· 6 years ago · Dec 05, 2019, 12:50 PM
1[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x511f2112]
2[ 0.000000] Linux version 5.4.0-00010-g3431d718bb15 (ppisati@kathleen) (gcc version 9.2.1 20191130 (Ubuntu 9.2.1-21ubuntu1)) #1 SMP PREEMPT Thu Dec 5 11:36:31 UTC 2019
3[ 0.000000] Machine model: Qualcomm Technologies, Inc. DB820c
4[ 0.000000] efi: Getting EFI parameters from FDT:
5[ 0.000000] efi: UEFI not found.
6[ 0.000000] OF: reserved mem: OVERLAP DETECTED!
7 gpu@8f200000 (0x0000000090b00000--0x0000000091500000) overlaps with slpi@90b00000 (0x0000000090b00000--0x0000000091500000)
8[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090b00000, size 10 MiB
9[ 0.000000] OF: reserved mem: initialized node gpu@8f200000, compatible id shared-dma-pool
10[ 0.000000] cma: Reserved 32 MiB at 0x00000000de000000
11[ 0.000000] NUMA: No NUMA configuration found
12[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000015ea4efff]
13[ 0.000000] NUMA: NODE_DATA [mem 0x15e460800-0x15e461fff]
14[ 0.000000] Zone ranges:
15[ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff]
16[ 0.000000] Normal [mem 0x0000000100000000-0x000000015ea4efff]
17[ 0.000000] Movable zone start for each node
18[ 0.000000] Early memory node ranges
19[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000857fffff]
20[ 0.000000] node 0: [mem 0x0000000091700000-0x00000000a1dfffff]
21[ 0.000000] node 0: [mem 0x00000000a2000000-0x00000000dfffffff]
22[ 0.000000] node 0: [mem 0x0000000100000000-0x000000015ea4efff]
23[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000015ea4efff]
24[ 0.000000] On node 0 totalpages: 731471
25[ 0.000000] DMA32 zone: 5372 pages used for memmap
26[ 0.000000] DMA32 zone: 0 pages reserved
27[ 0.000000] DMA32 zone: 343808 pages, LIFO batch:63
28[ 0.000000] Normal zone: 6058 pages used for memmap
29[ 0.000000] Normal zone: 387663 pages, LIFO batch:63
30[ 0.000000] psci: probing for conduit method from DT.
31[ 0.000000] psci: PSCIv1.0 detected in firmware.
32[ 0.000000] psci: Using standard PSCI v0.2 function IDs
33[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
34[ 0.000000] psci: SMC Calling Convention v1.0
35[ 0.000000] psci: OSI mode supported.
36[ 0.000000] percpu: Embedded 22 pages/cpu s52952 r8192 d28968 u90112
37[ 0.000000] pcpu-alloc: s52952 r8192 d28968 u90112 alloc=22*4096
38[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
39[ 0.000000] Detected PIPT I-cache on CPU0
40[ 0.000000] CPU features: detected: GIC system register CPU interface
41[ 0.000000] CPU features: detected: Qualcomm erratum 1009, ARM erratum 1286807
42[ 0.000000] CPU features: detected: Qualcomm Technologies Falkor/Kryo erratum 1003
43[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
44[ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
45[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 720041
46[ 0.000000] Policy zone: Normal
47[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 root=/dev/mmcblk0p9 net.ifnames=0 init=/lib/systemd/systemd rw rootwait panic=-1
48[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
49[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
50[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
51[ 0.000000] software IO TLB: mapped [mem 0xda000000-0xde000000] (64MB)
52[ 0.000000] Memory: 2723272K/2925884K available (11900K kernel code, 1860K rwdata, 6428K rodata, 5056K init, 450K bss, 169844K reserved, 32768K cma-reserved)
53[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
54[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
55[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
56[ 0.000000] Tasks RCU enabled.
57[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
58[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
59[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
60[ 0.000000] GIC: enabling workaround for GICv3: Qualcomm MSM8996 broken firmware
61[ 0.000000] GICv3: 608 SPIs implemented
62[ 0.000000] GICv3: 0 Extended SPIs implemented
63[ 0.000000] GICv3: Distributor has no Range Selector support
64[ 0.000000] GICv3: 16 PPIs implemented
65[ 0.000000] GICv3: VLPI support, no direct LPI support
66[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000
67[ 0.000000] ITS: No ITS available, not enabling LPIs
68[ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x44c with crng_init=0
69[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
70[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
71[ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
72[ 0.000329] Console: colour dummy device 80x25
73[ 0.000405] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
74[ 0.000414] pid_max: default: 32768 minimum: 301
75[ 0.000485] LSM: Security Framework initializing
76[ 0.000534] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
77[ 0.000546] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
78[ 0.023468] ASID allocator initialised with 32768 entries
79[ 0.031462] rcu: Hierarchical SRCU implementation.
80[ 0.041589] EFI services will not be available.
81[ 0.047521] smp: Bringing up secondary CPUs ...
82[ 0.080073] Detected PIPT I-cache on CPU1
83[ 0.080101] GICv3: CPU1: found redistributor 1 region 0:0x0000000009c40000
84[ 0.080138] CPU1: Booted secondary processor 0x0000000001 [0x511f2112]
85[ 0.114908] Detected PIPT I-cache on CPU2
86[ 0.115696] GICv3: CPU2: found redistributor 100 region 0:0x0000000009c80000
87[ 0.116573] CPU2: Booted secondary processor 0x0000000100 [0x511f2052]
88[ 0.154648] Detected PIPT I-cache on CPU3
89[ 0.155405] GICv3: CPU3: found redistributor 101 region 0:0x0000000009cc0000
90[ 0.156265] CPU3: Booted secondary processor 0x0000000101 [0x511f2052]
91[ 0.159892] smp: Brought up 1 node, 4 CPUs
92[ 0.159925] SMP: Total of 4 processors activated.
93[ 0.159941] CPU features: detected: 32-bit EL0 Support
94[ 0.159949] CPU features: detected: CRC32 instructions
95[ 0.643551] CPU: All CPU(s) started at EL1
96[ 0.644020] alternatives: patching kernel code
97[ 0.646265] devtmpfs: initialized
98[ 0.655762] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
99[ 0.655787] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
100[ 0.656371] pinctrl core: initialized pinctrl subsystem
101[ 0.657946] DMI not present or invalid.
102[ 0.658392] NET: Registered protocol family 16
103[ 0.660726] DMA: preallocated 256 KiB pool for atomic allocations
104[ 0.660742] audit: initializing netlink subsys (disabled)
105[ 0.662644] audit: type=2000 audit(0.260:1): state=initialized audit_enabled=0 res=1
106[ 0.665256] cpuidle: using governor menu
107[ 0.665511] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers.
108[ 0.668570] Serial: AMBA PL011 UART driver
109[ 0.697639] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
110[ 0.697651] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
111[ 0.697657] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
112[ 0.697663] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
113[ 0.713395] cryptd: max_cpu_qlen set to 1000
114[ 0.735179] ACPI: Interpreter disabled.
115[ 0.737572] iommu: Default domain type: Translated
116[ 0.737869] vgaarb: loaded
117[ 0.738148] SCSI subsystem initialized
118[ 0.738372] libata version 3.00 loaded.
119[ 0.738573] usbcore: registered new interface driver usbfs
120[ 0.738605] usbcore: registered new interface driver hub
121[ 0.739067] usbcore: registered new device driver usb
122[ 0.739714] pps_core: LinuxPPS API ver. 1 registered
123[ 0.739722] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
124[ 0.739735] PTP clock support registered
125[ 0.739844] EDAC MC: Ver: 3.0.0
126[ 0.742869] FPGA manager framework
127[ 0.742945] Advanced Linux Sound Architecture Driver Initialized.
128[ 0.744332] clocksource: Switched to clocksource arch_sys_counter
129[ 0.744622] VFS: Disk quotas dquot_6.6.0
130[ 0.744680] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
131[ 0.744843] pnp: PnP ACPI: disabled
132[ 0.752581] thermal_sys: Registered thermal governor 'step_wise'
133[ 0.752585] thermal_sys: Registered thermal governor 'power_allocator'
134[ 0.755914] s1: supplied by regulator-dummy
135[ 0.756228] s2: supplied by regulator-dummy
136[ 0.756432] s3: supplied by regulator-dummy
137[ 0.756469] s3: Bringing 0uV into 1300000-1300000uV
138[ 0.756646] s4: supplied by regulator-dummy
139[ 0.756690] s4: Bringing 0uV into 1800000-1800000uV
140[ 0.756967] s5: supplied by regulator-dummy
141[ 0.757007] s5: Bringing 0uV into 2150000-2150000uV
142[ 0.757178] s6: supplied by regulator-dummy
143[ 0.757212] NET: Registered protocol family 2
144[ 0.757404] s7: supplied by regulator-dummy
145[ 0.757458] s7: Bringing 0uV into 800000-800000uV
146[ 0.757538] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
147[ 0.757561] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
148[ 0.757631] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
149[ 0.757705] s8: supplied by regulator-dummy
150[ 0.757759] TCP: Hash tables configured (established 32768 bind 32768)
151[ 0.757864] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
152[ 0.757890] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
153[ 0.758029] NET: Registered protocol family 1
154[ 0.758056] s9: supplied by regulator-dummy
155[ 0.758445] s10: supplied by regulator-dummy
156[ 0.758651] s11: supplied by regulator-dummy
157[ 0.758852] s12: supplied by regulator-dummy
158[ 0.759008] l1: supplied by s3
159[ 0.759043] l1: Bringing 0uV into 1000000-1000000uV
160[ 0.759358] l2: supplied by s3
161[ 0.759396] l2: Bringing 0uV into 1250000-1250000uV
162[ 0.759525] l3: supplied by s3
163[ 0.759560] l3: Bringing 0uV into 850000-850000uV
164[ 0.759688] l4: supplied by s3
165[ 0.759721] l4: Bringing 0uV into 1225000-1225000uV
166[ 0.759856] l5: supplied by s5
167[ 0.760085] l6: supplied by regulator-dummy
168[ 0.760119] l6: Bringing 0uV into 1200000-1200000uV
169[ 0.760298] l7: supplied by s5
170[ 0.760641] l8: supplied by regulator-dummy
171[ 0.760678] l8: Bringing 0uV into 1800000-1800000uV
172[ 0.760870] l9: supplied by regulator-dummy
173[ 0.760909] l9: Bringing 0uV into 1800000-1800000uV
174[ 0.761105] l10: supplied by regulator-dummy
175[ 0.761140] l10: Bringing 0uV into 1800000-1800000uV
176[ 0.761288] l11: supplied by s3
177[ 0.761335] l11: Bringing 0uV into 1150000-1150000uV
178[ 0.761528] l12: supplied by regulator-dummy
179[ 0.761562] l12: Bringing 0uV into 1800000-1800000uV
180[ 0.761754] l13: supplied by regulator-dummy
181[ 0.761787] l13: Bringing 0uV into 1800000-1800000uV
182[ 0.761948] l14: supplied by s5
183[ 0.761991] l14: Bringing 0uV into 1800000-1800000uV
184[ 0.762139] l15: supplied by s5
185[ 0.762172] l15: Bringing 0uV into 1800000-1800000uV
186[ 0.762367] l16: supplied by regulator-dummy
187[ 0.762406] l16: Bringing 0uV into 2700000-2700000uV
188[ 0.762610] l17: supplied by regulator-dummy
189[ 0.762654] l17: Bringing 0uV into 2500000-2500000uV
190[ 0.762858] l18: supplied by regulator-dummy
191[ 0.762890] l18: Bringing 0uV into 2700000-2700000uV
192[ 0.763092] l19: supplied by regulator-dummy
193[ 0.763127] l19: Bringing 0uV into 3000000-3000000uV
194[ 0.763277] l20: supplied by s5
195[ 0.763319] l20: Bringing 0uV into 2950000-2950000uV
196[ 0.763472] l21: supplied by s5
197[ 0.763509] l21: Bringing 0uV into 2950000-2950000uV
198[ 0.763736] l22: supplied by regulator-dummy
199[ 0.763770] l22: Bringing 0uV into 3300000-3300000uV
200[ 0.763984] l23: supplied by regulator-dummy
201[ 0.764027] l23: Bringing 0uV into 2800000-2800000uV
202[ 0.764379] l24: supplied by regulator-dummy
203[ 0.764418] l24: Bringing 0uV into 3075000-3075000uV
204[ 0.764586] RPC: Registered named UNIX socket transport module.
205[ 0.764593] RPC: Registered udp transport module.
206[ 0.764598] RPC: Registered tcp transport module.
207[ 0.764603] RPC: Registered tcp NFSv4.1 backchannel transport module.
208[ 0.764615] PCI: CLS 0 bytes, default 64
209[ 0.764626] l25: supplied by s3
210[ 0.764664] l25: Bringing 0uV into 1200000-1200000uV
211[ 0.764908] l26: supplied by s3
212[ 0.765143] l27: supplied by s3
213[ 0.765179] l27: Bringing 0uV into 1000000-1000000uV
214[ 0.765344] l28: supplied by s3
215[ 0.765377] l28: Bringing 0uV into 925000-925000uV
216[ 0.765608] l29: supplied by regulator-dummy
217[ 0.765643] l29: Bringing 0uV into 2800000-2800000uV
218[ 0.765893] l30: supplied by regulator-dummy
219[ 0.765928] l30: Bringing 0uV into 1800000-1800000uV
220[ 0.766099] l31: supplied by s3
221[ 0.766443] l32: supplied by regulator-dummy
222[ 0.766477] l32: Bringing 0uV into 1800000-1800000uV
223[ 0.766802] lvs1: supplied by regulator-dummy
224[ 0.767055] lvs2: supplied by regulator-dummy
225[ 0.769789] kvm [1]: HYP mode not available
226[ 0.830710] Initialise system trusted keyrings
227[ 0.830962] workingset: timestamp_bits=44 max_order=20 bucket_order=0
228[ 0.836657] squashfs: version 4.0 (2009/01/31) Phillip Lougher
229[ 0.837338] NFS: Registering the id_resolver key type
230[ 0.837363] Key type id_resolver registered
231[ 0.837368] Key type id_legacy registered
232[ 0.837382] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
233[ 0.837547] 9p: Installing v9fs 9p2000 file system support
234[ 0.859057] Key type asymmetric registered
235[ 0.859067] Asymmetric key parser 'x509' registered
236[ 0.859112] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
237[ 0.859119] io scheduler mq-deadline registered
238[ 0.859125] io scheduler kyber registered
239[ 0.873814] EINJ: ACPI disabled.
240[ 0.904452] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
241[ 0.906673] SuperH (H)SCI(F) driver initialized
242[ 0.907391] msm_serial 7570000.serial: msm_serial: detected port #2
243[ 0.907417] msm_serial 7570000.serial: uartclk = 19200000
244[ 0.907473] 7570000.serial: ttyMSM2 at MMIO 0x7570000 (irq = 8, base_baud = 1200000) is a MSM
245[ 0.907637] serial serial0: tty port ttyMSM2 registered
246[ 0.907806] msm_serial 75b0000.serial: msm_serial: detected port #0
247[ 0.907824] msm_serial 75b0000.serial: uartclk = 7372800
248[ 0.907857] 75b0000.serial: ttyMSM0 at MMIO 0x75b0000 (irq = 11, base_baud = 460800) is a MSM
249[ 0.907876] msm_serial: console setup on port #0
250[ 2.177939] printk: console [ttyMSM0] enabled
251[ 2.183023] msm_serial: driver initialized
252[ 2.188354] arm-smmu da0000.iommu: probing hardware configuration...
253[ 2.190837] arm-smmu da0000.iommu: SMMUv2 with:
254[ 2.197397] arm-smmu da0000.iommu: stage 1 translation
255[ 2.201609] arm-smmu da0000.iommu: address translation ops
256[ 2.206817] arm-smmu da0000.iommu: non-coherent table walk
257[ 2.212373] arm-smmu da0000.iommu: (IDR0.CTTW overridden by FW configuration)
258[ 2.217936] arm-smmu da0000.iommu: stream matching with 4 register groups
259[ 2.225258] arm-smmu da0000.iommu: 2 context banks (0 stage-2 only)
260[ 2.232101] arm-smmu da0000.iommu: Supported page sizes: 0x63315000
261[ 2.238589] arm-smmu da0000.iommu: Stage-1: 32-bit VA -> 36-bit IPA
262[ 2.246033] arm-smmu b40000.iommu: probing hardware configuration...
263[ 2.251271] arm-smmu b40000.iommu: SMMUv2 with:
264[ 2.257623] arm-smmu b40000.iommu: stage 1 translation
265[ 2.261852] arm-smmu b40000.iommu: address translation ops
266[ 2.267059] arm-smmu b40000.iommu: non-coherent table walk
267[ 2.272614] arm-smmu b40000.iommu: (IDR0.CTTW overridden by FW configuration)
268[ 2.278183] arm-smmu b40000.iommu: stream matching with 2 register groups
269[ 2.285487] arm-smmu b40000.iommu: 2 context banks (0 stage-2 only)
270[ 2.292344] arm-smmu b40000.iommu: Supported page sizes: 0x63315000
271[ 2.298832] arm-smmu b40000.iommu: Stage-1: 48-bit VA -> 36-bit IPA
272[ 2.306401] arm-smmu d00000.iommu: probing hardware configuration...
273[ 2.311512] arm-smmu d00000.iommu: SMMUv2 with:
274[ 2.317866] arm-smmu d00000.iommu: stage 1 translation
275[ 2.322093] arm-smmu d00000.iommu: address translation ops
276[ 2.327302] arm-smmu d00000.iommu: non-coherent table walk
277[ 2.332858] arm-smmu d00000.iommu: (IDR0.CTTW overridden by FW configuration)
278[ 2.338415] arm-smmu d00000.iommu: stream matching with 2 register groups
279[ 2.345728] arm-smmu d00000.iommu: 2 context banks (0 stage-2 only)
280[ 2.352594] arm-smmu d00000.iommu: Supported page sizes: 0x63315000
281[ 2.359076] arm-smmu d00000.iommu: Stage-1: 32-bit VA -> 36-bit IPA
282[ 2.366250] arm-smmu 1600000.iommu: probing hardware configuration...
283[ 2.371758] arm-smmu 1600000.iommu: SMMUv2 with:
284[ 2.378112] arm-smmu 1600000.iommu: stage 1 translation
285[ 2.382772] arm-smmu 1600000.iommu: address translation ops
286[ 2.388067] arm-smmu 1600000.iommu: non-coherent table walk
287[ 2.393708] arm-smmu 1600000.iommu: (IDR0.CTTW overridden by FW configuration)
288[ 2.399354] arm-smmu 1600000.iommu: stream matching with 15 register groups
289[ 2.406409] arm-smmu 1600000.iommu: 12 context banks (0 stage-2 only)
290[ 2.413699] arm-smmu 1600000.iommu: Supported page sizes: 0x63315000
291[ 2.420013] arm-smmu 1600000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
292[ 2.429280] arm-smmu d40000.arm,smmu-venus: probing hardware configuration...
293[ 2.432952] arm-smmu d40000.arm,smmu-venus: SMMUv2 with:
294[ 2.440105] arm-smmu d40000.arm,smmu-venus: stage 1 translation
295[ 2.445445] arm-smmu d40000.arm,smmu-venus: address translation ops
296[ 2.451437] arm-smmu d40000.arm,smmu-venus: non-coherent table walk
297[ 2.457772] arm-smmu d40000.arm,smmu-venus: (IDR0.CTTW overridden by FW configuration)
298[ 2.464111] arm-smmu d40000.arm,smmu-venus: stream matching with 42 register groups
299[ 2.471869] arm-smmu d40000.arm,smmu-venus: 7 context banks (0 stage-2 only)
300[ 2.479844] arm-smmu d40000.arm,smmu-venus: Supported page sizes: 0x63315000
301[ 2.486860] arm-smmu d40000.arm,smmu-venus: Stage-1: 32-bit VA -> 36-bit IPA
302[ 2.522615] loop: module loaded
303[ 2.526542] spi_qup 7575000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
304[ 2.527753] spi_qup 75ba000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
305[ 2.533826] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
306[ 2.548538] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver.
307[ 2.549967] libphy: Fixed MDIO Bus: probed
308[ 2.560803] tun: Universal TUN/TAP device driver, 1.6
309[ 2.565557] thunder_xcv, ver 1.0
310[ 2.569803] thunder_bgx, ver 1.0
311[ 2.573086] nicpf, ver 1.0
312[ 2.576976] hclge is initializing
313[ 2.578770] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
314[ 2.582175] hns3: Copyright (c) 2017 Huawei Corporation.
315[ 2.589352] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
316[ 2.594753] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
317[ 2.600423] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
318[ 2.606212] igb: Copyright (c) 2007-2014 Intel Corporation.
319[ 2.613185] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
320[ 2.618714] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
321[ 2.627149] sky2: driver version 1.30
322[ 2.633308] VFIO - User Level meta-driver version: 0.3
323[ 2.639346] dwc3-qcom 76f8800.usb: IRQ hs_phy_irq not found
324[ 2.641293] dwc3-qcom 76f8800.usb: IRQ dp_hs_phy_irq not found
325[ 2.646751] dwc3-qcom 76f8800.usb: IRQ dm_hs_phy_irq not found
326[ 2.652653] dwc3-qcom 76f8800.usb: IRQ ss_phy_irq not found
327[ 2.659500] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
328[ 2.665605] dwc3-qcom 6af8800.usb: IRQ hs_phy_irq not found
329[ 2.669503] dwc3-qcom 6af8800.usb: IRQ dp_hs_phy_irq not found
330[ 2.674962] dwc3-qcom 6af8800.usb: IRQ dm_hs_phy_irq not found
331[ 2.680874] dwc3-qcom 6af8800.usb: IRQ ss_phy_irq not found
332[ 2.687693] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
333[ 2.693409] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
334[ 2.697754] ehci-pci: EHCI PCI platform driver
335[ 2.704244] ehci-platform: EHCI generic platform driver
336[ 2.708854] ehci-orion: EHCI orion driver
337[ 2.713948] ehci-exynos: EHCI EXYNOS driver
338[ 2.718083] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
339[ 2.721953] ohci-pci: OHCI PCI platform driver
340[ 2.728213] ohci-platform: OHCI generic platform driver
341[ 2.732797] ohci-exynos: OHCI EXYNOS driver
342[ 2.738356] usbcore: registered new interface driver usb-storage
343[ 2.745609] i2c /dev entries driver
344[ 2.749142] i2c_qup 75b5000.i2c: using default clock-frequency 100000
345[ 2.751349] i2c_qup 75b5000.i2c:
346 tx channel not available
347[ 2.758558] i2c_qup 75b6000.i2c: using default clock-frequency 100000
348[ 2.764738] i2c_qup 75b6000.i2c:
349 tx channel not available
350[ 2.771839] i2c_qup 7577000.i2c: using default clock-frequency 100000
351[ 2.778113] i2c_qup 7577000.i2c:
352 tx channel not available
353[ 2.792485] sdhci: Secure Digital Host Controller Interface driver
354[ 2.792505] sdhci: Copyright(c) Pierre Ossman
355[ 2.798354] Synopsys Designware Multimedia Card Interface Driver
356[ 2.803420] sdhci-pltfm: SDHCI platform and OF driver helper
357[ 2.809786] sdhci_msm 74a4900.sdhci: Got CD GPIO
358[ 2.849478] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using ADMA 64-bit
359[ 2.854877] ledtrig-cpu: registered to indicate activity on CPUs
360[ 2.858435] usbcore: registered new interface driver usbhid
361[ 2.862419] usbhid: USB HID core driver
362[ 2.869905] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): allocate IRQ 96, hwirq 21
363[ 2.871486] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): found parent hwirq 213
364[ 2.880264] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): alloc_irqs_parent for 96 parent hwirq 213
365[ 2.890682] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): allocate IRQ 97, hwirq 5
366[ 2.898179] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): found parent hwirq 197
367[ 2.906264] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): alloc_irqs_parent for 97 parent hwirq 197
368[ 2.921924] NET: Registered protocol family 17
369[ 2.924656] 9pnet: Installing 9P2000 support
370[ 2.928919] Key type dns_resolver registered
371[ 2.933157] mmc0: new high speed SDHC card at address aaaa
372[ 2.942029] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
373[ 2.949080] registered taskstats version 1
374[ 2.949565] Loading compiled-in X.509 certificates
375[ 2.965397] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
376[ 5.131292] dwc3-qcom 76f8800.usb: IRQ hs_phy_irq not found
377[ 5.131943] dwc3-qcom 76f8800.usb: IRQ dp_hs_phy_irq not found
378[ 5.137016] dwc3-qcom 76f8800.usb: IRQ dm_hs_phy_irq not found
379[ 5.143256] dwc3-qcom 76f8800.usb: IRQ ss_phy_irq not found
380[ 5.186140] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
381[ 5.245000] dwc3-qcom 6af8800.usb: IRQ hs_phy_irq not found
382[ 5.245621] dwc3-qcom 6af8800.usb: IRQ dp_hs_phy_irq not found
383[ 5.250520] dwc3-qcom 6af8800.usb: IRQ dm_hs_phy_irq not found
384[ 5.256856] dwc3-qcom 6af8800.usb: IRQ ss_phy_irq not found
385[ 5.298834] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
386[ 5.534632] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
387[ 5.574464] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
388[ 5.804129] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
389[ 5.844117] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
390[ 5.941923] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): allocate IRQ 98, hwirq 1
391[ 5.942596] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): found parent hwirq 193
392[ 5.950463] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): alloc_irqs_parent for 98 parent hwirq 193
393[ 5.966893] input: gpio_keys as /devices/platform/gpio_keys/input/input0
394[ 5.982512] hctosys: unable to open rtc device (rtc0)
395[ 6.014564] ALSA device list:
396[ 6.015399] No soundcards found.
397[ 6.200285] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
398[ 6.241357] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
399[ 6.306013] random: fast init done
400[ 6.313103] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
401[ 6.313293] VFS: Mounted root (ext4 filesystem) on device 179:9.
402[ 6.327963] devtmpfs: mounted
403[ 6.329112] Freeing unused kernel memory: 5056K
404[ 6.330808] Run /lib/systemd/systemd as init process
405[ 6.987870] systemd[1]: System time before build time, advancing clock.
406[ 7.890608] NET: Registered protocol family 10
407[ 7.892597] Segment Routing with IPv6
408[ 8.012305] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
409[ 8.012741] systemd[1]: Detected architecture arm64.
410[ 8.077515] systemd[1]: Set hostname to <dragon410c>.
411[ 8.496119] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
412[ 8.496239] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
413[ 8.695084] random: systemd: uninitialized urandom read (16 bytes read)
414[ 8.695978] systemd[1]: Created slice System Slice.
415[ 8.716489] random: systemd: uninitialized urandom read (16 bytes read)
416[ 8.716762] systemd[1]: Listening on udev Kernel Socket.
417[ 8.736347] random: systemd: uninitialized urandom read (16 bytes read)
418[ 8.736697] systemd[1]: Listening on fsck to fsckd communication Socket.
419[ 8.765108] systemd[1]: Created slice system-getty.slice.
420[ 8.780666] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
421[ 9.305250] EXT4-fs (mmcblk0p9): re-mounted. Opts: errors=remount-ro
422[ 9.561160] systemd-journald[203]: Received request to flush runtime journal from PID 1
423[ 9.573207] systemd-journald[203]: File /var/log/journal/24065b0fe49ab91170e8f8915aeff600/system.journal corrupted or uncleanly shut down, renaming and replacing.
424[ 12.967179] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
425[ 12.970050] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
426[ 13.051080] qcom_q6v5_pas adsp-pil: adsp-pil supply cx not found, using dummy regulator
427[ 13.051202] qcom_q6v5_pas adsp-pil: adsp-pil supply px not found, using dummy regulator
428[ 13.087760] qcom-qmp-phy 34000.phy: Registered Qcom-QMP phy
429[ 13.091029] qcom-qmp-phy 34000.phy: phy initialization timed-out
430[ 13.116411] phy phy-34000.phy.0: phy init failed --> -110
431[ 13.116735] qcom-pcie: probe of 600000.pcie failed with error -110
432[ 13.119372] qcom-pcie 608000.pcie: 608000.pcie supply vddpe-3v3 not found, using dummy regulator
433[ 13.123542] qcom-qmp-phy 7410000.phy: Registered Qcom-QMP phy
434[ 13.125602] qcom-qmp-phy 34000.phy: phy initialization timed-out
435[ 13.126016] phy phy-34000.phy.1: phy init failed --> -110
436[ 13.133168] qcom-pcie: probe of 608000.pcie failed with error -110
437[ 13.134856] qcom-pcie 610000.pcie: 610000.pcie supply vddpe-3v3 not found, using dummy regulator
438[ 13.140851] qcom-qmp-phy 34000.phy: phy initialization timed-out
439[ 13.141315] phy phy-34000.phy.2: phy init failed --> -110
440[ 13.143026] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
441[ 13.149725] qcom-pcie: probe of 610000.pcie failed with error -110
442[ 13.151214] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
443[ 13.157286] qcom-qusb2-phy 7411000.phy: Registered Qcom-QUSB2 phy
444[ 13.157984] qcom-qusb2-phy 7412000.phy: Registered Qcom-QUSB2 phy
445[ 13.159640] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
446[ 13.175275] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
447[ 13.176280] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
448[ 13.176309] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
449[ 13.176492] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010
450[ 13.176561] xhci-hcd xhci-hcd.0.auto: irq 94, io mem 0x06a00000
451[ 13.181102] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
452[ 13.190685] NET: Registered protocol family 42
453[ 13.205282] hub 1-0:1.0: USB hub found
454[ 13.205359] hub 1-0:1.0: 1 port detected
455[ 13.205505] remoteproc remoteproc0: adsp-pil is available
456[ 13.205738] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
457[ 13.205761] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
458[ 13.205775] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
459[ 13.205876] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
460[ 13.206417] ufshcd-qcom 624000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
461[ 13.206432] ufshcd-qcom 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
462[ 13.206542] hub 2-0:1.0: USB hub found
463[ 13.206575] hub 2-0:1.0: 1 port detected
464[ 13.206893] ufshcd-qcom 624000.ufshc: Initialization failed
465[ 13.209699] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
466[ 13.214518] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000002010010
467[ 13.214594] xhci-hcd xhci-hcd.1.auto: irq 93, io mem 0x07600000
468[ 13.216022] hub 3-0:1.0: USB hub found
469[ 13.216069] hub 3-0:1.0: 1 port detected
470[ 13.216676] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
471[ 13.216694] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
472[ 13.216708] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
473[ 13.216779] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
474[ 13.217479] hub 4-0:1.0: USB hub found
475[ 13.217514] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
476[ 13.246714] remoteproc remoteproc0: Direct firmware load for adsp.mdt failed with error -2
477[ 13.247196] remoteproc remoteproc0: Falling back to sysfs fallback for: adsp.mdt
478[ 13.277915] ufshcd-qcom 624000.ufshc: ufshcd_pltfrm_init() failed -517
479[ 13.371379] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
480[ 13.403657] ufshcd-qcom 624000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
481[ 13.404037] ufshcd-qcom 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
482[ 13.410255] ufshcd-qcom 624000.ufshc: Initialization failed
483[ 13.445438] ufshcd-qcom 624000.ufshc: ufshcd_pltfrm_init() failed -517
484[ 13.794153] remoteproc remoteproc0: powering up adsp-pil
485[ 13.795766] remoteproc remoteproc0: Direct firmware load for adsp.mdt failed with error -2
486[ 13.796106] remoteproc remoteproc0: Falling back to sysfs fallback for: adsp.mdt
487[ 13.808113] remoteproc remoteproc0: request_firmware failed: -11
488[ 14.121648] FAT-fs (mmcblk0p8): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
489[ 14.336288] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
490[ 15.248263] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
491[ 15.248438] usb usb1-port1: attempt power cycle
492[ 16.480274] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
493[ 16.519494] adreno b00000.gpu: Adding to iommu group 0
494[ 16.531105] msm_mdp 901000.mdp: Adding to iommu group 1
495[ 16.531705] msm_mdp 901000.mdp: No interconnect support may cause display underflows!
496[ 16.538374] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
497[ 16.539848] ufshcd-qcom 624000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
498[ 16.539857] ufshcd-qcom 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
499[ 16.540375] ufshcd-qcom 624000.ufshc: Initialization failed
500[ 16.546318] msm 900000.mdss: 900000.mdss supply vdd not found, using dummy regulator
501[ 16.549197] msm_mdp 901000.mdp: [drm:mdp5_bind [msm]] MDP5 version v1.7
502[ 16.549365] msm 900000.mdss: bound 901000.mdp (ops mdp5_ops [msm])
503[ 16.552088] msm 900000.mdss: bound 9a0000.hdmi-tx (ops msm_hdmi_ops [msm])
504[ 16.553802] adreno b00000.gpu: b00000.gpu supply vdd not found, using dummy regulator
505[ 16.553914] adreno b00000.gpu: b00000.gpu supply vddcx not found, using dummy regulator
506[ 16.554578] msm 900000.mdss: [drm:msm_gpu_init [msm]] A530: using IOMMU
507[ 16.578935] ufshcd-qcom 624000.ufshc: ufshcd_pltfrm_init() failed -517
508[ 16.584963] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
509[ 16.586669] ufshcd-qcom 624000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
510[ 16.586677] ufshcd-qcom 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
511[ 16.593307] msm 900000.mdss: bound b00000.gpu (ops a3xx_ops [msm])
512[ 16.597956] ufshcd-qcom 624000.ufshc: Initialization failed
513[ 16.620549] ufshcd-qcom 624000.ufshc: ufshcd_pltfrm_init() failed -517
514[ 16.722813] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
515[ 16.722820] [drm] Driver supports precise vblank timestamp query.
516[ 16.724969] [drm] Initialized msm 1.5.0 20130625 for 900000.mdss on minor 0
517[ 16.934011] msm 900000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a530_pm4.fw from new location
518[ 16.939929] msm 900000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a530_pfp.fw from new location
519[ 16.950626] msm 900000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a530v3_gpmu.fw2 from new location
520[ 16.951585] ------------[ cut here ]------------
521[ 16.951592] gpu_gx_gfx3d_clk status stuck at 'off'
522[ 16.951626] WARNING: CPU: 1 PID: 282 at drivers/clk/qcom/clk-branch.c:91 clk_branch_toggle+0x198/0x1b8
523[ 16.951630] Modules linked in: msm(+) drm_kms_helper drm crct10dif_ce qrtr phy_qcom_qusb2 ufs_qcom phy_qcom_qmp qcom_q6v5_pas qcom_sysmon qmi_helpers qcom_q6v5 mdt_loader glink_ssr qcom_common qcom_glink_smem ip_tables x_tables ipv6 nf_defrag_ipv6
524[ 16.951666] CPU: 1 PID: 282 Comm: systemd-udevd Not tainted 5.4.0-00010-g3431d718bb15 #1
525[ 16.951670] Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
526[ 16.951676] pstate: 60000085 (nZCv daIf -PAN -UAO)
527[ 16.951681] pc : clk_branch_toggle+0x198/0x1b8
528[ 16.951686] lr : clk_branch_toggle+0x198/0x1b8
529[ 16.951689] sp : ffff800012713340
530[ 16.951693] x29: ffff800012713340 x28: 0000000000000000
531[ 16.951699] x27: ffff0000d9be6d28 x26: ffff0000d7109b80
532[ 16.951705] x25: ffff80001184bfb0 x24: 0000000000000000
533[ 16.951711] x23: ffff800011102e68 x22: 0000000000000001
534[ 16.951716] x21: ffff8000105c5c70 x20: ffff0000d7109b80
535[ 16.951722] x19: 0000000000000000 x18: ffff0000cfa97300
536[ 16.951727] x17: 0000000000000000 x16: 0000000000000000
537[ 16.951732] x15: ffff800011782000 x14: ffff800011941f72
538[ 16.951738] x13: 0000000000000000 x12: ffff800011941000
539[ 16.951743] x11: ffff800011782000 x10: ffff8000119415c0
540[ 16.951748] x9 : 00000000fffffffe x8 : 7461206b63757473
541[ 16.951754] x7 : 2073757461747320 x6 : ffff80001194161e
542[ 16.951759] x5 : 0000000000000000 x4 : 0000000000000000
543[ 16.951765] x3 : 00000000ffffffff x2 : ffff8000cd061000
544[ 16.951770] x1 : b90ea7f9d35c5600 x0 : 0000000000000000
545[ 16.951776] Call trace:
546[ 16.951783] clk_branch_toggle+0x198/0x1b8
547[ 16.951788] clk_branch2_enable+0x18/0x20
548[ 16.951794] clk_core_enable+0x64/0xb0
549[ 16.951798] clk_core_enable_lock+0x20/0x40
550[ 16.951803] clk_enable+0x14/0x28
551[ 16.951807] clk_bulk_enable+0x38/0xb0
552[ 16.951889] msm_gpu_pm_resume+0xa0/0x178 [msm]
553[ 16.951941] a5xx_pm_resume+0x14/0x148 [msm]
554[ 16.951993] adreno_resume+0x18/0x20 [msm]
555[ 16.952000] pm_generic_runtime_resume+0x28/0x40
556[ 16.952007] __genpd_runtime_resume+0x2c/0xa0
557[ 16.952012] genpd_runtime_resume+0x88/0x208
558[ 16.952017] __rpm_callback+0xd4/0x140
559[ 16.952021] rpm_callback+0x20/0x80
560[ 16.952026] rpm_resume+0x39c/0x580
561[ 16.952030] __pm_runtime_resume+0x38/0x80
562[ 16.952081] adreno_load_gpu+0x50/0x188 [msm]
563[ 16.952135] msm_open+0x94/0xa8 [msm]
564[ 16.952188] drm_file_alloc+0x11c/0x1e0 [drm]
565[ 16.952227] drm_client_init+0xac/0x148 [drm]
566[ 16.952253] drm_fb_helper_init.part.0+0x40/0x48 [drm_kms_helper]
567[ 16.952272] drm_fb_helper_init+0x18/0x30 [drm_kms_helper]
568[ 16.952333] msm_fbdev_init+0x5c/0xe8 [msm]
569[ 16.952385] msm_drm_bind+0x5a0/0x618 [msm]
570[ 16.952397] try_to_bring_up_master+0x164/0x1c0
571[ 16.952403] component_master_add_with_match+0xb0/0xf8
572[ 16.952456] msm_pdev_probe+0x268/0x308 [msm]
573[ 16.952465] platform_drv_probe+0x50/0xa0
574[ 16.952470] really_probe+0xd4/0x308
575[ 16.952475] driver_probe_device+0x54/0xe8
576[ 16.952480] device_driver_attach+0x6c/0x78
577[ 16.952485] __driver_attach+0x54/0xd0
578[ 16.952489] bus_for_each_dev+0x6c/0xc0
579[ 16.952494] driver_attach+0x20/0x28
580[ 16.952498] bus_add_driver+0x140/0x1e8
581[ 16.952503] driver_register+0x60/0x110
582[ 16.952508] __platform_driver_register+0x44/0x50
583[ 16.952559] msm_drm_register+0x54/0x68 [msm]
584[ 16.952567] do_one_initcall+0x50/0x190
585[ 16.952576] do_init_module+0x50/0x208
586[ 16.952581] load_module+0x1d1c/0x2298
587[ 16.952584] __do_sys_finit_module+0xd0/0xe8
588[ 16.952589] __arm64_sys_finit_module+0x1c/0x28
589[ 16.952597] el0_svc_common.constprop.0+0x68/0x160
590[ 16.952601] el0_svc_handler+0x20/0x80
591[ 16.952606] el0_svc+0x8/0xc
592[ 16.952611] ---[ end trace faf4299c1f86757b ]---
593[ 16.952729] Failed to enable clk 'core': -16
594[ 16.952874] msm 900000.mdss: [drm:adreno_load_gpu [msm]] *ERROR* Couldn't power up the GPU: -16
595[ 16.956121] [drm] Cannot find any crtc or sizes
596[ 16.965421] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
597[ 16.966936] ufshcd-qcom 624000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
598[ 16.966943] ufshcd-qcom 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
599[ 16.967359] ufshcd-qcom 624000.ufshc: Initialization failed
600[ 17.008347] ufshcd-qcom 624000.ufshc: ufshcd_pltfrm_init() failed -517
601[ 17.389075] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
602[ 17.389251] usb usb1-port1: unable to enumerate USB device
603[ 17.750748] usb usb2-port1: connect-debounce failed
604[ 17.972324] [drm] Cannot find any crtc or sizes
605[ 17.990920] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
606[ 18.021237] ufshcd-qcom 624000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
607[ 18.021974] ufshcd-qcom 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
608[ 18.032169] ufshcd-qcom 624000.ufshc: Initialization failed
609[ 18.063269] ufshcd-qcom 624000.ufshc: ufshcd_pltfrm_init() failed -517
610[ 36.214949] wlan-en-regulator: disabling