· 9 years ago · Dec 04, 2016, 04:24 PM
1<6>[ 0.000000] Booting Linux on physical CPU 0x0
2<6>[ 0.000000] Initializing cgroup subsys cpu
3<6>[ 0.000000] Initializing cgroup subsys cpuacct
4<5>[ 0.000000] Linux version 4.4.16-perf+ (arter97@arter97-X99) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #2 SMP PREEMPT Mon Dec 5 01:11:10 KST 2016
5<6>[ 0.000000] Boot CPU: AArch64 Processor [511f2112]
6<6>[ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP
7<6>[ 0.000000] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB
8<6>[ 0.000000] Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 43 MiB
9<6>[ 0.000000] Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 98 MiB
10<6>[ 0.000000] Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB
11<6>[ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
12<6>[ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
13<6>[ 0.000000] Reserved memory: reserved region for node 'ramoops_mem@ac000000': base 0x00000000ac000000, size 2 MiB
14<6>[ 0.000000] Reserved memory: reserved region for node 'param_mem@ac200000': base 0x00000000ac200000, size 1 MiB
15<6>[ 0.000000] Reserved memory: reserved region for node 'bootloader_log_mem@ac300000': base 0x00000000ac300000, size 1 MiB
16<6>[ 0.000000] Reserved memory: reserved region for node 'mtp_mem@ac400000': base 0x00000000ac400000, size 1 MiB
17<6>[ 0.000000] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
18<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
19<6>[ 0.000000] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
20<6>[ 0.000000] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
21<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
22<6>[ 0.000000] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
23<6>[ 0.000000] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
24<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
25<6>[ 0.000000] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
26<6>[ 0.000000] Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB
27<6>[ 0.000000] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
28<6>[ 0.000000] Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB
29<6>[ 0.000000] Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
30<6>[ 0.000000] Removed memory: created DMA memory pool at 0x000000008ea00000, size 43 MiB
31<6>[ 0.000000] Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
32<6>[ 0.000000] cma: Reserved 32 MiB at 0x00000000f6800000
33<7>[ 0.000000] On node 0 totalpages: 1514576
34<7>[ 0.000000] DMA zone: 11532 pages used for memmap
35<7>[ 0.000000] DMA zone: 0 pages reserved
36<7>[ 0.000000] DMA zone: 738048 pages, LIFO batch:31
37<7>[ 0.000000] Normal zone: 12134 pages used for memmap
38<7>[ 0.000000] Normal zone: 776528 pages, LIFO batch:31
39<6>[ 0.000000] psci: probing for conduit method from DT.
40<6>[ 0.000000] psci: PSCIv1.0 detected in firmware.
41<6>[ 0.000000] psci: Using standard PSCI v0.2 function IDs
42<6>[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
43<6>[ 0.000000] psci: Initializing psci_cpu_init
44<6>[ 0.000000] psci: Initializing psci_cpu_init
45<6>[ 0.000000] psci: Initializing psci_cpu_init
46<6>[ 0.000000] PERCPU: Embedded 19 pages/cpu @ffffffc17d6aa000 s48152 r0 d29672 u77824
47<7>[ 0.000000] pcpu-alloc: s48152 r0 d29672 u77824 alloc=19*4096
48<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
49<6>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1490910
50<5>[ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 rcupdate.rcu_expedited=1 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=e684a180 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd:1:none:cfg:single_dsi androidboot.startupmode=pon1 androidboot.mode=fastboot androidboot.project_name=15801 androidboot.rf_version=21 androidboot.hw_version=16 ddr_manufacture_info=Samsung ddr_row0_info=16 androidboot.pcba_number=001580206616032500018090 androidboot.enable_dm_verity=1 androidboot.secboot=enabled
51<6>[ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
52<6>[ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
53<6>[ 0.000000] log_buf_len min size: 131072 bytes
54<6>[ 0.000000] log_buf_len: 262144 bytes
55<6>[ 0.000000] early log buf free: 125884(96%)
56<6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
57<6>[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
58<6>[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
59<6>[ 0.000000] software IO TLB [mem 0xf2800000-0xf6800000] (64MB) mapped at [ffffffc0b2800000-ffffffc0b67fffff]
60<6>[ 0.000000] Memory: 5616708K/6058304K available (11690K kernel code, 1778K rwdata, 5332K rodata, 704K init, 2529K bss, 290044K reserved, 151552K cma-reserved)
61<5>[ 0.000000] Virtual kernel memory layout:
62<5>[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
63<5>[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
64<5>[ 0.000000] .init : 0xffffff8009120000 - 0xffffff80091d0000 ( 704 KB)
65<5>[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008be0000 ( 11648 KB)
66<5>[ 0.000000] .rodata : 0xffffff8008be0000 - 0xffffff8009120000 ( 5376 KB)
67<5>[ 0.000000] .data : 0xffffff80091d0000 - 0xffffff800938c8c8 ( 1779 KB)
68<5>[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
69<5>[ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc5f65400 ( 95 MB actual)
70<5>[ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
71<5>[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
72<5>[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc17d950000 ( 6105 MB)
73<6>[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
74<6>[ 0.000000] HMP scheduling enabled.
75<6>[ 0.000000] Preemptible hierarchical RCU implementation.
76<6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
77<4>[ 0.000000]
78<4>[ 0.000000] **********************************************************
79<4>[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
80<4>[ 0.000000] ** **
81<4>[ 0.000000] ** trace_printk() being used. Allocating extra memory. **
82<4>[ 0.000000] ** **
83<4>[ 0.000000] ** This means that this is a DEBUG kernel and it is **
84<4>[ 0.000000] ** unsafe for production use. **
85<4>[ 0.000000] ** **
86<4>[ 0.000000] ** If you see this message and you are not debugging **
87<4>[ 0.000000] ** the kernel, report this immediately to your vendor! **
88<4>[ 0.000000] ** **
89<4>[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
90<4>[ 0.000000] **********************************************************
91<6>[ 0.000000] NR_IRQS:64 nr_irqs:64 0
92<4>[ 0.000000] ITS: No ITS available, not enabling LPIs
93<4>[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
94<3>[ 0.000000] MPM 1 irq mapping errored -517
95<6>[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
96<6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
97<6>[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
98<6>[ 0.000664] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
99<6>[ 0.000675] pid_max: default: 32768 minimum: 301
100<6>[ 0.000736] Security Framework initialized
101<6>[ 0.000746] SELinux: Initializing.
102<7>[ 0.000779] SELinux: Starting in permissive mode
103<6>[ 0.000813] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
104<6>[ 0.000821] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
105<6>[ 0.001311] Initializing cgroup subsys freezer
106<4>[ 0.001581] /cpus/cpu@0: Unknown CPU type
107<4>[ 0.001589] /cpus/cpu@1: Unknown CPU type
108<4>[ 0.001596] /cpus/cpu@100: Unknown CPU type
109<4>[ 0.001605] /cpus/cpu@101: Unknown CPU type
110<6>[ 0.001644] ASID allocator initialised with 65536 entries
111<6>[ 0.051841] Configuring XPU violations to be fatal errors
112<6>[ 0.052266] MSM Memory Dump base table set up
113<6>[ 0.052282] MSM Memory Dump apps data table set up
114<6>[ 0.053802] clock-cpu-8996: configuring clocks for the perf cluster
115<6>[ 0.053952] cpu_clock_8996_early_init: finished CPU clock configuration
116<6>[ 0.080366] CPU1: Booted secondary processor [511f2112]
117<6>[ 0.080480] _cpu_up by swapper/0[1]
118<6>[ 0.110555] CPU2: Booted secondary processor [511f2052]
119<6>[ 0.110682] _cpu_up by swapper/0[1]
120<6>[ 0.140311] CPU3: Booted secondary processor [511f2052]
121<6>[ 0.140425] _cpu_up by swapper/0[1]
122<6>[ 0.140438] Brought up 4 CPUs
123<6>[ 0.140444] SMP: Total of 4 processors activated.
124<6>[ 0.140452] CPU features: detected feature: GIC system register CPU interface
125<6>[ 0.140461] CPU: All CPU(s) started at EL1
126<6>[ 0.211038] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
127<6>[ 0.225945] pinctrl core: initialized pinctrl subsystem
128<6>[ 0.226881] NET: Registered protocol family 16
129<6>[ 0.228816] cpuidle: using governor ladder
130<6>[ 0.228834] cpuidle: using governor menu
131<6>[ 0.228849] cpuidle: using governor qcom
132<6>[ 0.229671] vdso: 2 pages (1 code @ ffffff8008be6000, 1 data @ ffffff80091d4000)
133<6>[ 0.230532] DMA: preallocated 256 KiB pool for atomic allocations
134<3>[ 0.230647] msm_smem_init: unable to create logging context
135<3>[ 0.230684] msm_smd_init: unable to create SMD logging context
136<3>[ 0.230690] msm_smd_init: unable to create SMSM logging context
137<3>[ 0.240131] <CORE> glink_init: unable to create log context
138<3>[ 0.240335] <CORE> glink_core_register_transport: unable to create log context for [dsps:smd_trans]
139<3>[ 0.240434] <CORE> glink_core_register_transport: unable to create log context for [lpass:smd_trans]
140<3>[ 0.240530] <CORE> glink_core_register_transport: unable to create log context for [mpss:smd_trans]
141<3>[ 0.240632] <CORE> glink_core_register_transport: unable to create log context for [wcnss:smd_trans]
142<3>[ 0.240725] <CORE> glink_core_register_transport: unable to create log context for [rpm:smd_trans]
143<3>[ 0.241560] Failed to create IPC log0
144<3>[ 0.241568] Failed to create IPC log1
145<3>[ 0.241573] Failed to create IPC log2
146<3>[ 0.241578] Failed to create IPC log3
147<3>[ 0.241583] Failed to create IPC log4
148<4>[ 0.243212] irq: no irq domain found for /soc/qcom,mdss_mdp@900000 !
149<6>[ 0.254431] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
150<6>[ 0.261260] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
151<6>[ 0.262368] sps:sps is ready.
152<6>[ 0.263063] i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_12/i2c_12_active, deferring probe
153<6>[ 0.263933] i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_active, deferring probe
154<6>[ 0.264342] i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe
155<6>[ 0.264748] i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
156<3>[ 0.265004] genirq: Setting trigger mode 12 for irq 29 failed (gic_set_type+0x0/0xbc)
157<3>[ 0.266562] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
158<3>[ 0.298399] smd_channel_probe_now: allocation table not initialized
159<3>[ 0.298723] smd_channel_probe_now: allocation table not initialized
160<3>[ 0.299027] smd_channel_probe_now: allocation table not initialized
161<3>[ 0.299326] smd_channel_probe_now: allocation table not initialized
162<6>[ 0.299620] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
163<6>[ 0.299682] msm_watchdog 9830000.qcom,wdt: No need to allocate memory for scandumps
164<6>[ 0.299921] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
165<6>[ 0.300877] msm_rpm_dev_probe: APSS-RPM communication over GLINK
166<6>[ 0.309635] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
167<6>[ 0.310129] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
168<6>[ 0.311292] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
169<6>[ 0.311976] platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
170<6>[ 0.314427] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
171<6>[ 0.314519] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
172<3>[ 0.314527] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
173<6>[ 0.314537] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
174<6>[ 0.319502] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
175<3>[ 0.320755] <CORE> glink_core_register_transport: unable to create log context for [mpss:smem]
176<3>[ 0.321604] <CORE> glink_core_register_transport: unable to create log context for [lpass:smem]
177<3>[ 0.322471] <CORE> glink_core_register_transport: unable to create log context for [dsps:smem]
178<3>[ 0.323100] <CORE> glink_core_register_transport: unable to create log context for [rpm:smem]
179<3>[ 0.323226] smd_channel_probe_now: allocation table not initialized
180<6>[ 0.323608] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
181<6>[ 0.328389] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
182<6>[ 0.329063] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
183<6>[ 0.334367] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
184<3>[ 0.336059] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
185<4>[ 0.357996] __of_mpm_init(): MPM driver mapping exists
186<6>[ 0.359541] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
187<3>[ 0.359685] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
188<3>[ 0.359696] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
189<3>[ 0.360335] ramoops soc:ramoops: no memory-region phandle
190<6>[ 0.371438] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
191<6>[ 0.372060] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
192<3>[ 0.372169] i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
193<3>[ 0.372180] i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
194<6>[ 0.372589] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
195<3>[ 0.372681] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
196<3>[ 0.372691] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
197<6>[ 0.373090] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
198<3>[ 0.373180] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
199<3>[ 0.373190] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
200<6>[ 0.373551] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
201<3>[ 0.373642] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
202<3>[ 0.373651] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
203<3>[ 0.373850] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
204<3>[ 0.396334] Error-Bad Function Input
205<3>[ 0.396830] Error-Bad Function Input
206<6>[ 0.397552] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
207<6>[ 0.397837] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
208<3>[ 0.397847] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
209<6>[ 0.397857] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
210<3>[ 0.398369] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
211<6>[ 0.399014] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
212<3>[ 0.399140] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
213<3>[ 0.399151] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
214<6>[ 0.399640] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
215<3>[ 0.399732] i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
216<3>[ 0.399741] i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
217<6>[ 0.400122] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
218<3>[ 0.400211] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
219<3>[ 0.400220] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
220<6>[ 0.400620] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
221<3>[ 0.400707] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
222<3>[ 0.400717] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
223<6>[ 0.401263] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
224<3>[ 0.401364] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
225<3>[ 0.401374] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
226<3>[ 0.401746] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
227<6>[ 0.421711] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
228<6>[ 0.422922] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
229<6>[ 0.423160] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
230<6>[ 0.423315] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
231<6>[ 0.423823] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
232<6>[ 0.424053] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
233<6>[ 0.424207] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
234<6>[ 0.424738] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
235<6>[ 0.424964] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
236<6>[ 0.425042] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
237<6>[ 0.435240] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
238<6>[ 0.437116] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
239<6>[ 0.437420] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
240<3>[ 0.437430] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
241<6>[ 0.437441] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
242<6>[ 0.438059] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
243<6>[ 0.438071] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
244<6>[ 0.438079] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
245<6>[ 0.438087] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
246<6>[ 0.438094] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
247<6>[ 0.438104] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
248<6>[ 0.438321] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
249<6>[ 0.438557] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 615000 uV
250<6>[ 0.438566] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 685000 uV
251<6>[ 0.438573] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 795000 uV
252<6>[ 0.438580] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 920000 uV
253<6>[ 0.438696] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 359
254<6>[ 0.438704] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 481, quot_offset[ 7]= 115
255<6>[ 0.438712] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 705, quot_offset[ 7]= 220
256<6>[ 0.438719] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 934, quot_offset[ 7]= 225
257<6>[ 0.438896] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
258<6>[ 0.438904] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
259<6>[ 0.438911] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
260<6>[ 0.438919] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
261<6>[ 0.438926] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
262<6>[ 0.438935] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
263<6>[ 0.439091] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 615000 uV
264<6>[ 0.439098] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 685000 uV
265<6>[ 0.439104] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 795000 uV
266<6>[ 0.439111] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 920000 uV
267<6>[ 0.439161] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 359
268<6>[ 0.439169] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 481, quot_offset[ 7]= 115
269<6>[ 0.439176] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 705, quot_offset[ 7]= 220
270<6>[ 0.439183] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 934, quot_offset[ 7]= 225
271<6>[ 0.439320] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
272<6>[ 0.439327] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
273<6>[ 0.439335] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
274<6>[ 0.439342] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
275<6>[ 0.439350] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
276<6>[ 0.439359] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
277<6>[ 0.439594] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
278<6>[ 0.439845] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 605000 uV
279<6>[ 0.439854] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 665000 uV
280<6>[ 0.439861] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 725000 uV
281<6>[ 0.439867] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop= 990000 uV
282<6>[ 0.440024] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 336
283<6>[ 0.440032] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 436, quot_offset[ 7]= 95
284<6>[ 0.440040] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 558, quot_offset[ 7]= 120
285<6>[ 0.440047] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1055, quot_offset[ 7]= 495
286<6>[ 0.440649] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
287<6>[ 0.611404] cpr3_regulator_measure_aging: apcc: average quotient delta=6 (count=10)
288<6>[ 0.611437] cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=1250 uV
289<6>[ 0.613770] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
290<6>[ 0.613784] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
291<6>[ 0.614160] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 650000 uV
292<6>[ 0.614167] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 705000 uV
293<6>[ 0.614174] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 825000 uV
294<6>[ 0.614180] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 915000 uV
295<6>[ 0.614370] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
296<6>[ 0.622098] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
297<3>[ 0.622252] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
298<6>[ 0.622262] i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
299<3>[ 0.622935] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
300<6>[ 0.623562] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
301<3>[ 0.623691] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
302<6>[ 0.623700] i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
303<3>[ 0.624204] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
304<6>[ 0.624721] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
305<3>[ 0.624843] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
306<6>[ 0.624852] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
307<3>[ 0.625301] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
308<6>[ 0.625972] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
309<3>[ 0.626095] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
310<6>[ 0.626104] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
311<3>[ 0.626581] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
312<6>[ 0.627209] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
313<3>[ 0.627332] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
314<6>[ 0.627341] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
315<3>[ 0.627763] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
316<6>[ 0.628659] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
317<6>[ 0.631205] clock-cpu-8996: set OPP pair (307200000 Hz, 635000 uv) on cpu0
318<6>[ 0.632311] clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on cpu0
319<6>[ 0.632415] clock-cpu-8996: set OPP pair (307200000 Hz, 635000 uv) on cpu1
320<6>[ 0.633485] clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on cpu1
321<6>[ 0.633576] clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu2
322<6>[ 0.635293] clock-cpu-8996: set OPP pair (2150400000 Hz, 975000 uv) on cpu2
323<6>[ 0.635401] clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu3
324<6>[ 0.637117] clock-cpu-8996: set OPP pair (2150400000 Hz, 975000 uv) on cpu3
325<6>[ 0.637461] clock-cpu-8996: set OPP pair (307200000 Hz, 660000 uv) on soc:qcom,m4m
326<6>[ 0.638749] clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on soc:qcom,m4m
327<6>[ 0.639301] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
328<6>[ 0.639858] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 580000 uV) on b00000.qcom,kgsl-3d0
329<6>[ 0.640298] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 915000 uV) on b00000.qcom,kgsl-3d0
330<6>[ 0.652142] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
331<6>[ 0.652307] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
332<3>[ 0.652605] msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
333<6>[ 0.652620] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
334<6>[ 0.653156] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
335<6>[ 0.653171] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
336<3>[ 0.672332] qcom,qpnp-pwm 400f000.qcom,spmi:qcom,pmi8994@3:pwm@b100: Error reading qcom,lpg-lut-size, rc=-22
337<3>[ 0.672344] qpnp_pwm_probe: Failed parsing DT parameters, rc=-22
338<4>[ 0.672361] qcom,qpnp-pwm: probe of 400f000.qcom,spmi:qcom,pmi8994@3:pwm@b100 failed with error -22
339<3>[ 0.672421] qcom,qpnp-pwm 400f000.qcom,spmi:qcom,pmi8994@3:pwm@b200: Error reading qcom,lpg-lut-size, rc=-22
340<3>[ 0.672427] qpnp_pwm_probe: Failed parsing DT parameters, rc=-22
341<4>[ 0.672440] qcom,qpnp-pwm: probe of 400f000.qcom,spmi:qcom,pmi8994@3:pwm@b200 failed with error -22
342<3>[ 0.672496] qcom,qpnp-pwm 400f000.qcom,spmi:qcom,pmi8994@3:pwm@b300: Error reading qcom,lpg-lut-size, rc=-22
343<3>[ 0.672503] qpnp_pwm_probe: Failed parsing DT parameters, rc=-22
344<4>[ 0.672514] qcom,qpnp-pwm: probe of 400f000.qcom,spmi:qcom,pmi8994@3:pwm@b300 failed with error -22
345<3>[ 0.672571] qcom,qpnp-pwm 400f000.qcom,spmi:qcom,pmi8994@3:pwm@b400: Error reading qcom,lpg-lut-size, rc=-22
346<3>[ 0.672577] qpnp_pwm_probe: Failed parsing DT parameters, rc=-22
347<4>[ 0.672589] qcom,qpnp-pwm: probe of 400f000.qcom,spmi:qcom,pmi8994@3:pwm@b400 failed with error -22
348<6>[ 0.673239] ACPI: Interpreter disabled.
349<6>[ 0.673775] KPI: Bootloader start count = 33936
350<6>[ 0.673782] KPI: Bootloader end count = 439545
351<6>[ 0.673788] KPI: Bootloader display count = 65544
352<6>[ 0.673793] KPI: Bootloader load kernel count = 2437
353<6>[ 0.673802] KPI: Kernel MPM timestamp = 469853
354<6>[ 0.673807] KPI: Kernel MPM Clock frequency = 32768
355<6>[ 0.673828] socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=65536
356<6>[ 0.673828] accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=1467222652 num_pmics=2
357<3>[ 0.673841] msm_bus_fabric_init_driver
358<3>[ 0.680785] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
359<3>[ 0.680835] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
360<3>[ 0.681417] msm-bus-type fab-mnoc-ahb: Error: Failed to get regulator bus-gdsc:-517
361<3>[ 0.681465] msm-bus-type fab-mnoc-ahb: Error: Failed to get regulator bus-a-gdsc:-517
362<3>[ 0.687356] msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
363<3>[ 0.688458] msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
364<3>[ 0.702271] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
365<3>[ 0.702322] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
366<3>[ 0.702371] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
367<3>[ 0.702486] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
368<3>[ 0.702533] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
369<3>[ 0.702578] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
370<3>[ 0.702622] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
371<3>[ 0.702667] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
372<3>[ 0.702711] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
373<3>[ 0.702755] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
374<3>[ 0.704687] init_project_info: project_name: 15801 hw_version: 16 rf_v1: 21 rf_v2: 1: rf_v3: 0
375<3>[ 0.704697] init_project_info: aboard_version: 1
376<6>[ 0.705501] op_rf_cable soc:oneplus_rf_cable: rf,cable-gpio - gpio: 131
377<3>[ 0.705727] requested irq 343
378<3>[ 0.705752] modify_rf_cable_smem_info: rf_cable: 0
379<3>[ 0.705762] op_rf_cable_probe: probe ok!
380<6>[ 0.707575] vgaarb: loaded
381<5>[ 0.708997] SCSI subsystem initialized
382<6>[ 0.710033] usbcore: registered new interface driver usbfs
383<6>[ 0.710072] usbcore: registered new interface driver hub
384<6>[ 0.710239] usbcore: registered new device driver usb
385<6>[ 0.710623] qcom,qpnp-power-on 400f000.qcom,spmi:qcom,pm8994@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
386<6>[ 0.710648] qcom,qpnp-power-on 400f000.qcom,spmi:qcom,pm8994@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
387<6>[ 0.710862] input: qpnp_pon as /devices/virtual/input/input0
388<6>[ 0.721914] qcom,qpnp-power-on 400f000.qcom,spmi:qcom,pmi8994@2:qcom,power-on@800: No PON config. specified
389<6>[ 0.721978] qcom,qpnp-power-on 400f000.qcom,spmi:qcom,pmi8994@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from Hard Reset and 'warm' boot
390<6>[ 0.721998] qcom,qpnp-power-on 400f000.qcom,spmi:qcom,pmi8994@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
391<6>[ 0.722826] media: Linux media interface: v0.10
392<6>[ 0.722873] Linux video capture interface: v2.00
393<6>[ 0.725265] cpufreq: driver msm up and running
394<6>[ 0.725906] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
395<6>[ 0.726450] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
396<6>[ 0.726995] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
397<6>[ 0.727628] ION heap system created
398<6>[ 0.727759] ION heap adsp created at 0x00000000ff800000 with size 400000
399<6>[ 0.727769] ION heap qsecom created at 0x00000000fe400000 with size 1400000
400<6>[ 0.727778] ION heap secure_display created at 0x00000000f8800000 with size 5c00000
401<6>[ 0.727786] ION heap secure_heap created
402<6>[ 0.728978] PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
403<6>[ 0.729086] PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
404<3>[ 0.731295] ipa ipa2_uc_state_check:296 uC interface not initialized
405<3>[ 0.731351] ipa ipa_sps_irq_control_all:959 EP (2) not allocated.
406<3>[ 0.731355] ipa ipa_sps_irq_control_all:959 EP (5) not allocated.
407<3>[ 0.732987] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000000684000
408<3>[ 0.732998] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000000684000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000000684000
409<3>[ 0.733008] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000000684000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000000684000
410<6>[ 0.733020] sps:BAM 0x0000000000684000 is registered.<3>[ 0.733694] ipa ipa2_uc_state_check:296 uC interface not initialized
411<6>[ 0.733885] sps:BAM 0x0000000000684000 (va:0xffffff8009ac0000) enabled: ver:0x27, number of pipes:20
412<3>[ 0.742834] ipa ipa2_uc_state_check:296 uC interface not initialized
413<3>[ 0.752078] ipa ipa2_uc_state_check:296 uC interface not initialized
414<6>[ 0.753721] IPA driver initialization was successful.
415<6>[ 0.755667] gdsc_venus: supplied by gdsc_mmagic_video
416<6>[ 0.756298] gdsc_camss_top: supplied by gdsc_mmagic_camss
417<6>[ 0.756540] gdsc_vfe0: supplied by gdsc_camss_top
418<6>[ 0.756754] gdsc_vfe1: supplied by gdsc_camss_top
419<6>[ 0.756995] gdsc_mdss: supplied by gdsc_mmagic_mdss
420<6>[ 0.757380] gdsc_jpeg: supplied by gdsc_camss_top
421<6>[ 0.757604] gdsc_cpp: supplied by gdsc_camss_top
422<6>[ 0.758725] gdsc_fd: supplied by gdsc_camss_top
423<6>[ 0.759410] gdsc_gpu_gx: supplied by gfx_corner
424<6>[ 0.762413] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
425<6>[ 0.762432] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
426<6>[ 0.764551] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
427<6>[ 0.764614] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
428<6>[ 0.764620] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
429<3>[ 0.771749] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
430<6>[ 0.772351] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
431<6>[ 0.887067] iommu: Adding device 600000.qcom,pcie to group 0
432<6>[ 0.887835] iommu: Adding device soc:qcom,msm-audio-ion to group 1
433<6>[ 0.888813] iommu: Adding device soc:iommu_test_device to group 2
434<6>[ 0.890682] Advanced Linux Sound Architecture Driver Initialized.
435<6>[ 0.891319] Bluetooth: ffffffc17661fd30
436<6>[ 0.891402] NET: Registered protocol family 31
437<6>[ 0.891406] Bluetooth: ffffffc17661fd30
438<6>[ 0.891416] Bluetooth: ffffffc17661fd10Bluetooth: ffffffc17661fcf0
439<6>[ 0.891455] Bluetooth: ffffffc17661fcf0<6>[ 0.892108] cfg80211: World regulatory domain updated:
440<6>[ 0.892114] cfg80211: DFS Master region: unset
441<6>[ 0.892120] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
442<6>[ 0.892128] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
443<6>[ 0.892133] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
444<6>[ 0.892137] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
445<6>[ 0.892141] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
446<6>[ 0.892144] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
447<6>[ 0.892147] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
448<6>[ 0.892150] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
449<6>[ 0.892153] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
450<1>[ 0.892193] pcie:pcie_init.
451<3>[ 0.892198] pcie_init: unable to create IPC log context for pcie0-short
452<3>[ 0.892202] pcie_init: unable to create IPC log context for pcie0-long
453<3>[ 0.892205] pcie_init: unable to create IPC log context for pcie0-dump
454<3>[ 0.892209] pcie_init: unable to create IPC log context for pcie1-short
455<3>[ 0.892211] pcie_init: unable to create IPC log context for pcie1-long
456<3>[ 0.892214] pcie_init: unable to create IPC log context for pcie1-dump
457<3>[ 0.892217] pcie_init: unable to create IPC log context for pcie2-short
458<3>[ 0.892220] pcie_init: unable to create IPC log context for pcie2-long
459<3>[ 0.892222] pcie_init: unable to create IPC log context for pcie2-dump
460<4>[ 0.894300] 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
461<3>[ 0.896904] msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
462<6>[ 0.899584] clocksource: Switched to clocksource arch_sys_counter
463<6>[ 0.935381] pnp: PnP ACPI: disabled
464<6>[ 0.941593] NET: Registered protocol family 2
465<6>[ 0.942196] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
466<6>[ 0.942380] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
467<6>[ 0.943301] TCP: Hash tables configured (established 65536 bind 65536)
468<6>[ 0.943504] UDP hash table entries: 4096 (order: 5, 131072 bytes)
469<6>[ 0.943587] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
470<6>[ 0.944056] NET: Registered protocol family 1
471<7>[ 0.944125] PCI: CLS 0 bytes, default 128
472<6>[ 0.944705] Trying to unpack rootfs image as initramfs...
473<6>[ 1.143551] Freeing initrd memory: 9584K (ffffffc002200000 - ffffffc002b5c000)
474<6>[ 1.145559] kryo perfevents: CPU pmu for kryo-pmuv3 detected
475<6>[ 1.145947] hw perfevents: enabled with qcom,kryo-pmuv3 PMU driver, 9 counters available
476<6>[ 1.151652] futex hash table entries: 1024 (order: 5, 131072 bytes)
477<6>[ 1.151767] audit: initializing netlink subsys (disabled)
478<5>[ 1.151883] audit: type=2000 audit(1.139:1): initialized
479<4>[ 1.152163] vmscan: error setting kswapd cpu affinity mask
480<6>[ 1.156027] ntfs: driver 2.1.32 [Flags: R/O].
481<6>[ 1.156128] fuse init (API version 7.23)
482<6>[ 1.156272] exFAT: Version 1.2.9
483<7>[ 1.156333] SELinux: Registering netfilter hooks
484<6>[ 1.160012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
485<6>[ 1.160022] io scheduler noop registered
486<6>[ 1.160027] io scheduler deadline registered
487<6>[ 1.160133] io scheduler cfq registered (default)
488<6>[ 1.160139] io scheduler test-iosched registered
489<3>[ 1.170462] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
490<3>[ 1.170496] mdss_mdp_probe+0x244/0x1170->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
491<3>[ 1.171310] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
492<3>[ 1.171349] mdss_mdp_irq_clk_register: unable to get clk: mnoc_clk
493<3>[ 1.172609] No change in context(0==0), skip
494<6>[ 1.173615] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
495<6>[ 1.173619] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
496<6>[ 1.173622] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
497<6>[ 1.173626] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
498<6>[ 1.173643] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
499<6>[ 1.173646] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
500<6>[ 1.173649] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
501<6>[ 1.173652] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
502<6>[ 1.173665] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
503<6>[ 1.173669] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
504<3>[ 1.173675] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
505<3>[ 1.173740] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
506<6>[ 1.174096] xlog_status: enable:0, panic:1, dump:2
507<6>[ 1.174685] iommu: Adding device 900000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 3
508<6>[ 1.174976] iommu: Adding device 900000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 4
509<6>[ 1.175079] mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on
510<6>[ 1.178349] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
511<6>[ 1.178522] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
512<6>[ 1.181790] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
513<6>[ 1.182209] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd
514<6>[ 1.182220] mdss_dsi_panel_init: Panel Name = samsung s6e3fa3 1080p cmd mode dsi panel
515<6>[ 1.182310] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd" (ffffffc17661f350)
516<3>[ 1.182325] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
517<4>[ 1.182329] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
518<6>[ 1.182398] mdss_dsi_parse_partial_update_caps: partial_update_enabled=0
519<6>[ 1.182403] mdss_dsi_parse_panel_features: ulps feature enabled
520<6>[ 1.182409] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
521<6>[ 1.182413] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
522<4>[ 1.182432] mdss_dsi_set_refresh_rate_range:2041, Unable to read min refresh rate
523<4>[ 1.182437] mdss_dsi_set_refresh_rate_range:2056, Unable to read max refresh rate
524<6>[ 1.182440] dyn_fps: min = 60, max = 60
525<3>[ 1.182683] mdss_dsi_parse_ctrl_params:4027 Unable to read qcom,display-id, data=0000000000000000,len=20
526<6>[ 1.182720] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
527<3>[ 1.182765] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
528<3>[ 1.182780] mdss_dsi_retrieve_ctrl_resources+0x168/0x1c4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
529<6>[ 1.182784] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8009bda000 ctrl_size=400 phy_base=ffffff8009bdc400 phy_size=588
530<6>[ 1.182961] dsi_panel_device_register: Continuous splash enabled
531<6>[ 1.183512] mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
532<6>[ 1.184746] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
533<6>[ 1.186182] mdss_dsi_status_init: DSI status check interval:5000
534<3>[ 1.187642] mdss_register_panel: Unable to find fb node for device: soc:qcom,mdss_wb_panel
535<3>[ 1.187654] mdss_wb soc:qcom,mdss_wb_panel: unable to register writeback panel
536<6>[ 1.189058] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
537<6>[ 1.189693] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
538<4>[ 1.189962] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
539<3>[ 1.195424] glink_loopback_server_init: unable to create log context
540<3>[ 1.195728] msm_smp2p_init: unable to create log context
541<3>[ 1.198257] qmi_log_init: Unable to create QMI IPC logging for Req/Resp
542<3>[ 1.198269] logging for Indications: Unable to create QMI IPC qmi_log_init<3>[ 1.204813] apr_init: Unable to create ipc log context
543<3>[ 1.204823] subsys_notif_register: Audio notifier register failed for domain 0 ret = -19
544<3>[ 1.204827] subsys_notif_register: Audio notifier register failed for domain 1 ret = -19
545<6>[ 1.210666] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
546<6>[ 1.210841] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
547<6>[ 1.210983] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
548<6>[ 1.211026] In memshare_probe, Memshare probe success
549<6>[ 1.213277] subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
550<6>[ 1.214043] subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
551<3>[ 1.215830] smd_channel_probe_now: allocation table not initialized
552<6>[ 1.215944] pil-q6v5-mss 2080000.qcom,mss: No pas_id found.
553<3>[ 1.222037] msm_rpmstats_create_sysfs: Cannot find module_kset
554<5>[ 1.225188] msm_rpm_log_probe: OK
555<3>[ 1.226519] uart_tx_gpio is not available
556<3>[ 1.226531] uart_rx_gpio is not available
557<3>[ 1.226535] uart_cts_gpio is not available
558<3>[ 1.226538] uart_rfr_gpio is not available
559<3>[ 1.226614] msm_serial_hs 7570000.uart: Error -6, invalid bam irq resources.
560<6>[ 1.227479] msm_serial_hs module loaded
561<3>[ 1.227499] smd_tty_log_init: Unable to create IPC log
562<3>[ 1.231074] diag: Failed to create IPC logging context
563<3>[ 1.240148] Error: Driver 'DIAG_CMD' is already registered, aborting...
564<3>[ 1.240163] <CORE> smd_trans:mpss:DIAG_CMD[4:0] glink_open: Unable to send open command -16
565<3>[ 1.244822] Error: Driver 'DIAG_CMD' is already registered, aborting...
566<3>[ 1.244842] <CORE> smd_trans:lpass:DIAG_CMD[4:0] glink_open: Unable to send open command -16
567<3>[ 1.246999] Error: Driver 'DIAG_CMD' is already registered, aborting...
568<3>[ 1.247016] <CORE> smd_trans:wcnss:DIAG_CMD[3:0] glink_open: Unable to send open command -16
569<6>[ 1.247482] iommu: Adding device b40000.qcom,kgsl-iommu:gfx3d_user to group 5
570<6>[ 1.247939] iommu: Adding device b40000.qcom,kgsl-iommu:gfx3d_secure to group 6
571<3>[ 1.251345] Error: Driver 'DIAG_CMD' is already registered, aborting...
572<3>[ 1.251372] <CORE> smd_trans:dsps:DIAG_CMD[4:0] glink_open: Unable to send open command -16
573<6>[ 1.281767] brd: module loaded
574<6>[ 1.284294] loop: module loaded
575<6>[ 1.285354] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
576<4>[ 1.285396] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
577<6>[ 1.285403] QSEECOM: qseecom_probe: no-clock-support=0x1<4>[ 1.285407] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
578<4>[ 1.285864] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
579<3>[ 1.289505] gpio_dev_probe
580<3>[ 1.289692] i= 1 gpio=: 97
581<3>[ 1.289725] i= 2 gpio=: 98
582<3>[ 1.289770] i= 3 gpio=: 100
583<3>[ 1.289829] i= 4 gpio=: 115
584<3>[ 1.289901] i= 5 gpio=: 127
585<3>[ 1.289986] i= 6 gpio=: 133
586<3>[ 1.290085] i= 7 gpio=: 136
587<4>[ 1.290105] gpio_pinctrl_init
588<4>[ 1.290524] gpio_dev_probe ok!
589<6>[ 1.292447] Loading pn544 driver
590<6>[ 1.292641] Enter pn544_probe !!!
591<6>[ 1.292715] pn544_parse_dt: 9, 94, 12, 1015 ,1018, 0
592<6>[ 1.292840] successfully got regulator_s4
593<6>[ 1.293079] successfully set regulator voltage_s4
594<6>[ 1.293084] get BBCLK2!!!
595<6>[ 1.293119] clk_prepare_enable. ret = 0
596<6>[ 1.293272] pn544_probe : requesting IRQ 221
597<6>[ 1.293382] [NXP-P61] : Entry : p61_dev_init
598<6>[ 1.295689] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
599<6>[ 1.295705] qce 660000.qcedev: CE device = 0x0
600<6>[ 1.295705] , IO base, CE = 0xffffff800ab40000
601<6>[ 1.295705] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
602<6>[ 1.295705] IO base BAM = 0x (null)
603<6>[ 1.295705] BAM IRQ 105
604<6>[ 1.295705] Engines Availability = 0x2011053
605<3>[ 1.295744] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000000644000
606<3>[ 1.295749] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000000644000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000000644000
607<3>[ 1.295755] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000000644000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000000644000
608<6>[ 1.295763] sps:BAM 0x0000000000644000 is registered.<6>[ 1.295928] sps:BAM 0x0000000000644000 (va:0xffffff800abc0000) enabled: ver:0x27, number of pipes:16
609<6>[ 1.296143] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 105
610<3>[ 1.302962] Error: Driver 'qcrypto' is already registered, aborting...
611<4>[ 1.306295] ufshcd-qcom 624000.ufshc: ufs_qcom_init: ICE device is not enabled
612<3>[ 1.306796] scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
613<6>[ 1.308272] scsi host0: ufshcd
614<6>[ 1.331094] SCSI Media Changer driver v0.25
615<3>[ 1.334013] sps: BAM device 0x0000000007544000 is not registered yet.
616<3>[ 1.334041] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000007544000
617<3>[ 1.334045] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000007544000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000007544000
618<3>[ 1.334052] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000007544000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000007544000
619<6>[ 1.334060] sps:BAM 0x0000000007544000 is registered.<6>[ 1.335043] sps:BAM 0x0000000007544000 (va:0xffffff800ae40000) enabled: ver:0x19, number of pipes:24
620<6>[ 1.335411] [NXP-P61] : p61_probe chip select : 1 , bus number = 0
621<6>[ 1.335450] p61_parse_dt: 34, 21 0
622<6>[ 1.335455] [NXP-P61] : Entry : p61_hw_setup
623<6>[ 1.335486] [NXP-P61] : Exit : p61_hw_setup
624<6>[ 1.335607] [NXP-P61] : Entry : p61_disable_irq
625<6>[ 1.335612] [NXP-P61] : Exit : p61_disable_irq
626<6>[ 1.335614] [NXP-P61] : Exit : p61_probe
627<6>[ 1.336511] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
628<6>[ 1.337732] tun: Universal TUN/TAP device driver, 1.6
629<6>[ 1.337736] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
630<6>[ 1.337797] PPP generic driver version 2.4.2
631<6>[ 1.337857] PPP BSD Compression module registered
632<6>[ 1.337861] PPP Deflate Compression module registered
633<6>[ 1.337892] PPP MPPE Compression module registered
634<6>[ 1.337899] NET: Registered protocol family 24
635<3>[ 1.348849] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
636<6>[ 1.435506] PCI host bridge /soc/qcom,pcie@00600000 ranges:
637<6>[ 1.435525] No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
638<6>[ 1.435551] IO 0x0c200000..0x0c2fffff -> 0x0c200000
639<6>[ 1.435562] MEM 0x0c300000..0x0cffffff -> 0x0c300000
640<6>[ 1.435716] pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
641<6>[ 1.435725] pci_bus 0000:00: root bus resource [bus 00-ff]
642<6>[ 1.435733] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
643<6>[ 1.435739] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
644<7>[ 1.435775] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
645<3>[ 1.435819] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
646<7>[ 1.435827] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
647<7>[ 1.435895] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
648<6>[ 1.436061] iommu: Adding device 0000:00:00.0 to group 7
649<6>[ 1.436106] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
650<7>[ 1.436224] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
651<3>[ 1.436312] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
652<7>[ 1.436318] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
653<7>[ 1.436538] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
654<6>[ 1.436874] iommu: Adding device 0000:01:00.0 to group 8
655<7>[ 1.436898] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
656<3>[ 1.436984] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
657<6>[ 1.437009] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c5fffff]
658<6>[ 1.437016] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
659<6>[ 1.437034] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
660<6>[ 1.437188] pci 0000:00:00.0: PCI bridge to [bus 01]
661<6>[ 1.437214] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff]
662<6>[ 1.438657] cnss soc:qcom,cnss: for AR6320 segments only will be dumped.
663<6>[ 1.452488] cnss: Platform driver probed successfully.
664<6>[ 1.454978] usbcore: registered new interface driver asix
665<6>[ 1.455018] usbcore: registered new interface driver ax88179_178a
666<6>[ 1.455042] usbcore: registered new interface driver cdc_ether
667<6>[ 1.455066] usbcore: registered new interface driver net1080
668<6>[ 1.455092] usbcore: registered new interface driver cdc_subset
669<6>[ 1.455115] usbcore: registered new interface driver zaurus
670<6>[ 1.455275] usbcore: registered new interface driver cdc_ncm
671<6>[ 1.459015] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
672<6>[ 1.461437] msm_sharedmem: sharedmem_register_qmi: qmi init successful
673<3>[ 1.468098] msm-dwc3 6a00000.ssusb: unable to get dbm device
674<6>[ 1.471450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
675<6>[ 1.471463] ehci-pci: EHCI PCI platform driver
676<6>[ 1.471487] ehci-platform: EHCI generic platform driver
677<6>[ 1.472300] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
678<6>[ 1.472364] ohci-pci: OHCI PCI platform driver
679<6>[ 1.472404] ohci-platform: OHCI generic platform driver
680<6>[ 1.474159] usbcore: registered new interface driver usb-storage
681<6>[ 1.474221] usbcore: registered new interface driver usbserial
682<6>[ 1.476883] mousedev: PS/2 mouse device common for all mice
683<3>[ 1.478008] synaptics,s3320: tpd_driver_init enter
684<3>[ 1.478819] synaptics,s3320: before on cpu [2]
685<3>[ 1.478827] synaptics,s3320: check CPU[0] is [online]
686<3>[ 1.479487] touchkey,s1302: boot_time: before optimize [synaptics_ts_probe] on cpu 2
687<3>[ 1.479494] touchkey,s1302: boot_time: [synaptics_ts_probe] CPU0 is online
688<6>[ 1.481531] input: hbtp_vm as /devices/virtual/input/input1
689<3>[ 1.482534] switch_data->key3_gpio=1013
690<3>[ 1.482545] switch_data->key2_gpio=1012
691<3>[ 1.482554] switch_data->key1_gpio=1014
692<6>[ 1.483933] fpc1020_probe
693<6>[ 1.484145] fpc1020 soc:fpc_fpc1020: fpc,irq-gpio - gpio: 95
694<6>[ 1.484182] fpc1020 soc:fpc_fpc1020: fpc,reset-gpio - gpio: 86
695<6>[ 1.484205] fpc1020 soc:fpc_fpc1020: fpc,gpio_id0 - gpio: 25
696<3>[ 1.484208] fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id0_gpio=25)
697<6>[ 1.484240] fpc1020 soc:fpc_fpc1020: fpc,gpio_id1 - gpio: 143
698<3>[ 1.484243] fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id1_gpio=143)
699<6>[ 1.484270] fpc1020 soc:fpc_fpc1020: fpc,gpio_1V8_EN - gpio: 14
700<6>[ 1.484401] input: fpc1020 as /devices/virtual/input/input2
701<6>[ 1.484686] fpc1020 soc:fpc_fpc1020: requested irq 307
702<6>[ 1.484743] fpc1020 soc:fpc_fpc1020: fpc1020_probe: ok
703<6>[ 1.486345] qcom,qpnp-rtc 400f000.qcom,spmi:qcom,pm8994@0:qcom,pm8994_rtc: rtc core: registered qpnp_rtc as rtc0
704<6>[ 1.487273] i2c /dev entries driver
705<6>[ 1.490279] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 9
706<6>[ 1.490794] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb3 to group 10
707<6>[ 1.491030] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 11
708<6>[ 1.491243] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb5 to group 12
709<6>[ 1.491452] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb6 to group 13
710<6>[ 1.491664] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb7 to group 14
711<3>[ 1.499239] msm_camera_get_dt_vreg_data:1103 number of entries is 0 or not present in dts
712<3>[ 1.499970] msm_camera_get_dt_vreg_data:1103 number of entries is 0 or not present in dts
713<3>[ 1.500255] msm_camera_get_dt_vreg_data:1103 number of entries is 0 or not present in dts
714<3>[ 1.506144] failed: msm_camera_get_clk_info rc -12
715<4>[ 1.506161] qcom,eeprom: probe of a0c000.qcom,cci:qcom,eeprom@0 failed with error -12
716<3>[ 1.506769] CAM-SOC msm_camera_get_clk_info_internal:72 err: clk name/rates mismatch, strings=2, rates=18446744073709551594
717<3>[ 1.506774] failed: msm_camera_get_clk_info rc -22
718<4>[ 1.506780] qcom,eeprom: probe of a0c000.qcom,cci:qcom,eeprom@1 failed with error -22
719<3>[ 1.512623] CAM-SOC msm_camera_get_clk_info_internal:72 err: clk name/rates mismatch, strings=2, rates=18446744073709551594
720<3>[ 1.512636] failed: msm_camera_get_clk_info rc -22
721<4>[ 1.512652] qcom,camera: probe of a0c000.qcom,cci:qcom,camera@0 failed with error -22
722<3>[ 1.513002] CAM-SOC msm_camera_get_clk_info_internal:72 err: clk name/rates mismatch, strings=2, rates=18446744073709551594
723<3>[ 1.513006] failed: msm_camera_get_clk_info rc -22
724<4>[ 1.513014] qcom,camera: probe of a0c000.qcom,cci:qcom,camera@1 failed with error -22
725<6>[ 1.516175] MSM-CPP cpp_init_hardware:975 CPP HW Version: 0x60000000
726<3>[ 1.516189] MSM-CPP-SOC cpp_get_clk_freq_tbl_dt:96 Clock count is invalid
727<3>[ 1.516192] MSM-CPP-SOC msm_update_freq_tbl:185 msm_update_freq_tbl: fail to get frequency table
728<4>[ 1.516627] msm_cpp: probe of a04000.qcom,cpp failed with error -22
729<3>[ 1.529278] __msm_jpeg_init:1537] Jpeg Device id 0
730<3>[ 1.530602] __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
731<3>[ 1.535970] msm_fd_hw_set_dt_parms_by_name: Error property does not exist
732<3>[ 1.557389] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
733<5>[ 1.558172] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
734<5>[ 1.559387] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
735<5>[ 1.560558] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
736<4>[ 1.561432] ufs_get_capacity_info size = 0x7734000
737<5>[ 1.562979] scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
738<5>[ 1.564861] scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
739<5>[ 1.566452] scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
740<5>[ 1.568021] scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
741<5>[ 1.569614] scsi 0:0:0:4: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
742<5>[ 1.571200] scsi 0:0:0:5: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0800 PQ: 0 ANSI: 6
743<5>[ 1.572141] sd 0:0:0:0: [sda] 16384-byte physical blocks
744<5>[ 1.575038] sd 0:0:0:3: [sdd] 16384-byte physical blocks
745<5>[ 1.575078] sd 0:0:0:4: [sde] 16384-byte physical blocks
746<5>[ 1.575111] sd 0:0:0:5: [sdf] 16384-byte physical blocks
747<5>[ 1.575144] sd 0:0:0:2: [sdc] 16384-byte physical blocks
748<5>[ 1.575574] sd 0:0:0:1: [sdb] 16384-byte physical blocks
749<6>[ 1.576088] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15
750<6>[ 1.581958] sdd: sdd1 sdd2 sdd3
751<6>[ 1.582983] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34
752<6>[ 1.583304] sdb: sdb1
753<6>[ 1.583608] sdc: sdc1
754<6>[ 1.587254] sdf: sdf1 sdf2 sdf3 sdf4
755<3>[ 1.629596] msm_fd aa4000.qcom,fd: Face detection halt timeout
756<6>[ 1.636525] iommu: Adding device c00000.qcom,vidc:non_secure_cb to group 15
757<6>[ 1.645896] iommu: Adding device c00000.qcom,vidc:firmware_cb to group 16
758<6>[ 1.646279] iommu: Adding device c00000.qcom,vidc:secure_bitstream_cb to group 17
759<6>[ 1.651200] iommu: Adding device c00000.qcom,vidc:secure_pixel_cb to group 18
760<6>[ 1.654693] iommu: Adding device c00000.qcom,vidc:secure_non_pixel_cb to group 19
761<3>[ 1.662112] msm_vidc_vmem: Failed to read clock config
762<3>[ 1.662126] msm_vidc_vmem: Failed to read resources
763<4>[ 1.662148] msm_vidc_vmem: probe of 880000.qcom,vmem failed with error -22
764<6>[ 1.663647] iommu: Adding device 900000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 20
765<6>[ 1.664176] iommu: Adding device 900000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 21
766<3>[ 1.664509] sde_rotator_search_dt_clk: <SDEROT_ERR> unable to get clk: mnoc_clk
767<3>[ 1.664512] sde_rotator_register_clk: <SDEROT_ERR> unable to parse clocks
768<3>[ 1.664581] sde_rotator_core_init: <SDEROT_ERR> res_init failed -22
769<3>[ 1.664594] sde_rotator 900000.qcom,mdss_rotator: <SDEROT_ERR> fail init core -22
770<4>[ 1.664689] sde_rotator: probe of 900000.qcom,mdss_rotator failed with error -22
771<3>[ 1.667135] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
772<3>[ 1.667172] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
773<3>[ 1.669089] unable to find DT imem DLOAD mode node
774<3>[ 1.670537] unable to find DT imem EDLOAD mode node
775<6>[ 1.670562] get_param_by_index_and_offset[77] sid_index = 0 offset = 76 buf = ffffff8009564458 length = 28
776<6>[ 1.679965] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
777<3>[ 1.695195] of_batterydata_get_best_profile: No battery data found
778<3>[ 1.695208] FG: fg_batt_profile_init: couldn't find profile handle 0
779<6>[ 1.721645] device-mapper: uevent: version 1.0.3
780<6>[ 1.721803] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
781<6>[ 1.721906] device-mapper: req-crypt: dm-req-crypt successfully initalized.
782<6>[ 1.721906]
783<4>[ 1.723489] bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
784<4>[ 1.723605] bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
785<6>[ 1.723610] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
786<6>[ 1.723614] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
787<3>[ 1.723618] bt_dt_parse_clk_info: clocks is not provided in device tree
788<3>[ 1.723621] bt_power_populate_dt_pinfo: clock not provided in device tree
789<6>[ 1.724225] sdhci: Secure Digital Host Controller Interface driver
790<6>[ 1.724229] sdhci: Copyright(c) Pierre Ossman
791<6>[ 1.724233] sdhci-pltfm: SDHCI platform and OF driver helper
792<3>[ 1.726140] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Cannot get PWM device rc:(-517)
793<3>[ 1.726150] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Unable to read rgb config data
794<6>[ 1.728202] usbcore: registered new interface driver usbhid
795<6>[ 1.728209] usbhid: USB HID core driver
796<6>[ 1.728290] ashmem: initialized
797<6>[ 1.729129] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
798<1>[ 1.731148] [mhi_init] Failed to create IPC logging context
799<6>[ 1.736767] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
800<6>[ 1.739458] m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
801<3>[ 1.741825] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
802<3>[ 1.741932] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
803<3>[ 1.742033] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
804<3>[ 1.742135] devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
805<3>[ 1.743167] devfreq soc:qcom,m4m: Couldn't update frequency transition information.
806<6>[ 1.745047] usbcore: registered new interface driver snd-usb-audio
807<3>[ 1.748091] tfa98xx_i2c_probe
808<6>[ 1.758320] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
809<6>[ 1.758615] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
810<6>[ 1.758624] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
811<6>[ 1.758796] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
812<6>[ 1.758803] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
813<6>[ 1.758960] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
814<6>[ 1.758967] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
815<6>[ 1.759131] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
816<6>[ 1.759137] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
817<6>[ 1.759156] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
818<6>[ 1.759311] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
819<6>[ 1.759317] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
820<6>[ 1.759476] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
821<3>[ 1.759482] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Data Align from DT file qcom,msm-cpudai-tdm-data-align
822<4>[ 1.759488] msm-dai-q6-tdm: probe of soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 failed with error -22
823<6>[ 1.759699] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
824<3>[ 1.759706] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Data Align from DT file qcom,msm-cpudai-tdm-data-align
825<4>[ 1.759711] msm-dai-q6-tdm: probe of soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 failed with error -22
826<6>[ 1.759868] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
827<6>[ 1.759874] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
828<6>[ 1.759893] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
829<6>[ 1.760051] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
830<6>[ 1.760058] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
831<6>[ 1.760218] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
832<6>[ 1.760225] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
833<6>[ 1.760386] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
834<6>[ 1.760392] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
835<6>[ 1.760548] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
836<6>[ 1.760554] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
837<6>[ 1.760573] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
838<6>[ 1.760728] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
839<6>[ 1.760734] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
840<6>[ 1.760896] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
841<6>[ 1.760903] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
842<6>[ 1.761065] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
843<6>[ 1.761073] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
844<6>[ 1.761231] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
845<6>[ 1.761238] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
846<6>[ 1.763626] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
847<3>[ 1.769587] touchkey,s1302: boot_time: after optimize call [synaptics_ts_probe] on cpu 0
848<3>[ 1.769594] touchkey,s1302: synaptics_ts_probe is called
849<3>[ 1.771501] synaptics,s3320: after on cpu [0]
850<3>[ 1.771508] synaptics,s3320: synaptics_ts_probe is called
851<3>[ 1.771639] synaptics,s3320: synaptics_parse_dts ts->support_hw_poweroff =1
852<3>[ 1.771644] synaptics,s3320: ts->enable2v8_gpio not specified
853<3>[ 1.771648] synaptics,s3320: ts->max_num not specified
854<3>[ 1.771652] synaptics,s3320: button-map not specified
855<3>[ 1.771656] synaptics,s3320: synaptics:button map readed is 0 0 0
856<3>[ 1.771660] synaptics,s3320: synaptics,tx-rx-num is 16 28
857<4>[ 1.771666] synaptics,s3320: synaptic:ts->irq_gpio:125 irq_flags:8200 max_num 10
858<3>[ 1.772224] synaptics,s3320: synaptics:enable the v1p8_gpio
859<3>[ 1.773193] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
860<3>[ 1.773515] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
861<6>[ 1.774008] GACT probability NOT on
862<6>[ 1.774019] Mirror/redirect action on
863<6>[ 1.774031] u32 classifier
864<6>[ 1.774033] Actions configured
865<6>[ 1.774047] Netfilter messages via NETLINK v0.30.
866<6>[ 1.774077] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
867<6>[ 1.774292] ctnetlink v0.93: registering with nfnetlink.
868<6>[ 1.774609] xt_time: kernel timezone is -0000
869<6>[ 1.774756] ip_tables: (C) 2000-2006 Netfilter Core Team
870<6>[ 1.774838] arp_tables: (C) 2002 David S. Miller
871<6>[ 1.774867] Initializing XFRM netlink socket
872<6>[ 1.775072] NET: Registered protocol family 10
873<6>[ 1.775594] mip6: Mobile IPv6
874<6>[ 1.775608] ip6_tables: (C) 2000-2006 Netfilter Core Team
875<6>[ 1.775679] sit: IPv6 over IPv4 tunneling driver
876<6>[ 1.775910] NET: Registered protocol family 17
877<6>[ 1.775922] NET: Registered protocol family 15
878<6>[ 1.775948] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
879<5>[ 1.775962] Bridge firewalling registered
880<6>[ 1.775966] Ebtables v2.0 registered
881<6>[ 1.776097] Bluetooth: ffffffc17661fd00
882<6>[ 1.776103] Bluetooth: ffffffc17661fce0Bluetooth: ffffffc17661fd20
883<6>[ 1.776123] Bluetooth: ffffffc17661fcf0Bluetooth: ffffffc17661fcf0
884<6>[ 1.776129] Bluetooth: ffffffc17661fcd0Bluetooth: ffffffc17661fd40
885<6>[ 1.776136] Bluetooth: ffffffc17661fd20<6>[ 1.776154] l2tp_core: L2TP core driver, V2.0
886<6>[ 1.776162] l2tp_ppp: PPPoL2TP kernel driver, V2.0
887<6>[ 1.776166] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
888<6>[ 1.776179] l2tp_netlink: L2TP netlink interface
889<6>[ 1.776197] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
890<6>[ 1.776201] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
891<6>[ 1.777053] NET: Registered protocol family 27
892<3>[ 1.777104] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [local_IPCRTR]
893<6>[ 1.781692] subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
894<6>[ 1.782717] subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
895<6>[ 1.784003] pil-q6v5-mss 2080000.qcom,mss: No pas_id found.
896<6>[ 1.785270] pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
897<3>[ 1.787345] synaptics,s3320: synaptics:enable the reset_gpio
898<3>[ 1.788518] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006b04000
899<3>[ 1.788525] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006b04000
900<3>[ 1.788535] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006b04000
901<6>[ 1.788542] sps:BAM 0x0000000006b04000 is registered.<3>[ 1.789708] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
902<3>[ 1.789896] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
903<6>[ 1.790605] pmi8994_boost_5v: supplied by pon_spare_reg
904<6>[ 1.790625] smbcharger_external_otg: supplied by pmi8994_boost_5v
905<6>[ 1.825140] qpnp-smbcharger 400f000.qcom,spmi:qcom,pmi8994@2:qcom,qpnp-smbcharger: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
906<3>[ 1.825443] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Cannot get PWM device rc:(-517)
907<3>[ 1.825450] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Unable to read rgb config data
908<3>[ 1.827412] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
909<3>[ 1.827833] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
910<3>[ 1.828235] tusb320 7-0060: tusb320_probe
911<3>[ 1.828626] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x19 (ok)
912<3>[ 1.828770] i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x60 MSTR_STS:0x0d1300c8 OPER:0x00000010
913<4>[ 1.829128] tusb320_read_reg:reg(0x0), ret(-107)
914<3>[ 1.829133] tusb320 7-0060: DEV_ID(0x0)!= 0x30
915<4>[ 1.829146] tusb320: probe of 7-0060 failed with error -22
916<3>[ 1.829203] fusb301 7-0021: fusb301_probe
917<3>[ 1.829480] fusb301 7-0021: fusb301_gpio_configure OK!
918<3>[ 1.831221] fusb301 7-0021: fusb301_probe OK!
919<3>[ 1.831276] ptn5150 7-001d: ptn5150_probe
920<3>[ 1.831337] i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
921<3>[ 1.831366] ptn5150_read_reg: i2c read error: -5
922<3>[ 1.831370] ptn5150 7-001d: DEV_ID(0x00)!= 0x0b || 0x09
923<4>[ 1.831378] ptn5150: probe of 7-001d failed with error -22
924<3>[ 1.831574] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
925<3>[ 1.831726] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
926<3>[ 1.831889] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Cannot get PWM device rc:(-517)
927<3>[ 1.831893] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Unable to read rgb config data
928<3>[ 1.833282] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
929<3>[ 1.833610] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
930<5>[ 1.834682] Key type encrypted registered
931<6>[ 1.836080] msm_smem 86000000.qcom,smem: for smem segments only will be dumped.
932<6>[ 1.836660] project_info_init_sysfs success
933<6>[ 1.837100] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
934<6>[ 1.837314] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 22
935<6>[ 1.838831] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 23
936<6>[ 1.839625] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 24
937<6>[ 1.840398] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 25
938<6>[ 1.841129] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 26
939<6>[ 1.841856] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 27
940<6>[ 1.842582] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 28
941<6>[ 1.843310] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 29
942<3>[ 1.844823] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
943<3>[ 1.845059] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
944<3>[ 1.845327] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Cannot get PWM device rc:(-517)
945<3>[ 1.845334] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Unable to read rgb config data
946<3>[ 1.847322] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
947<3>[ 1.847743] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
948<3>[ 1.848366] ngd_msm_ctrl 91c0000.slim: error creating ipc_logging context
949<3>[ 1.848908] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
950<3>[ 1.849193] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
951<3>[ 1.849531] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Cannot get PWM device rc:(-517)
952<3>[ 1.849538] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Unable to read rgb config data
953<6>[ 1.850288] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input3
954<6>[ 1.851083] qcom,qpnp-rtc 400f000.qcom,spmi:qcom,pm8994@0:qcom,pm8994_rtc: setting system clock to 1970-02-13 13:11:26 UTC (3762686)
955<3>[ 1.851711] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
956<3>[ 1.852144] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
957<3>[ 1.852828] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
958<3>[ 1.853083] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
959<3>[ 1.853429] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Cannot get PWM device rc:(-517)
960<3>[ 1.853435] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Unable to read rgb config data
961<3>[ 1.855967] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
962<3>[ 1.856405] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
963<6>[ 1.856540] lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
964<6>[ 1.856789] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
965<6>[ 1.856925] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
966<3>[ 1.856953] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
967<6>[ 1.857074] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
968<6>[ 1.857205] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
969<3>[ 1.857212] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
970<6>[ 1.857343] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
971<6>[ 1.857472] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
972<3>[ 1.857543] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Cannot get PWM device rc:(-517)
973<3>[ 1.857550] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Unable to read rgb config data
974<6>[ 1.857605] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
975<3>[ 1.860421] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
976<3>[ 1.860723] parse_cpu_levels: idx 1 545
977<3>[ 1.860727] parse_cpu_levels: idx 2 1785
978<3>[ 1.860729] parse_cpu_levels: idx 2 3025
979<3>[ 1.860769] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
980<3>[ 1.860769] parse_cpu_levels: idx 1 545
981<3>[ 1.860771] parse_cpu_levels: idx 2 1785
982<3>[ 1.860773] parse_cpu_levels: idx 2 3025
983<3>[ 1.861180] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
984<3>[ 1.861312] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
985<3>[ 1.861503] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Cannot get PWM device rc:(-517)
986<3>[ 1.861506] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Unable to read rgb config data
987<3>[ 1.863120] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
988<3>[ 1.863475] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
989<3>[ 1.863844] qcom,qpnp-flash-led 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d300: Unable to acquire pinctrl
990<3>[ 1.863888] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
991<3>[ 1.864015] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
992<3>[ 1.864705] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Cannot get PWM device rc:(-517)
993<3>[ 1.864711] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Unable to read rgb config data
994<3>[ 1.866338] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
995<6>[ 1.866615] rmnet_ipa started initialization
996<6>[ 1.866620] IPA SSR support = True
997<6>[ 1.866623] IPA ipa-loaduC = True
998<6>[ 1.866625] IPA SG support = True
999<6>[ 1.866628] IPA Napi Enable = False
1000<6>[ 1.866631] using default for wan-rx-desc-size = 1024
1001<3>[ 1.866682] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1002<3>[ 1.867090] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
1003<3>[ 1.867241] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
1004<3>[ 1.868158] ipa ipa_sps_irq_control_all:959 EP (5) not allocated.
1005<3>[ 1.868163] ipa ipa2_uc_state_check:301 uC is not loaded
1006<6>[ 1.868841] rmnet_ipa completed initialization
1007<3>[ 1.869229] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Cannot get PWM device rc:(-517)
1008<3>[ 1.869235] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Unable to read rgb config data
1009<3>[ 1.871396] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1010<3>[ 1.871794] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1011<6>[ 1.872272] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
1012<3>[ 1.872356] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
1013<3>[ 1.872689] sde_smmu_probe: <SDEROT_ERR> probe failed as mdata is not initialized
1014<6>[ 1.873077] apc0_pwrcl_mem_acc_corner: disabling
1015<3>[ 1.873081] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Cannot get PWM device rc:(-517)
1016<3>[ 1.873086] qcom,leds-qpnp 400f000.qcom,spmi:qcom,pmi8994@3:qcom,leds@d000: Unable to read rgb config data
1017<6>[ 1.873090] apc1_perfcl_mem_acc_corner: disabling
1018<6>[ 1.873093] apcc_l3_mem_acc_corner: disabling
1019<6>[ 1.873096] gfx_mem_acc_corner: disabling
1020<6>[ 1.873099] kryo0-retention: disabling
1021<6>[ 1.873103] kryo1-retention: disabling
1022<6>[ 1.873157] gdsc_mmagic_bimc: disabling
1023<6>[ 1.873160] rome_vreg: disabling
1024<6>[ 1.873243] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
1025<6>[ 1.873486] clock_late_init: Removing enables held for handed-off clocks
1026<3>[ 1.875118] msm8996_populate_dai_link_component_of_node codec_name=tfa98xx.3-0036
1027<3>[ 1.875530] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
1028<6>[ 1.877143] ALSA device list:
1029<6>[ 1.877147] No soundcards found.
1030<3>[ 1.877207] Warning: unable to open an initial console.
1031<6>[ 1.877290] Freeing unused kernel memory: 704K (ffffff8009120000 - ffffff80091d0000)
1032<4>[ 1.877318] This architecture does not have kernel memory protection.
1033<13>[ 1.878419] init: init started!
1034<3>[ 1.878764] SELinux: security_load_policy, ss_initialized: 0
1035<7>[ 1.880286] SELinux: 2048 avtab hash slots, 5103 rules.
1036<6>[ 1.880455] SELinux: Android master kernel running Android M policy in compatibility mode.
1037<7>[ 1.881514] SELinux: 2048 avtab hash slots, 5103 rules.
1038<7>[ 1.881524] SELinux: 1 users, 2 roles, 546 types, 0 bools, 1 sens, 1024 cats
1039<7>[ 1.881529] SELinux: 87 classes, 5103 rules
1040<6>[ 1.881827] SELinux: Permission module_load in class system not defined in policy.
1041<6>[ 1.881953] SELinux: Class netlink_iscsi_socket not defined in policy.
1042<6>[ 1.881960] SELinux: Class netlink_fib_lookup_socket not defined in policy.
1043<6>[ 1.881963] SELinux: Class netlink_connector_socket not defined in policy.
1044<6>[ 1.881966] SELinux: Class netlink_netfilter_socket not defined in policy.
1045<6>[ 1.881977] SELinux: Class netlink_generic_socket not defined in policy.
1046<6>[ 1.881979] SELinux: Class netlink_scsitransport_socket not defined in policy.
1047<6>[ 1.881981] SELinux: Class netlink_rdma_socket not defined in policy.
1048<6>[ 1.881984] SELinux: Class netlink_crypto_socket not defined in policy.
1049<6>[ 1.882004] SELinux: Permission audit_read in class capability2 not defined in policy.
1050<6>[ 1.882014] SELinux: the above unknown classes and permissions will be denied
1051<7>[ 1.882027] SELinux: Completing initialization.
1052<7>[ 1.882029] SELinux: Setting up existing superblocks.
1053<3>[ 1.889979] i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1a (ok)
1054<3>[ 1.890638] synaptics,s3320: F12_2D_QUERY_BASE = 50
1055<3>[ 1.890638] F12_2D_CMD_BASE = 0
1056<3>[ 1.890638] F12_2D_CTRL_BASE = 15
1057<3>[ 1.890638] F12_2D_DATA_BASE = 8
1058<3>[ 1.890638]
1059<3>[ 1.890878] synaptics,s3320: F01_RMI_QUERY_BASE = 33
1060<3>[ 1.890878] F01_RMI_CMD_BASE = 2a
1061<3>[ 1.890878] F01_RMI_CTRL_BASE = e
1062<3>[ 1.890878] F01_RMI_DATA_BASE = 6
1063<3>[ 1.890878] synaptics,s3320: F34_FLASH_QUERY_BASE = 2b
1064<3>[ 1.891123] F34_FLASH_CMD_BASE = 0
1065<3>[ 1.891123] F34_FLASH_CTRL_BASE = d
1066<3>[ 1.891123] F34_FLASH_DATA_BASE = 0
1067<3>[ 1.891123]
1068<3>[ 1.891471] synaptics,s3320: F51_CUSTOM_QUERY_BASE = 55
1069<3>[ 1.891471] F51_CUSTOM_CMD_BASE = 0
1070<3>[ 1.891471] F51_CUSTOM_CTRL_BASE = 19
1071<3>[ 1.891471] F51_CUSTOM_DATA_BASE = 0
1072<3>[ 1.891471] synaptics,s3320: F54_QUERY_BASE = 4d
1073<3>[ 1.891826] F54_CMD_BASE = 4c
1074<3>[ 1.891826] F54_CTRL_BASE = e
1075<3>[ 1.891826] F54_DATA_BASE = 0
1076<3>[ 1.891826]
1077<3>[ 1.892096] synaptics,s3320: before fw update bootloader_mode[0x0]
1078<3>[ 1.892330] synaptics,s3320: CURRENT_FIRMWARE_ID = 0x15801123
1079<3>[ 1.893173] synaptics,s3320: synatpitcs_fw: fw_name = tp/fw_synaptics_15801b.img
1080<3>[ 1.896408] synaptics,s3320: synaptics_init_panel is called!
1081<3>[ 1.896711] synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1082<3>[ 1.898400] synaptics,s3320: max_x = 1080,max_y = 1920; max_x_ic = 1079,max_y_ic = 1919
1083<3>[ 1.898560] synaptics,s3320: afte fw update,program memory self-check bootloader_mode = 0x0
1084<3>[ 1.899058] synaptics,s3320: synaptics_soft_reset !!!
1085<3>[ 1.904195] SELinux: security_load_policy, sidtab.shutdown: 0
1086<5>[ 1.907354] audit: type=1403 audit(3762686.539:2): policy loaded auid=4294967295 ses=4294967295
1087<5>[ 1.907634] audit: type=1404 audit(3762686.539:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
1088<13>[ 1.907821] init: (Initializing SELinux enforcing took 0.03s.)
1089<13>[ 1.910921] init: init second stage started!
1090<11>[ 1.947839] init: waitpid failed: No child processes
1091<13>[ 1.948090] init: (Loading properties from /default.prop took 0.00s.)
1092<11>[ 1.948377] init: /init.rc: 11: invalid command 'setcon'
1093<11>[ 1.948410] init: /init.rc: 57: invalid command 'load_all_props'
1094<11>[ 1.948472] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
1095<13>[ 1.948545] init: (Parsing /init.recovery.usb.rc took 0.00s.)
1096<13>[ 1.948584] init: (Parsing /init.recovery.qcom.rc took 0.00s.)
1097<13>[ 1.948594] init: (Parsing /init.rc took 0.00s.)
1098<5>[ 1.948668] audit: type=1400 audit(3762686.579:4): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=0
1099<13>[ 1.948680] init: write_file: Unable to write to '/sys/fs/selinux/checkreqprot': Permission denied
1100<13>[ 1.948713] init: Starting service 'ueventd'...
1101<13>[ 1.948866] init: Starting service 'healthd'...
1102<13>[ 1.948980] init: Waiting for /dev/.coldboot_done...
1103<13>[ 1.950576] ueventd: ueventd started!
1104<3>[ 1.999588] synaptics,s3320: synaptics_input_init is called
1105<6>[ 1.999735] input: synaptics as /devices/soc/75ba000.i2c/i2c-12/12-0020/input/input4
1106<3>[ 2.059587] synaptics,s3320: synaptic:ts->irq is 337
1107<3>[ 2.060199] synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
1108<3>[ 2.060205] synaptics,s3320: synaptics_init_panel is called!
1109<3>[ 2.060501] synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1110<3>[ 2.080194] synaptics,s3320: synaptics_ts_probe: going to create files--tp_fw_update
1111<4>[ 2.080338] synaptics,s3320: synaptics_ts_probe 3203: normal end
1112<13>[ 2.217717] ueventd: Coldboot took 0.26s.
1113<13>[ 2.221329] init: Waiting for /dev/.coldboot_done took 0.27s.
1114<13>[ 2.222739] init: write_file: Unable to open '/proc/touchpanel/double_tap_enable': No such file or directory
1115<13>[ 2.223751] init: write_file: Unable to open '/sys/class/android_usb/android0/enable': No such file or directory
1116<13>[ 2.223776] init: write_file: Unable to open '/sys/class/android_usb/android0/idVendor': No such file or directory
1117<13>[ 2.223798] init: write_file: Unable to open '/sys/class/android_usb/android0/idProduct': No such file or directory
1118<13>[ 2.223820] init: write_file: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
1119<13>[ 2.223841] init: write_file: Unable to open '/sys/class/android_usb/android0/functions': No such file or directory
1120<13>[ 2.223865] init: write_file: Unable to open '/sys/class/android_usb/android0/iManufacturer': No such file or directory
1121<11>[ 2.223878] init: property 'ro.product.model' doesn't exist while expanding '${ro.product.model}'
1122<11>[ 2.223889] init: cannot expand '${ro.product.model}' while writing to '/sys/class/android_usb/android0/iProduct'
1123<13>[ 2.223909] init: write_file: Unable to open '/sys/class/android_usb/android0/iSerial': No such file or directory
1124<13>[ 2.223953] init: (Loading properties from /system/build.prop took 0.00s.)
1125<13>[ 2.223976] init: (Loading properties from /vendor/build.prop took 0.00s.)
1126<13>[ 2.223997] init: (Loading properties from /factory/factory.prop took 0.00s.)
1127<11>[ 2.224038] fs_mgr: Cannot open file /fstab.qcom
1128<11>[ 2.224048] init: unable to read fstab /fstab.qcom: No such file or directory
1129<13>[ 2.224077] init: (Loading properties from /data/local.prop took 0.00s.)
1130<11>[ 2.224098] init: Unable to open persistent property directory "/data/property": No such file or directory
1131<13>[ 2.224576] init: Starting service 'set_permissive'...
1132<11>[ 2.225622] init: Warning! Service recovery needs a SELinux domain defined; please fix!
1133<13>[ 2.225634] init: Starting service 'recovery'...
1134<13>[ 2.225874] init: write_file: Unable to open '/sys/class/android_usb/android0/enable': No such file or directory
1135<13>[ 2.225907] init: Starting service 'adbd'...
1136<13>[ 2.226063] init: write_file: Unable to open '/sys/class/android_usb/android0/enable': No such file or directory
1137<5>[ 2.227953] audit: type=1400 audit(3762686.859:5): avc: denied { execute_no_trans } for pid=463 comm="init" path="/sbin/recovery" dev="rootfs" ino=14444 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=0
1138<11>[ 2.228043] init: cannot execve('/sbin/recovery'): Permission denied
1139<13>[ 2.228372] init: Service 'recovery' (pid 463) exited with status 127
1140<13>[ 2.228389] init: Service 'recovery' (pid 463) killing any children in process group
1141<5>[ 2.229148] audit: type=1400 audit(3762686.859:6): avc: denied { dac_override } for pid=464 comm="adbd" capability=1 scontext=u:r:adbd:s0 tcontext=u:r:adbd:s0 tclass=capability permissive=0
1142<5>[ 2.229179] audit: type=1400 audit(3762686.859:7): avc: denied { dac_read_search } for pid=464 comm="adbd" capability=2 scontext=u:r:adbd:s0 tcontext=u:r:adbd:s0 tclass=capability permissive=0
1143<5>[ 2.240285] audit: type=1400 audit(3762686.879:8): avc: denied { write } for pid=466 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
1144<5>[ 2.240333] audit: type=1400 audit(3762686.879:9): avc: denied { setenforce } for pid=466 comm="setenforce" scontext=u:r:recovery:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
1145<5>[ 2.240342] audit: type=1404 audit(3762686.879:10): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295
1146<13>[ 2.241338] init: Service 'set_permissive' (pid 462) exited with status 0
1147<3>[ 2.319985] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1b (ok)
1148<3>[ 2.320634] touchkey,s1302: product id is s1302
1149<3>[ 2.320992] touchkey,s1302: F11_2D_QUERY_BASE = 95
1150<3>[ 2.320992] F11_2D_CMD_BASE = 6e
1151<3>[ 2.320992] F11_2D_CTRL_BASE = 3d
1152<3>[ 2.320992] F11_2D_DATA_BASE = 15
1153<3>[ 2.320992]
1154<3>[ 2.322384] touchkey,s1302: CURRENT_FIRMWARE_ID = 0x4
1155<3>[ 2.322544] touchkey,s1302: before fw update,bootloader_mode = 0x0
1156<6>[ 2.322700] input: synaptics as /devices/soc/75b6000.i2c/i2c-8/8-0020/input/input5
1157<3>[ 2.379585] touchkey,s1302: synaptic:ts->irq is 344
1158<3>[ 2.380023] touchkey,s1302: synaptics_soft_reset !!!
1159<3>[ 2.380048] touchkey,s1302: create nodes is successe!
1160<4>[ 2.380156] touchkey,s1302: synaptics_ts_probe s1302: normal end
1161<3>[ 2.380160] touchkey,s1302: boot_time: synaptics_ts_probe return 0
1162<3>[ 2.578791] sps: BAM device 0x0000000007584000 is not registered yet.
1163<3>[ 2.578824] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000007584000
1164<3>[ 2.578828] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000007584000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000007584000
1165<3>[ 2.578836] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000007584000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000007584000
1166<6>[ 2.578843] sps:BAM 0x0000000007584000 is registered.<6>[ 2.578988] sps:BAM 0x0000000007584000 (va:0xffffff800bb40000) enabled: ver:0x19, number of pipes:24
1167<3>[ 2.678108] synaptics,s3320: start get base data:1
1168<3>[ 2.678115] synaptics,s3320: tp_baseline_get start!
1169<3>[ 2.729807] synaptics,s3320: tp_baseline_get end!
1170<3>[ 2.730177] synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
1171<3>[ 2.730182] synaptics,s3320: synaptics_init_panel is called!
1172<3>[ 2.730464] synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1173<3>[ 4.200060] Error: Driver 'IPCRTR' is already registered, aborting...
1174<3>[ 4.200066] IPC_RTR: msm_ipc_router_smd_driver_register: Failed to register platform driver [IPCRTR]
1175<3>[ 4.200069] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
1176<3>[ 4.200073] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
1177<3>[ 6.489674] switch_dev_work ,tristatekey set to state(1)
1178<11>[ 7.246606] init: Warning! Service recovery needs a SELinux domain defined; please fix!
1179<13>[ 7.246618] init: Starting service 'recovery'...
1180<5>[ 7.247006] audit: type=1400 audit(3762691.889:11): avc: denied { execute_no_trans } for pid=474 comm="init" path="/sbin/recovery" dev="rootfs" ino=14444 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1181<5>[ 7.266002] audit: type=1400 audit(3762691.899:12): avc: denied { append } for pid=474 comm="recovery" path="/tmp/recovery.log" dev="tmpfs" ino=15679 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file permissive=1
1182<5>[ 7.266093] audit: type=1400 audit(3762691.899:13): avc: denied { write } for pid=474 comm="recovery" name="property_service" dev="tmpfs" ino=15675 scontext=u:r:init:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=1
1183<5>[ 7.267347] audit: type=1400 audit(3762691.899:14): avc: denied { write } for pid=474 comm="recovery" name="fb0" dev="tmpfs" ino=16728 scontext=u:r:init:s0 tcontext=u:object_r:graphics_device:s0 tclass=chr_file permissive=1
1184<5>[ 7.267486] audit: type=1400 audit(3762691.899:15): avc: denied { ioctl } for pid=474 comm="recovery" path="/dev/graphics/fb0" dev="tmpfs" ino=16728 ioctlcmd=4602 scontext=u:r:init:s0 tcontext=u:object_r:graphics_device:s0 tclass=chr_file permissive=1
1185<3>[ 7.275554] fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen off
1186<3>[ 7.275579] synaptics,s3320: fb_notifier_callback blank[4],event[0x10]
1187<3>[ 7.275581] synaptics,s3320: fb_notifier_callback : going TP suspend start
1188<3>[ 7.275585] synaptics,s3320: synaptics_ts_suspend enter
1189<3>[ 7.275591] synaptics,s3320: synaptics_ts_suspend normal end
1190<3>[ 7.275592] synaptics,s3320: fb_notifier_callback : going TP suspend end
1191<3>[ 7.275649] synaptics,s3320: fb_notifier_callback blank[4],event[0x9]
1192<3>[ 7.276286] fpc1020 soc:fpc_fpc1020: fb_notifier_callback screen on
1193<3>[ 7.276298] synaptics,s3320: fb_notifier_callback blank[0],event[0x10]
1194<3>[ 7.276299] synaptics,s3320: fb_notifier_callback going TP resume start
1195<3>[ 7.276302] synaptics,s3320: synaptics_ts_resume enter!
1196<3>[ 7.276315] synaptics,s3320: synaptics_ts_resume:normal end!
1197<3>[ 7.276316] synaptics,s3320: fb_notifier_callback going TP resume end
1198<3>[ 7.276391] synaptics,s3320: fb_notifier_callback blank[0],event[0x9]
1199<3>[ 7.279627] synaptics,s3320: tp_baseline_get start!
1200<5>[ 7.323090] audit: type=1400 audit(3762691.959:16): avc: denied { execmem } for pid=474 comm="recovery" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
1201<5>[ 7.323111] audit: type=1400 audit(3762691.959:17): avc: denied { execute } for pid=474 comm="recovery" path="/dev/ashmem" dev="tmpfs" ino=16665 scontext=u:r:init:s0 tcontext=u:object_r:ashmem_device:s0 tclass=chr_file permissive=1
1202<3>[ 7.339647] synaptics,s3320: tp_baseline_get end!
1203<3>[ 7.340739] synaptics,s3320: enter reset tp status,and ts->in_gesture_mode is:0
1204<3>[ 7.340747] synaptics,s3320: synaptics_init_panel is called!
1205<3>[ 7.341671] synaptics,s3320: synaptics_mode_change: set TP to mode[0x80]
1206<5>[ 7.348768] audit: type=1400 audit(3762691.979:18): avc: denied { ioctl } for pid=474 comm="recovery" path="/dev/input/event5" dev="tmpfs" ino=16744 ioctlcmd=4506 scontext=u:r:init:s0 tcontext=u:object_r:input_device:s0 tclass=chr_file permissive=1
1207<5>[ 7.360111] audit: type=1400 audit(3762691.999:19): avc: denied { mounton } for pid=474 comm="recovery" path="/cache" dev="rootfs" ino=5832 scontext=u:r:init:s0 tcontext=u:object_r:cache_file:s0 tclass=dir permissive=1
1208<5>[ 7.372665] audit: type=1400 audit(3762692.009:20): avc: denied { write } for pid=474 comm="recovery" name="sda15" dev="tmpfs" ino=16399 scontext=u:r:init:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
1209<3>[ 7.411836] FAT-fs (sda1): invalid media value (0xe7)
1210<6>[ 7.411844] FAT-fs (sda1): Can't find a valid FAT filesystem
1211<3>[ 7.412086] FAT-fs (sda1): invalid media value (0xe7)
1212<6>[ 7.412091] FAT-fs (sda1): Can't find a valid FAT filesystem
1213<4>[ 10.099590] synap rmidev_create_attr
1214<4>[ 10.399576] synap rmidev_create_attr
1215<3>[ 11.100786] FAT-fs (sda1): invalid media value (0xe7)
1216<6>[ 11.100794] FAT-fs (sda1): Can't find a valid FAT filesystem
1217<3>[ 11.101047] FAT-fs (sda1): invalid media value (0xe7)
1218<6>[ 11.101052] FAT-fs (sda1): Can't find a valid FAT filesystem
1219<3>[ 11.119144] FAT-fs (sda1): invalid media value (0xe7)
1220<6>[ 11.119153] FAT-fs (sda1): Can't find a valid FAT filesystem
1221<3>[ 11.119387] FAT-fs (sda1): invalid media value (0xe7)
1222<6>[ 11.119393] FAT-fs (sda1): Can't find a valid FAT filesystem
1223<3>[ 16.755904] fusb301 7-0021: fusb301_irq_thread: type<0> int(0x04)
1224<3>[ 16.755912] fusb301 7-0021: fusb301_irq_thread: BC_LVL interrupt!
1225<3>[ 16.770053] fusb301 7-0021: fusb301_irq_thread: type<0> int(0x02)
1226<3>[ 16.770061] fusb301 7-0021: fusb301_irq_thread: Detach interrupt!
1227<3>[ 18.741566] fusb301 7-0021: fusb301_irq_thread: type<0> int(0x05)
1228<3>[ 18.742556] fusb301 7-0021: fusb301_irq_thread: Attach interrupt! TYPE is 5, Orient is 1
1229<3>[ 18.743045] fusb301 7-0021: fusb301_irq_thread: BC_LVL 1, 1:500ma 2:1.5A 3:3A!
1230<5>[ 20.794670] random: nonblocking pool is initialized
1231<4>[ 21.516896] audit_printk_skb: 15 callbacks suppressed
1232<5>[ 21.516902] audit: type=1400 audit(3762705.399:26): avc: denied { unlink } for pid=474 comm="recovery" name="orsin" dev="rootfs" ino=6791 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
1233<3>[ 22.341775] synaptics,s3320: all finger up
1234<5>[ 24.376468] audit: type=1400 audit(3762708.259:27): avc: denied { ioctl } for pid=485 comm="recovery" path="/dev/pts/0" dev="devpts" ino=3 ioctlcmd=540e scontext=u:r:init:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
1235<5>[ 24.383240] audit: type=1400 audit(3762708.269:28): avc: denied { getattr } for pid=485 comm="sh" path="/dev/pts/0" dev="devpts" ino=3 scontext=u:r:init:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
1236<3>[ 25.822269] synaptics,s3320: all finger up
1237<3>[ 27.133994] synaptics,s3320: all finger up
1238<3>[ 28.505467] synaptics,s3320: all finger up
1239<3>[ 47.940477] synaptics,s3320: all finger up
1240<3>[ 61.261051] synaptics,s3320: all finger up
1241<3>[ 73.556813] synaptics,s3320: all finger up
1242<3>[ 74.485855] synaptics,s3320: all finger up
1243<3>[ 76.777673] synaptics,s3320: all finger up
1244<3>[ 110.623280] synaptics,s3320: all finger up
1245<3>[ 111.690247] synaptics,s3320: all finger up
1246<3>[ 112.764535] synaptics,s3320: all finger up
1247<3>[ 116.562662] synaptics,s3320: all finger up
1248<6>[ 118.239886] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:62
1249<6>[ 118.239894] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:62
1250<6>[ 118.239899] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:62
1251<6>[ 118.239902] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:62
1252<3>[ 118.457708] synaptics,s3320: all finger up
1253<6>[ 118.539957] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:49
1254<6>[ 118.539965] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:49
1255<6>[ 118.539971] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:49
1256<6>[ 118.539976] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:49
1257<6>[ 118.639900] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:60
1258<6>[ 118.639907] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:60
1259<6>[ 118.639911] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:60
1260<6>[ 118.639915] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:60
1261<6>[ 118.739939] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:41
1262<6>[ 118.739947] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:41
1263<6>[ 118.739952] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:41
1264<6>[ 118.739957] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:41
1265<3>[ 119.347126] synaptics,s3320: all finger up
1266<3>[ 120.600085] synaptics,s3320: all finger up
1267<6>[ 120.639892] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:62
1268<6>[ 120.639900] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:62
1269<6>[ 120.639904] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:62
1270<6>[ 120.639907] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:62
1271<6>[ 120.839939] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:48
1272<6>[ 120.839947] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:48
1273<6>[ 120.839952] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:48
1274<6>[ 120.839957] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:48
1275<6>[ 121.039901] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:61
1276<6>[ 121.039908] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:61
1277<6>[ 121.039912] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:61
1278<6>[ 121.039915] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:61
1279<6>[ 121.139948] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:49
1280<6>[ 121.139955] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:49
1281<6>[ 121.139960] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:49
1282<6>[ 121.139965] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:49
1283<6>[ 121.349901] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:62
1284<6>[ 121.349909] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:62
1285<6>[ 121.349913] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:62
1286<6>[ 121.349917] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:62
1287<6>[ 121.449973] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:44
1288<6>[ 121.449986] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:44
1289<6>[ 121.449992] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:44
1290<6>[ 121.449997] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:44
1291<6>[ 121.749895] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:61
1292<6>[ 121.749903] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:61
1293<6>[ 121.749908] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:61
1294<6>[ 121.749912] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:61
1295<6>[ 121.849989] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:43
1296<6>[ 121.849998] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:43
1297<6>[ 121.850003] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:43
1298<6>[ 121.850008] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:43
1299<3>[ 121.893320] synaptics,s3320: all finger up
1300<6>[ 122.649870] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:63
1301<6>[ 122.649878] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:63
1302<6>[ 122.649883] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:63
1303<6>[ 122.649887] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:63
1304<6>[ 122.749945] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:49
1305<6>[ 122.749954] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:49
1306<6>[ 122.749959] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:49
1307<6>[ 122.749964] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:49
1308<6>[ 122.849889] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:62
1309<6>[ 122.849896] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:62
1310<6>[ 122.849900] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:62
1311<6>[ 122.849904] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:62
1312<6>[ 122.949967] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:42
1313<6>[ 122.949975] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:42
1314<6>[ 122.949981] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:42
1315<6>[ 122.949985] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:42
1316<3>[ 123.491085] synaptics,s3320: all finger up
1317<3>[ 124.617097] synaptics,s3320: all finger up
1318<3>[ 125.910607] synaptics,s3320: all finger up
1319<3>[ 128.621128] synaptics,s3320: all finger up
1320<3>[ 133.158705] synaptics,s3320: all finger up
1321<6>[ 133.269883] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:61
1322<6>[ 133.269890] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:61
1323<6>[ 133.269894] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:61
1324<6>[ 133.269898] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:61
1325<6>[ 133.369954] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:47
1326<6>[ 133.369961] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:47
1327<6>[ 133.369966] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:47
1328<6>[ 133.369970] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:47
1329<6>[ 133.469880] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:61
1330<6>[ 133.469889] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:61
1331<6>[ 133.469893] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:61
1332<6>[ 133.469897] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:61
1333<6>[ 133.569951] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:49
1334<6>[ 133.569959] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:49
1335<6>[ 133.569964] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:49
1336<6>[ 133.569969] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:49
1337<6>[ 135.469904] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:61
1338<6>[ 135.469912] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:61
1339<6>[ 135.469917] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:61
1340<6>[ 135.469921] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:61
1341<3>[ 135.593652] synaptics,s3320: all finger up
1342<6>[ 135.869940] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:48
1343<6>[ 135.869949] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:48
1344<6>[ 135.869954] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:48
1345<6>[ 135.869959] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:48
1346<6>[ 136.169901] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:62
1347<6>[ 136.169908] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:62
1348<6>[ 136.169912] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:62
1349<6>[ 136.169916] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:62
1350<6>[ 136.369940] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:48
1351<6>[ 136.369948] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:48
1352<6>[ 136.369954] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:48
1353<6>[ 136.369958] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:48
1354<6>[ 137.669880] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:60
1355<6>[ 137.669888] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:60
1356<6>[ 137.669892] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:60
1357<6>[ 137.669896] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:60
1358<6>[ 137.769945] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:42
1359<6>[ 137.769953] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:42
1360<6>[ 137.769958] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:42
1361<6>[ 137.769963] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:42
1362<3>[ 138.148519] synaptics,s3320: all finger up
1363<3>[ 141.129057] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
1364<6>[ 141.131043] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
1365<6>[ 141.131072] SELinux: Context u:object_r:persist_file:s0 is not valid (left unmapped).
1366<3>[ 143.675031] synaptics,s3320: all finger up
1367<3>[ 145.653940] synaptics,s3320: all finger up
1368<6>[ 147.769903] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:62
1369<6>[ 147.769914] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:62
1370<6>[ 147.769918] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:62
1371<6>[ 147.769922] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:62
1372<6>[ 147.969972] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:49
1373<6>[ 147.969980] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:49
1374<6>[ 147.969984] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:49
1375<6>[ 147.969989] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:49
1376<6>[ 148.169893] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:62
1377<6>[ 148.169903] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:62
1378<6>[ 148.169907] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:62
1379<6>[ 148.169911] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:62
1380<3>[ 148.177209] synaptics,s3320: all finger up
1381<6>[ 148.269995] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:42
1382<6>[ 148.270004] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:42
1383<6>[ 148.270009] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:42
1384<6>[ 148.270013] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:42
1385<6>[ 150.144149] SELinux: Context u:object_r:sensors_persist_file:s0 is not valid (left unmapped).
1386<6>[ 150.144193] SELinux: Context u:object_r:persist_usf_file:s0 is not valid (left unmapped).
1387<6>[ 150.144234] SELinux: Context u:object_r:persist_drm_file:s0 is not valid (left unmapped).
1388<6>[ 150.144305] SELinux: Context u:object_r:rfs_file:s0 is not valid (left unmapped).
1389<6>[ 150.144341] SELinux: Context u:object_r:rfs_shared_hlos_file:s0 is not valid (left unmapped).
1390<6>[ 150.144391] SELinux: Context u:object_r:persist_bluetooth_file:s0 is not valid (left unmapped).
1391<6>[ 150.144454] SELinux: Context u:object_r:persist_bms_file:s0 is not valid (left unmapped).
1392<6>[ 150.144497] SELinux: Context u:object_r:persist_misc_file:s0 is not valid (left unmapped).
1393<6>[ 150.144529] SELinux: Context u:object_r:persist_alarm_file:s0 is not valid (left unmapped).
1394<3>[ 153.173309] synaptics,s3320: all finger up
1395<5>[ 154.359297] audit: type=1400 audit(3762838.239:29): avc: denied { syslog_read } for pid=493 comm="dmesg" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1