· 6 years ago · Nov 05, 2019, 06:24 AM
1DDR Version 1.20 20190314
2In
3channel 0
4CS = 0
5MR0=0x98
6MR4=0x1
7MR5=0xFF
8MR8=0x8
9MR12=0x72
10MR14=0x72
11MR18=0x0
12MR19=0x0
13MR24=0x8
14MR25=0x0
15CS = 1
16MR0=0x18
17MR4=0x1
18MR5=0xFF
19MR8=0x8
20MR12=0x72
21MR14=0x72
22MR18=0x0
23MR19=0x0
24MR24=0x8
25MR25=0x0
26channel 1
27CS = 0
28MR0=0x98
29MR4=0x1
30MR5=0xFF
31MR8=0x8
32MR12=0x72
33MR14=0x72
34MR18=0x0
35MR19=0x0
36MR24=0x8
37MR25=0x0
38CS = 1
39MR0=0x18
40MR4=0x1
41MR5=0xFF
42MR8=0x8
43MR12=0x72
44MR14=0x72
45MR18=0x0
46MR19=0x0
47MR24=0x8
48MR25=0x0
49channel 0 training pass!
50channel 1 training pass!
51change freq to 400MHz 0,1
52channel 0
53CS = 0
54MR0=0x98
55MR4=0x1
56MR5=0xFF
57MR8=0x8
58MR12=0x72
59MR14=0x72
60MR18=0x0
61MR19=0x0
62MR24=0x8
63MR25=0x0
64CS = 1
65MR0=0x18
66MR4=0x1
67MR5=0xFF
68MR8=0x8
69MR12=0x72
70MR14=0x72
71MR18=0x0
72MR19=0x0
73MR24=0x8
74MR25=0x0
75channel 1
76CS = 0
77MR0=0x98
78MR4=0x1
79MR5=0xFF
80MR8=0x8
81MR12=0x72
82MR14=0x72
83MR18=0x0
84MR19=0x0
85MR24=0x8
86MR25=0x0
87CS = 1
88MR0=0x18
89MR4=0x1
90MR5=0xFF
91MR8=0x8
92MR12=0x72
93MR14=0x72
94MR18=0x0
95MR19=0x0
96MR24=0x8
97MR25=0x0
98channel 0 training pass!
99channel 1 training pass!
100change freq to 800MHz 1,0
101Channel 0: LPDDR4,800MHz
102Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
103Channel 1: LPDDR4,800MHz
104Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
105256B stride
106ch 0 ddrconfig = 0x101, ddrsize = 0x2020
107ch 1 ddrconfig = 0x101, ddrsize = 0x2020
108pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
109OUT
110Boot1: 2019-03-14, version: 1.19
111CPUId = 0x0
112ChipType = 0x10, 250
113SdmmcInit=2 0
114BootCapSize=100000
115UserCapSize=119276MB
116FwPartOffset=2000 , 100000
117mmc0:cmd5,20
118SdmmcInit=0 0
119BootCapSize=0
120UserCapSize=15193MB
121FwPartOffset=2000 , 0
122StorageInit ok = 201266
123SecureMode = 0
124SecureInit read PBA: 0x4
125SecureInit read PBA: 0x404
126SecureInit read PBA: 0x804
127SecureInit read PBA: 0xc04
128SecureInit read PBA: 0x1004
129SecureInit read PBA: 0x1404
130SecureInit read PBA: 0x1804
131SecureInit read PBA: 0x1c04
132SecureInit ret = 0, SecureMode = 0
133atags_set_bootdev: ret:(0)
134GPT 0x3380ec0 signature is wrong
135recovery gpt...
136GPT 0x3380ec0 signature is wrong
137recovery gpt fail!
138LoadTrust Addr:0x4000
139No find bl30.bin
140No find bl32.bin
141Load uboot, ReadLba = 2000
142Load OK, addr=0x200000, size=0xdd07c
143RunBL31 0x10000
144NOTICE: BL31: v1.3(debug):22b599a
145NOTICE: BL31: Built : 11:03:32, Jul 10 2019
146NOTICE: BL31: Rockchip release version: v1.1
147INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
148INFO: Using opteed sec cpu_context!
149INFO: boot cpu mask: 0
150INFO: plat_rockchip_pmu_init(1181): pd status 3e
151INFO: BL31: Initializing runtime services
152WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined foK
153ERROR: Error initializing runtime service opteed_fast
154INFO: BL31: Preparing for EL3 exit to normal world
155INFO: Entry point address = 0x200000
156INFO: SPSR = 0x3c9
157fdtdec_get_addr_size_fixed: reg: addr=ff770000, size=10000
158fdtdec_get_addr_size_fixed: reg: addr=ff320000, size=1000
159
160
161U-Boot 2017.09-03638-g55e8e8b-dirty (Oct 04 2019 - 15:12:04 -0400)
162
163Model: Pine64 RK3399 Pinebook Pro
164PreSerial: 2
165DRAM: 3.9 GiB
166Sysmem: init
167Relocation Offset is: f5bf0000
168I2c0 speed: 400000Hz
169PMIC: RK808
170vdd_center 900000 uV
171vdd_log init 900000 uV
172rk_board_init PWM2 pinctrl init fail!
173rk_board_init: vcc3v0_sdio cannot set regulator value -38
174vdd_center 900000 uV
175 DCDC_REG1@ vdd_center: 750000uV <-> 1400000uV, set 900000uV, enabling | suspend -61d
176 DCDC_REG4@ vcc_1v8: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspend 1800000g
177 LDO_REG1@ vcc1v8_dvp: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspend 1800000g
178 LDO_REG4@ vcc_sd: 3300000uV <-> 3300000uV, set 3300000uV, enabling | suspend 3300000g
179 LDO_REG7@ vcca1v8_codec: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspend 1800000g
180 LDO_REG8@ vcc_3v0: 3000000uV <-> 3000000uV, set 3000000uV, enabling | suspend 3000000g
181 SWITCH_REG2@ vcc3v3_s0: -61uV <-> -61uV, set 0uV, enabling | suspend -61d
182 dc-12v@ dc_12v: 12000000uV <-> 12000000uV, set 12000000uV, enabling | suspend )
183 vcc-sys@ vcc_sys: 5000000uV <-> 5000000uV, set 5000000uV, enabling | suspend -61)
184 vcc3v3-sys@ vcc3v3_sys: 3300000uV <-> 3300000uV, set 3300000uV, enabling | suspend -61)
185 vcc-phy-regulator@ vcc_phy: -61uV <-> -61uV, set -61uV, enabling | suspend -61g
186 led-regulator@ led_regulator: -61uV <-> -61uV, set -61uV, enabling | suspend -61g
187 vcc5v0-host-en@ vcc5v0_host: 5000000uV <-> 5000000uV, set 5000000uV, enabling | suspend -61)
188vcc5v0-usb3-host-regulator@vcc5v0_usb3_host: -61uV <-> -61uV, set -61uV, enabling | suspend -g
189 vcc5v0-typec0-en@ vcc5v0_typec0: -61uV <-> -61uV, set -61uV, enabling | suspend -61g
190 vcc1v8-sdio@ vcc1v8_sdio: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspend -61)
191 vcc3v0-sdio@ vcc3v0_sdio: 3000000uV <-> 3000000uV, set 3000000uV, enabling | suspend -61)
192vdd_log init 900000 uV
193 vdd_log@ vdd_log: 800000uV <-> 1400000uV, set 900000uV, enabling | suspend -61V
194MMC: dwmmc@fe310000: 2, sdhci@fe330000: 0, dwmmc@fe320000: 1
195Invalid bus 0 (err=-19)
196*** Warning - spi_flash_probe_bus_cs() failed, using default environment
197
198In: serial
199Out: serial
200Err: serial
201Model: Pine64 RK3399 Pinebook Pro
202RKPARM: Invalid parameter part table
203switch to partitions #0, OK
204mmc1 is current device
205Found IDB in SDcard
206Bootdev(atags): mmc 1
207PartType: DOS
208rockchip_get_boot_mode: Could not found misc partition
209boot mode: None
210init_resource_list: failed to get resource part, ret=-1
211Can't find file:logo.bmp
212failed to display uboot logo
213CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
214CLK: (uboot. armb: enter 24000 KHz, init 24000 KHz, kernel 0N/A)
215 aplll 816000 KHz
216 apllb 24000 KHz
217 dpll 800000 KHz
218 cpll 24000 KHz
219 gpll 800000 KHz
220 npll 600000 KHz
221 vpll 24000 KHz
222 aclk_perihp 133333 KHz
223 hclk_perihp 66666 KHz
224 pclk_perihp 33333 KHz
225 aclk_perilp0 266666 KHz
226 hclk_perilp0 88888 KHz
227 pclk_perilp0 44444 KHz
228 hclk_perilp1 100000 KHz
229 pclk_perilp1 50000 KHz
230Net: No ethernet found.
231Hit key to stop autoboot('CTRL+C'): 0
232do_boot_rockchip: Could not find boot part
233Checking for mmc dev 1...
234RKPARM: Invalid parameter part table
235switch to partitions #0, OK
236mmc1 is current device
237Scanning mmc 1 for bootable partitions...
238Scanning mmc 1:1 for extlinux or boot scripts...
239Found U-Boot script /boot/boot.scr
2401056 bytes read in 10 ms (102.5 KiB/s)
241## Executing script at 00500000
24230841344 bytes read in 1326 ms (22.2 MiB/s)
24378334 bytes read in 67 ms (1.1 MiB/s)
2447363173 bytes read in 333 ms (21.1 MiB/s)
245## Flattened Device Tree blob at 08300000
246 Booting using the fdt blob at 0x8300000
247 reserving fdt memory region: addr=8300000 size=14000
248fdtdec_get_addr_size_fixed: reg: addr=00000000, size=0
249 Loading Device Tree to 00000000f3dc1000, end 00000000f3dd7fff ... OK
250Adding bank: 0x00200000 - 0xf8000000 (size: 0xf7e00000)
251Total: 2837.485 ms
252
253Starting kernel ...
254
255[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
256[ 0.000000] Linux version 5.4.0-rc1-0.3 (root@aarch64) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Mon Nov 4 9
257[ 0.000000] Machine model: Pine64 Pinebook Pro
258[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
259[ 0.000000] printk: bootconsole [uart8250] enabled
260[ 0.000000] efi: Getting EFI parameters from FDT:
261[ 0.000000] efi: UEFI not found.
262[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x000000B
263[ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
264[ 0.000000] NUMA: No NUMA configuration found
265[ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
266[ 0.000000] NUMA: NODE_DATA [mem 0xf67e2800-0xf67e3fff]
267[ 0.000000] Zone ranges:
268[ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff]
269[ 0.000000] Normal empty
270[ 0.000000] Movable zone start for each node
271[ 0.000000] Early memory node ranges
272[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
273[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
274[ 0.000000] psci: probing for conduit method from DT.
275[ 0.000000] psci: PSCIv1.0 detected in firmware.
276[ 0.000000] psci: Using standard PSCI v0.2 function IDs
277[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
278[ 0.000000] psci: SMC Calling Convention v1.0
279[ 0.000000] percpu: Embedded 22 pages/cpu s53144 r8192 d28776 u90112
280[ 0.000000] Detected VIPT I-cache on CPU0
281[ 0.000000] CPU features: detected: ARM erratum 845719
282[ 0.000000] CPU features: detected: GIC system register CPU interface
283[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
284[ 0.000000] Policy zone: DMA32
285[ 0.000000] Kernel command line: console=ttyS2,1500000 root=PARTUUID=efb5a310-01 rw rootwait bootsplash.bo0
286[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
287[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
288[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
289[ 0.000000] Memory: 3933448K/4061184K available (18300K kernel code, 2022K rwdata, 8292K rodata, 1408K ini)
290[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
291[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
292[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
293[ 0.000000] Tasks RCU enabled.
294[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
295[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
296[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
297[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
298[ 0.000000] GICv3: 988 SPIs implemented
299[ 0.000000] GICv3: 0 Extended SPIs implemented
300[ 0.000000] GICv3: Distributor has no Range Selector support
301[ 0.000000] GICv3: 16 PPIs implemented
302[ 0.000000] GICv3: no VLPI support, no direct LPI support
303[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
304[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
305[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f5880000 (flat, esz 8, psz 64K, shr 0)
306[ 0.000000] ITS: using cache flushing for cmd queue
307[ 0.000000] GICv3: using LPI property table @0x00000000f5840000
308[ 0.000000] GIC: using cache flushing for LPI property table
309[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f5850000
310[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2}
311[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
312[ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x44c with crng_init=0
313[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
314[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 44s
315[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
316[ 0.003001] Console: colour dummy device 80x25
317[ 0.003519] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj)
318[ 0.004495] pid_max: default: 32768 minimum: 301
319[ 0.005025] LSM: Security Framework initializing
320[ 0.005538] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
321[ 0.006257] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
322[ 0.031111] ASID allocator initialised with 32768 entries
323[ 0.039105] rcu: Hierarchical SRCU implementation.
324[ 0.047215] Platform MSI: interrupt-controller@fee20000 domain created
325[ 0.048232] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
326[ 0.052900] EFI services will not be available.
327[ 0.059202] smp: Bringing up secondary CPUs ...
328[ 0.091382] Detected VIPT I-cache on CPU1
329[ 0.091416] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
330[ 0.091429] GICv3: CPU1: using allocated LPI pending table @0x00000000f5860000
331[ 0.091473] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
332[ 0.123423] Detected VIPT I-cache on CPU2
333[ 0.123445] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
334[ 0.123456] GICv3: CPU2: using allocated LPI pending table @0x00000000f5870000
335[ 0.123482] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
336[ 0.155495] Detected VIPT I-cache on CPU3
337[ 0.155516] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
338[ 0.155526] GICv3: CPU3: using allocated LPI pending table @0x00000000f5900000
339[ 0.155551] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
340[ 0.190270] CPU features: detected: EL2 vector hardening
341[ 0.190572] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
342[ 0.190937] Detected PIPT I-cache on CPU4
343[ 0.192118] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
344[ 0.192565] GICv3: CPU4: using allocated LPI pending table @0x00000000f5910000
345[ 0.193779] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
346[ 0.229831] Detected PIPT I-cache on CPU5
347[ 0.230961] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
348[ 0.231396] GICv3: CPU5: using allocated LPI pending table @0x00000000f5920000
349[ 0.232473] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
350[ 0.237367] smp: Brought up 1 node, 6 CPUs
351[ 0.250691] SMP: Total of 6 processors activated.
352[ 0.251157] CPU features: detected: 32-bit EL0 Support
353[ 0.251662] CPU features: detected: CRC32 instructions
354[ 0.479621] CPU: All CPU(s) started at EL2
355[ 0.480859] alternatives: patching kernel code
356[ 0.493120] devtmpfs: initialized
357[ 0.513727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
358[ 0.514804] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
359[ 0.517542] xor: measuring software checksum speed
360[ 0.556709] 8regs : 1615.000 MB/sec
361[ 0.596517] 32regs : 54.000 MB/sec
362[ 0.636492] arm64_neon: 47.000 MB/sec
363[ 0.637830] xor: using function: 8regs (1615.000 MB/sec)
364[ 0.639986] pinctrl core: initialized pinctrl subsystem
365[ 0.706873] DMI not present or invalid.
366[ 0.728009] NET: Registered protocol family 16
367[ 0.832409] DMA: preallocated 256 KiB pool for atomic allocations
368[ 0.834447] audit: initializing netlink subsys (disabled)
369[ 0.841503] audit: type=2000 audit(0.832:1): state=initialized audit_enabled=0 res=1
370[ 0.907440] cpuidle: using governor menu
371[ 0.927363] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
372[ 1.009910] Serial: AMBA PL011 UART driver
373[ 3.671160] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
374[ 3.673269] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
375[ 3.675498] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
376[ 3.677391] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
377[ 3.970702] cryptd: max_cpu_qlen set to 1000
378[ 4.581404] raid6: neonx8 gen() 24 MB/s
379[ 4.650049] raid6: neonx8 xor() 21 MB/s
380[ 4.720645] raid6: neonx4 gen() 19 MB/s
381[ 4.791702] raid6: neonx4 xor() 18 MB/s
382[ 4.861382] raid6: neonx2 gen() 17 MB/s
383[ 4.931877] raid6: neonx2 xor() 20 MB/s
384[ 5.002464] raid6: neonx1 gen() 13 MB/s
385[ 5.073121] raid6: neonx1 xor() 15 MB/s
386[ 5.143780] raid6: int64x8 gen() 13 MB/s
387[ 5.214683] raid6: int64x8 xor() 9 MB/s
388[ 5.285251] raid6: int64x4 gen() 12 MB/s
389[ 5.355354] raid6: int64x4 xor() 10 MB/s
390[ 5.421860] raid6: int64x2 gen() 8 MB/s
391[ 5.493360] raid6: int64x2 xor() 9 MB/s
392[ 5.567975] raid6: int64x1 gen() 6 MB/s
393[ 5.636054] raid6: int64x1 xor() 6 MB/s
394[ 5.637344] raid6: using algorithm neonx8 gen() 24 MB/s
395[ 5.639096] raid6: .... xor() 21 MB/s, rmw enabled
396[ 5.640469] raid6: using neon recovery algorithm
397[ 5.670836] ACPI: Interpreter disabled.
398[ 5.710203] iommu: Default domain type: Translated
399[ 5.734514] rk_iommu ff650800.iommu: IRQ index 1 not found
400[ 5.752367] rk_iommu ff8f3f00.iommu: IRQ index 1 not found
401[ 5.768625] rk_iommu ff903f00.iommu: IRQ index 1 not found
402[ 5.784481] rk_iommu ff914000.iommu: IRQ index 1 not found
403[ 5.800490] rk_iommu ff924000.iommu: IRQ index 1 not found
404[ 5.814064] vgaarb: loaded
405[ 5.830033] SCSI subsystem initialized
406[ 5.849183] usbcore: registered new interface driver usbfs
407[ 5.853023] usbcore: registered new interface driver hub
408[ 5.858491] usbcore: registered new device driver usb
409[ 5.921959] mc: Linux media interface: v0.10
410[ 5.924700] videodev: Linux video capture interface: v2.00
411[ 5.930085] pps_core: LinuxPPS API ver. 1 registered
412[ 5.931600] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
413[ 5.934915] PTP clock support registered
414[ 5.986859] Advanced Linux Sound Architecture Driver Initialized.
415[ 6.009064] Bluetooth: Core ver 2.22
416[ 6.012298] NET: Registered protocol family 31
417[ 6.013646] Bluetooth: HCI device and connection manager initialized
418[ 6.015913] Bluetooth: HCI socket layer initialized
419[ 6.017441] Bluetooth: L2CAP socket layer initialized
420[ 6.020719] Bluetooth: SCO socket layer initialized
421[ 6.023080] NetLabel: Initializing
422[ 6.024517] NetLabel: domain hash size = 128
423[ 6.025767] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
424[ 6.030332] NetLabel: unlabeled traffic allowed by default
425[ 6.058164] clocksource: Switched to clocksource arch_sys_counter
426[ 6.070592] VFS: Disk quotas dquot_6.6.0
427[ 6.075072] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
428[ 6.094626] pnp: PnP ACPI: disabled
429[ 6.475037] thermal_sys: Registered thermal governor 'step_wise'
430[ 6.475231] thermal_sys: Registered thermal governor 'power_allocator'
431[ 6.504039] NET: Registered protocol family 2
432[ 6.535215] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
433[ 6.542646] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
434[ 6.564222] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
435[ 6.603725] TCP: Hash tables configured (established 32768 bind 32768)
436[ 6.611604] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
437[ 6.620868] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
438[ 6.636732] NET: Registered protocol family 1
439[ 6.653349] RPC: Registered named UNIX socket transport module.
440[ 6.655760] RPC: Registered udp transport module.
441[ 6.657146] RPC: Registered tcp transport module.
442[ 6.658927] RPC: Registered tcp NFSv4.1 backchannel transport module.
443[ 6.679214] PCI: CLS 0 bytes, default 64
444[ 6.729221] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
445[ 6.746498] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
446[ 6.768485] kvm [1]: IPA Size Limit: 40bits
447[ 6.821027] kvm [1]: vgic-v2@fff20000
448[ 6.823881] kvm [1]: GIC system register CPU interface enabled
449[ 6.833068] kvm [1]: vgic interrupt IRQ10
450[ 6.843782] kvm [1]: Hyp mode initialized successfully
451[ 7.197337] workingset: timestamp_bits=44 max_order=20 bucket_order=0
452[ 7.608885] squashfs: version 4.0 (2009/01/31) Phillip Lougher
453[ 7.647880] NFS: Registering the id_resolver key type
454[ 7.650743] Key type id_resolver registered
455[ 7.652013] Key type id_legacy registered
456[ 7.654168] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
457[ 7.655952] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
458[ 7.713013] fuse: init (API version 7.31)
459[ 7.741164] 9p: Installing v9fs 9p2000 file system support
460[ 9.061566] NET: Registered protocol family 38
461[ 9.063871] Key type asymmetric registered
462[ 9.065109] Asymmetric key parser 'x509' registered
463[ 9.068279] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
464[ 9.074930] io scheduler mq-deadline registered
465[ 9.076434] io scheduler kyber registered
466[ 10.792806] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
467[ 10.795789] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
468[ 10.870884] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
469[ 10.873183] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
470[ 11.415059] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
471[ 11.513241] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
472[ 11.550692] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
473[ 11.560271] printk: console [ttyS2] enabled
474[ 11.560271] printk: console [ttyS2] enabled
475[ 11.562810] printk: bootconsole [uart8250] disabled
476[ 11.562810] printk: bootconsole [uart8250] disabled
477[ 11.651408] SuperH (H)SCI(F) driver initialized
478[ 11.698262] msm_serial: driver initialized
479[ 12.468173] cacheinfo: Unable to detect cache hierarchy for CPU 0
480[ 12.921312] brd: module loaded
481[ 13.382212] loop: module loaded
482[ 14.925794] spi-nor spi0.0: SPI transfer timed out
483[ 14.926386] spi_master spi0: failed to transfer one message from queue
484[ 14.931797] spi-nor spi0.0: gd25q128 (16384 Kbytes)
485[ 14.941557] 3 fixed-partitions partitions found on MTD device spi0.0
486[ 14.943690] Creating 3 MTD partitions on "spi0.0":
487[ 14.944976] 0x000000000000-0x0000003f8000 : "loader"
488[ 15.028875] 0x0000003f8000-0x000000400000 : "env"
489[ 15.104600] 0x0000007c0000-0x000000800000 : "vendor"
490[ 15.310736] libphy: Fixed MDIO Bus: probed
491[ 15.356037] tun: Universal TUN/TAP device driver, 1.6
492[ 15.464677] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
493[ 15.466395] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
494[ 15.469444] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
495[ 15.471323] igb: Copyright (c) 2007-2014 Intel Corporation.
496[ 15.475003] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
497[ 15.476441] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
498[ 15.514350] sky2: driver version 1.30
499[ 15.703594] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
500[ 15.708300] usbcore: registered new interface driver pegasus
501[ 15.711666] usbcore: registered new interface driver rtl8150
502[ 15.715351] usbcore: registered new interface driver r8152
503[ 15.719018] usbcore: registered new interface driver asix
504[ 15.722166] usbcore: registered new interface driver ax88179_178a
505[ 15.725171] usbcore: registered new interface driver cdc_ether
506[ 15.728445] usbcore: registered new interface driver dm9601
507[ 15.732187] usbcore: registered new interface driver CoreChips
508[ 15.735807] usbcore: registered new interface driver smsc75xx
509[ 15.739387] usbcore: registered new interface driver smsc95xx
510[ 15.742925] usbcore: registered new interface driver net1080
511[ 15.746131] usbcore: registered new interface driver plusb
512[ 15.748819] usbcore: registered new interface driver cdc_subset
513[ 15.752125] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
514[ 15.756133] usbcore: registered new interface driver cdc_ncm
515[ 15.766982] VFIO - User Level meta-driver version: 0.3
516[ 15.964736] dwc3 fe900000.dwc3: IRQ host not found
517[ 15.966703] dwc3 fe900000.dwc3: IRQ dwc_usb3 not found
518[ 16.071087] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
519[ 16.072430] ehci-pci: EHCI PCI platform driver
520[ 16.075567] ehci-platform: EHCI generic platform driver
521[ 16.090277] ehci-platform fe380000.usb: EHCI Host Controller
522[ 16.092304] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
523[ 16.099230] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
524[ 16.115284] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
525[ 16.148965] hub 1-0:1.0: USB hub found
526[ 16.151976] hub 1-0:1.0: 1 port detected
527[ 16.182695] ehci-platform fe3c0000.usb: EHCI Host Controller
528[ 16.184724] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
529[ 16.191736] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
530[ 16.207409] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
531[ 16.240490] hub 2-0:1.0: USB hub found
532[ 16.243436] hub 2-0:1.0: 1 port detected
533[ 16.274872] ehci-orion: EHCI orion driver
534[ 16.288426] ehci-exynos: EHCI EXYNOS driver
535[ 16.299914] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
536[ 16.302322] ohci-pci: OHCI PCI platform driver
537[ 16.306431] ohci-platform: OHCI generic platform driver
538[ 16.317063] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
539[ 16.319766] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
540[ 16.326511] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
541[ 16.420203] hub 3-0:1.0: USB hub found
542[ 16.423081] hub 3-0:1.0: 1 port detected
543[ 16.448326] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
544[ 16.450999] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
545[ 16.457043] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
546[ 16.555846] hub 4-0:1.0: USB hub found
547[ 16.559161] hub 4-0:1.0: 1 port detected
548[ 16.587980] ohci-exynos: OHCI EXYNOS driver
549[ 16.632548] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
550[ 16.635401] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
551[ 16.643489] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
552[ 16.647429] xhci-hcd xhci-hcd.0.auto: irq 228, io mem 0xfe900000
553[ 16.693271] hub 5-0:1.0: USB hub found
554[ 16.696295] hub 5-0:1.0: 1 port detected
555[ 16.716239] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
556[ 16.718602] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
557[ 16.720526] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
558[ 16.724819] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
559[ 16.756544] hub 6-0:1.0: USB hub found
560[ 16.759501] hub 6-0:1.0: 1 port detected
561[ 16.803610] usbcore: registered new interface driver usb-storage
562[ 16.831608] usb 3-1: new low-speed USB device number 2 using ohci-platform
563[ 17.142440] i2c /dev entries driver
564[ 17.336097] rk808 0-001b: chip id: 0x0
565[ 17.503360] rk808-rtc rk808-rtc: registered as rtc0
566[ 17.759954] rockchip-rga ff680000.rga: HW Version: 0x03.02
567[ 17.772808] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
568[ 18.099129] Bluetooth: HCI UART driver ver 2.3
569[ 18.189513] sdhci: Secure Digital Host Controller Interface driver
570[ 18.191325] sdhci: Copyright(c) Pierre Ossman
571[ 18.215460] Synopsys Designware Multimedia Card Interface Driver
572[ 18.278384] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
573[ 18.280625] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
574[ 18.283056] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
575[ 18.286791] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
576[ 18.292780] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
577[ 18.294672] mmc_host mmc0: card is non-removable.
578[ 18.325218] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
579[ 18.382300] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
580[ 18.384494] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
581[ 18.386488] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
582[ 18.389226] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
583[ 18.395060] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
584[ 18.404234] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
585[ 18.410261] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
586[ 18.416103] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
587[ 18.424304] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
588[ 18.425671] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
589[ 18.437141] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
590[ 18.453474] random: fast init done
591[ 18.526857] sdhci-pltfm: SDHCI platform and OF driver helper
592[ 18.556858] mmc2: CQHCI version 5.10
593[ 18.604149] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
594[ 18.611341] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div )
595[ 18.628089] ledtrig-cpu: registered to indicate activity on CPUs
596[ 18.641132] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:250
597[ 18.703343] hid-generic 0003:258A:001E.0001: input: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] 0
598[ 18.727193] input: HAILUCK CO.,LTD USB KEYBOARD Mouse as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/01
599[ 18.728901] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.2
600[ 18.730385] input: HAILUCK CO.,LTD USB KEYBOARD System Control as /devices/platform/fe3a0000.usb/usb3/3-1/3
601[ 18.789942] input: HAILUCK CO.,LTD USB KEYBOARD Consumer Control as /devices/platform/fe3a0000.usb/usb3/3-4
602[ 18.791326] input: HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control as /devices/platform/fe3a0000.usb/u5
603[ 18.792692] hid-generic 0003:258A:001E.0002: input: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on 1
604[ 18.794053] usbcore: registered new interface driver usbhid
605[ 18.794544] usbhid: USB HID core driver
606[ 18.830506] xt_time: kernel timezone is -0000
607[ 18.831082] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
608[ 18.831737] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
609[ 18.833107] IPVS: ipvs loaded.
610[ 18.833386] IPVS: [rr] scheduler registered.
611[ 18.833821] IPVS: [wrr] scheduler registered.
612[ 18.834212] IPVS: [lc] scheduler registered.
613[ 18.834589] IPVS: [wlc] scheduler registered.
614[ 18.834972] IPVS: [fo] scheduler registered.
615[ 18.835349] IPVS: [ovf] scheduler registered.
616[ 18.835740] IPVS: [lblc] scheduler registered.
617[ 18.836144] IPVS: [lblcr] scheduler registered.
618[ 18.836543] IPVS: [dh] scheduler registered.
619[ 18.836920] IPVS: [sh] scheduler registered.
620[ 18.837297] IPVS: [sed] scheduler registered.
621[ 18.837714] IPVS: [nq] scheduler registered.
622[ 18.838873] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
623[ 18.839511] Initializing XFRM netlink socket
624[ 18.840546] NET: Registered protocol family 10
625[ 18.872160] Segment Routing with IPv6
626[ 18.897428] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
627[ 18.928493] NET: Registered protocol family 17
628[ 18.931907] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts .
629[ 18.938953] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
630[ 18.940427] Bluetooth: HIDP socket layer initialized
631[ 18.944006] 8021q: 802.1Q VLAN Support v1.8
632[ 18.952897] 9pnet: Installing 9P2000 support
633[ 18.957202] Key type dns_resolver registered
634[ 18.986258] registered taskstats version 1
635[ 19.040867] dwmmc_rockchip fe320000.dwmmc: Busy; trying anyway
636[ 19.051889] Btrfs loaded, crc32c=crc32c-generic
637[ 19.542958] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
638[ 19.554015] mmc2: Command Queue Engine enabled
639[ 19.555156] mmc2: new HS200 MMC card at address 0001
640[ 19.559133] mmcblk2: mmc2:0001 DA4128 116 GiB
641[ 19.560281] mmcblk2boot0: mmc2:0001 DA4128 partition 1 4.00 MiB
642[ 19.561015] mmcblk2boot1: mmc2:0001 DA4128 partition 2 4.00 MiB
643[ 19.562318] mmcblk2rpmb: mmc2:0001 DA4128 partition 3 16.0 MiB, chardev (237:0)
644[ 19.566604] mmcblk2: p1 p2
645[ 19.582321] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 42
646[ 19.593281] mmc1: error -110 whilst initialising SD card
647[ 19.818925] mmc0: new ultra high speed SDR104 SDIO card at address 0001
648[ 19.890926] input: gpio-keys as /devices/platform/gpio-keys/input/input6
649[ 19.912020] rk808-rtc rk808-rtc: setting system clock to 2019-11-05T06:21:12 UTC (1572934872)
650[ 19.912812] of_cfs_init
651[ 19.913173] of_cfs_init: OK
652[ 19.914455] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
653[ 19.915221] cfg80211: failed to load regulatory.db
654[ 19.916408] ALSA device list:
655[ 19.916677] No soundcards found.
656[ 19.918058] ttyS2 - failed to request DMA
657[ 20.090674] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
658[ 20.097367] dwmmc_rockchip fe320000.dwmmc: Busy; trying anyway
659[ 20.361050] Waiting for root device PARTUUID=efb5a310-01...
660[ 20.364934] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.bin failed with error -2
661[ 20.599473] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
662[ 20.617477] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
663[ 21.164381] dwmmc_rockchip fe320000.dwmmc: Busy; trying anyway
664[ 21.386453] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
665[ 21.666301] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
666[ 21.684546] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
667[ 22.235455] dwmmc_rockchip fe320000.dwmmc: Busy; trying anyway
668[ 22.736937] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
669[ 22.755471] mmc_host mmc1: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
670[ 23.326532] dwmmc_rockchip fe320000.dwmmc: Busy; trying anyway
671[ 23.828015] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)