· 5 years ago · Feb 08, 2021, 09:54 PM
1[ 0.000000] Linux version 5.4.73-1-pve (build@pve) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PVE 5.4.73-1 (Mon, 16 Nov 2020 10:52:16 +0100) ()
2[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.73-1-pve root=/dev/mapper/pve-root ro quiet amd_iommu=on iommu=pt nofb nomodeset video=efifb:off
3[ 0.000000] KERNEL supported cpus:
4[ 0.000000] Intel GenuineIntel
5[ 0.000000] AMD AuthenticAMD
6[ 0.000000] Hygon HygonGenuine
7[ 0.000000] Centaur CentaurHauls
8[ 0.000000] zhaoxin Shanghai
9[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
10[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
11[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
12[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
13[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
14[ 0.000000] BIOS-provided physical RAM map:
15[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
16[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000008ffff] usable
17[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000090fff] type 20
18[ 0.000000] BIOS-e820: [mem 0x0000000000091000-0x000000000009ffff] usable
19[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
20[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable
21[ 0.000000] BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff] reserved
22[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
23[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
24[ 0.000000] BIOS-e820: [mem 0x000000000a210000-0x000000000affffff] usable
25[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
26[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x000000008a59bfff] usable
27[ 0.000000] BIOS-e820: [mem 0x000000008a59c000-0x000000008a59cfff] reserved
28[ 0.000000] BIOS-e820: [mem 0x000000008a59d000-0x000000008a5fffff] usable
29[ 0.000000] BIOS-e820: [mem 0x000000008a600000-0x000000008a600fff] reserved
30[ 0.000000] BIOS-e820: [mem 0x000000008a601000-0x00000000ca2bffff] usable
31[ 0.000000] BIOS-e820: [mem 0x00000000ca2c0000-0x00000000ca5ecfff] reserved
32[ 0.000000] BIOS-e820: [mem 0x00000000ca5ed000-0x00000000ca639fff] ACPI data
33[ 0.000000] BIOS-e820: [mem 0x00000000ca63a000-0x00000000cacd8fff] ACPI NVS
34[ 0.000000] BIOS-e820: [mem 0x00000000cacd9000-0x00000000cbb63fff] reserved
35[ 0.000000] BIOS-e820: [mem 0x00000000cbb64000-0x00000000cbbfefff] type 20
36[ 0.000000] BIOS-e820: [mem 0x00000000cbbff000-0x00000000ccffffff] usable
37[ 0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
38[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
39[ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
40[ 0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd7fffff] reserved
41[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
42[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
43[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
44[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
45[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
46[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
47[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
48[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
49[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
50[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
51[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082f37ffff] usable
52[ 0.000000] BIOS-e820: [mem 0x000000082f380000-0x000000082fffffff] reserved
53[ 0.000000] NX (Execute Disable) protection: active
54[ 0.000000] efi: EFI v2.70 by American Megatrends
55[ 0.000000] efi: ACPI=0xca639000 ACPI 2.0=0xca639014 SMBIOS=0xcba0d000 SMBIOS 3.0=0xcba0c000 MEMATTR=0xc7257018 ESRT=0xc7340918
56[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
57[ 0.000000] SMBIOS 3.3.0 present.
58[ 0.000000] DMI: System manufacturer System Product Name/PRIME X470-PRO, BIOS 5809 12/03/2020
59[ 0.000000] tsc: Fast TSC calibration using PIT
60[ 0.000000] tsc: Detected 3593.307 MHz processor
61[ 0.000016] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
62[ 0.000017] e820: remove [mem 0x000a0000-0x000fffff] usable
63[ 0.000023] last_pfn = 0x82f380 max_arch_pfn = 0x400000000
64[ 0.000026] MTRR default type: uncachable
65[ 0.000026] MTRR fixed ranges enabled:
66[ 0.000027] 00000-9FFFF write-back
67[ 0.000027] A0000-BFFFF write-through
68[ 0.000028] C0000-DFFFF uncachable
69[ 0.000028] E0000-FFFFF write-protect
70[ 0.000028] MTRR variable ranges enabled:
71[ 0.000029] 0 base 000000000000 mask FFFF80000000 write-back
72[ 0.000030] 1 base 000080000000 mask FFFFC0000000 write-back
73[ 0.000030] 2 base 0000C0000000 mask FFFFF0000000 write-back
74[ 0.000031] 3 base 0000CB100000 mask FFFFFFFF0000 uncachable
75[ 0.000031] 4 disabled
76[ 0.000031] 5 disabled
77[ 0.000032] 6 disabled
78[ 0.000032] 7 disabled
79[ 0.000032] TOM2: 0000000830000000 aka 33536M
80[ 0.000619] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
81[ 0.000686] total RAM covered: 3327M
82[ 0.000821] Found optimal setting for mtrr clean up
83[ 0.000822] gran_size: 64K chunk_size: 128M num_reg: 4 lose cover RAM: 0G
84[ 0.000898] e820: update [mem 0xcb100000-0xcb10ffff] usable ==> reserved
85[ 0.000899] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
86[ 0.000902] last_pfn = 0xcd000 max_arch_pfn = 0x400000000
87[ 0.004147] esrt: Reserving ESRT space from 0x00000000c7340918 to 0x00000000c7340950.
88[ 0.004151] e820: update [mem 0xc7340000-0xc7340fff] usable ==> reserved
89[ 0.004168] check: Scanning 1 areas for low memory corruption
90[ 0.004171] Using GB pages for direct mapping
91[ 0.005353] secureboot: Secure boot could not be determined (mode 0)
92[ 0.005353] RAMDISK: [mem 0x32e8d000-0x3573dfff]
93[ 0.005358] ACPI: Early table checksum verification disabled
94[ 0.005361] ACPI: RSDP 0x00000000CA639014 000024 (v02 ALASKA)
95[ 0.005363] ACPI: XSDT 0x00000000CA638728 0000B4 (v01 ALASKA A M I 01072009 AMI 01000013)
96[ 0.005367] ACPI: FACP 0x00000000CA631000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
97[ 0.005370] ACPI: DSDT 0x00000000CA621000 00F311 (v02 ALASKA A M I 01072009 INTL 20120913)
98[ 0.005372] ACPI: FACS 0x00000000CACBE000 000040
99[ 0.005373] ACPI: SSDT 0x00000000CA637000 00092A (v02 AMD AmdTable 00000002 MSFT 04000000)
100[ 0.005375] ACPI: SSDT 0x00000000CA633000 003BD7 (v01 AMD AMD AOD 00000001 INTL 20120913)
101[ 0.005377] ACPI: SSDT 0x00000000CA632000 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
102[ 0.005378] ACPI: FIDT 0x00000000CA620000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
103[ 0.005380] ACPI: FPDT 0x00000000CA5FC000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
104[ 0.005382] ACPI: MCFG 0x00000000CA61E000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
105[ 0.005383] ACPI: HPET 0x00000000CA61D000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
106[ 0.005385] ACPI: IVRS 0x00000000CA61B000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000000)
107[ 0.005386] ACPI: VFCT 0x00000000CA60A000 010084 (v01 ALASKA A M I 00000001 AMD 31504F47)
108[ 0.005388] ACPI: BGRT 0x00000000CA609000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
109[ 0.005389] ACPI: PCCT 0x00000000CA608000 00006E (v02 AMD AmdTable 00000001 AMD 00000000)
110[ 0.005391] ACPI: SSDT 0x00000000CA605000 002A49 (v02 AMD AmdTable 00000001 AMD 00000001)
111[ 0.005392] ACPI: CRAT 0x00000000CA604000 000B58 (v01 AMD AmdTable 00000001 AMD 00000001)
112[ 0.005394] ACPI: CDIT 0x00000000CA603000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
113[ 0.005395] ACPI: SSDT 0x00000000CA5FF000 00381A (v01 AMD MYRTLE 00000001 INTL 20120913)
114[ 0.005397] ACPI: SSDT 0x00000000CA5FE000 0000BF (v01 AMD AmdTable 00001000 INTL 20120913)
115[ 0.005399] ACPI: APIC 0x00000000CA5FD000 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
116[ 0.005404] ACPI: Local APIC address 0xfee00000
117[ 0.005489] No NUMA configuration found
118[ 0.005490] Faking a node at [mem 0x0000000000000000-0x000000082f37ffff]
119[ 0.005496] NODE_DATA(0) allocated [mem 0x82f355000-0x82f37ffff]
120[ 0.005659] Zone ranges:
121[ 0.005659] DMA [mem 0x0000000000001000-0x0000000000ffffff]
122[ 0.005660] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
123[ 0.005660] Normal [mem 0x0000000100000000-0x000000082f37ffff]
124[ 0.005661] Device empty
125[ 0.005661] Movable zone start for each node
126[ 0.005663] Early memory node ranges
127[ 0.005664] node 0: [mem 0x0000000000001000-0x000000000008ffff]
128[ 0.005665] node 0: [mem 0x0000000000091000-0x000000000009ffff]
129[ 0.005665] node 0: [mem 0x0000000000100000-0x0000000009bfefff]
130[ 0.005665] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
131[ 0.005666] node 0: [mem 0x000000000a210000-0x000000000affffff]
132[ 0.005666] node 0: [mem 0x000000000b020000-0x000000008a59bfff]
133[ 0.005666] node 0: [mem 0x000000008a59d000-0x000000008a5fffff]
134[ 0.005667] node 0: [mem 0x000000008a601000-0x00000000ca2bffff]
135[ 0.005667] node 0: [mem 0x00000000cbbff000-0x00000000ccffffff]
136[ 0.005667] node 0: [mem 0x0000000100000000-0x000000082f37ffff]
137[ 0.005773] Zeroed struct page in unavailable ranges: 23124 pages
138[ 0.005774] Initmem setup node 0 [mem 0x0000000000001000-0x000000082f37ffff]
139[ 0.005775] On node 0 totalpages: 8365484
140[ 0.005776] DMA zone: 64 pages used for memmap
141[ 0.005776] DMA zone: 26 pages reserved
142[ 0.005776] DMA zone: 3998 pages, LIFO batch:0
143[ 0.005812] DMA32 zone: 12939 pages used for memmap
144[ 0.005813] DMA32 zone: 828046 pages, LIFO batch:63
145[ 0.013706] Normal zone: 117710 pages used for memmap
146[ 0.013707] Normal zone: 7533440 pages, LIFO batch:63
147[ 0.078413] ACPI: PM-Timer IO Port: 0x808
148[ 0.078416] ACPI: Local APIC address 0xfee00000
149[ 0.078421] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
150[ 0.078432] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
151[ 0.078437] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
152[ 0.078438] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
153[ 0.078439] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
154[ 0.078440] ACPI: IRQ0 used by override.
155[ 0.078441] ACPI: IRQ9 used by override.
156[ 0.078442] Using ACPI (MADT) for SMP configuration information
157[ 0.078443] ACPI: HPET id: 0x10228201 base: 0xfed00000
158[ 0.078450] e820: update [mem 0xc6cf9000-0xc6d3efff] usable ==> reserved
159[ 0.078459] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
160[ 0.078491] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
161[ 0.078492] PM: Registered nosave memory: [mem 0x00090000-0x00090fff]
162[ 0.078493] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
163[ 0.078494] PM: Registered nosave memory: [mem 0x09bff000-0x09ffffff]
164[ 0.078495] PM: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
165[ 0.078496] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
166[ 0.078498] PM: Registered nosave memory: [mem 0x8a59c000-0x8a59cfff]
167[ 0.078499] PM: Registered nosave memory: [mem 0x8a600000-0x8a600fff]
168[ 0.078500] PM: Registered nosave memory: [mem 0xc6cf9000-0xc6d3efff]
169[ 0.078501] PM: Registered nosave memory: [mem 0xc7340000-0xc7340fff]
170[ 0.078503] PM: Registered nosave memory: [mem 0xca2c0000-0xca5ecfff]
171[ 0.078503] PM: Registered nosave memory: [mem 0xca5ed000-0xca639fff]
172[ 0.078503] PM: Registered nosave memory: [mem 0xca63a000-0xcacd8fff]
173[ 0.078503] PM: Registered nosave memory: [mem 0xcacd9000-0xcbb63fff]
174[ 0.078504] PM: Registered nosave memory: [mem 0xcbb64000-0xcbbfefff]
175[ 0.078505] PM: Registered nosave memory: [mem 0xcd000000-0xcfffffff]
176[ 0.078505] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
177[ 0.078506] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
178[ 0.078506] PM: Registered nosave memory: [mem 0xfc000000-0xfd1fffff]
179[ 0.078506] PM: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
180[ 0.078506] PM: Registered nosave memory: [mem 0xfd300000-0xfd5fffff]
181[ 0.078507] PM: Registered nosave memory: [mem 0xfd600000-0xfd7fffff]
182[ 0.078507] PM: Registered nosave memory: [mem 0xfd800000-0xfe9fffff]
183[ 0.078507] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
184[ 0.078508] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
185[ 0.078508] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
186[ 0.078508] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
187[ 0.078508] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
188[ 0.078509] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
189[ 0.078509] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
190[ 0.078509] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
191[ 0.078509] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
192[ 0.078510] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
193[ 0.078510] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
194[ 0.078510] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
195[ 0.078511] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
196[ 0.078511] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
197[ 0.078511] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
198[ 0.078511] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
199[ 0.078512] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
200[ 0.078512] PM: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
201[ 0.078512] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
202[ 0.078514] [mem 0xd0000000-0xf7ffffff] available for PCI devices
203[ 0.078514] Booting paravirtualized kernel on bare hardware
204[ 0.078517] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
205[ 0.078522] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
206[ 0.079299] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
207[ 0.079305] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
208[ 0.079306] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
209[ 0.079308] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
210[ 0.079337] Built 1 zonelists, mobility grouping on. Total pages: 8234745
211[ 0.079337] Policy zone: Normal
212[ 0.079338] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.73-1-pve root=/dev/mapper/pve-root ro quiet amd_iommu=on iommu=pt nofb nomodeset video=efifb:off
213[ 0.079405] You have booted with nomodeset. This means your GPU drivers are DISABLED
214[ 0.079405] Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
215[ 0.079405] Unless you actually understand what nomodeset does, you should reboot without enabling it
216[ 0.081578] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
217[ 0.082645] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
218[ 0.082709] mem auto-init: stack:off, heap alloc:on, heap free:off
219[ 0.087094] Calgary: detecting Calgary via BIOS EBDA area
220[ 0.087095] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
221[ 0.129309] Memory: 32649988K/33461936K available (14339K kernel code, 2394K rwdata, 4956K rodata, 2704K init, 5004K bss, 811948K reserved, 0K cma-reserved)
222[ 0.129315] random: get_random_u64 called from __kmem_cache_create+0x42/0x530 with crng_init=0
223[ 0.129431] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
224[ 0.129442] ftrace: allocating 44382 entries in 174 pages
225[ 0.140100] rcu: Hierarchical RCU implementation.
226[ 0.140101] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
227[ 0.140101] Tasks RCU enabled.
228[ 0.140102] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
229[ 0.140102] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
230[ 0.141920] NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
231[ 0.142204] random: crng done (trusting CPU's manufacturer)
232[ 0.142225] Console: colour dummy device 80x25
233[ 0.142228] printk: console [tty0] enabled
234[ 0.142241] ACPI: Core revision 20190816
235[ 0.142382] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
236[ 0.142396] APIC: Switch to symmetric I/O mode setup
237[ 0.461448] Switched APIC routing to physical flat.
238[ 0.462048] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
239[ 0.478388] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33cba13a8ba, max_idle_ns: 440795389433 ns
240[ 0.478390] Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.61 BogoMIPS (lpj=14373228)
241[ 0.478391] pid_max: default: 32768 minimum: 301
242[ 0.479631] efi: memattr: Entry attributes invalid: RO and XP bits both cleared
243[ 0.479633] efi: memattr: ! 0x000000090000-0x000000090fff [Runtime Code |RUN| | | | | | | | | | | ]
244[ 0.479956] LSM: Security Framework initializing
245[ 0.479961] Yama: becoming mindful.
246[ 0.480029] AppArmor: AppArmor initialized
247[ 0.480089] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
248[ 0.480125] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
249[ 0.480134] *** VALIDATE tmpfs ***
250[ 0.480232] *** VALIDATE proc ***
251[ 0.480270] *** VALIDATE cgroup1 ***
252[ 0.480271] *** VALIDATE cgroup2 ***
253[ 0.480297] x86/cpu: User Mode Instruction Prevention (UMIP) activated
254[ 0.480334] LVT offset 1 assigned for vector 0xf9
255[ 0.480461] LVT offset 2 assigned for vector 0xf4
256[ 0.480497] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
257[ 0.480497] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
258[ 0.480498] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
259[ 0.480499] Spectre V2 : Mitigation: Full AMD retpoline
260[ 0.480500] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
261[ 0.480501] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
262[ 0.480501] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
263[ 0.480502] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
264[ 0.480657] Freeing SMP alternatives memory: 40K
265[ 0.592214] smpboot: CPU0: AMD Ryzen 5 3600 6-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
266[ 0.592284] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
267[ 0.592286] ... version: 0
268[ 0.592286] ... bit width: 48
269[ 0.592287] ... generic registers: 6
270[ 0.592287] ... value mask: 0000ffffffffffff
271[ 0.592287] ... max period: 00007fffffffffff
272[ 0.592287] ... fixed-purpose events: 0
273[ 0.592288] ... event mask: 000000000000003f
274[ 0.592316] rcu: Hierarchical SRCU implementation.
275[ 0.592642] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
276[ 0.592776] smp: Bringing up secondary CPUs ...
277[ 0.592828] x86: Booting SMP configuration:
278[ 0.592829] .... node #0, CPUs: #1
279[ 0.316293] do_IRQ: 1.55 No irq handler for vector
280[ 0.594389] #2
281[ 0.316293] do_IRQ: 2.55 No irq handler for vector
282[ 0.594444] #3
283[ 0.316293] do_IRQ: 3.55 No irq handler for vector
284[ 0.596579] #4
285[ 0.316293] do_IRQ: 4.55 No irq handler for vector
286[ 0.598439] #5
287[ 0.316293] do_IRQ: 5.55 No irq handler for vector
288[ 0.602446] #6
289[ 0.316293] do_IRQ: 6.55 No irq handler for vector
290[ 0.604610] #7
291[ 0.316293] do_IRQ: 7.55 No irq handler for vector
292[ 0.606446] #8
293[ 0.316293] do_IRQ: 8.55 No irq handler for vector
294[ 0.608542] #9
295[ 0.316293] do_IRQ: 9.55 No irq handler for vector
296[ 0.610443] #10
297[ 0.316293] do_IRQ: 10.55 No irq handler for vector
298[ 0.612578] #11
299[ 0.614414] smp: Brought up 1 node, 12 CPUs
300[ 0.614414] smpboot: Max logical packages: 3
301[ 0.614414] smpboot: Total of 12 processors activated (86239.36 BogoMIPS)
302[ 0.615183] devtmpfs: initialized
303[ 0.615183] x86/mm: Memory block size: 128MB
304[ 0.619289] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20ffff] (65536 bytes)
305[ 0.619289] PM: Registering ACPI NVS region [mem 0xca63a000-0xcacd8fff] (6942720 bytes)
306[ 0.619289] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
307[ 0.619289] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
308[ 0.619289] pinctrl core: initialized pinctrl subsystem
309[ 0.619289] PM: RTC time: 20:28:04, date: 2021-02-08
310[ 0.619289] NET: Registered protocol family 16
311[ 0.619289] audit: initializing netlink subsys (disabled)
312[ 0.619289] audit: type=2000 audit(1612816084.164:1): state=initialized audit_enabled=0 res=1
313[ 0.619289] EISA bus registered
314[ 0.619289] cpuidle: using governor ladder
315[ 0.619289] cpuidle: using governor menu
316[ 0.619289] Detected 1 PCC Subspaces
317[ 0.619289] Registering PCC driver as Mailbox controller
318[ 0.619289] ACPI: bus type PCI registered
319[ 0.619289] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
320[ 0.619289] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
321[ 0.619289] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
322[ 0.619289] PCI: Using configuration type 1 for base access
323[ 0.619985] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
324[ 0.619985] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
325[ 0.622427] fbcon: Taking over console
326[ 0.622454] ACPI: Added _OSI(Module Device)
327[ 0.622454] ACPI: Added _OSI(Processor Device)
328[ 0.622455] ACPI: Added _OSI(3.0 _SCP Extensions)
329[ 0.622455] ACPI: Added _OSI(Processor Aggregator Device)
330[ 0.622456] ACPI: Added _OSI(Linux-Dell-Video)
331[ 0.622456] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
332[ 0.622457] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
333[ 0.628834] ACPI: 7 ACPI AML tables successfully acquired and loaded
334[ 0.629911] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
335[ 0.630484] ACPI: EC: EC started
336[ 0.630484] ACPI: EC: interrupt blocked
337[ 0.630547] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
338[ 0.630549] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
339[ 0.630549] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
340[ 0.630549] ACPI: Interpreter enabled
341[ 0.630560] ACPI: (supports S0 S3 S4 S5)
342[ 0.630561] ACPI: Using IOAPIC for interrupt routing
343[ 0.630878] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
344[ 0.631080] ACPI: Enabled 4 GPEs in block 00 to 1F
345[ 0.637797] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
346[ 0.637800] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
347[ 0.637945] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
348[ 0.638083] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
349[ 0.638091] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
350[ 0.638366] PCI host bridge to bus 0000:00
351[ 0.638368] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
352[ 0.638368] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
353[ 0.638369] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
354[ 0.638369] pci_bus 0000:00: root bus resource [io 0x0d00-0xefff window]
355[ 0.638370] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
356[ 0.638371] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
357[ 0.638371] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfcffffff window]
358[ 0.638372] pci_bus 0000:00: root bus resource [mem 0x830000000-0x7fffffffff window]
359[ 0.638373] pci_bus 0000:00: root bus resource [bus 00-ff]
360[ 0.638379] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
361[ 0.638469] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
362[ 0.638568] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
363[ 0.638639] pci 0000:00:01.3: [1022:1483] type 01 class 0x060400
364[ 0.638676] pci 0000:00:01.3: enabling Extended Tags
365[ 0.638728] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
366[ 0.638823] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
367[ 0.638895] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
368[ 0.638961] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
369[ 0.639036] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
370[ 0.639117] pci 0000:00:03.2: [1022:1483] type 01 class 0x060400
371[ 0.639191] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
372[ 0.639274] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
373[ 0.639345] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
374[ 0.639419] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
375[ 0.639485] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
376[ 0.639513] pci 0000:00:07.1: enabling Extended Tags
377[ 0.639549] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
378[ 0.639631] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
379[ 0.639698] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
380[ 0.639728] pci 0000:00:08.1: enabling Extended Tags
381[ 0.639767] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
382[ 0.639868] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
383[ 0.639988] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
384[ 0.640109] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
385[ 0.640155] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
386[ 0.640200] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
387[ 0.640245] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
388[ 0.640290] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
389[ 0.640335] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
390[ 0.640380] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
391[ 0.640426] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
392[ 0.640528] pci 0000:01:00.0: [1022:43d0] type 00 class 0x0c0330
393[ 0.640555] pci 0000:01:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit]
394[ 0.640599] pci 0000:01:00.0: enabling Extended Tags
395[ 0.640655] pci 0000:01:00.0: PME# supported from D3hot D3cold
396[ 0.640730] pci 0000:01:00.1: [1022:43c8] type 00 class 0x010601
397[ 0.640786] pci 0000:01:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff]
398[ 0.640794] pci 0000:01:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref]
399[ 0.640801] pci 0000:01:00.1: enabling Extended Tags
400[ 0.640845] pci 0000:01:00.1: PME# supported from D3hot D3cold
401[ 0.640902] pci 0000:01:00.2: [1022:43c6] type 01 class 0x060400
402[ 0.640954] pci 0000:01:00.2: enabling Extended Tags
403[ 0.641004] pci 0000:01:00.2: PME# supported from D3hot D3cold
404[ 0.641102] pci 0000:00:01.3: PCI bridge to [bus 01-07]
405[ 0.641106] pci 0000:00:01.3: bridge window [io 0xe000-0xefff]
406[ 0.641108] pci 0000:00:01.3: bridge window [mem 0xfcb00000-0xfcdfffff]
407[ 0.641195] pci 0000:02:00.0: [1022:43c7] type 01 class 0x060400
408[ 0.641253] pci 0000:02:00.0: enabling Extended Tags
409[ 0.641314] pci 0000:02:00.0: PME# supported from D3hot D3cold
410[ 0.641393] pci 0000:02:04.0: [1022:43c7] type 01 class 0x060400
411[ 0.641451] pci 0000:02:04.0: enabling Extended Tags
412[ 0.641512] pci 0000:02:04.0: PME# supported from D3hot D3cold
413[ 0.641588] pci 0000:02:06.0: [1022:43c7] type 01 class 0x060400
414[ 0.641646] pci 0000:02:06.0: enabling Extended Tags
415[ 0.641707] pci 0000:02:06.0: PME# supported from D3hot D3cold
416[ 0.641783] pci 0000:02:07.0: [1022:43c7] type 01 class 0x060400
417[ 0.641841] pci 0000:02:07.0: enabling Extended Tags
418[ 0.641901] pci 0000:02:07.0: PME# supported from D3hot D3cold
419[ 0.641982] pci 0000:02:09.0: [1022:43c7] type 01 class 0x060400
420[ 0.642040] pci 0000:02:09.0: enabling Extended Tags
421[ 0.642100] pci 0000:02:09.0: PME# supported from D3hot D3cold
422[ 0.642187] pci 0000:01:00.2: PCI bridge to [bus 02-07]
423[ 0.642192] pci 0000:01:00.2: bridge window [io 0xe000-0xefff]
424[ 0.642194] pci 0000:01:00.2: bridge window [mem 0xfcb00000-0xfccfffff]
425[ 0.642239] pci 0000:02:00.0: PCI bridge to [bus 03]
426[ 0.642310] pci 0000:04:00.0: [1b21:1242] type 00 class 0x0c0330
427[ 0.642354] pci 0000:04:00.0: reg 0x10: [mem 0xfcc00000-0xfcc07fff 64bit]
428[ 0.642432] pci 0000:04:00.0: enabling Extended Tags
429[ 0.642539] pci 0000:04:00.0: PME# supported from D3hot D3cold
430[ 0.642681] pci 0000:02:04.0: PCI bridge to [bus 04]
431[ 0.642688] pci 0000:02:04.0: bridge window [mem 0xfcc00000-0xfccfffff]
432[ 0.642732] pci 0000:02:06.0: PCI bridge to [bus 05]
433[ 0.642811] pci 0000:06:00.0: [8086:1539] type 00 class 0x020000
434[ 0.642859] pci 0000:06:00.0: reg 0x10: [mem 0xfcb00000-0xfcb1ffff]
435[ 0.642894] pci 0000:06:00.0: reg 0x18: [io 0xe000-0xe01f]
436[ 0.642912] pci 0000:06:00.0: reg 0x1c: [mem 0xfcb20000-0xfcb23fff]
437[ 0.643102] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
438[ 0.643250] pci 0000:02:07.0: PCI bridge to [bus 06]
439[ 0.643255] pci 0000:02:07.0: bridge window [io 0xe000-0xefff]
440[ 0.643258] pci 0000:02:07.0: bridge window [mem 0xfcb00000-0xfcbfffff]
441[ 0.643296] pci 0000:02:09.0: PCI bridge to [bus 07]
442[ 0.643373] pci 0000:08:00.0: [1002:679a] type 00 class 0x030000
443[ 0.643395] pci 0000:08:00.0: reg 0x10: [mem 0x7e00000000-0x7effffffff 64bit pref]
444[ 0.643404] pci 0000:08:00.0: reg 0x18: [mem 0xfcf00000-0xfcf3ffff 64bit]
445[ 0.643409] pci 0000:08:00.0: reg 0x20: [io 0xd000-0xd0ff]
446[ 0.643420] pci 0000:08:00.0: reg 0x30: [mem 0xfcf40000-0xfcf5ffff pref]
447[ 0.643430] pci 0000:08:00.0: BAR 0: assigned to efifb
448[ 0.643475] pci 0000:08:00.0: supports D1 D2
449[ 0.643476] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
450[ 0.643509] pci 0000:08:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8 GT/s x16 link)
451[ 0.643544] pci 0000:08:00.1: [1002:aaa0] type 00 class 0x040300
452[ 0.643560] pci 0000:08:00.1: reg 0x10: [mem 0xfcf60000-0xfcf63fff 64bit]
453[ 0.643618] pci 0000:08:00.1: supports D1 D2
454[ 0.643684] pci 0000:00:03.1: PCI bridge to [bus 08]
455[ 0.643687] pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
456[ 0.643688] pci 0000:00:03.1: bridge window [mem 0xfcf00000-0xfcffffff]
457[ 0.643692] pci 0000:00:03.1: bridge window [mem 0x7e00000000-0x7effffffff 64bit pref]
458[ 0.643730] pci 0000:09:00.0: [1002:6758] type 00 class 0x030000
459[ 0.643754] pci 0000:09:00.0: reg 0x10: [mem 0x7f00000000-0x7f0fffffff 64bit pref]
460[ 0.643764] pci 0000:09:00.0: reg 0x18: [mem 0xfce20000-0xfce3ffff 64bit]
461[ 0.643769] pci 0000:09:00.0: reg 0x20: [io 0xc000-0xc0ff]
462[ 0.643780] pci 0000:09:00.0: reg 0x30: [mem 0xfce00000-0xfce1ffff pref]
463[ 0.643832] pci 0000:09:00.0: supports D1 D2
464[ 0.643858] pci 0000:09:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x8 link at 0000:00:03.2 (capable of 32.000 Gb/s with 2.5 GT/s x16 link)
465[ 0.643895] pci 0000:09:00.1: [1002:aa90] type 00 class 0x040300
466[ 0.643918] pci 0000:09:00.1: reg 0x10: [mem 0xfce40000-0xfce43fff 64bit]
467[ 0.643995] pci 0000:09:00.1: supports D1 D2
468[ 0.644069] pci 0000:00:03.2: PCI bridge to [bus 09]
469[ 0.644072] pci 0000:00:03.2: bridge window [io 0xc000-0xcfff]
470[ 0.644073] pci 0000:00:03.2: bridge window [mem 0xfce00000-0xfcefffff]
471[ 0.644076] pci 0000:00:03.2: bridge window [mem 0x7f00000000-0x7f0fffffff 64bit pref]
472[ 0.644109] pci 0000:0a:00.0: [1022:148a] type 00 class 0x130000
473[ 0.644142] pci 0000:0a:00.0: enabling Extended Tags
474[ 0.644241] pci 0000:00:07.1: PCI bridge to [bus 0a]
475[ 0.644288] pci 0000:0b:00.0: [1022:1485] type 00 class 0x130000
476[ 0.644328] pci 0000:0b:00.0: enabling Extended Tags
477[ 0.644418] pci 0000:0b:00.1: [1022:1486] type 00 class 0x108000
478[ 0.644439] pci 0000:0b:00.1: reg 0x18: [mem 0xfc900000-0xfc9fffff]
479[ 0.644450] pci 0000:0b:00.1: reg 0x24: [mem 0xfca08000-0xfca09fff]
480[ 0.644458] pci 0000:0b:00.1: enabling Extended Tags
481[ 0.644540] pci 0000:0b:00.3: [1022:149c] type 00 class 0x0c0330
482[ 0.644558] pci 0000:0b:00.3: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit]
483[ 0.644587] pci 0000:0b:00.3: enabling Extended Tags
484[ 0.644632] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
485[ 0.644687] pci 0000:0b:00.4: [1022:1487] type 00 class 0x040300
486[ 0.644701] pci 0000:0b:00.4: reg 0x10: [mem 0xfca00000-0xfca07fff]
487[ 0.644726] pci 0000:0b:00.4: enabling Extended Tags
488[ 0.644767] pci 0000:0b:00.4: PME# supported from D0 D3hot D3cold
489[ 0.644845] pci 0000:00:08.1: PCI bridge to [bus 0b]
490[ 0.644849] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcafffff]
491[ 0.645182] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
492[ 0.645225] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
493[ 0.645262] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
494[ 0.645308] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
495[ 0.645349] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
496[ 0.645385] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
497[ 0.645421] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
498[ 0.645456] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
499[ 0.646440] ACPI: EC: interrupt unblocked
500[ 0.646440] ACPI: EC: event unblocked
501[ 0.646446] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
502[ 0.646447] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events
503[ 0.646493] iommu: Default domain type: Passthrough (set via kernel command line)
504[ 0.646515] SCSI subsystem initialized
505[ 0.646528] libata version 3.00 loaded.
506[ 0.646528] pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
507[ 0.646528] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
508[ 0.646528] pci 0000:08:00.0: vgaarb: bridge control possible
509[ 0.646528] pci 0000:09:00.0: vgaarb: bridge control possible
510[ 0.646528] pci 0000:08:00.0: vgaarb: setting as boot device
511[ 0.646528] vgaarb: loaded
512[ 0.646528] ACPI: bus type USB registered
513[ 0.646528] usbcore: registered new interface driver usbfs
514[ 0.646528] usbcore: registered new interface driver hub
515[ 0.646528] usbcore: registered new device driver usb
516[ 0.646528] pps_core: LinuxPPS API ver. 1 registered
517[ 0.646528] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
518[ 0.646528] PTP clock support registered
519[ 0.646528] EDAC MC: Ver: 3.0.0
520[ 0.646528] Registered efivars operations
521[ 0.646528] PCI: Using ACPI for IRQ routing
522[ 0.648113] PCI: pci_cache_line_size set to 64 bytes
523[ 0.648183] e820: reserve RAM buffer [mem 0x09bff000-0x0bffffff]
524[ 0.648184] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
525[ 0.648184] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
526[ 0.648184] e820: reserve RAM buffer [mem 0x8a59c000-0x8bffffff]
527[ 0.648185] e820: reserve RAM buffer [mem 0x8a600000-0x8bffffff]
528[ 0.648185] e820: reserve RAM buffer [mem 0xc6cf9000-0xc7ffffff]
529[ 0.648186] e820: reserve RAM buffer [mem 0xc7340000-0xc7ffffff]
530[ 0.648186] e820: reserve RAM buffer [mem 0xca2c0000-0xcbffffff]
531[ 0.648187] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
532[ 0.648187] e820: reserve RAM buffer [mem 0x82f380000-0x82fffffff]
533[ 0.648244] NetLabel: Initializing
534[ 0.648244] NetLabel: domain hash size = 128
535[ 0.648244] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
536[ 0.648254] NetLabel: unlabeled traffic allowed by default
537[ 0.648261] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
538[ 0.648261] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
539[ 0.651419] clocksource: Switched to clocksource tsc-early
540[ 0.657253] *** VALIDATE bpf ***
541[ 0.657299] VFS: Disk quotas dquot_6.6.0
542[ 0.657311] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
543[ 0.657325] *** VALIDATE ramfs ***
544[ 0.657327] *** VALIDATE hugetlbfs ***
545[ 0.657383] AppArmor: AppArmor Filesystem Enabled
546[ 0.657395] pnp: PnP ACPI init
547[ 0.657473] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
548[ 0.657476] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
549[ 0.657537] system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
550[ 0.657538] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
551[ 0.657564] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
552[ 0.657685] system 00:03: [io 0x0300-0x030f] has been reserved
553[ 0.657686] system 00:03: [io 0x0230-0x023f] has been reserved
554[ 0.657686] system 00:03: [io 0x0290-0x029f] has been reserved
555[ 0.657688] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
556[ 0.657908] pnp 00:04: [dma 0 disabled]
557[ 0.657931] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
558[ 0.658095] system 00:05: [io 0x04d0-0x04d1] has been reserved
559[ 0.658096] system 00:05: [io 0x040b] has been reserved
560[ 0.658096] system 00:05: [io 0x04d6] has been reserved
561[ 0.658097] system 00:05: [io 0x0c00-0x0c01] has been reserved
562[ 0.658098] system 00:05: [io 0x0c14] has been reserved
563[ 0.658098] system 00:05: [io 0x0c50-0x0c51] has been reserved
564[ 0.658099] system 00:05: [io 0x0c52] has been reserved
565[ 0.658100] system 00:05: [io 0x0c6c] has been reserved
566[ 0.658100] system 00:05: [io 0x0c6f] has been reserved
567[ 0.658101] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
568[ 0.658101] system 00:05: [io 0x0800-0x089f] has been reserved
569[ 0.658102] system 00:05: [io 0x0b00-0x0b0f] has been reserved
570[ 0.658103] system 00:05: [io 0x0b20-0x0b3f] has been reserved
571[ 0.658103] system 00:05: [io 0x0900-0x090f] has been reserved
572[ 0.658104] system 00:05: [io 0x0910-0x091f] has been reserved
573[ 0.658105] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
574[ 0.658106] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
575[ 0.658107] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
576[ 0.658107] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
577[ 0.658108] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
578[ 0.658109] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
579[ 0.658109] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
580[ 0.658111] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
581[ 0.658574] pnp: PnP ACPI: found 6 devices
582[ 0.659441] thermal_sys: Registered thermal governor 'fair_share'
583[ 0.659441] thermal_sys: Registered thermal governor 'bang_bang'
584[ 0.659442] thermal_sys: Registered thermal governor 'step_wise'
585[ 0.659442] thermal_sys: Registered thermal governor 'user_space'
586[ 0.659442] thermal_sys: Registered thermal governor 'power_allocator'
587[ 0.663950] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
588[ 0.663980] pci 0000:02:00.0: PCI bridge to [bus 03]
589[ 0.663991] pci 0000:02:04.0: PCI bridge to [bus 04]
590[ 0.663995] pci 0000:02:04.0: bridge window [mem 0xfcc00000-0xfccfffff]
591[ 0.664003] pci 0000:02:06.0: PCI bridge to [bus 05]
592[ 0.664014] pci 0000:02:07.0: PCI bridge to [bus 06]
593[ 0.664016] pci 0000:02:07.0: bridge window [io 0xe000-0xefff]
594[ 0.664020] pci 0000:02:07.0: bridge window [mem 0xfcb00000-0xfcbfffff]
595[ 0.664027] pci 0000:02:09.0: PCI bridge to [bus 07]
596[ 0.664038] pci 0000:01:00.2: PCI bridge to [bus 02-07]
597[ 0.664040] pci 0000:01:00.2: bridge window [io 0xe000-0xefff]
598[ 0.664044] pci 0000:01:00.2: bridge window [mem 0xfcb00000-0xfccfffff]
599[ 0.664051] pci 0000:00:01.3: PCI bridge to [bus 01-07]
600[ 0.664052] pci 0000:00:01.3: bridge window [io 0xe000-0xefff]
601[ 0.664054] pci 0000:00:01.3: bridge window [mem 0xfcb00000-0xfcdfffff]
602[ 0.664059] pci 0000:00:03.1: PCI bridge to [bus 08]
603[ 0.664060] pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
604[ 0.664063] pci 0000:00:03.1: bridge window [mem 0xfcf00000-0xfcffffff]
605[ 0.664065] pci 0000:00:03.1: bridge window [mem 0x7e00000000-0x7effffffff 64bit pref]
606[ 0.664068] pci 0000:00:03.2: PCI bridge to [bus 09]
607[ 0.664069] pci 0000:00:03.2: bridge window [io 0xc000-0xcfff]
608[ 0.664071] pci 0000:00:03.2: bridge window [mem 0xfce00000-0xfcefffff]
609[ 0.664073] pci 0000:00:03.2: bridge window [mem 0x7f00000000-0x7f0fffffff 64bit pref]
610[ 0.664076] pci 0000:00:07.1: PCI bridge to [bus 0a]
611[ 0.664082] pci 0000:00:08.1: PCI bridge to [bus 0b]
612[ 0.664084] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcafffff]
613[ 0.664089] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
614[ 0.664090] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
615[ 0.664090] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
616[ 0.664091] pci_bus 0000:00: resource 7 [io 0x0d00-0xefff window]
617[ 0.664092] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
618[ 0.664092] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
619[ 0.664093] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xfcffffff window]
620[ 0.664094] pci_bus 0000:00: resource 11 [mem 0x830000000-0x7fffffffff window]
621[ 0.664095] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
622[ 0.664095] pci_bus 0000:01: resource 1 [mem 0xfcb00000-0xfcdfffff]
623[ 0.664096] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
624[ 0.664096] pci_bus 0000:02: resource 1 [mem 0xfcb00000-0xfccfffff]
625[ 0.664097] pci_bus 0000:04: resource 1 [mem 0xfcc00000-0xfccfffff]
626[ 0.664098] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
627[ 0.664099] pci_bus 0000:06: resource 1 [mem 0xfcb00000-0xfcbfffff]
628[ 0.664099] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
629[ 0.664100] pci_bus 0000:08: resource 1 [mem 0xfcf00000-0xfcffffff]
630[ 0.664101] pci_bus 0000:08: resource 2 [mem 0x7e00000000-0x7effffffff 64bit pref]
631[ 0.664101] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
632[ 0.664102] pci_bus 0000:09: resource 1 [mem 0xfce00000-0xfcefffff]
633[ 0.664102] pci_bus 0000:09: resource 2 [mem 0x7f00000000-0x7f0fffffff 64bit pref]
634[ 0.664103] pci_bus 0000:0b: resource 1 [mem 0xfc800000-0xfcafffff]
635[ 0.664179] NET: Registered protocol family 2
636[ 0.664334] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
637[ 0.664472] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
638[ 0.664719] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
639[ 0.664783] TCP: Hash tables configured (established 262144 bind 65536)
640[ 0.664835] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
641[ 0.664896] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
642[ 0.664969] NET: Registered protocol family 1
643[ 0.664972] NET: Registered protocol family 44
644[ 0.665192] pci 0000:08:00.1: D0 power state depends on 0000:08:00.0
645[ 0.665228] pci 0000:09:00.1: D0 power state depends on 0000:09:00.0
646[ 0.665347] PCI: CLS 64 bytes, default 64
647[ 0.665374] Trying to unpack rootfs image as initramfs...
648[ 1.054561] Freeing initrd memory: 41668K
649[ 1.054629] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
650[ 1.054779] pci 0000:00:01.0: Adding to iommu group 0
651[ 1.054801] pci 0000:00:01.3: Adding to iommu group 1
652[ 1.054817] pci 0000:00:02.0: Adding to iommu group 2
653[ 1.054841] pci 0000:00:03.0: Adding to iommu group 3
654[ 1.054861] pci 0000:00:03.1: Adding to iommu group 4
655[ 1.054882] pci 0000:00:03.2: Adding to iommu group 5
656[ 1.054896] pci 0000:00:04.0: Adding to iommu group 6
657[ 1.054910] pci 0000:00:05.0: Adding to iommu group 7
658[ 1.054929] pci 0000:00:07.0: Adding to iommu group 8
659[ 1.054947] pci 0000:00:07.1: Adding to iommu group 9
660[ 1.054966] pci 0000:00:08.0: Adding to iommu group 10
661[ 1.054986] pci 0000:00:08.1: Adding to iommu group 11
662[ 1.055002] pci 0000:00:14.0: Adding to iommu group 12
663[ 1.055013] pci 0000:00:14.3: Adding to iommu group 12
664[ 1.055044] pci 0000:00:18.0: Adding to iommu group 13
665[ 1.055055] pci 0000:00:18.1: Adding to iommu group 13
666[ 1.055066] pci 0000:00:18.2: Adding to iommu group 13
667[ 1.055078] pci 0000:00:18.3: Adding to iommu group 13
668[ 1.055089] pci 0000:00:18.4: Adding to iommu group 13
669[ 1.055100] pci 0000:00:18.5: Adding to iommu group 13
670[ 1.055111] pci 0000:00:18.6: Adding to iommu group 13
671[ 1.055123] pci 0000:00:18.7: Adding to iommu group 13
672[ 1.055165] pci 0000:01:00.0: Adding to iommu group 14
673[ 1.055194] pci 0000:01:00.1: Adding to iommu group 14
674[ 1.055222] pci 0000:01:00.2: Adding to iommu group 14
675[ 1.055236] pci 0000:02:00.0: Adding to iommu group 14
676[ 1.055249] pci 0000:02:04.0: Adding to iommu group 14
677[ 1.055262] pci 0000:02:06.0: Adding to iommu group 14
678[ 1.055276] pci 0000:02:07.0: Adding to iommu group 14
679[ 1.055289] pci 0000:02:09.0: Adding to iommu group 14
680[ 1.055310] pci 0000:04:00.0: Adding to iommu group 14
681[ 1.055333] pci 0000:06:00.0: Adding to iommu group 14
682[ 1.055380] pci 0000:08:00.0: Adding to iommu group 15
683[ 1.055410] pci 0000:08:00.1: Adding to iommu group 15
684[ 1.055441] pci 0000:09:00.0: Adding to iommu group 16
685[ 1.055467] pci 0000:09:00.1: Adding to iommu group 16
686[ 1.055487] pci 0000:0a:00.0: Adding to iommu group 17
687[ 1.055514] pci 0000:0b:00.0: Adding to iommu group 18
688[ 1.055537] pci 0000:0b:00.1: Adding to iommu group 19
689[ 1.055561] pci 0000:0b:00.3: Adding to iommu group 20
690[ 1.055585] pci 0000:0b:00.4: Adding to iommu group 21
691[ 1.055729] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
692[ 1.055730] pci 0000:00:00.2: AMD-Vi: Extended features (0x58f77ef22294ade):
693[ 1.055730] PPR X2APIC NX GT IA GA PC GA_vAPIC
694[ 1.055732] AMD-Vi: Interrupt remapping enabled
695[ 1.055732] AMD-Vi: Virtual APIC enabled
696[ 1.055732] AMD-Vi: X2APIC enabled
697[ 1.055808] AMD-Vi: Lazy IO/TLB flushing enabled
698[ 1.055809] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
699[ 1.055810] software IO TLB: mapped [mem 0xc2702000-0xc6702000] (64MB)
700[ 1.055846] amd_uncore: AMD NB counters detected
701[ 1.055849] amd_uncore: AMD LLC counters detected
702[ 1.055958] LVT offset 0 assigned for vector 0x400
703[ 1.056013] perf: AMD IBS detected (0x000003ff)
704[ 1.056017] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
705[ 1.056045] check: Scanning for low memory corruption every 60 seconds
706[ 1.056393] Initialise system trusted keyrings
707[ 1.056405] Key type blacklist registered
708[ 1.056427] workingset: timestamp_bits=36 max_order=23 bucket_order=0
709[ 1.057131] zbud: loaded
710[ 1.057339] squashfs: version 4.0 (2009/01/31) Phillip Lougher
711[ 1.057428] fuse: init (API version 7.31)
712[ 1.057437] *** VALIDATE fuse ***
713[ 1.057438] *** VALIDATE fuse ***
714[ 1.057498] Platform Keyring initialized
715[ 1.058433] Key type asymmetric registered
716[ 1.058434] Asymmetric key parser 'x509' registered
717[ 1.058438] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
718[ 1.058469] io scheduler mq-deadline registered
719[ 1.059015] pcieport 0000:00:01.3: PME: Signaling with IRQ 28
720[ 1.059061] pcieport 0000:00:01.3: AER: enabled with IRQ 28
721[ 1.059157] pcieport 0000:00:03.1: PME: Signaling with IRQ 29
722[ 1.059186] pcieport 0000:00:03.1: AER: enabled with IRQ 29
723[ 1.059272] pcieport 0000:00:03.2: PME: Signaling with IRQ 30
724[ 1.059300] pcieport 0000:00:03.2: AER: enabled with IRQ 30
725[ 1.059439] pcieport 0000:00:07.1: PME: Signaling with IRQ 31
726[ 1.059468] pcieport 0000:00:07.1: AER: enabled with IRQ 31
727[ 1.059543] pcieport 0000:00:08.1: PME: Signaling with IRQ 32
728[ 1.059572] pcieport 0000:00:08.1: AER: enabled with IRQ 32
729[ 1.060241] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
730[ 1.060339] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
731[ 1.060349] ACPI: Power Button [PWRB]
732[ 1.060367] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
733[ 1.060385] ACPI: Power Button [PWRF]
734[ 1.061070] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
735[ 1.081604] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
736[ 1.082456] Linux agpgart interface v0.103
737[ 1.084786] loop: module loaded
738[ 1.084951] libphy: Fixed MDIO Bus: probed
739[ 1.084951] tun: Universal TUN/TAP device driver, 1.6
740[ 1.085023] PPP generic driver version 2.4.2
741[ 1.085050] i8042: PNP: No PS/2 controller found.
742[ 1.085074] mousedev: PS/2 mouse device common for all mice
743[ 1.085131] rtc_cmos 00:02: RTC can wake from S4
744[ 1.085262] rtc_cmos 00:02: registered as rtc0
745[ 1.085269] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
746[ 1.085272] i2c /dev entries driver
747[ 1.085288] device-mapper: uevent: version 1.0.3
748[ 1.085314] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
749[ 1.085321] platform eisa.0: Probing EISA bus 0
750[ 1.085322] platform eisa.0: EISA: Cannot allocate resource for mainboard
751[ 1.085323] platform eisa.0: Cannot allocate resource for EISA slot 1
752[ 1.085324] platform eisa.0: Cannot allocate resource for EISA slot 2
753[ 1.085324] platform eisa.0: Cannot allocate resource for EISA slot 3
754[ 1.085325] platform eisa.0: Cannot allocate resource for EISA slot 4
755[ 1.085325] platform eisa.0: Cannot allocate resource for EISA slot 5
756[ 1.085326] platform eisa.0: Cannot allocate resource for EISA slot 6
757[ 1.085326] platform eisa.0: Cannot allocate resource for EISA slot 7
758[ 1.085327] platform eisa.0: Cannot allocate resource for EISA slot 8
759[ 1.085327] platform eisa.0: EISA: Detected 0 cards
760[ 1.085391] ledtrig-cpu: registered to indicate activity on CPUs
761[ 1.085394] EFI Variables Facility v0.08 2004-May-17
762[ 1.087835] drop_monitor: Initializing network drop monitor service
763[ 1.087928] NET: Registered protocol family 10
764[ 1.090833] Segment Routing with IPv6
765[ 1.090847] NET: Registered protocol family 17
766[ 1.090856] Bridge firewalling registered
767[ 1.090869] Key type dns_resolver registered
768[ 1.091330] RAS: Correctable Errors collector initialized.
769[ 1.091342] microcode: CPU0: patch_level=0x08701021
770[ 1.091345] microcode: CPU1: patch_level=0x08701021
771[ 1.091346] microcode: CPU2: patch_level=0x08701021
772[ 1.091350] microcode: CPU3: patch_level=0x08701021
773[ 1.091354] microcode: CPU4: patch_level=0x08701021
774[ 1.091358] microcode: CPU5: patch_level=0x08701021
775[ 1.091361] microcode: CPU6: patch_level=0x08701021
776[ 1.091363] microcode: CPU7: patch_level=0x08701021
777[ 1.091365] microcode: CPU8: patch_level=0x08701021
778[ 1.091368] microcode: CPU9: patch_level=0x08701021
779[ 1.091371] microcode: CPU10: patch_level=0x08701021
780[ 1.091374] microcode: CPU11: patch_level=0x08701021
781[ 1.091389] microcode: Microcode Update Driver: v2.2.
782[ 1.091463] *** VALIDATE rdt ***
783[ 1.091465] resctrl: L3 allocation detected
784[ 1.091465] resctrl: L3DATA allocation detected
785[ 1.091466] resctrl: L3CODE allocation detected
786[ 1.091466] resctrl: MB allocation detected
787[ 1.091466] resctrl: L3 monitoring detected
788[ 1.091468] IPI shorthand broadcast: enabled
789[ 1.091473] sched_clock: Marking stable (779165778, 312293505)->(1110712740, -19253457)
790[ 1.091513] registered taskstats version 1
791[ 1.091518] Loading compiled-in X.509 certificates
792[ 1.091544] zswap: loaded using pool lzo/zbud
793[ 1.091584] Key type ._fscrypt registered
794[ 1.091584] Key type .fscrypt registered
795[ 1.094327] Key type big_key registered
796[ 1.095531] Key type encrypted registered
797[ 1.095532] AppArmor: AppArmor sha1 policy hashing enabled
798[ 1.095605] ima: No TPM chip found, activating TPM-bypass!
799[ 1.095609] ima: Allocated hash algorithm: sha1
800[ 1.095614] ima: No architecture policies found
801[ 1.095618] evm: Initialising EVM extended attributes:
802[ 1.095618] evm: security.selinux
803[ 1.095619] evm: security.SMACK64
804[ 1.095619] evm: security.SMACK64EXEC
805[ 1.095619] evm: security.SMACK64TRANSMUTE
806[ 1.095619] evm: security.SMACK64MMAP
807[ 1.095620] evm: security.apparmor
808[ 1.095620] evm: security.ima
809[ 1.095620] evm: security.capability
810[ 1.095620] evm: HMAC attrs: 0x1
811[ 1.095872] PM: Magic number: 9:623:497
812[ 1.095959] rtc_cmos 00:02: setting system clock to 2021-02-08T20:28:05 UTC (1612816085)
813[ 1.096087] acpi_cpufreq: overriding BIOS provided _PSD data
814[ 1.097079] Freeing unused decrypted memory: 2040K
815[ 1.097342] Freeing unused kernel image memory: 2704K
816[ 1.114001] Write protecting the kernel read-only data: 22528k
817[ 1.114276] Freeing unused kernel image memory: 2008K
818[ 1.114404] Freeing unused kernel image memory: 1188K
819[ 1.122181] x86/mm: Checked W+X mappings: passed, no W+X pages found.
820[ 1.122182] Run /init as init process
821[ 1.190516] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
822[ 1.190620] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
823[ 1.193607] dca service started, version 1.12.1
824[ 1.193640] ahci 0000:01:00.1: version 3.0
825[ 1.193769] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
826[ 1.193820] xhci_hcd 0000:01:00.0: xHCI Host Controller
827[ 1.193824] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
828[ 1.193838] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
829[ 1.193840] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
830[ 1.194319] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
831[ 1.194319] igb: Copyright (c) 2007-2014 Intel Corporation.
832[ 1.194486] scsi host0: ahci
833[ 1.194649] scsi host1: ahci
834[ 1.195441] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
835[ 1.195443] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
836[ 1.195448] scsi host2: ahci
837[ 1.195529] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
838[ 1.197298] scsi host3: ahci
839[ 1.201088] scsi host4: ahci
840[ 1.205537] scsi host5: ahci
841[ 1.205633] scsi host6: ahci
842[ 1.205777] scsi host7: ahci
843[ 1.205812] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 40
844[ 1.205814] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 40
845[ 1.205816] ata3: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80200 irq 40
846[ 1.205817] ata4: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80280 irq 40
847[ 1.205819] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 40
848[ 1.205821] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 40
849[ 1.205822] ata7: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80400 irq 40
850[ 1.205824] ata8: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80480 irq 40
851[ 1.225449] pps pps0: new PPS source ptp0
852[ 1.225468] igb 0000:06:00.0: added PHC on eth0
853[ 1.225469] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
854[ 1.225470] igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 04:d4:c4:57:08:8a
855[ 1.225471] igb 0000:06:00.0: eth0: PBA No: FFFFFF-0FF
856[ 1.225472] igb 0000:06:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
857[ 1.226025] igb 0000:06:00.0 enp6s0: renamed from eth0
858[ 1.249133] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
859[ 1.249282] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
860[ 1.249283] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
861[ 1.249284] usb usb1: Product: xHCI Host Controller
862[ 1.249285] usb usb1: Manufacturer: Linux 5.4.73-1-pve xhci-hcd
863[ 1.249285] usb usb1: SerialNumber: 0000:01:00.0
864[ 1.249347] hub 1-0:1.0: USB hub found
865[ 1.249364] hub 1-0:1.0: 14 ports detected
866[ 1.255053] xhci_hcd 0000:01:00.0: xHCI Host Controller
867[ 1.255055] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
868[ 1.255057] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
869[ 1.255094] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
870[ 1.255103] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
871[ 1.255104] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
872[ 1.255104] usb usb2: Product: xHCI Host Controller
873[ 1.255105] usb usb2: Manufacturer: Linux 5.4.73-1-pve xhci-hcd
874[ 1.255105] usb usb2: SerialNumber: 0000:01:00.0
875[ 1.255153] hub 2-0:1.0: USB hub found
876[ 1.255163] hub 2-0:1.0: 8 ports detected
877[ 1.255965] usb: port power management may be unreliable
878[ 1.258481] xhci_hcd 0000:04:00.0: xHCI Host Controller
879[ 1.258484] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
880[ 1.317268] xhci_hcd 0000:04:00.0: hcc params 0x0200eec0 hci version 0x110 quirks 0x0000000000800010
881[ 1.317571] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
882[ 1.317572] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
883[ 1.317572] usb usb3: Product: xHCI Host Controller
884[ 1.317573] usb usb3: Manufacturer: Linux 5.4.73-1-pve xhci-hcd
885[ 1.317573] usb usb3: SerialNumber: 0000:04:00.0
886[ 1.317617] hub 3-0:1.0: USB hub found
887[ 1.317623] hub 3-0:1.0: 2 ports detected
888[ 1.317707] xhci_hcd 0000:04:00.0: xHCI Host Controller
889[ 1.317708] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
890[ 1.317709] xhci_hcd 0000:04:00.0: Host supports USB 3.1 Enhanced SuperSpeed
891[ 1.317733] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
892[ 1.317741] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
893[ 1.317742] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
894[ 1.317743] usb usb4: Product: xHCI Host Controller
895[ 1.317743] usb usb4: Manufacturer: Linux 5.4.73-1-pve xhci-hcd
896[ 1.317744] usb usb4: SerialNumber: 0000:04:00.0
897[ 1.317780] hub 4-0:1.0: USB hub found
898[ 1.317786] hub 4-0:1.0: 2 ports detected
899[ 1.317877] xhci_hcd 0000:0b:00.3: xHCI Host Controller
900[ 1.317879] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 5
901[ 1.317977] xhci_hcd 0000:0b:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
902[ 1.318223] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
903[ 1.318224] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
904[ 1.318224] usb usb5: Product: xHCI Host Controller
905[ 1.318224] usb usb5: Manufacturer: Linux 5.4.73-1-pve xhci-hcd
906[ 1.318225] usb usb5: SerialNumber: 0000:0b:00.3
907[ 1.318273] hub 5-0:1.0: USB hub found
908[ 1.318277] hub 5-0:1.0: 4 ports detected
909[ 1.318389] xhci_hcd 0000:0b:00.3: xHCI Host Controller
910[ 1.318391] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 6
911[ 1.318392] xhci_hcd 0000:0b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
912[ 1.318399] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
913[ 1.318408] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
914[ 1.318408] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
915[ 1.318409] usb usb6: Product: xHCI Host Controller
916[ 1.318409] usb usb6: Manufacturer: Linux 5.4.73-1-pve xhci-hcd
917[ 1.318410] usb usb6: SerialNumber: 0000:0b:00.3
918[ 1.318450] hub 6-0:1.0: USB hub found
919[ 1.318455] hub 6-0:1.0: 4 ports detected
920[ 1.686403] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
921[ 1.693372] ata1.00: ATA-8: KINGSTON SV300S37A120G, 600ABBF0, max UDMA/133
922[ 1.693373] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
923[ 1.699415] ata1.00: configured for UDMA/133
924[ 1.699506] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
925[ 1.699598] sd 0:0:0:0: Attached scsi generic sg0 type 0
926[ 1.699625] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
927[ 1.699633] sd 0:0:0:0: [sda] Write Protect is off
928[ 1.699634] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
929[ 1.699652] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
930[ 1.702395] usb 3-1: new low-speed USB device number 2 using xhci_hcd
931[ 1.702399] usb 5-4: new full-speed USB device number 2 using xhci_hcd
932[ 1.715394] sda: sda1 sda9
933[ 1.715651] sd 0:0:0:0: [sda] Attached SCSI disk
934[ 1.873408] usb 5-4: New USB device found, idVendor=046d, idProduct=c245, bcdDevice=69.00
935[ 1.873409] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
936[ 1.873410] usb 5-4: Product: Gaming Mouse G400
937[ 1.873410] usb 5-4: Manufacturer: Logitech
938[ 1.884030] hidraw: raw HID events driver (C) Jiri Kosina
939[ 1.893441] usbcore: registered new interface driver usbhid
940[ 1.893442] usbhid: USB HID core driver
941[ 1.893558] usbcore: registered new interface driver usbmouse
942[ 1.894060] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.0/0003:046D:C245.0001/input/input2
943[ 1.894107] hid-generic 0003:046D:C245.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input0
944[ 1.894167] hid-generic 0003:046D:C245.0002: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input1
945[ 2.027963] usb 3-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
946[ 2.027965] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
947[ 2.027965] usb 3-1: Product: USB Keyboard
948[ 2.027966] usb 3-1: Manufacturer: Logitech
949[ 2.055823] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.0/0003:046D:C31C.0003/input/input3
950[ 2.082397] tsc: Refined TSC clocksource calibration: 3593.249 MHz
951[ 2.082403] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb698e952, max_idle_ns: 440795267109 ns
952[ 2.082420] clocksource: Switched to clocksource tsc
953[ 2.114431] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:04:00.0-1/input0
954[ 2.143814] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0004/input/input4
955[ 2.174403] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
956[ 2.174494] ata2.00: ATA-11: KINGSTON SA400S37120G, SBFK71E0, max UDMA/133
957[ 2.174494] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
958[ 2.174587] ata2.00: configured for UDMA/133
959[ 2.174646] scsi 1:0:0:0: Direct-Access ATA KINGSTON SA400S3 71E0 PQ: 0 ANSI: 5
960[ 2.174723] sd 1:0:0:0: Attached scsi generic sg1 type 0
961[ 2.174757] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
962[ 2.174764] sd 1:0:0:0: [sdb] Write Protect is off
963[ 2.174765] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
964[ 2.174774] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
965[ 2.192636] sdb: sdb1 sdb2 sdb3
966[ 2.192899] sd 1:0:0:0: [sdb] Attached SCSI disk
967[ 2.202427] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0004/input/input5
968[ 2.202459] hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:04:00.0-1/input1
969[ 2.202834] usbcore: registered new interface driver usbkbd
970[ 2.488514] ata3: SATA link down (SStatus 0 SControl 330)
971[ 2.800512] ata4: SATA link down (SStatus 0 SControl 330)
972[ 3.112511] ata5: SATA link down (SStatus 0 SControl 330)
973[ 3.586401] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
974[ 3.587941] ata6.00: supports DRM functions and may not be fully accessible
975[ 3.588609] ata6.00: disabling queued TRIM support
976[ 3.588610] ata6.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
977[ 3.588611] ata6.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
978[ 3.590296] ata6.00: supports DRM functions and may not be fully accessible
979[ 3.590834] ata6.00: disabling queued TRIM support
980[ 3.592266] ata6.00: configured for UDMA/133
981[ 3.592360] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
982[ 3.592452] sd 5:0:0:0: Attached scsi generic sg2 type 0
983[ 3.592496] sd 5:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
984[ 3.592504] sd 5:0:0:0: [sdc] Write Protect is off
985[ 3.592505] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
986[ 3.592516] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
987[ 3.607601] sdc: sdc1 sdc9
988[ 3.608119] sd 5:0:0:0: [sdc] supports TCG Opal
989[ 3.608119] sd 5:0:0:0: [sdc] Attached SCSI disk
990[ 4.630394] ata7: failed to resume link (SControl 0)
991[ 4.630406] ata7: SATA link down (SStatus 0 SControl 0)
992[ 5.670393] ata8: failed to resume link (SControl 0)
993[ 5.670405] ata8: SATA link down (SStatus 0 SControl 0)
994[ 6.050392] raid6: avx2x4 gen() 38250 MB/s
995[ 6.098392] raid6: avx2x4 xor() 18531 MB/s
996[ 6.146391] raid6: avx2x2 gen() 36211 MB/s
997[ 6.194391] raid6: avx2x2 xor() 22835 MB/s
998[ 6.242392] raid6: avx2x1 gen() 20245 MB/s
999[ 6.290392] raid6: avx2x1 xor() 16886 MB/s
1000[ 6.338391] raid6: sse2x4 gen() 18145 MB/s
1001[ 6.386393] raid6: sse2x4 xor() 10540 MB/s
1002[ 6.434392] raid6: sse2x2 gen() 17886 MB/s
1003[ 6.482392] raid6: sse2x2 xor() 11684 MB/s
1004[ 6.530392] raid6: sse2x1 gen() 8449 MB/s
1005[ 6.578392] raid6: sse2x1 xor() 8542 MB/s
1006[ 6.578393] raid6: using algorithm avx2x4 gen() 38250 MB/s
1007[ 6.578393] raid6: .... xor() 18531 MB/s, rmw enabled
1008[ 6.578393] raid6: using avx2x2 recovery algorithm
1009[ 6.578704] xor: automatically using best checksumming function avx
1010[ 6.583428] Btrfs loaded, crc32c=crc32c-intel
1011[ 6.644684] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
1012[ 6.783626] systemd[1]: Inserted module 'autofs4'
1013[ 6.801084] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
1014[ 6.818422] systemd[1]: Detected architecture x86-64.
1015[ 6.834935] systemd[1]: Set hostname to <kutasinet>.
1016[ 6.983466] systemd[1]: Listening on fsck to fsckd communication Socket.
1017[ 6.983488] systemd[1]: Reached target ceph target allowing to start/stop all ceph-fuse@.service instances at once.
1018[ 6.983508] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
1019[ 6.983541] systemd[1]: Listening on Syslog Socket.
1020[ 6.985250] systemd[1]: Listening on RPCbind Server Activation Socket.
1021[ 6.985316] systemd[1]: Listening on Journal Socket.
1022[ 6.985692] systemd[1]: Mounting Kernel Debug File System...
1023[ 7.003304] VFIO - User Level meta-driver version: 0.3
1024[ 7.004044] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
1025[ 7.005683] RPC: Registered named UNIX socket transport module.
1026[ 7.005683] RPC: Registered udp transport module.
1027[ 7.005684] RPC: Registered tcp transport module.
1028[ 7.005684] RPC: Registered tcp NFSv4.1 backchannel transport module.
1029[ 7.016141] vfio-pci 0000:08:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
1030[ 7.034408] vfio_pci: add [1002:679a[ffffffff:ffffffff]] class 0x000000/00000000
1031[ 7.051831] systemd-journald[439]: Received request to flush runtime journal from PID 1
1032[ 7.058416] vfio_pci: add [1002:aaa0[ffffffff:ffffffff]] class 0x000000/00000000
1033[ 7.058462] vfio-pci 0000:09:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
1034[ 7.078455] vfio_pci: add [1002:6758[ffffffff:ffffffff]] class 0x000000/00000000
1035[ 7.098575] vfio_pci: add [1002:aa90[ffffffff:ffffffff]] class 0x000000/00000000
1036[ 7.105812] Loading iSCSI transport class v2.0-870.
1037[ 7.111682] iscsi: registered transport (tcp)
1038[ 7.113207] ccp 0000:0b:00.1: enabling device (0000 -> 0002)
1039[ 7.114368] ccp 0000:0b:00.1: ccp enabled
1040[ 7.121260] input: PC Speaker as /devices/platform/pcspkr/input/input6
1041[ 7.132402] cryptd: max_cpu_qlen set to 1000
1042[ 7.132834] asus_wmi: ASUS WMI generic driver loaded
1043[ 7.135330] asus_wmi: Initialization: 0x0
1044[ 7.135364] asus_wmi: BIOS WMI version: 0.9
1045[ 7.135533] asus_wmi: SFUN value: 0x0
1046[ 7.135534] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
1047[ 7.135997] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
1048[ 7.164291] spl: loading out-of-tree module taints kernel.
1049[ 7.187314] AVX2 version of gcm_enc/dec engaged.
1050[ 7.187315] AES CTR mode by8 optimization enabled
1051[ 7.191382] znvpair: module license 'CDDL' taints kernel.
1052[ 7.191383] Disabling lock debugging due to kernel taint
1053[ 7.199575] iscsi: registered transport (iser)
1054[ 7.199666] snd_hda_intel 0000:0b:00.4: enabling device (0000 -> 0002)
1055[ 7.203736] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
1056[ 7.246248] [drm:amdgpu_init [amdgpu]] *ERROR* VGACON disables amdgpu kernel modesetting.
1057[ 7.246940] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
1058[ 7.246942] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
1059[ 7.246943] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
1060[ 7.246943] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
1061[ 7.246944] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
1062[ 7.246945] snd_hda_codec_realtek hdaudioC0D0: inputs:
1063[ 7.246945] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
1064[ 7.246946] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
1065[ 7.246947] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
1066[ 7.259881] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card0/input8
1067[ 7.259914] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card0/input9
1068[ 7.259945] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card0/input10
1069[ 7.259984] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card0/input11
1070[ 7.260013] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card0/input12
1071[ 7.260041] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card0/input13
1072[ 7.260073] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card0/input14
1073[ 7.260119] snd_hda_intel 0000:0b:00.4: device 1043:8733 is on the power_save blacklist, forcing power_save to 0
1074[ 7.800203] kvm: Nested Virtualization enabled
1075[ 7.800217] kvm: Nested Paging enabled
1076[ 7.800218] SVM: Virtual VMLOAD VMSAVE supported
1077[ 7.800218] SVM: Virtual GIF supported
1078[ 7.803317] MCE: In-kernel MCE decoding enabled.
1079[ 7.805001] EDAC amd64: Node 0: DRAM ECC disabled.
1080[ 7.805002] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
1081 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
1082 (Note that use of the override may cause unknown side effects.)
1083[ 7.854422] Adding 8388604k swap on /dev/mapper/pve-swap. Priority:-2 extents:1 across:8388604k SSFS
1084[ 7.926765] EDAC amd64: Node 0: DRAM ECC disabled.
1085[ 7.926766] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
1086 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
1087 (Note that use of the override may cause unknown side effects.)
1088[ 8.330647] EDAC amd64: Node 0: DRAM ECC disabled.
1089[ 8.330648] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
1090 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
1091 (Note that use of the override may cause unknown side effects.)
1092[ 9.253139] ZFS: Loaded module v0.8.5-pve1, ZFS pool version 5000, ZFS filesystem version 5
1093[ 9.258685] EDAC amd64: Node 0: DRAM ECC disabled.
1094[ 9.258686] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
1095 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
1096 (Note that use of the override may cause unknown side effects.)
1097[ 9.342675] EDAC amd64: Node 0: DRAM ECC disabled.
1098[ 9.342676] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
1099 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
1100 (Note that use of the override may cause unknown side effects.)
1101[ 9.390639] EDAC amd64: Node 0: DRAM ECC disabled.
1102[ 9.390640] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
1103 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
1104 (Note that use of the override may cause unknown side effects.)
1105[ 9.422572] EDAC amd64: Node 0: DRAM ECC disabled.
1106[ 9.422573] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
1107 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
1108 (Note that use of the override may cause unknown side effects.)
1109[ 9.470578] EDAC amd64: Node 0: DRAM ECC disabled.
1110[ 9.470579] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
1111 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
1112 (Note that use of the override may cause unknown side effects.)
1113[ 9.518569] EDAC amd64: Node 0: DRAM ECC disabled.
1114[ 9.518570] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
1115 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
1116 (Note that use of the override may cause unknown side effects.)
1117[ 9.554581] EDAC amd64: Node 0: DRAM ECC disabled.
1118[ 9.554582] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
1119 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
1120 (Note that use of the override may cause unknown side effects.)
1121[ 9.598566] EDAC amd64: Node 0: DRAM ECC disabled.
1122[ 9.598567] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
1123 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
1124 (Note that use of the override may cause unknown side effects.)
1125[ 9.646564] EDAC amd64: Node 0: DRAM ECC disabled.
1126[ 9.646565] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
1127 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
1128 (Note that use of the override may cause unknown side effects.)
1129[ 9.962959] zd16: p1 p2 p3 p4
1130[ 9.965638] zd32: p1 p2 p3 p4
1131[ 10.071612] audit: type=1400 audit(1612816094.470:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1641 comm="apparmor_parser"
1132[ 10.072327] audit: type=1400 audit(1612816094.470:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1644 comm="apparmor_parser"
1133[ 10.072328] audit: type=1400 audit(1612816094.470:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1644 comm="apparmor_parser"
1134[ 10.073180] audit: type=1400 audit(1612816094.470:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1643 comm="apparmor_parser"
1135[ 10.073183] audit: type=1400 audit(1612816094.470:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1643 comm="apparmor_parser"
1136[ 10.073184] audit: type=1400 audit(1612816094.470:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1643 comm="apparmor_parser"
1137[ 10.074828] audit: type=1400 audit(1612816094.474:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=1642 comm="apparmor_parser"
1138[ 10.074831] audit: type=1400 audit(1612816094.474:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=1642 comm="apparmor_parser"
1139[ 10.074833] audit: type=1400 audit(1612816094.474:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=1642 comm="apparmor_parser"
1140[ 10.074834] audit: type=1400 audit(1612816094.474:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=1642 comm="apparmor_parser"
1141[ 10.092397] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
1142[ 10.114315] new mount options do not match the existing superblock, will be ignored
1143[ 10.130132] vmbr0: port 1(enp6s0) entered blocking state
1144[ 10.130133] vmbr0: port 1(enp6s0) entered disabled state
1145[ 10.130182] device enp6s0 entered promiscuous mode
1146[ 10.301577] bpfilter: Loaded bpfilter_umh pid 1792
1147[ 10.301717] Started bpfilter
1148[ 13.106974] igb 0000:06:00.0 enp6s0: igb: enp6s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
1149[ 13.214666] vmbr0: port 1(enp6s0) entered blocking state
1150[ 13.214667] vmbr0: port 1(enp6s0) entered forwarding state
1151[ 13.214868] IPv6: ADDRCONF(NETDEV_CHANGE): vmbr0: link becomes ready
1152[ 24.242317] FS-Cache: Loaded
1153[ 24.250932] FS-Cache: Netfs 'cifs' registered for caching
1154[ 24.253440] Key type cifs.spnego registered
1155[ 24.253447] Key type cifs.idmap registered
1156[ 24.253589] CIFS: Attempting to mount //192.168.1.100/PROXMOX
1157[ 126.911422] device tap101i0 entered promiscuous mode
1158[ 126.915842] vmbr0: port 2(tap101i0) entered blocking state
1159[ 126.915843] vmbr0: port 2(tap101i0) entered disabled state
1160[ 126.915907] vmbr0: port 2(tap101i0) entered blocking state
1161[ 126.915908] vmbr0: port 2(tap101i0) entered forwarding state
1162[ 128.594981] vfio-pci 0000:08:00.0: vfio_ecap_init: hiding ecap 0x19@0x270
1163[ 128.594988] vfio-pci 0000:08:00.0: vfio_ecap_init: hiding ecap 0x1b@0x2d0
1164[ 128.596274] vfio-pci 0000:08:00.1: enabling device (0000 -> 0002)
1165[ 131.335494] vfio-pci 0000:08:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1166[ 131.335501] vfio-pci 0000:08:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1167[ 131.335505] vfio-pci 0000:08:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1168[ 131.335509] vfio-pci 0000:08:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1169[ 131.335513] vfio-pci 0000:08:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1170[ 131.335517] vfio-pci 0000:08:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1171[ 131.335521] vfio-pci 0000:08:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1172[ 131.335525] vfio-pci 0000:08:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1173[ 131.335530] vfio-pci 0000:08:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1174[ 131.335534] vfio-pci 0000:08:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1175[ 131.335538] amd_iommu_report_page_fault: 6 callbacks suppressed
1176[ 131.335539] AMD-Vi: Event logged [IO_PAGE_FAULT device=08:00.0 domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1177[ 131.335544] AMD-Vi: Event logged [IO_PAGE_FAULT device=08:00.0 domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1178[ 131.335548] AMD-Vi: Event logged [IO_PAGE_FAULT device=08:00.0 domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1179[ 131.335552] AMD-Vi: Event logged [IO_PAGE_FAULT device=08:00.0 domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1180[ 131.335556] AMD-Vi: Event logged [IO_PAGE_FAULT device=08:00.0 domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1181[ 131.335560] AMD-Vi: Event logged [IO_PAGE_FAULT device=08:00.0 domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1182[ 131.335564] AMD-Vi: Event logged [IO_PAGE_FAULT device=08:00.0 domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1183[ 131.335568] AMD-Vi: Event logged [IO_PAGE_FAULT device=08:00.0 domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1184[ 131.335572] AMD-Vi: Event logged [IO_PAGE_FAULT device=08:00.0 domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1185[ 131.335576] AMD-Vi: Event logged [IO_PAGE_FAULT device=08:00.0 domain=0x0017 address=0xf4ffff9700 flags=0x0010]
1186[ 138.371583] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1187[ 138.937454] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1188[ 483.098129] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1189[ 483.799550] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1190[ 490.053914] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1191[ 490.619549] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1192[ 526.029058] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1193[ 526.734559] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1194[ 532.981189] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1195[ 533.546566] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1196[ 537.957429] vmbr0: port 2(tap101i0) entered disabled state
1197[ 538.146560] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1198[ 538.305663] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.0/0003:046D:C245.0005/input/input15
1199[ 538.305723] hid-generic 0003:046D:C245.0005: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input0
1200[ 538.310654] hid-generic 0003:046D:C245.0006: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input1
1201[ 538.577274] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1202[ 538.948306] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.0/0003:046D:C31C.0007/input/input16
1203[ 539.005177] hid-generic 0003:046D:C31C.0007: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:04:00.0-1/input0
1204[ 539.028317] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0008/input/input17
1205[ 539.085131] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0008/input/input18
1206[ 539.085160] hid-generic 0003:046D:C31C.0008: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:04:00.0-1/input1
1207[ 567.260771] device tap101i0 entered promiscuous mode
1208[ 567.265570] vmbr0: port 2(tap101i0) entered blocking state
1209[ 567.265571] vmbr0: port 2(tap101i0) entered disabled state
1210[ 567.265640] vmbr0: port 2(tap101i0) entered blocking state
1211[ 567.265641] vmbr0: port 2(tap101i0) entered forwarding state
1212[ 568.933926] vfio-pci 0000:08:00.0: vfio_ecap_init: hiding ecap 0x19@0x270
1213[ 568.933934] vfio-pci 0000:08:00.0: vfio_ecap_init: hiding ecap 0x1b@0x2d0
1214[ 579.831579] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1215[ 580.333666] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1216[ 593.627935] vmbr0: port 2(tap101i0) entered disabled state
1217[ 593.839580] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1218[ 594.002684] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.0/0003:046D:C245.0009/input/input19
1219[ 594.002744] hid-generic 0003:046D:C245.0009: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input0
1220[ 594.007673] hid-generic 0003:046D:C245.000A: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input1
1221[ 594.273698] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1222[ 594.644891] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.0/0003:046D:C31C.000B/input/input20
1223[ 594.701607] hid-generic 0003:046D:C31C.000B: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:04:00.0-1/input0
1224[ 594.724918] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.000C/input/input21
1225[ 594.781546] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.000C/input/input22
1226[ 594.781577] hid-generic 0003:046D:C31C.000C: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:04:00.0-1/input1
1227[ 599.029025] device tap101i0 entered promiscuous mode
1228[ 599.034054] vmbr0: port 2(tap101i0) entered blocking state
1229[ 599.034055] vmbr0: port 2(tap101i0) entered disabled state
1230[ 599.034118] vmbr0: port 2(tap101i0) entered blocking state
1231[ 599.034118] vmbr0: port 2(tap101i0) entered forwarding state
1232[ 600.700840] vfio-pci 0000:08:00.0: vfio_ecap_init: hiding ecap 0x19@0x270
1233[ 600.700848] vfio-pci 0000:08:00.0: vfio_ecap_init: hiding ecap 0x1b@0x2d0
1234[ 609.553692] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1235[ 610.123585] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1236[ 642.965520] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1237[ 643.667588] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1238[ 654.845419] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1239[ 655.410598] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1240[ 963.286979] vmbr0: port 2(tap101i0) entered disabled state
1241[ 963.456680] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1242[ 963.615786] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.0/0003:046D:C245.000D/input/input23
1243[ 963.615846] hid-generic 0003:046D:C245.000D: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input0
1244[ 963.620756] hid-generic 0003:046D:C245.000E: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input1
1245[ 963.887266] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1246[ 964.254736] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.0/0003:046D:C31C.000F/input/input24
1247[ 964.311163] hid-generic 0003:046D:C31C.000F: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:04:00.0-1/input0
1248[ 964.333700] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0010/input/input25
1249[ 964.391098] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0010/input/input26
1250[ 964.391130] hid-generic 0003:046D:C31C.0010: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:04:00.0-1/input1
1251[ 985.629866] device tap101i0 entered promiscuous mode
1252[ 985.635131] vmbr0: port 2(tap101i0) entered blocking state
1253[ 985.635132] vmbr0: port 2(tap101i0) entered disabled state
1254[ 985.635212] vmbr0: port 2(tap101i0) entered blocking state
1255[ 985.635213] vmbr0: port 2(tap101i0) entered forwarding state
1256[ 987.296385] vfio-pci 0000:08:00.0: vfio_ecap_init: hiding ecap 0x19@0x270
1257[ 987.296392] vfio-pci 0000:08:00.0: vfio_ecap_init: hiding ecap 0x1b@0x2d0
1258[ 996.410466] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1259[ 996.975690] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1260[ 1029.965636] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1261[ 1030.678698] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1262[ 1038.036515] vmbr0: port 2(tap101i0) entered disabled state
1263[ 1038.227702] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1264[ 1038.393798] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.0/0003:046D:C245.0011/input/input27
1265[ 1038.393867] hid-generic 0003:046D:C245.0011: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input0
1266[ 1038.398789] hid-generic 0003:046D:C245.0012: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input1
1267[ 1038.665614] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1268[ 1039.036543] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.0/0003:046D:C31C.0013/input/input28
1269[ 1039.093522] hid-generic 0003:046D:C31C.0013: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:04:00.0-1/input0
1270[ 1039.116534] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0014/input/input29
1271[ 1039.173462] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0014/input/input30
1272[ 1039.173496] hid-generic 0003:046D:C31C.0014: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:04:00.0-1/input1
1273[ 1711.058910] device tap101i0 entered promiscuous mode
1274[ 1711.063764] vmbr0: port 2(tap101i0) entered blocking state
1275[ 1711.063765] vmbr0: port 2(tap101i0) entered disabled state
1276[ 1711.063831] vmbr0: port 2(tap101i0) entered blocking state
1277[ 1711.063832] vmbr0: port 2(tap101i0) entered forwarding state
1278[ 1712.735733] vfio-pci 0000:08:00.0: vfio_ecap_init: hiding ecap 0x19@0x270
1279[ 1712.735740] vfio-pci 0000:08:00.0: vfio_ecap_init: hiding ecap 0x1b@0x2d0
1280[ 1769.281930] vmbr0: port 2(tap101i0) entered disabled state
1281[ 1769.479903] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1282[ 1769.639010] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.0/0003:046D:C245.0015/input/input31
1283[ 1769.639068] hid-generic 0003:046D:C245.0015: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input0
1284[ 1769.643971] hid-generic 0003:046D:C245.0016: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input1
1285[ 1769.910716] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1286[ 1770.282116] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.0/0003:046D:C31C.0017/input/input32
1287[ 1770.338610] hid-generic 0003:046D:C31C.0017: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:04:00.0-1/input0
1288[ 1770.361138] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0018/input/input33
1289[ 1770.418552] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0018/input/input34
1290[ 1770.418583] hid-generic 0003:046D:C31C.0018: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:04:00.0-1/input1
1291[ 1776.194061] device tap101i0 entered promiscuous mode
1292[ 1776.199225] vmbr0: port 2(tap101i0) entered blocking state
1293[ 1776.199226] vmbr0: port 2(tap101i0) entered disabled state
1294[ 1776.199289] vmbr0: port 2(tap101i0) entered blocking state
1295[ 1776.199290] vmbr0: port 2(tap101i0) entered forwarding state
1296[ 1777.861642] vfio-pci 0000:08:00.0: vfio_ecap_init: hiding ecap 0x19@0x270
1297[ 1777.861650] vfio-pci 0000:08:00.0: vfio_ecap_init: hiding ecap 0x1b@0x2d0
1298[ 1857.490301] vmbr0: port 2(tap101i0) entered disabled state
1299[ 1857.690930] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1300[ 1857.853035] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.0/0003:046D:C245.0019/input/input35
1301[ 1857.853095] hid-generic 0003:046D:C245.0019: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input0
1302[ 1857.858006] hid-generic 0003:046D:C245.001A: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input1
1303[ 1858.124975] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1304[ 1858.495804] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.0/0003:046D:C31C.001B/input/input36
1305[ 1858.552868] hid-generic 0003:046D:C31C.001B: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:04:00.0-1/input0
1306[ 1858.575784] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.001C/input/input37
1307[ 1858.632807] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.001C/input/input38
1308[ 1858.632837] hid-generic 0003:046D:C31C.001C: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:04:00.0-1/input1
1309[ 1862.084510] device tap101i0 entered promiscuous mode
1310[ 1862.090275] vmbr0: port 2(tap101i0) entered blocking state
1311[ 1862.090277] vmbr0: port 2(tap101i0) entered disabled state
1312[ 1862.090356] vmbr0: port 2(tap101i0) entered blocking state
1313[ 1862.090357] vmbr0: port 2(tap101i0) entered forwarding state
1314[ 1863.760499] vfio-pci 0000:08:00.0: vfio_ecap_init: hiding ecap 0x19@0x270
1315[ 1863.760506] vfio-pci 0000:08:00.0: vfio_ecap_init: hiding ecap 0x1b@0x2d0
1316[ 1872.544690] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1317[ 1873.109937] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1318[ 1905.176029] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1319[ 1905.885938] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1320[ 1914.984945] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1321[ 1915.479813] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1322[ 1949.243131] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1323[ 1949.944951] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1324[ 1957.722961] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1325[ 1958.284963] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1326[ 3024.546016] vmbr0: port 2(tap101i0) entered disabled state
1327[ 3024.729253] usb 5-4: reset full-speed USB device number 2 using xhci_hcd
1328[ 3024.888378] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.0/0003:046D:C245.001D/input/input39
1329[ 3024.888437] hid-generic 0003:046D:C245.001D: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input0
1330[ 3024.893322] hid-generic 0003:046D:C245.001E: hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:0b:00.3-4/input1
1331[ 3025.159875] usb 3-1: reset low-speed USB device number 2 using xhci_hcd
1332[ 3025.526146] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.0/0003:046D:C31C.001F/input/input40
1333[ 3025.583764] hid-generic 0003:046D:C31C.001F: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:04:00.0-1/input0
1334[ 3025.607110] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0020/input/input41
1335[ 3025.663703] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:04.0/0000:04:00.0/usb3/3-1/3-1:1.1/0003:046D:C31C.0020/input/input42
1336[ 3025.663733] hid-generic 0003:046D:C31C.0020: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:04:00.0-1/input1
1337