· 7 years ago · Oct 21, 2018, 10:58 AM
1[ 0.000000] Linux version 3.4.2-gentootiling (root@localhost) (gcc version 4.7.0 (GCC) ) #1 Fri Jun 15 13:55:20 BST 2012
2[ 0.000000] BIOS-provided physical RAM map:
3[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
4[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
5[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
6[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
7[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
8[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
9[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
10[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
11[ 0.000000] DMI 2.3 present.
12[ 0.000000] DMI: /UL8 (ULI M1689), BIOS 6.00 PG 06/27/2005
13[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
14[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
15[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
16[ 0.000000] MTRR default type: uncachable
17[ 0.000000] MTRR fixed ranges enabled:
18[ 0.000000] 00000-9FFFF write-back
19[ 0.000000] A0000-BFFFF uncachable
20[ 0.000000] C0000-C7FFF write-protect
21[ 0.000000] C8000-FFFFF uncachable
22[ 0.000000] MTRR variable ranges enabled:
23[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
24[ 0.000000] 1 base 00C0000000 mask FFF0000000 write-combining
25[ 0.000000] 2 disabled
26[ 0.000000] 3 disabled
27[ 0.000000] 4 disabled
28[ 0.000000] 5 disabled
29[ 0.000000] 6 disabled
30[ 0.000000] 7 disabled
31[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
32[ 0.000000] initial memory mapped : 0 - 01c00000
33[ 0.000000] Base memory trampoline at [c009e000] 9e000 size 4096
34[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
35[ 0.000000] 0000000000 - 0000400000 page 4k
36[ 0.000000] 0000400000 - 0037400000 page 2M
37[ 0.000000] 0037400000 - 00377fe000 page 4k
38[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
39[ 0.000000] RAMDISK: 37ecc000 - 37ff0000
40[ 0.000000] Allocated new RAMDISK: 376da000 - 377fd9b1
41[ 0.000000] Move RAMDISK from 0000000037ecc000 - 0000000037fef9b0 to 376da000 - 377fd9b0
42[ 0.000000] ACPI: RSDP 000f7bc0 00014 (v00 AWARD )
43[ 0.000000] ACPI: RSDT 3fff3040 00030 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
44[ 0.000000] ACPI: FACP 3fff30c0 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
45[ 0.000000] ACPI: DSDT 3fff3180 04FC6 (v01 AWARD AWRDACPI 00001003 MSFT 0100000E)
46[ 0.000000] ACPI: FACS 3fff0000 00040
47[ 0.000000] ACPI: SSDT 3fff8280 000B5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
48[ 0.000000] ACPI: APIC 3fff81c0 00068 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
49[ 0.000000] ACPI: Local APIC address 0xfee00000
50[ 0.000000] 135MB HIGHMEM available.
51[ 0.000000] 887MB LOWMEM available.
52[ 0.000000] mapped low ram: 0 - 377fe000
53[ 0.000000] low ram: 0 - 377fe000
54[ 0.000000] Zone PFN ranges:
55[ 0.000000] DMA 0x00000010 -> 0x00001000
56[ 0.000000] Normal 0x00001000 -> 0x000377fe
57[ 0.000000] HighMem 0x000377fe -> 0x0003fff0
58[ 0.000000] Movable zone start PFN for each node
59[ 0.000000] Early memory PFN ranges
60[ 0.000000] 0: 0x00000010 -> 0x0000009f
61[ 0.000000] 0: 0x00000100 -> 0x0003fff0
62[ 0.000000] On node 0 totalpages: 262015
63[ 0.000000] free_area_init_node: node 0, pgdat c1817960, node_mem_map f6ed9200
64[ 0.000000] DMA zone: 32 pages used for memmap
65[ 0.000000] DMA zone: 0 pages reserved
66[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
67[ 0.000000] Normal zone: 1744 pages used for memmap
68[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
69[ 0.000000] HighMem zone: 272 pages used for memmap
70[ 0.000000] HighMem zone: 34530 pages, LIFO batch:7
71[ 0.000000] Using APIC driver default
72[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
73[ 0.000000] ACPI: Local APIC address 0xfee00000
74[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
75[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
76[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
77[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
78[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
79[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
80[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
81[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
82[ 0.000000] ACPI: IRQ0 used by override.
83[ 0.000000] ACPI: IRQ2 used by override.
84[ 0.000000] ACPI: IRQ9 used by override.
85[ 0.000000] Using ACPI (MADT) for SMP configuration information
86[ 0.000000] nr_irqs_gsi: 40
87[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
88[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
89[ 0.000000] pcpu-alloc: [0] 0
90[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
91[ 0.000000] Kernel command line: root=/dev/sda8 video=radeon:800x600-32@75
92[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
93[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
94[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
95[ 0.000000] Initializing CPU#0
96[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
97[ 0.000000] Memory: 1028628k/1048512k available (6235k kernel code, 19432k reserved, 2075k data, 444k init, 139208k highmem)
98[ 0.000000] virtual kernel memory layout:
99[ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
100[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
101[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
102[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
103[ 0.000000] .init : 0xc181e000 - 0xc188d000 ( 444 kB)
104[ 0.000000] .data : 0xc1616c77 - 0xc181dc60 (2075 kB)
105[ 0.000000] .text : 0xc1000000 - 0xc1616c77 (6235 kB)
106[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
107[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
108[ 0.000000] CPU 0 irqstacks, hard=f6808000 soft=f680a000
109[ 0.000000] Console: colour VGA+ 80x25
110[ 0.000000] console [tty0] enabled
111[ 0.000000] Fast TSC calibration using PIT
112[ 0.000000] Detected 1840.929 MHz processor.
113[ 0.003334] Calibrating delay loop (skipped), value calculated using timer frequency.. 3683.26 BogoMIPS (lpj=6136430)
114[ 0.003474] pid_max: default: 32768 minimum: 301
115[ 0.003578] Mount-cache hash table entries: 512
116[ 0.003778] mce: CPU supports 5 MCE banks
117[ 0.003855] CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
118[ 0.004009] ACPI: Core revision 20120320
119[ 0.006679] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x0070] at table offset 0x00A6 (20120320/psloop-526)
120[ 0.006845] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x0070] at table offset 0x00AB (20120320/psloop-526)
121[ 0.010059] Performance Events: AMD PMU driver.
122[ 0.010155] ... version: 0
123[ 0.010221] ... bit width: 48
124[ 0.010288] ... generic registers: 4
125[ 0.010354] ... value mask: 0000ffffffffffff
126[ 0.010424] ... max period: 00007fffffffffff
127[ 0.010493] ... fixed-purpose events: 0
128[ 0.010559] ... event mask: 000000000000000f
129[ 0.010676] MCE: In-kernel MCE decoding enabled.
130[ 0.010746] Enabling APIC mode: Flat. Using 1 I/O APICs
131[ 0.014293] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
132[ 0.049997] devtmpfs: initialized
133[ 0.049997] NET: Registered protocol family 16
134[ 0.049997] i2c-core: driver [dummy] registered
135[ 0.049997] EISA bus registered
136[ 0.049997] TOM: 0000000040000000 aka 1024M
137[ 0.049997] node 0 link 0: mmio [a0000, bffff]
138[ 0.049997] node 0 link 0: mmio [40000000, ffff]
139[ 0.049997] bus: [00, ff] on node 0 link 0
140[ 0.049997] bus: 00 index 0 [io 0x0000-0xffff]
141[ 0.049997] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
142[ 0.049997] bus: 00 index 2 [mem 0x40000000-0xffffffff]
143[ 0.049997] ACPI: bus type pci registered
144[ 0.070351] PCI: PCI BIOS revision 2.10 entry at 0xfa0f0, last bus=2
145[ 0.070423] PCI: Using configuration type 1 for base access
146[ 0.075961] bio: create slab <bio-0> at 0
147[ 0.076128] ACPI: Added _OSI(Module Device)
148[ 0.076196] ACPI: Added _OSI(Processor Device)
149[ 0.076265] ACPI: Added _OSI(3.0 _SCP Extensions)
150[ 0.076333] ACPI: Added _OSI(Processor Aggregator Device)
151[ 0.077114] ACPI: EC: Look up EC in DSDT
152[ 0.080223] ACPI: Interpreter enabled
153[ 0.080289] ACPI: (supports S0 S5)
154[ 0.080401] ACPI: Using IOAPIC for interrupt routing
155[ 0.085040] ACPI: No dock devices found.
156[ 0.085112] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
157[ 0.085297] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
158[ 0.085461] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
159[ 0.085464] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
160[ 0.085468] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
161[ 0.085471] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
162[ 0.085474] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
163[ 0.085477] PCI: root bus 00: hardware-probed resources
164[ 0.085527] PCI host bridge to bus 0000:00
165[ 0.085596] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
166[ 0.085668] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
167[ 0.085742] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff]
168[ 0.085829] pci 0000:00:00.0: [10b9:1689] type 00 class 0x060000
169[ 0.085839] pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
170[ 0.085899] pci 0000:00:01.0: [10b9:5246] type 01 class 0x060400
171[ 0.085927] pci 0000:00:02.0: [10b9:5249] type 01 class 0x060400
172[ 0.085956] pci 0000:00:03.0: [10b9:1563] type 00 class 0x060100
173[ 0.086003] pci 0000:00:03.1: [10b9:7101] type 00 class 0x068000
174[ 0.086044] pci 0000:00:03.1: quirk: [io 0x4000-0x403f] claimed by ali7101 ACPI
175[ 0.086174] pci 0000:00:04.0: [10b9:5455] type 00 class 0x040100
176[ 0.086186] pci 0000:00:04.0: reg 10: [io 0xfc00-0xfcff]
177[ 0.086193] pci 0000:00:04.0: reg 14: [mem 0xfdfff000-0xfdffffff]
178[ 0.086233] pci 0000:00:04.0: supports D1 D2
179[ 0.086236] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold
180[ 0.086254] pci 0000:00:0e.0: [10b9:5229] type 00 class 0x0101fa
181[ 0.086261] pci 0000:00:0e.0: reg 10: [io 0x01f0-0x01ff]
182[ 0.086266] pci 0000:00:0e.0: reg 14: [io 0x03f4-0x03f7]
183[ 0.086272] pci 0000:00:0e.0: reg 18: [io 0x0170-0x017f]
184[ 0.086277] pci 0000:00:0e.0: reg 1c: [io 0x0374-0x0377]
185[ 0.086282] pci 0000:00:0e.0: reg 20: [io 0xff00-0xff0f]
186[ 0.086301] pci 0000:00:0f.0: [10b9:5237] type 00 class 0x0c0310
187[ 0.086308] pci 0000:00:0f.0: reg 10: [mem 0xfdffe000-0xfdffefff]
188[ 0.086336] pci 0000:00:0f.1: [10b9:5237] type 00 class 0x0c0310
189[ 0.086343] pci 0000:00:0f.1: reg 10: [mem 0xfdffd000-0xfdffdfff]
190[ 0.086371] pci 0000:00:0f.2: [10b9:5237] type 00 class 0x0c0310
191[ 0.086378] pci 0000:00:0f.2: reg 10: [mem 0xfdffc000-0xfdffcfff]
192[ 0.086408] pci 0000:00:0f.3: [10b9:5239] type 00 class 0x0c0320
193[ 0.086417] pci 0000:00:0f.3: reg 10: [mem 0xfdffb000-0xfdffb0ff]
194[ 0.086448] pci 0000:00:0f.3: PME# supported from D0 D3hot D3cold
195[ 0.086467] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
196[ 0.086485] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
197[ 0.086499] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
198[ 0.086513] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
199[ 0.086545] pci 0000:01:00.0: [1002:4152] type 00 class 0x030000
200[ 0.086556] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
201[ 0.086563] pci 0000:01:00.0: reg 14: [io 0xee00-0xeeff]
202[ 0.086569] pci 0000:01:00.0: reg 18: [mem 0xfddf0000-0xfddfffff]
203[ 0.086587] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
204[ 0.086608] pci 0000:01:00.0: supports D1 D2
205[ 0.086621] pci 0000:01:00.1: [1002:4172] type 00 class 0x038000
206[ 0.086631] pci 0000:01:00.1: reg 10: [mem 0xd0000000-0xdfffffff pref]
207[ 0.086637] pci 0000:01:00.1: reg 14: [mem 0xfdde0000-0xfddeffff]
208[ 0.086676] pci 0000:01:00.1: supports D1 D2
209[ 0.086702] pci 0000:00:01.0: PCI bridge to [bus 01-01]
210[ 0.086773] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
211[ 0.086777] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
212[ 0.086782] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff pref]
213[ 0.086804] pci 0000:02:06.0: [10b9:5237] type 00 class 0x0c0310
214[ 0.086815] pci 0000:02:06.0: reg 10: [mem 0xfdcff000-0xfdcfffff]
215[ 0.086858] pci 0000:02:06.0: PME# supported from D0 D1 D3hot D3cold
216[ 0.086872] pci 0000:02:06.1: [10b9:5237] type 00 class 0x0c0310
217[ 0.086883] pci 0000:02:06.1: reg 10: [mem 0xfdcfe000-0xfdcfefff]
218[ 0.086925] pci 0000:02:06.1: PME# supported from D0 D1 D3hot D3cold
219[ 0.086940] pci 0000:02:06.2: [10b9:5237] type 00 class 0x0c0310
220[ 0.086951] pci 0000:02:06.2: reg 10: [mem 0xfdcfd000-0xfdcfdfff]
221[ 0.086994] pci 0000:02:06.2: PME# supported from D0 D1 D3hot D3cold
222[ 0.087009] pci 0000:02:06.3: [10b9:5239] type 00 class 0x0c0320
223[ 0.087021] pci 0000:02:06.3: reg 10: [mem 0xfdcfc000-0xfdcfc0ff]
224[ 0.087068] pci 0000:02:06.3: PME# supported from D0 D3hot D3cold
225[ 0.087088] pci 0000:02:08.0: [10ec:8139] type 00 class 0x020000
226[ 0.087099] pci 0000:02:08.0: reg 10: [io 0xdc00-0xdcff]
227[ 0.087107] pci 0000:02:08.0: reg 14: [mem 0xfdcfb000-0xfdcfb0ff]
228[ 0.087133] pci 0000:02:08.0: reg 30: [mem 0x00000000-0x0000ffff pref]
229[ 0.087151] pci 0000:02:08.0: supports D1 D2
230[ 0.087153] pci 0000:02:08.0: PME# supported from D1 D2 D3hot D3cold
231[ 0.087169] pci 0000:02:0a.0: [13f0:0200] type 00 class 0x020000
232[ 0.087180] pci 0000:02:0a.0: reg 10: [io 0xdf00-0xdf7f]
233[ 0.087187] pci 0000:02:0a.0: reg 14: [mem 0xfdcfa000-0xfdcfa1ff]
234[ 0.087212] pci 0000:02:0a.0: reg 30: [mem 0x00000000-0x0000ffff pref]
235[ 0.087230] pci 0000:02:0a.0: supports D1 D2
236[ 0.087232] pci 0000:02:0a.0: PME# supported from D1 D2 D3hot D3cold
237[ 0.087254] pci 0000:00:02.0: PCI bridge to [bus 02-02]
238[ 0.087325] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
239[ 0.087329] pci 0000:00:02.0: bridge window [mem 0xfdc00000-0xfdcfffff]
240[ 0.087333] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff pref]
241[ 0.087342] pci_bus 0000:00: on NUMA node 0
242[ 0.087346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
243[ 0.087432] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
244[ 0.087591] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x18)
245[ 0.104703] ACPI: PCI Interrupt Link [LNK1] (IRQs 1 3 4 5 6 *7 10 11 12 14 15)
246[ 0.105265] ACPI: PCI Interrupt Link [LNK2] (IRQs 1 3 4 5 6 *7 10 11 12 14 15)
247[ 0.105824] ACPI: PCI Interrupt Link [LNK3] (IRQs 1 *3 4 5 6 7 10 11 12 14 15)
248[ 0.106387] ACPI: PCI Interrupt Link [LNK4] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
249[ 0.106921] ACPI: PCI Interrupt Link [LNK5] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
250[ 0.107483] ACPI: PCI Interrupt Link [LNK6] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
251[ 0.108045] ACPI: PCI Interrupt Link [LNK7] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
252[ 0.108548] ACPI: PCI Interrupt Link [LNK8] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
253[ 0.109091] ACPI: PCI Interrupt Link [LNK9] (IRQs 1 3 *4 5 6 7 10 11 12 14 15)
254[ 0.109645] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
255[ 0.109760] vgaarb: loaded
256[ 0.109824] vgaarb: bridge control possible 0000:01:00.0
257[ 0.110077] SCSI subsystem initialized
258[ 0.110220] libata version 3.00 loaded.
259[ 0.110291] usbcore: registered new interface driver usbfs
260[ 0.110388] usbcore: registered new interface driver hub
261[ 0.110486] usbcore: registered new device driver usb
262[ 0.110715] Advanced Linux Sound Architecture Driver Version 1.0.25.
263[ 0.110813] PCI: Using ACPI for IRQ routing
264[ 0.110882] PCI: pci_cache_line_size set to 64 bytes
265[ 0.110931] reserve RAM buffer: 000000000009f800 - 000000000009ffff
266[ 0.110934] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
267[ 0.111169] cfg80211: Calling CRDA to update world regulatory domain
268[ 0.111531] FS-Cache: Loaded
269[ 0.114394] pnp: PnP ACPI init
270[ 0.114470] ACPI: bus type pnp registered
271[ 0.114746] pnp 00:00: [mem 0x000cd000-0x000cffff]
272[ 0.114749] pnp 00:00: [mem 0x000f0000-0x000f7fff]
273[ 0.114751] pnp 00:00: [mem 0x000f8000-0x000fbfff]
274[ 0.114754] pnp 00:00: [mem 0x000fc000-0x000fffff]
275[ 0.114756] pnp 00:00: [mem 0x3fff0000-0x3fffffff]
276[ 0.114759] pnp 00:00: [mem 0xffff0000-0xffffffff]
277[ 0.114761] pnp 00:00: [mem 0x00000000-0x0009ffff]
278[ 0.114764] pnp 00:00: [mem 0x00100000-0x3ffeffff]
279[ 0.114766] pnp 00:00: [mem 0xfec00000-0xfec00fff]
280[ 0.114769] pnp 00:00: [mem 0xfee00000-0xfee00fff]
281[ 0.114847] system 00:00: [mem 0x000cd000-0x000cffff] has been reserved
282[ 0.114922] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
283[ 0.114996] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
284[ 0.115070] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
285[ 0.115145] system 00:00: [mem 0x3fff0000-0x3fffffff] could not be reserved
286[ 0.115220] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
287[ 0.115293] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
288[ 0.115368] system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved
289[ 0.115442] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
290[ 0.115517] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
291[ 0.115591] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
292[ 0.115660] pnp 00:01: [bus 00-ff]
293[ 0.115663] pnp 00:01: [io 0x0cf8-0x0cff]
294[ 0.115666] pnp 00:01: [io 0x0000-0x0cf7 window]
295[ 0.115670] pnp 00:01: [io 0x0d00-0xffff window]
296[ 0.115672] pnp 00:01: [io 0x5000-0x501f]
297[ 0.115675] pnp 00:01: [io 0x4000-0x407f]
298[ 0.115677] pnp 00:01: [io 0x04d6]
299[ 0.115680] pnp 00:01: [mem 0x000a0000-0x000bffff window]
300[ 0.115682] pnp 00:01: [mem 0x000c0000-0x000dffff window]
301[ 0.115685] pnp 00:01: [mem 0x40000000-0xfebfffff window]
302[ 0.115750] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
303[ 0.115998] pnp 00:02: [io 0x0010-0x001f]
304[ 0.116001] pnp 00:02: [io 0x0022-0x003f]
305[ 0.116003] pnp 00:02: [io 0x0044-0x005f]
306[ 0.116005] pnp 00:02: [io 0x0062-0x0063]
307[ 0.116007] pnp 00:02: [io 0x0065-0x006f]
308[ 0.116010] pnp 00:02: [io 0x0074-0x007f]
309[ 0.116012] pnp 00:02: [io 0x0091-0x0093]
310[ 0.116014] pnp 00:02: [io 0x00a2-0x00bf]
311[ 0.116017] pnp 00:02: [io 0x00e0-0x00ef]
312[ 0.116019] pnp 00:02: [io 0x0b78-0x0b7b]
313[ 0.116021] pnp 00:02: [io 0x0f78-0x0f7b]
314[ 0.116023] pnp 00:02: [io 0x0a78-0x0a7b]
315[ 0.116026] pnp 00:02: [io 0x0e78-0x0e7b]
316[ 0.116028] pnp 00:02: [io 0x0bbc-0x0bbf]
317[ 0.116030] pnp 00:02: [io 0x0fbc-0x0fbf]
318[ 0.116033] pnp 00:02: [io 0x04d0-0x04d1]
319[ 0.116035] pnp 00:02: [io 0x0294-0x0297]
320[ 0.116037] pnp 00:02: [io 0x0480-0x048f]
321[ 0.116110] system 00:02: [io 0x0b78-0x0b7b] has been reserved
322[ 0.116183] system 00:02: [io 0x0f78-0x0f7b] has been reserved
323[ 0.116255] system 00:02: [io 0x0a78-0x0a7b] has been reserved
324[ 0.116327] system 00:02: [io 0x0e78-0x0e7b] has been reserved
325[ 0.116399] system 00:02: [io 0x0bbc-0x0bbf] has been reserved
326[ 0.116471] system 00:02: [io 0x0fbc-0x0fbf] has been reserved
327[ 0.116542] system 00:02: [io 0x04d0-0x04d1] has been reserved
328[ 0.116614] system 00:02: [io 0x0294-0x0297] has been reserved
329[ 0.116662] system 00:02: [io 0x0480-0x048f] has been reserved
330[ 0.116735] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
331[ 0.116751] pnp 00:03: [dma 4]
332[ 0.116754] pnp 00:03: [io 0x0000-0x000f]
333[ 0.116756] pnp 00:03: [io 0x0080-0x0090]
334[ 0.116758] pnp 00:03: [io 0x0094-0x009f]
335[ 0.116761] pnp 00:03: [io 0x00c0-0x00df]
336[ 0.116810] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
337[ 0.116825] pnp 00:04: [io 0x0070-0x0073]
338[ 0.116843] pnp 00:04: [irq 8]
339[ 0.116891] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
340[ 0.116903] pnp 00:05: [io 0x0061]
341[ 0.116953] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
342[ 0.116965] pnp 00:06: [io 0x00f0-0x00ff]
343[ 0.116977] pnp 00:06: [irq 13]
344[ 0.117026] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
345[ 0.117153] pnp 00:07: [io 0x03f0-0x03f5]
346[ 0.117156] pnp 00:07: [io 0x03f7]
347[ 0.117168] pnp 00:07: [irq 6]
348[ 0.117170] pnp 00:07: [dma 2]
349[ 0.117237] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
350[ 0.117610] pnp 00:08: [io 0x0060]
351[ 0.117612] pnp 00:08: [io 0x0064]
352[ 0.117624] pnp 00:08: [irq 1]
353[ 0.117678] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
354[ 0.117709] pnp: PnP ACPI: found 9 devices
355[ 0.117776] ACPI: ACPI bus type pnp unregistered
356[ 0.152452] Switching to clocksource acpi_pm
357[ 0.152547] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
358[ 0.152660] pci 0000:00:01.0: PCI bridge to [bus 01-01]
359[ 0.152731] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
360[ 0.152806] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
361[ 0.152806] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff pref]
362[ 0.152806] pci 0000:02:08.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
363[ 0.152806] pci 0000:02:0a.0: BAR 6: assigned [mem 0xfde10000-0xfde1ffff pref]
364[ 0.152806] pci 0000:00:02.0: PCI bridge to [bus 02-02]
365[ 0.152806] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
366[ 0.152806] pci 0000:00:02.0: bridge window [mem 0xfdc00000-0xfdcfffff]
367[ 0.152806] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff pref]
368[ 0.152806] pci 0000:00:01.0: setting latency timer to 64
369[ 0.152806] pci 0000:00:02.0: setting latency timer to 64
370[ 0.152806] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
371[ 0.152806] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
372[ 0.152806] pci_bus 0000:00: resource 6 [mem 0x40000000-0xffffffff]
373[ 0.152806] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
374[ 0.152806] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
375[ 0.152806] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff pref]
376[ 0.152806] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
377[ 0.152806] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
378[ 0.152806] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff pref]
379[ 0.152806] NET: Registered protocol family 2
380[ 0.152806] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
381[ 0.152806] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
382[ 0.153115] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
383[ 0.153408] TCP: Hash tables configured (established 131072 bind 65536)
384[ 0.153481] TCP: reno registered
385[ 0.153547] UDP hash table entries: 512 (order: 1, 8192 bytes)
386[ 0.153626] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
387[ 0.153766] NET: Registered protocol family 1
388[ 0.153975] PCI: CLS mismatch (32 != 64), using 64 bytes
389[ 0.153987] pci 0000:01:00.0: Boot video device
390[ 0.154119] Trying to unpack rootfs image as initramfs...
391[ 0.184841] Freeing initrd memory: 1168k freed
392[ 0.186643] highmem bounce pool size: 64 pages
393[ 0.186732] HugeTLB registered 4 MB page size, pre-allocated 0 pages
394[ 0.187136] squashfs: version 4.0 (2009/01/31) Phillip Lougher
395[ 0.187235] NTFS driver 2.1.30 [Flags: R/O].
396[ 0.187371] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, debug enabled
397[ 0.187603] msgmni has been set to 1739
398[ 0.188237] NET: Registered protocol family 38
399[ 0.188341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
400[ 0.188454] io scheduler noop registered
401[ 0.188521] io scheduler deadline registered (default)
402[ 0.188659] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
403[ 0.188729] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
404[ 0.189092] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
405[ 0.189607] lp: driver loaded but no devices found
406[ 0.189769] ppdev: user-space parallel port driver
407[ 0.189838] Linux agpgart interface v0.103
408[ 0.189917] agpgart-ali 0000:00:00.0: unsupported ALi chipset [10b9/1689])
409[ 0.190042] agpgart-amd64 0000:00:00.0: AGP bridge [10b9/1689]
410[ 0.190118] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
411[ 0.190235] agpgart-amd64 0000:00:00.0: setting up ULi AGP
412[ 0.197686] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
413[ 0.201749] radeonfb: Found Intel x86 BIOS ROM Image
414[ 0.201820] radeonfb: Retrieved PLL infos from BIOS
415[ 0.201890] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=500.00 Mhz, System=297.00 MHz
416[ 0.202003] radeonfb: PLL min 20000 max 40000
417[ 0.202136] i2c i2c-0: adapter [radeonfb monid] registered
418[ 0.202194] i2c i2c-1: adapter [radeonfb dvi] registered
419[ 0.202250] i2c i2c-2: adapter [radeonfb vga] registered
420[ 0.202308] i2c i2c-3: adapter [radeonfb crt2] registered
421[ 0.290008] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
422[ 0.290012] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128
423[ 0.291101] i2c i2c-1: NAK from device addr 0x50 msg #0
424[ 0.291134] i2c i2c-1: unable to read EDID block.
425[ 0.433342] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
426[ 0.433345] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128
427[ 0.434433] i2c i2c-1: NAK from device addr 0x50 msg #0
428[ 0.434465] i2c i2c-1: unable to read EDID block.
429[ 0.576675] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
430[ 0.576678] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128
431[ 0.577765] i2c i2c-1: NAK from device addr 0x50 msg #0
432[ 0.577797] i2c i2c-1: unable to read EDID block.
433[ 0.970008] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1
434[ 0.970011] i2c i2c-2: master_xfer[1] R, addr=0x50, len=128
435[ 1.050014] radeonfb: Monitor 1 type CRT found
436[ 1.050081] radeonfb: EDID probed
437[ 1.050146] radeonfb: Monitor 2 type no found
438[ 1.050293] fbcon: ATI Radeon 4152 (fb0) is primary device
439[ 1.311963] Console: switching to colour frame buffer device 160x64
440[ 1.429887] Refined TSC clocksource calibration: 1840.908 MHz.
441[ 1.430887] radeonfb (0000:01:00.0): ATI Radeon 4152 "AR"
442[ 1.431228] uvesafb: failed to execute /sbin/v86d
443[ 1.431328] uvesafb: make sure that the v86d helper is installed and executable
444[ 1.431470] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
445[ 1.431600] uvesafb: vbe_init() failed with -22
446[ 1.431702] uvesafb: probe of uvesafb.0 failed with error -22
447[ 1.431977] vga16fb: initializing
448[ 1.431981] vga16fb: mapped to 0xc00a0000
449[ 1.432138] fb1: VGA16 VGA frame buffer device
450[ 1.432345] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
451[ 1.432501] ACPI: Power Button [PWRB]
452[ 1.432652] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
453[ 1.432795] ACPI: Power Button [PWRF]
454[ 1.432940] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
455[ 1.433083] ACPI: Sleep Button [SLPF]
456[ 1.433238] ACPI: Fan [FAN] (on)
457[ 1.436278] thermal LNXTHERM:00: registered as thermal_zone0
458[ 1.436391] ACPI: Thermal Zone [THRM] (16 C)
459[ 1.436666] [drm] Initialized drm 1.1.0 20060810
460[ 1.436836] [drm] radeon defaulting to userspace modesetting.
461[ 1.437063] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
462[ 1.437194] [drm] No driver support for vblank timestamp query.
463[ 1.437315] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
464[ 1.438592] Floppy drive(s): fd0 is 1.44M
465[ 1.439522] Switching to clocksource tsc
466[ 1.453570] FDC 0 is a post-1991 82077
467[ 1.455991] brd: module loaded
468[ 1.456812] loop: module loaded
469[ 1.456890] 'Low Performance USB Block' driver is deprecated. Please switch to usb-storage
470[ 1.457072] usbcore: registered new interface driver ub
471[ 1.457795] scsi0 : pata_ali
472[ 1.457962] scsi1 : pata_ali
473[ 1.458627] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
474[ 1.458761] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
475[ 1.501075] sundance.c:v1.2 11-Sep-2006 Written by Donald Becker
476[ 1.508457] eth0: IC Plus Corporation IP100A FAST Ethernet Adapter at f8022000, 00:50:8d:7f:ed:2f, IRQ 21.
477[ 1.515881] eth0: MII PHY found at address 0, status 0x7849 advertising 01e1.
478[ 1.831136] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
479[ 1.838194] 8139cp 0000:02:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
480[ 1.845602] 8139too: 8139too Fast Ethernet driver 0.9.28
481[ 1.853255] 8139too 0000:02:08.0: eth1: RealTek RTL8139 at 0xf8024000, 00:50:bf:5c:f8:08, IRQ 19
482[ 1.860583] via_rhine: Broken BIOS detected, avoid_D3 enabled
483[ 1.868228] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
484[ 1.875626] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
485[ 1.875652] ehci_hcd 0000:00:0f.3: EHCI Host Controller
486[ 1.882847] drivers/usb/core/inode.c: creating file 'devices'
487[ 1.882855] drivers/usb/core/inode.c: creating file '001'
488[ 1.882901] ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 1
489[ 1.890125] ehci_hcd 0000:00:0f.3: reset hcs_params 0x103398 dbg=1 cc=3 pcc=3 ports=8
490[ 1.890132] ehci_hcd 0000:00:0f.3: reset portroute 0 0 1 1 1 0 2 2
491[ 1.890136] ehci_hcd 0000:00:0f.3: reset hcc_params 7002 thresh 0 uframes 256/512/1024
492[ 1.890158] ehci_hcd 0000:00:0f.3: debug port 1
493[ 1.897283] ehci_hcd 0000:00:0f.3: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
494[ 1.897287] ehci_hcd 0000:00:0f.3: ...powerup ports...
495[ 1.897466] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
496[ 1.904603] ata1.00: 160086528 sectors, multi 16: LBA
497[ 1.920005] ehci_hcd 0000:00:0f.3: MWI active
498[ 1.920007] ehci_hcd 0000:00:0f.3: supports USB remote wakeup
499[ 1.920026] ehci_hcd 0000:00:0f.3: irq 23, io mem 0xfdffb000
500[ 1.927278] ehci_hcd 0000:00:0f.3: init command 0010005 (park)=0 ithresh=1 period=512 RUN
501[ 1.927560] ata1.00: configured for UDMA/133
502[ 1.934947] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
503[ 1.942417] ehci_hcd 0000:00:0f.3: USB 2.0 started, EHCI 1.00
504[ 1.950158] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
505[ 1.957877] usb usb1: default language 0x0409
506[ 1.957883] usb usb1: udev 1, busnum 1, minor = 0
507[ 1.957886] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
508[ 1.965603] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
509[ 1.973227] usb usb1: Product: EHCI Host Controller
510[ 1.980748] usb usb1: Manufacturer: Linux 3.4.2-gentootiling ehci_hcd
511[ 1.988395] usb usb1: SerialNumber: 0000:00:0f.3
512[ 1.996012] sd 0:0:0:0: Attached scsi generic sg0 type 0
513[ 2.003613] sd 0:0:0:0: [sda] Write Protect is off
514[ 2.011158] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
515[ 2.011366] usb usb1: usb_probe_device
516[ 2.011370] usb usb1: configuration #1 chosen from 1 choice
517[ 2.011379] usb usb1: adding 1-0:1.0 (config #1, interface 0)
518[ 2.011419] hub 1-0:1.0: usb_probe_interface
519[ 2.011422] hub 1-0:1.0: usb_probe_interface - got id
520[ 2.011425] hub 1-0:1.0: USB hub found
521[ 2.018980] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
522[ 2.026660] hub 1-0:1.0: 8 ports detected
523[ 2.034605] hub 1-0:1.0: standalone hub
524[ 2.034607] hub 1-0:1.0: individual port power switching
525[ 2.034609] hub 1-0:1.0: individual port over-current protection
526[ 2.034612] hub 1-0:1.0: power on to power good time: 20ms
527[ 2.034617] hub 1-0:1.0: local power source is good
528[ 2.034619] hub 1-0:1.0: enabling power on all ports
529[ 2.034658] drivers/usb/core/inode.c: creating file '001'
530[ 2.034704] ehci_hcd 0000:02:06.3: EHCI Host Controller
531[ 2.042436] drivers/usb/core/inode.c: creating file '002'
532[ 2.042480] ehci_hcd 0000:02:06.3: new USB bus registered, assigned bus number 2
533[ 2.050292] ehci_hcd 0000:02:06.3: reset hcs_params 0x103216 dbg=1 cc=3 pcc=2 ordered ports=6
534[ 2.050297] ehci_hcd 0000:02:06.3: reset hcc_params 7002 thresh 0 uframes 256/512/1024
535[ 2.050320] ehci_hcd 0000:02:06.3: debug port 1
536[ 2.058068] ehci_hcd 0000:02:06.3: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
537[ 2.058073] ehci_hcd 0000:02:06.3: ...powerup ports...
538[ 2.080008] ehci_hcd 0000:02:06.3: MWI active
539[ 2.080010] ehci_hcd 0000:02:06.3: supports USB remote wakeup
540[ 2.080029] ehci_hcd 0000:02:06.3: irq 17, io mem 0xfdcfc000
541[ 2.087810] ehci_hcd 0000:02:06.3: init command 0010005 (park)=0 ithresh=1 period=512 RUN
542[ 2.096673] ehci_hcd 0000:02:06.3: USB 2.0 started, EHCI 1.00
543[ 2.104404] usb usb2: default language 0x0409
544[ 2.104411] usb usb2: udev 1, busnum 2, minor = 128
545[ 2.104413] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
546[ 2.112147] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
547[ 2.119834] usb usb2: Product: EHCI Host Controller
548[ 2.127471] usb usb2: Manufacturer: Linux 3.4.2-gentootiling ehci_hcd
549[ 2.135107] usb usb2: SerialNumber: 0000:02:06.3
550[ 2.142736] ehci_hcd 0000:00:0f.3: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT
551[ 2.142740] hub 1-0:1.0: port 1: status 0501 change 0001
552[ 2.142819] usb usb2: usb_probe_device
553[ 2.142823] usb usb2: configuration #1 chosen from 1 choice
554[ 2.142829] usb usb2: adding 2-0:1.0 (config #1, interface 0)
555[ 2.142871] hub 2-0:1.0: usb_probe_interface
556[ 2.142873] hub 2-0:1.0: usb_probe_interface - got id
557[ 2.142875] hub 2-0:1.0: USB hub found
558[ 2.150499] hub 2-0:1.0: 6 ports detected
559[ 2.158051] hub 2-0:1.0: standalone hub
560[ 2.158053] hub 2-0:1.0: individual port power switching
561[ 2.158055] hub 2-0:1.0: individual port over-current protection
562[ 2.158057] hub 2-0:1.0: power on to power good time: 20ms
563[ 2.158061] hub 2-0:1.0: local power source is good
564[ 2.158063] hub 2-0:1.0: enabling power on all ports
565[ 2.158093] drivers/usb/core/inode.c: creating file '001'
566[ 2.158135] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
567[ 2.165738] ohci_hcd: block sizes: ed 64 td 64
568[ 2.176773] ohci_hcd 0000:00:0f.0: OHCI Host Controller
569[ 2.184627] ata2.01: ATAPI: SAMSUNG CD-R/RW DRIVE SW-252F, R802, max UDMA/33
570[ 2.192298] ata2.01: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled
571[ 2.200042] ata2.01: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
572[ 2.208000] drivers/usb/core/inode.c: creating file '003'
573[ 2.208050] ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 3
574[ 2.215916] ohci_hcd 0000:00:0f.0: created debug files
575[ 2.215918] ohci_hcd 0000:00:0f.0: supports USB remote wakeup
576[ 2.215934] ohci_hcd 0000:00:0f.0: irq 20, io mem 0xfdffe000
577[ 2.230170] ata2.01: configured for UDMA/33
578[ 2.239344] scsi 1:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-252F R802 PQ: 0 ANSI: 5
579[ 2.247308] hub 1-0:1.0: state 7 ports 8 chg 0002 evt 0000
580[ 2.247314] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
581[ 2.247322] ehci_hcd 0000:00:0f.3: port 1 low speed --> companion
582[ 2.249720] sr0: scsi3-mmc drive: 52x/1x writer cd/rw xa/form2 cdda tray
583[ 2.257801] cdrom: Uniform CD-ROM driver Revision: 3.20
584[ 2.265975] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
585[ 2.274143] sr 1:0:1:0: Attached scsi CD-ROM sr0
586[ 2.274307] sr 1:0:1:0: Attached scsi generic sg1 type 5
587[ 2.284338] ohci_hcd 0000:00:0f.0: OHCI controller state
588[ 2.284341] ohci_hcd 0000:00:0f.0: OHCI 1.0, NO legacy support registers, rh state running
589[ 2.284345] ohci_hcd 0000:00:0f.0: control 0x083 HCFS=operational CBSR=3
590[ 2.284349] ohci_hcd 0000:00:0f.0: cmdstatus 0x00000 SOC=0
591[ 2.284352] ohci_hcd 0000:00:0f.0: intrstatus 0x00000044 RHSC SF
592[ 2.284356] ohci_hcd 0000:00:0f.0: intrenable 0x8000000a MIE RD WDH
593[ 2.284360] ohci_hcd 0000:00:0f.0: hcca frame #0003
594[ 2.284364] ohci_hcd 0000:00:0f.0: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
595[ 2.284367] ohci_hcd 0000:00:0f.0: roothub.b 00000000 PPCM=0000 DR=0000
596[ 2.284371] ohci_hcd 0000:00:0f.0: roothub.status 00008000 DRWE
597[ 2.284375] ohci_hcd 0000:00:0f.0: roothub.portstatus [0] 0x00010301 CSC LSDA PPS CCS
598[ 2.284379] ohci_hcd 0000:00:0f.0: roothub.portstatus [1] 0x00000100 PPS
599[ 2.284383] ohci_hcd 0000:00:0f.0: roothub.portstatus [2] 0x00000100 PPS
600[ 2.284394] usb usb3: default language 0x0409
601[ 2.284400] usb usb3: udev 1, busnum 3, minor = 256
602[ 2.284402] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
603[ 2.292487] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
604[ 2.300641] usb usb3: Product: OHCI Host Controller
605[ 2.308689] usb usb3: Manufacturer: Linux 3.4.2-gentootiling ohci_hcd
606[ 2.316801] usb usb3: SerialNumber: 0000:00:0f.0
607[ 2.324850] ehci_hcd 0000:00:0f.3: GetStatus port:1 status 003402 0 ACK POWER OWNER sig=k CSC
608[ 2.324862] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
609[ 2.324866] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
610[ 2.325379] sd 0:0:0:0: [sda] Attached SCSI disk
611[ 2.333416] usb usb3: usb_probe_device
612[ 2.333420] usb usb3: configuration #1 chosen from 1 choice
613[ 2.333427] usb usb3: adding 3-0:1.0 (config #1, interface 0)
614[ 2.333466] hub 3-0:1.0: usb_probe_interface
615[ 2.333469] hub 3-0:1.0: usb_probe_interface - got id
616[ 2.333472] hub 3-0:1.0: USB hub found
617[ 2.341294] hub 3-0:1.0: 3 ports detected
618[ 2.349030] hub 3-0:1.0: standalone hub
619[ 2.349033] hub 3-0:1.0: no power switching (usb 1.0)
620[ 2.349035] hub 3-0:1.0: global over-current protection
621[ 2.349037] hub 3-0:1.0: power on to power good time: 2ms
622[ 2.349042] hub 3-0:1.0: local power source is good
623[ 2.349044] hub 3-0:1.0: no over-current condition exists
624[ 2.349047] hub 3-0:1.0: trying to enable port power on non-switchable hub
625[ 2.349066] drivers/usb/core/inode.c: creating file '001'
626[ 2.349114] ohci_hcd 0000:00:0f.1: OHCI Host Controller
627[ 2.356759] drivers/usb/core/inode.c: creating file '004'
628[ 2.356801] ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 4
629[ 2.364413] ohci_hcd 0000:00:0f.1: created debug files
630[ 2.364415] ohci_hcd 0000:00:0f.1: supports USB remote wakeup
631[ 2.364435] ohci_hcd 0000:00:0f.1: irq 21, io mem 0xfdffd000
632[ 2.423341] ohci_hcd 0000:00:0f.1: enabling initreset quirk
633[ 2.425348] ohci_hcd 0000:00:0f.1: OHCI controller state
634[ 2.425351] ohci_hcd 0000:00:0f.1: OHCI 1.0, NO legacy support registers, rh state running
635[ 2.425355] ohci_hcd 0000:00:0f.1: control 0x083 HCFS=operational CBSR=3
636[ 2.425358] ohci_hcd 0000:00:0f.1: cmdstatus 0x00000 SOC=0
637[ 2.425362] ohci_hcd 0000:00:0f.1: intrstatus 0x00000004 SF
638[ 2.425365] ohci_hcd 0000:00:0f.1: intrenable 0x8000004a MIE RHSC RD WDH
639[ 2.425369] ohci_hcd 0000:00:0f.1: hcca frame #0003
640[ 2.425373] ohci_hcd 0000:00:0f.1: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
641[ 2.425376] ohci_hcd 0000:00:0f.1: roothub.b 00000000 PPCM=0000 DR=0000
642[ 2.425380] ohci_hcd 0000:00:0f.1: roothub.status 00008000 DRWE
643[ 2.425383] ohci_hcd 0000:00:0f.1: roothub.portstatus [0] 0x00000100 PPS
644[ 2.425387] ohci_hcd 0000:00:0f.1: roothub.portstatus [1] 0x00000100 PPS
645[ 2.425391] ohci_hcd 0000:00:0f.1: roothub.portstatus [2] 0x00000100 PPS
646[ 2.425401] usb usb4: default language 0x0409
647[ 2.425407] usb usb4: udev 1, busnum 4, minor = 384
648[ 2.425410] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
649[ 2.432923] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
650[ 2.440370] usb usb4: Product: OHCI Host Controller
651[ 2.447769] usb usb4: Manufacturer: Linux 3.4.2-gentootiling ohci_hcd
652[ 2.455163] usb usb4: SerialNumber: 0000:00:0f.1
653[ 2.462510] ohci_hcd 0000:00:0f.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
654[ 2.462514] hub 3-0:1.0: port 1: status 0301 change 0001
655[ 2.462591] usb usb4: usb_probe_device
656[ 2.462594] usb usb4: configuration #1 chosen from 1 choice
657[ 2.462600] usb usb4: adding 4-0:1.0 (config #1, interface 0)
658[ 2.462638] hub 4-0:1.0: usb_probe_interface
659[ 2.462641] hub 4-0:1.0: usb_probe_interface - got id
660[ 2.462643] hub 4-0:1.0: USB hub found
661[ 2.469955] hub 4-0:1.0: 3 ports detected
662[ 2.477212] hub 4-0:1.0: standalone hub
663[ 2.477214] hub 4-0:1.0: no power switching (usb 1.0)
664[ 2.477216] hub 4-0:1.0: global over-current protection
665[ 2.477219] hub 4-0:1.0: power on to power good time: 2ms
666[ 2.477223] hub 4-0:1.0: local power source is good
667[ 2.477225] hub 4-0:1.0: no over-current condition exists
668[ 2.477227] hub 4-0:1.0: trying to enable port power on non-switchable hub
669[ 2.477245] drivers/usb/core/inode.c: creating file '001'
670[ 2.477279] ohci_hcd 0000:00:0f.2: OHCI Host Controller
671[ 2.484536] drivers/usb/core/inode.c: creating file '005'
672[ 2.484577] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 5
673[ 2.491912] ohci_hcd 0000:00:0f.2: created debug files
674[ 2.491914] ohci_hcd 0000:00:0f.2: supports USB remote wakeup
675[ 2.491929] ohci_hcd 0000:00:0f.2: irq 22, io mem 0xfdffc000
676[ 2.550006] ohci_hcd 0000:00:0f.2: enabling initreset quirk
677[ 2.552014] ohci_hcd 0000:00:0f.2: OHCI controller state
678[ 2.552017] ohci_hcd 0000:00:0f.2: OHCI 1.0, NO legacy support registers, rh state running
679[ 2.552020] ohci_hcd 0000:00:0f.2: control 0x083 HCFS=operational CBSR=3
680[ 2.552024] ohci_hcd 0000:00:0f.2: cmdstatus 0x00000 SOC=0
681[ 2.552027] ohci_hcd 0000:00:0f.2: intrstatus 0x00000004 SF
682[ 2.552030] ohci_hcd 0000:00:0f.2: intrenable 0x8000004a MIE RHSC RD WDH
683[ 2.552034] ohci_hcd 0000:00:0f.2: hcca frame #0003
684[ 2.552038] ohci_hcd 0000:00:0f.2: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
685[ 2.552041] ohci_hcd 0000:00:0f.2: roothub.b 00000000 PPCM=0000 DR=0000
686[ 2.552045] ohci_hcd 0000:00:0f.2: roothub.status 00008000 DRWE
687[ 2.552049] ohci_hcd 0000:00:0f.2: roothub.portstatus [0] 0x00000100 PPS
688[ 2.552052] ohci_hcd 0000:00:0f.2: roothub.portstatus [1] 0x00000100 PPS
689[ 2.552056] ohci_hcd 0000:00:0f.2: roothub.portstatus [2] 0x00000100 PPS
690[ 2.552064] usb usb5: default language 0x0409
691[ 2.552069] usb usb5: udev 1, busnum 5, minor = 512
692[ 2.552072] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
693[ 2.559225] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
694[ 2.566298] usb usb5: Product: OHCI Host Controller
695[ 2.573296] usb usb5: Manufacturer: Linux 3.4.2-gentootiling ohci_hcd
696[ 2.580357] usb usb5: SerialNumber: 0000:00:0f.2
697[ 2.587382] hub 3-0:1.0: state 7 ports 3 chg 0002 evt 0000
698[ 2.587386] hub 3-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
699[ 2.587456] usb usb5: usb_probe_device
700[ 2.587459] usb usb5: configuration #1 chosen from 1 choice
701[ 2.587465] usb usb5: adding 5-0:1.0 (config #1, interface 0)
702[ 2.587504] hub 5-0:1.0: usb_probe_interface
703[ 2.587507] hub 5-0:1.0: usb_probe_interface - got id
704[ 2.587509] hub 5-0:1.0: USB hub found
705[ 2.594521] hub 5-0:1.0: 3 ports detected
706[ 2.601503] hub 5-0:1.0: standalone hub
707[ 2.601505] hub 5-0:1.0: no power switching (usb 1.0)
708[ 2.601507] hub 5-0:1.0: global over-current protection
709[ 2.601510] hub 5-0:1.0: power on to power good time: 2ms
710[ 2.601514] hub 5-0:1.0: local power source is good
711[ 2.601516] hub 5-0:1.0: no over-current condition exists
712[ 2.601518] hub 5-0:1.0: trying to enable port power on non-switchable hub
713[ 2.601538] drivers/usb/core/inode.c: creating file '001'
714[ 2.601573] ohci_hcd 0000:02:06.0: OHCI Host Controller
715[ 2.608580] drivers/usb/core/inode.c: creating file '006'
716[ 2.608623] ohci_hcd 0000:02:06.0: new USB bus registered, assigned bus number 6
717[ 2.615681] ohci_hcd 0000:02:06.0: created debug files
718[ 2.615683] ohci_hcd 0000:02:06.0: supports USB remote wakeup
719[ 2.615698] ohci_hcd 0000:02:06.0: irq 18, io mem 0xfdcff000
720[ 2.653340] ohci_hcd 0000:00:0f.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
721[ 2.673341] ohci_hcd 0000:02:06.0: enabling initreset quirk
722[ 2.675354] ohci_hcd 0000:02:06.0: OHCI controller state
723[ 2.675358] ohci_hcd 0000:02:06.0: OHCI 1.0, NO legacy support registers, rh state running
724[ 2.675362] ohci_hcd 0000:02:06.0: control 0x083 HCFS=operational CBSR=3
725[ 2.675365] ohci_hcd 0000:02:06.0: cmdstatus 0x00000 SOC=0
726[ 2.675368] ohci_hcd 0000:02:06.0: intrstatus 0x00000004 SF
727[ 2.675372] ohci_hcd 0000:02:06.0: intrenable 0x8000004a MIE RHSC RD WDH
728[ 2.675377] ohci_hcd 0000:02:06.0: hcca frame #0003
729[ 2.675381] ohci_hcd 0000:02:06.0: roothub.a 01000202 POTPGT=1 NPS NDP=2(2)
730[ 2.675385] ohci_hcd 0000:02:06.0: roothub.b 00000000 PPCM=0000 DR=0000
731[ 2.675389] ohci_hcd 0000:02:06.0: roothub.status 00008000 DRWE
732[ 2.675393] ohci_hcd 0000:02:06.0: roothub.portstatus [0] 0x00000100 PPS
733[ 2.675397] ohci_hcd 0000:02:06.0: roothub.portstatus [1] 0x00000100 PPS
734[ 2.675404] usb usb6: default language 0x0409
735[ 2.675409] usb usb6: udev 1, busnum 6, minor = 640
736[ 2.675412] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
737[ 2.682400] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
738[ 2.689246] usb usb6: Product: OHCI Host Controller
739[ 2.696064] usb usb6: Manufacturer: Linux 3.4.2-gentootiling ohci_hcd
740[ 2.702880] usb usb6: SerialNumber: 0000:02:06.0
741[ 2.709646] usb 3-1: new low-speed USB device number 2 using ohci_hcd
742[ 2.716522] usb usb6: usb_probe_device
743[ 2.716524] usb usb6: configuration #1 chosen from 1 choice
744[ 2.716531] usb usb6: adding 6-0:1.0 (config #1, interface 0)
745[ 2.716570] hub 6-0:1.0: usb_probe_interface
746[ 2.716572] hub 6-0:1.0: usb_probe_interface - got id
747[ 2.716575] hub 6-0:1.0: USB hub found
748[ 2.723460] hub 6-0:1.0: 2 ports detected
749[ 2.730268] hub 6-0:1.0: standalone hub
750[ 2.730270] hub 6-0:1.0: no power switching (usb 1.0)
751[ 2.730272] hub 6-0:1.0: global over-current protection
752[ 2.730275] hub 6-0:1.0: power on to power good time: 2ms
753[ 2.730279] hub 6-0:1.0: local power source is good
754[ 2.730281] hub 6-0:1.0: no over-current condition exists
755[ 2.730283] hub 6-0:1.0: trying to enable port power on non-switchable hub
756[ 2.730303] drivers/usb/core/inode.c: creating file '001'
757[ 2.730337] ohci_hcd 0000:02:06.1: OHCI Host Controller
758[ 2.737184] drivers/usb/core/inode.c: creating file '007'
759[ 2.737231] ohci_hcd 0000:02:06.1: new USB bus registered, assigned bus number 7
760[ 2.744151] ohci_hcd 0000:02:06.1: created debug files
761[ 2.744153] ohci_hcd 0000:02:06.1: supports USB remote wakeup
762[ 2.744168] ohci_hcd 0000:02:06.1: irq 19, io mem 0xfdcfe000
763[ 2.796673] ohci_hcd 0000:00:0f.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
764[ 2.803341] ohci_hcd 0000:02:06.1: enabling initreset quirk
765[ 2.805354] ohci_hcd 0000:02:06.1: OHCI controller state
766[ 2.805357] ohci_hcd 0000:02:06.1: OHCI 1.0, NO legacy support registers, rh state running
767[ 2.805361] ohci_hcd 0000:02:06.1: control 0x083 HCFS=operational CBSR=3
768[ 2.805365] ohci_hcd 0000:02:06.1: cmdstatus 0x00000 SOC=0
769[ 2.805368] ohci_hcd 0000:02:06.1: intrstatus 0x00000004 SF
770[ 2.805372] ohci_hcd 0000:02:06.1: intrenable 0x8000004a MIE RHSC RD WDH
771[ 2.805377] ohci_hcd 0000:02:06.1: hcca frame #0003
772[ 2.805381] ohci_hcd 0000:02:06.1: roothub.a 01000202 POTPGT=1 NPS NDP=2(2)
773[ 2.805385] ohci_hcd 0000:02:06.1: roothub.b 00000000 PPCM=0000 DR=0000
774[ 2.805388] ohci_hcd 0000:02:06.1: roothub.status 00008000 DRWE
775[ 2.805392] ohci_hcd 0000:02:06.1: roothub.portstatus [0] 0x00000100 PPS
776[ 2.805397] ohci_hcd 0000:02:06.1: roothub.portstatus [1] 0x00000100 PPS
777[ 2.805403] usb usb7: default language 0x0409
778[ 2.805409] usb usb7: udev 1, busnum 7, minor = 768
779[ 2.805412] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
780[ 2.812366] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
781[ 2.819310] usb usb7: Product: OHCI Host Controller
782[ 2.826280] usb usb7: Manufacturer: Linux 3.4.2-gentootiling ohci_hcd
783[ 2.833258] usb usb7: SerialNumber: 0000:02:06.1
784[ 2.840289] usb usb7: usb_probe_device
785[ 2.840292] usb usb7: configuration #1 chosen from 1 choice
786[ 2.840299] usb usb7: adding 7-0:1.0 (config #1, interface 0)
787[ 2.840338] hub 7-0:1.0: usb_probe_interface
788[ 2.840341] hub 7-0:1.0: usb_probe_interface - got id
789[ 2.840343] hub 7-0:1.0: USB hub found
790[ 2.847269] hub 7-0:1.0: 2 ports detected
791[ 2.854073] hub 7-0:1.0: standalone hub
792[ 2.854075] hub 7-0:1.0: no power switching (usb 1.0)
793[ 2.854077] hub 7-0:1.0: global over-current protection
794[ 2.854080] hub 7-0:1.0: power on to power good time: 2ms
795[ 2.854084] hub 7-0:1.0: local power source is good
796[ 2.854086] hub 7-0:1.0: no over-current condition exists
797[ 2.854088] hub 7-0:1.0: trying to enable port power on non-switchable hub
798[ 2.854108] drivers/usb/core/inode.c: creating file '001'
799[ 2.854145] ohci_hcd 0000:02:06.2: OHCI Host Controller
800[ 2.860923] drivers/usb/core/inode.c: creating file '008'
801[ 2.860965] ohci_hcd 0000:02:06.2: new USB bus registered, assigned bus number 8
802[ 2.867718] ohci_hcd 0000:02:06.2: created debug files
803[ 2.867720] ohci_hcd 0000:02:06.2: supports USB remote wakeup
804[ 2.867726] ohci_hcd 0000:02:06.2: irq 20, io mem 0xfdcfd000
805[ 2.887237] usb 3-1: skipped 1 descriptor after interface
806[ 2.890236] usb 3-1: default language 0x0409
807[ 2.898235] usb 3-1: udev 2, busnum 3, minor = 257
808[ 2.898237] usb 3-1: New USB device found, idVendor=1d57, idProduct=0005
809[ 2.904993] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
810[ 2.911627] usb 3-1: Product: HID-compliant Mouse
811[ 2.918145] usb 3-1: Manufacturer: HID-compliant Mouse
812[ 2.924636] usb 3-1: usb_probe_device
813[ 2.924639] usb 3-1: configuration #1 chosen from 1 choice
814[ 2.926232] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
815[ 2.926285] drivers/usb/core/inode.c: creating file '002'
816[ 2.926304] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0002
817[ 2.926308] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0000
818[ 2.926311] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000
819[ 2.926315] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
820[ 2.926675] ohci_hcd 0000:02:06.2: enabling initreset quirk
821[ 2.928689] ohci_hcd 0000:02:06.2: OHCI controller state
822[ 2.928692] ohci_hcd 0000:02:06.2: OHCI 1.0, NO legacy support registers, rh state running
823[ 2.928696] ohci_hcd 0000:02:06.2: control 0x083 HCFS=operational CBSR=3
824[ 2.928700] ohci_hcd 0000:02:06.2: cmdstatus 0x00000 SOC=0
825[ 2.928703] ohci_hcd 0000:02:06.2: intrstatus 0x00000004 SF
826[ 2.928707] ohci_hcd 0000:02:06.2: intrenable 0x8000004a MIE RHSC RD WDH
827[ 2.928712] ohci_hcd 0000:02:06.2: hcca frame #0003
828[ 2.928716] ohci_hcd 0000:02:06.2: roothub.a 01000202 POTPGT=1 NPS NDP=2(2)
829[ 2.928720] ohci_hcd 0000:02:06.2: roothub.b 00000000 PPCM=0000 DR=0000
830[ 2.928724] ohci_hcd 0000:02:06.2: roothub.status 00008000 DRWE
831[ 2.928728] ohci_hcd 0000:02:06.2: roothub.portstatus [0] 0x00000100 PPS
832[ 2.928732] ohci_hcd 0000:02:06.2: roothub.portstatus [1] 0x00000100 PPS
833[ 2.928741] usb usb8: default language 0x0409
834[ 2.928747] usb usb8: udev 1, busnum 8, minor = 896
835[ 2.928749] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
836[ 2.935262] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
837[ 2.941706] usb usb8: Product: OHCI Host Controller
838[ 2.948058] usb usb8: Manufacturer: Linux 3.4.2-gentootiling ohci_hcd
839[ 2.954450] usb usb8: SerialNumber: 0000:02:06.2
840[ 2.960812] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
841[ 2.960876] usb usb8: usb_probe_device
842[ 2.960879] usb usb8: configuration #1 chosen from 1 choice
843[ 2.960885] usb usb8: adding 8-0:1.0 (config #1, interface 0)
844[ 2.960924] hub 8-0:1.0: usb_probe_interface
845[ 2.960926] hub 8-0:1.0: usb_probe_interface - got id
846[ 2.960928] hub 8-0:1.0: USB hub found
847[ 2.967263] hub 8-0:1.0: 2 ports detected
848[ 2.973549] hub 8-0:1.0: standalone hub
849[ 2.973551] hub 8-0:1.0: no power switching (usb 1.0)
850[ 2.973553] hub 8-0:1.0: global over-current protection
851[ 2.973555] hub 8-0:1.0: power on to power good time: 2ms
852[ 2.973560] hub 8-0:1.0: local power source is good
853[ 2.973562] hub 8-0:1.0: no over-current condition exists
854[ 2.973565] hub 8-0:1.0: trying to enable port power on non-switchable hub
855[ 2.973584] drivers/usb/core/inode.c: creating file '001'
856[ 2.973629] uhci_hcd: USB Universal Host Controller Interface driver
857[ 2.980068] usbcore: registered new interface driver usblp
858[ 2.986444] usbcore: registered new interface driver cdc_wdm
859[ 2.992767] Initializing USB Mass Storage driver...
860[ 2.999145] usbcore: registered new interface driver usb-storage
861[ 3.005475] USB Mass Storage support registered.
862[ 3.011835] usbcore: registered new interface driver libusual
863[ 3.018210] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
864[ 3.024580] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
865[ 3.031603] serio: i8042 KBD port at 0x60,0x64 irq 1
866[ 3.038303] mousedev: PS/2 mouse device common for all mice
867[ 3.045115] rtc_cmos 00:04: RTC can wake from S4
868[ 3.051822] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
869[ 3.058542] rtc0: alarms up to one month, 242 bytes nvram
870[ 3.065303] i2c-core: driver [smbus_alert] registered
871[ 3.065306] i2c /dev entries driver
872[ 3.072036] i2c-dev: adapter [radeonfb monid] registered as minor 0
873[ 3.072076] i2c-dev: adapter [radeonfb dvi] registered as minor 1
874[ 3.072116] i2c-dev: adapter [radeonfb vga] registered as minor 2
875[ 3.072160] i2c-dev: adapter [radeonfb crt2] registered as minor 3
876[ 3.072212] ali1535_smbus 0000:00:03.1: enabling device (0000 -> 0001)
877[ 3.078936] ali1535_smbus 0000:00:03.1: ALI1535_smb is at offset 0x0000
878[ 3.078938] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS?
879[ 3.085672] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted.
880[ 3.092458] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
881[ 3.092500] ali1563_smbus 0000:00:03.0: Found ALi1563 SMBus at 0x5000
882[ 3.099307] i2c-dev: adapter [SMBus ALi 1563 Adapter @ 5000] registered as minor 4
883[ 3.099330] i2c i2c-4: adapter [SMBus ALi 1563 Adapter @ 5000] registered
884[ 3.099365] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
885[ 3.106265] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted.
886[ 3.113295] i2c-core: driver [pca9541] registered
887[ 3.113320] i2c-core: driver [pca954x] registered
888[ 3.113411] i2c-core: driver [lm63] registered
889[ 3.113415] i2c i2c-0: found normal entry for adapter 0, addr 0x18
890[ 3.113420] i2c i2c-0: master_xfer[0] W, addr=0x18, len=0
891[ 3.114510] i2c i2c-0: NAK from device addr 0x18 msg #0
892[ 3.114543] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
893[ 3.114546] i2c i2c-0: master_xfer[0] W, addr=0x4c, len=0
894[ 3.114821] i2c i2c-0: master_xfer[0] W, addr=0x4c, len=1
895[ 3.114824] i2c i2c-0: master_xfer[1] R, addr=0x4c, len=1
896[ 3.115797] i2c i2c-0: master_xfer[0] W, addr=0x4c, len=1
897[ 3.115800] i2c i2c-0: master_xfer[1] R, addr=0x4c, len=1
898[ 3.116778] i2c i2c-0: master_xfer[0] W, addr=0x4c, len=1
899[ 3.116780] i2c i2c-0: master_xfer[1] R, addr=0x4c, len=1
900[ 3.117814] i2c i2c-0: master_xfer[0] W, addr=0x4c, len=1
901[ 3.117817] i2c i2c-0: master_xfer[1] R, addr=0x4c, len=1
902[ 3.118789] i2c i2c-0: master_xfer[0] W, addr=0x4c, len=1
903[ 3.118792] i2c i2c-0: master_xfer[1] R, addr=0x4c, len=1
904[ 3.119765] i2c i2c-0: master_xfer[0] W, addr=0x4c, len=1
905[ 3.119768] i2c i2c-0: master_xfer[1] R, addr=0x4c, len=1
906[ 3.120742] i2c i2c-0: Creating lm63 at 0x4c
907[ 3.120758] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
908[ 3.127815] i2c 0-004c: uevent
909[ 3.127835] lm63 0-004c: probe
910[ 3.127839] i2c i2c-0: master_xfer[0] W, addr=0x4c, len=1
911[ 3.127842] i2c i2c-0: master_xfer[1] R, addr=0x4c, len=1
912[ 3.128815] i2c i2c-0: master_xfer[0] W, addr=0x4c, len=1
913[ 3.128818] i2c i2c-0: master_xfer[1] R, addr=0x4c, len=1
914[ 3.129791] i2c i2c-0: master_xfer[0] W, addr=0x4c, len=1
915[ 3.129794] i2c i2c-0: master_xfer[1] R, addr=0x4c, len=1
916[ 3.130768] i2c i2c-0: master_xfer[0] W, addr=0x4c, len=1
917[ 3.130770] i2c i2c-0: master_xfer[1] R, addr=0x4c, len=1
918[ 3.131782] lm63 0-004c: Alert/tach pin configured for alert output
919[ 3.131785] lm63 0-004c: PWM clock 360 kHz, output frequency 7826 Hz
920[ 3.131788] lm63 0-004c: PWM output active high, manual mode
921[ 3.131856] i2c i2c-0: client [lm63] registered with bus id 0-004c
922[ 3.131859] i2c i2c-0: found normal entry for adapter 0, addr 0x4e
923[ 3.131863] i2c i2c-0: master_xfer[0] W, addr=0x4e, len=0
924[ 3.132956] i2c i2c-0: NAK from device addr 0x4e msg #0
925[ 3.132989] i2c i2c-4: found normal entry for adapter 4, addr 0x18
926[ 3.133007] i2c i2c-4: Transaction (pre): STS=00, CNTL1=07, CNTL2=00, CMD=02, ADD=30, DAT0=0e, DAT1=5f
927[ 3.136682] i2c i2c-4: Transaction (post): STS=44, CNTL1=07, CNTL2=00, CMD=02, ADD=30, DAT0=0e, DAT1=5f
928[ 3.136685] i2c i2c-4: found normal entry for adapter 4, addr 0x4c
929[ 3.136702] i2c i2c-4: Transaction (pre): STS=00, CNTL1=07, CNTL2=00, CMD=02, ADD=98, DAT0=0e, DAT1=5f
930[ 3.143346] i2c i2c-4: Transaction (post): STS=44, CNTL1=07, CNTL2=00, CMD=02, ADD=98, DAT0=0e, DAT1=5f
931[ 3.143350] i2c i2c-4: found normal entry for adapter 4, addr 0x4e
932[ 3.143367] i2c i2c-4: Transaction (pre): STS=00, CNTL1=07, CNTL2=00, CMD=02, ADD=9c, DAT0=0e, DAT1=5f
933[ 3.150013] i2c i2c-4: Transaction (post): STS=44, CNTL1=07, CNTL2=00, CMD=02, ADD=9c, DAT0=0e, DAT1=5f
934[ 3.150085] w83627ehf: Found W83627EHG chip at 0x290
935[ 3.157187] ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region \IP__ 1 (20120320/utaddress-251)
936[ 3.164527] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
937[ 3.171843] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
938[ 3.179175] alim7101_wdt: ALi 1543 South-Bridge not present - WDT not set
939[ 3.186576] EISA: Probing bus 0 at eisa.0
940[ 3.193994] EISA: Cannot allocate resource for mainboard
941[ 3.201448] cpuidle: using governor ladder
942[ 3.208883] cpuidle: using governor menu
943[ 3.216581] usbhid 3-1:1.0: usb_probe_interface
944[ 3.216584] usbhid 3-1:1.0: usb_probe_interface - got id
945[ 3.222759] input: HID-compliant Mouse HID-compliant Mouse as /devices/pci0000:00/0000:00:0f.0/usb3/3-1/3-1:1.0/input/input4
946[ 3.230437] generic-usb 0003:1D57:0005.0001: input,hidraw0: USB HID v1.10 Mouse [HID-compliant Mouse HID-compliant Mouse] on usb-0000:00:0f.0-1/input0
947[ 3.238082] usbcore: registered new interface driver usbhid
948[ 3.245815] usbhid: USB HID core driver
949[ 4.266669] AC'97 1 does not respond - RESET
950[ 4.274767] AC'97 1 access is not valid [0xffffffff], removing mixer.
951[ 4.282420] Unable to initialize codec #1
952[ 4.343342] intel8x0_measure_ac97_clock: measured 52856 usecs (2552 samples)
953[ 4.351091] intel8x0: clocking to 48000
954[ 4.359608] oprofile: using NMI interrupt.
955[ 4.367398] TCP: cubic registered
956[ 4.375040] NET: Registered protocol family 17
957[ 4.382714] lib80211: common routines for IEEE802.11 drivers
958[ 4.390436] lib80211_crypt: registered algorithm 'NULL'
959[ 4.390438] Registering the dns_resolver key type
960[ 4.398183] Using IPI Shortcut mode
961[ 4.406237] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ (1 cpu cores) (version 2.20.00)
962[ 4.414087] powernow-k8: fid 0xa (1800 MHz), vid 0x6
963[ 4.421887] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
964[ 4.429715] ALSA device list:
965[ 4.437446] #0: ALi M5455 with ALC658D at irq 18
966[ 4.445308] Freeing unused kernel memory: 444k freed
967[ 4.482577] XFS (sda8): Mounting Filesystem
968[ 4.649081] XFS (sda8): Ending clean mount
969[ 4.708525] XFS (sda9): Mounting Filesystem
970[ 5.058978] XFS (sda9): Ending clean mount
971[ 9.053868] udevd[1070]: starting version 182
972[ 9.147613] lm63 0-004c: uevent
973[ 9.357323] lm63 0-004c: uevent
974[ 9.357389] lm63 0-004c: uevent
975[ 9.357437] lm63 0-004c: uevent
976[ 15.705302] EXT2-fs (sda6): warning: mounting unchecked fs, running e2fsck is recommended
977[ 15.709645] EXT2-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended
978[ 15.857360] Adding 2047996k swap on /dev/sda5. Priority:-1 extents:1 across:2047996k
979[ 17.359980] Marking TSC unstable due to cpufreq changes
980[ 17.360863] Switching to clocksource acpi_pm
981[ 19.064804] 8139too 0000:02:08.0: eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
982[ 41.515282] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
983[ 41.515305] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
984[ 41.515336] radeonfb 0000:01:00.0: putting AGP V3 device into 8x mode
985[ 41.779733] [drm] Setting GART location based on new memory map
986[ 41.786449] [drm] Loading R300 Microcode
987[ 41.786729] [drm] Num pipes: 1
988[ 41.786740] [drm] writeback test succeeded in 1 usecs
989[ 549.974559] [drm] Num pipes: 1
990[ 550.104854] mtrr: no MTRR for e0000000,8000000 found
991[ 550.105042] X:1845 freeing invalid memtype c0102000-c0112000
992[ 550.105063] X:1845 freeing invalid memtype c0112000-c0122000
993[ 550.105082] X:1845 freeing invalid memtype c0122000-c0132000
994[ 550.105100] X:1845 freeing invalid memtype c0132000-c0142000
995[ 550.105118] X:1845 freeing invalid memtype c0142000-c0152000
996[ 550.105136] X:1845 freeing invalid memtype c0152000-c0162000
997[ 550.105153] X:1845 freeing invalid memtype c0162000-c0172000
998[ 550.105171] X:1845 freeing invalid memtype c0172000-c0182000
999[ 550.105189] X:1845 freeing invalid memtype c0182000-c0192000
1000[ 550.105206] X:1845 freeing invalid memtype c0192000-c01a2000
1001[ 550.105224] X:1845 freeing invalid memtype c01a2000-c01b2000
1002[ 550.105241] X:1845 freeing invalid memtype c01b2000-c01c2000
1003[ 550.105259] X:1845 freeing invalid memtype c01c2000-c01d2000
1004[ 550.105277] X:1845 freeing invalid memtype c01d2000-c01e2000
1005[ 550.105294] X:1845 freeing invalid memtype c01e2000-c01f2000
1006[ 550.105312] X:1845 freeing invalid memtype c01f2000-c0202000
1007[ 550.105330] X:1845 freeing invalid memtype c0202000-c0212000
1008[ 550.105347] X:1845 freeing invalid memtype c0212000-c0222000
1009[ 550.105365] X:1845 freeing invalid memtype c0222000-c0232000
1010[ 550.105383] X:1845 freeing invalid memtype c0232000-c0242000
1011[ 550.105400] X:1845 freeing invalid memtype c0242000-c0252000
1012[ 550.105418] X:1845 freeing invalid memtype c0252000-c0262000
1013[ 550.105435] X:1845 freeing invalid memtype c0262000-c0272000
1014[ 550.105453] X:1845 freeing invalid memtype c0272000-c0282000
1015[ 550.105471] X:1845 freeing invalid memtype c0282000-c0292000
1016[ 550.105488] X:1845 freeing invalid memtype c0292000-c02a2000
1017[ 550.105506] X:1845 freeing invalid memtype c02a2000-c02b2000
1018[ 550.105524] X:1845 freeing invalid memtype c02b2000-c02c2000
1019[ 550.105541] X:1845 freeing invalid memtype c02c2000-c02d2000
1020[ 550.105559] X:1845 freeing invalid memtype c02d2000-c02e2000
1021[ 550.105577] X:1845 freeing invalid memtype c02e2000-c02f2000
1022[ 550.105594] X:1845 freeing invalid memtype c02f2000-c0302000
1023[ 591.651535] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
1024[ 591.651560] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
1025[ 591.651591] radeonfb 0000:01:00.0: putting AGP V3 device into 8x mode
1026[ 591.893029] [drm] Setting GART location based on new memory map
1027[ 591.898378] [drm] Loading R300 Microcode
1028[ 591.898644] [drm] Num pipes: 1
1029[ 591.898654] [drm] writeback test succeeded in 1 usecs
1030[ 7226.741527] [drm] Num pipes: 1
1031[ 7226.871459] mtrr: no MTRR for e0000000,8000000 found
1032[ 7226.871645] X:2336 freeing invalid memtype c0102000-c0112000
1033[ 7226.871666] X:2336 freeing invalid memtype c0112000-c0122000
1034[ 7226.871684] X:2336 freeing invalid memtype c0122000-c0132000
1035[ 7226.871702] X:2336 freeing invalid memtype c0132000-c0142000
1036[ 7226.871720] X:2336 freeing invalid memtype c0142000-c0152000
1037[ 7226.871738] X:2336 freeing invalid memtype c0152000-c0162000
1038[ 7226.871756] X:2336 freeing invalid memtype c0162000-c0172000
1039[ 7226.871774] X:2336 freeing invalid memtype c0172000-c0182000
1040[ 7226.871791] X:2336 freeing invalid memtype c0182000-c0192000
1041[ 7226.871809] X:2336 freeing invalid memtype c0192000-c01a2000
1042[ 7226.871827] X:2336 freeing invalid memtype c01a2000-c01b2000
1043[ 7226.871845] X:2336 freeing invalid memtype c01b2000-c01c2000
1044[ 7226.871862] X:2336 freeing invalid memtype c01c2000-c01d2000
1045[ 7226.871880] X:2336 freeing invalid memtype c01d2000-c01e2000
1046[ 7226.871898] X:2336 freeing invalid memtype c01e2000-c01f2000
1047[ 7226.871916] X:2336 freeing invalid memtype c01f2000-c0202000
1048[ 7226.871933] X:2336 freeing invalid memtype c0202000-c0212000
1049[ 7226.871951] X:2336 freeing invalid memtype c0212000-c0222000
1050[ 7226.871969] X:2336 freeing invalid memtype c0222000-c0232000
1051[ 7226.871987] X:2336 freeing invalid memtype c0232000-c0242000
1052[ 7226.872004] X:2336 freeing invalid memtype c0242000-c0252000
1053[ 7226.872022] X:2336 freeing invalid memtype c0252000-c0262000
1054[ 7226.872040] X:2336 freeing invalid memtype c0262000-c0272000
1055[ 7226.872058] X:2336 freeing invalid memtype c0272000-c0282000
1056[ 7226.872075] X:2336 freeing invalid memtype c0282000-c0292000
1057[ 7226.872093] X:2336 freeing invalid memtype c0292000-c02a2000
1058[ 7226.872111] X:2336 freeing invalid memtype c02a2000-c02b2000
1059[ 7226.872129] X:2336 freeing invalid memtype c02b2000-c02c2000
1060[ 7226.872147] X:2336 freeing invalid memtype c02c2000-c02d2000
1061[ 7226.872165] X:2336 freeing invalid memtype c02d2000-c02e2000
1062[ 7226.872183] X:2336 freeing invalid memtype c02e2000-c02f2000
1063[ 7226.872200] X:2336 freeing invalid memtype c02f2000-c0302000
1064[ 7233.569404] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
1065[ 7233.569428] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
1066[ 7233.569459] radeonfb 0000:01:00.0: putting AGP V3 device into 8x mode
1067[ 7233.811172] [drm] Setting GART location based on new memory map
1068[ 7233.816568] [drm] Loading R300 Microcode
1069[ 7233.816833] [drm] Num pipes: 1
1070[ 7233.816844] [drm] writeback test succeeded in 1 usecs
1071[ 7976.631656] [drm] Num pipes: 1
1072[ 7976.762081] mtrr: no MTRR for e0000000,8000000 found
1073[ 7976.762268] X:13101 freeing invalid memtype c0102000-c0112000
1074[ 7976.762290] X:13101 freeing invalid memtype c0112000-c0122000
1075[ 7976.762309] X:13101 freeing invalid memtype c0122000-c0132000
1076[ 7976.762328] X:13101 freeing invalid memtype c0132000-c0142000
1077[ 7976.762346] X:13101 freeing invalid memtype c0142000-c0152000
1078[ 7976.762365] X:13101 freeing invalid memtype c0152000-c0162000
1079[ 7976.762383] X:13101 freeing invalid memtype c0162000-c0172000
1080[ 7976.762402] X:13101 freeing invalid memtype c0172000-c0182000
1081[ 7976.762420] X:13101 freeing invalid memtype c0182000-c0192000
1082[ 7976.762438] X:13101 freeing invalid memtype c0192000-c01a2000
1083[ 7976.762456] X:13101 freeing invalid memtype c01a2000-c01b2000
1084[ 7976.762475] X:13101 freeing invalid memtype c01b2000-c01c2000
1085[ 7976.762493] X:13101 freeing invalid memtype c01c2000-c01d2000
1086[ 7976.762511] X:13101 freeing invalid memtype c01d2000-c01e2000
1087[ 7976.762530] X:13101 freeing invalid memtype c01e2000-c01f2000
1088[ 7976.763261] X:13101 freeing invalid memtype c01f2000-c0202000
1089[ 7976.763280] X:13101 freeing invalid memtype c0202000-c0212000
1090[ 7976.763298] X:13101 freeing invalid memtype c0212000-c0222000
1091[ 7976.763316] X:13101 freeing invalid memtype c0222000-c0232000
1092[ 7976.763334] X:13101 freeing invalid memtype c0232000-c0242000
1093[ 7976.763351] X:13101 freeing invalid memtype c0242000-c0252000
1094[ 7976.763369] X:13101 freeing invalid memtype c0252000-c0262000
1095[ 7976.763387] X:13101 freeing invalid memtype c0262000-c0272000
1096[ 7976.763405] X:13101 freeing invalid memtype c0272000-c0282000
1097[ 7976.763423] X:13101 freeing invalid memtype c0282000-c0292000
1098[ 7976.763440] X:13101 freeing invalid memtype c0292000-c02a2000
1099[ 7976.763458] X:13101 freeing invalid memtype c02a2000-c02b2000
1100[ 7976.763476] X:13101 freeing invalid memtype c02b2000-c02c2000
1101[ 7976.763494] X:13101 freeing invalid memtype c02c2000-c02d2000
1102[ 7976.763512] X:13101 freeing invalid memtype c02d2000-c02e2000
1103[ 7976.763530] X:13101 freeing invalid memtype c02e2000-c02f2000
1104[ 7976.763547] X:13101 freeing invalid memtype c02f2000-c0302000
1105[ 8678.035186] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
1106[ 8678.035210] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
1107[ 8678.035242] radeonfb 0000:01:00.0: putting AGP V3 device into 8x mode
1108[ 8678.276877] [drm] Setting GART location based on new memory map
1109[ 8678.282250] [drm] Loading R300 Microcode
1110[ 8678.282528] [drm] Num pipes: 1
1111[ 8678.282539] [drm] writeback test succeeded in 1 usecs