61.928100 / 01-01 00:01:01.919][3] Init CPU2 state
1715<6>[ 61.928104 / 01-01 00:01:01.919][3] Init CPU3 state
1716<5>[ 61.928339 / 01-01 00:01:01.919][3] Loading compiled-in X.509 certificates
1717<5>[ 61.928414 / 01-01 00:01:01.919][3] random: nonblocking pool is initialized
1718<5>[ 61.928742 / 01-01 00:01:01.919][2] Key type encrypted registered
1719<3>[ 61.948129 / 01-01 00:01:01.939][3] Unable to find log_buf by kallsyms!
1720<6>[ 61.949391 / 01-01 00:01:01.939][2] monitor-thermal soc:lge,monitor-thermal: LGE monitor thermal Initialized
1721<6>[ 61.950192 / 01-01 00:01:01.949][2] power_sysfs_parse_dt : Total sysfs node is 57
1722<6>[ 61.950215 / 01-01 00:01:01.949][2] power_sysfs_parse_dt : xo_therm path is mandatory
1723<6>[ 61.950223 / 01-01 00:01:01.949][2] power_sysfs_parse_dt : batt_therm path is mandatory
1724<6>[ 61.950293 / 01-01 00:01:01.949][2] power_sysfs_parse_dt : health path is mandatory
1725<6>[ 61.950319 / 01-01 00:01:01.949][2] power_sysfs_parse_dt : status path is mandatory
1726<6>[ 61.950629 / 01-01 00:01:01.949][2] power_sysfs_make_path : pa_therm0 user node didn't have kernel node
1727<6>[ 61.950658 / 01-01 00:01:01.949][2] power_sysfs_make_path : ac_online user node didn't have kernel node
1728<6>[ 61.950666 / 01-01 00:01:01.949][2] power_sysfs_make_path : wlc_online user node didn't have kernel node
1729<6>[ 61.950678 / 01-01 00:01:01.949][2] power_sysfs_make_path : iusb_control user node didn't have kernel node
1730<6>[ 61.950685 / 01-01 00:01:01.949][2] power_sysfs_make_path : wlc_thermal_mitigation user node didn't have kernel node
1731<6>[ 61.950708 / 01-01 00:01:01.949][2] power_sysfs_make_path : speed_bin user node didn't have kernel node
1732<6>[ 61.950714 / 01-01 00:01:01.949][2] power_sysfs_make_path : pvs_bin user node didn't have kernel node
1733<6>[ 61.950732 / 01-01 00:01:01.949][2] power_sysfs_probe : Success Power sysfs Init
1734<6>[ 61.950931 / 01-01 00:01:01.949][2] lge_boost_bypass_init : start
1735<3>[ 61.951387 / 01-01 00:01:01.949][2] lge_boost_bypass_probe : probe
1736<3>[ 61.951396 / 01-01 00:01:01.949][2] lge_boost_bypass_parse_dt : name = pmi8994_boostbypass / volt = 3600000/3400000
1737<3>[ 61.951441 / 01-01 00:01:01.949][2] lge_boost_bypass_regulator_setup : regulator exist
1738<3>[ 61.951447 / 01-01 00:01:01.949][2] lge_boost_bypass_regulator_setup : vote boost bypass set to on
1739<3>[ 61.951583 / 01-01 00:01:01.949][2] lge_boost_bypass_probe : success
1740<6>[ 61.952201 / 01-01 00:01:01.949][3] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
1741<6>[ 61.952272 / 01-01 00:01:01.949][3] adsprpc: channel link type: 0
1742<6>[ 61.964183 / 01-01 00:01:01.959][3] RNDIS_IPA module is loaded.
1743<6>[ 61.964717 / 01-01 00:01:01.959][3] android_usb 66bf0c8.android_usb: device tree enabled
1744<6>[ 61.964896 / 01-01 00:01:01.959][3] usb_gadget_probe_driver
1745<6>[ 61.964903 / 01-01 00:01:01.959][3] gadget name udc->gadget->name dwc3-gadget
1746<6>[ 61.964908 / 01-01 00:01:01.959][3]
1747<6>[ 61.964908 / 01-01 00:01:01.959][3] ********************************************
1748<6>[ 61.964912 / 01-01 00:01:01.959][3]
1749<6>[ 61.964912 / 01-01 00:01:01.959][3] No of UDCs: 1
1750<6>[ 61.964921 / 01-01 00:01:01.959][3] driver->function: android_usb
1751<6>[ 61.964923 / 01-01 00:01:01.959][3]
1752<6>[ 61.964923 / 01-01 00:01:01.959][3] ********************************************
1753<6>[ 61.964932 / 01-01 00:01:01.959][3] udc->gadget->usb_core_id : 0
1754<6>[ 61.964934 / 01-01 00:01:01.959][3]
1755<6>[ 61.964934 / 01-01 00:01:01.959][3] driver->usb_core_id: 0
1756<6>[ 61.964984 / 01-01 00:01:01.959][3] file system registered
1757<6>[ 61.965015 / 01-01 00:01:01.959][3] mbim_init: initialize 1 instances
1758<6>[ 61.965055 / 01-01 00:01:01.959][3] mbim_init: Initialized 1 ports
1759<6>[ 61.965782 / 01-01 00:01:01.959][3] rndis_qc_init: initialize rndis QC instance
1760<6>[ 61.965898 / 01-01 00:01:01.959][3] Number of LUNs=8
1761<6>[ 61.965907 / 01-01 00:01:01.959][3] Mass Storage Function, version: 2009/09/11
1762<6>[ 61.965913 / 01-01 00:01:01.959][3] LUN: removable file: (no medium)
1763<6>[ 61.965926 / 01-01 00:01:01.959][3] Number of LUNs=1
1764<6>[ 61.965950 / 01-01 00:01:01.959][3] LUN: removable file: (no medium)
1765<6>[ 61.965955 / 01-01 00:01:01.959][3] Number of LUNs=1
1766<6>[ 61.966128 / 01-01 00:01:01.959][3] evp_setup: evp_setup:
1767<6>[ 61.966135 / 01-01 00:01:01.959][3] evp_get_product_string: evp_get_product_string: evp convert string, maxV=07E, minV=03C, feature=08
1768<6>[ 61.966141 / 01-01 00:01:01.959][3] evp_get_product_string: evp_get_product_string: strings_evp = Maxim EVP gr8rFiV8US07E03C08
1769<6>[ 61.966147 / 01-01 00:01:01.959][3] android_usb gadget: android_usb ready
1770<6>[ 61.966153 / 01-01 00:01:01.959][3] udc->gadget->name: dwc3-gadget
1771<3>[ 61.968367 / 01-01 00:01:01.959][3] hallic_dev switch registration success
1772<6>[ 61.968490 / 01-01 00:01:01.959][3] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input2
1773<6>[ 61.969615 / 01-03 17:36:27.500][3] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 2016-01-03 17:36:27 UTC (1451842587)
1774<3>[ 61.972864 / 01-03 17:36:27.500][3] power_supply_callback: BCL state of SoC is 1
1775<6>[ 61.977533 / 01-03 17:36:27.500][1] lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
1776<6>[ 61.977817 / 01-03 17:36:27.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
1777<6>[ 61.978003 / 01-03 17:36:27.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
1778<6>[ 61.978172 / 01-03 17:36:27.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
1779<6>[ 61.978336 / 01-03 17:36:27.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
1780<6>[ 61.978501 / 01-03 17:36:27.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
1781<6>[ 61.978673 / 01-03 17:36:27.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
1782<6>[ 61.978839 / 01-03 17:36:27.500][0] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
1783<6>[ 61.982099 / 01-03 17:36:27.509][0] vts_probe: vts: xo_therm is registered. chan=114, weight=500
1784<6>[ 61.982113 / 01-03 17:36:27.509][0] vts_probe: vts: bd_therm_2 is registered. chan=116, weight=270
1785<6>[ 61.982124 / 01-03 17:36:27.509][0] vts_probe: vts: Add 2 adc(s).
1786<6>[ 61.982132 / 01-03 17:36:27.509][0] vts_probe: vts: probe done.
1787<6>[ 61.982194 / 01-03 17:36:27.509][0] vts_probe: led_sensor: All of adc sensors are disabled.
1788<6>[ 61.982363 / 01-03 17:36:27.509][0] vts_probe: led_sensor: Add 0 adc(s).
1789<6>[ 61.982372 / 01-03 17:36:27.509][0] vts_probe: led_sensor: probe done.
1790<3>[ 61.982840 / 01-03 17:36:27.509][0] gpio_keys_gpio_report_event: code(115) state(0)
1791<3>[ 61.982855 / 01-03 17:36:27.509][0] gpio_keys_gpio_report_event: code(222) state(0)
1792<3>[ 61.984017 / 01-03 17:36:27.509][0] parse_cpu_levels: idx 1 545
1793<3>[ 61.984028 / 01-03 17:36:27.509][0] parse_cpu_levels: idx 2 6022
1794<3>[ 61.984036 / 01-03 17:36:27.509][0] parse_cpu_levels: idx 2 11499
1795<3>[ 61.984495 / 01-03 17:36:27.509][0] parse_cpu_levels: idx 1 545
1796<3>[ 61.984504 / 01-03 17:36:27.509][0] parse_cpu_levels: idx 2 6022
1797<3>[ 61.984511 / 01-03 17:36:27.509][0] parse_cpu_levels: idx 2 11499
1798<3>[ 61.988142 / 01-03 17:36:27.509][2] qcom,qpnp-flash-led qpnp-flash-led-26: Unable to acquire pinctrl
1799<6>[ 61.990688 / 01-03 17:36:27.519][2] rmnet_ipa started initialization
1800<6>[ 61.990705 / 01-03 17:36:27.519][2] IPA SSR support = True
1801<6>[ 61.990717 / 01-03 17:36:27.519][2] IPA ipa-loaduC = True
1802<6>[ 61.990731 / 01-03 17:36:27.519][2] IPA SG support = True
1803<3>[ 61.992383 / 01-03 17:36:27.519][3] ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
1804<3>[ 61.992395 / 01-03 17:36:27.519][3] ipa ipa2_uc_state_check:301 uC is not loaded
1805<6>[ 61.993077 / 01-03 17:36:27.519][3] rmnet_ipa completed initialization
1806<6>[ 61.998663 / 01-03 17:36:27.519][3] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1807<6>[ 61.999517 / 01-03 17:36:27.519][3] usb_otg_vreg: disabling
1808<6>[ 61.999593 / 01-03 17:36:27.519][3] gdsc_mmagic_bimc: disabling
1809<6>[ 61.999635 / 01-03 17:36:27.519][3] kryo1-retention: disabling
1810<6>[ 61.999642 / 01-03 17:36:27.519][3] kryo0-retention: disabling
1811<6>[ 61.999647 / 01-03 17:36:27.519][3] gfx_mem_acc_corner: disabling
1812<6>[ 61.999652 / 01-03 17:36:27.519][3] apcc_l3_mem_acc_corner: disabling
1813<6>[ 61.999657 / 01-03 17:36:27.519][3] apc1_perfcl_mem_acc_corner: disabling
1814<6>[ 61.999663 / 01-03 17:36:27.519][3] apc0_pwrcl_mem_acc_corner: disabling
1815<6>[ 61.999671 / 01-03 17:36:27.519][3] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1816<4>[ 61.999956 / 01-03 17:36:27.519][3] dhd_module_init in
1817<4>[ 62.000252 / 01-03 17:36:27.529][3] found wifi platform device bcmdhd_wlan
1818<4>[ 62.000750 / 01-03 17:36:27.529][3] Power-up adapter 'DHD generic adapter'
1819<4>[ 62.000759 / 01-03 17:36:27.529][3] wifi_platform_set_power = 1
1820<4>[ 62.000791 / 01-03 17:36:27.529][3] [BRCM]: gpio_direction_output(1011,1)! ret = 0
1821<6>[ 62.006033 / 01-03 17:36:27.529][0] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
1822<6>[ 62.009574 / 01-03 17:36:27.529][0] msm_pcie_enable: PCIe RC0 PHY is ready!
1823<6>[ 62.019667 / 01-03 17:36:27.539][0] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
1824<6>[ 62.055065 / 01-03 17:36:27.579][0] msm_pcie_enable: PCIe RC0 link initialized
1825<6>[ 62.055168 / 01-03 17:36:27.579][0] PCI host bridge /soc/qcom,pcie@00600000 ranges:
1826<6>[ 62.055182 / 01-03 17:36:27.579][0] No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
1827<6>[ 62.055200 / 01-03 17:36:27.579][0] IO 0x0c200000..0x0c2fffff -> 0x0c200000
1828<6>[ 62.055212 / 01-03 17:36:27.579][0] MEM 0x0c300000..0x0cffffff -> 0x0c300000
1829<6>[ 62.065339 / 01-03 17:36:27.589][0] pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
1830<6>[ 62.065352 / 01-03 17:36:27.589][0] pci_bus 0000:00: root bus resource [bus 00-ff]
1831<6>[ 62.065363 / 01-03 17:36:27.589][0] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
1832<6>[ 62.065372 / 01-03 17:36:27.589][0] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
1833<7>[ 62.065397 / 01-03 17:36:27.589][0] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
1834<3>[ 62.065428 / 01-03 17:36:27.589][0] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
1835<7>[ 62.065438 / 01-03 17:36:27.589][0] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
1836<3>[ 62.065463 / 01-03 17:36:27.589][0] pci 0000:00:00.0: IOMMU is currently not supported for PCI
1837<7>[ 62.065496 / 01-03 17:36:27.589][0] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
1838<3>[ 62.065532 / 01-03 17:36:27.589][0] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
1839<6>[ 62.065823 / 01-03 17:36:27.589][0] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
1840<7>[ 62.066077 / 01-03 17:36:27.589][0] pci 0000:01:00.0: [14e4:43e9] type 00 class 0x028000
1841<3>[ 62.066214 / 01-03 17:36:27.589][0] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
1842<7>[ 62.066224 / 01-03 17:36:27.589][0] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
1843<3>[ 62.066304 / 01-03 17:36:27.589][0] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x001c[4] is all FFs
1844<7>[ 62.066312 / 01-03 17:36:27.589][0] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
1845<3>[ 62.066428 / 01-03 17:36:27.589][0] pci 0000:01:00.0: IOMMU is currently not supported for PCI
1846<7>[ 62.066603 / 01-03 17:36:27.589][0] pci 0000:01:00.0: supports D1 D2
1847<7>[ 62.066610 / 01-03 17:36:27.589][0] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
1848<7>[ 62.066876 / 01-03 17:36:27.589][0] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
1849<3>[ 62.067035 / 01-03 17:36:27.589][0] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
1850<6>[ 62.067053 / 01-03 17:36:27.589][0] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c9fffff]
1851<6>[ 62.067063 / 01-03 17:36:27.589][0] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
1852<6>[ 62.067082 / 01-03 17:36:27.589][0] pci 0000:01:00.0: BAR 2: assigned [mem 0x0c400000-0x0c7fffff 64bit]
1853<6>[ 62.067267 / 01-03 17:36:27.589][0] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c800000-0x0c807fff 64bit]
1854<6>[ 62.067344 / 01-03 17:36:27.589][0] pci 0000:00:00.0: PCI bridge to [bus 01]
1855<6>[ 62.067374 / 01-03 17:36:27.589][0] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c9fffff]
1856<3>[ 62.150806 / 01-03 17:36:27.679][3] bcm_wifi_set_power: wifi power successed to pull up
1857<4>[ 62.150813 / 01-03 17:36:27.679][3] wifi_platform_bus_enumerate device present 1
1858<3>[ 62.150820 / 01-03 17:36:27.679][3] msm_pcie_enumerate: PCIe: RC0 has already been enumerated.
1859<4>[ 62.150825 / 01-03 17:36:27.679][3] [BRCM] Card detect done
1860<4>[ 62.150859 / 01-03 17:36:27.679][3] PCI_PROBE: bus 1, slot 0,vendor 14E4, device 43E9(good PCI location)
1861<4>[ 62.150867 / 01-03 17:36:27.679][3] dhdpcie_init: found adapter info 'DHD generic adapter'
1862<4>[ 62.150879 / 01-03 17:36:27.679][3] alloc static buf at ffffffc0f5540000!
1863<6>[ 62.151258 / 01-03 17:36:27.679][3] pcieh 0000:01:00.0: enabling device (0000 -> 0002)
1864<4>[ 62.152467 / 01-03 17:36:27.679][3] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
1865<3>[ 62.152474 / 01-03 17:36:27.679][3] request DHD_INFO size(25600) is bigger than static size(24576).
1866<4>[ 62.152479 / 01-03 17:36:27.679][3] wifi_platform_prealloc: failed to alloc static mem section 7
1867<4>[ 62.152487 / 01-03 17:36:27.679][3] wifi_platform_get_mac_addr
1868<6>[ 62.152495 / 01-03 17:36:27.679][3] [bcm_wifi_get_mac_addr] Exiting. MyMac : 0 : 90 : 4c : 6c : 2e :59
1869<6>[ 62.152565 / 01-03 17:36:27.679][3] CFG80211-INFO2) wl_setup_wiphy : Registering Vendor80211
1870<4>[ 62.152837 / 01-03 17:36:27.679][3] wl_create_event_handler(): thread:wl_event_handler:195 started
1871<6>[ 62.152845 / 01-03 17:36:27.679][2] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xffffffc0f4e1ccf0
1872<4>[ 62.152987 / 01-03 17:36:27.679][3] dhd_attach(): thread:dhd_watchdog_thread:196 started
1873<4>[ 62.153043 / 01-03 17:36:27.679][3] dhd_attach(): thread:dhd_rpm_state_thread:197 started
1874<4>[ 62.153053 / 01-03 17:36:27.679][3] dhd_deferred_work_init: work queue initialized
1875<4>[ 62.153059 / 01-03 17:36:27.679][3] DHD LOAD BALANCING Enabled
1876<4>[ 62.153508 / 01-03 17:36:27.679][3] Dongle Host Driver, version 1.78.5 (r)
1877<4>[ 62.153508 / 01-03 17:36:27.679][3] Compiled in drivers/net/wireless/bcmdhd on 3.18.31-twrp-h918-1.0
1878<4>[ 62.153756 / 01-03 17:36:27.679][3] Register interface [wlan0] MAC: 00:90:4c:f5:11:e6
1879<4>[ 62.153756 / 01-03 17:36:27.679][3]
1880<6>[ 62.153776 / 01-03 17:36:27.679][2] CFG80211-INFO2) wl_event_handler : was terminated
1881<4>[ 62.153795 / 01-03 17:36:27.679][3] wl_destroy_event_handler(): thread:wl_event_handler:195 terminated OK
1882<4>[ 62.153802 / 01-03 17:36:27.679][3] dhd_wl_ioctl: returning as busstate=0
1883<4>[ 62.153808 / 01-03 17:36:27.679][3] dhd_bus_devreset: == Power OFF ==
1884<4>[ 62.153819 / 01-03 17:36:27.679][3] dhdpcie_oob_intr_unregister: irq is not registered
1885<6>[ 62.164289 / 01-03 17:36:27.689][3] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
1886<4>[ 62.165397 / 01-03 17:36:27.689][3] dhd_bus_devreset: WLAN OFF Done
1887<4>[ 62.165404 / 01-03 17:36:27.689][3] wifi_platform_set_power = 0
1888<4>[ 62.165435 / 01-03 17:36:27.689][3] [BRCM]: gpio_direction_output(1011,0)! ret = 0
1889<3>[ 62.165440 / 01-03 17:36:27.689][3] bcm_wifi_set_power: wifi power successed to pull down
1890<0>[ 62.165478 / 01-03 17:36:27.689][3] drv probe : 62000 bcmdhd_wlan 164
1891<4>[ 62.165564 / 01-03 17:36:27.689][3] dhd_module_init out
1892<6>[ 62.168615 / 01-03 17:36:27.689][2] clock_late_init: Removing enables held for handed-off clocks
1893<6>[ 62.173099 / 01-03 17:36:27.699][2] ALSA device list:
1894<6>[ 62.173111 / 01-03 17:36:27.699][2] No soundcards found.
1895<6>[ 62.173566 / 01-03 17:36:27.699][2] Freeing unused kernel memory: 508K (ffffffc001266000 - ffffffc0012e5000)
1896<6>[ 62.173582 / 01-03 17:36:27.699][2] Freeing alternatives memory: 80K (ffffffc0012e5000 - ffffffc0012f9000)
1897<5>[ 62.173588 / 01-03 17:36:27.699][2] [CCAudit] Run init process for OS startup
1898<13>[ 62.174340 / 01-03 17:36:27.699][2] init: init started!
1899<7>[ 62.175896 / 01-03 17:36:27.699][2] SELinux: 2048 avtab hash slots, 4857 rules.
1900<6>[ 62.175934 / 01-03 17:36:27.699][2] SELinux: Android master kernel running Android M policy in compatibility mode.
1901<7>[ 62.176680 / 01-03 17:36:27.699][2] SELinux: 2048 avtab hash slots, 4857 rules.
1902<7>[ 62.176692 / 01-03 17:36:27.699][2] SELinux: 1 users, 2 roles, 530 types, 0 bools, 1 sens, 1024 cats
1903<7>[ 62.176698 / 01-03 17:36:27.699][2] SELinux: 87 classes, 4857 rules
1904<6>[ 62.177132 / 01-03 17:36:27.699][2] SELinux: Permission audit_read in class capability2 not defined in policy.
1905<6>[ 62.177150 / 01-03 17:36:27.699][2] SELinux: Class can_socket not defined in policy.
1906<6>[ 62.177155 / 01-03 17:36:27.699][2] SELinux: the above unknown classes and permissions will be denied
1907<7>[ 62.177180 / 01-03 17:36:27.699][2] SELinux: Completing initialization.
1908<7>[ 62.177184 / 01-03 17:36:27.699][2] SELinux: Setting up existing superblocks.
1909<7>[ 62.177195 / 01-03 17:36:27.699][2] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1910<7>[ 62.177214 / 01-03 17:36:27.699][2] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
1911<7>[ 62.177642 / 01-03 17:36:27.699][2] SELinux: initialized (dev bdev, type bdev), not configured for labeling
1912<7>[ 62.177652 / 01-03 17:36:27.699][2] SELinux: initialized (dev proc, type proc), uses genfs_contexts
1913<7>[ 62.177669 / 01-03 17:36:27.699][2] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
1914<7>[ 62.204335 / 01-03 17:36:27.729][2] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
1915<7>[ 62.204351 / 01-03 17:36:27.729][2] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
1916<7>[ 62.204359 / 01-03 17:36:27.729][2] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
1917<7>[ 62.204367 / 01-03 17:36:27.729][2] SELinux: initialized (dev aio, type aio), not configured for labeling
1918<7>[ 62.204375 / 01-03 17:36:27.729][2] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
1919<7>[ 62.204391 / 01-03 17:36:27.729][2] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
1920<7>[ 62.204450 / 01-03 17:36:27.729][2] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1921<7>[ 62.204467 / 01-03 17:36:27.729][2] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
1922<5>[ 62.207744 / 01-03 17:36:27.729][3] audit: type=1403 audit(1451842587.729:2): policy loaded auid=4294967295 ses=4294967295
1923<13>[ 62.208066 / 01-03 17:36:27.729][3] init: (Initializing SELinux non-enforcing took 0.03s.)
1924<13>[ 62.211037 / 01-03 17:36:27.739][3] init: init second stage started!
1925<11>[ 62.211275 / 01-03 17:36:27.739][3] init: property_set("ro.boot.bootdevice", "624000.ufshc") failed
1926<11>[ 62.619540 / 01-03 17:36:28.139][3] init: waitpid failed: No child processes
1927<13>[ 62.619794 / 01-03 17:36:28.139][3] init: (Loading properties from /default.prop took 0.00s.)
1928<11>[ 62.620242 / 01-03 17:36:28.149][3] init: /init.rc: 62: invalid command 'load_all_props'
1929<11>[ 62.620304 / 01-03 17:36:28.149][3] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
1930<13>[ 62.620367 / 01-03 17:36:28.149][3] init: (Parsing /init.recovery.usb.rc took 0.00s.)
1931<13>[ 62.620404 / 01-03 17:36:28.149][3] init: (Parsing /init.recovery.service.rc took 0.00s.)
1932<13>[ 62.620447 / 01-03 17:36:28.149][3] init: (Parsing /init.recovery.elsa.rc took 0.00s.)
1933<13>[ 62.620460 / 01-03 17:36:28.149][3] init: (Parsing /init.rc took 0.00s.)
1934<5>[ 62.620533 / 01-03 17:36:28.149][3] audit: type=1400 audit(1451842588.149:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
1935<5>[ 62.620583 / 01-03 17:36:28.149][3] audit: type=1400 audit(1451842588.149:4): avc: denied { setcurrent } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
1936<5>[ 62.620602 / 01-03 17:36:28.149][3] audit: type=1400 audit(1451842588.149:5): avc: denied { dyntransition } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
1937<11>[ 62.620632 / 01-03 17:36:28.149][3] init: SELinux: Could not get canonical path /postinstall restorecon: No such file or directory.
1938<13>[ 62.620663 / 01-03 17:36:28.149][3] init: Starting service 'ueventd'...
1939<13>[ 62.620829 / 01-03 17:36:28.149][3] init: Starting service 'healthd'...
1940<13>[ 62.620962 / 01-03 17:36:28.149][3] init: Waiting for /dev/.coldboot_done...
1941<13>[ 62.622271 / 01-03 17:36:28.149][2] ueventd: ueventd started!
1942<6>[ 62.899665 / 01-03 17:36:28.419][3] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
1943<11>[ 63.629114 / 01-03 17:36:29.149][0] init: Timed out waiting for /dev/.coldboot_done
1944<13>[ 63.629156 / 01-03 17:36:29.149][0] init: Waiting for /dev/.coldboot_done took 1.01s.
1945<7>[ 63.630511 / 01-03 17:36:29.159][0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1946<6>[ 63.630869 / 01-03 17:36:29.159][0] android_usb android0: LGE-USB request function list: mtp,adb
1947<5>[ 63.630958 / 01-03 17:36:29.159][0] audit: type=1400 audit(1451842589.159:6): avc: denied { write } for pid=1 comm="init" name="lun0" dev="sysfs" ino=42896 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
1948<13>[ 63.630985 / 01-03 17:36:29.159][0] init: write_file: Unable to open '/sys/devices/soc/6a00000.ssusb/6a00000.dwc3/gadget/lun0/cdrom': Permission denied
1949<7>[ 63.631746 / 01-03 17:36:29.159][0] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
1950<7>[ 63.632310 / 01-03 17:36:29.159][0] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
1951<13>[ 63.632384 / 01-03 17:36:29.159][0] init: (Loading properties from /system/build.prop took 0.00s.)
1952<13>[ 63.632415 / 01-03 17:36:29.159][0] init: (Loading properties from /vendor/build.prop took 0.00s.)
1953<13>[ 63.632441 / 01-03 17:36:29.159][0] init: (Loading properties from /factory/factory.prop took 0.00s.)
1954<13>[ 63.638227 / 01-03 17:36:29.159][0] init: (Loading properties from /data/local.prop took 0.00s.)
1955<11>[ 63.638262 / 01-03 17:36:29.159][0] init: Unable to open persistent property directory "/data/property": No such file or directory
1956<13>[ 63.638646 / 01-03 17:36:29.159][0] init: Starting service 'set_permissive'...
1957<13>[ 63.638867 / 01-03 17:36:29.159][0] init: Starting service 'recovery'...
1958<13>[ 63.639477 / 01-03 17:36:29.159][0] init: write_file: Unable to open '/sys/devices/platform/lge_android_usb/model_name': No such file or directory
1959<6>[ 63.640173 / 01-03 17:36:29.169][0] lge,blmap-ex: br_lvl(0) -> bl_lvl(0)
1960<6>[ 63.640279 / 01-03 17:36:29.169][0] android_usb android0: gadget enable(0)
1961<3>[ 63.640292 / 01-03 17:36:29.169][0] enable_store: android_usb: already disabled
1962<6>[ 63.640387 / 01-03 17:36:29.169][0] android_usb android0: gadget enable(0)
1963<6>[ 63.640426 / 01-03 17:36:29.169][0] android_usb android0: LGE-USB request function list: mtp,adb
1964<6>[ 63.640468 / 01-03 17:36:29.169][0] android_usb android0: gadget enable(1)
1965<6>[ 63.640478 / 01-03 17:36:29.169][0] ffs_function_enable: ffs_function_enable: config->opened(0)
1966<6>[ 63.640487 / 01-03 17:36:29.169][0] android_disable: android_disable: checked disable_depth(1)
1967<6>[ 63.640495 / 01-03 17:36:29.169][0] android_enable: android_enable: checked disable_depth(2)
1968<13>[ 63.640529 / 01-03 17:36:29.169][0] init: Starting service 'adbd'...
1969<6>[ 63.640808 / 01-03 17:36:29.169][0] android_usb android0: gadget enable(0)
1970<6>[ 63.640825 / 01-03 17:36:29.169][0] android_disable: android_disable: checked disable_depth(1)
1971<6>[ 63.640836 / 01-03 17:36:29.169][0] ffs_function_disable: ffs_function_disable: config->opened(0)
1972<6>[ 63.640844 / 01-03 17:36:29.169][0] android_enable: android_enable: checked disable_depth(2)
1973<13>[ 63.640869 / 01-03 17:36:29.169][0] init: Service 'adbd' is being killed...
1974<6>[ 63.640928 / 01-03 17:36:29.169][0] android_usb android0: gadget enable(1)
1975<6>[ 63.640940 / 01-03 17:36:29.169][0] ffs_function_enable: ffs_function_enable: config->opened(0)
1976<6>[ 63.640949 / 01-03 17:36:29.169][0] android_disable: android_disable: checked disable_depth(1)
1977<6>[ 63.640958 / 01-03 17:36:29.169][0] android_enable: android_enable: checked disable_depth(2)
1978<6>[ 63.644465 / 01-03 17:36:29.169][3] read descriptors
1979<6>[ 63.644508 / 01-03 17:36:29.169][3] read strings
1980<6>[ 63.644527 / 01-03 17:36:29.169][3] functionfs_ready_callback: functionfs_ready_callback: config->enabled(1), dev(ffffffc040e2fc00)
1981<6>[ 63.644534 / 01-03 17:36:29.169][3] android_enable: android_enable: checked disable_depth(1)
1982<6>[ 63.644541 / 01-03 17:36:29.169][3] mtp_bind_config
1983<6>[ 63.645647 / 01-03 17:36:29.169][3] dwc3_gadget_run_stop Queue DCP check work! 0
1984<5>[ 63.648470 / 01-03 17:36:29.169][3] audit: type=1400 audit(1451842589.169:7): avc: denied { write } for pid=415 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
1985<13>[ 63.649234 / 01-03 17:36:29.169][0] init: Service 'set_permissive' (pid 411) exited with status 0
1986<13>[ 63.649250 / 01-03 17:36:29.169][2] ueventd: Coldboot took 1.02s.
1987<6>[ 63.657121 / 01-03 17:36:29.179][3] lge,blmap: br_lvl(149) -> bl_lvl(793)
1988<6>[ 63.657136 / 01-03 17:36:29.179][3] mdss_fb_set_backlight: [AOD] Save unset_bl_level(793) in U3 mode. Will be updated when kick off function
1989<11>[ 63.657596 / 01-03 17:36:29.179][0] init: avc: denied { set } for property=twrp.crash_counter scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
1990<6>[ 63.658370 / 01-03 17:36:29.179][3] lge,blmap: br_lvl(149) -> bl_lvl(793)
1991<6>[ 63.658381 / 01-03 17:36:29.179][3] mdss_fb_set_backlight: [AOD] Save unset_bl_level(793) in U3 mode. Will be updated when kick off function
1992<6>[ 63.658453 / 01-03 17:36:29.179][3] mdss_fb_blank_sub: [Display] mdss_fb_open+0x178/0x1c4 mode:0
1993<3>[ 63.658607 / 01-03 17:36:29.179][3] mdss_fb_blank_sub: mdss_fb_blank_sub: -
1994<6>[ 63.658650 / 01-03 17:36:29.179][3] mdss_fb_set_backlight: [AOD] Save unset_bl_level(0) in U3 mode. Will be updated when kick off function
1995<6>[ 63.658657 / 01-03 17:36:29.179][3] [AOD] Disable AOD mode when shutdown
1996<6>[ 63.658664 / 01-03 17:36:29.179][3] mdss_fb_blank_sub: [Display] mdss_fb_release_all+0x294/0x36c mode:4
1997<6>[ 63.658701 / 01-03 17:36:29.179][3] mdss_fb_set_backlight: [AOD] Save unset_bl_level(0) in U3 mode. Will be updated when kick off function
1998<3>[ 63.658719 / 01-03 17:36:29.179][3] mdss_fb_blank_sub: mdss_fb_blank_sub: -
1999<6>[ 63.659054 / 01-03 17:36:29.179][3] mdss_fb_blank_sub: [Display] mdss_fb_open+0x178/0x1c4 mode:0
2000<3>[ 63.659130 / 01-03 17:36:29.179][3] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2001<6>[ 63.681199 / 01-03 17:36:29.209][3] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xe0/0xe8 mode:4
2002<6>[ 63.681256 / 01-03 17:36:29.209][3] mdss_fb_set_backlight: [AOD] Save unset_bl_level(0) in U3 mode. Will be updated when kick off function
2003<3>[ 63.681284 / 01-03 17:36:29.209][2] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2004<6>[ 63.681287 / 01-03 17:36:29.209][2] [Touch] FB_BLANK
2005<6>[ 63.681315 / 01-03 17:36:29.209][2] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xe0/0xe8 mode:0
2006<3>[ 63.681412 / 01-03 17:36:29.209][2] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2007<6>[ 63.681415 / 01-03 17:36:29.209][2] [Touch] FB_UNBLANK
2008<3>[ 63.692437 / 01-03 17:36:29.219][3] [Display] mdss_dsi_on+: ctrl=ffffffc0759f6018 ndx=0 cur_power_state=1
2009<3>[ 63.692441 / 01-03 17:36:29.219][3] [Display] mdss_dsi_on-:
2010<3>[ 63.692450 / 01-03 17:36:29.219][3] [Display] mdss_dsi_unblank+: ctrl=ffffffc0759f6018 ndx=0 cur_power_state=1 ctrl_state=7
2011<3>[ 63.693184 / 01-03 17:36:29.219][3] [Display] mdss_dsi_unblank-:
2012<6>[ 63.717649 / 01-03 17:36:29.239][2] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xe0/0xe8 mode:4
2013<6>[ 63.717652 / 01-03 17:36:29.239][2] [AOD][START]cur_mode : 3, blank mode : 4, aod_node : 0, keep_aod : 3
2014<6>[ 63.717654 / 01-03 17:36:29.239][2] [AOD][END] cmd_status : 4, next_mode : 0 labibb_ctrl : ctrl
2015<6>[ 63.718157 / 01-03 17:36:29.239][2] [LCD][LM3697] lm3697_set_main_current_level : backlight level=0, cal_value=0
2016<6>[ 63.730042 / 01-03 17:36:29.259][2] lm3697_backlight_off
2017<3>[ 63.751698 / 01-03 17:36:29.279][1] [Display] mdss_dsi_blank+: ctrl=ffffffc0759f6018 ndx=0 power_state=0
2018<3>[ 63.753943 / 01-03 17:36:29.279][1] [Display] mdss_dsi_panel_off: ctrl=ffffffc0759f6018 ndx=0
2019<6>[ 63.840257 / 01-03 17:36:29.369][1] determine_lge_charging_state : states_change[0], next_state[0], pseudo_chg_ui[0]
2020<3>[ 63.840278 / 01-03 17:36:29.369][1] LGE charging scenario : state 0 -> 0(0-0), temp=28, volt=4333, BTM=0, charger=1, cur_set=0/0, chg_cur = 294
2021<6>[ 63.840290 / 01-03 17:36:29.369][1] [LGE-CC] lge_monitor_batt_temp_work : otp_ibat_current=0
2022<6>[ 63.840332 / 01-03 17:36:29.369][1] [LGE-CC] lge_monitor_batt_temp_work : Reported Capacity : 100 / voltage : 4333
2023<6>[ 63.844586 / 01-03 17:36:29.369][1] [Touch] LCD_EVENT_LCD_MODE!
2024<6>[ 63.844594 / 01-03 17:36:29.369][1] [Touch] lcd_mode: 0 (prev: 3)
2025<6>[ 63.844601 / 01-03 17:36:29.369][1] [Touch] U0 mode change
2026<6>[ 63.844611 / 01-03 17:36:29.369][1] [Touch] touch_suspend Start
2027<6>[ 63.844629 / 01-03 17:36:29.369][1] [Touch] sw49407_suspend : touch_suspend start
2028<6>[ 63.844637 / 01-03 17:36:29.369][1] [Touch] Skip lpwg_mode
2029<6>[ 63.845889 / 01-03 17:36:29.369][1] [Touch] touch_suspend End
2030<3>[ 63.845898 / 01-03 17:36:29.369][1] [Display] mdss_dsi_panel_off:-
2031<3>[ 63.846261 / 01-03 17:36:29.369][1] [Display] mdss_dsi_blank-:End
2032<3>[ 63.846277 / 01-03 17:36:29.369][1] [Display] mdss_dsi_off+: ctrl=ffffffc0759f6018 ndx=0 power_state=0
2033<3>[ 63.846965 / 01-03 17:36:29.369][1] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=1 req_power_state=0
2034<3>[ 63.847330 / 01-03 17:36:29.369][1] [Display] mdss_dsi_off-:
2035<3>[ 63.852585 / 01-03 17:36:29.379][1] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2036<6>[ 63.852608 / 01-03 17:36:29.379][1] [Touch] FB_BLANK
2037<3>[ 63.852877 / 01-03 17:36:29.379][1] hdmi_tx_event_handler: event = MDSS_EVENT_SUSPEND suspend=0, hpd_feature=0
2038<6>[ 63.853325 / 01-03 17:36:29.379][0] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xe0/0xe8 mode:0
2039<6>[ 63.853343 / 01-03 17:36:29.379][0] [AOD][START]cur_mode : 0, blank mode : 0, aod_node : 0, keep_aod : 3
2040<6>[ 63.853355 / 01-03 17:36:29.379][0] [AOD][END] cmd_status : 0, next_mode : 3 labibb_ctrl : ctrl
2041<3>[ 63.853722 / 01-03 17:36:29.379][0] hdmi_tx_event_handler: event = MDSS_EVENT_RESUME suspend=0, hpd_feature=0
2042<3>[ 63.858844 / 01-03 17:36:29.379][0] [Display] mdss_dsi_on+: ctrl=ffffffc0759f6018 ndx=0 cur_power_state=0
2043<3>[ 63.858859 / 01-03 17:36:29.379][0] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=0 req_power_state=1
2044<6>[ 63.865844 / 01-03 17:36:29.389][0] [Touch] NOTIFY_TOUCH_RESET! return = 0
2045<6>[ 63.866356 / 01-03 17:36:29.389][0] [Touch] ext_watch_get_current_time : Display[12:01:02], RTC[12:01:02]
2046<6>[ 63.897043 / 01-03 17:36:29.419][0] msm-dwc3 6a00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
2047<3>[ 63.897177 / 01-03 17:36:29.419][0] [Display] mdss_dsi_on-:
2048<3>[ 63.897206 / 01-03 17:36:29.419][0] [Display] mdss_dsi_unblank+: ctrl=ffffffc0759f6018 ndx=0 cur_power_state=1 ctrl_state=4
2049<3>[ 63.899109 / 01-03 17:36:29.419][0] [Display] mdss_dsi_panel_on: ndx=0
2050<6>[ 63.910236 / 01-03 17:36:29.439][1] [Display]lge_change_reader_mode: reader_mode_step4 or off
2051<6>[ 63.910978 / 01-03 17:36:29.439][1] [Display]lge_change_reader_mode: image enhance on
2052<6>[ 63.980816 / 01-03 17:36:29.509][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
2053<6>[ 64.012600 / 01-03 17:36:29.539][1] [Touch] LCD_EVENT_LCD_MODE!
2054<6>[ 64.012610 / 01-03 17:36:29.539][1] [Touch] lcd_mode: 3 (prev: 0)
2055<6>[ 64.012618 / 01-03 17:36:29.539][1] [Touch] touch_resume Start
2056<6>[ 64.012626 / 01-03 17:36:29.539][1] [Touch] touch_resume End
2057<3>[ 64.012667 / 01-03 17:36:29.539][1] [Display] mdss_dsi_panel_on:-
2058<6>[ 64.012690 / 01-03 17:36:29.539][1] [Touch] touch_ic_init Start
2059<6>[ 64.012701 / 01-03 17:36:29.539][1] [Touch] sw49407_init: charger_state = 0x01
2060<6>[ 64.012883 / 01-03 17:36:29.539][1] [Touch] info ptr addr read : 0026425C
2061<6>[ 64.013090 / 01-03 17:36:29.539][1] [Touch] tc status read : 0F7000C0
2062<6>[ 64.013097 / 01-03 17:36:29.539][1] [Touch] ========== Info ADDR ==========
2063<6>[ 64.013104 / 01-03 17:36:29.539][1] [Touch] chip_info_addr : 025C
2064<6>[ 64.013111 / 01-03 17:36:29.539][1] [Touch] reg_info_addr : 0264
2065<6>[ 64.013117 / 01-03 17:36:29.539][1] [Touch] ========== Info ADDR ==========
2066<6>[ 64.013123 / 01-03 17:36:29.539][1] [Touch] Model ID is loaded
2067<6>[ 64.013130 / 01-03 17:36:29.539][1] [Touch] Production Test info checksum is ok
2068<3>[ 64.013157 / 01-03 17:36:29.539][3] [Display] mdss_dsi_unblank-:
2069<6>[ 64.014314 / 01-03 17:36:29.539][1] [Touch] ==Print PT info Data==
2070<6>[ 64.014338 / 01-03 17:36:29.539][1] [Touch] version : v1.07, chip : 9, protocol : 4
2071<6>[ 64.014338 / 01-03 17:36:29.539][1] [Touch]
2072<6>[ 64.014338 / 01-03 17:36:29.539][1] [Touch] fpc : 2, lcm : 4, lot : 9
2073<6>[ 64.014338 / 01-03 17:36:29.539][1] [Touch] product id : L1L57P1
2074<6>[ 64.014338 / 01-03 17:36:29.539][1] [Touch] flash boot : idle, done, crc : ok
2075<6>[ 64.014344 / 01-03 17:36:29.539][1] [Touch] ==Print Config Header Data==
2076<6>[ 64.014355 / 01-03 17:36:29.539][1] [Touch] Chip Rev : 0, Model_ID : 1, lcm_id : 4, fpcb_id : 2, lot_id : 3
2077<6>[ 64.014809 / 01-03 17:36:29.539][0] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
2078<6>[ 64.015039 / 01-03 17:36:29.539][0] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
2079<3>[ 64.015388 / 01-03 17:36:29.539][3] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2080<6>[ 64.015393 / 01-03 17:36:29.539][3] [Touch] FB_UNBLANK
2081<6>[ 64.015665 / 01-03 17:36:29.539][3] lge,blmap: br_lvl(149) -> bl_lvl(793)
2082<6>[ 64.015673 / 01-03 17:36:29.539][3] mdss_fb_set_backlight: [AOD] Save unset_bl_level(793) in U3 mode. Will be updated when kick off function
2083<6>[ 64.015695 / 01-03 17:36:29.539][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2084<6>[ 64.015800 / 01-03 17:36:29.539][1] [Touch] resume ts->lpwg.screen on
2085<6>[ 64.016068 / 01-03 17:36:29.539][1] [Touch] sw49407_lpwg_control mode = 0
2086<6>[ 64.016318 / 01-03 17:36:29.539][1] [Touch] swipe disable
2087<6>[ 64.016370 / 01-03 17:36:29.539][1] [Touch] sw49407_tc_driving = 3, 185
2088<6>[ 64.016570 / 01-03 17:36:29.539][1] [Touch] DDI Display Mode = 3
2089<6>[ 64.016871 / 01-03 17:36:29.539][1] [Touch] Reset Cnt : 52
2090<3>[ 64.019064 / 01-03 17:36:29.539][0] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2091<7>[ 64.019118 / 01-03 17:36:29.539][0] SMBCHG: battchg_suspend: votes unchanged; skipping
2092<3>[ 64.019191 / 01-03 17:36:29.539][0] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2093<3>[ 64.019290 / 01-03 17:36:29.539][0] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2094<7>[ 64.019329 / 01-03 17:36:29.539][0] SMBCHG: usb_icl: 0 voting for 500 - on
2095<7>[ 64.019361 / 01-03 17:36:29.539][0] SMBCHG: usb_icl: vote_min min_vote=500, client_index=0
2096<7>[ 64.019392 / 01-03 17:36:29.539][0] SMBCHG: usb_icl: effective vote is now 500 voted by 0
2097<3>[ 64.019426 / 01-03 17:36:29.539][0] vote: name[SMBCHG: usb_suspend], client_id[2], state[0], val[0]
2098<7>[ 64.019512 / 01-03 17:36:29.539][0] SMBCHG: usb_suspend: 2 voting for 0 - off
2099<6>[ 64.019849 / 01-03 17:36:29.539][0] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2100<6>[ 64.040398 / 01-03 17:36:29.569][2] [Touch] sw49407_te_info : 547, 16.69 ms, 59.89 hz
2101<6>[ 64.040428 / 01-03 17:36:29.569][2] [Touch] touch_ic_init End
2102<6>[ 64.068410 / 01-03 17:36:29.589][2] mdss_fb_update_backlight: [Display] backlight sent to panel :793 in mdss_fb_update_backlight
2103<5>[ 64.069356 / 01-03 17:36:29.589][3] audit: type=1400 audit(1451842589.589:8): avc: denied { write } for pid=412 comm="recovery" name="etc" dev="rootfs" ino=3950 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
2104<5>[ 64.069375 / 01-03 17:36:29.589][3] audit: type=1400 audit(1451842589.589:9): avc: denied { add_name } for pid=412 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
2105<5>[ 64.069397 / 01-03 17:36:29.589][3] audit: type=1400 audit(1451842589.589:10): avc: denied { create } for pid=412 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
2106<5>[ 64.069924 / 01-03 17:36:29.589][3] audit: type=1400 audit(1451842589.589:11): avc: denied { create } for pid=412 comm="recovery" name="external_sd" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
2107<6>[ 64.070310 / 01-03 17:36:29.599][0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
2108<6>[ 64.070596 / 01-03 17:36:29.599][2] qpnp_wled_module_en : wled module enable
2109<6>[ 64.082020 / 01-03 17:36:29.609][3] EXT4-fs (sda20): mounted filesystem with ordered data mode. Opts:
2110<7>[ 64.082045 / 01-03 17:36:29.609][3] SELinux: initialized (dev sda20, type ext4), uses xattr
2111<6>[ 64.091655 / 01-03 17:36:29.619][2] [Touch] TC_Driving OK
2112<6>[ 64.104193 / 01-03 17:36:29.629][3] EXT4-fs (sda20): mounted filesystem with ordered data mode. Opts:
2113<7>[ 64.104218 / 01-03 17:36:29.629][3] SELinux: initialized (dev sda20, type ext4), uses xattr
2114<6>[ 64.124050 / 01-03 17:36:29.649][1] EXT4-fs (sda20): mounted filesystem with ordered data mode. Opts:
2115<7>[ 64.124082 / 01-03 17:36:29.649][1] SELinux: initialized (dev sda20, type ext4), uses xattr
2116<6>[ 64.135961 / 01-03 17:36:29.659][3] FG: update_sram_data: soc:[100], soc_raw[9954], voltage:[4330724], ocv:[4365971], current:[279539], batt_temp:[279], charge_raw [3149289 / 3167000]
2117<6>[ 64.148856 / 01-03 17:36:29.669][1] EXT4-fs (sda20): mounted filesystem with ordered data mode. Opts:
2118<7>[ 64.148887 / 01-03 17:36:29.669][1] SELinux: initialized (dev sda20, type ext4), uses xattr
2119<6>[ 64.169192 / 01-03 17:36:29.689][0] EXT4-fs (sda19): mounted filesystem with ordered data mode. Opts:
2120<7>[ 64.169223 / 01-03 17:36:29.689][0] SELinux: initialized (dev sda19, type ext4), uses xattr
2121<6>[ 64.169750 / 01-03 17:36:29.689][0] SELinux: Context u:object_r:cache_recovery_file:s0 is not valid (left unmapped).
2122<6>[ 64.528000 / 01-03 17:36:30.049][0] EXT4-fs (sda18): mounted filesystem with ordered data mode. Opts:
2123<7>[ 64.528104 / 01-03 17:36:30.049][0] SELinux: initialized (dev sda18, type ext4), uses xattr
2124<6>[ 64.539687 / 01-03 17:36:30.059][2] SELinux: Context u:object_r:vpnclientd_data_file:s0 is not valid (left unmapped).
2125<6>[ 64.572585 / 01-03 17:36:30.099][2] SELinux: Context u:object_r:audioserver_data_file:s0 is not valid (left unmapped).
2126<6>[ 64.573446 / 01-03 17:36:30.099][2] SELinux: Context u:object_r:boottrace_data_file:s0 is not valid (left unmapped).
2127<6>[ 64.573793 / 01-03 17:36:30.099][2] SELinux: Context u:object_r:update_engine_data_file:s0 is not valid (left unmapped).
2128<6>[ 64.574399 / 01-03 17:36:30.099][2] SELinux: Context u:object_r:method_trace_data_file:s0 is not valid (left unmapped).
2129<6>[ 64.575288 / 01-03 17:36:30.099][2] SELinux: Context u:object_r:user_profile_data_file:s0 is not valid (left unmapped).
2130<6>[ 64.897435 / 01-03 17:36:30.419][2] SELinux: Context u:object_r:profman_dump_data_file:s0 is not valid (left unmapped).
2131<6>[ 64.897679 / 01-03 17:36:30.419][2] SELinux: Context u:object_r:qfp-daemon_data_file:s0 is not valid (left unmapped).
2132<6>[ 64.897974 / 01-03 17:36:30.419][2] SELinux: Context u:object_r:data_qsee_file:s0 is not valid (left unmapped).
2133<6>[ 64.898228 / 01-03 17:36:30.419][2] SELinux: Context u:object_r:ipacm_data_file:s0 is not valid (left unmapped).
2134<6>[ 64.898337 / 01-03 17:36:30.419][2] SELinux: Context u:object_r:wide_dhcpv6_data_file:s0 is not valid (left unmapped).
2135<6>[ 64.898391 / 01-03 17:36:30.419][2] SELinux: Context u:object_r:port_bridge_data_file:s0 is not valid (left unmapped).
2136<6>[ 64.898553 / 01-03 17:36:30.419][2] SELinux: Context u:object_r:data_test_data_file:s0 is not valid (left unmapped).
2137<6>[ 64.899007 / 01-03 17:36:30.419][2] SELinux: Context u:object_r:display_misc_file:s0 is not valid (left unmapped).
2138<6>[ 64.899064 / 01-03 17:36:30.419][2] SELinux: Context u:object_r:location_data_file:s0 is not valid (left unmapped).
2139<6>[ 64.899148 / 01-03 17:36:30.419][2] SELinux: Context u:object_r:location_socket:s0 is not valid (left unmapped).
2140<6>[ 64.900275 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:fm_data_file:s0 is not valid (left unmapped).
2141<6>[ 64.900330 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:RIDL_data_file:s0 is not valid (left unmapped).
2142<6>[ 64.900558 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:RIDL_socket:s0 is not valid (left unmapped).
2143<6>[ 64.900620 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:iop_data_file:s0 is not valid (left unmapped).
2144<6>[ 64.900674 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:qti_logkit_priv_data_file:s0 is not valid (left unmapped).
2145<6>[ 64.900764 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:qti_logkit_pub_data_file:s0 is not valid (left unmapped).
2146<6>[ 64.900820 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:qti_logkit_priv_socket:s0 is not valid (left unmapped).
2147<6>[ 64.900877 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:qti_logkit_pub_socket:s0 is not valid (left unmapped).
2148<6>[ 64.900972 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:dts_data_file:s0 is not valid (left unmapped).
2149<6>[ 64.901025 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:seemp_file:s0 is not valid (left unmapped).
2150<6>[ 64.901078 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:tlocd_data_file:s0 is not valid (left unmapped).
2151<6>[ 64.901128 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:qvop_data_file:s0 is not valid (left unmapped).
2152<6>[ 64.901179 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:qvrd_data_file:s0 is not valid (left unmapped).
2153<6>[ 64.901233 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:audio_pp_data_file:s0 is not valid (left unmapped).
2154<6>[ 64.901285 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:vrperfd_data_file:s0 is not valid (left unmapped).
2155<6>[ 64.901378 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:setkey_data_file:s0 is not valid (left unmapped).
2156<6>[ 64.901455 / 01-03 17:36:30.429][2] SELinux: Context u:object_r:bootstat_data_file:s0 is not valid (left unmapped).
2157<6>[ 65.011566 / 01-03 17:36:30.539][2] SELinux: Context u:object_r:qsee_svc_app_data_file:s0 is not valid (left unmapped).
2158<6>[ 65.291958 / 01-03 17:36:30.819][2] SELinux: Context u:object_r:location_app_data_file:s0 is not valid (left unmapped).
2159<6>[ 66.035914 / 01-03 17:36:31.559][2] SELinux: Context u:object_r:ota_data_file:s0 is not valid (left unmapped).
2160<6>[ 66.044614 / 01-03 17:36:31.569][2] SELinux: Context u:object_r:icon_file:s0 is not valid (left unmapped).
2161<6>[ 66.044701 / 01-03 17:36:31.569][2] SELinux: Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
2162<6>[ 66.044802 / 01-03 17:36:31.569][2] SELinux: Context u:object_r:swap_data_file:s0 is not valid (left unmapped).
2163<6>[ 66.044874 / 01-03 17:36:31.569][2] SELinux: Context u:object_r:pkm_data_file:s0 is not valid (left unmapped).
2164<6>[ 66.045101 / 01-03 17:36:31.569][2] SELinux: Context u:object_r:lgmdm_system_data_file:s0 is not valid (left unmapped).
2165<6>[ 66.045324 / 01-03 17:36:31.569][2] SELinux: Context u:object_r:lgis_data_file:s0 is not valid (left unmapped).
2166<6>[ 66.045641 / 01-03 17:36:31.569][2] SELinux: Context u:object_r:hwui_precompiled_data_file:s0 is not valid (left unmapped).
2167<6>[ 66.047548 / 01-03 17:36:31.569][2] SELinux: Context u:object_r:lgmdm_data_file:s0 is not valid (left unmapped).
2168<6>[ 66.052939 / 01-03 17:36:31.579][2] SELinux: Context u:object_r:lgmdm_ir_file:s0 is not valid (left unmapped).
2169<6>[ 66.054330 / 01-03 17:36:31.579][2] SELinux: Context u:object_r:ringtone_file:s0 is not valid (left unmapped).
2170<6>[ 66.136853 / 01-03 17:36:31.659][2] SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
2171<6>[ 66.137525 / 01-03 17:36:31.659][2] SELinux: Context u:object_r:dpmd_data_file:s0 is not valid (left unmapped).
2172<6>[ 66.138376 / 01-03 17:36:31.659][2] SELinux: Context u:object_r:shared_data_file:s0 is not valid (left unmapped).
2173<6>[ 66.138729 / 01-03 17:36:31.659][2] SELinux: Context u:object_r:fota_data_file:s0 is not valid (left unmapped).
2174<6>[ 66.139816 / 01-03 17:36:31.659][2] SELinux: Context u:object_r:time_data_file:s0 is not valid (left unmapped).
2175<6>[ 66.142277 / 01-03 17:36:31.669][2] SELinux: Context u:object_r:usf_data_file:s0 is not valid (left unmapped).
2176<6>[ 66.142822 / 01-03 17:36:31.669][2] SELinux: Context u:object_r:logger_data_file:s0 is not valid (left unmapped).
2177<6>[ 66.143739 / 01-03 17:36:31.669][2] SELinux: Context u:object_r:ccaudit_log_data_file:s0 is not valid (left unmapped).
2178<6>[ 66.144324 / 01-03 17:36:31.669][2] SELinux: Context u:object_r:ramoops_data_file:s0 is not valid (left unmapped).
2179<6>[ 66.145205 / 01-03 17:36:31.669][2] SELinux: Context u:object_r:ipsec_data_file:s0 is not valid (left unmapped).
2180<6>[ 66.145976 / 01-03 17:36:31.669][2] SELinux: Context u:object_r:fpcd_data_file:s0 is not valid (left unmapped).
2181<6>[ 66.147023 / 01-03 17:36:31.669][2] SELinux: Context u:object_r:lgvrhid_data_file:s0 is not valid (left unmapped).
2182<6>[ 66.147623 / 01-03 17:36:31.669][2] SELinux: Context u:object_r:font_data_file:s0 is not valid (left unmapped).
2183<6>[ 66.148728 / 01-03 17:36:31.669][2] SELinux: Context u:object_r:theme_data_file:s0 is not valid (left unmapped).
2184<6>[ 66.150100 / 01-03 17:36:31.679][2] SELinux: Context u:object_r:lgdrm_data_file:s0 is not valid (left unmapped).
2185<6>[ 66.205525 / 01-03 17:36:31.729][1] [EXFAT] (mmcblk0p1[179:1]): trying to mount...
2186<6>[ 66.348517 / 01-03 17:36:31.869][1] [EXFAT] (mmcblk0p1[179:1]): mounted successfully!
2187<7>[ 66.348676 / 01-03 17:36:31.869][1] SELinux: initialized (dev mmcblk0p1, type exfat), uses genfs_contexts
2188<6>[ 66.352652 / 01-03 17:36:31.879][1] [EXFAT] (mmcblk0p1[179:1]): trying to unmount...
2189<6>[ 66.352858 / 01-03 17:36:31.879][1] [EXFAT] (mmcblk0p1[179:1]): unmounted successfully!
2190<6>[ 67.410597 / 01-03 17:36:32.939][3] [EXFAT] (mmcblk0p1[179:1]): trying to mount...
2191<6>[ 67.546927 / 01-03 17:36:33.069][1] [EXFAT] (mmcblk0p1[179:1]): mounted successfully!
2192<7>[ 67.547022 / 01-03 17:36:33.069][1] SELinux: initialized (dev mmcblk0p1, type exfat), uses genfs_contexts
2193<6>[ 67.552616 / 01-03 17:36:33.079][1] lge,blmap: br_lvl(112) -> bl_lvl(428)
2194<11>[ 67.562060 / 01-03 17:36:32.000][0] init: avc: denied { set } for property=sys.usb.config scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service
2195<13>[ 67.562337 / 01-03 17:36:32.000][0] init: Service 'adbd' is being killed...
2196<6>[ 67.563069 / 01-03 17:36:32.000][0] android_usb android0: gadget enable(0)
2197<6>[ 67.563129 / 01-03 17:36:32.000][0] android_disable: android_disable: checked disable_depth(0)
2198<3>[ 67.563187 / 01-03 17:36:32.000][0] dwc3 6a00000.dwc3: request ffffffc0f4dbe300 was not queued to ep0out
2199<6>[ 67.563832 / 01-03 17:36:32.000][0] ffs_function_disable: ffs_function_disable: config->opened(1)
2200<6>[ 67.563889 / 01-03 17:36:32.000][1] functionfs_closed_callback: functionfs_closed_callback: config->enabled(0), dev(ffffffc040e2fc00)
2201<13>[ 67.564573 / 01-03 17:36:32.000][0] init: Service 'adbd' (pid 413) killed by signal 9
2202<13>[ 67.564661 / 01-03 17:36:32.000][0] init: Service 'adbd' (pid 413) killing any children in process group
2203<6>[ 67.566251 / 01-03 17:36:32.000][0] android_usb android0: gadget enable(0)
2204<6>[ 67.566471 / 01-03 17:36:32.000][0] android_usb android0: LGE-USB request function list: adb
2205<6>[ 67.566666 / 01-03 17:36:32.000][0] android_usb android0: gadget enable(1)
2206<6>[ 67.566714 / 01-03 17:36:32.000][0] ffs_function_enable: ffs_function_enable: config->opened(0)
2207<6>[ 67.566749 / 01-03 17:36:32.000][0] android_disable: android_disable: checked disable_depth(1)
2208<6>[ 67.566784 / 01-03 17:36:32.000][0] android_enable: android_enable: checked disable_depth(2)
2209<13>[ 67.566910 / 01-03 17:36:32.000][0] init: Starting service 'adbd'...
2210<6>[ 67.575326 / 01-03 17:36:32.009][3] read descriptors
2211<6>[ 67.575419 / 01-03 17:36:32.009][3] read strings
2212<6>[ 67.575507 / 01-03 17:36:32.009][3] functionfs_ready_callback: functionfs_ready_callback: config->enabled(1), dev(ffffffc040e2fc00)
2213<6>[ 67.575549 / 01-03 17:36:32.009][3] android_enable: android_enable: checked disable_depth(1)
2214<6>[ 67.589168 / 01-03 17:36:32.019][1] EXT4-fs (sda18): mounted filesystem with ordered data mode. Opts:
2215<7>[ 67.589274 / 01-03 17:36:32.019][1] SELinux: initialized (dev sda18, type ext4), uses xattr
2216<6>[ 67.601680 / 01-03 17:36:32.039][3] dwc3_gadget_run_stop Queue DCP check work! 0
2217<3>[ 67.706708 / 01-03 17:36:32.139][0] dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND.
2218<6>[ 67.820316 / 01-03 17:36:32.259][0] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
2219<6>[ 67.854003 / 01-03 17:36:32.289][0] msm-dwc3 6a00000.ssusb: DWC3_CONTROLLER_CONNDONE_EVENT received
2220<6>[ 67.937463 / 01-03 17:36:32.369][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
2221<6>[ 67.971982 / 01-03 17:36:32.409][0] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
2222<6>[ 68.030267 / 01-03 17:36:32.469][0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
2223<3>[ 68.709654 / 01-03 17:36:33.139][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2224<6>[ 68.709798 / 01-03 17:36:33.139][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2225<3>[ 68.712963 / 01-03 17:36:33.149][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2226<7>[ 68.713011 / 01-03 17:36:33.149][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2227<3>[ 68.713085 / 01-03 17:36:33.149][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2228<3>[ 68.713184 / 01-03 17:36:33.149][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2229<7>[ 68.713219 / 01-03 17:36:33.149][2] SMBCHG: usb_icl: votes unchanged; skipping
2230<6>[ 68.713386 / 01-03 17:36:33.149][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2231<6>[ 70.360289 / 01-03 17:36:34.799][1] pet_watchdog [enable : 1, jiffies : 4294944332, delay_time : 1000]
2232<3>[ 78.720427 / 01-03 17:36:43.159][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2233<6>[ 78.720569 / 01-03 17:36:43.159][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2234<3>[ 78.723725 / 01-03 17:36:43.159][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2235<7>[ 78.723772 / 01-03 17:36:43.159][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2236<3>[ 78.723845 / 01-03 17:36:43.159][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2237<3>[ 78.723947 / 01-03 17:36:43.159][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2238<7>[ 78.723984 / 01-03 17:36:43.159][2] SMBCHG: usb_icl: votes unchanged; skipping
2239<6>[ 80.380375 / 01-03 17:36:44.819][1] pet_watchdog [enable : 1, jiffies : 4294945334, delay_time : 1000]
2240<6>[ 82.215807 / 01-03 17:36:46.649][0] lge,blmap: br_lvl(5) -> bl_lvl(29)
2241<3>[ 83.748243 / 01-03 17:36:48.179][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2242<6>[ 83.748354 / 01-03 17:36:48.179][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2243<3>[ 83.751537 / 01-03 17:36:48.189][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2244<7>[ 83.751579 / 01-03 17:36:48.189][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2245<3>[ 83.751643 / 01-03 17:36:48.189][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2246<3>[ 83.751734 / 01-03 17:36:48.189][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2247<7>[ 83.751767 / 01-03 17:36:48.189][2] SMBCHG: usb_icl: votes unchanged; skipping
2248<6>[ 83.762624 / 01-03 17:36:48.199][2] FG: update_sram_data: soc:[100], soc_raw[9958], voltage:[4403813], ocv:[4381688], current:[-273588], batt_temp:[276], charge_raw [3153665 / 3167000]
2249<3>[ 83.798824 / 01-03 17:36:48.229][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2250<6>[ 83.798931 / 01-03 17:36:48.229][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2251<3>[ 83.801865 / 01-03 17:36:48.239][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2252<7>[ 83.801906 / 01-03 17:36:48.239][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2253<3>[ 83.801965 / 01-03 17:36:48.239][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2254<3>[ 83.802053 / 01-03 17:36:48.239][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2255<7>[ 83.802085 / 01-03 17:36:48.239][2] SMBCHG: usb_icl: votes unchanged; skipping
2256<3>[ 83.849433 / 01-03 17:36:48.279][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2257<6>[ 83.849539 / 01-03 17:36:48.279][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2258<3>[ 83.852475 / 01-03 17:36:48.289][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2259<7>[ 83.852514 / 01-03 17:36:48.289][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2260<3>[ 83.852573 / 01-03 17:36:48.289][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2261<3>[ 83.852660 / 01-03 17:36:48.289][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2262<7>[ 83.852693 / 01-03 17:36:48.289][2] SMBCHG: usb_icl: votes unchanged; skipping
2263<6>[ 84.219617 / 01-03 17:36:48.649][0] lge,blmap: br_lvl(0) -> bl_lvl(0)
2264<6>[ 84.219935 / 01-03 17:36:48.649][0] mdss_fb_blank_sub: [Display] mdss_fb_blank+0xe0/0xe8 mode:4
2265<6>[ 84.219953 / 01-03 17:36:48.649][0] [AOD][START]cur_mode : 3, blank mode : 4, aod_node : 0, keep_aod : 3
2266<6>[ 84.219965 / 01-03 17:36:48.649][0] [AOD][END] cmd_status : 4, next_mode : 0 labibb_ctrl : ctrl
2267<6>[ 84.222069 / 01-03 17:36:48.659][0] qpnp_wled_module_en : wled module disable
2268<3>[ 84.251646 / 01-03 17:36:48.689][1] [Display] mdss_dsi_blank+: ctrl=ffffffc0759f6018 ndx=0 power_state=0
2269<3>[ 84.253940 / 01-03 17:36:48.689][1] [Display] mdss_dsi_panel_off: ctrl=ffffffc0759f6018 ndx=0
2270<3>[ 84.261882 / 01-03 17:36:48.699][2] SMBCHG: usbin_uv_handler: could not disable charger: -22
2271<6>[ 84.261884 / 01-03 17:36:48.699][2] dwc3_msm_power_get_property_usb: POWER_SUPPLY_PROP_VOLTAGE_NOW
2272<3>[ 84.264799 / 01-03 17:36:48.699][2] vote: name[SMBCHG: battchg_suspend], client_id[1], state[0], val[0]
2273<7>[ 84.264807 / 01-03 17:36:48.699][2] SMBCHG: battchg_suspend: votes unchanged; skipping
2274<3>[ 84.264846 / 01-03 17:36:48.699][2] SMBCHG: smbchg_config_chg_battery_type: BATTERY FULL NAME : LGE_BL44E1F_LGC_3200mAh
2275<3>[ 84.264910 / 01-03 17:36:48.699][2] vote: name[SMBCHG: usb_icl], client_id[0], state[1], val[500]
2276<7>[ 84.264916 / 01-03 17:36:48.699][2] SMBCHG: usb_icl: votes unchanged; skipping
2277<6>[ 84.344644 / 01-03 17:36:48.779][1] [Touch] LCD_EVENT_LCD_MODE!
2278<6>[ 84.344655 / 01-03 17:36:48.779][1] [Touch] lcd_mode: 0 (prev: 3)
2279<6>[ 84.344662 / 01-03 17:36:48.779][1] [Touch] U0 mode change
2280<6>[ 84.344672 / 01-03 17:36:48.779][1] [Touch] touch_suspend Start
2281<6>[ 84.344690 / 01-03 17:36:48.779][1] [Touch] sw49407_suspend : touch_suspend start
2282<6>[ 84.344699 / 01-03 17:36:48.779][1] [Touch] Skip lpwg_mode
2283<6>[ 84.346194 / 01-03 17:36:48.779][1] [Touch] touch_suspend End
2284<3>[ 84.346206 / 01-03 17:36:48.779][1] [Display] mdss_dsi_panel_off:-
2285<3>[ 84.346573 / 01-03 17:36:48.779][1] [Display] mdss_dsi_blank-:End
2286<3>[ 84.346589 / 01-03 17:36:48.779][1] [Display] mdss_dsi_off+: ctrl=ffffffc0759f6018 ndx=0 power_state=0
2287<3>[ 84.347277 / 01-03 17:36:48.779][1] [Display] mdss_dsi_panel_power_ctrl: cur_power_state=1 req_power_state=0
2288<3>[ 84.347499 / 01-03 17:36:48.779][1] [Display] mdss_dsi_off-:
2289<3>[ 84.351428 / 01-03 17:36:48.789][0] mdss_fb_blank_sub: mdss_fb_blank_sub: -
2290<6>[ 84.351606 / 01-03 17:36:48.789][0] [Touch] FB_BLANK
2291<3>[ 84.352819 / 01-03 17:36:48.789][1] hdmi_tx_event_handler: event = MDSS_EVENT_SUSPEND suspend=0, hpd_feature=0