· 6 years ago · Sep 23, 2019, 11:36 AM
1dmesg
2[ 0.000000] microcode: microcode updated early to revision 0x25, date = 2019-02-26
3[ 0.000000] Linux version 4.19.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2 (2019-08-28)
4[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=UUID=ebc60996-b4eb-4f7a-9e14-80e4464bcd43 ro apparmor=1 security=apparmor apparmor=1 security=apparmor quiet
5[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
6[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
7[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
8[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
9[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
10[ 0.000000] BIOS-provided physical RAM map:
11[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
12[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094d5ffff] usable
15[ 0.000000] BIOS-e820: [mem 0x0000000094d60000-0x0000000095d5ffff] reserved
16[ 0.000000] BIOS-e820: [mem 0x0000000095d60000-0x000000009aabefff] usable
17[ 0.000000] BIOS-e820: [mem 0x000000009aabf000-0x000000009aebefff] reserved
18[ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
19[ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
20[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
21[ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
22[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
23[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
24[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
25[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
26[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
27[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
28[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
29[ 0.000000] NX (Execute Disable) protection: active
30[ 0.000000] SMBIOS 2.7 present.
31[ 0.000000] DMI: Dell Inc. Inspiron 3537/028XKX, BIOS A08 04/30/2014
32[ 0.000000] tsc: Fast TSC calibration using PIT
33[ 0.000000] tsc: Detected 2294.562 MHz processor
34[ 0.003076] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
35[ 0.003080] e820: remove [mem 0x000a0000-0x000fffff] usable
36[ 0.003090] last_pfn = 0x15f600 max_arch_pfn = 0x400000000
37[ 0.003096] MTRR default type: uncachable
38[ 0.003097] MTRR fixed ranges enabled:
39[ 0.003099] 00000-9FFFF write-back
40[ 0.003100] A0000-BFFFF uncachable
41[ 0.003101] C0000-E7FFF write-protect
42[ 0.003102] E8000-EFFFF write-combining
43[ 0.003103] F0000-FFFFF write-protect
44[ 0.003104] MTRR variable ranges enabled:
45[ 0.003106] 0 base 0000000000 mask 7F80000000 write-back
46[ 0.003108] 1 base 0080000000 mask 7FE0000000 write-back
47[ 0.003109] 2 base 009B000000 mask 7FFF000000 uncachable
48[ 0.003110] 3 base 009C000000 mask 7FFC000000 uncachable
49[ 0.003111] 4 base 00FFC00000 mask 7FFFC00000 write-protect
50[ 0.003112] 5 base 0100000000 mask 7F80000000 write-back
51[ 0.003114] 6 base 015F600000 mask 7FFFE00000 uncachable
52[ 0.003115] 7 base 015F800000 mask 7FFF800000 uncachable
53[ 0.003116] 8 base 0160000000 mask 7FE0000000 uncachable
54[ 0.003117] 9 disabled
55[ 0.004310] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
56[ 0.004474] last_pfn = 0x9b000 max_arch_pfn = 0x400000000
57[ 0.017822] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
58[ 0.018292] Using GB pages for direct mapping
59[ 0.018295] BRK [0x1fc01000, 0x1fc01fff] PGTABLE
60[ 0.018297] BRK [0x1fc02000, 0x1fc02fff] PGTABLE
61[ 0.018298] BRK [0x1fc03000, 0x1fc03fff] PGTABLE
62[ 0.018336] BRK [0x1fc04000, 0x1fc04fff] PGTABLE
63[ 0.018339] BRK [0x1fc05000, 0x1fc05fff] PGTABLE
64[ 0.018606] BRK [0x1fc06000, 0x1fc06fff] PGTABLE
65[ 0.018686] BRK [0x1fc07000, 0x1fc07fff] PGTABLE
66[ 0.018756] BRK [0x1fc08000, 0x1fc08fff] PGTABLE
67[ 0.018810] RAMDISK: [mem 0x31eb7000-0x34f52fff]
68[ 0.018818] ACPI: Early table checksum verification disabled
69[ 0.019130] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL )
70[ 0.019136] ACPI: XSDT 0x000000009AFFE210 0000A4 (v01 DELL CL09 00000001 01000013)
71[ 0.019143] ACPI: FACP 0x000000009AFF9000 00010C (v05 DELL CL09 00000001 ASL 00040000)
72[ 0.019151] ACPI: DSDT 0x000000009AFEA000 00BA05 (v01 DELL CL09 00000000 ASL 00040000)
73[ 0.019155] ACPI: FACS 0x000000009AFB8000 000040
74[ 0.019159] ACPI: UEFI 0x000000009AFFD000 000236 (v01 DELL CL09 00000001 ASL 00040000)
75[ 0.019163] ACPI: FPDT 0x000000009AFFB000 000044 (v01 DELL CL09 00000001 ASL 00040000)
76[ 0.019167] ACPI: ASF! 0x000000009AFFA000 0000A5 (v32 DELL CL09 00000001 ASL 00040000)
77[ 0.019171] ACPI: HPET 0x000000009AFF8000 000038 (v01 DELL CL09 00000001 ASL 00040000)
78[ 0.019175] ACPI: APIC 0x000000009AFF7000 00008C (v03 DELL CL09 00000001 ASL 00040000)
79[ 0.019179] ACPI: MCFG 0x000000009AFF6000 00003C (v01 DELL CL09 00000001 ASL 00040000)
80[ 0.019183] ACPI: SSDT 0x000000009AFE9000 0006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
81[ 0.019187] ACPI: BOOT 0x000000009AFE7000 000028 (v01 DELL CL09 00000001 ASL 00040000)
82[ 0.019192] ACPI: LPIT 0x000000009AFE6000 000094 (v01 DELL CL09 00000000 ASL 00040000)
83[ 0.019195] ACPI: ASPT 0x000000009AFE4000 000034 (v07 DELL CL09 00000001 ASL 00040000)
84[ 0.019199] ACPI: DBGP 0x000000009AFE3000 000034 (v01 DELL CL09 00000001 ASL 00040000)
85[ 0.019203] ACPI: SSDT 0x000000009AFDD000 000539 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
86[ 0.019208] ACPI: SSDT 0x000000009AFDC000 000AD8 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
87[ 0.019212] ACPI: SSDT 0x000000009AFD8000 00355E (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
88[ 0.019216] ACPI: SSDT 0x000000009AFD6000 001E3D (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
89[ 0.019228] ACPI: Local APIC address 0xfee00000
90[ 0.019340] No NUMA configuration found
91[ 0.019341] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
92[ 0.019346] NODE_DATA(0) allocated [mem 0x15f5f9000-0x15f5fdfff]
93[ 0.019379] Zone ranges:
94[ 0.019380] DMA [mem 0x0000000000001000-0x0000000000ffffff]
95[ 0.019382] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
96[ 0.019384] Normal [mem 0x0000000100000000-0x000000015f5fffff]
97[ 0.019386] Device empty
98[ 0.019387] Movable zone start for each node
99[ 0.019388] Early memory node ranges
100[ 0.019389] node 0: [mem 0x0000000000001000-0x000000000009cfff]
101[ 0.019390] node 0: [mem 0x0000000000100000-0x0000000094d5ffff]
102[ 0.019391] node 0: [mem 0x0000000095d60000-0x000000009aabefff]
103[ 0.019392] node 0: [mem 0x000000009afff000-0x000000009affffff]
104[ 0.019393] node 0: [mem 0x0000000100000000-0x000000015f5fffff]
105[ 0.019398] Reserved but unavailable: 100 pages
106[ 0.019400] Initmem setup node 0 [mem 0x0000000000001000-0x000000015f5fffff]
107[ 0.019402] On node 0 totalpages: 1019996
108[ 0.019403] DMA zone: 64 pages used for memmap
109[ 0.019404] DMA zone: 21 pages reserved
110[ 0.019405] DMA zone: 3996 pages, LIFO batch:0
111[ 0.019554] DMA32 zone: 9771 pages used for memmap
112[ 0.019555] DMA32 zone: 625344 pages, LIFO batch:63
113[ 0.044725] Normal zone: 6104 pages used for memmap
114[ 0.044727] Normal zone: 390656 pages, LIFO batch:63
115[ 0.058192] Reserving Intel graphics memory at [mem 0x9ba00000-0x9f9fffff]
116[ 0.058288] ACPI: PM-Timer IO Port: 0x1808
117[ 0.058290] ACPI: Local APIC address 0xfee00000
118[ 0.058307] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
119[ 0.058310] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
120[ 0.058312] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
121[ 0.058314] ACPI: IRQ0 used by override.
122[ 0.058315] ACPI: IRQ9 used by override.
123[ 0.058318] Using ACPI (MADT) for SMP configuration information
124[ 0.058320] ACPI: HPET id: 0x8086a201 base: 0xfed00000
125[ 0.058325] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
126[ 0.058350] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
127[ 0.058352] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
128[ 0.058353] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
129[ 0.058354] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
130[ 0.058354] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
131[ 0.058357] PM: Registered nosave memory: [mem 0x94d60000-0x95d5ffff]
132[ 0.058359] PM: Registered nosave memory: [mem 0x9aabf000-0x9aebefff]
133[ 0.058359] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
134[ 0.058360] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
135[ 0.058362] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
136[ 0.058363] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
137[ 0.058364] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
138[ 0.058365] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
139[ 0.058365] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
140[ 0.058366] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
141[ 0.058367] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
142[ 0.058368] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
143[ 0.058369] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
144[ 0.058369] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
145[ 0.058370] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
146[ 0.058371] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
147[ 0.058372] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
148[ 0.058374] [mem 0x9fa00000-0xdfffffff] available for PCI devices
149[ 0.058376] Booting paravirtualized kernel on bare hardware
150[ 0.058379] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
151[ 0.224348] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
152[ 0.224359] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
153[ 0.224734] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u262144
154[ 0.224744] pcpu-alloc: s144408 r8192 d31720 u262144 alloc=1*2097152
155[ 0.224746] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
156[ 0.224778] Built 1 zonelists, mobility grouping on. Total pages: 1004036
157[ 0.224779] Policy zone: Normal
158[ 0.224781] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=UUID=ebc60996-b4eb-4f7a-9e14-80e4464bcd43 ro apparmor=1 security=apparmor apparmor=1 security=apparmor quiet
159[ 0.230862] Calgary: detecting Calgary via BIOS EBDA area
160[ 0.230867] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
161[ 0.248524] Memory: 3872404K/4079984K available (10252K kernel code, 1243K rwdata, 3324K rodata, 1584K init, 2280K bss, 207580K reserved, 0K cma-reserved)
162[ 0.248669] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
163[ 0.248677] Kernel/User page tables isolation: enabled
164[ 0.248737] ftrace: allocating 31860 entries in 125 pages
165[ 0.269097] rcu: Hierarchical RCU implementation.
166[ 0.269099] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
167[ 0.269100] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
168[ 0.273596] NR_IRQS: 33024, nr_irqs: 760, preallocated irqs: 16
169[ 0.275907] Console: colour VGA+ 80x25
170[ 0.275913] console [tty0] enabled
171[ 0.275938] ACPI: Core revision 20180810
172[ 0.276223] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
173[ 0.276232] hpet clockevent registered
174[ 0.276237] APIC: Switch to symmetric I/O mode setup
175[ 0.276776] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
176[ 0.296240] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2113241492c, max_idle_ns: 440795225315 ns
177[ 0.296258] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.12 BogoMIPS (lpj=9178248)
178[ 0.296261] pid_max: default: 32768 minimum: 301
179[ 0.296306] Security Framework initialized
180[ 0.296308] Yama: disabled by default; enable with sysctl kernel.yama.*
181[ 0.296332] AppArmor: AppArmor initialized
182[ 0.297156] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
183[ 0.297595] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
184[ 0.297623] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
185[ 0.297640] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
186[ 0.297932] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
187[ 0.297933] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
188[ 0.297949] CPU0: Thermal monitoring enabled (TM1)
189[ 0.297966] process: using mwait in idle threads
190[ 0.297969] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
191[ 0.297970] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
192[ 0.297972] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
193[ 0.297974] Spectre V2 : Mitigation: Full generic retpoline
194[ 0.297975] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
195[ 0.297975] Spectre V2 : Enabling Restricted Speculation for firmware calls
196[ 0.297985] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
197[ 0.297985] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
198[ 0.297987] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
199[ 0.298024] MDS: Mitigation: Clear CPU buffers
200[ 0.298301] Freeing SMP alternatives memory: 24K
201[ 0.304329] TSC deadline timer enabled
202[ 0.304333] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (family: 0x6, model: 0x45, stepping: 0x1)
203[ 0.304458] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
204[ 0.304531] ... version: 3
205[ 0.304532] ... bit width: 48
206[ 0.304533] ... generic registers: 4
207[ 0.304534] ... value mask: 0000ffffffffffff
208[ 0.304535] ... max period: 00007fffffffffff
209[ 0.304535] ... fixed-purpose events: 3
210[ 0.304536] ... event mask: 000000070000000f
211[ 0.304586] rcu: Hierarchical SRCU implementation.
212[ 0.305134] random: crng done (trusting CPU's manufacturer)
213[ 0.305918] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
214[ 0.306005] smp: Bringing up secondary CPUs ...
215[ 0.306100] x86: Booting SMP configuration:
216[ 0.306101] .... node #0, CPUs: #1
217[ 0.307459] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
218[ 0.307459] #2 #3
219[ 0.311037] smp: Brought up 1 node, 4 CPUs
220[ 0.311037] smpboot: Max logical packages: 2
221[ 0.311037] smpboot: Total of 4 processors activated (18356.49 BogoMIPS)
222[ 0.312490] devtmpfs: initialized
223[ 0.312490] x86/mm: Memory block size: 128MB
224[ 0.312828] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
225[ 0.312828] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
226[ 0.312828] futex hash table entries: 2048 (order: 5, 131072 bytes)
227[ 0.312828] pinctrl core: initialized pinctrl subsystem
228[ 0.312828] NET: Registered protocol family 16
229[ 0.312828] audit: initializing netlink subsys (disabled)
230[ 0.312828] audit: type=2000 audit(1569236283.036:1): state=initialized audit_enabled=0 res=1
231[ 0.312828] cpuidle: using governor ladder
232[ 0.312828] cpuidle: using governor menu
233[ 0.312828] Simple Boot Flag at 0x44 set to 0x1
234[ 0.312828] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
235[ 0.312828] ACPI: bus type PCI registered
236[ 0.312828] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
237[ 0.312828] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
238[ 0.312828] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
239[ 0.312828] PCI: Using configuration type 1 for base access
240[ 0.312828] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
241[ 0.312828] mtrr: your CPUs had inconsistent variable MTRR settings
242[ 0.312828] mtrr: probably your BIOS does not setup all CPUs.
243[ 0.312828] mtrr: corrected configuration.
244[ 0.313281] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
245[ 0.313281] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
246[ 0.313281] ipmi:dmi: Invalid offset: 0
247[ 0.313281] ACPI: Added _OSI(Module Device)
248[ 0.313281] ACPI: Added _OSI(Processor Device)
249[ 0.313281] ACPI: Added _OSI(3.0 _SCP Extensions)
250[ 0.313281] ACPI: Added _OSI(Processor Aggregator Device)
251[ 0.313281] ACPI: Added _OSI(Linux-Dell-Video)
252[ 0.313281] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
253[ 0.330725] ACPI: 6 ACPI AML tables successfully acquired and loaded
254[ 0.335308] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
255[ 0.336630] ACPI: Dynamic OEM Table Load:
256[ 0.336640] ACPI: SSDT 0xFFFF8F5F19C00800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
257[ 0.337276] ACPI: Dynamic OEM Table Load:
258[ 0.337285] ACPI: SSDT 0xFFFF8F5F1A384800 0005AA (v01 PmRef ApIst 00003000 INTL 20130117)
259[ 0.337947] ACPI: Dynamic OEM Table Load:
260[ 0.337954] ACPI: SSDT 0xFFFF8F5F1A397600 000119 (v01 PmRef ApCst 00003000 INTL 20130117)
261[ 0.339360] ACPI: EC: EC started
262[ 0.339361] ACPI: EC: interrupt blocked
263[ 0.504267] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
264[ 0.504269] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
265[ 0.504271] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
266[ 0.504272] ACPI: Interpreter enabled
267[ 0.504323] ACPI: (supports S0 S3 S4 S5)
268[ 0.504324] ACPI: Using IOAPIC for interrupt routing
269[ 0.504362] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
270[ 0.504843] ACPI: Enabled 9 GPEs in block 00 to 7F
271[ 0.516540] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
272[ 0.516546] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
273[ 0.517233] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
274[ 0.517234] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
275[ 0.517924] PCI host bridge to bus 0000:00
276[ 0.517927] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
277[ 0.517930] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
278[ 0.517931] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
279[ 0.517933] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
280[ 0.517935] pci_bus 0000:00: root bus resource [bus 00-fe]
281[ 0.517945] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
282[ 0.518142] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
283[ 0.518158] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
284[ 0.518167] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
285[ 0.518172] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
286[ 0.518365] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
287[ 0.518379] pci 0000:00:03.0: reg 0x10: [mem 0xc0810000-0xc0813fff 64bit]
288[ 0.518597] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
289[ 0.518620] pci 0000:00:14.0: reg 0x10: [mem 0xc0800000-0xc080ffff 64bit]
290[ 0.518687] pci 0000:00:14.0: PME# supported from D3hot D3cold
291[ 0.518853] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
292[ 0.518878] pci 0000:00:16.0: reg 0x10: [mem 0xc0818000-0xc081801f 64bit]
293[ 0.518954] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
294[ 0.519129] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
295[ 0.519150] pci 0000:00:1b.0: reg 0x10: [mem 0xc0814000-0xc0817fff 64bit]
296[ 0.519226] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
297[ 0.519390] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
298[ 0.519474] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
299[ 0.519701] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
300[ 0.519784] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
301[ 0.520003] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
302[ 0.520084] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
303[ 0.520318] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
304[ 0.522318] pci 0000:00:1d.0: reg 0x10: [mem 0xc081c000-0xc081c3ff]
305[ 0.528260] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
306[ 0.528441] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
307[ 0.528725] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
308[ 0.528743] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
309[ 0.528751] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
310[ 0.528758] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
311[ 0.528766] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
312[ 0.528774] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
313[ 0.528782] pci 0000:00:1f.2: reg 0x24: [mem 0xc081b000-0xc081b7ff]
314[ 0.528820] pci 0000:00:1f.2: PME# supported from D3hot
315[ 0.528981] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
316[ 0.529001] pci 0000:00:1f.3: reg 0x10: [mem 0xc0819000-0xc08190ff 64bit]
317[ 0.529022] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
318[ 0.529281] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
319[ 0.529322] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff]
320[ 0.529356] pci 0000:01:00.0: reg 0x18: [mem 0xc0700000-0xc0700fff 64bit]
321[ 0.529379] pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
322[ 0.529503] pci 0000:01:00.0: supports D1 D2
323[ 0.529504] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
324[ 0.529673] pci 0000:00:1c.0: PCI bridge to [bus 01]
325[ 0.529677] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
326[ 0.529680] pci 0000:00:1c.0: bridge window [mem 0xc0700000-0xc07fffff]
327[ 0.529685] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
328[ 0.529763] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
329[ 0.529815] pci 0000:02:00.0: reg 0x10: [mem 0xc0600000-0xc067ffff 64bit]
330[ 0.529894] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
331[ 0.530012] pci 0000:02:00.0: supports D1 D2
332[ 0.530013] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
333[ 0.530170] pci 0000:00:1c.3: PCI bridge to [bus 02]
334[ 0.530175] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc06fffff]
335[ 0.530263] pci 0000:03:00.0: [1002:6660] type 00 class 0x038000
336[ 0.530302] pci 0000:03:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
337[ 0.530322] pci 0000:03:00.0: reg 0x18: [mem 0xc0500000-0xc053ffff 64bit]
338[ 0.530335] pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff]
339[ 0.530361] pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
340[ 0.530371] pci 0000:03:00.0: enabling Extended Tags
341[ 0.530454] pci 0000:03:00.0: supports D1 D2
342[ 0.530455] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
343[ 0.530493] pci 0000:03:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 63.008 Gb/s with 8 GT/s x8 link)
344[ 0.530619] pci 0000:00:1c.4: PCI bridge to [bus 03]
345[ 0.530623] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
346[ 0.530626] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
347[ 0.530631] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
348[ 0.612824] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
349[ 0.612887] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
350[ 0.612947] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
351[ 0.613005] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
352[ 0.613062] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
353[ 0.613121] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
354[ 0.613179] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
355[ 0.613236] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
356[ 0.613634] ACPI: EC: interrupt unblocked
357[ 0.613646] ACPI: EC: event unblocked
358[ 0.613653] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
359[ 0.613655] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
360[ 0.613747] pci 0000:00:02.0: vgaarb: setting as boot VGA device
361[ 0.613747] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
362[ 0.613747] pci 0000:00:02.0: vgaarb: bridge control possible
363[ 0.613747] vgaarb: loaded
364[ 0.613747] pps_core: LinuxPPS API ver. 1 registered
365[ 0.613747] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
366[ 0.613747] PTP clock support registered
367[ 0.613747] EDAC MC: Ver: 3.0.0
368[ 0.613747] PCI: Using ACPI for IRQ routing
369[ 0.620490] PCI: pci_cache_line_size set to 64 bytes
370[ 0.620550] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
371[ 0.620551] e820: reserve RAM buffer [mem 0x94d60000-0x97ffffff]
372[ 0.620552] e820: reserve RAM buffer [mem 0x9aabf000-0x9bffffff]
373[ 0.620554] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
374[ 0.620555] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
375[ 0.620869] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
376[ 0.620878] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
377[ 0.622907] clocksource: Switched to clocksource tsc-early
378[ 0.633104] VFS: Disk quotas dquot_6.6.0
379[ 0.633127] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
380[ 0.633270] AppArmor: AppArmor Filesystem Enabled
381[ 0.633293] pnp: PnP ACPI init
382[ 0.633512] system 00:00: [io 0x0680-0x069f] has been reserved
383[ 0.633515] system 00:00: [io 0xfd60-0xfd63] has been reserved
384[ 0.633518] system 00:00: [io 0xffff] has been reserved
385[ 0.633520] system 00:00: [io 0xffff] has been reserved
386[ 0.633522] system 00:00: [io 0xffff] has been reserved
387[ 0.633524] system 00:00: [io 0x1800-0x18fe] has been reserved
388[ 0.633526] system 00:00: [io 0x164e-0x164f] has been reserved
389[ 0.633533] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
390[ 0.633597] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
391[ 0.633668] system 00:02: [io 0x1854-0x1857] has been reserved
392[ 0.633673] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
393[ 0.633729] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
394[ 0.633765] pnp 00:04: Plug and Play ACPI device, IDs DLL05eb PNP0f13 (active)
395[ 0.724449] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
396[ 0.724452] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
397[ 0.724453] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
398[ 0.724455] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
399[ 0.724457] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
400[ 0.724459] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
401[ 0.724461] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
402[ 0.724462] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
403[ 0.724465] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
404[ 0.724467] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
405[ 0.724468] system 00:05: [mem 0x9fa22000-0x9fa22fff] has been reserved
406[ 0.724470] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved
407[ 0.724475] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
408[ 0.725174] pnp: PnP ACPI: found 6 devices
409[ 0.731308] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
410[ 0.731315] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
411[ 0.731317] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
412[ 0.731345] pci 0000:00:1c.0: PCI bridge to [bus 01]
413[ 0.731348] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
414[ 0.731353] pci 0000:00:1c.0: bridge window [mem 0xc0700000-0xc07fffff]
415[ 0.731356] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
416[ 0.731365] pci 0000:02:00.0: BAR 6: assigned [mem 0xc0680000-0xc068ffff pref]
417[ 0.731367] pci 0000:00:1c.3: PCI bridge to [bus 02]
418[ 0.731371] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc06fffff]
419[ 0.731380] pci 0000:03:00.0: BAR 6: assigned [mem 0xc0540000-0xc055ffff pref]
420[ 0.731381] pci 0000:00:1c.4: PCI bridge to [bus 03]
421[ 0.731384] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
422[ 0.731388] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
423[ 0.731392] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
424[ 0.731399] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
425[ 0.731401] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
426[ 0.731403] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
427[ 0.731404] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
428[ 0.731406] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
429[ 0.731407] pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff]
430[ 0.731409] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
431[ 0.731411] pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff]
432[ 0.731412] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
433[ 0.731414] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
434[ 0.731415] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
435[ 0.731571] NET: Registered protocol family 2
436[ 0.731784] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
437[ 0.731806] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
438[ 0.731876] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
439[ 0.731973] TCP: Hash tables configured (established 32768 bind 32768)
440[ 0.732020] UDP hash table entries: 2048 (order: 4, 65536 bytes)
441[ 0.732038] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
442[ 0.732107] NET: Registered protocol family 1
443[ 0.732113] NET: Registered protocol family 44
444[ 0.732125] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
445[ 0.752373] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c1 took 18326 usecs
446[ 0.752402] PCI: CLS 64 bytes, default 64
447[ 0.752445] Unpacking initramfs...
448[ 1.908944] Freeing initrd memory: 49776K
449[ 1.908960] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
450[ 1.908962] software IO TLB: mapped [mem 0x96abf000-0x9aabf000] (64MB)
451[ 1.909916] Initialise system trusted keyrings
452[ 1.909928] Key type blacklist registered
453[ 1.909991] workingset: timestamp_bits=40 max_order=20 bucket_order=0
454[ 1.911674] zbud: loaded
455[ 2.164956] Key type asymmetric registered
456[ 2.164958] Asymmetric key parser 'x509' registered
457[ 2.164970] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
458[ 2.165010] io scheduler noop registered
459[ 2.165012] io scheduler deadline registered
460[ 2.165056] io scheduler cfq registered (default)
461[ 2.165057] io scheduler mq-deadline registered
462[ 2.165882] pcieport 0000:00:1c.0: Signaling PME with IRQ 40
463[ 2.165903] pcieport 0000:00:1c.3: Signaling PME with IRQ 41
464[ 2.165925] pcieport 0000:00:1c.4: Signaling PME with IRQ 42
465[ 2.165957] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
466[ 2.165976] intel_idle: MWAIT substates: 0x11142120
467[ 2.165977] intel_idle: v0.4.1 model 0x45
468[ 2.166265] intel_idle: lapic_timer_reliable_states 0xffffffff
469[ 2.166639] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
470[ 2.167221] Linux agpgart interface v0.103
471[ 2.167286] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
472[ 2.167286] AMD IOMMUv2 functionality not available on this system
473[ 2.167676] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
474[ 2.185915] serio: i8042 KBD port at 0x60,0x64 irq 1
475[ 2.185920] serio: i8042 AUX port at 0x60,0x64 irq 12
476[ 2.186254] mousedev: PS/2 mouse device common for all mice
477[ 2.188288] rtc_cmos 00:01: RTC can wake from S4
478[ 2.188543] rtc_cmos 00:01: registered as rtc0
479[ 2.188567] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
480[ 2.188586] intel_pstate: Intel P-state driver initializing
481[ 2.188930] ledtrig-cpu: registered to indicate activity on CPUs
482[ 2.190062] NET: Registered protocol family 10
483[ 2.206068] Segment Routing with IPv6
484[ 2.206091] mip6: Mobile IPv6
485[ 2.206094] NET: Registered protocol family 17
486[ 2.206144] mpls_gso: MPLS GSO support
487[ 2.206353] mce: Using 7 MCE banks
488[ 2.206403] microcode: sig=0x40651, pf=0x40, revision=0x25
489[ 2.206510] microcode: Microcode Update Driver: v2.2.
490[ 2.206543] sched_clock: Marking stable (2204114943, 2389358)->(2214969971, -8465670)
491[ 2.206748] registered taskstats version 1
492[ 2.206748] Loading compiled-in X.509 certificates
493[ 2.208789] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
494[ 2.245944] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
495[ 2.245957] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
496[ 2.245973] zswap: loaded using pool lzo/zbud
497[ 2.246074] AppArmor: AppArmor sha1 policy hashing enabled
498[ 2.246555] rtc_cmos 00:01: setting system clock to 2019-09-23 10:58:05 UTC (1569236285)
499[ 2.247772] Freeing unused kernel image memory: 1584K
500[ 2.260324] Write protecting the kernel read-only data: 16384k
501[ 2.260984] Freeing unused kernel image memory: 2028K
502[ 2.261217] Freeing unused kernel image memory: 772K
503[ 2.270296] x86/mm: Checked W+X mappings: passed, no W+X pages found.
504[ 2.270297] x86/mm: Checking user space page tables
505[ 2.279333] x86/mm: Checked W+X mappings: passed, no W+X pages found.
506[ 2.279334] Run /init as init process
507[ 2.341625] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input2
508[ 2.341646] ACPI: Lid Switch [LID0]
509[ 2.341710] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3
510[ 2.341721] ACPI: Power Button [PWRB]
511[ 2.341819] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
512[ 2.341832] ACPI: Power Button [PWRF]
513[ 2.354467] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
514[ 2.386179] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
515[ 2.392065] cryptd: max_cpu_qlen set to 1000
516[ 2.402062] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
517[ 2.409411] ACPI: bus type USB registered
518[ 2.409438] usbcore: registered new interface driver usbfs
519[ 2.409448] usbcore: registered new interface driver hub
520[ 2.409478] usbcore: registered new device driver usb
521[ 2.426104] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
522[ 2.427230] ehci-pci: EHCI PCI platform driver
523[ 2.427442] ehci-pci 0000:00:1d.0: EHCI Host Controller
524[ 2.427449] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
525[ 2.427462] ehci-pci 0000:00:1d.0: debug port 2
526[ 2.431387] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
527[ 2.431425] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc081c000
528[ 2.431510] AVX2 version of gcm_enc/dec engaged.
529[ 2.431512] AES CTR mode by8 optimization enabled
530[ 2.438544] SCSI subsystem initialized
531[ 2.446099] libphy: r8169: probed
532[ 2.446307] r8169 0000:01:00.0 eth0: RTL8106e, ec:f4:bb:8c:8f:bb, XID 44900000, IRQ 43
533[ 2.456271] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
534[ 2.456326] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
535[ 2.456328] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
536[ 2.456330] usb usb1: Product: EHCI Host Controller
537[ 2.456331] usb usb1: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd
538[ 2.456333] usb usb1: SerialNumber: 0000:00:1d.0
539[ 2.456473] hub 1-0:1.0: USB hub found
540[ 2.456480] hub 1-0:1.0: 2 ports detected
541[ 2.456782] xhci_hcd 0000:00:14.0: xHCI Host Controller
542[ 2.456789] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
543[ 2.457835] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
544[ 2.457840] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
545[ 2.458010] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
546[ 2.458012] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
547[ 2.458014] usb usb2: Product: xHCI Host Controller
548[ 2.458015] usb usb2: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd
549[ 2.458017] usb usb2: SerialNumber: 0000:00:14.0
550[ 2.458141] hub 2-0:1.0: USB hub found
551[ 2.458153] hub 2-0:1.0: 9 ports detected
552[ 2.459957] xhci_hcd 0000:00:14.0: xHCI Host Controller
553[ 2.459961] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
554[ 2.459965] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
555[ 2.460009] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
556[ 2.460011] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
557[ 2.460013] usb usb3: Product: xHCI Host Controller
558[ 2.460015] usb usb3: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd
559[ 2.460016] usb usb3: SerialNumber: 0000:00:14.0
560[ 2.460135] hub 3-0:1.0: USB hub found
561[ 2.460144] hub 3-0:1.0: 4 ports detected
562[ 2.473708] r8169 0000:01:00.0 enp1s0: renamed from eth0
563[ 2.488373] libata version 3.00 loaded.
564[ 2.497381] ahci 0000:00:1f.2: version 3.0
565[ 2.507651] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
566[ 2.507654] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst
567[ 2.508150] scsi host0: ahci
568[ 2.508336] scsi host1: ahci
569[ 2.508457] scsi host2: ahci
570[ 2.508527] ata1: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b100 irq 45
571[ 2.508529] ata2: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b180 irq 45
572[ 2.508530] ata3: DUMMY
573[ 2.528353] [drm] radeon kernel modesetting enabled.
574[ 2.528375] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
575[ 2.528480] ATPX version 1, functions 0x00000033
576[ 2.528639] radeon 0000:03:00.0: enabling device (0006 -> 0007)
577[ 2.528848] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x1028:0x05EA 0x00).
578[ 2.550559] [drm] Replacing VGA console driver
579[ 2.551748] Console: switching to colour dummy device 80x25
580[ 2.557207] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
581[ 2.557208] [drm] Driver supports precise vblank timestamp query.
582[ 2.557552] vga_switcheroo: enabled
583[ 2.557568] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
584[ 2.559293] ATOM BIOS: Dell
585[ 2.559351] radeon 0000:03:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
586[ 2.559353] radeon 0000:03:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
587[ 2.559357] [drm] Detected VRAM RAM=1024M, BAR=256M
588[ 2.559358] [drm] RAM width 64bits DDR
589[ 2.559594] [TTM] Zone kernel: Available graphics memory: 1963294 kiB
590[ 2.559595] [TTM] Initializing pool allocator
591[ 2.559599] [TTM] Initializing DMA pool allocator
592[ 2.559619] [drm] radeon: 1024M of VRAM memory ready
593[ 2.559620] [drm] radeon: 2048M of GTT memory ready.
594[ 2.559628] [drm] Loading hainan Microcode
595[ 2.559662] radeon 0000:03:00.0: firmware: direct-loading firmware radeon/hainan_pfp.bin
596[ 2.559679] radeon 0000:03:00.0: firmware: direct-loading firmware radeon/hainan_me.bin
597[ 2.559696] radeon 0000:03:00.0: firmware: direct-loading firmware radeon/hainan_ce.bin
598[ 2.559712] radeon 0000:03:00.0: firmware: direct-loading firmware radeon/hainan_rlc.bin
599[ 2.559733] radeon 0000:03:00.0: firmware: direct-loading firmware radeon/hainan_mc.bin
600[ 2.559762] radeon 0000:03:00.0: firmware: direct-loading firmware radeon/hainan_smc.bin
601[ 2.559765] [drm] Internal thermal controller without fan control
602[ 2.569512] [drm] radeon: dpm initialized
603[ 2.569516] [drm] GART: num cpu pages 524288, num gpu pages 524288
604[ 2.571145] [drm] PCIE gen 2 link speeds already enabled
605[ 2.579577] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
606[ 2.579705] radeon 0000:03:00.0: WB enabled
607[ 2.579708] radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0000000093613fd3
608[ 2.579710] radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0x00000000c9fefba2
609[ 2.579712] radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0x000000000ea067e7
610[ 2.579714] radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x000000004e353b46
611[ 2.579715] radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0x000000003edc5838
612[ 2.579717] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
613[ 2.579717] [drm] Driver supports precise vblank timestamp query.
614[ 2.579719] radeon 0000:03:00.0: radeon: MSI limited to 32-bit
615[ 2.579772] radeon 0000:03:00.0: radeon: using MSI.
616[ 2.579802] [drm] radeon: irq initialized.
617[ 2.792278] usb 1-1: new high-speed USB device number 2 using ehci-pci
618[ 2.821583] [drm] ring test on 0 succeeded in 1 usecs
619[ 2.821589] [drm] ring test on 1 succeeded in 1 usecs
620[ 2.821595] [drm] ring test on 2 succeeded in 1 usecs
621[ 2.821603] [drm] ring test on 3 succeeded in 4 usecs
622[ 2.821610] [drm] ring test on 4 succeeded in 4 usecs
623[ 2.821760] [drm] ib test on ring 0 succeeded in 0 usecs
624[ 2.821787] [drm] ib test on ring 1 succeeded in 0 usecs
625[ 2.821836] [drm] ib test on ring 2 succeeded in 0 usecs
626[ 2.821863] [drm] ib test on ring 3 succeeded in 0 usecs
627[ 2.821905] [drm] ib test on ring 4 succeeded in 0 usecs
628[ 2.822192] [drm] Radeon Display Connectors
629[ 2.822911] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
630[ 2.823486] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
631[ 2.823542] [drm] Initialized radeon 2.50.0 20080528 for 0000:03:00.0 on minor 0
632[ 2.824777] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 1
633[ 2.824978] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
634[ 2.825947] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A100, max UDMA/100
635[ 2.826254] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
636[ 2.826261] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.GFX0.DD02._BCL], AE_NOT_FOUND (20180810/psargs-330)
637[ 2.826274] ACPI Error: Method parse/execution failed \_SB.PCI0.RP05.PEGP.DD02._BCL, AE_NOT_FOUND (20180810/psparse-516)
638[ 2.826507] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:38/LNXVIDEO:00/input/input6
639[ 2.828373] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
640[ 2.828567] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
641[ 2.829344] ata2.00: configured for UDMA/100
642[ 2.830945] ata1.00: ATA-9: ADATA SU650, R0522A0, max UDMA/133
643[ 2.830948] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
644[ 2.833399] fbcon: inteldrmfb (fb0) is primary device
645[ 2.842663] ata1.00: configured for UDMA/133
646[ 2.842783] scsi 0:0:0:0: Direct-Access ATA ADATA SU650 2A0 PQ: 0 ANSI: 5
647[ 2.844046] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A100 PQ: 0 ANSI: 5
648[ 2.932275] tsc: Refined TSC clocksource calibration: 2294.687 MHz
649[ 2.932282] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139a22526, max_idle_ns: 440795252169 ns
650[ 2.963123] clocksource: Switched to clocksource tsc
651[ 2.968031] [drm] amdgpu kernel modesetting enabled.
652[ 2.968051] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
653[ 2.968182] ATPX version 1, functions 0x00000033
654[ 2.980659] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
655[ 2.980662] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
656[ 2.981060] hub 1-1:1.0: USB hub found
657[ 2.981122] hub 1-1:1.0: 8 ports detected
658[ 3.259616] psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4754]
659[ 3.268351] usb 1-1.5: new full-speed USB device number 3 using ehci-pci
660[ 3.321518] psmouse serio1: synaptics: queried min coordinates: x [1268..], y [1098..]
661[ 3.321527] psmouse serio1: synaptics: Your touchpad (PNP: DLL05eb PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
662[ 3.377750] usb 1-1.5: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.01
663[ 3.377754] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
664[ 3.436666] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00/0x0, board id: 2382, fw id: 1238635
665[ 3.460305] usb 1-1.7: new high-speed USB device number 4 using ehci-pci
666[ 3.513343] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
667[ 3.569135] usb 1-1.7: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
668[ 3.569138] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
669[ 3.569140] usb 1-1.7: Product: USB2.0-CRW
670[ 3.569142] usb 1-1.7: Manufacturer: Generic
671[ 3.569143] usb 1-1.7: SerialNumber: 20100201396000000
672[ 3.576173] usbcore: registered new interface driver rtsx_usb
673[ 3.648358] usb 1-1.8: new high-speed USB device number 5 using ehci-pci
674[ 3.821732] usb 1-1.8: New USB device found, idVendor=0c45, idProduct=64ad, bcdDevice=33.11
675[ 3.821735] usb 1-1.8: New USB device strings: Mfr=2, Product=1, SerialNumber=0
676[ 3.821737] usb 1-1.8: Product: Laptop_Integrated_Webcam_HD
677[ 3.821739] usb 1-1.8: Manufacturer: CN0Y3PX872487427A5X2A01
678[ 3.943003] Console: switching to colour frame buffer device 170x48
679[ 3.964313] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
680[ 3.994933] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
681[ 3.994941] sd 0:0:0:0: [sda] Write Protect is off
682[ 3.994944] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
683[ 3.994954] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
684[ 3.996033] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
685[ 3.996461] sd 0:0:0:0: [sda] Attached SCSI disk
686[ 4.029730] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
687[ 4.029733] cdrom: Uniform CD-ROM driver Revision: 3.20
688[ 4.030023] sr 1:0:0:0: Attached scsi CD-ROM sr0
689[ 4.341754] PM: Image not found (code -22)
690[ 4.487978] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
691[ 4.713285] systemd[1]: Inserted module 'autofs4'
692[ 4.742189] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
693[ 4.760496] systemd[1]: Detected architecture x86-64.
694[ 4.765239] systemd[1]: Set hostname to <Dell>.
695[ 4.765901] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
696[ 4.933172] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
697[ 4.955907] systemd[1]: /lib/systemd/system/fail2ban.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/fail2ban/fail2ban.pid → /run/fail2ban/fail2ban.pid; please update the unit file accordingly.
698[ 4.980513] systemd[1]: Created slice system-tor.slice.
699[ 4.980555] systemd[1]: Reached target User and Group Name Lookups.
700[ 4.980721] systemd[1]: Created slice User and Session Slice.
701[ 4.980798] systemd[1]: Listening on udev Kernel Socket.
702[ 5.011978] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
703[ 5.024581] lp: driver loaded but no devices found
704[ 5.030357] ppdev: user-space parallel port driver
705[ 5.238658] ACPI: AC Adapter [ACAD] (off-line)
706[ 5.305125] iTCO_vendor_support: vendor-support=0
707[ 5.307950] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
708[ 5.307994] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
709[ 5.308123] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
710[ 5.360800] input: PC Speaker as /devices/platform/pcspkr/input/input8
711[ 5.364627] sd 0:0:0:0: Attached scsi generic sg0 type 0
712[ 5.366320] sr 1:0:0:0: Attached scsi generic sg1 type 5
713[ 5.400555] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
714[ 5.408135] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9
715[ 5.454111] media: Linux media interface: v0.10
716[ 5.455480] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
717[ 5.455482] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
718[ 5.455483] RAPL PMU: hw unit of domain package 2^-14 Joules
719[ 5.455484] RAPL PMU: hw unit of domain dram 2^-14 Joules
720[ 5.455485] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
721[ 5.550690] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
722[ 5.550965] videodev: Linux video capture interface: v2.00
723[ 5.551568] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
724[ 5.552355] battery: ACPI: Battery Slot [BAT1] (battery present)
725[ 5.615833] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3223: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
726[ 5.615837] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
727[ 5.615838] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
728[ 5.615840] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
729[ 5.615842] snd_hda_codec_realtek hdaudioC1D0: inputs:
730[ 5.615844] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19
731[ 5.615845] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a
732[ 5.615847] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
733[ 5.627374] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
734[ 5.632212] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
735[ 5.632308] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
736[ 5.632366] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
737[ 5.632461] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
738[ 5.676070] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
739[ 5.800207] Bluetooth: Core ver 2.22
740[ 5.800223] NET: Registered protocol family 31
741[ 5.800223] Bluetooth: HCI device and connection manager initialized
742[ 5.800227] Bluetooth: HCI socket layer initialized
743[ 5.800230] Bluetooth: L2CAP socket layer initialized
744[ 5.800236] Bluetooth: SCO socket layer initialized
745[ 5.804437] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64ad)
746[ 5.844344] usbcore: registered new interface driver btusb
747[ 5.856668] usb 1-1.5: firmware: direct-loading firmware ar3k/AthrBT_0x31010000.dfu
748[ 5.876224] uvcvideo 1-1.8:1.0: Entity type for entity Extension 4 was not initialized!
749[ 5.876229] uvcvideo 1-1.8:1.0: Entity type for entity Extension 3 was not initialized!
750[ 5.876231] uvcvideo 1-1.8:1.0: Entity type for entity Processing 2 was not initialized!
751[ 5.876233] uvcvideo 1-1.8:1.0: Entity type for entity Camera 1 was not initialized!
752[ 5.878923] input: Laptop_Integrated_Webcam_HD: In as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/input/input16
753[ 5.879006] usbcore: registered new interface driver uvcvideo
754[ 5.879007] USB Video Class driver (1.1.1)
755[ 5.879540] intel_rapl: Found RAPL domain package
756[ 5.879542] intel_rapl: Found RAPL domain core
757[ 5.879543] intel_rapl: Found RAPL domain uncore
758[ 5.879544] intel_rapl: Found RAPL domain dram
759[ 5.879547] intel_rapl: RAPL package 0 domain package locked by BIOS
760[ 5.907412] usb 1-1.5: firmware: direct-loading firmware ar3k/ramps_0x31010000_40.dfu
761[ 5.912570] usbcore: registered new interface driver ath3k
762[ 5.913895] Adding 4071420k swap on /dev/sda6. Priority:-2 extents:1 across:4071420k SSFS
763[ 5.925861] ath: phy0: WB335 1-ANT card detected
764[ 5.925864] ath: phy0: Set BT/WLAN RX diversity capability
765[ 5.935369] ath: phy0: Enable LNA combining
766[ 5.936658] ath: phy0: ASPM enabled: 0x43
767[ 5.936659] ath: EEPROM regdomain: 0x60
768[ 5.936660] ath: EEPROM indicates we should expect a direct regpair map
769[ 5.936661] ath: Country alpha2 being used: 00
770[ 5.936662] ath: Regpair used: 0x60
771[ 5.945056] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
772[ 5.945264] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffff9e6001400000, irq=19
773[ 5.962967] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
774[ 5.972256] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
775[ 5.979995] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
776[ 5.982409] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
777[ 6.007135] systemd-journald[282]: Received request to flush runtime journal from PID 1
778[ 6.018498] usb 1-1.5: USB disconnect, device number 3
779[ 6.078229] audit: type=1400 audit(1569236289.328:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=517 comm="apparmor_parser"
780[ 6.078653] audit: type=1400 audit(1569236289.328:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/dnsmasq" pid=519 comm="apparmor_parser"
781[ 6.078658] audit: type=1400 audit(1569236289.328:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/dnsmasq//libvirt_leaseshelper" pid=519 comm="apparmor_parser"
782[ 6.087876] audit: type=1400 audit(1569236289.336:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=518 comm="apparmor_parser"
783[ 6.087881] audit: type=1400 audit(1569236289.336:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=518 comm="apparmor_parser"
784[ 6.087883] audit: type=1400 audit(1569236289.336:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=518 comm="apparmor_parser"
785[ 6.094994] audit: type=1400 audit(1569236289.344:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=525 comm="apparmor_parser"
786[ 6.094998] audit: type=1400 audit(1569236289.344:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=525 comm="apparmor_parser"
787[ 6.095001] audit: type=1400 audit(1569236289.344:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=525 comm="apparmor_parser"
788[ 6.097237] audit: type=1400 audit(1569236289.348:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=524 comm="apparmor_parser"
789[ 6.240263] usb 1-1.5: new full-speed USB device number 6 using ehci-pci
790[ 6.805172] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
791[ 6.805355] r8169 0000:01:00.0: firmware: failed to load rtl_nic/rtl8106e-1.fw (-2)
792[ 6.806223] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
793[ 6.806851] r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8106e-1.fw failed with error -2
794[ 6.806854] r8169 0000:01:00.0 enp1s0: unable to load firmware patch rtl_nic/rtl8106e-1.fw (-2)
795[ 6.807280] Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
796[ 7.016430] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
797[ 7.022137] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
798[ 7.034764] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
799[ 7.055790] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
800[ 7.130264] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
801[ 9.029284] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
802[ 9.029286] Bluetooth: BNEP filters: protocol multicast
803[ 9.029290] Bluetooth: BNEP socket layer initialized
804[ 11.361529] usb 1-1.5: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.02
805[ 11.361533] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
806[ 11.470613] Bluetooth: RFCOMM TTY layer initialized
807[ 11.470620] Bluetooth: RFCOMM socket layer initialized
808[ 11.470626] Bluetooth: RFCOMM ver 1.11
809[ 20.346805] [drm] PCIE gen 2 link speeds already enabled
810[ 20.359026] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
811[ 20.359138] radeon 0000:03:00.0: WB enabled
812[ 20.359140] radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0000000093613fd3
813[ 20.359141] radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0x00000000c9fefba2
814[ 20.359142] radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0x000000000ea067e7
815[ 20.359143] radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x000000004e353b46
816[ 20.359144] radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0x000000003edc5838
817[ 20.599551] [drm] ring test on 0 succeeded in 1 usecs
818[ 20.599558] [drm] ring test on 1 succeeded in 1 usecs
819[ 20.599563] [drm] ring test on 2 succeeded in 1 usecs
820[ 20.599571] [drm] ring test on 3 succeeded in 4 usecs
821[ 20.599578] [drm] ring test on 4 succeeded in 4 usecs
822[ 20.599642] [drm] ib test on ring 0 succeeded in 0 usecs
823[ 20.599700] [drm] ib test on ring 1 succeeded in 0 usecs
824[ 20.599755] [drm] ib test on ring 2 succeeded in 0 usecs
825[ 20.599769] [drm] ib test on ring 3 succeeded in 0 usecs
826[ 20.599801] [drm] ib test on ring 4 succeeded in 0 usecs
827[ 21.509152] fuse init (API version 7.27)
828[ 23.341433] rfkill: input handler disabled
829[ 31.543956] [drm] PCIE gen 2 link speeds already enabled
830[ 31.555398] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
831[ 31.555543] radeon 0000:03:00.0: WB enabled
832[ 31.555547] radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0000000093613fd3
833[ 31.555548] radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0x00000000c9fefba2
834[ 31.555550] radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0x000000000ea067e7
835[ 31.555551] radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x000000004e353b46
836[ 31.555553] radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0x000000003edc5838
837[ 31.794716] [drm] ring test on 0 succeeded in 1 usecs
838[ 31.794724] [drm] ring test on 1 succeeded in 1 usecs
839[ 31.794730] [drm] ring test on 2 succeeded in 1 usecs
840[ 31.794739] [drm] ring test on 3 succeeded in 5 usecs
841[ 31.794746] [drm] ring test on 4 succeeded in 4 usecs
842[ 31.794826] [drm] ib test on ring 0 succeeded in 0 usecs
843[ 31.794868] [drm] ib test on ring 1 succeeded in 0 usecs
844[ 31.794903] [drm] ib test on ring 2 succeeded in 0 usecs
845[ 31.794920] [drm] ib test on ring 3 succeeded in 0 usecs
846[ 31.794934] [drm] ib test on ring 4 succeeded in 0 usecs
847[ 163.140766] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
848[ 164.248309] wlp2s0: authenticate with 60:f1:8a:40:08:b0
849[ 164.265540] wlp2s0: send auth to 60:f1:8a:40:08:b0 (try 1/3)
850[ 164.267530] wlp2s0: authenticated
851[ 164.270626] wlp2s0: associate with 60:f1:8a:40:08:b0 (try 1/3)
852[ 164.274981] wlp2s0: RX AssocResp from 60:f1:8a:40:08:b0 (capab=0x1431 status=0 aid=5)
853[ 164.275124] wlp2s0: associated
854[ 164.282641] ath: EEPROM regdomain: 0x8070
855[ 164.282643] ath: EEPROM indicates we should expect a country code
856[ 164.282643] ath: doing EEPROM country->regdmn map search
857[ 164.282645] ath: country maps to regdmn code: 0x37
858[ 164.282646] ath: Country alpha2 being used: BY
859[ 164.282646] ath: Regpair used: 0x37
860[ 164.282648] ath: regdomain 0x8070 dynamically updated by country element
861[ 164.323274] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
862[ 164.339596] wlp2s0: Limiting TX power to 18 (18 - 0) dBm as advertised by 60:f1:8a:40:08:b0