· 6 years ago · Dec 31, 2019, 03:22 PM
1▒[ 0.277]
2
3U-Boot 2011.09-rc1-00000-g0721a56-dirty (Jun 18 2019 - 05:33:45) Allwinner Techn ology
4
5[ 0.287]version: 1.1.0
6[ 0.289]uboot commit : 0721a5646a0c77acb3c583af3dcaa4975db462ce
7
8ready
9normal dc exist, limit to dc
10no key input
11dram_para_set start
12dram_para_set end
13In: Out: Err: Net: Warning: failed to set MAC address
14
15▒fes commit : fc3061df4dbd4153819b2d2f141d82b88fea51cf
16
17beign to init dram
18DRAM DRIVE INFO: V1.7
19DRAM Type =3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
20DRAM zq value: 00003bbbDRAM CLK =600 MHZ
21ID CHECK VERSION: V0.1
22using ic R16
23USE PLL DDR1
24USE PLL NORMAL
25PLL FREQUENCE = 1200 MHZ
26DRAM PLL DDR1 frequency extend open !
27DRAM master priority setting ok.
28Auto calculate timing parameter!
29para_dram_tpr0 = 0047a14f
30para_dram_tpr1 = 01c2294c
31para_dram_tpr2 = 00069049
32tcl = 6,tcwl = 4
33DRAM TIMING PARA0 = 0b0f180c
34DRAM TIMING PARA1 = 0003040f
35DRAM TIMING PARA2 = 0406050a
36DRAM TIMING PARA3 = 0000400c
37DRAM TIMING PARA4 = 05020405
38DRAM TIMING PARA5 = 05050403
39DRAM TIMING PARA8 = 90003310
40DRAM PHY INTERFACE PARA = 02040102
41DRAM VTC is disable
42DRAM dynamic DQS/DQ ODT is on
43DRAM DQS gate is PD mode.
44DRAM one rank training is on,the value is 91003587
45DRAM work mode register value = 004318d4
46DRAM SIZE =256 M
47set one rank ODTMAP
48DRAM simple test OK.
49init dram ok
50[ 78.830]
51
52U-Boot 2011.09-rc1-00017-g2e1629f (Oct 29 2019 - 01:16:14) Allwinner Technology
53
54[ 78.839]version: 1.1.0
55[ 78.841]uboot commit : 2e1629fb271420e14322a92626057c066a1b1cc6
56
57ready
58normal dc exist, limit to dc
59no key input
60dram_para_set start
61dram_para_set end
62In: Out: Err: Net: Warning: failed to set MAC address
63
64
65 Verifying Checksum ... OK
66 Verifying Checksum ... OK
67OK
68OK
69Uncompressing Linux... done, booting the kernel.
70[sun8i_fixup]: From boot, get meminfo:
71 Start: 0x40000000
72 Size: 256MB
73early_ion_cma_512m: ion reserve: [0x4d800000, 0x50000000]!
74ion_cma_512m reserve: 40m!
75ion_cma_1g reserve: 176m!
76ion_carveout_512m reserve: 50m!
77ion_carveout_1g reserve: 150m!
78[ 0.000000] Booting Linux on physical CPU 0
79[ 0.000000] Linux version 3.4.113 (root@runner-0277ea0f-project-14662438-conc urrent-0) (gcc version 5.5.0 (Linaro GCC 5.5-2017.10) ) #1 SMP PREEMPT Tue Nov 5 05:29:04 UTC 2019
80[ 0.000000] cma: CMA: reserved 40 MiB at 4d800000
81[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0a4c000 s10880 r8192 d13696 u32768
82[ 0.000000] Kernel command line: boot_type=0 disp_para=100 fb_base=0x0 config _size=42220 boot.serialno=261789089081ffffe77d boot.hardware=sun8i console=ttyS0 ,115200 init=/sbin/init ion_cma_512m=40m ion_cma_1g=176m ion_carveout_512m=50m i on_carveout_1g=150m coherent_pool=4m loglevel=7 partitions=boot-res@nanda:env@na ndb:boot@nandc:rootfs@nandd:rootfs_data@nande:misc@nandf:UDISK@nandg
83[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
84[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
85[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
86[ 0.000000] Memory: 256MB = 256MB total
87[ 0.000000] Memory: 199952k/199952k available, 62192k reserved, 0K highmem
88[ 0.000000] Virtual kernel memory layout:
89[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
90[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
91[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
92[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
93[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
94[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
95[ 0.000000] .text : 0xc0008000 - 0xc068d940 (6679 kB)
96[ 0.000000] .init : 0xc068e000 - 0xc06d2a80 ( 275 kB)
97[ 0.000000] .data : 0xc06d4000 - 0xc073cca8 ( 420 kB)
98[ 0.000000] .bss : 0xc073d024 - 0xc07f7980 ( 747 kB)
99[ 0.000000] Preemptible hierarchical RCU implementation.
100[ 0.000000] NR_IRQS:416
101[ 0.000000] try to syncboot of clk ats
102[ 0.000000] try to syncboot of clk usbphy0
103[ 0.000000] try to syncboot of clk sdmmc2mod
104[ 0.000000] try to syncboot of clk uart0
105[ 0.000000] try to syncboot of clk pll_ddr1
106[ 0.000000] try to syncboot of clk debe0
107[ 0.000000] try to syncboot of clk nand
108[ 0.000000] try to syncboot of clk dma
109[ 0.000000] try to syncboot of clk sat
110[ 0.000000] try to syncboot of clk usbotg
111[ 0.000000] try to syncboot of clk pio
112[ 0.000000] try to syncboot of clk mbus
113[ 0.000000] try to syncboot of clk drc0
114[ 0.000000] try to syncboot of clk lcd0ch0
115[ 0.000000] try to syncboot of clk axi
116[ 0.000000] Architected local timer running at 24.00MHz.
117[ 0.000000] Switching to timer-based delay loop
118[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 17895 6ms
119[ 0.000000] Console: colour dummy device 80x30
120[ 0.000456] Calibrating delay loop (skipped), value calculated using timer fr equency.. 14405.00 BogoMIPS (lpj=24000000)
121[ 0.000481] pid_max: default: 32768 minimum: 301
122[ 0.001083] Mount-cache hash table entries: 512
123[ 0.002281] CPU: Testing write buffer coherency: ok
124[ 0.002345] ftrace: allocating 18773 entries in 56 pages
125[ 0.023658] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
126[ 0.023676] [sunxi_smp_prepare_cpus] enter
127[ 0.023736] Setting up static identity map for 0x404bae98 - 0x404baef0
128[ 0.003333] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
129[ 0.003333] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
130[ 0.003333] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
131[ 0.076860] Brought up 4 CPUs
132[ 0.076860] SMP: Total of 4 processors activated (57623.00 BogoMIPS).
133[ 0.080471] devtmpfs: initialized
134[ 0.087945] pinctrl core: initialized pinctrl subsystem
135[ 0.087945] dummy:
136[ 0.091429] NET: Registered protocol family 16
137[ 0.094976] DMA: preallocated 4096 KiB pool for atomic coherent allocations
138[ 0.095085] script_sysfs_init success
139[ 0.095450] sunxi pinctrl probe enter
140[ 0.097583] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
141[ 0.102564] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
142[ 0.102883] axp_pinctrl_probe enter...
143[ 0.103156] gpiochip_add: registered GPIOs 1024 to 1029 on device: axp-pinctr l
144[ 0.103282] mainkey total count : 79
145[ 0.103290] mainkey name : product, pin count : 0
146[ 0.103299] mainkey name : platform, pin count : 2
147[ 0.103311] mainkey name : target, pin count : 0
148[ 0.103320] mainkey name : power_sply, pin count : 0
149[ 0.103329] mainkey name : key_detect_en, pin count : 0
150[ 0.103333] mainkey name : fel_key, pin count : 1
151[ 0.103347] mainkey name : gpiokey_para, pin count : 2
152[ 0.103360] mainkey name : card_boot, pin count : 0
153[ 0.103369] mainkey name : card0_boot_para, pin count : 6
154[ 0.103384] mainkey name : card2_boot_para, pin count : 10
155[ 0.103404] mainkey name : twi_para, pin count : 2
156[ 0.103415] mainkey name : uart_para, pin count : 2
157[ 0.103427] mainkey name : force_uart_para, pin count : 2
158[ 0.103438] mainkey name : jtag_para, pin count : 4
159[ 0.103451] mainkey name : clock, pin count : 0
160[ 0.103459] mainkey name : pm_para, pin count : 0
161[ 0.103468] mainkey name : dram_para, pin count : 0
162[ 0.103477] mainkey name : pm_para, pin count : 0
163[ 0.103486] mainkey name : wakeup_src_para, pin count : 1
164[ 0.103497] mainkey name : twi0, pin count : 2
165[ 0.103508] mainkey name : twi1, pin count : 2
166[ 0.103519] mainkey name : twi2, pin count : 2
167[ 0.103529] mainkey name : uart0, pin count : 2
168[ 0.103540] mainkey name : uart1, pin count : 4
169[ 0.103552] mainkey name : uart2, pin count : 2
170[ 0.103563] mainkey name : uart3, pin count : 4
171[ 0.103575] mainkey name : uart4, pin count : 4
172[ 0.103588] mainkey name : spi0, pin count : 4
173[ 0.103600] mainkey name : spi1, pin count : 4
174[ 0.103612] mainkey name : spi_devices, pin count : 0
175[ 0.103621] mainkey name : spi_board0, pin count : 0
176[ 0.103630] mainkey name : ctp_para, pin count : 2
177[ 0.103642] mainkey name : ctp_list_para, pin count : 0
178[ 0.103651] mainkey name : tkey_para, pin count : 0
179[ 0.103660] mainkey name : motor_para, pin count : 1
180[ 0.103672] map mainkey [motor_para] to pinctrl, map number [2]
181[ 0.103694] mainkey name : ths_para, pin count : 0
182[ 0.103704] mainkey name : cooler_table, pin count : 0
183[ 0.103713] mainkey name : nand0_para, pin count : 19
184[ 0.103742] mainkey name : hdmi_ep952_para, pin count : 2
185[ 0.103754] mainkey name : disp_init, pin count : 0
186[ 0.103763] mainkey name : lcd0_para, pin count : 29
187[ 0.103791] mainkey name : pwm0_para, pin count : 1
188[ 0.103802] mainkey name : pwm1_para, pin count : 1
189[ 0.103813] mainkey name : csi0, pin count : 16
190[ 0.103832] mainkey name : led_para, pin count : 2
191[ 0.103843] mainkey name : mmc0_para, pin count : 7
192[ 0.103858] mainkey name : mmc1_para, pin count : 6
193[ 0.103873] mainkey name : mmc2_para, pin count : 11
194[ 0.103893] mainkey name : usbc0, pin count : 3
195<[ 0.103925] mainkey name : usbc1, pin count : 0
196[ 0.103934] mainkey name : usb_feature, pin count : 0
197[ 0.103944] mainkey name : msc_feature, pin count : 0
198[ 0.103953] mainkey name : gsensor_para, pin count : 1
199[ 0.103965] mainkey name : gsensor_list_para, pin count : 0
200[ 0.103975] mainkey name : rf_para, pin count : 0
201[ 0.103984] mainkey name : wifi_para, pin count : 2
202[ 0.103995] mainkey name : bt_para, pin count : 3
203[ 0.104008] mainkey name : gps_para, pin count : 2
204[ 0.104019] mainkey name : 3g_para, pin count : 4
205[ 0.104032] mainkey name : gy_para, pin count : 0
206[ 0.104042] mainkey name : gy_list_para, pin count : 0
207[ 0.104051] mainkey name : ls_para, pin count : 1
208[ 0.104062] mainkey name : ls_list_para, pin count : 0
209[ 0.104072] mainkey name : compass_para, pin count : 0
210[ 0.104082] mainkey name : i2s0, pin count : 3
211[ 0.104093] mainkey name : i2s1, pin count : 4
212[ 0.104106] mainkey name : audio0, pin count : 0
213[ 0.104115] mainkey name : pmu1_para, pin count : 0
214[ 0.104125] mainkey name : pmu2_para, pin count : 0
215[ 0.104134] mainkey name : dvfs_table, pin count : 0
216[ 0.104144] mainkey name : Vdevice, pin count : 2
217[ 0.104155] mainkey name : s_uart0, pin count : 2
218[ 0.104167] mainkey name : s_rsb0, pin count : 2
219[ 0.104178] mainkey name : s_jtag0, pin count : 4
220[ 0.104191] mainkey name : s_powchk, pin count : 0
221[ 0.104201] mainkey name : mali_para, pin count : 0
222[ 0.104211] mainkey name : dram_dvfs_table, pin count : 0
223[ 0.104220] mainkey name : charging_type, pin count : 0
224[ 0.104230] mainkey name : dram_scene_table, pin count : 0
225[ 0.104238] axp pinctrl driver probe ok
226[ 0.106152] script config pll3 to 297 Mhz
227[ 0.106166] script config pll4 to 300 Mhz
228[ 0.106198] script config pll6 to 600 Mhz
229[ 0.106211] script config pll8 to 384 Mhz
230[ 0.106231] script config pll9 to 480 Mhz
231[ 0.106243] script config pll10 to 297 Mhz
232[ 0.117516] bio: create slab <bio-0> at 0
233[ 0.117516] [ARISC] :sunxi-arisc driver v1.60
234[ 0.155243] [ARISC] :arisc version: [v0.0.23.1]
235[ 0.366987] [ARISC] :sunxi-arisc driver v1.60 startup succeeded
236[ 0.370276] SCSI subsystem initialized
237[ 0.370527] usbcore: registered new interface driver usbfs
238[ 0.370706] usbcore: registered new interface driver hub
239[ 0.370733] usbcore: registered new device driver usb
240[ 0.371487] Linux video capture interface: v2.00
241[ 0.371998] axp22_board axp22_board: AXP (CHIP ID: 0x06) detected
242[ 0.376246] axp22_dcdc1: 1600 <--> 3400 mV at 3000 mV
243[ 0.376693] axp22_dcdc2: 600 <--> 1540 mV at 1100 mV
244[ 0.376974] axp22_dcdc3: 600 <--> 1860 mV at 1200 mV
245[ 0.377004] axp22_dcdc4: 600 <--> 1540 mV at 1100 mV
246[ 0.377004] axp22_dcdc5: 1000 <--> 2550 mV at 1500 mV
247[ 0.377004] axp22_rtc: 3000 mV
248[ 0.377004] axp22_aldo1: 700 <--> 3300 mV at 3000 mV
249[ 0.377004] axp22_aldo2: 700 <--> 3300 mV at 2500 mV
250[ 0.377004] axp22_aldo3: 700 <--> 3300 mV at 3000 mV
251[ 0.377004] axp22_dldo1: 700 <--> 3300 mV at 3300 mV
252[ 0.380025] axp22_dldo2: 700 <--> 3300 mV at 700 mV
253[ 0.380313] axp22_dldo3: 700 <--> 3300 mV at 700 mV
254[ 0.380313] axp22_dldo4: 700 <--> 3300 mV at 700 mV
255[ 0.380318] axp22_eldo1: 700 <--> 3300 mV at 3000 mV
256[ 0.380318] axp22_eldo1: supplied by axp22_dcdc1
257[ 0.380373] axp22_eldo2: 700 <--> 3300 mV at 1800 mV
258[ 0.380373] axp22_eldo2: supplied by axp22_dcdc1
259[ 0.380385] axp22_eldo3: 700 <--> 3300 mV at 700 mV
260[ 0.380385] axp22_eldo3: supplied by axp22_dcdc1
261[ 0.380447] axp22_dc5ldo: 700 <--> 1400 mV at 1100 mV
262[ 0.380447] axp22_ldoio0: 700 <--> 3300 mV at 3800 mV
263[ 0.383359] axp22_ldoio1: 700 <--> 3300 mV at 3800 mV
264[ 0.383625] axp22_dc1sw: at 700 mV
265[ 0.383625] axp22_dc1sw: supplied by axp22_dcdc1
266[ 0.383865] input: axp22-supplyer as /devices/platform/axp22_board/axp22-supp lyer.20/input/input0
267[ 0.387255] Advanced Linux Sound Architecture Driver Version 1.0.25.
268[ 0.388120] Bluetooth: Core ver 2.16
269[ 0.388221] NET: Registered protocol family 31
270[ 0.388231] Bluetooth: HCI device and connection manager initialized
271[ 0.388244] Bluetooth: HCI socket layer initialized
272[ 0.388254] Bluetooth: L2CAP socket layer initialized
273[ 0.388298] Bluetooth: SCO socket layer initialized
274[ 0.390281] Switching to clocksource arch_sys_counter
275[ 0.412186] [DISP]disp_module_init
276[ 0.412825] [DISP]disp_probe
277[ 0.413326] [DISP] OSAL_Pwm_request,line:12: OSAL_Pwm_request pwm 1 fail!
278[ 0.423841] [DISP] OSAL_Pwm_Set_Polarity,line:95: OSAL_Pwm_Set_Polarity, h andle is NULL!
279[ 0.423856] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NUL L!
280[ 0.424093] [DISP]Fb_Init
281[ 0.424395] [DISP] parser_disp_init_para,line:130: fetch script data disp_ init.screen2_output_type fail
282[ 0.424413] [DISP] parser_disp_init_para,line:147: fetch script data disp_ init.screen2_output_mode fail
283[ 0.424439] [DISP] parser_disp_init_para,line:208: fetch script data disp_ init.fb2_format fail
284[ 0.424454] [DISP] parser_disp_init_para,line:213: fetch script data disp_ init.fb2_scaler_mode_enable fail
285[ 0.424470] [DISP] parser_disp_init_para,line:218: fetch script data disp_ init.fb2_width fail
286[ 0.424485] [DISP] parser_disp_init_para,line:223: fetch script data disp_ init.fb2_height fail
287[ 0.433289] [DISP]disp_probe finish
288[ 0.433441] [DISP]capture_module_init
289[ 0.433921] [DISP]capture_probe
290[ 0.433986] [DISP]capture finish
291[ 0.433996] [DISP]disp_module_init finish
292[ 0.434006] [LCD]lcd_module_init
293[ 0.434640] [LCD]lcd_module_init finish
294[ 0.434648] [HDMI]ep952_module_init begin
295[ 0.499412] NET: Registered protocol family 2
296[ 0.511102] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
297[ 0.512210] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
298[ 0.512387] TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
299[ 0.512531] TCP: Hash tables configured (established 8192 bind 8192)
300[ 0.512542] TCP: reno registered
301[ 0.512554] UDP hash table entries: 128 (order: 0, 4096 bytes)
302[ 0.512651] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
303[ 0.513172] NET: Registered protocol family 1
304[ 0.514187] Trying to unpack rootfs image as initramfs...
305[ 1.343169] Freeing initrd memory: 10204K
306[ 1.343586] standby_mode = 1.
307[ 1.343594] wakeup src cnt is : 1.
308[ 1.343640] sunxi_reg_init enter
309[ 1.347633] squashfs: version 4.0 (2009/01/31) Phillip Lougher
310[ 1.347742] fuse init (API version 7.18)
311[ 1.348361] msgmni has been set to 490
312[ 1.349236] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 50)
313[ 1.349251] io scheduler noop registered
314[ 1.349260] io scheduler deadline registered
315[ 1.349354] io scheduler cfq registered (default)
316[ 1.349367] pwm module init!
317<[ 1.350899] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
318[ 1.462635] console [ttyS0] enabled
319[ 2.726087] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
320[ 2.734480] brd: module loaded
321[ 2.743271] loop: module loaded
322[ 2.748874] nbd: registered device at major 43
323[ 3.858610] nanda:
324[ 3.863237] nandb: unknown partition table
325[ 3.869226] nandc:
326[ 3.873688] nandd: unknown partition table
327[ 3.880418] nande: unknown partition table
328[ 3.887225] nandf: unknown partition table
329[ 3.893207] nandg: unknown partition table
330[ 3.898358] sunxi_hw_init: sunxi debug register driver init
331[ 3.906643] usbcore: registered new interface driver asix
332[ 3.912753] usbcore: registered new interface driver qf9700
333[ 3.919020] usbcore: registered new interface driver cdc_ether
334[ 3.925613] usbcore: registered new interface driver net1080
335[ 3.931987] usbcore: registered new interface driver rndis_host
336[ 3.938652] usbcore: registered new interface driver cdc_subset
337[ 3.945310] usbcore: registered new interface driver zaurus
338[ 3.951624] usbcore: registered new interface driver cdc_ncm
339[ 3.957920] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
340[ 3.985334] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EH CI) Driver
341[ 3.994361] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus num ber 1
342[ 4.003566] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
343[ 4.020034] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
344[ 4.027477] usb usb1: hdev->level=0
345[ 4.031364] hub 1-0:1.0: USB hub found
346[ 4.035552] hub 1-0:1.0: 1 port detected
347[ 4.040484] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
348[ 4.067491] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
349[ 4.076061] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus num ber 2
350[ 4.084517] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
351[ 4.148155] usb usb2: hdev->level=0
352[ 4.152040] hub 2-0:1.0: USB hub found
353[ 4.156226] hub 2-0:1.0: 1 port detected
354[ 4.161269] usbcore: registered new interface driver cdc_acm
355[ 4.167565] cdc_acm: USB Abstract Control Model driver for USB modems and ISD N adapters
356[ 4.176544] usbcore: registered new interface driver cdc_wdm
357[ 4.182837] Initializing USB Mass Storage driver...
358[ 4.188405] usbcore: registered new interface driver usb-storage
359[ 4.195083] USB Mass Storage support registered.
360[ 4.200453] usbcore: registered new interface driver usbserial
361[ 4.206937] usbserial: USB Serial Driver core
362[ 4.212343] file system registered
363[ 4.218006] android_usb gadget: Mass Storage Function, version: 2009/09/11
364[ 4.225664] android_usb gadget: Number of LUNs=3
365[ 4.230835] lun0: LUN: removable file: (no medium)
366[ 4.236258] lun1: LUN: removable file: (no medium)
367[ 4.241720] lun2: LUN: removable file: (no medium)
368[ 4.248072] android_usb gadget: android_usb ready
369[ 4.253898] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
370[ 4.260802] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
371[ 4.270958] usb usb3: hdev->level=0
372[ 4.274842] hub 3-0:1.0: USB hub found
373[ 4.279030] hub 3-0:1.0: 1 port detected
374[ 4.284928] input: sunxi-keyboard as /devices/virtual/input/input1
375[ 4.292159] usbcore: registered new interface driver xpad
376[ 4.299017] [RTC] WARNING: Rtc time will be wrong!!
377[ 4.304862] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
378[ 4.317156] axp22_dcdc1: Failed to create debugfs directory
379[ 4.324790] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
380[ 4.332057] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->sta rt 0x01c20ca0, res->end 0x01c20cbf
381[ 4.343327] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
382[ 4.346715] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
383[ 4.358209] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
384[ 4.364406] timeout_to_interv, line 167
385[ 4.368669] interv_to_timeout, line 189
386[ 4.372935] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual ti meout 16 sec
387[ 4.382439] axp22_dcdc3: Failed to create debugfs directory
388[ 4.391537] usbcore: registered new interface driver usbhid
389[ 4.397741] usbhid: USB HID core driver
390[ 4.407639] asoc: sndi2s0 <-> i2s0 mapping ok
391[ 4.414610] [ audio ] err:try to get audio_pa_ctrl failed!
392[ 4.420732] sunxi-pcm-codec: probe of sunxi-pcm-codec failed with error -14
393[ 4.429377] Error: Driver 'switch-gpio' is already registered, aborting...
394[ 4.437028] oprofile: hardware counters not available
395[ 4.442642] oprofile: using timer interrupt.
396[ 4.448031] TCP: cubic registered
397[ 4.452073] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
398[ 4.460612] ThumbEE CPU extension supported.
399[ 4.465383] Registering SWP/SWPB emulation handler
400[ 4.472297] axp22_dc5ldo: incomplete constraints, leaving on
401[ 4.478745] axp22_eldo2: incomplete constraints, leaving on
402[ 4.485062] axp22_eldo1: incomplete constraints, leaving on
403[ 4.491557] axp22_dldo1: incomplete constraints, leaving on
404[ 4.497880] axp22_aldo3: incomplete constraints, leaving on
405[ 4.504176] axp22_aldo2: incomplete constraints, leaving on
406[ 4.510512] axp22_aldo1: incomplete constraints, leaving on
407[ 4.510680] usb 1-1: hdev->level=1
408[ 4.510689] hub 1-1:1.0: USB hub found
409[ 4.524666] hub 1-1:1.0: 4 ports detected
410[ 4.524782] axp22_dcdc5: incomplete constraints, leaving on
411[ 4.524881] axp22_dcdc3: incomplete constraints, leaving on
412[ 4.524934] axp22_dcdc2: incomplete constraints, leaving on
413[ 4.525833] input: gpio-keys as /devices/platform/gpio-keys.0/input/input2
414[ 4.526344] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
415[ 4.526397] ths_fetch_sysconfig_para: type err device_used = 1.
416[ 4.526757] input: sunxi-ths as /devices/virtual/input/input3
417[ 4.527242] suxi_ths: Kernel Thermal management registered
418[ 4.527460] fetch C0_LV_count from sysconfig failed
419[ 4.528129] CPU Budget:Register notifier
420[ 4.528140] CPU Budget:register Success
421[ 4.528149] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registe red: thermal-budget-0
422[ 4.533172] ALSA device list:
423[ 4.533183] #0: sndi2s0
424[ 4.613140] Freeing init memory: 272K
425/dev/by-name/rootfs_data: UUID="cf9b06e3-8740-4644-9256-312f3cab2806" TYPE="ext4 "
426/dev/by-name/rootfs_data already format by ext4
427/dev/by-name/misc: UUID="8c9c68b5-b1a7-43f1-ae33-9f4dd981bd81" TYPE="ext4"
428/dev/by-name/misc already format by ext4
429e2fsck 1.42.13 (17-May-2015)
430/dev/nande: recovering journal
431/dev/nande: clean, 14/45056 files, 12597/180224 blocks
432e2fsck 1.42.13 (17-May-2015)
433/dev/nandf: recovering journal
434/dev/nandf: clean, 13/1024 files, 1186/4096 blocks
435[ 4.833317] EXT4-fs (nandf): mounted filesystem with ordered data mode. Opts: (null)
436Starting logging: OK
437Populating /dev using udev: [ 4.912141] udevd[99]: starting version 3.1.5
438done
439Initializing random number generator... done.
440Starting dropbear sshd: OK
441mali: starting driver
442[ 5.464918] Get mali parameter successfully
443[ 5.469686] Init Mali gpu successfully
444mode: 0
445automatic mode: display don't support 720p and 480p. 720p mode selected
446[ 5.512513] [LCD]open, step 0 finish
447[ 5.616726] [LCD]open, step 1 finish
448[ 5.633405] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NUL L!
449[ 5.636694] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NUL L!
450[ 5.649687] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NUL L!
451[ 5.723369] [LCD]open, step 2 finish
452[ 5.730200] [LCD]open, step 3 finish
453OK
454[PROJECT LUNAR](INFO) Enabling R[ 5.749211] rndis_function_bind_config MAC: 0 0:00:00:00:00:00
455DNIS Service...
456[ 5.757895] android_usb gadget: using random self ethernet address
457[ 5.766221] android_usb gadget: using random host ethernet address
458[ 5.774140] rndis0: MAC ae:3b:fa:ce:2a:cd
459[ 5.778689] rndis0: HOST MAC 5a:96:77:10:ce:76
460[PROJECT LUNAR](INFO) Mounting partitions...
461[ 6.094021] EXT2-fs (nandd): error: couldn't mount because of unsupported opt ional features (44)
462[ 6.133860] EXT4-fs (nandd): couldn't mount as ext3 due to feature incompatib ilities
463[ 6.195000] EXT4-fs (nandd): recovery complete
464[ 6.199972] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: (null)
465[ 6.219742] EXT2-fs (nande): error: couldn't mount because of unsupported opt ional features (240)
466[ 6.267039] EXT4-fs (nande): couldn't mount as ext3 due to feature incompatib ilities
467[ 6.306906] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: (null)
468[ 6.327661] EXT2-fs (nandf): error: couldn't mount because of unsupported opt ional features (240)
469[ 6.377091] EXT4-fs (nandf): couldn't mount as ext3 due to feature incompatib ilities
470[ 6.405817] EXT4-fs (nandf): mounted filesystem with ordered data mode. Opts: (null)
471mount: mounting /dev/nandg on /tmp/mount/nandg failed: Invalid argument
472
473Welcome to VividOS
474PL-RecovStaging login: [ 7.031911] android_usb gadget: high-speed config #1: android
475[ 219.714997] EXT4-fs (nandd): re-mounted. Opts: errors=remount-ro,data=ordered
476[ 220.592011] EXT2-fs (nandg): error: couldn't mount because of unsupported optional features (240)
477[ 220.623723] EXT4-fs (nandg): couldn't mount as ext3 due to feature incompatibilities
478[ 220.656129] EXT4-fs (nandg): mounted filesystem with ordered data mode. Opts: (null)
479[PROJECT LUNAR](INFO) Disabling RDNIS Service...
480[PROJECT LUNAR](INFO) Unmounting partitions...
481umount: can't unmount /tmp/mount/nandc: Invalid argument
482mali: stopping driver
483Stopping dropbear sshd: OK
484Saving random seed... done.
485Stopping logging: OK
486umount: tmpfs busy - remounted read-only
487Sent SIGKILL to all processes
488Requesting system reboot
489[ 236.604159] CPU1: shutdown
490[ 236.607241] [hotplug]: cpu(3) try to kill cpu(1)
491[ 236.612430] [hotplug]: cpu1 is killed! .
492[ 236.621129] CPU2: shutdown
493[ 236.624253] [hotplug]: cpu(3) try to kill cpu(2)
494[ 236.629474] [hotplug]: cpu2 is killed! .
495[ 236.638778] CPU3: shutdown
496[ 236.641945] [hotplug]: cpu(0) try to kill cpu(3)
497[ 236.647304] [hotplug]: cpu3 is killed! .
498[ 236.654284] wdt_enable, write reg 0xf1c20cb8 val 0x000000b0
499[ 236.783333] [LCD]close, step 0 finish
500[ 236.790006] [LCD]close, step 1 finish
501[ 236.798210] [LCD]close, step 2 finish
502[ 236.933474] [LCD]close, step 3 finish
503[ 236.943653] Restarting system.
504[ 236.947083] Restarting Linux version 3.4.113 (root@runner-0277ea0f-project-14662438-concurrent-0) (gcc version 5.5.0 (Linaro GCC 5.5-2017.10) ) #1 SMP PREEMPT Tue Nov 5 05:29:04 UTC 2019
505[ 236.947095]
506▒[ 0.277]
507
508U-Boot 2011.09-rc1-00000-g0721a56-dirty (Jun 18 2019 - 05:33:45) Allwinner Technology
509
510[ 0.287]version: 1.1.0
511[ 0.289]uboot commit : 0721a5646a0c77acb3c583af3dcaa4975db462ce
512
513ready
514normal dc exist, limit to dc
515no key input
516dram_para_set start
517dram_para_set end
518In: Out: Err: Net: Warning: failed to set MAC address
519
520
521 Verifying Checksum ... OK
522OK
523OK
524Uncompressing Linux... done, booting the kernel.
525[sun8i_fixup]: From boot, get meminfo:
526 Start: 0x40000000
527 Size: 256MB
528early_ion_cma_512m: ion reserve: [0x46a00000, 0x50000000]!
529ion_cma_512m reserve: 150m!
530ion_cma_1g reserve: 176m!
531ion_carveout_512m reserve: 96m!
532ion_carveout_1g reserve: 150m!
533<7<<7/dev/by-name/rootfs_data: UUID="cf9b06e3-8740-4644-9256-312f3cab2806" TYPE="ext4"
534/dev/by-name/rootfs_data already format by ext4
535/dev/by-name/misc: UUID="8c9c68b5-b1a7-43f1-ae33-9f4dd981bd81" TYPE="ext4"
536/dev/by-name/misc already format by ext4
537e2fsck 1.42.13 (17-May-2015)
538/dev/nande: clean, 12/45056 files, 11335/180224 blocks
539e2fsck 1.42.13 (17-May-2015)
540/dev/nandf: clean, 13/1024 files, 1186/4096 blocks
541release-moon-1f2365d:MOON-mass
542Starting logging: OK
543Populating /dev using udev: done
544Initializing random number generator... done.
545Starting dropbear sshd: OK
546mali: starting driver
547mode: 0
548automatic mode: display don't support 720p and 480p. 720p mode selected
549OK
550[PROJECT LUNAR](PREINIT) Generating Unique Project Lunar console ID...
551[PROJECT LUNAR](PREINIT) Injecting default Project Lunar config...
552[PROJECT LUNAR](PREINIT) Injecting default retroarch config...
553Could not create /usr/local/var/lib/dbus/machine-id.kZW2oI05: No such file or directory
554ALSA lib pcm.c:7963:(snd_pcm_recover) underrun occurred