· 9 years ago · Nov 06, 2016, 07:10 PM
1<6>[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpu
2<6>[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpuacct
3<5>[ 0.000000 / 01-01 00:00:00.000][0] Linux version 3.18.31-twrp-h918-1.0 (jc@westerley) (gcc version 6.1.1 20160711 (Linaro GCC 6.1-2016.08) ) #1 SMP PREEMPT Sun Nov 6 12:43:11 EST 2016
4<4>[ 0.000000 / 01-01 00:00:00.000][0] CPU: AArch64 Processor [511f2112] revision 2
5<6>[ 0.000000 / 01-01 00:00:00.000][0] alternatives: detected feature GIC system register CPU interface
6<6>[ 0.000000 / 01-01 00:00:00.000][0] L1_CACHE_BYTES (128) Cache Writeback Granule (128)
7<6>[ 0.000000 / 01-01 00:00:00.000][0] Machine: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP
8<6>[ 0.000000 / 01-01 00:00:00.000][0] efi: Getting EFI parameters from FDT:
9<6>[ 0.000000 / 01-01 00:00:00.000][0] efi: UEFI not found.
10<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 40 MiB
11<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'peripheral_region@8e900000': base 0x000000008e900000, size 45 MiB
12<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088000000, size 105 MiB
13<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
14<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'ramoops_region@c0000000': base 0x00000000c0000000, size 1 MiB
15<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: reserved region for node 'crash_fb_mem@c0100000': base 0x00000000c0100000, size 12 MiB
16<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000085800000, size 40 MiB
17<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
18<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x000000008e900000, size 45 MiB
19<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node peripheral_region@8e900000, compatible id removed-dma-pool
20<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
21<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
22<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
23<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
24<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
25<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
26<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
27<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
28<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
29<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x0000000088000000, size 105 MiB
30<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
31<6>[ 0.000000 / 01-01 00:00:00.000][0] Removed memory: created DMA memory pool at 0x00000000c0000000, size 1 MiB
32<6>[ 0.000000 / 01-01 00:00:00.000][0] Reserved memory: initialized node ramoops_region@c0000000, compatible id removed-dma-pool
33<6>[ 0.000000 / 01-01 00:00:00.000][0] cma: Reserved 32 MiB at 0x00000000f6800000
34<7>[ 0.000000 / 01-01 00:00:00.000][0] On node 0 totalpages: 992848
35<7>[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 7428 pages used for memmap
36<7>[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 0 pages reserved
37<7>[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 475392 pages, LIFO batch:31
38<7>[ 0.000000 / 01-01 00:00:00.000][0] Normal zone: 8086 pages used for memmap
39<7>[ 0.000000 / 01-01 00:00:00.000][0] Normal zone: 517456 pages, LIFO batch:31
40<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: probing for conduit method from DT.
41<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: PSCIv1.0 detected in firmware.
42<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: Using standard PSCI v0.2 function IDs
43<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
44<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
45<6>[ 0.000000 / 01-01 00:00:00.000][0] psci: Initializing psci_cpu_init
46<6>[ 0.000000 / 01-01 00:00:00.000][0] PERCPU: Embedded 13 pages/cpu @ffffffc0fe318000 s22144 r0 d31104 u53248
47<7>[ 0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: s22144 r0 d31104 u53248 alloc=13*4096
48<7>[ 0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
49<4>[ 0.000000 / 01-01 00:00:00.000][0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 977334
50<6>[ 0.000000 / 01-01 00:00:00.000][0] [LGE-HW_REV] board_revno_setup : [LGE-HW-REV] Rev.rev_10
51<6>[ 0.000000 / 01-01 00:00:00.000][0] CCMODE: CC mode disabled
52<6>[ 0.000000 / 01-01 00:00:00.000][0] LGE BOOT REASON: 0x77665502
53<6>[ 0.000000 / 01-01 00:00:00.000][0] [LGE-CD] boot_cable_setup : Boot cable : 400MA 8
54<6>[ 0.000000 / 01-01 00:00:00.000][0] [LGE-BATT-ID] battery_information_setup : Battery : SW3800_VC0 187
55<4>[ 0.000000 / 01-01 00:00:00.000][0] androidboot.dlcomplete = 0
56<6>[ 0.000000 / 01-01 00:00:00.000][0] PID hash table entries: 4096 (order: 3, 32768 bytes)
57<6>[ 0.000000 / 01-01 00:00:00.000][0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
58<6>[ 0.000000 / 01-01 00:00:00.000][0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
59<4>[ 0.000000 / 01-01 00:00:00.000][0] Memory: 3666452K/3971392K available (12740K kernel code, 1636K rwdata, 5592K rodata, 508K init, 2544K bss, 304940K reserved)
60<5>[ 0.000000 / 01-01 00:00:00.000][0] Virtual kernel memory layout:
61<5>[ 0.000000 / 01-01 00:00:00.000][0] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
62<5>[ 0.000000 / 01-01 00:00:00.000][0] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
63<5>[ 0.000000 / 01-01 00:00:00.000][0] 0xffffffbdc0000000 - 0xffffffbdc3f95400 ( 63 MB actual)
64<5>[ 0.000000 / 01-01 00:00:00.000][0] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
65<5>[ 0.000000 / 01-01 00:00:00.000][0] fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
66<5>[ 0.000000 / 01-01 00:00:00.000][0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
67<5>[ 0.000000 / 01-01 00:00:00.000][0] memory : 0xffffffc000000000 - 0xffffffc0fe550000 ( 4069 MB)
68<5>[ 0.000000 / 01-01 00:00:00.000][0] .init : 0xffffffc00126a000 - 0xffffffc0012e9000 ( 508 KB)
69<6>[ 0.000000 / 01-01 00:00:00.000][0] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
70<6>[ 0.000000 / 01-01 00:00:00.000][0] HMP scheduling enabled.
71<6>[ 0.000000 / 01-01 00:00:00.000][0] Preemptible hierarchical RCU implementation.
72<6>[ 0.000000 / 01-01 00:00:00.000][0] RCU dyntick-idle grace-period acceleration is enabled.
73<6>[ 0.000000 / 01-01 00:00:00.000][0] NR_IRQS:64 nr_irqs:64 0
74<6>[ 0.000000 / 01-01 00:00:00.000][0] CPU0: found redistributor 0 region 0:0x0000000009c00000
75<4>[ 0.000000 / 01-01 00:00:00.000][0] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
76<3>[ 0.000000 / 01-01 00:00:00.000][0] MPM 1 irq mapping errored -517
77<6>[ 0.000000 / 01-01 00:00:00.000][0] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
78<6>[ 0.000004 / 01-01 00:00:00.000][0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
79<6>[ 0.000020 / 01-01 00:00:00.000][0] Switched to clocksource arch_sys_counter
80<6>[ 0.000842 / 01-01 00:00:00.000][0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
81<6>[ 0.000857 / 01-01 00:00:00.000][0] pid_max: default: 32768 minimum: 301
82<6>[ 0.001752 / 01-01 00:00:00.000][0] Security Framework initialized
83<6>[ 0.001772 / 01-01 00:00:00.000][0] SELinux: Initializing.
84<7>[ 0.001806 / 01-01 00:00:00.000][0] SELinux: Starting in permissive mode
85<6>[ 0.001843 / 01-01 00:00:00.000][0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
86<6>[ 0.001854 / 01-01 00:00:00.000][0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
87<6>[ 0.002385 / 01-01 00:00:00.000][0] Initializing cgroup subsys freezer
88<6>[ 0.002404 / 01-01 00:00:00.000][0] Initializing cgroup subsys net_cls
89<4>[ 0.002662 / 01-01 00:00:00.000][0] /cpus/cpu@0: Unknown CPU type
90<4>[ 0.002675 / 01-01 00:00:00.000][0] /cpus/cpu@1: Unknown CPU type
91<4>[ 0.002687 / 01-01 00:00:00.000][0] /cpus/cpu@100: Unknown CPU type
92<4>[ 0.002699 / 01-01 00:00:00.000][0] /cpus/cpu@101: Unknown CPU type
93<6>[ 0.002732 / 01-01 00:00:00.000][0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
94<6>[ 0.002756 / 01-01 00:00:00.000][0] EFI services will not be available.
95<4>[ 0.010649 / 01-01 00:00:00.000][0]
96<4>[ 0.010649 / 01-01 00:00:00.000][0] **********************************************************
97<4>[ 0.010664 / 01-01 00:00:00.000][0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
98<4>[ 0.010671 / 01-01 00:00:00.000][0] ** **
99<4>[ 0.010677 / 01-01 00:00:00.000][0] ** trace_printk() being used. Allocating extra memory. **
100<4>[ 0.010684 / 01-01 00:00:00.000][0] ** **
101<4>[ 0.010690 / 01-01 00:00:00.000][0] ** This means that this is a DEBUG kernel and it is **
102<4>[ 0.010697 / 01-01 00:00:00.000][0] ** unsafe for produciton use. **
103<4>[ 0.010703 / 01-01 00:00:00.000][0] ** **
104<4>[ 0.010710 / 01-01 00:00:00.000][0] ** If you see this message and you are not debugging **
105<4>[ 0.010716 / 01-01 00:00:00.000][0] ** the kernel, report this immediately to your vendor! **
106<4>[ 0.010722 / 01-01 00:00:00.000][0] ** **
107<4>[ 0.010729 / 01-01 00:00:00.000][0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
108<4>[ 0.010735 / 01-01 00:00:00.000][0] **********************************************************
109<6>[ 0.011398 / 01-01 00:00:00.000][0] MSM Memory Dump base table set up
110<6>[ 0.011419 / 01-01 00:00:00.000][0] MSM Memory Dump apps data table set up
111<6>[ 0.012628 / 01-01 00:00:00.000][0] panic-handler: reserved[@0xc0100000+@0xc00000)
112<6>[ 0.014304 / 01-01 00:00:00.000][0] clock-cpu-8996: configuring clocks for the perf cluster
113<6>[ 0.014480 / 01-01 00:00:00.000][0] cpu_clock_8996_early_init: finished CPU clock configuration
114<6>[ 0.016908 / 01-01 00:00:00.000][1] CPU1: Booted secondary processor
115<6>[ 0.016931 / 01-01 00:00:00.000][1] CPU1: found redistributor 1 region 0:0x0000000009c40000
116<6>[ 0.019351 / 01-01 00:00:00.000][2] CPU2: Booted secondary processor
117<6>[ 0.019402 / 01-01 00:00:00.000][2] CPU2: found redistributor 100 region 0:0x0000000009c80000
118<6>[ 0.021635 / 01-01 00:00:00.019][3] CPU3: Booted secondary processor
119<6>[ 0.021652 / 01-01 00:00:00.019][3] CPU3: found redistributor 101 region 0:0x0000000009cc0000
120<6>[ 0.021794 / 01-01 00:00:00.019][0] Brought up 4 CPUs
121<6>[ 0.021848 / 01-01 00:00:00.019][0] SMP: Total of 4 processors activated.
122<6>[ 0.026822 / 01-01 00:00:00.019][0] DMI not present or invalid.
123<6>[ 0.034535 / 01-01 00:00:00.029][0] pinctrl core: initialized pinctrl subsystem
124<6>[ 0.034929 / 01-01 00:00:00.029][0] regulator-dummy: no parameters
125<6>[ 0.099024 / 01-01 00:00:00.089][0] NET: Registered protocol family 16
126<6>[ 0.130084 / 01-01 00:00:00.129][1] cpuidle: using governor ladder
127<6>[ 0.140084 / 01-01 00:00:00.139][1] cpuidle: using governor menu
128<6>[ 0.200064 / 01-01 00:00:00.199][1] cpuidle: using governor qcom
129<6>[ 0.201288 / 01-01 00:00:00.199][1] vdso: 2 pages (1 code @ ffffffc00130d000, 1 data @ ffffffc00130c000)
130<6>[ 0.201703 / 01-01 00:00:00.199][1] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
131<6>[ 0.202543 / 01-01 00:00:00.199][1] DMA: preallocated 2048 KiB pool for atomic allocations
132<3>[ 0.202805 / 01-01 00:00:00.199][1] msm_smem_init: unable to create logging context
133<3>[ 0.202844 / 01-01 00:00:00.199][1] msm_smd_init: unable to create SMD logging context
134<3>[ 0.202855 / 01-01 00:00:00.199][1] msm_smd_init: unable to create SMSM logging context
135<3>[ 0.203148 / 01-01 00:00:00.199][0] <CORE> glink_init: unable to create log context
136<3>[ 0.203348 / 01-01 00:00:00.199][0] <CORE> glink_core_register_transport: unable to create log context for [dsps:smd_trans]
137<3>[ 0.203518 / 01-01 00:00:00.199][1] <CORE> glink_core_register_transport: unable to create log context for [lpass:smd_trans]
138<3>[ 0.203671 / 01-01 00:00:00.199][0] <CORE> glink_core_register_transport: unable to create log context for [mpss:smd_trans]
139<3>[ 0.203791 / 01-01 00:00:00.199][0] <CORE> glink_core_register_transport: unable to create log context for [wcnss:smd_trans]
140<3>[ 0.203907 / 01-01 00:00:00.199][0] <CORE> glink_core_register_transport: unable to create log context for [rpm:smd_trans]
141<6>[ 0.217032 / 01-01 00:00:00.209][0] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
142<6>[ 0.218030 / 01-01 00:00:00.209][0] sps:sps is ready.
143<6>[ 0.219215 / 01-01 00:00:00.209][0] i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_default, deferring probe
144<6>[ 0.219659 / 01-01 00:00:00.209][0] i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_default, deferring probe
145<6>[ 0.220260 / 01-01 00:00:00.219][0] i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe
146<3>[ 0.222403 / 01-01 00:00:00.219][0] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
147<3>[ 0.250678 / 01-01 00:00:00.249][0] smd_channel_probe_now: allocation table not initialized
148<3>[ 0.251006 / 01-01 00:00:00.249][0] smd_channel_probe_now: allocation table not initialized
149<3>[ 0.251297 / 01-01 00:00:00.249][0] smd_channel_probe_now: allocation table not initialized
150<3>[ 0.251594 / 01-01 00:00:00.249][0] smd_channel_probe_now: allocation table not initialized
151<6>[ 0.251865 / 01-01 00:00:00.249][0] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
152<6>[ 0.252195 / 01-01 00:00:00.249][0] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
153<6>[ 0.253019 / 01-01 00:00:00.249][0] msm_rpm_dev_probe: APSS-RPM communication over GLINK
154<3>[ 0.261451 / 01-01 00:00:00.259][2] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
155<3>[ 0.263001 / 01-01 00:00:00.259][2] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
156<6>[ 0.268085 / 01-01 00:00:00.259][2] pmi8994_s2: 400 <--> 1015 mV at 570 mV normal idle
157<6>[ 0.268731 / 01-01 00:00:00.259][2] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8e900000
158<6>[ 0.269026 / 01-01 00:00:00.259][2] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8e900000
159<6>[ 0.269346 / 01-01 00:00:00.259][2] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8e900000
160<6>[ 0.269716 / 01-01 00:00:00.259][2] platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
161<6>[ 0.272417 / 01-01 00:00:00.269][2] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
162<6>[ 0.272494 / 01-01 00:00:00.269][2] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
163<3>[ 0.272506 / 01-01 00:00:00.269][2] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
164<6>[ 0.272521 / 01-01 00:00:00.269][2] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
165<3>[ 0.272534 / 01-01 00:00:00.269][2] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
166<6>[ 0.277475 / 01-01 00:00:00.269][2] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
167<3>[ 0.278551 / 01-01 00:00:00.269][3] <CORE> glink_core_register_transport: unable to create log context for [mpss:smem]
168<3>[ 0.279314 / 01-01 00:00:00.269][3] <CORE> glink_core_register_transport: unable to create log context for [lpass:smem]
169<3>[ 0.280092 / 01-01 00:00:00.279][3] <CORE> glink_core_register_transport: unable to create log context for [dsps:smem]
170<3>[ 0.280663 / 01-01 00:00:00.279][3] <CORE> glink_core_register_transport: unable to create log context for [rpm:smem]
171<3>[ 0.280788 / 01-01 00:00:00.279][0] smd_channel_probe_now: allocation table not initialized
172<6>[ 0.281095 / 01-01 00:00:00.279][1] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
173<6>[ 0.281780 / 01-01 00:00:00.279][3] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
174<6>[ 0.281881 / 01-01 00:00:00.279][3] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
175<6>[ 0.282045 / 01-01 00:00:00.279][3] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
176<6>[ 0.282322 / 01-01 00:00:00.279][3] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
177<6>[ 0.284269 / 01-01 00:00:00.279][3] apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
178<6>[ 0.284621 / 01-01 00:00:00.279][3] apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
179<6>[ 0.284969 / 01-01 00:00:00.279][3] apcc_l3_mem_acc_corner: 0 <--> 0 mV
180<6>[ 0.285303 / 01-01 00:00:00.279][3] gfx_mem_acc_corner: 0 <--> 0 mV
181<6>[ 0.285710 / 01-01 00:00:00.279][3] kryo0-retention: 468 <--> 892 mV at 520 mV
182<6>[ 0.285919 / 01-01 00:00:00.279][3] kryo0: 468 <--> 892 mV at 754 mV
183<6>[ 0.286061 / 01-01 00:00:00.279][3] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
184<6>[ 0.286367 / 01-01 00:00:00.279][3] kryo1-retention: 468 <--> 892 mV at 520 mV
185<6>[ 0.286578 / 01-01 00:00:00.279][3] kryo1: 468 <--> 892 mV at 754 mV
186<6>[ 0.286719 / 01-01 00:00:00.279][3] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
187<6>[ 0.291299 / 01-01 00:00:00.289][3] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8e900000
188<3>[ 0.292672 / 01-01 00:00:00.289][3] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
189<4>[ 0.311903 / 01-01 00:00:00.309][3] __of_mpm_init(): MPM driver mapping exists
190<6>[ 0.317064 / 01-01 00:00:00.309][3] console [pstore-1] enabled
191<6>[ 0.317078 / 01-01 00:00:00.309][3] pstore: Registered ramoops as persistent store backend
192<6>[ 0.317091 / 01-01 00:00:00.309][3] ramoops: attached 0x80000@0xc0000000, ecc: 0/0
193<6>[ 0.318618 / 01-01 00:00:00.309][3] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
194<3>[ 0.318712 / 01-01 00:00:00.309][3] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
195<3>[ 0.318730 / 01-01 00:00:00.309][3] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
196<6>[ 0.320294 / 01-01 00:00:00.319][1] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
197<3>[ 0.320418 / 01-01 00:00:00.319][1] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
198<3>[ 0.320436 / 01-01 00:00:00.319][1] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
199<6>[ 0.321138 / 01-01 00:00:00.319][1] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
200<3>[ 0.321246 / 01-01 00:00:00.319][1] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
201<3>[ 0.321265 / 01-01 00:00:00.319][1] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
202<6>[ 0.321941 / 01-01 00:00:00.319][1] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
203<3>[ 0.322062 / 01-01 00:00:00.319][1] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
204<3>[ 0.322079 / 01-01 00:00:00.319][1] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
205<3>[ 0.322300 / 01-01 00:00:00.319][1] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
206<6>[ 0.323140 / 01-01 00:00:00.319][1] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
207<6>[ 0.323610 / 01-01 00:00:00.319][1] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
208<6>[ 0.324021 / 01-01 00:00:00.319][1] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
209<6>[ 0.324479 / 01-01 00:00:00.319][1] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
210<6>[ 0.324889 / 01-01 00:00:00.319][1] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
211<6>[ 0.325337 / 01-01 00:00:00.319][1] pm8994_s3: 1300 mV normal idle
212<6>[ 0.325793 / 01-01 00:00:00.319][1] pm8994_s4: 1800 mV normal idle
213<6>[ 0.326232 / 01-01 00:00:00.319][1] pm8994_s5: 2150 mV normal idle
214<6>[ 0.326679 / 01-01 00:00:00.319][1] pm8994_s7: 800 mV normal idle
215<6>[ 0.327113 / 01-01 00:00:00.319][1] pm8994_l1: 1000 mV normal idle
216<6>[ 0.327572 / 01-01 00:00:00.319][1] pm8994_l2: 1250 mV normal idle
217<6>[ 0.328303 / 01-01 00:00:00.319][1] pm8994_l3: 1050 mV normal idle
218<6>[ 0.328777 / 01-01 00:00:00.319][1] pm8994_l4: 1225 mV normal idle
219<6>[ 0.329224 / 01-01 00:00:00.319][1] pm8994_l6: 1200 mV normal idle
220<6>[ 0.329662 / 01-01 00:00:00.319][1] pm8994_l8: 1800 mV normal idle
221<6>[ 0.330147 / 01-01 00:00:00.329][1] pm8994_l9: 1800 mV normal idle
222<6>[ 0.330622 / 01-01 00:00:00.329][1] pm8994_l10: 1800 mV normal idle
223<6>[ 0.331056 / 01-01 00:00:00.329][1] pm8994_l11: 1200 mV normal idle
224<6>[ 0.331517 / 01-01 00:00:00.329][1] pm8994_l12: 1800 mV normal idle
225<6>[ 0.332410 / 01-01 00:00:00.329][1] pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
226<6>[ 0.332891 / 01-01 00:00:00.329][1] pm8994_l14: 1800 mV normal idle
227<6>[ 0.333750 / 01-01 00:00:00.329][1] pm8994_l15: 1800 mV normal idle
228<6>[ 0.334225 / 01-01 00:00:00.329][1] pm8994_l16: 2700 mV normal idle
229<6>[ 0.334668 / 01-01 00:00:00.329][1] pm8994_l17: 2800 mV normal idle
230<6>[ 0.335473 / 01-01 00:00:00.329][1] pm8994_l18: 2200 mV normal idle
231<6>[ 0.335899 / 01-01 00:00:00.329][1] pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
232<6>[ 0.336355 / 01-01 00:00:00.329][1] pm8994_l19: 3000 mV normal idle
233<6>[ 0.336788 / 01-01 00:00:00.329][1] pm8994_l20: 2950 mV normal idle
234<6>[ 0.337245 / 01-01 00:00:00.329][1] pm8994_l21: 2950 mV normal idle
235<6>[ 0.338082 / 01-01 00:00:00.329][1] pm8994_l22: 3300 mV normal idle
236<6>[ 0.338559 / 01-01 00:00:00.329][1] pm8994_l23: 2800 mV normal idle
237<6>[ 0.339005 / 01-01 00:00:00.329][1] pm8994_l24: 3075 mV normal idle
238<6>[ 0.339475 / 01-01 00:00:00.329][1] pm8994_l25: 1200 mV normal idle
239<6>[ 0.340314 / 01-01 00:00:00.339][1] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
240<6>[ 0.340733 / 01-01 00:00:00.339][1] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
241<6>[ 0.341181 / 01-01 00:00:00.339][1] pm8994_l27: 1000 mV normal idle
242<6>[ 0.341642 / 01-01 00:00:00.339][1] pm8994_l28: 925 mV normal idle
243<6>[ 0.342403 / 01-01 00:00:00.339][1] pm8994_l29: 2800 mV normal idle
244<6>[ 0.342887 / 01-01 00:00:00.339][1] pm8994_l30: 1800 mV normal idle
245<6>[ 0.343324 / 01-01 00:00:00.339][1] pm8994_l32: 1800 mV normal idle
246<6>[ 0.343758 / 01-01 00:00:00.339][1] pm8994_lvs1: no parameters
247<6>[ 0.344160 / 01-01 00:00:00.339][1] pm8994_lvs2: no parameters
248<6>[ 0.344589 / 01-01 00:00:00.339][1] pmi8994_s1: 1025 mV normal idle
249<6>[ 0.345017 / 01-01 00:00:00.339][1] pmi8994_boost_5v: no parameters
250<3>[ 0.345196 / 01-01 00:00:00.339][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
251<3>[ 0.345302 / 01-01 00:00:00.339][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
252<6>[ 0.345642 / 01-01 00:00:00.339][1] pmi8994_boost_pin_ctrl: no parameters
253<3>[ 0.345744 / 01-01 00:00:00.339][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
254<3>[ 0.345843 / 01-01 00:00:00.339][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
255<6>[ 0.346232 / 01-01 00:00:00.339][1] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
256<6>[ 0.346594 / 01-01 00:00:00.339][1] pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
257<6>[ 0.346836 / 01-01 00:00:00.339][1] pm8994_s11_avs_limit: 470 <--> 1140 mV
258<6>[ 0.346951 / 01-01 00:00:00.339][1] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
259<6>[ 0.347960 / 01-01 00:00:00.339][1] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
260<6>[ 0.347998 / 01-01 00:00:00.339][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
261<6>[ 0.348472 / 01-01 00:00:00.339][1] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
262<3>[ 0.348495 / 01-01 00:00:00.339][1] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
263<6>[ 0.348513 / 01-01 00:00:00.339][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
264<3>[ 0.348529 / 01-01 00:00:00.339][1] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
265<3>[ 0.349069 / 01-01 00:00:00.339][1] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
266<6>[ 0.349560 / 01-01 00:00:00.339][1] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
267<3>[ 0.349669 / 01-01 00:00:00.339][1] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
268<3>[ 0.349686 / 01-01 00:00:00.339][1] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
269<6>[ 0.350461 / 01-01 00:00:00.349][1] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
270<3>[ 0.350574 / 01-01 00:00:00.349][1] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
271<3>[ 0.350592 / 01-01 00:00:00.349][1] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
272<6>[ 0.351269 / 01-01 00:00:00.349][1] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
273<3>[ 0.351373 / 01-01 00:00:00.349][1] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
274<3>[ 0.351389 / 01-01 00:00:00.349][1] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
275<6>[ 0.352050 / 01-01 00:00:00.349][1] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
276<3>[ 0.352171 / 01-01 00:00:00.349][1] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
277<3>[ 0.352188 / 01-01 00:00:00.349][1] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
278<3>[ 0.352582 / 01-01 00:00:00.349][1] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
279<6>[ 0.372158 / 01-01 00:00:00.369][1] gcc_mss_q6_bimc_axi_clk
280<6>[ 0.372187 / 01-01 00:00:00.369][1] CBCR: 0x80000001
281<4>[ 0.372200 / 01-01 00:00:00.369][1] ------------[ cut here ]------------
282<4>[ 0.372224 / 01-01 00:00:00.369][1] WARNING: CPU: 1 PID: 6 at ../drivers/clk/msm/clock-local2.c:671 branch_clk_halt_check+0x100/0x12c()
283<4>[ 0.372237 / 01-01 00:00:00.369][1] gcc_mss_q6_bimc_axi_clk: status stuck off
284<4>[ 0.372252 / 01-01 00:00:00.369][1] CPU: 1 PID: 6 Comm: kworker/u8:0 Not tainted 3.18.31-twrp-h918-1.0 #1
285<4>[ 0.372267 / 01-01 00:00:00.369][1] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3.x + PMI8996 MTP (DT)
286<4>[ 0.372287 / 01-01 00:00:00.369][1] Workqueue: deferwq deferred_probe_work_func
287<0>[ 0.372301 / 01-01 00:00:00.369][1] Call trace:
288<4>[ 0.372321 / 01-01 00:00:00.369][1] [<ffffffc0000886c0>] dump_backtrace+0x0/0xf0
289<4>[ 0.372336 / 01-01 00:00:00.369][1] [<ffffffc0000887c4>] show_stack+0x14/0x1c
290<4>[ 0.372355 / 01-01 00:00:00.369][1] [<ffffffc000cce270>] dump_stack+0x84/0xac
291<4>[ 0.372372 / 01-01 00:00:00.369][1] [<ffffffc00009f304>] warn_slowpath_common+0x8c/0xb8
292<4>[ 0.372386 / 01-01 00:00:00.369][1] [<ffffffc00009f3a0>] warn_slowpath_fmt+0x44/0x4c
293<4>[ 0.372400 / 01-01 00:00:00.369][1] [<ffffffc0009df5fc>] branch_clk_halt_check+0x100/0x12c
294<4>[ 0.372414 / 01-01 00:00:00.369][1] [<ffffffc0009e0fd0>] branch_clk_enable+0x100/0x118
295<4>[ 0.372428 / 01-01 00:00:00.369][1] [<ffffffc0009db870>] clk_enable+0x130/0x1a0
296<4>[ 0.372441 / 01-01 00:00:00.369][1] [<ffffffc0009dc358>] __handoff_clk+0x294/0x2e8
297<4>[ 0.372454 / 01-01 00:00:00.369][1] [<ffffffc0009dcb7c>] msm_clock_register+0x1f0/0x22c
298<4>[ 0.372467 / 01-01 00:00:00.369][1] [<ffffffc0009dcc38>] of_msm_clock_register+0x80/0x90
299<4>[ 0.372483 / 01-01 00:00:00.369][1] [<ffffffc0009ec480>] msm_gcc_8996_probe+0x390/0x39c
300<4>[ 0.372497 / 01-01 00:00:00.369][1] [<ffffffc0004f8ed8>] platform_drv_probe+0x38/0x88
301<4>[ 0.372510 / 01-01 00:00:00.369][1] [<ffffffc0004f788c>] driver_probe_device+0x2c0/0x384
302<4>[ 0.372522 / 01-01 00:00:00.369][1] [<ffffffc0004f797c>] __device_attach+0x2c/0x4c
303<4>[ 0.372537 / 01-01 00:00:00.369][1] [<ffffffc0004f6310>] bus_for_each_drv+0x88/0x90
304<4>[ 0.372549 / 01-01 00:00:00.369][1] [<ffffffc0004f7ab4>] device_attach+0x88/0x9c
305<4>[ 0.372562 / 01-01 00:00:00.369][1] [<ffffffc0004f64ac>] bus_probe_device+0x2c/0xa0
306<4>[ 0.372575 / 01-01 00:00:00.369][1] [<ffffffc0004f70cc>] deferred_probe_work_func+0x84/0x98
307<4>[ 0.372593 / 01-01 00:00:00.369][1] [<ffffffc0000b34ac>] process_one_work+0x234/0x410
308<4>[ 0.372606 / 01-01 00:00:00.369][1] [<ffffffc0000b399c>] worker_thread+0x2d8/0x394
309<4>[ 0.372618 / 01-01 00:00:00.369][1] [<ffffffc0000b81e0>] kthread+0xdc/0xe4
310<4>[ 0.372645 / 01-01 00:00:00.369][1] ---[ end trace 08f48ebec675dc96 ]---
311<6>[ 0.372817 / 01-01 00:00:00.369][1] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
312<6>[ 0.373875 / 01-01 00:00:00.369][1] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
313<6>[ 0.373910 / 01-01 00:00:00.369][1] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
314<6>[ 0.373925 / 01-01 00:00:00.369][1] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
315<6>[ 0.374299 / 01-01 00:00:00.369][1] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
316<6>[ 0.374319 / 01-01 00:00:00.369][1] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
317<6>[ 0.374335 / 01-01 00:00:00.369][1] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
318<6>[ 0.374716 / 01-01 00:00:00.369][1] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
319<6>[ 0.374736 / 01-01 00:00:00.369][1] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
320<6>[ 0.374749 / 01-01 00:00:00.369][1] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
321<6>[ 0.384107 / 01-01 00:00:00.379][1] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
322<6>[ 0.385960 / 01-01 00:00:00.379][1] pmi8994_boost_5v: no parameters
323<3>[ 0.386137 / 01-01 00:00:00.379][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
324<3>[ 0.386240 / 01-01 00:00:00.379][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
325<6>[ 0.386468 / 01-01 00:00:00.379][1] pmi8994_boost_pin_ctrl: no parameters
326<3>[ 0.386560 / 01-01 00:00:00.379][1] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
327<3>[ 0.386652 / 01-01 00:00:00.379][1] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
328<6>[ 0.387592 / 01-01 00:00:00.379][1] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
329<6>[ 0.387627 / 01-01 00:00:00.379][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
330<6>[ 0.387915 / 01-01 00:00:00.379][1] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
331<3>[ 0.387934 / 01-01 00:00:00.379][1] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
332<6>[ 0.387952 / 01-01 00:00:00.379][1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
333<3>[ 0.387967 / 01-01 00:00:00.379][1] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
334<6>[ 0.388623 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
335<6>[ 0.388645 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
336<6>[ 0.388660 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
337<6>[ 0.388674 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
338<6>[ 0.388688 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
339<6>[ 0.388704 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
340<6>[ 0.388968 / 01-01 00:00:00.379][1] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
341<6>[ 0.389192 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 605000 uV
342<6>[ 0.389210 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 705000 uV
343<6>[ 0.389224 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 815000 uV
344<6>[ 0.389236 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 970000 uV
345<6>[ 0.389336 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 346
346<6>[ 0.389350 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 528, quot_offset[ 7]= 140
347<6>[ 0.389363 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 749, quot_offset[ 7]= 220
348<6>[ 0.389376 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]=1026, quot_offset[ 7]= 275
349<6>[ 0.389519 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
350<6>[ 0.389533 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
351<6>[ 0.389546 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
352<6>[ 0.389559 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
353<6>[ 0.389571 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
354<6>[ 0.389586 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
355<6>[ 0.389720 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 605000 uV
356<6>[ 0.389733 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 705000 uV
357<6>[ 0.389746 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 815000 uV
358<6>[ 0.389759 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 970000 uV
359<6>[ 0.389808 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 346
360<6>[ 0.389821 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 528, quot_offset[ 7]= 140
361<6>[ 0.389834 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 749, quot_offset[ 7]= 220
362<6>[ 0.389846 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]=1026, quot_offset[ 7]= 275
363<6>[ 0.389954 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
364<6>[ 0.389967 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
365<6>[ 0.389981 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
366<6>[ 0.389994 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
367<6>[ 0.390006 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
368<6>[ 0.390020 / 01-01 00:00:00.379][1] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
369<6>[ 0.390397 / 01-01 00:00:00.389][1] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
370<6>[ 0.390647 / 01-01 00:00:00.389][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 595000 uV
371<6>[ 0.390663 / 01-01 00:00:00.389][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 685000 uV
372<6>[ 0.390677 / 01-01 00:00:00.389][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 745000 uV
373<6>[ 0.390690 / 01-01 00:00:00.389][1] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop=1010000 uV
374<6>[ 0.390808 / 01-01 00:00:00.389][1] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 329
375<6>[ 0.390822 / 01-01 00:00:00.389][1] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 489, quot_offset[ 7]= 120
376<6>[ 0.390835 / 01-01 00:00:00.389][1] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 611, quot_offset[ 7]= 120
377<6>[ 0.390848 / 01-01 00:00:00.389][1] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1087, quot_offset[ 7]= 475
378<6>[ 0.391343 / 01-01 00:00:00.389][1] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
379<6>[ 0.391499 / 01-01 00:00:00.389][1] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
380<6>[ 0.391737 / 01-01 00:00:00.389][1] apc0_cbf_corner: 0 <--> 0 mV at 0 mV
381<6>[ 0.395037 / 01-01 00:00:00.389][0] cpr3_regulator_measure_aging: apcc: average quotient delta=13 (count=10)
382<6>[ 0.395081 / 01-01 00:00:00.389][0] cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=1562 uV
383<6>[ 0.395616 / 01-01 00:00:00.389][0] apc1_corner: 0 <--> 0 mV at 0 mV
384<6>[ 0.397457 / 01-01 00:00:00.389][0] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
385<6>[ 0.397484 / 01-01 00:00:00.389][0] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
386<6>[ 0.397844 / 01-01 00:00:00.389][0] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 640000 uV
387<6>[ 0.397859 / 01-01 00:00:00.389][0] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 685000 uV
388<6>[ 0.397872 / 01-01 00:00:00.389][0] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 805000 uV
389<6>[ 0.397885 / 01-01 00:00:00.389][0] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 895000 uV
390<6>[ 0.398079 / 01-01 00:00:00.389][0] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
391<6>[ 0.398241 / 01-01 00:00:00.389][0] gfx_corner: 0 <--> 0 mV at 0 mV
392<6>[ 0.399601 / 01-01 00:00:00.389][2] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
393<3>[ 0.399703 / 01-01 00:00:00.389][2] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
394<6>[ 0.399719 / 01-01 00:00:00.389][2] i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
395<6>[ 0.400808 / 01-01 00:00:00.399][2] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
396<3>[ 0.400905 / 01-01 00:00:00.399][2] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
397<6>[ 0.400919 / 01-01 00:00:00.399][2] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
398<6>[ 0.401846 / 01-01 00:00:00.399][2] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
399<3>[ 0.401934 / 01-01 00:00:00.399][2] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
400<6>[ 0.401948 / 01-01 00:00:00.399][2] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
401<6>[ 0.402601 / 01-01 00:00:00.399][2] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
402<3>[ 0.402692 / 01-01 00:00:00.399][2] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
403<6>[ 0.402707 / 01-01 00:00:00.399][2] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
404<6>[ 0.403739 / 01-01 00:00:00.399][2] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
405<6>[ 0.405962 / 01-01 00:00:00.399][2] clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu0
406<6>[ 0.406008 / 01-01 00:00:00.399][2] clock-cpu-8996: set OPP pair (1593600000 Hz, 945000 uv) on cpu0
407<6>[ 0.406030 / 01-01 00:00:00.399][2] clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu1
408<6>[ 0.406071 / 01-01 00:00:00.399][2] clock-cpu-8996: set OPP pair (1593600000 Hz, 945000 uv) on cpu1
409<6>[ 0.406098 / 01-01 00:00:00.399][2] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu2
410<6>[ 0.406157 / 01-01 00:00:00.399][2] clock-cpu-8996: set OPP pair (2150400000 Hz, 995000 uv) on cpu2
411<6>[ 0.406179 / 01-01 00:00:00.399][2] clock-cpu-8996: set OPP pair (307200000 Hz, 615000 uv) on cpu3
412<6>[ 0.406232 / 01-01 00:00:00.399][2] clock-cpu-8996: set OPP pair (2150400000 Hz, 995000 uv) on cpu3
413<6>[ 0.406380 / 01-01 00:00:00.399][2] clock-cpu-8996: set OPP pair (307200000 Hz, 650000 uv) on soc:qcom,m4m
414<6>[ 0.406427 / 01-01 00:00:00.399][2] clock-cpu-8996: set OPP pair (1593600000 Hz, 945000 uv) on soc:qcom,m4m
415<6>[ 0.406805 / 01-01 00:00:00.399][2] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
416<6>[ 0.407181 / 01-01 00:00:00.399][2] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 570000 uV) on b00000.qcom,kgsl-3d0
417<6>[ 0.407210 / 01-01 00:00:00.399][2] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 895000 uV) on b00000.qcom,kgsl-3d0
418<6>[ 0.408777 / 01-01 00:00:00.399][2] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
419<6>[ 0.409007 / 01-01 00:00:00.399][2] pmi8994_boost_5v: no parameters
420<3>[ 0.409084 / 01-01 00:00:00.399][2] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
421<3>[ 0.409186 / 01-01 00:00:00.399][2] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
422<6>[ 0.409389 / 01-01 00:00:00.399][2] pmi8994_boost_pin_ctrl: no parameters
423<3>[ 0.409447 / 01-01 00:00:00.399][2] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
424<3>[ 0.409538 / 01-01 00:00:00.399][2] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
425<6>[ 0.410461 / 01-01 00:00:00.409][2] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
426<6>[ 0.410490 / 01-01 00:00:00.409][2] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
427<6>[ 0.410781 / 01-01 00:00:00.409][2] msm_thermal:update_cpu_freq [CPU0] : max freq = 1190400
428<3>[ 0.410798 / 01-01 00:00:00.409][2] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
429<6>[ 0.410812 / 01-01 00:00:00.409][2] msm_thermal:update_cpu_freq [CPU2] : max freq = 0
430<3>[ 0.410826 / 01-01 00:00:00.409][2] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
431<6>[ 0.410840 / 01-01 00:00:00.409][2] msm_thermal:update_cpu_freq [CPU2] : max freq = 1190400
432<3>[ 0.410852 / 01-01 00:00:00.409][2] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
433<6>[ 0.411950 / 01-01 00:00:00.409][2] msm_thermal:update_cpu_freq [CPU0] : max freq = 1593600
434<3>[ 0.411967 / 01-01 00:00:00.409][2] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
435<6>[ 0.411983 / 01-01 00:00:00.409][2] msm_thermal:update_cpu_freq [CPU2] : max freq = 4294967295
436<3>[ 0.411995 / 01-01 00:00:00.409][2] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
437<6>[ 0.412009 / 01-01 00:00:00.409][2] msm_thermal:update_cpu_freq [CPU2] : max freq = 2150400
438<3>[ 0.412021 / 01-01 00:00:00.409][2] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
439<6>[ 0.412152 / 01-01 00:00:00.409][3] pmi8994_boost_5v: no parameters
440<3>[ 0.412229 / 01-01 00:00:00.409][3] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
441<3>[ 0.412327 / 01-01 00:00:00.409][3] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
442<6>[ 0.412534 / 01-01 00:00:00.409][3] pmi8994_boost_pin_ctrl: no parameters
443<3>[ 0.412593 / 01-01 00:00:00.409][3] qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
444<3>[ 0.412682 / 01-01 00:00:00.409][3] rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
445<6>[ 0.464718 / 01-01 00:00:00.459][3] KPI: Bootloader start count = 42379
446<6>[ 0.464741 / 01-01 00:00:00.459][3] KPI: Bootloader end count = 239766
447<6>[ 0.464754 / 01-01 00:00:00.459][3] KPI: Bootloader display count = 59924
448<6>[ 0.464766 / 01-01 00:00:00.459][3] KPI: Bootloader load kernel count = 5854
449<6>[ 0.464780 / 01-01 00:00:00.459][3] KPI: Kernel MPM timestamp = 265123
450<6>[ 0.464791 / 01-01 00:00:00.459][3] KPI: Kernel MPM Clock frequency = 32768
451<6>[ 0.464818 / 01-01 00:00:00.459][3] socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=12
452<6>[ 0.464818 / 01-01 00:00:00.459][3] accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=477453917 num_pmics=2
453<3>[ 0.464861 / 01-01 00:00:00.459][3] [LGE_POWER] lge power!!!
454<6>[ 0.465126 / 01-01 00:00:00.459][3] gdsc_mmagic_bimc: no parameters
455<6>[ 0.465920 / 01-01 00:00:00.459][3] usb_otg_vreg: no parameters
456<3>[ 0.466000 / 01-01 00:00:00.459][3] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
457<3>[ 0.466104 / 01-01 00:00:00.459][3] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
458<6>[ 0.466815 / 01-01 00:00:00.459][3] vgaarb: loaded
459<5>[ 0.468346 / 01-01 00:00:00.459][3] SCSI subsystem initialized
460<6>[ 0.469409 / 01-01 00:00:00.459][3] usbcore: registered new interface driver usbfs
461<6>[ 0.469456 / 01-01 00:00:00.459][3] usbcore: registered new interface driver hub
462<6>[ 0.469614 / 01-01 00:00:00.459][3] usbcore: registered new device driver usb
463<4>[ 0.470014 / 01-01 00:00:00.459][3] soc:usb_nop_phy supply vcc not found, using dummy regulator
464<6>[ 0.470781 / 01-01 00:00:00.469][3] media: Linux media interface: v0.10
465<6>[ 0.470835 / 01-01 00:00:00.469][3] Linux video capture interface: v2.00
466<6>[ 0.580522 / 01-01 00:00:00.579][3] cpufreq: driver msm up and running
467<6>[ 0.581146 / 01-01 00:00:00.579][3] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_re