· 6 years ago · Oct 14, 2019, 04:12 AM
1<6>[ 0.000000] Initializing cgroup subsys cpuset
2<6>[ 0.000000] Initializing cgroup subsys cpu
3<6>[ 0.000000] Initializing cgroup subsys cpuacct
4<5>[ 0.000000] Linux version 3.18.31-perf-ge7a81de (builder@c3-miui-ota-bd96.bj) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Nov 30 11:14:00 CST 2017
5<4>[ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
6<6>[ 0.000000] alternatives: enabling workaround for ARM erratum 845719
7<6>[ 0.000000] Powerup reason=0x800a1
8<6>[ 0.000000] Machine: Qualcomm Technologies, Inc. MSM8953 QRD SKU3_E7
9<6>[ 0.000000] efi: Getting EFI parameters from FDT:
10<6>[ 0.000000] efi: UEFI not found.
11<6>[ 0.000000] Reserved memory: reserved region for node 'other_ext_region@0': base 0x0000000084a00000, size 30 MiB
12<6>[ 0.000000] Reserved memory: reserved region for node 'modem_region@0': base 0x0000000086c00000, size 106 MiB
13<6>[ 0.000000] Reserved memory: reserved region for node 'adsp_fw_region@0': base 0x000000008d600000, size 18 MiB
14<6>[ 0.000000] Reserved memory: reserved region for node 'wcnss_fw_region@0': base 0x000000008e800000, size 7 MiB
15<6>[ 0.000000] Reserved memory: reserved region for node 'dfps_data_mem@90000000': base 0x0000000090000000, size 0 MiB
16<6>[ 0.000000] Reserved memory: reserved region for node 'splash_region@0x90001000': base 0x0000000090001000, size 19 MiB
17<6>[ 0.000000] Reserved memory: reserved region for node 'pstore_reserve_mem_region@0': base 0x000000009ff00000, size 1 MiB
18<6>[ 0.000000] Removed memory: created DMA memory pool at 0x0000000084a00000, size 30 MiB
19<6>[ 0.000000] Reserved memory: initialized node other_ext_region@0, compatible id removed-dma-pool
20<6>[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086c00000, size 106 MiB
21<6>[ 0.000000] Reserved memory: initialized node modem_region@0, compatible id removed-dma-pool
22<6>[ 0.000000] Removed memory: created DMA memory pool at 0x000000008d600000, size 18 MiB
23<6>[ 0.000000] Reserved memory: initialized node adsp_fw_region@0, compatible id removed-dma-pool
24<6>[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e800000, size 7 MiB
25<6>[ 0.000000] Reserved memory: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
26<6>[ 0.000000] Reserved memory: allocated memory for 'venus_region@0' node: base 0x000000008f800000, size 8 MiB
27<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB
28<6>[ 0.000000] Reserved memory: initialized node venus_region@0, compatible id shared-dma-pool
29<6>[ 0.000000] Reserved memory: allocated memory for 'secure_region@0' node: base 0x00000000f6800000, size 152 MiB
30<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f6800000, size 152 MiB
31<6>[ 0.000000] Reserved memory: initialized node secure_region@0, compatible id shared-dma-pool
32<6>[ 0.000000] Reserved memory: allocated memory for 'qseecom_region@0' node: base 0x00000000f5800000, size 16 MiB
33<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5800000, size 16 MiB
34<6>[ 0.000000] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool
35<6>[ 0.000000] Reserved memory: allocated memory for 'adsp_region@0' node: base 0x00000000f5400000, size 4 MiB
36<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5400000, size 4 MiB
37<6>[ 0.000000] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool
38<6>[ 0.000000] Reserved memory: allocated memory for 'gpu_region@0' node: base 0x000000008f000000, size 8 MiB
39<6>[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f000000, size 8 MiB
40<6>[ 0.000000] Reserved memory: initialized node gpu_region@0, compatible id shared-dma-pool
41<6>[ 0.000000] cma: Reserved 16 MiB at 0x00000000f4400000
42<7>[ 0.000000] On node 0 totalpages: 968960
43<7>[ 0.000000] DMA zone: 15360 pages used for memmap
44<7>[ 0.000000] DMA zone: 0 pages reserved
45<7>[ 0.000000] DMA zone: 968960 pages, LIFO batch:31
46<6>[ 0.000000] psci: probing for conduit method from DT.
47<6>[ 0.000000] psci: PSCIv1.0 detected in firmware.
48<6>[ 0.000000] psci: Using standard PSCI v0.2 function IDs
49<6>[ 0.000000] psci: Initializing psci_cpu_init
50<6>[ 0.000000] psci: Initializing psci_cpu_init
51<6>[ 0.000000] psci: Initializing psci_cpu_init
52<6>[ 0.000000] psci: Initializing psci_cpu_init
53<6>[ 0.000000] psci: Initializing psci_cpu_init
54<6>[ 0.000000] psci: Initializing psci_cpu_init
55<6>[ 0.000000] psci: Initializing psci_cpu_init
56<6>[ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc0e4182000 s21504 r8192 d31744 u61440
57<7>[ 0.000000] pcpu-alloc: s21504 r8192 d31744 u61440 alloc=15*4096
58<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
59<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 953600
60<5>[ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci buildvariant=eng androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=3571620b0904 android.mmcphase=9 androidboot.boot_reason= androidboot.secureboot=1 androidboot.product.region=cn gpt androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_td4310_fhdplus_video_e7:wpoint=00:1:none:cfg:single_dsi
61<4>[ 0.000000] zakk: booting_into_recovery=0
62<6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
63<6>[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
64<6>[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
65<4>[ 0.000000] Memory: 3422852K/3875840K available (13728K kernel code, 2625K rwdata, 7384K rodata, 856K init, 4865K bss, 452988K reserved)
66<5>[ 0.000000] Virtual kernel memory layout:
67<5>[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
68<5>[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
69<5>[ 0.000000] 0xffffffbdc0400000 - 0xffffffbdc4000000 ( 60 MB actual)
70<5>[ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
71<5>[ 0.000000] fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
72<5>[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
73<5>[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0f0000000 ( 3840 MB)
74<5>[ 0.000000] .init : 0xffffffc001521000 - 0xffffffc0015f7000 ( 856 KB)
75<5>[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc001520244 ( 21121 KB)
76<5>[ 0.000000] .data : 0xffffffc001613000 - 0xffffffc0018a3400 ( 2625 KB)
77<6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
78<6>[ 0.000000] HMP scheduling enabled.
79<6>[ 0.000000] Preemptible hierarchical RCU implementation.
80<6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
81<6>[ 0.000000] NR_IRQS:64 nr_irqs:64 0
82<4>[ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
83<3>[ 0.000000] MPM 1 irq mapping errored -517
84<6>[ 0.000000] Offload RCU callbacks from all CPUs
85<6>[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
86<6>[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
87<6>[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
88<6>[ 0.000024] Switched to clocksource arch_sys_counter
89<6>[ 0.004602] allocated 16777216 bytes of page_cgroup
90<6>[ 0.004614] please try 'cgroup_disable=memory' option if you don't want memory cgroups
91<6>[ 0.004631] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
92<6>[ 0.004645] pid_max: default: 32768 minimum: 301
93<6>[ 0.004748] Security Framework initialized
94<6>[ 0.004766] SELinux: Initializing.
95<7>[ 0.004815] SELinux: Starting in permissive mode
96<6>[ 0.004890] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
97<6>[ 0.004904] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
98<6>[ 0.005799] Initializing cgroup subsys memory
99<6>[ 0.005826] Initializing cgroup subsys freezer
100<6>[ 0.005862] ftrace: allocating 44361 entries in 174 pages
101<3>[ 0.116874] /cpus/cpu@0: Missing clock-frequency property
102<3>[ 0.116898] /cpus/cpu@1: Missing clock-frequency property
103<3>[ 0.116916] /cpus/cpu@2: Missing clock-frequency property
104<3>[ 0.116937] /cpus/cpu@3: Missing clock-frequency property
105<3>[ 0.116959] /cpus/cpu@100: Missing clock-frequency property
106<3>[ 0.116984] /cpus/cpu@101: Missing clock-frequency property
107<3>[ 0.117010] /cpus/cpu@102: Missing clock-frequency property
108<3>[ 0.117038] /cpus/cpu@103: Missing clock-frequency property
109<6>[ 0.117091] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
110<6>[ 0.117132] EFI services will not be available.
111<4>[ 0.117309] NOHZ: local_softirq_pending 02
112<4>[ 0.120674]
113<4>[ 0.120674] **********************************************************
114<4>[ 0.120686] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
115<4>[ 0.120694] ** **
116<4>[ 0.120701] ** trace_printk() being used. Allocating extra memory. **
117<4>[ 0.120707] ** **
118<4>[ 0.120715] ** This means that this is a DEBUG kernel and it is **
119<4>[ 0.120722] ** unsafe for produciton use. **
120<4>[ 0.120728] ** **
121<4>[ 0.120735] ** If you see this message and you are not debugging **
122<4>[ 0.120742] ** the kernel, report this immediately to your vendor! **
123<4>[ 0.120749] ** **
124<4>[ 0.120756] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
125<4>[ 0.120763] **********************************************************
126<6>[ 0.123846] MSM Memory Dump base table set up
127<6>[ 0.123878] MSM Memory Dump apps data table set up
128<6>[ 0.123952] Configuring XPU violations to be fatal errors
129<6>[ 0.126443] cpu_clock_pwr_init: Power clocks configured
130<6>[ 0.146952] Brought up 8 CPUs
131<6>[ 0.146968] SMP: Total of 8 processors activated.
132<6>[ 0.147053] alternatives: patching kernel code
133<6>[ 0.150991] DMI not present or invalid.
134<6>[ 0.163199] pinctrl core: initialized pinctrl subsystem
135<6>[ 0.163811] regulator-dummy: no parameters
136<6>[ 0.243139] NET: Registered protocol family 16
137<6>[ 0.245515] ramoops: using module parameters
138<6>[ 0.247374] console [pstore0] enabled
139<6>[ 0.247571] pstore: Registered ramoops as persistent store backend
140<6>[ 0.247584] ramoops: attached 0x100000@0x9ff00000, ecc: 0/0
141<4>[ 0.248561] ------------[ cut here ]------------
142<4>[ 0.248581] WARNING: CPU: 2 PID: 1 at /home/work/vince-n-stable-build/kernel/msm-3.18/drivers/power/qcom/pm-boot.c:45 msm_pm_boot_init+0x90/0xd0()
143<4>[ 0.248592] Modules linked in:
144<4>[ 0.248613] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.18.31-perf-ge7a81de #1
145<4>[ 0.248624] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3_E7 (DT)
146<0>[ 0.248635] Call trace:
147<4>[ 0.248652] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c
148<4>[ 0.248667] [<ffffffc00008a294>] show_stack+0x20/0x28
149<4>[ 0.248684] [<ffffffc000dcab98>] dump_stack+0x80/0xa4
150<4>[ 0.248699] [<ffffffc0000a5bc0>] warn_slowpath_common+0x94/0xb8
151<4>[ 0.248712] [<ffffffc0000a5d74>] warn_slowpath_null+0x38/0x44
152<4>[ 0.248726] [<ffffffc001561e5c>] msm_pm_boot_init+0x90/0xd0
153<4>[ 0.248740] [<ffffffc000082b70>] do_one_initcall+0x194/0x1b0
154<4>[ 0.248756] [<ffffffc001521b94>] kernel_init_freeable+0x1d0/0x284
155<4>[ 0.248770] [<ffffffc000dc4538>] kernel_init+0x20/0xdc
156<4>[ 0.248795] ---[ end trace 8a318ef28b54bd31 ]---
157<3>[ 0.248824] scm_call failed: func id 0x42000101, ret: -1, syscall returns: 0x0, 0x0, 0x0
158<6>[ 0.260126] cpuidle: using governor ladder
159<6>[ 0.280120] cpuidle: using governor menu
160<6>[ 0.300118] cpuidle: using governor qcom
161<6>[ 0.301472] vdso: 2 pages (1 code @ ffffffc001619000, 1 data @ ffffffc001618000)
162<6>[ 0.302358] software IO TLB [mem 0xecc00000-0xed000000] (4MB) mapped at [ffffffc0dcc00000-ffffffc0dcffffff]
163<6>[ 0.303517] DMA: preallocated 256 KiB pool for atomic allocations
164<4>[ 0.312198] __of_mpm_init(): MPM driver mapping exists
165<6>[ 0.315373] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0
166<3>[ 0.344697] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
167<6>[ 0.350497] sps:sps is ready.
168<6>[ 0.352962] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
169<3>[ 0.352981] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
170<6>[ 0.353002] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
171<3>[ 0.353018] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
172<6>[ 0.356948] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
173<3>[ 0.357144] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
174<3>[ 0.357162] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
175<6>[ 0.357890] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
176<3>[ 0.358064] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
177<3>[ 0.358080] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
178<6>[ 0.358830] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
179<3>[ 0.359002] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
180<3>[ 0.359019] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
181<6>[ 0.360906] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
182<3>[ 0.361035] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-mx regulator!!!
183<4>[ 0.362445] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
184<6>[ 0.362461] msm_rpm_dev_probe: APSS-RPM communication over SMD
185<3>[ 0.365273] smd_channel_probe_now: allocation table not initialized
186<3>[ 0.366802] smd_channel_probe_now: allocation table not initialized
187<3>[ 0.367997] smd_channel_probe_now: allocation table not initialized
188<6>[ 0.369963] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
189<6>[ 0.370431] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
190<6>[ 0.371969] msm-sn-fuse a4128.snfuse: SN interface initialized
191<6>[ 0.379507] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0
192<3>[ 0.383291] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
193<6>[ 0.387272] pm8953_s5: 400 <--> 1140 mV at 870 mV normal idle
194<6>[ 0.387684] pm8953_s5_avs_limit: 400 <--> 1140 mV
195<6>[ 0.387914] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us
196<6>[ 0.395820] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
197<6>[ 0.396488] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
198<6>[ 0.396864] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
199<6>[ 0.397682] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
200<6>[ 0.400557] apc_mem_acc_corner: 0 <--> 0 mV
201<6>[ 0.401994] cpr4_msm8953_apss_read_fuse_data: apc_corner: speed bin = 2
202<6>[ 0.402010] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR fusing revision = 3
203<6>[ 0.402023] cpr4_msm8953_apss_read_fuse_data: apc_corner: foundry id = 2
204<6>[ 0.402036] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
205<6>[ 0.402076] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
206<6>[ 0.402225] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused LowSVS: open-loop= 625000 uV
207<6>[ 0.402237] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 680000 uV
208<6>[ 0.402249] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 815000 uV
209<6>[ 0.402261] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV
210<6>[ 0.402341] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused LowSVS: quot[ 7]= 459
211<6>[ 0.402355] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 544, quot_offset[ 7]= 80
212<6>[ 0.402368] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 814, quot_offset[ 7]= 270
213<6>[ 0.402382] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1005, quot_offset[ 7]= 190
214<6>[ 0.402736] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = 2, aging RO scale = 2800 QUOT/V
215<6>[ 0.402942] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop
216<6>[ 0.403132] apc_corner: 0 <--> 0 mV at 0 mV
217<6>[ 0.404674] gfx_mem_acc_corner: 0 <--> 0 mV
218<3>[ 0.405335] GFX_LDO: msm_gfx_ldo_parse_dt: Unable to parse CX parameters rc=-517
219<3>[ 0.405349] GFX_LDO: msm_gfx_ldo_probe: Unable to pasrse dt rc=-517
220<3>[ 0.425393] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
221<6>[ 0.426336] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
222<6>[ 0.426502] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
223<3>[ 0.426515] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
224<6>[ 0.426536] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
225<3>[ 0.426552] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
226<6>[ 0.426932] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
227<3>[ 0.427134] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
228<3>[ 0.427151] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
229<6>[ 0.427524] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
230<3>[ 0.427697] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
231<3>[ 0.427713] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
232<6>[ 0.428086] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
233<3>[ 0.428257] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
234<3>[ 0.428274] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
235<6>[ 0.428644] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
236<3>[ 0.428759] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-mx regulator!!!
237<4>[ 0.428854] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
238<6>[ 0.428867] msm_rpm_dev_probe: APSS-RPM communication over SMD
239<6>[ 0.429753] pm8953_s1: 870 <--> 1156 mV at 1000 mV normal idle
240<6>[ 0.430781] pm8953_s2_level: 0 <--> 0 mV at 0 mV normal idle
241<6>[ 0.431427] pm8953_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle
242<6>[ 0.432101] pm8953_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle
243<6>[ 0.432960] pm8953_s3: 1225 mV normal idle
244<6>[ 0.433866] pm8953_s4: 1900 <--> 2050 mV at 1900 mV normal idle
245<6>[ 0.434737] pm8953_s7_level: 0 <--> 0 mV at 0 mV normal idle
246<6>[ 0.435400] pm8953_s7_level_ao: 0 <--> 0 mV at 0 mV normal idle
247<6>[ 0.436040] pm8953_s7_level_so: 0 <--> 0 mV at 0 mV normal idle
248<6>[ 0.436938] pm8953_l1: 1000 mV normal idle
249<6>[ 0.437811] pm8953_l2: 1200 <--> 1225 mV at 1200 mV normal idle
250<6>[ 0.438705] pm8953_l3: 925 mV normal idle
251<6>[ 0.439575] pm8953_l5: 1800 mV normal idle
252<6>[ 0.440507] pm8953_l6: 1800 mV normal idle
253<6>[ 0.441376] pm8953_l7: 1800 <--> 1900 mV at 1800 mV normal idle
254<6>[ 0.442035] pm8953_l7_ao: 1800 <--> 1900 mV at 1800 mV normal idle
255<6>[ 0.442916] pm8953_l8: 2900 mV normal idle
256<6>[ 0.443812] pm8953_l9: 3000 <--> 3300 mV at 3000 mV normal idle
257<6>[ 0.444684] pm8953_l10: 2850 mV normal idle
258<6>[ 0.445583] pm8953_l11: 2950 mV normal idle
259<6>[ 0.446455] pm8953_l12: 1800 <--> 2950 mV at 1800 mV normal idle
260<6>[ 0.447351] pm8953_l13: 3125 mV normal idle
261<6>[ 0.448226] pm8953_l16: 1800 mV normal idle
262<6>[ 0.449126] pm8953_l17: 2750 <--> 2850 mV at 2800 mV normal idle
263<6>[ 0.449991] pm8953_l19: 1200 <--> 1350 mV at 1200 mV normal idle
264<6>[ 0.450917] pm8953_l22: 2800 mV normal idle
265<6>[ 0.451797] pm8953_l23: 1200 <--> 1225 mV at 120 mV normal idle
266<6>[ 0.452797] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV
267<6>[ 0.452812] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV
268<6>[ 0.452826] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV
269<6>[ 0.452845] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000
270<6>[ 0.452858] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000
271<6>[ 0.452872] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default
272<6>[ 0.453231] msm_gfx_ldo: 0 <--> 0 mV at 0 mV
273<3>[ 0.453661] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
274<6>[ 0.454636] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
275<3>[ 0.455441] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
276<3>[ 0.455457] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
277<3>[ 0.455472] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
278<3>[ 0.455484] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
279<6>[ 0.455495] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
280<3>[ 0.457880] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
281<3>[ 0.457894] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
282<3>[ 0.457910] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
283<3>[ 0.457922] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
284<3>[ 0.457936] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
285<3>[ 0.457947] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
286<3>[ 0.457961] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
287<3>[ 0.457972] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
288<6>[ 0.458651] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
289<3>[ 0.458858] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
290<3>[ 0.458875] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
291<6>[ 0.459288] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
292<3>[ 0.459463] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
293<3>[ 0.459479] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
294<6>[ 0.459858] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
295<3>[ 0.460065] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517
296<3>[ 0.460081] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517
297<4>[ 0.490240] ------------[ cut here ]------------
298<4>[ 0.490283] WARNING: CPU: 2 PID: 6 at /home/work/vince-n-stable-build/kernel/msm-3.18/drivers/clk/msm/clock-local2.c:1005 branch_clk_handoff+0x7c/0xc0()
299<4>[ 0.490295] gcc_usb_phy_cfg_ahb_clk clock is enabled in HW even though ENABLE_BIT is not set
300<4>[ 0.490305] Modules linked in:
301<4>[ 0.490327] CPU: 2 PID: 6 Comm: kworker/u16:0 Tainted: G W 3.18.31-perf-ge7a81de #1
302<4>[ 0.490338] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3_E7 (DT)
303<4>[ 0.490359] Workqueue: deferwq deferred_probe_work_func
304<0>[ 0.490373] Call trace:
305<4>[ 0.490391] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c
306<4>[ 0.490407] [<ffffffc00008a294>] show_stack+0x20/0x28
307<4>[ 0.490424] [<ffffffc000dcab98>] dump_stack+0x80/0xa4
308<4>[ 0.490438] [<ffffffc0000a5bc0>] warn_slowpath_common+0x94/0xb8
309<4>[ 0.490451] [<ffffffc0000a5c6c>] warn_slowpath_fmt+0x88/0xac
310<4>[ 0.490465] [<ffffffc000a8fcf8>] branch_clk_handoff+0x7c/0xc0
311<4>[ 0.490478] [<ffffffc000a8c1c8>] __handoff_clk+0xd0/0x2e4
312<4>[ 0.490491] [<ffffffc000a8c560>] msm_clock_register+0x184/0x248
313<4>[ 0.490504] [<ffffffc000a8c6b4>] of_msm_clock_register+0x90/0xa0
314<4>[ 0.490520] [<ffffffc000aa0820>] msm_gcc_probe+0x120/0x214
315<4>[ 0.490536] [<ffffffc0005b2138>] platform_drv_probe+0x44/0x90
316<4>[ 0.490550] [<ffffffc0005b01e0>] driver_probe_device+0xe0/0x22c
317<4>[ 0.490564] [<ffffffc0005b0360>] __device_attach+0x34/0x54
318<4>[ 0.490578] [<ffffffc0005ae39c>] bus_for_each_drv+0x98/0xc8
319<4>[ 0.490591] [<ffffffc0005b00a4>] device_attach+0x78/0xa4
320<4>[ 0.490604] [<ffffffc0005af60c>] bus_probe_device+0x38/0xac
321<4>[ 0.490618] [<ffffffc0005afaa0>] deferred_probe_work_func+0x7c/0xa8
322<4>[ 0.490633] [<ffffffc0000bdfe0>] process_one_work+0x264/0x440
323<4>[ 0.490645] [<ffffffc0000bea0c>] worker_thread+0x32c/0x448
324<4>[ 0.490661] [<ffffffc0000c33b8>] kthread+0xf8/0x100
325<4>[ 0.490672] ---[ end trace 8a318ef28b54bd32 ]---
326<6>[ 0.493292] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks
327<6>[ 0.493606] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
328<3>[ 0.496667] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0
329<3>[ 0.496685] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0
330<3>[ 0.496701] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0
331<3>[ 0.496716] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0
332<3>[ 0.496731] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0
333<3>[ 0.496745] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0
334<3>[ 0.496755] ramp_lmh_sid: Use Default LMH SID
335<3>[ 0.496765] ramp_dfs_sid: Use Default DFS SID
336<3>[ 0.496775] ramp_link_sid: Use Default Link SID
337<3>[ 0.496835] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1
338<3>[ 0.496849] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1
339<3>[ 0.496864] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1
340<3>[ 0.496878] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1
341<3>[ 0.496893] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1
342<3>[ 0.496906] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1
343<3>[ 0.496916] ramp_lmh_sid: Use Default LMH SID
344<3>[ 0.496926] ramp_dfs_sid: Use Default DFS SID
345<3>[ 0.496935] ramp_link_sid: Use Default Link SID
346<6>[ 0.497011] clock_rcgwr_init: RCGwR Init Completed
347<6>[ 0.497571] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7)
348<6>[ 0.497585] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1
349<6>[ 0.497596] print_opp_table: clock_cpu: a53 C0: OPP voltage for 2016000000: 7
350<6>[ 0.497607] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1
351<6>[ 0.497617] print_opp_table: clock_cpu: a53 C2: OPP voltage for 2016000000: 7
352<6>[ 0.498898] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
353<3>[ 0.499145] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
354<6>[ 0.499160] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
355<6>[ 0.501436] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
356<3>[ 0.501789] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
357<6>[ 0.501806] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
358<6>[ 0.502128] i2c-msm-v2 78b7000.i2c: irq:176 when no active transfer
359<6>[ 0.505426] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
360<3>[ 0.505805] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
361<6>[ 0.505822] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
362<6>[ 0.508669] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks.
363<3>[ 0.592556] qcom,qpnp-pin qpnp-pin-17: qpnp_pin_probe: no device nodes specified in topology
364<4>[ 0.592590] qcom,qpnp-pin: probe of qpnp-pin-17 failed with error -22
365<3>[ 0.592639] qcom,qpnp-pin qpnp-pin-18: qpnp_pin_probe: no device nodes specified in topology
366<4>[ 0.592659] qcom,qpnp-pin: probe of qpnp-pin-18 failed with error -22
367<3>[ 0.593076] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
368<3>[ 0.593100] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
369<6>[ 0.597023] KPI: Bootloader start count = 49296
370<6>[ 0.597034] KPI: Bootloader end count = 134176
371<6>[ 0.597044] KPI: Bootloader display count = 65539
372<6>[ 0.597053] KPI: Bootloader load kernel count = 7916
373<6>[ 0.597063] KPI: Kernel MPM timestamp = 164852
374<6>[ 0.597071] KPI: Kernel MPM Clock frequency = 32768
375<6>[ 0.597099] socinfo_print: v0.10, id=293, ver=1.1, raw_id=70, raw_ver=1, hw_plat=11, hw_plat_ver=65536
376<6>[ 0.597099] accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=3 serial_number=3807887588
377<6>[ 0.598245] eldo2_8953: no parameters
378<3>[ 0.598585] qpnp_pin_of_gpio_xlate: no such PMIC gpio 5 in device topology
379<6>[ 0.598724] adv_vreg: no parameters
380<6>[ 0.599203] vdd_vreg: no parameters
381<6>[ 0.599773] vgaarb: loaded
382<3>[ 0.599802] pcba config =129.
383<5>[ 0.600943] SCSI subsystem initialized
384<6>[ 0.601862] usbcore: registered new interface driver usbfs
385<6>[ 0.601945] usbcore: registered new interface driver hub
386<6>[ 0.602175] usbcore: registered new device driver usb
387<6>[ 0.602910] media: Linux media interface: v0.10
388<6>[ 0.602980] Linux video capture interface: v2.00
389<6>[ 0.603077] EDAC MC: Ver: 3.0.0
390<6>[ 0.630281] cpufreq: driver msm up and running
391<6>[ 0.630719] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
392<6>[ 0.630915] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
393<6>[ 0.631118] ION heap system created
394<6>[ 0.631207] ION heap mm created at 0x00000000f6800000 with size 9800000
395<6>[ 0.631220] ION heap qsecom created at 0x00000000f5800000 with size 1000000
396<3>[ 0.631505] msm_bus_fabric_init_driver
397<4>[ 0.632380] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048
398<6>[ 0.642178] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
399<6>[ 0.642198] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from KPDPWR_N (Long Power Key hold)
400<6>[ 0.642366] input: qpnp_pon as /devices/virtual/input/input0
401<6>[ 0.643244] pon_spare_reg: no parameters
402<6>[ 0.643329] qcom,qpnp-power-on qpnp-power-on-15: No PON config. specified
403<6>[ 0.643379] qcom,qpnp-power-on qpnp-power-on-15: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
404<6>[ 0.643396] qcom,qpnp-power-on qpnp-power-on-15: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
405<6>[ 0.643582] PMIC@SID0: (null) v1.0 options: 2, 2, 0, 0
406<6>[ 0.643681] PMIC@SID2: PMI8950 v2.0 options: 0, 0, 0, 0
407<3>[ 0.644310] ipa ipa2_uc_state_check:296 uC interface not initialized
408<3>[ 0.644318] ipa ipa_sps_irq_control_all:938 EP (2) not allocated.
409<3>[ 0.644323] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
410<6>[ 0.645675] sps:BAM 0x0000000007904000 is registered.
411<6>[ 0.646115] sps:BAM 0x0000000007904000 (va:0xffffff80017c0000) enabled: ver:0x27, number of pipes:20
412<6>[ 0.649041] IPA driver initialization was successful.
413<6>[ 0.650051] gdsc_venus: no parameters
414<6>[ 0.650322] gdsc_mdss: no parameters
415<6>[ 0.650589] gdsc_jpeg: no parameters
416<6>[ 0.651020] gdsc_vfe: no parameters
417<6>[ 0.651465] gdsc_vfe1: no parameters
418<6>[ 0.651715] gdsc_cpp: no parameters
419<6>[ 0.651931] gdsc_oxili_gx: no parameters
420<6>[ 0.652020] gdsc_oxili_gx: supplied by msm_gfx_ldo
421<6>[ 0.652245] gdsc_venus_core0: fast normal
422<6>[ 0.652460] gdsc_oxili_cx: no parameters
423<6>[ 0.652629] gdsc_usb30: no parameters
424<6>[ 0.653616] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
425<6>[ 0.654321] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
426<6>[ 0.654347] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
427<3>[ 0.655470] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
428<6>[ 0.655943] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
429<6>[ 0.656400] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001d80000, with 21 ctx banks
430<6>[ 0.662375] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context adsp_elf using bank 0
431<6>[ 0.662521] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1
432<6>[ 0.662667] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2
433<6>[ 0.662813] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3
434<6>[ 0.662959] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
435<6>[ 0.663103] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5
436<6>[ 0.663248] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6
437<6>[ 0.663416] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8
438<6>[ 0.663589] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context q6 using bank 9
439<6>[ 0.663761] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10
440<6>[ 0.663930] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11
441<6>[ 0.664099] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15
442<6>[ 0.664273] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16
443<6>[ 0.664446] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17
444<6>[ 0.664615] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18
445<6>[ 0.664783] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19
446<6>[ 0.664951] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20
447<6>[ 0.665121] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21
448<6>[ 0.665292] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22
449<6>[ 0.665462] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context ipa using bank 24
450<6>[ 0.665633] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23
451<3>[ 0.667804] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
452<3>[ 0.667831] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
453<3>[ 0.667853] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
454<6>[ 0.669992] Advanced Linux Sound Architecture Driver Initialized.
455<6>[ 0.670845] Bluetooth: ffffffc07efc7cf8
456<6>[ 0.670869] NET: Registered protocol family 31
457<6>[ 0.670875] Bluetooth: ffffffc07efc7cf8
458<6>[ 0.670885] Bluetooth: ffffffc07efc7cd8Bluetooth: ffffffc07efc7ca8
459<6>[ 0.670918] Bluetooth: ffffffc07efc7cb8<6>[ 0.671239] cfg80211: Calling CRDA to update world regulatory domain
460<6>[ 0.671258] cfg80211: World regulatory domain updated:
461<6>[ 0.671263] cfg80211: DFS Master region: unset
462<6>[ 0.671267] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
463<6>[ 0.671275] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
464<6>[ 0.671281] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
465<6>[ 0.671287] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
466<6>[ 0.671292] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
467<6>[ 0.671299] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
468<6>[ 0.671304] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
469<6>[ 0.671310] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
470<6>[ 0.671315] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
471<1>[ 0.671411] pcie:pcie_init.
472<6>[ 0.672922] ibb_reg: 4600 <--> 6000 mV at 5800 mV
473<6>[ 0.673179] lab_reg: 4600 <--> 6000 mV at 5800 mV
474<6>[ 0.673827] Switched to clocksource arch_sys_counter
475<6>[ 0.710777] bcl_peripheral:bcl_perph_init BCL Initialized
476<6>[ 0.712624] NET: Registered protocol family 2
477<6>[ 0.713014] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
478<6>[ 0.713173] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
479<6>[ 0.713509] TCP: Hash tables configured (established 32768 bind 32768)
480<6>[ 0.713552] TCP: reno registered
481<6>[ 0.713561] UDP hash table entries: 2048 (order: 4, 65536 bytes)
482<6>[ 0.713611] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
483<6>[ 0.713787] NET: Registered protocol family 1
484<7>[ 0.713818] PCI: CLS 0 bytes, default 64
485<6>[ 0.716129] gcc-mdss-8953 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks.
486<6>[ 0.716595] Trying to unpack rootfs image as initramfs...
487<6>[ 0.978929] Freeing initrd memory: 9716K (ffffffc003600000 - ffffffc003f7d000)
488<6>[ 0.983046] futex hash table entries: 2048 (order: 5, 131072 bytes)
489<5>[ 0.983121] Initialise system trusted keyring
490<6>[ 0.983169] audit: initializing netlink subsys (disabled)
491<5>[ 0.983213] audit: type=2000 audit(0.979:1): initialized
492<4>[ 0.983571] vmscan: error setting kswapd cpu affinity mask
493<6>[ 0.987150] zbud: loaded
494<5>[ 0.987433] VFS: Disk quotas dquot_6.5.2
495<4>[ 0.987530] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
496<6>[ 0.988966] fuse init (API version 7.23)
497<7>[ 0.989180] SELinux: Registering netfilter hooks
498<5>[ 0.991115] Key type asymmetric registered
499<5>[ 0.991124] Asymmetric key parser 'x509' registered
500<6>[ 0.991223] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
501<6>[ 0.991232] io scheduler noop registered
502<6>[ 0.991240] io scheduler deadline registered
503<6>[ 0.991377] io scheduler cfq registered (default)
504<3>[ 0.995561] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x2 (ok)
505<3>[ 0.995684] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x0d1300c8 OPER:0x00000010
506<3>[ 0.995715] msm_dba_helper_i2c_read: i2c read failed
507<3>[ 0.995723] adv7533_read: read err: addr 0x39, reg 0x0, size 0x1
508<3>[ 0.995728] adv7533_probe: Failed to read chip rev
509<4>[ 0.995779] adv7533: probe of 2-0039 failed with error -5
510<3>[ 0.996101] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
511<3>[ 0.996111] mdss_mdp_probe+0x228/0x10dc->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
512<3>[ 0.996570] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
513<3>[ 0.997118] No change in context(0==0), skip
514<6>[ 0.997785] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
515<6>[ 0.997802] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
516<6>[ 0.997809] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
517<6>[ 0.997822] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
518<6>[ 0.997836] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
519<3>[ 0.997847] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
520<3>[ 0.997935] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
521<6>[ 0.998200] xlog_status: enable:0, panic:1, dump:2
522<6>[ 0.998859] mdss_mdp_probe: mdss version = 0x10100000, bootloader display is on, num 1, intf_sel=0x00000100
523<3>[ 1.000632] mdss_smmu_util_parse_dt_clock: clocks are not defined
524<6>[ 1.000678] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
525<3>[ 1.000702] mdss_smmu_util_parse_dt_clock: clocks are not defined
526<6>[ 1.000735] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
527<6>[ 1.002657] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
528<3>[ 1.003161] [white point calibration] white_point_num = 0
529<3>[ 1.003169] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_td4310_fhdplus_video_e7:wpoint=00:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_td4310_fhdplus_video_e7
530<6>[ 1.003233] mdss_dsi_panel_init: Panel Name = td4310 fhdplus e7 video mode dsi panel
531<6>[ 1.003388] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_td4310_fhdplus_video_e7" (ffffffc07efc7268)
532<3>[ 1.003408] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
533<3>[ 1.003417] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
534<4>[ 1.003423] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
535<3>[ 1.003563] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM1-command
536<3>[ 1.003572] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM2-command
537<3>[ 1.003580] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM3-command
538<3>[ 1.003589] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM4-command
539<3>[ 1.003598] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM5-command
540<3>[ 1.003606] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM6-command
541<3>[ 1.003615] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM7-command
542<3>[ 1.003624] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-PM8-command
543<6>[ 1.003652] mdss_dsi_parse_panel_features: ulps feature disabled
544<6>[ 1.003660] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
545<6>[ 1.003668] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
546<4>[ 1.003828] 1a94000.qcom,mdss_dsi_ctrl0 supply vdd not found, using dummy regulator
547<3>[ 1.004056] mdss_dsi_parse_ctrl_params:4276 Unable to read qcom,display-id, data=0000000000000000,len=20
548<6>[ 1.004069] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
549<3>[ 1.004121] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
550<3>[ 1.004132] mdss_dsi_retrieve_ctrl_resources+0x178/0x1fc->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
551<6>[ 1.004138] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80017ee000 ctrl_size=400 phy_base=ffffff80017f4400 phy_size=580
552<3>[ 1.004157] init_te_irq:liujia irq = 31
553<6>[ 1.004289] dsi_panel_device_register: Continuous splash enabled
554<6>[ 1.004555] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
555<4>[ 1.004790] mido lite msm_dss_enable_vreg
556<4>[ 1.004790]
557<6>[ 1.005862] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x2
558<6>[ 1.006009] mdss_dsi_status_init: DSI status check interval:1000
559<6>[ 1.006907] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
560<6>[ 1.007443] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
561<6>[ 1.008080] mdss_fb_register: FrameBuffer[0] 1080x2160 registered successfully!
562<6>[ 1.008413] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
563<6>[ 1.008502] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
564<3>[ 1.008578] mdss_mdp_splash_parse_dt: splash mem child node is not present
565<3>[ 1.011120] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
566<3>[ 1.011148] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
567<6>[ 1.014818] In memshare_probe, Memshare probe success
568<5>[ 1.016676] msm_rpm_log_probe: OK
569<6>[ 1.017861] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped.
570<6>[ 1.019703] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
571<6>[ 1.022711] msm_serial_hs module loaded
572<6>[ 1.032191] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0
573<6>[ 1.037993] brd: module loaded
574<6>[ 1.039679] loop: module loaded
575<6>[ 1.039954] zram: Added device: zram0
576<6>[ 1.040405] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
577<4>[ 1.040432] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
578<6>[ 1.040440] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
579<4>[ 1.040447] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
580<4>[ 1.040989] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
581<4>[ 1.042330] i2c-core: driver [tabla-i2c-core] using legacy suspend method
582<4>[ 1.042335] i2c-core: driver [tabla-i2c-core] using legacy resume method
583<4>[ 1.042410] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
584<4>[ 1.042415] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
585<4>[ 1.042491] i2c-core: driver [tasha-i2c-core] using legacy suspend method
586<4>[ 1.042496] i2c-core: driver [tasha-i2c-core] using legacy resume method
587<4>[ 1.043041] nq-nci 5-0028: ese GPIO <OPTIONAL> error getting from OF node
588<3>[ 1.043120] nq-nci 5-0028: nqx_probe: ese gpio not provided
589<3>[ 1.100226] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0xd (ok)
590<3>[ 1.100327] i2c-msm-v2 7af5000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x28 MSTR_STS:0x001121c4 OPER:0x00000090
591<3>[ 1.100366] nq-nci 5-0028: nfcc_hw_check: - i2c_master_send Error
592<3>[ 1.100374] nq-nci 5-0028: nfcc_hw_check: - NFCC HW not available
593<4>[ 1.100446] ------------[ cut here ]------------
594<4>[ 1.100457] WARNING: CPU: 5 PID: 1 at /home/work/vince-n-stable-build/kernel/msm-3.18/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x3c/0x60()
595<4>[ 1.100461] invalid GPIO -22
596<4>[ 1.100466] Modules linked in:
597<4>[ 1.100476] CPU: 5 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-perf-ge7a81de #1
598<4>[ 1.100482] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3_E7 (DT)
599<0>[ 1.100487] Call trace:
600<4>[ 1.100496] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c
601<4>[ 1.100502] [<ffffffc00008a294>] show_stack+0x20/0x28
602<4>[ 1.100511] [<ffffffc000dcab98>] dump_stack+0x80/0xa4
603<4>[ 1.100518] [<ffffffc0000a5bc0>] warn_slowpath_common+0x94/0xb8
604<4>[ 1.100523] [<ffffffc0000a5c6c>] warn_slowpath_fmt+0x88/0xac
605<4>[ 1.100530] [<ffffffc0003b2560>] gpio_to_desc+0x3c/0x60
606<4>[ 1.100536] [<ffffffc0003b4a08>] gpio_free+0x20/0x30
607<4>[ 1.100544] [<ffffffc0006084f4>] nqx_probe+0x898/0x940
608<4>[ 1.100553] [<ffffffc0007e6c58>] i2c_device_probe+0xc4/0xf8
609<4>[ 1.100560] [<ffffffc0005b01e0>] driver_probe_device+0xe0/0x22c
610<4>[ 1.100566] [<ffffffc0005b03f4>] __driver_attach+0x74/0xa0
611<4>[ 1.100573] [<ffffffc0005af1e0>] bus_for_each_dev+0x9c/0xcc
612<4>[ 1.100579] [<ffffffc0005afc3c>] driver_attach+0x2c/0x34
613<4>[ 1.100584] [<ffffffc0005af8ac>] bus_add_driver+0x104/0x1d4
614<4>[ 1.100591] [<ffffffc0005b0e78>] driver_register+0x9c/0xe8
615<4>[ 1.100597] [<ffffffc0007e60b4>] i2c_register_driver+0x58/0xb8
616<4>[ 1.100603] [<ffffffc0015599ec>] nqx_dev_init+0x18/0x20
617<4>[ 1.100609] [<ffffffc000082b70>] do_one_initcall+0x194/0x1b0
618<4>[ 1.100617] [<ffffffc001521b94>] kernel_init_freeable+0x1d0/0x284
619<4>[ 1.100623] [<ffffffc000dc4538>] kernel_init+0x20/0xdc
620<4>[ 1.100628] ---[ end trace 8a318ef28b54bd33 ]---
621<3>[ 1.100641] nq-nci 5-0028: nqx_probe: probing nqxx failed, check hardware
622<6>[ 1.100954] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
623<6>[ 1.101486] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000
624<6>[ 1.101495] qce 720000.qcedev: CE device = 0x0
625<6>[ 1.101495] , IO base, CE = 0xffffff8001fc0000
626<6>[ 1.101495] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
627<6>[ 1.101495] IO base BAM = 0x (null)
628<6>[ 1.101495] BAM IRQ 194
629<6>[ 1.101495] Engines Availability = 0x2010853
630<6>[ 1.101694] sps:BAM 0x0000000000704000 is registered.
631<6>[ 1.101853] sps:BAM 0x0000000000704000 (va:0xffffff80020c0000) enabled: ver:0x27, number of pipes:8
632<6>[ 1.102059] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 194
633<6>[ 1.105188] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
634<6>[ 1.105980] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000
635<6>[ 1.105989] qcrypto 720000.qcrypto: CE device = 0x0
636<6>[ 1.105989] , IO base, CE = 0xffffff8002100000
637<6>[ 1.105989] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
638<6>[ 1.105989] IO base BAM = 0x (null)
639<6>[ 1.105989] BAM IRQ 194
640<6>[ 1.105989] Engines Availability = 0x2010853
641<6>[ 1.106250] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 194
642<6>[ 1.108695] qcrypto 720000.qcrypto: qcrypto-ecb-aes
643<6>[ 1.108775] qcrypto 720000.qcrypto: qcrypto-cbc-aes
644<6>[ 1.108855] qcrypto 720000.qcrypto: qcrypto-ctr-aes
645<6>[ 1.108933] qcrypto 720000.qcrypto: qcrypto-ecb-des
646<6>[ 1.109012] qcrypto 720000.qcrypto: qcrypto-cbc-des
647<6>[ 1.109090] qcrypto 720000.qcrypto: qcrypto-ecb-3des
648<6>[ 1.109169] qcrypto 720000.qcrypto: qcrypto-cbc-3des
649<6>[ 1.109247] qcrypto 720000.qcrypto: qcrypto-xts-aes
650<6>[ 1.109325] qcrypto 720000.qcrypto: qcrypto-sha1
651<6>[ 1.109408] qcrypto 720000.qcrypto: qcrypto-sha256
652<6>[ 1.109487] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
653<6>[ 1.109567] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
654<6>[ 1.109645] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
655<6>[ 1.109724] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
656<6>[ 1.109804] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
657<6>[ 1.109882] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
658<6>[ 1.109962] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
659<6>[ 1.110062] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
660<6>[ 1.110149] qcrypto 720000.qcrypto: qcrypto-aes-ccm
661<6>[ 1.110228] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
662<3>[ 1.111212] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
663<6>[ 1.111341] ICE IRQ = 195
664<6>[ 1.112213] SCSI Media Changer driver v0.25
665<3>[ 1.114577] sps: BAM device 0x0000000007ac4000 is not registered yet.
666<6>[ 1.114764] sps:BAM 0x0000000007ac4000 is registered.
667<6>[ 1.115406] sps:BAM 0x0000000007ac4000 (va:0xffffff8001de0000) enabled: ver:0x19, number of pipes:12
668<6>[ 1.116420] tun: Universal TUN/TAP device driver, 1.6
669<6>[ 1.116426] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
670<6>[ 1.116488] PPP generic driver version 2.4.2
671<6>[ 1.116576] PPP BSD Compression module registered
672<6>[ 1.116585] PPP Deflate Compression module registered
673<6>[ 1.116608] PPP MPPE Compression module registered
674<6>[ 1.116621] NET: Registered protocol family 24
675<6>[ 1.117419] wcnss_wlan probed in built-in mode
676<6>[ 1.118177] usbcore: registered new interface driver asix
677<6>[ 1.118246] usbcore: registered new interface driver ax88179_178a
678<6>[ 1.118281] usbcore: registered new interface driver cdc_ether
679<6>[ 1.118318] usbcore: registered new interface driver net1080
680<6>[ 1.118353] usbcore: registered new interface driver cdc_subset
681<6>[ 1.118386] usbcore: registered new interface driver zaurus
682<6>[ 1.118528] usbcore: registered new interface driver cdc_ncm
683<6>[ 1.118913] msm_sharedmem: sharedmem_register_qmi: qmi init successful
684<3>[ 1.119691] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
685<6>[ 1.119698] hyp_assign_table: Failed to assign memory protection, ret = -5
686<3>[ 1.119706] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f4900000 size=1572864 err=-5
687<6>[ 1.119799] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
688<3>[ 1.125272] msm-dwc3 7000000.ssusb: unable to get dbm device
689<6>[ 1.126630] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
690<6>[ 1.126912] ehci-pci: EHCI PCI platform driver
691<6>[ 1.126953] ehci-msm: Qualcomm On-Chip EHCI Host Controller
692<6>[ 1.127268] usbcore: registered new interface driver cdc_acm
693<6>[ 1.127274] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
694<6>[ 1.127320] usbcore: registered new interface driver usb-storage
695<6>[ 1.127351] usbcore: registered new interface driver ums-alauda
696<6>[ 1.127383] usbcore: registered new interface driver ums-cypress
697<6>[ 1.127414] usbcore: registered new interface driver ums-datafab
698<6>[ 1.127444] usbcore: registered new interface driver ums-freecom
699<6>[ 1.127477] usbcore: registered new interface driver ums-isd200
700<6>[ 1.127508] usbcore: registered new interface driver ums-jumpshot
701<6>[ 1.127538] usbcore: registered new interface driver ums-karma
702<6>[ 1.127568] usbcore: registered new interface driver ums-sddr09
703<6>[ 1.127600] usbcore: registered new interface driver ums-sddr55
704<6>[ 1.127632] usbcore: registered new interface driver ums-usbat
705<6>[ 1.127716] usbcore: registered new interface driver usbserial
706<6>[ 1.127752] usbcore: registered new interface driver usb_ehset_test
707<6>[ 1.128270] gbridge_init: gbridge_init successs.
708<6>[ 1.128535] mousedev: PS/2 mouse device common for all mice
709<6>[ 1.128693] usbcore: registered new interface driver xpad
710<4>[ 1.128702] tony_test:[ft5435_ts_init]
711<4>[ 1.129134] ~~~~~ ft5435_ts_probe start
712<4>[ 1.129139] [ft5435_ts_probe]CONFIG_FB is defined
713<4>[ 1.129144] [ft5435_ts_probe]CONFIG_PM is defined
714<4>[ 1.129183] [ft5435_get_dt_vkey]000
715<4>[ 1.129187] [ft5435_get_dt_vkey]111
716<4>[ 1.129192] [ft5435_get_dt_vkey]222
717<4>[ 1.129196] [ft5435_get_dt_vkey]333
718<4>[ 1.129203] [FTS]keycode = 172, x= 500, y=2040
719<4>[ 1.129209] [FTS]keycode = 139, x= 200, y=2040
720<4>[ 1.129215] [FTS]keycode = 158, x= 800, y=2040
721<4>[ 1.129219] [ft5435_get_dt_vkey]5555
722<6>[ 1.129352] input: ft5435_ts as /devices/soc/78b7000.i2c/i2c-3/3-0038/input/input1
723<3>[ 1.370246] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x10 (ok)
724<3>[ 1.370340] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x38 MSTR_STS:0x091343c8 OPER:0x00000010
725<3>[ 1.370375] ft5435_ts 3-0038: ft5435_i2c_read: i2c read error.
726<3>[ 1.600104] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x38 MSTR_STS:0x091343c8 OPER:0x00000010
727<3>[ 1.600132] ft5435_ts 3-0038: ft5435_i2c_read: i2c read error.
728<3>[ 1.830093] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x38 MSTR_STS:0x091343c8 OPER:0x00000010
729<3>[ 1.830119] ft5435_ts 3-0038: ft5435_i2c_read: i2c read error.
730<3>[ 2.060040] ft5435_ts 3-0038: version read failed
731<4>[ 2.120419] reset gpio : 64
732<5>[ 2.330862] synaptics_rmi4_check_status: In flash prog mode, status = 0x05
733<6>[ 2.332037] input: synaptics_dsx_v21 as /devices/soc/78b7000.i2c/i2c-3/3-0020/input/input2
734<3>[ 2.332813] yinchenyang in lansi td4310 i2c probe
735<4>[ 2.332828] reset gpio : 64
736<3>[ 2.540046] synaptics_rmi4_gpio_setup: Failed to get gpio 65 (code: -16)
737<3>[ 2.540054] lansi_dsx_i2c 3-0070: synaptics_rmi4_set_gpio: Failed to configure attention GPIO
738<3>[ 2.540062] lansi_dsx_v21 lansi_dsx_v21.0: synaptics_rmi4_probe: Failed to set up GPIO's
739<4>[ 2.540139] lansi_dsx_v21: probe of lansi_dsx_v21.0 failed with error -16
740<3>[ 2.540174] [NVT-ts] nvt_driver_init 1799: start
741<3>[ 2.540219] [NVT-ts] nvt_ts_probe 1310: start
742<3>[ 2.540229] [NVT-ts] nvt_parse_dt 1020: novatek,irq-gpio=65
743<3>[ 2.540235] [NVT-ts] nvt_gpio_config 1045: Failed to request NVT-int GPIO
744<3>[ 2.540240] [NVT-ts] nvt_ts_probe 1327: gpio config error!
745<4>[ 2.540250] NVT-ts: probe of 3-0062 failed with error -16
746<6>[ 2.540273] nvt_driver_init: finished
747<3>[ 2.540281] [FTS]fts_ts_init: Enter
748<3>[ 2.540320] [FTS]fts_ts_init: Exit(1628)
749<7>[ 2.540328] SAR virtualsar_init - Start driver initialization...
750<6>[ 2.540358] virtualsar,sar 3-0033: virtualsar_probe
751<7>[ 2.540364] SAR virtualsar_probe - Device tree matched!
752<4>[ 2.540370] parse irq gpio correctly
753<4>[ 2.540370] sar_parse_dt success
754<6>[ 2.540489] input: vitural-sar as /devices/virtual/input/input3
755<4>[ 2.540598] ------------[ cut here ]------------
756<4>[ 2.540609] WARNING: CPU: 0 PID: 1 at /home/work/vince-n-stable-build/kernel/msm-3.18/kernel/irq/manage.c:540 irq_set_irq_wake+0xb4/0x12c()
757<4>[ 2.540614] Unbalanced IRQ 137 wake disable
758<4>[ 2.540618] Modules linked in:
759<4>[ 2.540628] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-perf-ge7a81de #1
760<4>[ 2.540633] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3_E7 (DT)
761<0>[ 2.540638] Call trace:
762<4>[ 2.540647] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c
763<4>[ 2.540653] [<ffffffc00008a294>] show_stack+0x20/0x28
764<4>[ 2.540661] [<ffffffc000dcab98>] dump_stack+0x80/0xa4
765<4>[ 2.540668] [<ffffffc0000a5bc0>] warn_slowpath_common+0x94/0xb8
766<4>[ 2.540673] [<ffffffc0000a5c6c>] warn_slowpath_fmt+0x88/0xac
767<4>[ 2.540679] [<ffffffc0000f9658>] irq_set_irq_wake+0xb4/0x12c
768<4>[ 2.540687] [<ffffffc0007d5fac>] sar_irq_disable+0x3c/0x5c
769<4>[ 2.540693] [<ffffffc0007d62bc>] virtualsar_probe+0x2f0/0x3a0
770<4>[ 2.540701] [<ffffffc0007e6c58>] i2c_device_probe+0xc4/0xf8
771<4>[ 2.540709] [<ffffffc0005b01e0>] driver_probe_device+0xe0/0x22c
772<4>[ 2.540714] [<ffffffc0005b03f4>] __driver_attach+0x74/0xa0
773<4>[ 2.540720] [<ffffffc0005af1e0>] bus_for_each_dev+0x9c/0xcc
774<4>[ 2.540726] [<ffffffc0005afc3c>] driver_attach+0x2c/0x34
775<4>[ 2.540732] [<ffffffc0005af8ac>] bus_add_driver+0x104/0x1d4
776<4>[ 2.540738] [<ffffffc0005b0e78>] driver_register+0x9c/0xe8
777<4>[ 2.540744] [<ffffffc0007e60b4>] i2c_register_driver+0x58/0xb8
778<4>[ 2.540750] [<ffffffc00155e438>] virtualsar_init+0x34/0x58
779<4>[ 2.540756] [<ffffffc000082b70>] do_one_initcall+0x194/0x1b0
780<4>[ 2.540764] [<ffffffc001521b94>] kernel_init_freeable+0x1d0/0x284
781<4>[ 2.540770] [<ffffffc000dc4538>] kernel_init+0x20/0xdc
782<4>[ 2.540775] ---[ end trace 8a318ef28b54bd34 ]---
783<4>[ 2.540783] after sar_irq_enable,probe end
784<4>[ 2.540806] virtualsar,sar: probe of 3-0033 failed with error 1
785<4>[ 2.540832] ret : 0
786<4>[ 2.541434] gf_probe 825
787<6>[ 2.541597] input: uinput-goodix as /devices/virtual/input/input4
788<4>[ 2.541655] gf_probe 944 end,status = 0
789<6>[ 2.541816] status = 0x0
790<3>[ 2.542288] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio16" for function "blsp_spi7"
791<3>[ 2.542303] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio17" for function "blsp_spi7"
792<3>[ 2.542317] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio18" for function "blsp_spi7"
793<3>[ 2.542331] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio19" for function "blsp_spi7"
794<6>[ 2.542431] fpc1020 soc:fpc1020: fpc1020_probe: ok
795<6>[ 2.542541] fpc1020_init OK
796<6>[ 2.543299] input: hbtp_vm as /devices/virtual/input/input5
797<6>[ 2.544047] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
798<6>[ 2.544210] i2c /dev entries driver
799<4>[ 2.544405] peelir_init:npages = 150
800<4>[ 2.544610] @@@@ peelir_probe, 402
801<4>[ 2.544616] @@@@ peelir_probe, 417
802<4>[ 2.544716] peelir_probe: lr-gpio-valid = 0
803<4>[ 2.544721] peelir_probe:lr_en = 73
804<3>[ 2.550075] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
805<3>[ 2.550472] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000
806<3>[ 2.550732] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000
807<3>[ 2.553100] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
808<3>[ 2.555085] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
809<3>[ 2.555832] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
810<3>[ 2.556508] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
811<3>[ 2.558568] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
812<3>[ 2.559809] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
813<3>[ 2.561073] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts
814<3>[ 2.561629] msm_camera_pinctrl_init:1277 Getting pinctrl handle failed
815<3>[ 2.561635] msm_actuator_platform_probe:1952 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
816<4>[ 2.561711] qcom,actuator: probe of 1b0c000.qcom,cci:qcom,actuator@0 failed with error -22
817<3>[ 2.562437] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
818<6>[ 2.579934] msm_cci_init:1426: hw_version = 0x10020005
819<3>[ 2.579962] read_eeprom_memory 157
820<4>[ 2.833169] before get_tddi_lockdown_data
821<3>[ 3.267507] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
822<6>[ 3.285973] msm_cci_init:1426: hw_version = 0x10020005
823<3>[ 3.285997] read_eeprom_memory 157
824<3>[ 3.286434] msm_cci_irq:1778 MASTER_0 error 0x10000000
825<3>[ 3.286463] msm_cci_i2c_read:955 read_words = 0, exp words = 1
826<3>[ 3.286469] msm_cci_i2c_read_bytes:1038 failed rc -22
827<3>[ 3.286474] read_eeprom_memory 173 error
828<3>[ 3.286479] msm_eeprom_platform_probe read_eeprom_memory failed
829<4>[ 3.301860] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@1 failed with error -22
830<3>[ 3.302262] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
831<6>[ 3.319192] msm_cci_init:1426: hw_version = 0x10020005
832<3>[ 3.319215] read_eeprom_memory 157
833<3>[ 3.536214] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
834<6>[ 3.553462] msm_cci_init:1426: hw_version = 0x10020005
835<3>[ 3.553488] read_eeprom_memory 157
836<3>[ 3.767568] msm_frontflash_get_dt_data:1036 [WENDELL]-msm_frontflash_get_dt_data: front_pinctrl.en_gpio=36
837<6>[ 3.767579] msm_frontflash_get_dt_data:1048 [WENDELL]msm_frontflash_get_dt_data:1048 fctrl->flash_driver_type = 2
838<3>[ 3.767653] msm_frontflash_platform_probe:1197 [camera]msm_frontflash_platform_probe:1197 frontflash sd name = v4l-subdev11
839<3>[ 3.767716] msm_frontflash_platform_probe:1207 [frontflash]probe success
840<6>[ 3.773807] MSM-CPP cpp_init_hardware:869 CPP HW Version: 0x40030003
841<3>[ 3.773817] MSM-CPP cpp_init_hardware:887 stream_cnt:0
842<3>[ 3.785262] __msm_jpeg_init:1537] Jpeg Device id 0
843<6>[ 3.789187] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=17
844<6>[ 3.791879] TYPEC: qpnp_typec_probe: TypeC successfully probed state=0 CC-line-state=2
845<3>[ 3.792837] unable to find DT imem DLOAD mode node
846<3>[ 3.793410] unable to find DT imem EDLOAD mode node
847<4>[ 3.794923] thermal thermal_zone1: failed to read out thermal zone 1
848<4>[ 3.795218] thermal thermal_zone2: failed to read out thermal zone 2
849<4>[ 3.795516] thermal thermal_zone3: failed to read out thermal zone 3
850<3>[ 3.796170] qpnp_vadc_read: no vadc_chg_vote found
851<3>[ 3.796176] qpnp_vadc_get_temp: VADC read error with -22
852<4>[ 3.796183] thermal thermal_zone4: failed to read out thermal zone 4
853<6>[ 3.817860] device-mapper: uevent: version 1.0.3
854<6>[ 3.818021] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
855<6>[ 3.818114] device-mapper: req-crypt: dm-req-crypt successfully initalized.
856<6>[ 3.818114]
857<6>[ 3.819123] sdhci: Secure Digital Host Controller Interface driver
858<6>[ 3.819128] sdhci: Copyright(c) Pierre Ossman
859<6>[ 3.819136] sdhci-pltfm: SDHCI platform and OF driver helper
860<6>[ 3.819773] qcom_ice_get_pdevice: found ice device ffffffc0039ea600
861<6>[ 3.819779] qcom_ice_get_pdevice: matching platform device ffffffc0dd2ecc00
862<6>[ 3.823772] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8001cf0000
863<6>[ 3.824168] sdhci_msm 7824900.sdhci: No vmmc regulator found
864<6>[ 3.824175] sdhci_msm 7824900.sdhci: No vqmmc regulator found
865<6>[ 3.824480] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode
866<4>[ 3.853516] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
867<6>[ 3.870493] sdhci_msm 7864900.sdhci: No vmmc regulator found
868<6>[ 3.870500] sdhci_msm 7864900.sdhci: No vqmmc regulator found
869<6>[ 3.870832] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode
870<4>[ 3.897586] qcom,leds-qpnp: probe of leds-qpnp-22 failed with error -10
871<6>[ 3.901438] mmc0: Out-of-interrupt timeout is 50[ms]
872<6>[ 3.901444] mmc0: BKOPS_EN equals 0x2
873<6>[ 3.901450] mmc0: eMMC FW version: 0xa2
874<6>[ 3.901454] mmc0: CMDQ supported: depth: 32
875<6>[ 3.901459] mmc0: cache barrier support 1 flush policy 1
876<6>[ 3.902391] tz_log 8600720.tz-log: Hyp log service is not supported
877<6>[ 3.903434] hidraw: raw HID events driver (C) Jiri Kosina
878<6>[ 3.903779] usbcore: registered new interface driver usbhid
879<6>[ 3.903784] usbhid: USB HID core driver
880<6>[ 3.904152] ashmem: initialized
881<6>[ 3.904751] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
882<6>[ 3.908363] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
883<3>[ 3.911840] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
884<3>[ 3.911983] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
885<6>[ 3.912669] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 253952 slot-sz: 24
886<6>[ 3.912958] desc-base: 0xffffff8001e94000 trans-base: 0xffffff8002500000
887<6>[ 3.912958] desc_dma 0xf4479000 trans_dma: 0xf4880000
888<6>[ 3.912975] mmc0: CMDQ enabled on card
889<6>[ 3.912984] mmc0: new HS400 MMC card at address 0001
890<6>[ 3.913354] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2 (0xffffffc0daacb380)
891<6>[ 3.913362] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2 (0xffffffc0daacb388)
892<6>[ 3.913464] mmcblk0: mmc0:0001 HCG8a4 58.2 GiB
893<6>[ 3.913554] mmcblk0rpmb: mmc0:0001 HCG8a4 partition 3 4.00 MiB
894<6>[ 3.913691] coresight-fuse a601c.fuse: Fuse initialized
895<4>[ 3.914044] coresight-cti: probe of 6010000.cti failed with error -1
896<4>[ 3.914070] coresight-cti: probe of 6011000.cti failed with error -1
897<4>[ 3.914096] coresight-cti: probe of 6012000.cti failed with error -1
898<4>[ 3.914121] coresight-cti: probe of 6013000.cti failed with error -1
899<4>[ 3.914146] coresight-cti: probe of 6014000.cti failed with error -1
900<4>[ 3.914171] coresight-cti: probe of 6015000.cti failed with error -1
901<4>[ 3.914196] coresight-cti: probe of 6016000.cti failed with error -1
902<4>[ 3.914221] coresight-cti: probe of 6017000.cti failed with error -1
903<4>[ 3.914247] coresight-cti: probe of 6018000.cti failed with error -1
904<4>[ 3.914272] coresight-cti: probe of 6019000.cti failed with error -1
905<4>[ 3.914297] coresight-cti: probe of 601a000.cti failed with error -1
906<4>[ 3.914322] coresight-cti: probe of 601b000.cti failed with error -1
907<4>[ 3.914346] coresight-cti: probe of 601c000.cti failed with error -1
908<4>[ 3.914371] coresight-cti: probe of 601d000.cti failed with error -1
909<4>[ 3.914396] coresight-cti: probe of 601e000.cti failed with error -1
910<4>[ 3.914421] coresight-cti: probe of 601f000.cti failed with error -1
911<4>[ 3.914446] coresight-cti: probe of 6198000.cti failed with error -1
912<4>[ 3.914471] coresight-cti: probe of 6199000.cti failed with error -1
913<4>[ 3.914496] coresight-cti: probe of 619a000.cti failed with error -1
914<4>[ 3.914522] coresight-cti: probe of 619b000.cti failed with error -1
915<4>[ 3.914546] coresight-cti: probe of 61b8000.cti failed with error -1
916<4>[ 3.914571] coresight-cti: probe of 61b9000.cti failed with error -1
917<4>[ 3.914596] coresight-cti: probe of 61ba000.cti failed with error -1
918<4>[ 3.914621] coresight-cti: probe of 61bb000.cti failed with error -1
919<4>[ 3.914648] coresight-cti: probe of 6128000.cti failed with error -1
920<4>[ 3.914673] coresight-cti: probe of 6124000.cti failed with error -1
921<4>[ 3.914697] coresight-cti: probe of 6134000.cti failed with error -1
922<4>[ 3.914723] coresight-cti: probe of 6139000.cti failed with error -1
923<4>[ 3.914747] coresight-cti: probe of 613c000.cti failed with error -1
924<4>[ 3.914772] coresight-cti: probe of 610c000.cti failed with error -1
925<6>[ 3.915125] coresight-csr 6001000.csr: CSR initialized
926<6>[ 3.915451] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50
927<4>[ 3.915477] coresight-tmc: probe of 6028000.tmc failed with error -1
928<3>[ 3.915618] coresight-tmc 6027000.tmc: failed to get flush cti
929<3>[ 3.915625] coresight-tmc 6027000.tmc: failed to get reset cti
930<6>[ 3.915775] coresight-tmc 6027000.tmc: TMC initialized
931<6>[ 3.917350] nidnt boot config: 0
932<6>[ 3.918348] coresight-tpiu 6020000.tpiu: NIDnT on SDCARD only mode
933<6>[ 3.918434] coresight-tpiu 6020000.tpiu: TPIU initialized
934<6>[ 3.919476] mmc_ffu start,mid:144,name:HCG8a4,fw_ver:162
935<6>[ 3.919482] the emmc fw_version has updated to 162
936<6>[ 3.919486] mmc_ffu end
937<6>[ 3.920197] coresight-replicator 6026000.replicator: REPLICATOR initialized
938<4>[ 3.920624] coresight-stm: probe of 6002000.stm failed with error -1
939<6>[ 3.921047] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
940<6>[ 3.921830] usbcore: registered new interface driver snd-usb-audio
941<6>[ 3.923767] tas2557 2-004c: tas2557_i2c_probe enter
942<7>[ 3.923821] tas2557 2-004c: ti,cdc-reset-gpio=86
943<6>[ 3.980178] tas2557 2-004c: PG2.1 Silicon found
944<7>[ 3.980191] tas2557 2-004c: irq = 94
945<6>[ 3.980254] tas2557 2-004c: tas2557_register_codec, enter
946<6>[ 3.980328] tas2557 2-004c: tas2557_register_misc, leave
947<6>[ 3.980335] tas2557 2-004c: tiload_driver_init
948<6>[ 3.980356] tas2557 2-004c: allocated Major Number: 227
949<6>[ 3.980414] tas2557 2-004c: Registered TiLoad driver, Major number: 227
950<6>[ 3.993366] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
951<6>[ 3.998299] u32 classifier
952<6>[ 3.998305] Actions configured
953<6>[ 3.998334] Netfilter messages via NETLINK v0.30.
954<6>[ 3.998378] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
955<6>[ 3.998727] ctnetlink v0.93: registering with nfnetlink.
956<6>[ 3.999240] xt_time: kernel timezone is -0000
957<6>[ 3.999456] ip_tables: (C) 2000-2006 Netfilter Core Team
958<6>[ 3.999611] arp_tables: (C) 2002 David S. Miller
959<6>[ 3.999658] TCP: cubic registered
960<6>[ 3.999667] Initializing XFRM netlink socket
961<6>[ 4.000009] NET: Registered protocol family 10
962<6>[ 4.000781] mip6: Mobile IPv6
963<6>[ 4.000805] ip6_tables: (C) 2000-2006 Netfilter Core Team
964<6>[ 4.000923] sit: IPv6 over IPv4 tunneling driver
965<6>[ 4.001275] NET: Registered protocol family 17
966<6>[ 4.001296] NET: Registered protocol family 15
967<6>[ 4.001329] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
968<6>[ 4.001339] Ebtables v2.0 registered
969<6>[ 4.001433] Bluetooth: ffffffc07efc7cb8
970<6>[ 4.001443] Bluetooth: ffffffc07efc7ca8Bluetooth: ffffffc07efc7ce8
971<6>[ 4.001480] Bluetooth: ffffffc07efc7cc8Bluetooth: ffffffc07efc7cc8
972<6>[ 4.001494] Bluetooth: ffffffc07efc7ca8Bluetooth: ffffffc07efc7d18
973<6>[ 4.001510] Bluetooth: ffffffc07efc7cf8<6>[ 4.001549] l2tp_core: L2TP core driver, V2.0
974<6>[ 4.001563] l2tp_ppp: PPPoL2TP kernel driver, V2.0
975<6>[ 4.001571] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
976<6>[ 4.001589] l2tp_netlink: L2TP netlink interface
977<6>[ 4.001615] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
978<6>[ 4.001623] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
979<6>[ 4.002289] NET: Registered protocol family 27
980<6>[ 4.006947] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
981<6>[ 4.008821] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
982<6>[ 4.011934] sps:BAM 0x0000000007104000 is registered.
983<3>[ 4.015317] qpnp-smbcharger qpnp-smbcharger-19: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
984<4>[ 4.015326] [SMBCHG]hvdcp enable
985<6>[ 4.015482] smbcharger_charger_otg: no parameters
986<4>[ 4.016343] smbchg_hw_init:read OTG_CFG=78
987<3>[ 4.016801] SMBCHG: set_usb_current_limit_vote_cb: [SMBCHG]icl_ma=1800
988<3>[ 4.016866] SMBCHG: set_usb_current_limit_vote_cb: [SMBCHG]aicl_ma=1000
989<3>[ 4.070085] SMBCHG: set_usb_current_limit_vote_cb: [SMBCHG]icl_ma=0
990<3>[ 4.070146] SMBCHG: set_usb_current_limit_vote_cb: [SMBCHG]aicl_ma=1000
991<3>[ 4.070820] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
992<3>[ 4.071224] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
993<3>[ 4.073739] qpnp-smbcharger qpnp-smbcharger-19: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent!
994<6>[ 4.103493] msm-dwc3 7000000.ssusb: DWC3 in low power mode
995<3>[ 4.103650] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
996<6>[ 4.104411] qpnp-smbcharger qpnp-smbcharger-19: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=0
997<6>[ 4.105935] EDAC DEVICE0: Giving out device to module soc:arm64-cpu-erp controller cache: DEV soc:arm64-cpu-erp (INTERRUPT)
998<3>[ 4.106355] ARM64 CPU ERP: Could not find <cci-irq> IRQ property. Proceeding anyway.
999<3>[ 4.106361] ARM64 CPU ERP: SBE detection is disabled.
1000<5>[ 4.107700] Registered cp15_barrier emulation handler
1001<5>[ 4.107718] Registered setend emulation handler
1002<5>[ 4.108011] Loading compiled-in X.509 certificates
1003<5>[ 4.109581] Loaded X.509 cert 'Magrathea: Glacier signing key: 7e8096764a46d98309a609bdebb8968c52d34b66'
1004<6>[ 4.191254] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped.
1005<6>[ 4.193359] RNDIS_IPA module is loaded.
1006<6>[ 4.193744] file system registered
1007<6>[ 4.193795] mbim_init: initialize 1 instances
1008<6>[ 4.193846] mbim_init: Initialized 1 ports
1009<6>[ 4.195016] rndis_qc_init: initialize rndis QC instance
1010<6>[ 4.195209] Number of LUNs=8
1011<6>[ 4.195217] Mass Storage Function, version: 2009/09/11
1012<6>[ 4.195225] LUN: removable file: (no medium)
1013<6>[ 4.195242] Number of LUNs=1
1014<6>[ 4.195285] LUN: removable file: (no medium)
1015<6>[ 4.195290] Number of LUNs=1
1016<6>[ 4.195510] android_usb gadget: android_usb ready
1017<6>[ 4.196720] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input6
1018<6>[ 4.197029] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-02-12 14:06:22 UTC (3679582)
1019<6>[ 4.200579] msm-core initialized without polling period
1020<3>[ 4.204120] parse_cpu_levels: idx 1 276
1021<3>[ 4.204133] calculate_residency: residency < 0 for LPM
1022<3>[ 4.204286] parse_cpu_levels: idx 1 286
1023<3>[ 4.204295] calculate_residency: residency < 0 for LPM
1024<3>[ 4.208001] qcom,qpnp-flash-led qpnp-flash-led-25: Unable to acquire pinctrl
1025<6>[ 4.210403] rmnet_ipa started initialization
1026<6>[ 4.210453] IPA SSR support = True
1027<6>[ 4.210458] IPA ipa-loaduC = True
1028<6>[ 4.210463] IPA SG support = True
1029<3>[ 4.212446] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
1030<3>[ 4.212453] ipa ipa2_uc_state_check:301 uC is not loaded
1031<6>[ 4.213582] rmnet_ipa completed initialization
1032<6>[ 4.218946] qcom,cc-debug-8953 1874000.qcom,cc-debug: Registered Debug Mux successfully
1033<6>[ 4.230500] msm8952-asoc-wcd c051000.sound: default codec configured
1034<3>[ 4.234225] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
1035<3>[ 4.234269] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
1036<6>[ 4.235413] vdd_vreg: disabling
1037<6>[ 4.235420] adv_vreg: disabling
1038<6>[ 4.235449] gfx_mem_acc_corner: disabling
1039<6>[ 4.235456] apc_mem_acc_corner: disabling
1040<6>[ 4.235467] clock_late_init: Removing enables held for handed-off clocks
1041<6>[ 4.240813] ALSA device list:
1042<6>[ 4.240819] No soundcards found.
1043<3>[ 4.240896] Warning: unable to open an initial console.
1044<6>[ 4.241202] Freeing unused kernel memory: 856K (ffffffc001521000 - ffffffc0015f7000)
1045<6>[ 4.241229] Freeing alternatives memory: 80K (ffffffc0015f7000 - ffffffc00160b000)
1046<13>[ 4.242489] init: init first stage started!
1047<7>[ 4.247002] SELinux: 2048 avtab hash slots, 6784 rules.
1048<7>[ 4.250674] SELinux: 2048 avtab hash slots, 6784 rules.
1049<7>[ 4.250694] SELinux: 1 users, 2 roles, 662 types, 0 bools, 1 sens, 1024 cats
1050<7>[ 4.250700] SELinux: 63 classes, 6784 rules
1051<6>[ 4.252140] SELinux: Class can_socket not defined in policy.
1052<6>[ 4.252147] SELinux: the above unknown classes and permissions will be denied
1053<7>[ 4.252175] SELinux: Completing initialization.
1054<7>[ 4.252178] SELinux: Setting up existing superblocks.
1055<7>[ 4.252191] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1056<7>[ 4.252212] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
1057<7>[ 4.252787] SELinux: initialized (dev bdev, type bdev), not configured for labeling
1058<7>[ 4.252799] SELinux: initialized (dev proc, type proc), uses genfs_contexts
1059<7>[ 4.252829] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
1060<7>[ 4.285074] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
1061<7>[ 4.285089] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
1062<7>[ 4.285099] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
1063<7>[ 4.285106] SELinux: initialized (dev aio, type aio), not configured for labeling
1064<7>[ 4.285116] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
1065<7>[ 4.285137] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
1066<7>[ 4.285205] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1067<7>[ 4.285228] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
1068<5>[ 4.295663] audit: type=1403 audit(3679582.589:2): policy loaded auid=4294967295 ses=4294967295
1069<5>[ 4.296207] audit: type=1404 audit(3679582.589:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
1070<13>[ 4.330214] init: (Initializing SELinux enforcing took 0.09s.)
1071<13>[ 4.332558] init: init second stage started!
1072<13>[ 4.336657] init: Running restorecon...
1073<11>[ 4.392621] init: waitpid failed: No child processes
1074<13>[ 4.393071] init: (Loading properties from /default.prop took 0.00s.)
1075<11>[ 4.393619] init: /init.rc: 13: invalid keyword 'setcon'
1076<11>[ 4.393747] init: /init.rc: 61: invalid keyword 'load_all_props'
1077<11>[ 4.393864] init: could not import file '/init.recovery.logd.rc' from '/init.rc': No such file or directory
1078<13>[ 4.393973] init: (Parsing /init.recovery.usb.rc took 0.00s.)
1079<13>[ 4.394028] init: (Parsing /init.recovery.service.rc took 0.00s.)
1080<11>[ 4.394058] init: could not import file '/init.recovery.vold_decrypt.rc' from '/init.rc': No such file or directory
1081<13>[ 4.394139] init: (Parsing /init.recovery.qcom.rc took 0.00s.)
1082<13>[ 4.394152] init: (Parsing /init.rc took 0.00s.)
1083<5>[ 4.394260] audit: type=1400 audit(3679582.689:4): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=0
1084<13>[ 4.394278] init: write_file: Unable to write to '/sys/fs/selinux/checkreqprot': Permission denied
1085<13>[ 4.394342] init: Starting service 'ueventd'...
1086<13>[ 4.394711] init: Waiting for /dev/.coldboot_done...
1087<13>[ 4.396116] ueventd: ueventd started!
1088<3>[ 4.494505] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1089<13>[ 4.728119] ueventd: Coldboot took 0.33s.
1090<13>[ 4.737447] init: Waiting for /dev/.coldboot_done took 0.34s.
1091<7>[ 4.739953] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
1092<7>[ 4.741324] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
1093<7>[ 4.741746] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
1094<3>[ 4.741826] enable_store: android_usb: already disabled
1095<13>[ 4.742353] init: (Loading properties from /system/build.prop took 0.00s.)
1096<13>[ 4.742379] init: (Loading properties from /vendor/build.prop took 0.00s.)
1097<13>[ 4.742403] init: (Loading properties from /factory/factory.prop took 0.00s.)
1098<13>[ 4.748482] init: (Loading properties from /data/local.prop took 0.00s.)
1099<11>[ 4.748508] init: Unable to open persistent property directory "/data/property": No such file or directory
1100<13>[ 4.748975] init: Starting service 'set_permissive'...
1101<13>[ 4.749299] init: Starting service 'recovery'...
1102<13>[ 4.749735] init: Starting service 'adbd'...
1103<5>[ 4.750295] random: recovery urandom read with 110 bits of entropy available
1104<6>[ 4.753178] read descriptors
1105<6>[ 4.753194] read strings
1106<6>[ 4.753218] mtp_bind_config
1107<5>[ 4.764043] audit: type=1400 audit(3679583.059:5): avc: denied { write } for pid=429 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
1108<5>[ 4.764097] audit: type=1400 audit(3679583.059:6): avc: denied { setenforce } for pid=429 comm="setenforce" scontext=u:r:recovery:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
1109<5>[ 4.764109] audit: type=1404 audit(3679583.059:7): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295
1110<13>[ 4.765147] init: Service 'set_permissive' (pid 423) exited with status 0
1111<6>[ 4.784180] tas2557 2-004c: tas2557_fw_ready:
1112<3>[ 4.784189] tas2557 2-004c: tas2557_uCDSP.bin firmware is not loaded.
1113<4>[ 4.784194] ready end !
1114<3>[ 4.797872] mdss_fb_set_bl_brightness: mdss_fb_set_bl_brightness: 11111 begin bl_level=4095
1115<3>[ 4.797881] mdss_fb_set_bl_brightness: mdss_fb_set_bl_brightness: 11111 end bl_level=4095
1116<11>[ 4.798437] init: avc: denied { set } for property=twrp.crash_counter pid=424 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
1117<3>[ 4.799197] mdss_fb_set_bl_brightness: mdss_fb_set_bl_brightness: 11111 begin bl_level=4095
1118<3>[ 4.799203] mdss_fb_set_bl_brightness: mdss_fb_set_bl_brightness: 11111 end bl_level=4095
1119<4>[ 4.813423] [synaptics]Enter synaptics_rmi4_suspend
1120<4>[ 4.813425] yinchenyang TP suspend begin
1121<4>[ 5.307701] batt_id_ohm=41813
1122<4>[ 5.307704] delta=1813
1123<4>[ 5.307705] limit=2000
1124<4>[ 5.307706] in_range=1
1125<4>[ 5.307707] match=1
1126<4>[ 5.307708] delta=8187
1127<4>[ 5.307710] limit=2500
1128<4>[ 5.307711] in_range=0
1129<4>[ 5.307713] batt_id=41813
1130<3>[ 6.239806] sps: BAM device 0x0000000007884000 is not registered yet.
1131<6>[ 6.240339] sps:BAM 0x0000000007884000 is registered.
1132<6>[ 6.240340] sps:BAM 0x0000000007884000 (va:0xffffff8002560000) enabled: ver:0x19, number of pipes:12
1133<4>[ 6.246937] lockdown info =46,36,31,02,e7,00,31,01
1134<3>[ 6.257771] synaptics_dsx_i2c 3-0020: test_scan_pdt: Failed to find F54
1135<4>[ 6.258802] yinchenyang TP suspend finish
1136<6>[ 6.258805] [info] goodix_fb_state_chg_callback go to the goodix_fb_state_chg_callback value = 9
1137<4>[ 6.258990] TP-time TP resume begin
1138<4>[ 6.260113] TP-time TP resume finish
1139<6>[ 6.260115] [info] goodix_fb_state_chg_callback go to the goodix_fb_state_chg_callback value = 9
1140<4>[ 6.264131] lcd-time event unblank begin
1141<4>[ 6.264188] lcd-time event unblank finish
1142<3>[ 6.280767] mdss_dsi_panel_bl_ctrl: 11111 bl_level=127
1143<3>[ 6.294215] mdss_dsi_panel_bl_ctrl: 11111 bl_level=0
1144<4>[ 6.311553] lcd-time event blank begin
1145<5>[ 6.350048] fwu_start_reflash: Start of reflash process
1146<6>[ 6.350471] synaptics_dsx_i2c 3-0020: fwu_start_reflash: Device in bootloader mode
1147<6>[ 6.350475] synaptics_dsx_i2c 3-0020: fwu_go_nogo: Updating UI firmware and config
1148<4>[ 6.514223] lcd-time event blank finish
1149<4>[ 6.559244] E7 set reset flag
1150<4>[ 6.559244] E7 msm_dss_disable_vreg
1151<4>[ 6.559244]
1152<6>[ 6.559244] [info] goodix_fb_state_chg_callback go to the goodix_fb_state_chg_callback value = 9
1153<4>[ 6.598663] mido lite msm_dss_enable_vreg
1154<4>[ 6.598663] lcd-time event unblank begin
1155<3>[ 6.646364] synaptics_dsx_i2c 3-0020: fwu_read_flash_status: Flash status = 7, command = 0x03
1156<4>[ 6.739678] lcd-time event unblank finish
1157<3>[ 6.740457] mdss_dsi_panel_bl_ctrl: 11111 bl_level=127
1158<4>[ 6.740573] TP-time TP resume begin
1159<6>[ 6.740575] [info] goodix_fb_state_chg_callback go to the goodix_fb_state_chg_callback value = 9
1160<3>[ 6.740783] mdss_fb_set_bl_brightness: mdss_fb_set_bl_brightness: 11111 begin bl_level=4095
1161<3>[ 6.740789] mdss_fb_set_bl_brightness: mdss_fb_set_bl_brightness: 11111 end bl_level=4095
1162<3>[ 6.823812] mdss_dsi_panel_bl_ctrl: 11111 bl_level=4095
1163<5>[ 6.824380] audit: type=1400 audit(3679585.119:8): avc: denied { write } for pid=424 comm="recovery" name="etc" dev="rootfs" ino=6303 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1164<5>[ 6.824403] audit: type=1400 audit(3679585.119:9): avc: denied { add_name } for pid=424 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1165<5>[ 6.824435] audit: type=1400 audit(3679585.119:10): avc: denied { create } for pid=424 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
1166<5>[ 6.824916] audit: type=1400 audit(3679585.119:11): avc: denied { create } for pid=424 comm="recovery" name="cust" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
1167<5>[ 6.935011] random: nonblocking pool is initialized
1168<6>[ 7.152904] EXT4-fs (mmcblk0p50): recovery complete
1169<6>[ 7.154308] EXT4-fs (mmcblk0p50): mounted filesystem with ordered data mode. Opts:
1170<7>[ 7.154334] SELinux: initialized (dev mmcblk0p50, type ext4), uses xattr
1171<5>[ 7.154780] audit: type=1400 audit(3679585.449:12): avc: denied { getattr } for pid=424 comm="recovery" path="/data/media" dev="mmcblk0p50" ino=1826817 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1172<6>[ 7.199822] EXT4-fs (mmcblk0p50): mounted filesystem with ordered data mode. Opts:
1173<7>[ 7.199850] SELinux: initialized (dev mmcblk0p50, type ext4), uses xattr
1174<6>[ 7.233548] EXT4-fs (mmcblk0p50): mounted filesystem with ordered data mode. Opts:
1175<7>[ 7.233577] SELinux: initialized (dev mmcblk0p50, type ext4), uses xattr
1176<6>[ 7.267963] EXT4-fs (mmcblk0p50): mounted filesystem with ordered data mode. Opts:
1177<7>[ 7.267992] SELinux: initialized (dev mmcblk0p50, type ext4), uses xattr
1178<5>[ 7.296522] audit: type=1400 audit(3679585.589:13): avc: denied { mounton } for pid=424 comm="recovery" path="/cache" dev="rootfs" ino=266 scontext=u:r:recovery:s0 tcontext=u:object_r:cache_file:s0 tclass=dir permissive=1
1179<4>[ 7.300060] batt_id_ohm=41813
1180<4>[ 7.300070] delta=1813
1181<4>[ 7.300074] limit=2000
1182<4>[ 7.300079] in_range=1
1183<4>[ 7.300082] match=1
1184<4>[ 7.300086] delta=8187
1185<4>[ 7.300090] limit=2500
1186<4>[ 7.300095] in_range=0
1187<4>[ 7.300099] batt_id=41813
1188<6>[ 7.300214] of_batterydata_get_best_profile: qrd_msm8953_sunwoda_atl_4000mah found
1189<6>[ 7.302171] EXT4-fs (mmcblk0p25): recovery complete
1190<6>[ 7.303292] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
1191<7>[ 7.303314] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
1192<5>[ 7.303526] audit: type=1400 audit(3679585.599:14): avc: denied { create } for pid=424 comm="recovery" name="fstab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1193<5>[ 7.303572] audit: type=1400 audit(3679585.599:15): avc: denied { write } for pid=424 comm="recovery" path="/etc/fstab" dev="rootfs" ino=298 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
1194<5>[ 7.305213] audit: type=1400 audit(3679585.599:16): avc: denied { open } for pid=424 comm="recovery" path="/data/system/storage.xml" dev="mmcblk0p50" ino=98478 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
1195<6>[ 7.315082] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
1196<7>[ 7.315105] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
1197<5>[ 7.315815] audit: type=1400 audit(3679585.609:17): avc: denied { read } for pid=424 comm="recovery" name="/" dev="mmcblk0p50" ino=2 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
1198<6>[ 7.316813] SELinux: Context u:object_r:magisk_file:s0 is not valid (left unmapped).
1199<6>[ 7.319940] SELinux: Context is not valid (left unmapped).
1200<6>[ 7.330195] SELinux: Context u:object_r:textclassifier_data_file:s0 is not valid (left unmapped).
1201<6>[ 7.335107] SELinux: Context u:object_r:hostapd_socket:s0 is not valid (left unmapped).
1202<6>[ 7.337291] SELinux: Context u:object_r:reboot_data_file:s0 is not valid (left unmapped).
1203<6>[ 7.373034] FG: fg_batt_profile_init: Battery SOC: 98, V: 4216741uV
1204<6>[ 7.373472] of_batterydata_get_best_profile: qrd_msm8953_sunwoda_atl_4000mah found
1205<3>[ 7.373798] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1206<6>[ 7.432354] SELinux: Context u:object_r:data_qsee_file:s0 is not valid (left unmapped).
1207<6>[ 7.432454] SELinux: Context u:object_r:qvop-daemon_data_file:s0 is not valid (left unmapped).
1208<6>[ 7.432757] SELinux: Context u:object_r:fm_data_file:s0 is not valid (left unmapped).
1209<6>[ 7.432866] SELinux: Context u:object_r:sensors_data_file:s0 is not valid (left unmapped).
1210<6>[ 7.432959] SELinux: Context u:object_r:seemp_data_file:s0 is not valid (left unmapped).
1211<6>[ 7.433050] SELinux: Context u:object_r:audio_pp_data_file:s0 is not valid (left unmapped).
1212<6>[ 7.469662] SELinux: Context u:object_r:qfp-daemon_data_file:s0 is not valid (left unmapped).
1213<6>[ 7.471252] SELinux: Context u:object_r:display_misc_file:s0 is not valid (left unmapped).
1214<6>[ 7.471581] SELinux: Context u:object_r:lm_data_file:s0 is not valid (left unmapped).
1215<6>[ 7.471948] SELinux: Context u:object_r:vendor_camera_data_file:s0 is not valid (left unmapped).
1216<6>[ 7.473248] SELinux: Context u:object_r:data_qtee_file:s0 is not valid (left unmapped).
1217<6>[ 7.473532] SELinux: Context u:object_r:vendor_tombstone_data_file:s0 is not valid (left unmapped).
1218<6>[ 7.474432] SELinux: Context u:object_r:wifi_vendor_data_file:s0 is not valid (left unmapped).
1219<6>[ 7.474550] SELinux: Context u:object_r:wifi_vendor_wpa_socket:s0 is not valid (left unmapped).
1220<6>[ 7.474841] SELinux: Context u:object_r:wifi_vendor_hostapd_socket:s0 is not valid (left unmapped).
1221<6>[ 7.475474] SELinux: Context u:object_r:netmgrd_data_file:s0 is not valid (left unmapped).
1222<6>[ 7.475618] SELinux: Context u:object_r:ipa_vendor_data_file:s0 is not valid (left unmapped).
1223<6>[ 7.475754] SELinux: Context u:object_r:vendor_radio_data_file:s0 is not valid (left unmapped).
1224<6>[ 7.525219] SELinux: Context u:object_r:location_data_file:s0 is not valid (left unmapped).
1225<6>[ 7.525475] SELinux: Context u:object_r:location_socket:s0 is not valid (left unmapped).
1226<6>[ 7.526255] SELinux: Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
1227<6>[ 7.526446] SELinux: Context u:object_r:iop_data_file:s0 is not valid (left unmapped).
1228<6>[ 7.526589] SELinux: Context u:object_r:qti_logkit_priv_data_file:s0 is not valid (left unmapped).
1229<6>[ 7.526840] SELinux: Context u:object_r:qti_logkit_pub_data_file:s0 is not valid (left unmapped).
1230<6>[ 7.526998] SELinux: Context u:object_r:qti_logkit_priv_socket:s0 is not valid (left unmapped).
1231<6>[ 7.527129] SELinux: Context u:object_r:qti_logkit_pub_socket:s0 is not valid (left unmapped).
1232<3>[ 10.738563] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1233<3>[ 11.591352] SMBCHG: set_usb_current_limit_vote_cb: [SMBCHG]icl_ma=100
1234<3>[ 11.591472] SMBCHG: set_usb_current_limit_vote_cb: [SMBCHG]aicl_ma=1500
1235<3>[ 11.591681] SMBCHG: set_usb_current_limit_vote_cb: [SMBCHG]icl_ma=0
1236<3>[ 11.591716] SMBCHG: set_usb_current_limit_vote_cb: [SMBCHG]aicl_ma=1500
1237<3>[ 11.592505] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1238<3>[ 11.593123] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1239<6>[ 11.714909] msm-dwc3 7000000.ssusb: DWC3 exited from low power mode
1240<3>[ 11.715401] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1241<3>[ 11.977878] synaptics_dsx_i2c 3-0020: fwu_read_flash_status: Flash status = 7, command = 0x00
1242<3>[ 11.978055] synaptics_dsx_i2c 3-0020: fwu_wait_for_idle: Timed out waiting for idle status
1243<5>[ 12.180818] synaptics_rmi4_check_status: In flash prog mode, status = 0x05
1244<3>[ 12.193636] synaptics_dsx_i2c 3-0020: test_scan_pdt: Failed to find F54
1245<3>[ 12.194292] synaptics_dsx_i2c 3-0020: fwu_start_reflash: Failed to do reflash
1246<5>[ 12.194302] fwu_start_reflash: End of reflash process
1247<4>[ 12.194457] config_ver info =ff
1248<3>[ 12.220074] dhx---mdwc = 1
1249<3>[ 12.224144] dhx---dcd = 0
1250<3>[ 12.224733] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1251<3>[ 12.428954] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1252<6>[ 12.516424] android_work: android_work: sent uevent USB_STATE=CONNECTED
1253<6>[ 12.543793] android_usb gadget: high-speed config #1: 86000c8.android_usb
1254<6>[ 12.543887] msm-dwc3 7000000.ssusb: Avail curr from USB = 500
1255<3>[ 12.544048] SMBCHG: set_usb_current_limit_vote_cb: [SMBCHG]icl_ma=500
1256<3>[ 12.544234] SMBCHG: set_usb_current_limit_vote_cb: [SMBCHG]aicl_ma=1500
1257<3>[ 12.545006] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1258<6>[ 12.600091] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1259<3>[ 12.645689] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1260<3>[ 12.646391] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1261<4>[ 12.937893] audit_printk_skb: 411 callbacks suppressed
1262<5>[ 12.937906] audit: type=1400 audit(3679591.229:155): avc: denied { getattr } for pid=424 comm="recovery" path="/data/data/com.qualcomm.timeservice" dev="mmcblk0p50" ino=1640062 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c95,c256,c512,c768 tclass=dir permissive=1
1263<5>[ 12.937942] audit: type=1400 audit(3679591.229:156): avc: denied { read } for pid=424 comm="recovery" name="com.qualcomm.timeservice" dev="mmcblk0p50" ino=1640062 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c95,c256,c512,c768 tclass=dir permissive=1
1264<5>[ 12.937966] audit: type=1400 audit(3679591.229:157): avc: denied { open } for pid=424 comm="recovery" path="/data/data/com.qualcomm.timeservice" dev="mmcblk0p50" ino=1640062 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c95,c256,c512,c768 tclass=dir permissive=1
1265<3>[ 13.243074] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1266<3>[ 13.545201] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1267<5>[ 14.344364] audit: type=1400 audit(3679592.639:158): avc: denied { getattr } for pid=424 comm="recovery" path="/data/data/com.eg.android.AlipayGphone/app_SGLib/app_1569600557/main/libsgmain_1569258414000.zip" dev="mmcblk0p50" ino=2293762 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=lnk_file permissive=1
1268<3>[ 14.544185] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1269<3>[ 15.544209] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1270<3>[ 16.544206] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1271<3>[ 17.544224] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1272<3>[ 18.240074] [oem][dwc3][oem_udc_ssr_work_func][cpu3] vbus_active=1, chg_type(DWC3_SDP_CHARGER=1)=1, speed(USB_SPEED_HIGH=3)=3, vbus_draw=500 mA, inputs=3
1273<5>[ 18.390930] audit: type=1400 audit(3679596.689:159): avc: denied { getattr } for pid=424 comm="recovery" path="/data/data/com.v2ray.ang/files/sock_path" dev="mmcblk0p50" ino=2760756 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=sock_file permissive=1
1274<3>[ 18.544239] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1275<3>[ 19.544237] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1276<3>[ 20.544248] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1277<5>[ 20.593460] audit: type=1400 audit(3679598.889:160): avc: denied { getattr } for pid=424 comm="recovery" path="/data/data/com.yelp.android/files/.realm.temp/1749390138701135412_realm.note" dev="mmcblk0p50" ino=1910227 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=fifo_file permissive=1
1278<5>[ 21.215028] audit: type=1400 audit(3679599.509:161): avc: denied { getattr } for pid=424 comm="recovery" path="/data/data/ru.CDevruhN.sXhkCZDbu/lp" dev="mmcblk0p50" ino=2130974 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1279<5>[ 21.215069] audit: type=1400 audit(3679599.509:162): avc: denied { read } for pid=424 comm="recovery" name="lp" dev="mmcblk0p50" ino=2130974 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1280<5>[ 21.215092] audit: type=1400 audit(3679599.509:163): avc: denied { open } for pid=424 comm="recovery" path="/data/data/ru.CDevruhN.sXhkCZDbu/lp" dev="mmcblk0p50" ino=2130974 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
1281<5>[ 21.215409] audit: type=1400 audit(3679599.509:164): avc: denied { getattr } for pid=424 comm="recovery" path="/data/data/ru.CDevruhN.sXhkCZDbu/lp/lp_utils" dev="mmcblk0p50" ino=2334738 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
1282<5>[ 21.288352] audit: type=1400 audit(3679599.579:165): avc: denied { getattr } for pid=424 comm="recovery" path="/data/app-private" dev="mmcblk0p50" ino=2883585 scontext=u:r:recovery:s0 tcontext=u:object_r:apk_private_data_file:s0 tclass=dir permissive=1
1283<5>[ 21.288391] audit: type=1400 audit(3679599.579:166): avc: denied { read } for pid=424 comm="recovery" name="app-private" dev="mmcblk0p50" ino=2883585 scontext=u:r:recovery:s0 tcontext=u:object_r:apk_private_data_file:s0 tclass=dir permissive=1
1284<5>[ 21.288414] audit: type=1400 audit(3679599.579:167): avc: denied { open } for pid=424 comm="recovery" path="/data/app-private" dev="mmcblk0p50" ino=2883585 scontext=u:r:recovery:s0 tcontext=u:object_r:apk_private_data_file:s0 tclass=dir permissive=1
1285<5>[ 21.289031] audit: type=1400 audit(3679599.579:168): avc: denied { getattr } for pid=424 comm="recovery" path="/data/app-asec" dev="mmcblk0p50" ino=2097153 scontext=u:r:recovery:s0 tcontext=u:object_r:asec_image_file:s0 tclass=dir permissive=1
1286<6>[ 21.523824] SELinux: Context u:object_r:swap_data_file:s0 is not valid (left unmapped).
1287<3>[ 21.544260] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1288<6>[ 21.864755] SELinux: Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
1289<6>[ 21.865103] SELinux: Context u:object_r:dpmd_data_file:s0 is not valid (left unmapped).
1290<6>[ 21.866505] SELinux: Context u:object_r:time_data_file:s0 is not valid (left unmapped).
1291<6>[ 21.867568] SELinux: Context u:object_r:mmi_data_file:s0 is not valid (left unmapped).
1292<4>[ 21.878959] EXT4-fs (mmcblk0p49): warning: maximal mount count reached, running e2fsck is recommended
1293<6>[ 21.879223] EXT4-fs (mmcblk0p49): mounted filesystem with ordered data mode. Opts:
1294<7>[ 21.879242] SELinux: initialized (dev mmcblk0p49, type ext4), uses xattr
1295<6>[ 21.879295] SELinux: Context u:object_r:vendor_file:s0 is not valid (left unmapped).
1296<7>[ 21.888853] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
1297<6>[ 21.905258] EXT4-fs (mmcblk0p26): recovery complete
1298<6>[ 21.906472] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts:
1299<7>[ 21.906492] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
1300<6>[ 21.906554] SELinux: Context u:object_r:persist_file:s0 is not valid (left unmapped).
1301<3>[ 22.544280] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1302<3>[ 23.544261] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1303<3>[ 24.122514] mdss_fb_set_bl_brightness: mdss_fb_set_bl_brightness: 11111 begin bl_level=4095
1304<3>[ 24.122527] mdss_fb_set_bl_brightness: mdss_fb_set_bl_brightness: 11111 end bl_level=4095
1305<11>[ 24.125620] init: avc: denied { set } for property=sys.usb.config pid=424 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1
1306<3>[ 24.125732] dwc3 7000000.dwc3: request ffffffc0da131600 was not queued to ep0out
1307<4>[ 24.126436] enable_store: 1 callbacks suppressed
1308<3>[ 24.126443] enable_store: android_usb: already disabled
1309<6>[ 24.126537] mtp_bind_config
1310<6>[ 24.193656] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
1311<7>[ 24.193685] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
1312<3>[ 24.269325] dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND.
1313<6>[ 24.363671] msm-dwc3 7000000.ssusb: Avail curr from USB = 0
1314<3>[ 24.363760] SMBCHG: set_usb_current_limit_vote_cb: [SMBCHG]icl_ma=0
1315<3>[ 24.363835] SMBCHG: set_usb_current_limit_vote_cb: [SMBCHG]aicl_ma=1500
1316<6>[ 24.363950] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
1317<3>[ 24.364117] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1318<3>[ 24.368318] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1319<6>[ 24.451735] android_work: android_work: sent uevent USB_STATE=CONNECTED
1320<6>[ 24.478639] android_usb gadget: high-speed config #1: 86000c8.android_usb
1321<6>[ 24.478717] msm-dwc3 7000000.ssusb: Avail curr from USB = 500
1322<3>[ 24.478828] SMBCHG: set_usb_current_limit_vote_cb: [SMBCHG]icl_ma=500
1323<3>[ 24.478963] SMBCHG: set_usb_current_limit_vote_cb: [SMBCHG]aicl_ma=1500
1324<3>[ 24.479177] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1325<6>[ 24.530060] android_work: android_work: sent uevent USB_STATE=CONFIGURED
1326<3>[ 24.580399] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1327<6>[ 24.928725] mtp_open
1328<3>[ 25.478985] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1329<3>[ 26.478994] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1330<3>[ 27.478993] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1331<3>[ 28.479005] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1332<3>[ 29.479019] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1333<3>[ 30.479040] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1334<3>[ 31.479036] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1335<3>[ 32.479042] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1336<3>[ 33.479053] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1337<3>[ 34.479063] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1338<3>[ 35.479069] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1339<3>[ 36.479081] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1340<3>[ 37.479088] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1341<3>[ 38.479093] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1342<3>[ 39.479103] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1343<3>[ 40.479111] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1344<3>[ 41.479122] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1345<3>[ 42.479156] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1346<3>[ 43.479160] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1347<3>[ 44.126091] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0
1348<3>[ 44.479163] SMBCHG: smbchg_battery_get_property: [SMBCHG]therm_lvl_sel=0