· 6 years ago · Sep 14, 2019, 04:50 PM
1[ 0.000000] microcode: microcode updated early to revision 0xa, date = 2018-05-08
2[ 0.000000] Linux version 5.0.0-27-generic (buildd@lgw01-amd64-031) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #28~18.04.1-Ubuntu SMP Thu Aug 22 03:00:32 UTC 2019 (Ubuntu 5.0.0-27.28~18.04.1-generic 5.0.21)
3[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-27-generic root=UUID=da590515-c8a7-4db3-b4df-690a6de87c09 ro quiet splash vt.handoff=1
4[ 0.000000] KERNEL supported cpus:
5[ 0.000000] Intel GenuineIntel
6[ 0.000000] AMD AuthenticAMD
7[ 0.000000] Hygon HygonGenuine
8[ 0.000000] Centaur CentaurHauls
9[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
10[ 0.000000] BIOS-provided physical RAM map:
11[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
12[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd77ffff] usable
15[ 0.000000] BIOS-e820: [mem 0x00000000bd780000-0x00000000bd78dfff] ACPI data
16[ 0.000000] BIOS-e820: [mem 0x00000000bd78e000-0x00000000bd7cffff] ACPI NVS
17[ 0.000000] BIOS-e820: [mem 0x00000000bd7d0000-0x00000000bd7dffff] reserved
18[ 0.000000] BIOS-e820: [mem 0x00000000bd7ed000-0x00000000bdffffff] reserved
19[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
20[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
21[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
22[ 0.000000] NX (Execute Disable) protection: active
23[ 0.000000] SMBIOS 2.6 present.
24[ 0.000000] DMI: MEDIONPC MS-7616/MS-7616, BIOS A7616IM7.20G 04/22/2010
25[ 0.000000] tsc: Fast TSC calibration using PIT
26[ 0.000000] tsc: Detected 2793.191 MHz processor
27[ 0.001881] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
28[ 0.001882] e820: remove [mem 0x000a0000-0x000fffff] usable
29[ 0.001888] last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
30[ 0.001892] MTRR default type: uncachable
31[ 0.001892] MTRR fixed ranges enabled:
32[ 0.001893] 00000-9FFFF write-back
33[ 0.001894] A0000-BFFFF uncachable
34[ 0.001895] C0000-CFFFF write-protect
35[ 0.001896] D0000-DFFFF uncachable
36[ 0.001896] E0000-E3FFF write-protect
37[ 0.001897] E4000-E7FFF write-through
38[ 0.001898] E8000-EBFFF write-protect
39[ 0.001898] EC000-EFFFF write-through
40[ 0.001899] F0000-FFFFF write-protect
41[ 0.001900] MTRR variable ranges enabled:
42[ 0.001901] 0 base 1C0000000 mask FC0000000 uncachable
43[ 0.001902] 1 base 000000000 mask E00000000 write-back
44[ 0.001903] 2 base 0C0000000 mask FC0000000 uncachable
45[ 0.001904] 3 base 0BE000000 mask FFE000000 uncachable
46[ 0.001904] 4 disabled
47[ 0.001905] 5 disabled
48[ 0.001906] 6 disabled
49[ 0.001906] 7 disabled
50[ 0.002675] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
51[ 0.002788] total RAM covered: 6112M
52[ 0.003442] Found optimal setting for mtrr clean up
53[ 0.003443] gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G
54[ 0.004136] e820: update [mem 0xbe000000-0xffffffff] usable ==> reserved
55[ 0.004140] last_pfn = 0xbd780 max_arch_pfn = 0x400000000
56[ 0.013626] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
57[ 0.020598] check: Scanning 1 areas for low memory corruption
58[ 0.020603] BRK [0x12f801000, 0x12f801fff] PGTABLE
59[ 0.020605] BRK [0x12f802000, 0x12f802fff] PGTABLE
60[ 0.020606] BRK [0x12f803000, 0x12f803fff] PGTABLE
61[ 0.020636] BRK [0x12f804000, 0x12f804fff] PGTABLE
62[ 0.020638] BRK [0x12f805000, 0x12f805fff] PGTABLE
63[ 0.020688] BRK [0x12f806000, 0x12f806fff] PGTABLE
64[ 0.020702] BRK [0x12f807000, 0x12f807fff] PGTABLE
65[ 0.020720] BRK [0x12f808000, 0x12f808fff] PGTABLE
66[ 0.020793] RAMDISK: [mem 0x3037f000-0x341b6fff]
67[ 0.020802] ACPI: Early table checksum verification disabled
68[ 0.020891] ACPI: RSDP 0x00000000000F9E90 000014 (v00 ACPIAM)
69[ 0.020894] ACPI: RSDT 0x00000000BD780000 000044 (v01 MEDION MEDIONAG 20100422 MSFT 00000097)
70[ 0.020900] ACPI: FACP 0x00000000BD780200 000084 (v01 042210 FACP0930 20100422 MSFT 00000097)
71[ 0.020905] ACPI: DSDT 0x00000000BD7805E0 005E9E (v01 A7616 A761620G 0000020F INTL 20051117)
72[ 0.020909] ACPI: FACS 0x00000000BD78E000 000040
73[ 0.020911] ACPI: APIC 0x00000000BD780390 00008C (v01 042210 APIC0930 20100422 MSFT 00000097)
74[ 0.020915] ACPI: MCFG 0x00000000BD780420 00003C (v01 042210 OEMMCFG 20100422 MSFT 00000097)
75[ 0.020918] ACPI: SLIC 0x00000000BD780460 000176 (v01 MEDION MEDIONAG 20100422 MSFT 00000097)
76[ 0.020921] ACPI: OEMB 0x00000000BD78E040 000082 (v01 042210 OEMB0930 20100422 MSFT 00000097)
77[ 0.020924] ACPI: HPET 0x00000000BD78A5E0 000038 (v01 042210 OEMHPET 20100422 MSFT 00000097)
78[ 0.020927] ACPI: GSCI 0x00000000BD78E0D0 002024 (v01 042210 GMCHSCI 20100422 MSFT 00000097)
79[ 0.020930] ACPI: SSDT 0x00000000BD791840 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
80[ 0.020938] ACPI: Local APIC address 0xfee00000
81[ 0.021043] No NUMA configuration found
82[ 0.021044] Faking a node at [mem 0x0000000000000000-0x00000001bfffffff]
83[ 0.021054] NODE_DATA(0) allocated [mem 0x1bffd3000-0x1bfffdfff]
84[ 0.021338] Zone ranges:
85[ 0.021339] DMA [mem 0x0000000000001000-0x0000000000ffffff]
86[ 0.021340] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
87[ 0.021341] Normal [mem 0x0000000100000000-0x00000001bfffffff]
88[ 0.021342] Device empty
89[ 0.021342] Movable zone start for each node
90[ 0.021345] Early memory node ranges
91[ 0.021346] node 0: [mem 0x0000000000001000-0x000000000009dfff]
92[ 0.021347] node 0: [mem 0x0000000000100000-0x00000000bd77ffff]
93[ 0.021348] node 0: [mem 0x0000000100000000-0x00000001bfffffff]
94[ 0.021534] Zeroed struct page in unavailable ranges: 10467 pages
95[ 0.021535] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bfffffff]
96[ 0.021536] On node 0 totalpages: 1562397
97[ 0.021537] DMA zone: 64 pages used for memmap
98[ 0.021538] DMA zone: 21 pages reserved
99[ 0.021538] DMA zone: 3997 pages, LIFO batch:0
100[ 0.021656] DMA32 zone: 12062 pages used for memmap
101[ 0.021656] DMA32 zone: 771968 pages, LIFO batch:63
102[ 0.045133] Normal zone: 12288 pages used for memmap
103[ 0.045135] Normal zone: 786432 pages, LIFO batch:63
104[ 0.067277] ACPI: PM-Timer IO Port: 0x808
105[ 0.067280] ACPI: Local APIC address 0xfee00000
106[ 0.067296] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
107[ 0.067299] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
108[ 0.067300] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
109[ 0.067301] ACPI: IRQ0 used by override.
110[ 0.067303] ACPI: IRQ9 used by override.
111[ 0.067305] Using ACPI (MADT) for SMP configuration information
112[ 0.067306] ACPI: HPET id: 0x8086a701 base: 0xfed00000
113[ 0.067311] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
114[ 0.067323] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
115[ 0.067324] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
116[ 0.067325] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
117[ 0.067326] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
118[ 0.067326] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
119[ 0.067327] PM: Registered nosave memory: [mem 0xbd780000-0xbd78dfff]
120[ 0.067328] PM: Registered nosave memory: [mem 0xbd78e000-0xbd7cffff]
121[ 0.067329] PM: Registered nosave memory: [mem 0xbd7d0000-0xbd7dffff]
122[ 0.067329] PM: Registered nosave memory: [mem 0xbd7e0000-0xbd7ecfff]
123[ 0.067330] PM: Registered nosave memory: [mem 0xbd7ed000-0xbdffffff]
124[ 0.067330] PM: Registered nosave memory: [mem 0xbe000000-0xfedfffff]
125[ 0.067331] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
126[ 0.067332] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
127[ 0.067332] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
128[ 0.067334] [mem 0xbe000000-0xfedfffff] available for PCI devices
129[ 0.067335] Booting paravirtualized kernel on bare hardware
130[ 0.067338] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
131[ 0.067348] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
132[ 0.067353] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
133[ 0.067692] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u262144
134[ 0.067697] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
135[ 0.067698] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
136[ 0.067721] Built 1 zonelists, mobility grouping on. Total pages: 1537962
137[ 0.067722] Policy zone: Normal
138[ 0.067723] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-27-generic root=UUID=da590515-c8a7-4db3-b4df-690a6de87c09 ro quiet splash vt.handoff=1
139[ 0.074966] Calgary: detecting Calgary via BIOS EBDA area
140[ 0.074968] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
141[ 0.103435] Memory: 5986840K/6249588K available (14339K kernel code, 2335K rwdata, 4316K rodata, 2584K init, 5196K bss, 262748K reserved, 0K cma-reserved)
142[ 0.103601] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
143[ 0.103607] Kernel/User page tables isolation: enabled
144[ 0.103626] ftrace: allocating 41591 entries in 163 pages
145[ 0.124680] rcu: Hierarchical RCU implementation.
146[ 0.124682] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
147[ 0.124683] Tasks RCU enabled.
148[ 0.124683] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
149[ 0.124684] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
150[ 0.128371] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
151[ 0.128681] vt handoff: transparent VT on vt#1
152[ 0.128688] Console: colour dummy device 80x25
153[ 0.128692] printk: console [tty0] enabled
154[ 0.128708] ACPI: Core revision 20181213
155[ 0.128863] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
156[ 0.128872] hpet clockevent registered
157[ 0.128876] APIC: Switch to symmetric I/O mode setup
158[ 0.129377] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
159[ 0.148877] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x284320bb88e, max_idle_ns: 440795289783 ns
160[ 0.148887] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.38 BogoMIPS (lpj=11172764)
161[ 0.148889] pid_max: default: 32768 minimum: 301
162[ 0.148924] LSM: Security Framework initializing
163[ 0.148935] Yama: becoming mindful.
164[ 0.148951] AppArmor: AppArmor initialized
165[ 0.150468] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
166[ 0.151429] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
167[ 0.151474] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
168[ 0.151505] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
169[ 0.151756] mce: CPU0: Thermal monitoring enabled (TM1)
170[ 0.151765] process: using mwait in idle threads
171[ 0.151768] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
172[ 0.151768] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
173[ 0.151769] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
174[ 0.151771] Spectre V2 : Mitigation: Full generic retpoline
175[ 0.151771] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
176[ 0.151772] Spectre V2 : Enabling Restricted Speculation for firmware calls
177[ 0.151780] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
178[ 0.151781] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
179[ 0.151804] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
180[ 0.151937] Freeing SMP alternatives memory: 36K
181[ 0.160878] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz (family: 0x6, model: 0x1e, stepping: 0x5)
182[ 0.160878] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
183[ 0.160878] core: CPU erratum AAJ80 worked around
184[ 0.160878] core: CPUID marked event: 'bus cycles' unavailable
185[ 0.160878] ... version: 3
186[ 0.160878] ... bit width: 48
187[ 0.160878] ... generic registers: 4
188[ 0.160878] ... value mask: 0000ffffffffffff
189[ 0.160878] ... max period: 000000007fffffff
190[ 0.160878] ... fixed-purpose events: 3
191[ 0.160878] ... event mask: 000000070000000f
192[ 0.160878] rcu: Hierarchical SRCU implementation.
193[ 0.160878] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
194[ 0.160878] smp: Bringing up secondary CPUs ...
195[ 0.160878] x86: Booting SMP configuration:
196[ 0.160878] .... node #0, CPUs: #1 #2 #3
197[ 0.167839] smp: Brought up 1 node, 4 CPUs
198[ 0.167839] smpboot: Max logical packages: 2
199[ 0.167839] smpboot: Total of 4 processors activated (22345.52 BogoMIPS)
200[ 0.169174] devtmpfs: initialized
201[ 0.169174] x86/mm: Memory block size: 128MB
202[ 0.169496] PM: Registering ACPI NVS region [mem 0xbd78e000-0xbd7cffff] (270336 bytes)
203[ 0.169496] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
204[ 0.169496] futex hash table entries: 2048 (order: 5, 131072 bytes)
205[ 0.169496] pinctrl core: initialized pinctrl subsystem
206[ 0.169496] RTC time: 17:54:55, date: 2019-09-14
207[ 0.169496] NET: Registered protocol family 16
208[ 0.169496] audit: initializing netlink subsys (disabled)
209[ 0.169496] audit: type=2000 audit(1568483694.040:1): state=initialized audit_enabled=0 res=1
210[ 0.169496] EISA bus registered
211[ 0.169496] cpuidle: using governor ladder
212[ 0.169496] cpuidle: using governor menu
213[ 0.169496] ACPI: bus type PCI registered
214[ 0.169496] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
215[ 0.169496] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
216[ 0.169496] PCI: not using MMCONFIG
217[ 0.169496] PCI: Using configuration type 1 for base access
218[ 0.174047] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
219[ 0.174047] ACPI: Added _OSI(Module Device)
220[ 0.174047] ACPI: Added _OSI(Processor Device)
221[ 0.174047] ACPI: Added _OSI(3.0 _SCP Extensions)
222[ 0.174047] ACPI: Added _OSI(Processor Aggregator Device)
223[ 0.174047] ACPI: Added _OSI(Linux-Dell-Video)
224[ 0.174047] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
225[ 0.174047] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
226[ 0.179677] ACPI: 2 ACPI AML tables successfully acquired and loaded
227[ 0.181360] ACPI: Dynamic OEM Table Load:
228[ 0.181367] ACPI: SSDT 0xFFFF9A76795BA000 001238 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
229[ 0.182479] ACPI: Dynamic OEM Table Load:
230[ 0.182483] ACPI: SSDT 0xFFFF9A76781CD800 0004F4 (v01 PmRef P001Cst 00003001 INTL 20051117)
231[ 0.183211] ACPI: Interpreter enabled
232[ 0.183228] ACPI: (supports S0 S3 S4 S5)
233[ 0.183229] ACPI: Using IOAPIC for interrupt routing
234[ 0.183261] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
235[ 0.184106] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
236[ 0.184120] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
237[ 0.184334] ACPI: Enabled 14 GPEs in block 00 to 3F
238[ 0.193683] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
239[ 0.193688] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
240[ 0.193984] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug LTR]
241[ 0.194265] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
242[ 0.194849] PCI host bridge to bus 0000:00
243[ 0.194851] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
244[ 0.194852] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
245[ 0.194854] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
246[ 0.194855] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
247[ 0.194856] pci_bus 0000:00: root bus resource [mem 0xbe000000-0xdfffffff window]
248[ 0.194857] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
249[ 0.194858] pci_bus 0000:00: root bus resource [mem 0x400000000-0xfffffffff window]
250[ 0.194859] pci_bus 0000:00: root bus resource [bus 00-ff]
251[ 0.194867] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
252[ 0.195000] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
253[ 0.195024] pci 0000:00:03.0: enabling Extended Tags
254[ 0.195058] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
255[ 0.195167] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
256[ 0.195295] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
257[ 0.195423] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
258[ 0.195546] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
259[ 0.195658] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
260[ 0.195761] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
261[ 0.195881] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
262[ 0.195911] pci 0000:00:16.0: reg 0x10: [mem 0xf9fffc00-0xf9fffc0f 64bit]
263[ 0.195999] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
264[ 0.196101] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
265[ 0.196121] pci 0000:00:1a.0: reg 0x10: [mem 0xf9ffc000-0xf9ffc3ff]
266[ 0.196202] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
267[ 0.196301] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
268[ 0.196322] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
269[ 0.196394] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
270[ 0.196490] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
271[ 0.196563] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
272[ 0.196676] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
273[ 0.196696] pci 0000:00:1d.0: reg 0x10: [mem 0xf9ff6000-0xf9ff63ff]
274[ 0.196775] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
275[ 0.196873] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
276[ 0.197013] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
277[ 0.197207] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
278[ 0.197224] pci 0000:00:1f.2: reg 0x10: [io 0xcc00-0xcc07]
279[ 0.197230] pci 0000:00:1f.2: reg 0x14: [io 0xc880-0xc883]
280[ 0.197237] pci 0000:00:1f.2: reg 0x18: [io 0xc800-0xc807]
281[ 0.197243] pci 0000:00:1f.2: reg 0x1c: [io 0xc480-0xc483]
282[ 0.197250] pci 0000:00:1f.2: reg 0x20: [io 0xc400-0xc41f]
283[ 0.197256] pci 0000:00:1f.2: reg 0x24: [mem 0xf9ff4000-0xf9ff47ff]
284[ 0.197295] pci 0000:00:1f.2: PME# supported from D3hot
285[ 0.197390] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
286[ 0.197406] pci 0000:00:1f.3: reg 0x10: [mem 0xf9fff800-0xf9fff8ff 64bit]
287[ 0.197424] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
288[ 0.197526] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
289[ 0.197549] pci 0000:00:1f.6: reg 0x10: [mem 0xf9ffe000-0xf9ffefff 64bit]
290[ 0.197732] pci 0000:01:00.0: [10de:0de0] type 00 class 0x030000
291[ 0.197747] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
292[ 0.197756] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
293[ 0.197765] pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
294[ 0.197771] pci 0000:01:00.0: reg 0x24: [io 0xdc00-0xdc7f]
295[ 0.197777] pci 0000:01:00.0: reg 0x30: [mem 0xfbe80000-0xfbefffff pref]
296[ 0.197783] pci 0000:01:00.0: enabling Extended Tags
297[ 0.197877] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
298[ 0.197890] pci 0000:01:00.1: reg 0x10: [mem 0xfbe7c000-0xfbe7ffff]
299[ 0.197924] pci 0000:01:00.1: enabling Extended Tags
300[ 0.208909] pci 0000:00:03.0: PCI bridge to [bus 01]
301[ 0.208914] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
302[ 0.208918] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbefffff]
303[ 0.208924] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
304[ 0.209001] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
305[ 0.209028] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
306[ 0.209054] pci 0000:02:00.0: reg 0x18: [mem 0xf8fff000-0xf8ffffff 64bit pref]
307[ 0.209070] pci 0000:02:00.0: reg 0x20: [mem 0xf8ff8000-0xf8ffbfff 64bit pref]
308[ 0.209081] pci 0000:02:00.0: reg 0x30: [mem 0xfbfe0000-0xfbffffff pref]
309[ 0.209168] pci 0000:02:00.0: supports D1 D2
310[ 0.209169] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
311[ 0.220905] pci 0000:00:1c.0: PCI bridge to [bus 02]
312[ 0.220911] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
313[ 0.220915] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
314[ 0.220923] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
315[ 0.220947] pci_bus 0000:03: extended config space not accessible
316[ 0.221015] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
317[ 0.221023] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
318[ 0.221024] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
319[ 0.221025] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
320[ 0.221027] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
321[ 0.221028] pci 0000:00:1e.0: bridge window [mem 0xbe000000-0xdfffffff window] (subtractive decode)
322[ 0.221029] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
323[ 0.221030] pci 0000:00:1e.0: bridge window [mem 0x400000000-0xfffffffff window] (subtractive decode)
324[ 0.221530] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
325[ 0.221604] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
326[ 0.221676] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
327[ 0.221749] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
328[ 0.221822] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
329[ 0.221894] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
330[ 0.221968] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 *11 12 14 15)
331[ 0.222041] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15)
332[ 0.222149] SCSI subsystem initialized
333[ 0.222149] libata version 3.00 loaded.
334[ 0.222149] pci 0000:01:00.0: vgaarb: setting as boot VGA device
335[ 0.222149] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
336[ 0.222149] pci 0000:01:00.0: vgaarb: bridge control possible
337[ 0.222149] vgaarb: loaded
338[ 0.222149] ACPI: bus type USB registered
339[ 0.222149] usbcore: registered new interface driver usbfs
340[ 0.222149] usbcore: registered new interface driver hub
341[ 0.222149] usbcore: registered new device driver usb
342[ 0.222149] pps_core: LinuxPPS API ver. 1 registered
343[ 0.222149] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
344[ 0.222149] PTP clock support registered
345[ 0.222149] EDAC MC: Ver: 3.0.0
346[ 0.222149] PCI: Using ACPI for IRQ routing
347[ 0.225085] PCI: Discovered peer bus ff
348[ 0.225086] PCI: root bus ff: using default resources
349[ 0.225086] PCI: Probing PCI hardware (bus ff)
350[ 0.225109] PCI host bridge to bus 0000:ff
351[ 0.225111] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
352[ 0.225112] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
353[ 0.225113] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
354[ 0.225115] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
355[ 0.225119] pci 0000:ff:00.0: [8086:2c51] type 00 class 0x060000
356[ 0.225159] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
357[ 0.225196] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
358[ 0.225231] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
359[ 0.225268] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
360[ 0.225303] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
361[ 0.225338] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
362[ 0.225373] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
363[ 0.225409] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
364[ 0.225443] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
365[ 0.225479] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
366[ 0.225515] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
367[ 0.225549] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
368[ 0.225584] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
369[ 0.225618] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
370[ 0.225663] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
371[ 0.225665] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
372[ 0.225669] PCI: pci_cache_line_size set to 64 bytes
373[ 0.225719] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
374[ 0.225721] e820: reserve RAM buffer [mem 0xbd780000-0xbfffffff]
375[ 0.225815] NetLabel: Initializing
376[ 0.225816] NetLabel: domain hash size = 128
377[ 0.225816] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
378[ 0.225831] NetLabel: unlabeled traffic allowed by default
379[ 0.229470] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
380[ 0.229476] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
381[ 0.229479] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
382[ 0.231504] hpet: hpet2 irq 24 for MSI
383[ 0.231516] hpet: hpet3 irq 25 for MSI
384[ 0.231516] hpet: hpet4 irq 26 for MSI
385[ 0.231516] hpet: hpet5 irq 27 for MSI
386[ 0.231516] clocksource: Switched to clocksource tsc-early
387[ 0.241331] VFS: Disk quotas dquot_6.6.0
388[ 0.241350] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
389[ 0.241460] AppArmor: AppArmor Filesystem Enabled
390[ 0.241487] pnp: PnP ACPI init
391[ 0.241586] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
392[ 0.241588] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
393[ 0.241589] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
394[ 0.241591] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
395[ 0.241596] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
396[ 0.241673] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
397[ 0.241742] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 0.241884] system 00:03: [io 0x0a00-0x0a0f] has been reserved
399[ 0.241888] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
400[ 0.242093] system 00:04: [io 0x04d0-0x04d1] has been reserved
401[ 0.242095] system 00:04: [io 0x0800-0x087f] has been reserved
402[ 0.242096] system 00:04: [io 0x0500-0x057f] has been reserved
403[ 0.242100] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
404[ 0.242101] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
405[ 0.242102] system 00:04: [mem 0xfed40000-0xfed8ffff] has been reserved
406[ 0.242106] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
407[ 0.242292] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
408[ 0.242294] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
409[ 0.242298] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
410[ 0.242377] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
411[ 0.242381] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
412[ 0.242643] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
413[ 0.242645] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
414[ 0.242646] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
415[ 0.242647] system 00:07: [mem 0x00100000-0xbdffffff] could not be reserved
416[ 0.242649] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
417[ 0.242653] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
418[ 0.242821] pnp: PnP ACPI: found 8 devices
419[ 0.248638] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
420[ 0.248663] pci 0000:00:03.0: PCI bridge to [bus 01]
421[ 0.248665] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
422[ 0.248668] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbefffff]
423[ 0.248671] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
424[ 0.248675] pci 0000:00:1c.0: PCI bridge to [bus 02]
425[ 0.248676] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
426[ 0.248680] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
427[ 0.248682] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
428[ 0.248687] pci 0000:00:1e.0: PCI bridge to [bus 03]
429[ 0.248696] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
430[ 0.248697] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
431[ 0.248699] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
432[ 0.248700] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
433[ 0.248701] pci_bus 0000:00: resource 8 [mem 0xbe000000-0xdfffffff window]
434[ 0.248702] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
435[ 0.248703] pci_bus 0000:00: resource 10 [mem 0x400000000-0xfffffffff window]
436[ 0.248704] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
437[ 0.248705] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbefffff]
438[ 0.248706] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
439[ 0.248708] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
440[ 0.248709] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
441[ 0.248710] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
442[ 0.248711] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
443[ 0.248712] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
444[ 0.248713] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
445[ 0.248714] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
446[ 0.248716] pci_bus 0000:03: resource 8 [mem 0xbe000000-0xdfffffff window]
447[ 0.248717] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed8ffff window]
448[ 0.248718] pci_bus 0000:03: resource 10 [mem 0x400000000-0xfffffffff window]
449[ 0.248784] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
450[ 0.248785] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
451[ 0.248817] NET: Registered protocol family 2
452[ 0.248997] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
453[ 0.249043] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
454[ 0.249227] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
455[ 0.249495] TCP: Hash tables configured (established 65536 bind 65536)
456[ 0.249542] UDP hash table entries: 4096 (order: 5, 131072 bytes)
457[ 0.249595] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
458[ 0.249695] NET: Registered protocol family 1
459[ 0.249700] NET: Registered protocol family 44
460[ 0.250107] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
461[ 0.250117] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
462[ 0.250144] PCI: CLS 32 bytes, default 64
463[ 0.250183] Unpacking initramfs...
464[ 0.484889] random: fast init done
465[ 1.133903] Freeing initrd memory: 63712K
466[ 1.133906] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
467[ 1.133907] software IO TLB: mapped [mem 0xb9780000-0xbd780000] (64MB)
468[ 1.134086] check: Scanning for low memory corruption every 60 seconds
469[ 1.135799] Initialise system trusted keyrings
470[ 1.135809] Key type blacklist registered
471[ 1.135836] workingset: timestamp_bits=36 max_order=21 bucket_order=0
472[ 1.137226] zbud: loaded
473[ 1.137641] squashfs: version 4.0 (2009/01/31) Phillip Lougher
474[ 1.137829] fuse init (API version 7.28)
475[ 1.174683] Key type asymmetric registered
476[ 1.174684] Asymmetric key parser 'x509' registered
477[ 1.174693] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
478[ 1.174720] io scheduler mq-deadline registered
479[ 1.175040] pcieport 0000:00:03.0: Signaling PME with IRQ 29
480[ 1.175100] aer 0000:00:03.0:pcie002: AER enabled with IRQ 29
481[ 1.175278] pcieport 0000:00:1c.0: Signaling PME with IRQ 30
482[ 1.175335] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
483[ 1.175389] vesafb: mode is 1280x800x32, linelength=5120, pages=0
484[ 1.175390] vesafb: scrolling: redraw
485[ 1.175391] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
486[ 1.175404] vesafb: framebuffer at 0xcf000000, mapped to 0x(____ptrval____), using 4032k, total 4032k
487[ 1.175495] Console: switching to colour frame buffer device 160x50
488[ 1.175523] fb0: VESA VGA frame buffer device
489[ 1.175537] intel_idle: MWAIT substates: 0x1120
490[ 1.175537] intel_idle: v0.4.1 model 0x1E
491[ 1.175674] intel_idle: lapic_timer_reliable_states 0x2
492[ 1.175763] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
493[ 1.175772] ACPI: Power Button [PWRB]
494[ 1.175803] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
495[ 1.175863] ACPI: Power Button [PWRF]
496[ 1.176357] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
497[ 1.178903] Linux agpgart interface v0.103
498[ 1.181658] loop: module loaded
499[ 1.181871] libphy: Fixed MDIO Bus: probed
500[ 1.181872] tun: Universal TUN/TAP device driver, 1.6
501[ 1.181927] PPP generic driver version 2.4.2
502[ 1.181977] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
503[ 1.181980] ehci-pci: EHCI PCI platform driver
504[ 1.182099] ehci-pci 0000:00:1a.0: EHCI Host Controller
505[ 1.182104] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
506[ 1.182115] ehci-pci 0000:00:1a.0: debug port 2
507[ 1.186033] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
508[ 1.186043] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf9ffc000
509[ 1.201105] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
510[ 1.201192] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
511[ 1.201194] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
512[ 1.201195] usb usb1: Product: EHCI Host Controller
513[ 1.201196] usb usb1: Manufacturer: Linux 5.0.0-27-generic ehci_hcd
514[ 1.201197] usb usb1: SerialNumber: 0000:00:1a.0
515[ 1.201501] hub 1-0:1.0: USB hub found
516[ 1.201515] hub 1-0:1.0: 2 ports detected
517[ 1.201749] ehci-pci 0000:00:1d.0: EHCI Host Controller
518[ 1.201753] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
519[ 1.201763] ehci-pci 0000:00:1d.0: debug port 2
520[ 1.205667] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
521[ 1.205678] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf9ff6000
522[ 1.221124] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
523[ 1.221198] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
524[ 1.221200] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
525[ 1.221201] usb usb2: Product: EHCI Host Controller
526[ 1.221202] usb usb2: Manufacturer: Linux 5.0.0-27-generic ehci_hcd
527[ 1.221203] usb usb2: SerialNumber: 0000:00:1d.0
528[ 1.221494] hub 2-0:1.0: USB hub found
529[ 1.221508] hub 2-0:1.0: 2 ports detected
530[ 1.221643] ehci-platform: EHCI generic platform driver
531[ 1.221650] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
532[ 1.221653] ohci-pci: OHCI PCI platform driver
533[ 1.221663] ohci-platform: OHCI generic platform driver
534[ 1.221668] uhci_hcd: USB Universal Host Controller Interface driver
535[ 1.221715] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
536[ 1.221716] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
537[ 1.221912] serio: i8042 KBD port at 0x60,0x64 irq 1
538[ 1.222318] mousedev: PS/2 mouse device common for all mice
539[ 1.223049] rtc_cmos 00:01: RTC can wake from S4
540[ 1.223254] rtc_cmos 00:01: registered as rtc0
541[ 1.223270] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
542[ 1.223277] i2c /dev entries driver
543[ 1.223350] device-mapper: uevent: version 1.0.3
544[ 1.223440] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
545[ 1.223459] platform eisa.0: Probing EISA bus 0
546[ 1.223461] platform eisa.0: EISA: Cannot allocate resource for mainboard
547[ 1.223462] platform eisa.0: Cannot allocate resource for EISA slot 1
548[ 1.223463] platform eisa.0: Cannot allocate resource for EISA slot 2
549[ 1.223464] platform eisa.0: Cannot allocate resource for EISA slot 3
550[ 1.223465] platform eisa.0: Cannot allocate resource for EISA slot 4
551[ 1.223466] platform eisa.0: Cannot allocate resource for EISA slot 5
552[ 1.223467] platform eisa.0: Cannot allocate resource for EISA slot 6
553[ 1.223468] platform eisa.0: Cannot allocate resource for EISA slot 7
554[ 1.223469] platform eisa.0: Cannot allocate resource for EISA slot 8
555[ 1.223470] platform eisa.0: EISA: Detected 0 cards
556[ 1.223626] ledtrig-cpu: registered to indicate activity on CPUs
557[ 1.223842] NET: Registered protocol family 10
558[ 1.231350] Segment Routing with IPv6
559[ 1.231392] NET: Registered protocol family 17
560[ 1.231524] Key type dns_resolver registered
561[ 1.232345] mce: Using 9 MCE banks
562[ 1.232364] RAS: Correctable Errors collector initialized.
563[ 1.232441] microcode: sig=0x106e5, pf=0x2, revision=0xa
564[ 1.232658] microcode: Microcode Update Driver: v2.2.
565[ 1.232676] sched_clock: Marking stable (1232430389, 215613)->(1359803089, -127157087)
566[ 1.232993] registered taskstats version 1
567[ 1.233001] Loading compiled-in X.509 certificates
568[ 1.234987] Loaded X.509 cert 'Build time autogenerated kernel key: 44048b015ce66fb3392e6cd278855a5859c60678'
569[ 1.235005] zswap: loaded using pool lzo/zbud
570[ 1.241586] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
571[ 1.242298] Key type big_key registered
572[ 1.242304] Key type trusted registered
573[ 1.245807] Key type encrypted registered
574[ 1.245813] AppArmor: AppArmor sha1 policy hashing enabled
575[ 1.245822] ima: No TPM chip found, activating TPM-bypass!
576[ 1.245830] ima: Allocated hash algorithm: sha1
577[ 1.245841] No architecture policies found
578[ 1.245855] evm: Initialising EVM extended attributes:
579[ 1.245857] evm: security.selinux
580[ 1.245858] evm: security.SMACK64
581[ 1.245859] evm: security.SMACK64EXEC
582[ 1.245859] evm: security.SMACK64TRANSMUTE
583[ 1.245860] evm: security.SMACK64MMAP
584[ 1.245861] evm: security.apparmor
585[ 1.245862] evm: security.ima
586[ 1.245863] evm: security.capability
587[ 1.245865] evm: HMAC attrs: 0x1
588[ 1.246282] Magic number: 3:764:946
589[ 1.246321] tty tty3: hash matches
590[ 1.246358] processor cpu1: hash matches
591[ 1.246494] rtc_cmos 00:01: setting system clock to 2019-09-14T17:54:56 UTC (1568483696)
592[ 1.249048] Freeing unused decrypted memory: 2040K
593[ 1.249675] Freeing unused kernel image memory: 2584K
594[ 1.273237] Write protecting the kernel read-only data: 22528k
595[ 1.273934] Freeing unused kernel image memory: 2016K
596[ 1.274414] Freeing unused kernel image memory: 1828K
597[ 1.286142] x86/mm: Checked W+X mappings: passed, no W+X pages found.
598[ 1.286245] x86/mm: Checking user space page tables
599[ 1.297846] x86/mm: Checked W+X mappings: passed, no W+X pages found.
600[ 1.297849] Run /init as init process
601[ 1.313440] random: systemd-udevd: uninitialized urandom read (16 bytes read)
602[ 1.313533] random: systemd-udevd: uninitialized urandom read (16 bytes read)
603[ 1.313537] random: systemd-udevd: uninitialized urandom read (16 bytes read)
604[ 1.372154] ahci 0000:00:1f.2: version 3.0
605[ 1.372309] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
606[ 1.373776] libphy: r8169: probed
607[ 1.374287] r8169 0000:02:00.0 eth0: RTL8168d/8111d, 40:61:86:62:b2:39, XID 281, IRQ 31
608[ 1.374288] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
609[ 1.382408] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
610[ 1.382410] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
611[ 1.385570] r8169 0000:02:00.0 enp2s0: renamed from eth0
612[ 1.445630] scsi host0: ahci
613[ 1.446046] scsi host1: ahci
614[ 1.446438] scsi host2: ahci
615[ 1.446703] scsi host3: ahci
616[ 1.446876] scsi host4: ahci
617[ 1.447282] scsi host5: ahci
618[ 1.447427] ata1: SATA max UDMA/133 abar m2048@0xf9ff4000 port 0xf9ff4100 irq 32
619[ 1.447430] ata2: SATA max UDMA/133 abar m2048@0xf9ff4000 port 0xf9ff4180 irq 32
620[ 1.447432] ata3: SATA max UDMA/133 abar m2048@0xf9ff4000 port 0xf9ff4200 irq 32
621[ 1.447436] ata4: SATA max UDMA/133 abar m2048@0xf9ff4000 port 0xf9ff4280 irq 32
622[ 1.447438] ata5: SATA max UDMA/133 abar m2048@0xf9ff4000 port 0xf9ff4300 irq 32
623[ 1.447439] ata6: SATA max UDMA/133 abar m2048@0xf9ff4000 port 0xf9ff4380 irq 32
624[ 1.537002] usb 1-1: new high-speed USB device number 2 using ehci-pci
625[ 1.556999] usb 2-1: new high-speed USB device number 2 using ehci-pci
626[ 1.697775] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
627[ 1.697779] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
628[ 1.698368] hub 1-1:1.0: USB hub found
629[ 1.698522] hub 1-1:1.0: 6 ports detected
630[ 1.717883] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
631[ 1.717887] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
632[ 1.718492] hub 2-1:1.0: USB hub found
633[ 1.718647] hub 2-1:1.0: 8 ports detected
634[ 1.760655] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
635[ 1.761590] ata1.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
636[ 1.761593] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
637[ 1.784604] ata1.00: configured for UDMA/133
638[ 1.785058] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
639[ 1.785689] sd 0:0:0:0: Attached scsi generic sg0 type 0
640[ 1.786082] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
641[ 1.786086] sd 0:0:0:0: [sda] 4096-byte physical blocks
642[ 1.786161] sd 0:0:0:0: [sda] Write Protect is off
643[ 1.786164] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
644[ 1.786300] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
645[ 1.870491] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
646[ 1.872867] sd 0:0:0:0: [sda] Attached SCSI disk
647[ 2.004995] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
648[ 2.101691] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
649[ 2.103389] ata2.00: ATA-8: Hitachi HDS723020BLA642, MN6OA580, max UDMA/133
650[ 2.103392] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
651[ 2.105292] ata2.00: configured for UDMA/133
652[ 2.105732] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72302 A580 PQ: 0 ANSI: 5
653[ 2.106397] sd 1:0:0:0: Attached scsi generic sg1 type 0
654[ 2.106473] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
655[ 2.106498] sd 1:0:0:0: [sdb] Write Protect is off
656[ 2.106501] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
657[ 2.106534] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
658[ 2.120433] usb 2-1.1: New USB device found, idVendor=090c, idProduct=6300, bcdDevice= 1.00
659[ 2.120437] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
660[ 2.120440] usb 2-1.1: Product: USB2.0 Card Reader
661[ 2.120442] usb 2-1.1: Manufacturer: SMI
662[ 2.120444] usb 2-1.1: SerialNumber: 12345678901234567890
663[ 2.124298] usb-storage 2-1.1:1.0: USB Mass Storage device detected
664[ 2.124443] scsi host6: usb-storage 2-1.1:1.0
665[ 2.124506] usbcore: registered new interface driver usb-storage
666[ 2.125828] usbcore: registered new interface driver uas
667[ 2.145114] tsc: Refined TSC clocksource calibration: 2793.314 MHz
668[ 2.145124] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x284394b23f9, max_idle_ns: 440795283844 ns
669[ 2.145222] clocksource: Switched to clocksource tsc
670[ 2.164130] sdb: sdb1 sdb2 < sdb5 sdb6 >
671[ 2.164668] sd 1:0:0:0: [sdb] Attached SCSI disk
672[ 2.200992] usb 2-1.6: new low-speed USB device number 4 using ehci-pci
673[ 2.314925] usb 2-1.6: New USB device found, idVendor=09da, idProduct=c10a, bcdDevice=10.32
674[ 2.314929] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
675[ 2.314931] usb 2-1.6: Product: USB Mouse
676[ 2.314934] usb 2-1.6: Manufacturer: A4Tech
677[ 2.319223] hidraw: raw HID events driver (C) Jiri Kosina
678[ 2.323947] usbcore: registered new interface driver usbhid
679[ 2.323948] usbhid: USB HID core driver
680[ 2.325782] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:09DA:C10A.0001/input/input3
681[ 2.326141] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:09DA:C10A.0001/input/input4
682[ 2.326345] hid-generic 0003:09DA:C10A.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.0-1.6/input0
683[ 2.420970] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
684[ 2.426900] ata3.00: HPA detected: current 1953523055, native 1953525168
685[ 2.427094] ata3.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
686[ 2.427097] ata3.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 32), AA
687[ 2.433396] ata3.00: configured for UDMA/133
688[ 2.433845] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 0001 PQ: 0 ANSI: 5
689[ 2.434582] sd 2:0:0:0: Attached scsi generic sg2 type 0
690[ 2.434829] sd 2:0:0:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB)
691[ 2.434934] sd 2:0:0:0: [sdc] Write Protect is off
692[ 2.434938] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
693[ 2.435132] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
694[ 2.492799] sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 sdc8 >
695[ 2.494993] sd 2:0:0:0: [sdc] Attached SCSI removable disk
696[ 2.749644] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
697[ 2.750852] ata4.00: ATA-8: ST500DM002-1BD142, HP74, max UDMA/100
698[ 2.750856] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32)
699[ 2.752442] ata4.00: configured for UDMA/100
700[ 2.752901] scsi 3:0:0:0: Direct-Access ATA ST500DM002-1BD14 HP74 PQ: 0 ANSI: 5
701[ 2.753561] sd 3:0:0:0: Attached scsi generic sg3 type 0
702[ 2.753705] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
703[ 2.753707] sd 3:0:0:0: [sdd] 4096-byte physical blocks
704[ 2.753747] sd 3:0:0:0: [sdd] Write Protect is off
705[ 2.753748] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
706[ 2.753840] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
707[ 2.777454] sdd: sdd1 sdd2 sdd3
708[ 2.778485] sd 3:0:0:0: [sdd] Attached SCSI disk
709[ 3.069152] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
710[ 3.072309] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
711[ 3.076164] ata5.00: configured for UDMA/100
712[ 3.086314] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5
713[ 3.139027] scsi 6:0:0:0: Direct-Access SMI Reader 1.00 PQ: 0 ANSI: 0 CCS
714[ 3.139540] sd 6:0:0:0: Attached scsi generic sg4 type 0
715[ 3.141629] sd 6:0:0:0: [sde] Attached SCSI removable disk
716[ 3.152736] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
717[ 3.152739] cdrom: Uniform CD-ROM driver Revision: 3.20
718[ 3.153149] sr 4:0:0:0: Attached scsi CD-ROM sr0
719[ 3.153213] sr 4:0:0:0: Attached scsi generic sg5 type 5
720[ 3.469712] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
721[ 3.472678] ata6.00: ATAPI: HL-DT-ST BD-RE BH16NS40, 1.03, max UDMA/100
722[ 3.482029] ata6.00: configured for UDMA/100
723[ 3.494803] scsi 5:0:0:0: CD-ROM HL-DT-ST BD-RE BH16NS40 1.03 PQ: 0 ANSI: 5
724[ 3.564057] sr 5:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
725[ 3.564495] sr 5:0:0:0: Attached scsi CD-ROM sr1
726[ 3.564559] sr 5:0:0:0: Attached scsi generic sg6 type 5
727[ 3.895735] random: crng init done
728[ 3.895738] random: 7 urandom warning(s) missed due to ratelimiting
729[ 5.636972] raid6: sse2x4 gen() 10817 MB/s
730[ 5.684967] raid6: sse2x4 xor() 7661 MB/s
731[ 5.732965] raid6: sse2x2 gen() 9479 MB/s
732[ 5.781049] raid6: sse2x2 xor() 7043 MB/s
733[ 5.828966] raid6: sse2x1 gen() 8003 MB/s
734[ 5.876965] raid6: sse2x1 xor() 6038 MB/s
735[ 5.876966] raid6: using algorithm sse2x4 gen() 10817 MB/s
736[ 5.876966] raid6: .... xor() 7661 MB/s, rmw enabled
737[ 5.876967] raid6: using ssse3x2 recovery algorithm
738[ 5.880194] xor: measuring software checksum speed
739[ 5.916964] prefetch64-sse: 13675.000 MB/sec
740[ 5.956962] generic_sse: 11810.000 MB/sec
741[ 5.956962] xor: using function: prefetch64-sse (13675.000 MB/sec)
742[ 5.975184] Btrfs loaded, crc32c=crc32c-intel
743[ 6.611096] BTRFS: device label Snapshot devid 1 transid 685 /dev/sdd3
744[ 6.716668] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
745[ 7.676765] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
746[ 8.058529] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
747[ 8.077298] systemd[1]: Detected architecture x86-64.
748[ 8.089628] systemd[1]: Set hostname to <mario-MS-7616>.
749[ 13.098914] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
750[ 13.098983] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
751[ 13.099155] systemd[1]: Created slice User and Session Slice.
752[ 13.099170] systemd[1]: Reached target Remote File Systems.
753[ 13.099302] systemd[1]: Created slice System Slice.
754[ 13.099374] systemd[1]: Listening on fsck to fsckd communication Socket.
755[ 13.099440] systemd[1]: Listening on udev Control Socket.
756[ 13.099453] systemd[1]: Reached target Slices.
757[ 13.099532] systemd[1]: Listening on Journal Socket.
758[ 13.100158] systemd[1]: Starting Set the console keyboard layout...
759[ 13.392178] EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro
760[ 13.488522] systemd-journald[445]: Received request to flush runtime journal from PID 1
761[ 13.790153] lp: driver loaded but no devices found
762[ 13.855782] ppdev: user-space parallel port driver
763[ 18.918059] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20181213/utaddress-213)
764[ 18.918065] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
765[ 18.918087] lpc_ich: Resource conflict(s) found affecting gpio_ich
766[ 19.088177] intel ips 0000:00:1f.6: Non-IPS CPU detected.
767[ 19.088179] intel ips 0000:00:1f.6: IPS not supported on this CPU
768[ 19.247548] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
769[ 19.247569] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
770[ 19.247584] EDAC i7core: Driver loaded, 1 memory controller(s) found.
771[ 19.472361] IPMI message handler: version 39.2
772[ 19.552973] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: Could not read FW version
773[ 19.552982] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: FW version command failed -5
774[ 19.608207] ipmi device interface
775[ 19.733633] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
776[ 19.982867] pktcdvd: pktcdvd0: writer mapped to sr0
777[ 20.015421] pktcdvd: pktcdvd1: writer mapped to sr1
778[ 20.205658] snd_hda_intel 0000:01:00.1: Disabling MSI
779[ 20.205665] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
780[ 20.328597] gpio_ich gpio_ich.1.auto: GPIO from 436 to 511
781[ 20.469929] nvidia: loading out-of-tree module taints kernel.
782[ 20.469937] nvidia: module license 'NVIDIA' taints kernel.
783[ 20.469937] Disabling lock debugging due to kernel taint
784[ 20.477373] nvidia: module verification failed: signature and/or required key missing - tainting kernel
785[ 20.484556] nvidia-nvlink: Nvlink Core is being initialized, major device number 238
786[ 20.484629] snd_hda_codec_realtek hdaudioC0D0: ALC888: SKU not ready 0x411111f0
787[ 20.484941] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
788[ 20.484956] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
789[ 20.484958] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
790[ 20.484959] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
791[ 20.484960] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
792[ 20.484961] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
793[ 20.484962] snd_hda_codec_realtek hdaudioC0D0: inputs:
794[ 20.484963] snd_hda_codec_realtek hdaudioC0D0: Line=0x18
795[ 20.485034] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.116 Sun Jan 27 07:21:36 PST 2019 (using threaded interrupts)
796[ 20.589470] snd_hda_codec_hdmi hdaudioC0D3: No i915 binding for Intel HDMI/DP codec
797[ 20.589793] hdaudio hdaudioC0D3: Unable to bind the codec
798[ 20.590771] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
799[ 20.590820] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
800[ 20.590862] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
801[ 20.590939] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
802[ 20.591048] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
803[ 20.748534] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.116 Sun Jan 27 06:30:32 PST 2019
804[ 20.776825] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
805[ 20.776827] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
806[ 20.954407] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 237
807[ 21.409689] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input10
808[ 21.409742] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input11
809[ 21.409832] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input12
810[ 21.409939] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
811[ 21.811218] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
812[ 21.811498] caller os_map_kernel_space.part.8+0x10b/0x150 [nvidia] mapping multiple BARs
813[ 22.363324] Adding 2194428k swap on /dev/sdc6. Priority:-2 extents:1 across:2194428k FS
814[ 22.797601] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null)
815[ 29.444258] audit: type=1400 audit(1568476524.694:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=856 comm="apparmor_parser"
816[ 29.444261] audit: type=1400 audit(1568476524.694:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=856 comm="apparmor_parser"
817[ 29.444263] audit: type=1400 audit(1568476524.694:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=856 comm="apparmor_parser"
818[ 29.444450] audit: type=1400 audit(1568476524.694:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=857 comm="apparmor_parser"
819[ 29.445457] audit: type=1400 audit(1568476524.698:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=854 comm="apparmor_parser"
820[ 29.445461] audit: type=1400 audit(1568476524.698:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=854 comm="apparmor_parser"
821[ 29.445463] audit: type=1400 audit(1568476524.698:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=854 comm="apparmor_parser"
822[ 29.445465] audit: type=1400 audit(1568476524.698:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=854 comm="apparmor_parser"
823[ 29.445665] audit: type=1400 audit(1568476524.698:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=853 comm="apparmor_parser"
824[ 29.445667] audit: type=1400 audit(1568476524.698:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=853 comm="apparmor_parser"
825[ 30.163825] vboxdrv: Found 4 processor cores
826[ 30.181292] vboxdrv: TSC mode is Invariant, tentative frequency 2793307578 Hz
827[ 30.181293] vboxdrv: Successfully loaded version 6.0.10 (interface 0x00290008)
828[ 30.601793] VBoxNetFlt: Successfully started.
829[ 30.603136] VBoxNetAdp: Successfully started.
830[ 30.604408] VBoxPciLinuxInit
831[ 30.606601] vboxpci: IOMMU not found (not registered)
832[ 33.391364] RTL8211B Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
833[ 33.550515] r8169 0000:02:00.0 enp2s0: Link is Down
834[ 34.945605] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
835[ 34.945869] caller os_map_kernel_space.part.8+0x10b/0x150 [nvidia] mapping multiple BARs
836[ 35.144778] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx
837[ 35.144787] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
838[ 43.454598] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
839[ 307.618888] BTRFS info (device sdd3): disk space caching is enabled
840[ 307.618891] BTRFS info (device sdd3): has skinny extents
841[ 579.928713] perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
842[ 991.942689] perf: interrupt took too long (3145 > 3137), lowering kernel.perf_event_max_sample_rate to 63500
843[ 2089.149570] perf: interrupt took too long (4000 > 3931), lowering kernel.perf_event_max_sample_rate to 50000