· 5 years ago · Jun 06, 2020, 02:36 PM
1[karl@power9 ~]$ dmesg
2[ 0.000000] dt-cpu-ftrs: setup for ISA 3000
3[ 0.000000] dt-cpu-ftrs: not enabling: system-call-vectored (disabled or unsupported by kernel)
4[ 0.000000] dt-cpu-ftrs: final cpu/mmu features = 0x0001f86f8f5fb1a7 0x3c006041
5[ 0.000000] radix-mmu: Page sizes from device-tree:
6[ 0.000000] radix-mmu: Page size shift = 12 AP=0x0
7[ 0.000000] radix-mmu: Page size shift = 16 AP=0x5
8[ 0.000000] radix-mmu: Page size shift = 21 AP=0x1
9[ 0.000000] radix-mmu: Page size shift = 30 AP=0x2
10[ 0.000000] radix-mmu: Activating Kernel Userspace Execution Prevention
11[ 0.000000] radix-mmu: Activating Kernel Userspace Access Prevention
12[ 0.000000] radix-mmu: Mapped 0x0000000000000000-0x0000000040000000 with 1.00 GiB pages (exec)
13[ 0.000000] radix-mmu: Mapped 0x0000000040000000-0x0000001000000000 with 1.00 GiB pages
14[ 0.000000] radix-mmu: Initializing Radix MMU
15[ 0.000000] Linux version 5.4.0-2.fc32.ppc64le (root@06f77e0eef0542b6a967df7957ec1f62) (gcc version 9.2.1 20190827 (Red Hat 9.2.1-1) (GCC)) #1 SMP Sat Dec 7 18:10:27 EST 2019
16[ 0.000000] Found initrd at 0xc000000004360000:0xc0000000061ec556
17[ 0.000000] OPAL: Found memory mapped LPC bus on chip 0
18[ 0.000000] ISA: Non-PCI bridge is /lpcm-opb@6030000000000/lpc@0
19[ 0.000000] Using PowerNV machine description
20[ 0.000000] printk: bootconsole [udbg0] enabled
21[ 0.000000] CPU maps initialized for 4 threads per core
22[ 0.000000] (thread shift is 2)
23[ 0.000000] Allocated 4736 bytes for 16 pacas
24[ 0.000000] -----------------------------------------------------
25[ 0.000000] phys_mem_size = 0x1000000000
26[ 0.000000] dcache_bsize = 0x80
27[ 0.000000] icache_bsize = 0x80
28[ 0.000000] cpu_features = 0x0001f86f8f5fb1a7
29[ 0.000000] possible = 0x0001fbffcf5fb1a7
30[ 0.000000] always = 0x00000003800081a1
31[ 0.000000] cpu_user_features = 0xdc0065c2 0xaee00000
32[ 0.000000] mmu_features = 0xbc006041
33[ 0.000000] firmware_features = 0x0000000110000000
34[ 0.000000] vmalloc start = 0xc008000000000000
35[ 0.000000] IO start = 0xc00a000000000000
36[ 0.000000] vmemmap start = 0xc00c000000000000
37[ 0.000000] -----------------------------------------------------
38[ 0.000000] cma: Reserved 3280 MiB at 0x0000000f2f000000
39[ 0.000000] numa: NODE_DATA [mem 0xfff5def80-0xfff5e3fff]
40[ 0.000000] rfi-flush: mttrig type flush available
41[ 0.000000] rfi-flush: patched 8 locations (mttrig type flush)
42[ 0.000000] count-cache-flush: software flush disabled.
43[ 0.000000] stf-barrier: eieio barrier available
44[ 0.000000] stf-barrier: patched 59 entry locations (eieio barrier)
45[ 0.000000] stf-barrier: patched 8 exit locations (eieio barrier)
46[ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0000000)
47[ 0.000000] PCI host bridge /pciex@600c3c0000000 (primary) ranges:
48[ 0.000000] MEM 0x000600c000000000..0x000600c07ffeffff -> 0x0000000080000000
49[ 0.000000] MEM 0x0006000000000000..0x0006003fffffffff -> 0x0006000000000000 (M64 #1..31)
50[ 0.000000] Using M64 #31 as default window
51[ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000]
52[ 0.000000] M64: 0x4000000000 [segment=0x20000000]
53[ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0xfe000)
54[ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0100000)
55[ 0.000000] PCI host bridge /pciex@600c3c0100000 ranges:
56[ 0.000000] MEM 0x000600c080000000..0x000600c0fffeffff -> 0x0000000080000000
57[ 0.000000] MEM 0x0006004000000000..0x0006007fffffffff -> 0x0006004000000000 (M64 #1..15)
58[ 0.000000] Using M64 #15 as default window
59[ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000]
60[ 0.000000] M64: 0x4000000000 [segment=0x40000000]
61[ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfd800)
62[ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0200000)
63[ 0.000000] PCI host bridge /pciex@600c3c0200000 ranges:
64[ 0.000000] MEM 0x000600c100000000..0x000600c17ffeffff -> 0x0000000080000000
65[ 0.000000] MEM 0x0006008000000000..0x000600bfffffffff -> 0x0006008000000000 (M64 #1..15)
66[ 0.000000] Using M64 #15 as default window
67[ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000]
68[ 0.000000] M64: 0x4000000000 [segment=0x40000000]
69[ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfd000)
70[ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0300000)
71[ 0.000000] PCI host bridge /pciex@600c3c0300000 ranges:
72[ 0.000000] MEM 0x000600c180000000..0x000600c1fffeffff -> 0x0000000080000000
73[ 0.000000] MEM 0x0006020000000000..0x0006023fffffffff -> 0x0006020000000000 (M64 #1..31)
74[ 0.000000] Using M64 #31 as default window
75[ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000]
76[ 0.000000] M64: 0x4000000000 [segment=0x20000000]
77[ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0xfc000)
78[ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0400000)
79[ 0.000000] PCI host bridge /pciex@600c3c0400000 ranges:
80[ 0.000000] MEM 0x000600c200000000..0x000600c27ffeffff -> 0x0000000080000000
81[ 0.000000] MEM 0x0006024000000000..0x0006027fffffffff -> 0x0006024000000000 (M64 #1..15)
82[ 0.000000] Using M64 #15 as default window
83[ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000]
84[ 0.000000] M64: 0x4000000000 [segment=0x40000000]
85[ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfb800)
86[ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0500000)
87[ 0.000000] PCI host bridge /pciex@600c3c0500000 ranges:
88[ 0.000000] MEM 0x000600c280000000..0x000600c2fffeffff -> 0x0000000080000000
89[ 0.000000] MEM 0x0006028000000000..0x000602bfffffffff -> 0x0006028000000000 (M64 #1..15)
90[ 0.000000] Using M64 #15 as default window
91[ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000]
92[ 0.000000] M64: 0x4000000000 [segment=0x40000000]
93[ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfb000)
94[ 0.000000] OPAL nvram setup, 589824 bytes
95[ 0.000000] barrier-nospec: using ORI speculation barrier
96[ 0.000000] barrier-nospec: patched 565 locations
97[ 0.000000] Top of RAM: 0x1000000000, Total RAM: 0x1000000000
98[ 0.000000] Memory hole size: 0MB
99[ 0.000000] Zone ranges:
100[ 0.000000] Normal [mem 0x0000000000000000-0x0000000fffffffff]
101[ 0.000000] Movable zone start for each node
102[ 0.000000] Early memory node ranges
103[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000fffffffff]
104[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000fffffffff]
105[ 0.000000] On node 0 totalpages: 1048576
106[ 0.000000] Normal zone: 1024 pages used for memmap
107[ 0.000000] Normal zone: 0 pages reserved
108[ 0.000000] Normal zone: 1048576 pages, LIFO batch:3
109[ 0.000000] percpu: Embedded 11 pages/cpu s622872 r0 d98024 u720896
110[ 0.000000] pcpu-alloc: s622872 r0 d98024 u720896 alloc=11*65536
111[ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
112[ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
113[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1047552
114[ 0.000000] Policy zone: Normal
115[ 0.000000] Kernel command line: root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet
116[ 0.000000] Dentry cache hash table entries: 8388608 (order: 10, 67108864 bytes, linear)
117[ 0.000000] Inode-cache hash table entries: 4194304 (order: 9, 33554432 bytes, linear)
118[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
119[ 0.000000] Memory: 63330880K/67108864K available (16000K kernel code, 3776K rwdata, 3968K rodata, 5504K init, 1747K bss, 419264K reserved, 3358720K cma-reserved)
120[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x58/0x9e0 with crng_init=0
121[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
122[ 0.000000] ftrace: allocating 32172 entries in 12 pages
123[ 0.000000] rcu: Hierarchical RCU implementation.
124[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=16.
125[ 0.000000] Tasks RCU enabled.
126[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
127[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
128[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
129[ 0.000000] xive: Interrupt handling initialized with native backend
130[ 0.000000] xive: Using priority 7 for all interrupts
131[ 0.000000] xive: Using 64kB queues
132[ 0.000000] time_init: decrementer frequency = 512.000000 MHz
133[ 0.000000] time_init: processor frequency = 2700.000000 MHz
134[ 0.000003] time_init: 56 bit decrementer (max: 7fffffffffffff)
135[ 0.000005] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns
136[ 0.000007] clocksource: timebase mult[1f40000] shift[24] registered
137[ 0.000012] clockevent: decrementer mult[83126f] shift[24] cpu[0]
138[ 0.000072] Console: colour dummy device 80x25
139[ 0.000075] printk: console [hvc0] enabled
140[ 0.000076] printk: bootconsole [udbg0] disabled
141[ 0.000125] pid_max: default: 32768 minimum: 301
142[ 0.000288] LSM: Security Framework initializing
143[ 0.000388] Yama: becoming mindful.
144[ 0.000409] SELinux: Initializing.
145[ 0.000570] *** VALIDATE SELinux ***
146[ 0.000644] Mount-cache hash table entries: 131072 (order: 4, 1048576 bytes, linear)
147[ 0.000688] Mountpoint-cache hash table entries: 131072 (order: 4, 1048576 bytes, linear)
148[ 0.000746] *** VALIDATE tmpfs ***
149[ 0.001035] *** VALIDATE proc ***
150[ 0.001117] *** VALIDATE cgroup1 ***
151[ 0.001119] *** VALIDATE cgroup2 ***
152[ 0.001433] EEH: PowerNV platform initialized
153[ 0.001436] POWER9 performance monitor hardware support registered
154[ 0.001471] rcu: Hierarchical SRCU implementation.
155[ 0.002333] smp: Bringing up secondary CPUs ...
156[ 0.007310] smp: Brought up 1 node, 16 CPUs
157[ 0.007312] numa: Node 0 CPUs: 0-15
158[ 0.007315] Using standard scheduler topology
159[ 0.008495] devtmpfs: initialized
160[ 0.028492] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
161[ 0.028497] futex hash table entries: 4096 (order: 3, 524288 bytes, linear)
162[ 0.030513] NET: Registered protocol family 16
163[ 0.030799] audit: initializing netlink subsys (disabled)
164[ 0.030878] audit: type=2000 audit(1563028753.030:1): state=initialized audit_enabled=0 res=1
165[ 0.031003] cpuidle: using governor menu
166[ 0.031105] pstore: Registered nvram as persistent store backend
167[ 0.042832] PCI: Probing PCI hardware
168[ 0.042883] PCI host bridge to bus 0000:00
169[ 0.042890] pci_bus 0000:00: root bus resource [mem 0x600c000000000-0x600c07ffeffff] (bus address [0x80000000-0xfffeffff])
170[ 0.042894] pci_bus 0000:00: root bus resource [mem 0x6000000000000-0x6003fbfffffff 64bit pref]
171[ 0.042897] pci_bus 0000:00: root bus resource [bus 00-ff]
172[ 0.042901] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
173[ 0.042936] pci 0000:00:00.0: [1014:04c1] type 01 class 0x060400
174[ 0.043149] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
175[ 0.045796] pci 0000:01:00.0: [1002:1478] type 01 class 0x060400
176[ 0.045865] pci 0000:01:00.0: reg 0x10: [mem 0x600c000400000-0x600c000403fff]
177[ 0.045955] pci 0000:01:00.0: BAR0 [mem size 0x00004000]: requesting alignment to 0x10000
178[ 0.046131] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
179[ 0.048695] pci 0000:00:00.0: PCI bridge to [bus 01-03]
180[ 0.048861] pci 0000:02:00.0: [1002:1479] type 01 class 0x060400
181[ 0.049164] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
182[ 0.051707] pci 0000:01:00.0: PCI bridge to [bus 02-03]
183[ 0.051863] pci 0000:03:00.0: [1002:7340] type 00 class 0x030000
184[ 0.051945] pci 0000:03:00.0: reg 0x10: [mem 0x6000000000000-0x600000fffffff 64bit pref]
185[ 0.051968] pci 0000:03:00.0: reg 0x18: [mem 0x6000010000000-0x60000101fffff 64bit pref]
186[ 0.051983] pci 0000:03:00.0: reg 0x20: [io 0x0000-0x00ff]
187[ 0.051997] pci 0000:03:00.0: reg 0x24: [mem 0x600c000000000-0x600c00007ffff]
188[ 0.052012] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
189[ 0.052248] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
190[ 0.052340] pci 0000:03:00.0: 126.024 Gb/s available PCIe bandwidth, limited by 16 GT/s x8 link at 0000:00:00.0 (capable of 252.048 Gb/s with 16 GT/s x16 link)
191[ 0.052446] pci 0000:03:00.1: [1002:ab38] type 00 class 0x040300
192[ 0.052498] pci 0000:03:00.1: reg 0x10: [mem 0x600c0000a0000-0x600c0000a3fff]
193[ 0.052619] pci 0000:03:00.1: BAR0 [mem size 0x00004000]: requesting alignment to 0x10000
194[ 0.052738] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
195[ 0.055232] pci 0000:02:00.0: PCI bridge to [bus 03]
196[ 0.055331] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03
197[ 0.055376] PCI host bridge to bus 0001:00
198[ 0.055381] pci_bus 0001:00: root bus resource [mem 0x600c080000000-0x600c0fffeffff] (bus address [0x80000000-0xfffeffff])
199[ 0.055384] pci_bus 0001:00: root bus resource [mem 0x6004000000000-0x6007f7fffffff 64bit pref]
200[ 0.055387] pci_bus 0001:00: root bus resource [bus 00-ff]
201[ 0.055390] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
202[ 0.055416] pci 0001:00:00.0: [1014:04c1] type 01 class 0x060400
203[ 0.055619] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
204[ 0.058239] pci 0001:01:00.0: [144d:a808] type 00 class 0x010802
205[ 0.058307] pci 0001:01:00.0: reg 0x10: [mem 0x600c080000000-0x600c080003fff 64bit]
206[ 0.058415] pci 0001:01:00.0: BAR0 [mem size 0x00004000 64bit]: requesting alignment to 0x10000
207[ 0.061090] pci 0001:00:00.0: PCI bridge to [bus 01]
208[ 0.061151] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
209[ 0.061195] PCI host bridge to bus 0002:00
210[ 0.061199] pci_bus 0002:00: root bus resource [mem 0x600c100000000-0x600c17ffeffff] (bus address [0x80000000-0xfffeffff])
211[ 0.061202] pci_bus 0002:00: root bus resource [mem 0x6008000000000-0x600bf7fffffff 64bit pref]
212[ 0.061205] pci_bus 0002:00: root bus resource [bus 00-ff]
213[ 0.061208] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
214[ 0.061235] pci 0002:00:00.0: [1014:04c1] type 01 class 0x060400
215[ 0.061438] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
216[ 0.064050] pci 0002:01:00.0: [1b4b:9235] type 00 class 0x010601
217[ 0.064095] pci 0002:01:00.0: reg 0x10: [io 0x8000-0x8007]
218[ 0.064114] pci 0002:01:00.0: reg 0x14: [io 0x8040-0x8043]
219[ 0.064133] pci 0002:01:00.0: reg 0x18: [io 0x8100-0x8107]
220[ 0.064152] pci 0002:01:00.0: reg 0x1c: [io 0x8140-0x8143]
221[ 0.064170] pci 0002:01:00.0: reg 0x20: [io 0x800000-0x80001f]
222[ 0.064189] pci 0002:01:00.0: reg 0x24: [mem 0x600c100000000-0x600c1000007ff]
223[ 0.064208] pci 0002:01:00.0: reg 0x30: [mem 0x600c150000000-0x600c15000ffff pref]
224[ 0.064237] pci 0002:01:00.0: BAR5 [mem size 0x00000800]: requesting alignment to 0x10000
225[ 0.064335] pci 0002:01:00.0: PME# supported from D3hot
226[ 0.066842] pci 0002:00:00.0: PCI bridge to [bus 01]
227[ 0.066902] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 01
228[ 0.066947] PCI host bridge to bus 0003:00
229[ 0.066952] pci_bus 0003:00: root bus resource [mem 0x600c180000000-0x600c1fffeffff] (bus address [0x80000000-0xfffeffff])
230[ 0.066955] pci_bus 0003:00: root bus resource [mem 0x6020000000000-0x6023fbfffffff 64bit pref]
231[ 0.066958] pci_bus 0003:00: root bus resource [bus 00-ff]
232[ 0.066961] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to ff
233[ 0.066987] pci 0003:00:00.0: [1014:04c1] type 01 class 0x060400
234[ 0.067190] pci 0003:00:00.0: PME# supported from D0 D3hot D3cold
235[ 0.069803] pci 0003:01:00.0: [104c:8241] type 00 class 0x0c0330
236[ 0.069861] pci 0003:01:00.0: reg 0x10: [mem 0x600c180000000-0x600c18000ffff 64bit]
237[ 0.069890] pci 0003:01:00.0: reg 0x18: [mem 0x600c180010000-0x600c180011fff 64bit]
238[ 0.069969] pci 0003:01:00.0: BAR2 [mem size 0x00002000 64bit]: requesting alignment to 0x10000
239[ 0.070087] pci 0003:01:00.0: supports D1 D2
240[ 0.070090] pci 0003:01:00.0: PME# supported from D0 D1 D2 D3hot
241[ 0.072609] pci 0003:00:00.0: PCI bridge to [bus 01]
242[ 0.072669] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 01
243[ 0.072715] PCI host bridge to bus 0004:00
244[ 0.072719] pci_bus 0004:00: root bus resource [mem 0x600c200000000-0x600c27ffeffff] (bus address [0x80000000-0xfffeffff])
245[ 0.072722] pci_bus 0004:00: root bus resource [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
246[ 0.072725] pci_bus 0004:00: root bus resource [bus 00-ff]
247[ 0.072728] pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to ff
248[ 0.072755] pci 0004:00:00.0: [1014:04c1] type 01 class 0x060400
249[ 0.072959] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold
250[ 0.075581] pci 0004:01:00.0: [14e4:1657] type 00 class 0x020000
251[ 0.075646] pci 0004:01:00.0: reg 0x10: [mem 0x6024000000000-0x602400000ffff 64bit pref]
252[ 0.075675] pci 0004:01:00.0: reg 0x18: [mem 0x6024000010000-0x602400001ffff 64bit pref]
253[ 0.075704] pci 0004:01:00.0: reg 0x20: [mem 0x6024000020000-0x602400002ffff 64bit pref]
254[ 0.075920] pci 0004:01:00.0: PME# supported from D0 D3hot D3cold
255[ 0.075996] pci 0004:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x2 link at 0004:00:00.0 (capable of 16.000 Gb/s with 5 GT/s x4 link)
256[ 0.076098] pci 0004:01:00.1: [14e4:1657] type 00 class 0x020000
257[ 0.076164] pci 0004:01:00.1: reg 0x10: [mem 0x6024000030000-0x602400003ffff 64bit pref]
258[ 0.076193] pci 0004:01:00.1: reg 0x18: [mem 0x6024000040000-0x602400004ffff 64bit pref]
259[ 0.076223] pci 0004:01:00.1: reg 0x20: [mem 0x6024000050000-0x602400005ffff 64bit pref]
260[ 0.076440] pci 0004:01:00.1: PME# supported from D0 D3hot D3cold
261[ 0.076589] pci 0004:01:00.2: [14e4:1657] type 00 class 0x020000
262[ 0.076656] pci 0004:01:00.2: reg 0x10: [mem 0x6024000060000-0x602400006ffff 64bit pref]
263[ 0.076686] pci 0004:01:00.2: reg 0x18: [mem 0x6024000070000-0x602400007ffff 64bit pref]
264[ 0.076716] pci 0004:01:00.2: reg 0x20: [mem 0x6024000080000-0x602400008ffff 64bit pref]
265[ 0.076935] pci 0004:01:00.2: PME# supported from D0 D3hot D3cold
266[ 0.079420] pci 0004:00:00.0: PCI bridge to [bus 01]
267[ 0.079504] pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to 01
268[ 0.079550] PCI host bridge to bus 0005:00
269[ 0.079554] pci_bus 0005:00: root bus resource [mem 0x600c280000000-0x600c2fffeffff] (bus address [0x80000000-0xfffeffff])
270[ 0.079557] pci_bus 0005:00: root bus resource [mem 0x6028000000000-0x602bf7fffffff 64bit pref]
271[ 0.079560] pci_bus 0005:00: root bus resource [bus 00-ff]
272[ 0.079563] pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to ff
273[ 0.079589] pci 0005:00:00.0: [1014:04c1] type 01 class 0x060400
274[ 0.079793] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold
275[ 0.082415] pci 0005:01:00.0: [1a03:1150] type 01 class 0x060400
276[ 0.082684] pci 0005:01:00.0: supports D1 D2
277[ 0.082687] pci 0005:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
278[ 0.085190] pci 0005:00:00.0: PCI bridge to [bus 01-02]
279[ 0.085317] pci_bus 0005:02: extended config space not accessible
280[ 0.085373] pci 0005:02:00.0: [1a03:2000] type 00 class 0x030000
281[ 0.085411] pci 0005:02:00.0: reg 0x10: [mem 0x600c280000000-0x600c280ffffff]
282[ 0.085431] pci 0005:02:00.0: reg 0x14: [mem 0x600c281000000-0x600c28101ffff]
283[ 0.085452] pci 0005:02:00.0: reg 0x18: [io 0x0000-0x007f]
284[ 0.085610] pci 0005:02:00.0: supports D1 D2
285[ 0.085613] pci 0005:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.088102] pci 0005:01:00.0: PCI bridge to [bus 02]
287[ 0.088166] pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to 02
288[ 0.088185] pci 0000:00:00.0: BAR 15: assigned [mem 0x6000000000000-0x600001fffffff 64bit pref]
289[ 0.088188] pci 0000:00:00.0: BAR 14: assigned [mem 0x600c000000000-0x600c0007fffff]
290[ 0.088191] pci 0000:00:00.0: BAR 13: no space for [io size 0x1000]
291[ 0.088194] pci 0000:00:00.0: BAR 13: failed to assign [io size 0x1000]
292[ 0.088199] pci 0000:01:00.0: BAR 15: assigned [mem 0x6000000000000-0x600001fffffff 64bit pref]
293[ 0.088203] pci 0000:01:00.0: BAR 14: assigned [mem 0x600c000000000-0x600c0003fffff]
294[ 0.088206] pci 0000:01:00.0: BAR 0: assigned [mem 0x600c000400000-0x600c000403fff]
295[ 0.088215] pci 0000:01:00.0: BAR 13: no space for [io size 0x1000]
296[ 0.088217] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x1000]
297[ 0.088222] pci 0000:02:00.0: BAR 15: assigned [mem 0x6000000000000-0x600001fffffff 64bit pref]
298[ 0.088225] pci 0000:02:00.0: BAR 14: assigned [mem 0x600c000000000-0x600c0003fffff]
299[ 0.088228] pci 0000:02:00.0: BAR 13: no space for [io size 0x1000]
300[ 0.088230] pci 0000:02:00.0: BAR 13: failed to assign [io size 0x1000]
301[ 0.088235] pci 0000:03:00.0: BAR 0: assigned [mem 0x6000000000000-0x600000fffffff 64bit pref]
302[ 0.088254] pci 0000:03:00.0: BAR 2: assigned [mem 0x6000010000000-0x60000101fffff 64bit pref]
303[ 0.088273] pci 0000:03:00.0: BAR 5: assigned [mem 0x600c000000000-0x600c00007ffff]
304[ 0.088281] pci 0000:03:00.0: BAR 6: assigned [mem 0x600c000080000-0x600c00009ffff pref]
305[ 0.088284] pci 0000:03:00.1: BAR 0: assigned [mem 0x600c0000a0000-0x600c0000a3fff]
306[ 0.088291] pci 0000:03:00.0: BAR 4: no space for [io size 0x0100]
307[ 0.088294] pci 0000:03:00.0: BAR 4: failed to assign [io size 0x0100]
308[ 0.088300] pci 0000:00 : [PE# 1fe] Secondary bus 0x0000000000000000 associated with PE#1fe
309[ 0.088556] pci 0000:03 : [PE# 00] Secondary bus 0x0000000000000003 associated with PE#0
310[ 0.088809] pci 0000:03 : [PE# 00] Setting up 32-bit TCE table at 0..80000000
311[ 0.089774] IOMMU table initialized, virtual merging enabled
312[ 0.089778] pci 0000:03 : [PE# 00] Setting up window#0 0..fffffffff pg=10000
313[ 0.089785] pci 0000:03 : [PE# 00] Enabling 64-bit DMA bypass
314[ 0.089790] pci 0000:02:00.0: PCI bridge to [bus 03]
315[ 0.089799] pci 0000:02:00.0: bridge window [mem 0x600c000000000-0x600c0003fffff]
316[ 0.089806] pci 0000:02:00.0: bridge window [mem 0x6000000000000-0x600001fffffff 64bit pref]
317[ 0.089820] pci 0000:02 : [PE# 1fd] Secondary bus 0x0000000000000002 associated with PE#1fd
318[ 0.090067] pci 0000:01:00.0: PCI bridge to [bus 02-03]
319[ 0.090076] pci 0000:01:00.0: bridge window [mem 0x600c000000000-0x600c07fefffff]
320[ 0.090083] pci 0000:01:00.0: bridge window [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
321[ 0.090097] pci 0000:01 : [PE# 1fc] Secondary bus 0x0000000000000001 associated with PE#1fc
322[ 0.090350] pci 0000:00:00.0: PCI bridge to [bus 01-03]
323[ 0.090359] pci 0000:00:00.0: bridge window [mem 0x600c000000000-0x600c07fefffff]
324[ 0.090365] pci 0000:00:00.0: bridge window [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
325[ 0.090376] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
326[ 0.090379] pci_bus 0000:00: resource 4 [mem 0x600c000000000-0x600c07ffeffff]
327[ 0.090382] pci_bus 0000:00: resource 5 [mem 0x6000000000000-0x6003fbfffffff 64bit pref]
328[ 0.090385] pci_bus 0000:01: resource 1 [mem 0x600c000000000-0x600c07fefffff]
329[ 0.090388] pci_bus 0000:01: resource 2 [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
330[ 0.090391] pci_bus 0000:02: resource 1 [mem 0x600c000000000-0x600c07fefffff]
331[ 0.090393] pci_bus 0000:02: resource 2 [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
332[ 0.090396] pci_bus 0000:03: resource 1 [mem 0x600c000000000-0x600c0003fffff]
333[ 0.090399] pci_bus 0000:03: resource 2 [mem 0x6000000000000-0x600001fffffff 64bit pref]
334[ 0.090405] pci 0001:00:00.0: BAR 14: assigned [mem 0x600c080000000-0x600c0807fffff]
335[ 0.090409] pci 0001:01:00.0: BAR 0: assigned [mem 0x600c080000000-0x600c080003fff 64bit]
336[ 0.090429] pci 0001:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe
337[ 0.090678] pci 0001:01 : [PE# fd] Secondary bus 0x0000000000000001 associated with PE#fd
338[ 0.090927] pci 0001:01 : [PE# fd] Setting up 32-bit TCE table at 0..80000000
339[ 0.091889] pci 0001:01 : [PE# fd] Setting up window#0 0..fffffffff pg=10000
340[ 0.091894] pci 0001:01 : [PE# fd] Enabling 64-bit DMA bypass
341[ 0.091898] pci 0001:00:00.0: PCI bridge to [bus 01]
342[ 0.091907] pci 0001:00:00.0: bridge window [mem 0x600c080000000-0x600c0ffefffff]
343[ 0.091921] pci_bus 0001:00: resource 4 [mem 0x600c080000000-0x600c0fffeffff]
344[ 0.091924] pci_bus 0001:00: resource 5 [mem 0x6004000000000-0x6007f7fffffff 64bit pref]
345[ 0.091927] pci_bus 0001:01: resource 1 [mem 0x600c080000000-0x600c0ffefffff]
346[ 0.091932] pci 0002:00:00.0: BAR 14: assigned [mem 0x600c100000000-0x600c1007fffff]
347[ 0.091935] pci 0002:00:00.0: BAR 13: no space for [io size 0x1000]
348[ 0.091938] pci 0002:00:00.0: BAR 13: failed to assign [io size 0x1000]
349[ 0.091942] pci 0002:01:00.0: BAR 5: assigned [mem 0x600c100000000-0x600c1000007ff]
350[ 0.091951] pci 0002:01:00.0: BAR 6: assigned [mem 0x600c100010000-0x600c10001ffff pref]
351[ 0.091954] pci 0002:01:00.0: BAR 4: no space for [io size 0x0020]
352[ 0.091956] pci 0002:01:00.0: BAR 4: failed to assign [io size 0x0020]
353[ 0.091959] pci 0002:01:00.0: BAR 0: no space for [io size 0x0008]
354[ 0.091962] pci 0002:01:00.0: BAR 0: failed to assign [io size 0x0008]
355[ 0.091964] pci 0002:01:00.0: BAR 2: no space for [io size 0x0008]
356[ 0.091967] pci 0002:01:00.0: BAR 2: failed to assign [io size 0x0008]
357[ 0.091970] pci 0002:01:00.0: BAR 1: no space for [io size 0x0004]
358[ 0.091972] pci 0002:01:00.0: BAR 1: failed to assign [io size 0x0004]
359[ 0.091975] pci 0002:01:00.0: BAR 3: no space for [io size 0x0004]
360[ 0.091977] pci 0002:01:00.0: BAR 3: failed to assign [io size 0x0004]
361[ 0.091981] pci 0002:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe
362[ 0.092232] pci 0002:01 : [PE# fd] Secondary bus 0x0000000000000001 associated with PE#fd
363[ 0.092481] pci 0002:01 : [PE# fd] Setting up 32-bit TCE table at 0..80000000
364[ 0.093447] pci 0002:01 : [PE# fd] Setting up window#0 0..fffffffff pg=10000
365[ 0.093452] pci 0002:01 : [PE# fd] Enabling 64-bit DMA bypass
366[ 0.093456] pci 0002:00:00.0: PCI bridge to [bus 01]
367[ 0.093464] pci 0002:00:00.0: bridge window [mem 0x600c100000000-0x600c17fefffff]
368[ 0.093478] pci_bus 0002:00: Some PCI device resources are unassigned, try booting with pci=realloc
369[ 0.093481] pci_bus 0002:00: resource 4 [mem 0x600c100000000-0x600c17ffeffff]
370[ 0.093484] pci_bus 0002:00: resource 5 [mem 0x6008000000000-0x600bf7fffffff 64bit pref]
371[ 0.093487] pci_bus 0002:01: resource 1 [mem 0x600c100000000-0x600c17fefffff]
372[ 0.093492] pci 0003:00:00.0: BAR 14: assigned [mem 0x600c180000000-0x600c1803fffff]
373[ 0.093497] pci 0003:01:00.0: BAR 0: assigned [mem 0x600c180000000-0x600c18000ffff 64bit]
374[ 0.093517] pci 0003:01:00.0: BAR 2: assigned [mem 0x600c180010000-0x600c180011fff 64bit]
375[ 0.093537] pci 0003:00 : [PE# 1fe] Secondary bus 0x0000000000000000 associated with PE#1fe
376[ 0.093788] pci 0003:01 : [PE# 1fd] Secondary bus 0x0000000000000001 associated with PE#1fd
377[ 0.094038] pci 0003:01 : [PE# 1fd] Setting up 32-bit TCE table at 0..80000000
378[ 0.095001] pci 0003:01 : [PE# 1fd] Setting up window#0 0..fffffffff pg=10000
379[ 0.095007] pci 0003:01 : [PE# 1fd] Enabling 64-bit DMA bypass
380[ 0.095010] pci 0003:00:00.0: PCI bridge to [bus 01]
381[ 0.095019] pci 0003:00:00.0: bridge window [mem 0x600c180000000-0x600c1ffefffff]
382[ 0.095033] pci_bus 0003:00: resource 4 [mem 0x600c180000000-0x600c1fffeffff]
383[ 0.095036] pci_bus 0003:00: resource 5 [mem 0x6020000000000-0x6023fbfffffff 64bit pref]
384[ 0.095039] pci_bus 0003:01: resource 1 [mem 0x600c180000000-0x600c1ffefffff]
385[ 0.095045] pci 0004:00:00.0: BAR 15: assigned [mem 0x6024000000000-0x602403fffffff 64bit pref]
386[ 0.095051] pci 0004:01:00.0: BAR 0: assigned [mem 0x6024000000000-0x602400000ffff 64bit pref]
387[ 0.095071] pci 0004:01:00.0: BAR 2: assigned [mem 0x6024000010000-0x602400001ffff 64bit pref]
388[ 0.095091] pci 0004:01:00.0: BAR 4: assigned [mem 0x6024000020000-0x602400002ffff 64bit pref]
389[ 0.095111] pci 0004:01:00.1: BAR 0: assigned [mem 0x6024000030000-0x602400003ffff 64bit pref]
390[ 0.095131] pci 0004:01:00.1: BAR 2: assigned [mem 0x6024000040000-0x602400004ffff 64bit pref]
391[ 0.095151] pci 0004:01:00.1: BAR 4: assigned [mem 0x6024000050000-0x602400005ffff 64bit pref]
392[ 0.095171] pci 0004:01:00.2: BAR 0: assigned [mem 0x6024000060000-0x602400006ffff 64bit pref]
393[ 0.095192] pci 0004:01:00.2: BAR 2: assigned [mem 0x6024000070000-0x602400007ffff 64bit pref]
394[ 0.095212] pci 0004:01:00.2: BAR 4: assigned [mem 0x6024000080000-0x602400008ffff 64bit pref]
395[ 0.095233] pci 0004:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe
396[ 0.095498] pci 0004:01 : [PE# 00] Secondary bus 0x0000000000000001 associated with PE#0
397[ 0.095747] pci 0004:01 : [PE# 00] Setting up 32-bit TCE table at 0..80000000
398[ 0.096708] pci 0004:01 : [PE# 00] Setting up window#0 0..fffffffff pg=10000
399[ 0.096713] pci 0004:01 : [PE# 00] Enabling 64-bit DMA bypass
400[ 0.096716] pci 0004:00:00.0: PCI bridge to [bus 01]
401[ 0.096729] pci 0004:00:00.0: bridge window [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
402[ 0.096739] pci_bus 0004:00: resource 4 [mem 0x600c200000000-0x600c27ffeffff]
403[ 0.096742] pci_bus 0004:00: resource 5 [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
404[ 0.096745] pci_bus 0004:01: resource 2 [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
405[ 0.096751] pci 0005:00:00.0: BAR 14: assigned [mem 0x600c280000000-0x600c2817fffff]
406[ 0.096754] pci 0005:00:00.0: BAR 13: no space for [io size 0x1000]
407[ 0.096757] pci 0005:00:00.0: BAR 13: failed to assign [io size 0x1000]
408[ 0.096761] pci 0005:01:00.0: BAR 14: assigned [mem 0x600c280000000-0x600c2817fffff]
409[ 0.096764] pci 0005:01:00.0: BAR 13: no space for [io size 0x1000]
410[ 0.096766] pci 0005:01:00.0: BAR 13: failed to assign [io size 0x1000]
411[ 0.096770] pci 0005:02:00.0: BAR 0: assigned [mem 0x600c280000000-0x600c280ffffff]
412[ 0.096779] pci 0005:02:00.0: BAR 1: assigned [mem 0x600c281000000-0x600c28101ffff]
413[ 0.096787] pci 0005:02:00.0: BAR 2: no space for [io size 0x0080]
414[ 0.096789] pci 0005:02:00.0: BAR 2: failed to assign [io size 0x0080]
415[ 0.096793] pci 0005:00 : [PE# fe] Secondary bus 0x0000000000000000 associated with PE#fe
416[ 0.097043] pci 0005:02 : [PE# fd] Secondary bus 0x0000000000000002..0x0000000000000002 associated with PE#fd
417[ 0.097294] pci 0005:02 : [PE# fd] Setting up 32-bit TCE table at 0..80000000
418[ 0.098259] pci 0005:02 : [PE# fd] Setting up window#0 0..fffffffff pg=10000
419[ 0.098264] pci 0005:02 : [PE# fd] Enabling 64-bit DMA bypass
420[ 0.098267] pci 0005:01:00.0: PCI bridge to [bus 02]
421[ 0.098276] pci 0005:01:00.0: bridge window [mem 0x600c280000000-0x600c2ffefffff]
422[ 0.098294] pci 0005:01 : [PE# fc] Secondary bus 0x0000000000000001 associated with PE#fc
423[ 0.098541] pci 0005:00:00.0: PCI bridge to [bus 01-02]
424[ 0.098550] pci 0005:00:00.0: bridge window [mem 0x600c280000000-0x600c2ffefffff]
425[ 0.098563] pci_bus 0005:00: Some PCI device resources are unassigned, try booting with pci=realloc
426[ 0.098566] pci_bus 0005:00: resource 4 [mem 0x600c280000000-0x600c2fffeffff]
427[ 0.098569] pci_bus 0005:00: resource 5 [mem 0x6028000000000-0x602bf7fffffff 64bit pref]
428[ 0.098572] pci_bus 0005:01: resource 1 [mem 0x600c280000000-0x600c2ffefffff]
429[ 0.098575] pci_bus 0005:02: resource 1 [mem 0x600c280000000-0x600c2ffefffff]
430[ 0.099715] pci 0000:03:00.0: Adding to iommu group 0
431[ 0.099721] pci 0000:03:00.1: Adding to iommu group 0
432[ 0.099735] pci 0001:01:00.0: Adding to iommu group 1
433[ 0.099749] pci 0002:01:00.0: Adding to iommu group 2
434[ 0.099762] pci 0003:01:00.0: Adding to iommu group 3
435[ 0.099776] pci 0004:01:00.0: Adding to iommu group 4
436[ 0.099781] pci 0004:01:00.1: Adding to iommu group 4
437[ 0.099786] pci 0004:01:00.2: Adding to iommu group 4
438[ 0.099800] pci 0005:02:00.0: Adding to iommu group 5
439[ 0.099843] pci 0000:00:00.0: enabling device (0101 -> 0103)
440[ 0.099860] pci 0000:01:00.0: enabling device (0141 -> 0143)
441[ 0.099880] pci 0000:02:00.0: enabling device (0141 -> 0143)
442[ 0.099898] pci 0001:00:00.0: enabling device (0101 -> 0103)
443[ 0.099913] pci 0002:00:00.0: enabling device (0101 -> 0103)
444[ 0.099928] pci 0003:00:00.0: enabling device (0101 -> 0103)
445[ 0.099943] pci 0004:00:00.0: enabling device (0101 -> 0103)
446[ 0.099959] pci 0005:00:00.0: enabling device (0101 -> 0103)
447[ 0.099975] pci 0005:01:00.0: enabling device (0141 -> 0143)
448[ 0.099989] EEH: Capable adapter found: recovery enabled.
449[ 0.100067] PCI: Probing PCI hardware done
450[ 0.101269] cpuidle-powernv: Default stop: psscr = 0x0000000000000330,mask=0x00000000003003ff
451[ 0.101271] cpuidle-powernv: Deepest stop: psscr = 0x0000000000300375,mask=0x00000000003003ff
452[ 0.101272] cpuidle-powernv: First stop level that may lose SPRs = 0x4
453[ 0.101273] cpuidle-powernv: First stop level that may lose timebase = 0x10
454[ 0.104909] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
455[ 0.104911] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
456[ 0.358129] alg: No test for 842 (842-generic)
457[ 0.358197] alg: No test for 842 (842-scomp)
458[ 0.363328] iommu: Default domain type: Translated
459[ 0.363394] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
460[ 0.363408] pci 0005:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
461[ 0.363411] pci 0000:03:00.0: vgaarb: bridge control possible
462[ 0.363412] pci 0005:02:00.0: vgaarb: bridge control possible
463[ 0.363417] pci 0005:02:00.0: vgaarb: setting as boot device (VGA legacy resources not available)
464[ 0.363418] vgaarb: loaded
465[ 0.363544] SCSI subsystem initialized
466[ 0.363604] libata version 3.00 loaded.
467[ 0.363663] usbcore: registered new interface driver usbfs
468[ 0.363677] usbcore: registered new interface driver hub
469[ 0.363723] usbcore: registered new device driver usb
470[ 0.363765] pps_core: LinuxPPS API ver. 1 registered
471[ 0.363766] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
472[ 0.363770] PTP clock support registered
473[ 0.363847] EDAC MC: Ver: 3.0.0
474[ 0.364188] NetLabel: Initializing
475[ 0.364189] NetLabel: domain hash size = 128
476[ 0.364190] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
477[ 0.364209] NetLabel: unlabeled traffic allowed by default
478[ 0.364411] clocksource: Switched to clocksource timebase
479[ 0.389593] *** VALIDATE bpf ***
480[ 0.389712] VFS: Disk quotas dquot_6.6.0
481[ 0.389760] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
482[ 0.389789] *** VALIDATE ramfs ***
483[ 0.389796] *** VALIDATE hugetlbfs ***
484[ 0.392164] thermal_sys: Registered thermal governor 'fair_share'
485[ 0.392166] thermal_sys: Registered thermal governor 'step_wise'
486[ 0.392290] NET: Registered protocol family 2
487[ 0.392479] tcp_listen_portaddr_hash hash table entries: 32768 (order: 3, 524288 bytes, linear)
488[ 0.392620] TCP established hash table entries: 524288 (order: 6, 4194304 bytes, linear)
489[ 0.393894] TCP bind hash table entries: 65536 (order: 4, 1048576 bytes, linear)
490[ 0.394081] TCP: Hash tables configured (established 524288 bind 65536)
491[ 0.394129] UDP hash table entries: 32768 (order: 4, 1048576 bytes, linear)
492[ 0.394390] UDP-Lite hash table entries: 32768 (order: 4, 1048576 bytes, linear)
493[ 0.394737] NET: Registered protocol family 1
494[ 0.394745] NET: Registered protocol family 44
495[ 0.394772] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
496[ 0.394805] pci 0003:01:00.0: enabling device (0140 -> 0142)
497[ 0.394923] PCI: CLS 0 bytes, default 128
498[ 0.394983] Trying to unpack rootfs image as initramfs...
499[ 1.157634] Freeing initrd memory: 31232K
500[ 1.157936] rtas_flash: no firmware flash support
501[ 1.158377] debugfs: Directory 'imc' with parent 'powerpc' already present!
502[ 1.158411] debugfs: Directory 'imc' with parent 'powerpc' already present!
503[ 1.158444] debugfs: Directory 'imc' with parent 'powerpc' already present!
504[ 1.158475] debugfs: Directory 'imc' with parent 'powerpc' already present!
505[ 1.158507] debugfs: Directory 'imc' with parent 'powerpc' already present!
506[ 1.158538] debugfs: Directory 'imc' with parent 'powerpc' already present!
507[ 1.158565] debugfs: Directory 'imc' with parent 'powerpc' already present!
508[ 1.158591] debugfs: Directory 'imc' with parent 'powerpc' already present!
509[ 1.158617] debugfs: Directory 'imc' with parent 'powerpc' already present!
510[ 1.158642] debugfs: Directory 'imc' with parent 'powerpc' already present!
511[ 1.158668] debugfs: Directory 'imc' with parent 'powerpc' already present!
512[ 1.158694] debugfs: Directory 'imc' with parent 'powerpc' already present!
513[ 1.158720] debugfs: Directory 'imc' with parent 'powerpc' already present!
514[ 1.159610] debugfs: Directory 'imc' with parent 'powerpc' already present!
515[ 1.159629] debugfs: Directory 'imc' with parent 'powerpc' already present!
516[ 1.159647] debugfs: Directory 'imc' with parent 'powerpc' already present!
517[ 1.159665] debugfs: Directory 'imc' with parent 'powerpc' already present!
518[ 1.159682] debugfs: Directory 'imc' with parent 'powerpc' already present!
519[ 1.159700] debugfs: Directory 'imc' with parent 'powerpc' already present!
520[ 1.159718] debugfs: Directory 'imc' with parent 'powerpc' already present!
521[ 1.159736] debugfs: Directory 'imc' with parent 'powerpc' already present!
522[ 1.159753] debugfs: Directory 'imc' with parent 'powerpc' already present!
523[ 1.159782] debugfs: Directory 'imc' with parent 'powerpc' already present!
524[ 1.159822] debugfs: Directory 'imc' with parent 'powerpc' already present!
525[ 1.159885] debugfs: Directory 'imc' with parent 'powerpc' already present!
526[ 1.159937] debugfs: Directory 'imc' with parent 'powerpc' already present!
527[ 1.159987] debugfs: Directory 'imc' with parent 'powerpc' already present!
528[ 1.160039] debugfs: Directory 'imc' with parent 'powerpc' already present!
529[ 1.160090] debugfs: Directory 'imc' with parent 'powerpc' already present!
530[ 1.160141] debugfs: Directory 'imc' with parent 'powerpc' already present!
531[ 1.160172] debugfs: Directory 'imc' with parent 'powerpc' already present!
532[ 1.160193] debugfs: Directory 'imc' with parent 'powerpc' already present!
533[ 1.160214] debugfs: Directory 'imc' with parent 'powerpc' already present!
534[ 1.160236] debugfs: Directory 'imc' with parent 'powerpc' already present!
535[ 1.160257] debugfs: Directory 'imc' with parent 'powerpc' already present!
536[ 1.160278] debugfs: Directory 'imc' with parent 'powerpc' already present!
537[ 1.160299] debugfs: Directory 'imc' with parent 'powerpc' already present!
538[ 1.161555] debugfs: Directory 'imc' with parent 'powerpc' already present!
539[ 1.161593] debugfs: Directory 'imc' with parent 'powerpc' already present!
540[ 1.161631] debugfs: Directory 'imc' with parent 'powerpc' already present!
541[ 1.165431] Initialise system trusted keyrings
542[ 1.165450] Key type blacklist registered
543[ 1.165496] workingset: timestamp_bits=38 max_order=20 bucket_order=0
544[ 1.168331] zbud: loaded
545[ 1.181629] NET: Registered protocol family 38
546[ 1.181632] Key type asymmetric registered
547[ 1.181634] Asymmetric key parser 'x509' registered
548[ 1.181645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
549[ 1.181714] io scheduler mq-deadline registered
550[ 1.181716] io scheduler kyber registered
551[ 1.181771] io scheduler bfq registered
552[ 1.181964] atomic64_test: passed
553[ 1.182279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
554[ 1.182407] pci 0005:02:00.0: enabling device (0141 -> 0143)
555[ 1.182419] Using unsupported 1024x768 (null) at 600c280010000, depth=32, pitch=4096
556[ 1.182490] fbcon: Deferring console take-over
557[ 1.182493] fb0: Open Firmware frame buffer device on /pciex@600c3c0500000/pci@0/pci@0/vga@0
558[ 1.182623] hvc0: raw protocol on /ibm,opal/consoles/serial@0 (boot console)
559[ 1.182627] hvc0: No interrupts property, using OPAL event
560[ 1.182943] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
561[ 1.185463] Non-volatile memory driver v1.3
562[ 1.185853] ahci 0002:01:00.0: version 3.0
563[ 1.185864] ahci 0002:01:00.0: enabling device (0541 -> 0543)
564[ 1.196036] ahci 0002:01:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
565[ 1.196041] ahci 0002:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
566[ 1.196576] scsi host0: ahci
567[ 1.196759] scsi host1: ahci
568[ 1.196884] scsi host2: ahci
569[ 1.197004] scsi host3: ahci
570[ 1.197075] ata1: SATA max UDMA/133 abar m2048@0x600c100000000 port 0x600c100000100 irq 30
571[ 1.197078] ata2: SATA max UDMA/133 abar m2048@0x600c100000000 port 0x600c100000180 irq 30
572[ 1.197080] ata3: SATA max UDMA/133 abar m2048@0x600c100000000 port 0x600c100000200 irq 30
573[ 1.197082] ata4: SATA max UDMA/133 abar m2048@0x600c100000000 port 0x600c100000280 irq 30
574[ 1.197239] libphy: Fixed MDIO Bus: probed
575[ 1.197360] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
576[ 1.197379] ehci-pci: EHCI PCI platform driver
577[ 1.197395] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
578[ 1.197418] ohci-pci: OHCI PCI platform driver
579[ 1.197433] uhci_hcd: USB Universal Host Controller Interface driver
580[ 1.197510] xhci_hcd 0003:01:00.0: xHCI Host Controller
581[ 1.197567] xhci_hcd 0003:01:00.0: new USB bus registered, assigned bus number 1
582[ 1.197682] xhci_hcd 0003:01:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x0000000004000000
583[ 1.198108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
584[ 1.198111] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
585[ 1.198113] usb usb1: Product: xHCI Host Controller
586[ 1.198115] usb usb1: Manufacturer: Linux 5.4.0-2.fc32.ppc64le xhci-hcd
587[ 1.198117] usb usb1: SerialNumber: 0003:01:00.0
588[ 1.198271] hub 1-0:1.0: USB hub found
589[ 1.198286] hub 1-0:1.0: 4 ports detected
590[ 1.198523] xhci_hcd 0003:01:00.0: xHCI Host Controller
591[ 1.198567] xhci_hcd 0003:01:00.0: new USB bus registered, assigned bus number 2
592[ 1.198571] xhci_hcd 0003:01:00.0: Host supports USB 3.0 SuperSpeed
593[ 1.198604] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
594[ 1.198653] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
595[ 1.198655] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
596[ 1.198658] usb usb2: Product: xHCI Host Controller
597[ 1.198660] usb usb2: Manufacturer: Linux 5.4.0-2.fc32.ppc64le xhci-hcd
598[ 1.198662] usb usb2: SerialNumber: 0003:01:00.0
599[ 1.198799] hub 2-0:1.0: USB hub found
600[ 1.198812] hub 2-0:1.0: 4 ports detected
601[ 1.199050] usbcore: registered new interface driver usbserial_generic
602[ 1.199059] usbserial: USB Serial support registered for generic
603[ 1.199357] mousedev: PS/2 mouse device common for all mice
604[ 1.200847] device-mapper: uevent: version 1.0.3
605[ 1.200927] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
606[ 1.201000] powernv-cpufreq: cpufreq pstate min 0x63 nominal 0x42 max 0x0
607[ 1.201001] powernv-cpufreq: Workload Optimized Frequency is enabled in the platform
608[ 1.202423] powernv_idle_driver registered
609[ 1.202442] hidraw: raw HID events driver (C) Jiri Kosina
610[ 1.202494] usbcore: registered new interface driver usbhid
611[ 1.202495] usbhid: USB HID core driver
612[ 1.202533] drop_monitor: Initializing network drop monitor service
613[ 1.202629] Initializing XFRM netlink socket
614[ 1.202841] NET: Registered protocol family 10
615[ 1.209183] Segment Routing with IPv6
616[ 1.209201] mip6: Mobile IPv6
617[ 1.209202] NET: Registered protocol family 17
618[ 1.209276] drmem: No dynamic reconfiguration memory found
619[ 1.209276] Running MSI bitmap self-tests ...
620[ 1.209383] registered taskstats version 1
621[ 1.209389] Loading compiled-in X.509 certificates
622[ 1.250092] Loaded X.509 cert 'Fedora kernel signing key: 426e9c4b37274568751d1143dfc26c43344f4fa3'
623[ 1.250123] zswap: loaded using pool lzo/zbud
624[ 1.250213] Key type ._fscrypt registered
625[ 1.250214] Key type .fscrypt registered
626[ 1.250289] pstore: Using crash dump compression: deflate
627[ 1.253778] Key type big_key registered
628[ 1.258033] Key type encrypted registered
629[ 1.258039] ima: No TPM chip found, activating TPM-bypass!
630[ 1.258043] ima: Allocated hash algorithm: sha256
631[ 1.258050] ima: No architecture policies found
632[ 1.258304] hctosys: unable to open rtc device (rtc0)
633[ 1.526052] ata3: SATA link down (SStatus 0 SControl 300)
634[ 1.526071] ata2: SATA link down (SStatus 0 SControl 300)
635[ 1.526099] ata1: SATA link down (SStatus 0 SControl 300)
636[ 1.564962] usb 1-1: new low-speed USB device number 2 using xhci_hcd
637[ 1.694966] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
638[ 1.701116] ata4.00: ATA-10: CT480BX500SSD1, M6CR022, max UDMA/133
639[ 1.701119] ata4.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
640[ 1.712857] ata4.00: configured for UDMA/133
641[ 1.713532] scsi 3:0:0:0: Direct-Access ATA CT480BX500SSD1 R022 PQ: 0 ANSI: 5
642[ 1.713735] sd 3:0:0:0: Attached scsi generic sg0 type 0
643[ 1.713840] sd 3:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
644[ 1.713859] sd 3:0:0:0: [sda] Write Protect is off
645[ 1.713863] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
646[ 1.713898] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
647[ 1.716764] sda:
648[ 1.717389] sd 3:0:0:0: [sda] Attached SCSI removable disk
649[ 1.719817] Freeing unused kernel memory: 5504K
650[ 1.719818] This architecture does not have kernel memory protection.
651[ 1.719819] Run /init as init process
652[ 1.734900] systemd[1]: System time before build time, advancing clock.
653[ 1.766811] systemd[1]: systemd v243.8-1.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
654[ 1.767976] systemd[1]: Detected architecture ppc64-le.
655[ 1.767979] systemd[1]: Running in initial RAM disk.
656[ 1.767998] systemd[1]: Set hostname to <power9>.
657[ 1.773814] usb 1-1: New USB device found, idVendor=046d, idProduct=c062, bcdDevice=31.00
658[ 1.773816] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
659[ 1.773819] usb 1-1: Product: USB Laser Mouse
660[ 1.773821] usb 1-1: Manufacturer: Logitech
661[ 1.805100] input: Logitech USB Laser Mouse as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-1/1-1:1.0/0003:046D:C062.0001/input/input0
662[ 1.805295] hid-generic 0003:046D:C062.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0003:01:00.0-1/input0
663[ 1.844723] random: systemd: uninitialized urandom read (16 bytes read)
664[ 1.844735] systemd[1]: Reached target Local File Systems.
665[ 1.844786] random: systemd: uninitialized urandom read (16 bytes read)
666[ 1.844793] systemd[1]: Reached target Slices.
667[ 1.844810] random: systemd: uninitialized urandom read (16 bytes read)
668[ 1.844817] systemd[1]: Reached target Swap.
669[ 1.844834] systemd[1]: Reached target Timers.
670[ 1.844988] systemd[1]: Listening on Journal Audit Socket.
671[ 1.845074] systemd[1]: Listening on Journal Socket (/dev/log).
672[ 1.863293] fuse: init (API version 7.31)
673[ 1.863320] *** VALIDATE fuse ***
674[ 1.863322] *** VALIDATE fuse ***
675[ 1.964417] usb 1-2: new full-speed USB device number 3 using xhci_hcd
676[ 2.166043] audit: type=1130 audit(1585229656.420:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
677[ 2.174149] audit: type=1130 audit(1585229656.420:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
678[ 2.187839] usb 1-2: New USB device found, idVendor=046d, idProduct=c33a, bcdDevice=14.00
679[ 2.187843] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
680[ 2.187846] usb 1-2: Product: G413 Carbon Mechanical Gaming Keyboard
681[ 2.187848] usb 1-2: Manufacturer: Logitech
682[ 2.187851] usb 1-2: SerialNumber: 0C7837483237
683[ 2.220191] input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2:1.0/0003:046D:C33A.0002/input/input1
684[ 2.284612] hid-generic 0003:046D:C33A.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0003:01:00.0-2/input0
685[ 2.293298] input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2:1.1/0003:046D:C33A.0003/input/input2
686[ 2.320416] audit: type=1130 audit(1585229656.570:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
687[ 2.354539] input: Logitech G413 Carbon Mechanical Gaming Keyboard Consumer Control as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-2/1-2:1.1/0003:046D:C33A.0003/input/input3
688[ 2.354687] hid-generic 0003:046D:C33A.0003: input,hiddev96,hidraw2: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0003:01:00.0-2/input1
689[ 2.421351] synth uevent: /devices/vio: failed to send uevent
690[ 2.421354] vio vio: uevent: failed to send synthetic uevent
691[ 2.425218] audit: type=1130 audit(1585229656.680:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
692[ 2.433572] nvme nvme0: pci function 0001:01:00.0
693[ 2.433598] nvme 0001:01:00.0: enabling device (0140 -> 0142)
694[ 2.443414] audit: type=1130 audit(1585229656.690:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
695[ 2.504425] usb 1-3: new high-speed USB device number 4 using xhci_hcd
696[ 2.665992] nvme nvme0: missing or invalid SUBNQN field.
697[ 2.666031] nvme nvme0: Shutdown timeout set to 8 seconds
698[ 2.686386] nvme nvme0: 16/0/0 default/read/poll queues
699[ 2.686969] usb 1-3: New USB device found, idVendor=1d6b, idProduct=0107, bcdDevice= 1.00
700[ 2.686972] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
701[ 2.686975] usb 1-3: Product: USB Virtual Hub
702[ 2.686978] usb 1-3: Manufacturer: Aspeed
703[ 2.686980] usb 1-3: SerialNumber: 00000000
704[ 2.694193] nvme0n1: p1 p2
705[ 2.703137] hub 1-3:1.0: USB hub found
706[ 2.703466] hub 1-3:1.0: 5 ports detected
707[ 2.854411] usb 1-4: new high-speed USB device number 5 using xhci_hcd
708[ 3.039197] usb 1-4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
709[ 3.039200] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
710[ 3.039203] usb 1-4: Product: USB2.0 Hub
711[ 3.055467] hub 1-4:1.0: USB hub found
712[ 3.056051] hub 1-4:1.0: 4 ports detected
713[ 3.134414] usb 1-3.1: new high-speed USB device number 6 using xhci_hcd
714[ 3.295250] usb 1-3.1: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 1.00
715[ 3.295253] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
716[ 3.295255] usb 1-3.1: Product: virtual_input
717[ 3.295258] usb 1-3.1: Manufacturer: OpenBMC
718[ 3.295260] usb 1-3.1: SerialNumber: OBMC0001
719[ 3.348780] input: OpenBMC virtual_input as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:1D6B:0104.0004/input/input6
720[ 3.384410] usb 1-4.4: new full-speed USB device number 7 using xhci_hcd
721[ 3.414803] hid-generic 0003:1D6B:0104.0004: input,hidraw3: USB HID v1.01 Keyboard [OpenBMC virtual_input] on usb-0003:01:00.0-3.1/input0
722[ 3.416862] input: OpenBMC virtual_input as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:1D6B:0104.0005/input/input7
723[ 3.417155] hid-generic 0003:1D6B:0104.0005: input,hidraw4: USB HID v1.01 Mouse [OpenBMC virtual_input] on usb-0003:01:00.0-3.1/input1
724[ 3.537046] usb 1-4.4: New USB device found, idVendor=0d8c, idProduct=0102, bcdDevice= 0.10
725[ 3.537050] usb 1-4.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
726[ 3.537052] usb 1-4.4: Product: USB Sound Device
727[ 3.554796] input: USB Sound Device as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.4/1-4.4:1.3/0003:0D8C:0102.0006/input/input8
728[ 3.624514] hid-generic 0003:0D8C:0102.0006: input,hidraw5: USB HID v1.00 Device [USB Sound Device ] on usb-0003:01:00.0-4.4/input3
729[ 3.658368] random: fast init done
730[ 4.067516] audit: type=1130 audit(1585229658.320:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
731[ 4.100136] audit: type=1130 audit(1585229658.350:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
732[ 4.134623] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
733[ 4.363463] audit: type=1130 audit(1585229658.610:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
734[ 4.363472] audit: type=1131 audit(1585229658.610:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
735[ 4.600218] systemd-journald[304]: Received SIGTERM from PID 1 (systemd).
736[ 4.623074] printk: systemd: 24 output lines suppressed due to ratelimiting
737[ 5.117414] SELinux: Permission watch in class filesystem not defined in policy.
738[ 5.117419] SELinux: Permission watch in class file not defined in policy.
739[ 5.117420] SELinux: Permission watch_mount in class file not defined in policy.
740[ 5.117420] SELinux: Permission watch_sb in class file not defined in policy.
741[ 5.117421] SELinux: Permission watch_with_perm in class file not defined in policy.
742[ 5.117422] SELinux: Permission watch_reads in class file not defined in policy.
743[ 5.117425] SELinux: Permission watch in class dir not defined in policy.
744[ 5.117426] SELinux: Permission watch_mount in class dir not defined in policy.
745[ 5.117427] SELinux: Permission watch_sb in class dir not defined in policy.
746[ 5.117427] SELinux: Permission watch_with_perm in class dir not defined in policy.
747[ 5.117428] SELinux: Permission watch_reads in class dir not defined in policy.
748[ 5.117432] SELinux: Permission watch in class lnk_file not defined in policy.
749[ 5.117433] SELinux: Permission watch_mount in class lnk_file not defined in policy.
750[ 5.117434] SELinux: Permission watch_sb in class lnk_file not defined in policy.
751[ 5.117434] SELinux: Permission watch_with_perm in class lnk_file not defined in policy.
752[ 5.117435] SELinux: Permission watch_reads in class lnk_file not defined in policy.
753[ 5.117438] SELinux: Permission watch in class chr_file not defined in policy.
754[ 5.117439] SELinux: Permission watch_mount in class chr_file not defined in policy.
755[ 5.117439] SELinux: Permission watch_sb in class chr_file not defined in policy.
756[ 5.117440] SELinux: Permission watch_with_perm in class chr_file not defined in policy.
757[ 5.117440] SELinux: Permission watch_reads in class chr_file not defined in policy.
758[ 5.117443] SELinux: Permission watch in class blk_file not defined in policy.
759[ 5.117444] SELinux: Permission watch_mount in class blk_file not defined in policy.
760[ 5.117444] SELinux: Permission watch_sb in class blk_file not defined in policy.
761[ 5.117445] SELinux: Permission watch_with_perm in class blk_file not defined in policy.
762[ 5.117446] SELinux: Permission watch_reads in class blk_file not defined in policy.
763[ 5.117448] SELinux: Permission watch in class sock_file not defined in policy.
764[ 5.117449] SELinux: Permission watch_mount in class sock_file not defined in policy.
765[ 5.117450] SELinux: Permission watch_sb in class sock_file not defined in policy.
766[ 5.117450] SELinux: Permission watch_with_perm in class sock_file not defined in policy.
767[ 5.117451] SELinux: Permission watch_reads in class sock_file not defined in policy.
768[ 5.117454] SELinux: Permission watch in class fifo_file not defined in policy.
769[ 5.117454] SELinux: Permission watch_mount in class fifo_file not defined in policy.
770[ 5.117455] SELinux: Permission watch_sb in class fifo_file not defined in policy.
771[ 5.117455] SELinux: Permission watch_with_perm in class fifo_file not defined in policy.
772[ 5.117456] SELinux: Permission watch_reads in class fifo_file not defined in policy.
773[ 5.117600] SELinux: the above unknown classes and permissions will be allowed
774[ 5.117602] SELinux: policy capability network_peer_controls=1
775[ 5.117602] SELinux: policy capability open_perms=1
776[ 5.117603] SELinux: policy capability extended_socket_class=1
777[ 5.117603] SELinux: policy capability always_check_network=0
778[ 5.117604] SELinux: policy capability cgroup_seclabel=1
779[ 5.117604] SELinux: policy capability nnp_nosuid_transition=1
780[ 5.168617] kauditd_printk_skb: 21 callbacks suppressed
781[ 5.168618] audit: type=1403 audit(1585229659.420:32): auid=4294967295 ses=4294967295 lsm=selinux res=1
782[ 5.173479] systemd[1]: Successfully loaded SELinux policy in 516.663ms.
783[ 5.241260] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 43.776ms.
784[ 5.243019] systemd[1]: systemd v243.8-1.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
785[ 5.244500] systemd[1]: Detected architecture ppc64-le.
786[ 5.244659] systemd[1]: Set hostname to <power9>.
787[ 5.359037] systemd[1]: /usr/lib/systemd/system/sssd.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly.
788[ 5.363709] systemd[1]: /usr/lib/systemd/system/iscsid.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsid.pid → /run/iscsid.pid; please update the unit file accordingly.
789[ 5.363996] systemd[1]: /usr/lib/systemd/system/iscsiuio.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsiuio.pid → /run/iscsiuio.pid; please update the unit file accordingly.
790[ 5.366102] systemd[1]: /usr/lib/systemd/system/libvirtd-admin.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-admin-sock → /run/libvirt/libvirt-admin-sock; please update the unit file accordingly.
791[ 5.366548] systemd[1]: /usr/lib/systemd/system/libvirtd-ro.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock-ro → /run/libvirt/libvirt-sock-ro; please update the unit file accordingly.
792[ 5.366966] systemd[1]: /usr/lib/systemd/system/libvirtd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock → /run/libvirt/libvirt-sock; please update the unit file accordingly.
793[ 5.367283] systemd[1]: /usr/lib/systemd/system/virtlockd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock; please update the unit file accordingly.
794[ 5.476831] audit: type=1131 audit(1585229659.730:33): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
795[ 5.477528] audit: type=1130 audit(1585229659.730:34): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
796[ 5.477546] audit: type=1131 audit(1585229659.730:35): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
797[ 5.494280] audit: type=1131 audit(1585229659.740:36): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
798[ 5.494791] audit: type=1130 audit(1585229659.750:37): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
799[ 5.494805] audit: type=1131 audit(1585229659.750:38): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
800[ 5.503726] audit: type=1130 audit(1585229659.750:39): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
801[ 5.504596] audit: type=1130 audit(1585229659.760:40): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-convert comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
802[ 5.504615] audit: type=1131 audit(1585229659.760:41): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-convert comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
803[ 5.516370] EXT4-fs (dm-0): re-mounted. Opts: (null)
804[ 5.574440] Adding 33464256k swap on /dev/mapper/fedora-swap. Priority:-2 extents:1 across:33464256k SSFS
805[ 5.627635] synth uevent: /devices/vio: failed to send uevent
806[ 5.627637] vio vio: uevent: failed to send synthetic uevent
807[ 5.769252] systemd-journald[633]: Received client request to flush runtime journal.
808[ 5.770167] systemd-journald[633]: File /var/log/journal/422590b6c4c440f7854281b95b9a8f1a/system.journal corrupted or uncleanly shut down, renaming and replacing.
809[ 6.011965] IPMI message handler: version 39.2
810[ 6.015746] ipmi device interface
811[ 6.027704] tg3.c:v3.137 (May 11, 2014)
812[ 6.027719] tg3 0004:01:00.0: enabling device (0140 -> 0142)
813[ 6.034634] rtc-opal opal-rtc: registered as rtc0
814[ 6.037804] 5 fixed-partitions partitions found on MTD device flash@0
815[ 6.037807] Creating 5 MTD partitions on "flash@0":
816[ 6.037811] 0x000000000000-0x000004000000 : "PNOR"
817[ 6.038111] 0x0000022a1000-0x000003821000 : "BOOTKERNEL"
818[ 6.038272] 0x000003944000-0x000003946000 : "VERSION"
819[ 6.038464] 0x000003989000-0x0000039c9000 : "IMA_CATALOG"
820[ 6.038647] 0x000003e10000-0x000003ff0000 : "BOOTKERNFW"
821[ 6.039567] ipmi-powernv ibm,opal:ipmi: IPMI message handler: The GUID response from the BMC was too short, it was 1 but should have been 17. Assuming GUID is not available.
822[ 6.053093] ipmi-powernv ibm,opal:ipmi: IPMI message handler: Found new BMC (man_id: 0x00cb06, prod_id: 0x0001, dev_id: 0x00)
823[ 6.061777] tg3 0004:01:00.0 eth0: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:0a:3e
824[ 6.061782] tg3 0004:01:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
825[ 6.061786] tg3 0004:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
826[ 6.061788] tg3 0004:01:00.0 eth0: dma_rwctrl[00000000] dma_mask[64-bit]
827[ 6.061947] tg3 0004:01:00.1: enabling device (0140 -> 0142)
828[ 6.091815] tg3 0004:01:00.1 eth1: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:0a:3f
829[ 6.091821] tg3 0004:01:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
830[ 6.091824] tg3 0004:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
831[ 6.091827] tg3 0004:01:00.1 eth1: dma_rwctrl[00000000] dma_mask[64-bit]
832[ 6.091992] tg3 0004:01:00.2: enabling device (0140 -> 0142)
833[ 6.130251] tg3 0004:01:00.2 eth2: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:0a:40
834[ 6.130257] tg3 0004:01:00.2 eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
835[ 6.130260] tg3 0004:01:00.2 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
836[ 6.130263] tg3 0004:01:00.2 eth2: dma_rwctrl[00000000] dma_mask[64-bit]
837[ 6.147491] snd_hda_intel 0000:03:00.1: enabling device (0540 -> 0542)
838[ 6.147503] snd_hda_intel 0000:03:00.1: Force to snoop mode by module option
839[ 6.167667] checking generic (600c280010000 300000) vs hw (600c280000000 1000000)
840[ 6.167670] fb0: switching to astdrmfb from OFfb vga
841[ 6.168101] [drm] platform has no IO space, trying MMIO
842[ 6.168109] [drm] Using device-tree for configuration
843[ 6.168111] [drm] AST 2500 detected
844[ 6.168115] [drm] Using Sil164 TMDS transmitter
845[ 6.168121] [drm] dram MCLK=800 Mhz type=7 bus_width=16 size=01000000
846[ 6.168404] [TTM] Zone kernel: Available graphics memory: 33396128 KiB
847[ 6.168405] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
848[ 6.168406] [TTM] Initializing pool allocator
849[ 6.168416] [TTM] Initializing DMA pool allocator
850[ 6.171124] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input9
851[ 6.172080] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input10
852[ 6.172132] fbcon: Deferring console take-over
853[ 6.172137] ast 0005:02:00.0: fb0: astdrmfb frame buffer device
854[ 6.172197] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input11
855[ 6.172297] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input12
856[ 6.172395] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input13
857[ 6.172494] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input14
858[ 6.246207] at24 0-0050: 65536 byte 24c512 EEPROM, writable, 1 bytes/write
859[ 6.248360] tg3 0004:01:00.0 enP4p1s0f0: renamed from eth0
860[ 6.284754] [drm] Initialized ast 0.1.0 20120228 for 0005:02:00.0 on minor 0
861[ 6.292972] at24 2-0050: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
862[ 6.306343] at24 3-0050: 256 byte spd EEPROM, read-only, 0 bytes/write
863[ 6.306556] at24 4-0054: 256 byte spd EEPROM, read-only, 0 bytes/write
864[ 6.313119] random: crng init done
865[ 6.313120] random: 7 urandom warning(s) missed due to ratelimiting
866[ 6.336049] tg3 0004:01:00.2 enP4p1s0f2: renamed from eth2
867[ 6.496064] [drm] amdgpu kernel modesetting enabled.
868[ 6.496099] amdgpu 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 0: 0x6000000000000 -> 0x600000fffffff
869[ 6.496101] amdgpu 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 2: 0x6000010000000 -> 0x60000101fffff
870[ 6.496103] amdgpu 0000:03:00.0: remove_conflicting_pci_framebuffers: bar 5: 0x600c000000000 -> 0x600c00007ffff
871[ 6.496125] amdgpu 0000:03:00.0: enabling device (0140 -> 0142)
872[ 6.496385] [drm] initializing kernel modesetting (NAVI14 0x1002:0x7340 0x1DA2:0xE421 0xC5).
873[ 6.496391] [drm] register mmio base: 0x00000000
874[ 6.496391] [drm] register mmio size: 524288
875[ 6.496392] [drm] PCI I/O BAR is not found.
876[ 6.496399] [drm] PCIE atomic ops is not supported
877[ 6.510292] [drm] set register base offset for ATHUB
878[ 6.510293] [drm] set register base offset for CLKA
879[ 6.510293] [drm] set register base offset for CLKA
880[ 6.510294] [drm] set register base offset for CLKA
881[ 6.510294] [drm] set register base offset for CLKA
882[ 6.510295] [drm] set register base offset for CLKA
883[ 6.510296] [drm] set register base offset for DF
884[ 6.510297] [drm] set register base offset for DMU
885[ 6.510298] [drm] set register base offset for GC
886[ 6.510298] [drm] set register base offset for HDP
887[ 6.510299] [drm] set register base offset for MMHUB
888[ 6.510300] [drm] set register base offset for MP0
889[ 6.510300] [drm] set register base offset for MP1
890[ 6.510301] [drm] set register base offset for NBIF
891[ 6.510301] [drm] set register base offset for NBIF
892[ 6.510302] [drm] set register base offset for OSSSYS
893[ 6.510303] [drm] set register base offset for SDMA0
894[ 6.510303] [drm] set register base offset for SDMA1
895[ 6.510304] [drm] set register base offset for SMUIO
896[ 6.510305] [drm] set register base offset for THM
897[ 6.510305] [drm] set register base offset for UVD
898[ 6.510307] [drm] add ip block number 0 <nv_common>
899[ 6.510308] [drm] add ip block number 1 <gmc_v10_0>
900[ 6.510309] [drm] add ip block number 2 <navi10_ih>
901[ 6.510309] [drm] add ip block number 3 <psp>
902[ 6.510310] [drm] add ip block number 4 <smu>
903[ 6.510311] [drm] add ip block number 5 <dm>
904[ 6.510312] [drm] add ip block number 6 <gfx_v10_0>
905[ 6.510312] [drm] add ip block number 7 <sdma_v5_0>
906[ 6.510313] [drm] add ip block number 8 <vcn_v2_0>
907[ 6.544667] tg3 0004:01:00.1 enP4p1s0f1: renamed from eth1
908[ 6.545263] ATOM BIOS: 113-E4210MB-U0B
909[ 6.545273] [drm] VCN decode is enabled in VM mode
910[ 6.545274] [drm] VCN encode is enabled in VM mode
911[ 6.545274] [drm] VCN jpeg decode is enabled in VM mode
912[ 6.545280] [drm] GPU posting now...
913[ 6.545328] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
914[ 6.545350] amdgpu 0000:03:00.0: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used)
915[ 6.545352] amdgpu 0000:03:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
916[ 6.545356] [drm] Detected VRAM RAM=8176M, BAR=256M
917[ 6.545357] [drm] RAM width 128bits GDDR6
918[ 6.545372] [drm] amdgpu: 8176M of VRAM memory ready
919[ 6.545375] [drm] amdgpu: 8176M of GTT memory ready.
920[ 6.545400] [drm] GART: num cpu pages 8192, num gpu pages 131072
921[ 6.545475] [drm] PCIE GART of 512M enabled (table at 0x0000008000000000).
922[ 6.549675] [drm] use_doorbell being set to: [true]
923[ 6.549710] [drm] use_doorbell being set to: [true]
924[ 6.550063] [drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 17
925[ 6.550068] [drm] PSP loading VCN firmware
926[ 7.094454] [drm] reserve 0xa00000 from 0x81fe400000 for PSP TMR
927[ 7.121532] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
928[ 7.269405] RPC: Registered named UNIX socket transport module.
929[ 7.269406] RPC: Registered udp transport module.
930[ 7.269407] RPC: Registered tcp transport module.
931[ 7.269407] RPC: Registered tcp NFSv4.1 backchannel transport module.
932[ 7.624932] amdgpu: [powerplay] smu driver if version = 0x00000034, smu fw if version = 0x00000036, smu fw version = 0x00351b00 (53.27.0)
933[ 7.624935] amdgpu: [powerplay] SMU driver if version not matched
934[ 7.636753] amdgpu: [powerplay] SMU is initialized successfully!
935[ 7.637630] [drm] Display Core initialized with v3.2.48!
936[ 7.637812] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
937[ 7.657572] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
938[ 7.657573] [drm] Driver supports precise vblank timestamp query.
939[ 7.658272] [drm] kiq ring mec 2 pipe 1 q 0
940[ 7.658391] [drm] ring test on 10 succeeded in 60 usecs
941[ 7.658442] [drm] ring test on 10 succeeded in 17 usecs
942[ 7.658511] [drm] gfx 0 ring me 0 pipe 0 q 0
943[ 7.658538] [drm] ring test on 0 succeeded in 12 usecs
944[ 7.658541] [drm] gfx 1 ring me 0 pipe 1 q 0
945[ 7.658551] [drm] ring test on 1 succeeded in 3 usecs
946[ 7.658553] [drm] compute ring 0 mec 1 pipe 0 q 0
947[ 7.658567] [drm] ring test on 2 succeeded in 5 usecs
948[ 7.658569] [drm] compute ring 1 mec 1 pipe 1 q 0
949[ 7.658578] [drm] ring test on 3 succeeded in 2 usecs
950[ 7.658579] [drm] compute ring 2 mec 1 pipe 2 q 0
951[ 7.658589] [drm] ring test on 4 succeeded in 2 usecs
952[ 7.658591] [drm] compute ring 3 mec 1 pipe 3 q 0
953[ 7.658603] [drm] ring test on 5 succeeded in 2 usecs
954[ 7.658604] [drm] compute ring 4 mec 1 pipe 0 q 1
955[ 7.658613] [drm] ring test on 6 succeeded in 2 usecs
956[ 7.658615] [drm] compute ring 5 mec 1 pipe 1 q 1
957[ 7.658623] [drm] ring test on 7 succeeded in 2 usecs
958[ 7.658625] [drm] compute ring 6 mec 1 pipe 2 q 1
959[ 7.658633] [drm] ring test on 8 succeeded in 2 usecs
960[ 7.658635] [drm] compute ring 7 mec 1 pipe 3 q 1
961[ 7.658643] [drm] ring test on 9 succeeded in 2 usecs
962[ 7.658701] [drm] ring test on 11 succeeded in 6 usecs
963[ 7.658723] [drm] ring test on 12 succeeded in 6 usecs
964[ 7.685067] [drm] VCN decode and encode initialized successfully(under DPG Mode).
965[ 7.686631] [drm] fb mappable at 0x6000000290000
966[ 7.686632] [drm] vram apper at 0x6000000000000
967[ 7.686633] [drm] size 8323072
968[ 7.686635] [drm] fb depth is 24
969[ 7.686636] [drm] pitch is 7680
970[ 7.686774] fbcon: Deferring console take-over
971[ 7.686779] amdgpu 0000:03:00.0: fb1: amdgpudrmfb frame buffer device
972[ 7.686976] amdgpu 0000:03:00.0: ring 0(gfx_0.0.0) uses VM inv eng 4 on hub 0
973[ 7.686979] amdgpu 0000:03:00.0: ring 1(gfx_0.1.0) uses VM inv eng 5 on hub 0
974[ 7.686981] amdgpu 0000:03:00.0: ring 2(comp_1.0.0) uses VM inv eng 6 on hub 0
975[ 7.686984] amdgpu 0000:03:00.0: ring 3(comp_1.1.0) uses VM inv eng 7 on hub 0
976[ 7.686987] amdgpu 0000:03:00.0: ring 4(comp_1.2.0) uses VM inv eng 8 on hub 0
977[ 7.686990] amdgpu 0000:03:00.0: ring 5(comp_1.3.0) uses VM inv eng 9 on hub 0
978[ 7.686993] amdgpu 0000:03:00.0: ring 6(comp_1.0.1) uses VM inv eng 10 on hub 0
979[ 7.686996] amdgpu 0000:03:00.0: ring 7(comp_1.1.1) uses VM inv eng 11 on hub 0
980[ 7.686999] amdgpu 0000:03:00.0: ring 8(comp_1.2.1) uses VM inv eng 12 on hub 0
981[ 7.687002] amdgpu 0000:03:00.0: ring 9(comp_1.3.1) uses VM inv eng 13 on hub 0
982[ 7.687004] amdgpu 0000:03:00.0: ring 10(kiq_2.1.0) uses VM inv eng 14 on hub 0
983[ 7.687008] amdgpu 0000:03:00.0: ring 11(sdma0) uses VM inv eng 15 on hub 0
984[ 7.687011] amdgpu 0000:03:00.0: ring 12(sdma1) uses VM inv eng 16 on hub 0
985[ 7.687014] amdgpu 0000:03:00.0: ring 13(vcn_dec) uses VM inv eng 4 on hub 1
986[ 7.687017] amdgpu 0000:03:00.0: ring 14(vcn_enc0) uses VM inv eng 5 on hub 1
987[ 7.687019] amdgpu 0000:03:00.0: ring 15(vcn_enc1) uses VM inv eng 6 on hub 1
988[ 7.687022] amdgpu 0000:03:00.0: ring 16(vcn_jpeg) uses VM inv eng 7 on hub 1
989[ 7.687191] [drm] Initialized amdgpu 3.35.0 20150101 for 0000:03:00.0 on minor 1
990[ 8.742459] tg3 0004:01:00.2 enP4p1s0f2: Link is up at 1000 Mbps, full duplex
991[ 8.742461] tg3 0004:01:00.2 enP4p1s0f2: Flow control is on for TX and on for RX
992[ 8.742463] tg3 0004:01:00.2 enP4p1s0f2: EEE is disabled
993[ 8.743124] IPv6: ADDRCONF(NETDEV_CHANGE): enP4p1s0f2: link becomes ready
994[ 9.756349] [drm] ib test on ring 0 succeeded
995[ 9.756415] [drm] ib test on ring 1 succeeded
996[ 9.756525] [drm] ib test on ring 2 succeeded
997[ 9.756582] [drm] ib test on ring 3 succeeded
998[ 9.756635] [drm] ib test on ring 4 succeeded
999[ 9.756688] [drm] ib test on ring 5 succeeded
1000[ 9.756741] [drm] ib test on ring 6 succeeded
1001[ 9.756793] [drm] ib test on ring 7 succeeded
1002[ 9.756845] [drm] ib test on ring 8 succeeded
1003[ 9.756898] [drm] ib test on ring 9 succeeded
1004[ 9.756949] [drm] ib test on ring 10 succeeded
1005[ 9.757009] [drm] ib test on ring 11 succeeded
1006[ 9.757065] [drm] ib test on ring 12 succeeded
1007[ 10.311309] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
1008[ 10.318635] tun: Universal TUN/TAP device driver, 1.6
1009[ 10.319782] virbr0: port 1(virbr0-nic) entered blocking state
1010[ 10.319784] virbr0: port 1(virbr0-nic) entered disabled state
1011[ 10.319841] device virbr0-nic entered promiscuous mode
1012[ 10.366364] systemd-journald[633]: File /var/log/journal/422590b6c4c440f7854281b95b9a8f1a/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
1013[ 10.627176] virbr0: port 1(virbr0-nic) entered blocking state
1014[ 10.627180] virbr0: port 1(virbr0-nic) entered listening state
1015[ 10.669552] virbr0: port 1(virbr0-nic) entered disabled state
1016[ 10.859183] broken atomic modeset userspace detected, disabling atomic
1017[ 13.253909] snd_hda_intel 0000:03:00.1: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
1018[ 14.715390] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.