· 6 years ago · Dec 05, 2019, 01:02 PM
1[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x511f2112]
2[ 0.000000] Linux version 5.4.0-00009-gef2dd1cc3ca4 (ppisati@kathleen) (gcc version 9.2.1 20191130 (Ubuntu 9.2.1-21ubuntu1)) #1 SMP PREEMPT Thu Dec 5 11:33:42 UTC 2019
3[ 0.000000] Machine model: Qualcomm Technologies, Inc. DB820c
4[ 0.000000] efi: Getting EFI parameters from FDT:
5[ 0.000000] efi: UEFI not found.
6[ 0.000000] OF: reserved mem: OVERLAP DETECTED!
7 gpu@8f200000 (0x0000000090b00000--0x0000000091500000) overlaps with slpi@90b00000 (0x0000000090b00000--0x0000000091500000)
8[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090b00000, size 10 MiB
9[ 0.000000] OF: reserved mem: initialized node gpu@8f200000, compatible id shared-dma-pool
10[ 0.000000] cma: Reserved 32 MiB at 0x00000000de000000
11[ 0.000000] NUMA: No NUMA configuration found
12[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000015ea4efff]
13[ 0.000000] NUMA: NODE_DATA [mem 0x15e460800-0x15e461fff]
14[ 0.000000] Zone ranges:
15[ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff]
16[ 0.000000] Normal [mem 0x0000000100000000-0x000000015ea4efff]
17[ 0.000000] Movable zone start for each node
18[ 0.000000] Early memory node ranges
19[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000857fffff]
20[ 0.000000] node 0: [mem 0x0000000091700000-0x00000000a1dfffff]
21[ 0.000000] node 0: [mem 0x00000000a2000000-0x00000000dfffffff]
22[ 0.000000] node 0: [mem 0x0000000100000000-0x000000015ea4efff]
23[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000015ea4efff]
24[ 0.000000] On node 0 totalpages: 731471
25[ 0.000000] DMA32 zone: 5372 pages used for memmap
26[ 0.000000] DMA32 zone: 0 pages reserved
27[ 0.000000] DMA32 zone: 343808 pages, LIFO batch:63
28[ 0.000000] Normal zone: 6058 pages used for memmap
29[ 0.000000] Normal zone: 387663 pages, LIFO batch:63
30[ 0.000000] psci: probing for conduit method from DT.
31[ 0.000000] psci: PSCIv1.0 detected in firmware.
32[ 0.000000] psci: Using standard PSCI v0.2 function IDs
33[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
34[ 0.000000] psci: SMC Calling Convention v1.0
35[ 0.000000] psci: OSI mode supported.
36[ 0.000000] percpu: Embedded 22 pages/cpu s52952 r8192 d28968 u90112
37[ 0.000000] pcpu-alloc: s52952 r8192 d28968 u90112 alloc=22*4096
38[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
39[ 0.000000] Detected PIPT I-cache on CPU0
40[ 0.000000] CPU features: detected: GIC system register CPU interface
41[ 0.000000] CPU features: detected: Qualcomm erratum 1009, ARM erratum 1286807
42[ 0.000000] CPU features: detected: Qualcomm Technologies Falkor/Kryo erratum 1003
43[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
44[ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
45[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 720041
46[ 0.000000] Policy zone: Normal
47[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 root=/dev/mmcblk0p9 net.ifnames=0 init=/lib/systemd/systemd rw rootwait panic=-1
48[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
49[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
50[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
51[ 0.000000] software IO TLB: mapped [mem 0xda000000-0xde000000] (64MB)
52[ 0.000000] Memory: 2723272K/2925884K available (11900K kernel code, 1860K rwdata, 6428K rodata, 5056K init, 450K bss, 169844K reserved, 32768K cma-reserved)
53[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
54[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
55[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
56[ 0.000000] Tasks RCU enabled.
57[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
58[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
59[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
60[ 0.000000] GIC: enabling workaround for GICv3: Qualcomm MSM8996 broken firmware
61[ 0.000000] GICv3: 608 SPIs implemented
62[ 0.000000] GICv3: 0 Extended SPIs implemented
63[ 0.000000] GICv3: Distributor has no Range Selector support
64[ 0.000000] GICv3: 16 PPIs implemented
65[ 0.000000] GICv3: VLPI support, no direct LPI support
66[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000
67[ 0.000000] ITS: No ITS available, not enabling LPIs
68[ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x44c with crng_init=0
69[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
70[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
71[ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
72[ 0.000330] Console: colour dummy device 80x25
73[ 0.000408] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
74[ 0.000418] pid_max: default: 32768 minimum: 301
75[ 0.000489] LSM: Security Framework initializing
76[ 0.000538] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
77[ 0.000550] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
78[ 0.023469] ASID allocator initialised with 32768 entries
79[ 0.031462] rcu: Hierarchical SRCU implementation.
80[ 0.041595] EFI services will not be available.
81[ 0.047524] smp: Bringing up secondary CPUs ...
82[ 0.080071] Detected PIPT I-cache on CPU1
83[ 0.080099] GICv3: CPU1: found redistributor 1 region 0:0x0000000009c40000
84[ 0.080137] CPU1: Booted secondary processor 0x0000000001 [0x511f2112]
85[ 0.114882] Detected PIPT I-cache on CPU2
86[ 0.115681] GICv3: CPU2: found redistributor 100 region 0:0x0000000009c80000
87[ 0.116551] CPU2: Booted secondary processor 0x0000000100 [0x511f2052]
88[ 0.154652] Detected PIPT I-cache on CPU3
89[ 0.155421] GICv3: CPU3: found redistributor 101 region 0:0x0000000009cc0000
90[ 0.156298] CPU3: Booted secondary processor 0x0000000101 [0x511f2052]
91[ 0.159915] smp: Brought up 1 node, 4 CPUs
92[ 0.159951] SMP: Total of 4 processors activated.
93[ 0.159966] CPU features: detected: 32-bit EL0 Support
94[ 0.159975] CPU features: detected: CRC32 instructions
95[ 0.643509] CPU: All CPU(s) started at EL1
96[ 0.643973] alternatives: patching kernel code
97[ 0.646258] devtmpfs: initialized
98[ 0.656969] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
99[ 0.657003] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
100[ 0.657664] pinctrl core: initialized pinctrl subsystem
101[ 0.659198] DMI not present or invalid.
102[ 0.659626] NET: Registered protocol family 16
103[ 0.661974] DMA: preallocated 256 KiB pool for atomic allocations
104[ 0.661990] audit: initializing netlink subsys (disabled)
105[ 0.663347] audit: type=2000 audit(0.260:1): state=initialized audit_enabled=0 res=1
106[ 0.665260] cpuidle: using governor menu
107[ 0.665502] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers.
108[ 0.668576] Serial: AMBA PL011 UART driver
109[ 0.672803] ------------[ cut here ]------------
110[ 0.672815] aggre0_noc status stuck at 'off'
111[ 0.672846] WARNING: CPU: 1 PID: 1 at drivers/clk/qcom/gdsc.c:145 gdsc_toggle_logic+0xc8/0xd0
112[ 0.672853] Modules linked in:
113[ 0.672864] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00009-gef2dd1cc3ca4 #1
114[ 0.672869] Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
115[ 0.672877] pstate: 60000005 (nZCv daif -PAN -UAO)
116[ 0.672884] pc : gdsc_toggle_logic+0xc8/0xd0
117[ 0.672890] lr : gdsc_toggle_logic+0xc8/0xd0
118[ 0.672894] sp : ffff80001003b7c0
119[ 0.672899] x29: ffff80001003b7c0 x28: 0000000000282000
120[ 0.672906] x27: 0000000000fff006 x26: ffff800011836160
121[ 0.672913] x25: 0000000000000000 x24: 0000000000000000
122[ 0.672920] x23: ffff0000d99a6d80 x22: 0000000000000000
123[ 0.672927] x21: 0000000000000001 x20: ffff800011836160
124[ 0.672933] x19: 00000000ffffff92 x18: 0000000000000010
125[ 0.672940] x17: 00000000e5981335 x16: 00000000f514f5b9
126[ 0.672946] x15: ffff0000d98a0470 x14: ffffffffffffffff
127[ 0.672952] x13: ffff80009003b4a7 x12: ffff80001003b4af
128[ 0.672959] x11: ffff800011782000 x10: ffff8000119415c0
129[ 0.672965] x9 : 00000000fffffffe x8 : 2766666f27207461
130[ 0.672972] x7 : 206b637574732073 x6 : ffff800011941618
131[ 0.672978] x5 : 0000000000000000 x4 : 0000000000000000
132[ 0.672985] x3 : 00000000ffffffff x2 : ffff8000cd061000
133[ 0.672991] x1 : b33b8256b6b27b00 x0 : 0000000000000000
134[ 0.672998] Call trace:
135[ 0.673006] gdsc_toggle_logic+0xc8/0xd0
136[ 0.673012] gdsc_enable+0xd0/0x210
137[ 0.673018] gdsc_register+0x124/0x330
138[ 0.673024] qcom_cc_really_probe+0x200/0x240
139[ 0.673030] gcc_msm8996_probe+0x60/0x70
140[ 0.673041] platform_drv_probe+0x50/0xa0
141[ 0.673047] really_probe+0xd4/0x308
142[ 0.673052] driver_probe_device+0x54/0xe8
143[ 0.673058] __device_attach_driver+0x80/0xb8
144[ 0.673065] bus_for_each_drv+0x74/0xc0
145[ 0.673072] __device_attach+0xdc/0x138
146[ 0.673078] device_initial_probe+0x10/0x18
147[ 0.673083] bus_probe_device+0x90/0x98
148[ 0.673089] device_add+0x34c/0x608
149[ 0.673100] of_device_add+0x40/0x58
150[ 0.673106] of_platform_device_create_pdata+0xdc/0x130
151[ 0.673112] of_platform_bus_create+0x178/0x3a8
152[ 0.673118] of_platform_bus_create+0x1c0/0x3a8
153[ 0.673124] of_platform_populate+0x50/0xd8
154[ 0.673135] of_platform_default_populate_init+0xac/0xc8
155[ 0.673143] do_one_initcall+0x50/0x190
156[ 0.673155] kernel_init_freeable+0x194/0x22c
157[ 0.673164] kernel_init+0x10/0x100
158[ 0.673170] ret_from_fork+0x10/0x18
159[ 0.673179] ---[ end trace b2189b7727012ef2 ]---
160[ 0.697957] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
161[ 0.697968] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
162[ 0.697974] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
163[ 0.697980] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
164[ 0.722153] cryptd: max_cpu_qlen set to 1000
165[ 0.750062] ACPI: Interpreter disabled.
166[ 0.751350] iommu: Default domain type: Translated
167[ 0.751650] vgaarb: loaded
168[ 0.751940] SCSI subsystem initialized
169[ 0.752507] libata version 3.00 loaded.
170[ 0.752703] usbcore: registered new interface driver usbfs
171[ 0.752740] usbcore: registered new interface driver hub
172[ 0.752818] usbcore: registered new device driver usb
173[ 0.753608] pps_core: LinuxPPS API ver. 1 registered
174[ 0.753615] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
175[ 0.753629] PTP clock support registered
176[ 0.753737] EDAC MC: Ver: 3.0.0
177[ 0.756592] FPGA manager framework
178[ 0.756668] Advanced Linux Sound Architecture Driver Initialized.
179[ 0.759528] clocksource: Switched to clocksource arch_sys_counter
180[ 0.759719] VFS: Disk quotas dquot_6.6.0
181[ 0.759766] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
182[ 0.759934] pnp: PnP ACPI: disabled
183[ 0.766335] thermal_sys: Registered thermal governor 'step_wise'
184[ 0.766339] thermal_sys: Registered thermal governor 'power_allocator'
185[ 0.767747] NET: Registered protocol family 2
186[ 0.768056] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
187[ 0.768081] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
188[ 0.768153] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
189[ 0.768285] TCP: Hash tables configured (established 32768 bind 32768)
190[ 0.768399] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
191[ 0.768427] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
192[ 0.768571] NET: Registered protocol family 1
193[ 0.770300] s1: supplied by regulator-dummy
194[ 0.770552] s2: supplied by regulator-dummy
195[ 0.770741] s3: supplied by regulator-dummy
196[ 0.770777] s3: Bringing 0uV into 1300000-1300000uV
197[ 0.770936] s4: supplied by regulator-dummy
198[ 0.770981] s4: Bringing 0uV into 1800000-1800000uV
199[ 0.771429] s5: supplied by regulator-dummy
200[ 0.771468] s5: Bringing 0uV into 2150000-2150000uV
201[ 0.771638] s6: supplied by regulator-dummy
202[ 0.771841] s7: supplied by regulator-dummy
203[ 0.771880] s7: Bringing 0uV into 800000-800000uV
204[ 0.772050] s8: supplied by regulator-dummy
205[ 0.772248] s9: supplied by regulator-dummy
206[ 0.772597] s10: supplied by regulator-dummy
207[ 0.772824] s11: supplied by regulator-dummy
208[ 0.773020] s12: supplied by regulator-dummy
209[ 0.773171] l1: supplied by s3
210[ 0.773207] l1: Bringing 0uV into 1000000-1000000uV
211[ 0.773343] l2: supplied by s3
212[ 0.773380] l2: Bringing 0uV into 1250000-1250000uV
213[ 0.773516] l3: supplied by s3
214[ 0.773550] l3: Bringing 0uV into 850000-850000uV
215[ 0.773677] l4: supplied by s3
216[ 0.773803] l4: Bringing 0uV into 1225000-1225000uV
217[ 0.773956] l5: supplied by s5
218[ 0.774179] l6: supplied by regulator-dummy
219[ 0.774213] l6: Bringing 0uV into 1200000-1200000uV
220[ 0.774351] l7: supplied by s5
221[ 0.774561] l8: supplied by regulator-dummy
222[ 0.774604] l8: Bringing 0uV into 1800000-1800000uV
223[ 0.774790] l9: supplied by regulator-dummy
224[ 0.774827] l9: Bringing 0uV into 1800000-1800000uV
225[ 0.775015] l10: supplied by regulator-dummy
226[ 0.775049] l10: Bringing 0uV into 1800000-1800000uV
227[ 0.775196] l11: supplied by s3
228[ 0.775240] l11: Bringing 0uV into 1150000-1150000uV
229[ 0.775482] l12: supplied by regulator-dummy
230[ 0.775525] l12: Bringing 0uV into 1800000-1800000uV
231[ 0.775721] l13: supplied by regulator-dummy
232[ 0.775755] l13: Bringing 0uV into 1800000-1800000uV
233[ 0.775905] l14: supplied by s5
234[ 0.775945] l14: Bringing 0uV into 1800000-1800000uV
235[ 0.776090] l15: supplied by s5
236[ 0.776124] l15: Bringing 0uV into 1800000-1800000uV
237[ 0.776321] l16: supplied by regulator-dummy
238[ 0.776360] l16: Bringing 0uV into 2700000-2700000uV
239[ 0.776562] l17: supplied by regulator-dummy
240[ 0.776603] l17: Bringing 0uV into 2500000-2500000uV
241[ 0.776803] l18: supplied by regulator-dummy
242[ 0.776840] l18: Bringing 0uV into 2700000-2700000uV
243[ 0.777056] l19: supplied by regulator-dummy
244[ 0.777090] l19: Bringing 0uV into 3000000-3000000uV
245[ 0.777252] l20: supplied by s5
246[ 0.777299] l20: Bringing 0uV into 2950000-2950000uV
247[ 0.777456] l21: supplied by s5
248[ 0.777489] l21: Bringing 0uV into 2950000-2950000uV
249[ 0.777701] l22: supplied by regulator-dummy
250[ 0.777736] l22: Bringing 0uV into 3300000-3300000uV
251[ 0.777958] RPC: Registered named UNIX socket transport module.
252[ 0.777964] RPC: Registered udp transport module.
253[ 0.777969] RPC: Registered tcp transport module.
254[ 0.777974] RPC: Registered tcp NFSv4.1 backchannel transport module.
255[ 0.777986] PCI: CLS 0 bytes, default 64
256[ 0.777993] l23: supplied by regulator-dummy
257[ 0.778039] l23: Bringing 0uV into 2800000-2800000uV
258[ 0.778364] l24: supplied by regulator-dummy
259[ 0.778409] l24: Bringing 0uV into 3075000-3075000uV
260[ 0.778594] l25: supplied by s3
261[ 0.778633] l25: Bringing 0uV into 1200000-1200000uV
262[ 0.778788] l26: supplied by s3
263[ 0.778982] l27: supplied by s3
264[ 0.779015] l27: Bringing 0uV into 1000000-1000000uV
265[ 0.779184] l28: supplied by s3
266[ 0.779223] l28: Bringing 0uV into 925000-925000uV
267[ 0.779490] l29: supplied by regulator-dummy
268[ 0.779527] l29: Bringing 0uV into 2800000-2800000uV
269[ 0.779773] l30: supplied by regulator-dummy
270[ 0.779811] l30: Bringing 0uV into 1800000-1800000uV
271[ 0.779972] l31: supplied by s3
272[ 0.780226] l32: supplied by regulator-dummy
273[ 0.780267] l32: Bringing 0uV into 1800000-1800000uV
274[ 0.780607] lvs1: supplied by regulator-dummy
275[ 0.780876] lvs2: supplied by regulator-dummy
276[ 0.782955] kvm [1]: HYP mode not available
277[ 0.841071] Initialise system trusted keyrings
278[ 0.841246] workingset: timestamp_bits=44 max_order=20 bucket_order=0
279[ 0.846859] squashfs: version 4.0 (2009/01/31) Phillip Lougher
280[ 0.847637] NFS: Registering the id_resolver key type
281[ 0.847664] Key type id_resolver registered
282[ 0.847669] Key type id_legacy registered
283[ 0.847680] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
284[ 0.847839] 9p: Installing v9fs 9p2000 file system support
285[ 0.869954] Key type asymmetric registered
286[ 0.869964] Asymmetric key parser 'x509' registered
287[ 0.870004] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
288[ 0.870012] io scheduler mq-deadline registered
289[ 0.870018] io scheduler kyber registered
290[ 0.884139] EINJ: ACPI disabled.
291[ 0.915529] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
292[ 0.917745] SuperH (H)SCI(F) driver initialized
293[ 0.918465] msm_serial 7570000.serial: msm_serial: detected port #2
294[ 0.918492] msm_serial 7570000.serial: uartclk = 19200000
295[ 0.918543] 7570000.serial: ttyMSM2 at MMIO 0x7570000 (irq = 8, base_baud = 1200000) is a MSM
296[ 0.918720] serial serial0: tty port ttyMSM2 registered
297[ 0.918887] msm_serial 75b0000.serial: msm_serial: detected port #0
298[ 0.918905] msm_serial 75b0000.serial: uartclk = 7372800
299[ 0.918934] 75b0000.serial: ttyMSM0 at MMIO 0x75b0000 (irq = 11, base_baud = 460800) is a MSM
300[ 0.918953] msm_serial: console setup on port #0
301[ 2.423029] printk: console [ttyMSM0] enabled
302[ 2.428127] msm_serial: driver initialized
303[ 2.433424] arm-smmu da0000.iommu: probing hardware configuration...
304[ 2.436001] arm-smmu da0000.iommu: SMMUv2 with:
305[ 2.442496] arm-smmu da0000.iommu: stage 1 translation
306[ 2.446711] arm-smmu da0000.iommu: address translation ops
307[ 2.451933] arm-smmu da0000.iommu: non-coherent table walk
308[ 2.457476] arm-smmu da0000.iommu: (IDR0.CTTW overridden by FW configuration)
309[ 2.463034] arm-smmu da0000.iommu: stream matching with 4 register groups
310[ 2.470362] arm-smmu da0000.iommu: 2 context banks (0 stage-2 only)
311[ 2.477203] arm-smmu da0000.iommu: Supported page sizes: 0x63315000
312[ 2.483692] arm-smmu da0000.iommu: Stage-1: 32-bit VA -> 36-bit IPA
313[ 2.491143] arm-smmu b40000.iommu: probing hardware configuration...
314[ 2.496375] arm-smmu b40000.iommu: SMMUv2 with:
315[ 2.502728] arm-smmu b40000.iommu: stage 1 translation
316[ 2.506954] arm-smmu b40000.iommu: address translation ops
317[ 2.512162] arm-smmu b40000.iommu: non-coherent table walk
318[ 2.517717] arm-smmu b40000.iommu: (IDR0.CTTW overridden by FW configuration)
319[ 2.523276] arm-smmu b40000.iommu: stream matching with 2 register groups
320[ 2.530590] arm-smmu b40000.iommu: 2 context banks (0 stage-2 only)
321[ 2.537447] arm-smmu b40000.iommu: Supported page sizes: 0x63315000
322[ 2.543935] arm-smmu b40000.iommu: Stage-1: 48-bit VA -> 36-bit IPA
323[ 2.561123] arm-smmu d00000.iommu: probing hardware configuration...
324[ 2.561733] arm-smmu d00000.iommu: SMMUv2 with:
325[ 2.568414] arm-smmu d00000.iommu: stage 1 translation
326[ 2.571339] arm-smmu d00000.iommu: address translation ops
327[ 2.577092] arm-smmu d00000.iommu: non-coherent table walk
328[ 2.582652] arm-smmu d00000.iommu: (IDR0.CTTW overridden by FW configuration)
329[ 2.588380] arm-smmu d00000.iommu: stream matching with 2 register groups
330[ 2.596370] arm-smmu d00000.iommu: 2 context banks (0 stage-2 only)
331[ 2.602775] arm-smmu d00000.iommu: Supported page sizes: 0x63315000
332[ 2.608967] arm-smmu d00000.iommu: Stage-1: 32-bit VA -> 36-bit IPA
333[ 2.642401] arm-smmu 1600000.iommu: probing hardware configuration...
334[ 2.642979] arm-smmu 1600000.iommu: SMMUv2 with:
335[ 2.649311] arm-smmu 1600000.iommu: stage 1 translation
336[ 2.653623] arm-smmu 1600000.iommu: address translation ops
337[ 2.658849] arm-smmu 1600000.iommu: non-coherent table walk
338[ 2.664571] arm-smmu 1600000.iommu: (IDR0.CTTW overridden by FW configuration)
339[ 2.670438] arm-smmu 1600000.iommu: stream matching with 15 register groups
340[ 2.677621] arm-smmu 1600000.iommu: 12 context banks (0 stage-2 only)
341[ 2.685150] arm-smmu 1600000.iommu: Supported page sizes: 0x63315000
342[ 2.690927] arm-smmu 1600000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
343[ 2.736403] arm-smmu d40000.arm,smmu-venus: probing hardware configuration...
344[ 2.736968] arm-smmu d40000.arm,smmu-venus: SMMUv2 with:
345[ 2.744952] arm-smmu d40000.arm,smmu-venus: stage 1 translation
346[ 2.749006] arm-smmu d40000.arm,smmu-venus: address translation ops
347[ 2.754952] arm-smmu d40000.arm,smmu-venus: non-coherent table walk
348[ 2.761262] arm-smmu d40000.arm,smmu-venus: (IDR0.CTTW overridden by FW configuration)
349[ 2.768675] arm-smmu d40000.arm,smmu-venus: stream matching with 42 register groups
350[ 2.776526] arm-smmu d40000.arm,smmu-venus: 7 context banks (0 stage-2 only)
351[ 2.784247] arm-smmu d40000.arm,smmu-venus: Supported page sizes: 0x63315000
352[ 2.790402] arm-smmu d40000.arm,smmu-venus: Stage-1: 32-bit VA -> 36-bit IPA
353[ 3.290439] loop: module loaded
354[ 3.486485] spi_qup 7575000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
355[ 3.518711] spi_qup 75ba000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
356[ 3.568695] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
357[ 3.862542] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver.
358[ 3.921804] libphy: Fixed MDIO Bus: probed
359[ 3.937677] tun: Universal TUN/TAP device driver, 1.6
360[ 3.980339] thunder_xcv, ver 1.0
361[ 3.982685] thunder_bgx, ver 1.0
362[ 3.985428] nicpf, ver 1.0
363[ 4.024278] hclge is initializing
364[ 4.024721] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
365[ 4.026998] hns3: Copyright (c) 2017 Huawei Corporation.
366[ 4.037487] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
367[ 4.040171] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
368[ 4.048244] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
369[ 4.051034] igb: Copyright (c) 2007-2014 Intel Corporation.
370[ 4.060969] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
371[ 4.064153] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
372[ 4.093929] sky2: driver version 1.30
373[ 4.134495] VFIO - User Level meta-driver version: 0.3
374[ 4.191448] dwc3-qcom 76f8800.usb: IRQ hs_phy_irq not found
375[ 4.192924] dwc3-qcom 76f8800.usb: IRQ dp_hs_phy_irq not found
376[ 4.197829] dwc3-qcom 76f8800.usb: IRQ dm_hs_phy_irq not found
377[ 4.204925] dwc3-qcom 76f8800.usb: IRQ ss_phy_irq not found
378[ 4.249596] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
379[ 4.272395] dwc3-qcom 6af8800.usb: IRQ hs_phy_irq not found
380[ 4.272989] dwc3-qcom 6af8800.usb: IRQ dp_hs_phy_irq not found
381[ 4.277929] dwc3-qcom 6af8800.usb: IRQ dm_hs_phy_irq not found
382[ 4.284049] dwc3-qcom 6af8800.usb: IRQ ss_phy_irq not found
383[ 4.326842] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
384[ 4.378752] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
385[ 4.379248] ehci-pci: EHCI PCI platform driver
386[ 4.386680] ehci-platform: EHCI generic platform driver
387[ 4.397503] ehci-orion: EHCI orion driver
388[ 4.404533] ehci-exynos: EHCI EXYNOS driver
389[ 4.410601] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
390[ 4.412107] ohci-pci: OHCI PCI platform driver
391[ 4.417902] ohci-platform: OHCI generic platform driver
392[ 4.428481] ohci-exynos: OHCI EXYNOS driver
393[ 4.456894] usbcore: registered new interface driver usb-storage
394[ 4.636960] i2c /dev entries driver
395[ 4.685139] i2c_qup 75b5000.i2c: using default clock-frequency 100000
396[ 4.685813] i2c_qup 75b5000.i2c:
397 tx channel not available
398[ 4.717387] i2c_qup 75b6000.i2c: using default clock-frequency 100000
399[ 4.718046] i2c_qup 75b6000.i2c:
400 tx channel not available
401[ 4.737784] i2c_qup 7577000.i2c: using default clock-frequency 100000
402[ 4.737848] i2c_qup 7577000.i2c:
403 tx channel not available
404[ 4.752711] sdhci: Secure Digital Host Controller Interface driver
405[ 4.752736] sdhci: Copyright(c) Pierre Ossman
406[ 4.758420] Synopsys Designware Multimedia Card Interface Driver
407[ 4.763547] sdhci-pltfm: SDHCI platform and OF driver helper
408[ 4.769901] sdhci_msm 74a4900.sdhci: Got CD GPIO
409[ 4.810236] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using ADMA 64-bit
410[ 4.814766] ledtrig-cpu: registered to indicate activity on CPUs
411[ 4.819905] usbcore: registered new interface driver usbhid
412[ 4.823197] usbhid: USB HID core driver
413[ 4.830372] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): allocate IRQ 96, hwirq 21
414[ 4.832304] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): found parent hwirq 213
415[ 4.840973] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): alloc_irqs_parent for 96 parent hwirq 213
416[ 4.851455] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): allocate IRQ 97, hwirq 5
417[ 4.858897] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): found parent hwirq 197
418[ 4.867027] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): alloc_irqs_parent for 97 parent hwirq 197
419[ 4.882984] NET: Registered protocol family 17
420[ 4.885489] 9pnet: Installing 9P2000 support
421[ 4.889703] mmc0: new high speed SDHC card at address aaaa
422[ 4.891480] Key type dns_resolver registered
423[ 4.897557] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
424[ 4.899564] registered taskstats version 1
425[ 4.907863] Loading compiled-in X.509 certificates
426[ 4.916596] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
427[ 4.947574] dwc3-qcom 76f8800.usb: IRQ hs_phy_irq not found
428[ 4.947598] dwc3-qcom 76f8800.usb: IRQ dp_hs_phy_irq not found
429[ 4.952044] dwc3-qcom 76f8800.usb: IRQ dm_hs_phy_irq not found
430[ 4.957866] dwc3-qcom 76f8800.usb: IRQ ss_phy_irq not found
431[ 4.964710] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
432[ 4.971595] dwc3-qcom 6af8800.usb: IRQ hs_phy_irq not found
433[ 4.974686] dwc3-qcom 6af8800.usb: IRQ dp_hs_phy_irq not found
434[ 4.980172] dwc3-qcom 6af8800.usb: IRQ dm_hs_phy_irq not found
435[ 4.986069] dwc3-qcom 6af8800.usb: IRQ ss_phy_irq not found
436[ 4.992902] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
437[ 5.003426] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
438[ 5.004596] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
439[ 5.226727] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
440[ 5.267471] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
441[ 5.290196] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): allocate IRQ 98, hwirq 1
442[ 5.290251] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): found parent hwirq 193
443[ 5.297534] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): alloc_irqs_parent for 98 parent hwirq 193
444[ 5.305924] input: gpio_keys as /devices/platform/gpio_keys/input/input0
445[ 5.319816] hctosys: unable to open rtc device (rtc0)
446[ 5.323479] ALSA device list:
447[ 5.324545] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
448[ 5.327230] No soundcards found.
449[ 5.331563] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
450[ 5.363408] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
451[ 5.363492] VFS: Mounted root (ext4 filesystem) on device 179:9.
452[ 5.378047] devtmpfs: mounted
453[ 5.379143] Freeing unused kernel memory: 5056K
454[ 5.380916] Run /lib/systemd/systemd as init process
455[ 5.464787] random: fast init done
456[ 6.041321] systemd[1]: System time before build time, advancing clock.
457[ 6.946075] NET: Registered protocol family 10
458[ 6.947785] Segment Routing with IPv6
459[ 7.070928] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
460[ 7.071390] systemd[1]: Detected architecture arm64.
461[ 7.136658] systemd[1]: Set hostname to <dragon410c>.
462[ 8.129638] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
463[ 8.129687] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
464[ 8.328277] random: systemd: uninitialized urandom read (16 bytes read)
465[ 8.328680] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
466[ 8.355585] random: systemd: uninitialized urandom read (16 bytes read)
467[ 8.355668] systemd[1]: Reached target Remote File Systems.
468[ 8.375617] random: systemd: uninitialized urandom read (16 bytes read)
469[ 8.376471] systemd[1]: Created slice System Slice.
470[ 8.395926] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
471[ 8.416279] systemd[1]: Created slice system-getty.slice.
472[ 9.148198] EXT4-fs (mmcblk0p9): re-mounted. Opts: errors=remount-ro
473[ 9.471977] systemd-journald[203]: Received request to flush runtime journal from PID 1
474[ 9.498391] systemd-journald[203]: File /var/log/journal/24065b0fe49ab91170e8f8915aeff600/system.journal corrupted or uncleanly shut down, renaming and replacing.
475[ 14.306877] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
476[ 14.309655] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
477[ 14.398778] qcom-qmp-phy 34000.phy: Registered Qcom-QMP phy
478[ 14.402472] qcom-pcie 600000.pcie: host bridge /soc/agnoc@0/pcie@600000 ranges:
479[ 14.402518] qcom-pcie 600000.pcie: IO 0x0c200000..0x0c2fffff -> 0x0c200000
480[ 14.402536] qcom-pcie 600000.pcie: MEM 0x0c300000..0x0cffffff -> 0x0c300000
481[ 14.407548] qcom_q6v5_pas adsp-pil: adsp-pil supply cx not found, using dummy regulator
482[ 14.407668] qcom_q6v5_pas adsp-pil: adsp-pil supply px not found, using dummy regulator
483[ 14.428428] qcom-qmp-phy 7410000.phy: Registered Qcom-QMP phy
484[ 14.451472] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
485[ 14.457606] qcom-qusb2-phy 7411000.phy: Registered Qcom-QUSB2 phy
486[ 14.458046] qcom-qusb2-phy 7412000.phy: Registered Qcom-QUSB2 phy
487[ 14.459117] ufshcd-qcom 624000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
488[ 14.459125] ufshcd-qcom 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
489[ 14.464596] ufshcd-qcom 624000.ufshc: Initialization failed
490[ 14.500349] ufshcd-qcom 624000.ufshc: ufshcd_pltfrm_init() failed -517
491[ 14.603484] NET: Registered protocol family 42
492[ 14.606656] remoteproc remoteproc0: adsp-pil is available
493[ 14.869575] remoteproc remoteproc0: Direct firmware load for adsp.mdt failed with error -2
494[ 14.869586] remoteproc remoteproc0: Falling back to sysfs fallback for: adsp.mdt
495[ 15.333043] FAT-fs (mmcblk0p8): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
496[ 15.595402] qcom-pcie 600000.pcie: Phy link never came up
497[ 15.597096] qcom-pcie 600000.pcie: cannot initialize host
498[ 15.599520] qcom-pcie: probe of 600000.pcie failed with error -110
499[ 15.601245] qcom-pcie 608000.pcie: 608000.pcie supply vddpe-3v3 not found, using dummy regulator
500[ 15.601605] qcom-pcie 608000.pcie: host bridge /soc/agnoc@0/pcie@608000 ranges:
501[ 15.601645] qcom-pcie 608000.pcie: IO 0x0d200000..0x0d2fffff -> 0x0d200000
502[ 15.601663] qcom-pcie 608000.pcie: MEM 0x0d300000..0x0dffffff -> 0x0d300000
503[ 15.640867] remoteproc remoteproc0: powering up adsp-pil
504[ 15.640921] remoteproc remoteproc0: Direct firmware load for adsp.mdt failed with error -2
505[ 15.640929] remoteproc remoteproc0: Falling back to sysfs fallback for: adsp.mdt
506[ 15.644415] remoteproc remoteproc0: request_firmware failed: -11
507[ 16.707393] qcom-pcie 608000.pcie: Phy link never came up
508[ 16.709042] qcom-pcie 608000.pcie: cannot initialize host
509[ 16.711264] qcom-pcie: probe of 608000.pcie failed with error -110
510[ 16.713076] qcom-pcie 610000.pcie: 610000.pcie supply vddpe-3v3 not found, using dummy regulator
511[ 16.713324] qcom-pcie 610000.pcie: host bridge /soc/agnoc@0/pcie@610000 ranges:
512[ 16.713364] qcom-pcie 610000.pcie: IO 0x0e200000..0x0e2fffff -> 0x0e200000
513[ 16.713383] qcom-pcie 610000.pcie: MEM 0x0e300000..0x0fffffff -> 0x0e300000
514[ 17.819475] qcom-pcie 610000.pcie: Phy link never came up
515[ 17.821133] qcom-pcie 610000.pcie: cannot initialize host
516[ 17.822707] qcom-pcie: probe of 610000.pcie failed with error -110
517[ 17.824290] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
518[ 17.826493] phy phy-7412000.phy.5: QUSB2PHY pll lock failed: status reg = 0
519[ 17.831085] phy phy-7412000.phy.5: phy init failed --> -16
520[ 17.837814] dwc3 7600000.dwc3: failed to initialize core: -16
521[ 17.843683] dwc3: probe of 7600000.dwc3 failed with error -16
522[ 17.844979] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
523[ 17.850265] phy phy-7411000.phy.4: QUSB2PHY pll lock failed: status reg = 0
524[ 17.854961] phy phy-7411000.phy.4: phy init failed --> -16
525[ 17.861642] dwc3 6a00000.dwc3: failed to initialize core: -16
526[ 17.868384] dwc3: probe of 6a00000.dwc3 failed with error -16
527[ 17.888097] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
528[ 17.890881] ufshcd-qcom 624000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
529[ 17.890893] ufshcd-qcom 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
530[ 17.892243] ufshcd-qcom 624000.ufshc: Initialization failed
531[ 17.916607] adreno b00000.gpu: Adding to iommu group 0
532[ 17.920431] ufshcd-qcom 624000.ufshc: ufshcd_pltfrm_init() failed -517
533[ 17.921331] msm_mdp 901000.mdp: Adding to iommu group 1
534[ 17.921995] msm_mdp 901000.mdp: No interconnect support may cause display underflows!
535[ 17.926678] msm 900000.mdss: 900000.mdss supply vdd not found, using dummy regulator
536[ 17.927791] msm_mdp 901000.mdp: [drm:mdp5_bind [msm]] MDP5 version v1.7
537[ 17.927926] msm 900000.mdss: bound 901000.mdp (ops mdp5_ops [msm])
538[ 17.929613] msm 900000.mdss: bound 9a0000.hdmi-tx (ops msm_hdmi_ops [msm])
539[ 17.930340] adreno b00000.gpu: b00000.gpu supply vdd not found, using dummy regulator
540[ 17.930439] adreno b00000.gpu: b00000.gpu supply vddcx not found, using dummy regulator
541[ 17.930723] msm 900000.mdss: [drm:msm_gpu_init [msm]] A530: using IOMMU
542[ 17.930942] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
543[ 17.932389] ufshcd-qcom 624000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
544[ 17.932399] ufshcd-qcom 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
545[ 17.932822] ufshcd-qcom 624000.ufshc: Initialization failed
546[ 17.967402] ufshcd-qcom 624000.ufshc: ufshcd_pltfrm_init() failed -517
547[ 17.973293] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
548[ 17.974871] ufshcd-qcom 624000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
549[ 17.974879] ufshcd-qcom 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
550[ 17.975236] ufshcd-qcom 624000.ufshc: Initialization failed
551[ 18.022952] ufshcd-qcom 624000.ufshc: ufshcd_pltfrm_init() failed -517
552[ 18.060886] msm 900000.mdss: bound b00000.gpu (ops a3xx_ops [msm])
553[ 18.201683] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
554[ 18.201690] [drm] Driver supports precise vblank timestamp query.
555[ 18.205079] [drm] Initialized msm 1.5.0 20130625 for 900000.mdss on minor 0
556[ 18.251717] msm 900000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a530_pm4.fw from new location
557[ 18.253183] msm 900000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a530_pfp.fw from new location
558[ 18.265401] msm 900000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a530v3_gpmu.fw2 from new location
559[ 18.266340] ------------[ cut here ]------------
560[ 18.266344] gpu_gx_gfx3d_clk status stuck at 'off'
561[ 18.266377] WARNING: CPU: 1 PID: 251 at drivers/clk/qcom/clk-branch.c:91 clk_branch_toggle+0x198/0x1b8
562[ 18.266380] Modules linked in: msm(+) drm_kms_helper crct10dif_ce drm qrtr phy_qcom_qusb2 ufs_qcom qcom_q6v5_pas phy_qcom_qmp qcom_sysmon qmi_helpers qcom_q6v5 glink_ssr mdt_loader qcom_common qcom_glink_smem ip_tables x_tables ipv6 nf_defrag_ipv6
563[ 18.266418] CPU: 1 PID: 251 Comm: systemd-udevd Tainted: G W 5.4.0-00009-gef2dd1cc3ca4 #1
564[ 18.266421] Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
565[ 18.266427] pstate: 60000085 (nZCv daIf -PAN -UAO)
566[ 18.266432] pc : clk_branch_toggle+0x198/0x1b8
567[ 18.266437] lr : clk_branch_toggle+0x198/0x1b8
568[ 18.266441] sp : ffff800011e8b340
569[ 18.266444] x29: ffff800011e8b340 x28: 0000000000000000
570[ 18.266450] x27: ffff0000d9bf3128 x26: ffff0000d912ee00
571[ 18.266455] x25: ffff80001184bfb0 x24: 0000000000000000
572[ 18.266460] x23: ffff800011102e68 x22: 0000000000000001
573[ 18.266465] x21: ffff8000105c5c70 x20: ffff0000d912ee00
574[ 18.266471] x19: 0000000000000000 x18: 0000000000000000
575[ 18.266476] x17: 0000000000000000 x16: 0000000000000000
576[ 18.266481] x15: ffff800011782000 x14: ffff800011941f72
577[ 18.266486] x13: 0000000000000000 x12: ffff800011941000
578[ 18.266491] x11: ffff800011782000 x10: ffff8000119415c0
579[ 18.266496] x9 : 00000000fffffffe x8 : 7461206b63757473
580[ 18.266501] x7 : 2073757461747320 x6 : ffff80001194161e
581[ 18.266506] x5 : 0000000000000000 x4 : 0000000000000000
582[ 18.266511] x3 : 00000000ffffffff x2 : ffff8000cd061000
583[ 18.266516] x1 : e6434ea53142c000 x0 : 0000000000000000
584[ 18.266521] Call trace:
585[ 18.266528] clk_branch_toggle+0x198/0x1b8
586[ 18.266533] clk_branch2_enable+0x18/0x20
587[ 18.266539] clk_core_enable+0x64/0xb0
588[ 18.266543] clk_core_enable_lock+0x20/0x40
589[ 18.266548] clk_enable+0x14/0x28
590[ 18.266552] clk_bulk_enable+0x38/0xb0
591[ 18.266615] msm_gpu_pm_resume+0xa0/0x178 [msm]
592[ 18.266668] a5xx_pm_resume+0x14/0x148 [msm]
593[ 18.266722] adreno_resume+0x18/0x20 [msm]
594[ 18.266730] pm_generic_runtime_resume+0x28/0x40
595[ 18.266738] __genpd_runtime_resume+0x2c/0xa0
596[ 18.266742] genpd_runtime_resume+0x88/0x208
597[ 18.266747] __rpm_callback+0xd4/0x140
598[ 18.266751] rpm_callback+0x20/0x80
599[ 18.266755] rpm_resume+0x39c/0x580
600[ 18.266760] __pm_runtime_resume+0x38/0x80
601[ 18.266811] adreno_load_gpu+0x50/0x188 [msm]
602[ 18.266867] msm_open+0x94/0xa8 [msm]
603[ 18.266924] drm_file_alloc+0x11c/0x1e0 [drm]
604[ 18.266965] drm_client_init+0xac/0x148 [drm]
605[ 18.266991] drm_fb_helper_init.part.0+0x40/0x48 [drm_kms_helper]
606[ 18.267010] drm_fb_helper_init+0x18/0x30 [drm_kms_helper]
607[ 18.267067] msm_fbdev_init+0x5c/0xe8 [msm]
608[ 18.267122] msm_drm_bind+0x5a0/0x618 [msm]
609[ 18.267133] try_to_bring_up_master+0x164/0x1c0
610[ 18.267139] component_master_add_with_match+0xb0/0xf8
611[ 18.267192] msm_pdev_probe+0x268/0x308 [msm]
612[ 18.267201] platform_drv_probe+0x50/0xa0
613[ 18.267206] really_probe+0xd4/0x308
614[ 18.267211] driver_probe_device+0x54/0xe8
615[ 18.267217] device_driver_attach+0x6c/0x78
616[ 18.267222] __driver_attach+0x54/0xd0
617[ 18.267227] bus_for_each_dev+0x6c/0xc0
618[ 18.267232] driver_attach+0x20/0x28
619[ 18.267236] bus_add_driver+0x140/0x1e8
620[ 18.267241] driver_register+0x60/0x110
621[ 18.267246] __platform_driver_register+0x44/0x50
622[ 18.267298] msm_drm_register+0x54/0x68 [msm]
623[ 18.267306] do_one_initcall+0x50/0x190
624[ 18.267316] do_init_module+0x50/0x208
625[ 18.267320] load_module+0x1d1c/0x2298
626[ 18.267324] __do_sys_finit_module+0xd0/0xe8
627[ 18.267328] __arm64_sys_finit_module+0x1c/0x28
628[ 18.267336] el0_svc_common.constprop.0+0x68/0x160
629[ 18.267340] el0_svc_handler+0x20/0x80
630[ 18.267345] el0_svc+0x8/0xc
631[ 18.267350] ---[ end trace b2189b7727012ef4 ]---
632[ 18.267438] Failed to enable clk 'core': -16
633[ 18.267594] msm 900000.mdss: [drm:adreno_load_gpu [msm]] *ERROR* Couldn't power up the GPU: -16
634[ 18.270825] [drm] Cannot find any crtc or sizes
635[ 18.274362] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
636[ 18.285029] ufshcd-qcom 624000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
637[ 18.285044] ufshcd-qcom 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
638[ 18.285612] ufshcd-qcom 624000.ufshc: Initialization failed
639[ 18.328308] ufshcd-qcom 624000.ufshc: ufshcd_pltfrm_init() failed -517
640[ 18.365409] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
641[ 18.367220] ufshcd-qcom 624000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
642[ 18.367230] ufshcd-qcom 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
643[ 18.367746] ufshcd-qcom 624000.ufshc: Initialization failed
644[ 18.401329] ufshcd-qcom 624000.ufshc: ufshcd_pltfrm_init() failed -517
645[ 19.279529] [drm] Cannot find any crtc or sizes
646[ 36.207530] wlan-en-regulator: disabling